Preview only show first 10 pages with watermark. For full document please download

Tender Documents

   EMBED


Share

Transcript

VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI BARKI TENDER DOCUMENTS Estimated Cost: Rs. 980,000 Price Rs. 1000/- Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI TERMS & CONDITIONS FOR PURCHASES / PROCUREMENTS UNDER TENDERING / BIDDING: Firm Name: M/s_________________________________________________________________________________ Proprietor Name:______________________________ NTN #:_______________________________________ NIC #._________________________________ Sales Tax #.___________________________ Address:_____________________________________________________________________________ Ph. #:_________________Cell # ______________ Conditions: 1- General i. Any offer which is not received as per terms and conditions of the tender enquiry is liable to be ignored. No offer shall be considered if: a. Received without earnest money. b. It is received after the time and date fixed for its receipt. c. The tender is unsigned d. The offer is ambiguous e. The offer is conditional f. The offer is from a black listed firm. g. The offer is received by fax or e-mail h. Offer received with shorter validity than required. i. The offer is not conforming to specifications indicated in the tender enquiry. j. The tender documents are not signed by the supplier or his authorized person(s). Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI ii. iii. iv. v. vi. vii. viii. ix. x. xi. xii. xiii. xiv. Offer must remain valid for at least 90 days from the date of opening the tender. The covering letter should indicate particulars of tender, and date of opening. The envelope must be properly sealed. The purchaser reserves the right to purchase full or part or ignore / scrap / cancel the tender without assigning any reason(s). The earnest money / security shall be forfeited if: a. The acceptance of tender is not issued during the validity period by the successful bidder within stipulated time period. b. The offer is withdrawn, amended or revised during the validity period of the offer without approval of the buyer. c. The contractor fails to execute the contract strictly in accordance with term and condition of the tender, and the purchaser reserves the right to purchase the same from the market and difference of price will be recovered from the contractor. The tenderer shall enclose catalogues / leaflets / literature and other technical information, if any, in respect of items offered by him. The contractor will be responsible for the free replacement of items if the same is found to be substandard by the purchaser and or at variance with the specifications given in the tender enquiry. Items offered of a specification superior to the one specified in the tender enquiry may be accepted by the purchaser. Where offers have been invited for specified brands, offers of other brands shall not be acceptable. Items should be brand new and in original manufacturers packing. One year free service and supply of spare parts must be guaranteed by the bidder. The tenderer should indicate their National Income Tax & Sales Tax Number. The tenderer will produce documents if required by purchaser to ensure that store supplied is brand new and in original packing of manufacturer. The quoted price should clearly indicate whether it includes taxes or not. The purchaser is entitled to deduct all prevailing taxes. There is no restriction to submit partial bids. 2. Technical Advice The VTI, Barki may seek technical advice for vetting tender offers from any person having appropriate knowledge / experience in the relevant field. 