Transcript
Window Systems Sivoia QED
TM
Quiet Electronic Drive
Technical Reference Guide 230V international
| rev C
table of contents SYSTEM SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . Sivoia QED™ | system design benefits . . . . . . . . . . . . Sivoia QED™ | one system does it all . . . . . . . . . . . . . Sivoia QED™ | roller 64 system specifications . . . . . . . Sivoia QED™ | roller 100 system specifications . . . . . . Sivoia QED™ | wiring using power panels . . . . . . . . . . power panel wiring | detail . . . . . . . . . . . . . . . . . . . . . Sivoia QED™ | wiring using individual transformers . . .
1.1 1.2 1.2 1.3 1.4 1.5 1.6 1.7
COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sivoia QED™ | electronic drive unit (EDU) . . . . . . . . . . roller 64 | system components . . . . . . . . . . . . . . . . . . roller 64 | brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . roller 64 | specification . . . . . . . . . . . . . . . . . . . . . . . . roller 64 | finishing options . . . . . . . . . . . . . . . . . . . . . roller 100 | system components . . . . . . . . . . . . . . . . . roller 100 | bracket configurations . . . . . . . . . . . . . . . . roller 100 | bracket features . . . . . . . . . . . . . . . . . . . . roller 100 | in-line coupled roller blinds . . . . . . . . . . . . Sivoia QED™ keypads | available button layouts . . . . . Sivoia QED™ | keypad accessories . . . . . . . . . . . . . . . Sivoia QED™ | handheld infrared remotes . . . . . . . . . . Sivoia QED™ | integration to Lutron lighting controls . . accessories | optional infrared receivers . . . . . . . . . . . Sivoia QED™ | power panel SVQ-10-PNL-230 . . . . . . Sivoia QED™ | plug in transformers . . . . . . . . . . . . . .
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.10 2.12 2.13 2.16 2.17 2.18 2.19 2.20 2.21
Sivoia QEDTM Quiet Electronic Drive Window System
INTEGRATION WITH LIGHTING CONTROL SYSTEMS . . . GRAFIK Eye® | general system diagram . . . . . . . . . . . . GRAFIK® 3000/4000 | system maximums . . . . . . . . . . HomeWorks® | integration overview . . . . . . . . . . . . . . . HomeWorks® | system maximums . . . . . . . . . . . . . . . . HomeWorks® | wiring detail . . . . . . . . . . . . . . . . . . . . .
3.1 3.2 3.3 3.6 3.7 3.8
CURTAIN TRACK SYSTEMS . . . . . . . . . . . . . . . . . . . . . introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . straight track configurations . . . . . . . . . . . . . . . . . . . . system components . . . . . . . . . . . . . . . . . . . . . . . . . . system dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . Sivoia QED™ | curtain track capacity . . . . . . . . . . . . . maximum capacities for straight tracks . . . . . . . . . . . . hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hanging curtain fabric . . . . . . . . . . . . . . . . . . . . . . . . . wiring (identical to other Sivoia QED™ systems) . . . . . application examples . . . . . . . . . . . . . . . . . . . . . . . . . application examples – centre-draw . . . . . . . . . . . . . .
4.1 4.2 4.2 4.4 4.5 4.6 4.6 4.7 4.11 4.12 4.13 4.14 4.15
Technical Support : +44-(0)20-7702-0657
SYSTEM SPECIFICATIONS
Sivoia QED
TM
system specifications
Sivoia QEDTM Quiet Electronic Drive Window System
1.1
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ system design benefits Intuitive Control Design: Easy-to-Read and Easy-to-Use controls are immediately understood.
Sivoia QED (Quiet Electronic Drive), a low-voltage system, utilises a nearly silent electronic drive unit (EDU). The control options for Sivoia QED include various styles of intuitive wall-mounted keypads and handheld remote controls to suit any need.
Convenience: Simplify your life by touching one button to open or close multiple, tall, and hard-to-reach blinds. Programmable Presets: The Sivoia QED electronic drive unit (EDU) optimises blind and curtain adjustment by offering programmable stop points. The EDU will track the position of the blind or curtain and recall a preset level at the touch of a button.
Simple System Design: Sivoia QED blinds or curtains can be grouped together without the use of external "group controls".
SYSTEM SPECIFICATIONS
Ultra Quiet Operation: Blinds move as quietly as the whisper of a gentle breeze. They are sound-rated at dBA at 1 m (3 ft).
44
Reliability: Lutron Electronics has been the world leader in the lighting control industry and the designer’s choice for over 40 years.
Maximise Window Coverage: Sivoia QED provides the smallest possible light gaps between the fabric and the window frame. Precise Movement: Blinds move smoothly, in perfect unison, and with exact alignment.
|
Sivoia QED™ one system does it all
Sivoia QED technology seamlessly integrates roller blinds and curtains into one intelligent control system.
