The

Transcript

INDEX H. LINESMAN TOOLING & ASSORTED EQUIPMENT H1 – H24 TREE TRIMMING – INSULATED KITS EWP STORAGE – TOOL HOLDERS – JAMESON EWP STORAGE – TOOL HOLDERS & BOARDS – JAMESON EWP STORAGE – APRONS & HOOKS – ESTEX STORAGE EQUIPMENT – TOOL BAGS & BUCKETS – ESTEX CROSSARM DRILL & HELICAL TOOL WEDGE REMOVER & DIRT TARP NETS – LOAD CONTAINMENT – SSEA NETS – CYCLONE GUY WIRE REEL & HEADLAMP SIGNALLER TORCH POLE LIGHTING & FLAGS LIGHTING – BATTERY LIGHTING – EMERGENCY WRENCHES – RATCHET WRENCH – IMPACT, BATTERY – IZUMI RESCUE KITS & MATS – LIVE WORKING – BALMORAL ENGINEERING POLETOP RESCUE KITS, BLANKETS & COVERS – LIVE WORKING – BALMORAL ENGINEERING COVERS, DRAPES & BLANKETS – LIVE WORKING – BALMORAL ENGINEERING H1 H2 H3 H4 H5+ H7 H8 H9 H10 H11 H12 H13 H14+ H16 H17 H18+ H21 H22 H23 SYDNEY HEAD OFFICE Adelaide Brisbane Townsville [email protected] [email protected] [email protected] [email protected] 131 WOIDS AVENUE CARLTON NSW 2218 TEL: (02) 9547 1844 FAX: (02) 9547 2236 316 SOUTH ROAD RICHMOND SA 5033 TEL: (08) 8352 8866 FAX: (08) 8352 7257 2/68 NORTHLINK PLACE NORTHGATE QLD 4013 TEL: (07) 3256 6011 FAX: (07) 3256 6055 2/1 CIVIL ROAD GARBUTT QLD 4814 TEL: (07) 4728 8756 FAX: (07) 4725 4380 Darwin Melbourne Perth Port Hedland [email protected] [email protected] [email protected] [email protected] 4/17 WILLES ROAD BERRIMAH NT 0828 TEL: (08) 8984 4453 FAX: (08) 8984 4390 2/18 SOUTHFORK DRIVE KILSYTH VIC 3137 TEL: (03) 9761 4199 FAX: (03) 9761 4966 19 AUGUSTA STREET WILLETTON WA 6155 TEL: (08) 9354 8544 FAX: (08) 9354 8360 4/13 CAJARINA RD WEDGEFIELD WA 6721 TEL: 0417 544 475 FAX: (08) 9354 9360 TREE TRIMMING – INSULATED KITS ALL OF YOUR TREE TRIMMING NEEDS IN ONE BAG Open the tool kit bag and you have your choice of tree trimming tools in the length you need, all in a convenient heavy duty vinyl tool bag that offers long wear and maximum protection for the tools. H LINESMAN TOOLING & ASSORTED EQUIPMENT INSULATED TREE TRIMMING KITS (MADE IN USA) www.specialisedforce.com.au Model No. 4141 4142 4005 4010 Description TREE TRIMMING KIT 1,200mmL x 32mm DIA ROUND FOAM FILLED SECTIONS (electrically tested at factory) TREE TRIMMING KIT 1,800mmL x 32mm DIA ROUND FOAM FILLED SECTIONS (electrically tested at factory) Optional ROPE INSULATOR 860mmL ROPE INSULATOR 1100mmL Rope Insulator for up to 33kV Model No. HF4110 Rope Insulator for up to 66kV Model No. HF4005 H1 Weight 6.8kg 8.6kg 0.136kg 0.136kg Kit Qty 4141 4142 4 4 1 1 1 1 Model No. HF546-4 HF546-6 HF4125 HFA18007 1 1 HFA10012 1 1 1 1 1 - 1 1 1 1 1 HFP10046 HFA11000 HFA10016 HFA30007 HF01-020 HF01-021 Description Stick Ext 1.2m Stick Ext 1.8m Cutter Head Stick Base Cap Adaptor Universal Head Universal "S" Hook Saw Pruning Universal Handle Universal Saw Scabbard for Saw Carry Bag 1.2m Sticks Carry Bag 1.8m Sticks EWP STORAGE – TOOL HOLDERS LINESMAN TOOLING & ASSORTED EQUIPMENT BOOM MOUNTED TOOL HOLDERS (MADE IN USA) Take the tools out of the bucket and mount them on the boom for safe, convenient access. Made from high impact plastic, Jameson’s boom-mount tool holders can be strapped to round or square booms All boom mount tool holders include the Jameson Handle Unit. This web strap and ratchet lock clamp fastens the hydraulic tool securely into a fixed position on the boom. Its rubberised liner prevents the tool handle from sliding out of the upper holder box. Fits round and square booms. Nylon Ratchet Strap Model No. 24-09R H Saw Holder Model No. 24-08R Circular Saw Holder Includes Handle Holder (24-08R) Model No. 24-02 Model No. 24-08R 24-09R 24-03F 24-03 24-02 24-04 Long-Reach Pole Saw Holder Suits Stanley Style Saws Model No. 24-03 24-04 Hydraulic Pruner Holder Includes Handle Holder (24-08R) Model No. 24-04 Description Saw Handle Holder Nylon Ratchet strap Long Reach Pole Saw Holder Suits Greenlee/Fairmont Style Saws Long Reach Pole Saw Holder Suits Stanley Style Saws Circular Saw Holder Includes Handle Holder (24-08R) Hydraulic Pruner Holder Includes Handle Holder (24-08R) Size (mm) 203 x 114 178 x 89 Weight (kg) 0.6 0.4 813 x 102 3.0 813 x 102 1.9 305 x 178 305 x 190.5 2.0 2.0 www.specialisedforce.com.au Long-Reach Pole Saw Holder Suits Greenlee/Fairmont Style Saws Model No. 24-03F H2 www.specialisedforce.com.au H LINESMAN TOOLING & ASSORTED EQUIPMENT EWP STORAGE – TOOL HOLDERS & BOARDS H3 AERIAL BUCKET MOUNTED TOOLHOLDERS (MADE IN USA) Jameson’s heavy duty bucket mount tool holders offer safe, convenient storage for bucket truck tools. Water repellent and UV resistant, they are designed to withstand extreme weather conditions. Bucket Tool Holders feature an Adjustable Clamp Bracket that fits any size bucket, with or without liner, and mounts inside or outside bucket. Chainsaw Scabbard Model No. 24-14A Slide in adjustable