Transcript
TECHNICAL DATA SHEET
TecVision XT1100X White Extra Wide Viewing Cone/Typical Contrast/On-Axis Gain of 1.1 XT1100X White is recommended when projector brightness and screen size dictate the need for a modest increase in brightness. XT1100X White performs best where ambient light is controlled. Like all TecVision surfaces XT1100X White offers superior quality, consistency, uniformity and is 4K ready. Also available as acoustically transparent perforated or nano perforated in limited sizes. The TecVision Family of Surfaces TecVision™ Engineered Surface Technology is initially offered in five exclusive formulations on Draper tab tensioned and permanently tensioned screens. These five formulations are designed to optimize contrast ratio and color fidelity in a broad range of settings and at a variety of light levels. Five white surfaces are available with gains ranging from 1.0 to 1.8 across remarkably wide viewing cones. Three grey surfaces offer excellent performance under higher room light levels.
Surface Characteristics
Transmissive Performance*
• Maximum Image Height: 180” (457 cm) • Weight (g/sm): 445 • Thickness (mm): .32 • Cleaning: Mild soap and soft cloth • Flame and mildew resistant • Composition: Flexible PVC
• Gain Chart—See below 0º Gain: 1.1 Half Gain Angle: Material does not reach half gain, minimum gain: 1.0 *Individual test results may vary slightly.
This vewing surface is certified by the Imaging Science Foundation for excellent color reproduction and fidelity. For more information about this strict industry standard visit: www.imagingscience.com Draper, Inc. 411 S. Pearl St. Spiceland, IN 765-987-7999 www.draperinc.com Form: XT1100X_215 PROJECTION SOURCE SCREEN SURFACE
3.25 3.00 2.75 2.50 2.25 2.00
GAIN
1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 75º 70º 65º 60º 55º 50º 45º 40º 35º 30º 25º 20º 15º 10º
5º
0º
5º
10º 15º 20º 25º 30º 35º 40º 45º 50º 55º 60º 65º 70º 75º
VIEWING ANGLE
GAIN CHART — TECVISION XT1100X WHITE
