Transcript
Cable Testers
2015 Master Catalog 1.0
Patch Cord
Wall Plate
Patch Panel Horizontal Runs
Master unit sends signal through premise wiring. LEDs light as it steps through each conductor. Item #
Unshielded or Shielded Twisted Pair
Remote Unit LEDs light up as it receives signal through each conductor.
Test Shielded RJ45
Patch Cord
Description
List Price
TL-N044-000-R
Tripp Lite Multi-Function Network / Phone / Coax Cable Tester
Tripp Lite's Multi-Function Network Cable Tester allows you to test wiring continuity for Cat5 / 5e, Cat6, RJ11/12 telephone cord sets as well as 10Base2, RF and CATV coax cable assemblies. It can help Identify miswired terminations, shorts and open circuits. It features a two piece design, a main unit and a remote unit. The remote unit is designed to slide onto the side of the main unit but can be removed when testing premise cabling where the two ends of the cable being tested are not close by. The Main unit features (1) Shielded RJ45 (8x8) Jack, (1) Shielded RJ11/12 (6x6) Jack and (1) Female BNC. The Remote unit features (1) Shielded RJ45 (8x8) Jack on one side of the unit and (1) Shielded RJ11/12 (6x6) Jack on the other. The tester also comes with (1) BNC Terminator with a Green LED on the end to Test BNC Coax assemblies. The kit also includes (2) BNC Male to F-Type Female adapters to allow for the testing of RG59 / RG6 CATV Coax. A Storage pouch is provided for safe storage of the tester and accessories when not in use. Power supplied by 9V battery (not included). Comes with a Tripp Lite Lifetime Warranty. As an authorized Tripp Lite reseller we can bid on RFQs for any Tripp Lite part numbers. Contact us to request a non-obligatory quote. TL-N044-000-R
TEST EQUIPMENT
Using the TL-N044-000-R for checking premise wiring
Tripp Lite Multi-Function Network/Phone/Coax Cable Tester
Carrying Case for TL-N044-000-R
47.98
Pyle 13 Plug Pro Audio Cable Tester
The Pyle PCT40 gives you a simple and easy way to make sure your audio cables are working properly. The unit supports nearly all cable types used in the sound recording industry, providing you with an all-in-one solution to help identify cable continuity issues in your audio set-up. Supports 13 interface types that include USB Type A, TRS Jacks (which can also be used for testing TS), 3 and 5 Pin XLR, Speakon, RCA, RJ45 and more (see chart below for full listing). The Tester features a simple intuitive design, whereby you plug in both ends of the cable you are testing and you turn the selector knob to the different numbered setting to check each conductor individually (tester checks up to 8 conductors). Each numbered setting features two LEDs, one checks the continuity of the conductor the other verifies the ground. Power supplied by 9V battery (not included).
PCT40
SK-AFT-G-FC
Supports the following connector interfaces: • 8 Pin Speakon (speaker twist connector)
• 3 Pin Din
• USB Type A
• 5 Pin Din
• RJ45
• 7 Pin Din
• Banana Plug
• 8 Pin Din
• 1/4" (6.3mm) TRS
• 5 Pin XLR
• RCA Phono
• 3 Pin XLR
Fault Locator ON
Fault Locator OFF
• 4 Pin Speakon (speaker twist connector) PCT40
Pyle 13 Plug Pro Audio Cable Tester
42.98
Senko Fiber Visual Fault Locator
The Senko AFT-G-FC Fiber Visual Fault locator features a robust and handy design. It emits a 650nm visible red light in either continuous or pulse mode to allow for the quick inspection of fiber assemblies to confirm light path. Can also be used to visually trace fiber optic cable runs within a building. SK-AFT-G-FC SK-AFT-G-CAC
Senko Fiber Visual Fault Locator with Universal 2.5mm Connection Senko Universal 2.5mm to 1.25mm Adapter for Fiber Visual Fault Locator
SK-AFT-G-CAC
119.98 34.98
CoolMax ATX Power Supply Tester with LCD Display
The CoolMax ATX Power Supply Tester provides a simple and easy way to verify that your computer power supply is providing the correct power output. The Tester features a 1.7 inch x 0.8 inch illuminated LCD display that provides voltage information from the power supply's 20 or 24 pin power connector. The LCD display & readings are turned on by holding down the momentary on / off switch found on the face of the tester. The display provides 7 power readouts (+5V, +12V1, +3.3V, -12V, +12V2, 5VSB & PG). It also features an audible alarm alerting you to low voltage, over voltage or no voltage on one of these readings. The Tester also features 3 voltage LEDs for the other connector interfaces (15 pin SATA) (4 pin Molex) (4 pin Floppy) (6/8 pin PCIe) and (4/8 pin CPU) the voltage LEDs light up when the correct voltage is present. The tester's small compact design makes it an ideal tool to keep with your PC repair / maintenance kit, (no batteries required, power provided by power supply being tested). CM-PS-228
CoolMax ATX Power Supply Tester with LCD Display
CM-PS-228
24.98
PLANET IEEE 802.3af/at Power over Ethernet (PoE) Tester
PLANET's POE-TESTER is an easy to use PoE diagnostic adapter for network installers, company MIS and even home users to quickly identify the existence of Power over Ethernet on their network. It is designed to detect if IEEE 802.3af/at PoE voltage is running over your UTP cable, and you can use a short patch cord to test PoE ports on devices directly. The POE-TESTER has two simple LEDs one orange & one green that light up to identify 3 different possible PoE states, Mid-span 802.3af/at, End-span 802.3af/at as well as detecting a 4-pair 60-Watt PoE Injector. As an authorized PLANET reseller we can bid on RFQs for any PLANET part numbers. Contact us to request a non-obligatory quote. POE-TESTER
PLANET IEEE 802.3af/at Power over Ethernet Tester
20.63
POE-TESTER
Microsemi PowerDsine Deluxe IEEE 802.3af/at Power over Ethernet (PoE) Tester
Microsemi's PD-AFAT-TESTER is a compact designed tester specifically tailored for system integrators and installers. The plug and play design makes it simple to use. The PD-AFAT-TESTER has two bi-color LEDs allowing it to display up to 6 possible PoE states which identifies the type of Power Sourcing Equipment Endspan (Data) or Midspan (Spare) on your network with the 2-pair states indicating 30W and the 4-pairs 60W. • 802.3af (Over Spare) • 802.3af (Over Data) PD-AFAT-TESTER
• 802.3at (Over Spare) • 802.3at (Over Data)
• 802.3af (4 Pairs) • 802.3at (4 Pairs)
Microsemi PowerDsine Deluxe IEEE 802.3af/at PoE Tester
Online: L-com.com | Toll Free: 800-343-1455 | E-mail:
[email protected] | Fax: 978-689-9484
29.98
265
PD-AFAT-TESTER