Sivoia QEDTM Quiet Electronic Drive Window System
1.2
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ roller 64 system specifications System Maximums Devices
System Dimensions Tube Diameter Roller Blind Maximum Weight Roller Blind Minimum Weight Minimum Roller Blind Width Maximum Roller Blind Width Light Gaps
41mm 5.6 kg (including hembar) 2 kg (including hembar) 560mm 2.44m less than 20mm on each side; always symmetrical
Electronic Drive Unit Details Sound Rating Ambient Temperature Maximum Torque Rotational Speed Minimum Brake Torque Maximum Duty Cycle Power Failure Memory
44dBA at 1m -10°C to 40°C 1.13 Nm 43 RPM 4 Nm 30% (electronically limited) 10 years
Power Supply Input Voltage to Transformer Output Voltage from Transformer Maximum Current Consumption
220/240 VAC 50/60Hz 24VAC 50/60Hz 0.45A for a 100 VA transformer
Presets Group Controllers
Wiring Specifications Communications Link Power Supply to Electronic Drive Unit
4 conductor, 2 twisted pair, shielded 1.0 mm 2 3 conductor cable for power from transformer to the EDU 1.5-0.75mm2
Warranty 8 year limited warranty
Sivoia QEDTM Quiet Electronic Drive Window System
1.3
Technical Support : +44-(0)20-7702-0657
SYSTEM SPECIFICATIONS
Infrared control
96 devices (includes electronic drive units (EDUs), keypads and/or contact closure input interfaces) accuracy to within +/- 1.5mm (1/16”) None – Groups are created electronically and do not require the use of an external group controller. Optional infrared remote controls
|
Sivoia QED™ roller 100 system specifications System Maximums Devices
Infrared control
96 devices (includes electronic drive units (EDUs), keypads and/or contact closure input interfaces) accuracy to within +/- 1.5mm (1/16”) None – Groups are created electronically and do not require the use of an external group controller. Optional infrared remote controls
System Dimensions Tube Diameter Roller Blind Maximum Weight Roller Blind Minimum Weight Minimum Roller Blind Width Light Gaps
66mm 8.6kg (including hembar) 2 kg (including hembar) 610mm less than 20mm on each side; always symmetrical
Electronic Drive Unit Details Sound Rating Ambient Temperature Maximum Torque Rotational Speed Nominal Brake Torque Maximum Duty Cycle Power Failure Memory
44dBA at 1m -10°C to 40°C 2.8Nm 26.7RPM 17 Nm 30% (electronically limited) 10 years
Power Supply Input Voltage to Transformer Output Voltage from Transformer Maximum Current Consumption
220/240 VAC 50/60Hz 24VAC 50/60Hz 0.45A for a 100 VA transformer
Presets Group Controllers
SYSTEM SPECIFICATIONS
Wiring Specifications Communications Link Power Supply to Electronic Drive Unit
4 conductor, 2 twisted pair, shielded 1.0 mm2 3 conductor cable for power from transformer to the EDU 1.5-0.75mm2
See p. 1.4 of wiring and programming guide for complete specifications. Warranty 8 years limited warranty
Sivoia QEDTM Quiet Electronic Drive Window System
1.4
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ wiring using power panels
Optional IR Receiver to additional Sivoia QED EDUs
.75
.75
Sivoia QED EDU
to additional Sivoia QED EDUs Sivoia QED EDU
SYSTEM SPECIFICATIONS
230Volt feed
C
230 Volt feed
C
to other Sivoia QED keypads SVQ-10-PNL-230
SVQ-10-PNL-230 A
A COMMON
INPUT COMMON
INPUT COMMON
C
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT COMMON
INPUT COMMON
INPUT
1
to Lutron lighting control system
2
3
4
Sivoia QED Euro style keypads
SVQ-CCI-8
A
SG-SVC SO-SVC (Integration to Lutron lighting control systems)
Sivoia QEDTM Quiet Electronic Drive Window System
1.5
Sivoia QED communications link to other SVQ-10-PNL-230 panels
A Communications Link
4 Conductors
B Power Wires
3 Conductors
C Comm/Power Combination SVQ-CBL-250
7 Conductors
Technical Support : +44-(0)20-7702-0657
|
power panel wiring detail
Note:
230VAC wiring entry from distribution panel
All internal components of the Sivoia QED Power Panel are pre-wired at the factory.
SYSTEM SPECIFICATIONS
.75 .75 .75
Custom seven-conductor combination communications/power cable (SVQ-CBL-250), can be used to simplify wiring. Wire up to 10 Sivoia QED EDUs per panel.
(Maximum current draw of 4A per panel). LED indicators power at terminal block
Sivoia QEDTM Quiet Electronic Drive Window System
1.6
Note: Power panel must be properly earth-grounded.
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ wiring using individual transformers
.75
.75
B
B A
A
24 V~ Power Supply
A
24 V~ Power Supply
European style keypads to control EDUs
All components on one communications link. To next keypad or contact closure interface or EDU
COMMON
INPUT COMMON
INPUT COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT COMMON
SVQ-CCI-8 contact closure inputs to communicate with outside systems
INPUT COMMON
INPUT
1
2
3
4
Notes: •
A total of 96 devices, which include EDUs, keypads, and/or CCIs, can operate simultaneously on the Sivoia QED Link.
•
When the number of keypads and CCIs in an installation exceeds the number of Sivoia QED EDUs, external keypad power supplies would be required.
Sivoia QEDTM Quiet Electronic Drive Window System
1.7
A Communications Link
4 Conductors
B Power Wires
3 Conductors
Technical Support : +44-(0)20-7702-0657
SYSTEM SPECIFICATIONS
24 V~ Power Supply
Sivoia QED roller blind
Sivoia QED roller blind
B 24 V~ power supplies, each powers one Sivoia QED EDU.
.75
Sivoia QED roller blind
Sivoia QED
TM
components COMPONENTS
Sivoia QEDTM Quiet Electronic Drive Window System
2.1
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ electronic drive unit (EDU)
There are two models of EDU, the EDU 30 (for roller 100) and the EDU 10 (for roller 64). The EDU 10 offers a slimmer profile, fitting a 41mm diameter roller tube. Both EDUs feature identical wiring and programming.
The EDU is the brain of the Sivoia QED system. It controls the movement of the roller blind, keeps track of the blind’s position, and adjusts it to the programmed positions as selected by the user.
Electronic Drive Features and Benefits: •
•
Ultra-Quiet operation: will not exceed 44 dBA measured 1 m (3 ft) from the EDU Smooth, silent starts and stops
•
Seamless integration with Lutron lighting control systems and other a/v equipment
•
Integrates with most outside systems such as home security or time clocks, without the use of external group controls or relay systems
•
•
Ten year power failure memory
•
Monitors blind position at all times
•
24 V~ low-voltage power allows Sivoia QED to be installed by low-voltage contractors
•
Blinds smoothly move in unison and stop in exact alignment within ± 1.5 mm (1/16 in) accuracy
•
Optional infrared system provides easy, convenient control from anywhere in the room
Preset controls
COMPONENTS EDU 64
EDU 100
Sivoia QEDTM Quiet Electronic Drive Window System
2.2
Technical Support : +44-(0)20-7702-0657
|
roller 64 system components
Exploded view universal bracket
idler roller tube (diameter 41mm)
universal bracket (wall, ceiling & jamb mount)
terminal block COMPONENTS
electronic drive unit
COMMON
INPUT COMMON
INPUT COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
OPEN
Open
INPUT COMMON
Preset
INPUT
CLOSE
COMMON
Close
INPUT
1
2
3
4
LUTRON
European Power and Communications Panel Style Keypads
seeTouchTM Keypads
Infrared Remotes
Contact Closure Input Boards
Note: not to scale.
Sivoia QEDTM Quiet Electronic Drive Window System
2.3
Technical Support : +44-(0)20-7702-0657
|
roller 64 brackets
• •
• •
projection adjustment (using spacers)
universal bracket design one-piece bracket for simple installation same bracket for left and right side of roller tube one bracket for ceiling, wall and jamb installation roller tube installs with simple, spring-loaded design
vertical adjustment
COMPONENTS horizontal adjustment blind adjustment During installation, each side of the blind can be adjusted both horizontally and vertically as well as in its projection off the wall (using spacers provided).
84mm (3.3”) maximum roll width projection from wall space requirements The roller 64 system installs in a space 89mm (3.5”) deep x 89mm (3.5”) high. The roll width shown above illustrates a full 6m2 (64 square foot) panel of the fabric 0.94mm (.037”) thick.
Sivoia QEDTM Quiet Electronic Drive Window System
2.4
Technical Support : +44-(0)20-7702-0657
|
roller 64 specification System dimensions
| roller 64
Pocket dimensions Sivoia QEDTM roller 64 will never require more than 89mm height or 89mm depth for installation.