dividers Impact Wrench Holder Model No. 24-12A Impact Wrench Holder with Scabbard Model No. 24-12AH Tool Tray Model No. 24-17 Removable Liner Chainsaw Scabbard with Removable Liner Model No. 24-14L Model No. 24-12A 24-12A 24-17 24-14L 24-14A 24-15 24-15D 24-25 2Double Pocket Tool holder Model No. 24-15D Description Impact Wrench Holder Impact Wrench Holder with Scabbard Bucket Mounted Tool Tray Chainsaw Scabbard with Removable Liner Chainsaw Scabbard Single Pocket Tool holder (not shown) Double Pocket Tool holder Tool Board Size (mm) 254 x 125 x178 762 x 280 x 229 584 x 356 x 203 890 x 203 x 152 850 x 127 559 x 229 x 178 559 x 229 x 229 571 x 457 Tool Board Model No. 24-25 Bucket Lip Max (mm) 95 95 81 89 89 73 73 71 Weight (kg) 1.2 2.2 3.2 2.1 2.0 1.8 3.0 2.5 EWP STORAGE – APRONS & HOOKS Estex is a solutions provider in the storage and management of tools TOOL APRONS Estex has designed a series of tool aprons with multiple pocket configurations to fit inside the bucket. They were designed to fit flat against the liner to minimise interference with line work yet maximise a linemen’s ability to reach the necessary tools. Each apron has a non-conductive rod in the top for support as well as two brass grommets. INOSIL ANTI CORROSIVE SHEILD Model No. 1829-AP-2 1829-HB-7 Description Tool Apron-Yellow w/multiple pockets Tool Apron-Black INOSIL w/multiple pockets & hard body H Black INOSIL Tool Apron with hard body and Multiple pockets Model No. 1829-HB-7 Size (mm) 724 x 102 x 673 607 x 102 x 540 Weight (kg) 2.3 3.0 HANGING HOOKS Model No. 1830 Model No. 1831 Model No. 1842 Model No. 1842-1 Model No. 1843 Model No. Description 1830 1831 1842 1842-1 1843 1849 Polymer Hook 17.5mm Dia Polymer Hook 17.5mm Dia PVC Hook 16mm Dia PVC Hook 19mm Dia PVC Hook 16mm Dia PVC Hook 19mm Dia PVC Cross Arm Hook 19mm Dia Also suitable for 95.25mm wide bucket lips PVC Hook 19mm Dia 1849-OE 1849-OE-1 Model No. 1849 Model No. 1849-OE Model No. 1849-OE-1 Bucket Lip Size (mm) 55.00 76.00 76.00 76.00 100.00 Weight Approx. (kg) 0.2 0.2 0.2 0.2 0.2 0.2 95.25 0.2 100.00 0.2 www.specialisedforce.com.au Yellow Vinyl Tool Apron with Multiple pockets Model No. 1829-AP-2 LINESMAN TOOLING & ASSORTED EQUIPMENT STORAGE EQUIPMENT (MADE IN USA) H4 STORAGE EQUIPMENT – TOOL BAGS & BUCKETS H LINESMAN TOOLING & ASSORTED EQUIPMENT STORAGE EQUIPMENT (MADE IN USA) BAGS AND TOOL BUCKETS All Estex tool bucket are made of heavy duty canvas or vinyl coated nylon for long wear and use. The top ring is a single piece moulded, non-metallic material designed to stay open even under severe and continuous load. The bottoms are made of high impact polymer resins or leather. The bag has leather side supports at the rope holes and a unique Estex feature whereby the bottom is stitched on and the body of the bag is folded back over the stitches to protect the threads from abrasion and excessive wear. This has the added benefit of providing a smooth padded area at the bucket bottom. Otherwise, your bucket becomes a rough sharp source of wear on the bucket truck and on the aerial bucket. The bucket also has Strong UV resistance and rot resistant rope handle Hose Bag Model No. 2630 Model No. 2630 1863 www.specialisedforce.com.au 1807-1 H5 Hydraulic Crimper Holder Model No. 1863 Description Hydraulic hose bag, heavy weight vinyl Hydraulic low pressure crimper holder heavy weight vinyl bag Heavy duty canvas tool bucket for bolt cutters & compression tools, hard body plastic, 5 compartments Hydraulic Crimper Holder Model No. 1807-1 Dimensions (mm) 432 x 89 x 470 200 diam. opening x 400High Weight (kg) 1.8 406 x 229 x 508 2.3 4.1 TOOL BUCKETS Miniature Tool Bucket Model No. 2009 Vinyl Tool Bucket Model No. 2059-V-HB Canvas Tool Bucket Model No. 2022 Model No. Description 2009 Miniature tool bucket, without pockets Heavy duty canvas tool bucket, moulded top ring & bottom, polypropelene handle without pockets Tapered heavy duty canvas tool bucket, moulded top ring & 2050-S-1P bottom Vinyl tool bucket with plastic bottom, 14 pockets, rope 2059-V-HB handle and snaphook 2022 Tapered Canvas Tool Bucket Model No. 2050-S-IP Dimensions (mm) 127 Ø opening x 152High 203 Ø opening x 305High 305 Ø opening 203 Ø bottom x 305h 304 Ø opening x 304High Weight (kg) 0.9 1.0 1.1 1.3 STORAGE EQUIPMENT – TOOL BAGS & BUCKETS LINESMAN TOOLING & ASSORTED EQUIPMENT TOOL BUCKETS & STORAGE (MADE IN USA) FIRE RESISTANT Oval Tool Bucket (FR) Model No. 1810-FR-C Hard Body Oval Tool Bucket Model No. 1820-HB-C Canvas Oval Tool Bucket Model No. 1820 INOSIL ANTI CORROSIVE SHEILD Canvas Splicers Oval Tool Bucket Model No. 1815-14 Splicers Tool Bucket Model No. 2059 Canvas Tool Carrier Model No. 2196-2-TVA Canvas Tool Bags Model No. 2113-20 Model No. 2113-22 Canvas Tool Bag Model