Transcript
System Requirements
The SASâ System Release 6.09 Enhanced (TS470) OpenVMSä for VAXä Systems This document provides requirements for installing and running the SAS System for OpenVMS VAX. You must update your system to meet the minimum requirements before running the SAS System. The major requirements listed in the document are: q q q q q
Software Requirements Hardware Requirements Space Requirements Specific Product Requirements Graphics Hardware and Software Compatibility
For additional information and to view the latest system requirements for your system, access the SAS Institute Web site at: http://www.sas.com/service/admin/admindoc.html or contact SAS Institute Technical Support (refer to "Contacting SAS Institute Technical Support" in the installation instructions included in your package). For information about Year 2000 compliance, see http://www.sas.com/techsup/download/technote/y2kcomp.html.
Software Requirements Operating System · ·
OpenVMS VAX, Version 5.5-2 or subsequent versions Motif 1.0 for use with DECwindows/Motif Interface
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 1
September 13, 2002
Hardware Requirements Machines Supported ·
All VAX systems supported by Digital Equipment Corporation that run under the OpenVMS systems listed in the Operating System section
Installation Drives Supported · · ·
9-track (1600 bpi or 6250 bpi) TK50 and TK70 tape cartridge drives CD-ROM
Floating Point Hardware Option ·
Not required
Mouse Support ·
DECwindows and Motif-based systems only
Distribution Media · · ·
9-track tape (1600 bpi or 6250 bpi) TK50 tape cartridge CD-ROM
Memory Requirements · · ·
7.5 MB virtual memory for installation 500 pages working set quota for each user required 4,000 pages working set quota for each user recommended
September 13, 2002
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 2
Space Requirements The media you received is customized for your site and contains all of the SAS software products for which you are licensed. The following list contains space requirements in blocks (512 bytes) for all of the products available with Release 6.09 Enhanced (TS470) of the SAS System for OpenVMS VAX. Use this information to help you determine how much free disk space you must have available before you can install the SAS System. Software Product Installation Procedure Files SAS Index List SETINIT and License Files Miscellaneous Installation Tools Government Notice SAS/ACCESS Interface to INGRES Software Samples SAS/ACCESS Interface to ORACLE Software Samples SAS/ACCESS Interface to Rdb/VMS Software Samples SAS/ACCESS Interface to SYBASE and SQL Server Software Samples Base SAS Software Samples User-Written Extensions ALL-IN-1 Integration of the SAS System CDA Support CDD Engine PROC FSDEVICE Vector Processing Support SAS/AF Software Samples SAS/ASSIST Software SAS/CALC Software SAS/CONNECT Software Samples SAS/EIS Software SAS/ENGLISH Software Samples SAS/ETS Software Samples SAS/FSP Software Samples SAS/GRAPH Software Samples User-Written Extensions Africa and Middle East Maps Asia and Former Soviet Union Maps Europe,Japan,Taiwan,Australia,NZ Maps North America Maps South and Central America Maps Large Canada Maps
File Size 2,974 50 750 1,750 50 450 100 2,550 150 600 150 450 50 52,050 2,900 200 600 200 350 150 150 400 1,900 20,000 5,500 1,150 150 19,400 8,750 800 13,100 550 750 950 22,300 4,100 800 3,400 9,550 16,350 1,450 7150 3,900
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 3
Save Set Size 3,420 92 856 1,980 92 588 136 2,880 180 676 180 588 92 59,040 3,376 228 720 228 408 180 136 452 2,160 22,500 6,212 1,308 180 21,916 9,812 900 14,808 676 856 1,128 25,200 4,860 900 3,828 10,756 18,452 1,668 8100 4,368 September 13, 2002