The roller 64 utilises a 41mm roller tube to operate up to 5.6m2 of fabric.
Front view
Top view
• • • • • •
Dimensions
• •
19mm (.75”)
•
76mm (3”) maximum 84mm (3.3”) maximum
•
55mm (2.175”) •
41mm (1.67”) 8mm (.3”)
Specifications Low-voltage operation (24V ˜ ) Ultra-quiet drive (44dBA at 1m) Roller tube size: 41mm diameter Minimum tube width: 560mm Maximum tube width: 2.44m Maximum fabric size: 5.6m2 Installs with Sivoia QED universal one-piece bracket (jamb, ceiling or wall mount) Bracket adjustments at three directions Light gaps: 19mm on both sides Intelligent Hembar AlignmentTM: uniform movement and tracking with other Sivoia QED blind systems (within ± 2mm) Elegant keypads and optional hand-held infrared remotes Integration capability with Lutron lighting control systems (HomeWorks® and GRAFIK EyeTM)
89mm (3.5”)
Sivoia QEDTM Quiet Electronic Drive Window System
2.5
Technical Support : +44-(0)20-7702-0657
COMPONENTS
•
|
roller 64 finishing options curved fascia In addition to the square pocket shown on page 1. Sivoia QED roller 64 can also be installed using a curved fascia for a minimal appearance in the window.
roller tube end caps Provide a clean look for a system installed without fascia or pocket. Available in white only.
square fascia end caps Finished the look of the Sivoia QED roller 64 standard headbox.
dual-mounted roller blinds COMPONENTS curved fascia end cap A sleek, unobstructive look for Sivoia QED roller 64.
Dimensions 89mm (3.5”) 152mm (6.0”) (minimum) 99mm (3.9”) 159mm (6.25”) 178mm (7.0”) 83.82mm (3.3”) (minimum)
Sivoia QED TM Quiet Electronic Drive Window System 2.6
Technical Support : +44-(0)20-7702-0657
|
roller 100 system components
wall mount bracket
exploded view of wall mount system
idler and components
idler wall mount bracket
roller tube diameter
terminal block
electronic drive unit COMPONENTS
sub-bracket
sub-bracket
COMMON
INPUT COMMON
INPUT COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
OPEN
Open
INPUT COMMON
Preset
INPUT
CLOSE
COMMON
Close
INPUT
1
2
3
4
LUTRON
European Power and Communications Panel Style Keypads available in 120v and 230v configurations
seeTouchTM Keypads
Infrared Remotes
Contact Closure Input Boards
Note: not to scale. Sivoia QEDTM Quiet Electronic Drive Window System
2.7
Technical Support : +44-(0)20-7702-0657
|
roller 100 bracket configurations •
Two-piece bracket design provides flexibility to adjust blind symmetry over window opening without removing the blind.
•
The EDU mounts inside the left or right side of the roller tube to accommodate different wiring needs.
•
The two-piece bracket affords lateral adjustment, leveling adjustment and projection adjustment both during and after installation without removing the roller tube.
COMPONENTS
Wall-mount Configuration
Ceiling-mount Configuration
Jamb/Recess Configuration
Dual-mount Configuration
Sivoia QEDTM Quiet Electronic Drive Window System
2.8
Technical Support : +44-(0)20-7702-0657
|
roller 100 bracket configurations
109 mm (4.3 in) 127 mm (5.0 in)
102 mm (4.0 in) 84 mm (3.307 in)
4 mm (0.165 in)
132 mm (5.20 in) 111 mm (4.387 in)
fabric projection adjustable from 30 – 43 mm (1.2 – 1.7 in) note: shown as regular roll
Wall-mount Configuration
Ceiling-mount Configuration COMPONENTS
130 mm (5.125 in)
178 mm (7.0 in)
113 mm (4.44 in)
279 mm (11.0 in)
box not provided 119 mm (4.69 in) flap and hanger Jamb/Recess Configuration
Sivoia QEDTM Quiet Electronic Drive Window System
25 mm (1.0 in)
glass
Dual-mount Configuration
2.9
Technical Support : +44-(0)20-7702-0657
|
roller 100 bracket features Two-Piece Bracket System Considerations The sub-bracket mounts to the wall or ceiling before the main unit is installed. The measurements below indicate how to install the sub-bracket. If you know either the system width (bracket-to bracket width) or the fabric width, you can mount the sub-brackets.
System Width Fabric Width 19 mm (0.75 in)
51 mm (2.0 in)
76 mm (3.0 in)
51 mm (2.0 in)
19 mm (0.75 in)
76 mm (3.0 in)
19 mm (0.75 in)
19 mm (0.75 in)
COMPONENTS
wall brackets shown
fabric edge 19 mm (0.75 in)
system edge fabric edge indicator
wall bracket detail
Sivoia QEDTM Quiet Electronic Drive Window System
2.10
Technical Support : +44-(0)20-7702-0657
|
roller 100 bracket features Two-Piece Bracket
Roller Tube Leveling The innovative Sivoia QED idler bracket contains a set screw, which can be adjusted to raise and lower the idler side of the roller within the bracket, allowing the blind to be leveled easily without removing and re-mounting the bracket.
Lutron has designed a bracket system to maximise ease and flexibility of installation. The installer mounts a subbracket to the wall, ceiling or jamb.
sub-bracket
main bracket leveling adjustment screw ± 9.5 mm (3/8 in) Blind Centring
Projection Adjustment The roller tube can also be adjusted away from or toward the wall, without having to be re-mounted. This helps ensure the blind clears any window hardware or trim. The bracket allows the tube to be adjusted up to 13 mm (1/2 in) forward or backward and is again secured with a set screw.
adjust roller tube laterally to centre blind
± 9.5 mm (3/8 in) projection adjustment ± 13 mm (1/2 in)
Sivoia QEDTM Quiet Electronic Drive Window System
2.11
Technical Support : +44-(0)20-7702-0657
COMPONENTS
The bracket allows for adjustment of 9.5 mm (3/8 in) in either direction and locks in place with the set screw.
|
roller 100 in-line coupled roller blinds
Coupled blinds may provide a means to reduce the total installed cost of the Sivoia QED system. The number of EDUs on a job may be reduced where independent control of adjacent blinds is not needed. With a reduction in the number of EDUs there will be an equal reduction in power supplies and wiring. This may also simplify the programming and setup of the job.
COMPONENTS
In an in-line coupled system, one EDU is lifting up to three fabric panels. The EDU can lift approximately 10 m2 (100 ft2) of fabric. For a specific application, please consult your local Lutron fabricator.