3. Bids will be evaluated in term of technically and financially. The Purchaser has the authority to reject the lowest bidder if the quoted material has been Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI found the low quality and not fulfilling the required results, which are expected for better quality results. 4. Delivery of Items/Completion of Civil Work Delivery of Items must be insured within 20 days after purchase order and civil work must be completed in 45 days after issuance of work order/ purchase order. 5. Inspection of Items Inspection of the delivered item shall be conducted by purchase committee, which has a technical member especially for this particular purchase, before its acceptance. 6. Payment to the Contractors i. Payment of the amount will be made through crossed cheques to the supplier against invoice submitted to the Principal VTI after 100% completion of delivery, installation / commissioning and satisfactory performance. President DBOM / Principal VTI will determine the status of the completion of supply and issue instructions for payment. ii. No advance payment will be made. 7. Earnest Money Earnest money @ 2% of the estimated cost of the tender will have to be deposited along with tender. It should be in the form of Bank Draft / Call Deposit in favor of “Principal Vocational Training Institute Barki. Earnest money shall be refunded on successful completion of the contract. The earnest money furnished by the firm may be retained for adjustment of the amount due against the firm in case the said firm is defaulter against any other contract. 8. Refund of Security Deposit Security deposit shall be refunded to unsuccessful bidders within 15 days after the award of the contract. 9. Deduction of Taxes Income and other taxes will be deducted while making payment as per Government instructions / notifications. 10. Payment of Sales and other Taxes Purchase should be made from the firms registered with sale & income tax Departments. 11. Performance Bond One-year performance bond in shape of bank security equivalent to 10% of the total contract price will have to be furnished at the time of delivery of equipment. 12. Termination of Contract The competent authority may reject all bids or proposals at any time prior to the acceptance of the bid or proposal. The competent authority shall upon request Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI communicate to any contractor or consultant who submitted a bid or proposal, the grounds for rejection of all bids and proposals. 13. Income and GST Income tax will be deducted as per rules and GST @ 17%, if applicable will be the responsibility of the firm. 14. Submission of Tender Last date of submission of the tender is 27/04/2016 at 12:00 PM in the office of “Principal Vocational Training Institute Barki. 15. Opening of Tender Date of opening the tender is 27/04/2016 at 12:30 PM, in the office of Principal Vocational Training Institute Barki. Tender will be opened in the presence of all parties / their representatives. Principal VTI Barki Encl: All list of items are attached. Note: 1) The rates should be quoted only for the items having specifications as per lists attached. 2) The quoted rates with changes specifications will not be considered. 