Preview only show first 10 pages with watermark. For full document please download

Telescoping Security Pipe Accessories By Models Tp150-0912,tp150-1218, Tp150-1824, Tp150-2430

   EMBED

Share

Transcript

Accessories by A division of David Engineering & Mfg. Inc. TELESCOPING SECURITY PIPE MODELS TP150-0912,TP150-1218, TP150-1824, TP150-2430 Thank you for purchasing the PDR 1.5” NPT telescoping pipe with security locking features To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place for future reference. All PDR accessories carry a limited lifetime warranty against defects in material and workmanship. We are not liable for improper installation that results in damage to accessories, mounts, adapters, or presentation equipment. Special techniques are necessary for installation of the telescoping security pipe. Do not attempt to perform this work by yourself. Request an installation specialist to install this unit. Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling. To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the projector and the mount. Fully tighten all of the mounting screws as specified in the instructions. Features Complete security features (anti-theft) Adjustable 1 ½” NPT Telescoping Pipe Simple to adjust, security screws included Security locking tool included Security locking screws MODEL 0912= 12” MODEL 1218= 18” MODEL 1824= 24” MODEL 2430= 30” MODEL 0912= 9” MODEL 1218= 12” MODEL 1824= 18” MODEL 2430= 24” Total load of Telescoping Security Pipe Maximum weight - 500 Lbs (227 Kg.) 1 INSTALLATION INSTRUCTIONS 1. Loosen height adjustment security set screws. See Fig 2 2. Twist and adjust to desired height. Tighten height adjustment security set screws. See Fig 3 3. Install and tighten stabilizer screws. (item 5) Fig 2 MODEL 0912= 9” MODEL 1218= 12” MODEL 1824= 18” MODEL 2430= 24” Fig 3 HEIGHT ADJUSTMENT SCREWS (ADJUSTMENT SLOT) MODEL 0912= 12” MODEL 1218= 18” MODEL 1824= 24” MODEL 2430= 30” (item 5) STABILIZER SCREWS REV 091508 2