Software Product Former Soviet Union Maps Continent Maps Map of World Very Large US County Map, Unprojected Large US County Map, Unprojected Large US State Outline Map, Unprojected Large US County Map, Projected SAS/IML Software Samples SAS/INSIGHT Software Samples SAS/LAB Software SAS/OR Software Samples SAS/QC Software Samples SAS/SHARE Software SAS/STAT Software Samples SAS/TOOLKIT Software – Required Files C Component PL/I Component FORTRAN Component SAS/TUTOR Software: Fundamentals of the SAS System (CBT101) SAS/TUTOR Software: Reading Raw Data and Formatting Values with the Data Step (CBT102) SAS/TUTOR Software: Creating, Modifying and Processing Variables with the DATA Step (CBT103) SAS/TUTOR Software: Developing Custom Data Entry Applications (CBT104) SAS/TUTOR Software: Creating and Enhancing SAS/GRAPH Output (CBT105) SAS/TUTOR Software: Creating Tables with PROC TABULATE (CBT106) SAS Notes Patches Danish Version of SAS/AF Software Danish Version of SAS/ASSIST Software Danish Version of the Base SAS System Danish Version of SAS/CALC Software Danish Version of SAS/CONNECT Software Danish Version of SAS/ETS Software Danish Version of SAS/FSP Software Danish Version of SAS/GRAPH Software Danish Version of SAS/OR Software Finnish Version of SAS/AF Software Finnish Version of SAS/ASSIST Software Finnish Version of the Base SAS System Finnish Version of SAS/CALC Software Finnish Version of SAS/CONNECT Software Finnish Version of SAS/ENGLISH Software Finnish Version of SAS/ETS Software Finnish Version of SAS/FSP Software Finnish Version of SAS/GRAPH Software Finnish Version of SAS/OR Software French Version of SAS/AF Software September 13, 2002
File Size 1,550 1,500 6,950 23,400 3,050 2,850 3,050 6,400 1,000 3,900 550 8,050 10,850 1,000 13,350 2,250 600 15,650 3,400 2,200 3,050 4,650 2,000 14,450 6,700
Save Set Size 1,756 1,712 7,832 26,328 3,420 3,240 3,420 7,248 1,172 4,368 632 9,092 12,240 1,216 15,032 2,656 676 17,688 3,960 2,476 3,468 5,312 2,296 16,292 7,560
6,550
7,380
9,950 10,400 6,900 54,229 306 100 35,850 16,650 150 100 350 100 3,600 450 50 32,600 17,200 150 100 100 350 100 3,450 450 100
11,208 11,748 7,788 61,200 405 92 40,368 18,720 180 136 408 136 4,052 496 92 36,720 19,396 180 136 136 408 136 3,872 496 92
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 4
Software Product French Version of SAS/ASSIST Software French Version of the Base SAS System French Version of SAS/CALC Software French Version of SAS/EIS Software French Version of SAS/FSP Software French Version of SAS/GRAPH Software Italian Version of SAS/AF Software Italian Version of SAS/ASSIST Software Italian Version of the Base SAS System Italian Version of SAS/GRAPH Software Italian Version of SAS/FSP Software Norwegian Version of SAS/AF Software Norwegian Version of SAS/ASSIST Software Norwegian Version of the Base SAS System Norwegian Version of SAS/CALC Software Norwegian Version of SAS/CONNECT Software Norwegian Version of SAS/ETS Software Norwegian Version of SAS/FSP Software Norwegian Version of SAS/GRAPH Software Norwegian Version of SAS/OR Software Spanish Version of SAS/AF Software Spanish Version of SAS/ASSIST Software Spanish Version of the BASE SAS System Spanish Version of SAS/FSP Software Spanish Version of SAS/GRAPH Software Swedish Version of SAS/AF Software Swedish Version of SAS/ASSIST Software Swedish Version of the Base SAS System Swedish Version of SAS/CALC Software Swedish Version of SAS/CONNECT Software Swedish Version of SAS/ETS Software Swedish Version of SAS/FSP Software Swedish Version of SAS/GRAPH Software Swedish Version of SAS/OR Software
