Preview only show first 10 pages with watermark. For full document please download

The Lightness Of A Wireless World

Rating
Date

October 2018
Size

15.4MB
Views

270
Categories

Home Lighting Floodlights

Transcript

The lightness of a wireless world COMPLETE WIRELESS EN SOLUTIONS FOR CONTROL AUTOMATION, LIGHT AND LOADS COMPLETE WIRELESS SOLUTIONS INDOOR LIGHTS AND LOADS To control automated devices, lights and loads Simple to program and install, even in complex projects In residential and commercial buildings All under control with just one control unit, even from a distance via mobile phone or PC ROLLER SHUTTERS GATES OUTDOOR LIGHTS AND LOADS SUNBLINDS SCREENS ADJUSTABLE SLATS ROLLER SHUTTER DOORS HEATING VENTILATION A WIRELESS SYSTEM EASY TO CONNECT FOR THE INSTALLER A WIRELESS SYSTEM EASY TO USE FOR THE END USER Simple Easy Cutting-edge technology for all Step-by-step programming simply using keys while being guided by sound signals and visual displays. Simple, instantaneous solutions for use, with a practical, user-friendly design. A single control with a user-friendly design that fits comfortably into your hand, for controlling all automated devices, lights and loads in the home, office, hotel or community/social centre. Versatile Truly compact for installation anywhere. Small components installable where you want, even in restricted spaces: they can be mounted on a wall, DIN rail, suspended ceiling, recessed or even concealed inside wall plates. 6:30 am Complete A single, instantaneous solution for controlling any automation, light or load on the market. All done via radio with no extra wiring or mixed systems (via radio and wiring), thereby avoiding complex home automation systems. 8:30 am 09:00 pm Adaptable Creation of scenes in line with your lifestyle. A system that allows you to program various on/off combinations and adjustments of automated devices, lights and loads through a user-friendly interface. Economic Quick Real savings in installation times A wireless system drastically reduces installation times: no need for complicated building work or excavations to lay cable troughs or conduits 4 A radio system that makes the installation economic in new builds and in renovations. A solution that avoids the bother of having to do building work for control cable run. Convenient Remote control through PC or phone A single user-friendly interface to adapt the whole home to your habits. Truly easy-to-program weekly timer and lighting scenes. 5 ADAPT YOUR HOME TO YOUR HABITS WITH JUST A TOUCH OF TABLET, SMARTPHONE OR PC Fluorescent lamps Outdoor lights Indoor lights Resistive and infrared heaters Roller shutters Roller shutter doors Ventilation and extraction LED lights Outdoor loads Outdoor loads Control everything from Myhand’s user-friendly interface So simple to create scenes and program the weekly timer It takes just a few seconds to connect up to the automated devices without having to install dedicated applications Its stylish and modern design means that My Hand fits in discreetly anywhere in your home. To get more information about MyHand, see page 104. 6 7 YOUR SOLUTION IN 3 STEPS 1 What do you want to control? A gate? A blind? A heater?... GO TO THE RELATIVE SECTION LED LIGHTS INCANDESCENT, HALOGEN AND 230 Page 10 VAC LED LIGHTS Page 28 0-10V/1-10V AND DALI DEVICES Page 38 ON/OFF - INDOOR LIGHTS AND LOADS Page 42 ON/OFF - OUTDOOR LIGHTS AND LOADS Page 50 RESISTIVE OR INFRARED HEATERS Page 54 VENTILATION AND EXTRACTION Page 60 GATES/SHARED ACCESS POINTS/AUTOMATED DEVICES VIA WIRELESS/GSM CONTROL Page 64 ROLLER SHUTTER DOORS Page 72 ADJUSTABLE SLATS Page 80 AWNINGS AND SCREENS Page 90 ROLLER SHUTTERS AND VENETIAN BLINDS Page 98 2 How do you want to use the control? From a wall-mounted control? Portable? Smartphone? CONTROL SYSTEM WITH PC OR SMARTPHONE Page 104 CONTROL SYSTEMS - WIRELESS TRANSMITTER: WALL-MOUNTED, TABLETOP, PORTABLE, RECESSED, WITH KEYPAD OR SENSORS Page 108 Moreover you will find: ACCESSORIES Page 126 TAK - Access control system (up to 2000 transmitters) 433 - 433MHz Transmitters and receivers KIT EASY - Packaged control kits Alphabetical index Page 130 Page 132 Page 134 Page 136 3 8 CONTACT US Control system for LED lights Control system for LED lights A complete solution for the uncomplicated creation and control of multiple, complex scenes, both indoor and outdoor, using a single control device. Interesting atmospheres and colour schemes can all be created within the same environment. 10 11 Control system for LED lights Dimmer - Constant voltage LED - Receiver selection guide false ceiling MASTER + SLAVE Dimmer - Constant current LED - Receiver selection guide TVSTRD868SI24G (Page 16) false ceiling MASTER + SLAVE (BUS Technology) (Page 16) TVSPOT868ADI04 DIN rail (1-10V iput) (Page 21) TVSTRD868NT27 (Page 17) (3 outputs) (Page 17) false ceiling (Page 21) (1-10V input) TVSTRD868NT24 false ceiling (700 mA) TVSTRD868DI24G wall-mounted or outdoor TUNABLE WHITE TVSPOT868BI01 1 COLOUR (Page 16) DIN rail MASTER + SLAVE TVSTRD868BSI24G (Page 17) MASTER + SLAVE TVSTRDW868ST24 (Page 17) MASTER + SLAVE TVRGBDU868ST24 (Page 18) CONSTANT CURRENT LED false ceiling (Page 18) (350 mA) (700 mA) (Page 21) TVRGBDSY868A01 RGB (Syncroled 350 mA) (Page 22) TVRGBDSY868B01 (Syncroled 700 mA) (Page 18) (BUS Technology) TVRGBDU868A01 TVRGBDU868B01 (Syncroled Technology) TVLRGBDU868ST24 MASTER + SLAVE (Page 21) TVRGBDSY868ST24 CONSTANT VOLTAGE LED (350 mA) (Page 21) TVLSTRD868SI24G 1 COLOUR TVSPOT868AI01 (Page 22) DIN rail TVRGBDU868AD02 (Page 22) TVRGBDMX868AD02 RGB TVRGBDU868DT24 (Page 19) DIN rail (DALI/DMX input) (Page 22) TVRGBDMX868DT24 (DMX/DALI input) (Page 19) wall-mounted or outdoor TVRGBDU868NT24 (Page 19) MASTER + SLAVE RGBW false ceiling MASTER + SLAVE TVRGBDU868BST24 (Page 20) TVSRGBWU868ST25 (Page 20) TVLSRGBWU868ST25 (BUS Technology) (Page 20) 12 13 Control system for LED lights TVRGBDU868AD02 TVRGBDMX868AD02 TVSPOT868ADI04 TVRGBDSY868B01 • • • • RGB spotlight • • • • • • • • • • • • • • • • • • • • Installation • • • • • • • • • • • 12-24 Vdc • • • • • • • • • • 350mA 24 Vdc • • • • • • • • • 3 3 4 3 1 3 2 3* 3* • • • • • • • • • • • • • • • 3* 3* 3* 3* 3* 4** 4** • 700mA 3 • • • • • • • • • • • • • • • • • • • • • • • • • 3 4 • • • • • • • • • • • • • 3* 3* 3* 3* 8W 4W/8W 4W 8W 4W 8W 4W/8W 4W/8W 16W 8W/16W 8W 16W 8W 16W 8W/16W 8W/16W 16W/32W 16W/32W 16W/32W • • • • • • • • • • • • • • • • • • • 20 20 • • 20 20 Slave Standard • 3* DMX/DALI Compatible with FreeLED • 3* Compatible with FreeLED • DMX/DALI • 4W • 4 n.o. / 4 x 1-10V • • 8W 3 n.o. • • • • 24 Vdc 4 n.o. / 4 x 1-10V • • • Wired inputs Wired inputs 2 n.o. • 12 Vdc 48 Vdc • 60W (24 Vdc) • Power x output Power x output 30W (12 Vdc) • • Outputs Outputs • • Output current Power supply • • 48 Vdc • 12 Vdc • Power supply • • outdoor recessed for aluminium profile • DIN rail false ceiling DIN rail • • • • • • Syncroled Compatible with Green Mouse IP • • • • • 20 • Slave Standard • TVRGBDSY868A01 • Installation 3 n.o. • TVRGBDU868B01 • • tunable white 100W (24 Vdc) • TVRGBDU868A01 • RGB strips 50W (12 Vdc) • Type of LED 1-colour spotlight RGBW strips false ceiling TVSPOT868BI01 Type of LED 1-colour LED strips TVSPOT868AI01 Model/Code TVLSRGBWU868ST25 TVSRGBWU868ST25 TVRGBDU868BST24 Dimmer - Constant current LED - Comparison table TVRGBDU868NT24 • TVRGBDMX868DT24 TVSTRD868BSI24G • TVRGBDU868DT24 TVSTRD868NT27 • TVLRGBDU868ST24 TVSTRD868NT24 • TVRGBDSY868ST24 TVSTRD868DI24G • TVRGBDU868ST24 TVLSTRD868SI24G • TVSTRDW868ST24 TVSTRD868SI24G Model/Code Dimmer - Constant voltage LED - Comparison table * 3 outputs: R+G+B • • • • • • BUS • 20 20 20 20 ** 4 outputs: R+G+B+White • • • • Syncroled IP 20 * 3 outputs: R+G+B 14 20 20 44 44 54 20 20 20 20 20 20 44 54 20 20 ** 4 outputs: R+G+B+White 15 Control system for LED lights Dimmer - 12/24 Vdc Constant voltage LED - 1-colour STRD - 3 independent or synchronized outputs Dimmer with built-in radio receiver for the control of 12/24 Vdc 1-colour LED strips. It is ideal for false ceiling. Compatible with Green Mouse, for automatic room brightness control. • Independent or synchronized control of outputs • Pushbutton input for manual controls • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Possibility to connect SLAVE devices (max 5) that replicate the MASTER’s functions • MASTER/SLAVE connecting cable provided (maximum length 30 cm) • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVSTRD868SI24G Dimmer with built-in radio receiver for the control of 12/24 Vdc 1-colour LED strips. Ideal for aluminium profile, with mounting brackets. Compatible with Green Mouse, for automatic room brightness control. • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters Dimmer SLAVE for 12/24 Vdc LED strips Code: TVRGBD000ST24 TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP44 Dimensions: 20 x 30 x 252 mm 1 output Code: TVSTRD868NT27 3 independent/synchronized outputs Code: TVSTRD868NT24 STRD BUS - 3 independent or synchronized outputs with BUS STRD - 3 independent or synchronized outputs Dimmer with built-in radio receiver for the control of 24 Vdc 1-colour LED strips. BUS technology to synchronise MASTER and SLAVE (More information on page 24). It is ideal for false ceiling. Compatible with Green Mouse, for automatic room brightness control. TECHNICAL SPECIFICATIONS: Dimmer with built-in radio receiver for the control of 12/24 Vdc 1-colour LED strips. Ideal for outdoor installations using box IP54. Compatible with Green Mouse, for automatic room brightness control. • Independent or synchronized control of outputs • Pushbutton input for manual controls • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Possibility to connect BUS SLAVE devices (max 40) that replicate the MASTER’s functions • Maximum total length of the BUS connection: 200 m • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters Code: TVLSTRD868SI24G Power supply: 24 Vdc Maximum power: 100W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Dimmer BUS SLAVE 24 Vdc LED strips Code: TVLRGBD000ST24 STRD - 4 independent or synchronized outputs, 1-10V input Dimmer with built-in radio receiver for the control of 12/24 Vdc 1-colour LED strips. It is ideal for DIN rail. Compatible with Green Mouse, for automatic room brightness control. • Independent or synchronized control of outputs • Pushbutton input for manual controls and 1-10V devices • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters 16 NANO - 1 output • Independent or synchronized control of outputs • Pushbutton input for manual controls • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Possibility to connect SLAVE devices (max 5) that replicate the MASTER’s functions • MASTER/SLAVE connecting cable provided (maximum length 30 cm) • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP54 Dimensions: 230 x 70 x 51 mm Code: TVSTRD868BSI24G Dimmer SLAVE for 12/24 Vdc LED strips Code: TVRGBD000BST24 Dimmer - 12/24 Vdc Constant voltage LED - 1/ 2-colours TECHNICAL SPECIFICATIONS: DYNAMIC - Tunable white with 2 outputs Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP20 Dimensions: 90 x 87 x 60 mm Dimmer with built-in radio receiver and tunable white for the control of two 12/24 Vdc 1-colour LED strips or one 12/24 Vdc 2-colour LED strips. It is ideal for false ceiling. A single solution for mixing warm and cold white colours to reproduce all temperature variations. Code: TVSTRD868DI24G • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes of intensity and colour temperature • Pushbutton input for manual controls • Possibility to connect SLAVE devices (max 5) that replicate the MASTER’s functions • MASTER/SLAVE connecting cable provided (maximum length 30 cm) • Calling the programmed values with a 7- or 42-channel transmitter • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x 2 outputs) - 24 Vdc power supply: 100W (x 2 outputs) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVSTRDW868ST24 Dimmer SLAVE for 12/24 Vdc LED strips Code: TVRGBD000ST24 17 Control system for LED lights Dimmer - 12/24 Vdc Constant voltage LED - RGB Dimmer with built-in radio receiver for the control of 12/24 Vdc RGB LED strips (red, green, blue). It is ideal for DIN rail. RGB - 3 RGB outputs Dimmer with built-in radio receiver for the control of 12/24 Vdc RGB LED strips (red, green, blue). It is ideal for false ceiling. • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Pushbutton input for manual controls • Possibility to connect SLAVE devices (max 5) that replicate the MASTER’s functions • MASTER/SLAVE connecting cable provided (maximum length 30 cm) • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVRGBDU868ST24 Dimmer SLAVE for 12/24 Vdc LED strips Code: TVRGBD000ST24 • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Pushbutton input for manual controls • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP20 Dimensions: 90 x 87 x 60 mm Code: TVRGBDU868DT24 RGB SYNCROLED - 3 RGB outputs with Syncroled RGB - 3 RGB outputs and DALI/DMX inputs Dimmer with built-in radio receiver for the control of 12/24 Vdc RGB LED strips (red, green, blue). Syncroled Technology to wireless synchronise MASTER and SLAVE (More information on page 24). It is ideal for false ceiling. Dimmer with built-in radio receiver for the control of 12/24 Vdc RGB LED strips (red, green, blue). It is ideal for DIN rail. • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Pushbutton input for manual controls • Possibility to connect SLAVE devices (Syncroled or standard cable) that replicate the MASTER’s functions • The minimum distance between MASTER and SLAVE is 5 m and the maximum is 100 m in free space. The minimum distance between Syncroled SLAVES is 3m • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVRGBDSY868ST24 Dimmer SYNCROLED SLAVE for 12/24 Vdc LED strips Code: TVRGBDSY868SL24 Dimmer SLAVE for 12/24 Vdc LED strips Code: TVRGBD000ST24 RGB BUS - 3 RGB outputs with BUS Dimmer with built-in radio receiver for the control of 24 Vdc RGB LED strips (red, green, blue). BUS Technology to synchronise MASTER and SLAVE (More information on page 24). It is ideal for false ceiling. • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Pushbutton input for manual controls • Possibility to connect BUS SLAVE devices (max 40) that replicate the MASTER’s functions • Maximum total length of the BUS connection: 200 m • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter 18 RGB - 3 RGB outputs TECHNICAL SPECIFICATIONS: Power supply: 24 Vdc Maximum power: 100W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVLRGBDU868ST24 Dimmer BUS SLAVE for 24 Vdc LED strips Code: TVLRGBD000ST24 • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • If controlled through DALI/DMX inputs (higher priority), it may also be used for the independent control of the 3 outputs • Conﬁguration through dip-switch of the DALI or DMX addresses assigned to the outputs • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP20 Dimensions: 90 x 87 x 60 mm Code: TVRGBDMX868DT24 NANO - 3 RGB outputs Dimmer with built-in radio receiver for the control of 12/24 Vdc RGB LED strips (red, green, blue). Ideal for aluminium profile, with mounting brackets. • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP44 Dimensions: 20 x 30 x 252 mm Code: TVRGBDU868NT24 19 Control system for LED lights Dimmer - 350/700 mA Constant current LED - 1-colour RGB - 3 RGB outputs Dimmer with built-in radio receiver for the control of 12/24 Vdc RGB LED strips (red, green, blue). Ideal for outdoor installations using box IP54. • Pushbutton input for manual controls • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Possibility to connect SLAVE devices that replicate the MASTER’s functions • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 50W (x output) - 24 Vdc power supply: 100W (x output) Protection rating: IP54 Dimensions: 230 x 70 x 51 mm Code: TVRGBDU868BST24 Dimmer SLAVE for 12/24 Vdc LED strip Code: TVRGBD000BST24 SPOT - 3 independent or synchronized outputs Dimmer with built-in radio receiver for the control of 350/700 mA 1-colour LED strips. It is ideal for false ceiling. • Independent or synchronized control of outputs • Pushbutton input for manual controls • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Possibility to connect SLAVE devices (max 5) that replicate the MASTER’s functions • MASTER/SLAVE connecting cable provided (maximum length 30 cm) • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters Dimmer - 12/24 Vdc Constant voltage LED - RGB+W TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 30W (x output) - 24 Vdc power supply: 60W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVSRGBWU868ST25 Dimmer SLAVE with 4 outputs for LED 12/24 Vdc. Code: TVRGBW000ST25 RGBW BUS - 4 RGB+W outputs with BUS Dimmer with built-in radio receiver for the control of 24 Vdc RGB LED strips (red, green, blue) and white (warm and cold). BUS Technology to synchronise MASTER and SLAVE (More information on page 24). It is ideal for false ceiling. • Possibility to select the desired colour adding the white colour of the 4th output for the better definition of the colour temperature • The RGB and white outputs are controlled independently by transmitter or manually operated pushbuttons • If controlled with 7-channel wireless transmitter, you can choose from 8 preset colours (changeable at any time) or activate the automatic colour cycle • Possibility to connect BUS SLAVE devices (max 40) that replicate the MASTER’s functions • Maximum total length of the BUS connection: 200 m • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter 20 Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 4W (350mA); 8W (700mA) - 24 Vdc power supply: 8W (350mA); 16W(700mA) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm 350 mA version Code: TVSPOT868AI01 700 mA version Code: TVSPOT868BI01 350 mA Dimmer SLAVE Code: TVRGB000M01 700 mA Dimmer SLAVE Code: TVRGB000N01 SPOT - 4 independent outputs, 1-10V input RGBW - 4 RGB+W outputs Dimmer with built-in radio receiver for the control of 12/24 Vdc RGB LED strips (red, green, blue) and white (warm and cold). It is ideal for false ceiling. • Possibility to select the desired colour adding the white colour of the 4th output for the better definition of the colour temperature • The RGB and white outputs are controlled independently by transmitter or manually operated pushbuttons • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours and 4 white light scenes (changeable at any time) or activate the automatic colour cycle • Possibility to connect SLAVE devices (max 5) that replicate the MASTER’s functions • MASTER/SLAVE connecting cable provided (maximum length 30 cm) • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 24 Vdc Maximum power: 60W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code:TVLSRGBWU868ST25 Dimmer BUS SLAVE with 4 outputs for 24 Vdc LED strips Code: TVLRGBW000ST25 Dimmer with built-in radio receiver for the control of 350/700 mA 1-colour LED strips. It is ideal for DIN rail. • Input voltage up to 48 Vdc • Selectable output current (350 or 700 mA) • Independent or synchronized control of outputs • Pushbutton input for manual controls e dispositivi 1-10V • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 12/24/48 Vdc Maximum power: - 12 Vdc power supply: 4W (350mA); 8W (700mA) - 24 Vdc power supply: 8W (350mA); 16W(700mA) - 48 Vdc power supply: 16W (350mA); 32W(700mA) Protection rating: IP20 Dimensions: 105 x 90 x 60 mm Code: TVSPOT868ADI04 Dimmer - 350/700 mA Constant current LED - RGB RGB - 3 RGB outputs Dimmer with built-in radio receiver for the control of 350/700 mA RGB LED strips (red, green, blue). It is ideal for false ceiling. • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Pushbutton input for manual controls • Possibility to connect SLAVE devices (max 5) that replicate the MASTER’s functions • MASTER/SLAVE connecting cable provided (maximum length 30 cm) • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vdc Maximum power: - 12 Vdc power supply: 4W (350mA); 8W (700mA) - 24 Vdc power supply: 8W (350mA); 16W(700mA) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm 350 mA version Code: TVRGBDU868A01 700 mA version Code: TVRGBDU868B01 350 mA Dimmer SLAVE Code: TVRGB000M01 700 mA Dimmer SLAVE Code: TVRGB000N01 21 Control system for LED lights RGB SYNCROLED - 3 RGB outputs with Syncroled System for the management of RGB lighting with PC Dimmer with built-in radio receiver for the control of 350/700 mA TECHNICAL SPECIFICATIONS: RGB LED strips (red, green, blue). Syncroled Technology to wireless Power supply: 12/24 Vdc synchronise MASTER and SLAVE. It is ideal for false ceiling. Maximum power: • If controlled with 7-channel wireless transmitter, you can choose from 8 preset colours (changeable at any time) or activate the automatic colour cycle • Pushbutton input for manual controls • Possibility to connect SLAVE devices (Syncroled or standard cable) that replicate the MASTER’s functions • The minimum distance between MASTER and SLAVE is 5 m and the maximum is 100 m in free space. The minimum distance between Syncroled SLAVES is 3m • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter FREELED A system for the management of RGB lighting of scenes. It allows to create atmospheres with infinite possibilities of customizations in colours and effects setting, all in 3 steps. - 12 Vdc power supply: 4W (350mA); 8W (700mA) - 24 Vdc power supply: 8W (350mA); 16W(700mA) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm The system includes: • a dedicated PC software to create the scenes • an USB transmitter (TVTXQ868U07) to send the scenes to compatible receivers by means of a simple radio transmission. 