Transcript
The IT cabinet SCHÄFER IS-1 As individual as your applications
IT’s bigger InSide 1
IT cabinet SCHÄFER IS-1
SCHÄFER IS-1 System
The new generation of server cabinets from SCHÄFER IT-Systems
Door opening angle stand alone 240°, in bays 180°
IP54 rating
The SCHÄFER IS-1 is the response to constantly increasing demands
IP54 rating
in data, server and network technology, offering, above all, scope for
Clip-on plinth panels
individual solutions.
Optional: transport rings on top cover corners for easier handling
Its innovative slot-in design and single-screw principle makes the
IS-1 easy to assemble, even in enclosed spaces or difficult locations. This makes these new cabinets ideal for smaller server rooms,
and safer transport, EMV version
Dimensions
as well as large data centers.
Heights: 1200, 1800, 2000 und 2200 mm
IS-1 benefits at a glance
Depths: 600, 800, 900, 1000 und 1200 mm
Quick and easy assembly using the 1-screw principle Max. 47 U and large useable internal width 180° door opening angle on bayed cabinets
due to hinges mounted on wall exterior
Side panels can be installed and removed in seconds
Widths: 300*, 600, 700 und 800 mm * 300 mm width for LOOPUS side cooler
Finishes High-grade powder coating in RAL 7035 (light grey) and RAL 9005 (black)
Integrated, all-round 25-mm pitch pattern planes
The cabinets are available as
Optimal cable routing due to adjustable bottom modules
Pre-assembled complete cabinets, an especially economical
and two-piece top cover panel
and quickly available solution
Extremely high strength cabinet due to profiled framework
Individually configured solutions in all standard dimensions,
Frame load bearing capacity of up to 1500 kilos
2
with shortest possible delivery times
Useable internal dimensions between the profile uprights: for 600 mm wide racks, 510 mm for 700 mm wide racks, 610 mm for 800 mm wide racks, 710 mm
External dimensions (without side panels): for 600 mm wide racks, 597 mm for 700 mm wide racks, 697 mm for 800 mm wide racks, 797 mm
Flexible internal components
Universal depth stays for installing components
Hinge with a 180° opening angle on bayed cabinets
Clip-on nuts, M6 or M8, for securing components to the frame
Cross support for mounting angles in 700 and 800 mm wide racks
Professional security
Load bearing capacity of 482.6 mm (19“) planes: 2 depth stays
(per side)
max. 500 kg
3 depth stays
(per side)
max. 700 kg
4 depth stays
(per side)
max. 1000 kg
4 corner brackets
(per side)
max. 700 kg
2 cross supports
(front/rear)
max. 1000 kg
Complete range of accessories: Sensibly arranged and packed ready for assembly Specially for the equipping or extension of SCHÄFER IS-1 racks
Sash fasteners with modular locking components (key, profile half cylinder, push button)
For general accessories for internal installation, power supply, etc.
