Transcript
MIL-DTL-38999 Connectors
MIL-DTL-38999 Fiber Optic Connection System PRODUCT FEATURES
Stainless Steel Body
Precision Ceramic Alignment Sleeves
Optional Stainless Steel Alignment Sleeves
Precision Ceramic Ferrule
Stainless Steel Protective Thread-On Cover
Size 16 Cavities Accept Both M29504 Fiber Optic Contacts and M39029 Electrical Contacts
Concentric and Diametric Tolerances Controlled within One Micron (.00004 of an Inch)
Same Day Availability
The Glenair Family of Qualified MIL-PRF-29504 Fiber Optic Termini and Composite MIL-DTL-38999 Type Connectors Provide Precise Optical Performance Better Ferrule Design Translates to Better Optical Performance Glenair’s unique alignment techniques maximize optical performance and provide reliable, repeatable interconnection of optical fibers. Ferrule design, critical to the performance of the termini, has traditionally relied on a machined stainless steel ferrule incorporating a precision micro drilled hole. Glenair’s unique precision ceramic ferrules, with concentricity and diametric tolerances controlled within a micron (.00004 of an inch) meet the needs of high bandwidth and low allowable insertion loss applications. In fact, Glenair’s ferrules are approximately 10 times more accurate than alternative designs, and have reduced insertion loss values from 1.5dB to less than .5dB (typical loss for Glenair termini is .3 dB).
Connector System Accomodates Both Fiber Optic and Electrical Contacts Glenair's MIL-PRF-29504/4 and /5 Qualified Fiber Optic Termini are specifically designed for use in the D38999 Series III connector, and provide optimal performance when compared to other fiber optic termini. And because Glenair’s precision manufactured D38999 style connectors exactly conform to the MIL-DTL-38999 specification, they can accept standard size MIL-C-39029 size 16 electrical contacts as well. NOTE: M39029/58-364 size 16 electrical pin contacts and M39029/56-352 size 16 electrical socket contacts may also be used in hybrid configurations with the M29504 fiber optic contact. So, for advanced, tactical optical, electrical or hybrid optical/electrical applications, Glenair’s MILDTL-38999 style connectors provide maximum flexibility and performance.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
181-001 Size 16 Fiber Optic Socket Terminus MIL-PRF-29504/5
181-001-126 K Product Series Basic Number Dash Number (Table I) K = Stainless Steel Alignment Sleeve (Omit for Ceramic Alignment Sleeve)
.346 (8.8)
.246 (6.7) o .082 (2.1)
o .113 (2.9)
PROTECTIVE COVER ALIGNMENT SLEEVE (Included with Terminus) Protective Cover Alignment Sleeve A Dia
.110 (2.8) .092 (2.3)
1.132 (28.8) 1.025 (26.0) .537 (13.6)
o .130 Max
.069 (1.8) Dia
.062 (1.6) Dia .116 (3.0) .114 (2.9) Dia
Shrink Tube
.500 (12.7) .080 (2.0) Max Dia. Cable
Bottoming Surface
See Note 5
APPLICATION NOTES 1. Assembly packaged in plactic bag and tag identified with manufacturer’s name and part number. 2. Material/ Finish: Ferrule, Alignment Sleeve: Zirconia Ceramic/N.A. or Stainless Steel/Passivate. Terminus Assembly: Stainless Steel/Passivate Spacer, Spring, and cover: Stainless Steel/Passivate Shrink Tube: Kynar/N.A 3. Alignment Sleeve & Protective Cover can also be ordered separately (Table II). 4. Metric dimensions (mm) are indicated in parentheses.
5. Threaded protective cover must be retained using Thread locker “Loctite 222” prior to insertion and fully seated against Terminus body as shown. See Assembly Procedure on page B-8 for complete termination instruction. 6. See 182-001S for Socket Terminus Polishing Tool. 7. Recommended insertion/removal tool: P/N: M81969/14-03 or equivalent 8. Consult factory for qualification status.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
181-001 Size 16 Fiber Optic Socket Terminus MIL-PRF-29504/5
TABLE I: FIBER SIZE Assembly Dash Number
Fiber Size Core/Cladding**
A Dia. (Microns)
Reference Only M29504/5-XXXX
181-001-125
9/125 (Singlemode)
125.5
M29504/5-4237*
181-001-126S
9/125 (Singlemode)
126
M29504/5-4238*
181-001-126
50/125 & 62.5/125
126
M29504/5-4239*
181-001-127
50/125 & 62.5/125
127
M29504/5-4046
181-001-142
100/140
142
M29504/5-4049
181-001-144
100/140
144
M29504/5-4050
181-001-145
100/140
145
181-001-156
62.5/125/155 (Polyimide)
156
M29504/5-4240*
181-001-157
62.5/125/155 (Polyimide)
157
M29504/5-4241*
181-001-173
100/140/172 (Polyimide)
173
M29504/5-4088
181-001-175
100/140/172 (Polyimide)
175
M29504/5-4242*
181-001-231
200/230
231
N/A
181-001-236
200/233
236
M29504/5-4243*
181-001-286
200/280
286
M29504/5-4244*
181-001-448
400/440
448
M29504/5-4245*
181-001-533
486/500
533
N/A
N/A
* See Note 8 ** Consult factory for termini which accomodate 600 micron and 1000 micron plastic or glass fiber.