350 mA version Code: TVRGBDSY868A01 700 mA version Code: TVRGBDSY868B01 350 mA dimmer SLAVE Code: TVRGB000M01 Connect the USB transmitter to PC and use the software to create the scenes and colour sequences. RGB - 3 RGB outputs • Input voltage up to 48 Vdc • Selectable output current (350 or 700 mA) • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Pushbutton input for manual controls • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter TECHNICAL SPECIFICATIONS: Power supply: 12/24/48 Vdc Maximum power: - 12 Vdc power supply: 4W(350mA); 8W(700mA) - 24 Vdc power supply: 8W(350mA); 16W(700mA) - 48 Vdc power supply: 16W(350mA); 32W(700mA) Protection rating: IP20 Dimensions: 105 x 90 x 60 mm Code: TVRGBDU868AD02 Code: TVTXQ868U07 (Software downloadable from telecoautomation.com / Reserved Area) 2 1 700 mA dimmer SLAVE Code: TVRGB000N01 Dimmer with built-in radio receiver for the control of 350/700 mA RGB LED (red, green, blue). It is ideal for DIN rail. Power supply: 3V or from USB connection Lithium battery: CR2430 Connection: USB cable (A / Mini-B) Dimensions: 122 x 42 x 16 mm Scenes creation and sending can be performed even in different time and place. 350 mA dimmer SYNCROLED SLAVE Code: TVRGBDSY868M01 700 mA dimmer SYNCROLED SLAVE Code: TVRGBDSY868N01 TECHNICAL SPECIFICATIONS: In case the code of the receiver is known, sending and receiving of the scenes is automatic, by means of a simple command, otherwise memorize USB transmitter. 3 Memorize a new transmitter with at least 4 channels, reserved for the command of the 4 loaded scenes. RGBDMX - 3 RGB outputs and DALI/DMX inputs Dimmer with built-in radio receiver for the control of 350/700 mA RGB LED (red, green, blue). It is ideal for DIN rail. • Input voltage up to 48 Vdc • Selectable output current (350 or 700 mA) • If controlled through DALI/DMX inputs (higher priority), it may also be used for the independent control of the 3 outputs • Conﬁguration through dip-switch of the DALI or DMX addresses assigned to the outputs • If controlled with 7-channel wireless transmitter, you can choose from 8 pre-set colours (changeable at any time) or activate the automatic colour cycle • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 42 transmitters • PC programmable with software FreeLED for the creation of 4 light scenes settable with transmitter 22 TECHNICAL SPECIFICATIONS: Power supply: 12/24/48 Vdc Maximum power per output: - 12 Vdc power supply: 4W (350mA); 8W (700mA) - 24 Vdc power supply: 8W (350mA); 16W(700mA) - 48 Vdc power supply: 16W (350mA); 32W(700mA) Protection rating: IP20 Dimensions: 105 x 90 x 60 mm Code: TVRGBDMX868AD02 Lighting scenes with changes in intensity and colour managed in the simplest way. 23 Dimmer - 12/24 Vdc Constant voltage LED - Connections + + + +TVSTRD868SI24G TVSTRD868SI24G MASTER/SLAVE connecting cable M/S provided (maximum length 30 cm) -- 1-COLOUR TVSTRD868SI24G/ TVSTRD868BSI24G TVLSTRD868SI24G 12-24 Vdc TVSTRD868SI24G Common Power supply + + + Input + + +Output T3 T2 T1 Pushbutton input Max. 5 SLAVE 12-24 Vdc Power supply T3 T2 T1 + + + +- -- -+ + Pushbutton input Slave Output ++ BUS TVSTRD868DI24G TVSTRD868DI24G Synchronized control of outputs TVSTRD868SI24G - - + + TVSTRD868SI24G BUS CABLE (2-CORE CABLE ON THE MARKET) - + 12-24 Vdc Power supply M/S CAVO BUS M/S CAVO STANDARD + - Min. 3 m SLAVE SYNCROLED Max. 5 SLAVE Max . 5 SLAVE SLAVE SLAVE SYNCROLED - Max. 5 SLAVE SLAVE + 3 +- - + + + M/S SYNCROLED - SLAVE Max. 5 SLAVE - + + - - ++ - - + +- - + - + ++- + + + + + TVLSTRD868SI24G TVLSTRD868SI24G Pushbutton input TVRGBDU868ST24 for manual controls - + + - - + + - - +-TVSTRD868NT24 + -- ... + ++ +- - - Input Output TVSRGBWU868ST25 12-24 Vdc Power supply TVRGBDU868NT24 -TVRGBDU868NT24 TVRGBDU868NT24 TVLRGBDU868ST24 + + DALI DMX Antenna ...... ... ... Antenna + +TVSRGBWU868ST25 TVSRGBWU868ST25 - 12-24 ... Vdc Power supply + + - +- - + TVSTRD868NT - + Common ... - - TVRGBDMX868DT24 ......TVRGBDMX868DT24 TVLRGBDU868ST24 ... T + + TVRGBDU868N +- - + - - - ... ... + + - + + + - ... ... + + - + ... ... ... TVRGBDSY868SL24 TVRGBDSY868SL24 - - + + - - TVLRG + + - TVSTR TVLSRGBWU868ST25 TVLSRGBWU868ST2 TVLSRGBWU868ST25 TVRGBW000ST25 - TVSRGBWU868ST25 TVLSRG TVRGB 12-24 Vdc ... Power supply - TVLRGBDU868ST24 TVLRGBDU868ST24 + ++ + + + +- TVRGBDMX868DT24 TVRGBDMX868DT24 + ++-+ - + + - + TVRGBDU868ST24 TVRGBDSY868SL24- +-+ + + ++ -+ + ... ... + - ++ + + + TVRLGBD000ST24 - TVRLGBD000ST24- ... ...... + + ... + +... + +Common TVSRGBWU868ST25 TVLSRGBWU868ST25 TVRGBDU868DT24 + TVSTRD868NT24 + + TVSTRD868NT24 + + Common++ - - + Input + - Output TVRGBDU868DT24 TVRGBDMX868DT24 TVRGBDU868ST24 TVRGBDU868ST24 + + ++ - ++ + + + - TVRGBDMX868DT24 + + - TVSTRD868NT27 TVSTRD868NT27 + + -+--+- + TVRGBD000ST24 TVRGBDU868NT24 TVRGBDU868NT24 + + RGB + ++ + + - + ++ RGB + - ... - + - + ++ + + Common + -+ -- +- + - T + T + + + + ... 12-24 + +-Vdc ... Power+- supply + TVSTRD868DI24G TVRGBDU86 - TVSTRD868NT24 + Common + TVSTRD868NT24 Common + + TVRLGBD000ST24 Input + +- + TVRGBDU868NT24 +- + + +Output + + + ... ... ++ + +- -- + + -+ M/S SYNCROLED + + TVSTR -...... ... TVRGBD000ST24 TVRGBD000ST24 + - ... ... + Pushbutton +TVSTRDW868ST24 + TVSTRDW868ST24 - + +- - + - + ++-... -+ - TVLST - Pushbutton Slave Output input for input for BUS manual + manual ... ... + TVRGBDU868ST24 TVLRGBDU868ST24 + +- TVLRGBDU868ST24 TVSTRD868NT27 TVSTRD868NT27 controls TVRGBDU868ST24 - + controls TVLRGBDU868ST24 +TVRGBDU868ST24 RGB ... Antenna + + - - - - - TVRGBDU868DT24 TVSTRD868DI24G TVRGBDU868DT24 - T3 T2 T1 input for Slave Output manual controls TVSTRDW868ST24 RGB TVSTRD868DI24G TVSTRD868DI24G 24 +-+ Pushbutton - + - M/S SYNCROLED SLAVE - + + T1 +-+ - TVSTRD868SI24G TVSTRD868SI24G SLAVE SYNCROLED - - TVLSTRD868SI24G Max. 5 SLAVE SLAVE SYNCROLED M/S CAVO BUS + ++-+ - - + Input ++ + Output+ ++ - TVSTRD868NT TVRGB + + + - + + TVSTRD868NT27 + + +- -+ TVRGBDU868DT24 + TVRGBDU868DT24 TVRGBDU868ST24 / TVRGBDSY868ST24 + Common Input - - ++ ++ Output -+ T2 - +- - + TVSTRD868DI24G + -- + ++ - 12-24 Vdc + control of outputs TVRGBDMX868DT24 M/S CAVO BUS RGB - +- - -Power supply - + +- - + + Synchronized - TVSTRD868SI24G TVSTRD868NT24 Common + 12-24 Vdc + + Power - -supply + -+--+- + 12-24 Vdc Power supply + + + - TVSTRD868SI24G SLAVE - - + TVSTRD868DI24G TVSTRD868DI24G TVSTRDW868ST24 ... MASTER SYNCROLED Min. 5 m Max. 100 m clearance + + TUNABLE WHITE + + - SYNCROLED (RADIO SYNCHRONIZATION) + + -+--+- + Max. 200 m - Max. 40 SLAVE ++ ... ... SLAVE -++ ... Min. section of the BUS cable 2 x 0,5mm 2 SLAVE - + +- - + Antenna Antenna + + -- Input Output + 12-24 Vdc TVSTRD868NT24 Power supply+ - - + TVSTRD868NT24 TVRGBDU868DT24 TVSTRD868NT27 ... ...... MASTER TVSTRD868NT24TVSTRD868DI24G - - ++ -- + 1-COLOUR 1-COLOUR T1 T2 T3 T4 - Synchronized control of outputs - +TVLSTRD868SI24G - + - TVLSTRD868SI24G ++ T TVRGBDU868DT24 TVSTRDW868ST24 TVSTRDW868ST24 TVRGBDU868DT24 + Common TVSTRD868DI24G TVRGBDU868DT24 - ... M/S CAVO STANDARD + + +Antenna + +- +- -- - + + + + - + + - - ++ - - TVSTRDW868ST24 TVSTRD868DI24G TVSTRD868SI24G n.o. pushbutton or 1-10V input + + -- SLAVE + - + + - TVLSTRD868S 1-COLOUR TVLSTRD868SI24G Common Input +Output +- - - - - TVSTRD868SI24G 1-COLOUR CAVO STANDARD + ... ... 1 MASTER + + + TVLSTRD868SI24G - TVLSTRD868SI24G - - STANDARD CABLE PROVIDED + + - ... + + - ... ... 3 modes to synchronise MASTER and SLAVE + + - + + - + + + - ... + + TVLRGBW000ST25 - - - ... ... ... 25 TVRGBW000ST25 TVRGBW000ST25 ... ... ... ... ... ... ... ... - - TVRGBDU868ST24 TVLRGBDU868ST24 TVRGBW000ST25 + + TVRLGBD000ST24 + 4 ... ... +++TVRGBDSY868SL24 12-24 +-Vdc+ Power supply + Input +Output +- ... + + - + Slave Input Slave Output TVSRGBWU868ST25 TVLSRGBWU868ST25 TVRGBDSY868SL24+ ... + + - ... 26 + + - Power supply + + ... ... TVRGBW000ST25+ + - ... TVRGBW000ST25 Input +-Output +- ... - + - + + Slave - Output TVRGBDSY868SL24 + ... ... - - + + + + ... ... + + - - + + Antenna - - + + - + + ... TVLRGBW000ST25 + + + + - + + - + + -+ -+ 4-WIRE + +- +-+ -+ + - + + - ... - CONNECTION - + -+ + + ... +- - +6-WIRE + -+ - + +- + -+ - + - + + - + ... +- - + + - + - TVRGBDSY000M01/N01 Slave Input Slave Output +- + - +- - +- + + - - - +DALI +DMX + Antenna CONNECTION +- - + + - - + - ++ - + - + - + ... +- ... - - + - + - + + Input 12-24/48 Vdc + power supply + + ... - + TVRGBDU868AD02 + - ... ... + + - ... - + + ... +TVRGBDMX868AD02 CONNECTION + -4-WIRE +- - ... + +- + + - ... - + + ... TVRGBDU868A01/B01 - 6-WIRE CONNECTION + ... +TVRGBDU868AD02 TVRGBDU868AD02 - TVSPOT868ADI04 TVSPOT868ADI04 - TVRGBDU868AD02 + + - + +- - TVRGBDSY868M01 / TVRGBDSY868N01 ... - - +- ... +- - TVRGBDSY000M01/N01 + + 12/24 Vdc +- +Power+supply + + - ... - - + + - - - + + +- +- +- ... ... ... ... + - TVRGB000M01/N01 TVRGBDMX868AD02 + + - +- - + ... + TVRGB Slave Output ... 4-WIRE CONNECTION - + + +- + + + + TVRGBDU868AD02 + + - -- - TVRGBDSY000M01/N01 +- +Common TVRGBDU868AD02 - + + - - - +TVRGBDU868A01/B01 TVRGBDU868A01/B01 TVRGBDSY000M01/N01 TVRGBDSY000M01/N01 - 24 Vdc Power supply + + - - TVSPOT868AI01/BI01 ... TVRGBDMX868AD02 + +- + + Slave - Connections + + - - TVSPOT868ADI04 TVSPOT868ADI04 RGB - + - TVSPOT868AI01/BI01 TVSPOT868AI01/BI01 TVRGB000M01/N01 Input Output TVRGB000M01/N01 TVRGB000M01/N01 + 12-24/48 Vdc TVRGB000M01/N01 TVRGBDU868AD02 power supply TVRGBDMX868AD02 ... TVRGBDU868A01/B01 or 1-10V input + - Common +- + - TVRGBDSY000M01/N01 - ... TVRGB000M01 / TVRGB000N01 - - + - - TVRGB000M01/N01 TVRGBW000ST25 TVRGBDSY000M01/N01 + + - + + - - + + - ... - + Common + ...TVSPOT868ADI04 6-WIRE CONNECTION TVRGB000M01/N01 TVRGBDU868A01/B01 TVRGBDU868A01/B01 + + TVRGBDSY000M01/N01 + + TVRGBDU868AD02 TVSPOT868ADI04 + ++ C T2 T3 -T4 + + + + + + Pushbutton - - + + + + + - - + + - ... + RGB + TVRGBDU868AD02 TVRGBDU868A01/B01 - TVRGBW000ST25 + +- ... - 4-WIRE CONNECTION TVRGBDU868A01/B01 - + Common + + - Input ... Output TVLSRGBWU868ST25 ... BUS TVRGBW000ST25 TVLRGBW000ST25 + + - ... TVLSRGBWU868ST25 + - TVLRGBD000ST25 ... + TVRLGBD000ST24 - + + - + + + 12-24 Vdc ... ... ... TVRLGBD000ST24 TVRGBDSY868SL24 - + TVRGB000M01/N01 - + TVLRGBDU868ST24 12-24 Vdc Power supply Input +Output +- TVRGBDSY868SL24+ ... +- -Common - ... TVLRGBDU868ST24 + + - ... - BUS + + ++ - ... ... + + Common + + + - + + +- + - - ... ... + ...++ + - TVRGBD000ST24 TVRGBDU868NT24 TVRLGBD000ST24 - + TVRGBD000ST24 TVRGBDU868NT24 TVRLGBD000ST24 Input Output + + - ... ... + TVRGBDSY868SL24 + + - + ... ... ... ... + + + ++-+ - 12-24 Vdc +Power supply Input +... Output ++-+ - - + + - - + - - ... + ... - - + + - + + ... - 12-24 Vdc TVRGBDU868NT24 Power supply - TVRGBD000ST24 + Common + + Input +TVSTRD868NT27 + Output + + +-... + - Slave input - + + - - ... ... TVRGBDMX868DT24 Slave output - TVLRGBD000ST24 - + + - - - - + TVSPOT868ADI04 + - - Slave Output ... TVRGBD000ST24 + + +- + + - ... TVSTRD868NT24 + + - + + + - - - +- +- ... +- - + + TVSTRD868NT27 + + ++-+ - ... + + + + + - TVSTRD868NT27 + + + + - ... ... ... ... - - - + Common ... - + - Pushbutton inpu TVRGBDU868A01/B01 - ...... ...... Slave - Connections - ... TVRGBDMX868DT24 TVRGBD000ST24 - - T3 T2 T1 TVSPOT868AI01/BI01 TVRGBDMX868DT24 TVRGBD000ST24 ... TVRGBDU868DT24 - + - ++ + + TVRGB000M01/N01 TVSPOT868AI01/BI01 TVSPOT868AI01/BI01 + + + / TVRGBDSY868B01 -TVRGBDU868A01 / TVRGBDU868B01 / +TVRGBDSY868A01 TVSPOT868ADI04 + 12/24 Vdc power supply + + Input + + + + Output - + + - ... ... - ... - - + ... +- - + ... + + ... + + + - + - - + TVSTRD868NT24 + - - + + - RGB ... - - + - - + TVSTRD868NT24 + + + - + - + - - TVRGBDU868A01/B01 - - + + - TVSPOT868ADI04 +- - ... + + - + - ... ... - - + + - + + - - Input Output 12-24/48 Vdc power supply ... ... TVRGBDMX868DT24 + ... + Com. +- Synchronized control of outputs TVSPOT868AI01/BI01 TVSPOT868AI01/BI01 TVLRGBW000ST25 TVLRGBW000ST25 + + ...... - ... - + + - TVRGBDU868DT24 TVRGBDMX868DT24 + - + + ... TVSTRD868DI24G TVRGBDU868DT24 TVSPOT868AI01/BI01 - - - + ... + +- -- + + +- - ... -TVLSRGBWU868ST25 - + +TVLSRGBWU868ST25 +- - + - - + + + - + - - - + Slave Output - ... + - + + - + - - + + - TVRGBDU868A01/B01 ... BUS - ... + + Pushbutton input + + - + or 1-10V input - Antenna ... ... ... ++ + + - ... - + + + - ... + Pulsanti manuali - TVSRGBWU868ST25 + -TVSRGBWU868ST25 + TVSTRDW868ST24 +- - + G . ... ... - - C T2 T3 T4 Pushbutton - + + - ... Pulsanti manuali TVRGBW000ST25 TVRGBW000ST25 - T3 T2 T1 ... ... - T3 T2 + + + +- ... ... ... T3 T2 TVSTRDW868ST24 + + Common - Common ... + + + Input - + + Output - - ...... TVSPOT868ADI04 TVSPOT868AI01/BI01 24 Vdc Power supply Input +Output +- - + + - - TVSPOT868ADI04 ... + Common + + TVSTRDW868ST24 + + + + - TVLSTRD868SI24G + 1-COLOUR ... 12-24 Vdc Power supply + + - TVSPOT868AI01 / TVSPOT868BI01 -- - + + - - ... TVLRGBDU868ST24 TVLRGBDU868ST24 12-24 Vdc Power supply Input +Output +- ++ + +- - TVLSTRD868SI24G...... TVLSRGBWU868ST25 - + 1-COLOUR ++ ... - TVRGBDSY868SL24 TVRGBDSY868SL24 + - - + + - ... RBGW - -+ + + + + TVSRGBWU868ST25 ... ... -- TVSTRD868SI24G + TVLSTRD868SI24GTVRGBDU868ST24 TVRGBDU868ST24 TVSTRDW868ST24 TVSTRDW868ST24 - + - + + - ... RBGW + ...... - + + - -- + + + + - +- TVSPOT868AI01/BI01 ... + + - - + Dimmer - 350/700 mA Constant current LED - Connections - ... + + + + + +- - - ++ + +- - - + ++ ... - + ... + + - ... ... Dimmer - 12/24 Vdc Constant voltage LED - Connections + + - ... + + TVRLGBD000ST24 TVRLGBD000ST24 TVRGBDU868NT24 TVRGBDU868NT24 + + + - ... + + +- -+ ++- + -+ - ... - - 6-WIRE CONNECTION - + +- TVRGB000M01/N01 TVRGB000M01/N01 4-WIRE- CONNECTION - ... +- +- +- - + - + + 6-WIRE CONNECTION ... ... TVRGBDSY000M01/N01 TVRGBDMX868AD02 TVRGBDMX868AD02 ... - - + + ... .-.. + 27 +- Control system for incandescent, halogen and 230 Vac LED lights Control system for incandescent, halogen and 230 Vac LED lights Teleco Automation develops state-of-the-art technologies for light control irrespective of the type of light. The light intensity of lighting can be dimmed or increased to create the atmosphere you want in the environment, while also reducing energy consumption. 28 29 Control system for incandescent, halogen and 230 Vac LED lights TVDMM868G08S TVDMM868A01S TVDMM868A01SP wall-mounted • • • • • • • • • • • • • • • • • • • • • • • • • • Type of load Resistive (R) TVDMM868A05 (Page 32) TVDMC868BB02 TVDMM868G09S (Page 32) TVDMC868BB01 false ceiling TVDMM868A05 TVDLC868A01 (Page 32) TVDMM868G09S 55mm diameter electrical box TVDLC868A01 RESISTIVE LIGHTS, 230 VAC LED, STANDARD/ELECTRONIC TRANSFORMERS Comparison table Model/Code Receiver selection guide Inductive (L) Capacitive (C) 230 Vac LED Installation TVDMC868BB01 (1 output up to 450W) (Page 33) TVDMC868BB02 (2 outputs up to 250W each) (Page 33) DIN rail • False ceiling 55mm diameter electrical box • • • • Wall-mounted • • • Power supply 230 Vac • • • • • • • • • 1 1 4 1 2 1 1 1 • • • • 110 Vac Outputs RESISTIVE LOAD (R) - Power x output (min.-max) false ceiling TVDMM868G08S (Page 34) RESISTIVE LIGHTS AND STANDARD TRANSFORMERS 25-250W • • 25-450W • 25-500W • 25-1000W DIN rail TVDMM868A01S (Up to 500W) (Page 34) TVDMM868A01SP (Up to 1000W) (Page 34) INDUCTIVE LOAD (L) - Power x output (min.-max) 25-250VA • • • • 25-450VA • 25-500VA • • • • • • 20 20 CAPACITIVE LOAD (C) - Power x output (min.-max) 25-250VA • • • • 25-450VA • 25-500VA LED - Power x output (min.-max) 7-100W • • • • • • • Wired inputs 1 (n.o.) • • 2 (n.o.) • 4 (n.o.) Compatible with Green Mouse DIMMER • • • 20 54 20 • IP 30 20 20 20 31 Control system for incandescent, halogen and 230 Vac LED lights Dimmer - Resistive lights, 230 Vac LED, standard / electronic transformers DLC - 1 output up to 250W(VA) 230 Vac dimmer with built-in radio receiver for the control of resistive, inductive, capacitive loads and LED up to 250W(VA). Ideal for wall shunt boxes of 55 mm diameter. Compatible with Green Mouse, for automatic room brightness control. • Possible to conﬁgure the type of load • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Pushbutton input for manual controls • 100% protected against short circuits • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 16 transmitters • Supplied with stabilising circuit to be connected in parallel for greater load stability TECHNICAL SPECIFICATIONS: Power supply: 230 Vac, 50/60Hz Adjustable load (Min.-Max.): - resistive loads (R): 25W-250W - inductive and capacitive loads (L,C): 25VA-250VA - LED lamps: 7W-100W Protection rating: IP20 Dimensions: 50 x 50 x 25 mm Code: TVDLC868A01 Without built-in radio receiver Code: TVDLC000A01 DMC - 1 output up to 450W(VA) 230 Vac dimmer with built-in radio receiver, pushbuttons UP/DOWN and OFF and 1 output for the control of loads up to 450W(VA). It is ideal for wall-mounted installation. • Automatic conﬁguration of type of load • Manual selection of the LED mode • Replaces existing switches with no need for extra wiring • 100% protected against short circuits • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 16 transmitters Interchangeable frames available on request: POLY GLASS (transparent polycarbonate) SPLIPQ3B7T SPLIPQ3N7T IRON (steel) SPLIMQ3S7 GLASS (glass) SPLIVQ3B7 SPLIVQ3N7 Power supply: 230 Vac, 50/60Hz Adjustable load (Min.-Max.): - resistive loads (R): 25W-450W - inductive and capacitive loads (L,C): 25VA-450VA - LED: 7-100W Protection rating: IP20 Dimensions: 86 x 86 x 36 mm Code: TVDMC868BB01 Available in black Code: TVDMC868NN01 Without built-in radio receiver Code: TVDMC000BB01 In black without built-in radio receiver Code: TVDMC000NN01 DMM - 4 outputs up to 500W(VA) each DMC - 2 outputs up to 250W(VA) each 230 Vac dimmer with built-in radio receiver and 4 outputs up to 500W(VA) for the control of resistive, inductive, capacitive loads and LED. It is ideal for wall-mounted installation. Compatible with Green Mouse, for automatic room brightness control. 230 Vac dimmer with built-in radio receiver, pushbuttons UP/DOWN and OFF and 2 outputs for the control of loads up to 250W (450W or 450VA in total). It is ideal for wall-mounted installation. • Automatic or manual conﬁguration of type of load • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes (for each output or group) • Mains or low voltage manual pushbutton inputs • 100% protected against short circuits • Controlled by wireless movement sensors • Timed load switching off (from 15 seconds to 20 minutes) • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 64 transmitters TECHNICAL SPECIFICATIONS: Power supply: 110/230 Vac, 50/60Hz Adjustable load (Min.