Telecor Eseries Ethernet Poe Intercom And Paging

Transcript

eSeries Version 1.0 www.mytelecor.com Telecor is excited to announce additions to its eSeries product family! In addition to the Telecor eClocks, we are proud to announce the eSeries eStations, eConsole and eAmplifier. May 7, 2013 e300 ↑ 15:27:07 1000 ↓ Status ESC FORWARD/ DISPLAY CALLS X REDIAL PAGE PUSH TO CALL ALL SOURCE PUSH TO TALK SELEC TED ROOMS HOLD SPEAK ER PHONE CANCE L/ CLEAR Status PTT/ ENTER CANCEL eSeries Status ™ eSeries PUSH TO CALL ™ 0 dB -6 dB GAIN +6 dB eINPUT INPUT 2 INPUT 1 4 3 2 1 STATUS CANCEL TROUBLE eSeries POWER Status LOCKED OUT PUSH TO TALK ™ TONE SILENCE Status eSeries ™ -12 dB eAMP Standard Features TONE / ANNOUNCEMENT Audio • Crystal clear HD Audio speech quality • Non-blocking audio between stations and consoles via LAN • Advanced features configurable via ePORT • Firmware upgradable over LAN • Just Plug It In design • No head end, central server or controller equipment required • Extremely low latency • Extremely fast all station audio connect times The next-generation Telecor eSeries emphasizes Power-over-Ethernet technology and Just Plug It In design to ensure easy wiring, straight-forward network planning, and flexible scalability. The decentralized network structure and use of peer to peer technology ensures that no head end, central server or controller equipment is required. The simple network structure devices do not require any network configuration or administration, eliminating IP address and DHCP server requirements. Teleor’s eSeries devices are functional out of the box and do not require any additional programming or setup. All you have to do is Just Plug It In The eSeries features crystal-clear high-definition HD Audio™, for exceptional performance during calls, audio distribution, and pages. In addition, the eSeries provides extremely fast connect times and low latency during all-call pages. Audio between eSeries devices is non-blocking, allowing a virtually unlimited number of audio channels across the LAN and reducing or eliminating busy signals. By combining the eSeries eStation, Administrative Console, Desktop Microphone, and Amplifier, you can design a network intercom system that can be specifically customized and scaled to suit the requirements of your facility. 1 www.mytelecor.com eSeries eStation The Telecor eSeries eStations are Power-over-Ethernet-based wall intercom stations used to communicate between specific areas of a facility. The eStations are available in zero, one, two, and three-button models, and can be flush or surface mounted on a wall. PUSH TO CALL PUSH TO TALK PUSH TO CALL PUSH TO TALK CANCEL Status eSeries ™ Status eSeries Status eSeries ™ ™ Status eSeries CANCEL ™ Standard Features • • • • Full-featured, non-blocking intercom system Receives pages Station status and call indicator LED Relay output for control of ancillary devices (eSTN-0, eSTN-1 and eSTN-3 only) • • • • Tamper-proof user buttons Vandal-proof speaker assembly Rugged 11 gauge stainless steel face plate Powered by Power over Ethernet (PoE) Just Plug It In Audio Constructed to withstand physical damage and the stress of everyday wear-and-tear, the eStations feature rugged 11 gauge stainless steel faceplates. The buttons are tamper-proof and the overall assembly is designed to be vandal-proof. The eStations are fault tolerant with features like call roll-over so that an unanswered call to a primary destination is automatically redirected to a secondary destination. If both the primary and secondary call destinations are unavailable, the call is automatically redirected to a back-up call destination. Ceiling Speaker eStation The Ceiling Speaker eStation is an 8” diameter round loudspeaker intended to be placed in locations such as hallways or large common areas that do not require talkback. Like all eSeries eStations, these speakers can receive live or digitally stored announcements audio programs, and pages from a Master Station. It also has a station status LED indicator. Zero Button eStation The Zero Button eStation is intended for use at locations that only need to receive calls or pages. When these eStations receive a call, two-way communication is automatically established. Additionally, Zero Button eStations also have a station status LED indicator and a dry contact output. 