File Size 34,000 17,300 3,600 9,700 100 3350 50 36,550 14,400 250 100 100 33,650 16,850 150 100 350 100 3400 450 50 25,900 10,850 100 250 50 35,800 16,900 150 100 350 100 3,400 450
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 5
Save Set Size 38,252 19,488 4,052 10,892 136 3780 92 41,088 16,200 272 136 92 37,892 18,948 180 136 408 136 3828 496 92 29,116 12,196 136 272 92 40,320 18,992 180 136 408 136 3,828 496
September 13, 2002
Specific Product Requirements SAS/ACCESS Interface to INGRES Software Products Required: · ·
Base SAS software SAS/ACCESS Interface to INGRES software
Note: SAS/ACCESS Interface to INGRES software supports INGRES, Version 6.3 or subsequent versions
SAS ACCESS Interface to ORACLE Software Products Required: · ·
Base SAS software SAS/ACCESS Interface to ORACLE software
SAS/ACCESS Interface to ORACLE software supports the following ORACLE releases. § §
All production releases of ORACLE, Release 6.0.36 or subsequent releases All production releases of ORACLE7, Release 7.0.13 or subsequent releases
SAS ACCESS Interface to SYBASE and SQL Server Software Products Required: · · ·
SAS/ACCESS Interface to SYBASE and SQL Server software Base SAS software SYBASE Open Client software
Note: SAS/ACCESS Interface to SYBASE and SQL Server software supports SYBASE Open Client 4.2 or higher
SAS ACCESS Interface to Rdb/VMS Software Products Required: · ·
Base SAS software SAS/ACCESS Interface to Rdb/VMS software
Note: SAS/ACCESS Interface to Rdb/VMS software supports Rdb/VMS, Version 4.1 or subsequent versions
September 13, 2002
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 6
SAS/ASSIST Software System Considerations: The SAS/ASSIST product may require SYSGEN parameters and AUTHORIZE quotas larger than the suggested minimums listed in the installation instructions. Please refer to the Installation Instructions and System Manager’s Guide for the SAS System under OpenVMS for VAX Systems, Release 6.09 Enhanced, TS470 and above Section II, Part II “Optimizing System Performance” for recommended values. Particular attention should be paid to the values for the SYSGEN parameters, PROCSECTCNT and VIRTUALPAGECNT, and the value for the AUTHORIZE quota, PGFLQUOTA. The recommended values for running SAS/ASSIST software include: SYSGEN Parameters VIRTUALPAGECNT 64,000 PROCSECTCNT 300 AUTHORIZE Quota PGFLQUOTA Note:
64,000
These values should allow most situations to run. However, specific data configurations may require larger values.
Terminals: · · · · ·
VT1xx VT2xx VT3xx VT1xxx Workstations running DECwindows or Motif
SAS/CALC Software Products Required: · ·
Base SAS software SAS/CALC software
Terminals: · · ·
VT340 Tektronix 4100 and 4200 series terminals Workstations running DECwindows or Motif
System Considerations: The SAS/CALC product may require SYSGEN parameters and AUTHORIZE quotas larger than the suggested minimums listed in the installation instructions. Please refer to the Installation Instructions and System Manager’s Guide for the SAS System under OpenVMS for VAX Systems, Release 6.09 Enhanced, TS470 and above Section II, Part II “Optimizing System Performance” for recommended values. Particular attention should be paid to the values for the SYSGEN parameters, PROCSECTCNT and VIRTUALPAGECNT, and the value for the AUTHORIZE quota, PGFLQUOTA.
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 7
September 13, 2002
The recommended values for running SAS/CALC software include: SYSGEN Parameters VIRTUALPAGECNT 64,000 PROCSECTCNT 300 AUTHORIZE Quota PGFLQUOTA Note:
64,000
These values should allow most situations to run. However, specific data configurations may require larger values.
