Transcript
TECHNICAL GUIDE • Diving Products • Rock Products • Rail Products • Games • Water Slides • Pool Lifestyle Tables & Seats
PRODUCT INFORMATION AND SUPPORT 800.737.5386
for the latest information on Inter-Fab products CLICK 8 www.inter-fab.com/techguide
YOUR POOL ACCESSORY RESOURCE
innovation in action
inter-fab.com
TA B L E O F C O N T E N T S
(FULL INDEX IN BACK):
RESIDENTIAL DIVING PRODUCTS Board Construction and Base Compatibility Chart .........................................................................................2 Diving Boards .........................................................................................................................................3-6 Base Categories, Colors and Board Compatibility Chart ................................................................................7 Bases ....................................................................................................................................................8-29
RESIDENTIAL WATER SLIDES Acrylic Slide Overview..............................................................................................................................31 Acrylic Slide Products ..........................................................................................................................32-47 Polyethylene (Rotational Molded) Slides Overview.......................................................................................49 Polyethylene (Rotational Molded) Slide Products.....................................................................................50-61 Landscape Slide Products Overview ...........................................................................................................62 Landscape Slide Products .....................................................................................................................63-72
RAIL GOODS Traditional Style Rails & Ladders Overview ............................................................................................73-74 Traditional Style Ladder & Rail Products ................................................................................................75-92 Designer Series Rails & Ladder Overview ...................................................................................................93 Designer Series Rail & Ladder Products .................................................................................................94-96 Deck Top Mounted Rails Overview........................................................................................................97-98 Deck Top Mounted Rail Products .........................................................................................................99-104
POOL GAMES & LIFESTYLE PRODUCTS Pool Games Overview ............................................................................................................................105 Basketball & Volleyball Sets .....................................................................................................................106 Pool Lifestyle Tables & Seats .............................................................................................................107-114
ECHOES OF NATURE - QUICK REFERENCE Boulder Springs Product List.....................................................................................................................115 Edgestone Series Product List ...................................................................................................................116
REFERENCE INFORMATION Paver Kit Information - Diving Products ....................................................................................................117 Intended Use Instructions - Diving Products ...............................................................................................118 Board Hole Drill Patterns .........................................................................................................................119 Custom Drill Request Form.......................................................................................................................120 Competitor Board Information ..........................................................................................................121-123 Competitor Jig Information ...............................................................................................................124-125 Inter-Fab Diving Envelope Information......................................................................................................126 Inter-Fab Pool Specifications – ANSI/APSP/ICC-5 2011....................................................................127-130 Inter-Fab Slide Water Envelope Information.......................................................................................131-135 Paver Kit Information - Slide Products................................................................................................136-141 Intended Use Instructions - Slide Products .................................................................................................142 Slide Care & Maintenance ...............................................................................................................143-144 BYOS 1 Quote Request Form............................................................................................................145-146 BYOS 2 Quote Request Form............................................................................................................147-148 Garden Ride Series Product Selection Guide.............................................................................................149 Rail Maintenance....................................................................................................................................150 Installation Guide for Rail Goods ......................................................................................................151-152 Custom Handrail Form ............................................................................................................................153 Custom Stair Rail Form............................................................................................................................154 Custom Grab Rail & Ladder Form ............................................................................................................155 Vinyl Liner 1.90” Anchor Installation Guide.......................................................................................156-157 Product Warranty Information..................................................................................................................158 Full Index ................................................................................................................................................i - ii
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
1
DIVING BOARD CONSTRUCTION
(WOOD CORE BOARDS) :
DIVING PRODUCTS
THERE ARE 6 TYPES OF WOOD CORE DIVING BOARD CONSTRUCTION: • Duro-Beam aquaBoard (6’, 8’, 10’) • Duro-Spring (6’, 8’) • Techni-Beam (6’, 8’, 10’, 12’) • Baja (6’, 8’) • Edge aquaBoard (6’, 8’) • Olympian (6’, 8’, 10’) • Commercial (10’, 12’, 14’, 16’) INTER-FAB DIVING BOARD COLOR OPTIONS FOR WOOD CORE BOARDS: DIVING BOARDS:
Standard Colors = Polar White w/White Top Tread OR Linear Blue w/White Top Tread Custom Colors* = Black w/Gray Top Tread: -2; Tan w/Tan Top Tread: -7; Gray w/Gray Top Tread: -9 PLEASE BE SURE TO ADD CUSTOM COLOR CODE BEHIND PART # WHEN ORDERING. * NOTE: The 12’ Techni-Beam and all Commercial Boards (10’, 12’, 14’, & 16’) only available in standard colors.
INTER-FAB BOARD TO BASE COMPATIBILITY CHART ** DURO-BEAM AQUABOARD *** DURO-SPRING
TECHNI-BEAM
BAJA
OLYMPIAN
COMMERCIAL
BASE TYPE
6’
8’
10’
6’
8’
6’
8’
10’
12’
6’
8’
6’
8’
10’
10’
12’
14’
16’
La Mesa 6’ La Mesa 8’ La Mesa 10’ Los Arcos 6’ Los Arcos 8’ Duro-Spring 6’ Duro-Spring 8’ U-Stand 12” U-Stand 18” U-Stand 24” Techni-Spring (Steel) 6’ Techni-Spring (Steel) 8’ Techni-Spring (Fiberglass) 6’ Techni-Spring (Fiberglass) 8’ Baja 6’ Baja 8’ CITY-6
S – – S – – – S S – – – – – – – S
– S – – S – – S S – – – – – – – –
– – S – – – – – S S – – – – – – –
– – – – – S – – – – – – – – – – –
– – – – – – S – – – – – – – – – –
U1 – – U1 – – – U1 U1 – S – S – – – U1
– U1 – – U1 – – U1 U1 – – S – S – – –
– – U1 – – – – – U1 U1 – – – – – – –
– – – – – – – – – U1 – – – – – – –
– – – – – – – – – – – – – – S – –
– – – – – – – – – – – – – – – S –
U2 – – U2 – – – U2 U2 – U1 – U1 – – – U2
– U2 – – U2 – – U2 U2 – – U1 – U1 – – –
– – U2 – – – – – U2 U2 – – – – – – –
– – – – – – – – U3 U3 – – – – – – –
– – – – – – – – – U3 – – – – – – –
– – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – –
INTER-FAB DIVING SYSTEM COMPATIBILITY CHART **** T7 DIVING BOARD ***
EDGE AQUABOARD ***
DIVING SYSTEM
7’
6’
8’
T7 Diving System Edge Diving System
S –
– S
– S
CHART KEY:
S = STANDARD; U1 = UPGRADE 1; U2 = UPGRADE 2; U3 = UPGRADE 3; – = NOT AVAILABLE ** The Board to Base Compatibility Chart above refers to standard wood core diving boards and standard fiberglass and steel diving bases. *** The Duro-Beam aquaBoard™, T7 Diving Board, & Edge aquaBoard™ all come ready to pair with a tip-end waterfall (sold separately). 2 options available: Board Fall (basic waterfall w/o lighting) & Board Fall-L (waterfall w/LED lighting). **** The Diving System Compatibility Chart above refers to Inter-Fab diving systems only. THE T7 & EDGE DIVING SYSTEMS INCLUDE COMPONENTS MANUFACTURED OUT OF ADVANCED COMPOSITE MATERIALS AND ARE DESIGNED TO BE USED EXCLUSIVELY FOR THE T7 & EDGE DIVING SYSTEMS. THEY CANNOT BE INTERCHANGED.
2
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
lighted waterfall shown
Part # DB6 Part # DB8 Part # DB10 Duro-Beam Features: • Dual Beam Laminated Core • Durable Non-Fading, Skid Resistant Acrylic Surface • Fiberglass Reinforced for Superior Strength • Ready for Use with Tip End Board Fall Waterfalls • 7.5–15 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
• Weight Limit = 250 lbs. • See Available Board Colors on Pg. 2 Model #
DIVING PRODUCTS
DURO-BEAM aquaBoard™:
Board Thickness: 1.5” Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
Nominal Length Pool Type
Use with Base Type
Colors
La Mesa/Los Arcos, U-Stands La Mesa/Los Arcos, U-Stands La Mesa, U-Stands
White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray
DB6 DB8 DB10
6’ 8’ 10’
I-V II-V III-V
Model #
Nominal Length
A
B
C
D
F
DIA.
DB6 DB8 DB10
6’ 8’ 10’
70.25” 94.00” 117.50”
17.25” 17.25” 17.25”
12.00” 12.00” 12.00”
4.00” 4.00” 4.00”
30.00” 40.00” 52.00”
19/32” 19/32” 19/32”
TECHNI-BEAM BOARD:
Part # TB6 Part # TB8 Part # TB10 Part # TB12 Techni-Beam Features: • 14” Wide Solid Laminated Core • Durable Non-Fading, Skid Resistant Acrylic Surface • Fiberglass Reinforced for Superior Strength • Weight Limit = 250 lbs. • See Available Board Colors on Pg. 2 Model #
Board Thickness: 1.5”
Nominal Length Pool Type I-V II-V III-V III-V V
Use with Base Type
Colors
La Mesa/Los Arcos, Techni-Spring, U-Stands La Mesa/Los Arcos, U-Stands Techni-Spring La Mesa, U-Stands U-Stands, Stands by other manufacturers
White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray White, Blue
TB6 TB8 TB8 TB10 TB12
6’ 8’ 8’ 10’ 12’
Model #
Nominal Length
A
B
C
D
F
DIA.
TB6 TB8 TB10 TB12
6’ 8’ 10’ 12’
70.25” 94.00” 117.50” 142.00”
17.25” 17.25” 17.25” 17.25”
12.00” 12.00” 12.00” 12.00”
4.00” 4.00” 4.00” 4.00”
30.00” 40.00” 52.00” 62.00”
19/32” 19/32” 19/32” 19/32”
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
3
DURO-SPRING BOARD: DIVING PRODUCTS
Part # DS6 Part # DS8
Duro-Spring Features: • 12” Wide Laminated Wood Core • Durable Non-Fading, Skid Resistant Acrylic Surface • Fiberglass Reinforced for Superior Strength • Weight Limit = 250 lbs. • See Available Board Colors on Pg. 2 Model #
Board Thickness: 1.5”
Nominal Length Pool Type
Use with Base Type
Colors
Duro-Spring Duro-Spring
White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray
DS6 DS8
6’ 8’
I-V III-V
Model #
Nominal Length
A
B
C
D
F
DIA.
DS6 DS8
6’ 8’
70.25” 94.00”
17.25” 17.25”
4.50” 4.50”
8.00” 8.00”
30.00” 36.00”
19/32” 19/32”
OLYMPIAN BOARD:
Part # OLY6 Part # OLY8 Part # OLY10 Olympian Features: • 16.5” Solid Laminated Core • Durable Non-Fading, Skid Resistant Acrylic Surface • Fiberglass Reinforced for Superior Strength • Smooth Resin Finish on Bottom of Board • Weight Limit = 250 lbs. • See Available Board Colors on Pg. 2 Model #
4
6’ Board Thickness: 1.5” 8’ Board Thickness: 1.75” 10’ Board Thickness: 1.75”
Nominal Length Pool Type
Colors
La Mesa/Los Arcos, Techni-Spring, U-Stands La Mesa/Los Arcos, U-Stands Techni-Spring La Mesa, U-Stands
White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray
OLY6 OLY8 OLY8 OLY10
6’ 8’ 8’ 10’
Model #
Nominal Length
A
B
C
D
F
DIA.
OLY6 OLY8 OLY10
6’ 8’ 10’
70.25” 94.00” 117.50”
17.25” 17.25” 17.25”
12.00” 12.00” 12.00”
4.00” 4.00” 4.00”
30.00” 40.00” 52.00”
19/32” 19/32” 19/32”
TG - Rev. 7/15
I-V II-V III-V III-V
Use with Base Type
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
DIVING PRODUCTS
BAJA JUMP BOARD:
Part # BA6 Part # BA8
Baja Jump Board Features: • 14” Wide Laminated Core • Durable Non-Fading, Skid Resistant Acrylic Surface • Fiberglass Reinforced for Superior Strength • Weight Limit = 250 lbs. • See Available Board Colors on Pg. 2 Model #
Board Thickness: 1.5”
Nominal Length Pool Type
Use with Base Type
Colors
Baja Jump Stand Baja Jump Stand
White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray
BA6 BA8
6’ 8’
I-V III-V
Model #
Nominal Length
A
B
C
D
E
F
DIA.
BA6 BA8
6’ 8’
70.25” 94.00”
17.25” 17.25”
12.00” 12.00”
12.00” 12.00”
6.625” 6.625”
15.00” 26.00”
19/32” 19/32”
EDGE DIVING BOARD:
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
Part # EDGE6 Part # EDGE8
lighted waterfall shown
Edge Jump Board Features: • Dual Beam Laminated Core • Durable Non-Fading, Skid Resistant Acrylic Surface • Fiberglass Reinforced for Superior Strength • Ready for Use with Tip End Board Fall Waterfalls • 7.5–15 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
• Weight Limit = 300 lbs. • See Available Board Colors on Pg. 2 Model #
Board Thickness: 1.5”
Nominal Length Pool Type
Use with Base Type
Colors
Edge Base Only Edge Base Only
White, Blue, Black, Tan, Gray White, Blue, Black, Tan, Gray
EDGE 6 EDGE 8
6’ 8’
I-V III-V
Model #
Nominal Length
A
B
C
D
F
DIA.
EDGE 6 EDGE 8
6’ 8’
70.25” 94.00”
17.25” 17.25”
6.31” 6.31”
4.00” 9.00”
42.50” 42.50”
.625” .625”
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
5
T7 DIVING BOARD: DIVING PRODUCTS
Part # T7 DB
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
T7 Board Features: • Advanced Composite Materials • Durable Non-Fading, Skid Resistant Surface • Ready for Use with Tip End Board Fall Waterfalls • 7.5–15 GPM (Actual GPM rating will vary depending
T7 COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60
on specific pool size and pool equipment used.)
• Weight Limit = 300 lbs. • Suitable for Use With Salt Systems • Matching Products: Landscape Slides & Pool Lifestyle Tables • Variety of Earth Tones & Gray Colors Available Model #
lighted waterfall shown
(add custom color code behind board/base part #)
Nominal Length Pool Type
Use with Base Type
Colors
T7 Base Only
See Color Options Above
T7 DB
7’
I-V
Model #
Nominal Length
A
B
C
D
F
DIA.
T7 DB
7’
83.75”
18.75”
8.75”
7.9”
42.35”
19/32”
COMMERCIAL: Part # COM10 Part # COM12 Part # COM14 Part # COM16 Commercial Board Features: • Solid Laminated Core • Durable Non-Fading, Skid Resistant Acrylic Surface • Fiberglass Reinforced for Superior Strength • Smooth Resin Finish on Bottom of Board • Weight Limit = 250 lbs. • See Available Board Colors on Pg. 2 Model #
6
10’ Board Thickness: 1.75” 12’ Board Thickness: 2.25” 14’ Board Thickness: 2.50” 16’ Board Thickness: 2.50”
Nominal Length Pool Type
Colors
U-Stands, Commercial Bases by other manufacturers U-Stands, Commercial Bases by other manufacturers Commercial Bases by other manufacturers Commercial Bases by other manufacturers
White, Blue White, Blue White, Blue White, Blue
COM10 COM12 COM14 COM16
10’ 12’ 14’ 16’
Model #
Nominal Length
A
B
C
D
F
DIA.
COM10 COM12 COM14 COM16
10’ 12’ 14’ 16’
117.50” 142.00” 166.00” 190.00”
17.50” 17.50” 20.00” 20.00”
12.00” 12.00” 12.00” 12.00”
4.00” 4.00” 4.00” 4.00”
52.00” 62.00” 74.00” 86.00”
19/32” 19/32” 19/32” 19/32”
TG - Rev. 7/15
III-V V VII VII-IX
Use with Base Type
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
Active Diving Base Features:
DIVING PRODUCTS
DIVING BASES: DEFINITION NOTE:
• Spring is derived from both the diving base or the diving base springs, and the diving board. • For users who desire more pronounced spring action.
When referring to the INTER-FAB RESIDENTIAL POOL MINIMUM SPECIFICATIONS chart (table 2 on page 126), please note the following:
Active Diving Bases:
• Duro-Spring - economy base for infrequent to moderate use. • Techni-Spring - premium base for moderate to frequent use. • Baja - premium base for moderate to frequent use. • T7 Diving System - premium proprietary board/base set up for moderate to frequent use. • Edge Diving System - premium proprietary board/base set up for moderate to frequent use.
Active Diving Bases = Jump Boards
Passive Diving Base Features:
• Spring is derived from the diving board only. • For pool owners who want a diving board but desire less pronounced spring action.
NOTE: The T7 Diving System is suitable for use on Type I - Type V pools.
Passive Diving Bases:
• U-Stands - economy base for infrequent to moderate use. • City Base - premium base for moderate to frequent use. • La Mesa - premium base for moderate to frequent use. • Los Arcos - premium base for moderate to frequent use.
Passive Diving Bases = Diving Boards
INTER-FAB DIVING BASE COLOR OPTIONS FOR STEEL & ACRYLIC BASES: ACRYLIC DIVING BASES*:
STEEL DIVING BASES:
Standard Color = White Custom Colors = Black: -2; Tan: -7; Gray: -9
Standard Color = White Custom Colors = Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 PLEASE BE SURE TO ADD CUSTOM COLOR CODE BEHIND PART # WHEN ORDERING.
*NOTE: The City-6 Base is manufactured in 6’ white only.
INTER-FAB BOARD TO BASE COMPATIBILITY CHART ** DURO-BEAM AQUABOARD *** DURO-SPRING
TECHNI-BEAM
BAJA
OLYMPIAN
COMMERCIAL
BASE TYPE
6’
8’
10’
6’
8’
6’
8’
10’
12’
6’
8’
6’
8’
10’
10’
12’
14’
16’
La Mesa 6’ La Mesa 8’ La Mesa 10’ Los Arcos 6’ Los Arcos 8’ Duro-Spring 6’ Duro-Spring 8’ U-Stand 12” U-Stand 18” U-Stand 24” Techni-Spring (Steel) 6’ Techni-Spring (Steel) 8’ Techni-Spring (Fiberglass) 6’ Techni-Spring (Fiberglass) 8’ Baja 6’ Baja 8’ CITY-6
S – – S – – – S S – – – – – – – S
– S – – S – – S S – – – – – – – –
– – S – – – – – S S – – – – – – –
– – – – – S – – – – – – – – – – –
– – – – – – S – – – – – – – – – –
U1 – – U1 – – – U1 U1 – S – S – – – U1
– U1 – – U1 – – U1 U1 – – S – S – – –
– – U1 – – – – – U1 U1 – – – – – – –
– – – – – – – – – U1 – – – – – – –
– – – – – – – – – – – – – – S – –
– – – – – – – – – – – – – – – S –
U2 – – U2 – – – U2 U2 – U1 – U1 – – – U2
– U2 – – U2 – – U2 U2 – – U1 – U1 – – –
– – U2 – – – – – U2 U2 – – – – – – –
– – – – – – – – U3 U3 – – – – – – –
– – – – – – – – – U3 – – – – – – –
– – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – –
INTER-FAB DIVING SYSTEM COMPATIBILITY CHART **** T7 DIVING BOARD ***
EDGE AQUABOARD ***
DIVING SYSTEM
7’
6’
8’
T7 Diving System Edge Diving System
S –
– S
– S
CHART KEY:
S = STANDARD; U1 = UPGRADE 1; U2 = UPGRADE 2; U3 = UPGRADE 3; – = NOT AVAILABLE ** The Board to Base Compatibility Chart above refers to standard wood core diving boards and standard fiberglass and steel diving bases. *** The Duro-Beam aquaBoard™, T7 Diving Board, & Edge aquaBoard™ all come ready to pair with a tip-end waterfall (sold separately). 2 options available: Board Fall (basic waterfall w/o lighting) & Board Fall-L (waterfall w/LED lighting). **** The Diving System Compatibility Chart above refers to Inter-Fab diving systems only. THE T7 & EDGE DIVING SYSTEMS INCLUDE COMPONENTS MANUFACTURED OUT OF ADVANCED COMPOSITE MATERIALS AND ARE DESIGNED TO BE USED EXCLUSIVELY FOR THE T7 & EDGE DIVING SYSTEMS. THEY CANNOT BE INTERCHANGED.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
7
LA MESA BASE: DIVING PRODUCTS
F E AT U R E S : • Passive Base - Spring Feature is Derived from Board Only • Durable & Long Lasting Acrylic & Fiberglass Construction • Board Fall Compatible Base • Weight Limit = 250 lbs. • Available in 6’, 8’, or 10’ Set-Ups • 2 Hole Drill Pattern 12” on center • Refer to Board Chart on Pg. 7 • Refer to Available Base Colors on Pg. 7
Part # LAM6 (La Mesa base, 6’ jig & hardware) Part # LAM8 (La Mesa base, 8’ jig & hardware) Part # LAM10 (La Mesa base, 10’ jig & hardware) See page 117 for paver jig info. Compatible with Epoxy Mounting Kit Part # EPX-5
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
8
TG - Rev. 7/15
LA MESA PART #
NOMINAL BOARD LENGTH
ANSI/ POOL TYPE
LAM6 LAM6 LAM6 LAM6 LAM6 LAM8 LAM8 LAM8 LAM8 LAM8 LAM10 LAM10 LAM10 LAM10 LAM10
6’ 6’ 6’ 6’ 6’ 8’ 8’ 8’ 8’ 8’ 10’ 10’ 10’ 10’ 10’
I II III IV V I II III IV V I II III IV V
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
27.5” 27.5” 21.5” 15.5” 9.5”
45.5” 45.5” 45.5” 45.5” 45.5”
18” 18” 24” 30” 36”
20” 20” 26” 30” 40”
18” 24” 30” 36”
20” 26” 30” 40”
24” 30” 36”
26” 30” 40”
NOT ALLOWED
41.25” 35.25” 29.25” 23.25”
59.25” 59.25” 59.25” 59.25” NOT ALLOWED NOT ALLOWED
51.5” 45.5” 39.5”
To view our products online
75.5” 75.5” 75.5” CLICK 8
w w w. i n t e r - f a b . c o m
(LAM6) :
DIVING PRODUCTS
LA MESA BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: LAM6 (shown) LAM8 LAM10
Check your local electrical code requirements for bonding requirements.
DESCRIPTION
DB6WW LAM6 LM-J6 H-1/2 BLK WASH H-1/2 RED WASH H-SS 1/2 LOC WA H-SS 1/2 H NUT H-SS 1/2 F WAS H-1-1/2 WHT CAP H-SS 5 C BOLT H-WHT WAS/CAP LM-FP H-ANTI-SEIZE
6' Duro-Beam White w/White Top Tread & Hdw Kit 6' La Mesa Fiberglass Diving Base 6' La Mesa/Los Arcos Mounting Jig 1/2 x 2" Black Rubber Washer 1/2 x 2" Red Rubber Washer 1/2 Lock Washer S.S. 1/2"- 13 Hex Finish Nut S.S. 1/2 USS Flat Washer S.S. .750 x 1-1/2 White UV Nut Cap 1/2-13 x 5 Carriage Bolt S.S. I.F. White Washer/Cap La Mesa/Los Arcos Rubber Fulcrum Pad Packet of Anti Seize Lubricant (not shown)
LA MESA
COMPONENT
1 2 3 4 5 6 7 8 9 10 11 12 13* * not pictured
LM-BK
ITEM #
DB-TB-M
KITS – QTY. COUNTS
1 1 1 2 2 2 2 2 2 2 2
DB-TB-M: Board to Base Mounting Hardware LM-BK: Base to Jig Mounting Hardware
3 3 3
1 1
NOTES: DB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
9
LOS ARCOS BASE: DIVING PRODUCTS
F E AT U R E S : • Passive Base - Spring Feature is Derived from Board Only • Durable & Long Lasting Acrylic & Fiberglass Construction • Weight Limit = 250 lbs. • Available in 6’ or 8’ Set-Ups • 2 Hole Drill Pattern 12” on center • Refer to Board Chart on Pg. 7 • Refer to Available Base Colors on Pg. 7
Part # LOS6 (Los Arcos base, 6’ jig & hardware) Part # LOS8 (Los Arcos base, 8’ jig & hardware) See page 117 for paver jig info. Compatible with Epoxy Mounting Kit Part # EPX-5
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
10
TG - Rev. 7/15
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
LOS ARCOS PART #
NOMINAL BOARD LENGTH
ANSI/ POOL TYPE
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
LOS6
6’
I
27.5”
45.5”
18”
20”
LOS6
6’
II
27.5”
45.5”
18”
20”
LOS6
6’
III
21.5”
45.5”
24”
26”
LOS6
6’
IV
15.5”
45.5”
30”
30”
LOS6
6’
V
9.5”
45.5”
36”
40”
LOS8
8’
I
LOS8
8’
II
41.25”
59.25”
18”
20”
LOS8
8’
III
35.25”
59.25”
24”
26”
LOS8
8’
IV
29.25”
59.25”
30”
30”
LOS8
8’
V
23.25”
59.25”
36”
40”
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
NOT ALLOWED
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(LOS6) :
DIVING PRODUCTS
LOS ARCOS BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS:
Check your local electrical code requirements for bonding requirements.
LOS6 (shown) LOS8
DESCRIPTION
LOS6 DB6WW LM-J6 H-1/2 BLK WASH H-1/2 RED WASH H-SS 1/2 LOC WA H-SS 1/2 H NUT H-SS 1/2 F WASH H-1-1/2 WHT CAP H-SS 5 C BOLT H-WHT WAS/CAP LM-FP H-ANTI-SEIZE
6' Los Arcos Fiberglass Diving Base 6' Duro-Beam White w/White Top Tread & Hdw Kit 6' La Mesa/Los Arcos Mounting Jig 1/2 x 2" Black Rubber Washer 1/2 x 2" Red Rubber Washer 1/2 Lock Washer S.S. 1/2"- 13 Hex Finish Nut S.S. 1/2 USS Flat Washer S.S. .750 x 1-1/2 White UV Nut Cap 1/2-13 x 5 Carriage Bolt S.S. I.F. White Washer/Cap La Mesa/Los Arcos Rubber Fulcrum Pad Packet of Anti Seize Lubricant (not shown)
LOS ARCOS
COMPONENT
1 2 3 4 5 6 7 8 9 10 11 12 13* * not pictured
LM-BK
ITEM #
DB-TB-M
KITS – QTY. COUNTS
1 1 1 2 2 2 2 2 2 2 2
DB-TB-M: Board to Base Mounting Hardware LM-BK: Base to Jig Mounting Hardware
3 3 3
1 1
NOTES: DB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
11
DURO-SPRING BASE: DIVING PRODUCTS
F E AT U R E S : • Active Base - Spring Feature is Derived from Both Base & Board • Powder Coated Steel Base • Weight Limit = 250 lbs. • Available in 6’ or 8’ Set-Ups • 3 Hole Drill Pattern • Refer to Board Chart on Pg. 7 • Refer to Available Base Colors on Pg. 7
Part # DSS6 (Duro-Spring base, 6’ jig & hardware) Part # DSS8 (Duro-Spring base, 8’ jig & hardware) See page 117 for paver jig info. Compatible with Epoxy Mounting Kit Part # EPX-7
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
12
TG - Rev. 7/15
NOMINAL DURO-SPRING BOARD PART # LENGTH
ANSI/ POOL TYPE
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
DSS6
6’
I
27”
45”
18”
20”
DSS6
6’
II
27”
45”
18”
20”
DSS6
6’
III
21”
45”
24”
26”
DSS6
6’
IV
15”
45”
30”
30”
DSS6
6’
V
9”
45”
36”
40”
DSS8
8’
I
NOT ALLOWED
DSS8
8’
II
NOT ALLOWED
DSS8
8’
III
39.75”
63.75”
24”
26”
DSS8
8’
IV
33.75”
63.75”
30”
30”
DSS8
8’
V
27.75”
63.75”
36”
40”
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(DSS6) :
DIVING PRODUCTS
DURO-SPRING BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: DSS6 (shown) DSS8
DESCRIPTION
DS6WW DS-J DSS6 H-1/2 BLK WASH H-1/2 NYLON WAS H-1/2 RED WASH H-SS 1/2 LOC WA H-SS 1/2 H NUT H-SS 1/2 F WAS H-1-1/2 WHT CAP H-SS 3 C BOLT H-WHT WAS/CAP H-1x1-1/2 W CAP H-5/8 RD WASH H-SS 5/8 F WASH H-SS 5/8 LOC WAS H-SS 5/8 H NUT H-ANTI-SEIZE
6' Duro-Spring White w/ White Top Tread & Hdw Kit Duro-Spring Mounting Jig 6' Duro-Spring Jump Stand 1/2 x 2" Black Rubber Washer 1/2" Flat Washer Nylon 1/2 x 2" Red Rubber Washer 1/2 Lock Washer S.S. 1/2"- 13 Hex Finish Nut S.S. 1/2 USS Flat Washer S.S. .750 x 1-1/2 White UV Nut Cap 1/2-13 x 3" Carriage Bolt S.S. I.F. White Washer/Cap 1" I.D.x 1-1/2" Long White UV 5/8 x 1-3/4" Round Nylon Washer 5/8" USS Flat Washer S.S. 5/8 Split Lock Washer S.S. 5/8-11 Hex Finish Nut S.S. Packet of Anti Seize Lubricant (not shown)
DUROSPRING
COMPONENT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18* * not pictured
DS-BK
ITEM #
DS-M
KITS – QTY. COUNTS
1 1 1
DS-M: Board to Base Mounting Hardware DS-BK: Base to Jig Mounting Hardware
3 3 3 3 3 3 3 3 3 3 3 3 3 3 1
NOTES: DSS6 diving board shown in exploded view for illustration purposes. Must be purchased separately.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
13
U-STANDARDS BASE: DIVING PRODUCTS Part # DBU12049 Part # DBU14049 Part # DBU18049 Part # DBU24049
F E AT U R E S : • Passive Base - Spring Feature is Derived from Board Only • Available in 6 Powder Coated Finishes • Available in 3 Thermo Plastic Coated Finishes • Weight Limit = 250 lbs. • Available in 6’, 8’, 10’, or 12’ Set-Ups • 2 Hole Drill Pattern 12” on center • Refer to Board Chart on Pg. 7
(12” U style) (14” U style; Also available in .065” #DBU14065) (18” U style; Also available in .065” #DBU18065) (24” U style; Also available in .065” #DBU24065)
U-Stand sets 4” into the deck.
IMPORTANT NOTICE: When properly installed, Inter-Fab’s 12”, 14”, and 18” U-Stands will have 4” of the rail embedded within the deck and will measure (respectively) 12”, 14” or 18” from the top of the rail to the surface of the deck. The 24” U-Stand is different, when properly installed 4” of the rail will be embedded within the deck and it will measure 20” from the top of the rail to the surface of the deck.
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER PLACEMENT. 1-800-737-5386
A 6’ 8’ 10’ 12’
14
TG - Rev. 7/15
U-STANDARDS PART # (Note: there are several sizes available for each pool type)
DBU12049 DBU12049 DBU12049 or DBU14049 or DBU18049 DBU12049 or DBU14049 or DBU18049 DBU12049 or DBU14049 or DBU18049 DBU12049 DBU12049 or DBU14049 or DBU18049 DBU12049 or DBU14049 or DBU18049 DBU12049 or DBU14049 or DBU18049
DBU18049 or DBU24049 DBU18049 or DBU24049 DBU18049 or DBU24049
DBU24
NOMINAL BOARD LENGTH
ANSI/ POOL TYPE
6’ 6’ 6’ 6’ 6’ 8’ 8’ 8’ 8’ 8’ 10’ 10’ 10’ 10’ 10’ 12’ 12’ 12’ 12’ 12’
I II III IV V I II III IV V I II III IV V I II III IV V
B 12”, 18” 12”, 18” 18”, 20” 20”
C 30” ±3” 40” ±4” 52” ±5” 62” ±6”
DISTANCE FROM WATER’S EDGE TO FORWARD U-STAND (S)
DISTANCE FROM END OF BOARD TO FORWARD U-STAND
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
18.25” 18.25” 12.25” 6.25”
36.25” 36.25” 36.25” 36.25”
18” 18” 24” 30”
20” 20” 26” 30”
To view our products online
Not recommended. Call customer service for more information. NOT ALLOWED
32” 26” 20” 14”
50” 50” 50” 50”
18” 24” 30” 36”
20” 26” 30” 40”
24” 30” 36”
26” 30” 40”
36”
40”
NOT ALLOWED NOT ALLOWED
37.5” 31.5” 25.5”
61.5” 61.5” 61.5” NOT ALLOWED NOT ALLOWED NOT ALLOWED NOT ALLOWED
40” CLICK 8
76”
w w w. i n t e r - f a b . c o m
(DBU12049) :
DIVING PRODUCTS
U-STANDARDS BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: DBU12049 (shown) DBU14049 DBU14065 DBU18049 DBU18065 DBU24049 DBU24065
Check your local electrical code requirements for bonding requirements.