(see pages 6/7) 3
SCHÄFER IS-1 configurator
IT cabinet SCHÄFER IS-1
Configurator for 800 mm cabinets Configure your own customised cabinet 1
Determine basic frame dimensions (width, height, depth)
2
Select doors, 482.6 mm (19“) mounting angles, side panels and plinth
3
Choose top cover panel
4
Choose bottom cover panel
Completely assembled to your specifications, the cabinet will be delivered in the shortest possible time. 1
IP54 rating
Sheet steel door, single wing, solid
Sheet steel door, double wing, solid
Basic Frame, 800 mm width
Width (mm)
800 800 800 800 800 800 800 800 800 800 800 800
Height (mm)
1200 1200 1200 1800 1800 2000 2000 2000 2000 2200 2200 2200
Depth (mm)
600 800 900 800 900 800 900 1000 1200 800 1000 1200
Internal height (U) Colour, light grey RAL 7035 Colour, black RAL 9005 fine structure Basic framework
2
25 25 25 38 38 43 43 43 43 47 47 47 6007035 6007035 6007035 6007035 6007035 6007035 6007035 6007035 6007035 6007035 6007035 6007035 6009005 6009005 6009005 6009005 6009005 6009005 6009005 6009005 6009005 6009005 6009005 6009005 506812605 506812805 506812905 506818805 506818905 506820805 506820905 506821005 506823005 506822805 506822005 506822205
Doors, 482.6 mm (19“) mounting angles, side panels and plinth
Glass front door, single wing with 3 mm SPSG
506981005 506981005 506981005 506983005 506983005 506984005 506984005 506984005 506934005 506936005 506936005 506936005
Sheet steel door, single wing, solid
506985505 506985505 506985505 506987505 506987505 506988505 506988505 506988505 506988505 506937005 506937005 506937005
Sheet steel door, double wing, solid
506955005 506955005 506955005
506958005 506958005 506958005 506958005 506959005 506959005 506959005
Glass front door, double wing, with 3 mm SPSG
506958505 506958505 506958505 506958505 506956005 506956005 506956005
Glass front door, single wing, with 3 mm SPSG, IP 54
506981006 506981006 506981006
506984006 506984006 506984006 506984006 506936006 506936006 506936006
Sheet steel door, single wing, solid, IP54
506985506 506985506 506985506
506988506 506988506 506988506 506988506 506937506 506937506 506937506
506956505 506956505 506956505 506956505 506958055 506958055 506958055
Sheet steel door, double wing, passive venting (honeycomb perforation, 81 % open area) Sheet steel door, single wing, passive venting (honeycomb perforation, 81 % open area)
482.6 mm (19“) mounting angle, front
506993005 506993005 506993005 506995005 506995005 506994505 506994505 506994505 506994505 506938005 506938005 506938005 506783505 506783505 506783505 506784505 506784505 506785005 506785005 506785005 506785505 506780505 506780505 506780505
482.6 mm (19“) mounting angle, front/rear 506783515 506783515 506783515 506784515 506784515 506785015 506785015 506785015 506785015 506780515 506780515 506780515 38/43 U cross support for 482.6 mm (19“) angles, front
506943005 506943005 506943005 506943005 506943005 506943005
38/43 U cross support for 482.6 mm (19“) angles, front/rear
506943505 506943505 506943505 506943505 506943505 506943505
25/47 U cross support for 482.6 mm (19“) angles, front
506943205 506943205 506943205 506943205 506943205 506943205
25/47 U cross support for 482.6 mm (19“) angles, front/rear
506943215 506943215 506943215 506943215 506943215 506943215
Corner brackets for 482.6 mm (19“) angles, front (4)
506943705 506943705 506943705 506943705 506943705 506943705 506943705 506943705 506943705 506943705 506943705 506943705
Corner brackets for 482.6 mm (19“) angles, front/rear (8)
506943805 506943805 506943805 506943805 506943805 506943805 506943805 506943805 506943805 506943805 506943805 506943805
Depth stays for 482.6 mm (19“) angles, (4) 506941005 506952005 506953005 506952005 506953005 506952005 506953005 506954005 506954505 506952005 506954005 506954005 Side panels, slot-in