No. 2113-24 Model No. Description Oval tool bucket, fire retardent, hard body liner, w/cover and 1810-FR-C stabaliser Oval tool bucket, w/hard body liner & cover 1820-HB-C (15 inside pockets) Heavy duty canvas oval tool bucket, 1820 w/pvc side supports (15 inside pockets) Splicers cordura oval tool bucket (inosil) 1815-14-7 (15 pockets inside / 14 pockets outside) Splicers canvas oval tool bucket 1815-14 (15 pockets inside / 14 pockets outside) Splicers heavy duty canvas tool bucket moulded top ring & 2059 bottom, polypropelene handle, (14 pockets outside) Canvas tool carrier, w/shoulder strap 2196-2-TVA (20 pockets inside / 2 large pockets inside) Heavy duty canvas tool bag, steel frame, 2113-20 hard base, leather strap closure (508mm long) Heavy duty canvas tool bag, steel frame, 2113-22 hard base, leather strap closure (559mm long) Heavy duty canvas tool bag, steel frame, 2113-24 hard base, leather strap closure (610mm long) Dimensions (mm) Weight (kg) 381 x 178 x 229 1.6 381 x 178 x 229 1.2 381 x 178 x 229 1.1 381 x 178 x 229 1.7 381 x 178 x 229 1.3 305 x 305 1.4 467 x 222 x 229 0.9 508 x 229 x 356 1.9 559 x 254 x 356 2.1 610 x 254 x 356 2.2 www.specialisedforce.com.au H Splicers Oval Tool Bucket (INOSIL) Model No. 1815-14-7 H6 CROSSARM DRILL & HELICAL TOOL H LINESMAN TOOLING & ASSORTED EQUIPMENT MODEL No. ME-CAD1 CROSS ARM DRILL Designed to drill over a king bolt and assist in the removal of wooden crossarms from power poles. SPECIFICATIONS Model No. ME-CAD1 Mass Main Body: High strength precision tube Hex and drill head: High tensile steel, heat treated for additional strength and durability Attachments: 10mm Titanium carbide Approx. 1.2kg Maximum Bolt Size 24mm Dia. OAL Dimensions (mm) 375 L x 48 Ø x 34 Hex (A/F) Weight (kg) 1.2 Material FEATURES • High strength, light weight design • For use with 1/2” drive adapter • Replaceable drilling inserts incorporated into the design of the drill head held in place with Torx screws for ease of replacement (1 set included, additional inserts and Torx screws may be purchased in sets of 10). Torx Screwdriver not included • Inbuilt drilling support to increase stability and minimise vibrations during drilling procedures • Improved design for rapid chip removal • Designed in conjunction with Australia’s leading power companies • For use with hydraulic impact wrench or electric power drill www.specialisedforce.com.au MODEL No. ME-HTT1 HELICAL TERMINATION TOOL H7 Specially designed and field tested in collaboration with field crew of a major power company, for the winding and unwinding of helical fittings for guy wire and other large conductors. FEATURES • Strong, lightweight aluminium body • Ergonomically designed for effortless winding and unwinding of helical fittings for guy wire and other large conductors • Hanging hole at the rear of the tool for easy storage or attachment to tool belt as required • May be anodised in a range of colours (optional) Model No. ME-HTT1 Material Lightweight corrosion resistant aluminium Overall Dimensions (mm) 55 Ø x 340 L Weight (mm) 0.4 WEDGE REMOVER & DIRT TARP Aids in the removal of Ampact Wedge connectors from “C” members. FEATURES • Impact resistant hammer pin treated for strength and corrosion to prolong fatigue life of tool • Spring loaded for ease of use • Solid, heavy duty mild steel body capable of absorbing impact Material Overall Dimensions (mm) Weight (mm) ME-WRT1 Mild steel body, tool steel hammer pin 225 x 112 x 24 “AMPACT WEDGE CONNECTOR” 1.5 MODEL No. 2864-8DTR-SF DIRT LIFTING TARP (MADE IN USA) FEATURES H • Heavy duty safety orange rip-stop canvas with double stitched reinforced webbing • Tested to AS3668-1989 Appendix D • Multi-trip use • Keeps worksite clean and keeps soil/dirt off pedestrian walkways • Easily empty boring auger dirt and return dirt to same hole by releasing a single strap during pole change overs • Folds up for truck compartment storage • Manufacture Label with Rating/Care/Warning • Certified, Cyclic Load Tested Over 70 Times! SPECIFICATIONS Dimensions 2.4m x 2.4m WLL 1350kg Colour Safety Orange Certified, cyclic load tested over 70 times! Manufacture label with rating/care/ warning Laid flat Folded up for easy storage www.specialisedforce.com.au Model No. LINESMAN TOOLING & ASSORTED EQUIPMENT MODEL No. ME-WRT1 AMPACT WEDGE REMOVAL TOOL H8 NETS – LOAD CONTAINMENT www.specialisedforce.com.au H LINESMAN TOOLING & ASSORTED EQUIPMENT LOAD CONTAINMENT NETS H9 Contain packages and loose items in the back of your Truck, Ute or Trailer TESTED & APPROVED BY GLOBAL MARK IN AUSTRALIA Type POLYETHYLENE (PE) Model No. LCNPE1.8X1.5 LCNPE1.8X2.4 LCNPE2.0X2.4 LCNPE2.1X2.1 LCNPE2.4X2.4 LCNPE2.2X2.6 LCNPE2.0X3.0 LCNPE2.4X3.0 LCNPE4.0X3.0 LCNPE5.0X3.0 LCNPE6.0X3.0 LCN-TIE DOWN 11 