COMPONENT
DESCRIPTION
1 2 3 4 5 6 7 8 9 10 11 12* * not pictured
DBU12049 DB6WW FC H-WHT WAS/CAP H-SS 5 C BOLT H-1/2 BLK WASH H-1/2 RED WASH H-SS 1/2 F WAS H-SS 1/2 LOC WA H-SS 1/2 H NUT H-1-1/2 WHT CAP H-ANTI-SEIZE
12" U Style Diving Standards 6' Duro-Beam White w/White Top Tread & Hdw Kit Fulcrum Cover For U-Standard Base I.F. White Washer/Cap 1/2-13 x 5 Carriage Bolt S.S. 1/2 x 2" Black Rubber Washer 1/2 x 2" Red Rubber Washer 1/2 USS Flat Washer S.S. 1/2 Lock Washer S.S. 1/2"- 13 Hex Finish Nut S.S. .750 x 1-1/2 White UV Nut Cap Packet of Anti Seize Lubricant (not shown)
U-STAND
ITEM #
DB-TB-M
KITS – QTY. DB-TB-M: Board to Base Mounting Hardware
2 1 1 2 2 2 2 2 2 2 2 1
NOTES: DB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
15
BOULDER SPRINGS DIVING BASE: DIVING PRODUCTS
F E AT U R E S : • Durable, Rugged, & Light Weight Polyurea Construction • Unique Diving Base Adds Beauty and Functionality to Pool Area • Board Fall Compatible Base • Weight Limit = 250 lbs. • Available in 6’, 8’, or 10’ Set-Ups • Can Only Be Used With Inter-Fab U-Stands (included) • 2 Hole Drill Pattern 12” on center • Available in 4 Colors; Hues May Vary • Color is Chemically Bonded to Undercoat
Part # BS-JR Standard Board = Duro-Beam 6’, 8’ or 10’ Upgrade I = Techni-Beam 6’, 8’, or 10’ Upgrade 2 = Olympian 6’, 8’ or 10’
Boulder Springs Rock Colors = Light Granite: -22; Sunset Red: -23; Dark Granite: -28; Rustic Sandstone: -29 (add custom color code behind part # when ordering)
U-Stand sets 4” into the deck.
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED) Custom Diving Board Colors: Black: -2; Tan: -7; Gray: -9 (add custom color code behind part # when ordering)
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
16
TG - Rev. 7/15
A 6’ 8’ 10’
NOMINAL U-STANDARDS BOARD PART # LENGTH (A)
DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049 DBU12049
6’ 6’ 6’ 6’ 6’ 8’ 8’ 8’ 8’ 8’ 10’ 10’ 10’ 10’ 10’
ANSI/ POOL TYPE
I II III IV V I II III IV V I II III IV V
DISTANCE FROM POOL EDGE TO FORWARD U-STAND (S)
B 12” 12” 12”
C 30” ±3” 40” ±4” 52” ±5”
DISTANCE FROM END OF BOARD TO FORWARD U-STAND
18” 18” 12” 9” 9”
MIN. OVERHANG PLUS OR MINUS 3” WA*
36.25” 36.25” 36.25” 36.25” 36.25”
MAX HEIGHT OF BOARD ABOVE WATER HOW
18” 18” 24” 30” 36”
20” 20” 26” 30” 40”
18” 24” 30” 36”
20” 26” 30” 40
24 30 36
26 30 40
NOT ALLOWED
32” 26” 20” 14”
50” 50” 50” 50” NOT ALLOWED NOT ALLOWED
38” 32” 26”
To view our products online
61.5” 61.5” 61.5” CLICK 8
w w w. i n t e r - f a b . c o m
F E AT U R E S : • Durable, Rugged, & Light Weight Polyurea Construction • Emulates the Look of Hand-Laid Stacked Stone • Board Fall Compatible Base • Weight Limit = 250 lbs. • Available for Use With 6’ Length Boards Only • Can Only Be Used With Inter-Fab U-Stands (included) • 2 Hole Drill Pattern 12” on center • Available in 2 Colors; Hues May Vary • Color is Chemically Bonded to Undercoat
Part # 7700 Standard Board = Duro-Beam 6’ Upgrade I = Techni-Beam 6’ Upgrade 2 = Olympian 6’ Custom Diving Board Colors: Black: -2; Tan: -7; Gray: -9 (add custom color code behind part # when ordering)
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
Edgestone Rock Colors = Graystone: -33; Brownstone: -34 (add custom color code behind part # when ordering)
U-Stand sets 4” into the deck.
A 6’
B 12”
C 30”
U-STANDARDS PART #
NOMINAL BOARD LENGTH (A)
ANSI/NSPI-5 POOL TYPE
DBU12049 DBU12049 DBU12049 DBU12049 DBU12049
6’ 6’ 6’ 6’ 6’
I II III IV V
DISTANCE FROM POOL EDGE TO FORWARD U-STAND (S)
DISTANCE FROM END OF BOARD TO FORWARD U-STAND
MIN. OVERHANG PLUS OR MINUS 3” WA*
MAX HEIGHT OF BOARD ABOVE WATER HOW
18” 18” 22”
36.25” 36.25” 36.25”
18” 18” 24”
20” 20” 26”
NOT ALLOWED NOT ALLOWED
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT. 1-800-737-5386
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
17
DIVING PRODUCTS
EDGESTONE DIVING BASE:
TECHNI-SPRING – STEEL BASE: DIVING PRODUCTS
Part # TSB (Techni-Spring Steel Base) Part # TSS6 (6’ Spring Assembly) OR Part # TSS8 (8’ Spring Assembly) See page 117 for paver jig info. Compatible with Epoxy Mounting Kit Part # EPX-5 NOTE: MUST ORDER 3 PARTS FOR A COMPLETE TECHNI-SPRING BASE AND BOARD COMBINATION.
F E AT U R E S : • Active Base - Spring Feature is Derived from Both Base & Board • Powder Coated Steel Base with Leaf Spring • Weight Limit = 250 lbs. • Available in 6’ or 8’ Set-Ups NOTE: MUST BE USED WITH SOLID CORE BOARDS ONLY. • 2 Hole Drill Pattern 12” on center • Refer to Board Chart on Pg. 7 • Refer to Available Base Colors on Pg. 7
6’ Leaf Spring Length: 30” 8’ Leaf Spring Length: 40”
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
18
TG - Rev. 7/15
TECHNISPRING PART # (STEEL)
NOMINAL BOARD LENGTH
ANSI/ POOL TYPE
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
TSB/TSS6
6’
I
31.5”
49.5”
18”
20”
TSB/TSS6
6’
II
31.5”
49.5”
18”
20”
TSB/TSS6
6’
III
25.5”
49.5”
24”
26”
TSB/TSS6
6’
IV
19.5”
49.5”
30”
30”
TSB/TSS6
6’
V
13.5”
49.5”
36”
40”
TSB/TSS8
8’
I
NOT ALLOWED
TSB/TSS8
8’
II
NOT ALLOWED
TSB/TSS8
8’
III
44.25”
68.25”
24”
26”
TSB/TSS8
8’
IV
38.25”
68.25”
30”
30”
TSB/TSS8
8’
V
32.25”
68.25”
36”
40”
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(TSB & TSS6) :
DIVING PRODUCTS
TECHNI-SPRING - STEEL BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS:
Check your local electrical code requirements for bonding requirements.
TSB & TSS6 (shown) TSB & TSS8
22 23 24 25* * not pictured
H-1/2 BLK WASH H-SS 1 SPACER TS-FC H-ANTI-SEIZE
1/2 x 2" Black Rubber Washer 1" Spacer S.S. Techni-Spring Rubber Fulcrum Pad Packet of Anti Seize Lubricant (not shown)
TSS6
Techni-Spring Steel Base 6' Techni-Beam White w/White Top Tread & Hdw Kit Techni-Spring Leaf Spring & Mounting Hardware Techni-Spring Assembly & Mounting Hardware I.F. White Washer Cap Right Base Nylon Plug Left Base Nylon Plug 5/8-11 Hex Finish Nut S.S. 5/8 Split Lock Washer S.S. 5/8" USS Flat Washer S.S. 5/8 x 2" Square Nylon Washer 5/8 x 1-3/4" Round Nylon Washer 1/2-13 x5 Carriage Bolt S.S. 5/8-11 x 2 Hex C/S GR5 S.S. 1" I.D. x 1-1/2" Long White UV .750 x 1-1/2 White UV Nut Cap 1/2 USS Flat Washer S.S. 1/2"- 13 Hex Finish Nut S.S. 1/2 Lock Washer S.S. 1/2 x 2" Red Rubber Washer 1/2" Flat Washer Nylon
TS-M
DESCRIPTION
TS-B TB6WW TS-EDGE-J TSS6 H-WHT WAS/CAP H-RIGHT PLUG H-LEFT PLUG H-SS 5/8 H NUT H-SS 5/8 LOC WA H-SS 5/8 F WASH H-5/8 SQ WASH H-5/8 RD WASH H-SS 5 C BOLT H-SS 5/8 HEX HD H-1x1-1/2 W CAP H-1-1/2 WHT CAP H-SS 1/2 F WASH H-SS 1/2 H NUT H-SS 1/2 LOC WA H-1/2 RED WASH H-1/2 NYLON WAS
TS-BK
COMPONENT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
DB-TB-M
ITEM #
TECHNISPRING STEEL
KITS – QTY. COUNTS
1 1 1 1
DB-TB-M: Board to Base Mounting Hardware TS-BK: Base to Jig Mounting Hardware
2 1 1 2 2 4 2 4
TS-M: Spring to Base Mounting Hardware
2 2 2 2 2 2 2 2
4 4 4 4 4
4
4
2 2 1 1
NOTES:
TB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
19
TECHNI-SPRING – FIBERGLASS BASE: DIVING PRODUCTS
F E AT U R E S : • Active Base - Spring Feature is Derived from Both Base & Board • Durable & Long Lasting Acrylic & Fiberglass Construction with Powder-Coated Leaf Spring • Weight Limit = 250 lbs. • Available in 6’ or 8’ Set-Ups NOTE: MUST BE USED WITH SOLID CORE BOARDS ONLY. • 2 Hole Drill Pattern 12” on center • Refer to Board Chart on Pg. 7 • Refer to Available Base Colors on Pg. 7
Part # TSBF (Techni-Spring Fiberglass Base) Part # TSS6 (6’ Spring Assembly) OR Part # TSS8 (8’ Spring Assembly) See page 117 for paver jig info. EPOXY KIT NOT AVAILABLE. NOTE: MUST ORDER 3 PARTS FOR A COMPLETE TECHNI-SPRING BASE AND BOARD COMBINATION.
6’ Leaf Spring Length: 30” 8’ Leaf Spring Length: 40”
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
20
TG - Rev. 7/15
TECHNINOMINAL SPRING BOARD PART # LENGTH (FIBERGLASS)
ANSI/ POOL TYPE
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
TSBF/TSS6
6'
I
28.25”
46.25”
18”
20”
TSBF/TSS6
6'
II
28.25”
46.25”
18”
20”
TSBF/TSS6
6'
III
22.25”
46.25”
24”
26”
TSBF/TSS6
6'
IV
16.25”
46.25”
30”
30”
TSBF/TSS6
6'
V
10.25”
46.25”
36”
40”
TSBF/TSS8
8'
I
NOT ALLOWED
TSBF/TSS8
8'
II
NOT ALLOWED
TSBF/TSS8
8'
III
41”
65”
24”
26”
TSBF/TSS8
8'
IV
35”
65”
30”
30”
TSBF/TSS8
8'
V
29”
65”
36”
40”
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(TSBF & TSS6) :
DIVING PRODUCTS
TECHNI-SPRING - FIBERGLASS BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: TSBF & TSS6 (shown) TSBF & TSS8
TSS6
TS-M
DESCRIPTION Techni-Spring Fiberglass Base 6' Techni-Beam White w/White Top Tread & Hdw Kit Techni-Spring Fiberglass Base Mounting Jig Techni-Spring Leaf Spring & Mounting Hardware I.F. White Washer Cap Right Base Nylon Plug Left Base Nylon Plug 5/8-11x3" Hex Head Bolt S.S. 5/8-11 Hex Finish Nut S.S. 5/8 Split Lock Washer S.S. 5/8" USS Flat Washer S.S. (cut) 5/8 x 2" Square Nylon Washer 5/8 x 1-3/4" Round Nylon Washer 1/2-13 x5 Carriage Bolt S.S. 5/8-11 x 2 Hex C/S S.S. .750 x 1-1/2 White UV Nut Cap 1/2 USS Flat Washer S.S. 1/2"- 13 Hex Finish Nut S.S. 1/2 Lock Washer S.S. 1/2 x 2" Red Rubber Washer 1/2" Flat Washer Nylon 1/2 x 2" Black Rubber Washer 1" Spacer S.S. Techni-Spring Rubber Fulcrum Pad White UV Nut Cap Packet of Anti Seize Lubricant (not shown)
TSF-M
COMPONENT
1 TSBF 2 TB6WW 3 TSF-J 4 TSS6 5 H-WHT WAS/CAP 6 H-RIGHT PLUG 7 H-LEFT PLUG 8 H-SS 5/8-11x3 9 H-SS 5/8 H NUT 10 H-SS 5/8 LOC WA 11 H-SS 5/8 F WASH 12 H-5/8 SQ WASH 13 H-5/8 RD WASH 14 H-SS 5 C BOLT 15 H-SS 5/8 HEX HD 16 H-1-1/2 WHT CAP 17 H-SS 1/2 F WAS 18 H-SS 1/2 H NUT 19 H-SS 1/2 LOC WA 20 H-1/2 RED WASH 21 H-1/2 NYLON WAS 22 H-1/2 BLK WASH 23 H-SS 1 SPACER 24 TS-FC 25** H-1x1-1/2 W CAP 26** H-ANTI-SEIZE *not required for fiberglass base installation **not pictured
DB-TB-M
ITEM #
TECHNISPRING FIBERGLASS
KITS – QTY. COUNTS
1 1 1 1
DB-TB-M: Board to Base Mounting Hardware TSF-M: Base to Jig Mounting Hardware
2
TS-M: Spring to Base Mounting Hardware
1 1 2 2 2 2
2 2 4 2 4
2 2* 2 2 2 2 2
4 4 4 4 4
4
4
2 2 1 2* 1
NOTES:
Check your local electrical code requirements for bonding requirements.
TB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
21
BAJA JUMP STAND: DIVING PRODUCTS
F E AT U R E S : • Active Base - Spring Feature is Derived from Both Base & Board • Powder Coated Steel Base • Dual Powder Coated Coil Springs • Weight Limit = 250 lbs. • Available in 6’ or 8’ Set-Ups • 4 Hole Drill Pattern • Refer to Board Chart on Pg. 7 • Refer to Available Base Colors on Pg. 7
}
Must order board separately: Part # BA-6C (Complete 6’ kit w/stand & coil spring, jig & hardware) BA6WW or BA8WW Part # BA-8C (Complete 8’ kit w/stand & coil spring, jig & hardware) See page 117 for paver jig info. Compatible with Epoxy Mounting Kit Part # EPX-5 (must order 2 kits)
BOARD LENGTH 6’ 8’
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
22
TG - Rev. 7/15
A 16.75” 27.25”
BAJA PART #
NOMINAL BOARD LENGTH
ANSI/ POOL TYPE
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
BA-6C
6'
I
25”
43”
18”
20”
BA-6C
6'
II
25”
43”
18”
20”
BA-6C
6'
III
19”
43”
24”
26”
BA-6C
6'
IV
13”
43”
30”
30”
BA-6C
6'
V
7”
43”
36”
40”
BA-8C
8'
I
NOT ALLOWED
BA-8C
8'
II
NOT ALLOWED
BA-8C
8'
III
32”
63.75”
24”
26”
BA-8C
8'
IV
26”
63.75”
30”
30”
BA-8C
8'
V
20”
63.75”
36”
40”
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(BA-6C) :
DIVING PRODUCTS
BAJA JUMP STAND
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: BA-6C (shown) BA-8C
Baja Base 6' Baja Jig Baja Dual Coil Spring 1/2 x 2" Black Rubber Washer 1/2" Flat Washer Nylon 1/2 Lock Washer S.S. 1/2"- 13 Hex Finish Nut S.S. 1/2 USS Flat Washer S.S. .750 x 1-1/2 White UV Nut Cap 1/2-13 x 3" Carriage Bolt S.S. I.F. White Washer Cap Packet of Anti Seize Lubricant (not shown)
BA-SM
BA-S
6' Baja Jump Board White w/ White Top Tread & Hdw Kit
BA-M
DESCRIPTION
BA6WW BA-B BA-J6 BA-S H-1/2 BLK WASH H-1/2 NYLON WAS H-SS 1/2 LOC WA H-SS 1/2 H NUT H-SS 1/2 F WAS H-1-1/2 WHT CAP H-SS 3 C BOLT H-WHT WAS/CAP H-ANTI-SEIZE
BA-J6
COMPONENT
1 2 3 4 5 6 7 8 9 10 11 12 13* * not pictured
BA-BK
ITEM #
BA-B
KITS – QTY. COUNTS
BA-M: Board to Base & Spring Mounting Hardware
1 1 1 4 4 4 4 4
NOTES: BA6WW diving board shown in exploded view for illustration purposes. Must be purchased separately.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
4 4 4 4 4 4 4 4 1
BA-BK: Base to Jig Mounting Hardware
2 2 2 2 2
BA-SM: Springs to Base Mounting Hardware
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
23
T7™ DIVING SYSTEM: DIVING PRODUCTS
F E AT U R E S : • Unique 7’ Diving Board Can Be Installed on Type I – Type V Pools • Durable & Long Lasting Acrylic & Fiberglass Construction with Advanced Composite Springs • Advanced Composite Materials • Board Fall Compatible Base • Weight Limit = 300 lbs. • Variety of Earth Tones & Granite Colors Available • Suitable for Use With Salt Systems • Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look.
Part # T7 DB (7’ T7 Diving Board) Part # T7-NBASE (T7 Base & Jig) Part # T7-NSPRING (T7 Springs) See page 117 for paver jig info.
T7 COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60
NOTE: Available as Complete Kits Compatible with Epoxy Mounting Kit Part # EPX-5
(add custom color code behind board/base part #)
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
T7 DIVE STAND ONLY T7 DIVING BOARD CAN BE UTILIZED ON T7 DIVE STAND
MIN. OVERHANG POINT A TO POINT W +/- 3” **
MAX HEIGHT OF BOARD OVER WATER (HOW)
50”
18”
20”
31”
50”
18”
20’
III
25”
50”
24”
26”
7’ T7 ONLY
IV
19”
50”
30”
30”
7’ T7 ONLY
V
13”
50”
36”
40”
DISTANCE FROM DISTANCE FROM WATER’S EDGE TO WATER END OF FORWARD JIG BOLT BOARD TO FORWARD JIG BOLT (S) *
NOMINAL BOARD LENGTH
ANSI/ POOL TYPE
7’ T7 ONLY
I
31”
7’ T7 ONLY
II
7’ T7 ONLY
MUST BE INSTALLED ON TYPE I POOL OR GREATER
IMPORTANT:
THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT. 1 - 8 0 0 - 7 3 7 - 5 3 8 6 24
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(T7 DB, T7-NBASE, T7-NSPRING) :
DIVING PRODUCTS
T7 DIVING SYSTEM
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: T7 DB T7-NSPRING T7-NBASE
NO STEP T7 BASE 7’ T7 DIVING BOARD 3 BOLT T7 NO STEP BASE JIG T7 NBASE SPRINGS (pair) T7 NSPRING PAD OPTIONAL WATERFALL ASSEMBLY 1/2” PVC FLEX SPA HOSE GRAY 1/2” FLAT NYLON WASHER 1/2” SS FLAT WASHER 1/2” SS LOCK WASHER 1/2” SS HEX NUT .750 X 1-1/2 WHITE UV NUT CAP 3/8” SS FLAT WASHER 3/8” SS LOCK WASHER 3/8” SS FINISH HEX NUT .553 X 1/2” GRAY PROTECTIVE CAP 3/8”–16 X 2-1/2” HEX HEAD BOLT SS SS 8 X 3/4” PAN HEAD PHILLIPS SCREW 3/8” NYLON INSERT LOCK NUT PACKET OF ANTI SEIZE LUBRICANT (NOT SHOWN)
T7-NBK: Base to Jig Mounting Hardware T-7
DESCRIPTION
EDGE-SP
COMPONENT
1* T7-NBASE-(color code) 2 T7-DB-(color code) 3 T7-NJIG 4 T7-NSPRING-(color) 5 SPRING PAD (factory installed) 6** BOARD FALL 7** H-1/2 SPA HOSE 8 H-1/2 NYLON WAS 9 H-SS 1/2 F WAS 10 H-SS 1/2 LOC WA 11 H-SS 1/2 H NUT 12 H-1-1/2 WHT CAP 13 H-SS 3/8 FLT WA 14 H-SS 3/8 LOC WA 15 H-SS 3/8 F NUT 16 H-.562 X .390 CAP 17 H-SS 3/8 X 2-1/2 18** H-SS #8 X 3/4 19* H-SS 3/8 NYLON 20* H-ANTI-SEIZE * not pictured ** optional waterfall feature
T7-102-SS
ITEM #
T7-NBK
KITS – QTY. COUNTS
1 1 1 1 2 1 1
T7-102-SS: Board to Springs Mounting Hardware EDGE-SP: Spring to Base Mounting Hardware
3 3 3 3 3 8 8 8 8
12 6
6 4 1
NOTES: Part #T7-NBASE comes WITH jig (#3). The T7 diving board, base, and springs must be used together and cannot be used separately in any other configuration.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
6 1
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
25
EDGE DIVING SYSTEM: DIVING PRODUCTS
F E AT U R E S : • Active Base - Spring Feature is Derived from Both Base & Board • Durable & Long Lasting Acrylic & Fiberglass Construction with Advanced Composite Springs • Board Fall Compatible Base • Weight Limit = 300 lbs. • Available in 6’ or 8’ Set-Ups • Custom 4 Hole Drill Pattern • Can be Used for Retrofit Applications with Existing 12” on Center Techni-Spring Steel Jigs
Part # EDGE-BASE (6’ & 8’ Edge Fiberglass Base & Jig) Part # EDGE-SPRING (6’ & 8’ Spring Assembly) See page 117 for paver jig info. Compatible with Epoxy Mounting Kit Part # EPX-5
• Refer to Available Base Colors on Pg. 7
NOTE: MUST ORDER 3 PARTS FOR A COMPLETE EDGE BASE AND BOARD COMBINATION.
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
1-800-737-5386
26
TG - Rev. 7/15
EDGE DIVING SYSTEM PART #
NOMINAL BOARD LENGTH
ANSI/ POOL TYPE
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
EDGE-BASE
6’
I
31.5”
49.5”
18”
20”
EDGE-BASE
6’
II
31.5”
49.5”
18”
20”
EDGE-BASE
6’
III
25.5”
49.5”
24”
26”
EDGE-BASE
6’
IV
19.5”
49.5”
30”
30”
EDGE-BASE
6’
V
13.5”
49.5”
36”
40”
EDGE-BASE
8’
I
NOT ALLOWED
EDGE-BASE
8’
II
NOT ALLOWED
EDGE-BASE
8’
III
44.25”
68.25”
24”
26”
EDGE-BASE
8’
IV
38.25”
68.25”
30”
30”
EDGE-BASE
8’
V
32.25”
68.25”
36”
40”
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(EDGE6WW, EDGE-BASE, EDGE-SPRING) :
DIVING PRODUCTS
EDGE DIVING SYSTEM
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: EDGE-BASE (shown) EDGE-SPRING (shown) EDGE6WW (shown)
Edge Diving Base Edge Spring Edge Diving Board Edge Jig Edge Spring Pad IFI White Washer Cap 1/2" – 13 X 4" Carriage Bolt S.S. 1/2" Flat Washer S.S. 1/2" Lock Washer S.S. 1/2" Hex Nut S.S. .750 x 1-1/2" White UV Nut Cap 1/2" Flat Nylon Washer 3/8" x 2 1/2" Hex Head Bolt S.S. 3/8" Flat Washer S.S. 3/8" Lock Washer S.S. 3/8" x 3 1/2" Carriage Bolt S.S. 3/8" Finish Hex Nut S.S. .531 x 1.00 White Protective Cap 1/2" x 2" dia. Black Rubber Washer 3/8” Nylon Insert Locknut Packet of Anti Seize Lubricant (not shown)
EDGE
DESCRIPTION
EDGE-BASE EDGE-SPRING EDGE-BOARD TS-EDGE-J Spring Pad (factory installed) H-WHT WAS/CAP H-SS 1/2X13X4C H-SS 1/2 F WASH H-SS 1/2 LOC WA H-SS 1/2 H NUT H-1-1/2 WHT CAP H-1/2 NYLON WAS H-SS 3/8-16X2-1/2 H-SS 3/8 FLT WA H-SS 3/8 LOC WA H-SS 3/8X3-1/2C H-SS 3/8 F NUT H-.531 X 1.00 CAP H-1/2 BLK WASH H-SS 3/8 NYLON H-ANTI-SEIZE
EDGE-M
COMPONENT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21* * not pictured
EDGE-SP
ITEM #
TS-BK
KITS – QTY. COUNTS
1 2 1 1 2 2 2 4 2 2 2
4 4 4 4 4 6 12 6
TS-BK: Base to Jig Mounting Hardware EDGE-SP: Spring to Base Mounting Hardware EDGE-M: Board to Springs Mounting Hardware
2 2 2 2 2 2
6
NOTE: EDGE6WW diving board shown in exploded view for illustration purposes. Must be purchased separately.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
1
Check your local electrical code requirements for bonding requirements. TG - Rev. 7/15
27
CITY BASE: DIVING PRODUCTS
F E AT U R E S : • Passive Base - Spring Feature is Derived from Board Only • Durable & Long Lasting Acrylic & Fiberglass Construction • Board Fall Compatible Base • Weight Limit = 250 lbs. • Available for Use With 6’ Length Boards Only • 2 Hole Drill Pattern 12” on center • Refer to Board Chart on Pg. 7 • Base Available in White Only
Part # CITY-6 (City Base, 6’ jig & hardware) Part # CITY-6-NJ (City Base, hardware & NO jig) See page 117 for paver jig info.
Optional Waterfalls: Board Fall (basic); Board Fall-L (LED)
IMPORTANT: THESE DIMENSIONS ARE ACCURATE ONLY FOR VERTICAL POOL WALLS, TYPICALLY GUNITE CONSTRUCTION, WITH LESS THAN A 3’ RADIUS TO THE POOL FLOOR. DUE TO THE VARYING SIZES OF OTHER POOLS, TYPICALLY VINYL LINER CONSTRUCTION, PLEASE CONTACT CUSTOMER SERVICE FOR PROPER JIG PLACEMENT.
LA MESA PART #
NOMINAL BOARD LENGTH
ANSI/ NSPI-5 POOL TYPE
DISTANCE FROM WATER’S EDGE TO FORWARD JIG BOLT (S)
DISTANCE FROM END OF BOARD TO FORWARD JIG BOLT
MIN. OVERHANG PLUS OR MINUS 3” (WA)
MAX HEIGHT OF BOARD ABOVE WATER (HOW)
CITY-6
6’
I
23.125”
41.125”
18”
20”
CITY-6
6’
II
23.125”
41.125”
18”
20”
CITY-6
6’
III
17.125”
41.125”
24”
26”
CITY-6
6’
IV
11.125”
41.125”
30”
30”
CITY-6
6’
V
5.125”
41.125”
36”
40”
NOTE: The City Base can be purchased as a retrofit or replacement base (without jig) OR with a jig for a new installation. The City Base is manufactured in WHITE ONLY.
1-800-737-5386
28
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(CITY-6) :
DIVING PRODUCTS
CITY BASE
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: CITY-6 (shown)
DESCRIPTION
CITY - 6 BASE DB6WW CITY6-JIG H-1/2 BLK WASH H-1/2 RED WASH H-SS 1/2 LOC WA H-SS 1/2 H NUT H-SS 1/2 F WASH H-SS 5/8 F WASH H-1-1/2 WHT CAP H-SS 5 C BOLT H-WHT WAS/CAP LM-FP H-ANTI-SEIZE
6' City Base Fiberglass Diving Base 6' Duro-Beam White w/White Top Tread & Hdw Kit 6' City Base Mounting Jig 1/2 X 2" Black Rubber Washer 1/2 X 2" Red Rubber Washer 1/2" Lock Washer S.S. 1/2"- 13 Hex Finish Nut S.S. 1/2 Flat Washer S.S. 5/8 Flat Washer S.S. .750 X 1-1/2 White UV Nut Cap 1/2-13 X 5 Carriage Bolt S.S. I.F. White Washer/Cap Rubber Fulcrum Pad Packet of Anti Seize Lubricant (not shown)
CITY
COMPONENT
1 2 3 4 5 6 7 8 9 10 11 12 13 14* * not pictured
CB-M
ITEM #
DB---TBM
KITS – QTY. COUNTS
1 1 1 2 2 2 2 2
DB-TB-M: Board to Base Mounting Hardware CB-M: Base to Jig Mounting Hardware
3 3 3 3
2 2 2 1 1
NOTES: DB6WW diving board shown in exploded view for illustration purposes. Must be purchased separately. Other diving board options available.
Check your local electrical code requirements for bonding requirements.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
29
Wild Ride™ Slide
RESIDENTIAL SLIDES
Male Model Stands at 5’11”
Zoomerang™ Slide
30
TG - Rev. 7/15
White Water™ Slide
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
RESIDENTIAL SLIDES – ACRYLIC: Blue
Tan
Gray
X X X
X X X
X X X
Zoomerang™ Slide 3’ high at seating area (Available in RIGHT turn only.)
Part # ZM-CR-SS comes w/ss hardware
F E AT U R E S : • Slides Shown On This Page Are Constructed of Durable & Long Lasting Acrylic With Fiberglass Reinforcements • All Inter-Fab Slides Feature the Utmost in Safety & Performance • Exclusive Zoom-Flume™ Water Delivery System • Super Safe Enclosed Steps on White Water and Wild Ride Slides • Water Park Style U-Shaped Flumes* • All Ship With Stainless Steel Hardware • Stainless Steel or U.V. Resistant Plastic Components - NO Aluminum Parts*
RESIDENTIAL SLIDES
COLORS (acrylic) White Zoomerang X X White Water Wild Ride X City 2 Slide X
* Except the City 2 Slide Check your local electrical code requirements for bonding requirements.
White Water™ Slide
Edgestone Slide Rock™
4’ high at seating area
4’ high at seating area (Available in RIGHT turn only.)
Part # WWS-CL-SS Part # WWS-CR-SS Part # WWS-CLB-SS Part # WWS-CRB-SS Part # WWS-CLT-SS Part # WWS-CRT-SS Part # WWS-CLG-SS Part # WWS-CRG-SS comes w/ss hardware
Part # 7920 (tan) Part # 7930 (gray) comes w/ss hardware add rock panel color: -33 Graystone* -34 Brownstone *paired w/gray slide only
Wild Ride™ Slide
City 2™ Slide
6’6” high at seating area
6’ high at seating area
Part # WRS-CL-SS Part # WRS-CR-SS Part # WRS-CLB-SS Part # WRS-CRB-SS Part # WRS-CLT-SS Part # WRS-CRT-SS Part # WRS-CLG-SS Part # WRS-CRG-SS comes w/ss hardware
Part # CITY2-CLW Part # CITY2-CLB Part # CITY2-CLT Part # CITY2-CLG Part # CITY2-CRW Part # CITY2-CRB Part # CITY2-CRT Part # CITY2-CRG comes w/ss hardware *Aluminum Ladder, Legs, and Handrails
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
31
WILD RIDE™ SLIDE: Zoom-flume™ Water Supply System 91.5”
F E AT U R E S : • Durable & Long Lasting Acrylic With Fiberglass Reinforcements • Available in White, Tan, Gray & Blue • Available in Right or Left Turn • 77.5” High at Seating Area • Flume Width = 21.5” (centerline) • Flume Depth = 10.5” • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
RESIDENTIAL SLIDES
• Stainless Steel Rails, Legs & Hardware • Exclusive Stainless Steel Deck Flanges • Optional Powder Coated or Thermo Plastic Coated Rails & Legs • Fully Molded Steps Provide Safe Access to Slide Flume • Weight Limit = 250 Lbs.