SAS/CONNECT Software DECNET Access Method: SAS/CONNECT software provides a DECnet access method for use with OpenVMS. Each local and remote process that is running on an OpenVMS system has the TMPMBX and NETMBX privileges. TELNET and TCP/IP Access Methods: SAS/CONNECT software requires one of the following levels of system software to support the TELNET and TCP/IP access methods: · · · · · ·
DEC TCP/IP Services for OpenVMS, Version 2.0 Version 1.3a of VMS/ULTRIX Connection with the latest patch kit from Digital Equipment Corporation’s Customer Support Center or a higher version of VMS/ULTRIX Connection Wollongong’s PathWay Runtime, Release 1.1 TGV’s MultiNet Software with UCX compatibility Process Software’s TCPware for OpenVMS with UCX compatibility Any package that provides an interface that is compatible with DEC TCP/IP Services for OpenVMS, formerly known as UCX
SAS/EIS Software Products Required for Build Mode: · · · · · ·
Base SAS software SAS/AF software SAS/FSP software SAS/GRAPH software SAS/EIS software Other products may be required depending on the application
Products Required for Run Mode: · · · ·
Base SAS software SAS/GRAPH software SAS/EIS software Other products may be required depending on the application
September 13, 2002
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 8
Terminals: · · ·
VAXstations X-terminals VT1xxx DECwindows terminals
System Considerations: The SAS/EIS product may require SYSGEN parameters and AUTHORIZE quotas larger than the suggested minimums listed in the installation instructions. Please refer to the Installation Instructions and System Manager’s Guide for the SAS System under OpenVMS for VAX Systems, Release 6.09 Enhanced, TS470 and above Section II, Part II “Optimizing System Performance” for recommended values. Particular attention should be paid to the values for the SYSGEN parameters, PROCSECTCNT and VIRTUALPAGECNT, and the value for the AUTHORIZE quota, PGFLQUOTA. The recommended values for running SAS/EIS software include: SYSGEN Parameters VIRTUALPAGECNT 64,000 PROCSECTCNT 300 AUTHORIZE Quota PGFLQUOTA Note:
64,000
These values should allow most situations to run. However, specific data configurations may require larger values.
SAS/ENGLISH Software Products Required: · Base SAS software · SAS/ASSIST software · SAS/ENGLISH software · Other products may be required depending on the application
SAS/INSIGHT Software Products Required: · ·
Base SAS software SAS/INSIGHT software
Terminals: ·
Workstations running DECwindows or Motif
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 9
September 13, 2002
System Considerations: The SAS/INSIGHT product may require SYSGEN parameters and AUTHORIZE quotas larger than the suggested minimums listed in the installation instructions. Please refer to the Installation Instructions and System Manager’s Guide for the SAS System under OpenVMS for VAX Systems, Release 6.09 Enhanced, TS470 and above Section II, Part II “Optimizing System Performance” for recommended values. Particular attention should be paid to the values for the SYSGEN parameters, PROCSECTCNT and VIRTUALPAGECNT, and the value for the AUTHORIZE quota, PGFLQUOTA. The recommended values for running SAS/INSIGHT software include: SYSGEN Parameters VIRTUALPAGECNT 64,000 PROCSECTCNT 300 AUTHORIZE Quota PGFLQUOTA Note:
64,000
These values should allow most situations to run. However, specific data configurations may require larger values.
The Graphics Editor Products Required: · ·
Base SAS software SAS/GRAPH software
Terminals: ·
Workstations running DECwindows or Motif
System Considerations: The Graphics Editor may require SYSGEN parameters and AUTHORIZE quotas larger than the suggested minimums listed in the installation instructions. Please refer to the Installation Instructions and System Manager’s Guide for the SAS System under OpenVMS for VAX Systems, Release 6.09 Enhanced, TS470 and above Section II, Part II “Optimizing System Performance” for recommended values. Particular attention should be paid to the values for the SYSGEN parameters, PROCSECTCNT and VIRTUALPAGECNT, and the value for the AUTHORIZE quota, PGFLQUOTA. The recommended values for running the Graphics Editor include: SYSGEN Parameters VIRTUALPAGECNT 64,000 PROCSECTCNT 300 AUTHORIZE Quota PGFLQUOTA Note:
64,000
These values should allow most situations to run. However, specific data configurations may require larger values.