Sizes Available (Blue) has a Strand & Knotted appearance Size (m) 1.8x1.5 1.8x2.4 2.0x2.4 2.1x2.1 2.4x2.4 2.2x2.6 2.0x3.0 2.4x3.0 4.0x3.0 5.0x3.0 6.0x3.0 10 ropes per Pack Break Force (kg) 68 BLUE NET (PE) SHOWN IN CARRY BAG TIE-DOWN ROPES AVAILABLE (10 PER PACK) Model No. LCN-TIE DOWN PLEASE NOTE: THIS PRODUCT OFFERS EXCELLENT CONTAINMENT, BUT IN NO WAY EXEMPTS THE USE OF ADEQUATE APPROVED RESTRAINT METHODS ANTL TESTED (AUSTRALIAN NATIONAL TESTING LABORATORY) Please contact your nearest Specialised Force Branch or visit our website for a copy of the Certificate and MSDS TIE-DOWNS CAN BE USED TO BUNCH EXCESS NETTING NETS – CYCLONE For containment of equipment, materials or debris in the event of a possible storm or cyclone FEATURES • UV treated polyethylene construction • 100 x 100mm square, custom sizing available • Available in Black (best UV resistance), other colours available upon request (Green & Blue) • Standard size 10 x 10m, custom sizing available • In house load tested UNCONTAINED ITEMS ON SITE, PROPERTY OR YARD ARE A HAZARD TO EVERYONE DURING STORM SEASON ORDERING* Model No.: LCCN10X10-BK LCCN10X05-BK LCCN05X05-BK Size 10 x 10m 10 x 5m 5 x 5m Description Cyclone Net, Black Polyethylene 10 x 10m Cyclone Net, Black Polyethylene 10 x 5m Cyclone Net, Black Polyethylene 5 x 5m * Securing equipment not included or provided CERTIFIED LOAD CONTAINMENT NETS ALSO AVAILABLE Weight (kg) 19.1 9.6 4.8 www.specialisedforce.com.au Cyclones, storms and strong winds can cause severe damage, especially from unsecured items. Minimise the damage and danger to others and property by securing loose equipment with SSEA Cyclone netting. H DETAILS LINESMAN TOOLING & ASSORTED EQUIPMENT HEAVY DUTY CYCLONE NETTING H10 GUY WIRE REEL & HEADLAMP H LINESMAN TOOLING & ASSORTED EQUIPMENT ROBOREEL - GUY WIRE REEL (MADE IN USA) GUY WIRE Model No. 5415 & 5276 TRIPLEX Model No. 5478 BASE PLATE Model No. 5074 GUY WIRE & BASE PLATE SHOWN TOGETHER REELS Provides an easy and safe means to unwind and rewind guy wire and cable on rugged, all-weather heavy-duty reels. Made of steel and zinc coated. Features four adjustable arms (Guy Wire) or eight adjustable arms (Triplex) that allow easy and secure means of loading, unwinding and rewinding various coils with different diameters. Coils can be simply rolled into the stand and clamped into place with the adjustable arms. Wire is easily pulled or rewound through “smooth” centre guides. BASE PLATE Can be installed on wall or floor with base plate sold separately. Securely and easily mount or remove your reel. Slide reel into base plate and a spring loaded latching system provides a secure means of holding the reel during transport. Ideal accessory to quickly remove or remount. Model No. Description Features Accepts Coils Outside/Inside Dia. (mm) Dimensions (mm) HxDxW Wt (kg) 5276 5415 5478 5074 Guy Wire Reel for 12.7mm OD Guy Wire Reel for 12.7mm OD Triplex Wire Reel Base Plate 4 Adj. Arms 4 Adj. Arms 8 Adj. Arms - 559-787/(Widths Up to 121mm) 813-915/(Widths Up to 222mm) 660-813/356-508 - 857x235x819 857x235x819 876x356x851 - 18.6 20.1 26.4 3.0 MODEL NO # 7625 HEADLAMP (MADE IN USA) www.specialisedforce.com.au The number 1 helmet light for Industrial Workers & Utility Linemen is now even better! The Ultimate III has two times the lumens and longer burn times! H11 FEATURES • Extremely Bright 50 Lumens • Intrinsically Safe (Class 1 Div. 1) • Lightweight & Waterproof • Four Light Modes(high, medium, low, flashing) • Adjustable Beam • Extremely Rugged & Chemical Resistant • Stretch Rubber • Head Band Kit • Secure Helmet Mounting Utilising a unique “Superbrite LED” and proprietary optics, the ULTIMATE III is optimal for both localised needs and long distant spotting requirements (in fact, it is so powerful on the high setting that it can be used as a flashlight). Realising that workers need different amounts of light for different conditions and situations – the ULTIMATE III is equipped with three brightness levels and a blinking emergency/signalling mode. SPECIFICATIONS • Power: 50 Lumens • Lamp: Shock Resistant LED • Batteries: 3 AAA Alkaline • Burn Time: 60 + hrs (low) • Weight: 105 g SIGNALLER TORCH All units are supplied with both AC and DC battery chargers. Warranty:12 months from date of purchase. Model No. Lights Type RGWA White, Green, Red and Amber LEDs and torch. White, Green and Red LEDs and torch. Standard RGW Special NOTE: Custom built models available upon request. Kit Includes All Items • Torch • Shoulder Strap • Instruction Manual • 230 VAC Charger • 12 VDC Charger Light Colour White Green Red Amber Lumens 430 215 215 215 RAILWAY DESIGN. NOW WITH FREE STANDING ADJUSTABLE BASE Lux 8,000 4,000 4,000 4,000 MODEL NO. TWINLEDWHITE Specially designed bright