77.5” seating
WILD RIDE™ - RIGHT Stainless Steel Rails & Legs
Standard Stainless Steel Deck Flanges
Deep Flume provides sliding comfort for all ages
DESCRIPTION Wild Wild Wild Wild
Ride Ride Ride Ride
Slide Slide Slide Slide
PART NUMBER -
right right right right
-
white blue tan gray
Part Part Part Part
#WRS-CR-SS #WRS-CRB-SS #WRS-CRT-SS #WRS-CRG-SS
comes w/ss hardware
Wild Ride™ Footprint for RIGHT Turn Slide
32
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
WILD RIDE™ SLIDE: Zoom-flume™ Water Supply System 91.5”
F E AT U R E S : • Durable & Long Lasting Acrylic With Fiberglass Reinforcements • Available in White, Tan, Gray & Blue • Available in Right or Left Turn • 77.5” High at Seating Area • Flume Width = 21.5” (centerline) • Flume Depth = 10.5” • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
RESIDENTIAL SLIDES
77.5” seating
• Stainless Steel Rails, Legs & Hardware • Exclusive Stainless Steel Deck Flanges • Optional Powder Coated or Thermo Plastic Coated Rails & Legs • Fully Molded Steps Provide Safe Access to Slide Flume • Weight Limit = 250 Lbs.
WILD RIDE™ - LEFT Stainless Steel Rails & Legs
Standard Stainless Steel Deck Flanges
Deep Flume provides sliding comfort for all ages
DESCRIPTION Wild Wild Wild Wild
Ride Ride Ride Ride
Slide Slide Slide Slide
PART NUMBER -
left left left left
-
white blue tan gray
Part Part Part Part
#WRS-CL-SS #WRS-CLB-SS #WRS-CLT-SS #WRS-CLG-SS
comes w/ss hardware
Wild Ride™ Footprint for LEFT Turn Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
33
WILD RIDE™ SLIDE
(WRS-CR-SS) :
RESIDENTIAL SLIDES 34
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
WILD RIDE™ SLIDE
(WRS-CR-SS) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE.
SH-101: Handrails; Step to Step SH-102: Flume to Flume; Leg to Flume SH-103: Step to Deck SH-104: Protective Caps SH-106: Deck Anchors to Legs; Deck Anchor to Deck SH-107: Deck Anchor SH-108: Step to Flume
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: WRS-CL-SS
WRS-CR-SS (shown)
1 WRS-URUN-W-R WILD RIDE UPPER RUNWAY 2 WRS-LRUN-W-R WILD RIDE LOWER RUNWAY 3 WRS-LSTEP-W WILD RIDE STEP LOWER SECTION 4 WRS-USTEP-W WILD RIDE STEP UPPER SECTION 5 WRS-HD RAIL WILD RIDE HANDRAIL 6 WW-24-1/2”-LEG LEG, 24-1/2" 7 WW-22”-LEG LEG, 22" 8 WW-54-1/2”-LEG LEG, 54-1/2" 9 H-WRS/WW GASKET GASKET, CLOSED CELL NEOPRENE SPONGE 10 DECK ANCHOR 9" STAINLESS STEEL DECK ANCHOR 11 H-.463 X .310 CAP .463 X .310 PROTECTIVE CAP 25 12 H-.562 X .390 CAP .562 X .390 PROTECTIVE CAP 16 13 H-1 BALL VALVE 1" BALL VALVE-SLIP WHITE 14 H-1 SPA HOSE 10 FEET OF 1" PVC FLEX PIPE 15 H-1 WHT CAP .750 X 1" GRAY NUT CAP 6 16 H-SS 1/2 F WAS 1/2” FLAT WASHER S.S. 8 17 H-SS 1/2-13 BOL 1/2” X 1-1/2” HEX HEAD BOLT S.S. 8 18 H-SS 1/4 FL HEAD 1/4-20 X 3/4" SOC FLAT C/S SS 19 H-SS 1/4 FLAT W 1/4" FLAT WASHER SS 18.8 17 8 20 H-SS 1/4 H NUT 1/4" HEX NUT SS 11 4 21 H-SS 1/4 X 1-1/4 F 1/4-20 X 1-1/4" SOC FLAT C/S 1 22 H-SS 1/4-20 X 1 1/4” X 1” HEX HEAD BOLT S.S. 6 23 H-SS 1/4X2-1/4H 1/4” X 2-1/4” HEX HEAD BOLT S.S. 4 24 H-SS 3/8 F NUT 3/8" HEX NUT SS 6 2 25 H-SS 3/8 FLT WASHER 3/8” X 1” FLAT WASHER S.S. 12 4 26 H-SS 3/8 WEDGE 3/8 X 2-3/4 WEDGE ANCHOR ST.ST 2 27 H-SS 3/8X1 H B 3/8” X 1” HEX HEAD BOLT S.S. 2 28 H-SS 3/8X1-3/4 3/8” X 1-3/4” HEX HEAD BOLT S.S. 6 29 L-BRACKET L-BRACKET, LADDER ANCHOR, WHITE * not pictured ** Comes with one (1) deck anchor and one (1) SH-106 kit. Must order one for each leg of the slide (4 total). 4 are included when ordering a complete slide.
WRS
HOSE
SH-108
SH-107
SH-106
SH-104
DESCRIPTION
SH-103
COMPONENT
SH-102
ITEM #
SH-101
HARDWARE KITS/PARTS KITS – QTY. COUNTS
1 1 1 1 2 1 1 2 1 1** 1 3 1* 1*
2 2 1 3 1 3 3 3
2
NOTES: Wild Ride Slides available in both right and left turns. Wild Ride slides available with optional custom powder coated or thermo plastic coated handrails and legs.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
35
RESIDENTIAL SLIDES
<---
WHITE WATER™ SLIDE: Zoom-flume™ Water Supply System 62”
F E AT U R E S : • Durable & Long Lasting Acrylic With Fiberglass Reinforcements • Available in White, Tan, Gray & Blue • Available in Right or Left Turn • 48.5” High at Seating Area • Flume Width = 22” (centerline) • Flume Depth = 9.5” • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
RESIDENTIAL SLIDES
48.5” seating
Stainless Steel Rails & Legs
• Stainless Steel Rails, Legs & Hardware • Exclusive Stainless Steel Deck Flanges • Optional Powder Coated or Thermo Plastic Coated Rails & Legs • Discreetly Sits Below a 6’ Privacy Fence • Fully Molded Steps Provide Safe Access to Slide Flume • Weight Limit = 250 Lbs.
WHITE WATER™ - RIGHT DESCRIPTION
Deep Flume provides sliding comfort for all ages
Standard Stainless Steel Deck Flanges
White White White White
Water Water Water Water
PART NUMBER Slide Slide Slide Slide
-
right right right right
-
white blue tan gray
Part Part Part Part
#WWS-CR-SS #WWS-CRB-SS #WWS-CRT-SS #WWS-CRG-SS
comes w/ss hardware
White Water™ Footprint for RIGHT Turn Slide
36
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
WHITE WATER™ SLIDE:
62”
48.5” seating
Stainless Steel Rails & Legs Deep Flume provides sliding comfort for all ages Standard Stainless Steel Deck Flanges
on specific pool size and pool equipment used.)
• Stainless Steel Rails, Legs & Hardware • Exclusive Stainless Steel Deck Flanges • Optional Powder Coated or Thermo Plastic Coated Rails & Legs • Discreetly Sits Below a 6’ Privacy Fence • Fully Molded Steps Provide Safe Access to Slide Flume • Weight Limit = 250 Lbs.
RESIDENTIAL SLIDES
Zoom-flume™ Water Supply System
F E AT U R E S : • Durable & Long Lasting Acrylic With Fiberglass Reinforcements • Available in White, Tan, Gray & Blue • Available in Right or Left Turn • 48.5” High at Seating Area • Flume Width = 22” (centerline) • Flume Depth = 9.5” • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending
WHITE WATER™ - LEFT DESCRIPTION White White White White
Water Water Water Water
PART NUMBER Slide Slide Slide Slide
-
left left left left
-
white blue tan gray
Part Part Part Part
#WWS-CL-SS #WWS-CLB-SS #WWS-CLT-SS #WWS-CLG-SS
comes w/ss hardware
White Water™ Footprint for LEFT Turn Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
37
WHITE WATER™ SLIDE
(WWS-CR-SS) :
RESIDENTIAL SLIDES 38
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
WHITE WATER™ SLIDE
(WWS-CR-SS) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE.
SH-102: Flume to Flume; Leg to Flume SH-103: Step to Deck SH-104: Protective Caps SH-106: Deck Anchors to Legs; Deck Anchor to Deck SH-107: Deck Anchor SH-108: Step to Flume
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: WWS-CL-SS
WWS-CR-SS (shown)
HOSE
1 H-.463 X .310 CAP .463 X .310 PROTECTIVE CAP 25 1 2 H-.562 X .390 CAP .562 X .390 PROTECTIVE CAP 15 3 3 H-1 WHT CAP .750 X 1" GRAY NUT CAP 6 4 H-SS 1/2 F WAS 1/2” FLAT WASHER S.S. 6 5 H-SS 1/2-13 BOL 1/2” X 1-1/2” HEX HEAD BOLT S.S. 6 6 H-SS 1/4 H NUT 1/4” FINISH HEX NUT S.S. 4 5 1 7 H-SS 1/4 FLAT W 1/4” FLAT WASHER S.S. 8 5 1 8 H-SS 1/4X2-1/4H 1/4” X 2-1/4” HEX HEAD BOLT S.S. 4 1 9 H-SS 1/4 X 1-1/4 F 1/4-20 X 1-1/4" SOC FLAT C/S 1 3 10 H-SS 1/4 FL HEAD 1/4-20 X 3/4" SOC FLAT C/S SS 2 11 H-SS 3/8 F NUT 3/8” FINISH HEX NUT S.S. 6 2 3 12 H-SS 3/8 FLT WASHER 3/8” X 1” FLAT WASHER S.S. 12 4 3 13 H-SS 3/8X1 H B 3/8” X 1” HEX HEAD BOLT S.S. 2 14 H-SS 3/8X1-3/4 3/8” X 1-3/4” HEX HEAD BOLT S.S. 6 15 H-SS 3/8 WEDGE 3/8” X 2-3/4” WEDGE ANCHOR, NUT & FLAT W S.S. 2 3 16 H-1 BALL VALVE BALL VALVE, 1" SLIP WHITE 17 DECK ANCHOR DECK ANCHOR, 9" STAINLESS STEEL 1** 18 H-WRS/WW GASKET GASKET, CLOSED CELL NEOPRENE SPONGE 19 L-BRACKET L-BRACKET, LADDER ANCHOR, WHITE 2 NOT SHOWN (For WWS-CL-SS Only) 20 13" LEG LEG 13" 21 16-3/4" LEG LEG 16-3/4" 22 32-5/8" LEG LEG 32-5/8" 23 H-1 SPA HOSE PVC FLEX PIPE, 1" X 10' 24 WWS-HR WHITEWATER HANDRAIL 25 WWS-LRUN-W-R WHITEWATER LOWER RUNWAY 26 WWS-STEP-W WHITEWATER STEP WHITE 27 WWS-URUN-W-R WHITEWATER UPPER RUNWAY 28 H-ANTI-SEIZE ANTI-SEIZE PACKET (NOT SHOWN) * not pictured ** Comes with one (1) deck anchor and one (1) SH-106 kit. Must order one for each leg of the slide (4 total). 4 are included when ordering a complete slide. ** Comes with one (1) deck anchor and (1) SH-106 kit. Must order one for each leg of slide (4) total.
1*
ITEM #
COMPONENT
DESCRIPTION
WWS
SH-108
SH-107
SH-106
SH-105
SH-104
SH-103
SH-102
HARDWARE KITS/PARTS KITS – QTY. COUNTS
1
2 2 1* 2 1 1 1 1*
NOTES: White Water slides available in both right and left turns. White Water slides available with optional custom powder coated or thermo plastic coated handrails and legs.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
39
RESIDENTIAL SLIDES
<---
EDGESTONE SLIDE ROCK™: Powder Coated Handrails
Zoom-flume™ Water Supply System
62”
RESIDENTIAL SLIDES
48.5” seating
F E AT U R E S : • Durable, Rugged, & Light Weight Polyurea Construction (Rock Panels) • Slide Available in Tan & Gray • Available in Right Turn Only • 48.5” High at Seating Area • Flume Width = 22” (centerline) • Flume Depth = 9.5” • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
Front Rock Panel Standard Stainless Steel Legs and Deck Flanges
Deep Flume provides sliding comfort for all ages
• Stainless Steel Legs & Hardware • Standard Powder Coated Handrails with Tan or Gray Slide Rock Slide • Discreetly Sits Below a 6’ Privacy Fence • Simulated Rock Accents (Front & Rear Rock Accents Available Separately) • Fully Molded Steps Provide Safe Access to Slide Flume • Weight Limit = 250 Lbs.
ES SLIDE ROCK™
Edgestone Rock Colors = Graystone: -33; Brownstone: -34 (add custom color code behind part # when ordering) Powder Coated Rail Colors = Tan slide comes with Earth: -3; Gray slide comes with Hammertone Gray: -6;
DESCRIPTION
PART NUMBER
ES Slide Rock - right - tan ES Slide Rock - right - gray comes w/ss hardware
Part #7920 Part #7930
Edgestone Slide Rock™
Edgestone Slide Rock™ shown with Edgestone Scupper™
Edgestone Slide Rock™ Footprint for RIGHT Turn Only Slide 40
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
ZOOMERANG™ SLIDE: Stainless Steel Rails & Legs
Zoom-flume™ Water Supply System
48”
F E AT U R E S : • Durable & Long Lasting Acrylic Construction • Available in White Only • Available in Right Turn Only • 37” High at Seating Area • Flume Width = 19” (centerline) • Flume Depth = 9.5” • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
Stainless Steel Rails, Legs & Hardware Discreetly Sits Below a 6’ Privacy Fence Minimum Water Depth of 3’6” Water Supply Attaches Directly to Pool Return Inlet • Weight Limit = 200 Lbs.
37” seating
RESIDENTIAL SLIDES
• • • •
ZOOMERANG™ SLIDE Deep Flume provides sliding comfort for all ages
DESCRIPTION
PART NUMBER
Zoomerang Slide - right - white
Part #ZM-CR-SS
comes w/ss hardware
Zoomerang™ Footprint for RIGHT Turn Only Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
41
ZOOMERANG™ SLIDE
(ZM-CR-SS) :
RESIDENTIAL SLIDES 42
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
ZOOMERANG™ SLIDE
(ZM-CR-SS) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE. RESIDENTIAL SLIDES
<---
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS:
ZM-H1-SS: Ladder Assembly; Flume to Ladder; Ladder to Deck ZM-H2-SS: Base to Flume; Base to Deck
ZM-CR-SS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 * not pictured
ZOOMERANG RUNWAY FLUME SUPPORT BASE ZOOMERANG LADDER ZOOMERANG LADDER TREADS ZOOMERANG HANDRAILS LADDER ESCUTCHEONS GRAY PROTECTIVE CAP GRAY PROTECTIVE CAP .500 OD X.257 ID NYLON BUSHING 1/4” FLAT WASHER S.S. 1/4” X 1-1/4” HEX HEAD BOLT S.S. 1/4” FINISH HEX NUT S.S. 3/8” X 1” FLAT WASHER S.S. 3/8” FINISH NUT S.S. 3/8” X 2-3/4” WEDGE ANCHOR W/NUT & WASHER S.S.
3/8” X 3” HEX HEAD TAP BOLT S.S. 5/16 X 2 3/4” LADDER BOLT S.S. 5/16” SAE FLAT WASHER S.S. 5/16”HEX FINISH NUT S.S. 1-5/8” X 1/2” WHITE VINYL CAP ZOOMERANG RETURN ADAPTER
ZOOM
DESCRIPTION
ZM-R ZM-B ZM-Ladder ZM-T ZM-HR LADDER ESCUTCHEONS H-.463 X .310 CAP H-.562 X .390 CAP H-NYLON BUSHING H-SS 1/4 FLAT W H-SS 1/4 H C/S H-SS 1/4 H NUT H-SS 3/8 FLT WASHER H-SS 3/8 F NUT H-SS 3/8 WEDGE H-SS 3/8 X 3 TAP H-SS 5/16 BOLT H-SS 5/16 F WAS H-SS 5/16 H NUT H-VINYL NUT CAP ZM-RA
ZM
COMPONENT
ZM-H2-SS
ITEM #
ZM-H1-SS
KITS – QTY. COUNTS
1 1 2 3 2 2 3 3 3 6 3 3 4 4 4 6 6 6 2
1 3
1*
NOTES: Zoomerang available in white only. Zoomerang available in right turn only.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
43
CITY 2™ SLIDE:
Zoom Flume™ Water Supply System
90”
F E AT U R E S : • Durable & Long Lasting Acrylic Construction • Available in White, Blue, Tan & Gray • Available in Right or Left Turn • 72” High at Seating Area • Flume Width = 17” (centerline) • Flume Depth = 5” • Extruded Aluminum Ladder, Handrails & Legs • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending
RESIDENTIAL SLIDES
on specific pool size and pool equipment used.)
• Optional Deck Mounting Flanges Available (must order separately)* • Weight Limit = 225 Lbs. • 1 Year Warranty
72” seating
CITY 2™ SLIDE - RIGHT DESCRIPTION City City City City
2 2 2 2
Slide Slide Slide Slide
-
PART NUMBER right right right right
-
white blue tan gray
Part Part Part Part
#CITY2-CRW #CITY2-CRB #CITY2-CRT #CITY2-CRG
comes w/ss hardware *optional deck mounting flanges CITY-DECK ANCH (1 each)
Optional Deck Mounting Flanges (Sold Separately)
City 2™ Slide Footprint for RIGHT Turn Slide
44
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
CITY 2™ SLIDE:
Zoom Flume™ Water Supply System
90”
F E AT U R E S : • Durable & Long Lasting Acrylic Construction • Available in White, Blue, Tan & Gray • Available in Right or Left Turn • 72” High at Seating Area • Flume Width = 17” (centerline) • Flume Depth = 5” • Extruded Aluminum Ladder, Handrails & Legs • Zoom-Flume™ Water Supply System • 15-30 GPM (Actual GPM rating will vary depending
72” seating
RESIDENTIAL SLIDES
on specific pool size and pool equipment used.)
• Optional Deck Mounting Flanges Available (must order separately)* • Weight Limit = 225 Lbs. • 1 Year Warranty
CITY 2™ SLIDE - LEFT DESCRIPTION City City City City
Optional Deck Mounting Flanges (Sold Separately)
Slide Slide Slide Slide
-
left left left left
PART NUMBER -
white blue tan gray
Part Part Part Part
#CITY2-CLW #CITY2-CLB #CITY2-CLT #CITY2-CLG
comes w/ss hardware *optional deck mounting flanges CITY-DECK ANCH (1 each)
City 2™ Slide Footprint for LEFT Turn Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
45
CITY 2™ SLIDE
(CITY2-CLW) :
RESIDENTIAL SLIDES 46
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
CITY 2™ SLIDE
(CITY2-CLW) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE.
<--DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: CITY2-CL (shown) CITY2-CR
RESIDENTIAL SLIDES
CS-101-SS: Handrails; Ladder to Deck; Leg to Flume CS-102-SS: Flume to Flume
* City Slide Deck Anchors are Sold Separately (4 required for a complete City Slide install)
3 H-C2 L GASKET or H-C2 R GASKET Gasket (either right turn or left turn gasket) 4 CITY-LADDER Aluminum Ladder Assembly 5 CITY HANDRAIL Aluminum Slide Handrails 6 H-45.500 LEG 45.50” Aluminum Slide Leg 7A H-23.250 LEG 23.25” Aluminum Slide Leg 7B H-20.500 LEG 20.50” Aluminum Slide Leg 8 CITY-DECK ANCH Deck Anchor (optional item; ordered separately) 9 5/16” Concrete Insert Lag Shield 10 5/16” x 2-1/2” Hex Lag Screw S.S. 11 1/4” x 3” Hex Bolt S.S. 12 1/4” Flat Washer S.S. 13 1/4” x 3/8” Aluminum Bushing 14 1/4” Lock Washer S.S. 15 1/4” Finish Nut S.S. 16 1/4” x 2-1/4” Wedge Anchor S.S. w/Washer 17 1/4” x 2-1/4” Tap Bolt S.S. 18 1/4” x 12” Carriage Bolt 19 7-1/2” Aluminum Spacer 20 Round to Flat Nylon Connector 21 Round to Flat Nylon Connector w/Wedge 22 1/4” x 1-1/4” Machine Bolt S.S. 23 5-1/2” Aluminum Spacer 24 1/4” x 7-1/2” Carriage Bolt S.S. 25 Round to Round Nylon Connector 26 H-.562 X .390 CAP Gray Protective Cap 27 H-SS 3/8 X 1-3/4 3/8” x 1-3/4” Hex Head Bolt S.S. 28 H-SS 3/8 FLT WASHER 3/8” x 1” Flat Washer S.S. 29 H-SS 3/8 LOC WASHER 3/8” Lock Washer S.S. 30 H-SS 3/8 F NUT 3/8” Finish Nut S.S. 31 #14 x 3/4” S.S. Pan Head Screw 32 H-1/2 SPA HOSE 1/2” Spa Hose - 10 ft 33 H-1/2 BALL VALVE 1/2” On/Off Ball Valve * OPTIONAL - Deck Anchors are Sold Separately. Must order 1 for each slide leg for a total of 4. ** not pictured
CITY 2
City 2 Upper Runway City 2 Lower Runway
CITY-DECK ANCH (4)
DESCRIPTION
CITY2-URUN CITY2-LRUN
CITY2-PRTS PACK
COMPONENT
1 2
CS-102-SS
ITEM #
CS-101-SS
KITS – QTY. COUNTS
1 1 1 1 2 2 1 1 1* 4* 4* 1* 4* 1*
8 8 8 4 2 2 2 4 4 2 2 2 4
1* .
12 6 12 6 6 8 1** 1**
NOTES: City 2 Slides available in white, blue, tan and gray. City 2 Slides available in both right and left turns.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
47
Adrenaline™ Slide
Male Model Stands at 5’11”
RESIDENTIAL SLIDES G-Force 2™ Slide
48
TG - Rev. 7/15
X-Stream 2™ Slide
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
F E AT U R E S : • Slides Shown On This Page Are Constructed of Rotational Molded - Polyethylene on Flumes, Steps, Rails & Leg Supports (PVC Legs) • All Inter-Fab Slides Feature the Utmost in Safety & Performance • Exclusive Zoom-Flume™ Water Delivery Systems • StableSafe™ Climbing System • Super Safe Slip Resistant Treads • Water Park Style U-Shaped Flumes • All Ship With Stainless Steel Hardware • Stainless Steel or U.V. Resistant Plastic Components - NO Aluminum Parts
Part # XS-GR-SS Part # XS-TA-SS comes w/ss hardware
X-Stream 2™ Slide 6’ high at seating area
COLORS X-Stream 2 G-Force 2 Adrenaline
Summit Gray X X X
Desert Tan X X X
StableSafe™ Climbing System:
STABILITY BASE Part # G4C-G Part # G4C-T comes w/ss hardware
G-Force 2™ Slide
SAFETY TREAD W/TOE STOP
6’ high at seating area Part # ADR1-CR-G Part # ADR1-CL-G Part # ADR1-CR-T Part # ADR1-CL-T comes w/ss hardware
Adrenaline™ Slide 7’ high at seating area Check your local electrical code requirements for bonding requirements.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
GRIP-AROUND HANDRAIL AT CORRECT WIDTH
TG - Rev. 7/15
49
RESIDENTIAL SLIDES
RESIDENTIAL SLIDES – POLYETHYLENE:
X-STREAM 2™ SLIDE: Water Supply System 90”
Assembles in Right OR Left Turn (shown as Right Turn)
RESIDENTIAL SLIDES
72.5” seating
F E AT U R E S : • Rotational Molded - Polyethylene Construction on Flume, Steps, Rails & Leg Supports (PVC Legs) • Available in Summit Gray & Desert Tan • 1 SKU Assembles in Right OR Left Turn • 72.5” High at Seating Area • Flume Width = 22.5” (centerline) • Flume Depth = 12.5” • Fantastic Water Supply System • 15-35 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
StableSafe™ Base
Deep Flume provides sliding comfort for all ages
• Stainless Steel Hardware • StableSafe™ Climbing System includes Heavy Fiberglass Stability Base, Deep SlipResistant Treads with Toe Stops, and GripAround™ Handrails • Weight Limit = 250 Lbs. • 3 Year Warranty
X-STREAM 2™ SLIDE X-Stream 2 Footprint for RIGHT Turn Slide
DESCRIPTION
PART NUMBER
X-Stream Slide - right/left - gray X-Stream Slide - right/left - tan
Part #XS-GR-SS Part #XS-TA-SS
comes w/ss hardware
RECOMMENDED MIN. DECK AREA: 14’ X 8’6”
50
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
X-STREAM 2™ SLIDE:
Assembles in Right OR Left Turn (shown as Right Turn)
90”
72.5” seating
RESIDENTIAL SLIDES
Water Supply System
F E AT U R E S : • Rotational Molded - Polyethylene Construction on Flume, Steps, Rails & Leg Supports (PVC Legs) • Available in Summit Gray & Desert Tan • 1 SKU Assembles in Right OR Left Turn • 72.5” High at Seating Area • Flume Width = 22.5” (centerline) • Flume Depth = 12.5” • Fantastic Water Supply System • 15-35 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
Deep Flume provides sliding comfort for all ages
StableSafe™ Base
• Stainless Steel Hardware • StableSafe™ Climbing System includes Heavy Fiberglass Stability Base, Deep SlipResistant Treads with Toe Stops, and GripAround™ Handrails • Weight Limit = 250 Lbs. • 3 Year Warranty
X-STREAM 2™ SLIDE X-Stream 2 Footprint for LEFT Turn Slide
DESCRIPTION
PART NUMBER
X-Stream Slide - right/left - gray X-Stream Slide - right/left - tan
Part #XS-GR-SS Part #XS-TA-SS
comes w/ss hardware
RECOMMENDED MIN. DECK AREA: 14’ X 8’6”
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
51
X-STREAM 2™ SLIDE
(XS-GR-SS) :
RESIDENTIAL SLIDES 52
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
X-STREAM 2™ SLIDE
(XS-GR-SS) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE.
<---
XS-101-SS: PVC Leg to Foot Receiver XS-102-SS: Flume to Flume XS-103-SS: PVC Leg to Flume XS-104-SS: Foot Receiver to Deck XS-105-SS: Handrails
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: XS-GR-SS
COMES AS PART OF ENTRY SECTION
STEP ASSEMBLY 1
1 1 1 5 4 8 16
25 15 25 15
6 6 12 6
13 13 13
8 8 10 8
12 5 4 14 10 4
3 1* 5* 10 ft.*
GRAY SPA HOSE FOR STEP ASSEMBLY, 10 FT. LENGTH COMPLETE ASSEMBLED STEP, INCLUDES ITEMS 8, 11, 12, & 29
XS2-105-SS
1 1 1 1 1 1 2
3/8” X 2-3/4” WEDGE ANCHOR W/NUT & FLAT WASHER S.S.
3/8” X 3” HEX HEAD TAP BOLT S.S. 3/8” X 2” HEX HEAD BOLT S.S. 3/8” X 2-1/2” ALL-THREAD STUD S.S. 5/16” FLAT WASHER S.S. 5/16” HEX FLANGE NUT S.S. 5/16” X 2” ALL-THREAD STUD S.S. 5/16” X 2-1/2” ALL-THREAD STUD S.S. U-SHAPED GASKET - 3 HOLES 1" BALL VALVE-SLIP GRAY NAT NYLON ROL 101 .375 DIA.
XS-104-SS
A & B RIGHT HAND FLUME SECTION C & D LEFT HAND FLUME SECTION BOTTOM SECTION TOP SIDE SECTION WITH WATER OUTLET LEFT HANDRAIL WITH X-STREAM LOGO RIGHT HANDRAIL WITH X-STREAM LOGO STRAIGHT FOOT PEDESTAL 16 DEGREE FOOT PEDESTAL 6" X 21.250" GRAY PVC PIPE SCHEDULE 40 6" X 45.375" GRAY PVC PIPE SCHEDULE 40 6" X 71.5" GRAY PVC PIPE SCHEDULE 40 X-STREAM BLOW MOLDED STEP GRAY PROTECTIVE CAP GRAY PROTECTIVE CAP 3/8” FINISH NUT S.S. 3/8” X 1” FLAT WASHER S.S. 3/8” LOCK WASHER S.S. 3/8” NYLON INSERT NUT S.S.
XS-103-SS
XS-RIGHT FLUME XS-LEFT FLUME XS-EXIT XS-ENTRY XS-L HANDRAIL XS-R HANDRAIL XS-FOOT PEDESTAL PEDESTAL H-6 X 21.250 H-6 X 45.375 H-6 X 71.5 XS-STEP H-.463 X .310 CAP H-.562 X .390 CAP H-SS 3/8 F NUT H-SS 3/8 FLT WASHER H-SS 3/8 LOC WASHER H-SS 3/8 NYLON H-SS 3/8 WEDGE H-SS 3/8 X 3 TAP H-SS 3/8-16X2 H-SS 3/8X2-1/2 H-SS 5/16 FLA WASHER H-SS 5/16 HEX FLANGE H-SS 5/16 X 2 H-SS 5/16 X 2-1/2 H-G4C GASKET H-1 BALL VALVE H-NYLON ROD 101 H-1 SPA HOSE XS2 WATER OUTLET XS-STEP COMP H-ANTI-SEIZE H-SS 3/8 X 7-1/2 H-SS 3/8 X 3-1/2 W H .531 X 1 GRAY
XS2-102-SS
DESCRIPTION
RESIDENTIAL SLIDES
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 * not pictured
COMPONENT
XS-101-SS
ITEM #
XS-GR-SS
HARDWARE KITS/PARTS KITS – QTY. COUNTS
1* 1
ANTI-SEIZE PACKET (NOT SHOWN) 3/8” X 7-1/2” HEX HEAD BOLT
6 5
3/8” X 3-1/2” WEDGE ANCHOR W/NUT & FLAT WASHER S.S.
.531” X 1” GRAY PROTECTIVE CAP
6
NOTES: X-Stream 2 slide available in Summit Gray or Desert Tan X-Stream 2 can turn to the right or the left
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
53
G-FORCE 2™ SLIDE: Water Supply System 88”
72” seating
RESIDENTIAL SLIDES
F E AT U R E S : • Rotational Molded - Polyethylene Construction on Flume, Steps, Rails & Leg Supports (PVC Legs) • Available in Summit Gray & Desert Tan • Assembles in One Direction Only With Straight Exit Into the Pool • 72” High at Seating Area • Flume Width = 22.5” (centerline) • Flume Depth = 13.5” • Fantastic Water Supply System • 15-35 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
• Stainless Steel Hardware • StableSafe™ Climbing System includes Heavy Fiberglass Stability Base, Deep Slip-Resistant Treads with Toe Stops, and Grip-Around™ Handrails • Weight Limit = 250 Lbs. • 3 Year Warranty StableSafe™ Base
G-FORCE 2™ SLIDE
Deep Flume Provides Sliding Comfort for All Ages
DESCRIPTION
PART NUMBER
G-Force Slide Complete - gray G-Force Slide Complete - tan
Part #G4C-G Part #G4C-T
comes w/ss hardware
G-Force 2 Footprint When Slide Pivoted From Rear to The Left
RECOMMENDED MIN. DECK AREA: 8’6” x 6’11”
54
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
G-FORCE 2™ SLIDE:
88”
72” seating
F E AT U R E S : • Rotational Molded - Polyethylene Construction on Flume, Steps, Rails & Leg Supports (PVC Legs) • Available in Summit Gray & Desert Tan • Assembles in One Direction Only With Straight Exit Into the Pool • 72” High at Seating Area • Flume Width = 22.5” (centerline) • Flume Depth = 13.5” • Fantastic Water Supply System • 15-35 GPM (Actual GPM rating will vary depending
RESIDENTIAL SLIDES
Water Supply System
on specific pool size and pool equipment used.)
• Stainless Steel Hardware • StableSafe™ Climbing System includes Heavy Fiberglass Stability Base, Deep Slip-Resistant Treads with Toe Stops, and Grip-Around™ Handrails • Weight Limit = 250 Lbs. • 3 Year Warranty StableSafe™ Base
Deep Flume Provides Sliding Comfort for All Ages
G-FORCE 2™ SLIDE DESCRIPTION
PART NUMBER
G-Force Slide Complete - gray G-Force Slide Complete - tan
Part #G4C-G Part #G4C-T
comes w/ss hardware
G-Force 2 Footprint When Slide Pivoted From Rear to The Right
RECOMMENDED MIN. DECK AREA: 8’6” x 6’11”
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
55
G-FORCE 2™ SLIDE
(G4C) :
RESIDENTIAL SLIDES 56
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
G-FORCE 2™ SLIDE
(G4C) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE.
