Preview only show first 10 pages with watermark. For full document please download

Termination System For 19” Technology

   EMBED


Share

Transcript

Termination System for 19” Technology 19” Patch Panel, Swing-Type 19” Patch Panel, 1U, Swing-Type, EV-SP 19H1/24... N0501 • The 19” patch panel serves as a terminal for a fibre optic cable routed to a connector and for storing splices • High mechanical protection through the closed design and the patch area inside • Particularly suitable for 19” cabinets featuring a width of 600 mm • Thanks to the swing-plate (with adapter strip and splice cassette), no patch cord reserves are necessary from a routing duct or storage compartment • The swing-plate is left or right-hinged and is removable for splicing jobs • The forced lateral entry and outlet for patch cords guarantee easy access to the patch panel • Particularly suitable for cables featuring a large number of fibres; only the multi-fibre loose tube is inserted through a cable distribution box and patch panel connection tube • For direct cable insertion a slanted cable entry is available as accessory • Installation point for cable strain relief (central strength member, Kevlar) • Capacity Cable entries 1 x STVR9 Patch panel connection tube or 1 x cable ø 12-16mm straight (PG16 cable gland) or 1 x cable ø 6-16mm slanted (slanted cable entry) Splice cassettes 2 x SK121 Adapters 24 x FC/PC, ST, SC, E2000 • Material Powder-coated sheet steel, RAL 7035 • Scope of delivery 1 Basic enclosure, 1 swing-plate, 1 adapter strip, 2 SK121 splice cassettes, 4 SRH12 splice protection holders, 1 splice cassette cover, 1 numbering strip, 1 copy of Instructions for Installation, fixing material EV_SP_1 Hole Pattern Connector type FC/PC ST SC (=E2000) Accessories for 19” Patch Panel, 1U, Swing-Type Slanted Cable Entry for EV-SP Patch Panels • The slanted cable entry is necessary for direct insertion of a cable into the patch panel • The slanted cable entry provides large bending radii and requires less space • Cable diameters PG7 6-8 mm PG9 6.5-9.5 mm PG11 8-12 mm PG13 10-14 mm PG16 12-16 mm • Material Winkel: Powder-coated sheet steel, RAL 7035 PG cable gland: Nickel-plated brass • Scope of delivery: 1 Angle, 1 PG cable gland, 1 PG counternut 134