TABLE II: TERMINUS ACCESSORIES Assembly Dash Number
Terminus Accessories
181-001-S
Ceramic Alignment Sleeve
181-001-K
Stainless Steel Alignment Sleeve
181-001-C
Protective cover
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
181-002 Size 16 Fiber Optic Pin Terminus MIL-PRF-29504/4
181-002-126 Product Series Basic Number Dash Number (Table I)
.783 (19.9) .299 (7.6) / .295 (7.5) .062 (1.6) Dia
.270 (6.9) / .262 (6.7) A Dia
.033 (0.8) / .029 (0.7)
o .130 Max
Shrink Tube
.069 (1.8) Dia
.500 (12.7)
.080 (2.0) Max Dia Cable
APPLICATION NOTES 1. Assembly packaged in plactic bag and tag identified with manufacturer’s name and part number. 2. Material/ Finish: Ferrule, Alignment Sleeve: Zirconia Ceramic/N.A. or Stainless Steel/Passivate. Terminus Assembly: Stainless Steel/Passivate Shrink Tube: Kynar/N.A 3. See 182-001P for Pin terminus Polishing Tool.
4. Metric dimensions (mm) are indicated in parentheses. 5. Recommended insertion/removal tool: P/N: M81969/14-03 or equivalent 6. Consult factory for qualification status. 7. See Glenair Assembly Procedure on page B-8 for complete termination instructions.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
181-002 Size 16 Fiber Optic Pin Terminus MIL-PRF-29504/4
TABLE I: FIBER SIZE Assembly Dash Number
Fiber Size Core/Cladding**
A Dia. (Microns)
Reference Only M29504/4-XXXX
181-002-125
9/125 (Singlemode)
125.5
M29504/4-4208*
181-002-126S
9/125 (Singlemode)
126
M29504/4-4209*
181-002-126
50/125 & 62.5/125
126
M29504/4-4210*
181-002-127
50/125 & 62.5/125
127
M29504/4-4040
181-002-142
100/140
142
M29504/4-4043
181-002-144
100/140
144
M29504/4-4044
181-002-145
100/140
145
181-002-156
62.5/125/155 (Polyimide)
156
M29504/4-4211*
181-002-157
62.5/125/155 (Polyimide)
157
M29504/4-4212*
181-002-173
100/140/172 (Polyimide)
173
M29504/4-4087
181-002-175
100/140/172 (Polyimide)
175
M29504/4-4213*
N/A
181-002-231
200/230
231
N/A
181-002-236
200/233
236
M29504/4-4214*
181-002-286
200/280
286
M29504/4-4215*
181-002-448
400/440
448
M29504/4-4216*
181-002-533
486/500
533
N/A
* See Note 6 ** Consult factory for termini which accomodate 600 micron and 1000 micron plastic or glass fiber.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
181-048 Size 16 Fiber Optic Dummy Pin Terminus MIL-PRF-29504/4 & 5 Style
181-048-16 Product Series Basic Number Terminus Size
The Glenair Dummy Pin Terminus is designed to seal against the rear grommet and interfacial seal of D38999 style connectors.
1.370 (34.8) Dia. .062 (1.6)
.015 (0.4) x 45°
Dia. .130 (3.3)
Dia. .103 (2.6)
Dia. .070 (1.8)
APPLICATION NOTES 1. Assembly packaged in plactic bag and tag identified with manufacturer’s name and part number, space permitting. 2. Material/ Finish: Terminus: High Grade Engineering Thermoplastic 3. Recommended insertion/removal tool: P/N: M81969/14-03 or equivalent 4. Metric dimensions (mm) are indicated in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
MIL-PRF-29504 /4 & /5 Qualified Fiber Optic Termini Performance Data
TERMINI SPECIFICATIONS Operating Temperature Range
-65°C to +200°C
Thermal Cycling
-65°C to +150°C
Thermal Shock
-65°C to +150°C, 5 Cycles
Temperature Life
+150°C for 1,000 Hours
Random Vibration
20 - 2,000Hz, 42.2 g’s
Shock (Half Sine)
Pulse 40g Peak Load
Mechanical Shock
MIL-S-901D, Grade A, type B, Class I
Mating Durability
500 Cycles, Cleaning after 100 Matings
Salt Spray
40 Hours (Terminus Only)
Cable Retention Force
25 Lbs. Depending on Cable Construction
Signal discontinuities measured at 4 microseconds maximum with 0.5dB maximum change in optical transmittance during and after these tests. Test reports and MIL-PRF-29504 qualification documentation available upon request.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
181-001 and -002 Termini Abbreviated Termination Procedure
1. Glenair Recommended Fiber Strip Dimensions: .950 + .03
1.200 + .03 .700 + .03 .230 + .15
Outer Jacket
Strength Member
.300 + .03 .230 + .03
Outer Jacket
Buffer
Bare Fiber
Strength Member
Buffer
Bare Fiber
Pin Terminus, P/N 181-002-***
Socket Terminus, P/N 181-001-***
Figure 1
2. Glenair Recommended Adhesives:
• Tra-Bond, Tra-Con BAF 113SC (Heat Cure 1 Hr. @ 65°C or 24 Hr. Air Cure). For applications -55° to +150°C.