September 13, 2002
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 10
SAS/LAB Software Products Required: · · · ·
Base SAS software SAS/GRAPH software SAS/LAB software SAS/FSP software is recommended but not required
Terminals: · · · · ·
Workstations running DECwindows or Motif VT286 VT340 TEK4105 TEK4205
Note: Emulators of the above terminals should also work, but a trial period is highly recommended. System Considerations: The SAS/LAB product may require SYSGEN parameters and AUTHORIZE quotas larger than the suggested minimums listed in the installation instructions. Please refer to the Installation Instructions and System Manager’s Guide for the SAS System under OpenVMS for VAX Systems, Release 6.09 Enhanced, TS470 and above Section II, Part II “Optimizing System Performance” for recommended values. Particular attention should be paid to the values for the SYSGEN parameters, PROCSECTCNT and VIRTUALPAGECNT, and the value for the AUTHORIZE quota, PGFLQUOTA. The recommended values for running SAS/LAB software include: SYSGEN Parameters VIRTUALPAGECNT 64,000 PROCSECTCNT 300 AUTHORIZE Quota PGFLQUOTA Note:
64,000
These values should allow most situations to run. However, specific data configurations may require larger values.
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 11
September 13, 2002
SAS/SHARE Software DECNET Access Method: SAS/SHARE software provides a DECnet access method for use with OpenVMS. Each local and remote process that is running on an OpenVMS system has the TMPMBX and NETMBX privileges. TCP/IP Access Method: SAS/SHARE software requires one of the following levels of system software to support the TCP/IP access methods: · · · · · ·
DEC TCP/IP Services for OpenVMS, Version 2.0 Version 1.3a of VMS/ULTRIX Connection with the latest patch kit from Digital Equipment Corporation’s Customer Support Center or a higher version of VMS/ULTRIX Connection Wollongong’s PathWay Runtime, Release 1.1 TGV’s MultiNet Software with UCX compatibility Process Software’s TCPware for OpenVMS with UCX compatibility Any package that provides an interface that is compatible with DEC TCP/IP Services for OpenVMS, formerly known as UCX
September 13, 2002
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 12
Graphics Hardware and Software Compatibility Printers SAS/GRAPH software provides device drivers for all Hewlett-Packard printers (and compatibles), and printers that support PostScript, HP-GL, HP PCL, and other printer languages. Here is a partial list of printers that SAS/GRAPH software supports: CalComp ColorMaster, ColorMaster Plus, PlotMaster Canon Bubble Jet, Laser Shot Digital printers which support either SIXEL, HP PCL, Tektronix, or PostScript emulation modes Epson FX and LQ series printers (and all printers running in Epson emulation mode) Hewlett-Packard LaserJet, DeskJet, PaintJet, ThinkJet, and DesignJet printers (and compatibles) IBM Graphics, Proprinter, and ColorJet printers PostScript printers (including color and gray-scale PostScript printers) QMS Colorgrafix with CGM interpreter QMS 800, 1200, 1500, 2200, and 2400 using QUIC or Tektronix emulation modes Talaris 800, 802, 1200, 1500, and 2400 using QUIC or Tektronix emulation modes Talaris printers using the EXCL language Tektronix Phaser printers (all models) Tektronix 4695, 4696, 4697 (ColorQuick) Tektronix 4691, 4692 and 4693 printers with Tektronix 4510 rasterizer Xerox 2700 and 4045 printers with a GRAPHX cartridge Xerox 3700 (with imaging board and at least 1M of memory) Xerox 4030 (contact Technical Support), 4213, 4235, and 4700 Xerox 4700 printer Xerox 5775 color copier with an EFI Fiery attachment SAS/GRAPH device drivers may also be available for additional printers not listed above and that do not support PostScript, HP-GL, or HP PCL. Contact SAS Institute Technical Support for additional information on these drivers.