506732005 506932005 506736005 506934005 506734005 506935005 506737005 506739005 506740005 506738005 506738105 506741065
Side panels, screw-fastened, IP54
506741006 506932006 506935006 506737006 506739006 506740006 506741006
Plinth, with passive ventilation, levelling feet, height 100 mm
506921005 506922005 506926005 506922005 506926005 506922005 506926005 506922505 506921505 506922005* 506922505* 506921505*
Plinth, solid, with levelling feet, levelling feet, height 100 mm
506923005 506924005 506925005 506924005 506925005 506924005 506925005 506923505 506924505 506924005* 506923505* 506924505*
Plinth, with passive ventilation, levelling feet, height 200 mm
506922205 506926205 506922205 506926205 506922205* 506926205* 506928205* 506921205* 506922205* 506928205* 506921205*
Plinth, solid, levelling feet, height 200 mm
506924205 506925205 506924205 506925205 506924205* 506925205* 506923205* 506927205* 506924205* 506923205* 506927205*
4
* plinth not assembled
Honeycomb perforation
Glass door, single wing, with 3 mm SPSG
3
Glass door, double wing, with 3 mm SPSG
Sheet steel door, double wing, with passive ventilation (honeycomb perforation, 81 % open area)
Top cover panels IP54, one-piece, solid
Depth Width 800 600 506905015 800 506915015 900 506920015 1000 506930015 1200 506940015
Two-piece, with brush strip Depth Width 800 600 506920095 800 506920105 900 506920115 1000 506930115 1200 506940115
Two-piece, prepared for brush strip (supplied), 6 knockouts for fans
Two-piece, with brush strip, 4 fans, assembled
Two-piece, with brush strip, 2 fans, assembled Depth Width 800 600 506905045 800 506915045 900 506920045 1000 506906805 1200 506907805
Depth Width 800 600 506905055 800 506915075 900 506920075 1000 506920135 1200 506920145
One-piece, prepared for brush strip (supplied), and large fan
Depth Width 800 600 506905065 800 506915065 900 506920065 1000 506920125 1200 506920225
4
Sheet steel door, single wing, with passive ventilation (honeycomb perforation, 81 % open area)
Depth Width 800 600 – 800 506915085 900 506920055 1000 506906205 1200 506906305
Bottom cover panels Multi-piece, with brush
Depth Width 800 600 506805035 800 506815035 900 506820035 1000 506806605 1200 506806705
Two-piece, with passive venting Depth Width 800 600 506805025 800 506815025 900 506820025 1000 –
5
SCHÄFER IS-1
System Accessories
General Accessories 482.6 mm (19“) shelf, pull-out The pull-out version of the 482.6 mm (19“) shelf with passive venting is installed in the pitch pattern of the front and rear 482.6 (19”) mounting plane. Material: 1.00 mm sheet steel Finish: powder coated in RAL 7035 Static load capacity: 50 kg Delivery comprises: 1 shelf, telescopic rails, fixing accessories Can be used in racks of all manufacturers Installation dimensions of 440 mm to 850 mm
482.6 mm (19“) shelf
RAL 7035 (light grey) Width (mm)
Depth (mm)
Order no.
422 400 6757500* 422 500 6758500 422 600 6760500 * Required space between mounting angles: max. depth + 250 mm, min. depth 500 mm
RAL 9005 (black) Width (mm)
Depth (mm)
Order no.
422 500 6758550 422 600 6760550
RAL 7035 (light grey) The 482.6 (19“) shelf for fixed installation, with passive venting, is mounted in the pitch pattern of the front and rear 482.6 (19”) mounting plane. Material: 1.00 mm sheet steel Finish: powder coated in RAL 7035 Static load capacity: 120 kg Delivery comprises: 1 shelf, fixing materials
Width (mm)
Depth (mm)
Order no.
448 400 6550400* 448 500 6550500 448 600 6550600
RAL 9005 (black) Width (mm)
Depth (mm)
Order no.
400
6550450*
448
Can be used in racks of all manufacturers
448 500 6550550
Installation dimensions of 400 mm to 850 mm
* Required space between mounting angles: max. 650 mm, min. 440 mm
448 600 6550650
Clip nuts, M6 or M8
Clip nuts
Clip nuts for clipping onto the frame. Delivery comprises: 10 clip nuts
Plinth, solid
6
Order no.