• EPO-TEC 353ND (Ramped Heat Cure: 30 Min. @ 80°C, 30 Min. @ 100°C, 10 Min. @ 150°C). For applications -65°C to +150°C.
3. Termination Steps:
A. Install Terminus Shrink Sleeve
B. Measure and Strip Fiber to Appropriate Length per Figure 1.
C. Fill Syringe with Adhesive (No Air Bubble Should be Present).
D. Completely Fill Terminus with Epoxy.
E. Evenly Distribute Strength Member Over Rear of Terminus.
F. Slide Sleeve to Base of Terminus and Heat Shrink using Heat Gun (Do Not Overheat the Fiber).
G. Clean Terminus Body Using Isopropyl Alcohol.
H. Add a Small Bead of Epoxy to the Tip of the Terminus (See Figure 2). .170
Strength Member
Small Bead of Epoxy
Outer Jacket
.170
Strength Member
Outer Jacket
Small Bead of Epoxy
Shrink Tubing
Shrink Tubing Pin Terminus, P/N 181-002-***
Socket Terminus, P/N 181-001-***
Figure 2
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-DTL-38999 Connectors
181-001 and -002 Termini Abbreviated Termination Procedure
4. Cure Termination using Curing Oven. 5. Cleave Excess Fiber using Fiber Scribe. 6. Polishing Procedure:
• STEP 1: Use 9 Micron Diamond Film to Remove adhesive.
• STEP 2: Use 3 Micron Diamond Film to Polish.
• STEP 3: Use 1 Micron Diamond Film for Final Polish. • STEP 4 (Singlemode Only): Polish using 65-70 Shore Rubber Pad and with .1 or .3 Micron Diamond Film.
7. Visually Inspect Fiber Termination at 200X Magnification. Core Area Must be Free of Epoxy, Scratches, Pits, and Cracks. Core
Acceptable
Unacceptable Small Scratches
Cladding
Figure 3 8. Socket Terminus Alignment Sleeve and Protective Cover Installation:
• Install Ceramic Sleeve. • Apply "Loctite 222" on 3 Full Threads of the Terminus • Screw Protective Cap onto Terminus Until Fully Seated. Protective Cover
Outer Jacket
Strength Member
Socket Terminus, P/N 181-001-*** Alignment Sleeve
Shrink Tubing
Bottoming Shoulder
Loctite 222
Figure 4
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-PRF-28876 Connectors
181-040 M29504/15 Style Front Release Socket Terminus Size 16
181-040-1260 C N N = Alignment Sleeve Assembly Not required (Omit to receive Alignment Sleeve)
Product Series Basic Number
Crimp Sleeve Designator Omit if None (See Table II)
Dash Number (Table I)
.955 (24.3) Max .800 (20.3) Max
Retaining Clip
.277 (7.0) .267 (6.8) (See Note 6)
Terminus Assembly .118 (3.0) .114 (2.9) Dia
Alignment Sleeve
.158 (4.0) Max .158 (4.0) Min
A Dia Ferrule Hole .118 (3.0) .115 (2.9) Dia
.080 (2.0) .074 (1.9) Dia
Crimp Sleeve (See Note 3)
TABLE I: DASH NUMBER A Dia (Microns)
1250
126.0 125.0
Designator
1255
126.5 125.5
C
1260
127.0 126.0
1270
128.0 127.0
1420
143.0 142.0
TABLE III: TERMINUS ACCESSORIES
TABLE II: CRIMP SLEEVE DESIGNATOR
Assembly Dash Number
Protective Cover
Ferrule
Environmental Seal
Cable Diameter
Part Number
2.0-2.4 mm (MIL-Spec)
265-008
Part Number
Accessory
265-010
Alignment Sleeve Assembly
182-012
Crimp Tool
182-013
Insertion Tool, Straight
182-014
Insertion Tool, 90°
182-015
Removal Tool
182-016
Alignment Sleeve Assembly Insertion/Removal Tool
182-017
Hand Polishing Tool
Consult Factory for Additional Sizes
APPLICATION NOTES 1. 2.
Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number Material/ Finish: Alignment Sleeve, Ferrule: Zirconia Ceramic/ N.A. Protective cover: Spring Alloy / Nickel Terminus Assembly: Stainless Steel / Passivate Retaining Clip: Spring Alloy / N.A. Seal: Fluorosilicone
4.
Crimp Sleeve: Brass Alloy / Nickel Alignment Sleeve Assembly and Crimp Sleeve may be ordered separately (Tables II and III) Metric dimensions (mm) are in parentheses.
5.
Dummy Terminus: Part Number 181-051
6.
Dimension to be measured when installed into insert equivalent fixture per MIL-PRF-29504/15
3.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-PRF-28876 Connectors
181-039 M29504/14 Style Front Release Pin Terminus Size 16
181-039-1260 C C = Crimp Sleeve Designator Omit if None (See Table II)
Product Series Basic Number Dash Number (Table I)
.900 (22.9) Max Retaining Clip Terminus Assembly .118 (3.0) .114 (2.9) Dia
.0788 .0787 Dia
Ferrule Environmental Seal
A Dia (Microns)
1250
126.0 125.0
Designator
1255
126.5 125.5
C
1260
127.0 126.0
1420
Spring Washers
TABLE II: CRIMP SLEEVE DESIGNATOR
TABLE I: DASH NUMBER
1270
A Dia Ferrule Hole
.080 (2.0) .074 (1.9) Dia
Crimp Sleeve (See Note 5)
Assembly Dash Number
.384 (9.8) .372 (9.4) (See Note 6) .158 (4.0) .102 (2.6) Min Max Dia
TABLE III: TERMINUS ACCESSORIES
Cable Diameter
Part Number
2.0-2.4 mm (MIL-Spec)
265-008
128.0 127.0 143.0 142.0
Part Number
Accessory
182-012
Crimp Tool
182-013
Insertion Tool, Straight
182-014
Insertion Tool, 90°
182-015
Removal Tool
182-017
Hand Polishing Tool
Consult Factory for Additional Sizes
APPLICATION NOTES 1. 2.
Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number. Material/ Finish: Ferrule: Zirconia Ceramic/ N.A. Terminus Assembly: Stainless Steel/ Passivate Retaining Clip, Spring Washers: Spring Alloy / N.A. Seal: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel
3. 4. 5. 6.
Crimp Sleeve may be ordered separately (Table II). Metric dimensions (mm) are in parentheses Dummy Terminus: Part Number 181-051 Dimension to be measured when installed into insert equivalent fixture per MIL-PRF-29504/14
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
MIL-PRF-28876 Connectors
181-051 M29504/03 Style Dummy Terminus Size 16
.557 (14.2) .537 (13.6) Terminus Body
.070/.050 (1.8/1.3) See Note 4
Retaining Clip
.102 (2.6) Dia
.118 (.299) .114 (.289) Dia
Environmental Seal
APPLICATION NOTES 1. Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number and date code. 2. Material/ Finish: Terminus Body: Stainless Steel/Passivate Retaining Clip: Spring Alloy/Nickel Seal: Fluorosilicone 3. Dummy terminus is designed to meet the general requirements of MIL-PRF-29504/03. 4. Dimension to be measured when installed into insert equivalent fixture per MIL-PRF-29504/03.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
TABLE III: TERMINUS ACCESSORIES Part Number
Accessory
182-013
Insertion Tool, Straight
182-014
Insertion Tool, 90°
182-015
Removal Tool
www.btcelectronics.com
Next Generation (NGCON)
181-043 Rear Release Genderless Terminus for Next Generation (NGCON) Fiber Optic Connectors
181-043-126 M Product Series Basic Number Dash Number (Table I)
E P Y T S T E T O A N L T R G O O I F N R S Y O P DECTORRATI M - Multimode S - Singlemode
1.167 (29.6) Max
Clip
.091 (2.3) Max Dia.
1.25 mm Dia. A Dia.
.228 (5.8) Max
O-Ring
Spring, Flat
.269 (6.8)
2.
3. 4. 5 6.
Crimp Sleeve (See Note 5)
.078 (2.0) Max Dia. Washer, Retaining
A GU F I T F L N U O C NS APPLICATION NOTES
1.
.122 (3.1) Max Dia.
