Technical Data Touringline Compact

Transcript

Technical Data TouringLine Compact we amplify emotions. TouringLine Comp 2 ad-systems // we amplify emotions General Information 1 2 3 4 5 6 A A B B C C UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: NAME DEBUR AND BREAK SHARP EDGES FINISH: SIGNATURE DATE DO NOT SCALE DRAWING REVISION TITLE: DRAWN CHK'D D APPV'D MFG Q.A 1 2 MATERIAL: WEIGHT: TL 2614-06092011 DWG NO. SCALE:1:10 SHEET 1 OF 1 A4 The TouringLineCompact incorporates two 6.5“ neodymium low mid speakers and one 1.4“ neodymium high frequency compression driver in a extremely compact, Polyurea coated enclosure. The physical spacing of the sources has been optimized as such, that a very homogeneous directivity pattern is achieved. The two low mid speakers are flanking the high frequency wave guide at both sides and are coupled to the surrounding via short horn flares and phase plugs. In this way it was possible to reduce the spacing of the virual sources to an absolute minimum, to add some sensitivity and to optimize the crossover frequency. The high frequency wave guide has been designed by using the latest BEM (boundary element method) techniques and generates a planar wavefront up to 16 kHz. Corresponding with the TouringLineCompact‘s field of application a module splay of up to 15° is possible. Its ultra compact latest generation 1.4“ neodymium compression driver offers the nescessary headroom easily. Both ways are combined in correct phase through a complex, passive crossover network. The nominal system impedance of 12 Ohms enables the powering of up to twelve modules at a modern two channel amplifier. Our AD-Systems Impulse system amplifiers are offering all nescessary signal processing ensuring maximum operational safety and first class sound quality. As with the TouringLine also the TouringLineCompact uses the proven and excellently to handle „Quick-Rig“ system. The rigging of the less than 15 kilogrammes weighting modules can be done by a single person. By applying highly loadable T6 almuminium hardware it was possible to certify the safe rigging of up to 16 modules according to the strict BGV C1 requirements. For easy and secure transportation an optional Tourcase is offered, which takes up four elements including a rigging bumper. The Tourcase‘s outer dimensions are fit to the Euro-Pallet standard trucking grid. Application FOH system for audiences of 500 - 5,000 people Sidefill / Outfill for large stages Fixed installation Scalable up to 16 elements Features Very compact, elegant and light weight design 2x 6,5“ high performance neodymium low mid speakers 1.4“ high performance neodymium compression driver Polyurea coated enclosure made of heavy-duty birch plywood, equipped with T6 alloy fittings TouringLine Comp Specifications Performance data Basic layout 2-way, bassreflex, semi-active Frequency response (-6 dB) 90 Hz - 17 kHz Sensitivity 1W @ 1 m 95 dB (full space) Maximum SPL 127 dB (peak @ 1 m, single element) Horizontal coverage (-6 dB) 90° Vertical coverage (-6 dB) 15° (nominal, array dependent) Power handling RMS 400 W programme 800 W peak 1,600 W Nominal impedance 12 Ω Transducers / Components Low mid frequency 2x 6.5“ Nd woofer w/ 1.8“ voice coil, membrane w/ moisture repellent coating Nominal impedance 12 Ω Power handling 400 W AES / 1,600 W Peak Sensitivity 95 dB, 1W @ 1W High frequency 1.4“ Nd compression driver w/ 2.4“ voice coil Nominal impedance 16 Ω Power handling 75 W AES / 300 W Peak Sensitivity 110 dB, 1W @ 1m Horn DoubleV Waveformer, 90°x 15° Crossover 2-way crossover w/ phase correction, division w/ 12dB/12dB at about 1.1 kHz Physical data Enclosure trapezoidal