System Width 19 mm (3/4 in)
System Width
38 mm (1.5 in)
Fabric Width
Sivoia QEDTM Quiet Electronic Drive Window System
With the in-line coupled system, up to three blind panels can be operated from a single EDU. A coupling pin provides for phase adjustment that allows the installer to adjust the hembar alignment after installation and without removing the fabric panels from the tube. Likewise, the in-line coupled system provides the same leveling, blind centring, and projection adjustment that is provided on the single roller Sivoia QED blind. Also, inline coupling is supported for all three mounting conditions: wall, ceiling, and jamb/recess. Fabric gaps are shown in the illustration below.
38 mm (1.5 in) Fabric Width
2.12
System Width 19 mm (3/4 in) Fabric Width
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ keypads available button layouts EUROPEAN STYLE Choose from five keypad styles for Sivoia QED. Functionality includes: 1. full open/full close 2. raise/lower fine-tuning 3. movement to programmable preset positions 4. selection of groups of EDUs for increased functionality 5. infrared reception 6. “stop if moving” from any button Dimensions: width: 86mm height: 86mm depth (with backbox): 21mm SQE-2N: Two button keypad with full open/full close
2 3
SQE-RLN:
SQE-3EN:
SQE-3DN:
SQE-33N:
keypad with fine-tune raise/lower and automatic full open or close with a four-second button press
keypad with open/ preset/close, raise/lower and infrared reception
keypad with open/ preset/close for dualmounted or two group applications
keypad with open/ preset/close, raise/lower for three group applications
Sivoia QEDTM Quiet Electronic Drive Window System
2.13
Technical Support : +44-(0)20-7702-0657
COMPONENTS
1
|
Sivoia QED™ keypads available button layouts SeeTouchTM keypads This exclusive Lutron design offers backlit, ergonomic buttons, customeized engraving and complements any décor.
Architectural •
available in insert and non-insert models
•
sharp outside corners and beveled outside edges
•
available in matt plastic and metal finishes
Dimensions: width: 69.85mm (2.75”) height: 117.48mm (4.625”) depth: 28.70mm (1.13”)
insert version
non-insert version
COMPONENTS SVQ-2WRL:
SVQ-3WRL:
SVQ-3W:
SVQ-2W:
Two button keypad with raise/lower
Three button keypad with raise/lower
Three button keypad
Two button keypad
Sivoia QEDTM Quiet Electronic Drive Window System
2.14
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ keypads available button layouts
SVQ-4WRL-IR:
SVQ-5WRL:
Four button keypad with raise/lower and infrared reception
Five button keypad with raise/lower
COMPONENTS
SVQ-2WD:
SVQ-3WD:
Four button keypad for dual-mount or two group applications
Six button keypad for dual-mount or two group applications
Sivoia QEDTM Quiet Electronic Drive Window System
2.15
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ keypad accessories
COMMON
Dimensions for Enclosure
SVQ-CCI-8 •
Performs similar functions to keypads - receives eight contact closure inputs and sets presets, programs EDUs, etc
•
Access user-programmable presets/scenes or stop
•
Utilises low-voltage, dry contact closure inputs to interface with non-Lutron A/V equipment
•
LEDs provide feedback
•
Receives IR commands
•
Receives power and communication on 4-wire Sivoia QED communication bus
•
Ships in enclosure, ready for installation
•
See pg. 2.44 of the Sivoia QED Wiring and Programming Guide (p/n 045-101-12 rev A) for information on how to access multiple groups of EDUs from a CCI
•
Terminal blocks accommodate 1.5-0.5mm2 (14-22AWG) wire
INPUT COMMON
INPUT COMMON
INPUT
COMMON
INPUT
COMMON
W: 133 mm (5.25 in) (146 mm (5.75 in) with cover) H: 260 mm (10.25 in) (273 mm (10.75 in) with cover)
INPUT
COMMON
D: 51 mm (2.0 in)
INPUT COMMON
INPUT COMMON
INPUT
1
2
3
4
COMPONENTS Sivoia QEDTM Quiet Electronic Drive Window System
2.16
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ handheld infrared remotes Convenient hand-held remotes to send infrared control signals to receivers either built into keypads or mounted directly at the electronic drive unit. All remotes available in white only.
SVQ-OCIT:
SVQ-3PIT:
Open/Close Handheld IR Transmitter
Three Preset Handheld IR Transmitter
COMPONENTS
SVQ-4GD-OCIT:
SVQ-4S2G-IT: SHADES
Multi-function Handheld Infrared Transmitter
OPEN
CLOSE
Multi-function Lights and Window Treatment Handheld Infrared Transmitter
OPEN
CLOSE
SHADES SHADE Both
1
Both
2 LIGHTS WINDOW 1 3
2
All
4
Sivoia QEDTM Quiet Electronic Drive Window System
2.17
1
2
3
4
Off
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ integration to Lutron lighting controls Integration Accessories
Features
HWI-Q96: HWI-Q96 SOLos Integrator TM
Coopersburg, PA 18036 USA
For use with Lutron HomeWorks and Sivoia QED systems only. PELV (CLASS 2: USA)
HWI-Q96 HomeWorks Address Settings
1
6
2 3 4 5
6
2 3 4 5
6
Provides two-way communication between HomeWorks and Sivoia QED systems
•
Compatible with 4 series and 8 series HomeWorks processors
•
A low-voltage component that can be placed in any HomeWorks HWI-LV-17, HWI-LV-24, or HWI-LV-32 enclosures
RX
6
2 3 4 5
TX
RX
TX
1 ON
3
ALL CLOSE
2 3 4 5
ON
2
QED Link
ON
1 1
Heartbeat
To Sivoia QED Communication Link ALL OPEN
To HomeWorks Processor H48 Link
HomeWorks® control for Sivoia QED
•
1
2
3
4 MUX
1
MUX
+V
4
+V
4
COM
3
MUX
COM
2
MUX
ON
1
•
Operate all EDUs, groups of EDUs, or single EDUs from HomeWorks Keypads or RS-232 port on HWI processor
Dimensions W: 79 mm (3.125 in) H: 142 mm (5.60 in) D: 51 mm (2.00 in)
COMPONENTS
Open Preset 1 Preset 2 Preset 3 Close
SG-SVC: SO-SVC
GRAFIK® Systems Control for Sivoia QED
•
Provides communication between GRAFIK 3000 or GRAFIK 4000 Sivoia QED system (SG-SVC) and Grafik 5000, 6000, and 7000 systems (SO-SVC).
•
Allow one zone on the GRAFIK Eye main unit for each SG-SVC or SO-SVC.