3) Company printed letter head page used for quoting the rates. Name & Address of Firm Signature ______________________ Name __________________________ Stamp _________________________ Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI Cell No._________________________ Tele No. _______________________ Fax No. __________________________ NTN _________________________________ Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI Estimated cost for Dress Making Trade S. No. Items 1 Sewing Machine with table &tool kit 2 3 4 Over Lock Machine with table & Tool Kit lock stitch machine with table & Tool Kit Discmatic Machine with table & Tool Kit 5 Computerized embroidry Machine With table & tool Kit 6 Iron table 7 Electric Iron 8 Measuring & Cutting (scissors) Tools etc 9 10 Instructor Table Instructor Chair 11 Student Chair (arm less) sample require 12 13 14 15 White Board Wooden case Cutting& Marking Table Steel Almirah Specification Estimated Cost electric moter, Built in embroidery attachements/Leaver Imported imported imported imported Stander size complete wooden with two draws and locable doores National or Phelips meters, Gazz. Tape and scissors of different sizes. one set for each trainee As per Drawing As per Drawing Size = depth 450x width 470mmx hight 780mm seat 430x450 8strip wooden. Back 430x170 3no wooden stripc just like tablet chair As per Drawing As per Drawing As per Drawing As per Drawing RS. 290,000 Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI BEAUTICIAN Sr. # Description / Specifiction of Items 31 Beauty Saloon Hydraulic Chair (Workstation) Hair Dryer Hair Styling Rod Electric Hair Blender Hair Steamer Facial Massager Section Pins (5 Dozen --01 job) Cleaning Brush Hair Scissors Cutting set (10 sets) Plucking Instruments Showers Bottle Wax Machine Hair Straightner Laser Machine (Skin and Hair) Massage Bed Pedicure Machine Paraffin Wax Container Cutting Razer Bender Stick (packets) Sponch (Packets) Foot’s (Mani Cure + Pedi Cure Machine) (1+1) Facial Steamer Electric Rollers( Box) Instrument Tray Electric Air Freshener Hair Iron CD for Make-up + Hair Styling + Hair Cutting + Fitness (I for each) Air Conditioner 1.5 ten split Crimping Iron Volume Iron Rebounding Iron 32 Instructor Table (as per drawing) 33 Instructor chair(as per drawing) 34 Revolving Chair (just like of Computer)(as per drawing) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Estimated Cost RS. 270,000 Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 35 Steel Almarah(as per drawing) 36 Wood work ,Shelves and mirrors( suitable length for 32 trainees and available room) 37 White Board (suitable Size)(as per drawing) Repair & Maint. Electrical Appliances S.No. 1 2 Description Estimated Cost LARGE PANNEL(15 amp circuit breaker 3-pole,star delta megnatic contactor rating 15 amp 400 volt 50 Hz,timer 15 amp,15 realy ,ampere meter 60 ampere 400 volt 50 Hz,volt meter 500) volt 50 Hz. MULTIMETER ANALOG(Highly sensitive and highly accurate multimeter in handy , compact housing Backlight function 20 Ranges in 6 functions AC / DC Voltage measurement?up to 1000V(±3% full scale) DC current measurement?up to 10A(±3% full scale) Resistance measurement: up to 20M ohm(±3% full arc) Acoustic continuity check Transistor Polarity Judgment Test Fuse: 500mA 250V 10A 250V EN61010 CAT III 600V Dimensions: 102x150x45mm Weight: 370g incl. batteries) 3 MERGER METERSpecifications Insulation Nominal test voltages 50 V, 100 V, 250 V, 500 V, 1000 V Insulation resistance range 100 GΩ Range Full Scale Accuracy 1000 volts ±3%, ±2 digits, ±0.2% per GΩ Short Circuit Current 2 mA +0% -50% Terminal voltage -0% +20% ±1 V Leakage Current 10% ±3 digits Voltage display 3% ±3 digits ±0.5% of rated voltage Accuracy: ±3% ±2 digits (0 to 100 Ω) Open circuit voltage 5 V ±1 V Lead resistance zeroing Up to 9.00 Ω Accuracy ±3% ±2 digits Open circuit voltage 5 V ±1 V Short circuit current 20 µA ± 5 µA Voltage range 0 to 600 V d.c. ±2% ±2 digits 4 GALVANO METER, voltage sensitivety 10uV/div ± 10 %,maximum