shape, side angles 7,5° each, 12/15mm birch plywood, Polyurea coated Rigging hardware Quick Rig hardware made of T6 Aluminum anodised black Colour black, white, RAL standard colours Protective grille sheet steel w/ 2mm thickness, hex-stamped, powder coated, black acoustic foam on inside Connectors 3 x Speakon NL4 MP (1+/1-) Dimensions (W x H x D) 500 x 216 x 355 mm Net weight 14 kg 3 TouringLine Comp 4 ad-systems // we amplify emotions Measurement Data Processed frequency response Impedance [dB] Sound pressure [ohm] Impedance 115 80 110 72 105 64 100 56 95 48 90 40 85 32 80 24 75 16 70 8 65 20 50 200 100 500 iF: 1x TouringLineCompact Fullrange Mode 1k 2k 5k 20k 10k Frequency [Hz] 0 50 100 200 500 1k 2k 5k 10k 20k Frequency [Hz] iF: TouringLineCompact Impedance Horizontal coverage pattern Vertical coverage pattern [deg] Axial angle [deg] Axial angle AD TouringLine Compact Horizontal [dB] 180 3 165 150 150 135 0 120 AD TouringLine Compact Vertical [dB] 180 165 3 135 0 120 105 105 -3 90 75 60 60 -6 45 45 30 30 -9 15 0 -3 90 75 -6 -9 15 0 -15 -12 -15 -30 -30 -45 -45 -15 -60 -12 -15 -60 -75 -75 -90 -18 -90 -105 -105 -120 -120 -135 -21 -150 -165 -24 100 200 500 1k 2k 5k 10k 20k Frequency [Hz] -18 -135 -150 -165 -180 20 iF: 3x TouringLineCompact Fullrange Mode -180 -21 -24 100 200 500 1k 2k 5k Notes on performance data and graphs: 1) Performance Specifications: All acoustic specifications rounded to nearest whole number. Either AD Impulse DSP Amplifiers or external DSP with provided settings are required to achieve the specified performance. 2) Frequency response: Range of the processed response, where the level stays within 6dB from nominal sensitivity. 3) Power Handling: Is based on the AES power handling of the transducers. 4) Nominal Sensitivity: SPL produced by the unit at 1 Watt at nominal impedance, referenced to 1 Meter. Measurement condition: Full space in the far field of the speaker. Time-windowed to approximate an anechoic environment. 5) Maximum SPL: Calculated from nominal sensitivity at stated peak input power. 6) Resolution: For better readability a 1/6 octave smoothing is applied to all response graphs shown. All data provided are subject to change without prior notice. 10k 20k Frequency [Hz] TouringLine Comp 5 Accessories For easy handling and operation in all possible applications there are various means of transportation and rigging available. The TouringLineCompact bumper enables flying of up to 16 TouringLineCompact elements and is certified according to the BGV C1 requirements. For safe and easy transportation of up to four TouringLineCompact elements including bumper and small parts a Tourcase is available. It is equipped with four swivel castors and fits to the Euro-Pallet trucking grid (0.6 x 0.8 m footprint). 1 2 3 4 5 6 A B 1 2 4 3 6 5 7 8 A A B B C C C UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: D NAME DEBUR AND BREAK SHARP EDGES FINISH: DO NOT SCALE DRAWING REVISION D SIGNATURE DATE TITLE: DRAWN CHK'D D APPV'D E MFG MATERIAL: Q.A UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: NAME TLC Bumper Zeichnu DWG NO. DEBUR AND BREAK SHARP EDGES FINISH: SIGNATURE DATE DO NOT SCALE DRAWING 1 2 CHK'D WEIGHT: SCALE:1:10 APPV'D F MFG Q.A 1 2 3 4 REVISION TITLE: DRAWN MATERIAL: WEIGHT: A3 kugelsperrbolzen 10mm DWG NO. SCALE:1:1 7011000807 TouringLine Compact Quad Tourcase 7011000808 TouringLine Compact Bumper 7011000825 Ball locking pin 8mm SHEET 1 OF 1 SHEET 1 OF 1 6 TouringLine Comp ad-systems // we amplify emotions Drawings Spare parts 7100000510 6,5“ LF woofer n/a 6,5“ Recone kit 7100000509 1.4“ (35mm) Compression Driver tba. 1.4“ Diaphragm tba. X-Over TouringLine Compact 