2 Status One Button eStation The One Button eStation has a Push To Call button that can be used to call another eStation or an Administrative Console. One Button eStations also have a station status LED indicator and a dry contact output . PUSH TO CALL Status eSeries ™ Two Button eStation The Two Button eStation features a Push to Talk and a Cancel button. These eStations are able to receive calls and can be configured to make pages over loudspeakers and other eStations. The Push To Talk button is used to answer calls and control the talk/listen function while the Cancel button is used to end the call or zone page. When idle, a page can be distributed by pressing and holding the Push To Talk button. In addition to a station status LED indicator, the Push to Talk and Cancel buttons have additional LEDs to provide a visual indication of pending calls. Two Button eStations can activate the dry contact on a remote eStation, ideal for unlocking doors. PUSH TO TALK CANCEL Status eSeries ™ Three Button eStation PUSH TO CALL The Three Button eStation has a Push to Call, a Push to Talk, and a Cancel button. These eStations are able to answer calls using the Push To Talk button which also controls the talk/listen function. Three Button eStations can also be configured to make pages to loudspeakers and other eStations. The Push To Call button is used to call another eStation or an Administrative Console. The Cancel button is used to end the call or zone page. Three Button eStations have a station status LED indicator and additional LED indicators for the Push to Talk and Cancel buttons. These eStations also have a dry contact output. Three Button eStations can activate the dry contact on a remote eStation. Receieve Intercom Calls Receieve Pages Make Calls Place Call-Ins Ceiling Speaker Zero Button One Button Two Button Three Button 3 Receive Call-Ins Make Pages PUSH TO TALK Status eSeries CANCEL ™ Dry Contact Output Can Activate Contact Closure www.mytelecor.com eSeries eConsole The eSeries Administrative Console is a desktop master station that adds flexibility to Telecor’s eSeries next-generation full featured intercom system. Using the eConsole, you can quickly establish high-definition two-way voice communication with any other eSeries Console or Wall Station. It is also able to page any of 32 paging zones which can include any combination of other Consoles, Wall Stations, or Ceiling Speakers. The Console can also manage call-in from other stations, and control tone distribution, the playing of pre-recorded audio files, and distributing audio programs from other sources. Standard Features May 7, 20 13 e300 ↑ • Place or receive calls to any other eStation or Console on LAN • LCD screen, 2 lines with 20 characters each • Displays source of incoming calls • Standard keypad and function keys • Powered by Power over Ethernet (PoE) • Automatic enabling of VOX with handset use • Speakerphone Push-to-Talk button operation • Call forward and transfer features • Crystal clear high-definition speech quality for Just Plug It In optimum intelligibility • Easily activate pages, program distribution, announcements or tones • Digital volume control for both handset and speaker • Paging microphone connection 15:27:07 1000 ↓ ESC FORWA RD/ DISPLA Y CALLS X REDIAL PAGE ALL SOURCE SELECT ED ROOMS HOLD CANCEL / CLEAR SPEAKE R PHONE PTT/ ENTER Audio The eConsole’s LCD screen displays information about incoming calls in the order they are received. Using the feature keys, you can scroll between calls and select one to answer. Voice communication can be conducted through the telephone-style handset, or through the built-in speaker using the Push to Talk key to toggle between talk and listen modes. Using the eConsole’s feature keys, you can also initiate a live page to all devices, or to a select group of devices. With an eAmplifier connected to the network, you can trigger audio program distribution, manage live announcements from a remote microphone, activate alert tones, or play pre-recorded audio files. 