Transcript
ACCESSORIES
TEST-010
CCTV IP Tester Device G E N E R A L F E AT U R E S
• Micro SD card changeable • 3.5”TFT-LCD, 480(RGB)x320, global-view display screen • LCD screen Brightness/Contrast/Color Saturation adjustable • Automatically adapts and displays the video format of NTSC/PAL • 10xzoom,Video screen can be magnified to look the details, easy to use • Snapshot and can capture and save the image in the SD card • Video record and playback • Link monitor, check the setting IP address whether available • PTZ address scan, search up the ID of PTZ camera • Digital Multimeter • Video level meter • Cable scan (Wire tracker) S P E C I F I C AT I O N S
test-010 Model
TEST-010
Video Test
Photograph, Video record, Record playback Photograph
Snapshot and save the current image as JPG file
Video record
Video record and storage the file To view the storage file in the SD card
Signal mode
NTSC/PAL (Auto adapt)
Display
3.5 inch digital TFT-LCD ,480 (RGB) x 320 resolution
LCD adjustment
Brightness, Contrast, Saturation adjustable
Video IN/OUT
1 channel BNC Input & 1 channel Output
Record playback
Video Output Mode
1.0 Vp-p
IP scan, Link monitor, PING test
Video Level test Level test
Video signals measured in IRE or mV
PTZ controller Communication
Support RS232 and RS485
PTZ Protocol
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate
600,1200,2400,4800,9600,19200,57600,115200bps
Video Signal Generation Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
Color bar generator UTP CABLE TEST
Test UTP cable connection status and display in the screen. Read the number of the test box.
UTP cable test DC12V 1A power output DC12V power output
Output DC12V1A power for camera
Audio input test Audio input test
Test the pickup and other audio equipments on the front-end
RS485 data analysis Data Monitor
Captures and analyzes the command data from controlling device
Image 10x zoom
IP scan
Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor
Check the IP address whether is occupied
PING testing
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
POE tester POE tester
Display the power supply voltage and cable connection states
Power Power Adapter
DC 5V (1.5A)
Battery
Built-in 3.7V Lithium polymer battery ,3000mAh
Working Temperature
-10degrees - + 50degrees
Dimension/ Weight
194mm x 112mm x 48mm / 540g
10x zoom image display and video out
Image 10x zoom
®
For further information on our products visit our website www.adata.co.uk or email:
[email protected]
TEST-010
CCTV IP Tester Device
NEW CCTV IP TESTER RANGE Specification
TEST-009
TEST-010
TEST-011
TEST-012
3.5 HVGA LCD
P
P
P
P
Image 10x zoom
P
P
P
P
Video Snapshot
P
P
P
P
P
P
P
Video record Record playback
P
P
P
P
SD card moveable
P
P
P
P
Image generator
P
P
P
P
Video signal level test
P
P
P
P
Data monitor
P
P
P
P
PTZ address scan
P
P
P
P
UTP cable testing
P
P
P
P
DC 12V/1A output
P
P
P
P
Audio testing
P
P
P
P
Led torch
P
P
P
P
PING testing
P
P
P
P
Ethernet port flicker
P
P
P
P
PoE voltage measurement
P
P
P
P
Link monitor
P
P
P
P
IP address scan
P
P
P
P
Cable scan (wire tracker)
O
P
P
P
Digital Multimeter
O
P
P
P
Visual fault locator
O
O
O
P
Video level meter
O
P
P
P
TDR cable tester
O
O
P
P
®
For further information on our products visit our website www.adata.co.uk or email:
[email protected]
ACCESSORIES
TEST-010
CCTV IP Tester Device
NEW CCTV IP TESTER RANGE ADVANCED KEY FEATURES
TDR TESTER
VIDEO FAULT LOCATOR: Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fibre’s bending and breakage, Continuous light-emitting and 1HZ, 2Hz modulating light output. FEATURE AVAILABLE ON TEST-012
TDR CABLE TESTER Is used to test equipment to locate faults inaccessible cables. Ideal for BNC cable, network cable and control cables it will identify any ‘break-point’ and ‘short-circuits’ in the cable.
VIDEO FAULT LOCATOR
FEATURE AVAILABLE ON TEST-011, TEST-012
SD
CABLE SCAN
CARD SLOT
LED
MICRO SD SLOT Store images on SD card.
TORCH
DIGITAL CABLE SCAN: Tests the cables to make sure it gets a signal on all the pin terminals, checks for line breaks or damage on the cable. Four Audio types can be chosen.
Press to turn on the Led Torch to work in the dark or at night.
MULTIMETER
VIDEO
LEVEL METER
FEATURE AVAILABLE ON TEST-010, TEST-011, TEST-012
®
DIGITAL MULTIMETER: A digital multimeter is a tool that can measure AC/DC voltage, current, Resistance, Continuity, Capacitance and Diode test, Data Range, Data Hold, Relative measuring. It has a (LED) display, rather than analog meter, which has a needle and a gauge.
VIDEO LEVEL METER: Test the Peak video signal, SYNC signal level, Colour BURST chroma level more accurate. While the tester receive the video signal, it will automatically measure the PEAK video signal level, the SYNC signal level and COLOUR BURST level(chroma level).
FEATURE AVAILABLE ON TEST-010, TEST-011, TEST-012
FEATURE AVAILABLE ON TEST-010, TEST-011, TEST-012
For further information on our products visit our website www.adata.co.uk or email:
[email protected]
ACCESSORIES
TEST-010
CCTV IP Tester Device
NEW CCTV IP TESTER RANGE FEATURES AVAILABLE ON ALL MODELS
VIDEO SNAPSHOT Capture the video image and save the current video frames as JPEG file
POE TESTER Will tests the PoE voltage when the POE switch is supplying the POE power to IP camera. Clearly displays the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.
DATA MONITOR Check the RS485 communication states of the video optical transmitter is correct. Analyse the protocol and check the data through the displayed codes.
UTP CABLE TESTER Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.
10X ZOOM IMAGE Set image 10x zoom, can view and display the local details by 1x, 2x, 3x, 4x, 5x, 6x -10X zoom in the monitor and tester. PTZ CONTROLLER Support up to 30 kinds of protocols. Setup the controlling parameters, baud rate, communication port, PTZ ID, protocols, pan/tilt speed. ADVANCED IP TESTS The tester will send signals to make the connected PoE port flicker at special frequency, which will enable the installers to easily and quickly find the connected ethernet cable. This function can prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network connection.
®
PING TESTING Is used for testing if the connected IP camera or other network equipment’s Ethernet port is working normally and the IP address is correct.
VIDEO RECORD Record and save the current video on to the SD card.
For further information on our products visit our website www.adata.co.uk or email:
[email protected]
ACCESSORIES
TEST-010
CCTV IP Tester Device
®
For further information on our products visit our website www.adata.co.uk or email:
[email protected]
ACCESSORIES
TEST-010
CCTV IP Tester Device
®
For further information on our products visit our website www.adata.co.uk or email:
[email protected]