-Max.): - resistive loads (R): 25W-500W (230 Vac) 12W-250W (110 Vac) - inductive/capacitive (L,C): 25VA-500VA (230 Vac) 12VA-250 W (110 Vac) - LED lamps: 7W-100W (230 Vac) 4W-50 W (110 Vac) Protection rating: IP54 Dimensions: 210 x 240 x 95 mm Code: TVDMM868A05 • Automatic conﬁguration of type of load • Manual selection of the LED mode • Replaces existing switches with no need for extra wiring • 100% protected against short circuits • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 16 transmitters Interchangeable frames available on request: DMM - 1 output up to 250W(VA) 230 Vac dimmer with built-in radio receiver for the control of resistive, inductive, capacitive loads and LED up to 250W(VA). It is ideal for false ceiling. Compatible with Green Mouse, for automatic room brightness control. • Automatic conﬁguration of type of load • Manual selection of the LED mode • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Pushbutton input for manual controls • 100% protected against short circuits • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 16 transmitters 32 TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: POLY GLASS (transparent polycarbonate) SPLIPQ6B8T SPLIPQ6N8T IRON (steel) SPLIMQ6S8 GLASS (glass) SPLIVQ6B8 SPLIVQ6N8 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac, 50/60Hz Adjustable load x output (Min.-Max.): - resistive loads (R): 25W-250W - inductive and capacitive loads (L,C): 25VA-250VA - LED: 7-100W Maximum total load (R,L,C): 450W, 450VA Protection rating: IP20 Dimensions: 86 x 86 x 36 mm Code: TVDMC868BB02 Available in black Code: TVDMC868NN02 Without built-in radio receiver Code: TVDMC000BB02 In black without built-in radio receiver Code: TVDMC000NN02 Power supply: 230 Vac, 50/60Hz Adjustable load (Min.-Max.): - resistive loads (R): 25W-250W - inductive and capacitive loads (L,C): 25VA-250VA - LED lamps: 7W-100W Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVDMM868G09S 33 Control system for incandescent, halogen and 230 Vac LED lights TRIAC Dimmer - Resistive lights and standard transformers Accessories for incandescent, halogen and 230 Vac LED lights DMM - 1 output up to 500W(VA) TXS - Movement sensor 230 Vac TRIAC (Leading Edge) dimmer with built-in radio receiver for the control of resistive and inductive loads up to 500W(VA). It is ideal for false ceiling. Compatible with Green Mouse, for automatic room brightness control. Wireless IP44 2-channel movement sensor with ON/OFF function. Possible functions: • Light intensity regulation • Activation distance regulation • ON/OFF time adjustment • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Pushbutton input for manual controls • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 16 transmitters TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Adjustable load (Min.-Max.): - resistive loads (R): 25W-500W - inductive loads (L): 25VA-500VA Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVDMM868G08S Protective cover for outdoor spaces TECHNICAL SPECIFICATIONS: Power supply: 6 Vcd (UM-3 AA battery 1.5V x 4) Detecting range: 12m/ 180° ON/OFF time: adjustable from 5 sec. to 5 min. LUX: adjustable from 5 LUX to ∞ Protection rating: IP44 Dimensions: 87 x 125 x 120 mm Code: TVTXS868B02 Protective cover for outdoor spaces Code: TXS-KITD DMM - 1 output up to 500W(VA) TXL - Transmitter for movement sensors 230 Vac TRIAC (Leading Edge) dimmer with built-in radio receiver for the control of resistive and inductive loads up to 500W(VA). It is ideal for DIN rail. Compatible with Green Mouse, for automatic room brightness control. Wireless 230 Vac 2-channel transmitter to connect to movement sensors. It is ideal for 55mm diameter electrical boxes. • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Pushbutton input for manual controls • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) • Possibility to memorize up to 16 transmitters TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Adjustable load (Min.-Max.): - resistive loads (R): 25W-500W - inductive loads (L): 25VA-500VA Protection rating: IP20 Dimensions: 90 x 71 x 60 mm TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Dimensions: 54 x 49 x 25 mm Code: TVTXL868R02 Model for modular 1M box Code: TVTXL868R02F 230 Vac control input Code: TVDMM868A01S txl r02 (F) Up to 1000W Code: TVDMM868A01SP STL - Stabilising circuit Stabilising circuit recommended to keep the light of LED bulbs stable if power drops below the required minimum. To be connected in parallel to the load. Dimensions: 25 x 42 x 22 mm. Code: STL001 1 C 2 57C6 34 35 413C 2 M DLC DLC DLC M M Resistive, 230 Vac LED, standard/electronic transformers - Connections tvrcl868a02f6 230 VAC DIMMER RECEIVER 230 VAC DIMMER RECEIVER TVDLC868A01 TVDMC868BB01 dmm dmm g08s g08s dmm a01 dmm g08s dmm g08s dmm g08s het b01 het a04-a06 L L + - DLC DLCDLC M WITH MECHANICAL PUSHBUTTON CONNECTED TO THE POWER SUPPLY WITH MECHANICAL PUSHBUTTON CONNECTED TO THE LOAD WITHOUT MECHANICAL BUTTON Pushbutton input for manual controls N N L dmm dmm a01 a01 dmm a01 Pushbutton dmm a01a01 dmm input for manual controls mechanical pushbutton N M MM M MM WITHOUT DMC MECHANICAL BUTTON 01 N N L L dmm g09s WITH MECHANICAL PUSHBUTTON CONNECTED TO THE LOAD 230 VAC DIMMER RECEIVER 230 VAC DIMMER RECEIVER DMC 01 TVDMM868A05 TVDMC868BB02 dmm g09s dmm g09s dmm g09s DMC 01 01 DMC M Antenna Low voltage manual pushbutton inputs L L N dmm g08s g08s dmmdmm g08s dmm a01 a01 dmmdmm a01 DMC 02 L. N. L Pushbutton input for manual controls N Pushbutton input for manual controls Pushbutton input for manual controls DMC DMC 02 02 WITH MECHANICAL PUSHBUTTON CONNECTED TO THE LOAD WITHOUTDMC 02 DMC 02 02 DMC MECHANICAL BUTTON Output Output 1 Output Output 2 Output Output 3 Output Output 4 1 2 3 button button button 4 button N Pushbutton input for manual controls Low voltage manual pushbutton inputs WITH MECHANICAL PUSHBUTTON CONNECTED TO THE POWER SUPPLY DMM A05 230 VAC DIMMER RECEIVER DLC TVDMM868G09S + - 230 VAC DIMMER RECEIVER 230 VAC DIMMER RECEIVER DLC TVDMM868G08S TVDMM868A01S / TVDMM868A01SP Pushbutton input for manual Pushbutton controls input for manual controls N L DMC 0101 DMCDMC 01 36 M M dma dma dma dma M dma dma + - M + - dmm g10s dmm g10s dmm g10s dmm g10s + + - - + - + - + - + + -+ - + - dmm dmm g10s g10s OUT 230 Vac Power supply 230 Vac Power supply IN 230 Vac 230 Vac supply Power supply dmm Power g08s dmm g09s dm WITH MECHANICAL PUSHBUTTON CONNECTED TO THE POWER SUPPLY DMC DMC 01 01 vtl a01-a02 M MM Resistive, standard/electronic transformers - Connections dmm g08s mechanical pushbutton M MM dmm g08s Pushbutton input for manual dmm controls a01 dmm a01 dmm g09s g09s dmmdmm g09s DMC bb10 DMC bb10 DMC bb10 DMC bb10 DMC DMC bb1 37 Control system for devices with 0-10V / 1-10V or DALI input Control system for devices with 0-10V / 1-10V or DALI input Low energy consumption in trading/commercial environments or offices thanks to full control of systems with 0-10V/1-10V and DALI input (e.g. lamps and ballast for fluorescent lights). Wireless technology means maximum flexibility as well as saving time and money. 38 39 Control system for devices with 0-10V / 1-10V or DALI input Receiver selection guide Dimmer - Control system with 0-10V/1-10V output CONTROL SYSTEM WITH DALI OUTPUT TVDMA868A01 false ceiling DMM - 0-10V / 1-10V output (For 20 DALI devices) (Page 40) DLC TVDMA868A02 (For 64 DALI devices) (Page 40) CONTROL SYSTEM WITH 0-10V/1-10V OUTPUT false ceiling TVDMM868G10S (Page 41) dmm g08s dmm g08s TVDMC868BB10 (Page 41) wall-mounted dmm g08s • TVDMC868BB10 TVDMA868A02 • TVDMM868G10S TVDMA868A01 Model/Code Comparison table • 0/1-10V • • • • DMC 01DMC 01 • wall-mounted DMC 01 Power supply 230 Vac • • • • • • • • • • • If controlled by a 7-channel transmitter, it isa01 possible pre-set 4 dmmto a01 dmm light scenes • Pushbutton input for manual controls • Relay output for power supply to controlled devices up to 800W • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON anddmm OFF)a01 • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • Pushbutton input for manual controls • Relay output for power supply to controlled devices up to 800W • Light memory function (it memorises the light level of the last time it was switched on) • Fade function (gradual light ON and OFF) Relay output (potential free contact) Compatible with Green Mouse DIMMER • • • 20 20 20 Power supply: 230 Vac Maximum power applicableM at relay output: 800W M Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVDMM868G10S Power supply: 230 Vac Maximum power applicable at relay output: 800W Protection rating: IP20 Dimensions: 86 x 86 x 36 mm d dmm g09 Code: TVDMC868BB10 Available in black Code: TVDMC868NN10 dmm g09s Interchangeable frames available on request: Wired input 1 (n.o.) TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Dimmer 230 Vac with built-in radio receiver and UP/DOWN and OFF buttons to adjust 0-10V devices (e.g. ballast for fluorescent lamps). It is ideal for wall-mounted installation. Installation false ceiling Dimmer 230 Vac with built-in radio receiver to adjust 0-10V/1-10V devices (e.g. ballast for fluorescent lamps). It is ideal for false ceiling. Compatible with Green Mouse, for automatic room brightness control. DMC - 0-10V output Ouput DALI M M DLC DLC POLY GLASS (transparent polycarbonate) SPLIPQ3B7T SPLIPQ3N7T IRON (steel) SPLIMQ3S7 GLASS (glass) SPLIVQ3B7 SPLIVQ3N7 IP 20 Dimmer - Control system with DALI output DMA - DALI output 230 Vac dimmer with built-in radio receiver and DALI output for control ballasts and lamps. It is ideal for false ceiling. Compatible with Green Mouse, for automatic room brightness control. • If controlled by a 7-channel transmitter, it is possible to pre-set 4 light scenes • 1 DALI output • Integrated power supply unit for 20 or 64 DALI devices • Pushbutton input for manual controls • Group (from 1 to 16) or broadcast type ON/OFF/DIMMER controls •Can be integrated into an existing DALI BUS to create groups that can also be controlled via radio 40 Dimmer -DMCControl system with 0-10V/1-10V/DALI output - Connections 02 230 VAC RECEIVER DMCWITH 02 DALI OUTPUT 230 VAC RECEIVER - 0-10V/1-10V OUTPUT 230 VAC RECEIVER - 0-10V/1-10V OUTPUT TVDMA868A01 / TVDMA868A02 TVDMM868G10S TVDMC868BB10 DMC 02 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Protection rating: IP20 Dimensions: 165 x 47 x 35 mm For 20 DALI devices Code: TVDMA868A01 For 64 DALI devices Code: TVDMA868A02 DALI 0/10V 1-10V Output + Button - IN input for manual controls OUT IN dma dma IN dmm g10s OUT Pushbutton 230 Vac input for Power supply manual controls OUT 230 Vac Power supply dma + - + - 0/10V 1-10V Output Pushbutton input for manual controls + - + Relay free contact output + - N L 230 Vac Power supply dmm g10s dmm g10s DMC bb10 41 ON/OFF control for indoor lights and loads ON/OFF control for indoor lights and loads Manage the switching on and off of electrical loads in the dwelling in an intelligent way to optimise consumption and prevent overload. A single wireless solution for easy control all electrical loads in the home from a single control unit. 42 43 ON/OFF control for indoor lights and loads (4 relay output) (Page 46) • • Installation DIN rail • • False ceiling • 55mm diameter electrical box 55mm diameter electrical box TVRRL868G02P (Impulsive or ON/OFF functions) (Page 46) ON/OFF INDOOR LIGHTS AND LOADS TVRRL868GS02 TVRCD868A04N Potential free contact output TVPRSD868A02 (Page 46) TVRGL868A02 (1 output) TVRRL868G02P MASTER + SLAVE Model/Code TVRCD868A01 DIN rail TVRCD868A04N Comparison table TVRCD868A01 Receiver selection guide • Power supply 230 Vac • • • • • • 1 4 1 2 4 1 • • • • • • Number of outputs Ouput 230 Vac Potential free Maximum power x output • 1000W TVRGL868A02 (Page 47) false ceiling 2000W • DIN rail MASTER + SLAVE TVPRSD868A02 (Also suitable for tubular motors ) (Page 47) • TVRRL868GS02 (Pushbutton input for manual controls) (Page 47) • Wired input 1 Functions • • • ON/OFF • • • Timer controlled up to 9 hours • Impulsive 55mm diameter electrical box • 2000W (Maximum total 4000W) 3000W 230 Vac output • • • • • Slave • • 20 20 • IP 44 20 20 20 20 45 ON/OFF control for indoor lights and loads ON/OFF - 230 Vac indoor lights and loads potential free contact RCD - 1 timed output up to 2000W 230 Vac ON/OFF receiver with 1 timed output (potential free contact) for loads up to 2000W (resistive). It is ideal for DIN rail. • Programmable functions: impulsive, ON/OFF and timer controlled up to 9 hours • SLAVE devices may be connected without radio receiver to increase the number of controlled outputs • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 2000W Protection rating: IP20 Dimensions: 90 x 36 x 61 mm ON/OFF - 230 Vac indoor lights and loads RGL - 2 outputs up to 1000W each 230 Vac ON/OFF receiver with 2 outputs for loads up to 1000W each (resistive). It is ideal for false ceiling. • ON/OFF function • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 1000 W (x output) Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVRGL868A02 Code: TVRCD868A01 SLAVE without receiver with 4 relay outputs Code: TVRCD868M04 RCD - 4 relay outputs up to 3000W each PRSD - 4 outputs for lights and motors 230 Vac ON/OFF receiver with 4 relay outputs (potential free contact) for loads up to 3000W each (resistive). It is ideal for DIN rail. 230 Vac receiver with 4 outputs, protected by fuse for the control of resistive loads up to 4000W or 2 tubular motors up to 400W. It is ideal for DIN rail. • Programmable functions: impulsive and ON/OFF • SLAVE devices may be connected without radio receiver (max 5) to increase the number of controlled outputs • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 3000W (x output) Protection rating: IP20 Dimensions: 90 x 87 x 60 mm Code: TVRCD868A04N SLAVE without receiver with 4 relay outputs Code: TVRCD868M04 • Pulse and ON/OFF function in load control mode • OPEN - STOP - CLOSE commands in motor control mode • Single or group commands are possible • SLAVE devices may be connected without radio receiver (max 5) to increase the number of controlled outputs • Possibility to memorize up to 42 transmitters TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 2000W (x output)* Max. power for tubular motors: 400W (x output) Protection rating: IP20 Dimensions: 105 x 90 x 60 mm Code: TVPRSD868A02 SLAVE without receiver with 4 230 Vac outputs Code: TVPRSD000M02 (*) The provided fuse (5A) may need replacing. The sum of the 4 connected loads must not exceed 4000W. RRL - 1 relay output up to 1000W 230 Vac ON/OFF receiver with 1 relay output (potential free contact) for loads up to 1000W (resistive). Ideal for wall shunt boxes of 55 mm diameter. Compatible with Green Mouse ON/OFF, for automatic room brightness control. • Impulsive and ON/OFF functions • 1 relay output (potential free contact) 46 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 1000W Protection rating: IP20 Dimensions: 54 x 49 x 25 mm Code: TVRRL868G02P RRL - 1 relay output up to 1000W 230 Vac receiver with 1 relay output for loads up to 1000W (resistive). Ideal for wall shunt boxes of 55 mm diameter. Compatible with Green Mouse ON/OFF, for automatic room brightness control. • ON/OFF function • 1 relay output • Can be connected in series to an existing two-way switch TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 1000W Protection rating: IP20 Dimensions: 54 x 49 x 25 mm Code: TVRRL868GS02 47 230 Vac indoor lights and loads - Connections 230 Vac indoor lights / loads potential free contact - Connections 230 VAC RECEIVER TVRCD868A01 Antenna 230 VAC RECEIVER - 2 OUTPUTS MM MM tvrpl868a01e/a02e TVRGL868A02 RCD A01A01 RCD rrl g02p rrl g02p MM rrl gs02 SLAVE Output (max. 5 slave) RCD A01 RCD A01 rrl rrl g02p g02p M M OUTPUT 1 OUT RCD A01 RCD A01 IN rrl g02p rrl g02p M M RCD M04N RCD M04N RCD A04N RCD A04N 230 Vac Power supply NC C NA 230 Vac Power supply RCD A01 g02p rrl rrl g02p SLAVE Output prsdprsd OUTPUT TVPRSD868A02 TVRCD868M04 SLAVE Output (max. 5 slave) Antenna 1 2 RCD M04N RCD A04N RCD A04N 4 230 Vac Power supply OUTPUT MM MM 1 2 RCD A04N RCD A04N OUTPUT 3 RCD M04N RCD M04N 230 Vac resistive load controlled by 1 two-way switch Example of connection M prsd slave L N tvrpl868a01e/a02e tvrpl868a01e/a02e 230 Vac rrl g02p rrl g02pPower supply MM 48 prsd prsd 230 Vac Power supply N L N L M RCDRCD A04N A04N MM M M RCDRCD A01 A01 M 2 L N N L Output Output 3 4 SLAVE Output (max. 5 slave) prsd slave prsd slave RCD M04N RCD M04N L N N L 1 2 SLAVE Output L N N L Output Output 3 4 prsd slave prsd slave Output Output prsd slave prsd slave SLAVE Output Antenna SLAVE Input MM N L M M 230 Vac Power supply prsd prsd prsd prsd MM 230 Vac Power supply SLAVE Input TVPRSD000M02 MM rrl gs02 rrl gs02 rgl rgl 1 Antenna RCD M04N RCD M04N prsd prsd Output Output 230 Vac resistive load controlled by 2 two-way switches Example of connection 230 Vac Power supply prsd slave prsd slave L N 230 Vac Power supply N L SLAVE Output (max. 5 slave) TVPRSD868A02 M prsd prsd L N M04N RCD M04N TVPRSD000M02RCD prsd 230 VAC RECEIVER - 4 prsd OUTPUTS FOR 2 400W MOTORS - MASTER AND SLAVE TVRRL868GS02 prsdprsd slave slave 230 Vac resistive load Example of connection Relay output 230 Vac Power supply 230 Vac Power supply 4 MM M 230 VAC M RECEIVER TVRRL868G02P prsdprsd RCD A04N RCD A04N MM prsdprsd slave slave OUTPUT 3 230 VAC RECEIVER SLAVE Input rgl 230 VAC RECEIVER - 4 OUTPUTS FOR 230 VAC LOADS - MASTER AND SLAVE RCD A01 RCD A01 TVRCD868A04N OUTPUT 2 MM MM 230 VAC RECEIVER - MASTER AND SLAVE M Motor 1 M M MM Motor 2 M M MM MM 230 Vac Power supply prsd slave prsd slave M M Motor 1 M M Motor 2 prsd slave prsd slave MM 49 M ON/OFF control for outdoor lights and loads ON/OFF control for outdoor lights and loads Gone are the days of having to switch the lights, the garden irrigation or the swimming-pool water recycle on and off manually. It is truly simple to programme different scenes and recreate them with absolute precision when desired. 