4 MCC-PM-MA Desktop Microphone For additional flexibility, connect the eSeries Desk Microphone to the eConsole. The ruggedly-built microphone adds the ability to quickly page a single zone at the touch of a button. It provides additional pushbuttons for digital volume control, push to talk, call cancel, forwarding, and activating a headset speaker/microphone. Additional inputs are provided to connect a footswitch and headset. The microphone is mounted on a semi-rigid gooseneck arm that can be positioned comfortably. A ring LED around the microphone provides clear indication when the microphone is live, and is a prominent visual indicator when a call-in is waiting to be answered. Standard Features High quality gooseneck microphone Call Forwarding Single zone page button Digital volume control Headset jack Footswitch control input Illuminated microphone status Highliy visible indication of pending calls Ceiling Speaker eStations Radio 3 Zone Local Microphone PUSH TO TALK Status PUSH TO CALL CANCEL Status eSeries Status eSeries ™ ™ 1000 HOLD GAIN eINPUT INPUT 1 INPUT 2 4 3 2 1 STATUS POWER TONE / ANNOUNCEMENT FORWARD/ DISPLAY CALLS REDIAL PAGE ALL SOURCE CANCEL/ CLEAR +6 dB 0 dB -6 dB -12 dB eAMP eAmplifiers ESC X TONE SILENCE PoE LAN Switch 15:27:07 ↓ LOCKED OUT May 7, 2013 e300 ↑ TROUBLE 1 2 Paging Speakers SELECTED ROOMS SPEAKER PHONE ™ GAIN eINPUT INPUT 1 INPUT 2 4 3 2 1 STATUS POWER -6 dB TONE / ANNOUNCEMENT eConsole FIRE ALARM PANEL PUSH TO CALL PUSH TO TALK eSeries +6 dB 0 dB -12 dB eAMP PUSH TO CALL Status TONE SILENCE Desktop Microphone LOCKED OUT PTT/ ENTER TROUBLE • • • • • • • • Status CANCEL eSeries ™ Status eSeries Dry Contact Input (E.g., Fire Alarm System) ™ eStations 5 Local Audio Input (E.g., CD Player) www.mytelecor.com eSeries eAmplifier 0 dB -6 dB GAIN +6 dB eINPUT INPUT 2 INPUT 1 4 3 2 1 TONE SILENCE LOCKED OUT TROUBLE STATUS POWER The eSeries Amplifier is a cost-effective way to expand the public addressing capabilities of Telecor eSeries next-generation full featured intercom system. The eAmplifier is ideal for decentralized cable and cost-saving installations. Using the eAmplifier, you can make paging announcements or broadcast audio from a source in crystal-clear high definition. -12 dB eAMP TONE / ANNOUNCEMENT Standard Features • • • • • • • • • • • Adds conventional speaker paging and public address to eSeries Intercom System Receives Audio Signals Over LAN Two microphone/line level audio inputs Four contact inputs for manual tone or audio file playback control Audio Level and Status Indicators 25V/70V/8Ω audio outputs One line level audio output with automatic contact closure queuing Supports external supplemental audio amplifier for higher loads Crystal clear high-definition speech quality Audio Class-D design, optimized for high efficiency Short-circuit and overload protected The eAmplifier is a 25 watt amplifier that adds paging and public address capabilities to the eSeries Intercom System. It is designed to receive audio signals from either the eSeries network or a local input and broadcast them over conventional speakers and/or back into the eSeries network for broadcast to other eSeries devices. It also has the ability to store and play pre-recorded announcements or tones to its speakers or over other eSeries devices connected to the network. Each eAMP provides one zone of paging. For larger applications, multiple eAMPs can work co-operatively on the network to support a comprehensive zone paging system. The eAmplifier provides the ability to store and play audio files that can be activated from a contact closure or from the Administrative Console. It also includes a built-in tone generator, making the eAmplifier ideal for interfacing with building management systems to automatically or manually broadcast alarms and emergency announcements over loudspeakers in crystal-clear high-definition audio. The eAmplifier provides two inputs that can be independently configured for either connecting a microphone or line-level input, such as a CD player or radio. The eAmplifier provides an audio output point for connecting standard 25V/70V/8Ω speakers. 