Transcript
Surveillance | DVS-310-1
1
DVS-310-1 1-channel H.264 PoE Video Encoder
The Digital Advantage
Remotely manage, view, and record video over your local network or the Internet with D-ViewCam software
Conserve Bandwidth With H.264
The H.264 hardware encoder provides crisp, high-quality video while conserving bandwidth for maximum network performance
Effortless Integration
Easily integrates with your existing CCTV system and surveillance equipment
What this Product Does
The DVS-310-1 1-channel H.264 PoE Video Encoder is a high-performance, single channel video encoder for integrating an existing analog CCTV (closed circuit television) camera into an IP-based video surveillance system.
The Digital Advantage
Remotely manage, view, and record video over your local network or the Internet with D-ViewCam software
Conserve Bandwidth with H.264
The H.264 hardware encoder provides crisp, high-quality video at D1 resolution while conserving bandwidth for maximum network performance
Effortless Integration
Easily integrates with your existing CCTV system and surveillance equipment
High Quality Video and Audio
• M-JPEG, MPEG4, and H.264 Simultaneous multi-profile • 30 fps (NTSC) / 25 fps (PAL) • Bidirectional audio • Adjustable video quality Easy Installation • Robust aluminium housing • Setup wizard • UPnP discovery • PoE support
Transform Existing Hardware The DVS-310-1 1-channel H.264 PoE Video Encoder makes it possible to integrate a pre-existing analog CCTV cameras into a fully-functional IP-based surveillance system. The DVS-310-1 is an ideal choice for banks, airports, factories, government buildings, prisons and traffic surveillance applications - any location where CCTV equipment is already installed and functioning. The addition of Power over Ethernet (PoE) makes installation easy. Simply connect the DVS-310-1 to a PoE switch, to power the video encoder using a single Ethernet cable.
Multiple Video Streams The DVS-310-1 supports simultaneous streaming of H.264, MPEG4, and M-JPEG video to provide both high-quality and bandwidth-efficient compression formats. M-JPEG delivers excellent file integrity, ideal for situations which require high image detail. H.264 produces a small file size, making it useful for extended recording or for use with low bandwidth networks. Additionally, the DVS-310-1 supports multicast H.264, which allows several users to view the stream by subscribing to a multicast IP address on the network.
Manage, Record, and View Video with Ease The hardware encoder supports H.264, MPEG4, and M-JPEG video with frame rates of up to 30 fps at D1 resolution. The included D-Link D-ViewCam management software provides a robust platform for configuring and controlling up to 32 IP cameras and video encoders on a single computer screen from a central location. Motion detection and digital input devices trigger automated e-mail alerts that can instantly inform administrators of unusual activities.
3GPP Mobile Surveillance Support for 3GPP Mobile Surveillance allows you to view a live video feed from your 3GPP compatible Internet-ready mobile device. This extends your monitoring capability, allowing you to check your camera’s video feed while on the go without a computer.
Simplify Surveillance with Advanced Alarms and Events Alarm handling features provide alerts in the event of loss of video or network connection. Motion alarms with configurable detection areas allow for effective surveillance and help to mitigate the need for constant human supervision. A buffer system allows the encoder to capture images to the built-in SD card slot both before and after an event occurs.