<---
G4C-101: PVC Leg to Foot Receiver G4C-102: Flume to Flume G4C-103: PVC Leg to Flume; Helix to Pole G4C-104: Foot Receiver to Deck G4C-105: Handrails
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: G4C
H-SS 1/2 LOC WA H-SS 1/2X3-3/4 H-SS 3/8 ACORN H-SS 3/8 F NUT H-SS 3/8 FENDER H-SS 3/8 FLT WASHER H-SS 3/8 LOC WASHER H-SS 3/8 NYLON H-SS 3/8 WEDGE H-SS 3/8 X 3 TAP H-SS 3/8 X 3-1/2 W H-SS 3/8-16X2 H-SS 3/8X2-1/2 H-SS 3/8X5 BUTT H-SS 5/16 FLA WASHER H-SS 5/16 SER H-SS 5/16 X 2 H-SS 5/16 X 2-1/2 H-SS 5/16 X 3 G4C-STEP ASSEMBLY PEDESTAL XS-FOOT PEDESTAL G4C-WATER OUTLET H-6 x 17.125 G4C2-LEG EXT SS-HELIX TUBE G4C2-EXIT G4C2-HELIX G4C2-ENTRY G4C-R HANDRAIL G4C-L HANDRAIL H-G4C GASKET H-SS 3/8 X 7-1/2 H-.531 X 1 GRAY H-ANTI-SEIZE H-1 SPA HOSE
8
9 4
8
1/2” SPLIT LOCK WASHER S.S.
4 4
1/2” X 3-3/4” WEDGE ANCHOR W/NUT & FLAT WASHER S.S.
3/8” ACORN NUT 3/8” FINISH NUT S.S. 3/8” X 1-1/2” FENDER WASHER 3/8” X 1” FLAT WASHER S.S. 3/8” LOCK WASHER S.S. 3/8” NYLON INSERT NUT S.S.
10 16
15 10
2 4 4 8 4
9 9
8 4
3/8” X 2-3/4” WEDGE ANCHOR W/NUT & FLAT WASHER S.S.
3/8” X 3” HEX HEAD TAP BOLT S.S.
5 5
3/8” X 3-1/2” SS WEDGE ANCHOR W/NUT & FLAT WASHER
3/8” X 2” HEX HEAD BOLT S.S. 3/8” X 2-1/2” ALL-THREAD STUD S.S. 3/8” X 5” BUTTON HEAD SOCKET BOLT 5/16” FLAT WASHER S.S. 5/16” SERRATED FLANGE NUT 5/16” X 2” ALL-THREAD STUD S.S. 5/16” X 2-1/2” ALL-THREAD STUD S.S. 5/16” X 3” ALL-THREAD STUD S.S. COMPLETE ASSEMBLED STEP ASSEMBLY 16 DEGREE FOOT PEDESTAL STRAIGHT FOOT PEDESTAL WATER OUTLET (NOT SHOWN) 6 X 17.125 GRAY PVC PIPE SCHEDULE 40 G4C2 HELIX POLE EXTENSION STEEL CENTER SUPPORT POLE G4C2 EXIT SECTION G4C2 HELIX SECTION G4C2 ENTRY SECTION G-FORCE RIGHT HANDRAIL G-FORCE LEFT HANDRAIL GASKET FOR G-FORCE SLIDE 3/8” X 7-1/2 HEX HEAD BOLT S.S. .531 X 1” GRAY PROTECTIVE CAP ANTI-SEIZE PACKET (NOT SHOWN)
G4C
15
RESIDENTIAL SLIDES
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 * not pictured
8
G4C-105
GRAY PROTECTIVE CAP GRAY PROTECTIVE CAP .750” X 1” GRAY NUT CAP
G4C-104
DESCRIPTION
H-.463 X .310 CAP H-.562 X .390 CAP H-1 WHT CAP
G4C-103
COMPONENT
1 2 3
G4C-102
ITEM #
G4C-101
KITS – QTY. COUNTS
8
8 5
GRAY SPA HOSE FOR STEP ASSEMBLY, 10 FT. LENGTH
NOTES:
G-Force 2™ slide available in Summit Gray or Desert Tan
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
2 4 14 6 4 4 1 1 2 1 1 1 1 1 1 1 1 1 2 4 4 1* 10 ft.*
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
57
ADRENALINE™ SLIDE: Water Supply System 101”
Available in Right OR Left Turn (shown as Right Turn)
84” seating
F E AT U R E S : • Rotational Molded - Polyethylene Construction on Flume, Steps, Rails & Leg Supports (PVC Legs) • Available in Summit Gray & Desert Tan • Available in Right OR Left Turn • 84” High at Seating Area • Flume Width = 25” • Flume Depth = 14.4” • Fantastic Water Supply System • 15-35 GPM (Actual GPM rating will vary depending
RESIDENTIAL SLIDES
on specific pool size and pool equipment used.)
StableSafe™ Base
Deep Flume provides sliding comfort for all ages
Pre-launch Splash Zone™
• Stainless Steel Hardware • StableSafe™ Climbing System includes Heavy Fiberglass Stability Base, Deep Slip-Resistant Treads with Toe Stops, and Grip-Around™ Handrails • Pre-launch Splash Zone™ • Weight Limit = 300 Lbs. • 3 Year Warranty
ADRENALINE™ SLIDE DESCRIPTION
PART NUMBER
Adrenaline Slide - right - gray Adrenaline Slide - right - tan
Part #ADR1-CR-G Part #ADR1-CR-T
comes w/ss hardware
Adrenaline Footprint for RIGHT Turn Slide
58
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
ADRENALINE™ SLIDE: Water Supply System 101”
Available in Right OR Left Turn (shown as Left Turn)
84” seating
F E AT U R E S : • Rotational Molded - Polyethylene Construction on Flume, Steps, Rails & Leg Supports (PVC Legs) • Available in Summit Gray & Desert Tan • Available in Right OR Left Turn • 84” High at Seating Area • Flume Width = 25” • Flume Depth = 14.4” • Fantastic Water Supply System • 15-35 GPM (Actual GPM rating will vary depending
Pre-launch Splash Zone™
StableSafe™ Deep Flume Base provides sliding comfort for all ages
RESIDENTIAL SLIDES
on specific pool size and pool equipment used.)
• Stainless Steel Hardware • StableSafe™ Climbing System includes Heavy Fiberglass Stability Base, Deep Slip-Resistant Treads with Toe Stops, and Grip-Around™ Handrails • Pre-launch Splash Zone™ • Weight Limit = 300 Lbs. • 3 Year Warranty
ADRENALINE™ SLIDE DESCRIPTION
PART NUMBER
Adrenaline Slide - left - gray Adrenaline Slide - left - tan
Part #ADR1-CL-G Part #ADR1-CL-T
comes w/ss hardware
Adrenaline Footprint for LEFT Turn Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
59
ADRENALINE™ SLIDE
(ADR1-CR SHOWN) :
RESIDENTIAL SLIDES 60
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
ADRENALINE™ SLIDE
(ADR1-CR SHOWN) :
ALL CHART INFORMATION BELOW CORRESPONDS WITH THE DRAWING ON THE PREVIOUS PAGE.
<---
ADR-101-SS: PVC Leg to Foot ADR-102-SS: Flume to Flume ADR-103-SS: PVC Leg to Flume ADR-104-SS: Foot Pedestal to Deck ADR-105-SS: Handrails to Entry and Steps
DRAWING REPRESENTS THE FOLLOWING PART NUMBERS: ADR1-CR & ADR1-CL
ADR-WATER GSKT ADR-WATER OUTLE ADR-GASKET H-6 X 80.375 XS-STEP PEDESTAL H-6 X 40.750 H-6 X 19.750 XS-FOOT PEDESTA ADR-3/8X1/2 TUB ADR-RED CAP ADR-3/8 HOSE ADR-16 GA WIRE H-SS 3/8X3 TAP H-SS 3/8 FLT WA H-SS 3/8 F NUT H-SS 3/8 LOC WA H-.562X.390 CAP H-SS 3/8 X 9-1/2 H-SS 3/8-16X2HH H-SS 3/8 NYLON H-SS 3/8 WEDGE H-SS 3/8X3-1/2 W H-SS 5/16X4 AT H-SS 5/16X5 AT H-SS 5/16 SER H-SS 5/16X2-1/2 H-SS 5/16 F WAS H-.463X.310 CAP H-1 BALL VALVE H-NYLON ROD H-1 SPA HOSE H-ANTI-SEIZE
WATER OUTLET GASKET (FACTORY INSTALLED) WATER OUTLET (FACTORY INSTALLED) 3/8" "U" SHAPED FLANGE GASKET 6" X 80.375" GRAY PVC PIPE (STEP TUBE) BLOW MOLDED GRAY STEP STEP TUBE FOOT PEDESTAL GRAY 6" X 40.750" GRAY PVC PIPE 6" X 19.750" GRAY PVC PIPE STRAIGHT FOOT PEDESTAL 3/8" X 1/2" CLEAR VINYL TUBING RED VINYL CAP 3/8" HOSE CONNECTOR 16 GA FISH WIRE 3/8" X 3" HEX HEAD TAP BOLT S.S. 3/8" X 1" FLAT WASHER S.S. 3/8" FINISH NUT S.S. 3/8" LOCK WASHER S.S. GRAY VINYL PROTECTIVE CAP 3/8" X 9 1/2" HEX HEAD BOLT S.S. 3/8" X 2" HEX HEAD BOLT S.S. 3/8" NYLON INSERT NUT S.S.
1 1 3 1 6 1 1 1 2 12 FT 1 1 10 FT
1 1 3 1 6 1 1 1 2 12 FT 1 1 10 FT
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 * not pictured
16
8
12 6 6 12 6
17 17
8 8 8 9
3/8" X 2 3/4" WEDGE ANCHOR W/NUT AND FLAT WASHER S.S. 3/8" X 3 1/2" WEDGE ANCHOR W/NUT AND FLAT WASHER S.S.
5/16" X 4" ALL-THREAD STUD S.S. 5/16" X 5" ALL-THREAD STUD S.S. 5/16" FLANGE NUT S.S. 5/16" X 2 1/2" ALL-THREAD STUD S.S. 5/16" FLAT WASHER S.S. GRAY VINYL PROTECTIVE CAP 1" BALL VALVE SLIP GRAY (NOT SHOWN) NATURAL NYLON 101 .375" DIA. (NOT SHOWN) 1" GRAY SPA HOSE FLEX (NOT SHOWN) ANTI SEIZE PACKET (NOT SHOWN) ADRENALINE STEP/PEDESTAL ASSEMBLY
15 30 15 15 30
RESIDENTIAL SLIDES
1 1 1 1 1 1
ADR-105-SS
1 1 1 1 1 1
ADR-104-SS
ADR1-CL
ADRENALINE RIGHT (LEFT) ENTRY ADRENALINE RIGHT (LEFT) UPPER FLUME ADRENALINE RIGHT (LEFT) LOWER FLUME ADRENALINE RIGHT (LEFT) EXIT ADRENALINE RIGHT HANDRAIL ADRENALINE LEFT HANDRAIL
ADR-103-SS
DESCRIPTION
ADR-R (L) ENTRY ADR-R (L) UPPER FLU ADR-R (L) LOWER FLU ADR-R (L) EXIT ADR-R HANDRAIL ADR-L HANDRAIL
ADR-102-SS
COMPONENT
1 2 3 4 5 6
ADR-101-SS
ITEM #
ADR1-CR
HARDWARE KITS/PARTS KITS – QTY. COUNTS
6 4 16 6 6 6 1* 1* 6* 6* 12 ft.* 12 ft.* 1* 1* 1 1
NOTES: Adrenaline slide available in Summit Gray or Desert Tan Adrenaline slide is available in a right or left turn configuration
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Check your local electrical code requirements for bonding requirements.
TG - Rev. 7/15
61
LANDSCAPE SLIDES – INFUSION: BUILD YOUR OWN SLIDE (BYOS™) & GARDEN RIDE SLIDES (GRS™) The BYOS 1 & 2 slides are CUSTOM slides and must be ordered by following the quote and design process at Inter-Fab. Phone: 8 0 0 - 7 3 7 - 5 3 8 6 See pages 145-148 for BYOS quote forms.
RESIDENTIAL SLIDES
The Build Your Own Slide™ (BYOS™) products provide easy slide solutions to builders incorporating handcrafted rock work or concrete formations into custom backyard settings. LANDSCAPE SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 BYOS 1 PROJECT
FEATURES: • Three Collections (BYOS 1, BYOS 2, & Garden Ride Series) offer Custom Flume Sections That Can Be Used in Various Combinations (BYOS 1, BYOS 2, & Garden Ride Series Parts Are Not Interchangeable) • Zoom Flume™ Water Delivery System • Stainless Steel Construction Anchoring System Included with BYOS 1 & 2; Optional with GRS • Stainless Steel Hardware Included • Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • BYOS 1 Weight Limit = 250 lbs. • BYOS 2 Weight Limit = 350 lbs. • GRS Weight Limit = 350 lbs. • Multiple Patents Pending Check your local electrical code requirements for bonding requirements.
BYOS 2 PROJECT
15’ GRS
BYOS 1 & 2 SLIDES: Customizable by length and shape. (Must pass Inter-Fab safety requirements.) GARDEN RIDE SLIDES: Pre-set slide configurations available in 7’, 10’ and 15’ lengths; left and right turns available. MATCHING PRODUCTS AVAILABLE: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look. Add on matching products to your pool design to create a custom, color coordinated theme specific to the homeowner’s style and décor. T7 Diving System
62
TG - Rev. 7/15
Pool/Spa Table and Seats
To view our products online
Tanning Ledge Table with Cup Holders
CLICK 8
w w w. i n t e r - f a b . c o m
The BYOS 1 & 2 slides are CUSTOM slides and must be ordered by following the quote and design process at Inter-Fab. Phone: 8 0 0 - 7 3 7 - 5 3 8 6 BYOS 1 & BYOS 2 SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 BYOS 1 slides are designed for use in residential pool applications. BYOS 2 slides are designed for use in both residential pool applications and commercial pool applications. Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look.
BYOS FEATURES: • Collections of Different Flume Sections that can be Used in Various Combinations • Exclusive Zoom Flume™ Water Delivery System (TWO on BYOS 2 slide) • Stainless Steel Construction Anchoring System Included • Stainless Steel Hardware Included • Optional Handrails Available (Standard on BYOS 2) • Variety of Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • BYOS 1 Weight Limit = 250 lbs • BYOS 2 Weight Limit = 350 lbs. • BYOS 1 = 20-40 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.) (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
• BYOS 2 = 40-80 GPM
• Multiple Patents Pending • 1 Year Warranty • See pages 145-148 for BYOS Quote Forms
BYOS 1 SLIDE: 1
2 3 4 5 6
Zoom Flume™ Water Supply System
7 8
BYOS 1 Anchors Compatible with 18” Sonotubes*
9
10
BYOS 1 Flume Dimensions
1
BYOS 2 SLIDE: 2 3
4
5 6 7
BYOS 2 Anchors Compatible with 18” Sonotubes*
TWO Zoom Flume™ Water Supply Systems BYOS 2 Flume Dimensions
* Refer to the BYOS 1 & 2 installation manual for details.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
63
RESIDENTIAL SLIDES
BYOS 1™ & BYOS 2™ SLIDES:
GARDEN RIDE SERIES – 7’ SLIDE: Part # GRS7-CR-XX comes w/ss hardware
F E AT U R E S : • Exclusive Zoom Flume™ Water Delivery System • Optional Stainless Steel Anchoring System Available • Stainless Steel Hardware Included • Powder Coated Handrails Included • Variety of Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • Weight Limit = 350 lbs. • 20-40 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
RESIDENTIAL SLIDES
• Multiple Patents Pending • Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look. • 1 Year Warranty • See page 149 for GRS Product Selection Guide GARDEN RIDE SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 (add custom color code behind part #)
7’ Garden Ride Footprint for RIGHT Turn Slide
64
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
GARDEN RIDE SERIES – 7’ SLIDE: Part # GRS7-CL-XX comes w/ss hardware
F E AT U R E S : • Exclusive Zoom Flume™ Water Delivery System • Optional Stainless Steel Anchoring System Available • Stainless Steel Hardware Included • Powder Coated Handrails Included • Variety of Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • Weight Limit = 350 lbs. • 20-40 GPM (Actual GPM rating will vary depending on specific pool size
GARDEN RIDE SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 (add custom color code behind part #)
7’ Garden Ride Footprint for LEFT Turn Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
65
RESIDENTIAL SLIDES
and pool equipment used.)
• Multiple Patents Pending • Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look. • 1 Year Warranty • See page 149 for GRS Product Selection Guide
GARDEN RIDE SERIES – 10’ SLIDE: Part # GRS10-CR-XX comes w/ss hardware
F E AT U R E S : • Exclusive Zoom Flume™ Water Delivery System • Optional Stainless Steel Anchoring System Available • Stainless Steel Hardware Included • Powder Coated Handrails Included • Variety of Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • Weight Limit = 350 lbs. • 20-40 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
RESIDENTIAL SLIDES
• Multiple Patents Pending • Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look. • 1 Year Warranty • See page 149 for GRS Product Selection Guide GARDEN RIDE SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 (add custom color code behind part #)
10’ Garden Ride Footprint for RIGHT Turn Slide
66
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
GARDEN RIDE SERIES – 10’ SLIDE: Part # GRS10-CL-XX comes w/ss hardware
F E AT U R E S : • Exclusive Zoom Flume™ Water Delivery System • Optional Stainless Steel Anchoring System Available • Stainless Steel Hardware Included • Powder Coated Handrails Included • Variety of Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • Weight Limit = 350 lbs. • 20-40 GPM (Actual GPM rating will vary depending on specific pool size
GARDEN RIDE SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 (add custom color code behind part #)
10’ Garden Ride Footprint for LEFT Turn Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
67
RESIDENTIAL SLIDES
and pool equipment used.)
• Multiple Patents Pending • Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look. • 1 Year Warranty • See page 149 for GRS Product Selection Guide
GARDEN RIDE SERIES – 15’ SLIDE: Part # GRS15-CR-XX comes w/ss hardware
F E AT U R E S : • Exclusive Zoom Flume™ Water Delivery System • Optional Stainless Steel Anchoring System Available • Stainless Steel Hardware Included • Powder Coated Handrails Included • Variety of Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • Weight Limit = 350 lbs. • 20-40 GPM (Actual GPM rating will vary depending on specific pool size and pool equipment used.)
RESIDENTIAL SLIDES
• Multiple Patents Pending • Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look. • 1 Year Warranty • See page 149 for GRS Product Selection Guide GARDEN RIDE SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 (add custom color code behind part #)
15’ Garden Ride Footprint for RIGHT Turn Slide
68
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
GARDEN RIDE SERIES – 15’ SLIDE: Part # GRS15-CL-XX comes w/ss hardware
F E AT U R E S : • Exclusive Zoom Flume™ Water Delivery System • Optional Stainless Steel Anchoring System Available • Stainless Steel Hardware Included • Powder Coated Handrails Included • Variety of Earth Tones & Granite Colors Available • Advanced High-Tech RTM Manufacturing • Weight Limit = 350 lbs. • 20-40 GPM (Actual GPM rating will vary depending on specific pool size
GARDEN RIDE SLIDE COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise -59; and Starry Night: -60 (add custom color code behind part #)
15’ Garden Ride Footprint for LEFT Turn Slide
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
69
RESIDENTIAL SLIDES
and pool equipment used.)
• Multiple Patents Pending • Matching Products: The T7 Diving System™, Pool/Spa Table™, Pool/Spa Seat™, and Tanning Ledge Tables™ are designed to match the Landscape Slide products perfectly for a complete designer pool look. • 1 Year Warranty • See page 149 for GRS Product Selection Guide
INSTALLATION HEIGHT INFORMATION FOR GARDEN RIDE SERIES – 7’ SLIDE:
MEASUREMENTS: 7’ GRS LEFT TURN
RESIDENTIAL SLIDES
LEFT TURN WITH SUPPORTS
LEFT TURN WITHOUT SUPPORTS
MEASUREMENTS: 7’ GRS RIGHT TURN
RIGHT TURN W/SUPPORTS
RIGHT TURN WITHOUT SUPPORTS
SLIDE POSITION: 7’ GRS
GRID INCREMENTS IN FEET
GRID INCREMENTS IN FEET
7’ GRS Left Turn
7’ GRS Right Turn
NOTE: Please refer to the installation manual for detailed installation instructions and information.
70
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
INSTALLATION HEIGHT INFORMATION FOR GARDEN RIDE SERIES – 10’ SLIDE:
LEFT TURN WITH SUPPORTS
RESIDENTIAL SLIDES
MEASUREMENTS: 10’ GRS LEFT TURN
LEFT TURN WITHOUT SUPPORTS
MEASUREMENTS: 10’ GRS RIGHT TURN
RIGHT TURN W/SUPPORTS
RIGHT TURN WITHOUT SUPPORTS
SLIDE POSITION: 10’ GRS
GRID INCREMENTS IN FEET
GRID INCREMENTS IN FEET
10’ GRS Left Turn
10’ GRS Right Turn
NOTE: Please refer to the installation manual for detailed installation instructions and information.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
71
INSTALLATION HEIGHT INFORMATION FOR GARDEN RIDE SERIES – 15’ SLIDE:
MEASUREMENTS: 15’ GRS LEFT TURN
RESIDENTIAL SLIDES
LEFT TURN WITH SUPPORTS
LEFT TURN WITHOUT SUPPORTS
MEASUREMENTS: 15’ GRS RIGHT TURN
RIGHT TURN W/SUPPORTS
RIGHT TURN WITHOUT SUPPORTS
SLIDE POSITION: 15’ GRS
GRID INCREMENTS IN FEET
GRID INCREMENTS IN FEET
15’ GRS Left Turn
15’ GRS Right Turn
NOTE: Please refer to the installation manual for detailed installation instructions and information.
72
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
TRADITIONAL RAILS & LADDERS: OVERVIEW FEATURES: • Durable & Long Lasting Residential .049” wall Stainless Steel Construction (304 SS & 316L) • Most Rails also Available in Commercial .065” wall Construction (304 SS & 316L) • Rail Categories: 1) Ladders 2) Stair Rails 3) Handrails 4) Grab/Spa Rails 5) Exercise Bars
We offer a zinc anode to help protect your rails in more corrosive pool environments. The anode can be attached on a ladder near the ladder bumper or on a standard rail near the escutcheon. (Part #ANODE)
CUSTOM POWDER COATED COLORS FOR ALL RAIL GOODS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (You must add the custom color code behind part # when ordering.) On ALL powder coated rails, the bottom 4” of the stainless steel rail is NOT coated. If you use 3” anchors, a 3” option is available upon request. THERMO PLASTIC COATED COLORS FOR ALL RAIL GOODS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (You must add the custom color code behind part # when ordering.) All thermo plastic coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps. 3 LADDER TREADS AVAILABLE: (See Price List for Ladder-Specific Availability) 1) Sure Step Tread* 2) High Impact Plastic Tread** 3) Hartley Tread*** *add S after part # when ordering with Sure Step Tread **add -P-W after part # when ordering with High Impact Plastic Tread (white only) ***add -S-H after part # when ordering with Hartley Tread (PC and TPC only) STANDARD TREAD CONSTRUCTION: • HIGH IMPACT PLASTIC TREAD (HIP) • available in white only • tread weight limit = 250 lbs. • Residential Use Only
• SURE-STEP TREAD (SUT) • shown in stainless steel • available in powder coat & thermo plastic coating • tread weight limit = 250 lbs.
• HARTLEY TREAD (SST-H) • available in powder coat and thermo plastic coat only • tread weight limit = 250 lbs.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
73
RAIL PRODUCTS
• Anchors are not included and recommended. • NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. HIP treads for RESIDENTIAL use only.
TRADITIONAL RAILS & LADDERS: OVERVIEW – CONTINUED
RAIL GOODS ALLOY AND FINISH AVAILABILITY WALL THICKNESS
1.90” OD
.049”
304 316L (MG) PC TPC
.065”
304 316L (MG) PC TPC
.109”
304 PC TPC
.145”
304 PC TPC 304 316L (MG) PC TPC
1.50” OD
RAIL PRODUCTS
KEY: 304 316L (MG) PC TPC
.120”
Pool Grade Alloy Marine Grade Alloy Powder Coated by Inter-Fab Thermo Plastic Coated by Inter-Fab
PLEASE NOTE: Some rail combinations listed above may be special order. Please consult your Inter-Fab sales representative for detailed information.
RAIL FINISHES AVAILABLE: (please see price list for rail-specific availability) POWDER COATED: (you must add the custom color code behind part # when ordering) White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 THERMO PLASTIC COATED: (you must add the custom color code behind part # when ordering) White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T
OPTIONS BELOW HELP PROTECT AGAINST HARSH ENVIRONMENTS:
PC
POWDER COAT FINISH: Baked on powder coat colors protect against harsh environments.
TP
THERMO PLASTIC COAT FINISH: Advanced Polymer Coating adds grip assistance and rail protection for harsh pool environments.
MG
MARINE GRADE RAILS: A 316L alloy option for harsh pool environments.
74
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
TRADITIONAL LADDERS – RAIL DESIGNS:
RESIDENTIAL LADDERS DESCRIPTION
PART NUMBER
2 3 3 4 5 3 3 3
Part Part Part Part Part Part Part Part
Tread Tread Tread Tread Tread Tread Tread Tread
Standard Economy Standard Standard Standard Camelback Mod Camelback Hinged
#L2049 #L3E049 #L3049 #L4049 #L5049 #CL3049 #MCL3049 #HL3049
3 Tread Standard Part #L3049
3 Tread Mod Camelback Part #MCL3049
3 Tread Camelback Part #CL3049
3 Tread Hinged Part #HL3049
COMMERCIAL LADDERS PART NUMBER
2 Tread Commercial Ladder
Part #COML2065
3 4 2 3 4
Part Part Part Part Part
Tread Tread Tread Tread Tread
Commercial Commercial Commercial Commercial Commercial
Ladder Ladder Cross Brace Ladder Cross Brace Ladder Cross Brace Ladder
#COML3065 #COML4065 #COML2CB065 #COML3CB065 #COML4CB065 3 Tread Commercial Part #COML3065
NOTE: Commercial Ladders are available in 24”, 30”, 36” spans. See Price Book. Commercial Ladders available with SUT or SST-H treads ONLY.
3 Tread Commercial Cross Brace Part #COML3CB065
RAIL PRODUCTS
DESCRIPTION
FLORIDA STYLE LADDERS DESCRIPTION
PART NUMBER
3 Tread Florida Cross Brace Ladder 4 Tread Florida Cross Brace Ladder
Part #FLL3CB049 Part #FLL4CB049
NOTE: 3 tread Florida Ladder is available in 24”, 30”, 34”, 36” spans. 4 tread Florida Ladder is available in 34” span only. See Price Book. Florida Ladders available with SUT or SST-H treads ONLY.
TREAD BOLT PACKS
(NOW 316L)
DESCRIPTION Ladder Bolt Kit (6 EA. SS) 2 Tread Ladder Bolt Kit w/Ladder 3 Tread Ladder Bolt Kit w/Ladder 4 Tread Ladder Bolt Kit w/Ladder 5 Tread Ladder Bolt Kit w/Ladder
OM CUST LS RAI LE! r ILA3B 55 fo AVpA 5 -1 ms. gs. 1 r o
3 Tread Florida Cross Brace Part #FLL3CB049
See om rail f cust
PART NUMBER Bumpers Bumpers Bumpers Bumpers
Part Part Part Part Part
#BOL316 #BOL316-2T #BOL316-3T #BOL316-4T #BOL316-5T
W/LB W/LB W/LB W/LB
Check your local electrical code requirements for bonding requirements.
NOTE: To order custom colored tread bolt kits, add the code for desired Powder Coated Colors or Thermo Plastic color behind part # when ordering.
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering) NOTE: On ALL powder coated rails, the bottom 4” of the stainless steel is NOT powder coated. If you use 3” anchors, a 3” option is available upon request.
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) NOTE: All thermo plastic coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps.
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
Please refer to the current price book to ensure rail finish availability.
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and are recommended. HIP treads for RESIDENTIAL use only.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
75
RESIDENTIAL – STANDARD:
PC TP
FEATURES: • Available in 2 Step through 5 Step • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD
MG
Standard - Available in 2 Step through 5 Step Part # L2049 - 2 Step Part # L3049 - 3 Step (shown) Part # L4049 - 4 Step Part # L5049 - 5 Step
RAIL PRODUCTS
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
RESIDENTIAL – ECONOMY:
PC TP
FEATURES: • Available in 3 Step Only • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD
MG
Standard - Economy 3 Step Part # L3E049
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
76
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
RESIDENTIAL – CAMELBACK:
PC TP
FEATURES: • Available in 3 Step Only • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD
MG
RAIL PRODUCTS
Camelback Ladder Part # CL3049
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
RESIDENTIAL – MODIFIED CAMELBACK:
PC TP
FEATURES: • Available in 3 Step through 5 Step • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD
MG
Modified Camelback Available in 3 Step through 5 Step Part # MCL3049 - 3 Step (shown) Part # MCL4049 - 4 Step Part # MCL5049 - 5 Step NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
77
COMMERCIAL AND COMMERCIAL - CROSS BRACED LADDERS:
FEATURES: • 2 Step through 5 Step • 24”, 30” and 36” Spans • 6” Radius Bends • 20” on Center Mount • 1.90” x .065” Wall Thickness • 304 or 316L Stainless Steel • Stainless Steel Sure Step Tread (SUT) • Anchors NOT included
RAIL PRODUCTS
Commercial Ladder Part # COML336065S (shown)
PART NUMBER COML224065S COML324065S COML424065S COML524065S COML230065S COML330065S COML430065S COML530065S COML236065S COML336065S COML436065S COML536065S COML2CB24065S COML3CB24065S COML4CB24065S COML5CB24065S COML2CB30065S COML3CB30065S COML4CB30065S COML5CB30065S COML2CB36065S COML3CB36065S COML4CB36065S COML5CB36065S
DESCRIPTION 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5
tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread tread
commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial commercial
ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder ladder
24" 24" 24" 24" 30" 30" 30" 30" 36" 36" 36" 36" 24" 24" 24" 24" 30" 30" 30" 30" 36" 36" 36" 36"
Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step Sure-Step
Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread Tread
w/ w/ w/ w/ w/ w/ w/ w/ w/ w/ w/ w/
crossbrace crossbrace crossbrace crossbrace crossbrace crossbrace crossbrace crossbrace crossbrace crossbrace crossbrace crossbrace
PC
PC
TP
TP
MG
MG
Commercial Ladder - Cross Braced Part # COML3CB24065S (shown)
A
B
C
D
E
26 26 26 26 26 26 26 26 31 31 31 31 26 26 26 26 26 26 26 26 31 31 31 31
24 24 24 24 30 30 30 30 36 36 36 36 24 24 24 24 30 30 30 30 36 36 36 36
17.5 17.5 17.5 17.5 23.5 23.5 23.5 23.5 29.5 29.5 29.5 29.5 17.5 17.5 17.5 17.5 23.5 23.5 23.5 23.5 29.5 29.5 29.5 29.5
51 61 71 81 51 61 71 81 61 71 81 91 51 61 71 81 51 61 71 81 61 71 81 91
25 35 45 55 25 35 45 55 30 40 50 60 25 35 45 55 25 35 45 55 30 40 50 60
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
78
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
PC TP MG
FEATURES: • Available in 3 Step and 4 Step • Available in 24”, 30”, 34” and 36” Span • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD
Florida Ladder Part # FLL3CB24049S (shown) Florida Style - Available in 3 Step and 4 Step and in 24”, 30”, 34” & 36” Span Part # FLL3CB24049 - 3 Step Florida w/24” Span Part # FLL3CB30049 - 3 Step Florida w/30” Span Part # FLL3CB34049 - 3 Step Florida w/34” Span Part # FLL4CB34049 - 4 Step Florida w/34” Span NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated Part # FLL3CB36049 - 3 Step Florida w/36” Span ladders and rails. All measurements on center. Anchors are not included and recommended.
RESIDENTIAL – HINGED LADDER:
PC
FEATURES: • Available in 3 Step Only • For Use With Automatic Pool Covers • .049” Wall Stainless Steel Construction • 304 SS • 1.90” OD
Hinged Ladder Part # HL3049
NOTE: All measurements on center. Anchors are not included and recommended. Escutcheons sold separately w/SS products; included with powder coated.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
79
RAIL PRODUCTS
FLORIDA STYLE W/CROSS BRACE:
TRADITIONAL STAIR RAILS – RAIL DESIGNS:
STAIR RAILS DESCRIPTION
PART NUMBER
50” Deck to Deck Stair Rail - 3 Bend .049 wall 50” Deck to Deck Stair Rail - 3 Bend .065 wall 60” Deck to Deck Stair Rail - 3 Bend .049 wall 60” Deck to Deck Stair Rail - 3 Bend .065 wall Deck to Deck Stair Rail - 4 Bend .049 wall Deck to Deck Stair Rail - 4 Bend .065 wall Deck to Deck Braced Stair Rail - 3 Bend .049 wall Deck to Deck Braced Stair Rail - 3 Bend .065 wall Deck to Deck Braced Stair Rail - 4 Bend .049 wall Deck to Deck Braced Stair Rail - 4 Bend .065 wall
Part Part Part Part Part Part Part Part Part Part
#D3D50049 #D3D50065 #D3D60049 #D3D60065 #D4D049 #D4D065 #D3BD049 #D3BD065 #D4BD049 #D4BD065
OM CUST LS RAI LE! for ILA3B -155 . AVpA 5 1 gs. orms
See om rail f cust
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering) NOTE: On ALL powder coated rails, the bottom 4” of the stainless steel is NOT powder coated. If you use 3” anchors, a 3” option is available upon request. RAIL PRODUCTS
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) NOTE: All thermo plastic coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps.