•
Does not occupy a GRX main unit address or accessory control address
•
Operates all Sivoia QED EDUs on the communication link
•
Mounts in Lutron supplied wallbox Product Dimensions W: 70 mm (2.75 in) H: 117 mm (4.625 in) D: 29 mm (1.13 in)
Sivoia QEDTM Quiet Electronic Drive Window System
2.18
Technical Support : +44-(0)20-7702-0657
|
accessories optional infrared receivers Remote IR Eye Lutron offers a remote infrared eye for Sivoia QED. It is a small dome connected to the EDU by a thin 560 mm (22 in) cable. Extensions of 3 m (10 ft) lengths are available if the layout requires the IR eye to be located further from the EDU. Unobtrusive mounting clips and adhesive tape are also provided. Use only one IR receiver per room.
.75
.75"
SV-IR Infrared remote eye, available in white and royal plum
COMPONENTS
Remote IR Eye (not shown to scale, has a diameter of 25 mm (1.0 in))
3 m (10 ft)
SV-IR-EXT-10
SV-IR connects to optional extension cable (SV-IR-EXT-10) or directly to EDU
Sivoia QEDTM Quiet Electronic Drive Window System
2.19
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ power panel SVQ-10-PNL-230 Sivoia QED power panels simplify the wiring and organise installations that require multiple transformers. The power panel consists of a 10 output transformer, 10 fuses (one per output) and a wire landing board.
Note: Maximum feed breaker size of 30 Amps. Each terminal block will accept one 0.75-6mm2 wire. Please see the Wiring and Programming Guide (p/n 045-101-12a) for specific gauges and limitations.
Each panel has 10-7 pin connectors for EDUs. Each connector is supplied with power for an EDU. The panel contains a bus that connects the four communication link wires from each EDU together. It is recommended to home-run both EDU and keypad wiring to the power panel. The panel accommodates home run wiring with seven-pin EDU connectors for up to ten EDUs.
Power panels must be grounded for safe operation and installed by a licensed electrician adhering to all local and national codes. Note: The SVQ-10-PNL-230 internally connects the four communications wires landed at each of the seven-pin connectors. Maximum current draw is 4A per panel. Maximum of two power panels per 10amp breaker.
24.13 cm
COMPONENTS
26.16 cm 9.91 cm
44.45 cm
Note: also available in 120v.
Sivoia QEDTM Quiet Electronic Drive Window System
2.20
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ plug in transformers 89 mm
Dimensions for plug in transformer
UK VERSION Plug in transformer
W: 75 mm (2.95 in)
•
Input Voltage: 230-240V, 50Hz
H: 85 mm (3.35 in)
•
Output voltage: nominal 24v AC RMS, 100 VA maximum
•
Three prong Schuko style plug
•
Contact customer service for more information
D: 120 mm (4.73 in) 75 mm
120 mm
89 mm
EU VERSION Plug in transformer
W: 75 mm (2.95 in)
•
Input Voltage: 230-240V, 50Hz
H: 85 mm (3.35 in)
•
Output voltage: nominal 24v AC RMS, 100 VA maximum
•
Two prong European style plug
•
Contact customer service for more information
D: 120 mm (4.73 in) 75 mm
120 mm
Sivoia QEDTM Quiet Electronic Drive Window System
2.21
Technical Support : +44-(0)20-7702-0657
COMPONENTS
Dimensions for plug in transformer
Sivoia QED
TM
integration with Lutron lighting control systems
INTEGRATION
Sivoia QEDTM Quiet Electronic Drive Window System
3.1
Technical Support : +44-(0)20-7702-0657
GRAFIK Eye
®
| general system diagram
System wiring is shown with two GRAFIK Eye Sivoia QED interfaces (SG-SVC) to provide control of two groups of Sivoia QED EDUs independently.
to lighting loads GRAFIK Eye wall station GRX350X-X-XX-CPN1622 A
EGRX-4S-IR
SG-SVC keypads
B
C .75
.75
.75"
.75"
24 V~ Power Supply
AC
INTEGRATION
.75
GRD
.75
.75"
24 V~ Power Supply
AC
A B C
GRAFIK Communications Link Sivoia QED Communication Link Power Wiring
Sivoia QEDTM Quiet Electronic Drive Window System
AC
AC
GRD
AC
GRD
24 V~ Power Supply AC
.75"
AC
GRD
24 V~ Power Supply AC
4 conductors 4 conductors 3 conductors
3.2
Technical Support : +44-(0)20-7702-0657
|
GRAFIK 3000/4000 system maximums ®
GRX 3000 Control units Zones per control unit Total zones per system
GRX 4000
8 8 6 24 48 64 A Grafik Eye Sivoia QED interface uses 1 zone within the Grafik Eye 16 8 SG-SVC 96
Wall Stations Window System interfaces For Sivoia QED, use the Sivoia QED interfaces Maximum EDUs per Sivoia QED interface
Sivoia QED window systems interface for Grafik Eye Interface for Sivoia QED SG-SVC is addressed manually Addressing Grafik Eye and Grafik Eye wallstations are addressed manually Sivoia QED components are addressed in Sivoia QED programming mode automatically See page 3.2 Low Voltage Wiring Wiring configurations Grafik Eye Link – Daisy Chain Sivoia QED Link – T-tap, daisy chain, home-run Setting Limits Limits can be set from the EDU, a Sivoia QED keypad or a Sivoia QED handheld infrared remote control Power The SG-SVC is powered by the 24V~ Sivoia QED power supply Sivoia QED Controllability from Grafik Eye 3000
Sivoia QEDTM Quiet Electronic Drive Window System
Zone Control A Grafik Eye window treatment wall station provides an additional point of control for a single EDU or group of EDUs connected to a SG-SVC interface, without affecting the lighting scenes. A Sivoia QED zone can be adjusted as: • Open • Preset 1 • Preset 2 • Preset 3 • Close • Stop • Raise/Lower
3.3
Technical Support : +44-(0)20-7702-0657
INTEGRATION
Scene Control A Grafik Eye wall station selects scenes on a control unit. For each Grafik Eye scene, a lighting zone can be programmed from 0-100% and as unaffected. A Sivoia QED zone can be programmed as: • Open • Preset 1 • Preset 2 • Preset 3 • Close • Unaffected
|
GRAFIK 3000/4000 system maximums ®
A B C D
GRAFIK power link GRAFIK Communications link Sivoia QED communication link Sivoia QED power wiring
3 conductors 4 conductors 4 conductors 3 conductors
A ZONE 2 ZONE 4
230V DISTRIBUTION PANEL
ZONE 1 CU WIRE ONLY
ZONE 3
ZONE 6
HOT/LIVE
to dimmed lighting loads
ZONE 5 Class 2 1 2 3 4
SSA
USA CLASS 2 IEC PELV
NEUTRAL
GRX-310X-CE-XX B To other Grafik Eye keypads
Sivoia QED EDU Terminal Block Common 12V MUX MUX AC AC EGND
4 MUX 3 MUX 2 +V 1 COM MUX COM MUX AC AC
C
SG-SVC (Back)
to next EDU or keypad D
AC
Earth Ground
24 V~ Power Supply
AC
INTEGRATION
D
Sivoia QEDTM Quiet Electronic Drive Window System
3.4
Technical Support : +44-(0)20-7702-0657
|
GRAFIK 3000/4000 system maximums ®
Grafik Eye Main Units
Grafik Eye Accessory Controls
Grafik Eye Window Treatment Interfaces
Maximum 8
Maximum 16 wall stations, interfaces and/or window treatment controls
Maximum 8
GRX-3102 GRX-3103 GRX-3104 GRX-3106 GRX-3502 GRX-3503 GRX-3504 GRX-3506
Wall Stations NTGRX-4S EGRX-4S SG-4SN See Grafik Eye catalogue for complete listing
Sivoia QED interface SG-SVC
Interfaces GRX-PRG GRX-CI-NWK-E GRX-CCO-8 (when addressed for AV or other contact closure equipment) See Grafik Eye catalogue for complete listing
GRAFIK Eye contact closure output GRX-CCO-8
Grafik Integrale currently does support window treatment interfaces
GRAFIK Eye AC Group Controllers GRX-4M-GC-CE
Window Treatment Wall Stations SG-2W SG-3W SG-3WRL SG-WD SG-5WRL
INTEGRATION
Sivoia QEDTM Quiet Electronic Drive Window System
3.5
Technical Support : +44-(0)20-7702-0657
HomeWorks
®
| integration overview A Communication Link
4 Conductors
B Comm/Power Combination SVQ-CBL-250
7 Conductors
C HomeWorks Link*
H48/Q96 Link
*Please refer to HomeWorks Technical Reference Guide Addendum (p/n 366-945/EA) for full specification of this cable.