LED torch for maintenance personnel which has the same features as the Signaller torch above but has; • 2 light modes (white only) • Built in protection power supply • Wall mount plate and wires for permanent mounting on wall or in vehicle • Centre superior “CREE” LED’S • Ideal for workshops H The standard units come with green, red, amber and white LEDs. The torch is powered by a 6volt 4Ah rechargeable battery with up to 30 hours life per full battery charge. They are weather proof and come with adjustable stand and carry strap. www.specialisedforce.com.au The SIGNALLER is a lantern and torch combined. It has multiple LEDs for greater light concentration that is visible for up to 2km. LINESMAN TOOLING & ASSORTED EQUIPMENT RGW SERIES SIGNALLER TORCHES (INDUSTRIAL, RAIL, MINING & UTILITIES) H12 POLE LIGHTING & FLAGS H LINESMAN TOOLING & ASSORTED EQUIPMENT “POLE BUG” LED STROBE LIGHT & 2-FLAG HOLDER Using effective, long lasting LED technology - these LED’s are rated for 100,000 hours of heavy duty operation providing a reliable pole mount transportation device. The single bright RED LED (also available in Amber), with a 8-11km visibility range, includes four flash patterns: Comet, Single, Steady Burn and Flare Flicker. The light module is encapsulated for vibration and moisture resistance with dual front/angled reflectors. The lights can be viewed from the back and sides. The system is powered by three alkaline “C” batteries allowing the 100+ hours of continuous operation. Easy to attach and deploy, using heavy duty strap that attaches to all type of poles and sizes. Additional features include powder coated metal components and dual flag holders. Includes batteries and two red flags. FEATURES • Red or Amber LED Light: Four Flash Patterns • LED Rating: 100,000 hours • Batteries: Three Alkaline “C” size • Battery Run Time: 100+ Hours Model No. 7015-R (Red) 7015-A (Amber) LIGHT – POLE TRANSPORT POLE TRANSPORTATION, “LED 360°” STROBE LIGHT & 2 FLAG HOLDER DESCRIPTION www.specialisedforce.com.au 360 degree LED strobe utilizes 24 long lasting LEDs to create a high visibility 60 flashes per minute strobe. H13 LED Strobe is powered by 2 “D” batteries. System is easy to attach and deploy, using a heavy duty strap that attaches to all type and sizes of poles. Additional features include powder coated metal components and dual flag holders. Includes batteries and two RED flags FEATURES Systems are compact and designed to be stored on your vehicle! • Red or Amber LED Light • LED Rating: 100,000 hours • Batteries: Three Alkaline “D” size • Battery Run Time: 100+ Hours • Great for Mid Pole or rear protection • Very low profile Model No. 7167-R (Red with Flag Holders and 2 RED Flags) 7167-A (Amber with Flag Holders and 2 RED Flags) LIGHTING – BATTERY Available in a range of sizes to suit all applications, the largest unit generates an incredible 24,000 lumens spread over 100m. These LED floodlights are a safe alternative to halogen based equipment. Each of the range offers HIGH/LOW/FLASHING options and is designed to pulse every 30 seconds when the battery is running low. It comes with a red “stand by” LED allowing the user to locate the lamp when not in use. Model No. 18880P 18881P Light Output 3000 / 1500 lumens 6000 / 3000 lumens 18x CREE® LEDs Light Source 18x CREE® LEDs Beam Spread 30° – 120° 60° – 240° Running Time 9hrs (High) 18hrs (Low) 36hrs (Flashing) 900hrs (Standby) 4.5hrs (High) 9hrs (Low) 18hrs (Flashing) 450hrs (Standby) Charge Time (hrs) Battery 7hrs 7hrs 12V 24Ah lead acid 12V 24Ah lead acid* Head Size (mm) L300 x W58 x H248 L300 x W58 x H248 Case Size (mm) L455 x W315 x H365 L455 x W315 x H365 Extendable Height (mm) Min 1145 / Max 1945 Min 1145 / Max 1945 Product Weight (Kg) 16 23 Approvals CE CE Supplied and incorporated in a specialist robust outdoor case, which is covered by an unlimited lifetime guarantee. The Solaris complete system can be assembled within seconds. • 18 High powered CREE® LEDs • Advanced focused optics for intensified light; creating 3 times more power • IP65 • Robust and weatherproof construction • 50,000 hours LED lifetime • Low heat emission and environmentally friendly lighting source • Low voltage 12V safe operation • 360° swivel and 180° tilting head • Can operate on power sources between 10V - 30V • High impact ABS weatherproof case (In-line wheels and telescopic handle applies to DUO (38 A/h) and QUATTRO only) • Supplied with head, case, mast, power source and mains charger MAST • 4 section extendable mast with 360° tilt and turn rotating head • Quick lock/release system • Extends from 500-1300mm. Maximum height when fitted on case 2245mm • Linkable, for extended height OPTIONAL EXTRAS • 16A Single charger enabling use of one head, whilst