Transcript
TERRESTRIAL ANTENNAS ZenitHD aerial passive or active on 21/60 channel New DESIGN + New CONSTRUCT P/N 256003 / 256006 / 256009 / 256013 / 256016 / 256019
The ZenitHD aerial are optimized for terrestrial digital video broadcast signal over the new channels 21-60 bandwith. They help protecting against LTE signals. Focus is on built quality, with a fully streamlined undeformable dipole. The director elements are doubled resulting in a better phase management, improving the gain and the impedance. Reflectors have a parabolic shape, using aluminium stamping technology, providing an efficient radio protection, increasing front-to-back ratio. They are foldable allowing fast mount and unmount without tools. The product range include also low-noise, low-consumption pre-amplified antennas to linearize the gain over the bandwith. The integrated amplifier auto switch to pass-through when unpowered.
PICTURES
PERFORMANCES
Doubled elements for phase management
Registred pattern Patent pending
3 elements
6 elements
Aluminium reflector cutted and stamped
Snapping Stripline printed dipole
Boom assembling with snap
9 elements
TONNA Electronique 36, avenue Hoche - BP 1026 - 51686 REIMS Cedex 2 - France Tél : +33 326 05 50 50 - Fax : +33 326 05 50 95 www.tonna.com
Pre-assembled for an easy set-up no tools required
SPECIFICATIONS PART NUMBER Nb of directors elements Type ELECTRICAL SPECIFICATIONS Channels Bandwith Gain Front to back ratio Beamwidth MECHANICAL SPECIFICATIONS Length Weight Mast clamp Effective wind load (130 km/h) H Effective wind load (130 km/h) V
256003 3 Passive
256006 6 Passive
256009 9 Passive
256013 3 Active
256016 6 Active
256019 9 Active
21 / 60 470 / 790 11,1 - 13,2 32 à 37 2 x 21
21 / 60 470 / 790 11,2 - 13,9 32 à 37 2 x 18
21 / 60 470 / 790 11,3 - 14,8 32 à 37 2 x 16
21 / 60 470 / 790 30,5 - 31 32 à 37 2 x 21
21 / 60 470 / 790 31,5 - 32 32 à 37 2 x 18
21 / 60 470 / 790 32,5 - 33 32 à 37 2 x 16
MHz dBi dB °
0,52 1,5 35 / 60 2,4 11,1
0,85 1,8 35 / 60 3,6 15,6
1,25 2 35 / 60 5,4 22,4
0,52 1,5 35 / 60 2,4 11,1
0,85 1,8 35 / 60 3,6 15,6
1,25 2 35 / 60 5,4 22,4
m kg mm daN daN
GAIN RESPONSE Gain response active antenna
Gain response passive antenna 34
16 Gain Antennes ZenitHD versions sèches
15
35
Horizontal Opening Diagram
35
ZenitHD 9 sèche
Gain Antennes ZenitHD versions amplifiées
33
ZenitHD 9 amplifiée ZenitHD 6 amplifiée
ZenitHD 6 sèche ZenitHD 3 sèche
30
14
10
Gain dBi 20
13 12
5
11
0
-5
10
-10 475 MHz
500 MHz
9
ZenitHD 3 amplifiée
32
25
GAIN DBi
GAIN DBi
15
Gain dBi
25
20
30
31
15
10
ZénitHD 3
5
ZénitHD 6
0
ZénitHD 9
-5
30 ZénitHD 3 Amp 29
ZénitHD 6 Amp ZénitHD 9 Amp
28
-10
525 MHz
550 MHz
470 MHz
575 MHz
500 MHz
600 MHz
625 MHz
550 MHz
650 MHz
675 MHz
600 MHz
700 MHz
725 MHz
650 MHz
750 MHz
775 MHz
700 MHz
787,5 MHz
800 MHz
750 MHz
825 MHz
860 MHz
800 MHz
475 MHz
27
500 MHz
525 MHz
470 MHz
550 MHz
575 MHz
500 MHz
600 MHz
550 MHz
625 MHz
650 MHz
600 MHz
675 MHz
700 MHz
650 MHz
725 MHz
700 MHz
750 MHz
775 MHz
787,5 MHz
750 MHz
800 MHz
825 MHz
860 MHz
800 MHz
PHASE SHIFT MANAGEMENT ZenitHD output signal Corrected phase difference, improved gain
Standard aerial output signal Uncorrected phase difference
Improved BER and MER, SWR < 1.5
STRIPLINE TECHNOLOGY
AUTO-SWITCHABLE AMPLIFIER FILTER
AMPLI 20 dB
INPUT
OUTPUT
PILOT SWITCH
REGULATED POWER SUPPLY
Amplifier synoptic
Noise factor < 1 dB
99 % RECYCABLE PRODUCT All used materials are recycable : aluminium, steel, plastics and cardboard. Compliant with CE, RoHS and DEEE.
NON INCLUDED ACCESSORIES Passive version : non filtered active dipole, P/N 401560 - Gain 29dB. Active version : either a power inserter 1 output (wich takes place behind the TV set P/N 301087) or a standard power-supply 2 outputs with wall mounting P/N 301055. TONNA Electronique 36, avenue Hoche - BP 1026 - 51686 REIMS Cedex 2 - France Tél : +33 326 05 50 50 - Fax : +33 326 05 50 95 www.tonna.com
Non-binding document. Doc. n° 143060 – Ver. 2014/10/29
STRIPLINE allows the radiation diagram to operate on the whole dipole circuit.