50 51 ON/OFF control for outdoor lights and loads Receiver selection guide Potential free contact RCL - 2 outputs up to 3000W each TVRCL868A02 (Page 52) 230 Vac ON/OFF receiver with 2 outputs for loads up to 3000W each (resistive) - 1500W each output at 110Vac. 2 OUTPUTS 230 VAC OUTDOOR LIGHTS AND LOADS • Programmable relay functions: impulsive, ON/OFF and timer controlled up to 9 hours • Independent or synchronised activation of relays that can be controlled from a single transmitter • Possibility to memorize up to 42 transmitters TVRCL868A02F6 (Page 53) 3000W x output TVRCL868A60 (Page 53) 4 OUTPUTS TVRCL868A60 TVRCL868A02F6 Model/Code TVRCL868A02 • • Independent timer for each relay (from 5 seconds to 15 minutes) • Programmable relay functions: impulsive, ON/OFF and timer • Independent or synchronised activation of relays that can be controlled from a single transmitter • Possibility to memorize up to 42 transmitters • • Number of output 2 2 4 • • Output 230 Vac Potential free • Maximum power x output 2000W (Maximum total 4000W) Code: TVRCL868A02F6 230 Vac ON/OFF receiver with 4 outputs, protected by fuse for the control of resistive loads up to 4000W in total. It is ideal for outdoor lights and loads. Power supply 230 Vac • Power supply: 110/230 Vac 50/60Hz Maximum power (R): 3000W a 230 Vac (x output) 1500W a 110 Vac (x output) Protection rating: IP54 Dimensions: 205 x 145 x 85 mm RCL - 4 outputs up to 4000W in total Comparison table 110/230 Vac 50/60Hz TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 2000W (x output)* Maximum power in total: 4000W Protection rating: IP54 Dimensions: 180 x 200 x 79 mm (*) The provided fuse (5A) may need replacing. The sum of the 4 connected loads must not exceed 4000W. M MCode: TVRCL868A60 ON/OFF -rclOutdoor lights and loads - Connections a60 RECEIVER WITH 2 16A RELAY OUTPUTS RECEIVER WITH 2 OUTPUTS / 3000W EACH TVDMA868A01 / TVDMA868A02 TVRCL868A02F6 • • 3000W Functions Impulsive ON/OFF Timer • • • • • • • • • IP 54 54 54 230 Vac Power supply Output 1 110/230 Vac Power supply Output 2 Antenna rcl g02 Output 1 Output 2 tvrcl868a02f6 ON/OFF - Outdoor lights and loads RCL – 2 16A relay outputs 230 Vac ON/OFF receiver with 2 16A relay outputs for loads up to 2000W each (resistive). It is ideal for outdoor lights and loads. • 2 relay outputs (potential-free contact) • Programmable relay functions: impulsive, ON/OFF and timer controlled up to 9 hours • Independent or synchronised activation of relays that can be controlled from a single transmitter • Timer switched off every time an OFF command is received • 1 output with fuse • Possibility to memorize up to 42 transmitters 52 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 2000W (x output) Protection rating: IP54 Dimensions: 137 x 96 x 46 mm Antenna tvrcl868a02f6 RECEIVER WITH 4 OUTPUTS / 2000W EACH TVRCL868A60 1 Code: TVRCL868A02 230 Vac Power supply 2 3 4 M L N L N L N L N OUTPUTS (max 4000W) Antenna M het b01 rcl a60 het a04-a06 53 Control system for resistive or infrared heaters Control system for resistive or infrared heaters Intelligently managed heat. Wireless solutions for controlling any type of resistive or infrared heater. Movement sensors complete the automation system, activating timed switching on or off of the system according to need. 54 55 Control system for resistive or infrared heaters ON/OFF - Resistive or infrared heaters RCL - 2 outputs 3000W each Receiver selection guide 110/230 Vac receiver for the ON/OFF control of resistive and infrared heaters up to 3000W each output (1500W each output at 110Vac). ON / OFF UP TO 3000W X 2 OUTPUTS TVRCL868A02F6 (Page 57) • 2 outputs • Programmable relay functions: impulsive, ON/OFF and timer controlled up to 9 hours • Independent or synchronised activation of relays that can be controlled from a single transmitter •Possibility to memorize up to 42 transmitters RESISTIVE OR INFRARED HEATERS TVHET868B01 (Page 57) 4 PRE-SET LEVELS UP TO 2000W DIMMER TECHNICAL SPECIFICATIONS: Power supply: 110/230 Vac 50/60Hz Maximum resistive load: 3000W / 230 Vac (x output) 1500W / 110 Vac (x output) Protection rating: IP54 Dimensions: 205 x 145 x 85 mm Code: TVRCL868A02F6 TVHET868A06 (Page 57) FROM 0% TO 100% UP TO 6500W TVHET868A04 (Up to 4000W) (Page 57) Dimmer - Resistive or infrared heaters Comparison table TVRCL868A02F6 TVHET868B01 TVHET868A04 TVHET868A06 Model/Code HET - 1 output up to 2000W ON/OFF 4 pre-set levels 0-100%DIMMER 0-100%DIMMER 230 Vac receiver with dimmer function for resistive and infrared heaters up to 2000W. • Dimmer function: 4 pre-set levels (100% - 66% - 50% - OFF) • Remote control with wireless transmitters and sensors • Pushbutton input for manual controls TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum total load: 2000W Protection rating: IP54 Dimensions: 143 x 140 x 55 mm Function Code: TVHET868B01 Power supply 110Vac • • • 230 Vac • • • • 2 1 1 1 Number of output 110/230 Vac receiver with dimmer function for resistive and infrared heaters up to 4000W. Control one 4000W heater or two 2000W heaters (230 Vac). Control one 2000W heater or two 1000W heaters (110Vac). Output power (230 Vac) • 2000W 3000W • • 4000W • 6500W Pushbutton input for manual controls • • • • • • • 54 54 Temperature probe input PIR input IP 54 56 54 HET - output up to 4000/6500W • ON/OFF and dimmer function • Pushbutton input for manual controls • Controlled by wireless or wired movement sensors • Automatic room temperature control through wired external sensor (OPTIONAL) • Soft start: gradual start for longer life of the infrared heaters TECHNICAL SPECIFICATIONS: Power supply: 110/230 Vac 50/60Hz Maximum total load: 4000W (230 Vac) 2000W (110 Vac) Protection rating: IP54 Dimensions: 195 x 200 x 75 mm Code: TVHET868A04 Up to 6500W Code: TVHET868A06 Available also the version up to 6500W. Control one 6500W heater or two 3200W heaters (230 Vac). Control one 3400W heater or two 1700W heaters (110Vac). 57 Accessories for resistive and infrared heaters Receiver for resistive and infrared heaters - Connections TMP - Temperature sensor Temperature sensor (NTC 10K/3435K) to be combined with the TVHET868A04 and TVHET868A06 receivers for automatic room temperature control. Protection rating: IP67. Cable: 150cm Code: TMP150 tvrcl868a02f6 ON/OFF RECEIVER RECEIVER - 4 PRE-SET LEVELS TVRCL868A02F6 TVHET868B01 Antenna 230 Vac 230 Vac Input Output TXL - Transmitter for movement sensors Wireless 230 Vac 2-channel transmitter to connect to movement sensors. It is ideal for 55mm diameter electrical boxes. 110/230 Vac Power supply TECHNICAL SPECIFICATIONS: Output L1 Output L2 tvrcl868a02f6 Antenna Power supply: 230 Vac Dimensions: 54 x 49 x 25 mm tvrcl868a02f6 Pushbutton input for manual controls M M M M het b01 Code: TVTXL868R02 230 Vac control input M het a04-a06 Model for modular 1M box Code: TVTXL868R02F RECEIVER - 0-100% DIMMER + - TVHET868A06 / TVHET868A04 txl r02 (F) M + LED - LED TXS - Movement sensor 2 channel wireless movement sensor with ON/OFF function (IP44). Possible functions: • Light intensity adjustment • Activation distance adjustment • ON/OFF time adjustment het b01 TECHNICAL SPECIFICATIONS: 110/230 Vac Power supply Power supply: 6 Vcd (UM-3het AA b01 battery 1.5V x 4) Detecting range: 12m/ 180° ON/OFF time: adjustable from 5 sec. to 5 min. LUX: adjustable from 5 LUX to ∞ Protection rating: IP44 Dimensions: 87 x 125 x 120 mm Output het a04-a06 + - 1 C 2 Protective cover for outdoor spaces vtl a01-a02 Pushbutton input with LED indicator Temperature probe het a04-a06 Pushbutton input for manual controls and PIR M Code: TVTXS868B02 + - Protective cover for outdoor spaces Code: TXS-KITD M vtl a01-a02 57C6 ON OFF vtl a01-a02 DMM A05 413C 2 TXS - Movement sensor: wireless movement sensor with ON/OFF function compatible with TVHET868A04 and TVHET868A06 receivers. DMM A05 58 59 Control system for ventilation and extraction Control system for ventilation and extraction Wireless management of ventilation and extraction systems offers real savings in energy consumption as well as constant quality of the air in residential, commercial and industrial environments. Movement sensors complete the automation system, activating timed switching ON or OFF of the system according to need. 60 61 Control system for ventilation and extraction Dimmer - Ventilation and extraction VTL - 1 output up to 400W Receiver selection guide 230 Vac radio receiver for the control of fans up to 400W. Ideal for industrial and home ventilation, for kitchens, fireplaces, etc. 1 OUTPUT TVVTL868A02 (Page 63) UP TO 400W • 1-10V input • Input with 2 pushbuttons to “force” the speed by 50% or 100% • 1 relay output (potential free contact) to warn of load activation (max 5A) VENTILATION AND EXTRACTION DMM - 4 outputs up to 500W 4 OUTPUTS 110/230 Vac radio receiver with 4 outputs for the control of fans up to 500W. TVDMM868A05 (Page 63) UP TO 500W X OUTPUT • Mains or low voltage manual pushbutton inputs tvrcl868a02f6• Controlled by wireless movement sensors • Timed load switching off (from 15 seconds to 20 minutes) tvrcl868a02f6 Comparison table TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Minimum adjustable load: 25W Maximum adjustable load: 400W Protection rating: IP20 Dimensions: 165 x 47 x 35 mm Code: TVVTL868A02 TECHNICAL SPECIFICATIONS: Power supply: 110/230 Vac 50/60Hz Minimum adjustable load: 25W (x output) / 230 Vac 12W (x output) / 110 Vac Maximum adjustable load: 500W (x output) 250W (x output) / 110 Vac Protection rating: IP54 Dimensions: 210 x 240 x 95 mm M M Code: TVDMM868A05 TXL - Transmitter for movement sensors TVDMM868A05 TVVTL868A02 Model/Code Accessories for ventilation and extraction 230 Vac 2 channel radio transmitter for movement sensors. Ideal for wall shunt boxes of 55 mm diameter. het b01 Power supply 230 Vac • 1 txl r02 (F) M het b01 • • 500W Relay output • Pushbutton input for manual controls • Forced command n.o. input (50%, 100%) Dimmer - Ventilation and extraction - Connections vtl a01-a02 230 VAC RECEIVER - 1 OUTPUT 110/230 VAC RECEIVER - 4 OUTPUTS TVVTL868A02 TVDMM868A05 1-10V input 1 C 2 + - • 1-10V input Pushbutton input for manual controls het a04-a06 Antenna 54 Relay output 57C6 Low voltage manual pushbutton inputs Low voltage manual pushbutton inputs M • IP 20 Model for modular 1M box Code: TVTXL868R02F + - 4 Maximum power x output (230 Vac) 400W het a04-a06 • Number of outputs Power supply: 230 Vac Dimensions: 54 x 49 x 25 mm Code: TVTXL868R02 230 Vac control input • 110 Vac TECHNICAL SPECIFICATIONS: 230 Vac Power supply L. N. vtl a01-a02 Output Button Output Button Output Button Output Button 1 output 1 2 output 2 3 output 3 4 output 4 DMM A05 62 63 413C 2 M Wireless and GSM control of automated systems Wireless and GSM control of automated systems Ranging from the simple wireless control of a domestic gate to access control of large residential complexes. By using a GSM receiver, you have the option of controlling the automation not only by transmitters, but also through a quick call or SMS from your phone. 64 65 Wireless and GSM control of automated systems • • GSM800 2 outputs inputs: temperature probes wired alarms GSM receiver TVGSM200 (Page 68) GSM700 2 outputs with radio receiver TVGSM000 IP54 Box TVGSM200 GSM receiver - Comparison table Model/Code Receiver selection guide • • • • 1 2 Type of receiver TVGSM000 (Page 68) IP54 Box DIN rail Power supply DIN rail • 12 Vdc 1 output GSM700 (Page 69) • 230 Vac Number of outputs 2 2 outputs inputs: manual pushbuttons CONTROL OF AUTOMATED SYSTEMS GSM800 (Page 69) 2 Built-in radio receiver • RS232 • TVRCE868A01 IP54 Box 4 outputs • • (Up to 42 transmitters) (Page 70) Input for connecting wired alarms • TVRCV868A01 (230 Vac) (Page 70) Radio receiver • Input for temperature sensors Pushbutton for manual controls • IP TVRCM868A02 54 (Up to 42 transmitters) (Page 70) TVRCM868A2000 54 20 Radio receiver - Comparison table TVRCM868A02 TVRCM868A2000 TVRPL868A01P (Page 71) TVRCV868A01 1 output TVRCE868A01 plug-in Model/Code (Up to 2000 transmitters) (Page 70) 20 • • • • TVRPL868A01P 2 outputs Type of receiver IP54 box • plug-in Power supply 12/24 Vac/dc • • • • 230 Vac • Number of outputs 4 4 2 • • • 2 1 Storage capacity Up to 42 transmitters • Up to 61 transmitters • Up to 2000 transmitters IP 54 66 54 54 54 20 67 Wireless and GSM control of automated systems GSM receiver for control of automated systems GSM - With radio receiver Radio and GSM receiver for the independent control of two relay contacts (N.O. or N.C., 5A) with no potential. • Power supply 12 Vdc with possibility of connecting a buffer battery • Built-in radio receiver with memory up to 100 transmitters • PC software for system programming and management • Programmable modes of output activation through SMS and software ON/OFF, pulse, timed (from 0 to 9999 sec.) • The unit can memorise up to 300 phone numbers, from which you call to activate output 1 TECHNICAL SPECIFICATIONS: Power supply: 12 Vdc GSM: Quad-band Protection rating: IP54 Dimensions: 137 x 96 x 46 mm Code: TVGSM200 GSM receiver for warnings and the independent control of two relay contacts (N.O. or N.C., 5A) with no potential. • Power supply 12V dc with possibility of connecting a buffer battery • 2 inputs (N.O. or N.C.) for connecting wired alarms • 2 inputs for temperature sensors • PC software for system programming and management. • Programmable modes of output activation through SMS and software ON/OFF, pulse, timed (from 0 to 9999 sec.) • The unit can memorise up to 300 phone numbers, from which you call to activate output 1 • When an alarm is received, warning calls and SMS are sent to the numbers in ‘contacts’ (max. 8) • Possibility of receiving an automatic SMS with temperature values when a set minimum or maximum value is exceeded (temperature thresholds) GSM receiver for the independent control of 2 relay contacts (N.O. or N.C., 5A) with no potential. • 1 output, without inputs • PC software for system programming and management • Programmable modes of output activation through SMS and software ON/OFF, pulse, timed (from 0 to 9999 sec.) • The unit can memorise up to 300 phone numbers, from which you call to activate output 1 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac GSM: Quad-band Protection rating: IP20 Dimensions: 90 x 71 x 60 mm Code: GSM700 2 outputs and 2 pushbutton inputs for manual controls Code: GSM800 GSM Call • Wake-up of output 1 and sending, if the function is enabled, of warning calls and SMS to the numbers in ‘contacts’ (max. 8) With SMS (password protected) • Remote output activation/deactivation and status request • Insertion/cancellation of enabled telephone numbers and transmitters With PC software • Insertion/cancellation of enabled telephone numbers with possibility of associating user names and saving the complete list • Management and backup of more than one installation • Function test With radio transmitter • Independent output activation GSM Call • Wake-up of output 1 and sending, if the function is enabled, of warning calls and SMS to the numbers in ‘contacts’ (max. 8) With SMS (password protected) • Remote output activation/deactivation and status request • Insertion/cancellation of enabled telephone numbers and transmitters With PC software • Insertion/cancellation of enabled telephone numbers with possibility of associating user names and saving the complete list • Management and backup of more than one installation • Function test GSM - Alarm management GSM - DIN rail TECHNICAL SPECIFICATIONS: Power supply: 12 Vdc GSM: Quad-band Protection rating: IP54 Dimensions: 137 x 96 x 46 mm Thanks to the GSM receiver, remote communication with your automated systems is also possible via SMS or telephone call. Just a simple touch from any telephone and you can check the status and activate or deactivate the automation. Code: TVGSM000 GSM Call • Wake-up of output 1 and sending, if the function is enabled, of warning calls and SMS to the numbers in ‘contacts’ (max. 8) With SMS (password protected) • Remote output activation/deactivation and status request • Input enable/disable and status request • Insertion/cancellation of enabled telephone numbers • Activation/deactivation and setting of temperature thresholds With PC software • Input setting (type, enable and activation times) • Insertion/cancellation of enabled telephone numbers with possibility of associating user names and saving the complete list • Management and backup of more than one installation • Function test 68 69 Wireless and GSM control of automated systems Radio receiver for control of automated systems RPL 230 Vac plug-in receiver with 1m cable to be connected to the control input of door automations. Ideal for making existing automated devices compatible with Teleco transmitters. RCE - 4 outputs with selectable modes 12/24 Vac/dc radio receiver with 4 wireless outputs for controlling automated devices, set up for insertion of 4 pulse/ON-OFF MC0001 or timed MCTIM channel modules. 1 pulse/ON-OFF channel module provided. OPTIONAL: MC001 Pulse channel module. TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vac/dc Maximum commutable power at the relay: 1A Protection rating: IP54 Dimensions: 137 x 96 x 46 mm Power supply: 230 Vac Maximum load through the plug: 5A/250 Vac Maximum resistive load at the relay contact: 1A/48 Vac Protection rating: IP20 Dimensions: 95 x 55 x 55 mm Code: TVRPL868A01P Code: TVRCE868A01 230 Vac model Code: TVRCV868A01 MCTIM Timed channel module. M GSM 000-100 RCM - 2 impulsive outputs 12/24 Vac/dc radio receiver with 2 potential free outputs for controlling automated devices in compact container. • Can manage up to 42 transmitters • Executes pulse function TECHNICAL SPECIFICATIONS: GSM 000-100 Power supply: 12/24 Vac/dc Maximum commutable power at the relay: 1A Protection rating: IP54 Dimensions: 60 x 90 x 26 mm M M Wireless and GSM control of automated systems - Connections GSM 000-100 12 VDC GSM RECEIVER Code: TVRCM868A02 GSM 000-100 230 VAC GSM RECEIVER MGSM700 / GSM800 M TVGSM000 / TVGSM200 RS232 Input 200 12/24 VAC/DC RADIO GSM RECEIVER Power supply 230 Vac TVRCE868A01 NA C NC* NC C NA GSM din basic GSM 200 GSM 200 GSM 000-100 Antenna GSM Probe 1* Probe 2* NA NC COM NA NC COM Output 2 Output 1 Antenna RCM - 2000 Codes GSM 200 * TVGSM000 model 12/24 Vac/dc radio receiver with 2 potential free outputs for controlling automated devices in compact container. • Can manage up to 2000 transmitters • Executes pulse function TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vac/dc Maximum commutable power at the relay: 1A Protection rating: IP54 Dimensions: 118 x 52 x 25 mm tvrce868a01 TVRCV868A01 Antenna GSM din adv 12/24 VAC/DC RADIO RECEIVER 230 VAC RADIOtvrcv868a01 RECEIVER TVRCM868A02 / TVRCM868A2000 TVRPL868A01P tvrce868a01 tvrcm868a02-2000 Code: TVRCM868A2000 tvrcv868a01 Relay contact tvrce868a01 230 Vac Power supply tvrcv868a01 GSM 200 GSM din basic tvrcm868a02-2000 Outputs 2 Outputs 1 tvrce868a01 2 tvrcv868a01 tvrcm868a02-2000 70 4 * GSM800GSM modeldin adv Inputs for wired alarms* 230 VAC RADIO GSMRECEIVER din basic GSM 200 1 2 3 Outputs 12/24V Power supplytvrce868a01 Pushbutton inputs for manual control* BatteryGSM din basic Power supply GSM 000-100 M M GSM din ad GSM din basic 3 4 1 12/24Vac/Vdc Power supply tvrcm868a02-2000 Antenna GSM din adv 230 Vac socket Antenna tvrpl868a01p 71 tvrpl868a01p Control system for roller shutter doors Control system for roller shutter doors In addition to controlling the door from the wall-mounted or portable transmitter, any mobile phone can be used to control door status, open/close, obtain error messages and receive a maintenance alert. Maximum safety is guaranteed by an obstacle detection system and if there is an attempt at forcing the door, the relative system will send an alarm signal. 