Deck to Deck Mounted 3 Bend Stair Rail Part# D3D50049
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
Please refer to the current price book to ensure rail finish availability.
Deck to Deck Mounted 3 Bend Stair Rail w/Brace Part# D3BD049
Deck to Deck Mounted 4 Bend Stair Rail Part# D4D049
Deck to Deck Mounted 4 Bend Stair Rail w/Brace Part# D4BD049
Check your local electrical code requirements for bonding requirements.
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
80
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
STAIR RAILS – 3 BEND:
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD
MG
RAIL PRODUCTS
Part # D3D50049
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
STAIR RAILS – 3 BEND – BRACED:
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD
MG
Part # D3BD049
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
81
STAIR RAILS – 4 BEND:
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD
PC TP MG
Part # D4D049
RAIL PRODUCTS
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
STAIR RAILS – 4 BEND – BRACED:
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD
MG
Part # D4BD049
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
82
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
TRADITIONAL HANDRAILS – RAIL DESIGNS:
HANDRAILS PART NUMBER
4’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 5’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 6’ Deck to Stair Rail - 2 Bends 4’ Deck to Stair Rail - 3 Bends 4’ Deck to Stair Rail - 3 Bends 4’ Deck to Stair Rail - 3 Bends 4’ Deck to Stair Rail - 3 Bends 4’ Deck to Stair Rail - 3 Bends 4’ Deck to Stair Rail - 3 Bends 4’ Deck to Stair Rail - 3 Bends 4’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 5’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 6’ Deck to Stair Rail - 3 Bends 7’ Deck to Stair Rail - 3 Bends 7’ Deck to Stair Rail - 3 Bends 7’ Deck to Stair Rail - 3 Bends 7’ Deck to Stair Rail - 3 Bends 7’ Deck to Stair Rail - 3 Bends 7’ Deck to Stair Rail - 3 Bends 8’ Deck to Stair Rail - 3 Bends 8’ Deck to Stair Rail - 3 Bends 8’ Deck to Stair Rail - 3 Bends 8’ Deck to Stair Rail - 3 Bends 8’ Deck to Stair Rail - 3 Bends 8’ Deck to Stair Rail - 3 Bends 2.5’ Stair Side Rail (pair) 3.0’ Stair Side Rail (pair) 3.5’ Stair Side Rail (pair)
w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/24” ext. w/two 12” ext. w/12” ext. w/two 12” ext. w/12” ext. w/two 12” ext. w/12” ext. w/two 12” ext. w/12” ext. w/two 12” ext.
Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part Part
#D2S4049 #D2S4049-12EXT #D2S4049-24EXT #D2S4049-12X2 #D2S4065 #D2S4065-12EXT #D2S4065-24EXT #D2S4065-12X2 #D2S5049 #D2S5049-12EXT #D2S5049-24EXT #D2S5049-12X2 #D2S5065 #D2S5065-12EXT #D2S5065-24EXT #D2S5065-12X2 #D2S6049 #D2S6049-12EXT #D2S6049-24EXT #D2S6049-12X2 #D2S6065 #D2S6065-12EXT #D2S6065-24EXT #D2S6065-12X2 #D3S4049 #D3S4049-12EXT #D3S4049-24EXT #D3S4049-12X2 #D3S4065 #D3S4065-12EXT #D3S4065-24EXT #D3S4065-12X2 #D3S5049 #D3S5049-12EXT #D3S5049-24EXT #D3S5049-12X2 #D3S5065 #D3S5065-12EXT #D3S5065-24-EXT #D3S5065-12X2 #D3S6049 #D3S6049-12EXT #D3S6049-24EXT #D3S6049-12X2 #D3S6065 #D3S6065-12EXT #D3S6065-24EXT #D3S6065-12x2 #D3S7049 #D3S7049-12EXT #D3S7049-12X2 #D3S7065 #D3S7065-12EXT #D3S7065-12x2 #D3S8049 #D3S8049-12EXT #D3S8049-12X2 #D3S8065 #D3S8065-12EXT #D3S8065-12x2 #D2D2.5049 #D2D3.0049 #D2D3.5049
NOTE: All Deck to Stair rails are available with 12” extension on pool side leg, 24” extension on pool side leg, or 12” extensions on both legs.
Deck to Stair Mounted 2 Bend Handrail Part# D2S4049
Deck to Stair Mounted 3 Bend Handrail Part# D3S4049
OM CUST LS RAI LE! LAB or AVgAs.I 153-15r5mfs.
See p om rail fo cust
Deck to Deck Mounted Stair Side Mounted Rail Part# D2D3.0049
Check your local electrical code requirements for bonding requirements.
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
Please refer to the current price book to ensure rail finish availability.
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering) NOTE: On ALL powder coated rails, the bottom 4” of the stainless steel is NOT powder coated. If you use 3” anchors, a 3” option is available upon request. THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) NOTE: All thermo plastic coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps. ADA NOTE: In order to meet the ADA minimum vertical handrail height requirement, we are modifying our commercial handrails to be 34” off the deck at the TOP of the rail. In the past, we have indicated the on center measurements. The following is the requirement under Titles II and III: “Section 505.4 Height. Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.” We are ONLY changing the commercial version of the rails, NOT the residential. NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
83
RAIL PRODUCTS
DESCRIPTION
HANDRAILS – 2 BEND:
PC TP MG
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 12” and 24” Extensions Available • 304 SS and 316L • 1.90” OD
Part # D2S4049
Please refer to the ADA Note on pg. 83
RAIL PRODUCTS
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
HANDRAILS – 3 BEND:
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 12” and 24” Extensions Available • 304 SS and 316L • 1.90” OD
MG
Part # D3S4049 Please refer to the ADA Note on pg. 83 NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
84
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
HANDRAILS – SIDE RAIL:
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD
MG
Part # D2D3.0049
RAIL PRODUCTS
NOTE: This product sold as pairs.
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
Gibralter Style Rails
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
85
TRADITIONAL GRAB RAILS/SPA RAILS – RAIL DESIGNS:
GRAB RAILS DESCRIPTION
PART NUMBER
Figure 4 Grab Rail (pair) Figure 4 Grab Rail (single rail only) Figure 4 Grab Rail (.065” wall) NEW Figure 4 Grab Rail (pair) Gibralter Style Rail (pair) Gibralter Style Rail (pair) Includes Anchor & Escutcheons Ring Style Grab Rail (pair) Ring Style Grab Rail (pair) Includes Anchor & Escutcheons Single Post Grab Rail (pair) Anchor Set Included
Part Part Part Part Part Part
#G3D049 #G3D049-SINGLE #G3D065 #G3DE049 #G4G049 #G4G049C
Part #G4D049 Part #G4D049C
Figure 4 Grab Rail Part# G3D049
Part #CT-3049
RAIL PRODUCTS
Gibralter Style Rail Part# G4G049
Ring Style Grab Rail Part# G4D049
NEW Figure 4 Grab Rail Part# G3DE049
Single Post Grab Rail Part# CT-3049
SPA RAIL DESCRIPTION
PART NUMBER
Single Post Spa Rail
Part #SPA 1900
Single Post Spa Rail without Flange Part# SPA 1900
Check your local electrical code requirements for bonding requirements.
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering) NOTE: On ALL powder coated rails, the bottom 4” of the stainless steel is NOT powder coated. If you use 3” anchors, a 3” option is available upon request. THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) NOTE: All thermo plastic coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps.
OM CUST LS RAI LE! LAB or AVAsI. 153-155mfs.
g r See p om rail fo cust
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
Please refer to the current price book to ensure rail finish availability.
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
86
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
FIGURE 4 GRAB RAIL:
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD
MG
RAIL PRODUCTS
Part # G3D049 (pair) Part # G3D049-SINGLE (single rail only) Part # G3D065 (pair, .065” wall)
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
ECONOMY FIGURE 4 GRAB RAIL:
PC TP MG
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • Economy Figure 4 Grab Rail is 7” Shorter in Height than Figure 4 Grab Rail • 304 SS and 316L • 1.90” OD
Part # G3DE049 (pair) Part # G3DE049-SINGLE (single) Part # G3DE065 (pair .065 wall)
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
87
GIBRALTER STYLE RAIL:
FEATURES: • .049” Wall Stainless Steel Construction • 304 SS • 1.625” OD
PC TP
Part # G4G049 (pair) Part # G4G049C (pair, complete w/anchor & escutcheons)
Part # GA-SET
RAIL PRODUCTS
NOTE: This product sold as pairs. NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
RING STYLE GRAB RAIL:
FEATURES: • .049” Wall Stainless Steel Construction • 304 SS • 1.625” OD
PC TP
Part # G4D049 (pair) Part # G4D049C (pair, complete w/anchor & escutcheons)
Part # GA-SET
NOTE: This product sold as pairs. NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
88
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
CT-3 GRAB RAIL:
PC
FEATURES: • .049” Wall Stainless Steel Construction • CT-3 Rail Uses Channel Anchor that Extends Out of the Deck Rail Does NOT Utilize In-Deck Anchors • 304 SS • 1.625” OD
Part # CT-3049 (pair, anchor included) Part # CT-3049single (single rail – for replacement only)
RAIL PRODUCTS
NOTE: This product sold as pairs. NOTE: Escutcheons sold separately w/SS products; included with powder coated rails. All measurements on center.
SINGLE POST SPA RAIL
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD
Part # SPA 1900
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
89
EXERCISE BARS – RAIL DESIGNS:
EXERCISE BARS DESCRIPTION 24” 36” 48” 60”
Exercise Exercise Exercise Exercise
OM CUST LS RAI LE! r ILA3B 55 fo AVpA 5 -1 ms. gs. 1 r o
PART NUMBER Bar Bar Bar Bar
without without without without
Flanges Flanges Flanges Flanges
Part Part Part Part
(1.900”x.049”wall) (1.900”x.049”wall) (1.900”x.049”wall) (1.900”x.049”wall)
#EB241900 #EB361900 #EB481900 #EB601900
See om rail f cust
NOTE: Exercise Bars available with flanges and hardware. *Add FL to end of part # to order with flange and hardware. See Price Book.
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering) NOTE: On ALL powder coated rails, the bottom 4” of the stainless steel is NOT powder coated. If you use 3” anchors, a 3” option is available upon request.
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
Please refer to the current price book to ensure rail finish availability.
RAIL PRODUCTS
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) NOTE: All thermo plastic coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps. Check your local electrical code requirements for bonding requirements.
Exercise Bar without Flange Part # EB361900
Exercise Bar with Flange Part # EB361900FL
NOTE: Escutcheons are not included with Exercise Bars without flanges. All measurements on center. Anchors are not included and recommended.
90
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
EXERCISE BARS – EMBEDDED:
FEATURES: • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD Available • Designed for In-Wall Installation
PC Part # EB361900 (without flanges)
TP
RAIL PRODUCTS
MG
NOTE: Escutcheons are not included with Exercise Bars without flanges. All measurements on center.
EXERCISE BARS – FLANGED:
Part # EB361900FL (with flanges)
FEATURES: • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD Available • Designed for On-Wall Installation • Comes with SS Mounting Hardware
PC TP MG
NOTE: All measurements on center.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
91
FILL SPOUTS:
FEATURES: • Durable & Long Lasting .049” wall Stainless Steel Construction • 304 SS • Available in 3/4”, 1”, and 1-1/2” • Designed for Stub-Up Installation • Available in 6 Powder Coated Finishes
PC
Part # FS-3/4 SPOUT Part # FS-1 SPOUT Part # FS-1 1/2 SPOUT
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering)
RAIL PRODUCTS Standard Residential Ladder shown in powder coat
92
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
DESIGNER SERIES RAILS – RAIL DESIGNS:
DESIGNER GRAB RAILS DESCRIPTION
PART NUMBER
DR-G3D Grab Rail – pair DR-G3D Grab Rail – single DR-G3DE Grab Rail – pair DR-G3DE Grab Rail – single
Part Part Part Part
#DR-G3D065 #DR-G3D065-SINGLE #DR-G3DE065 #DR-G3DE065-SINGLE
DR-G3D Grab Rail Part# DR-G3D065-SINGLE
DR-G3DE Grab Rail Part# DR-G3DE065-SINGLE
DESIGNER DECK TO DECK RETURN STAIR RAIL PART NUMBER
DR-D3D Deck to Deck Return Stair Rail
Part #DR-D3D50065
Designer Deck to Deck Return Stair Rail Part# DR-D3D50065
DESIGNER DECK TO DECK STAIR HANDRAIL DESCRIPTION
PART NUMBER
DR-D2D3 Deck to Deck Stair Handrail – pair
Part #DR-D2D3.0065
Designer Deck to Deck Stair Handrail Part# DR-D2D3.0065 sold as pair
DESIGNER DECK TO STAIR HANDRAIL DESCRIPTION
PART NUMBER
DR-D2S Deck to Stair Handrail – 4’ span DR-D2S Deck to Stair Handrail – 5’ span DR-D2S Deck to Stair Handrail – 6’ span
Part #DR-D2S4065 Part #DR-D2S5065 Part #DR-D2S6065
Designer Deck to Stair Handrail Part# DR-D2S6065 shown sold as pair
DESIGNER LADDERS DESCRIPTION Designer Designer Designer Designer
3 3 4 4
Tread Tread Tread Tread
PART NUMBER Ladder Ladder Ladder Ladder
w/HIP Tread w/SUT Tread w/HIP Tread w/SUT Tread
Part Part Part Part
#DR-L3065P-W #DR-L3065S #DR-L4065P-W #DR-L4065S
Designer Ladder Part# DR-L3065P-W shown sold as pair
Form Follows Function... The Designer Rail design follows the function of the traditional rail. Check your local electrical code requirements for bonding requirements.
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering) NOTE: On ALL powder coated rails, the bottom 4” of the stainless steel is NOT powder coated. If you use 3” anchors, a 3” option is available upon request.
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) NOTE: All thermo plastic coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
PC
POWDER COAT
TP
THERMO PLASTIC
MG
MARINE GRADE
Please refer to the current price book to ensure rail finish availability.
TG - Rev. 7/15
93
RAIL PRODUCTS
DESCRIPTION
DESIGNER DR-G3D GRAB RAIL:
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness
PC TP MG
DR-G3D Grab Rail: Part # DR-G3D065 (pair) Part # DR-G3D065-SINGLE (single)
NOTE: This product sold as pairs. RAIL PRODUCTS
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
DESIGNER DR-G3DE GRAB RAIL:
PC
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness
TP MG
DR-G3DE Grab Rail: Part # DR-G3DE065 (pair) Part # DR-G3DE065-SINGLE (single)
NOTE: This product sold as pairs. NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
94
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
DESIGNER DECK TO DECK RETURN STAIR RAIL:
PC TP
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness
MG
RAIL PRODUCTS
DR-D3D Deck to Deck Return Stair Rail: Part # DR-D3D50065
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
DESIGNER DR-D2D3 DECK TO DECK STAIR HANDRAIL:
PC TP
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness
MG
DR-D2D3 Deck to Deck Stair Handrail: Part # DR-D2D3.0065
NOTE: This product sold as pairs. NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
95
DESIGNER D2S DECK TO STAIR HANDRAIL:
PC TP
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness
MG
D2S Deck to Stair Handrail: Part # DR-D2S4065 - 4’ span Part # DR-D2S5065 - 5’ span (shown) Part # DR-D2S6065 - 6’ span
RAIL PRODUCTS
NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
DESIGNER LADDER:
PC TP
FEATURES: • Available in 3 Step and 4 Step • 304 SS and 316L • 1.90” x .065” Wall Thickness
MG
Designer Ladders: Part # DR-L3065P-W - 3 Tread Ladder w/HIP Tread (shown) Part # DR-L3065S - 3 Tread Ladder w/SUT Tread Part # DR-L4065P-W - 4 Tread Ladder w/HIP Tread Part # DR-L4065S - 4 Tread Ladder w/SUT Tread *HIP Treads for Residential Use Only NOTE: Escutcheons sold separately w/SS products; included with powder coated and thermo plastic coated ladders and rails. All measurements on center. Anchors are not included and recommended.
96
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
AFTERMARKET DECK TOP MOUNTED RAILS: OVERVIEW NEW Deck Top Mounting devised for use in Lieu of Anchor Sockets. escutcheon
FEATURES: • Standard Offering: Pool Grade (304) Alloy • Optional Upgrade: Marine Grade (316L) Alloy • Select Styles Available Include Traditional and Designer Series: Stair Rails, Grab Rails, and Ladders • Perfect for Aftermarket Applications • Includes Escutcheons & Mounting Hardware DR-D3D50065-FL
flange drop anchor
mounting hardware
RAIL PRODUCTS
D4D049-FL
drop anchor setting tool
RAIL FINISHES AVAILABLE: (please see price list for rail-specific availability) POWDER COATED: (you must add the custom color code behind part # when ordering) White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 THERMO PLASTIC COATED: (you must add the custom color code behind part # when ordering) White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T OPTIONS BELOW HELP PROTECT AGAINST HARSH ENVIRONMENTS:
PC
POWDER COAT FINISH: Baked on powder coat colors protect against harsh pool environments.
TP
THERMO PLASTIC COAT FINISH: Advanced Polymer Coating adds rail protection in harsh pool environments.
MG
MARINE GRADE RAILS: A 316L alloy option for harsh pool environments.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
97
AFTERMARKET DECK TOP MOUNTED RAILS - RAIL DESIGNS:
DECK TOP GRAB RAILS DESCRIPTION
PART NUMBER
Deck Deck Deck Deck Deck Deck Deck Deck
Part Part Part Part Part Part Part Part
Top Top Top Top Top Top Top Top
Grab Rail – pair Grab Rail – single Economy Grab Rail – pair Economy Grab Rail – single Designer Grab Rail – pair Designer Grab Rail – single Designer Economy Grab Rail – pair Designer Economy Grab Rail – single
#G3D049-FL #G3D049-FL-SINGLE #G3DE049-FL #G3DE049-FL-SINGLE #DR-G3D065-FL #DR-G3D065-FL-SINGLE #DR-G3DE065 #DR-G3DE065-FL-SINGLE
Deck Top Grab Rail Part# G3D049-FL
Deck Top Economy Grab Rail Part# G3DE049-FL
NOTE: Designer Rails ONLY Available in 1.90 x .065.
Deck Top Designer Grab Rail Part# DR-G3D065-FL-SINGLE
DECK TOP DECK TO DECK RETURN STAIR RAILS
RAIL PRODUCTS
DESCRIPTION
PART NUMBER
Deck Deck Deck Deck Deck
Part Part Part Part Part
Top Top Top Top Top
3 Bend Deck to Deck Return Stair Rail 3 Bend Braced Deck to Deck Return Stair Rail 4 Bend Deck to Deck Return Stair Rail 4 Bend Braced Deck to Deck Return Stair Rail Designer Deck to Deck Return Stair Rail
#D3D50049-FL #D3BD049-FL #D4D049-FL #D4BD049-FL #DR-D3D50065-FL Deck Top Deck to Deck 3 Bend Stair Rail Part# D3D50049-FL
Check your local electrical code requirements for bonding requirements.
Deck Top Deck to Deck 4 Bend Stair Rail Part# D4D049-FL
Deck Top Deck to Deck 4 Bend Stair Rail w/Brace Part# D4BD049-FL
DECK TOP DECK TO DECK STAIR HANDRAIL DESCRIPTION
Deck Top Designer Economy Grab Rail Part# DR-G3DE065-FL-SINGLE
Deck Top Deck to Deck 3 Bend Braced Stair Rail Part# D3BD049-FL
Deck Top Designer Deck to Deck Return Stair Rail Part# DR-D3D50065-FL Deck Top Designer Deck to Deck Stair Handrail Part# DR-D2D3.0065-FL (sold as pair)
PART NUMBER
Deck Top Designer Deck to Deck Stair Handrail – pair Part #DR-D2D3.0065-FL
DECK TOP LADDERS DESCRIPTION
PART NUMBER
Deck Top 3 Tread Ladder w/HIP Tread Deck Top 3 Tread Ladder w/SUT Tread Deck Top 4 Tread Ladder w/HIP Tread Deck Top 4 Tread Ladder w/SUT Tread Deck Top Designer 3 Tread Ladder w/HIP Tread Deck Top Designer 3 Tread Ladder w/SUT Tread Deck Top Designer 4 Tread Ladder w/HIP Tread Deck Top Designer 4 Tread Ladder w/SUT Tread
Part Part Part Part Part Part Part Part
#L3065P-W-FL #L3065S-FL #L4049P-W-FL #L4049S-FL #DR-L3065P-W-FL #DR-L3065S-FL #DR-L4065P-W-FL #DR-L4065S-FL
NOTE: HIP (High Impact Plastic) Treads for Residential Use ONLY.
98
TG - Rev. 7/15
To view our products online
Deck Top 3 Tread Ladder Part #L3049S-FL (shown)
CLICK 8
Deck Top Designer 3 Tread Ladder Part# DR-L3065P-W-FL (shown)
w w w. i n t e r - f a b . c o m
DECK TOP – 3 BEND:
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD • Escutcheons & Mounting Hardware Included
PC TP MG
Part # D3D50049-FL
(see note)
RAIL PRODUCTS
*NOTE RAIL PLACEMENT: The forward deck flange (toward pool) must set back a minimum distance of 2.5” from the vertical pool wall.
NOTE: All measurements on center.
DECK TOP – 3 BEND – BRACED:
PC TP
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • Escutcheons & Mounting Hardware Included
MG
Part # D3BD049-FL
(see note)
*NOTE RAIL PLACEMENT: The forward deck flange (toward pool) must set back a minimum distance of 2.5” from the vertical pool wall.
NOTE: All measurements on center.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
99
DECK TOP – 4 BEND:
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD • Escutcheons & Mounting Hardware Included
PC TP MG
Part # D4D049-FL
(see note)
*NOTE RAIL PLACEMENT: The forward deck flange (toward pool) must set back a minimum distance of 2.5” from the vertical pool wall.
RAIL PRODUCTS
NOTE: All measurements on center.
DECK TOP – 4 BEND – BRACED:
PC TP MG
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD • Escutcheons & Mounting Hardware Included
Part # D4BD049-FL (see note)
*NOTE RAIL PLACEMENT: The forward deck flange (toward pool) must set back a minimum distance of 2.5” from the vertical pool wall.
NOTE: All measurements on center.
100
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
DECK TOP FIGURE 4:
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • 304 SS and 316L • 1.90” OD • Escutcheons & Mounting Hardware Included
PC TP MG
RAIL PRODUCTS
Part # G3D049-FL (pair) Part # G3D049-FL-SINGLE (single rail only)
NOTE: All measurements on center.
DECK TOP ECONOMY FIGURE 4:
PC TP MG
FEATURES: • .049” Wall Stainless Steel Construction • Available in Commercial Grade .065” • Economy Figure 4 Grab Rail is 7” Shorter in Height than standard Figure 4 Grab Rail • 304 SS and 316L • 1.90” OD • Escutcheons & Mounting Hardware Included
Part # G3DE049-FL (pair) Part # G3DE049-FL-SINGLE (single rail only)
NOTE: All measurements on center.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
101
DECK TOP LADDER:
FEATURES: • Available in 3 Step and 4 Step • .049” Wall Stainless Steel Construction • 304 SS and 316L • 1.90” OD • Escutcheons & Mounting Hardware Included
PC TP MG
Standard - Available in 3 Step and 4 Step Part # L3049P-W-FL - 3 Step w/HIP Tread Part # L3049S-FL - 3 Step w/SUT Tread (shown) Part # L4049P-W-FL - 4 Step w/HIP Tread Part # L4049S-FL - 4 Step w/SUT Tread
RAIL PRODUCTS
NOTE: HIP (High Impact Plastic) Treads for Residential Use ONLY. NOTE: All measurements on center.
DESIGNER DECK TOP LADDER:
FEATURES: • Available in 3 Step through 4 Step • 304 SS and 316L • 1.90” x .065” Wall Thickness • Escutcheons & Mounting Hardware Included
PC TP MG
Designer - Available in 3 Step and 4 Step Part # DR-L3065P-W-FL - 3 Step w/HIP Tread (shown) Part # DR-L3065S-FL - 3 Step w/SUT Tread Part # DR-L4065P-W-FL - 4 Step w/HIP Tread Part # DR-L4065S-FL - 4 Step w/SUT Tread NOTE: HIP (High Impact Plastic) Treads for Residential Use ONLY. NOTE: All measurements on center.
102
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
DESIGNER DECK TOP GRAB RAIL:
PC TP
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness • Escutcheons & Mounting Hardware Included
MG
RAIL PRODUCTS
DR-G3D Grab Rail: Part # DR-G3D065-FL (pair) Part # DR-G3D065-FL-SINGLE (single rail only)
NOTE: All measurements on center.
DESIGNER DECK TOP ECONOMY GRAB RAIL:
PC TP
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness • Escutcheons & Mounting Hardware Included
MG
Part # DR-G3DE065-FL (pair) Part # DR-G3DE065-FL-SINGLE (single rail only)
NOTE: All measurements on center.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
103
DESIGNER DECK TOP DECK TO DECK RETURN STAIR RAIL:
PC TP
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness • Escutcheons & Mounting Hardware Included
MG
Part # DR-D3D50065-FL (see note)
*NOTE RAIL PLACEMENT: The forward deck flange (toward pool) must set back a minimum distance of 2.5” from the vertical pool wall.
RAIL PRODUCTS
NOTE: All measurements on center.
DECK TOP DESIGNER DECK TO DECK STAIR HANDRAIL:
PC TP
FEATURES: • 304 SS and 316L • 1.90” x .065” Wall Thickness • Escutcheons & Mounting Hardware Included
MG
Part # DR-D2D3.0065-FL (pair)
NOTE: This product sold as pairs. NOTE: All measurements on center.
104
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
GAMES & LIFESTYLE PRODUCTS
DESCRIPTION
PART NUMBER
Basketball Set - On Deck 12” Offset Complete B-Ball, SS Legs Basketball Set - In Deck 12” Offset Complete B-Ball, SS Legs, Bronze Anchor Basketball Set - In Deck 12” Offset Complete B-Ball, SS Legs, Plastic Anchor Basketball Set - On Deck 18” Offset Complete B-Ball, SS Legs Basketball Set - In Deck 18” Offset Complete B-Ball, SS Legs, Bronze Anchor Basketball Set - In Deck 18” Offset Complete B-Ball, SS Legs, Plastic Anchor Volleyball Set - On Deck Complete V-Ball, SS Legs Volleyball Set - In Deck Option #1 Complete V-Ball, SS Legs, Bronze Anchors Volleyball Set - In Deck Option #2 Complete V-Ball, SS Legs, Plastic Anchors
Part # SPS-BBALL D-C Part # SPS-BBALL GB-C Part # SPS-BBALL GP-C
SPS-BBALL D-C SPS-BBALL GB-C SPS-BBALL GP-C SPS-BBAL 18 D-C SPS-BBAL 18 GBC SPS-BBAL 18 GPC WS-V BALL D WS-VBALL GB-C WS-VBALL GP-C
Part # SPS-BBAL 18 D-C Part # SPS-BBAL 18 GBC Part # SPS-BBAL 18 GPC
GAMES FEATURES: • Removable Stainless Steel Posts • Anchor Socket Covers • Posts Can be Powder Coated or Thermo Plastic Coated to Coordinate With Custom Pool Rails • Comes With Ball, Pump, & Needle • Available for On Deck OR In Deck Installation Applications • Bronze OR Plastic Anchors Available • Available in 316L Marine Grade Option Check your local electrical code requirements for bonding requirements.
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering)
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) NOTE: On ALL coated rails for games, the bottom 6” of the stainless steel is NOT coated.
Part # WS-V BALL D
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
GAMES & LIFESTYLE
SPORTS EQUIPMENT
Part # WS-VBALL GB-C Part # WS-VBALL GP-C
TG - Rev. 7/15
105
BASKETBALL SET: FEATURES: • Removable Stainless Steel Posts (1.90 x .065 SS) • Anchor Socket Covers • Tough, Impact Resistant Polycarbonate Backboard • Posts Can be Powder Coated or Thermo Plastic Coated to Coordinate With Custom Pool Rails • Comes With Backboard, Support Legs, Anchors, Rim, Net, Ball, Pump, & Needle • Available for On Deck OR In Deck Installation Applications • 12” or 18” Set Back Available • Bronze OR Plastic Anchor Jig Available • Optional Upgrade: 316L Marine Grade SS
Part # SPS-BBALL D-C Part # SPS-BBALL GB-C Part # SPS-BBALL GP-C Part # SPS-BBAL 18 D-C Part # SPS-BBAL 18 GBC Part # SPS-BBAL 18 GPC
SPS-B ANC-BRONZE
SPS-B ANC-PLAS
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering)
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering)
VOLLEYBALL SET:
GAMES & LIFESTYLE
FEATURES: • Removable Stainless Steel Posts • Anchor Socket Covers • Durable 16’ Long x 3’ High Net With Black Twisted Polyethylene Material & White Vinyl Banding; NOTE: Ties Will Extend to 22’ • Posts Can be Powder Coated or Thermo Plastic Coated to Coordinate With Custom Pool Rails • Comes with Net, Ball, Pump, Needle, Support Legs & Anchors • Available for On Deck OR In Deck Installation Applications • Bronze OR Plastic Anchors Available • Optional Upgrade: 316L Marine Grade • NEW: Retrofit/Aftermarket Volleyball Set Available – Uses existing 1.50 umbrella anchors and our 1.50 Adapter*
Part # WS-V BALL D Part # WS-VBALL GB-C Part # WS-VBALL GP-C *Part # PL-V BALL D (Retrofit/Aftermarket)
Left Photo: WS-V ANC-BRONZE Right Photo: WS-V ANC-PLAS
CUSTOM POWDER COATED COLORS: White: -1; Black: -2; Earth: -3; Copper Vein: -4; Hammertone Gray: -6; Light Gray: -9 (add custom color code behind part # when ordering)
THERMO PLASTIC COLORS: White: -TPC-W; Gray: -TPC-G; Tan: -TPC-T (add custom color code behind part # when ordering) 106
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
GAMES & LIFESTYLE PRODUCTS
POOL/SPA TABLE & SEAT FOR GUNITE NEW CONSTRUCTION DESCRIPTION 30” Pool/Spa Table Complete Table, 54” SS Pole, Bronze Anchor 30” Pool/Spa Table w/o Anchor Complete Table, 54” SS Pole, No Anchor 30” Pool/Spa Table w/Cup Holders Complete Table, 54” SS Pole, Bronze Anchor 30” Pool/Spa Table w/Cup Holders w/o Anchor Complete Table, 54” SS Pole, No Anchor 16” Pool/Spa Seat Complete Seat, 42” SS Pole, Bronze Anchor 16” Pool/Spa Seat w/o Anchor Complete Seat, 42” SS Pole, No Anchor 6” Bronze Anchor 6” Bronze Anchor w/Cap Included
Part # WS-POOLSEAT-XX-C
PART NUMBER WS-POOLTABLE-XX-C WS-PT NO ANC-XX-C WS-POOLTABLE-CH-XX-C WS-PT NO ANC-CH-XX-C WS-POOLSEAT-XX-C WS-PS NOANC-XX-C WS-POOL-ANCHOR
PS TABLE & SEAT FEATURES: • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 16” Diameter Seat Top • 1.90 x .065 316L Support Pole • 6” Bronze Pool Anchor with Cap Included (also available without anchor) • Table Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Stainless Steel Hardware Included • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Tanning Ledge Tables Check your local electrical code requirements for bonding requirements.