allowable input 5volt,220 volt ,5 amp RS280,000 Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 5 6 VOLT METER((18 Ranges and Functions Diode Overload Protected Meter AC/DC Voltage to 1000V Fused Resistance Ranges DC Current to 1A Single Enclosed Range Switch Drop Resistant, High-Impact Case) VOLT METER 300 V(18 Ranges and Functions Diode Overload Protected Meter AC/DC Voltage to 300V Fused Resistance Ranges DC Current to 0.5A Single Enclosed Range Switch Drop Resistant, High-Impact Case 7 SOLDERING IRON(150W)(Voltage 220-240V AC 50/60H Heater Ceramic Heater) good internal resistance and tempraure capacity 8 SOLDERING IRON (500w)(Voltage 220-240V AC 50/60H Power Consumption 500W Heater Ceramic Heater) 9 SOLDERING IRON (light work)(Voltage 220-240V AC 50/60H Power Consumption 100W Heater Ceramic Heater) 10 AMP METER (analog)Measurement Type: AC.220 volt,50 hz AC Current Range: 0.0 to 30 amps 11 AMP METER(digital)Description: 0.05% basic DC accuracy Diode check and continuity test 1000V input protection on all ranges 4-20 mA process loop measurements with % readout Backlit LCD readout with analog bar graph 40,000-count resolution Data hold, Max/Min recording mode Peak capture mode IP67 dust and waterproof Form Factor: Handheld Measurement Type: AC / DC DC Current Range: 0.0 to 10 amps AC Current Range: 0.0 to 100 amps 12 Watt Meter (analog & digital)Watt; Meter Range:0W to 75W; Meter Size/Dimensions:4.5 in.; Scale Length:89mm; Accuracy:+/-2 %; Barrel Size:2.83"; Display Accuracy ±:2%; Meter Movement: Dynamometer; Meter Shape: Rectangular Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 13 JUICER Body material:Plastic 220 volt,50 hz • Colour:White • Wattage:350W • Weight:1kg • Capacity:1.5L 14 GRINDER use with blenders (crasher)( 0.5-ltr,220 volt,50 hz.350 rpm 0.5 kg) 15 16 17 TOASTER Size (cm):16.5H x 22W x 15D Wattage:900W,volt : 220 Weight:1.9kg Functions 2 slice:Yes Adjustable browning control:Yes ELECTRIC KETTLE(Capacity: 1.5 ltr,Power: 1000,Voltage: 220,Material: Stainless Steel,Stainless steel housing, PP plastic parts.Feature: 360 Degree Rotational Base. FAN HEATER(Dimensions (w x d x h cm):22.0x16.2x30.5 Weight (Kg):0.8 Rated voltage/Frequency (V~Hz):230~50 Anti-frost function:Yes For rooms up to (m³):70 Handle:Yes Heating power - Max (W):2400 Heating power - Med (W):1400 Heating power - Min (W):800 Pilot light:Yes Room thermostat:Yes Silence function:Yes Summer ventilation:Yes 18 CELLING FANS 56'' size 56 inch ,voltage 230, frequency 50 Hz,power 80 watt.RPM 330,Air delievery m3/min 250 19 PEDESTAL FAN size 24 inch volt 230 ,HZ 50 Capecistor start, RPM 1450,watt 125 ,air delevery m3/min 170 20 EXUAST FAN size 300 mm ,12 inch,RPM 1350,Power 47 ,Air Delievery m3/min 21 Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 21 IRON 1000 watt (Cable Length ( 1.5 m) Soleplates Material Aluminum Voltage (V) 220,single phase,50 hz 22 WASHING MACHINE watt 450 ,RPM 300, frequency 50 Hz,voltage 220.water storage capecity 26 litr. 23 MAGNETIC CONTRACTOR 15 amp 3 phase 400 volt 24 25 26 27 28 29 30 DRILL MACHINE 450 watt 13mm 710 watt 220 volt 50 hz 2800 rpm SAND WITCH MAKER 500 watt 220 volt 50 hz metal body MOTOR 1/2 HP single phase 220 volt 2450 rpm 50 hz pure coper MOTOR 1 HP single phase 220 volt 1150 rpm 50 hz pure coper MOTOR 3 HP 3 phase 400 volt 2450 rpm 50 hz pure coper CLAMP ON METER digital AC A 400/600A Frequency [50/60Hz] AC V 400/750V resistanceΩ 400/4000Ω|±1.5% 9 volt battery PUSH BUTTON 15 amp 220 volt single phase plastic DC 400 volt 31 Hair Dryer 750 watt single phase 220 volt 32 Vacum Cleaner meduim size up to 2000 watt single phase 220 volt 50 hz 33 Iron 1000 watt single phase 220 