Preview only show first 10 pages with watermark. For full document please download

Technical Faq

   EMBED


Share

Transcript

September 2004 IMC Networks iMediaChassis/20 Competitive Comparison Transition’s Point System Chassis iMediaChassis/20 — Description • 20-slot, 3u high and 19" wide rack mount conversion system • SNMP compliant • Includes additional slot for SNMP management module • Rear mounted AC or DC power options • Supports a second redundant power supply (PSU) • Carries IMC Networks 6-year warranty Point System — Description • 19-slot, 2u high and 19" wide rack mount conversion system • SNMP compliant • Rear mounted AC or DC power options • Supports a second redundant PSU • Carries Transitions limited lifetime warranty iMediaChassis/20 — Functionality • Supports a 10/100 RJ-45 Ethernet interface • Out of band (RS-232) interface or telnet • DHCP client allows automatic configuration of initial settings (IP address) • In-band firmware upgrades via the Ethernet connection to the SNMP management board • TFTP client allows remote firmware upgrades • Ability to validate firmware version during upgrades Point System — Functionality • Supports a RJ-45 10Mbps Ethernet interface • Out of band (RS-232) interface or telnet • Firmware upgrades done only via the RS-232 interface; no remote or in-band capabilities available iMediaChassis/20 — Pricing The only optional extra you pay for with the iMediaCenter/20 is the SNMP management board, all other options (e.g. rack mount brackets, blank faceplates) are included. The street pricing of the iMediaChassis/20 is competitive with that of the 19 slot Point System. Point System — Pricing The street price for the 19-slot Point System seems competitive, however, once options are taken into account the total system pricing becomes high. In addition to the SNMP management module, options you pay for include: blank face plates, rack mount brackets, fan module, etc. iMediaChassis/20 — Warranty IMC Networks warrants to the original end-user purchaser that this product, EXCLUSIVE OF SOFTWARE, shall be free from defects in materials and workmanship under normal and proper use in accordance with IMC Networks' instructions and directions for a period of six (6) years after the original date of purchase. Point System — Warranty Transition offer a limited lifetime warranty on any/all product purchased after May 1st, 1999. The definition of 'limited lifetime' is rather unclear, although the following comment appears in their warranty statement: This warranty covers all electronics and electro-mechanical hardware (i.e. PSU's and fans) "This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services." The comment “normal wear and tear of mechanical components“ seems to offer Transition the ability to reject any warranty claim that they feel. Why is iMediaChassis/20 Better? IMC Networks’ iMediaChassis/20 represents the latest generation of SNMP manageable conversion chassis: More slots and better functionality, combined with simpler configuration and operation. iMediaChassis/20 offers a true 20 slot solution • iMediaChassis/20 has 20 module slots plus an additional slot for an optional management module. The Point System has 19 slots, but if you desire management, one or two of those slots are used, making only 17 or 18 conversions possible. In addition, if the customer wishes to see LEDs indicating whether the PSUs are operational, another slot is taken by the board providing this functionality. 10/100 auto-negotiation ensures optimum compatibility • The SNMP board for the iMediaChassis/20 supports a 10/100 RJ-45 Ethernet interface, a link LED which flashes to indicate TX/RX activity and finally an LED to indicate HDX or FDX operation. • The management board requires no configuration. iMediaChassis/20 offers redundant power and plug-and-play PSUs • iMediaChassis/20 has plug-and-play PSUs; no configuration is necessary. The Point System accommodates two PSUs, however, the installer needs to configure them manually or via SNMP to be either a master or a slave. If the settings are not done correctly damage can occur to the PSUs. Lastly, the installation manual recommends that in temperature ranges of 0° to 60° C both PSUs are set as master and are therefore in load sharing mode. iMediaChassis/20 is engineered for optimum airflow/cooling no matter what PSU options are in use • iMediaChassis/20 is cooled via two 12v fans; these fans are independent of the PSUs, ensuring optimal cooling no matter what PSU options you opt for. In addition, at the front of the chassis 0.5u is used as a air intake, ensuring an optimum and consistent airflow (front to back). Remote, in-band upgrades means no truck rolls required when upgrading the chassis firmware • Perform firmware upgrades in-band i.e. via the Ethernet connection to the SNMP management board. • Use the optional TFTP client to achieve remote firmware upgrades automatically. Firmware validation ensures unit will not be damaged or incorrectly upgraded/downgraded • When upgrading a unit, the SNMP agent within the iMediaChassis validates whether the new firmware version is incompatible or the release date is earlier than the currently installed firmware. Transition’s system has no method or fail-safe whereby you are prevented from installing the wrong or an incompatible version of the firmware. If incompatible firmware is installed, it is highly likely the unit will stop functioning. iMediaChassis/20 represents a substantially lower price per conversion than the Point System • Rackmount brackets and blank faceplates come standard with iMediaChassis/20; they are an additional cost with the Point System. • Whilst there is a small difference with chassis pricing, the real comparison comes when installing conversion modules. Using US street pricing, the cost per populated slot using 100Mbps 40Km single-mode TX/FX conversion modules shows that the iMediaChassis/20 is approximately $280; whereas, the Point System price per populated slot is approximately $700. No hassle six year warranty - product will be covered by warranty • The iMediaChassis/20's six year warranty is easy to understand and straight-forward. The lifetime warranty offered by Transition is at their discretion. Contact us today for more information and pricing! 1-800-624-1070 www.imcnetworks.com Fiber Consulting Services: [email protected] IMC Networks • 19772 Pauling • Foothill Ranch, CA 92610 • TEL: 949-465-3000 • FAX: 949-465-3020 • [email protected] • www.imcnetworks.com IMC Networks • Herseltsesteenweg 268 • B-3200 Aarschot Belgium • TEL: +32-16-550880 • FAX: +32-16-550888 • [email protected] IMC Networks (Eastern US/Latin America) • 18840 US HWY 19 North, #400 • Clearwater, FL 33764 • FAX: 727-524-8432