Part # WS-POOL-ANCHOR PS TABLE & SEAT COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60
GAMES & LIFESTYLE
(replace XX w/custom color code in part # above)
Part # WS-POOLTABLE-XX-C
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
107
POOL/SPA TABLE & SEAT FOR GUNITE NEW CONSTRUCTION: POOL/SPA TABLE
Part # WS-POOLTABLE-XX-C Part # WS-POOLTABLE-CH-XX-C
Part # WS-PT NO ANC-XX-C Part # WS-PT NO ANC-CH-XX-C POOL/SPA SEAT
FEATURES: • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 16” Diameter Seat Top • 54” Tall 1.90 x .065 316L Support Pole for Table • 42” Tall 1.90 x .065 316L Support Pole for Seat • 6” Bronze Pool Anchor with Cap Included (also available without anchor) • Table Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Stainless Steel Hardware Included • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Tanning Ledge Tables PS TABLE & SEAT COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (replace XX w/custom color code in part #)
Part # WS-POOLSEAT-XX-C
Part # WS-PS NOANC-XX-C Part # WS-POOL-ANCHOR Pool/Spa Table
GAMES & LIFESTYLE
Pool/Spa Seat
108
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
TANNING LEDGE TABLES FOR NEW GUNITE CONSTRUCTION: 16” TABLE FEATURES: • 16” Diameter Table Top with Umbrella Hole • 18” Tall 1.90 x .065 316L Support Pole • Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Pool/Spa Table & Seat • For Use with Tanning Ledge up to 12” Deep
Part # WS-POOL-ANCHOR Part # WS-16 TABLE-XX-C Part # WS-16 NOANC-XX-C TANNING LEDGE TABLES COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (add custom color code behind part #)
TANNING LEDGE TABLES FOR NEW GUNITE CONSTRUCTION:
Part # WS-30 TABLE-XX-C (shown) Part # WS-30 NOANC-XX-C
Part # WS-30 TABLE-CH-XX-C Part # WS-30 NOANC-CH-XX-C
GAMES & LIFESTYLE
30” TABLE FEATURES: • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 18” Tall 1.90 x .065 316L Support Pole • Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Pool/Spa Table & Seat • For Use with Tanning Ledge up to 12” Deep
Part # WS-POOL-ANCHOR
TANNING LEDGE TABLES COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (add custom color code behind part #)
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
109
GAMES & LIFESTYLE PRODUCTS
TANNING LEDGE TABLES FOR GUNITE RETROFIT/AFTERMARKET PART NUMBER
DESCRIPTION 16” Beverage Table Complete Table, 18” SS Leg, 1.50” Adapter 30” Umbrella Table Complete Table, 18” SS Leg, 1.50” Adapter 30” Umbrella Table w/Cup Holders Complete Table, 18” SS Leg, 1.50” Adapter 1.50” Adapter Adapter for Use w/Existing 1.50” Anchors
PL-16 BEV TABLE-XX-C PL-30 UMB TABLE-XX-C PL-30 UMB TABLE-CH-XX-C PL-ADAPTER 1.50
TANNING LEDGE TABLES COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (replace XX w/custom color code in part # above)
TANNING LEDGE TABLE PRODUCTS FEATURES: • 16” Diameter Table Top with Umbrella Hole • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 18” Tall 1.90 x .065 316L Support Pole • 1.50” Adapter Included for Use with Existing 1.50” Anchors • Umbrella Table Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Pool/Spa Table & Seat Check your local electrical code requirements for bonding requirements. 30” Tanning Ledge Table w/Cup Holders
16” Tanning Ledge Table
IT’S AS EASY AS 1, 2, 3!
GAMES & LIFESTYLE
There are ...ADD a THOUSANDS RETROFIT/ of existing AFTERMARKET umbrella TANNING LEDGE sleeves... TABLE with our 1.50”
1.
anchor sleeve adapter in
3 EASY STEPS!
2.
3. 30” Tanning Ledge Table
110
TG - Rev. 7/15
To view our products online
CLICK 8
Umbrellas and umbrella anchors not included.
w w w. i n t e r - f a b . c o m
RETROFIT/AFTERMARKET TANNING LEDGE 16” DIAMETER TABLE: 16” TABLE FEATURES: • 16” Diameter Table Top with Umbrella Hole • 18” Tall 1.90 x .065 316L Support Pole • 1.50” Adapter Included for Use with Existing Plastic 1.50” Umbrella Sleeves • Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Pool/Spa Table & Seat • For Use with Tanning Ledge up to 18” Deep
Part # PL-16 BEV TABLE TANNING LEDGE TABLES COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (add custom color code behind part #)
RETROFIT/AFTERMARKET TANNING LEDGE 30” DIAMETER TABLE:
GAMES & LIFESTYLE
30” TABLE FEATURES: • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 18” Tall 1.90 x .065 316L Support Pole • 1.50” Adapter Included for Use with Existing Plastic 1.50” Umbrella Sleeves • Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Pool/Spa Table & Seat • For Use with Tanning Ledge up to 18” Deep
Part # PL-30 UMB TABLE (shown) Part # PL-30 UMB TABLE-CH TANNING LEDGE TABLES COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (add custom color code behind part #)
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
111
GAMES & LIFESTYLE PRODUCTS
POOL/SPA TABLE & SEAT FOR VINYL LINER NEW CONSTRUCTION DESCRIPTION 30” Pool/Spa Table Complete Table, 54” SS Pole, Vinyl Liner Anchor 30” Pool/Spa Table w/o Anchor Complete Table, 54” SS Pole, No Anchor 30” Pool/Spa Table w/Cup Holders Complete Table, 54” SS Pole, Vinyl Liner Anchor 30” Pool/Spa Table w/Cup Holders w/o Anchor Complete Table, 54” SS Pole, No Anchor 16” Pool/Spa Seat Complete Seat, 42” SS Pole, Vinyl Liner Anchor 16” Pool/Spa Seat w/o Anchor Complete Seat, 42” SS Pole, No Anchor Vinyl Liner Anchor Complete Seat, 42” SS Pole, No Anchor
Part # VL-POOLSEAT
PART NUMBER VL-POOLTABLE-XX-C VL-PT NO ANC-XX-C VL-POOLTABLE-CH-XX-C VL-PT NO ANC-CH-XX-C VL-POOLSEAT-XX-C VL-PS NOANC-XX-C VL-ANCHOR 1.90
TABLE & SEAT FEATURES: • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 16” Diameter Seat Top • 1.90 x .065 316L Support Pole • 1.90 Vinyl Liner Anchor with Cap Included (also available without anchor) • Table Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Stainless Steel Hardware Included • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Tanning Ledge Tables Check your local electrical code requirements for bonding requirements. Part # VL-ANCHOR 1.90 PS TABLE & SEAT COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (replace XX w/custom color code in part # above)
GAMES & LIFESTYLE Part # VL-POOLTABLE
112
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
POOL/SPA TABLE & SEAT FOR VINYL LINER NEW CONSTRUCTION: POOL/SPA TABLE
Part # VL-POOLTABLE-XX-C Part # VL-POOLTABLE-CH-XX-C
Part # VL-PT NO ANC-XX-C Part # VL-PT NO ANC-CH-XX-C POOL/SPA SEAT
FEATURES: • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 16” Diameter Seat Top • 54” Tall 1.90 x .065 316L Support Pole for Table • 42” Tall 1.90 x .065 316L Support Pole for Seat • 1.90 Vinyl Liner Anchor with Cap Included (also available without anchor) • Table Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Stainless Steel Hardware Included • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Tanning Ledge Tables PS TABLE & SEAT COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (replace XX w/custom color code in part #)
Part # VL-POOLSEAT-XX-C
Part # VL-PS NOANC-XX-C Part # VL-ANCHOR 1.90
GAMES & LIFESTYLE
Pool/Spa Table
Pool/Spa Seat
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
113
16” TANNING LEDGE TABLE FOR VINYL LINER NEW CONSTRUCTION: 16” TABLE FEATURES: • 16” Diameter Table Top with Umbrella Hole • 18” Tall 1.90 x .065 316L Support Pole • 1.90 Vinyl Liner Anchor with Cap Included (also available without anchor) • Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Pool/Spa Table & Seat
Part # VL-ANCHOR 1.90 Part # VL-16 TABLE-XX-C Part # VL-16 NOANC-XX-C TANNING LEDGE TABLES COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (add custom color code behind part #)
30” TANNING LEDGE TABLE FOR VINYL LINER NEW CONSTRUCTION:
GAMES & LIFESTYLE
30” TABLE FEATURES: • 30” Diameter Table Top with Umbrella Hole (available with or without 4 cup holders) • 18” Tall 1.90 x .065 316L Support Pole • 1.90 Vinyl Liner Anchor with Cap Included (also available without anchor) • Works With Most Outdoor Umbrellas (Max. 1-5/8”) • Variety of Earth Tone and Granite Colors Available • Advanced High-Tech RTM Manufacturing • Matching Products: T7 Diving System, BYOS 1& 2, GRS, Pool/Spa Table & Seat
Part # VL-30 TABLE-XX-C (shown) Part # VL-30 NOANC-XX-C
Part # VL-30 TABLE-CH-XX-C Part # VL-30 NOANC-CH-XX-C
Part # VL-ANCHOR 1.90
TANNING LEDGE TABLES COLORS AVAILABLE: Tan: -51; Gray: -52; Summit Gray: -53; Mont Blanc: -54; Pebble: -55; Fashion Gray: -56; Cappuccino: -57; Autumn Sun: -58; Safari Sunrise: -59; Starry Night: -60 (add custom color code behind part #)
114
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
ECHOES OF NATURE ACCESSORIES - QUICK REFERENCE
BOULDER SPRINGS PRODUCTS Water Features Alta (waterfall only) Alta (waterfall, pump & plumbing) Keystone (waterfall only) Keystone (waterfall, pump & plumbing) Taos (waterfall only) Taos (waterfall, pump & plumbing) Aspen (waterfall only) Aspen (waterfall, pump & plumbing) Vail (waterfall only) Vail (waterfall only) Rim Rock (waterfall only) Rim Rock (waterfall, pump & plumbing) WOK (waterfall w/small pedestal) WOK (waterfall w/medium pedestal) Boulder Springs Jump & Splash Accent Boulders Accent Boulder 1100 Accent Boulder 1200 Accent Boulder 1300 Accent Boulder 1400 Accent Boulder 1500 Accent Boulder 2200 Accent Boulder 2300 Accent Boulder 2600 Accent Boulder 2650 Boulder Pack 8100 (pair w/4100) Boulder Pack 8200 (pair w/4200) Boulder Pack 8300 (pair w/4300) Boulder Pack 8400 (pair w/4400) Boulder Pack 8500 (pair w/4500) Rim Rock Accent Rock (not pictured)
SIZE DIMENSIONS (Length, Height, Depth)
PART NUMBER
Length = 37”, Height = 15”, Depth = 27” Length = 37”, Height = 15”, Depth = 27” Length = 39”, Height = 22”, Depth = 38” Length = 39”, Height = 22”, Depth = 38” Length = 57”, Height = 20”, Depth = 44” Length = 57”, Height = 20”, Depth = 44” Length = 87”, Height = 33”, Depth = 33” Length = 87”, Height = 33”, Depth = 33” Length = 85”, Height = 26”, Depth = 58” Length = 85”, Height = 26”, Depth = 58” Length = 62”, Height = 12”, Depth = 33” Length = 77”, Height = 12”, Depth = 49” Fountain: Diameter = 36”, Height = 6” Short Pedestal: Height = 6” Fountain: Diameter = 36”, Height = 6” Medium Pedestal: Height = 15” Length = 38”, Height = 13”, Depth = 33”
#4100 #4100T #4200 #4200T #4300 #4300T #4400 #4400T #4500 #4500T #R-ROCK-1-POOL #R-ROCK-1-POND #WOK-SPILL-S
Length = 31”, Height = 8”, Depth = 19” Length = 38”, Height = 11”, Depth = 20” Length = 36”, Height = 16”, Depth = 24” Length = 56”, Height = 15”, Depth = 40” Length = 46”, Height = 21”, Depth = 36” Length = 29”, Height = 21”, Depth = 20” Length = 49”, Height = 18”, Depth = 19” Length = 39”, Height = 8”, Depth = 23” Length = 34”, Height = 21”, Depth = 26” (Reference 1200 Boulder & 1300 Boulder) (Reference 1200 Boulder & 2200 Boulder) (Reference 1200 Boulder & 2300 Boulder) (Reference 2300, 2600 & 2650 Boulders) (Reference 1500, 2200 & 2650 Boulders) Length = 45”, Height = 11”, Depth = 28”
#1100 #1200 #1300 #1400 #1500 #2200 #2300 #2600 #2650 #8100 #8200 #8300 #8400 #8500 #R-ROCK-1-ACC
F E AT U R E S : • Durable, Rugged & Light Weight Polyurea Construction • Suggested for Pool, Pond or Spa Applications • Many Designs Molded from Actual Rock Outcroppings • Available in 4 Colors; Hues May Vary • WOK Products Available in 1 Exclusive WOK Color • Color is Chemically Bonded to Undercoat
ECHOES OF NATURE
Part # 4100
Part # 1100
Part # 4200
Part # 1200
Part # 4300
Part # 1300
Part # 4400
Part # 1400
#WOK-SPILL-M #BS-SR
NOTE: All sizes +/- 2”. Please check website for most current sizes and weights.
BOULDER SPRINGS ROCK COLORS = Light Granite: -22; Sunset Red: -23; Dark Granite: -28; Rustic Sandstone: -29 (add custom color code behind part # when ordering) WOK ROCK COLOR ONLY = True Copper: -32 (add custom color code behind part # when ordering)
Part # 4500
Part # 1500
16 SEE PG. HING TC FOR MA BASE! G N I DIV
Part # WOK-SPILL-S (shown)
Part # 2200
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
Part # 2300
Part # BS-SR
Part # R-ROCK-1-POOL
Part # 2600
TG - Rev. 7/15
Part # 2650
115
ECHOES OF NATURE
DESCRIPTION
ECHOES OF NATURE ACCESSORIES - QUICK REFERENCE
EDGESTONE SERIES PRODUCTS DESCRIPTION Water Features Scupper Planter/Bubbler Double Bubbler Unity Waterfall Trinity Falls Edgestone Jump & Splash Accessories Umbrella Stand
SIZE DIMENSIONS (Length, Height, Depth)
PART NUMBER
Length = 38”, Height = 20”, Depth = 24” Length = 38”, Height = 20”, Depth = 19” Length = 38”, Height = 20”, Depth = 19” Length = 23”, Height = 26”, Depth = 25” Length = 91”, Height = 24”, Depth = 23” Length = 38”, Height = 18”, Depth = 20”
#7500 #7525 #7550 #7585 #7600 #7800
Length = 38”, Height = 24”, Depth = 19”
#7575
F E AT U R E S : • Durable, Rugged & Light Weight Polyurea Construction • Suggested for Pool, Pond or Spa Applications • Available in 2 Colors; Hues May Vary • Color is Chemically Bonded to Undercoat
NOTE: All sizes +/- 2”. Please check website for most current sizes and weights.
EDGESTONE SERIES ROCK COLORS = Graystone: -33; Brownstone: -34 (add custom color code behind part # when ordering)
Part # 7500
Part # 7525
Part # 7550
Part # 7585
Part # 7600
Part # 7800
ECHOES OF NATURE
& G SLIDE SE! N I H C T BA MA 40 FOR CHING DIVING . G P E E T S FOR MA PG. 17
Part # 7575
116
TG - Rev. 7/15
To view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
PAVER KIT INFO – SELECTED DIVING PRODUCTS When installing an Inter-Fab diving board and base set up using a paver kit, you must ensure that all standard requirements for a diving board and base installation are met. The diving board and base set up must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011 requirements must be met. Figure 1 illustrates the standard minimum concrete pad recommended for all Inter-Fab diving board and base set ups, which is 4’ wide x 8’ long x 6” deep.
Refer to Figure 3 to determine how much of the jig needs to be exposed above the final deck surface. You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation. Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning. Recommended Minimum Concrete Area for Diving Bases – PLAN VIEW –
Example of a Paver Jig in Relationship to Concrete Pad – SIDE VIEW – HEIGHT ABOVE FINAL DECK SURFACE See Figure 3 Below
48” (4’)
96” (8’)
The minimum concrete depth shall be 6” for the diving base concrete pad.
3” max.
PAVERS Layer of setting material to secure pavers to concrete.
CONCRETE
Pool Edge
CONCRETE
Minimum jig depth is either 3.5” or 4.5”. See Figure 3.
SOIL
Drawing Not To Scale
Fig. 1
INTER-FAB DIVING BASE LA MESA BASE / LOS ARCOS BASE – WITH 8’ JIG – WITH 10’ JIG DURO-SPRING BASE TECHNI-SPRING STEEL / EDGE BASE TECHNI-SPRING FIBERGLASS BASE BAJA BASE – WITH 8’ JIG CITY BASE T7-N BASE (3 BOLT JIG)
6” min.
DIVING BASE JIG
Fig. 2
MIN. JIG PAVER JIG DEPTH PART NUMBER 3.5” 3.5” 3.5” 4.5” 4.5” 4.5” 4.5” 4.5” 3.5” 4.5”
LM-J6 PAVER LM-J8 PAVER LM-J10 PAVER DS-J PAVER TS-EDGE-J PAVER TSF-J PAVER BA-J6 PAVER BA-J8 PAVER CITY-J6 PAVER T7-NJIG PAVER
PAVER JIG BOLTS 1/2” X 8” Carriage SS 1/2” X 8” Carriage SS 1/2” X 8” Carriage SS 5/8” X 10” Hex Head SS 1/2” X 10” Hex Head SS 1/2” X 12” Hex Head SS 1/2” X 10” Hex Head SS 1/2” X 10” Hex Head SS 1/2” X 8” Carriage SS 1/2” X 10” Hex Head SS
HEIGHT ABOVE FINAL DECK SURFACE 1.5” 1.5” 1.5” 1.5” 1.5” 3.5” 1.5” 1.5” 1.5” 2.0”
Fig. 3
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
117
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Figure 2 shows an example side view of a paver jig used in a paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”.
INTENDED USE INSTRUCTIONS - DIVING PRODUCTS Inter-Fab diving boards (including spring boards, jump boards and starting platforms) and stands shall be installed only by a professional swimming pool contractor or with the direct supervision of a licensed professional, engineer or architect. Diving boards may be installed only on residential inground swimming pools properly designed for their use. Diving boards that are improperly installed can be very dangerous to the user resulting in possible serious head and/or spinal column injury, including the paralysis or death of the user. It is very important that Inter-Fab diving boards and stands be installed only on Type 1 or greater pools build in strict accordance with the American National Standard for Residential Inground Swimming Pools (ANSI/APSP/ICC-5 2011) and in accordance with the included INTER-FAB RESIDENTIAL POOL SPECIFICATIONS TABLE 2. PRODUCT REFERENCE PAGES/TECHNICAL INFO
In addition to the above standard and referenced table, the installation instructions provided by Inter-Fab, Inc. must be diligently followed. It is also important that any and all warnings provided with the diving board be strictly adhered to and posted in a conspicuous location. If not provided or they are misplaced, please purchase warning signs from your pool contractor or professional pool supply store and post them in a location that the users of the diving board can clearly see.
ONLY ONE PERSON ON THE DIVING BOARD AT ONE TIME. REFER TO THE POOL TYPE APPLICATIONS AND MAXIMUM WEIGHT LIMIT PROVIDED IN THE CORRESPONDING INSTALLATION MANUAL. Plan Your Dive
PLAN YOUR DIVE, STEER UP
Back Arched
Arms Extended
Head and Hands Up Hold Diving Form
Steer up for a safe dive.
DIVING TIPS: Even the safest equipment must be used properly. Inter-Fab promotes safe diving by offering these tips on the proper use of your diving board: always dive into water that meets depth requirements, with arms extended; be aware of the bottom and the walls of the pool; avoid collisions with pool toys and floats; and instruct your pool users to always “steer up”. When you begin your dive you must get ready to steer up. As you enter the water, your arms must be extended over your head, hands flat aiming up. Hold your head and arch your back.
118
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
(WOOD CORE BOARDS) :
PRODUCT REFERENCE PAGES/TECHNICAL INFO
HOLE DRILL PATTERNS
HOLE PATTERNS FOR WOOD CORE BOARDS: • 2 Hole Drill Pattern - available on Duro-Beam 6’, 8’ & 10’ Techni-Beam 6’, 8’, 10’ & 12’ Olympian 6’, 8’ & 10’ Commercial 10’, 12’, 14’ & 16’
• 3 Hole Drill Pattern - available on Duro-Spring 6’ & 8’ • 4 Hole Drill Pattern - available on Baja Jump Board 6’ & 8’ • Custom Drill Pattern Available
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
119
DIVING BOARD CUSTOM DRILL PATTERN DIMENSION FORM Please provide the necessary dimensions needed to make the requested custom drill pattern. Custom drilled boards are non-returnable and carry the same 3 year warranty as Inter-Fab’s standard products. Pool Professional: Fax this to your wholesale distributor. Wholesale Distribution Only: Fax to Inter-Fab, Inc. Diving Board Department. PLEASE CHECK REQUESTED HOLE PATTERN: _____2 Hole Board** _____3 Hole Board _____4 Hole Board
________ A = Length of Board ________ B = Measurement of Front Holes on Center PRODUCT REFERENCE PAGES/TECHNICAL INFO
________ C = Measurement of Back Holes on Center ________ D = Measurement of Back Holes to Back End of Board ________ F = Measurement Between Back Holes and Front Holes on Center **For a Custom 2 Hole Board - you will need to provide measurements A, C and D only. F
3 HOLE BOARD
C
A
D 4 HOLE BOARD
B
Customer Signature_________________________________________________
Date___________________________
Inter-Fab Inc. 3050 S. Alvernon Way • Tucson, AZ 85713 • 800.737.5386 • 520.790.7127 FAX
120
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
CURRENT DIVING BOARDS Model #
A
B
C
D
F
DIA.
70.50” 70.50” 94.50” 118.50” 142.50”
17.25” 17.25” 17.25” 17.25” 17.25”
10.00” 12.00” 12.00” 12.00” 12.00”
4.00” 4.00” 4.00” 4.00” 4.00”
30.00” 30.00” 40.00” 52.00” 62.00”
19/32” 19/32” 19/32” 19/32” 19/32”
118.50” 142.50” 166.50” 190.50” 96.00” 120.00” 144.00” 168.00” 192.00”
17.25” 17.25” 19.25” 19.25” 18.00” 18.00” 18.00” 20.00” 18.00”
12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00”
4.00” 4.00” 4.00” 4.00” 4.00” 4.00” 4.00” 4.00” 4.00”
52.00” 62.00” 74.00” 86.00” 40.00” 52.00” 62.00” 74.00” 86.00”
19/32” 19/32” 19/32” 19/32” 19/32” 19/32” 19/32” 19/32” 19/32”
Residential Pool Boards
6’ Frontier II 6’ Fibre-Dive & Glas-Hide 8’ Fibre-Dive & Glas-Hide 10’ Fibre-Dive & Glas-Hide 12’ Fibre-Dive & Glas-Hide Public Pool Boards
10’ Commercial 12’ Commercial 14’ Commercial & Eureka 16’ Commercial & Eureka 8’ Aluminum 10’ Aluminum 12’ Aluminum 14’ Aluminum 16’ Aluminum
OBSOLETE DIVING BOARDS Model #
A
B
C
D
AB-6F AB-8 AB-10 AB-12 ABO-XII ABO-XIV ABO-XVI
6’ 8’ 10’ 12’ 12’ 14’ 16’
16.00” 18.00” 18.00” 18.00” 20.00” 20.00” 20.00”
10.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00”
3.00” 4.00” 4.00” 4.00” 4.00” 4.00” 4.00”
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
121
PRODUCT REFERENCE PAGES/TECHNICAL INFO
OTHER MANUFACTURER’S TWO-HOLE DIVING BOARD DIMENSIONS
OTHER MANUFACTURER’S THREE-HOLE DIVING BOARD DIMENSIONS
PRODUCT REFERENCE PAGES/TECHNICAL INFO
CURRENT JUMP BOARDS Model #
A
B
C
D
F
DIA.
6’ Anthony 8’ Anthony 6’ Frontier II 8’ Frontier II
70.50” 94.50” 70.50” 94.50”
17.25” 17.25” 17.25” 17.25”
12.00” 12.00” 4.50” 4.50”
3.25” 3.25” 8.00” 14.00”
20.50” 30.50” 30.00” 36.00”
19/32” 19/32” 19/32” 19/32”
A
B
C
D
F
DIA.
70.50” 70.50” 94.50” 4.5’ 6’ 8’ 4’ 6’ 8’ 4’ 6’ 8’ 4’ 6’ 8’ 6’ 8’ 6’ 8’ 6’ 8’ 6’ 8’
17.25” 17.25” 17.25” 16.00” 16.00” 18.00” 16.00” 16.00” 18.00” 16.00” 16.00” 18.00” 16.00” 16.00” 18.00” 16.00” 18.00” 16.00” 18.00” 16.00” 18.00” 16.00” 18.00”
12.00” 12.00” 12.00” 4.50” 4.50” 4.50” 4.50” 4.50” 4.50” 10.00” 10.00” 10.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00”
12.00” 12.00” 12.00” 3.50” 8.00” 14.50” 4.50” 8.00” 14.50” 3.00” 4.00” 4.00” 4.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00” 6.00” 6.00”
15.00” 18.00” 30.00” 27.00” 30.00” 36.00” 16.00” 30.00” 36.00” 16.00” 30.00” 36.00” 16.00” 15.00” 29.50” 15.00” 29.50” 15.00” 29.50” 15.00” 29.50” 20.50” 30.50”
19/32” 19/32” 19/32”
OBSOLETE JUMP BOARDS Model # 6’ Pioneer 6’ Frontier 8’ Frontier ASB-40-3-1 ASB-60-3-1 ASB-80-3-1 ACB-4 ACB-6 ACB-8 ACB-50M-4 ACB-50M-6 ACB-50M-8 KKJ-40/50M-4 KKJ-40/50M-6 KKJ-50M-8 Marine 6’ Marine 8’ 6’ Continental Single Spring 8’ Continental Single Spring 6’ DBS Single Spring 8’ DBS Single Spring 6’ Anthony Single Spring 8’ Anthony Single Spring
122
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
CURRENT JUMP BOARDS Model # 6’ Baja 8’ Baja
A
B
C
D
E
F
DIA.
70.50” 94.50”
17.25” 17.25”
12.00” 12.00”
12.00” 12.00”
7.00” 7.00”
15.00” 26.00”
7/16” 7/16”
A
B
C
D
E
F
DIA.
