Preview only show first 10 pages with watermark. For full document please download

Technical Specification

   EMBED


Share

Transcript

XELLEX BATTERY (HK) LIMITED SHENZHEN XELLEX BATTERY & POWER SUPPLY TECH. CO., LTD AG7 TECHNICAL SPECIFICATION DRAFTED BY: CHECKED BY: APPROVED BY: CLIENT ADMITED SIGN: SHENZHEN XELLEX BATTERY & POWER SUPPLY TECH. CO., LTD HONGKONG XELLEX BATTERY CO., LTD 6/F, Jiayu Bldg, Dong’er Xiang 15#, Gongyuan Road, 22 Industry Zone, Bao’an District, Shenzhen, PRC. Flat A, 12/F., Wing Sing Commercial Centre, 12-16 Wing Lok Street, Hong Kong TEL: 0086-755-27664401 27664402 27664403 FAX: 0086-755-27806777 27664407 Website: www.xellex-battery.com Email: [email protected] TEL: 00852-28507117 FAX: 00852-25819986 Website: xellex.en.alibaba.com Email: [email protected] The Technical Specifications hereinafter is only applicable to the Hg & Cd Free Alkaline Zinc Manganese Dioxide AG7 type battery, which was provided by Xellex Battery Co., Ltd. All the practical technical data, which were used to describe Battery Performance involved in the Specifications are obtained from the relevant experiments to the products of Xellex. Rights reserved to take relevant rectifications or modifications to the structure and performance of the products without prior notice. Page 1 of 6 Spec. NO.:XL-AG7 Edition:Rev.00 Date:2005-08-28 1. Scope The Specifications is solely applicable to the “Xellex” Hg & Cd Free Alkaline Zinc Manganese Dioxide Battery---AG7. 1.1Designations Xellex :AG7 IEC :LR57 JIS : ANSI : Other: LR927, 399A 1.2 Reference Document IEC 60086-1(2000) --- Primary Batteries - General IEC 60086-2(2000) --- Primary Batteries – Specification Sheets 2. Chemical System Alkaline Electrolyte--- Zinc-Manganese Dioxide Battery (0%Hg and 0%Cd added) 3. Dimensions Diameter :9.4±0.1 mm Height:2.7±0.1 mm 4.Nominal Voltage:1.5 Volts 5.Average Weight:0.64 g 6. Nominal Capacity 45mAh (15KΩ continuous discharge,Temp.:20±2℃,CDV:1.0 Volts) 7. Electrical Performance (Conditions:22 KΩ±0.5% load resistance, Measuring time 0.3 Seconds, Temperature at 20±2℃, Tested within 30 Days after delivery) New Battery After 12 Mths Shelf Time at room Temp Off-load On-load Voltage(V) Voltage(V) ≥1.51 ≥1.5 ≥1.50 ≥1.49 Acceptance Standard MIL-STD105E,Class II,Double Sampling,AQL=0.4 *The Hair Spring Ampere Meter with ±0.5% Accuracy (0.5 Level) shall be used. 8. Service Output (Conditions:Test Temp.20±2℃ ,Relative Humidity: 45%-75% Test within 30 Days after delivery) Page 2 of 6 Spec. NO.:XL-AG7 Edition:Rev.00 Date:2005-08-28 Average Minimum Discharge Discharge Condition Test Standards Reference Discharge Daily Discharge Load Time 47KΩ 24 Hours Time Cut-off After 12 Mths Discharge New Battery Voltage(V) 1.2 Shelf Time at room Temp. ≥420Hours ≥390Hours Acceptance Criteria:9 batteries shall be tested for each discharging standard, the Average Discharging Time should be equal to or above the Average Minimum Discharging Time required. Moreover, the total amount of the batteries whose Average Discharging Time is less than 80% of the time required shall not exceed 1, Thus, the ADT of the batteries can be recognized accorded with the requirements 9. Electrolyte Leakage Proof Characteristics Item Condition Period Characteristic Acceptance s Standard There shall be no 22KΩ Over-discharge Characteristics continuous deformation discharge at Temp.: 20 ± 2 ℃ Relative exceeding the 48 Hours specified Humidity : 65 ± dimensions, 15%RH nor leakage recognized by human eye 10. Safety Characteristics Page 3 of 6 N=30,Ac=0,Re=1 Spec. NO.:XL-AG7 Item Edition:Rev.00 Condition Period Date:2005-08-28 Characteristics Acceptance Standard Temp: 20±2℃ Short Circuit Characteristics Relative Humidity: 60±15% There shall be Directly connect the Positive 24 Hours & Negative Terminals with a no explosion N=9,Ac=0,Re=1 of battery wire 11.Marking The following markings will be printed, stamped or impressed on the body of the battery: (1)Designation :AG7 (2)Manufacturer’s name, abbreviation or brand:XELLEX (3)Nominal Voltage :1.5V (4)Polarity :“+”, “-” (5)Warning: Battery may explode or leak if recharged or disposed of in fire. (6)Expiry Date(Guarantee Period):The Date which show on the labels of the finished product is used to indicate the Quality Assurance Period before it is used. 12. Caution for Use (1)Since the battery is not manufactured for recharging, there are risks of electrolyte leakage or causing damage to the device if the battery is charged. (2)The battery shall be installed with its “+” and “-”in the right position. (3)Short-connecting, heating, disposing of into fire and disassembling the battery are prohibited. 13. Shelf Life: 12 months after delivery under proper storage conditions. 14. Discharging Curves ⑴15KΩ,24 Hours/Day, E.P.V: 0.9 V Continuous Discharging Curves(Figure 1) 15.Battery Dimensions & Structure(Figure 2) Page 4 of 6 Spec. NO.:XL-AG7 Edition:Rev.00 Date:2005-08-28 Figure 1: Voltage discharge curve at 21℃, Discharge schedule: 24hours/day Load: 15000ohms (v) 1.60 1.50 1.40 1.30 1.20 1.10 1.00 0.90 0.80 0 48 96 144 192 240 288 336 384 HOURS OF SERVICE XLA-007 Page 5 of 6 432 Spec. NO.:XL-AG7 Edition:Rev.00 Figure 2: Page 6 of 6 Date:2005-08-28