TABLE I: DASH NUMBER
Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number. Material/Finish: Ferrule: Zirconia Ceramic/N.A. Terminus Assembly: Stainless Steel/Passivate Retaining Clip: Spring Alloy/N.A. Spring: High Tensile Stainless Steel/Passivate O-Ring: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel. Recommended Removal Tool: NAVSEA DWG TBD. See 182-XXXP for Pin Terminus Polishing Tool. Crimp Sleeve may be ordered separately (Table II). Metric dimensions (mm) are indicated in parentheses.
CO
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
ASSEMBLY DASH NUMBER
A DIA.
181-043-125
125
181-043-1255
125.5
181-043-126
126
181-043-127
127
181-043-142
142
181-043-145
145
181-043-156
156
181-043-157
157
181-043-173
173
181-043-175
175
181-043-236
236
181-043-285
285
181-043-448
448
www.btcelectronics.com
GFOCA Connectors
181-050 M29504/16 Style GFOCA Genderless Terminus for Use with M83526/16/17 Style Hermaphroditic Connectors
181-050-1260 C Product Series
TABLE I: DASH NUMBER
Basic Number
Assembly Dash No.
Dash Number (Table I)
181-050-1250
.1260
.1250
SM
181-050-1255
.1265
.1255
SM
181-050-1260
.1270
.1260
SM & MM
181-050-1270
.1280
.1270
MM
181-050-1420
.1430
.1420
MM
181-050-2300
.2340
.2300
MM
Add “C” to include Crimp Sleeve (Omit for None)
A Dia (mm) Max Min
Fiber Type (Typical)
SM = Singlemode MM = Multimode 1.275 (32.4) Max 1.043 (26.49)Max 1.034 (26.3) Min
A Dia
.253 (6.4) Max .246 (6.2) Min
Sealing Feature
2.5 mm Dia
Retaining Ring
Ferrule
Sleeve Ferrule Housing
Spring
APPLICATION NOTES 1. Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number. 2. Material/ Finish: Ferrule: Zirconia Ceramic/ N.A. Terminus Assembly: Stainless Steel/ Passivate Spring: High Tensile Stainless Steel/ Passivate Sliding Sleeve: Stainless Steel/ Passivate Retaining Ring: Stainless Steel/ Passivate
3. Insertion/Removal Tool: Consult factory 4. Consult factory for assembly and termination tools. 5. For Glenair GFOCA connector product, refer to Glenair 180-116 and 180-117 drawings (Pages F-4 and F-6). 6. Metric dimensions (mm) are indicated in parentheses. 7. Crimp sleeve: See 265-008.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
181-011 Fiber Optic Socket Terminus Size 16 Front Release with Protective Cover Alignment Sleeve
181-011-126 Product Series Basic Number Dash Number (Table I)
.85 (21.6) .71 (18.0) A Dia
O-ring
.16 (4.1)
.115 (3.0) Dia
Protective Cover With Alignment Sleeve (See Note 3)
.077 (2.0) .116 Dia (3.0) Dia Spring Clip Crimp Sleeve P/n 265-002 (See Note 3)
APPLICATION NOTES 1. 2.
Assembly packaged in plastic bag and tag identified with manufacturer's name and part number. Material/Finish: Ferrule: Zirconia Ceramic/N.A. Protective Cover: Spring Alloy Terminus Assembly: Stainless Steel/Passivate Spring Material: Stainless Steel Passivate Spring Clip: Spring Alloy O-Ring: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel
3. 4. 5.
Alignment Sleeve with Protective Cover and Crimp Sleeve may be ordered separately (Table II). Consult factory for termination and assembly tools/procedures. Metric dimensions (mm) are in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
181-011 Fiber Optic Socket Terminus Size 16 Front Release with Protective Cover Alignment Sleeve
TABLE I: DASH NUMBER Assembly Dash No.
Fiber Size Core/Cladding
A Dia (mm)
125
9/125 (Singlemode)
.125
126
50/125
.126
126
62.5/125
.126
142
100/140
.142
156
62.5/125/155 (Polyimide)
.156
175
100/140/172 (Polyimide)
.175
233
200/225
.233
236
200/230
.236
280
200/280
.286
440
400/440
.448
TABLE II: TERMINUS ACCESSORIES Assembly Dash No.
Terminus Accessories
181-011-S
Protective Cover with Ceramic Alignment Sleeve
181-011-K
Protective Cover with Stainless Steel Alignment Sleeve
182-005S
Socket Terminus Polishing Tool
265-002
Crimp Sleeve
182-015
Removal Tool
182-016
Alignment Sleeve Insertion/ Removal Tool
182-014
Insertion Tool, 90°
182-013
Insertion Tool, Straight
182-012
Crimp Tool
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
181-012 Fiber Optic Pin Terminus Size 16 Front Release
181-012-126 Product Series Basic Number Dash Number (Table I)
.94 (23.9) .54 (13.7)
O-Ring
.16 (4.1)
A Dia
.077 (2.0) Dia
Ferrule
Spring
.116 (3.0) Dia
Spring Clip Crimp Sleeve P/n 265-002 (See Note 5)
APPLICATION NOTES 1. 2.