Terminals and Displays SAS/GRAPH software supports graphics display on graphics terminals from DEC, Tektronix, HP, and on X Windows terminals. SAS/GRAPH software also supports graphics emulators that emulate any of the above terminals. Note the use of the SAS/GRAPH graphics editor requires an X Windows display or X Windows emulation software.
Plotters SAS/GRAPH software provides device drivers for all HP plotters supporting HP-GL or HP-GL/2, and plotters from other manufacturers that support the HP-GL or HP-GL/2 language. SAS/GRAPH software also supports Houston Instruments plotters using the DMPL language and ZETA plotters that support the GML language.
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 13
September 13, 2002
Film Recorders SAS/GRAPH software provides device drivers that support the following film recorders: General Parametrics Videoshow display system Genigraphics Masterpiece Camera System with SCODL interface Lasergraphics MPS 2000 film recorder with a Lasergraphics UI-100 or RASCOL rasterizer Matrix QCR and PCR cameras with Matrix QVP, MVP, or Lasergraphics rasterizers Polaroid Palette CI-3000 and CI-5000 Presentation Technologies Montage film recorder Support may be available for other film recorders not listed here. Contact SAS Institute Technical Support for details.
Interfaces to Other Graphics Software Included with SAS/GRAPH software is a series of drivers that can produce Computer Graphics Metafiles (CGM) in binary, character, and clear-text formats. These drivers can be used to transfer SAS/GRAPH output to other products that support CGM input, such as Word for Windows, WordPerfect for Windows, Harvard Graphics, and Lotus Freelance, or to devices that can process CGM input. SAS/GRAPH software can also generate encapsulated PostScript vector files, which can be exported to word processing packages such as Microsoft Word, WordPerfect, and several others. Many other graphics and word processing applications can process files in Hewlett-Packard (HP-GL) format. The HPGL driver can be used to produce files that can be transferred to most applications that can process HP-GL files. SAS/GRAPH software can also export graphics in the following formats: BMP - Microsoft Windows Bitmap EPS - Encapsulated PostScript GIF - Graphics Interchange Format PDF - Adobe Acrobat, Version 3.0 Portable Document Format PPM - Portable Pixmap PS - PostScript Bitmap TIF - Tagged Image File Format XPM - X11 Pixmap JPG - JPEG Files XBM - X11 Bitmap In addition, SAS/GRAPH software can import graphics in the following formats: BMP - Microsoft Windows Bitmap EPS - Encapsulated PostScript GIF - Graphics Interchange Format PBM - Portable Bitmap PCX - PC PaintBrush PGM - Portable Graymap PNM - Portable Anymap PPM - Portable Pixmap TGA - Targa format TIF - Tagged Image File Format XBM - X11 Bitmap XPM - X11 Pixmap XWD - X Window Dump JPG - JPEG Files September 13, 2002
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 14
Writing Your Own Device Driver SAS Institute's Metagraphics driver facility can be used to develop driver support for virtually any device you choose. The Metagraphics driver facility is device-intelligent and supports most hardware features. A user-written program is required to translate the metafile into the appropriate graphics language recognized by the hardware. SAS/GRAPH software will, optionally, perform device I/O. Contact SAS Institute Technical Support for details.
The Macintosh Meta Application The Macintosh Meta Application is a free program that can be installed on your Macintosh. A metafile produced by the SAS/GRAPH Metagraphics driver can be transferred to the Macintosh from your host system and viewed on the screen. Images can then be stored in PICT or clipboard format to be used by other applications or printed on an attached Apple LaserWriter (or compatible) printer. Images can be saved into the Macintosh clipboard and used by MacDraw and other Macintosh packages. Contact SAS Institute Technical Support for details.
SAS and all other SAS Institute product or service names are registered trademarks or trademarks of SAS Institute in the USA and other countries. â indicates USA registration. Other brand and product names are registered trademarks or trademarks of their respective companies. Copyright (c) 1999 SAS Institute Inc. Cary, NC, USA. All rights reserved.
The SAS System, Release 6.09 Enhanced (TS470), OpenVMS for VAX Systems 15
September 13, 2002
