Preview only show first 10 pages with watermark. For full document please download

Thank You For Purchasing The Tether Table Aero For

   EMBED

Share

Transcript

Thank you for purchasing the Tether Table Aero for the iMac Please read this pamphlet, it contains IMPORTANT safety information. Please read and keep for future reference.    Clean your Tether Table with a damp towel or soft cloth. DO NOT use harsh chemicals or abrasive cleaners. DO NOT allow children to climb or play on the unit. Failure to comply could result in severe injury. Only use product for its intended purpose. Failure to do so could cause injury and will void warranty. This unit has been designed to support maximum loads. Exceeding these load limits could cause unit sagging, instability, product collapse and/or serious injury. ALWAYS refer to studio stand and/or tripod manufacturers’ weight load limits before assembly. Their load limit always takes precedent. INSTRUCTIONS FOR ASSEMBLY Remove preinstalled iMac Stability Bar by unscrewing knobs on the bottom of the table. Insert black thumbscrew into the side of the LAJO-4 ProBracket. The thumbscrew can be positioned to any of the 4 sides under the table; choose your preference. Align the top holes of the bracket with the bottom holes on the Tether Table. With your fingers, begin threading the 4 supplied screws. Once screws are lightly threaded into bracket, use supplied Allen Wrench to securely tighten. Reinstall iMac Stability Bar. ONCE ASSEMBLED      Attach the Tether Table to any 5/8” mount, ¼”-20 thread tripod head, 3/8” thread tripod mount or Arca Style mount attachment. Tighten Thumbscrew knob onto 5/8” post to create stable platform. DO NOT over tighten knob. Remove iMac Stability Bar to use the Tether Table with a laptop computer. When not in use, protect your Tether Table Aero with included custom storage bag. To see a complete list of Tether Tool accessories please visit www.TetherTools.com/accessories To activate your Lifetime Warranty, please take a moment to register your new Tether Table at www.TetherTools.com/register MADE IN THE U.S.A. For help with assembly, identifying parts, product information or to order accessories, please contact us. Tel: 1-888-854-6565 Ext. 2 (in Arizona call 480-949-0808) www.TetherTools.com Email: [email protected]