HomeWorks processor
HWI-Q96 • Sivoia QED EDUs can be controlled directly from the HomeWorks 4 or 8 series processor using HWI-Q96 integrator.
C
• Control up to 96 EDUs. A
• Each EDU counts as a zone on the HomeWorks processor. • Sivoia QED keypads may be used but count against the 96 device limit. Sivoia QED keypads cannot be programmed using the HomeWorks processor.
B
.75 .75
Sivoia QED EDUs .75
INTEGRATION
SVQ-10-PNL-230
Sivoia QEDTM Quiet Electronic Drive Window System
3.6
Technical Support : +44-(0)20-7702-0657
HomeWorks
®
| system maximums
System Maximums Zones per HomeWorks Processor
256 Each EDU uses one zone of the HomeWorks system 16 4096 96 4 total interfaces (H48 and/or HWI-Q96) Maximum 1 H48/Q96 link per HomeWorks processor
Processors per system Zones per system EDUs per HWI-Q96 interface HWI-Q96 interfaces per H48/Q96 Link Link 4, 5, 6 (or 8 in 8 series only) can be configured as a H48/Q96 Link
Sivoia QED interface for HomeWorks Interface for Sivoia QED
Addressing
Low Voltage Wiring Wiring configurations – HomeWorks Link
Wiring Configurations – Sivoia QED Link
Setting Limits Power Sivoia QED Controllability for HomeWorks
Sivoia QEDTM Quiet Electronic Drive Window System
3.7
Technical Support : +44-(0)20-7702-0657
INTEGRATION
HWI-Q96 Connects to configurable link configured as an H48/Q96 Link • Installs in any low voltage enclosure • A second HWI-Q96 is only required when the total number of EDUs per system exceeds 96 HWI-Q96 interface addresses with dip switches EDUs are addressed via serial addressing in the HomeWorks software See page 3.8 Daisy chain ONLY between processor and interface – max 305m cable Refer to HomeWorks Technical Reference Guide Daisy chain or home-run EDUs to power panel (maximum 305m per single run Maximum 1220m total wire distance for Sivoia QED link Refer to Sivoia QED Wiring and Programming Guide (p/n 045-101-12 rev A) Limits can be set from the EDU or from the HomeWorks Software The HWI-Q96 is powered by the Sivoia QED link • Lighting and Sivoia QED zones can be programmed at any level between 0% - 100%. • For Sivoia QED, 0% equals fully closed and 100% equals fully open • Any EDU in the system can be programmed to any HomeWorks keypad in the system at any level • Sivoia QED zones can be included in security mode, vacation mode and scene save programming • Sivoia QED zones can also be controlled via RS232 and will provide system feedback to the processor • Sivoia QED keypads may be used but count against the 96 device limit • Sivoia QED keypads cannot be programmed using the HomeWorks software
HomeWorks
®
| wiring detail
Sivoia QED to HomeWorks This detail illustrates the wiring of the Sivoia QED system to the HWI-Q96 component. This allows HomeWorks to directly control any EDU or group of EDUs within the entire Sivoia QED system.
HomeWorks Processor
C
HWI-Q96
EDU
Common 12V MUX MUX AC AC EGND
A
CURTAIN
Terminal Block B
INTEGRATION
A Communication Link B Comm/Power Combination SVQ-CBL-250 C HomeWorks Link
Sivoia QEDTM Quiet Electronic Drive Window System
3.8
Technical Support : +44-(0)20-7702-0657
Sivoia QED
TM
curtain track systems CURTAIN
Sivoia QEDTM Quiet Electronic Drive Window System
4.1
Technical Support : +44-(0)20-7702-0657
introduction • Sivoia QED curtains are designed for use with pinchpleat fabrics. • The Sivoia QED curtain system wiring is identical to other Sivoia QED systems. • Standard Sivoia QED controls, interfaces and power supply can be used with the Sivoia QED Curtain system. • The Sivoia QED curtain system interfaces to Lutron and other manufacturer's equipment in the same manner as other Sivoia QED roller blind systems. • The programming is identical to other Sivoia QED products. • The curtain carriers can be loaded and unloaded without disassembly.
CURTAIN
straight track configurations • The Sivoia QED curtain system is available with straight tracks. • Sivoia QED curtain track is available in both left and right motor configurations allowing left stack, right stack and centre-draw systems.