Assembly packaged in plastic bag and tag identified with manufacturer's name and part number. Material/Finish: Ferrule: Zirconia Ceramic/N.A. Protective Cover: Spring Alloy/Nickel Terminus Assembly: Stainless Steel/Passivate Spring Material: Stainless Steel Passivate Spring Clip: Spring Alloy/N.A. O-Ring: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel
3. 4. 5.
Alignment Sleeve with Protective Cover and Crimp Sleeve may be ordered separately (Table II). Consult factory for termination and assembly tools/procedures. Metric dimensions (mm) are in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
181-012 Fiber Optic Pin Terminus Size 16 Front Release
TABLE I: DASH NUMBER Assembly Dash No.
Fiber Size Core/Cladding
A Dia (mm)
125
9/125 (Singlemode)
.125
126
50/125
.126
126
62.5/125
.126
142
100/140
.142
156
62.5/125/155 (Polyimide)
.156
175
100/140/172 (Polyimide)
.175
233
200/225
.233
236
200/230
.236
280
200/280
.286
440
400/440
.448
TABLE II: TERMINUS ACCESSORIES Assembly Dash No.
Terminus Accessories
265-002
Crimp Sleeve
182-015
Removal Tool
182-005P
Pin terminus Polishing Tool
182-014
Insertion Tool, 90°
182-013
Insertion Tool, Straight
182-012
Crimp Tool
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
187-017 Glenair Fiber Optic Termination Kit for MIL-PRF-29504/4 & /5 Termini (181-001 & 002)
Turn-Key Termination of MIL-PRF-29504/04 and /05 Fiber Termini
Singlemode or Multimode
110 Volt or 220 Volt
Complete Kit With All Tools, Instruments and Consumables Power Meter LED Source 200X Microscope Polishing Media Curing Oven Hand Tools Epoxies, Wipes and Swabs
Portable “Fiber Optic Lab In A Box” for Field Termination and Repair of D38999 Optical Interconnects Our termination kit allows field technicians the convenience of on-site optical fiber termination. Each kit contains jacket strippers, polishing tools, hand tools, light source, power meter and microscope as well as a full complement of consumables including epoxy, polishing media, swabs and adhesives.
Key Components
Optical Power Meter Battery-Operated
LED Source Battery-Operated
Curing Oven
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
200X Microscope Battery-Operated
www.btcelectronics.com
Fiber Optic Tool Kits
187-017 Glenair Fiber Optic Termination Kit for MIL-PRF-29504/4 & /5 Termini (181-001 & 002)
187-017 110-MM Product Series Basic Number
PARTS LIST Item No.
Part Description
Quantity
Voltage 110 or 220
1
Terminus Procedure (Laminated)
1
2
Pin Termini for 62.5/125 Fiber (181-002-126)
10
MM = Multimode SM = Singlemode
3
Socket Termini for 62.5/125 Fiber (181-001-126)
10
4
Polishing Tool, Pin Terminus (181-001P)
1
FOR USE WITH MIL-PRF-29504/4 & /5 TERMINI
5
Polishing Tool, Socket Terminus (181-001S)
1
6
Terminus Swabs (Glenair 50/Pkg) (187-024)
1
7
Spare Ceramic Alignment Sleeve (181-001-S)
10
8
Plastic Dust Cover, ST (2.5 mm Dia) (F.I.S.)
10 10
9
Plastic Dust Cover, Termini (.062” Dia) (CAPLUG)
10
Hard Shell Tool Case with Foam (Fibertron)
1
11
Custom Diecut Foam Insert (CHI Case)
1
12
Multi-Cure Oven with Curing Block (9050) (Fibertron)
1
13
D38999 Ferrules Curing Block (Fibertron)
1
14
Microscope, 200X (Noyes)
1
15
Microscope Adapter for D38999 (Noyes)
1
16
Scribe, Fiber (Fibertron)
1
17
Kevlar Shear (Clauss)
1
18
No-Nic Stripper, Gold (Clauss)
1
19
No-Nic Stripper, Blue (Clauss)
1
20
Autocleaner (Netpec)
1
21
Jacket Stripper, T5 (Clauss)
1
22
Alcohol Dispenser, 4 Oz. (F.I.S.)
1
23
Ruler, 6” (Fibertron)
1
24
Diamond Polishing Film, 9 Microm, 6 x 6 (3M)
4
25
Diamond Polishing Film, 3 Micron, 6 x 6 (3M)
6
26
Diamond Polishing Film, 1 Micron, 6 x 6 (3M)
6
27
Resilient Rubber Pad (3M)
1
28
Glass Polishing Plate, 8” x 8” (Fibertron)
1
29
Cleaning Wire (F.I.S.)