72 73 Control system for roller shutter doors 230 Vac control unit for roller shutter doors MyDoor BASIC - up to 400W Control unit selection guide 230 Vac control unit for the wireless control of roller shutter doors, with outdoor container for motors up to 400W. wall-mounted ROLLER SHUTTER DOOR 230 Vac CONTROL UNIT TVPRP868A08R (Page 75) • Modes of control: automatic (with automatic closing), semi-automatic (without automatic closing) Input: • traditional photocell • resistive safety edge (8K2) • wired infrared safety edge • manual pushbuttons 1 230 Vac MOTOR DOORKIT1 wall-mounted (Bidirectional communication and remote control) TVPRP868A08R DOORKIT1 Model/Code Comparison table • • • Power supply: 230 Vac Power output: 400W Protection rating: IP54 Dimensions: 205 x 145 x 85 mm Code: TVPRP868A08R Output: • courtesy light (230 Vac - max. 300W) • ﬂashing light (230 Vac - max. 60W) (Page 76) • TECHNICAL SPECIFICATIONS: Basic Accessories for MyDoor BASIC Output for courtesy light Output for flashing light Input for traditional photocell • Input for resistive safety edge • • • • automatic (with automatic closing) • • semi-automatic (without automatic closing) • • • • Input for wired infrared safety edge Modes of control Pushbutton input for manual controls Kit My Safe OPTIONAL • GSM module for remote management OPTIONAL Ask Me - Bidirectional transmission • Remote management of the courtesy light • “Holiday” mode to lock the control unit Keypad Cable Light Kit for the security of rolling doors including a MASTER receiver (Electronic Board) to be connected to the control unit and a SLAVE device (BST24) to be fixed on the door and to be connected to the photocell of the safety edge. The communication between these devices is wireless eliminating the wiring between the control unit and the safety edge. The SLAVE device connected to the photocell of the safety edge transmits the information to the MASTER, allowing to secure the area of movement of the shutter door. If an obstruction is detected (people, animals, things) the SLAVE device immediately sends a signal to the MASTER that will instantly stop the door. TECHNICAL SPECIFICATIONS: Pushbutton Plus Accessories for MyDoor BASIC BST24 - My Safe Frequency: 2,4 GHz Power supply: 3,6V ± 10% Lithium battery or 2x1,5V AA Protection rating: IP54 Dimensions: 225 x 40 x 20 mm Code: BST24 • IP 54 74 20 75 Control system for roller shutter doors MyDoor EVOLUTION KIT for roller shutter doors Accessories for KIT MyDoor EVOLUTION 230 Vac Control unit - up to 400W 1 230 Vac control unit for the wireless control of roller shutter doors, with outdoor container for motors up to 400W. • Built-in cable, front keypad and courtesy light • Ask me: bidirectional communication between control unit and transmitter • Built-in GSM Quad-Band module for remote management of the control unit • Built-in MASTER receiver module: possibility of connecting SLAVE safety devices (BST24) in the wireless mode • Cutting out of the safety device with the magnetic contact in the last stage of closing, if the flooring is irregular • 3 modes of control: automatic (with automatic closing), semiautomatic (without automatic closing) and industrial (deadman) • “Holiday” mode to lock the control unit • Possibility of connecting wireless shock sensor TVSSH868A01 BST24 2 Intense Ask me - Bidirectional transmitter TECHNICAL SPECIFICATIONS: 4-channel wireless bidirectional wall transmitter. Just press the “Ask” pushbutton for door status feedback. Power supply: 230 Vac Maximum power motor: 400W Protection rating: IP20 Dimensions: 205 x 145 x 85 mm The colour LED advises the door status: Red LED = Door is open Blue LED = Door is closed White polycarbonate Code: TRTXI868BB04 Black polycarbonate Code: TRTXI868NN04 TXP - Bidirectional transmitter 4-channel wireless bidirectional hand transmitter with fixing support. Code: TRTXP868M04 TECHNICAL SPECIFICATIONS: Kit for the security of rolling doors including a MASTER receiver (Electronic Board) to be connected to the control unit and a SLAVE device (BST24) to be fixed on the door and to be connected to the photocell of the safety edge. The communication between these devices is wireless, eliminating the wiring between the control unit and the safety edge. The SLAVE device connected to the photocell of the safety edge transmits the information to the MASTER, allowing to secure the area of movement of the shutter door. If an obstruction is detected (people, animals, things) the SLAVE device immediately sends a signal to the MASTER that will instantly stop the door. Frequency: 2,4 GHz Power supply: 3,6V ± 10% Lithium battery or 2x1,5V AA Protection rating: IP54 Dimensions: 225 x 40 x 20 mm SSH - Wireless shock sensor Detects abrupt movements. The wireless shock sensor, with buzzer integrated, located on the roller shutter warns via radio of the attempt to break in. Power supply: battery. Code: TVSSH868A01KIT Buzzer 2 TXP - Transmitters 3 Two 2-channel wireless hand transmitters with fixing support. TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2032 Dimensions: 60 x 30 x 10 mm Fixing support GSM receiver Plug-in GSM module for remote control of roller shutter doors, to be installed into the control unit. TECHNICAL SPECIFICATIONS: Power supply: 230 Vac GSM: Quad-band Protection rating: IP20 Dimensions: 90 x 71 x 60 mm Code: GSM900 Code: DOORKIT1 76 77 prp a08R Control system for roller shutter doors Safety systems for industrial doors M Control unit for roller shutter doors - Connections Radio Safe Kit The system consists of a MASTER to be connected to the motor control unit, and of a SLAVE transceiver to be placed onto the entry door and connected to the safety edge. Communication between these two devices is wireless so that the spiral cable is unnecessary. The SLAVE device - connected to the safety edge photocell - transmits information to the MASTER, allowing to make the entry door motion range safe. If an obstacle is detected (persons, animals, things), the SLAVE device instantaneously sends a signal to the MASTER connected to the control unit, which immediately blocks the entry door. System only suitable for connections with control units with autotest. According to EN ISO 13849-1 TECHNICAL SPECIFICATIONS: Power supply: 12/24 V Voltage: 30 V Current: 1 A Carrier frequency: 2.4 GHz Dimensions: 118 x 52 x 25 M M 230 VAC CONTROL UNIT - MYDOOR BASIC KIT TVPRP868A08R M 230 VAC CONTROL UNIT - MYDOOR EVOLUTION KIT prp a08R Antenna DOORKIT1 GSM module Buzzer Antenna prp a08R MASTER Codee: RCSP240A04 M M Power supply: Lithium battery Carrier frequency: 2.4 GHz Dimensions: 115 x 65 x 40 mm SLAVE Codee: TCSP240C04 M prp a08R Motor 1 M prp a10s M Motor 1 prp a10s Safety systems for industrial doors - Connections M prp a10s MASTER SLAVE RCSP240A04 TCSP240C04 rcsp 12/24Vac Power supply tcsp M prp a10s resistive input resistive or infrared input rcsp Autotest Battery Alarm Alarm input input alarm edge from TCSP input input tcsp rcsp tcsp rcsp tcsp Kit Radio Safe: interaction diagram 78 79 Control system for adjustable slats Control system for adjustable slats Complete, easy-to-install solutions for controlling outdoor sheltered areas such as pergolas, verandas and winter garden rooms. Lighting, automated systems, heating, ventilation, sensoristics and protection against extreme weather events can be easily managed in a simple, coordinated way, with a single control. 80 81 Control system for adjustable slats • TVPLA868CC2 (Page 84) TVPLA868AC2 • TVPLM868C80M2 • TVPLT868C80TS 24 Vdc 230 Vac TVPLT868C80T0 ADJUSTABLE SLATS Power supply TVPLD868C80TS 24 VDC 1-2 MOTORS Input: LED card wind sensor rain sensor temperature sensor TVPLS868CTS (Page 84) TVPLD868C80T0 24 Vdc power supply TVPLA868CC2 Input: 2 pushbuttons wind sensor rain sensor TVPLS868CT0 (Page 84) TVPLS868CTS Input: 2 pushbuttons TVPLS868CT0 24 VDC 1 MOTOR Comparison table Model/Code Control unit selection guide • • • • • • 1 1 1-2 1-2 • • • • • • • • • • • Number of motors controlled 1 1 1-2 1 1 • • • • • Motor output 24 Vdc 230 Vac 24 VDC 1 MOTOR Input: 2 pushbuttons Input: 2 pushbuttons wind sensor rain sensor 230 Vac power supply 230 VAC 1 MOTOR 82 TVPLD868C80T0 (Page 85) 4,5A • • • • 3A • 350W TVPLD868C80TS (Page 85) LED output Compatible with LED card Input: 2 pushbuttons Input: 2 pushbuttons wind sensor rain sensor 230 VAC 1-2 MOTORS Maximum power x motor TVPLT868C80T0 (Also suitable for sunblinds) • • Pushbuttons - separate controls • (Page 85) • • • • • • • • • • Weather sensors inputs TVPLT868C80TS Input: 2 pushbuttons light sensor wind sensor rain sensor (Also suitable for sunblinds) Input: LED card wind sensor rain sensor temperature sensor (Page 86) (Page 86) TVPLM868C80M2 (Also suitable for sunblinds) • • wind rain temperature • • • • • • • • • light Working time configuration • • • • • • • • • 54 54 54 54 54 54 54 54 54 IP TVPLA868AC2 (Page 86) 83 Control system for adjustable slats 24 Vdc control unit - 1 24 Vdc motor for adjustable slats PLS 24 Vdc control unit with radio receiver to control 24 Vdc motors for adjustable slats. • Self-learning limit switch and operating times • Input with 2 manual buttons for separate opening and closing controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter PLS 24 Vdc control unit with radio receiver to control 24 Vdc motors for adjustable slats. • Self-learning limit switch and operating times • Input with 2 manual buttons for separate opening and closing controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter 230 Vac control unit - 1 24 Vdc motor for adjustable slats TECHNICAL SPECIFICATIONS: Power supply: 24 Vdc Maximum power: 4,5A Protection rating: IP54 Dimensions: 160 x 65 x 40 mm 80Wated intengsrformer tra TECHNICAL SPECIFICATIONS: 80Wted intengsrfaormer tra • Independent or simultaneous control of motor outputs • Motor speed control, adjustable with trimmer • Self-learning limit switch and operating times • Automatic or manned (deadman) radio controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter • OPTIONAL: LED CARD for 1-colour, RGB or RGBW LED 24 Vdc controller 230 Vac control unit with radio receiver to control 24 Vdc motors for adjustable slats. TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power: 3A Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLD868C80T0 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power: 3A Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLD868C80TS Sensor inputs: • Wind • Rain 24 Vdc control unit - 1-2 24 Vdc motors for adjustable slats 24 Vdc control unit with radio receiver to control 24 Vdc motors for adjustable slats. PLD • 80W integrated transformer • Self-learning limit switch and operating times • Input with 2 manual buttons for separate opening and closing controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter Code: TVPLS868CTS Sensor inputs: • Wind • Rain PLA 230 Vac control unit with radio receiver to control 24 Vdc motors for adjustable slats. • 80W integrated transformer • Self-learning limit switch and operating times • Input with 2 manual buttons for separate opening and closing controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter Code: TVPLS868CT0 Power supply: 24 Vdc Maximum power: 4,5A Protection rating: IP54 Dimensions: 160 x 65 x 40 mm PLD 230 Vac control unit - 1 230 Vac motor for adjustable slats TECHNICAL SPECIFICATIONS: Power supply: 24 Vdc Maximum power: 4,5A (x output) Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLA868CC2 80Wated integr ormer transf PLT 230 Vac control unit with radio receiver to control 230 Vac motors for adjustable slats. Also suitable for sunblinds. • 80W integrated transformer • LED CARD integrated for 24 Vdc 1-colour LED controller (60W) • Self-learning operating times • Input with 2 manual buttons for separate opening and closing controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power motor: 350W Maximum power LED output: 60W Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLT868C80T0 Sensor inputs: • Rain • Wind • Temperature to prevent the formation of ice • Combination of temperature and rain sensors to detect snow 84 85 Control system for adjustable slats 80gWrated inte ormer transf PLT 230 Vac control unit with radio receiver to control 230 Vac motors for adjustable slats. Also suitable for sunblinds. • 80W integrated transformer • LED CARD integrated for 1-colour LED 24 Vdc controller (60W) • Self-learning operating times • Input with 2 manual buttons for separate opening and closing controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power motor: 350W Maximum power LED output: 60W Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLT868C80TS Accessories for adjustable slats and screens WIND SENSOR Anemometer: 4 pulses per rotation. Protection rating: IP44 Cable: 190 cm Code: ANEM4 Sensor inputs: • Wind • Rain RAIN SENSOR 230 Vac control unit - 1-2 230 Vac motors for adjustable slats/screens 80Wated intengsrformer tra PLM 230 Vac control unit with radio receiver to control 230 Vac motors for adjustable slats and screens. • 1 motor output for adjustable slats • 1 motor output for the independent control of screens • 80W integrated transformer • LED CARD integrated for 1-colour LED 24 Vdc controller (60W) • Run-time conﬁguration for adjustable slats • Input with 2 manual buttons for separate opening and closing controls for both applications • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter Power supply: 230 Vac Maximum power motor: 350W (x output) Maximum power LED output: 60W Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLM868C80M2 86 TEMPERATURE SENSOR Temperature sensor (NTC 10K/3435K) to be combined with the PLA control units to detect the possible formation of ice. Protection rating: IP67 Cable: 150 cm Code: TMP150 LIGHT SENSOR 230 Vac control unit - 1-2 230 Vac motors for adjustable slats 230 Vac control unit with radio receiver to control 230 Vac motors for adjustable slats. • Independent or simultaneous control of motor outputs • Self-learning limit switch and operating times • Compatible with tubular motors with limit stop that can be programmed via the mains cable • Automatic or manned (deadman) radio controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter • OPTIONAL: LED CARD for 1-colour, RGB or RGBW LED 24 Vdc controller Sensor inputs: • Rain • Wind • Temperature to prevent the formation of ice • Combination of temperature and rain sensors to detect snow Code: RAIN101 TECHNICAL SPECIFICATIONS: Sensor inputs (they only act in the pergola controller): • Rain • Wind • Temperature to prevent the formation of ice • Combination of temperature and rain sensors to detect snow PLA The sensitive surface (capacitive operation) detects rain and snow. Power supply: 12 Vdc - 37mA Maximum power applicable at relay: 0.5A Protection rating: IP54 Cable: 290 cm TECHNICAL SPECIFICATIONS: Light sensor with photodiode. Brightness range from 1 klux to 100 klux. Protection rating: IP44 Cable: 190 cm Code: LUX-01 Power supply: 230 Vac Maximum power: 350W (x output) Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLA868AC2 ANTENNA Whip aerial 868 MHz with bracket and 3.5m cable. Code: ANT868 87 Control system for adjustable slats Solution for LED lights Control units for adjustable slats - Connections LED CARD - 1-colour LED dimmer Plug-in board controlling 24 Vdc 1-colour LED. Compatible with PLA control units. • ON/OFF and DIMMER function • Controlled by wireless transmitters • 3 outputs with independent or synchronized control TECHNICAL SPECIFICATIONS: Power supply: 24 Vdc (of the PLA control unit) Number of outputs: 3 Maximum power: 60W (x output) Dimensions: 65 x 45 mm Code: TVSTRD00PSI24 Maximum power applicable to the PLA control unit (with motors and LED lights): 240W. 24 VDC CONTROL UNIT - 1 24 VDC MOTOR 24 VDC CONTROL UNIT - 1-2 24 VDC MOTORS M 230 VAC CONTROL UNIT - 1 24 VDC MOTOR TVPLS868CT0 / TVPLS868CTS TVPLA868CC2 TVPLD868C80T0 / TVPLD868C80TS pls Antenna 24 Vdc Power supply Rain sensor* Wind sensor* M M * TVPLS868CTS pls pls pla cc2 MM M • ON/OFF and DIMMER function • Controlled by wireless transmitters • Pre-set 8 colours • Automatic colour cycle function M TECHNICAL SPECIFICATIONS: pla cc2 230 Vac Power supply M plaMcc2 * TVPLD868C80TS M pld 230 VM AC CONTROL UNIT - 2 230 VAC MOTORS M M Antenna M M 230 Vac motor M M Code: TVRGB00PSI24 230 Vac Power supply Maximum power applicable to the PLA control unit (with motors and LED lights): 240W. M M pld M pld * TVPLT868C80TS MAntenna Pushbutton input for manual controls LED output Rain sensor Wind sensor M M pld Temperature sensor M M M M M plt plt pla ac2 pla ac2 M M M LED output Wind sensor plt M2 230 Vac power supply 12-24 Vdcplt LED CARD power supply pla ac2 pla ac2 of LED CARD Light sensor Pushbutton input plt M2 for manual controls - 230 Vac motors Rain sensor* M plt 230 Vac motors 230 Vac Power supply plt plt M Wind sensor* M M M pld pld pld 24 Vdc motor M Antenna Power supply: 24 Vdc (of the PLA control unit) Number of outputs: 3 Maximum power: 60W (x output) Dimensions: 65 x 45 mm pla cc MM M MM TVPLM868C8M2 M pldM M MM Wind sensor* Rain sensor* pld M M M M M M Mpls M LED CARD pla cc2 TVPLA868AC2 TVPLT868C80T0 / TVPLT868C80TS pla cc2 pls M 24 Vdc Power supply pls M M pla cc2 230 VAC CONTROL UNIT - 1 230 VAC MOTORM 230 VMAC CONTROL UNIT - 1/2 230 VAC MOTORS pls Antenna M M M Plug-in board controlling 24 Vdc RGB LED (red, green, blue). Compatible with PLA control units. M M Temperature sensor pla cc M M M Rain sensor Wind sensor M Pushbutton input for manual controls M 24 Vdc motor pls pls 24 Vdc motors Antenna Pushbutton input for manual controls LED CARD - RGB LED dimmer M Rain sensor + pla ac2 - plt M2 strd - +- M M M plt M2 LED Card for adjustable slats - Connections M M - - M LED CARD - RGBW LED dimmer + • ON/OFF and DIMMER function • Controlled by wireless transmitters • Pre-set 8 colours • Automatic colour cycle function TECHNICAL SPECIFICATIONS: M2 plt M2pltTVSTRD00PSI24 Power supply: 24 Vdc (of the PLA control unit) Number of outputs: 4 Maximum power: 60W (x output) Dimensions: 65 x 45 mm - + - - -+ + rgb - - + + ... rgb - - + + + ... ... Plug-in connector for rgbw PLA control unit ... Common ... rgbw Maximum power applicable to the PLA control unit (with motors and LED lights): 240W + ... ... + + Common Maximum power applicable to the PLA control unit (with motors and LED lights): 240W - + rgb ... ... rgbw rgbw rgb ... ... -- rgb + + + + rgb Plug-in connector for PLA control unit Maximum power applicable to the PLA control unit ... ... (with motors and LED lights): 240W - + rgb rgbw - Plug-in connector for PLA control unit strd TVRGBW00PSI24 - Common - - + ... rgb - LED CARD - RGBW LED DIMMER strd + ... strd strd + 88 plt M2 Code: TVRGBW00PSI24 Maximum power applicable to the PLA control unit (with motors and LED lights): 240W. TVRGB00PSI24 strd strd ... - LED CARD - RGB LED DIMMER LED CARD - 1-COLOUR LED DIMMER + + strd rgb strd + Plug-in board controlling 24 Vdc RGB and WHITE LED (red, green, blue, white). Compatible with PLA control units. Controls the RGB and WHITE outputs independently thanks to the separate memorization of the transmitter channels. plt M2 plt M2 ... rgbw 89 Control system for awnings and screens Control system for awnings and screens Automatic, intelligent blinds. Just one click to open or close the blind and always ensure the right amount of light, privacy and protection against the weather. A single system for adjusting the blind and any lighting of the actual blind. The weather sensors send the pulse to the motor control unit to open or close the blind according to the detected conditions. 90 91 Control system for awnings and screens • • • TVPLA868SC2 • TVPL4868AC4 (Page 94) TVPLM868C80M2 (Also suitable for adjustable slats) TVPRL868A02 TVPLT868C80TS TVPLT868C80TS (Also suitable for adjustable slats) (Page 94) inputs: 2 pushbuttons wind sensor rain sensor 230 Vac CONTROL UNIT TVPLT868C80T0 TVPLT868C80T0 AWNINGS inputs: 2 pushbuttons Model/Code 1 230 VAC TUBULAR MOTOR Comparison table TVPRS868A04B Control unit selection guide • • • Type of blind awning screen Power supply inputs: pushbutton wind sensor light sensor 1-2 230 VAC TUBULAR MOTORS inputs: 2 pushbuttons light sensor wind sensor rain sensor vibration sensor TVPRL868A02 (Page 94) • 24 Vdc 230 Vac • • • • • • 1 1 1 1-2 1 1-4 • • • • • • Number of tubular motors controlled TVPLM868C80M2 (Also suitable for adjustable slats) (Page 94) • 24 Vdc 230 Vac Maximum power x motor • 4,5A 350W • • • • 2 2 • • • • - - LED output 1 230 VAC TUBULAR MOTOR TVPRS868A04B (Page 95) 230 Vac CONTROL UNIT • Pushbuttons - separate controls 1 2 - Weather sensors inputs 4 230 VAC TUBULAR MOTORS SCREENS 1-2 Output wind sensor input TVPL4868AC4 (Page 95) wind • • • rain • • • • • • • light Current draw control 24 Vdc CONTROL UNIT 2 24 VDC TUBULAR MOTORS inputs: wind sensor rain sensor TVPLA868SC2 (Page 95) • Configuration of the limit switches for electronic motors • • IP 54 92 54 54 54 54 54 54 93 Control system for awnings and screens 230 Vac control unit - 1 230 Vac tubular motor for awnings PLT 230 Vac control unit with radio receiver to control 230 Vac motors for awnings. Also suitable for adjustable slats. • 80W integrated transformer • LED CARD integrated for 1-colour LED 24 Vdc controller (60W) • Self-learning operating times • Input with 2 manual buttons for separate opening and closing controls • 4 pre-set tilt angles (open, closed and 2 intermediate positions) settable with 7-channel transmitter TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power motor: 350W Maximum power LED output: 60W Protection rating: IP54 Dimensions: 230 x 70 x 74 mm 230 Vac control unit - 1 230 Vac tubular motor for screens PRS 230 Vac control unit with radio receiver to control 230 Vac motors for screens. TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power: 350W Protection rating: IP54 Dimensions: 115 x 65 x 40 mm Code: TVPRS868A04B Code: TVPLT868C80T0 With sensor inputs Code: TVPLT868C80TS TVPLT868C80TS control unit with sensors inputs: • Wind • Rain 230 Vac control unit - 4 230 Vac tubular motors for screens PRL 230 Vac control unit with radio receiver to control 230 Vac motors for awnings. • Automatic opening if the set light threshold is exceeded • Automatic closing if the set wind threshold is exceeded • Possibility of enabling and disabling the light sensor by transmitter TVTXQ868S03 • Possibility of setting the light threshold from the transmitter • Manual button input for OPEN - STOP - CLOSE control TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power motor: 350W Protection rating: IP54 Dimensions: 137 x 96 x 46 mm Code: TVPRL868A02 PL4 230 Vac control unit with radio receiver to control 230 Vac motors for screens. • Independent or synchronised control of 4 motors • Automatic or manned (deadman) radio controls • Conﬁguration of the limit switches for electronic motors TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power: 350W (x output) Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPL4868AC4 Sensor inputs: • Wind Sensor inputs: • Wind • Light 230 Vac control unit - 1-2 230 Vac tubular motors for awnings/screens PLM 230 Vac control unit with radio receiver to control 230 Vac motors for awnings and screens. • Independent control of 2 motors • 80W integrated transformer • LED CARD integrated for 1-colour LED 24 Vdc controller (60W) • Conﬁguration of the limit switches for electronic motors • Input with 2 manual buttons for separate opening and closing controls of both motors • Possibility of enabling and disabling the light sensor by transmitter TVTXQ868S03 Sensor inputs: • Rain • Wind • Light • Vibration (wind) When the sensors are activated, the control unit then activates both motors with a 5-second delay between them. 94 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power motor: 350W (x output) Maximum power LED output: 60W Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLM868C80M2 24 Vdc control unit - 2 24 Vdc tubular motors for screens PLA 24 Vdc control unit with radio receiver to control 24 Vdc motors for screens. • Independent or synchronised control of motor outputs • Automatic or manned (deadman) radio controls • Safety stop through current draw control • Possibility of synchronising SLAVE control units through BUS communication Sensor inputs: • Wind • Rain TECHNICAL SPECIFICATIONS: Power supply: 24 Vdc Maximum power: 4,5A (x 2 outputs) Protection rating: IP54 Dimensions: 230 x 70 x 74 mm Code: TVPLA868SC2 24 Vdc SLAVE control unit with built-in receiver Code: TVPLA000SC2 95 pla sc2 Accessories for awnings and screens M M M M M Control unit for awnings - Connections M M RAIN SENSOR The sensitive surface (capacitive operation) detects rain and snow. Power supply: 12 Vdc - 37mA Maximum power applicable at relay: 0.5A Protection rating: IP54 Cable: 290 cm M Code: RAIN101 prs a04b Code: LUX-01 230 VAC CONTROL UNIT - 2 230 VAC MOTORS TVPLT868C80T0 / TVPLT868C80TS pla sc2 TVPRL868A02 TVPLM868C80M2 Pushbutton Antenna input for manual controls 230 Vac motor M plt M2 LED Output 230 Vac power supply M M Wind sensor* WIND SENSOR plt M2 * TVPLT868C80TS M Light M sensor sensor Pushbutton Antenna input for manual controls plt Sensor to be placed on the moving part of the blind, which detects vibrations of the structure caused by wind. It has 4 sensitivity trigger thresholds; if the movement of the blind exceeds the set values, it sends a ‘CLOSE’ command to the control unit. Power supply with 2 AA batteries with 3 years life. It come with a base for snap-on mounting; to change the batteries, just take the sensor out of the base and re-insert it afterwards. TECHNICAL SPECIFICATIONS: Wind sensor Rain sensor plt M2 prs a04b TVPLA868SC2 prd 230 Vac power supply Antenna M M M M M M prs230 a04b Vac 230 Vac power supply motor plt plt M2 M Rain sensor Wind M sensor M M M M 230 Vac motorsM Wind sensor prs a04b M prd Antenna M M M ANLUX - Wireless connection to sensors M prl a02 M M M prv prs a01-02 plt plt M2 24 Vdc power supply M prs 12 - 24 M M M M M Connection toM SLAVE control unit prv M TECHNICAL SPECIFICATIONS: M 24 Vdc motors pla sc2 M Manlux M M prt pla ac4 pla sc2 M prh prs a01-02 Code: TVANLUX868SWR prl a02 pla sc2 prt Power supply: 230 Vac Protection rating: IP54 Dimensions: 137 x 96 x 46 mm 24 VDC CONTROL UNIT- 2 24 MVDC MOTORS prt TVPL4868AC4 TVPRS868A04B prh Wireless 230V transmitter to which sun, wind and rain sensors can be connected. The sensor trigger thresholds can be set to obtain the best comfort level for the home. The signal that the threshold has been exceeded is sent via radio to the motor, which will open or close the blind according to the pulse sent. M M M 230MVAC CONTROL UNIT - 1 230 VAC MOTOR CONTROL UNIT - 4 230 VAC MOTORS anlux 230 VAC prh prl a02 Power supply: 2 batteries 1,5 V AA Protection rating: IP54 Dimensions: 130 x 40 x 37 mm M M M M M M M prs 12 - 24 plt M2 pla ac4 plt prs a01-02 M prh prt prd M M prl a02 prl a02 anlux anlux sensors M M M 96 anlux 230 Vac power supply pla ac4 M M Code: TVSVB868A01 transmitter ANLUX LED output Control unit for screens M M M- Connections WIND SENSOR - Vibration control unit pla ac4 Pushbutton input for manual controls M M MWind 230 Vac a02 230 Vac powerprlsupply motor Rain sensor* Code: ANEM4 M 230 Vac motors p Antenna Light sensor plt M M prs a04b 230 VAC CONTROL UNIT - 1 230 VAC MOTOR M Anemometer: 4 pulses per rotation. Protection rating: IP44 Cable: 190 cm M 230 VAC CONTROL UNIT - 1 230 VAC MOTOR LIGHT SENSOR Light sensor with photodiode. Brightness range from 1 klux to 100 klux. Protection rating: IP44 Cable: 190 cm M M M 97 prs 12 - 24 prv prs a01-02 M M Control system for roller shutters and Venetian blinds Control system for roller shutters and Venetian blinds It’s easy, inexpensive and quick to automate new or existing roller shutters. The control may be a simple wall-mounted, tabletop or portable transmitter. This wireless solution requires no building work or complex wiring systems. Green Mouse, the transmitter with light intensity sensor, completes the automation system guaranteeing the automatic adjustment of the shutters. 98 99 Control system for roller shutters and Venetian blinds Control unit selection guide 230 Vac control unit - 1 230 Vac motor for roller shutters wall-mounted 230 Vac CONTROL UNIT into the roller shutter box 1 230 Vac MOTOR ROLLER SHUTTER VENETIAN BLINDS TVPRH868A01-S (Page 101) PRH - touch TVPRT868A01T (Page 101) 230 Vac control unit with radio receiver and soft-touch buttons to control 230 Vac motors for roller shutters. Can be inserted in the wall box of the switch. TVPRS868A02 (Page 101) • It can replace the wall-mounted mechanical key without needing any building work • Mode of operation: automatic, semi-automatic and deadman 55mm diameter electrical boxes TVPRD868B01T (Page 102) 12 Vdc CONTROL UNIT 1 12 Vdc MOTOR into the roller shutter box TVPRS868A12 (Page 102) 24 Vdc CONTROL UNIT 1 24 Vdc MOTOR into the roller shutter box TVPRS868A24 (Page 102) 230 Vac CONTROL UNIT 1 230 Vac MOTOR into the Venetian blind profile TVPRV868A01 (Page 102) 24 Vdc CONTROL UNIT 1 24 Vdc MOTOR into the Venetian blind profile TVPRV868A24 (Page 102) PRT 230 Vac control unit with radio receiver to control 230 Vac motors for roller shutters. Can be built into the roller shutter box. • 1 m power supply cable • Input for 1 dynamic pushbutton TVPRS868A02 TVPRD868B01T TVPRS868A12 TVPRS868A24 • • • • • TVPRV868A24 TVPRT868A01T • TVPRV868A01 TVPRH868A01-S Model/Code Comparison table • • TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power: 350W Protection rating: IP20 Dimensions: 80 x 80 x 35 mm Code: TVPRH868A01-S TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power: 350W Protection rating: IP44 Dimensions: 118 x 20 x 50 mm Code: TVPRT868A01T Type of application roller shutters Venetian blinds Power supply 12 Vdc • • 24 Vdc 230 Vac Motor output 12 Vdc • • • • • • • 24 Vdc 230 Vac Maximum power x motor • • • • • • • • • 2 touch 1 2 1 2 2 2 2 • • • • • • • • 20 44 44 20 44 44 44 44 230 Vac control unit with radio receiver to control 230 Vac motors for roller shutters. Can be built into the roller shutter box. • Input with 2 manual buttons for separate opening and closing controls TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power: 350W Protection rating: IP44 Dimensions: 125 x 38 x 20 mm Code: TVPRS868A02 • • 4,5A 350W • PRS • • • Pushbutton inputs Compatible with Green Mouse SCREEN IP 100 101 Control system for roller shutters and Venetian blinds M PRD TECHNICAL SPECIFICATIONS: 230 Vac control unit with radio receiver to control 230 Vac motors for roller shutters. Ideal for wall shunt boxes of 55 mm diameter. Power supply: 230 Vac Maximum power motor: 350W Protection rating: IP20 Dimensions: 54 x 49 x 25 mm • Input for 1 dynamic pushbutton • Can be controlled by a single or dual radio channel and 3-key transmitter • Possibility to memorize single radio channel (OPEN, STOP, CLOSE) M Accessories for roller shutters and Venetian blinds prs a04b prs a04b 1 button mechanic switch. OPEN/STOP/CLOSE for roller shutters and blinds. Current 16A. Dimensions: 76x27x43mm. pla sc2 M M M M M M M M M PRS M M • Input with 2 manual buttons for separate opening and closing controls M plt plt M2 M M prl a02 Code: SM0062-2 M plt Pushbutton version MSM0063-2 M Code: M plt M Mpla ac4 pla a M plt ac4 pla pla ac4 M anlux 230 Vac Motor M M anlux Pushbutton input for manual controls Power supply 230 Vac pla ac4 230 Vac Motor M M M M prh prh anlux prh M prtprt Pushbutton input for manual controls Power supply 230 Vac Power supply 230 Vac M M prd M 230 Vac Motor prd prs a01-02 M M prt prd M Antenna M prd 230 VAC CONTROL UNIT - 1 230 VAC MOTOR 12 VDC CONTROL UNIT - 1 12 VDC MOTOR 24 VDC CONTROL UNIT - 1 24 VDC MOTOR TVPRD868B01T TVPRS868A12 TVPRS868A24 / TVPRV868A24 Pushbutton input for manual M controls prs a01-02 anlux TVPRS868A02 / TVPRV868A01 prl a02 M Version for 24 Vdc motors Code: TVPRV868A24 M prt TVPRT868A01T M M anlux Code: TVPRV868A01 prh TVPRH868A01-S prt M Power supply: 230 Vac 230 Vac control unit with radio receiver to control 230 Vac motors for Maximum power: 350W prl a02Protection rating: IP44 Venetian blinds. Dimensions: 125 x 38 x 20 mm Can be built into the Venetian blind profile. M prd Pushbutton input for manual controls 12 Vdc power supply 12 Vdc motor M M prv M prh prt M M 230 VAC CONTROL UNIT - 1 230 VAC MOTOR prh TECHNICAL SPECIFICATIONS: M M M M 230 VAC CONTROL UNIT - 1 230 VAC MOTOR M M 230 Vac control unit - 1 230 Vac motor for Venetian blinds M M M prlUNIT a02 - 1 prl 230 VAC CONTROL 230a02 VAC MOTOR plt plt M2 102 plt M2 M plt M2 M prl a02 • Input with 2 manual buttons for separate opening and closing controls • The tilt of the slats can be adjusted with short pulses (less than 300 ms), whether in the opening or closing direction M Control unit for roller shutters - Connections Version for 12 Vdc motors Code: TVPRS868A12 PRV plt M2 M Power supply: 24 Vdc Maximum power: 4,5A Protection rating: IP44 Dimensions: 125 x 38 x 20 mm Code: TVPRS868A24 Switch versionM 76x62x52mm M Code: SM0062-3 Pushbutton version 76x62x52mm Code: SM0063-3 pla sc2 TECHNICAL SPECIFICATIONS: 24 Vdc control unit with radio receiver to control 24 Vdc motors for roller shutters. Can be built into the roller shutter box. plt M2 M Pushbutton version Code: SM0063 M pla sc2 1 button mechanic M M switch. OPEN/STOP/CLOSE for roller shutters and blinds. M Current 16A. Dimensions: 80x80x39mm. M M M SM Skin - Mechanic switch / pushbutton M M Code: SM0062 pla sc2 76x62x52mm version prs a04b pla sc2 MM 24 Vdc control unit - 1 24 Vdc motor for roller shutters M M M M M prs a04b prs a04b M M M M SM Cube - Mechanic switch / pushbutton Code: TVPRD868B01T M M Power supply 230 Vac prs a01-02 230 Vac Motor prs a01-02prs a01-02 M M Antenna M 24 Vdc motor M Antenna M M prs prv12 - 24 prv Pushbutton input for manual controls 24 Vdc power supply prs 12 - 24 prv M prs 12 - 24prs 12 - 24 103 Control system with PC or Smartphone Fountain Irrigation system Roller shutters Outdoor lights LED lights Water leak detector Halogen lights Control system with PC or Smartphone Roller shutters Resistive or infrared heater LED lights Halogen lights Halogen lights Halogen lights Roller shutters Automatic temperature control Outdoor lights Centralized control Sunblinds Alarm system MyHand LED lights Fluorescent lamps Halogen lights Sunblinds Roller shutters LED lights Resistive or infrared heater Fluorescent lamps Gates Roller shutter doors Fluorescent lamps Gas detector Water leak detector Ventilation Fluorescent lamps Halogen lights LED lights Alarm system Extraction Roller shutters Roller shutters With just a touch you can adapt your home automation to your habits. Interact with all automated systems from anywhere in your home through PC, Tablet or Smartphone, connecting up to your Wi-Fi router. With Teleco you can communicate with all home automation systems: you can use your own interface without having to change habits. 104 105 Control system with PC or Smartphone MyHand - Control system with PC or Smartphone RS232 - Control system with PC and BUS system TECHNICAL SPECIFICATIONS: MyHand MyHand lets you interact with all automated systems from anywhere in your home through PC, Tablet or Smartphone, connecting up to your Wi-Fi router without having to install applications. • At any time of day, 24 hours out of 24, you can have the whole house under control through a single wireless device • Control through any terminal PC, Smartphone, tablet: any Internet-enabled device can be used to interface with MyHand without having to install dedicated applications or softwares • You can send commands at any time using any communication device connected to your home Wi-Fi network for lighting and automated systems • It’s so simple to create scenes and program the weekly timer • Its stylish design means that MyHand ﬁts in discreetly anywhere in your home • Integrated 230 V power supply unit with 12 Vdc output RS232 Power supply: 12 Vdc Dimensions: 127 x 127 x 25 mm TECHNICAL SPECIFICATIONS: RS232 is a transceiver that transforms RS232 serial port commands in single or centralized wireless commands towards lights receivers, LED, awnings, rolling shutters, rolling doors, gates and alarm systems. Transmission and reception of radio signal on RS232 serial commands. TVMH868A01 Power supply: 5 Vdc Baud rate: 19200 Protection rating: IP20 Dimensions: 54 x 49 x 25 mm Code: TVTRX232 Simple integration: all you need is a serial port… the rest is completely wireless. It’s great being able to add Teleco devices without having to alter the existing system. Wi-Fi RS232 BUS TVTRX232 system ROUTER MY-HAND Teleco communicates with all home automation systems: use your own interface without changing habits, simply by installing RS232. User-friendly interface: so simple to create scenes and program the weekly timer 106 107 Control systems Wireless transmitter Control systems Wireless transmitter 108 109 Control systems Wireless transmitter Transmitter selection guide TVTXI868BB01G 1 COMMAND 1 GROUP (Page 116) TVTXI868BB01 6 GROUPS (Page 116) TVEVO868N24 (Page 118) TVTXI868BB02G UP TO 2 COMMANDS 1 GROUP (Page 116) TVTXI868BB02 UP TO 7 COMMANDS EVO - PORTABLE 6 GROUPS TVEVO868N42 (Page 118) TVTXI868BB04 UP TO 4 COMMANDS (Page 117) UP TO 7 COMMANDS (IT IS IDEAL FOR SCENES ) 1 GROUP TVEVO868N03 (Page 118) TVTXI868BB07 (Page 117) SINGLE TVTXI868BB03L TVEVO868N07D (Page 119) FOR DIMMER AND LIGHTS TVEVO868N07C (Page 117) (RGB scenes) FOR DIMMER (Page 119) DOUBLE SINGLE TVTXI868BB06L (Page 117) DOUBLE 6 GROUPS TVEVO868N18 (Page 118) TVTXI868BB03 (Page 117) FOR SCREEN 110 TVEVO868N07 (Page 118) (Page 116) INTENSE - WALL-MOUNTED TVEVO868N04 (Page 118) UP TO 4 COMMANDS FOR ADJUSTABLE SLATS 6 GROUPS TVEVO868N42P (Page 119) TVTXI868BB06 (Page 117) 111 Control systems Wireless transmitter Transmitter selection guide TVTXP868N01 1 COMMAND TVTXP868N02 HAND TRANSMITTER GREEN MOUSE WITH LIGHT SENSOR (Page 120) UP TO 2 COMMANDS TVTLL868N30 FOR ON/OFF RECEIVER (Page 120) (Page 124) TVTLL868N01 FOR LIGHT DIMMER RECEIVER (Page 124) TVMIO868A02 TVTSL868N30 FOR CONTROL UNIT OF SCREEN (Page 120) (Page 124) TVTXP868N04 UP TO 4 COMMANDS (Page 120) EOS WITH DUSK/DAWN FUNCTION TVSLC868A01 WITH TIMER TVTXC868C04 (Page 124) TVMIO868A04 (Page 120) (Page 122) TVTXQ868A07 (Page 121) 1 GROUP UP TO 7 COMMANDS WITH KEYPAD AND ACCESS CODE TVTXK868B04 (Page 122) TVTXQ868A42 6 GROUPS (Page 121) WITH MOVEMENT SENSOR POD - PORTABLE TVTXS868B02 (Page 122) 1 GROUP TVTXQ868A03 (Page 121) FOR SCREEN 6 GROUPS TVTXQ868S03 (Light sensor control) (Page 121) UP TO 2 COMMANDS TVTXQ868A18 FOR SWITCHES, PUSHBUTTONS OR FREE CONTACT (Page 121) FOR 230 VAC MOVEMENT SENSORS 1 COMMAND MOUSE WALL / TABLE UP TO 2 COMMANDS UP TO 42 COMMANDS (Page 123) (Page 123) BATTERY POWER SUPPLY (Page 121) UP TO 4 COMMANDS TVTXL868B02 (Page 123) TVTXL868A04 (Page 123) (Page 121) FOR SCREEN 112 TVTXL868R02 (Versione 1M) RECESSED TVTXM868A02 TVTXM868A42 (Page 123) TVTXL868R02F TVTXM868A01 (Page 121) TVTXL868A02 TVTXL868A03 (Page 123) 113 Control systems Wireless transmitter Transmitter selection guide Model/Code TVSTRD868SI24G / TVLSTRD868SI24G TVLSTRD868SI24G / TVSTRD868DI24G TVSTRD868NT24 / TVSTRD868NT27 TVSTRD868BSI24G / TVSPOT868AI01 TVSPOT868BI01 / TVSPOT868ADI04 TVSRGBWU868ST25 (W output) TVLSRGBWU868ST25 (W output) TVSTRDW868ST24 Transmitter suggested preset 1 preset 2 preset 3 preset 4 scene 1 scene 2 scene 3 scene 4 increase decrease OFF > cold white > warm white OFF Other possible combinations - ON/OFF/dimmer - ON - OFF - ON/OFF/dimmer - ON - OFF increase decrease OFF - ON/OFF/dimmer - temperature > cold white > warm white OFF/dimmer Model/Code TVRCL868A02F6 Transmitter suggested TVHET868B01 preset 1 preset 2 preset 3 preset 4 TVHET868A04 TVHET868A06 TVVTL868A02 TVRGBDU868ST24 / TVRGBDSY868ST24 TVLRGBDU868ST24 / TVRGBDU868DT24 TVRGBDMX868DT24 / TVRGBDU868NT24 TVRGBDU868BST24 / TVRGBDU868A01 TVRGBDU868B01 / TVRGBDSY868A01 TVRGBDSY868B01 / TVRGBDU868AD02 TVRGBDMX868AD02 TVSRGBWU868ST25 (RGB output) TVLSRGBWU868ST25 (RGB output) TVDLC868A01 TVDMM868A05 TVDMM868G09S TVDMC868BB01 TVDMC868BB02 - ON/OFF/dimmer - ON - OFF preset 1 preset 2 preset 3 preset 4 increase decrease preset 1 preset 2 preset 3 preset 4 increase decrease OFF OFF preset 1 preset 2 preset 3 preset 4 - TVDMA868A01 / TVDMA868A02 TVDMM868G10S preset 1 preset 2 preset 3 preset 4 increase decrease preset 1 preset 2 preset 3 preset 4 increase decrease TVDMM868A05 OFF OFF OFF TVPRP868A08R - ON/OFF/dimmer - ON - OFF increase decrease OFF - ON/OFF/dimmer - ON - OFF increase decrease OFF - ON/OFF/dimmer - ON - OFF - ON/OFF/dimmer - ON - OFF ON/OFF ON/OFF TVRRL868G02P TVRRL868GS02 ON OFF TVPRSD868A02 (for the control of motors) OPEN STOP CLOSE OPEN/STOP/CLOSE ON OFF ON / OFF preset 1 preset 2 preset 3 OFF DOORKIT1 TTVGSM200 / TVRCE868A01 TVRCV868A01 / TVRCM868A02 TVRCM868A2000 / TVRPL868A01P TVPLS868CT0 / TVPLS868CTS TVPLA868CC2 TVPLD868C80T0 / TVPLD868C80TS TVPLT868C80T0 / TVPLT868C80TS TVPLM868C80M2 / TVPLA868AC2 - ON/OFF/dimmer - ON - OFF TVRCD868A01 TVRCD868A04N TVRGL868A02 TVPRSD868A02 (for the control of loads) TVRCL868A02 TVRCL868A02F6 TVRCL868A60 scene 1 scene 2 scene 3 scene 4 colours 1 or 2 selection cycle activation OFF TVDMM868G08S TVDMM868A01S TVDMM868A01SP TVDMC868BB10 114 speed 1 speed 2 speed 3 pause/play colours 1 colours 2 increase decrease OFF ON/OFF OPEN/STOP CLOSE/STOP ON/OFF - preset 1 - preset 2 - preset 3 - preset 4 - OFF preset 1 preset 2 preset 3 preset 4 increase decrease preset 1 preset 2 preset 3 preset 4 increase decrease preset 1 preset 2 preset 3 preset 4 increase decrease OFF - ON/OFF/dimmer - ON - OFF ON/OFF/dimmer OFF OFF OPEN/STOP CLOSE/STOP increase decrease OFF preset 1 preset 2 preset 3 OFF preset 1 preset 2 preset 3 OFF increase decrease OFF preset 1 preset 2 preset 3 OFF - OPEN/STOP/CLOSE - ON/OFF courtesy light OPEN/STOP CLOSE/STOP - OPEN/STOP/CLOSE - ON/OFF courtesy light OPEN STOP CLOSE ON/OFF courtesy light ON/OFF output x CLOSE preset 1 preset 2 OPEN manual CLOSE STOP OPEN/STOP/CLOSE OPEN STOP CLOSE OPEN/STOP CLOSE/STOP TVPRS868A04B OPEN STOP CLOSE OPEN/STOP CLOSE/STOP TVPL4868AC4 TVPLA868SC2 OPEN STOP CLOSE OPEN/STOP/CLOSE preset 1 preset 2 preset 3 preset 4 OPEN/STOP CLOSE/STOP manual STOP TVPRL868A02 LED output command TVPLT868C80T0 TVPLT868C80TS TVPLM868C80M2 - ON/OFF - ON - OFF ON OFF Other possible combinations increase decrease OPEN STOP CLOSE OPEN/STOP CLOSE/STOP ON/OFF/dimmer OFF TVPRH868A01-S/ TVPRT868A01T TVPRS868A02 OPEN STOP CLOSE OPEN/STOP CLOSE/STOP TVPRD868B01T OPEN STOP CLOSE OPEN/STOP/CLOSE TVPRS868A12 / TVPRS868A24 TVPRV868A01 / TVPRV868A24 OPEN STOP CLOSE OPEN/STOP CLOSE/STOP OPEN/STOP CLOSE/STOP 115 Control systems Wireless transmitter Wall transmitter - INTENSE TECHNICAL SPECIFICATIONS: Stylish and simple to fix: all you need is bi-adhesive tape. These wireless transmitters are available in polycarbonate and on request: - Glass - Steel - Transparent polycarbonate Power supply: 3V ± 10% Lithium battery: CR2430 Protection rating: IP20 Dimensions: 86 x 86 x 9,5 mm Powered with 3-year life batteries. Just a click and a tiny door grants you an easy access to the battery to replace it. Low-battery led signal 3 months in advance. 