Preview only show first 10 pages with watermark. For full document please download

Th2 Tyre Heater - Instruction Manuel

   EMBED

Share

Transcript

Xceed TH-2 Tyre Heater is a professional Tyre Heater for RC cars. Fully Programmable, Easy-to-operate and made of strong anodized light weighed aluminum green/black color case. The Easy-to-use menu is accessed through the padded buttons on the front and clear LCD screen panel. The covered aluminum tyre cups can connect easily to the main case with a socket on each side. The Xceed TH-2 includes 2 pieces of self adhesive foam padding which apply to the top of the case to avoid scratches. A high quality cables/connector set is included to connect the power supply to the Xceed TH-2. 1. CONTENTS 1 P.1 Introduction and Specification P.2 Operation Panel (Main Menu) P.3 Quick Warming Setting P.4-5 Step Warming Setting P.6 Timer Warming Setting P.7 Lap Timer P.8 USB and User Setup P.9 Important Notes P.10 Warranty Registration The Xceed TH-2 can also be used with battery power only. The (optional) battery can be mounted and connected from the bottom of the case. The USB connector provided can be used to charge mobile equipment like smartphones and camera. Specification: • Input voltage: DC 7.2V ~ 15.0V • Quick warming (20~100˚C) • 3 step warming • Lap timer / Timer • Programmable timer / PC interface • Celsius-Fahrenheit selectable display • 8 different beep tones / 10 melody • Front & Rear temperature can be set independently • Temperature of 4 tires is controlled by IC • Includes 4 alu cups / cables for TC tyres • Wireless action by battery pack (option) • USB-connector to smart phones 2. Operation Panel (Main Menu) A.) < UP > Button and < DOWN> Button: Data Setting Button * Modes Display / Data setting UP SETUP (DEC-) B.) < LEFT> Button: Set up Button * Program Setting ►Quick Warming Set up ►Step Warming Set up ►Time Warming Set up ►Racing Time Set up ENTER (INC+) STOP DOWN * Decrease (-) the setting on screen XCEED RC TYRE HEATER V2.1 SETUP Quick Warming Setup SETUP Step Warming Setup SETUP Timer Warming Setup SETUP Race Time Setup 1.QUCIK WARM 2.STEP WARM 2.STEP WARM 3.TIMER WARM 3.TIMER WARM 4.LAP TIMER 4.LAP TIMER 1.QUCIK WARM ENTER Quick Warming ENTER Step Warming ENTER Timer Warming C.) Button: Enter / Stop Button * To start/stop function ►Quick Warm: Start quick warming function by 1 finger tap ►Step Warm: Front and Rear tyres are warmed separately by different time ►Timer Warm: Set warming time, warming function will be completed (for both front and rear tyres) under a designated time ►Lap Timer: * Increase (+) the setting in set up mode ENTER Lap Time NOTES: The following operation note will be shown on display screen automatically when this device is activated each time 2 3. Quick Warming Set up Data setting mode Quick Warm Set F:60˚C R:60˚C ENTER SETUP 1.QUCIK WARM 2.STEP WARM SETUP Quick Warm Set F:60˚C R:60˚C ENTER ENTER STOP Operating mode F:59˚C F:59˚C SETUP R:60˚C R:59˚C SETUP Warming Time [ 23 : 54 ] STOP UP ENTER SETUP Quick Warming Setup A.) Press setup button, if needed move to Data Setting mode for Quick Warm Function. User also can check warming time by pressing “Set up” button when Xceed Tyre warmer is in operation. D.) If temperature sensor is not connected properly to tyre warmer in operating mode, then “------------“ mark will be appeared and marked. For solution, temperature sensor is needed to connect again. Current temperature will be shown and indicated. B.) Setting Parameters: Front = Front Left, Front Right Temperature: 20~100˚C Rear = Rear Left, Rear Right Temperature: 20~100˚C E.) Data Setting during Quick Warmimg: * Move to Data Setting Mode by press UP Button * Set data with this same method with Data Setting Mode * When data setting is completed, then press ENTER , SETUP Button. Function will be back to operating mode and working properly and normal with the data which set by user. C.) When tyre warmer cups are working properly in operation mode, temperatures will goes up automatically and temperatures light is also blinking too. Data setting during warming status is possible in Quick Warm Mode only 3 4. Step Warming Set up Data setting mode 20 min F:60˚C R:60˚C ENTER S1 ENTER SETUP SETUP SETUP S2 ENTER S2 Delay Set [ 1 min ] Operating mode Start Delay Set [ 1 min ] ENTER Auto Start Timer [ 00 : 57 ] ENTER SETUP STOP SETUP STOP SETUP SETUP S3 Delay Set [ 1 min ] F:59˚C F:59˚C S1 STOP SETUP SETUP 20 min F:60˚C R:60˚C STOP SETUP 20 min F:60˚C R:60˚C ENTER 2.STEP WARM 3.TIMER WARM ENTER STOP SETUP STOP SETUP STOP SETUP S2 Delay Timer [ 00 : 57 ] F:59˚C F:59˚C ENTER S2 R:60˚C R:59˚C R:60˚C R:59˚C S3 Delay Timer [ 00 : 57 ] F:59˚C F:59˚C R:60˚C R:59˚C * Step Warmin * * Completed * 4 While working it shows the working time of each phase S1 Warming Time [ 23 : 54 ] SETUP SETUP ENTER S2 Warming Time [ 23 : 54 ] SETUP SETUP ENTER S3 Warming Time [ 23 : 54 ] SETUP SETUP ENTER A.) Data Setting Mode ►Press SETUP Button while in main mode ►Select setting data by press ENTER , SETUP Button, when selected, it will blink. ►Press UP Button and DOWN for data setting ►Data Setting Range - Operating time : 0 – 59 min - Front, Rear Temperature: 20~100˚C - Delayed time setting : 0 – 59 min B.) Operating Mode ►During operation, press STOP Button. Device will stop the current function and move to main mode ►Auto Start Timer function at the start: When setting time comes, auto warming operation is activated too. During operation, press ENTER Button. Auto Start Timer - Auto timer setting range: : 0 – 60 min [ 00 : 57 ] 5 5. Timer Warming Set up Data setting mode Now Set ENTER [ 10:23:15 ] [ 11:30:00 ] SETUP Warming Time Set [ 1 min ] ENTER SETUP SETUP SETUP ENTER > 3.TIMER WARM 4.LAP TIMER * Timer Warming * * Completed * ENTER STOP ENTER STOP Operating mode Now [ 10:23:15 ] Start[ 11:30:00 ] F:59˚C F:59˚C R:60˚C R:59˚C Timer Warm Set F:60˚C R:60˚C A.) Data Setting Mode ►Press SETUP Button in main mode ►Select setting data by press ENTER , SETUP Button. It will blink as chosen. ►Set hour, minute and second by press ENTER , SETUP Button. ►Data Setting Range - Starting time setting: 0:00 – 23:00 (hour), 0 – 59 min - Operation Time setting : 0 – 59 min - Temperature setting: Same as Quick Warm Setting ►When data setting is completed, then press button back to main menu B.) Operating Mode User can set time to start the tyres warming on current time. Warming will be started according to time setting. Also, warming will be terminated at designated time which is set by user. 6 6. Lap Timer Race Time Set [ 8 min ] SETUP SETUP ENTER 4.LAP TIMER 1.QUCIK WARM ENTER STOP Ready Lap<_> 00:00.00 00:00.00 UP , DOWN button to set race time. (0~59min) ►Press ENTER Button Twice ►Press DOWN Button for counting (up to 99) ►To stop counting, Press SETUP Button ►Press UP , DOWN Button to check recorded time ►Press UP Button for about 3 seconds, lap data will be all cleared. ►Press ENTER Button for about 3 seconds, back to main mode 7 Time goes up Press ENTER *Run* 02:37.20 Lap<__> 00:00.00 1 lap counted Press DOWN *Run* 00:13.35 Lap<01> 00:13.35 2 lap counted Press DOWN *Run* 00:26.60 Lap<02> 00:13.25 Final lap counted Press SETUP *Ready* 00:39.73 Lap<03> 00:13.13 Recall Data Press UP or DOWN *Ready* 00:39.73 Lap<03> 00:13.13 7. USB: Tyre warmer can be connected to smartphone through USB port. 8. User Set Up * User Setup * SETUP * Batt. Charge * ON 1.0A 8.45V SETUP ENTER MAIN MODE DISPLAY SETUP * Timer Set * 00:00:00 ENTER A.) To access User set up mode, Press SETUP Button for about 3 seconds in main mode. B.) Internal battery charging can be turning On/Off by press UP , DOWN Button under internal battery charging mode. When charging procedure is completed, it will turn off automatically. Battery voltage can be checked at this stage C.) For Current time setting, Data can be set by press UP , DOWN button at time setting screen D.) For Current time checking, Press UP Button for about 3 seconds, current time will be displayed and shown. ** XCEED RC ** E.) Back to main menu, Press UP button again. AM [8:30:25] 8 Xceed Tyre Warmer and Tyres cups had gone through the most rigorous and strictly quality control test and inspection. If any defect/faulty is detected under a regular using condition or caused by manufacturer defect/faulty within a warranty period (1 year), guarantee service/repairing cost will be provided without any cost with present the product Warranty card. To confirm warranty service, completed and return the above Warranty Registration card together with an offical purchase invoice/receipt (included date of purchase) to Xceed-RC Limited either by mail or email is a must WITHIN 7 Days from the date of purchase. Otherwise, the provision service will be voided. Any warranty card other than this will not be accepted. I. Fill in warranty card attached with 1 copy of official purchase invoice/receipt(date of purchase must be shown) and mail back to the address as below, Xceed-RC Limited Room 1304, 13th Floor Hung To Industrial Building 80 Hung To Road, Kwun Tong Kowloon, Hong Kong 9 II. Fill in this warranty card, attached with 1 copy of official purchase invoice/receipt(date of purchase must be shown) and email to [email protected] / [email protected] Xceed-RC Limited will not be liable for any direct or indirect loss or damage to any person or property, howsoever caused arising from improper use, or any stoppage, breakdown of failure of this Xceed Tyre Warmer and cups. Xceed Tyre Warmer is guaranteed for 1 year warranty commencing from the date of purchase invoice. All services beyond the said guarantee/warranty period will be charged according to the service /repair price. This warranty card should retained by end user. If this warranty card and official purchase receipt is failure to present, repair or guarantee service will be on chargeable basis. All terms, stated and implied are subject to change without prior notice. 9. Xceed Tyre Warmer Warranty Registration Card End User’s Name: Contact number: Mailing Address: Postal Code: Country: Email Address: Please select appropriate item: O Item No.: #107015 Xceed Tyre Heater TH2 with cups/cables Qty: O Item No.: #107016 Xceed Tyre Heater TH2 cups/cables only Qty: Date of Purchase: Dealer’s Name : Dealer’s Address: Invoice Date: (Date) (Month) (Year) Invoice No. 10