Transcript
VisionTek 120GB 7mm SSD SATAIII with USB Universal Transfer/Cloning Kit Bundle
The easy and complete PC or Mac upgrade solution. VisionTek Part#: 900623-kit Ingram SKU: YE1778
Upgrading to the super fast, highly reliable performance of a Solid State Drive is an easy, DIY process with the VisionTek 120GB 7mm SSD SATAIII with USB Universal Transfer/Cloning Kit Bundle. This powerful, yet easy-to-use solution comes with everything you need to transfer your data from your existing hard drive to a new SSD: 120GB 7mm Solid State Drive, easy-to-use software, USB 3.0/2.0 to SATA 3Gb/s connection cable, and 2.5” to 3.5” drive adapter bracket. It also includes 2.5mm spacer for better fit in 9.5mm drive spaces.
Solid State Drive
120GB Go Drive Low Profile 7mm SSD Features
• Sequential Read & Write Transfer: Up to 550MB/s Read, 500MB/s Write • SandForce SF-2281 Controller paired with qualified MLC NAND • SATA 6Gb/s, 3Gb/s and 1.5Gb/s compatibile • DuraClass, DuraWrite, SMART Attributes, Thermal monitoring • O/S Support: Windows® XP, Vista, 7, & 8; Mac® OS; Linux
120GB 7mm Go Drive Specs
VisionTek USB Universal Installation Kit Features
• Creates an exact bootable clone of your internal drive • Dynamic resizing lets you clone to/from any drive with enough available space • Includes 2.5” to 3.5” drive adapter and USB 3.0/2.0 to SATA 3Gb/s cable for cloning
USB Universal SSD Installation Kit Specs & Requirements • Interface: USB 3.0/2.0 to SATA 3Gb/s 22-pin Serial ATA • Data Transfer Speed: Up to 600MB/s
PC Requirements • CD-ROM Drive, 128MB RAM, Pentium® CPU II, available USB 3.0/2.0/1.1 port • Supported Operating Systems: Microsoft Windows® XP, Vista™, 7, and 8
• Sustained Peak Data Rates: Up to 550MB/s (read) / 520MB/s (write) • 4KB Random Write: Up to 85K IOPS • Controller: LSI® SandForce® 2281 Series with 7% Over Provisioning • Capacity: 120GB (128GB total flash memory with 8GB dedicated to real-time redundancy and error correction)* • NAND Flash Memory Type: Tier 1 asynchronous MLC • Form Factor: 2.5” 7.0mm height • Interface: SATA 3.0 compliant to support SATA 6Gb/s, 3Gb/s and 1.5Gb/s applications • Features: Native Command Queuing (NCQ), TRIM support, DuraClass technology, DuraWrite technology, RAISE technology, Advanced Read Disturb Management, thermal threshold management, Intelligent Block Management and Wear Leveling, Intelligent Data Retention optimization, 55bit BCH ECC • Native Command Queuing (NCQ): Up to 32 commands • ECC Recovery: Up to 55 bits correctable per 512-byte sector (BCH) • Data Encryption: 128-bit AES-compliant • Nonrecoverable Read Errors: Less than 1 sector per 1016 bits read • Trim Support: OS Dependent • Interfaces: 1 x Serial ATA-600 - 7 pin Serial ATA • Dimensions: .27” D x 2.6” W x 3.9” H • Certifications: CE/FCC/RoHS • Warranty: Three years
Mac Requirements** • CD-ROM Drive, Apple® G3 or later, 64MB RAM, available USB 3.0/2.0/1.1 port • Supported Operating Systems: Mac® OS 9.2 or later & Mac OS X 10.2 or later The Universal SSD Installation Kit is a non-returnable item. If you have an issue with your VisionTek Universal SSD Installation Kit, VisionTek will replace the item only. *Capacity stated is unformatted. The total formatted capacity for the drive will vary depending on the operating system and file system used. **Special Macintosh User Note: To use the data transfer software to clone data on your Mac, you can either download a free utility, ShirtPocket SuperDuper (http://www.shirt-pocket.com/ SuperDuper/SuperDuperDescription.html) or utilize Disk Utility.
QUESTIONS? CALL YOUR
VISIONTEK SALES REP: Cory Vessells • 949 419 7948 •
[email protected]