volt 50hz 34 Emergency Light 20 watt single phase 220 volt 50 hz 35 Stick Blender 350 watt 3450 rpm single phase 220 volt 50 hz 36 Tester single phase 220 volt 3 watt lamp 37 Wire Brush size Set 220 MM, metrial metal 38 Club Hammer weight 1kg good wooden handle 18 inch 39 Screw Driver Set size 4-12 inch stainless steel 40 Screw Driver 12" Flat stainless steel 41 Screw Driver 4" flat stainless steel 42 Screw Driver 4" Philp stainnless steel 43 Hexagon Keywrench 6mm-10mm steenless steel Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 44 Drill Set HSS 19Pcs 1mm- 16mm 45 Drill Set 17 Pcs 1/32 - 3/8 material HSS 46 Bench Hammer weight 500 GM 12 inch good wooden handle 47 Blender 150 watt 220 volt AC, 600 ml capacity 48 Blender 800 watt 220 volt AC 3450 rpm ,1500 ml,Hz 50,stainless steel ,jug plastic 49 Blender 120 watt, 220 volt AC, 2800 rpm,HZ, 50,600 ml, 50 Single Pole Breacker 16 Amp 220-420 volt 51 Cable Cutter Plier size 8inch" , good insulation handle use up to 400 volt 52 53 54 55 56 Combination Plier 8" with good insulation handle use up to 400 volt Nose Plier 8" with good insulation handle use up to 400 volt Water Pump Plier 8-12 inch Pipe Wrench 18inch use up to 400 volt good insulation handle TOOL BOX SIZE 450X200MM metal sheet with two foldings 57 Combination Spaner Set 8-32 MM ,material chrome molybdenum.mirror polish. 58 Double Ring Spaner set 6-20 MM , 15 off set .material chrome molybdenum,size,450*195*30MM,mirror polish 59 Screw Driver Kit steenless steel Japan 60 Socat Set 6mm-32mm steenless steel 61 62 63 64 65 66 Varnier Caliper 6" ,150 mm,digital, with inner outer and depth jawas Varnier Caliper 150 MM metal analog stainless steel with inner outer and depth jawas Micro Meter Screw Guage meduim size 0mm-25mm analog and digital Leveling meter 300 MM wall cutter large 4- 10 inch 750 watt single phase 220 volt 50 hz Hammer Drill 650 Watt. 13 MM size 13mm single phase 220 volt ac 67 Circular Saw 1500 Watt size 185 mm 1500 watt 220 volt 68 Ceiling Fans 48-56 inch single phase 220 volt ac power 80-120 watt rpm 350 Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 69 Drill Bits 12x15 HSS 2mm-16mm 70 Drill Bits Machin,250 watt ,single phase, 220 volt,50 Hz.over all hight 580 mm,chuck capacity 13 mm,swing,208mmspindal Travel .50 mm.speed range.5 speed,500 - 2500 rpm, 10x15 71 Cutting Disc 3-10inch cost iron 72 Steel Tape 0-12 meter 73 Saftey Spectors 74 Juice Extractor 60 watt 220 volt ac 3450 rpm 75 Washing Machine 255 220 volt 125 watt AC 16 leter water capicity 76 Hair Dryer 500- 750 watt single phase 220 volt 50 hz 77 Cold Chesil 3/4 78 Adjustable Wrench 12" carbon steel 79 Micro wave Oven 20 liter single phase 220 volt 2000 watt 2450 mega hz micro wave frequency 80 81 82 83 Techo Meter 3-1/8 Inch Mechanical Tachometer, Scale Range: 300 RPM to 3500 RPM Mounting: Standard 3-1/8 Inch Instrument Weight: 13 Ounces Accuracy: +/- 25 RPM between 1000 RPM and 3000 RPM Watt Meter -500watt 10 amp single phase / 3 phase 200-500 watt Multi Meter 20 amp 15 second max 200 kilo ohm 1000 volt measuring capicity ac/dc Earth Tester 20/200/2000ohm, 200 volt MEASUREMENT SYSTEM Current injection of 820 Hz, 2 mA EARTH VOLTAGE 0 ~ 199.9 V AC, 50 / 60 Hz MAXIMUM INPUT VOLTAGE 200 V RMS RANGE AND RESOLUTION 0 ~ 19.99 Ω (0.01Ω) 0 ~ 199.9 Ω (0.1Ω) 0 ~ 1999 Ω (1Ω) ACCESSORIES Test cable set, 2 auxiliary earth spikes, user's manual, transport suitcase, 84 Battaries 130Ampere acid 24 plates 12 volt 85 Electric Pannel Board 12x14 2 magnetic contactor 400 volt timer, relay, conectors 15 amp each 86 Circuit Breaker 63 Amp, 2 pole single phase Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 87 Circuit Breaker 