1
30
Compressed Air (Fibertron)
1
31
Kim-Wipes (Kimberly-Clark)
1
32
Continuity Test, ST (F.I.S.)
1
33
Epoxy Applicator (Syringe) (Fibertron)
10
34
Mini Foam Swab, 2.5 mm (F.I.S.)
50
35
Tra-Bound Adhesive (Tra-Con)
10
36
Insert/Removal Tool
5
37
LED Source W.D38999 Aptr, 1300nm Wvlngth (Rifocs)
1
38
Power Meter W/D38999 Aptr, 1300nm Wvlngth (Rifocs)
1
39
ST Adapter for Power meter (Rifocs)
1
40
ST Adapter for LED Source (Rifocs)
1
41
Instant Adhesive (Loctite Corp.)
1
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
187-018 Glenair Fiber Optic Termination Kit for Front Release 181-011 & -012 Termini
187-018 110-MM
PARTS LIST Item No.
Part Description
Product Series Quantity
1
181-011 & 181-012 Terminus Priocedure (Laminated)
1
2
Pin Termini for 62.5/125 Fiber (181-012-126)
10
3
Socket Termini for 62.5/125 Fiber (181-011-126)
10
4
Polishing Tool, Pin, Front Release (182-005P)
1
5
Polishing Tool, Socket, Front Release (182-005S)
1
6
Terminus Swabs (Glenair 50/Pkg) (187-045)
1
7
Plastic Dust Cover, ST (2.5 mm Dia) (F.I.S.)
10
8
Plastic Dust Cover, Termini (.062” Dia) (CAPLUG)
10
9
Hard Shell Tool Case with Foam (Fibertron)
1
10
Custom Diecut Foam Insert (CHI Case)
1
11
Multi-Cure Oven with Curing Block (9050) (Fibertron)
1
12
D38999 Ferrules Curing Block (Fibertron)
1
13
Microscope, 200X (Noyes)
1
14
Microscope Adapter for D38999 (Noyes)
1
15
Scribe, Fiber (Fibertron)
1
16
Kevlar Shear (Clauss)
1
17
No-Nic Stripper, Gold (Clauss)
1
18
No-Nic Stripper, Blue (Clauss)
1
19
Autocleaner (Netpec)
1
20
Jacket Stripper, T5 (Clauss)
1
21
Alcohol Dispenser, 4 Oz. (F.I.S.)
1
22
Ruler, 6” (Fibertron)
1
23
Diamond Polishing Film, 9 Microm, 6 x 6 (3M)
4
24
Diamond Polishing Film, 3 Micron, 6 x 6 (3M)
6
25
Diamond Polishing Film, 1 Micron, 6 x 6 (3M)
6
26
Resilient Rubber Pad (3M)
1
27
Glass Polishing Plate, 8” x 8” (Fibertron)
1
28
Cleaning Wire (F.I.S.)
1
29
Compressed Air (Fibertron)
1
30
Kim-Wipes (Kimberly-Clark)
1
31
Continuity Test, ST (F.I.S.)
1
32
Epoxy Applicator (Syringe) (Fibertron)
10
33
Mini Foam Swab, 2.5 mm (F.I.S.)
50
34
Tra-Bound Adhesive (Tra-Con)
10
35
LED Source W/D38999 Aptr, 1300nm Wvlngth (Rifocus)
1
36
Power Meter W/D38999 Aptr, 1300nm Wvlngth (Rifocus)
1
37
ST Adapter for Power meter (Rifocus)
1
38
Crimp Tool for 181-011 & 181-012 Termini (Kitco F.O.)
1
39
ST Adapter for LED Source (Rifocus)
1
40
Terminus Removal Tool, Front Release (Kitco)
1
41
Alignment Sleeve Removal Tool (Kitco)
1
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
Basic Number Voltage 110 or 220 MM = Multimode SM = Singlemode
FOR USE WITH GLENAIR Front Release 181-011 & 012 TERMINI
www.btcelectronics.com
Fiber Optic Tool Kits
182-001 Fiber Optic Polishing Tool for 181-001 and 181-002 Termini
182-001 S W W = Wet Polish Supplied with V-Grooves (Omit for Dry Polish)
Product Series Basic Number Designation Symbol S = Socket Terminus P = Pin terminus
.320 (8.1) Max
P
1.500 (38.1) DIA
S
1.500 (38.1) DIA
.550 (14.0) Max
APPLICATION NOTES 1. Assembly packaged in plastic bag and tag identified with manufacturer's name and part number.