46.50” 70.50” 94.50” 94.50” 4’ 6’ 8’ 6’ 8’ 6’ 8’ 6’ 8’
17.25” 17.25” 17.25” 17.25” 16.00” 16.00” 18.00” 16.00” 18.00” 16.00” 18.00” 18.00” 18.00”
12.00” 12.00” 12.00” 12.00” 4.50” 4.50” 4.50” 12.00” 12.00” 12.00” 12.00” 12.00” 12.00”
12.00” 12.00” 20.00” 10.00” 3.50” 8.00” 12.00” 6.00” 6.00” 6.00” 6.00” 8.00” 12.00”
7.00” 12.00” 12.00” 12.00” 4.50” 4.50” 4.50” 10.50” 10.50” 10.50” 10.50” 12.00” 12.00”
7.00” 30.50” 30.50” 20.00” 27.00” 30.00” 36.00” 24.00” 36.00” 24.00” 36.00” 30.00” 36.00”
7/16” 19/32” 19/32” 19/32”
OBSOLETE JUMP BOARDS Model # 4’ Baja 6’ Space Maker 8’ Space Maker Gazelle ASB-40-3 ASB-60-3 ASB-80-3-1 6’ DBS Double Spring 8’ DBS Double Spring 6’ Swimline Double Spring 8’ Swimline Double Spring 6’ Old Style Double Spring 8’ Old Style Double Spring
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
123
PRODUCT REFERENCE PAGES/TECHNICAL INFO
OTHER MANUFACTURER’S FOUR-HOLE DIVING BOARD DIMENSIONS
OTHER MANUFACTURER’S JIG INFORMATION THREE-BOLT
Jig Type
PRODUCT REFERENCE PAGES/TECHNICAL INFO
6’ Flyte Deck 8’ Flyte Deck 10’ Flyte Deck New 8’ Flyte Deck 6’ & 8’ Frontier II Spring ** 4’ Cobra Coil ** 6’ Cobra Coil ** 8’ Cobra Coil ** 4’ Aqua Coil
Jig Part #
A
B
BOLT
71-209-700 71-209-702 71-209-703 71-209-704 69-209-227 67-521-10 67-521-10 67-521-10 02-946-11
6.50” 6.50” 6.50” 6.50” 3.25” 18.00” 18.00” 18.00” 4.50”
14.00” 22.00” 31.00” 24.00” 6.00” 16.00” 30.00” 36.00” 16.00”
1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 5/8” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage
** OBSOLETE JIG
FOUR-BOLT
Jig Type
Jig Part #
A
B
BOLT
69-209-006 69-209-007 69-209-229 69-209-224 69-209-225 69-209-226 67-971-10 67-971-11
12.00” 14.00” 6.00” 5.00” 5.00” 6.00” 8.00” 15.00”
12.00” 14.00” 12.00” 6.00” 12.00” 26.50” 12.00” 15.00”
1/2” x 6” Carriage 1/2” x 7” Carriage 5/8” x 6” Carriage 1/2” x 7” Carriage 1/2” x 7” Carriage 1/2” x 7” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage
606/608 Steel 606-F ** 6’ x 8” Frontier II Steel Pedestal ** 6’ Frontier II Fiberglass 8’ Frontier II Fiberglass ** 10’ Frontier II Fiberglass ** AJ-6’ & AJ-8’ CPB or DPB ** AJ6’-FB ** OBSOLETE JIG
FIVE-BOLT
Jig Type
Jig Part #
A
B
C
BOLT
6’ Chevron 8’ Chevron 10’ Chevron
71-209-726 71-209-728 71-209-730
4.00” 4.00” 4.00”
5.00” 5.00” 5.00”
14.00” 22.00” 27.00”
1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage
124
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
OTHER MANUFACTURER’S JIG INFORMATION
Jig Type ** 4’ Baja 6’ Baja 8’ Baja Steel Meter ** 6’ Frontier ** 6’ Pioneer ** Frontier & Pioneer
Jig Part #
A
B
C
D
E
BOLT
69-209-698 69-209-699 69-209-700 71-209-541 69-209-676
6.50” 6.50” 6.50” 4.00” 6.50” 6.50” 6.50”
6.50” 6.50” 6.50” 6.50” 6.50” 8.00” 6.50”
8.50” 8.50” 8.50” 10.00” 6.50” 6.50” 6.50”
6.50” 6.50” 6.50” 3.00” 6.50” 6.50” 6.50”
9.00” 16.75” 27.25” 17.00” 17.50” 15.50” 29.50”
1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 5-1/2” Carriage 1/2” x 6” Carriage
69-209-678
** OBSOLETE JIG
FIVE-BOLT
Jig Type KKJ-4OM-4
Jig Part #
A
B
C
BOLT
67-550-11
6.50”
6.50”
7.50”
1/2” x 5” Carriage
SIX-BOLT
Jig Type ** ADFC-50M-8F ** ADFC-50-10F ** ADFC-66M-1012F ** ADC-50M-8 ** ADC-50M-810 ** ADC-75M-1012 ** ADC-100M-1012
Jig Part #
A
B
C
D
BOLT
02-970-11 02-970-11 02-970-11 02-971-10 02-971-10 02-971-10 02-971-10
4.00” 4.00” 4.00” 4.00” 4.00” 4.00” 4.00”
15.50” 15.50” 15.50” 15.50” 15.50” 15.50” 15.50”
4.00” 4.00” 4.00” 4.00” 4.00” 4.00” 4.00”
4.25” 4.25” 4.25” 4.25” 4.25” 4.25” 4.25”
1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage 1/2” x 6” Carriage
** OBSOLETE JIG
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
125
PRODUCT REFERENCE PAGES/TECHNICAL INFO
SIX-BOLT
MINIMUM DIVING WATER ENVELOPE: NOTE: DRAWINGS ARE NOT TO SCALE. F
G
DIVING EQUIPMENT
H
J
PRODUCT REFERENCE PAGES/TECHNICAL INFO
TIP OF BOARD ABOVE POINT A
N
DIVING EQUIPMENT
M
K
L
TABLE 1 - MINIMUM WATER ENVELOPE (ANSI/APSP/ICC-5 2011) POOL TYPE
MINIMUM DEPTHS AT POINT
MINIMUM WIDTHS AT POINT
A
B
C
6’-0”
7’-6”
5’-0”
A
B
2’-9”
10’-0” 12’-0” 10’-0”
8’-0”
1’-6”
7’-0”
7’-6”
II
6’-0”
7’-6”
5’-0”
2’-9”
12’-0” 15’-0” 12’-0”
8’-0”
1’-6”
7’-0”
III
6’-10”
8’-0”
5’-0”
2’-9”
12’-0” 15’-0” 12’-0”
8’-0”
2’-0”
7’-6”
IV
7’-8”
8’-6”
5’-0”
2’-9”
15’-0” 18’-0” 15’-0”
9’-0”
2’-6”
V
8’-6”
9’-0”
5’-0”
2’-9”
15’-0” 18’-0” 15’-0”
9’-0”
3’-0”
DIVING
0 I
D
C
MINIMUM LENGTHS BETWEEN POINTS D
WA+/-3”
EQUIPMENT
AB
BC
CD*
DE
WE
VARIES
6’-0”
28’-9”
7’-6”
VARIES
6’-0”
28’-9”
9’-0”
VARIES
6’-0”
31’-3”
8’-0”
10’-6”
VARIES
6’-0”
33’-9”
9’-0”
12’-0”
VARIES
6’-0”
36’-9”
PROHIBITED
NOTES:
TABLE 2 - INTER-FAB RESIDENTIAL POOL MINIMUM SPECIFICATIONS POOL TYPE
MAX. DIVING BOARD LENGTH
MAX. HEIGHT OVER WATER AT POINT A
DBL**
HOW**
CROSS SECTIONAL DIMENSIONS AT POINT A
F
DIVING
0
G
N
MIN. HEAD ROOM ABOVE DIVING SURFACES
CROSS SECTIONAL DIMENSIONS AT POINT B H
J
EQUIPMENT
K
L
M
PROHIBITED
I
6’ DB/6’ JB/7’ T7
20”
2’-9”
5’-0”
4’-0”
7’-2.5”
7’-6”
6’-0”
3’-9”
2’-1.5”
12’
II
8’ DB/6’ JB/7’ T7
20”
2’-9”
3’-10”
4’-2”
7’-2.5”
7’-6”
6’-8”
3’-9”
2’-1.5”
12’
III
10’ DB/8’ JB/7’ T7
26”
2’-9”
4’-4.75”
4’-4.5”
7’-5.5”
8’-0”
6’-7”
3’-11.5”
1’-7.5”
13’
IV
10’ DB/8’ JB/7’ T7
30”
2’-9”
5’-10.5”
3’-10”
7’-8”
8’-6”
8’-3”
5’-7”
2’-7”
13’
V
12’ DB/8’ JB/7’ T7
40”
2’-9”
6’-2”
3’-11.5”
7’-9.5”
9’-0”
8’-2.5”
5’-9”
2’-7”
14’
*Min. length between points CD may vary based upon water depth at point D and the slope between points C & D ABBREVIATIONS: **DBL=Diving Board Length; DB=Diving Board; JB=Jump Board; **HOW=Height Over Water
126
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
SUPPORT INFORMATION:
ARTICLE 5 – POOL DIMENSIONS AND TOLERANCES Extracted from ANSI/APSP/ICC-5 2011, American National Standard for Residential Inground Swimming Pools
PRODUCT REFERENCE PAGES/TECHNICAL INFO
To obtain complete copies of the ANSI/APSP/ICC-5 2011 Standard for Residential Inground Pools contact:
The Association of Pool & Spa Professionals (APSP) 2111 Eisenhower Ave. Alexandria, VA 22314 (703) 838-0083
or visit: APSP.org
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
127
SUPPORT INFORMATION:
ARTICLE 5 – POOL DIMENSIONS AND TOLERANCES Extracted from ANSI/APSP/ICC-5 2011, American National Standard for Residential Inground Swimming Pools
PRODUCT REFERENCE PAGES/TECHNICAL INFO 128
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
SUPPORT INFORMATION:
PRODUCT REFERENCE PAGES/TECHNICAL INFO
ARTICLE 5 – POOL DIMENSIONS AND TOLERANCES Extracted from ANSI/APSP/ICC-5 2011, American National Standard for Residential Inground Swimming Pools
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
129
SUPPORT INFORMATION:
ARTICLE 5 – POOL DIMENSIONS AND TOLERANCES Extracted from ANSI/APSP/ICC-5 2011, American National Standard for Residential Inground Swimming Pools
PRODUCT REFERENCE PAGES/TECHNICAL INFO 130
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
ZOOMERANG™ WATER SAFETY ENVELOPE: A minimum water depth of three feet (3') under the exit of the slide which increases to a depth of three feet six inches (3'6") at point A which is located four feet six inches (4'6") from the back wall of the pool. A minimum depth of three feet six inches (3'6") must be maintained at a distance of three feet six inches (3'6”) along the centerline of the slide from point A. The above described water depth profile shall extend a minimum of three feet (3') on either side of the centerline of the slide. (See Diagrams A, B & C)
6'
2'6"
DIAGRAM B (NOT TO SCALE)
Minimum Slide Clearance Area
DIAGRAM C (NOT TO SCALE)
Minimum Water Safety Envelope
Water Level 3'6"
20" Max Point A
3'6”
8'
Level Deck
3'
3'6" 4'6"
ALL SLIDES SHOULD BE BONDED Check your local electrical code requirements.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
131
PRODUCT REFERENCE PAGES/TECHNICAL INFO
" 4'6
WATER SAFETY ENVELOPE
8'
C/L
3'
EN
TE R
20" Max
C
8'
(NOT TO SCALE)
3'
3'6"
3'
6'
DIAGRAM A
WHITE WATER™, WILD RIDE™, X-STREAM 2™, CITY 2™ SLIDE WATER SAFETY ENVELOPE: A minimum water depth of three feet (3') under the exit of the slide which increases to a depth of four feet (4') at point A which is located four feet six inches (4'6") from the back wall of the pool. A minimum depth of four feet (4') must be maintained at a distance of nine feet (9') along the centerline of the slide from point A. The above described water depth profile shall extend a minimum of three feet three inches (3'3") on either side of the centerline of the slide. (See Diagrams A, B & C)
C/L
4'6
"
3'
EN
TE R
20" Max
13
'6"
C
13'6"
(NOT TO SCALE)
3'3"
4'
PRODUCT REFERENCE PAGES/TECHNICAL INFO
3'3"
6'6"
DIAGRAM A
6'6"
2'6"
WATER SAFETY ENVELOPE
DIAGRAM B (NOT TO SCALE)
Minimum Slide Clearance Area
DIAGRAM C (NOT TO SCALE)
Minimum Water Safety Envelope 20" Max
Water Level 4'
Point A 9'
132
TG - Rev. 7/15
15˚
13'6"
Level Deck
3'
4' 4'6"
to view our products online
ALL SLIDES SHOULD BE BONDED Check your local electrical code requirements. CLICK 8
w w w. i n t e r - f a b . c o m
G-FORCE 2™ AND ADRENALINE™ SLIDES WATER SAFETY ENVELOPE:
DIAGRAM A
A minimum water depth of three feet (3') under the exit of the slide which increases to a depth of four feet (4'6") at point A which is located four feet six inches (4'6") from the back wall of the pool. A minimum depth of four feet (4'6") must be maintained at a distance of nine feet (9') along the centerline of the slide from point A. The above described water depth profile shall extend a minimum of three feet three inches (3'3") on either side of the centerline of the slide. (See Diagrams A, B & C)
PRODUCT REFERENCE PAGES/TECHNICAL INFO
(NOT TO SCALE)
DIAGRAM B (NOT TO SCALE)
Minimum Slide Clearance Area
DIAGRAM C (NOT TO SCALE)
Minimum Water Safety Envelope
ALL SLIDES SHOULD BE BONDED Check your local electrical code requirements. 8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
133
BYOS 1™ AND BYOS 2™ SLIDES WATER SAFETY ENVELOPE:
DIAGRAM A
A minimum water depth of three feet (3') under the exit of the slide which increases to a depth of four feet (4') at point A which is located four feet six inches (4'6") from the back wall of the pool. A minimum depth of four feet (4') must be maintained at a distance of nine feet (9') along the centerline of the slide from point A. The above described water depth profile shall extend a minimum of three feet three inches (3'3") on either side of the centerline of the slide. (See Diagrams A, B & C)
(NOT TO SCALE)
20” Max
4’
4’ 6”
3’
3'3"
13'6"
4’
C/L
WATER SAFETY ENVELOPE
13 ’6 ”
PRODUCT REFERENCE PAGES/TECHNICAL INFO
3'3"
6'6"
OR
6’6”
2'6"
DIAGRAM B (NOT TO SCALE)
Minimum Slide Clearance Area
DIAGRAM C (NOT TO SCALE)
Minimum Water Safety Envelope 20" Max
Water Level 4'
Point A 9'
134
TG - Rev. 7/15
13'6"
3'
4' 4'6"
to view our products online
ALL SLIDES SHOULD BE BONDED Check your local electrical code requirements. CLICK 8
w w w. i n t e r - f a b . c o m
7’, 10’ AND 15’ GARDEN RIDE SLIDES WATER SAFETY ENVELOPE: DIAGRAM A (NOT TO SCALE)
PRODUCT REFERENCE PAGES/TECHNICAL INFO
A minimum water depth of three feet (3') under the exit of the slide which increases to a depth of four feet (4') at point A which is located four feet six inches (4'6") from the back wall of the pool. A minimum depth of four feet (4') must be maintained at a distance of nine feet (9') along the centerline of the slide from point A. The above described water depth profile shall extend a minimum of three feet three inches (3'3") on either side of the centerline of the slide. (See Diagrams A, B & C)
DIAGRAM B (NOT TO SCALE)
Minimum Slide Clearance Area
DIAGRAM C (NOT TO SCALE)
Minimum Water Safety Envelope
ALL SLIDES SHOULD BE BONDED Check your local electrical code requirements. 8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
135
PAVER KIT INFO – ZOOMERANG SLIDE When installing an Inter-Fab Zoomerang™ slide using a paver kit, you must ensure that all standard installation requirements are met. The slide must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual. Figure 1 illustrates an example of the minimum concrete pads recommended for the Zoomerang™ slide. Specific slide position and concrete pad orientations may vary. Make sure to allow for water stub up location near the ladder section on the Zoomerang™ slide when pouring the concrete pad for the ladder section. In order to ensure proper placement, you will need to set the slide up first to determine where the concrete pillars will be located.
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Figure 2 shows a side view illustration of the Zoomerang™ slide foot pedestal and wedge anchors used in a paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”. For the ladder attachment, 1” of each 3/8” x 7” wedge anchor (4 ea.) needs to be exposed above the final deck surface. The 3/8” wedge anchors must be drilled to a depth of 6” with 1” of the bolt left remaining above the final deck surface. For the foot pedestal, 1-1/2” of each 3/8” x 7” wedge anchor (3 ea.) needs to be exposed above the final deck surface. The 3/8” x 7” wedge anchors must be drilled to a depth of 5-1/2” with 1-1/2” of the bolt left remaining above the final deck surface. The 3/8” x 7” wedge anchors (7 ea.) replace the 3/8” x 2-3/4” wedge anchors (4) from hardware kit #1 and the 3/8” x 2-3/4” wedge anchors (3) from hardware kit #2. You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation. You will need a 3/8” masonry bit for the Zoomerang™ slide. Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning.
Minimum Concrete Pads – Zoomerang™ Slide (Plan View – NOT to Scale)
Example of Slide Pedestal on Concrete Pad (Side View) HEIGHT OF WEDGE ANCHOR ABOVE FINAL DECK SURFACE
2 concrete pads are needed: (1) 12” wide x 32” long x 12” deep (1) 24” wide x 24” long x 12” deep Center feet on pads
3” max.
PAVERS
Layer of setting material to secure pavers to concrete.
Pool Edge
5” min. from edge
TG - Rev. 7/15
12” min.
24” min.
Drawing Is NOT To Scale
CONCRETE
Fig. 1 136
WEDGE ANCHORS
Fig. 2
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
PAVER KIT INFO – CITY 2 SLIDE When installing an Inter-Fab City 2™ slide using a paver kit, you must ensure that all standard installation requirements are met. The slide must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual.
Figure 2 shows a side view illustration of the City 2™ slide foot deck anchor and wedge anchors used in a paver installation. NOTE: 4 ea. CITY-DECK ANCHOR are also required (not included with slide or paver kit) to complete the City 2™ paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”. 1” of each 3/8” x 7” wedge anchor (18 ea.) needs to be exposed above the final deck surface. The 3/8” wedge anchors must be drilled to a depth of 6” with 1” of the bolt left remaining above the final deck surface. The 3/8” x 7” wedge anchors (16 ea.) replace the 5/16” lag bolts and lag shields (16 ea.) included with the required CITY-DECK ANCHOR parts (4 ea.), one set per leg. See Figure 3. The remaining 3/8” x 7” wedge anchors (2 ea.) are used (1 per side) to attach the ladder bottom to the concrete pad and replace the 1/4” x 2-1/4” wedge anchors (4 ea.) from hardware kit CS-101-SS. The ladder bottom must have the forward 1/4” hole on each side (toward slide) drilled to 1/2” to accommodate the 3/8” x 7” wedge anchor. The rear 1/4” holes on the ladder bottom are not used with the paver installation. See Figure 4. You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation. You will need a 3/8” masonry bit and a 1/2” regular bit for the City 2™ slide. Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning. Minimum Concrete Pads – CITY 2™ Slide (Plan View – NOT to Scale) 5 concrete pads are needed: (1) 12” wide x 32” long x 12” deep (4) 16” wide x 16” long x 12” deep
Example of Deck Anchor on Concrete Pad (Side View) HEIGHT OF WEDGE ANCHOR ABOVE FINAL DECK SURFACE
DECK ANCHOR
Center feet on pads
3” max.
PAVERS
Layer of setting material to secure pavers to concrete.
Pool Edge
5” min. from edge
Drawing Is NOT To Scale
Fig. 1
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
WEDGE ANCHORS
12” min.
16” min.
CONCRETE
Fig. 2 TG - Rev. 7/15
137
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Figure 1 illustrates an example of the minimum concrete pads recommended for the City 2™ slide. Specific slide position and concrete pad orientations may vary. Make sure to allow for water stub up location near the ladder section of the City 2™ slide when pouring the concrete pad for the ladder section. In order to ensure proper placement, you will need to set the slide up first to determine where the concrete pillars will be located.
PAVER KIT INFO – CITY 2 SLIDE – CONTINUED You will need a 3/8” masonry bit and a 1/2” regular bit for the City 2™ slide. Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning.
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Fig. 3
Fig. 4
When installing a City 2™ slide using a paver kit, disregard the lag shield instructions that are included with the CITY-DECK ANCHOR. See Figure 5.
Fig. 5
138
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
PAVER KIT INFO – WHITE WATER & WILD RIDE SLIDES When installing an Inter-Fab White Water™ or Wild Ride™ slide using a paver kit, you must ensure that all standard installation requirements are met. The slide must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual. NOTE: This information replaces the information provided on page 10 of the White Water™/Wild Ride™ installation manual.
Figure 2 shows a side view illustration of the White Water™ or Wild Ride™ slide foot deck anchor and wedge anchors used in a paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”. 1” of each 3/8” x 7” wedge anchor (14 ea.) needs to be exposed above the final deck surface. The 3/8” wedge anchors must be drilled to a depth of 6” with 1” of the bolt left remaining above the final deck surface. The 3/8” x 7” wedge anchors (14 ea.) replace the 3/8” x 2-3/4” wedge anchors (2 ea.) from hardware kit #SH-108 and the 3/8” x 2-3/4” wedge anchors (12 ea.) from hardware kit #SH-106. You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation. You will need a 3/8” masonry bit for the White Water™ or Wild Ride™ slide. Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning.
Minimum Concrete Pads – WWS & WRS (Plan View – NOT to Scale)
Example of Deck Anchor on Concrete Pad (Side View) HEIGHT OF WEDGE ANCHOR ABOVE FINAL DECK SURFACE
5 concrete pads are needed: (1) 12” wide x 32” long x 12” deep (4) 16” wide x 16” long x 12” deep Center feet on pads
3” max.
PAVERS
Layer of setting material to secure pavers to concrete.
Pool Edge
5” min. from edge
Drawing Is NOT To Scale
Fig. 1
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
WEDGE ANCHORS
12” min.
16” min.
CONCRETE
Fig. 2
TG - Rev. 7/15
139
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Figure 1 illustrates an example of the minimum concrete pads recommended for the White Water™ and Wild Ride™ slides. Specific slide position and concrete pad orientations may vary. Make sure to allow for water stub up location near the ladder section of the White Water™ or Wild Ride™ slide when pouring the concrete pad for the ladder section. In order to ensure proper placement, you will need to set the slide up first to determine where the concrete pillars will be located.
PAVER KIT INFO – X-STREAM 2 & G-FORCE 2 SLIDES When installing an Inter-Fab X-Stream™ 2 or G-Force™ 2 slide using a paver kit, you must ensure that all standard installation requirements are met. The slide must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual. Figure 1 illustrates an example of the minimum concrete pads recommended for the X-Stream™ 2 slide. Figure 2 illustrates the two concrete pads needed for the G-Force™ 2 slide. Specific slide positions and concrete pad orientations may vary. Make sure to allow for water stub up location near the ladder foot on both the X-Stream™ 2 and G-Force™ 2 slides when pouring the concrete pad for the ladder foot. In order to ensure proper placement, you will need to set the slide up first to determine where the concrete pillars will be located. Figure 3 shows an example side view of a slide foot and an wedge anchor used in a paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”.
PRODUCT REFERENCE PAGES/TECHNICAL INFO
1” of each 3/8” wedge anchor needs to be exposed above the final deck surface. You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation. For the 1/2” wedge anchors, you will leave 1-1/4” exposed above final deck surface. You will need a 3/8” masonry bit for the X-Stream™ 2 slide and both a 3/8” masonry bit AND a 1/2” masonry bit for the G-Force™ 2 slide. Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning. Minimum Concrete Pads: X-STREAM™ 2 Slide
Minimum Concrete Pads: G-FORCE™ 2 Slide
(Plan View – NOT to Scale)
(Plan View – NOT to Scale) You may rotate the square pads as needed.
2 concrete pads are needed: 24” wide x 24” long x 24” deep Center each foot on each pad.
2 concrete pads are needed: 1) 24” wide x 24” long x 24” deep 2) 24” wide x 40” long x 18” deep Center feet on pads.
1 concrete pad: 31” long x 27” wide x 27” deep
Fig. 1
Fig. 2
Example of Slide Foot on Concrete Pad (Side View) HEIGHT OF WEDGE ANCHOR ABOVE FINAL DECK SURFACE
X-STREAM™ 2 NOTES: • All X-Stream 2™ wedge anchors (13 ea.) are 3/8” x 7”.
G-FORCE™ 2 NOTES: 3” max.
PAVERS
Layer of setting material to secure pavers to concrete.
5” min. from edge
Drawing Is NOT To Scale
WEDGE ANCHORS
24” min.
• Two G-Force™ 2 feet use 3/8” x 7” wedge anchors (8 ea.) and the center helix foot with the steel center post uses the larger 1/2” x 7” wedge anchors. • The 3/8” wedge anchors must be drilled to a depth of 6” with 1” of the bolt above the final deck surface. • The 1/2” wedge anchors must be drilled to a depth of 5-3/4” with 1-1/4” of the bolt above the final deck surface.
24” min.
CONCRETE
Fig. 3 140
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
PAVER KIT INFO – ADRENALINE SLIDE When installing an Inter-Fab Adrenaline™ slide using a paver kit, you must ensure that all standard installation requirements are met. The slide must be compatible with the type of pool on the intended installation and all ANSI/APSP/ICC-5 2011 requirements must be met. Refer to installation manual. Figure 1 illustrates an example of the minimum concrete pads recommended for the Adrenaline™ slide. Specific slide positions and concrete pad orientations may vary. Make sure to allow for water stub up location near the ladder foot on the Adrenaline™ slide when pouring the concrete pad for the ladder foot. In order to ensure proper placement, you will need to set the slide up first to determine where the concrete pillars will be located.
1-1/4” of each 3/8” wedge anchor needs to be exposed above the final deck surface for the round pedestal and 1-3/4” for the step pedestal and exit section. (See Figures 2, 3 and 4.) You will need to factor in the thickness of your paver (3” MAX.) and the thickness of your setting material (3/8” MAX.) for your individual installation. You will need a 3/8” masonry bit for the Adrenaline™ slide. Inter-Fab Inc. will not be responsible for damage to pavers caused by drilling or mechanically attaching to concrete pad. Refer to paver manufacturer’s specific installation instructions before beginning. NOTE: All Adrenaline™ wedge anchors (17 ea.) are 3/8” x 7”.
Fig. 1
Fig. 2 – Round Pedestal (side view)
Fig. 3 – Step Pedestal (side view)
Fig. 4 – Exit Section (side view)
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
141
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Figures 2, 3 and 4 show an example side view of a slide round pedestal, step pedestal and exit section and a wedge anchor used in a paver installation. Pavers can be a maximum of 3” thick. Pavers must be mechanically attached to the concrete pad using a setting material (such as mortar or thinset for example) that is no thicker than 3/8”.
INTENDED USE INSTRUCTIONS - SLIDE PRODUCTS 1. 2. 3. 4. 5. 6.
7. 8.
PRODUCT REFERENCE PAGES/TECHNICAL INFO
9. 10. 11. 12. 13. 14. 15.
16. 17. 18. 19. 20. 21. 22. 23. 24.
Everyone who uses an Inter-Fab slide must know, understand and follow these instructions. The 1999 ANSI/APSP 4 standard for above ground pools prohibits the use of slides or diving boards on aboveground pools. Inter-Fab slides are designed for residential inground pool use only. Our slides may not be used on any above ground pool or pools designed for above ground use. Such use of our slide may result in serious injury or death. Inter-Fab slides should never be installed on wood decks, above ground pools, ponds, floating docks or platforms, boat docks or houseboats or any natural body of water. Inter-Fab slides should never be installed on any commercial, public or semi-public pool.* Be familiar with the shape and depth of the pool before you slide. A slide should only be used with the proper water safety envelope, as described in the installation manual and in accordance with the slide positioning instructions, also described in the installation manual. Because a slide may only be used in water 4’ deep or greater*, all slide users must be able to swim in deep water. (*The Zoomerang slide requires a water envelope depth of 3’6” or greater.) Weight limit for a slide is 200-350 pounds depending on the slide model, no slider weighing more than the maximum weight limit for any given slide may use the slide. The surface of the slide is very slippery when wet; USE CAUTION when entering the slide and when transitioning from standing to sitting. Slide in a feet first sitting position ONLY. IMPORTANT: sliding headfirst is prohibited: serious spinal injury resulting in paralysis or death can result. Maintain adult supervision at all times. Only one person at a time is allowed on the slide; this includes the ladder. Be sure the water delivery system is on and lubricating the slide prior to use. Collision with another swimmer or a diver can result in serious injury or death for one or both persons: Before sliding, always make sure that the path in front of the slide is free from any (including submerged) obstructions including other people or objects in the pool such as rafts, inner tubes etc. When a diving board is also present, make sure you do not use the slide while someone is on or using a diving board. Take turns. No roughhousing or horseplay should be allowed on the slide at any time. Do not stand, jump or dive from any part of the slide. Do not slide on objects such as rafts or inner tubes. doing so greatly increases your risk of injury. Do not slide through or at objects such as rafts or inner tubes, doing so greatly increases your risk of injury. Do not use a slide if physically impaired or handicapped without your doctor’s permission. Do not use a slide with a history of heart conditions, seizures, back problems, fainting or fear of heights. Do NOT use a slide if you are pregnant. Do not drink alcohol and use a slide. Don’t take chances, inspect the slide at least once a year. Do not use the slide if any part becomes loose, damaged, weakened or broken. If necessary, before using the slide again, have it inspected and repaired by a competent professional familiar with pool slides.
WARNING: SERIOUS INJURY OR DEATH CAN RESULT FROM THE IMPROPER INSTALLATION OR USE OF A SLIDE. SLIDE IN A SITTING POSITION ONLY
DO NOT SLIDE HEAD FIRST
SERIOUS INJURY CAN RESULT
DEEP WATER SWIMMERS ONLY
Face forward on the slide, holding the legs and arms with the palms of your hands forward and tilted up.
When installed according to the slide installation instructions, our slides substantially conform to Consumer Product Safety Standard Guidelines. * These intended use instructions apply to all Inter-Fab slides, with the following exception for the BYOS 2 slide product ONLY. BYOS 2 slides are designed for residential AND commercial applications.
142
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
SLIDE CARE & MAINTENANCE: ACRYLIC COMPONENTS -
You may safely use:* • Chlorox • Spic & Span Powder • Mr. Clean • Formula 409 • Windex • Glass Plus • Calgon Bath Oil Beads Do not use: • Lysol Disinfectant Spray • Dow Disinfectant Bathroom Cleaner • Pinesol • Whitecap • Lestoil 2: Light scratches, abrasions, gloss, etc. Light abrasions and scratches may be removed and original gloss fully restored using the following materials.* • Novus Plastic Polish (Novus, Inc.) • Mirror Glaze Professional Formula #17 (Mirror Bright Polish Co., Irvine, CA) • Permatex Plastic Cleaner #403D (Permatex Co., Kansas City, KS) • “J-Wax” or “Kit” Automotive Cleaner/Waxes (S.C. Johnson & Son) • DuPont or Turtlewax “White Polish” automotive polishing compound. Light Scratches: Very light scratches, scuff marks and haze can be hand polished with Permatex Plastic Cleaner or Gel-Gloss. Follow the manufacturer’s guidelines. Clean cotton cloth works best for applying the polish and buffing.*
POLYETHYLENE COMPONENTS Your slide requires periodic maintenance to keep it looking like new. • Wash monthly or more frequently, if needed. Be careful to keep cleaning material from entering the pool. • Wash with a mild soap such as hand dishwashing soap, avoid using strong cleaners or abrasives. Avoid strong alkaline (such as tri-sodium phosphate) or highly acidic cleaners. Avoid bleach and ammonia. *These suggestions and data based on information we believe to be reliable, from our acrylic manufacturer. They are offered in good faith, but without guarantee, as conditions and methods of use and procedures are beyond our control.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
143
PRODUCT REFERENCE PAGES/TECHNICAL INFO
1: General Cleaning • Use nonabrasive soap and water when possible. • Review cleaner’s label instructions before applying to acrylic surface. • Avoid harsh chemicals and disinfectants.
INFUSION PRODUCTS MAINTENANCE: BYOS 1™, BYOS 2™, & GRS™ SLIDES; POOL LIFESTYLE TABLES Your infusion slide or table/seat requires periodic maintenance to keep it looking like new and protected from the elements. Wash slide or table/seat monthly or more frequently if needed using a mild soap and soft cloth. Keep cleaning materials from entering pool. • Do not use abrasive cleaners, bleaches, chlorines, high alkaline or strong acidic cleaners. • Do not use steel wool, wire brushes, metal scrapers, Scotchbrite or other abrasive sponge pads. Keeping the gel coat finish of your slide or table/seat coated with wax - starting when the slide or table is new - is the best way to prolong its life. PRODUCT REFERENCE PAGES/TECHNICAL INFO
• Choose a wax intended for use on gel coat surfaces. Preferably one designed for use in a Marine environment. • Test product on small inconspicuous section of slide or table/seat prior to full application. • While application instructions will vary between brands of wax, in general you apply the wax with a cloth or foam pad using circular motion. Once wax dries to a haze, buff the excess with a soft dry cloth. • Routine waxing (at least twice a year) will maintain the smooth reflective surface of your slide or table/seat.
144
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
B Y O S 1 Q U O T E R E Q U E S T - PA R T 1 Distributor Name:
Phone:
Address:
Fax:
Contact Name: Distributor Email: Dealer/Builder Name:
Phone:
Address:
Fax:
Contact Name: Dealer Email: Est. Build Date:
BYOS 1 Flume Dimensions
BYOS 1™ DESIGN CONSIDERATIONS • In your design, provision must be made for future removal of the slide from the substrate if necessary. Flange/gasket connections must be accessible for inspection and maintenance, including but not limited to retightening of fasteners as the slide can move slightly both vertically and horizontally based on the slider’s weight and velocity. • Do not construct objects or formations along or over the slide pathway that obstruct the pathway for sliders or cause potential harm to the head, arms or legs. Minimum recommended head clearance above the slide pathway is 7 feet. • Minimum BYOS 1 water envelope is 6.5’ wide (centered on slide) x 13.5’ long x 4’ deep. • All BYOS 1 products are for residential in ground pool installation and use only. Inter-Fab expressly disclaims any and all warranties and liability arising from the installation or use of its BYOS 1 products in a commercial, non-pool or above ground pool application or setting. • Inter-Fab will provide you with a slide system which matches the pathway and spatial requirements you request as closely as possible. It is important to note however, that Inter-Fab does not approve or accept liability for BYOS 1 designs. All designs should be checked by a licensed Civil or Structural Engineer in your state, and when necessary inspected/approved by the applicable local governing agency.
Did you know that you can get a custom colored T7 Diving System to match your custom BYOS? INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
145
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Job Reference:
B Y O S 1 Q U O T E R E Q U E S T - PA R T 2 STEP ONE 1. What is entry height above deck? ___________ 2. What is exit height above deck? ___________ 3. What is the estimated centerline length of runway? ___________
STEP TWO BYOS 1 Flume Dimensions 1. Provide us with a drawing of your slide. (Anything from a napkin drawing to an actual CAD drawing will suffice.) Please Note: Height, slope and actual length of slide will be adjusted as close to your design as possible. Actual designs may vary.
PRODUCT REFERENCE PAGES/TECHNICAL INFO
2. Choose Slide Color: (pick one) Earth Tone Colors: ❏ Tan (-51); ❏ Gray (-52); ❏ Summit Gray (-53) Granite Colors: ❏ Mont Blanc (-54); ❏ Pebble (-55); ❏ Fashion Gray (-56); ❏ Cappuccino (-57) ❏ Autumn Sun (-58); ❏ Safari Sunrise (-59); ❏ Starry Night (-60)
STEP THREE 1. Decide if you would like optional assist rails and provide appropriate lengths, if applicable. 2. Seating Assist Rails: ❏ Surface Mount 3.5” Flange; ❏ Sub-Surface Mount 3. Climbing Assist Rails: ❏ Surface Mount 3.5” Flange; ❏ Sub-Surface Mount Length: ❏ 24”; ❏ 36”; ❏ 48”; ❏ Custom Length ___________ 4. Choose Assist Rail Color: (pick one) Standard Colors: ❏ Stainless Steel Upgrade Colors: ❏ White (-1); ❏ Earth (-3); ❏ Copper Vein (-4); ❏ Hammertone Gray (-6); ❏ Light Gray (-9)
STEP FOUR FAX this form to Marjie Beahan at: 5 2 0 - 7 9 0 - 7 1 2 7, or EMAIL this form to
[email protected] BYOS 1™ LIABILITY DISCLAIMER DISCLAIMER OF LIABILITY: This Price Quote and the design for BYOS 1 products shown herein are based solely on the specifications provided to Inter-Fab, Inc. (“Inter-Fab”) by the Builder/Distributor. Inter-Fab expressly disclaims any liability for the specifications or design, the suitability of BYOS 1 products specified herein to the installation location, the installation or alteration of BYOS 1 products. By accepting this Price Quote, the Builder/Distributor assumes all responsibility for the specifications and design, for the proper installation of BYOS 1 products and for any alteration of BYOS 1 products and agrees to hold Inter-Fab harmless for any claims, damages or liability (including attorneys fees and costs) arising from such specifications, design, installation not in compliance with Inter-Fab’s installation instructions, or alteration of BYOS 1 products. By accepting this Price Quote, the Builder/Distributor agrees to deliver, and assumes responsibility for delivering, a copy of this Disclaimer of Liability, Proper Use Instructions, and Installation Warnings to the retail consumer.
Did you know that you can get a custom colored Pool/Spa Table to match your custom BYOS? INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386 146
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
B Y O S 2 Q U O T E R E Q U E S T - PA R T 1 Distributor Name:
Phone:
Address:
Fax:
Contact Name: Distributor Email: Dealer/Builder Name:
Phone:
Address:
Fax:
Contact Name: Dealer Email: Est. Build Date:
BYOS 2 Flume Dimensions
BYOS 2™ DESIGN CONSIDERATIONS • In your design, provision must be made for future removal of the slide from the substrate if necessary. Flange/gasket connections must be accessible for inspection and maintenance, including but not limited to retightening of fasteners as the slide can move slightly both vertically and horizontally based on the slider’s weight and velocity. • Do not construct objects or formations along or over the slide pathway that obstruct the pathway for sliders or cause potential harm to the head, arms or legs. Minimum recommended head clearance above the slide pathway is 7 feet. • Minimum BYOS 2 water envelope is 6.5’ wide (centered on slide) x 13.5’ long x 4’ deep. • All BYOS 2 products are for in ground pool installation and use only. Inter-Fab expressly disclaims any and all warranties and liability arising from the installation or use of its BYOS 2 products in a non-pool or above ground pool application or setting. • Inter-Fab will provide you with a slide system which matches the pathway and spatial requirements you request as closely as possible. It is important to note however, that Inter-Fab does not approve or accept liability for BYOS 2 designs. All designs should be checked by a licensed Civil or Structural Engineer in your state, and when necessary inspected/approved by the applicable local governing agency.
