Transcript
Telematics Gateway C300 V1 3G Hardware User Manual
CONTENTS 1. INTRODUCTION --------------------------------- --------3 1.1 Scope----------------------------------------------3 1.2 Audience------------------------------------------3 2. PRODUCT DESCRIPTION AND SAFETY---------4 2.1 Electrical connectors ----------------------4 2.1.1 Pinning Description----------------------6 2.2 Battery ------------------------------------------------6 2.3 Flammability------------------------------------------7 2.4 Telematics gateway-Description--- ---- ---------8 2.5 Product specification-------------------------------9 2.6 Product installation-------------------------------9 2.7 Product Label ----------------------------------------9 3. ABBREVIATION------------------------------------------10
1. INTRODUCTION 1.1.
Scope This manual presents the hardware features and functions of C300 V1 3G, assisting you in the safe or accurate operation in the vehicle.
1.2.
Audience This manual is intended to owners or drivers without professional or specialised knowledge on C300 V1 3G.
2. PRODUCT DESCRIPTION AND SAFETY 2.1 Electrical connectors
Picture not contractual
GSM antenna : CN1002 The cable from roof mounted GSM antenna is connected to this port to ensure GSM connectivity.
GPS Antenna : CN1001 The cable from roof mounted GPS antenna is connected to this port to ensure GPS connectivity. USB : CN1004 The other end of the cable can be plugged into another ECU of the truck/bus.
Main Connector : CN1000 The main 30 pinned connector, facilitates the electrical and communication essentials of C300 V1 3G, with Vehicle electrical system.
2. PRODUCT DESCRIPTION AND SAFETY 2.1 Main connector Pining Description
2.2. Connecting the product to Power supply VBAT must be connected to Pin 1 and GND to pin 15 of the Main Connector and GND to pin 15. F01:Power supply F15:GND
2.2 Battery C300 V1 3G has a rechargeable battery, accessible behing a trap door. Replacement of the battery must be done by a trained maintenance technician. Screws
Battery trap door
Safety Tested according to: Short circuit at RT and at +55 C UL, UN, IEC Thermal abuse at +130 C UL, IEC Overcharge & Forced Discharge UL, UN, IEC Impact UL, IEC Crush UL, UN, IEC Shock and vibration UL, UN, IEC Temperature Cycling UL, UN, IEC UN Manual of Tests and Criteria 38.3, UL 1642, IEC 62133
2.3 Flammability
PCB : UL 94-V0 Plastic Housing : UL 94-V0 Main connector : UL 94-V0 Connector USB :
Connector GSM, GPS :
Design of plastic housing with a wall just behind the connectors preventing flame propagation.
2.PRODUCT DESCRIPTION
AND SAFETY
2.4 Description C300 V1 3G is a n o n - b o a r d u n i t used for d a t a logging and communication between the vehicle and truck/bus server. The telematics gateway will transfer the information to support the vehicle r e l a t e d s e r v i c e s . To e n a b l e t h e communication to the truck/bus server C300 V1 3G services must be activated.
GSM-Communication: C300 V1 3G h a s a n integrated GSM module for the data comm unication to and from the vehicle. C300 V1 3G can have up to 2 soldered eSim. The GSM antenna is placed on the truck roof (combined GSM/GPS).
Picture not contractual
NOTE Do not place any metal objects over the antenna on the roof.
NOTE Do not place any other transmitting antennas closer than 30 cm from the GPS/GSM. Picture not contractual
The system consists of:
GPS Satellite positioning
1. 2
1. 2. 3. 4. 5.
C300 V1 3G Antennas (GPS, GSM)
Antenna Satellite GPS, GSM connectors C300 V1 3G
C300 V1 3G can determine geographic position through GPS -positioning. The GPS unit calculates the position. with the help of signals from at least three satellites. The accuracy of calculation increases as the number of satellites the GPS unit is in contact with the vehicle’s system.
2. PRODUCT DESCRIPTION AND SAFETY WLAN and Bluetooth Communication: C300 V1 3G h a s a n integrated WLAN/Bluetooth module for the data c o m m u n i c a t i o n t o a n d f r o m t h e vehicle for remote warehouse applications. The WLAN and the Bluetooth antenna are 2 separate antennas located inside the C300 V1 3G.
2.5 Product specification Product Features
GSM 3G : Emission frequency bands : GSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz UMTS Quad band, 800/850/900/2100MHz Reception frequency bands : GSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz UMTS Quad band, 800/850/900/2100MHz UMTS Rx diversity: Quad band, 800/850/900/2100MHz
Operating frequency
Equivalent Radiated Power isotropic : Class 4 (+33dBm ±2dB) for EGSM850 Class 4 (+33dBm ±2dB) for EGSM900 Class 1 (+30dBm ±2dB) for GSM1800 Class 1 (+30dBm ±2dB) for GSM1900 Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV Class 3 (+24dBm +1/-3dB) for UMTS 800, WCDMA FDD BdVI WLAN: 2412 ≤ f ≤ 2472MHz 5180 ≤ f ≤ 5825MHz BLUETOOTH: 2400 ≤ f ≤ 2485 MHz
Physical Characteristics Dimensions
140.6 x 160.2x 40.3 mm
Mounting
Slides on a metallic bracket and latches in with a clip. Mounting position will vary with respect to the truck model.
Weight
401 grams
Environmental Parameters Operating Temperature -40°C to +70°C Storage Temperature -40°C to +85°C Operating Voltage 10V to 36V
2.6
Product installation
No fuse is enclosed in the product. Thus an external 10A protective fuse shall be installed outside of the unit, between the truck battery and the unit, on the power supply lines. The equipment is intended to be installed in restricted access locations, with at least 20cm or more away from person’s body. For ADR vehicles: Power supply lines shall not bypass the ADR battery master switch.
2.7Product Label
3. ABBREVIATIONS ADR
Accord européen relatif au transport international des marchandises Dangereuses par Route ( Dangerous goods transportation European regulation )
BAT
Battery
CAN
Controller Area Network
CTRL
Control
CTS
Clear to Send
DCD
Data Carrier Detect
DR
Drive
DSR
Data Set Ready
GND
Ground
GPS GSM R RI SIM WLAN
Global Positioning System Global System for Mobile Communications Radio Ring Indicator Subscriber Identity Module Wireless Local Area Network