1 command 1 light with dimmer function or 1 screen with OPEN/STOP/CLOSE function Interchangeable frames available on request: POLY GLASS (transparent polycarbonate) SPLIPQBT SPLIPQNT IRON (steel) SPLIMQS GLASS (glass) SPLIVQB SPLIVQN White polycarbonate Code: TVTXI868BB01G Black polycarbonate Code: TVTXI868NN01G Interchangeable frames available on request: For light. White polycarbonate Code: TVTXI868BB03L POLY GLASS (transparent polycarbonate) SPLIPQ3B1T SPLIPQ3N1T IRON (steel) SPLIMQ3S1 For light. Black polycarbonate Code: TVTXI868NN03L GLASS (glass) SPLIVQ3B1 SPLIVQ3N1 For screen. White polycarbonate Code: TVTXI868BB03 For screen. Black polycarbonate Code: TVTXI868NN03 1 command 2 or 4 loads Interchangeable frames available on request: POLY GLASS (transparent polycarbonate) SPLIPQ1B1T SPLIPQ1N1T IRON (steel) SPLIMQ1S1 GLASS (glass) SPLIVQ1B1 SPLIVQ1N1 White polycarbonate Code: TVTXI868BB01 Black polycarbonate Code: TVTXI868NN01 2 push-buttons for the control of 1 or 2 loads Interchangeable frames available on request: POLY GLASS (transparent polycarbonate) SPLIPQBT SPLIPQNT IRON (steel) SPLIMQS GLASS (glass) SPLIVQB SPLIVQN Interchangeable frames available on request: POLY GLASS (transparent polycarbonate) SPLIPQ4B1T SPLIPQ4N1T IRON (steel) SPLIMQ4S1 GLASS (glass) SPLIVQ4B1 SPLIVQ4N1 White polycarbonate Code: TVTXI868BB04 Black polycarbonate Code: TVTXI868NN04 2 lights with dimmer function or 2 screens with OPEN/STOP/CLOSE function White polycarbonate Code: TVTXI868BB02G Black polycarbonate Code: TVTXI868NN02G Interchangeable frames available on request: For light. White polycarbonate Code: TVTXI868BB06L POLY GLASS (transparent polycarbonate) SPLIPQ6B1T SPLIPQ6N1T IRON (steel) SPLIMQ6S1 For light. Black polycarbonate Code: TVTXI868NN06L GLASS (glass) SPLIVQ6B1 SPLIVQ6N1 For screen. White polycarbonate Code: TVTXI868BB06 For screen. Black polycarbonate Code: TVTXI868NN06 1 or 2 loads Control of lights or motors with 4 pre-set levels Interchangeable frames available on request: 116 POLY GLASS (transparent polycarbonate) SPLIPQ2B1T SPLIPQ2N1T IRON (steel) SPLIMQ2S1 GLASS (glass) SPLIVQ2B1 SPLIVQ2N1 White polycarbonate Code: TVTXI868BB02 Black polycarbonate Code: TVTXI868NN02 Interchangeable frames available on request: POLY GLASS (transparent polycarbonate) SPLIPQ7B1T SPLIPQ7N1T IRON (steel) SPLIMQ7S1 GLASS (glass) SPLIVQ7B1 SPLIVQ7N1 White polycarbonate Code: TVTXI868BB07 Black polycarbonate Code: TVTXI868NN07 117 Control systems Wireless transmitter Hand transmitter with wall fixing support - EVO TECHNICAL SPECIFICATIONS: Wall fixing support included Power supply: 3V ± 10% Lithium battery: CR2430 Protection rating: IP20 Dimensions: 125 x 40 x 10 mm 3-channel transmitter 18-channel transmitter Code: TVEVO868N03 Code: TVEVO868N18 4-channel transmitter 24-channel transmitter Code: TVEVO868N04 Code: TVEVO868N24 7-channel transmitter Ideal for controlling RGB colour strip LEDs and creating scenarios. Code: TVEVO868N07C speed 1 colours 1 colours 2 speed 2 speed 3 pause/play cycle activation colours 1 or 2 selection OFF 7-channel transmitter Ideal for controlling 1 colour LED, 230 Vac light, heating and ventilation. preset 1 preset 2 preset 3 Code: TVEVO868N07D 7-channel transmitter 42-channel transmitter Code: TVEVO868N07 Code: TVEVO868N42 preset 4 increase decrease OFF 42-channel transmitter It is ideal for multi-group commands. With just a touch you can control: pergola slats, lighting, heating, ventilation and RGB scenes. Code: TVEVO868N42P - group selection closing slat + group selection colours 1 colours 2 opening slat 1 opening slat 2 opening slat 3 OPEN colours 1 or 2 selection STOP cycle activation preset 1 - 2 - 3 - 4 increase/decrease CLOSE OFF 118 119 Control systems Wireless transmitter Hand transmitter - MIO Hand transmitter - POD TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2032 Protection rating: IP20 Dimensions: 60 x 30 x 10 mm Power supply: 3V ± 10% Lithium battery: CR2430 Protection rating: IP20 Dimensions: 122 x 42 x 16 mm 2-channel transmitter Black 4-channel transmitter Black Code: TVMIO868P02 Code: TVMIO868P04 3-channel transmitter Open-stop-close function 7-channel transmitter Code: TVTXQ868A03 White Code: TVTXQ868A07 Black Code: TVTXQ868N03 Black Code: TVTXQ868N07 Light sensor control Code: TVTXQ868S03 2-channel transmitter Black and satin-finished aluminium 4-channel transmitter Black and satin-finished aluminium Code: TVMIO868A02 Code: TVMIO868A04 Hand transmitter with support - TXP 18-channel transmitter Open-stop-close function 42-channel transmitter White Code: TVTXQ868A18 White Code: TVTXQ868A42 Black Code: TVTXQ868N18 Black Code: TVTXQ868N42 Wall or table radio transmitter - MOUSE TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2032 Protection rating: IP20 Dimensions: 60 x 30 x 10 mm Power supply: 3V ± 10% Lithium battery: CR2430 Protection rating: IP20 Dimensions: 80 x 80 x 23 mm 1-channel transmitter Glossy-black 2-channel transmitter Glossy-black Code: TVTXP868N01 Code: TVTXP868N02 Control of 1 load 1 pushbutton Control of 2 loads 2 pushbuttons White Code: TVTXM868A01 White Code: TVTXM868A02 Black Code: TVTXM868N01 Black Code: TVTXM868N02 4-channel transmitter Glossy-black Group commands It can manage 4 light scenes Code: TVTXP868N04 White Code: TVTXM868A42 Fixing support included Black Code: TVTXM868N42 120 121 txl r02 (F) Control systems Wireless transmitter Keypad wall transmitters - TXK Recessed transmitters Keypad with a ﬁve-digit access code. 4 commands, 3 of them are encoded and 1 is free. 1 C 2 TECHNICAL SPECIFICATIONS: TXL – for switches Power supply: 230V Protection rating: IP54 Dimensions: 115 x 75 x 32 mm 230 Vac 2-channel transmitter with 12V isolated inputs for switches or domotic systems. txl r02 (F) It is ideal for 55mm diameter electrical boxes. White Code: TVTXK868B04 Power supply: 230 Vac Protection rating: IP20 Dimensions: 54 x 49 x 25 mm txl r02 (F) 57C6 Code: TVTXL868A02 1 C 2 Black Code: TVTXK868A04 Black version TECHNICAL SPECIFICATIONS: 3-channel transmitter Code: TVTXL868A03 4-channel transmitter Code: TVTXL868A04 Timer wall transmitter - CLOCK Wall transmitter with display and timer function to control up to 4 receivers. • Weekly programming up to 6 commands/day • Automated systems and lights are automatically adjusted to the time of dawn and dusk thanks to the astro function with geolocation • Presence simulation TECHNICAL SPECIFICATIONS: Power supply: 2x1.5V AAA Protection rating: IP20 Dimensions: 87 x 87 x 14 mm 1 C 2 Pushbutton input for manual controls 57C6 230 Vac IN Pushbutton input for manual controls 413C 2 230 Vac IN 1 C 2 TXL - for movement sensors Wireless 230 Vac 2-channel transmitter to connect to movement 2 sensors. It is ideal 413C for 55mm diameter electrical boxes. Transmitter with movement sensor - TXS Protective cover for outdoor spaces Pushbutton input for manual controls Code: TVTXC868C04 57C6 2 channel wireless movement sensor with ON/OFF function (IP44). Possible functions: • Light intensity adjustment • Activation distance adjustment • ON/OFF time adjustment 230 Vac IN 230 Vac control input txl b02 Power supply: 6 Vcd (UM-3 AA battery 1.5V x 4) Detecting range: 12m/ 180° ON/OFF time: adjustable from 5 sec. to 5 min. LUX: adjustable from 5 LUX to ∞ Protection rating: IP44 Dimensions: 87 x 125 x 120 mm Power supply: 230 Vac Protection rating: IP20 Dimensions: 54 x 49 x 25 mm Code: TVTXL868R02 57C6 TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Model for modular 1M box Code: TVTXL868R02F txl r02 (F) 413C 2 Code: TVTXS868B02 413C 2 Protective cover for outdoor spaces Code: TXS-KITD txl b02 TXL – battery power supply for switches Wireless 2-channel transmitter for switches or domotic systems. Battery power supply. Compact for simple integration into existing applications. Truly compact for any applications. 1 C 2 txl b02 TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2032 Protection rating: IP20 Dimensions: 45 x 33 x 11 mm Code: TVTXL868B02 Pushbutton input for manual controls 57C6 txl b02 122 123 413C 2 Control systems Wireless transmitter Wall/table radio transmitter (with integrated light sensor) GREEN MOUSE Intelligent lighting anywhere: Green Mouse automatically adjusts the light intensity according to the variation of the natural light, keeping the preset level constant. Single or group commands are possible. Adjustable room brightness control frequency with 5 sec, 30 sec, 1 min, 5 min and 20 min settings. Green Mouse DIMMER Compatible with dimmer receivers. Automatic control of light, via radio. Code: TVTLL868N30 Green Mouse ON/OFF Compatible with ON/OFF receivers. Automatic switching on/off of lights. Code: TVTLL868N01 TECHNICAL SPECIFICATIONS: Power supply: 2x1.5V AAA Protection rating: IP20 Dimensions: 80 x 80 x 23 mm Green Mouse SCREEN Compatible with control units for screens. Automatic adjustment of light intensity by controlling roller shutters, blinds and screens. Code: TVTSL868N30 Screen activation Slat activation GREEN MOUSE Example of Green Mouse Screen system: automatic adjustment of light intensity by controlling roller shutters, blinds and screens. Wall-mounted transmitter (integrated light sensor with dusk/dawn function) EOS Used for automatic control via radio of lights, roller shutters, blinds and screens. The device transmits commands according to the measured light level and the kind of associated receiver. TECHNICAL SPECIFICATIONS: Power supply: 2x1.5V AA Protection rating: IP54 Dimensions: 34 x 125 x 45 mm Code: TVSLC868A01 • ON/OFF for any load and light • OPEN/CLOSE for rolling shutters, awnings and screens • Automatic switching on/off of RGB colours cycle Programmable operating times, from 2 to 8 hours, of the associated receiver. Activation threshold can be configured from 10 to 150 lux. 124 125 ACC Accessories Power supply units 230V IN / 350 mA OUT Power supply unit with 350 mA output. Protection rating: IP20. Transformers 24 Vdc IN/ 350/500/700 mA OUT 6-30Vac-Vdc power supply unit for 1W or 3W LED with built-in constant current regulator. Can be connected from 1 to 6 LED. 6-30Vdc power supply 350 mA version Code: DC-350 220-240Vac. Can be connected up to 7 LED. Maximum power: 9W. Output voltage: 3V - 26V. Code: AL-INL350-9WA 500 mA version Code: DC-500 DC-350/700 Up to 6 LED (350-700 mA) 700 mA version Code: DC-700 220-240Vac. Can be connected up to 15 LED. Maximum power: 18W. Output voltage: 30V - 54V. Code: AL-INL350-18WA DC-350/700 Signal booster 230V IN / 24 Vdc OUT 230V class 2 stabilized power supply unit with 24 Vdc output. RTR 30W (1.25A). IP64. 145x47x30mm Code: AL-24V-30W 100W (4,2A). IP20. 180x88x35.5mm Code: AL-24V-100WA 60W (2.5A). IP64. 181x61.5x35mm Code: AL-24V-60W 150W (6.3A). IP64. 229x68x38.8mm Code: AL-24V-150W 90W (3.75A). IP67. 161x 61x 36mm Code: AL-24V-90W 240W (10A). IP67. 229x68x38.8mm Code: AL-24V-240W 96W (4A). IP64. 200x70.5x35mm Code: AL-24V-96W 320W (4,2A). IP64. 252x90x43.8mm Code: AL-24V-320W Signal booster to increase the transmission range. Signal booster in outdoor container to increase the transmission range. 230V IN / 12 Vdc OUT Power supply: 230 Vac Protection rating: IP20 Dimensions: 95 x 57 x 70 mm TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Protection rating: IP54 Dimensions: 155 x 115 x 74 mm Code: TVRTR868B01 12W (1A). IP20. 85x40.4x22mm Code: AL-12V-12WA 30W (2.5A). IP64. 145x47x30mm Code: AL-12V-30W 60WA (5A). IP20.180x88x35.5mm. Code: AL-12V-60WA 60W (5A). IP64. 181x61.5x35mm. Code: AL-12V-60W 126 TECHNICAL SPECIFICATIONS: Code: TVRTR868A01 RTR for outdoor spaces 230V class 2 stabilized power supply unit with 12 Vdc output. 100V-240Vac. Can be connected up to 3 LED. Maximum power: 3,8W. Output voltage: 3V-10,8V. Code: AL-INL350-4WA Frequency detector RF - DETECTOR Frequency detector for radio signals in 433,92 MHz and 868,3 MHz. Power supply: 9V ± 10% (alkaline battery) Dimensions: 65 x 110 x 25 mm AC Code: RF - DETECTOR 127 Accessories Accessories - Roller shutter doors Accessories - Gates, doors and shared access points Electric Locks TPS - Safety edge Rubber Profile 10 Electric lock with 1 front cylinder and 1 rear cylinder 50 mm long. 10 20 ,9 1,5 ø 10 2 12 Vac power supply Code: ST46-C 5012A ø 10,9 29,5 30 2,5 12 Vdc power supply Code: ST46-C 5012C 12 Vac power supply Code: ST46-C 5024C 2 60 9 2,5 1,5 15 20 Rubber profile h= 30mm (price per meter - 25m reel). Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 20 to 15mm. 14,5 Rubber profile h= 29,5mm (price per meter - 50m reel). Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 14,5 to 9,8mm. Code: TPS-PV154000 8 Code: TPS-PA204001 9,8 Code: TPS-PA257501 3,2 Bumper for safety edge TPS-PV14360 and PV154000 Electric lock with front knob and 1 rear cylinder. 12 Vac power supply Code: ST46-P 0012A 12 Vdc power supply Code: ST46-P 0012C 24 Vdc power supply Code: ST46-P 0024C Rubber profile h= 28mm (price per meter - 50m reel).Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 9,6 to 7,5mm. Code: TPS-PV143601 Bumper for safety edge TPS-PA204001 Code: TPS-OSE-B3516 Bumper for safety edge TPS-PA257501 Code: TPS-OSE-B5518 TPS - photocell with self-balancing adjustment Photocell with self-balancing adjustment with 10,5m cable: • IR transmitter photocell with self-balancing adjustment Diameter: 11,5mm. Maximum range: 10m. • IR receiver with 0,5m cable. Diameter: 11,5mm. Protection rating: IP65. 12 Vac power supply Code: ST46-CA 0012A 12 Vdc power supply Code: ST46-CA 0012C 24 Vdc power supply Code: ST46-CA 0024C Code: TPS-OSE-B3512 14 Code: TPS-ALU2509 24 Vdc power supply Code: ST46-C 9024C Electric lock with front cylinder for automatic gates. 9,6 Aluminium guide (pieces of 2,5m - price per meter) 12 Vdc power supply Code: ST46-C 9012C ø 11 1,3 9 25 12 Vac power supply Code: ST46-C 9012A 2,3 1,5 Rubber profile h= 55mm (price per meter - 22m reel). Profile for mounting on the aluminium guide or on the door profile. Sealing lip, rip-off foot from 25 to 19,5mm. 28 12 Electric lock with 1 front cylinder and 1 rear cylinder 90 mm long. 15,5 19,5 25 3 2,7 9 5,83 2,5 3 3 7,5 Electric lock with front knob for up-and-over doors. 12 Vac power supply Code: ST46-B 0012A 12 Vdc power supply Code: ST46-B 0012C 24 Vdc power supply Code: ST46-B 0024C Electric lock for European profile cylinder (without cylinder). 12 Vac power supply Code: ST46-PE 0012A 12 Vdc power supply Code: ST46-PE 0012C 24 Vdc power supply Code: ST46-PE 0024C Code: TPS-SW12LP Coil Ground plate Counter plates FTC - photocell with obstacle detection system Photocell that detects obstacles within the range of the automation. When it detects an obstacle, the photocell sends a signal to the control unit that stops the movement of the automation for the maximum safety of people and objects. Range: 10mt outdoors. Power supply: 12/24 Vdc. Maximum power at the 24 Vdc relay: 60VA, 30W. Dimensions: 60 x 90 x 25 mm. Code: FTC010A01 12 Vac. Code: Bobina12A TPS - Spiral cable 6.5 m spiral cable with junction box. 128 Code: Inc. a terra Code: Coppia Contr. AC 12 Vcc. Code: Bobina12C Code: TPS-001JB 24 Vcc. Code: Bobina24 129 TAK TAK Access management system Control software PC system The TAK access control system is a highly ﬂexible solution; it allows operation from 1 to 2000 remotely managed transmitters for each receiver. The simple-to-use TAK system allows easy and accurate operations such as: TAK Programmer • adding and/or replacing transmitters • disabling transmitters in case of loss • modifying transmitter channels with no need for actually going to the residential complex where the receiver is installed • extremely safe, the TAK system is equipped with a sophisticated password protection to shield the opening and closing system from any undesired intrusion TAK transmitters to be stored Devices that make up the TAK system: TAK - Receiver TAK - 4-channel 4-channel outdoor receiver with display. Power supply 230 Vac, memory up to 2000 transmitters. Each relay can be programmed with impulsive, ON/OFF or timed output. Code: TAKRCV868A04 Code: TAKMEM2000 12/24V version Code: TAKRCE868A04 2-channel outdoor mini receiver. 12-24 V power supply. Relay with impulsive function. Memory up to 42 users (not programmable). USB programmer receiver transmitter OPTIONAL Accessories: Programmable memory module for 2000 users Code: TAKMEM2000B TAK - Transmitter Power supply: 230 Vac Maximum power at the replay with resistive load: - Constant voltage: 30 Vac - Constant current: 1A Protection rating: IP54 Dimensions: 137 x 96 x 46 mm OPTIONAL Accessories: Programmable memory module for 2000 users TAK - 2-channel PC software downloadable from: www.telecoautomation.com TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vac/dc Maximum power at the replay with resistive load: - Constant voltage: 30 Vac - Constant current: 1A Protection rating: IP54 Dimensions: 60 x 90 x 26 mm Code: TAKRCM868A02 TAK - Hand transmitter Hand transmitter with wall fixing support TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2032 Dimensions: 60 x 30 x 10 mm 1-channel Code: TAK868A01 2-channel Code: TAK868A02 TAK - 2-channel 2-channel mini outdoor receiver. Power supply 12-24 V. Memory up to 2000 transmitters. Relay with impulsive function (programmable). OPTIONAL Accessories: Programmable memory module for 2000 users Code: TAKMEM2000B TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vac/dc Maximum power at the replay with resistive load: - Constant voltage: 30 Vac - Constant current: 1A Protection rating: IP54 Dimensions: 118 x 52 x 25 mm Code: TAKRCM868A04 4-channel Code: TAK868A04 TAK - USB programmer TAK USB programmer to set the memory of the transmitters and receivers. • To be connected to the PC through USB cable • Management via PC by dedicated software (PC software downloadable from www.telecoautomation.com / Reserved Area) • one USB cable and one 230 Vac power supply unit included 130 TAK - Accessories optional TECHNICAL SPECIFICATIONS: Power supply: 24 Vdc Maximum power: 4,5A Protection rating: IP54 Dimensions: 185 x 70 x 56 mm Memory Programmable replacement memory module for 2000 users. For: TAKRCV868A04 / TAKRCE868A04 Code: TAKMEM2000 For: TAKRCM868A02 / TAKRCM868A04 Code: TAKMEM2000B TAK Code: TAKUSB001 131 433 Transmitters and receivers 433 MHz 433 MHz - Transmitters 433 MHz - Receivers TXP - transmitter with fixing support Mini wireless transmitter with wall fixing support. TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2032 Dimensions: 60 x 30 x 10 mm RCM - up to 85 transmitters Receiver with memory to manage up to 85 transmitters. Memory to manage up to 340 1-channel transmitters is available. Impulsive function. 1-channel Code: TXP433A01 Power supply: 12/24 Vac/dc Maximum power at the replay with resistive load: - Constant voltage: 30 Vac - Constant current: 1A Protection rating: IP54 Dimensions: 60 x 90 x 26 mm 2-channel Code: TXP433A02 1-channel Code: RCM434A01 4-channel Code: TXP433A04 2-channel Code: RCM434A02 TXR - hand transmitter RCM - up to 340 transmitters TECHNICAL SPECIFICATIONS: Mini wireless transmitter (2-channel). TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Alkaline battery: CR2032 Code: TXR434A02 Receiver for control units set for the insertion of 4 impulsive relay modules. 1 is inserted and possibility to insert 3 additional ones. Equipped with memory strip up to 85 users; available memory strip up to 340 1-channel transmitters. Power supply 12/24 Vac. OPTIONAL: TECHNICAL SPECIFICATIONS: Power supply: 12/24 Vac Maximum power at the replay with resistive load: - Constant voltage: 30 Vac - Constant current: 1A Protection rating: IP54 Dimensions: 137 x 96 x 46 mm Code: RCE433A01 MC001 Impulsive relay module. TXR - hand transmitter MCTIM Timer relay module. MCMEM Memory relay module. 