Transcript
333504C
Mobile Lubrication Library
Telehandler Loadall Suggested automated lubrication system layout for Telehandler Loadall Kit No.: 24R378, G3, USP, 21PT Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all related manuals. Save all instructions.
Manual No. Manual Title
Fluid leaks from incorrectly installed or ruptured components, and/or failure to verify the components are properly installed and tested, can result in serious injury such as fluid spraying in the eyes or on skin and fluid injection, or equipment damage.
3A0414 3A0525 3A0528 3A0860
To prevent injury or equipment damage, installation must be done by a professional and tested prior to use. Consult Parker literature for specific hose assembly instructions. These instructions are available from your Parker representative or at www.Parker.com/pdf.
Related Manuals G3 Pump Pressure Relief Valve Remote Manual Run USP Valves
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to replace the installation and maintenance instructions provided by the original equipment manufacturer.
Mobile Lubrication Library
Suggested Lube Points USP Valves
Mobile Lubrication Library
LUBE POINT INFORMATION Lube Point USP Outlet 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
5 6 1 2 3 4 5 6 7 8 1 2 3 and 4 5 6 7 8 1 2 3 4
Bearing Description King pin upper right King pin lower right King pin upper left King pin lower left Steering arm left Steering arm right Boom pivot left Telescope ram rear Upper compensating ram Main lift boom cylinder upper Boom pivot right Main lift boom cylinder lower Lower compressing ram King pin upper right King pin lower right Steering arm right Trunion right King pin upper left King pin lower left Steering arm left Trunion left
USP Block SB#2 SB#2 SB#2 SB#2 SB#2 SB#2 SB#3 SB#3 SB#3 SB#3 SB#3 SB#3 SB#3 SB#4 SB#4 SB#4 SB#4 SB#4 SB#4 SB#4 SB#4
USP Volume Dispense Single Single Single Single Single Single Single Single Single Single Single Single Double Single Single Single Single Single Single Single Single
Mobile Lubrication Library
24R378: Recommended Kit Parts List Part Number 96G099 571036 571028 24E406 24E407 571032 24N007 16U586 556773 556763 555749 557393 556402 557349 16U587 15K783 127009 16U982 16U933 24F467 557944 128006 563178 127013
Description PUMP, G3-G-12MX-4L0L00-UDMVA1R2 (see manual 3A0414) KIT, accessory, cover KIT, accessory, pressure relief (see manual 3A0525) KIT, valve, USP, 6 outlet (see manual 3A0860) KIT, valve, USP, 8 outlet (see manual 3A0860) KIT, remote manual run, 12V, w/ cable (see manual 3A0528) KIT, accessory, mounting, USP, 6-8 KIT, accessory, hose, 100 ft HOSE, end female swivel SAE 4 JIC FITTING, 4 JIC 1/8 pm CONNECTOR, 4 JIC 1/8 pm COUPLING, 1/8 fp x 1/8 mp x 1-1/4 HEX FITTING, 1/4 x 1/8 nptf hex PLUG, dryseal 1/8 nptf KIT, accessory, guard, scuff, 75 ft FITTING, elbow, street, 1/8 TIE, cable, 14.75’ x .31” black KIT, accessory, hose, 200 ft KIT, accessory, guard, scuff, 160 ft PLUG, USP, doubling plug CLAMP, 7/16, tube 4TS6-14002 CLAMP, hose, .375 OD hose COUPLING, extension 1/8 female to 1/8 male FITTING, swivel, JIC 37D size #4
USP VALVES* AND ACCESSORIES Part Number 24E408 24E409 24E410 24E411 24N008 24N009 *see manual 3A0860
Description KIT, valve, USP, 10 outlet KIT, valve, USP, 12 outlet KIT, valve, USP, 14 outlet KIT, valve, USP, 16 outlet KIT, mounting bracket, 10-12 outlets KIT, mounting bracket, 14-16 outlets
Qty 1 1 1 2 2 1 4 1 8 25 30 21 1 4 1 5 4 1 1 4 20 20 4 42
Mobile Lubrication Library
Typical Pump Installation
Manual Run Button
Pressure Relief
To Fuse/Power
To Lube Points G3 Pump
USP Valve
Mobile Lubrication Library
Graco Information For the latest information about Graco products, visit www.graco.com. TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents. Original information. This manual contains English. MM 333504
Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001. www.graco.com August 2013, revised April 2015