63 Amp, 3phase 3 pole, 3 phase 88 Padestal Fan, 24" 125 watt 220 volt 35o rpm 89 Earth Leakage Curcuit Breaker 60Amp M pole 3 pole 0-50 amp single phase and 3 phase 90 Star Delta Starter 10Hp 2 magnetic contactor 400 volt timer, relay, conectors 15 amp each 91 change Over Switch 60 amp single phase / 3 phase,4 pole, 92 Blow Lamp 400w single phase 220 volt 93 Single Phase Energy Meter 20amp 220 volt 94 Digital Earth Meter 20/200/2000ohm, 200 volt 95 Change Over Switch 30 amp single phase / single phase 96 JUICER BLENDER S 750 watt single phase 220 volt 3450 rpm 97 SINGLE POLE BREAKER 10A/ 98 SINGLE POLE BREAKER 16A 99 SINGLE POLE BREAKER 20A 100 6" DIAGONAL CUTTING PLIER 101 PLIER COMBINATION 8" with insulaton handle 102 COMBINATION PLIER 6" with insulaton handle 103 LONG NOZE PLIER 8" with insulaton handle 104 DOUBLE RING SPANER SET 6-22MM 105 STAR SCREW DRIVER kit stainless steel 106 HAMMAER DRILL 710W single phase 220 volt 2mm-4mm drill bit 107 WALL Brecket fan 18" 40 watt single phase 220 volt 50 hz 300 rpm 108 3 pin 28amp circuit brecket 109 washing machine &spin meduim size single phase,220 volt.50 hz,metal body 110 10 kg spiner Dryer medium size single phase 220 vot 350 watt 111 jucier blender single phase 220 volt 75 watt,50 hz. 113 Havy Iron 1000 watt single phase 220 volt,50 hz.stainless steel base plate Long nose Pleir 8" with insulaton handle 114 Long Nose Pleir 6" with insulaton handle 115 Steam Iron 1000 watt single phase 220 volt 50 hz. 116 Side Table Lamp Midume. Single phase 220 volt .50 Hz 117 Side Table Lamp ,220 volt 50 Hz,single phase 118 Pedestal FAN single phase 125 watt 220 volt 350 rpm 119 juicer 80 watt1.5 ltr , 350 watt 3800rpm 120 Hand Grander 350 watt single phase 220 volt 112 Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI 121 8" Diagonal Cutting plier with insulaton handle 122 6" long nose plier with insulaton handle 123 8" Flower cutting Plier with insulaton handle 124 Wire Stripper 2mm 125 7.5 Meter steel tape 126 30 w soldring iron single phase 220 volt 127 12"Hacksaw fram metal meterial 128 steel cutting disc 4"x1 for circular grander 129 60 w glue gun single phase 220 volt 130 angle grander 700w single phase 220 volt 131 Tube road Starter 40w s10 132 automatic air Freshener, single phase 220 volt 133 10" Grip Plier with insulaton handle 134 File flat 10" 135 File Needle 10 Pcs set 136 Electronic bell 6 watt 220 volt single phase 137 Chokepati with 40 watt pure coper/electronic,220 volt.50 hz 138 Blender 750 watt single phase.220 volt.50 hz 139 12"Water Pump Plier with insulaton handle 140 7" Circuler pliers,Carbon Steel ,with insulation handle 141 7"Circuler plier,Carbon Steel,with insulation handle 142 Digital Multimeter DC 2 Volt-600 volt,AC, volt 10 volt -500 volt ,DC,100 ma amp-20 amp 15 second max 10 amp ac /dc 143 Winding Machine with counter 144 DC Multi Power Supply 0-30 volt 10amp,A 10 amp 30 volt supply output power of 300 watts.variable single out put DC power 2 interface 145 Instructor Table as per drawing 146 Instructor chair as per drawing 147 Student Chair as per drawing 148 Steel Almarah as per drawing 149 Working Table 8x4 as per drawing 150 White Board (suitable Size) as per drawing Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected] VOCATIONAL TRAINING INSTITUTE BARKI Government of the Punjab BARKI SR. # 1 2 3 4 5 6 Furniture for office Description Revolving Chair Office Chair Office Table Computer Table Notice Board Steel Almirah Estimated Cost RS.140,000 Vocational Training Institute Meraj Khalid Educational Complex Barki, inside Ikhwan High School Barki Road Lahore. 042 36560100 Website: www.pvtc.gop.pk Email: [email protected]