charging • Car adapter / 5m extension lead • Magnetic base • Mounting clamp • Multicharger • Infra-red LEDs • Coloured filters • Flashing mode • Solar panel • Different lens for wider or narrower beams • Additional power supply enabling head to run directly from a 230V power source H HEAD Solo #18880P Duo (38) # 18881P www.specialisedforce.com.au The Solaris Range is Nightsearcher’s new generation of portable rechargeable lighting systems. The newly designed head, fitted with 18 LEDs, offers individual optics per LED to maximise light coverage and minimise glare. LINESMAN TOOLING & ASSORTED EQUIPMENT SOLARIS BATTERY LIGHTING H14 LIGHTING – BATTERY www.specialisedforce.com.au H LINESMAN TOOLING & ASSORTED EQUIPMENT LED FLOODLIGHT H15 FEATURES The LED WORKBRITE is a fully portable and rechargeable floodlight. The pivoting head, with 180 LEDs, offers a bright white beam. Using a rechargeable lead acid battery, the light will operate for 3.5 hours on full brightness, and 6+ hours at a reduced brightness. Compact and lightweight, this unit is easy to carry and both chargers can be stored inside the back of the head for easy transportation. Cool operation and unlike generator powered lighting there is no noise or pollution giving an energy efficient solution for a greener future. • 2000 lumens • 180 bright LEDs – up to 100,000 hour life • Operates for 3 to 6+ hours • Quick recharge • Battery charging indicator • Battery over charge protection • Cool operation, suitable for confined or limited spaces • 110° adjustable light head • Impact resistant plastic housing – robust and weatherproof • Compact – chargers can be stored in the back of the head SPECIFICATIONS Model No. NSLEDWORKBRITE Light output 2000 lumens Light source 180 LEDs Battery 4V 7A/h lead acid Running time 3.5 to 6+hrs Charge time 8hrs Product weight (kg) 2.3 Product size (mm) L306 x W258 x H457 Boxed size (mm) L270 x W130 x H330 Boxed weight (kg) 2.6 Supplied with: Mains and vehicle chargers Optional Extras: Tripod 1.7m (Model No. NSLEDWORKBRITE) Folds for easy transport LIGHTING – EMERGENCY They are virtually indestructible (withstanding most vehicle weights if run over). Incorporating strong magnet to allow attachment to vehicles etc. Ingeniously designed, the PULSAR is charged within its case, using either mains or vehicle charger. • Rechargeable LED emergency lights • Available in sets of amber, blue, green, red or infra-red • 16 LEDs per PULSAR • 9 different flashing patterns including rotating, flashing and SOS • Visible from any angle, from a distance up to 300 metres • Shock resistant housing, able to withstand most vehicle weights • Waterproof, can be submerged to a depth of 10 metres • Incorporating a strong magnetic base • Rechargeable Li-ion batteries • Charged directly in the storage case • Battery charging indication Model No. Light source Battery Charge time (hrs) Product size(mm) Product weight (kg) Operation Mode 1 – Rotate 2 – Quad Flash 3 – Single Blink 4 – Alternating Blink 5 – SOS 6 – Constant On High 7 – Constant On Low 8 – 2 LED Flashlight 9 – 4 LED Flashlight NSPULSARB (Blue) NSPULSARR (Red) NSPULSARY (Amber) NSPULSARG (Green) NSPULSARIR (Infrared) (THE ABOVE COME AS A SET OF 6) Coloured LED (Life time up to 50,000hrs) Li-ion 3.7V 1-3 Pulsar: 2-6 hrs 4-6 Pulsar: 12-14 hrs Pulsar L180 x W108 x H35 Kit L444 x W368 x H64 Pulsar 0.19 Kit 3.00 Run Time (fully charged) 9hrs 9hrs 60hrs 9hrs 14hrs 5hrs 35hrs 9hrs 6hrs Supplied with: Mains, vehicle chargers and charging case H Supplied as a set of 6, these small but robust lights are manufactured in shock resistant plastic housing, are waterproof to a depth of 10 metres, and will float. www.specialisedforce.com.au The Pulsar 6-pack rechargeable LED hazard warning lights are designed so they can be quickly deployed to warn traffic or direct traffic away from hazards. LINESMAN TOOLING & ASSORTED EQUIPMENT EMERGENCY RECHARGEABLE LED HAZARD LIGHTS H16 WRENCHES – RATCHET www.specialisedforce.com.au H LINESMAN TOOLING & ASSORTED EQUIPMENT WRENCHES – STANDARD & UTILITY H17 DOUBLE SIDED PODGER RATCHET WRENCHES Model No. 64110 64111 64114 64117 64118 64119 64121 64122 64124 64127 64128 64132 64135 64146 61624 Size (mm A/F) 10 x 12 11 x 13 14 x 15 17 x 19 18 x 24 19 x 24 21 x 23 22 x 24 24 x 30 27 x 30 27 x 32 32 x 36 38 x 41 46 x 50 ½” Male to ¾” Male Opening 12 POINT n/a Length (mm) 240 240 280 315 360 360 360 360 360 425 425 425 485 485 400 To order pawl and spring add “R” to the end of the part number (eg. 64117-R) UTILITY RATCHET WRENCHES Model No. 61317-6P 61317-6PL BY3 Size (mm A/F) 13 x 17 13 x 17 17 x 19 x 24 x 30 (4 in 1 spanner) Notes 6 Point Hex with Acetate Handle for IPC’s Ideal for Pole Work Length (mm) 180 280 285 #BY3 (Made in Japan) #61317-6P FOR