7100000511 spare grille TouringLine Comp Architectural & Engineering Specifications The professional 2-way fullrange loudspeaker system shall incorporate two 6.5 inch neodymium LF transducers and a 1.4 inch exit neodymium HF compression driver. The acoustic design shall be optimized for the use as a line source vertical array. The LF speakers shall be mounted in a vented enclosure tuned for optimum low frequency response and separated horizontally. The HF driver shall be coupled to a constant directivity waveformer with a nominal coverage pattern of 90° (h) x 15° (v). The loudspeaker shall withstand short peaks of up to 1,600 Watt generating a maximum sound presure level of 127 dB. System frequency responste shall vary no more than +/-3dB from 90 Hz to 17 kHz measured on axis. The loudspeaker enclosure shall be trapezoidal in shape, constructed of weatherproof Baltic birch plywood and finished in black Polyurea coating. Optionally all RAL standard colours shall be available. The loudspeaker components shall be protected by a powder coated grille made of hex-stamped steel sheet and internally attached acoustic foam in appropiate colour. Flexible and easy to use rigging hardware made of black anodized T6 aluminium shall be provided. Suspended application shall be possible with a seperately available rigging cradle (bumper). Flying hardware and cradle shall be certified according to BGV C1 regulations for an application of up to 16 elements per rig. CAAD simulation data for ULYSSES and EASE suites shall be available. The loudspeaker system shall be the AD-Systems TouringLineCompact. Optional features: Flying cradle (bumper) for max. 16 elements; Transport case w/ Euro-Pallet compatible trucking dimensions, equiped w/ 100mm swivel castors, suitable for max. 4 elements incl. bumper and small parts Special colours: all standard RAL colours Technical specifications: Acoustical design: Line source, passive loudspeaker, 2-way, bass reflex / horn loaded Components: 2x 6.5“ low-mid woofer w/ 1.8“ voice coil / 1.4“ high frequency driver w/ 2.4“ voice coil on DoubleV waveformer Power handling (nominal): 400 W Power handling (programme): 800 W Power handling (peak): 1,600 W Nominal sensitivity: 95 dB (90Hz - 1kHz), 110 dB (1kHz-10kHz) Maximum Sound Pressure Level (SPL): 127 dB, single element Frequency response: 90 Hz – 17 kHz Nominal coverage pattern (h x v): 90° x 15° Nominal impedance: 12 Ohms Features: Enclosure: 12mm / 15mm Baltic birch plywood, trapezoidal shape, Polyurea coated Protective grille: hex-stamped steel sheet, powder coated Rigging hardware: T6 Aluminium, anodized black Connectors: 3x Neutrik NL4 Speakon Front design: acoustic foam in appropriate colour behind the grille Dimensions (W x H x D): 500 x216x 355 mm Net weight: 14 kg CAAD simulation data: ULYSSES, EASE Brand: AD-Systems Model: TouringLineCompact 7 8 TouringLine Comp ad-systems // we amplify emotions For more information please visit our website! There you will find also: Autocad Files (DXF, DWG, PDF) Measurement data for acoustical simulation in Ease and Ulysses Manuals Architectural & Engineering Specs AD-Systems Audiotechnik GmbH Am Schornacker 11c D-46485 Wesel T: +49 (0) 281 4 60 90 7-0 F: +49 (0) 281 4 60 90 7-22 E: [email protected] W: www.ad-systems.com Der Inhalt dieser technischen Information wurde nach dem aktuellem Stand der Technik und mit größter Sorgfalt angefertigt. Eine Haftung für mögliche Irrtümer und Fehler, die aus dieser technischen Information abgeleitet werden, lehnt AD-Systems Audiotechnik GmbH ab. As part of a policy of continual improvement, AD-Systems reserves the right to change specifications witout notice.