 Terminal Block – Insulation Displacement To Insulation Displacement Plug

Transcript

Terminal Block – IDC to IDC Plug  Terminal Block – Insulation Displacement to Insulation Displacement Plug This unique modular product can be used to build custom terminal blocks for your traffic detection system. Insulation displacement technology allows for easy wiring and the removable plug allows you to pre-wire outside of the cabinet. Features ˿˿ Mounts to a DIN rail for quick and easy installation ˿˿ Does not require wire stripping ˿˿ Fast conductor connection results in reduced wiring time ˿˿ Resistant to vibration ˿˿ Corrosion-free ˿˿ Removable plug can be wired outside of cabinet ˿˿ Color coded to ensure the plug is always matched with the correct base ˿˿ Most compact design on the market ˿˿ Audible click assures complete termination Insulation Displacement DIN Rail Clip Insulation Displacement WX-500-0134 1  Terminal Block – IDC to IDC Plug Technical Specifications Physical ˿˿ Physical dimensions ̀̀ With plug: 0.2 in. x 2.1 in. x 2.6 in. (0.5 cm x 5.3 cm x 6.6 cm) ̀̀ Without plug: 0.2 in. x 2.1 in. x 1.45 in. (0.5 cm x 5.3 cm x 3.7 cm) ˿˿ Insulating material: PA ˿˿ Insulating material group: I ˿˿ Flammability: UL 94 V0 ˿˿ Pollution degree: 3 ˿˿ Ambient operating temperature: -67°F to 212°F (-55°C to 100°C) ˿˿ Plug connector comes in left, middle and right models for correct assembly ˿˿ Matching end cover protects exposed conductor Mounting ˿˿ DIN rail–mountable Power ˿˿ Nominal current IN: 17.5 A ˿˿ Nominal voltage UN: 500 V ˿˿ Maximum load current: 17.5 A Connections ˿˿ ˿˿ ˿˿ ˿˿ ˿˿ Number of connections: 2 Terminal block base connect: insulation displacement Terminal block plug connect: insulation displacement Removable plug Wire: 24–16 AWG Color Coding ˿˿ Comes in three different models: ̀̀ Gray: standard ̀̀ Green: earth ground ̀̀ Blue: used to color-code plugs to ensure correct placement Ground ˿˿ ˿˿ ˿˿ ˿˿ Green block is grounded via metal foot to DIN rail Rated surge voltage: 6 kV Surge voltage category: III Connection in acc. with standard: IEC 61984 Ordering Information Standard left 175-0054 Standard middle 175-0055 Standard right 175-0056 Grounded left 175-0057 Grounded middle 175-0058 Grounded right 175-0059 Blue left 175-0060 Blue middle 175-0061 Blue right 175-0062 ACCESSORIES 360-0077 – Jumper circuit 175-0053 – End bracket with label Wavetronix 78 East 1700 South Provo, UT 84606 801.734.7200 [email protected] www.wavetronix.com Testing ˿˿ Passed manufacturer’s mechanical, electrical and material tests Warranty ˿˿ One-year warranty against material and workmanship defect (see Click Warranty datasheet for complete details) 2 www.wavetronix.com Terminal Block – IDC to IDC Plug  Terminal Block – IDC to IDC Plug Bid Specification 1.0 General. This item shall govern the purchase and installation of a insulation displacement to insulation displacement plug terminal block (TBIDC) equivalent to the Wavetronix insulation displacement to insulation displacement plug terminal block. 2 .0 Product Description. The TBIDC shall be an electrical connector with an insulation displacement base connector to an insulation displacement plug connector. 3.0 Physical. The TBIDC shall not exceed 0.2 in. x 2.1 in. x 2.6 in. (0.5 cm x 5.3 cm x 6.6 cm) in physical dimensions. The TBIDC shall be made of insulating material PA belonging to insulating material group I. The TBIDC shall belong to class VO according to UL 94 flammability testing. The TBIDC shall have a pollution degree of three. The TBIDC shall operate continuously over a temperature range of -67°F to 212°F (-55°C to 100°C). The TBIDC shall be available in a left model, middle model and right model. The TBIDC shall have a matching end cover to protect the exposed conductor. 4.0 Mounting. The TBIDC shall mount to a DIN rail for quick installation and replacement. 5.0 Power. The TBIDC shall have a nominal voltage of 500 V and a nominal current of 17.5 A. The TBIDC shall have a maximum load current of 17.5 A. 6.0 Connections. The TBIDC shall provide two terminal connections: an insulation displacement connection at the base connection and an insulation displacement connection at the plug connection. The TBIDC shall have a removable insulation displacement plug. The TBIDC shall use wires from 24 AWG to 16 AWG. 7 .0 Color Coding. The TBIDC shall be available in three models: gray as standard, green for earth ground and blue for colorcoding plugs to ensure correct placement. 8.0 Ground. The green (ground) TBIDC shall be grounded via a metal foot to the DIN rail. The green (ground) TBIDC shall have a rated surge voltage of 6 kV and shall belong to surge voltage category III. The green (ground) TBIDC shall have a connection in accordance with the standard of IEC 61984. 9.0 Testing. The TBIDC shall pass the manufacturer’s mechanical, electrical and material tests. 10.0 Warranty. The TBIDC shall be warranted to be free from material and workmanship defects for a period of one year from date of shipment. 3