Transcript
technical specifications TS3 general 1” soft-dome tweeter on a small wave-guide for increased HiFi quality output SIS pre-wired for very high damping and further reduced distortion (with ALC) Dedicated protection in combination with SDP modules (with ALC) 16 ohms impedance offers economical connection of multiple systems Omnimount™ mounting points, bracket (option) Passive filtering for easy operation and economical powering
description The TS3 is a 2-way ultra-compact versatile loudspeaker, for permanent applications. Featuring a 1” soft-dome tweeter with single 6.5” high quality woofer, the TS3 delivers exceptional performance from a very compact and efficient package. The system includes dedicated filtering and system equalizing.
Due to Alcons Audio continuous R&D, all specifications are subject to change without prior notice.
The SIS pre-wiring ensures complete cable/connector compensation between the TS3 and ALC. The enclosure design provides for low profile mounting (ceiling, wall). Typical applications for the TS3 include background system for medium installations (theatre, A/V, PA) or fill/delay/surround speaker in medium sized systems. In applications where extended bass response is required, the TS3 can be combined with a bass or sub bass system. For full system performance, TS3 can be used in combination with an ALC2 (or ALC4) amplifier/ controller. Driven by the ALC, the TS3 delivers maximum sound quality and output power with inaudible (power and excursion) protection (SDP circuit).
������������������������������
dimensional drawing
technical specifications Frequency Response +/- 3 dB +/- 10 dB Sensitivity (SPL 1W/M) Nominal Impedance
67 Hz - 20.000 Hz 47 Hz 89 dB 16 Ohm
Maximum RMS power
100 Watt
Maximum peak power
400 Watt
SPL program/peak Dispersion H x V Polarity
109/115 dB 90° x 60° positive voltage on terminal 1+ of Speakon gives forward cone motion
physical specifications System
2-way, full-range
Filtering
passive
Drivers LF
1 x AMB65 6.5”, vented
Drivers HF
1 x AST1” soft-dome tweeter
Cross-over frequency Connectors
E: W: T: F:
2 x Speakon NL4 input
Physical dimensions
mm
inches
Height
303
11.9
Width
200,5
7.9
Depth
198
7.8
4,6 kg
(10.1 lb)
Net.weight (approx.) A : Alcons Audio B.V. De Corantijn 69 1689 AN Zwaag The Netherlands
3000 Hz.
Warranty
6 years limited
[email protected] www.alconsaudio.com +31 (0)229 28 30 90 +31 (0)229 28 30 99
Due to Alcons Audio continuous R&D, all specifications are subject to change without prior notice.
evolutionary audio solutionsTM
