Transcript
ANNEX A
Nai Solutions SAL Custom Electronic System Book of Specifications Introduction: The system as a whole unit, will act as a power bank, which has input and output ports, in addition to an OLED screen which will display information about battery and a bluetooth module status which will be also integrated in the system. Item
Unit
Position
Appearance
Quantity
Switch Button 1
Unit #1
Left of screen
With RED LED
1
OLED Screen
Unit #1
Middle
BLUE WHITE
1
xxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxx
xxxxxxxxx
xxxxxxxxxx
xxxxx
Switch Button 2
Unit #1
Right of screen With BLUE LED
1
LED indicator
Unit #2
Far Left
Green
1
xxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxx
xxxxxxxxx
Orange
xxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxx
xxxxxxxxx
USB port 1 - output
Unit #2
Middle
USB port 4 - input
Dimensions Dimensions (TOP) (HOLE)
Capacity
Weight
xxxxxxxxxx
Voltage Out
Voltage In
Brand
Origin
xxxxxxxxxx
Method of Use Switch BT module off. Other modules must be working normally Displays info about battery life, status of BT module [corners]
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxx
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
Orange light: battery input plugged in, battery not full
Red
xxxxx
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
Red light [BLINK]: battery output is being used, battery level is low
Visible
3
xxxxxxxxxx
Power output
Unit #2
Right to output ports Visible
1
xxxxxxxxxx
Power input to charge the batteries
Battery
Unit #3
xxxxxxxxx
Hidden
Bluetooth Module
Unit #3
xxxxxxxxx
Hidden
1
xxxxxxxxx xxxxxxxxx
Memory Slot
Unit #3
xxxxxxxxx
Hidden
1
xxxxxxxxx xxxxxxxxx
Memory Card
Unit #3
xxxxxxxxx
Hidden
1
xxxxxxxxx xxxxxxxxx
Buzzer
Unit #3
xxxxxxxxx
Hidden
1
xxxxxxxxx xxxxxxxxx
Swich the system off. Cuts power off screen, bluetooth module, battery module. All circuits must be cut off Green light: battery input plugged in, battery is full
xxxxxxxxx xxxxxxxxx
Main power source A mobile device will connect to the BT module, using a smart app which will be developed, in order to use proximity. The BT Module is expected to be broadcasting its signal when it is powered on. xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
On The Go access: Plug and Play for smartphones (and PCs of course). Must support upgrade for bigger volumes.
64 GB
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
On The Go access: Plug and Play for smartphones (and PCs of course)
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
This buzzer will be tirggered by mobile app. The user can click a certain button to cause the buzzer to beep, and therefore reveal the location of the object.
Dimensions must be in millimeters Electricity in Volts and Amperage Enclosures of different system units must be in black
1. Arduino nano https://www.amazon.com/Gikfun-ATmega328-Micro-controller-Arduino-Ek1620x1/dp/B00Q9YBO88/ref=sr_1_1?ie=UTF8&qid=1494493894&sr=8-1&keywords=Arduino+Nano+with+ATMEGA328 2. HM-10, bluetooth device https://www.amazon.com/CC2541-Bluetooth-Transceiver-Central-Switching/dp/B00XRRO9N2/ref=sr_1_fkmr0_4?ie=UTF8&qid=1494494018&sr=8-4-fkmr0&keywords=BLE+Bluetooth+4.0+Uart+Transceiver+Module+CC2540+CC2541+KG428 3. USB type A https://www.amazon.com/Uxcell-Female-Socket-Connector-Pieces/dp/B00H51ELMU/ref=sr_1_2?ie=UTF8&qid=1494494100&sr=8-2&keywords=USB+Type-A+Female+PCB+Mount+Socket+4PIN+Connector 4. USB type A 2 port
2-Ports USB Type A is the charging unit (Battery Output). Single port is for memory access (Mobile Phone On The Go)
5. USB micro https://www.amazon.com/XO-Lithium-Battery-Batteries-Charging/dp/B01N6XEX51/ref=sr_1_fkmr0_2?ie=UTF8&qid=1494494468&sr=8-2-fkmr0&keywords=Micro+USB+Lithium+Battery+Charger+TP4056+Li+Ion+LiPo+5V+1A+with+Protection+Chip 4. OLED display https://www.amazon.com/VKmaker-Design-Yellow-Display-Communicate/dp/B01D8DJXZS/ref=sr_1_2?ie=UTF8&qid=1494494592&sr=8-2&keywords=yellow+blue+0.96+inch+OLED+module+New+128X64+OLED+LCD+LED+Display+Module 5. LED switch button
Displays the word [HELLO] in the middle full size of screen
Please note different colors of both LED Buttons. Check the table above for more details.
https://www.amazon.com/Plastic-Momentary-Button-Switch-Waterproof/dp/B01KYJ1GLI/ref=sr_1_1?ie=UTF8&qid=1494494829&sr=8-1&keywords=Generic+Plastic+LED+Momentary+22mm+Push+Button+Switch+12V+SPST+Waterproof+-+green 6. Dual USB charger https://www.amazon.com/ROMOSS-20000mAh-External-Portable-Indicator/dp/B01MQ4PJFJ/ref=sr_1_fkmr2_2?ie=UTF8&qid=1494495209&sr=8-2-fkmr2&keywords=Romoss+Solo+6+PH80+16000mAH+Power+Bank+%28White%29 7. Card Holder / Micro SD Slot https://www.amazon.com/SMAKN-Reader-Module-Interface-Socket/dp/B00VFH0YS0/ref=sr_1_fkmr0_1?ie=UTF8&qid=1494495374&sr=8-1-fkmr0&keywords=Micro+SD+Card+Module+Slot+Socket+Reader+KG072 Important Note The choice of components is related to functionality. If exact brands are not available, we can use alternatives with same functionality and purpose.