television) into an IP-based video surveillance system. Surveillance | DVS-310-1
2
HIGH QUALITY VIDEO AND AUDIO M-JPEG, MPEG4, and H.264 Simultaneous multi-profile 30 fps (NTSC) / 25 fps (PAL) Bidirectional audio Adjustable video quality
EASY INSTALLATION Robust aluminum housing Setup wizard UPnP discovery
• SD card storage for event recording SD card storage for event recording • Instant local video recording Instant local video • Intuitive web-based GUIrecording Intuitive web-based GUI capture • Pre/post buffer for image/video • D-Link DDNS support Pre/post buffer for image/video capture
D-Link DDNS support Advanced Alarm Handling
• Video loss and network loss detection ALARM HANDLING • BADVANCED uilt-in motion alarm with configurable detection areasand network loss detection Video loss • FTP and e-mail event handler Built-in motion alarm with configurable
detection areas FTP and e-mail event handler
YOUR NETWORK SETUP
AUDIO IN/OUT
DI/DO PO VIDEO IN (Connects to Camera)
SD CARD SLOT LAN PORT [Connects to Network)
Power Lan Port Socket (Connect to Network)
Powerful Video Management POWERFUL VIDEO MANAGEMENT
Your Network Setup
POWER SOCKET
SD Card Slot
TECHNICAL SPECIFICATIONS
Audio Vedio In Di/Do Reset Power In/Out (Connect to Ports Button LED Camera) SUPPORTED
MINIMUM SYSTEM REQUIREMENTS CPU: Pentium 4, 2.4 GHz and above Hard Disk: 40 GB or higher Memory: 512 MB or higher Operating System: Windows Vista / Windows XP with SP2 or higher / Windows 2000 with SP4 or higher Video Resolution: 1024x768 (SVGA/XGA Software: DirectX 9.0c or higher Removable Storage Browser: Microsoft IE 6.0 or higher
VIDEO ALGORITHMS Simultaneous multi-profile support (MJPEG, MPEG4, H.264) Simultaneous multi-profile support for web viewing, 3G mobile viewing, and video recording JPEG compression for still images
SUPPORTED RESOLUTIONS Technical Specification
NTSC: D1 (720x480), CIF (352x240), QCIF (176x120) PAL: D1 (720x576), CIF (352x288), Video Algorithms Supported QCIF (176x144)
• Simultaneous multi-profile support (H.264, INPUT MJPEG, MPEG4) 1CH, NTSC/PAL, BNC connector • Simultaneous multi-profile support for web 1.0Vp-p 75 Ω loading viewing, 3G mobilewith viewing, and video recordingAUDIO SPECIFICATIONS • JPEG compression for still images Two-way audio External audio in
Supported Resolutions External audio out
• PAL: D1 (720x576), CIF (352x288), QCIF G.726 Codec (176x144) SPECIFICATIONS • NTSC: D1NETWORKING (720x480), CIF (352x240), QCIF Ethernet: RJ45 - 10/100 Base-TX (176x120)
• SD Card Slot
Minimum System Requirements for (D-ViewCam DCS-100) DIMENSIONS (L x W x H)
105 x and 78 x 36 mm (4.1 x 3.1 x 1.4 inches) • CPU: Pentium 4, 2.4 GHz above • Hard Disk: 40 GB or higher OPERATING TEMPERATURE • Memory: 512 MB or higher 0° to 40° C (32° to 104° F) • Operating System: Windows 7 /Windows HUMIDITY Vista / Windows XPOPERATING with SP2 or higher / 20% non-condensing Windows 2000 with SP4toor80% higher • Video Resolution: 1024x768 (SVGA/XGA) CERTIFICATION • Software: DirectX 9.0c or higher CE (Class A) • Browser: MicrosoftIEC-Tick 6.0 or higher (Class A)
802.3af PoE Supported Protocols: IPv4, DHCP, ARP, DNS, TCP/IP, DDNS Input (D-Link), HTTP, HTTPS, UPnP™ Port, Forwarding, Samba, SMTP, Power • 1CH, NTSC/PAL, connector PPPoE,BNC NTP (D-Link), FTP, RTP, RTSP, UDP, RTCP, ICMP,Supply 3GPP
• 1.0Vp-p with 75 Ω loading
PTZ SPECIFICATIONS Baud rates: 2400, 4800, 9600, 19200 Audio Specifications Connector: RS-485 for PTZ control
POWER OUTPUT 100 - 240 VAC, 50/60 Hz, 12 VDC, 1.25 A
FCC (Class A)
• 100 - 240 VAC, 50/60 Hz, 12 VDC, 1.25 A
Dimensions (L x W x H)
• Two-way audio • External REMOVABLE audio in STORAGE SD Card • External audio outSlot • G.726 Codec
• 105 x 78 x 36 mm (4.1 x 3.1 x 1.4 inches)
Networking Specifications
Operating Humidity
• Ethernet: RJ45 - 10/100 Base-TX • 802.3af PoE • Supported Protocols: IPv4, DHCP, ARP, DNS, TCP/IP, DDNS (D-Link), HTTP, HTTPS, UPnP™ Port Forwarding, Samba, SMTP, PPPoE, NTP (D-Link), FTP, RTP, RTSP, UDP, RTCP, ICMP, 3GPP
• 20% to 80% non-condensing
Ptz Specifications • Baud rates: 2400, 4800, 9600, 19200 • Connector: RS-485 for PTZ control
Operating Temperature • 0° to 40° C (32° to 104° F)
Certification • CE (Class A) • C-Tick (Class A) • FCC (Class A)
No. 289 Xinhu Specifications a D-Link is a registered trademark of D-Link Corpo All other trademark ©2010 D-
1-CH H.264 PoE VIDEO
D-Link Corporation No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2010 D-Link Corporation. All rights reserved. Release 01 (June 2010)
D