Did you know that you can get a custom colored T7 Diving System to match your custom BYOS? INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
147
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Job Reference:
B Y O S 2 Q U O T E R E Q U E S T - PA R T 2 STEP ONE 1. What is entry height above deck? ___________ 2. What is exit height above deck? ___________ 3. What is the estimated centerline length of runway? ___________
STEP TWO 1. Choose Installation Type: (pick one) BYOS 2 Flume Dimensions
❏ Residential ❏ Commercial PRODUCT REFERENCE PAGES/TECHNICAL INFO
STEP THREE 1. Provide us with a drawing of your slide. (Anything from a napkin drawing to an actual CAD drawing will suffice.) Please Note: Height, slope and actual length of slide will be adjusted as close to your design as possible. Actual designs may vary. 2. Choose Slide Color: (pick one) Earth Tone Colors: ❏ Tan (-51); ❏ Gray (-52); ❏ Summit Gray (-53) Granite Colors: ❏ Mont Blanc (-54); ❏ Pebble (-55); ❏ Fashion Gray (-56); ❏ Cappuccino (-57) ❏ Autumn Sun (-58); ❏ Safari Sunrise (-59); ❏ Starry Night (-60)
STEP FOUR FAX this form to Marjie Beahan at: 5 2 0 - 7 9 0 - 7 1 2 7, or EMAIL this form to
[email protected] BYOS 2™ LIABILITY DISCLAIMER DISCLAIMER OF LIABILITY: This Price Quote and the design for BYOS 2 products shown herein are based solely on the specifications provided to Inter-Fab, Inc. (“Inter-Fab”) by the Builder/Distributor. Inter-Fab expressly disclaims any liability for the specifications or design, the suitability of BYOS 2 products specified herein to the installation location, the installation or alteration of BYOS 2 products. By accepting this Price Quote, the Builder/Distributor assumes all responsibility for the specifications and design, for the proper installation of BYOS 2 products and for any alteration of BYOS 2 products and agrees to hold Inter-Fab harmless for any claims, damages or liability (including attorneys fees and costs) arising from such specifications, design, installation not in compliance with Inter-Fab’s installation instructions, or alteration of BYOS 2 products. By accepting this Price Quote, the Builder/Distributor agrees to deliver, and assumes responsibility for delivering, a copy of this Disclaimer of Liability, Proper Use Instructions, and Installation Warnings to the retail consumer.
Did you know that you can get a custom colored Pool/Spa Table to match your custom BYOS? INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386 148
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
2015 GARDEN RIDE SERIES PRODUCT SELECTION GUIDE - DEALER COPY INTER-FAB INC • 3050 S. ALVERNON WAY • TUCSON, AZ 85713 • 800.737.5386 • FAX 520.790.7127
Distributor Name: Contact Name: Address: Dealer/Builder Name: Contact Name: Address: Job Reference: Signature:
Phone: ( Fax: ( Phone: ( Fax: (
) ) ) )
Est. Build Date: Date: 7 FT GARDEN RIDE SLIDE: ❑ LEFT TURN ❑ RIGHT TURN ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
-51 -52 -53 -54 -55 -56 -57 -58 -59 -60
TAN GRAY SUMMIT GRAY MONT BLANC PEBBLE FASHION GRAY CAPPUCCINO AUTUMN SUN SAFARI SUNRISE STARRY NIGHT
❑ OPTIONAL SUPPORT SYSTEM In addition to Slide Price (If declined initial here ________) 10 FT GARDEN RIDE SLIDE: ❑ LEFT TURN ❑ RIGHT TURN ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
-51 -52 -53 -54 -55 -56 -57 -58 -59 -60
10 FT GARDEN RIDE SLIDE Right Turn Shown
TAN GRAY SUMMIT GRAY MONT BLANC PEBBLE FASHION GRAY CAPPUCCINO AUTUMN SUN SAFARI SUNRISE STARRY NIGHT
❑ OPTIONAL SUPPORT SYSTEM In addition to Slide Price (If declined initial here ________)
15 FT GARDEN RIDE SLIDE Right Turn Shown
15 FT GARDEN RIDE SLIDE: ❑ LEFT TURN ❑ RIGHT TURN ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
-51 -52 -53 -54 -55 -56 -57 -58 -59 -60
TAN GRAY SUMMIT GRAY MONT BLANC PEBBLE FASHION GRAY CAPPUCCINO AUTUMN SUN SAFARI SUNRISE STARRY NIGHT
❑ OPTIONAL SUPPORT SYSTEM In addition to Slide Price (If declined initial here ________)
PLEASE NOTE: Freight is extra – guaranteed not to exceed $350.00 (U.S.). Inter-Fab ships direct to dealer place of business or job site.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
149
PRODUCT REFERENCE PAGES/TECHNICAL INFO
7 FT GARDEN RIDE SLIDE Right Turn Shown
RAIL MAINTENANCE: STAINLESS STEEL: Inter-Fab manufactures pool ladders and rails in 304 or 316L Stainless Steel. These grades of stainless are fairly impervious to swimming pool water that is in balance. However, unbalanced water chemistry and stray electrical current can cause stains and/or rust. Other possible causes are improper electrical grounding, indoor environment, administering chemicals near the rail or ladder, storing your rails and ladders near chemicals, etc.
PRODUCT REFERENCE PAGES/TECHNICAL INFO
With proper care and routine maintenance you can extend the life of your stainless steel pool rails and ladders: 1. Regularly inspect your stainless steel products; check for corrosion around mounting hardware and escutcheons. Replace hardware when needed. 2. Rinse off rails and ladders frequently with fresh water to remove chemicals from your pool water and wipe dry with a clean cloth. 3. To clean your stainless steel; first remove the rail or ladder from the pool. Using warm water and gentle soap or detergent and a soft cloth, rub the rail along the polish lines of the steel. Rinse thoroughly. 4. For stubborn stains you may try Brasso® metal polish. 5. You may apply marine grade wax or paste car wax to help protect your rail or ladder from the elements longer. Do not use steel wool, abrasive cleaners, mineral acids, bleaches or chlorine cleansers on your stainless steel. POWDER COATED STAINLESS STEEL: 1. Regularly inspect your pool products; check for corrosion around mounting hardware and escutcheons. Replace hardware when needed. 2. To clean your powder coated products; first remove the rail or ladder from the pool. Using warm water and gentle soap or detergents, wash the finish with a soft cloth. Rinse thoroughly with cold water. 3. For stubborn stains repeat step 2 and use a soft sponge to gently scrub away dirt. Do not use abrasive cleaners, scouring pads or other items that can cause damage to the powder coat. 4. For nicks and scratches you can purchase a touch up kit to apply to cleaned exposed stainless steel. THERMO PLASTIC COATED STAINLESS STEEL: 1. Regularly inspect your pool products; check for corrosion around mounting hardware and escutcheons. Replace hardware when needed. 2. To clean your thermo plastic coated products; first remove the rail or ladder from the pool. Using warm water and gentle soap or detergents, wash the finish with a soft cloth. Rinse thoroughly with cold water. 3. For stubborn stains repeat step 2 and use a soft sponge to gently scrub away dirt. Do not use abrasive cleaners, scouring pads or other items that can cause damage to the powder coat.
WE OFFER A ZINC ANODE TO HELP PROTECT YOUR RAILS IN MORE CORROSIVE POOL ENVIRONMENTS. The anode can be attached on a ladder near the ladder bumper or on a standard rail near the escutcheon. (Part #ANODE)
150
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
INTER-FAB BRONZE OR PLASTIC ANCHOR SOCKET INSTALLATION (IN DECK)
Installing Product in Anchor Sockets • Using tool, lower the wedge within the anchor by turning the bolt counterclockwise. To allow maximum clearance for the product, drop the wedge as far as you can without disengaging the wedge from the bolt. • Gently slide product into anchor(s). • INSTALLATION TIP: To avoid damage to finish and ease of installation use two or more people to install large span rails and rails with 8” on center spans. Ensure both ends of the rail are lined up plumb with the anchor and insert both ends at the same time. • Using tool, tighten wedge anchor by turning the bolt clockwise to secure the product in the anchor. Do not over tighten. IN DECK RETROFIT INSTALLATION USING IN DECK ANCHOR SOCKETS: Installing Anchors in the Deck You may install Inter-Fab Bronze or Plastic anchor sockets in existing concrete. The integrity of the concrete is essential to the rigidity/security of the product being installed. Professional installation is recommended. Determine the correct positioning of each product around the pool. Confirm the maximum/minimum distance from water’s edge and the correct span between anchors if using two for installation. • First inspect the anchors for defects or missing pieces. • For plastic anchors make sure the bonding screw is flush with the inside of the anchor. • Using tool, lower the wedge anchor by turning the bolt counterclockwise. Drop the wedge as far as you can without disengaging the wedge from the bolt. • Slip the anchor(s) onto the rails to confirm fit. • Mark and drill a minimum 4” diameter hole at least 5” deep. (See Figure 1)
Figure 1
INSTALLATION TIP: The center of the anchor is not the center line for the product, measure correctly to keep center line measurements the correct distance apart. • Do not make holes larger than necessary or escutcheons may not cover the installation. • Use a pry bar or sledge hammer to break the core pieces from the base of the hole. • Clean all debris from inside the hole, check the depth and insert the anchor to ensure proper fit. • Check your local electrical code to determine bonding requirements. Bond anchor in accordance to code. • Cover the hole in the bottom of the anchor with tape to keep concrete out. • Use concrete or anchoring epoxy, mix to manufacturer’s instructions.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
151
PRODUCT REFERENCE PAGES/TECHNICAL INFO
NEW CONSTRUCTION INSTALLATION USING IN DECK ANCHOR SOCKETS: Installing Anchors in the Deck Determine the correct positioning of each product around the pool. Confirm the maximum/minimum distance from water’s edge and the correct span between anchors if using two for installation. • First inspect the anchors for defects or missing pieces. • For plastic anchors make sure the bonding screw is flush with the inside of the anchor. • Using tool, lower the wedge within the anchor by turning the bolt counterclockwise. To allow maximum clearance for the product, drop the wedge as far as you can without disengaging the wedge from the bolt. • Slip the anchor(s) onto the product to confirm fit. • Tape/Cover the anchor socket and the hole in the bottom of the anchor to keep concrete out. • Check your local electrical code to determine bonding requirements. Bond anchor in accordance to code. • Make sure the top edge of the anchor is flush with the concrete surface. • Check that the anchor is level and plumb – critical for proper installation of product. • Use concrete with a minimum compression strength of 3,000 PSI. Following concrete manufacturer’s instructions; allow the concrete to fully cure prior to installing product.
IN DECK RETROFIT INSTALLATION USING IN DECK ANCHOR SOCKETS (CONT.) • • • •
Fill area around the anchor with mixture. Make sure the top edge of the anchor is flush with the concrete surface. Check that the anchor is level and plumb – critical for proper installation of product. Allow the concrete or epoxy to fully cure prior to installing product.
Figure 2
If the depth of the existing concrete is less than the required 5” depth, remove the fill material below the concrete to obtain 6” depth. The diameter of the hole below the concrete should be slightly larger than the core hole. (See Figure 2)
PRODUCT REFERENCE PAGES/TECHNICAL INFO
PERMANENT CONCRETE INSTALLATION: Some Inter-Fab rails can be mounted directly into the concrete deck. These rails have a hole drilled through the bottom of each support leg, 1-1/2” up from the end of the rail. • Place a 6” long piece of #3 rebar through the hole on each support leg. Determine the correct positioning of product around the pool. Confirm the maximum/minimum distance from water’s edge. • Check your local electrical code to determine bonding requirements. Bond anchor in accordance to code. • Support the product as the concrete is poured and during cure time. SPECIAL AFTER MARKET DECK TOP MOUNTED RAIL INSTALLATION: Determine the correct positioning of each product around the pool. Confirm the maximum/minimum distance from water’s edge. • Check your local electrical code to determine bonding requirements. Bond rail or flange in accordance to code. • With a marker, mark the 3 flange hole locations for each flange. • Using a 1/2” masonry bit and hammer drill, drill each hole 1-9/16” deep. Do not drill further down than 1-9/16” deep. Drop in anchors must NOT extend above deck. INSTALLATION TIP: Measure 1-9/16” on 1/2” drill bit and mark it with a piece of tape or marker so each hole is drilled to the correct depth. • Place anchor in hole and tap until flush with concrete. • Expand anchor with setting tool provided. Anchor is properly expanded when shoulder of setting tool is flush with top of anchor. • Align product flanges with anchors. • Secure product with flat washer, lock washer and 1” bolt. (See Figure 3)
Figure 3
152
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
CUSTOM HANDRAIL FORM Custom rails and ladders are non-returnable and are shipped via LTL shipment. Name of Distributor:
Date:
Phone Number:
Fax Number:
Contact:
Email:
Dealer Name:
Contact:
Phone Number:
Project Name:
Fax completed form to 520-790-7127 or email to
[email protected] QUOTES ARE ONLY SENT TO POOL DISTRIBUTOR; INTER-FAB WILL NOT QUOTE DEALER OR HOMEOWNER DIRECT.
❑ 2 Bend Handrail ❑ 3 Bend Handrail
All dimensions should be indicated in inches and REQUIRE the following information using CENTERLINE dims: ________ A = (For 3 Bend Handrail ONLY) ________ B = Dimension from the Bottom of Leg to the Centerline of the Peak of the Bend* *Include Amount Needed for Anchor ________ C = The Rise from the Bottom of the One Leg to the Bottom of the Other Leg ________ D = Dimension from the Bottom of the Leg to Where the Bend Begins** **Include Amount Needed for Anchor ________ E = The Span is the Centerline of One Leg to the Centerline of the Other Leg
❑ Residential Use; ❑ Commercial Use TUBING SIZE: ❑ 1.90 x .049; ❑ 1.90 x .065; ❑ 1.90 X .109; ❑ 1.50 X .120 STAINLESS STEEL GRADE: ❑ 304 (Pool Grade); ❑ 316L (Marine Grade) COATING: Powder Coating: ❑ White; ❑ Earth; ❑ Copper Vein; ❑ Hammertone Gray; ❑ Light Gray MUST BE COMPLETED TO QUOTE:
Please note that 4” will be taped off bottom of rail when powder coated. If only 3” is to be taped off, please indicate on Purchase Order. Thermo Plastic Coating:
❑ White; ❑ Tan; ❑ Gray
All Thermo Plastic Coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps. NOTES: 1) Anchors Not Included; 2) Escutcheons Included ONLY for Powder Coated Rails and Thermo Plastic Rails A
B
B
D C
E
D C
E
INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
153
PRODUCT REFERENCE PAGES/TECHNICAL INFO
HANDRAIL PATTERN:
CUSTOM STAIR RAIL FORM Custom rails and ladders are non-returnable and are shipped via LTL shipment. Name of Distributor:
Date:
Phone Number:
Fax Number:
Contact:
Email:
Dealer Name:
Contact:
Phone Number:
Project Name:
Fax completed form to 520-790-7127 or email to
[email protected] QUOTES ARE ONLY SENT TO POOL DISTRIBUTOR; INTER-FAB WILL NOT QUOTE DEALER OR HOMEOWNER DIRECT. STAIR RAIL PATTERN:
❑ 3 Bend Deck to Deck ❑ 4 Bend Deck to Deck ❑ Braced Deck to Deck ❑ Dipped Braced Deck to Deck
PRODUCT REFERENCE PAGES/TECHNICAL INFO
All dimensions should be indicated in inches and REQUIRE the following information using CENTERLINE dims: ________ A = Top Span (For 4 Bend Stair Rail ONLY) ________ B = Dimension from the Bottom of Leg to the Centerline of the Peak of the Bend* *Include Amount Needed for Anchor ________ C = Dimension from the Bottom of the Leg to the Centerline of the Lowest Horizontal Span* *Include Amount Needed for Anchor ________ D = Centerline Dimension between the Deck Posts of the Handrail ________ E = Centerline Dimension between the Back Deck Leg and the Center of the Forward Bend
❑ Residential Use; ❑ Commercial Use TUBING SIZE: ❑ 1.90 x .049; ❑ 1.90 x .065; ❑ 1.90 X .109; ❑ 1.50 X .120 STAINLESS STEEL GRADE: ❑ 304 (Pool Grade); ❑ 316L (Marine Grade) COATING: Powder Coating: ❑ White; ❑ Earth; ❑ Copper Vein; ❑ Hammertone Gray; ❑ Light Gray MUST BE COMPLETED TO QUOTE:
Please note that 4” will be taped off bottom of rail when powder coated. If only 3” is to be taped off, please indicate on Purchase Order. Thermo Plastic Coating: ❑ White; ❑ Tan; ❑ Gray All Thermo Plastic Coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps. NOTES: 1) Anchors Not Included; 2) Escutcheons Included ONLY for Powder Coated Rails and Thermo Plastic Rails
3 BEND DECK TO DECK
B
BRACED DECK TO DECK
B C D
C D
E
E
A
4 BEND DECK TO DECK
B
DIPPED BRACED DECK TO DECK
B
C
C
D
D E
E
INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386 154
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
CUSTOM LADDER/GRAB RAIL FORM Custom rails and ladders are non-returnable and are shipped via LTL shipment. Name of Distributor:
Date:
Phone Number:
Fax Number:
Contact:
Email:
Dealer Name:
Contact:
Phone Number:
Project Name:
Fax completed form to 520-790-7127 or email to
[email protected] QUOTES ARE ONLY SENT TO POOL DISTRIBUTOR; INTER-FAB WILL NOT QUOTE DEALER OR HOMEOWNER DIRECT.
❑ Residential Use; ❑ Commercial Use TUBING SIZE: ❑ 1.90 x .049; ❑ 1.90 x .065; ❑ 1.90 X .109 STAINLESS STEEL GRADE: ❑ 304 (Pool Grade); ❑ 316L (Marine Grade) COATING: Powder Coating: ❑ White; ❑ Earth; ❑ Copper Vein; ❑ Hammertone Gray; ❑ Light Gray Please note that 4” will be taped off bottom of rail when powder coated. If only 3” is to be taped off, please indicate on Purchase Order. Thermo Plastic Coating:
❑ White; ❑ Tan; ❑ Gray
All Thermo Plastic Coated rails are encapsulated in plastic coating and sealed at the ends with plastic caps.
❑ CUSTOM LADDER DESIGN All dimensions should be indicated in inches and REQUIRE the following information using CENTERLINE dims: ________ A = Height from Deck to Top of Ladder ________ B = Horizontal Span ________ C = Length from Deck to Bottom of Ladder ________ D = Distance from Deck to 1st Tread ________ E = Distance between Treads
❑ Check for Cross Brace ________ F = For Cross Brace (ONLY) – Height from Deck to Bottom of Brace ________ Number of Treads TYPE OF TREAD:
❑ SUT (Stainless Steel Sure Step Tread) ❑ HIP (High Impact Plastic - Residential Only) ❑ HARTLEY (PC or TPC Only)
❑ CUSTOM GRAB RAIL DESIGN ❑ Pair ❑ Single All dimensions should be indicated in inches and REQUIRE the following information using CENTERLINE dims: ________ A = Height from Deck to Top of Rail ________ B = Distance from Deck to Centerline of the Lowest Horizontal Span ________ C = Dimension between Deck Posts of Rail (anchor position) ________ D = Dimension between Back of Deck Leg and the Center of the Forward Bend
INTER-FAB INC. • 3050 S. Alvernon Way • Tucson, AZ 85713 • 800-737-5386
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
155
PRODUCT REFERENCE PAGES/TECHNICAL INFO
MUST BE COMPLETED TO QUOTE:
INTER-FAB VINYL LINER 1.90” ANCHOR INSTALLATION HELP GUIDE DESIGNED FOR USE IN VINYL LINER POOLS For Use With All Inter-Fab, Inc. 16” and 30” Tables and 16” Seats
PRODUCT REFERENCE PAGES/TECHNICAL INFO
INTENDED USE INSTRUCTIONS: • For use ONLY with Inter-Fab, Inc. 16” or 30” Beverage/Umbrella Tables or Seats. • For use ONLY in vinyl liner pools. • TO AVOID ENTRAPMENT DO NOT INSTALL NEAR WALLS OR OTHER OBJECTS WHERE THERE WILL NOT BE SUFFICIENT CLEARANCE WHEN USED WITH A 16” OR 30” DIAMETER TABLE OR SEAT.
WARNING: IMPORTANT INSTALLATION INFORMATION The installation of this product should be done only by a licensed and professional installer. Installation should be done strictly in conformance with all local building codes, electrical codes and other building and safety laws and regulations. Among other things, that your installer should carefully analyze the need to bond the product to prevent an electrical hazard. Failure to properly install this product could result in a dangerous condition, including but not limited to electrical or structural hazards. Inter-Fab, Inc. disclaims all liability arising from the installation and the user assumes all risk associated with the installation.
156
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
INTER-FAB VINYL LINER 1.90” ANCHOR INSTALLATION HELP GUIDE – CONTINUED
12” 4” ” 24
24”
Figure 1
24”
Figure 2
INSTRUCTIONS: • Locate suitable location for anchor installation. Allow sufficient clearance for use of either the 16” or 30” diameter tables and seats. • Anchor must be set in concrete in a minimum size pour of 24” L x 24” W x 12” D, allowing a minimum thickness below anchor of 4”. • Make sure the anchor is level and the top of the body is flush with the top of the concrete. (insure no concrete gets into the body during pour) • When concrete is cured, install gasket, liner and faceplate per manufacturer’s specifications. • Use included cap when anchor is not being used.
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
TG - Rev. 7/15
157
PRODUCT REFERENCE PAGES/TECHNICAL INFO
MINIMUM CONCRETE POUR DIMENSIONS:
TECHNICAL GUIDE NOTE: Please note that the Inter-Fab, Inc. Technical Guide is to serve as a source of information for reference only. Please adhere to Inter-Fab, Inc. installation manuals and your local building codes for proper installation of any and all Inter-Fab products. Although every effort has been made to assure the accuracy of the information provided herein, you may want to refer to the website (inter-fab.com) or call customer service (800.737.5386) for the most current information.
LIMITED WARRANTY Inter-Fab, Inc. will repair or replace, at its option, any product manufactured by Inter-Fab, Inc. that fails during the applicable warranty period because of a manufacturing or material defect; provided that the defect is not the result of improper installation, improper use or care, negligence, alterations or modifications to the product, or natural accidents (acts of God). The applicable warranty period for products manufactured by Inter-Fab, Inc. is three (3) years from the date of retail purchase, except as specified below:
PRODUCT REFERENCE PAGES/TECHNICAL INFO
Echoes of Nature™ products are individually handcrafted and painted by skilled artisans and as a result, dimensional differences and color variations are normal and are not a basis for warranty coverage. The warranty period for pumps sold with the Echoes of Nature™ products is three (3) years from the date of retail purchase. Water Sports™ sports equipment warranty periods are as follows: Volleyball Poles, Basketball Poles, Basketball Rim, and Basketball Backboard are one (1) year from date of retail purchase. Volleyball, Volleyball Net, Basketball, Basketball Net, and pumps are warranted for ninety (90) days from date of retail purchase. The Board Fall, Board Fall-L (LED), and Board Fall-F (fiber optic) water features, used for the Jump & Splash™, T7™ and aquaBoard™ products, have a warranty period of one (1) year from the date of retail purchase. Zoomerang™ slide products warranty period is one (1) year from the date of retail purchase. Build Your Own Slide™ (BYOS™), Build Your Own Slide 2™ (BYOS 2™), Garden Ride Series™, Pool/Spa Table™, Pool/Spa Seat™, and Pool Lifestyle™ products warranty periods are one (1) year from the date of retail purchase. City 2™ Slide and City Base™ products warranty period are one (1) year from the date of retail purchase. i-Lift™ products warranty period are two (2) years from the date of original shipment. The battery, charger, receiver (control box on i-Lift), transmitter (remote), and actuator have a warranty period of one (1) year from the date of original shipment. Unless expressly stated otherwise all products manufactured by Inter-Fab are for residential installation (single family residence) inground pool use only. Inter-Fab, Inc. expressly disclaims any and all warranties and liability arising from the installation or use of its residential products for any non-residential use such as semi-public, public, or commercial applications. Products expressly manufactured for commercial installation and use will be subject to this limited warranty. This limited warranty is in lieu of all other warranties, whether express or implied. Inter-Fab, Inc. disclaims any warranty of merchantability or fitness for a particular use, and noninfringement in relation to any of its products and Inter-Fab, Inc. is not liable for consequential, incidental or specific damages. This warranty is limited to the repair or replacement of the manufacturing or material defect, or refund of the original purchase price, whichever is less, at the sole option of Inter-Fab, Inc., and expressly does not cover any labor or reinstallation expenses related to the replacement of any and all Inter-Fab products. This limited warranty shall be the sole and exclusive remedy of irrespective of whether the claims are made in contract, tort, warranty, law, equity or by statue. This warranty is to the original purchaser of the product only. Inter-Fab’s limited warranty is neither transferable nor portable from consumer to consumer. The effective coverage date begins at the date of retail purchase. Product owner or representative must notify Inter-Fab, Inc. (or its wholesale agent) in writing, giving a full description of the nature of the product defect or failure along with proof of purchase, serial number(s) of the product and photos within thirty (30) days of the expiration of the applicable warranty period. Inter-Fab, Inc. reserves the right to physically inspect damaged or defective products or components to determine the cause of the damage or defect, prior to authorizing repair or replacement of its products.
Customer Service / Technical Support Monday – Friday: 7am – 4pm MST (800) 737-5386 •
[email protected] 158
TG - Rev. 7/15
to view our products online
CLICK 8
w w w. i n t e r - f a b . c o m
PRODUCT
DIVING PRODUCTS
Diving Board - Construction Duro-Beam Techni-Beam Duro-Spring Olympian Baja Jump Board Edge T7 Diving Board Commercial Diving Bases - Active vs. Passive La Mesa Los Arcos Duro-Spring U-Standards Boulder Springs Diving Base Edgestone Series Diving Base Techni-Spring - steel Techni-Spring - fiberglass Baja Jump Stand T7™ Diving System Edge™ Diving System City Base Slides - Acrylic Wild Ride™ Slide White Water™ Slide Edgestone Series Slide Rock™ - Right Turn ONLY Zoomerang™ Slide - Right Turn ONLY City 2™ Slide Slides - Polyethylene X-Stream 2™ Slide G-Force 2™ Slide Adrenaline™ Slide Slides - Infusion BYOS 1™ (Build Your Own Slide - 1st gen.) BYOS 2™ (Build Your Own Slide - 2nd gen.) Garden Ride Series Slides Rails & Ladders - Overview Ladder Designs - Traditional Residential Standard Residential Economy Residential Camelback Residential Modified Camelback Commercial Commercial Cross Braced Florida Style w/Cross Brace Residential Hinged Ladder Stair Rails - Rail Designs - Traditional 3 Bend Return to Deck 3 Bend Return to Deck - Braced 4 Bend Return to Deck 4 Bend Return to Deck - Braced Handrails - Rail Designs - Traditional 2 Bend Deck to Stair 3 Bend Deck to Stair Side Mount (Deck to Deck) Grab Rails / Spa Rails - Rail Designs - Traditional Figure 4 Grab Rail New Figure 4 Grab Rail Gibralter Style Rail Ring Style Grab Rail Single Post Grab Rail Single Post Spa Rail Exercise Bars - Rail Designs Embedded in Wall w/o Flange Flanged Fill Spouts Designer Series Rails - Overview Designer DR-G3D Grab Rail Designer DR-G3DE Grab Rail
RESIDENTIAL SLIDES
RAIL GOODS
8 0 0 . 7 3 7 . 5 3 8 6 CALL ( to speak to an Inter-Fab Customer Service Agent
PA G E 2 3 3 4 4 5 5 6 6 7 8-9 10-11 12-13 14-15 16 17 18-19 20-21 22-23 24-25 26-27 28-29 31 32-35 36-39 40 41-43 44-47 49 50-53 54-57 58-61 62 63 63 64-72 73-74 75 76 76 77 77 78 78 79 79 80 81 81 82 82 83 84 84 85 86 87 87 88 88 89 89 90 91 91 92 93 94 94 TG - Rev. 7/15
PRODUCT REFERENCE PAGES/TECHNICAL INFO
PRODUCT INDEX
i
PRODUCT INDEX
GAMES & LIFESTYLE PRODUCTS
PRODUCT REFERENCE PAGES/TECHNICAL INFO
ECHOES OF NATURE REFERENCE INFORMATION
ii
TG - Rev. 7/15
PRODUCT
PA G E
Designer Deck to Deck Return Stair Rail Designer DR-D2D3 Deck to Deck Stair Handrail Designer D2S Deck to Stair Handrail Designer Ladder Deck Top Mounted Rails - Overview Deck Top 3 Bend - Traditional Deck Top 3 Bend - Braced - Traditional Deck Top 4 Bend - Traditional Deck Top 4 Bend - Braced - Traditional Deck Top Figure 4 - Traditional Deck Top Economy Figure 4 - Traditional Deck Top Ladder - Traditional Designer Deck Top Ladder Designer Deck Top Grab Rail Designer Deck Top Economy Grab Rail Designer Deck Top Deck to Deck Return Stair Rail Deck Top Designer Deck to Deck Stair Handrail Pool Games - Overview Basketball Set Volleyball Set Pool/Spa Table & Seat - Overview - Gunite New Construction Pool/Spa Table - Gunite New Construction Pool Seat - Gunite New Construction 16” Tanning Ledge Table - Gunite New Construction 30” Tanning Ledge Table - Gunite New Construction Tanning Ledge Tables - Overview - Gunite Retrofit/Aftermarket 16” Tanning Ledge Table - Gunite Retrofit/Aftermarket 30” Tanning Ledge Table - Gunite Retrofit/Aftermarket Pool/Spa Table & Seat - Overview - Vinyl Liner New Construction Pool/Spa Table - Vinyl Liner New Construction Pool Seat - Vinyl Liner New Construction 16” Tanning Ledge Table - Vinyl Liner New Construction 30” Tanning Ledge Table - Vinyl Liner New Construction Boulder Springs Quick Reference Edgestone Series Quick Reference Paver Kit Info - Diving Products Intended Use Instructions - Diving Products Hole Drill Patterns Custom Drill Request Form Competitor Board Information Competitor Jig Information Residential Diving Envelope Information Inter-Fab Pool Specifications – ANSI/APSP/ICC-5 2011 Residential Slide Water Envelope Information Zoomerang™ Slide White Water™, Wild Ride™, X-Stream 2™, City 2™ Slides G-Force 2™ & Adrenaline™ Slides BYOS 1™ & BYOS 2™ Slides GRS 7’, 10’ & 15’ Slides Residential Slide Paver Kit Information Zoomerang™ Slide City 2™ Slide White Water™ & Wild Ride™ Slides X-Stream 2™ & G-Force 2™ Slides Adrenaline™ Slide Intended Use Instructions - Slide Products Slide Care & Maintenance BYOS 1™ Quote Request Form BYOS 2™ Quote Request Form Garden Ride Series Product Selection Guide Rail Maintenance Installation Guide for Rail Goods Custom Handrail Request Form Custom Stair Rail Request Form Custom Grab Rail & Ladder Form Vinyl Liner 1.90” Anchor Installation Guide Product Warranty Information
to view our products online
CLICK 8
95 95 96 96 97-98 99 99 100 100 101 101 102 102 103 103 104 104 105 106 106 107 108 108 109 109 110 111 111 112 113 113 114 114 115 116 117 118 119 120 121-123 124-125 126 127-130 131-135 131 132 133 134 135 136-141 136 137-138 139 140 141 142 143-144 145-146 147-148 149 150 151-152 153 154 155 156-157 158
w w w. i n t e r - f a b . c o m
PRODUCT COLOR AVAILABILITY
WHITE WITH WHITE TREAD BLUE WITH WHITE TREAD Diving Boards - standard
WHITE
TAN WITH TAN TREAD
BLUE
GRAY WITH GRAY TREAD Diving Boards - upgrade
BLACK WITH GRAY TREAD
GRAY
TAN
Acrylic Slides - standard
Acrylic Slides - upgrade
SUMMIT GRAY
DESERT TAN Rotomolded Slides (X-Stream 2, G-Force 2, Adrenaline) - standard
GRAY
MONT BLANC
SUMMIT GRAY Infusion Products (Pool Lifestyle Tables & Seats, BYOS Slides, GRS Slides - solid colors
PEBBLE
FASHION GRAY CAPPUCCINO AUTUMN SUN SAFARI SUNRISE Infusion Products (Pool Lifestyle Tables & Seats, BYOS Slides, GRS Slides - granite colors
LIGHT GRANITE
DARK GRANITE
BROWNSTONE
RUSTIC SANDSTONE Boulder Springs Collection
GRAYSTONE
EARTH
WHITE
TRUE COPPER WOK Products
LIGHT GRAY HAMMERTONE Powder Coated Rails
TAN Thermo Plastic Rails
STARRY NIGHT
SUNSET RED
Edgestone Series - standard
WHITE
TAN
COPPER VEIN
BLACK
GRAY
Colors shown here are approximate. Actual hues may vary. We strive to make our colors as accurate as possible, however, printed images are intended as a guide only and should not be regarded as precise representation.
product information & support
800-737-5386
INTER-FAB, INC. MISSION STATEMENT: We are committed to provide innovative, superior, high quality products at fair and competitive prices enhanced by extraordinary customer service.
follow us...
/interfabulous
/interfab
Rev. 7/15
WE’RE EXPERTS IN FUN!
