Transcript
KeyBatch™ Flash Drive Mode Setup Guide The default output format of each record in the file created for the KeyBatch™ BR2 in Flash Drive mode is: ,,,, However, this guide allows you to customize this format to make it suitable for your own application. The following aspects of the output format are configurable. Scan the configuration barcodes on the following page to select the various options.
Note: Additional formatting options are available. Contact SerialIO for more information.
Date format Time format Field separator
Format On/Off Quantity field size
Field output sequence
7 date formats are supported (see the following page). 2 time formats are supported (hh:mm:ss and hh:mm). The field separator is the character that is used to separate the various fields of the output file. 8 different separators can be selected. By enabling the Format option, you can hold the Function Button (small button) for 10 seconds to clear the contents of the KeyBatch™. The default quantity field size is 6 characters. This can be changed from 1 to 8 characters. Note: If Quantity is included all duplicate scans will increment in the quantity field. If you need duplicate scans to show on separate lines, do not include Quantity in the scanner setup (4 output fields instead of 5). Example: Scan Barcode in field 1, Serial in field 2, Time in field 3, Date in field 4, and in field 5. This will remove Quantity and allow duplicate scans on separate rows. Each record can contain up to 5 fields (barcode, date, time, quantity, and serial number). The output sequence can be customized by scanning up to 5 labels in the corresponding sequence field. By not specifying “Quantity”, each barcode will be stored separately in the database. The “Barcode” field is required. Example: If you only want “Barcode” and “Date”, scan Barcode in field 1, Date in field 2, and for fields 3-5.
Flash Drive / Virtual COMM Toggle ÌÄC01mÎ USB Virtual Comm ÌÄC04yÎ USB FLASH Drive USB FLASH Drive must be scanned to enable Flash Drive Mode on the KeyBatch™
Date Format
Quantity Field Size
Field Separator
ÌÄ[+D0\Î
ÌÄ[+Q1.Î
ÌÄ[+FC\Î
DD-MM-YYYY
1
Comma *
ÌÄ[+D1aÎ
ÌÄ[+Q23Î
ÌÄ[+FHuÎ
MM-DD-YYYY
2
Semicolon
ÌÄ[+D2fÎ
ÌÄ[+Q38Î
ÌÄ[+FL"Î
DD-MM-YY
3
LF
ÌÄ[+D8ÈÎ
ÌÄ[+Q4=Î
ÌÄ[+FP6Î
DD/MM/YYYY *
4
Pipe
ÌÄ[+D9"Î
ÌÄ[+Q5BÎ
ÌÄ[+FC\Î
MM/DD/YYYY
5
CR
ÌÄ[+DAJÎ
ÌÄ[+Q6GÎ
ÌÄ[+FSEÎ
DD/MM/YY
6*
Slash
ÌÄ[+DBOÎ
ÌÄ[+Q7LÎ
ÌÄ[+FTJÎ
MM/DD/YY
7
Tab
ÌÄ[+Q8QÎ 8
Time Format
Format On/Off * indicates Default
ÌÄ[+T05Î
ÌÄ]+DNOtÎ
HH:MM:SS *
Format Off *
ÌÄ[+T1:Î
ÌÄ]+DEL5Î
HH:MM
Format On
Output Sequence (Field 1)
Output Sequence (Field 2)
Output Sequence (Field 3)
ÌÄ]+S0B3Î
ÌÄ]+S1B8Î
ÌÄ]+S2B=Î
Barcode *
Barcode
Barcode
ÌÄ]+S0Q&Î
ÌÄ]+S1Q+Î
ÌÄ]+S2Q0Î
Quantity
Quantity *
Quantity
ÌÄ]+S0S2Î
ÌÄ]+S1S7Î
ÌÄ]+S2S<Î
Serial #
Serial #
Serial # *
ÌÄ]+S0T8Î
ÌÄ]+S1T=Î
ÌÄ]+S2TBÎ
Time
Time
Time
ÌÄ]+S0D?Î
ÌÄ]+S1DDÎ
ÌÄ]+S2DIÎ
Date
Date
Date
ÌÄ]+S1NÄÎ
ÌÄ]+S2NÉÎ
Output Sequence (Field 4)
Output Sequence (Field 5)
ÌÄ]+S3BBÎ
ÌÄ]+S4BGÎ
Barcode
Barcode
ÌÄ]+S3Q5Î
ÌÄ]+S4Q:Î
Quantity
Quantity
ÌÄ]+S3SAÎ
ÌÄ]+S4SFÎ
Serial #
Serial #
ÌÄ]+S3TGÎ
ÌÄ]+S4TLÎ
Time *
Time
ÌÄ]+S3DNÎ
ÌÄ]+S4DSÎ
Date
Date *
ÌÄ]+S3N#Î
ÌÄ]+S4N(Î
SerialMagic Professional Format To use the Keybatch BR2 in Flash Drive mode with SerialMagic Professional, use the below formatting:
Set the Keybatch BR2 as a Flash Drive ÌÄC04yÎ Set Scanner Format Set the Date Format
Set the Delimiter
ÌÄ[+D8ÈÎ
ÌÄ[+FC\Î
DD/MM/YYYY
Comma
Set the Time Format
Disable Formatting
ÌÄ[+T05Î
ÌÄ]+DNOtÎ
HH:MM:SS
Format Off
Set Field Format Field 1
ÌÄ]+S0B3Î Barcode
Field 2
ÌÄ]+S1S7Î Serial #
Field 3
ÌÄ]+S2TBÎ Time
Field 4
ÌÄ]+S3DNÎ Date
Field 5
ÌÄ]+S4N(Î
Example Output
