Transcript
technical sheet
ref.: rev. no.: date: page:
Construction harness
T-4606C 5 08/09 1/2
The Construction harness combines the versatility of adjustment with a belt that offers support and the capability to insert tool pouches. With its adjustable leg, shoulder, chest and sub-pelvic straps it can be adjusted to a perfect fit for maximum comfort. The belt is constructed of foam backing for comfort and support, which makes this belt the ideal choice for height safety work within construction environments that involve work positioning applications. For further information, refer to “Use and Maintenance Instructions” for harnesses, belts and lanyards. Features • Five-point adjustment • Adjustable back D-ring • Adjustable chest strap • Lanyard retaining clips on both shoulder straps • Tongue and buckle legs • Integrated shoulder pads • Fall indicators / inspection tag / serial number • Laminated back support • Rigid removable belt accommodates tool pouches • Two colors: blue shoulder straps and black leg straps Sizes • Small harness with small belt: • One size harness with medium belt: • One size harness with large belt: • X-large harness with X-large belt:
EBD95S EBD95M EBD95L EBD95XL
Belt Sizes Small Medium Large X-large
31 – 39 in. 35 – 43 in. 38 – 46 in. 44 – 52 in.
(78 – 100 cm) (88 – 110 cm) (98 – 120 cm) (108 – 130 cm)
EBD95L Applications • Fall arrest • Construction • Side positioning Applicable standards • CSA Z259.10-06
© 2009 Tractel ®. All rights reserved.
Specifications are subject to change without notice. Drawings are for illustrative purposes only.
technical sheet
ref.: rev. no.: date: page:
Construction harness
T-4606C 5 08/09 2/2
AVAILABLE MODEL EBD95L – Tongue and buckle legs
Side positioning D-rings
• Fall arrest attachment element (mandatory) • Fall arrest applications • Side positioning D-rings
PARTS
SPECIFICATIONS
APPLICABLE STANDARDS
Webbing
High tenacity polyester Width: 13⁄4 in. (45 mm) Thickness: 1⁄16 in. (1.4 mm) Tensile strength: 5,700 lbs. (25.4 kN) Webbing is heat-cut to prevent fraying.
CSA Z259.10-06 ANSI Z359.1-2007
Tongue and buckle webbing (legs)
High tenacity polyester Width: 13⁄4 in. (45 mm) Thickness: 1⁄8 in. (3 mm) Tensile strength: 10,000 lbs. (44.5 kN) Webbing is heat-cut to prevent fraying.
CSA Z259.10-06 ANSI Z359.1-2007
Stitching
Harness is lock-stitched. Thread: #138 polyester Belt is lock-stitched. Threads: #207 polyester
CSA Z259.12-01
Back and side D-ring
Plating: zinc dichromate Proof-loaded 100% at 3,600 lbs. (16 kN) Tensile strength: 5,000 lbs. (22.2 kN)
CSA Z259.12-01 ANSI Z359.1-2007
Sliding bar adjuster
Plating: zinc dichromate Tensile strength: 4,000 lbs. (17.8 kN)
CSA Z259.12-01 ANSI Z359.1-2007
Shoulder pads
Foam: closed cell EVA 80 Outer fabric: polyester Thickness: 1⁄4 in. (5 mm)
Tongue and buckle
Plating: zinc dichromate Tensile strength: 4,000 lbs. (17.8 kN)
Grommets
#2 spur brass
CSA Z259.12-01 ANSI Z359.1-2007
Plastic and elastic retainers Each webbing strap with a free end has keeper loops.
CSA Z259.10-06
Tool belt webbing
High tenacity polyester Width: 13⁄4 in. (45 mm) Thickness: 1⁄8 in. (3 mm) Tensile strength: 10,000 lbs. (44.5 kN) Webbing is heat-cut to prevent fraying.
CSA Z259.10-06 ANSI Z359.1-2007
Back support foam
Closed cell foam laminate Thickness: 5⁄16 in. (8 mm)
Capacity
386 lbs. (175 kg), one person
© 2009 Tractel ®. All rights reserved.
CSA Z259.10-06
Specifications are subject to change without notice. Drawings are for illustrative purposes only.