Left draw/ Left-Mounted EDU
Right draw/ Right-Mounted EDU
Sivoia QEDTM Quiet Electronic Drive Window System
4.2
Centre-draw, Left- or RightMounted EDU
Technical Support : +44-(0)20-7702-0657
ONE WAY DRAW (LEFT OR RIGHT STACK AVAILABLE)
CENTRE DRAW
System Width
System Width Stack Back
Stack Back
Max System Width: 5.5 m (18 ft) (see two-motor systems for wider widths) Stack back = 1/6 System Width on each side (1/3 total) Curtain Speed: 152 mm/sec (6 in/sec) Specify the motor side when ordering a centre-open system
right-draw one-way system
centre-draw system
left-draw one-way system
Sivoia QEDTM Quiet Electronic Drive Window System
4.3
Technical Support : +44-(0)20-7702-0657
CURTAIN
Max System Width = 5.5 m (18 ft) Stack back = 1/3 System Width Curtain Speed: 152 mm/sec (6 in/sec)
Stack Back
system components EXPLODED VIEW ONE WAY DRAW
Gear Box (shaded for illustrative purposes only)
Curtain Track Belt Curtain Track
Electronic Drive Unit (EDU)
Auxiliary Cars Idler End Cap Pre-assembled right standard master car
CURTAIN
EXPLODED VIEW CENTRE-DRAW
Gear Box (shaded for illustrative purposes only)
Curtain Track Belt Curtain Track
Electronic Drive Unit (EDU)
Auxiliary Cars
Idler End Kit End Hook
2 Pre-assembled right standard master cars
Sivoia QEDTM Quiet Electronic Drive Window System
4.4
Technical Support : +44-(0)20-7702-0657
system dimensions ONE-WAY DRAW SIDE VIEW System Width (application-dependent 5.5 m (18 ft) max.)
213 mm (8.375 in)
RIGHT, LEFT, CENTRE-DRAW ELECTRONIC DRIVE UNIT END VIEW 95 mm (3.75 in) 51 mm (2.0 in)
CURTAIN
ONE-WAY DRAW TOP VIEW 32 mm (1.25 in) 51 mm (2.0 in) 41 mm (1.625 in)
Sivoia QEDTM Quiet Electronic Drive Window System
4.5
Technical Support : +44-(0)20-7702-0657
|
Sivoia QED™ curtain track capacity Curtain materials and construction techniques can vary widely. The size of the curtain that can be used with the Sivoia QED curtain track depends primarily on the total fabric weight of the curtains being used. The chart below provides some rules of thumb for track capacity based on the complete weight of a curtain (weight given
includes face fabric, lining and top bottom and side hems based and is calculated based on a fullness of 2.5:1). Use this chart to quickly determine if a given curtain can be driven with the Sivoia QED curtain system.
TRACK CAPACITY CHART Typical Sheer Curtain136 - 203 g/m2 (4 - 6 oz/yd2) Height
136 g/m2 (4 oz/yd2) Total fabric weight
Typical Blackout Curtain with Lining406 - 542 g/m2 (12 - 16 oz/yd2) 406 g/m2 (12 oz/yd2) Total fabric weight
542 g/m2 (16 oz/yd2) Total fabric weight
813 g/m2 (24 oz/yd2) Total fabric weight
1828 mm (72 in) tall
Up to 5.5 m (18 ft) wide Up to 5.5 m (18 ft) wide Up to 4.5 m (15 ft) wide Up to 3.6 m (12 ft) wide
2438 mm (96 in) tall
Up to 5.5 m (18 ft) wide Up to 5.5 m (18 ft) wide Up to 4.5 m (15 ft) wide Up to 2.1 m (7 ft) wide
3651 mm (144 in) tall
Up to 5.5 m (18 ft) wide Up to 4.2 m (14 ft) wide Up to 2.7 m (9 ft) wide
N/A
CURTAIN
maximum capacities for straight tracks Use this chart to determine the maximum fabric weight the Sivoia QED curtain system can operate, based upon system width. Single Motor System Width m (ft)
0.9–2.7 (3–9)
3–3.9 (10–13)
4.2–5.5 (14–18)
Weight kg (lbs)
36.3 (80)
31.8 (70)
27.2 (60)
5.8–7.9 (19–26)
8.2–11 (27–36)
63.5 (140)
54.4 (120)
Two Motor Split Tandem System Width m (ft)
1.8–5.5 (6–18)
Weight 72.6 (160) for both panels kg (lbs)
Sivoia QEDTM Quiet Electronic Drive Window System
4.6
Technical Support : +44-(0)20-7702-0657
hardware TRACK MOUNTING TO WALL Mount the curtain track to the wall using the wall mount “L” brackets. Mount the brackets using the spacing illustrated below. Mount each end bracket 152 mm (6 in) from each end of the track. Space the next bracket on both sides 406 mm (16 in) from the end brackets. Space the remaining brackets 406–609 mm (16-24 in) apart. Mount into studs everywhere possible. Use appropriate hardware. Window/Wall Side 152 mm (6 in)
406 mm (16 in)
406–609 mm (16–24 in)
406–609 mm (16–24 in)
406 mm (16 in)
152 mm (6 in)
WALL-MOUNTED BRACKET
Sivoia QEDTM Quiet Electronic Drive Window System
CURTAIN
The wall-mounted bracket provides variable adjustment from 114–171 mm (4.50–6.75 in) from the mounting surface. Cam locking clips are used to attach the brackets to the track as shown in the assembled side view below.
4.7
Technical Support : +44-(0)20-7702-0657
hardware WALL-MOUNTED BRACKET ASSEMBLED SIDE VIEW 108 mm (4.25 in)
41 mm (1.625 in)
31 mm (1.22 in)
70 mm (2.75 in)
32 mm (1.25 in) 108 mm (4.25 in)
CURTAIN
EXTENDED BRACKET ASSEMBLED SIDE VIEW 172 mm (6.75 in)
31 mm (1.22 in)
70 mm (2.75 in)
41 mm (1.625 in)
152 mm (6.0 in)
Sivoia QEDTM Quiet Electronic Drive Window System
4.8
Technical Support : +44-(0)20-7702-0657
hardware WALL-MOUNTED BRACKET DUAL-MOUNT - ASSEMBLED SIDE VIEW
248 mm (9.75” in)
41 mm (1.625 in)
31 mm (1.22 in)
118 mm (4.625 in)
89 mm (3.5 in)
229 mm (9.0 in)
CURTAIN
WALL-MOUNTED BRACKET - EXTENDED DUAL-MOUNT - ASSEMBLED SIDE VIEW 311 mm (12.25 in)
31 mm (1.22 in)
41 mm (1.625 in)
118 mm (4.625 in) 152 mm (6.0 in) 292 mm (11.5 in)
Sivoia QEDTM Quiet Electronic Drive Window System
4.9
Technical Support : +44-(0)20-7702-0657
hardware TRACK MOUNTING TO CEILING Mount the curtain track to the ceiling using the cam lock brackets. Mount the brackets using the spacing guidelines shown below. Mount one bracket 152 mm (6 in) in from each side of the track. Space the next bracket on both sides 406 mm (16 in) from the end brackets. Space the remaining brackets 406–609 mm (16-24 in) apart. Mount into studs everywhere possible. Use appropriate hardware.