M8 507963400
Cabinet
The four clip-on side panels on this solid plinth allow cable routing underneath the IS-1. Material plinth/panels: 1.00 mm steel sheet Finish: powered coated in RAL 7035 Delivery comprises: 4 corner elements with levelling feet, 4 clip-on solid panels
M6 507963300
width
Cabinet
Height
Height
depth
100 mm
200 mm
(mm) (mm) 506312000 506312200
300
1200
600
600
506723000
600
800
506724000
600
900
506725000
600
1000
506723500
600
1200
506727500
700
1000
506523500
700
1200
506524500
800
600
506923000
800
800
506924000 506924200
800
900
506925000 506925200
800
1000
506923500 506923200
800
1200
506924500 506927200
Mounting kit, 482.6 (19“)
Mounting kit
For mounting 482.6 (19“) components. Delivery comprises: 50 cage nuts M5/M6, 50 M5/M6 x 16 oval head screws, 50 plastic washers
482.6 mm (19“) Blind panel Used for covering empty spaces or for the installation of specific individual components. Material: 1.50 mm sheet steel Finish: powder coating Delivery comprises: 2 blind panels, fixing accessories
Order no.
M5 7963200 M6 7963000
RAL 7035 (light grey) Height units (U)
Order no.
1 7976000 2 7976500 3 7977000 4 7978500
RAL 9005 (black) Height units (U)
Order no.
1 7976050 2 7976550 3 7977050 4 7978550 5 7976850
482.6 mm (19“) Clip-on blind panel Blind panel for one-handed installation. Material: ABS Delivery comprises: 10 blind panels
IS-1 baying kit
RAL 9005 (black) Blind panel
Order no.
1 U
7978450
RAL 7035 (light grey) For fast, easy and mechanically stable baying of IT cabinets. The baying kit does not interfere with the installation plane in the cabinet interior. Material: steel Finish: powder coated in RAL 7035/9005 Delivery comprises: 1 baying kit (4 pieces)
Baying kit
Order no.
For IS-1 Rack to IS-1 Rack
506790200*
RAL 9005 (black) Baying kit
Order no.
For IS-1 Rack to IS-1 Rack
506790350*
* incl. plug-in seal
Universal depth stay For cable routing and for securing individual components, e.g. mounting angles. Material: steel Finish: galvanised Delivery comprises: 2 universal depth stays
Universal Cabinet depth stay
Order no.
depth
(mm)
600
506744100
800
506744200
900
506744300
1000
506744400
1200
506744500
7
More information?
Your competent partner for IT cabinets and infrastructure
We‘ll make your data center fit for the future Efficient and reliable IT infrastructure solutions
Print no. 0125/02.13 We reserve the right to make technical modifications
Print No. 0136/11.12 We reserve the right of technical alterations.
SCHÄFER IT-Systems – The specialists for IT infrastructure
gu e Cata lo 013 2012 /2 1
IT_Katalog_11_2012_neu_GB_.indd 1
20.11.2012 09:50:53
www.schaefer-it-systems.com
1
IT_Rechenzentrum_RZ_GB.indd 1
20.02.2013 08:09:33
SCHÄFER IT Systems, an innovative manufacturer of made-to-measure network and server cabinet solutions for both conventional and complex applications, is part of the internationally successful company SCHÄFER WERKE. The owner-led group of companies has its headquarters in Neunkirchen in Germany’s Siegerland region. The work of all the SCHÄFER WERKE divisions – SCHÄFER IT Systems, SCHÄFER Industrial Solutions, SCHÄFER Interior Systems, SCHÄFER Container Systems, SCHÄFER Perforated Metal, EMW Steel Service Center – is based on high-quality fine steel sheet. The processing of this material is one of the core competencies of this enterprise.
Neunkirchen plant
Betzdorf plant
Ledecˇ nad Sázavou plant (CZ)
SCHÄFER Ausstattungs-Systeme GmbH Pfannenbergstraße 1 · D-57290 Neunkirchen Sales and Production: Industriestraße 41 · D-57518 Betzdorf Tel. +49 (0) 2741/283-770 · Fax +49 (0) 2741/283-798 E-Mail:
[email protected] www.schaefer-it-systems.com
8
Print no. 0129/02.13 · We reserve the right to make technical modifications
Our production plants