230V Version Code: RCV433A01 TECHNICAL SPECIFICATIONS: Mini wireless transmitter. Power supply: 3V ± 10% Lithium battery: GP23A 1-channel Code: TXR433A01 2-channel Code: TXR433A02 433 MHz - Antenna Antenna Whip aerial 433MHz with bracket and 3.5m cable. Code: ANT433 4-channel Code: TXR433A04 TXK - keypad transmitter Wireless keypad transmitter with a five-digit access code. 4-channel, 3 of them are encoded and 1 is free. TECHNICAL SPECIFICATIONS: Power supply: 9V ± 10% (Alkaline battery) Protection rating: IP54 Dimensions: 115 x 75 x 32 mm Code: TXK433B04 White version 132 In white Code: TXK433B04WHI 433 133 KIT KIT Easy Outdoor KIT Indoor KIT GardenPro2 F111 Kit Inlumina L201 Kit Consisting of: Consisting of: 1 2 3 1 RCL - 2 outputs 3000W each 110/230 Vac receiver for the ON/OFF control of resistive and infrared heaters up to 3000W each output (1500W each output at 110Vac). Code. TVRCL868A02F6 2 Hand transmitter - MIO 2-channel - Black Code. TVMIO868P02 TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 110/230 Vac 50/60Hz Maximum resistive load: 3000W a 230 Vac (x output) 1500W a 110 Vac (x output) Protection rating: IP54 Dimensions: 205 x 145 x 85 mm Power supply: 3V ± 10% Lithium battery: CR2032 Dimensions: 60 x 30 x 10 mm 1 3 Wall transmitter - INTENSE 2 push-buttons for the control of 1 or 2 loads Code. TVTXI868BB02 1 RRL - 1 relay output up to 1000W 230 Vac receiver with 1 relay output for loads up to 1000W (resistive). Ideal for wall shunt boxes of 55 mm diameter. Compatible with Green Mouse ON/OFF, for automatic room brightness control. Code. TVRRL868GS02 2 TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2430 Dimensions: 86 x 86 x 9,5 mm TECHNICAL SPECIFICATIONS: 2 Hand transmitter - MIO 2-channel - Black Code. TVMIO868P02 TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2032 Dimensions: 60 x 30 x 10 mm Power supply: 230 Vac Maximum power (R): 1000W Protection rating: IP20 Dimensions: 54 x 49 x 25 mm Code: TVLKIT-F111 Outlumina F200 Kit 1 Light Pro4 L511 Kit 1 Consisting of: 2 Code: TVLKIT-L201 1 RCL - 2 16A relay outputs 230 Vac ON/OFF receiver with 2 16A relay outputs for loads up to 2000W each (resistive). It is ideal for outdoor lights and loads.. Code. TVRCL868A02 2 TXS - Movement sensor 2 channel wireless movement sensor with ON/OFF function (IP44). Code. TVTXS868B02 TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 2000W (x output) Protection rating: IP54 Dimensions: 137 x 96 x 46 mm Power supply: 6 Vcd (UM-3 AA battery 1.5V x 4) Detecting range: 12m/ 180° ON/OFF time: adjustable from 5 sec. to 5 min. LUX: adjustable from 5 LUX to ∞ Protection rating: IP44 Dimensions: 87 x 125 x 120 mm Consisting of: 1 RCD - 4 relay outputs up to 3000W each 230 Vac ON/OFF receiver with 4 relay outputs (potential free contact) for loads up to 3000W each (resistive). It is ideal for DIN rail. Code. TVRCD868A04N 2 TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 3000W (x output) Protection rating: IP20 Dimensions: 90 x 87 x 60 mm Code: TVLKIT-F200 2 3 134 2 Hand transmitter - MIO in total 4-channel - Black 230 Vac ON/OFF receiver with 4 Code. TVMIO868P04 outputs, protected by fuse for the control of resistive loads up to 4000W in total. It is ideal for outdoor lights and loads. Code. TVRCL868A60 1 TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum power (R): 2000W (x output)* Maximum power in total: 4000W Protection rating: IP54 Dimensions: 180 x 200 x 79 mm Power supply: 3V ± 10% Lithium battery: CR2032 Dimensions: 60 x 30 x 10 mm (*) The provided fuse (5A) may need replacing. The sum of the 4 connected loads must not exceed 4000W. TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2430 Dimensions: 86 x 86 x 9,5 mm Code: TVLKIT-L511 Heating KIT GardenPro4 F412 Kit Consisting of: 1 RCL - 4 outputs up to 4000W 2 Wall transmitter - INTENSE 2 pieces 4 push-buttons for the control of 2 or 4 loads Code. TVTXI868BB04 Heating T201 Kit 3 Wall transmitter - INTENSE 4 push-buttons for the control of 2 or 4 loads Code. TVTXI868BB04 Consisting of: 1 1 HET - 1 output up to 2000W TECHNICAL SPECIFICATIONS: Power supply: 3V ± 10% Lithium battery: CR2430 Dimensions: 86 x 86 x 9,5 mm Code: TVLKIT-F412 2 2 Hand transmitter - MIO 230 Vac receiver with dimmer function for resistive and infrared heaters up to 2000W. Code. TVHET868B01 4-channel - Black Code. TVMIO868P04 TECHNICAL SPECIFICATIONS: TECHNICAL SPECIFICATIONS: Power supply: 230 Vac Maximum total load: 2000W Protection rating: IP54 Dimensions: 143 x 140 x 55 mm Power supply: 3V ± 10% Lithium battery: CR2032 Dimensions: 60 x 30 x 10 mm Code: TVLKIT-T201 135 Easy KIT Alphabetic index - Model/Code Model/Code Product range Page Model/Code Product range Page Model/Code Product range Page Model/Code Product range Page AL-12V-12WA Power supply units 126 SM0063 Accessories - Shutter/Venetian blind 103 SPLIVQN INTENSE frame 116 TVDLC000A01 Dimmer - R /L /C / LED 230 Vac 32 AL-12V-30W Power supply units 126 SM0063-3 Accessories - Shutter/Venetian blind 103 ST46-B 0012A Accessories - Gates/doors 129 TVDLC868A01 Dimmer - R /L /C / LED 230 Vac 32 AL-12V-60W Power supply units 126 SPLIMQ1S1 INTENSE frame 116 ST46-B 0012C Accessories - Gates/doors 129 TVDMA868A01 Dimmer - 0-10V /1-10V and DALI 40 129 TVDMC000BB01 Dimmer - R /L /C / LED 230 Vac 33 Dimmer - R /L /C / LED 230 Vac 33 AL-12V-60WA Power supply units 126 SPLIMQ2S1 INTENSE frame 116 ST46-B 0024C Accessories - Gates/doors AL-24V-100WA Power supply units 126 SPLIMQ3S1 INTENSE frame 117 ST46-C 5012A Accessories - Gates/doors 129 TVDMC000BB02 AL-24V-150W Power supply units 126 SPLIMQ3S7 INTENSE frame 33/41 ST46-C 5012C Accessories - Gates/doors 129 TVDMC000NN01 Dimmer - R /L /C / LED 230 Vac 33 AL-24V-240W Power supply units 126 SPLIMQ4S1 INTENSE frame 117 ST46-C 5024C Accessories - Gates/doors 129 TVDMC000NN02 Dimmer - R /L /C / LED 230 Vac 33 AL-24V-30W Power supply units 126 SPLIMQ6S1 INTENSE frame 117 ST46-C 9012A Accessories - Gates/doors 129 TVDMC868BB01 Dimmer - R /L /C / LED 230 Vac 33 AL-24V-320W Power supply units 126 SPLIMQ6S8 INTENSE frame 33 ST46-C 9012C Accessories - Gates/doors 129 TVDMC868BB02 Dimmer - R /L /C / LED 230 Vac 33 AL-24V-60W Power supply units 126 SPLIMQ7S1 INTENSE frame 117 ST46-C 9024C Accessories - Gates/doors 129 TVDMC868BB10 Dimmer - 0-10V /1-10V and DALI 41 AL-24V-90W Power supply units 126 SPLIMQS INTENSE frame 116 ST46-CA 0012A Accessories - Gates/doors 129 TVDMC868NN01 Dimmer - R /L /C / LED 230 Vac 33 129 TVDMC868NN02 Dimmer - R /L /C / LED 230 Vac 33 Dimmer - 0-10V /1-10V and DALI 41 AL-24V-96W Power supply units 126 SPLIPQ1B1T INTENSE frame 116 ST46-CA 0012C Accessories - Gates/doors AL-INL350-18WA Power supply units 127 SPLIPQ1N1T INTENSE frame 116 ST46-CA 0024C Accessories - Gates/doors 129 TVDMC868NN10 AL-INL350-4WA Power supply units 127 SPLIPQ2B1T INTENSE frame 116 ST46-P 0012A Accessories - Gates/doors 129 TVDMM868A01S Dimmer - R /L /C / LED 230 Vac 34 AL-INL350-9WA Power supply units 127 SPLIPQ2N1T INTENSE frame 116 ST46-P 0012C Accessories - Gates/doors 129 TVDMM868A01SP Dimmer - R /L /C / LED 230 Vac 34 ANEM4 Accessories - Adjustable slat/Blind 87/96 SPLIPQ3B1T INTENSE frame 117 ST46-P 0024C Accessories - Gates/doors 129 TVDMM868A05 32/63 ANT433 Accessories - 433 MHz 133 SPLIPQ3B7T INTENSE frame 33/41 ST46-PE 0012A Accessories - Gates/doors 129 Dimmer - R /L /C / LED 230 Vac/ Ventilation TVDMM868G08S Dimmer - R /L /C / LED 230 Vac 34 ANT868 Accessories - Adjustable slats 87 SPLIPQ3N1T INTENSE frame 117 ST46-PE 0012C Accessories - Gates/doors 129 TVDMM868G09S Dimmer - R /L /C / LED 230 Vac 32 Bobina12A Accessories - Gates/doors 129 SPLIPQ3N7T INTENSE frame 33/41 ST46-PE 0024C Accessories - Gates/doors 129 Bobina12C Accessories - Gates/doors 129 SPLIPQ4B1T INTENSE frame 117 STL001 Accessories - R /L /C / LED 230 Vac Bobina24 Accessories - Gates/doors 129 SPLIPQ4N1T INTENSE frame 117 TAK868A01 Transmitter - TAK BST24 Accessories - Roller shutter doors 75 SPLIPQ6B1T INTENSE frame 117 TAK868A02 Coppia Contr. Accessories - Gates/doors 129 SPLIPQ6B8T INTENSE frame 33 DC-350 Power supply units 126 SPLIPQ6N1T INTENSE frame 117 DC-500 Power supply units 126 SPLIPQ6N8T INTENSE frame DC-700 Power supply units 126 SPLIPQ7B1T DOORKIT1 Control unit - Roller shutter doors 76 FTC010A01 Accessories - Roller shutter doors GSM700 TVDMM868G10S Dimmer - 0-10V /1-10V and DALI TVEVO868N03 Transmitter - EVO 118 130 TVEVO868N04 Transmitter - EVO 118 Transmitter - TAK 130 TVEVO868N07 Transmitter - EVO 118 TAK868A04 Transmitter - TAK 130 TVEVO868N07C Transmitter - EVO 119 TAKMEM2000 Accessories - TAK 131 TVEVO868N07D Transmitter - EVO 119 33 TAKMEM2000B Accessories - TAK 131 TVEVO868N18 Transmitter - EVO 118 INTENSE frame 117 TAKRCE868A04 Receiver - TAK 131 TVEVO868N24 Transmitter - EVO 118 SPLIPQ7N1T INTENSE frame 117 TAKRCM868A02 Receiver - TAK 131 TVEVO868N42 Transmitter - EVO 118 128 SPLIPQBT INTENSE frame 116 TAKRCM868A04 Receiver - TAK 131 TVEVO868N42P Transmitter - EVO 119 Receiver - GSM control 69 SPLIPQNT INTENSE frame 116 TAKRCV868A04 Receiver - TAK 131 TVGSM000 Receiver - GSM control 68 GSM800 Receiver - GSM control 69 SPLIVQ1B1 INTENSE frame 116 TAKUSB001 USB programmer - TAK 131 TVGSM200 Receiver - GSM control 68 GSM900 Accessories - Roller shutter doors 77 SPLIVQ1N1 INTENSE frame 116 TCSP240C04 Radio Safe - Roller shutter doors Inc. a terra Accessories - Gates/doors 129 SPLIVQ2B1 INTENSE frame 116 TMP150 Accessories - Heaters/Adjustable slats LUX-01 Accessories - Adjustable slat/Blind 87/96 SPLIVQ2N1 INTENSE frame 116 TPS-001JB MC001 Accessories - Wireless control 70 SPLIVQ3B1 INTENSE frame 117 MC001 Accessories - 433 MHz 133 SPLIVQ3B7 INTENSE frame MCMEM Accessories - 433 MHz 133 SPLIVQ3N1 MCTIM Accessories - Wireless control/433MHz 70/133 RAIN101 Accessories - Adjustable slat/Blind RCE433A01 RCM434A01 35 78 41 TVHET868A04 Dimmer - Heaters 57 58/87 TVHET868A06 Dimmer - Heaters 57 Accessories - Roller shutter doors 128 TVHET868B01 Dimmer - Heaters 57 TPS-ALU2509 Accessories - Roller shutter doors 128 TVLKIT-F111 KIT Easy 134 33/41 TPS-OSE-B3512 Accessories - Roller shutter doors 128 TVLKIT-F200 KIT Easy 134 INTENSE frame 117 TPS-OSE-B3516 Accessories - Roller shutter doors 128 TVLKIT-F412 KIT Easy 134 SPLIVQ3N7 INTENSE frame 33/41 TPS-OSE-B5518 Accessories - Roller shutter doors 128 TVLKIT-L201 KIT Easy 135 87/96 SPLIVQ4B1 INTENSE frame 117 TPS-PA204001 Accessories - Roller shutter doors 128 TVLKIT-L511 KIT Easy 135 Receiver - 433 MHz 133 SPLIVQ4N1 INTENSE frame 117 TPS-PA257501 Accessories - Roller shutter doors 128 TVLKIT-T201 KIT Easy 135 Receiver - 433 MHz 133 SPLIVQ6B1 INTENSE frame 117 TPS-PV143601 Accessories - Roller shutter doors 128 TVLRGBD000ST24 Dimmer SLAVE RCM434A02 Receiver - 433 MHz 133 SPLIVQ6B8 INTENSE frame 33 TPS-PV154000 Accessories - Roller shutter doors 128 TVLRGBDU868ST24 Dimmer - Constant voltage LED 18 RCSP240A04 Radio Safe - Roller shutter doors 78 SPLIVQ6N1 INTENSE frame 117 TPS-SW12LP Accessories - Roller shutter doors 128 TVLRGBW000ST25 Dimmer SLAVE 20 RCV433A01 Receiver - 433 MHz 133 SPLIVQ6N8 INTENSE frame 33 TRTXI868BB04 Accessories - Roller shutter doors 77 TVLSRGBWU868ST25 Dimmer - Constant voltage LED 20 RF - DETECTOR Frequency detector 127 SPLIVQ7B1 INTENSE frame 117 TRTXI868NN04 Accessories - Roller shutter doors 77 TVLSTRD868SI24G Dimmer - Constant voltage LED 16 SM0062 Accessories - Shutter/Venetian blind 103 SPLIVQ7N1 INTENSE frame 117 TRTXP868M04 Accessories - Roller shutter doors 77 TVMH868A01 Control with PC or Smartphone 106 SM0062-3 Accessories - Shutter/Venetian blind 103 SPLIVQB INTENSE frame 116 TVANLUX868SWR Accessories - Blinds 96 TVMIO868A02 Transmitter - MIO 120 136 16/18 137 Alphabetic index - Model/Code Model/Code Product range Page Model/Code Product range Page Model/Code Product range Page Model/Code Product range Page TVMIO868A04 Transmitter - MIO 120 TVRGBDSY868B01 Dimmer - Constant current LED 22 TVTXI868BB06L Transmitter - INTENSE 117 TXR433A01 Transmitter - 433 MHz 132 TVMIO868P02 Transmitter - MIO 120 TVRGBDSY868M01 Dimmer SLAVE 22 TVTXI868BB07 Transmitter - INTENSE 117 TXR433A02 Transmitter - 433 MHz 132 TVMIO868P04 Transmitter - MIO 120 TVRGBDSY868N01 Dimmer SLAVE 22 TVTXI868NN01 Transmitter - INTENSE 116 TXR433A04 Transmitter - 433 MHz 132 TVPL4868AC4 Control unit - Screens 95 TVRGBDSY868SL24 Dimmer SLAVE 18 TVTXI868NN01G Transmitter - INTENSE 116 TXR434A02 Transmitter - 433 MHz 132 TVPLA000SC2 SLAVE Control unit 95 TVRGBDSY868ST24 Dimmer - Constant voltage LED 18 TVTXI868NN02 Transmitter - INTENSE 116 TXS-KITD Accessories - R /L /C / LED 230 Vac TVPLA868AC2 Control unit - Adjustable slats 86 TVRGBDU868A01 Dimmer - Constant current LED 21 TVTXI868NN02G Transmitter - INTENSE 116 TVPLA868CC2 Control unit - Adjustable slats 84 TVRGBDU868AD02 Dimmer - Constant current LED 22 TVTXI868NN03 Transmitter - INTENSE 117 TVPLA868SC2 Control unit - Screens 95 TVRGBDU868B01 Dimmer - Constant current LED 21 TVTXI868NN03L Transmitter - INTENSE 117 TVPLD868C80T0 Control unit - Adjustable slats 85 TVRGBDU868BST24 Dimmer - Constant voltage LED 20 TVTXI868NN04 Transmitter - INTENSE 117 TVPLD868C80TS Control unit - Adjustable slats 85 TVRGBDU868DT24 Dimmer - Constant voltage LED 19 TVTXI868NN06 Transmitter - INTENSE 117 TVPLM868C80M2 Control unit - Adjustable slat/Blind 86/94 TVRGBDU868NT24 Dimmer - Constant voltage LED 19 TVTXI868NN06L Transmitter - INTENSE 117 TVPLS868CT0 Control unit - Adjustable slats 84 TVRGBDU868ST24 Dimmer - Constant voltage LED 18 TVTXI868NN07 Transmitter - INTENSE 117 TVPLS868CTS Control unit - Adjustable slats 84 TVRGBW000ST25 Dimmer SLAVE 20 TVTXK868A04 Transmitter - TXK 122 TVPLT868C80T0 Control unit - Adjustable slats/Blinds 85/94 TVRGBW00PSI24 LED CARD - Adjustable slats 88 TVTXK868B04 Transmitter - TXK 122 TVPLT868C80TS Control unit - Adjustable slats/Blinds 86/94 TVRGL868A02 ON/OFF - Indoor lights and loads 47 TVTXL868A02 Transmitter - TXL 123 TVPRD868B01T Control unit - Roller shutters 102 TVRPL868A01P Receiver - Wireless control 71 TVTXL868A03 Transmitter - TXL 123 TVPRH868A01-S Control unit - Roller shutters 101 TVRRL868G02P ON/OFF - Indoor lights and loads 46 TVTXL868A04 Transmitter - TXL 123 TVPRL868A02 Control unit - Sunblinds 94 TVRRL868GS02 ON/OFF - Indoor lights and loads 47 TVTXL868B02 Transmitter - TXL 123 TVPRP868A08R Control unit - Roller shutter doors 75 TVRTR868A01 Signal booster 127 TVTXL868R02 Transmitter - TXL 35/58/63/123 TVPRS868A02 Control unit - Roller shutters 101 TVSLC868A01 Transmitter - EOS 124 TVTXL868R02F Transmitter - TXL 35/58/63/123 TVPRS868A04B Control unit - Screens TVSPOT868ADI04 Dimmer - Constant current LED 21 TVTXM868A01 Transmitter - MOUSE 121 TVPRS868A12 Control unit - Roller shutters 102 TVSPOT868AI01 Dimmer - Constant current LED 21 TVTXM868A02 Transmitter - MOUSE 121 TVPRS868A24 Control unit - Roller shutters 102 TVSPOT868BI01 Dimmer - Constant current LED 21 TVTXM868A42 Transmitter - MOUSE 121 TVPRSD000M02 ON/OFF SLAVE 47 TVSRGBWU868ST25 Dimmer - Constant voltage LED 20 TVTXM868N01 Transmitter - MOUSE 121 TVPRSD868A02 ON/OFF - Indoor lights and loads 47 TVSSH868A01KIT Accessories - Roller shutter doors 77 TVTXM868N02 Transmitter - MOUSE 121 TVPRT868A01T Control unit - Roller shutters 101 TVSTRD00PSI24 LED CARD - Adjustable slats 88 TVTXM868N42 Transmitter - MOUSE 121 TVPRV868A01 Control unit - Venetian blinds 102 TVSTRD868BSI24G Dimmer - Constant voltage LED 17 TVTXP868N01 Transmitter - TXP 120 TVPRV868A24 Control unit - Venetian blinds 102 TVSTRD868DI24G Dimmer - Constant voltage LED 16 TVTXP868N02 Transmitter - TXP 120 TVRCD868A01 ON/OFF - Indoor lights and loads 46 TVSTRD868NT24 Dimmer - Constant voltage LED 17 TVTXP868N04 Transmitter - TXP 120 TVRCD868A04N ON/OFF - Indoor lights and loads 46 TVSTRD868NT27 Dimmer - Constant voltage LED 17 TVTXQ868A03 Transmitter - POD 121 TVRCD868M04 ON/OFF SLAVE 46 TVSTRD868SI24G Dimmer - Constant voltage LED 16 TVTXQ868A07 Transmitter - POD 121 TVRCE868A01 Receiver - Wireless control 70 TVSTRDW868ST24 Dimmer - Constant voltage LED 17 TVTXQ868A18 Transmitter - POD 121 TVRCL868A02 ON/OFF - Outdoor lights and loads 52 TVSVB868A01 Accessories - Blinds 96 TVTXQ868A42 Transmitter - POD 121 TVRCL868A02F6 ON/OFF - Outdoor light/loads/ Heater TVTLL868N01 Transmitter - GREEN MOUSE 124 TVTXQ868N03 Transmitter - POD 121 TVRCL868A60 ON/OFF - Outdoor lights and loads 53 TVTLL868N30 Transmitter - GREEN MOUSE 124 TVTXQ868N07 Transmitter - POD 121 TVRCM868A02 Receiver - Wireless control 70 TVTRX232 Control with PC or Smartphone 107 TVTXQ868N18 Transmitter - POD 121 TVRCM868A2000 Receiver - Wireless control 70 TVTSL868N30 Transmitter - GREEN MOUSE 124 TVTXQ868N42 Transmitter - POD 121 70 TVTXC868C04 Transmitter - CLOCK 122 TVTXQ868S03 Transmitter - POD 121 21/22 TVTXI868BB01 Transmitter - INTENSE 116 TVTXQ868U07 FREELED 21/22 TVTXI868BB01G Transmitter - INTENSE 116 TVTXS868B02 Transmitter - TXS TVTXI868BB02 Transmitter - INTENSE 116 TVVTL868A02 Dimmer - Ventilation TVRCV868A01 TVRGB000M01 Receiver - Wireless control Dimmer SLAVE 95 53/57 23 35/58/122 TVRGB000N01 Dimmer SLAVE TVRGB00PSI24 LED CARD - Adjustable slats TVRGBD000BST24 Dimmer SLAVE 17/20 TVTXI868BB02G Transmitter - INTENSE 116 TXK433B04 Transmitter - 433 MHz 132 TVRGBD000ST24 Dimmer SLAVE 16/18 TVTXI868BB03 Transmitter - INTENSE 117 TXK433B04WHI Transmitter - 433 MHz 132 88 63 TVRGBDMX868AD02 Dimmer - Constant current LED 22 TVTXI868BB03L Transmitter - INTENSE 117 TXP433A01 Transmitter - 433 MHz 132 TVRGBDMX868DT24 Dimmer - Constant voltage LED 19 TVTXI868BB04 Transmitter - INTENSE 117 TXP433A02 Transmitter - 433 MHz 132 Dimmer - Constant current LED 22 TVTXI868BB06 Transmitter - INTENSE 117 TXP433A04 Transmitter - 433 MHz 132 TVRGBDSY868A01 138 35/58/122 139 SALES CONDITIONS PRICE LIST This price list replaces and nullifies all previous price lists. The prices are ex-factory excluding VAT. In all situations the goods travel at the customer’s risk.This price list may undergo variations that will be communicated with at least 15 days notice. PRODUCTS Teleco Automation reserves the ownership of the products delivered to customers until payment of the full contract price, formed by the principal amount and the charges. In case of payment failure of all or part of the agreed price, within the deadline, for any reason, Teleco Automation can, without formalities, regain physical possession of the goods at expense and risk in charge of the customer. In this case, the customer agrees to participate actively at the preparation of an inventory of these products. DELIVERY TERMS Indicatively fixed to 20 working days from our acceptance of your order.Teleco accepts no responsibility for damages due to delays in delivering the goods. DAMAGE CLAIMS Damage claims will only be accepted if they are sent by registered letter within and not later than 8 days after receipt of the goods. GUARANTEE Our products are carefully tried and tested before being placed on the market. Teleco guarantees their products for construction defects and defective materials that are proven to have occurred within 24 months of the production date as indicated on the appliance. The goods must be returned to the factory and all delivery charges are at the customer’s expense. ARBITRAL COLLEGE The Treviso court of law is responsible for all disputes. The enforceable law is the Italian one. TELECO AUTOMATION reserves the right to make changes to their products without prior notice and refuses any responsibility for any possible transcript errors in the price list. 140 Notes Notes 142 143 Italy Teleco Automation S.r.l. Via dell’Artigianato, 16 31014 Colle Umberto (TV) - Italy Phone +39.0438.388511 Fax +39.0438.388536 [email protected] Branches France Teleco Automation France 10 Rue Fulgencio Gimenez Parc Generation 3 69120 Vaulx en Velin - France Phone +33.(0)4.72.14.50.80 Fax +33.(0)4.72.14.05.03 [email protected] Germany Teleco Automation GmbH Hallbergmooser Str. 5 85445 Oberding / Schwaig Deutschland Phone +49.(0)8122.9563024 Fax +49.(0)8122.9563026 [email protected] AUSTRALIA Teleco Automation Oceania Pty Ltd Unit 8, 2 Gateway Circuit Coomera, QLD 4209 Australia Phone +61.(07)5502.7801 [email protected] telecoautomation.com DEP_DE15EN Headquarters

The Lightness Of A Wireless World

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.