IPC’S #61317-6PL #19 #30 #24 #17 WRENCH – IMPACT, BATTERY FEATURES The SB-3UK is a battery operated impact wrench especially designed to torque down the shear bolts or IPC’s (Insulation Piercing Connectors) for electrical connection use. The tool features a unique shape to reduce its length for easy access to tight space. It develops 196 Nm of torque and features variable speed to 2,200 rpm. As it was designed for electrical work, there is no opening for air circulation. Continuous use will overheat and damage the tool. Rest the tool after 20 bolts are sheared. DETAILS SPECIFICATIONS Torque Speed Motor Socket Retainer 196 N.m 0~2,200 rpm 14.4 VDC 1/2” square drive 350 (L) x 180 (H) x 75 (W) mm 2.2 kg SIZE WEIGHT ORDERING INFORMATION (Refer pages A10 for Battery & Charger details) Model No.: SB-3UK (BB) For lithium-ion kit Includes: Wrench Unit, Plastic Carrying Case, 2 x Lithium-Ion Batteries (BP-80LI) and 12/24VDC230VAC Charger (CH-100) SU P PO IA & WI DE PROUD LY ED ED, SER KET VI C AR M www.specialisedforce.com.au H • Battery operated impact wrench for shear bolts • 196Nm torque • Variable speed to 2,200 rpm • 1/2” square drive • Short body length for tight space application • Well balanced and light weight • 14.4V battery • Quality backed by ISO 9001 Quality Management System IPC WRENCH LINESMAN TOOLING & ASSORTED EQUIPMENT MODEL No. SB-3UK IPC/SHEAR BOLT IMPACT WRENCH RT ED AUST RA L H18 WRENCH – IMPACT, BATTERY www.specialisedforce.com.au H LINESMAN TOOLING & ASSORTED EQUIPMENT BATTERY IMPACT WRENCH (MADE IN USA) H19 MODEL No. 5600 The lightest weight-to-power cordless impact wrench on the market. Small, powerful and durable. It can handle all your hardware drilling needs. Ergonomically designed with easy grip cushion handle. Allows use in environments where hoses and cords are unsafe or inconvenient. FEATURES • Cushion handle • Lightweight • Powerful • Quick change chuck 7/16” • 2 x Impact Adaptors (7/16 to 1/2”, Model No. 2801) TWO DRILLS IN ONE 2 x 2801 Blue Bully Impact Adaptors Included in Kit SPECIFICATIONS Model No. Description of Supply Power Option 5600 Kit – Tool, 2 Batteries, Charger (230VAC) , 2 x Impact Adaptors (7/16 to 1/2”) & Case Battery ACCESSORIES & SPARE PARTS Model No. 4419 3419 4420 Description Charger 230VAC Battery 19.2VDC DC/AC Inverter Accepts Bushranger Impact Augers with 7/16" quick change shank Battery Voltage Hex Chuck Torque Range Unit Wt (VDC) (“) (Nm) (kg) 19.2 7/16 475 2.6 WRENCH – IMPACT, BATTERY Offers superior power, performance, versatility and durability. Unmatched in performance, the Cordless Roboimpact is the most powerful tool of its kind in the world. Whether overhead, on the ground, or even underground, it can be used in the most demanding drilling and hardware applications. Model No. 2801 1/2”-7/16” Sq Drive adapator included FEATURES H • Heavy-Duty Proprietary Motor and Gearing - Powerful 30 amp reversible motor provides in excess of 2500 rpm of torque for drilling and hardware applications. • Hex Quick-Change - Accepts standard 7/16” hex bits and 1/2” Impact Adaptor (#2801) • Extended Run Time Hilti Battery - Powered by state-of-the-art Hilti 36 volt battery. Advanced technology provides greater working capacity and longer cycle life. Battery can also be used with Hilti TE 6-A 36v Cordless Rotary Hammer Drill. • Military Switch and Handle - Reversing single speed switch located on high strength, impact resistant handle. • Two Position Side-Handle - For increased comfort and control. SPECIFICATIONS PO IA P RT ED AUST RA L www.specialisedforce.com.au WI DE PROUD LY ED SU Refer to page C8 for impact adaptors Refer to page C7 For bushranger impact augers ED, SER KET VI C AR M & 2736(AA) 36V 515+ 2500+ 7/16” quick-change 3.0Ah Li-ION 438 x 82 x 280 Tool (#2736), 2 Batteries Li-ION (#2756), Includes 230VAC Charger (#4372), Impact Adaptor Drive (#2801) & Case Weight of Tool & Battery (kg) 6.15 Model No Voltage Nm of Torque Impacts Per Min Chuck Cordless Battery Capacity Dimensions (mm) LINESMAN TOOLING & ASSORTED EQUIPMENT MODEL No. 2736 (AA) IMPACT WRENCH H20 RESCUE KITS & MATS – LIVE WORKING www.specialisedforce.com.au H LINESMAN TOOLING & ASSORTED EQUIPMENT LIVE WORKING MATS H21 balmoral engineering LV RUBBER MAT MODEL No.: 18001 DESCRIPTION 1m x 1m x 6mm thick, conforms with AS 2978 Class “A” maximum use 650V. High grade black EPDM rubber, UV resistant, non-slip finish. Each mat individually tested and stamped, certificate available on request. Utilised by electrical workers for standing on when working in front of pits, pillars, kiosks, substations, street light columns, switchboards and panels. HV RUBBER MAT MODEL No.: 18040 DESCRIPTION 1m x 1m x 3mm thick, conforms with IEC 61111 Class “3” maximum use 26.5kV. High grade