Transcript
TerraTec Home Cinema
1
Changes in Version 6
TerraTec Home Cinema Version 6 is a major release. We worked to improve stability, usability and visibility. Thus there are only few new features but many minor improvements to make watching TV more comfortable than ever. Major changes
It is possible to upgrade from ‘Classic’ and ‘Basic’ version to ‘Premium’ version by entering a serial number during setup. Timeshift is always active now1. Improved navigation in timeshift and file playback. An advanced progress bar gives more information on the current time and file position. Improved timer programming Updated PDF manual
Minor changes
2
Changed channel switching with up/down arrows. Now you can preview the current/next information of the channels in your favourite list. Select the channel for viewing by hitting ‘Return’. Duration of manual recordings can be changed through the OSD now. Simply press the record key on the remote control or ‘R’ on the keyboard again to show the end time selection OSD. New OSD dialog to show an overview of timer conflicts.
Important notes
Update from previous versions Version 6 has many changes so it is recommended to uninstall all previous versions below 6 before installing a version 6 or above. The user settings are not affected. They can be kept. To enter a serial number it’s required to run the setup again. New hardware notification TerraTec Home Cinema checks for new hardware and possibly advises you to run the setup again. It’s highly recommended to do so. Otherwise some parts of the new hardware will not work as expected.
3
Known issues
1
Split MPEG recordings are not concatenated automatically during playback
... for digital TV. Old behaviour can be forced via the options on the Audio/Video. For analogue TV permanent timeshift is deactivated by default.
4
History
Version 6.00.16
February, 27th 2009
First version 6.00 released Version 6.00.17
March, 27th 2009
Setup Fixed: Skin is not loaded, if the application is not installed to the default directory Fixed: Uninitialized memory in XML file decryption Scan Corrected TV standard for Bulgaria from SECAM D/K to PAL B/G Timer editing Fixed: Predefined shutdown mode is not set when adding a timer Fixed: Modified timers are not stored Version 6.00.19
March, 30th 2009
Frequencies Updated DVB-C frequencies for Germany (KMS) Devices Fixed: DiSEqC didn’t work for Cinergy S PCI Streams Fixed: Only the first 4 audio tracks are working Version 6.01.00
April, 7th 2009
Scan Corrected TV standard for Bulgaria from PAL B/G to PAL D/K Playback Fixed: Teletext subtitles cannot be selected when playing a MPEG-TS file Remote control Improved responsiveness for some devices Version 6.02.00 Frequencies Added DVB-T frequencies for Greece Subtitles Fixed: Application crashes in teletext subtitle detection
April, 8th 2009
Version 6.03.00
April, 21th 2009
Remote Control Added TerraTec S7 (MKII) Frequencies Added DVB-T frequencies for Iceland Scheduled recordings OSD: Timers are again sorted by date (and not by channel) Fixed: After creating a timer changing the shutdown mode did not take effect. Fixed: After editing a timer the programme title was deleted. Version 6.04.01
May, 7th 2009
Remote Control Replaced some images with better quality Frequencies Corrected character set for Iceland (wrong characters in station names and EPG data) Version 6.04.02
May, 14th 2009
Device Fixed: Cinergy HTC USB XS/TerraTec H5: DVB-C and DVB-T devices were always enabled / disabled together due to identical filenames for receiver settings Diagnostics Added list of tuning spaces to system info in Trace.log Version 6.05.00
May, 26th 2009
Remote Control Fixed: Play/Pause button (SPACE key) did not pause. Improved: Power button now shows the shutdown OSD instead of terminating THC directly. Version 6.11
September, 17th 2009
Setup & Autoupdate Added input page for Elgato serial number (enables 12 month free tvtv subscription) Allow autoupdate from HTTP servers New VCRedist 5.0.50727.4053 DirectShow & DVB Fixed reset of PSI filter for PID filter devices (sometimes not all stations were found) Fixed PiP with PID filter devices not working Fixed BBC-HD not recognized as TV channel Station Setup / Channel Editor Allow download of channel lists from HTTP servers Updated Astra/Anixe HD frequency
Record Hide index files in record folder Miscellaneous Cache DirectX version to speed up THC start Fixed tvtv and audio/video page not updated when changing user interface language Devices Enabled RDS for EyeTV Hybrid Added support for EyeTV DTT Deluxe and other EyeTV products Remote Control Added support for EyeTV DTT Deluxe and other EyeTV products Version 6.11.06
October, 26th 2009
Setup Removed remote control option “Cinergy S USB” from custom setup. The selection is always done automatically. Added workaround to enumerate the encoders as admin during the setup. This will hopefully fix the issue that THC hangs when starting as normal user. Frequencies Added frequency list “United Kingdom (London)” Force fine scan for Australia, France and U.K. where transponders are transmitted with a frequency offset. Cut!
Cut! output directory is now stored.
