Transcript
technical specifications BF302 general Individual vents/chambers for improved air velocity and flow capacity Double extended-excursion vented-spider 15” woofers 15mm Birch with clever bracing brings lightweight yet rigid cabinet construction Double baffle board with flush mount transducers SIS pre-wired for very high damping and further reduced distortion (with ALC) Dedicated protection in combination with SDP modules (with ALC) Durotect™ scratch-resistant coating
description The BF302 is a front-loaded subwoofer system, for both permanent and portable applications. Featuring double 15” long-excursion high-power woofers (with vented double-spider frame), the BF302 delivers high quality, tight and accurate bass response. The SIS pre-wiring ensures complete cable/connector compensation between the BF302 and ALC. Typical applications for the BF302 include bass extension of main sound systems, used in multiples depending on the application and low frequency requirements. Due to Alcons Audio continuous R&D, all specifications are subject to change without prior notice.
The higher tuning makes the BF302 an ideal highpower punch-bass system for live- or club sound, in combination with an Alcons top cabinet / array. For full system performance, we recommend using the BF302 in combination with an ALC4 (or ALC6) amplified loudspeaker controller. Driven by the ALC, the BF302 delivers maximum sound quality and output power with dedicated and inaudible (power and excursion) protection (SDP circuit).
evolutionary audio solutionsTM
technical specifications BF302 dimensional drawing
technical specifications
Frequency Response
+/- 3 dB
+/- 10 dB
38 Hz -
Sensitivity (SPL 1W/M)
100 dB
Nominal Impedance
4 ohms
Maximum RMS power
2000 W
Maximum peak power
14000 W
SPL program/peak
Dispersion H x V
42 Hz - 300 Hz
133/141 dB
omni
physical specifications
System
subwoofer, front loaded
Drivers LF
2 x AW15.4 15” woofer,
Cross-over frequency HP
Physical dimensions
E: W: T: F:
45 Hz. recommended 2 x Speakon NL4 input mm
in.
Height
1147
45.1
Width
460
18.1
Depth
500
19.7
77,0 kg
(169.4 lb)
65,0 kg
(143.0 lb)
A : Alcons Audio B.V. De Corantijn 69 1689 AN Zwaag The Netherlands
Connectors
individually vented
Weight (approx.) BF302
BF302i
Warranty
6 years limited
The BF302 is available in standard version, or installation version. The BF302i (“install”) comes without handles, castor wheels and cover.
[email protected] www.alconsaudio.com +31 (0)229 28 30 90 +31 (0)229 28 30 99
Due to Alcons Audio continuous R&D, all specifications are subject to change without prior notice.
evolutionary audio solutionsTM
