Transcript
TeckNet X500-V2 Keyboard
Welcome Thank you for choosing this TECKNET product. To ensure optimum performance and safety, please read these instructions carefully before operating this product. It is strongly recommended you keep this manual for future reference. Num Indicator Caps Indicator
Product Layout
Low Power Indicator
Touch Pad
Left Mouse Key Power Switch
SKU: X500 BULK : HSP331 www.tecknet.co.uk Made i n C hina
Manufacturer's SKU:HW155
Package Contents 1 x TeckNet X500-V2 Keyboard 1 x Nano Receiver 1 x User Manual 1 x Warranty Card
1
Right Mouse Key
Product Specifications 1. 2. 3. 4. 5.
Battery Type: 2 AAA batteries Modulation System: GFSK Multimedia functions. USB 2.0 interface, plug & play, no driver required. Compatible with Windows OS (Windows 98, 2000, XP, Vista, WIN7, WIN8, Win10). 6. Operating Voltage: 1.8-3.0V. 7. Operating Current: 10mA. 8. Sleeping Current: 0.2mA 9. Keystroke Force: 60±20g. 10. Key Life: 3 million keystrokes 11. Dimension: 366.5 x 121.3 x 18.35mm 12. Touchpad Size: 74.6 x 89.6mm 13. Weight: 271g
Keyboard Instructions Shortcut Keys FN + F1
Play/Pause
FN + F2
Previous
FN + F3
Next
FN + F4
Vol+
FN + F5
Vol-
FN + F6
Mute
FN + F7
Internet
FN + F8
Search
FN + F9
Favorite
FN + F10
Insert
FN + F11
Mum Lock
FN + F12
Print Screen
FN +
Top Line
FN +
Last Page
FN +
Next Page
FN +
End Page
Note: "FN"+"F9" Favorite is not for Win10
2
Touchpad for PC
Change to next Program
Show menu
Three fingers slide up
3
Touchpad for Android
Battery Installation The X500-V2 wireless keyboard uses two AAA batteries (not included). Open the battery compartment cover, take out the Nano receiver. Install the batteries into the compartment, and make sure the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.
LED Indicator Num Indicator: Press "FN" +"F11", LED will turn blue. Press "FN" +"F11" again, LED will turn off. Caps Lock Indicator: Press "Caps Lock" key, LED will turn blue. Press again, LED will turn off. Power Indictor: LED will show red color then turns off when the keyboard turns on.LED will turn red and flash if the battery is lower than 2.1V.
4
Pairing Method Make sure the distance between the keyboard and the PC is within 3M. Plug the Nano receiver into USB port of the PC and turn on the keyboard. The blue "Power" LED will be on and red "Power" LED will flash for 1-2 seconds and turn off. Now the pairing is successful. Note: If the red indicator only flashes one time then turns off, the pairing is unsuccessful. Press "Esc" + "K" to re-connect.
Numeric Zone Press the "Num Lock" button, the LED of "Num" will turn on. Letter "M", "J", "K", "L", "U", "I", "O" are changed to numeric 1, 2, 3, 4, 5, 6, 7, 8, 9. Press "FN" + "F11" again, the LED of "Num" will turn off. Numeric 1, 2, 3, 4, 5, 6, 7, 8, 9 are changed to letter "M", "J", "K", "L", "U", "I", "O".
Energy Saving Mode 1. When the keyboard is not used for 10 minutes, it will enter dormant. Press any key to active. 2. Press and hold any key for 2 minutes, the keyboard will enter dormant. Press any key to active.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS. 1.SAVE THESE INSTRUCTIONS - This sheet contains important safety and operating instructions. 2.Before using the product, read all instructions and caution markings on the product, accessories and device using our product. 3.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4.Children should be supervised to ensure that they do not play with the appliance. 5.Keep the product away from fire or explosion may occur. 6.For indoor use only. Do not expose to rain, water, excess moisture or snow. 7.Do not place product in or near inflammable, explosive or hazardous object. 8.Do not place in or near water, rain, excess moisture or extreme heat.
9.Do not operate product with damaged cord or plug. 10.Do not operate product if it has been damaged in any way. 11.Do not disassemble the product. Disassembly may result in a risk of safety hazards.
5
12.Do not throw or shake the product 13.To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply
Limited 18-Month Warranty: What this warranty covers. Shenzhen Unchain Technology Co., LTD. (Manufacturer: “Unchain”) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is. Unchain warrants the TeckNet product for 18 Months. What will we do to correct problems? Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the TeckNet product is not provided to Unchain for inspection upon Unchain’s request at the sole expense of the purchaser, or if Unchain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to claim the warranty Please contact retailers or visit TeckNet website www.tecknet.co.uk for more information
Disclaimer Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.
Warranty We warrant that products purchased from authorized distributors will meet the applicable product specifications and be free from all defects in design, assembly, materials and workmanship. Please contact retailers or visit our website www.tecknet.co.uk for more information.
6
TeckNet P.O. BOX 122 Liverpool L9 7WQ www.tecknet.co.uk
