Transcript
SPECIFICATIONS SHEET
PSW8 IN-WALL SUBWOOFER
8" SW Passive In-wall Subwoofer • Baffle-mounted low pass crossover control, 100Hz or 140Hz • Baffle-mounted high pass crossover control, bypass or 140Hz
IN-WALL LOUDSPEAKER
8" In-Wall Subwoofer Woofer Technology ■ 8" Injection-molded TCC (talc, carbon, and ceramic-filled) cone is extremely rigid to reduce breakup and lower distortion ■ Butyl rubber cone surround damps resonance and provides exceptional durability ■ High BL magnet structure with dual voice coils and vented pole piece insures powerful bass response ■ Inverted dust cap increases stiffness-to-mass ratio and reduces distortion Crossover Controls ■ Baffle-mounted low pass crossover control adjusts filter settings at 100Hz or 140Hz ■ Baffle-mounted high pass crossover control selects filter bypass or 120Hz setting
PSW8
Specifications ■ Impedance: 8 ohm single/stereo; 4 ohm with voice coils paralleled for full mono output ■ Recommended amplifier power: 10W to 150W
Stock Number
■ Frequency response: 35Hz-140Hz +/-3dB
FG00894
■ Sensitivity: 89dB for 2.83V pink noise
PSW8 requires 8 Series Bracket
■ Frame dimensions: 10-3/16" x 14-1/4"
Kit for installation. Use FG00321
■ Hole cutout dimensions: 9-1/8" x 13-1/8"
or FG00899 (sold separately)
■ Depth behind ceiling: 3-3/4" (based on 1/2" drywall) Warranty: Five-year limited Shipping weight: 10 lbs.
Technology ADVANCED MATERIAL SCIENCE Elevates performance of sub component parts like woofer cones, tweeter diaphragms and crossover components
SOPHISTICATED MOTOR AND MAGNETIC DESIGN Including dual voice coils, vented pole pieces and High BL magnet structure for deep bass response
ACOUSTIC FINE TUNING Baffle mounted low pass and high pass filter adjustments optimize sound for every system and room configuration
ANTI-RESONANT WAVE-BRACING TECHNOLOGY prevents transmission of woofer vibrations to the baffle and into the drywall for clear and dynamic bass response
Details HOME THEATER SPECIFIC MODELS Deliver voice-matched cinema performance and are compatible with all Niles Loudspeaker models
SNAP-IN SPEAKER-BAFFLES Greatly reduces installation time and cost
MODULAR MOUNTING SYSTEM Uses innovative mounting technique to simplify installation and ensure uniform contact with wall
BLACK BAFFLES Deliver a seamless appearance after the speakers are installed and the grilles are in place
MICROPERF™ RUSTPROOF ALUMINUM GRILLES Are acoustically transparent yet won’t rust or discolor
DEBRIS SCREENS Block unwanted debris such as fiberglass insulation, sheetrock chips, or other foreign matter from coming in contact with the woofer cone
NILES AUDIO CORPORATION 12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 – www.nilesaudio.com ©2004 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation.
NAPSW8PDF