grey NR/SBR rubber, non-slip finish, flexible and light weight. Each mat individually tested and stamped, certificate available on request. Utilised by electrical workers for standing on when working in front of switchboards and panels. LOW VOLTAGE RESCUE KITS MODEL No.: 11002 Kit Contains: • LV Crook • LED Torch • Fire Blanket • LV Rubber Gloves • “Isolate Here” Tag • Multi Trauma Dressing • Storage Bag and CPR Card DESCRIPTION Used for safe emergency rescue of victims of electric shock or other injuries on LV switchboards and electrical apparatus. All components meet relevant standards, the crook has been tested to 5KV and the torch is non-conductive. POLE TOP RESCUE KITS Model No. 11006 balmoral engineering State NSW* Pole top rescue kits made to state specifications*. Contains bag, resuscitation chart, body belt/pole strap, knife, rope, 1000V insulated gloves, etc. *O  ther state kits available, contact Specialised Force for more information LOW VOLTAGE BLANKETS, COVERS & DRAPES An extensive range of high quality PVC and EDPM compounds utilised by utilities and electrical contractors to provide a temporary electrical insulation barrier during maintenance of pits, substations, switchboards, streetlights, pillars, busbars, transformers and metering. LINESMAN TOOLING & ASSORTED EQUIPMENT POLETOP RESCUE KITS, BLANKETS & COVERS – LIVE WORKING Model No. Description Length (m) Width=W/Drop=D (mm) Material Fastening 2001 2003 2004 2006 2009 3001 3002 3003 3004A 3005 4001 4004 5001 5002 5003 5004 7001 7002 7004 7008 8001 8002 8006 8007 8010 8016 LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Point of Attachment Cover LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Line Cover LV Point of Attachment Cover LV Cross Arm Cover LV Coaxial Catenary Cover LV Cross Arm Cover LV Cross Arm Cover LV Fuse Link Cover LV Coaxial Catenary Cover LV Coaxial Catenary Cover LV Fuse Link Cover LV Fuse Link Cover LV Fuse Link Cover 1200 1200 1200 600 600 1200 1200 1200 1200 1200 1200 1200 1500 1500 1500 600 1200 1200 1200 1200 600 600 600 850 850 400 225 D 225 D 225 D 225 D 450 W 300 D 300 D 300 D 300 D 600 W 375 D 375 D 225 D 225 D 225 D 450 W 375 D 225 D 225 D 225 D 375 D 225 D 225 D 850 W 700 W 400 W PVC PVC EDPM EDPM PVC PVC EDPM EDPM PVC PVC PVC PVC PVC PVC PVC PVC PVC EDPM EDPM PVC PVC PVC PVC PVC EDPM PVC Studs Magnets Velcro Velcro Studs Velcro Magnets Magnets Studs Magnets Studs Magnets Studs Velcro Velcro Magnets Studs Studs Magnets Velcro Studs www.specialisedforce.com.au H All items are certified class II to AS4202, rated 650VAC insulation voltage. H22 DB SERIES INSULATED HARD LINE COVERS (TIGER TAILS) balmoral engineering These line covers (commonly known as tiger tails) are certified to AS4202 and are used for temporary insulation for low voltage live working or additionally on building and construction sites to warn trucks and cranes of overhead power lines. Weather resistant, highly durable and OH&S compliant. Model No. Box Qty Description Length (m) Size ID (mm) Material Class Insulation Voltage (VAC) DB35A DB45A LS70 DB35ARB125 DB35ARB 20 20 10 20 20 Tiger Tails Tiger Tails Tiger Tails Tiger Tails Tiger Tails 2.50 2.50 2.00 1.25 2.50 35 45 70 35 35 HDPE HDPE HDPE HDPE HDPE I I I I I 650 650 650 650 650 LOW VOLTAGE BLANKETS, COVERS & DRAPES An extensive range of high quality PVC and EDPM compounds utilised by utilities and electrical contractors to provide a temporary electrical insulation barrier during maintenance of pits, substations, switchboards, streetlights, pillars, busbars, transformers and metering. H LINESMAN TOOLING & ASSORTED EQUIPMENT COVERS, DRAPES & BLANKETS – LIVE WORKING www.specialisedforce.com.au All items are certified class II to AS4202, rated 650VAC insulation voltage. H23 Model No. Description Length (m) Width (mm) Material Fastening 8008 9001** 9009** 9016A 9017 9018 10007 10008 10009 10010 10011 10018 10019 11000 12000 LV Substation Drape LV Substation Drape LV Substation Drape LV Busbar Cover LV Busbar Cover LV Busbar Cover LV Substation Drape LV Substation Drape LV Substation Drape LV Substation Drape LV Substation Drape LV Pit Cover LV Pit Cover LV Scaffolding Kit LV Column Insert 850 1200 1200 1000 600 300 300 450 600 900 1800 1500 1200 Multiple 850 1200 1200 100 300 300 225 300 450 600 900 1200 900 Multiple PVC PVC EDPM EDPM EDPM EDPM EDPM EDPM EDPM EDPM EDPM PVC PVC Magnets Eyelets Eyelets Eyelets Eyelets Eyelets Velcro & Pegs Velcro ** Also available in metre lengths RUBBER GOODS CLEANER SPRAY High quality environmentally safe and non-toxic rubber goods cleaner, available in wipe or spray. Model No. RBG-35LR RBG-D72 Description Spray Bottle (0.95L) Tub (72 Wipes) www.specialisedforce.com.au H LINESMAN TOOLING & ASSORTED EQUIPMENT XXX-XXXX H24