Version 6.12
December, 4th 2009
Autoupdate Gentle redesign of the update notification dialog Frequencies Updated frequency lists for Italy Added frequency lists for Dutch cable TV providers (Ziggo) Decoders Windows 7: Support for H.264 decoding with "Microsoft DTV-DVD Video Decoder" Windows 7: Support for AAC decoding with "Microsoft DTV-DVD Audio Decoder" Remote Control
New Remote Control Editor version 5.22
Improved responsiveness by increasing the poll thread priority Added support for EyeTV Sat via Cinergy T² interface Fixed: Remote Control Editor crashed with some devices. Error message: "0xC0150010: The activation context being deactivated is not active for
the current thread of execution." This problem occurred mainly in Windows 7 with these devices: Cinergy Hybrid XE, TerraTec S7, TerraTec H7, EyeTV Sat Fixed: Application could not be started on some systems Removed dependency on msvcr80.dll Fixed: Volume control was not working in Windows Vista / Windows 7 Fixed: Set device name for Cinergy T² on "Options" page
Version 6.13.16
Jan, 4th 2010
THC
Fixed waking up from (user initiated) suspend
Devices
Support for Cinergy HTC USB XS (MKII) & TerraTec H5 (MKII) Eye TV DTT Deluxe (2009) – Fixed station scan found not all stations EyeTV Hybrid (U.S.) showed 2 DVB-C devices
Fixed: PThreadVC2.dll was not installed for Channel Editor
Setup
Autoupdate Fixed crash in VersionCheck.exe when no Internet connection is available. Frequencies Updated frequencies for ASTRA 19.2° Remote Control New version v.5.23 – fixes for Eye TV DTT Deluxe (2009) Version 6.13.18
Jan, 19th 2010
Remote Control New version v.5.25 – fixes for Eye TV DTT Deluxe (2009); allows eLNA override Version 6.14
Feb, 3rd 2010
Decoder Elgato version only: Added Elgato Audio (default for France) Devices Elgato version only: Support for EyeTV Netstream DTT Cinergy Hybrid XE: Enable FM radio Version 6.14.01
Mar, 18th 2010
Decoder Allow decoder selection for each audio subype separately (MPEG Audio, AC-3/EAC3, AAC) Frequencies Updated DVB-T frequency table for Portugal
Version 6.14.02
Mar, 20th 2010
Recordings Fixed Windows 7: Scheduled recordings failed if scheduled time lay 3 hours or more in the future. Windows Vista/7: Allow scheduled recordings even if system runs on batteries Version 6.15.05
Apr, 30th 2010
Setup
Redistributable setup for Visual Studio 2008
Devices Support for Cinergy T Stick Black Recording
Fixed: (Windows Vista/7) Scheduled recordings were not recorded under Windows 7 when the scheduled time was more than 3 hours in the future (Windows Vista/7) Allow waking up system if it runs on batteries
Version 6.15.06
Apr, 30th 2010
Devices Support for Cinergy S2 USB HD Recording Fixed crash on Windows XP when THC was started for scheduled recordings Remote Control New version v.5.27 – internal changes Version 6.15.07
May, 11th 2010
Remote Control
New version v.5.28 – Support for Cinergy S2 USB HD
Version 6.15.08
May, 21st 2010
Devices Support for Cinergy T Stick Mini Version 6.15.11
June, 9th 2010
Remote Control (v.5.31)
Support for Cinergy T Stick Mini Fixed: Application did not run on a clean Windows XP / Vista
Version 6.15.12 Devices Support for Cinergy S2 USB HD (MKII)
July, 15th 2010
Teletext (Decoder v.4.73)
Fixed missing teletext pages on ARTE
Remote Control (v.5.32) Support for Cinergy S2 USB HD (MKII) Fixed: Application did not run on a clean Windows XP / Vista July, 15th 2010
Version 6.15.13 Devices Support for TerraTec T1 Fixed: EyeTV Netstream DTT detection was broken Scan
DVB-S: Allow to specify the DiSEqC position when importing stations from Internet or local files. Show polarisation and DiSEqC position on scan page Updated transponder settings for Satellites Astra 19.2°E, Hotbird 13.0°E, Eurobird/Astra 28.5/2°E
Version 6.16
September, 13th 2010
Autoupdate Improved layout of update notification message Support hyperlinks in update messages Teletext (Decoder v.4.74) Fixed crash when ARTE teletext was viewed Fixed wrong display of graphical pages due to incorrect usage of “spacing attributes” (tested against ARTE pages 196, 197, 198) tvtv
Updated URLs to tvtv web pages
Decoders Added Elgato video decoder Elgato audio decoder: Fixed playback of mono audio Elgato decoders are now the default selection (if installed) Remote Control (v.5.34) Support for TerraTec T1 Version 6.17.13 Devices Support for EyeTV Netstream Sat Support for new revisions of TerraTec devices Misc
Added UI for specifying the country of your location
November, 12th 2010
Channel database
Massive speed improvement when handling large stations lists Support for Logical Channel Numbers (DVB-T, DVB-C) Location aware auto-sorting of channel lists after scan Store videotype / audiotype / HDTV for each channel Support for .ech file format
Version 6.17.20
November, 17th 2010
Devices Support for TERRATEC T5 (MKII) Bugfixes for EyeTV Netstream Sat / EyeTV Netstream DTT Misc
Added Danish localization
Version 6.18.00
December, 1st 2010
Scan
Added satellite detection Added automatic download of DVB-S station lists
Improved channel switch times
Tune
Devices Bugfixes for EyeTV Netstream Sat / EyeTV Netstream DTT Version 6.18.01
December, 6th 2010
Scan
Updated frequencies for DVB-T (Germany:Niedersachsen / Mitteldeutschland) Updated frequencies for DVB-S (various satellites) Fixed: Occasionally an invalid language string was stored
Page Channels Allow sorting by satellite position Version 6.18.02
December, 8th 2010
Tune
Improved channel switch times when timeshift is active by 1 - 1.5 seconds
Version 6.18.03 Tune
Avoid multiple video window resizing after channel switch
December, 9th 2010
Version 6.19.00
January, 20th 2011
User Interface Show Aero windows frame for TV window (Windows 7 only) Page Channels Allow sorting of DVB-S station by satellite Subtitle decoder Fixed memory leak; occured after changing devices or switching PiP on Maintenance Bugfixes Version 6.21.00
March, 28th 2011
User Interface
Updated untranslated strings for several languages
Updated DVB-T frequencies for U.K. Updated DVB-T frequencies for Belgium Improved signal detection and transponder scan. Scan should be more reliable and faster in many situations. Tuning to a frequency with no signal should not block the application as long as before.