6 www.mytelecor.com eSeries eClock The Telecor eSeries eClock emphasizes plug-and-play design and minimum configuration to ensure ease of installation, use, and maintenance. The eClock combines Telecor's reliable and trustworthy digital clock design with Power-over-Ethernet technology. This allows for simplified wiring and network planning because the eClock obtains both power and data from a single CAT5 Ethernet cable. All you need to do is Just Plug It In Standard Features • Supports automatic nighttime dimming schedules • 12 and 24 hour modes • 2.5" and 4" display models • Flush, surface, and dual-face mounting options • Wide viewing angle • Anti-reflective cover to optimize readability • Requires NO IP address, DHCP server, subnet, or masks configuration • Four-digit (HH:MM format) time display • Power-over-Ethernet driven • Synchronizes with Server PC running the Telecor Ethernet Time Server Software • Elapsed and count-down timer capabilities controlled by button panel or external contact closure • Automatically broadcasts “BELL” or “FirE” contacts from one eClock to other eClocks for emergency notifications Timekeeping is automatically synchronized between eClocks and managed by an ePort or the Telecor Ethernet Time Server Software which can be installed on any computer on the LAN. The Telecor Ethernet Time Server Software is a program that runs in the background to synchronize all eClocks on the network. If any eClocks lose their connection to the network, they will independently keep the time. Once the connection is re-established, the clocks will automatically re-synchronize with the network. Server PC with Telecor Ethernet Time Server Software PoE LAN Switch 7 Simple Settings, Programming, and Service Just Plug It In The eSeries Network Intercom System is designed to avoid complicated network configuration and management. When creating an intercom and/or paging network using eSeries devices, you do not need to worry about DHCP servers, IP addresses, subnets, or masks. ePORT Laptop/PC The eSeries devices are shipped with default settings that make them functional out-of-the-box upon being plugged into the LAN. However, using an eSeries ePORT, it is possible to make simple setting adjustments or programming changes. The ePORT is a device that plugs into a computer via USB and into the LAN that the eSeries devices are connected to. Network Switch Simple setting changes can be made to the eSeries devices by using the ePORT and included managagement software to access individual devices. Using this method, you can change eStations the devices’ names, dial numbers, and page zones. Devices capable of making call-ins or pages (eStations and eConsoles) can be set with call-in and page zone destinations. Storing pre-recorded announcements on eAmplifiers is also performed using the ePORT. May 7, 2013 e300 ↑ 1000 ESC FORWARD/ DISPLAY CALLS X REDIAL PAGE ALL SOURCE SELECTED ROOMS HOLD Status eSeries 15:27:07 ↓ SPEAKER PHONE CANCEL/ CLEAR PTT/ ENTER ™ eConsole PUSH TO CALL Status eSeries ™ PUSH TO TALK CANCEL Status In the USA 2434 Jerauld Avenue, Niagara Falls, New York, 14305 tel: (716) 285-8272 fax: (716) 285-8287 In Canada (Corporate) 1114 Westport Crescent, Mississauga, Ontario, L5T 1G1 tel: (905) 564-0801 fax: (905) 564-0806 Copyright © 2014 by Telecor Incorporated. Telecor and the Telecor logo are Registered Trademarks of Telecor Inc. All product information subject to change without notice. 8 GAIN eINPUT INPUT 1 INPUT 2 4 3 2 1 STATUS POWER +6 dB 0 dB -6 dB -12 dB eAMP PUSH TO CALL PUSH TO TALK Status eSeries TONE SILENCE ™ LOCKED OUT If you need to make changes to a number of devices spanning the entire network, you can download the programming data of all devices on the network to your computer. This data is saved in a single file which can be opened and edited using any spreadsheet program. Once all programming changes have been made in the file, uploading the file using the ePORT will update the programming of all devices on the network. This avoids the repetitive programming of devices and instead allows you to quickly and easily make programming changes to multiple devices simultaneously. This method also lets you make changes to other features such as roll-over timers and call tone intervals. Since all of the programming can be downloaded to a single file, it is easy to backup device configuration for future restoration. eSeries TROUBLE Status ™ CANCEL Ceiling Speaker www.mytelecor.com Rev 0.0 ETS-2822 E:\T4-00\T4-V00-A.pdf TONE / ANNOUNCEMENT eAmplifier