3. Material/Finish: Stainless Steel/Passivated. 4. Metric Dimensions (mm) are indicated in parentheses.
2. Assembly marked with “PIN” or “SKT” and part number.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
182-002 Fiber Optic Polishing Tool for 181-006 Test Probe
182-002 W Product Series Basic Number W = Wet Polish Supplied with V-Grooves (Omit for Dry Polish)
1.500 (38.1) DIA
.940 (23.9) DIA
APPLICATION NOTES 1. Assembly packaged in plastic bag and tag identified with manufacturer's name and part number.
3. Material/Finish: Stainless Steel/Passivated. 4. Metric Dimensions (mm) are indicated in parentheses.
2. Assembly marked with “TEST PROBE” and part number.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
182-005 Fiber Optic Polishing Tool for 181-011 and 181-012 Front Release Termini
182-005 S W W = Wet Polish Supplied with V-Grooves (Omit for Dry Polish)
Product Series Basic Number Designation Symbol S = Socket Terminus P = Pin terminus
.740 (18.8)
1.500 (38.1) DIA
P
.480 (12.2)
1.500 (38.1) DIA
S
APPLICATION NOTES 1. Assembly packaged in plastic bag and tag identified with manufacturer's name and part number.
3. Material/Finish: Stainless Steel/Passivated. 4. Metric Dimensions (mm) are indicated in parentheses.
2. Assembly marked with “PIN” or “SKT” and part number.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
182-006 Fiber Optic Socket Polishing Tool
182-006 S W W = Wet Polish Supplied with V-Grooves (Omit for Dry Polish)
Product Series Basic Number Designation Symbol S = Socket Terminus P = Pin terminus
1.50 (38.1) Max 1.50 (38.1) Max
Light Force Spring
Light Force Spring
1.083 (27.5) Max
P
S
APPLICATION NOTES 1. Termini and springs to be shipped loose. Consult factory for details. 2. Material/ Finish: Stainless Steel/ Passivate. 3. Assembly packaged in plastic bag and tag identified with manufacture’s name and part number. 4. Metric dimensions (mm) are indicated in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
182-007 Fiber Optic Termini Polishing Tool for 181-045 2.5 mm Termini
182-007 W W = Wet Polish Supplied with V-Grooves (Omit for Dry Polish)
Product Series Basic Number
.0002 -A.1775 (4.5) –.005 (0.1)
64 X
.0989 (2.5) .0985 (2.5) .0002 -A-
1.260 (32.0) Dia Min
R.047 (1.2) Min
.162 (4.1) Min See Note 1
APPLICATION NOTES 1 Assembly marked with part number, 06324 and date code. 2. Material/ Finish: Stainless Steel/Pasivated 3. Metric dimensions (mm) are in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
Glenair Fiber Optic Termini Cleaning Procedure
Glenair has developed exactingly dimensioned cleaning swabs for cleaning difficult-to-clean, recessed socket termini. Each swab's foam tip is the perfect size to clean both the alignment sleeve and the glass core area of the fiber. Please follow these instructions when cleaning fiber optic termini:
Glenair Recommends the Following Procedure for Cleaning Glenair Fiber Optic Termini: 1. Remove loose contamination with a dry swab. 2. Blow pressurized, filtered air (or instrument grade canned air) onto terminus end face. 3. Inspect end face using 10X magnification minumum. 4. If contamination is still present, take the following measures: A. Soak swab foam tip with 99%+ pure alcohol. B. Wipe the wet swab across the terminus end face. C. Wipe a dry swab across the terminus end face immediately to guard against potential air-dried alcohol film residue.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
187-021 Fiber Optic Cleaning Swab 1.25 mm Cletop
187-021 Product Series Basic Number
4.00 (101.6) .50 (12.7)
1.25 Mm Cletop
187-021 Is Supplied With 5 Swabs/Bag
APPLICATION NOTES 1. Bag & tag with manufacturer’s name and P/N, space permitting. 2. Metric dimensions (mm) are indicated in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
187-024 Fiber Optic Cleaning Swab for Part 181-001 Socket Terminus
187-024 Product Series Basic Number
6.3 (160.0)
.50 (12.7)
187-024 is Supplied with 50 Swabs/Bag
1.25 mm Foam
APPLICATION NOTES 1. Bag & tag with manufacturer’s name and P/N, space permitting. 2. Metric dimensions (mm) are indicated in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
Fiber Optic Tool Kits
187-045 Fiber Optic Cleaning Swab 2.00 mm and 2.50 mm Cletop
187-045 Product Series Basic Number
6.5 (165.1) (Ref Only) .75 (19.1)
.75 (19.1)
2.00 mm Cletop
187-045 is Supplied with 5 Swabs/Bag
2.50 mm Cletop
APPLICATION NOTES 1. Bag & tag with manufacturer’s name and P/N, space permitting. 2. Metric dimensions (mm) are indicated in parentheses.
Available from BTC Electronic Components, Inc. 1-800-526-2828 or 919-556-8900
www.btcelectronics.com