Scan
Network Devices Fixed: Device detection and/or streaming did not always work when a system had multiple network adapters (e.g. LAN and WiFi) Run UPnP (SSDP) discovery on all network adapters interfaces Improved status messages from network messages. Version 6.21.07
April, 13th 2011
Devices Support for TERRATEC N3 Support for Valups Tivizen Cinergy T Stick Video: Fixed: No sound for analogue TV Remote Control (v.5.47) Support MCE always (even in “exclusive” mode”) Improved handling of double function keys bugfixes Version 6.22.00 Devices Support for TERRATEC T6 Remote Control (v.5.48) Support for TERRATEC T6
April, 13th 2011
Version 6.23.02
June, 3rd 2011
Devices Support for TERRATEC G1 Better signal strength output for various products Scan
Show signal quality for the current frequency during channel scan Some improvements on the DVB-SI parser
Fixed: Long serial numbers could not be entered during the setup
Setup
Version 6.23.17
July, 15th 2011
Devices Valups Tivizen New firmware 2.1.310 USB Mode Home Network Mode Added Bonjour device discovery. Fixed: A wrong device state was set on THC start when using multiple Netstream devices. Fixed: THC could not store channel list Fixed a crash on THC startup on Windows 7 with KB2507938 and KB2533623 Scan
Updated DVB-S frequencies for several satellites. Updated DVB-T frequencies for Berlin
Version 6.24.08
October, 11th 2011
Devices Valups Tivizen New firmware 2.1.333 (includes some improvements for USB Mode and solves a problem with special characters in WPA passwords) Scan
Solved a problem where DVB-C channel scan could not be started Add DVB-S frequencies for Nilsat 101/102/201 Atlantic Bird 7 Improve Scan.log
Maintenance Minor Bugfixes Version 6.25.08
November, 24th 2011
Devices Added support for TERRATEC H5 (MKIII) and TERRATEC T5 (MKII) Dynamic device management: Handle connection and disconnection of USB devices Tuning
DVB-S: Support for Unicable (EN50494) with
o o o
Elgato EyeTV Netstream Sat Elgato EyeTV Sat Elgato EyeTV Sat Free
Maintenance Avoid crashes when disconnecting devices while THC runs Remote Control Editor
New version v. 5.51.0.425 Fixed: Cinergy HT PCI (MKII) was not supported anymore Fixed: (bug was introduced Oct-10) Fixed: EyeTV Sat/Sat Free not available after resume
Version 6.27.10
July, 11th 2012
Common Fixed monitor aspect ratio was not properly detected for some Netbooks (e.g. resolutions of 1024x600, 1366x768) Fixed a crash which happened when closing THC and leads to missing recording jobs. Fixed switching analogue TV channels takes very long when tuning to any other receiver before Improved channel switching times Fixed audio is not muted when THC starts in silent mode User interface Fixed various buttons on the control panel are disabled in specific situations Scan
Added an option to the advanced settings tab to enable/disable storing logical channel numbers (LCN) during channel scan
Fixed EPG details view sometimes shows information of previous shows instead of the current
OSD
Version 6.28.00
October, 10th 2012
Devices Added support for EyeTV Micro Version 6.28.02 Devices Corrected signal strength display for EyeTV Micro Maintenance Setup changes for Windows 8: Only install a single tile
October, 30th 2012
Channel database
Fixed bug that not all channels in THC exported from THC to a Netstream device appeared in iOS or Android apps. This happened if the video type was not found for a channel during scan.
Preview Fix channel was unmuted after changing channels Version 6.28.08 Devices New EyeTV Netstream Service installer v.1.01.00.16 Fix a EyeTV Sat Free Unicable problem Scan
Updated DVB-T frequencies for Italy Updated DVB-S frequencies for Astra 19.2°
April, 16th 2012