Window/Wall Side 152 mm (6 in)
406 mm (16 in)
406–609 mm (16–24 in)
406–609 mm (16–24 in)
CEILING-MOUNTED BRACKET
406 mm (16 in)
152 mm (6 in)
CEILING-MOUNTED BRACKET - EXPLODED VIEW
The ceiling mount option uses only the locking clip screwed directly to the ceiling mounting surface. CURTAIN Ceiling Mounting Surface
29 mm (1.15 in)
TOP VIEW OF CLIP ARM EXTENDED IN UNLOCKED POSITION
32 mm (1.25 in)
Track
Unlocked
Sivoia QEDTM Quiet Electronic Drive Window System
4.10
Technical Support : +44-(0)20-7702-0657
measuring SYSTEM WIDTH • Installed curtain covers both end caps so the track width equals the full system width as shown below. System Width
MEASURING FOR MINIMUM RECOMMENDED OVERLAP
MEASURING FOR COMPLETE WINDOW REVEAL
• Determine the width of the system required for your application by measuring the widest part of your window opening. Curtains should overlap the window you are treating in most cases by a minimum of three inches on each side. When using the minimum overlap, the stack back of a fully-open curtain will cover a portion of the window area.
• To completely reveal a window when the curtain is open the stack back on the curtain must be considered. Consult stack diagrams for stack back dimensions.
LEFT OR RIGHT STACK
CENTRE-DRAW CENTER STACK
• In addition be aware that depending on the construction and material the curtain will be slightly wider at the bottom than at the top.
System Width
Each Stack= Approximately 1/6 (system width)
Stack= Approximately 1/3 (system width)
Sivoia QEDTM Quiet Electronic Drive Window System
CURTAIN
System Width
4.11
Technical Support : +44-(0)20-7702-0657
hanging curtain fabric CURTAIN HOOK SETTING For the best system performance, a curtain hook setting of 13 mm (1/2 in) should be used. This allows the system to operate with minimal noise.
13 mm (0.50 in)
CURTAIN FABRIC RETURN
CURTAIN 101–165 mm (4.0–6.5 in) (depends on wall mount bracket extension)
Sivoia QEDTM Quiet Electronic Drive Window System
4.12
Technical Support : +44-(0)20-7702-0657
Common 12V MUX MUX AC AC EGRD
Common 12V MUX MUX AC AC EGRD
wiring (identical to other Sivoia QED™ systems)
female EDU connector
female EDU connector
B A 4 3 2 1
AC
Earth Ground
24 V~ Power Supply
AC
AC
Earth Ground
AC
24 V~ Power Supply
CURTAIN
shield
Lutron Sivoia QED s e e To u c h k e y p a d (BACK) Wire each Sivoia QED EDU to a 24 V~ power supply. Each EDU must be EARTH grounded. Each power supply can power ONLY ONE EDU, regardless of curtain size.
Sivoia QEDTM Quiet Electronic Drive Window System
A
Communications Link
B Power Wires
4.13
4 Conductors 3 Conductors
Technical Support : +44-(0)20-7702-0657
application examples USE THE FOLLOWING APPLICATION EXAMPLES TO HELP LAY OUT YOUR PROJECT Single curtain track • It is important to maintain enough clearance between the track and the inside face of the top treatment or ceiling recess to allow the fabric to move freely within the top treatment. All measurements shown below are minimums.
140 mm (5.5 in) 89 mm (3.5 in) 51 mm (2.0 in)
25 mm (1.0 in)
25 mm (1.0 in)
51 mm (2 in) 89 mm (3.5 in)
SECTIONA-A SECTION A-A
CURTAIN
Dual-Mount curtain track • Sivoia QED tracks can be used for a combination sheer/blackout treatment. These systems will require more clearance than a single track system.
89 mm (3.5 in) 108 mm (4.25 in) 51 mm (2.0 in)
235 mm (9.25 in) 184 mm (7.25 in) 25 mm (1.0 in)
51 mm (2.0 in)
25 mm (1.0 in)
248 mm (9.75 in)
SECTIONA-A SECTION A-A
SECTIONB-B SECTION B-B
Sivoia QEDTM Quiet Electronic Drive Window System
4.14
Technical Support : +44-(0)20-7702-0657
application examples – centre-draw Tandem Curtain Track Systems • Unlike standard motorised curtain systems the Sivoia QEDTM EDU controls the speed of your curtains with extreme precision. This allows two independent EDUs to be used to create a centre-open curtain. All measurements shown below are minimums.
140 mm (5.5 in) 89 mm (3.5 in) 51 mm (2.0 in)
25 mm (1.0 in)
25 mm (1.0 in)
51 mm (2.0 in) SECTIONA-A A-A SECTION
89 mm (3.5 in) SECTIONB-B B-B SECTION
Curtain Track Corner Application • Sivoia curtain track can be used in corner applications. CURTAIN
SECTION
B-B
SECTION
Sivoia QEDTM Quiet Electronic Drive Window System
4.15
A-A
Technical Support : +44-(0)20-7702-0657
To Contact Lutron: WORLD HEADQUARTERS Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036 United States Tel: +1-610-282-3800 Fax:+1-610-282-1243
EUROPEAN HEADQUARTERS Lutron EA Ltd. 6 Sovereign Close London, E1W 3JF United Kingdom Tel: +44-(0)20-7702-0657 Fax: +44-(0)20-7480-6899
CUSTOMER SERVICE/ORDERING UK +44-(0)20-7702-0657 – 09.00 - 18.00 GMT USA +1-800-446-1503 – 08.00 - 20.00 EST CUSTOMER SERVICE/E-MAIL
[email protected] TECHNICAL SUPPORT & SERVICES UK +44-(0)20-7702-0657 – 09.00 - 18.00 GMT USA +1-800–523-9466 – 24 hours/7 days INTERNET www.lutron.com ADDITIONAL LUTRON SALES OFFICES LOCATED IN : United Kingdom Tel: +44-(0)20-7702-0657 Germany Tel: +49-309-710-4590 France Tel: +33-(0)1-44-70-71-86 Spain-Madrid Tel: +34-91-567-84-79 Spain-Barcelona Tel: +34-93-496-57-42 Hong Kong Tel: +852-2104-7733 Beijing Tel: +86-10-5877-1817 Shanghai Tel: +86-21-6288-1473 Tel: +65-6220-4666 Singapore Japan Tel: +81-3-5575-8411
Fax: +44-(0)20-7480-6899 Fax: +49-309-710-4591 Fax: +33-(0)1-44-70-70-97 Fax: +34-91-567-84-78 Fax: +34-93-496-57-50 Fax: +852-2104-7633 Fax: +86-10-5877-1816 Fax: +86-21-6288-1751 Fax: +65-6220-4333 Fax: +81-3-5575-8420
FREEPHONE (UK) 0800-282-107 FREEPHONE 00800-5887 6635 FREEPHONE 0800-90-12-18 FREEPHONE 0900-948-944 FREEPHONE 0900-948-944
©2005 Lutron Electronics Co., Inc. P/N E-367-1101/EA Rev. C 12/05
