Transcript
Thermax AF2 Home Environment Cleaning System
Owner’s Manual
For a Healthier Indoor Environment www.thermaxaf.com 1-888-764-3700
Table of Contents A Message from the Corporate Office.............................................1 Safety Instructions..........................................................................2 Identifying Features........................................................................3 Use as an Air Purification System...................................................4 Vacuuming Instructions.................................................................5 Vacuuming Tips.............................................................................6 Steam Cleaning Instructions-Set up...............................................7 Steam Cleaning Operational Instructions.......................................8 Steam Cleaning Tips......................................................................9 Picking Up Liquids/Wet Pickup...................................................10 Carpet Maintenance Program.......................................................11 Secondary Filtration System, Instructions & Information............12 Motorized Power Nozzle Service...................................................13 Parts List – Canister & Recovery Tank Assembly..........................14 Parts List – Wand, Floor Tool & Vacuum Hose............................15 Parts List – Steam Cleaning Accessory..........................................16 Optional Dry and Wet Accessories...............................................17 Cleaning Solutions.......................................................................18 Commercial Product Line Selection.............................................19 Trouble Shooting Tips..................................................................20 Specifications................................................................................21 Warranty......................................................................................22
A Message from the Corporate Office Dear Thermax Owner: Congratulations on the purchase of your new Thermax AF2 Home Environment Cleaning System! In 1971, Carl Parise developed the world’s first UL approved carpet steam cleaner for the U.S. market, and has since produced over 500,000 units sold worldwide. You have seen many of our commercial machines for rent in grocery and hardware stores across the country. We have adopted our own brand name, Thermax, which is rapidly becoming a household name, synonymous with the industry. Through our experience as the pioneers of the do-it-yourself carpet cleaner rentals, along with years of field research and development, we have created what we believe to be the most advanced, complete and versatile home environment cleaning system ever developed. Designed for the rigorous cleaning demands of today’s modern household environment, the Thermax AF is the solution to help attain a healthier indoor environment by keeping the carpets, floors and upholstered furniture clean and free of allergens and unhealthy contaminants! AF’s insignia has a three-fold punch! It is defined as 1) Aqua Filter for our patented hydropneumatic (water and air interaction) water filtration system, 2) Allergy Filter for either our standard high-efficiency reusable secondary urethane foam filter or our electrostatically charged 100% efficient disposable allergy filter, and 3) Allergy Free. All this high efficiency leads to a dust-free, allergy-free operation, trapping the contaminants and allergens within the system for easy disposal. Thank you for joining the ever-growing family of Thermax owners. Here’s to many years of use and, most importantly, here’s to a healthier indoor environment for you and your family. Sincerely, Jason Davis
Todd Walker, CFO, Jason Davis, CEO, and Mark Rodie, COO
Important Safety Instructions Read before operating this system.
WARNING
To reduce the risk of fire, electric shock or injury:
1. Always disconnect the canister and optional steam cleaning solution tank accessory from the power source BEFORE servicing. 2. Never leave the appliance plugged into power source unattended. 3. Never use the motorized dry vacuum head on wet surfaces. 4. Do not allow this product to be operated by children, it is not a toy. 5. Only use this product as described in this manual. 6. Only use factory recommended attachments and cleaning solutions. Failure to do so will void the warranty. 7. Never use with a damaged power cord, plug, or electrified vacuum hose. Have it replaced immediately. 8. Do not leave the power cord or canister near a heat source. 9. Do not pull the canister by the power cord. 10. Hold power cord by the plug when retracting into canister, do not allow to whip back into canister. 11. Grasp plug when un-plugging from power source, DO NOT pull by the cord itself. 12. Do not handle the canister, plug or power cord with wet hands. 13. Never use this machine to suck up hot objects, such as cigarette butts, smoldering ashes or matches. 14. Never suck up flammable or combustible substances. Never use this product in areas that contain such. 15. Do not use this product without the recommended water level in the recovery tank. 16. Use extra care when cleaning stairs. The canister should not be left to sit on stairs. 17. The components used in this product may be sensitive to oil, grease and other petroleum-based products. Avoid contact by these types of products with the canister components. 18. Keep canister on floor when in use. 19. Store canister and optional steam cleaning solution tank in a dry, clean place. Do not expose to sunlight, directly or indirectly. 20. This appliance is for normal household use only. Any indication of negligence of this appliance will void the warranty. 21. Clean the appliance with a mild dish soap solution and soft cloth. Never use abrasive or caustic cleaning agents. 22. The recovery tank lid (green) should never be placed in the dishwasher for cleaning. 23. All other clear plastic recovery tank parts are dishwasher safe. 24. Keep steam cleaning solution tank with built in pump (optional) on canister when in use. Save these instructions! To find your nearest authorized service center: call 888-764-3700 or email
[email protected]
For more information Forormore to place information an order or visit to www.thermaxaf.com place an order visit www.thermaxaf.com
Identifying Features STANDARD THERMAX AF2 1. Rear lid with on-board tool holder 2. Carry Handle 3. Power Switch (Cord reel actuator, opposite side) 4. Main Canister 5. Electrified Vacuum Hose 6. Hose Connector 7. Cord Outlet 8. AQUA BLUE Air Freshener/Deodorizer (8oz.) 9. Mulberry 10. Eucalyptus/Menthol 11. Telescopic Stainless Steel Wand 12. Motorized Dry Vacuum Head 13. Water Filtration Recovery Tank 14. Front Lid with filter retainer 15. Electrostatic Allergy Filter, 2 pack 16. Foam Core Filter 17. Urethane Foam Filter 18. Hard Floor Tool 19. Instructional Manual 20. Instructional DVD 21. Upholstery Tool with slide on Brush 22. Dusting Tool 23. Crevice Tool
2
14
1
17 13
4
8 12
3
7
9
10
16
21
18
23
22
5 15
6
20 11 19
4
The OPTIONAL STEAM CLEANING ACCESSORY Kit (32-030-121) does not come standard with your AF2. Contact your local Distributor or the corporate office to receive details on purchasing or receiving it free through our referral program (see page 17 for other accessories that complete this kit): 1. Steam Cleaning Solution Tank with Built in Pump 2. Steam Head 3. Valve and Hose Assembly 4. Liquid Carpet & Upholstery Cleaner (16oz.)
1
For more information or to place an order call 1-888-764-3700
3
2
1
To Use as an Air Purification System Your Thermax AF2 Home Environment Cleaning System filters the air around you with its patented hydropneumatic filtration system, washing the impurities from your indoor environment. Airborne dust particles are a big source of allergy and respiratory related problems. A dust-free environment is a healthier environment.
2-3
4
To Use as an Air Purifier: 1. Remove the Water Filtration Recovery Tank and fill with clean water to the required level indicated on the tank. 2. Be sure the two secondary filters are in place. 3. Install recovery tank, making sure the 2 arrows are pointing towards the front. 4. Close and latch the front lid. 5. Place machine as close to the center of the room as possible. 6. Plug into the proper wall outlet and turn on the power switch. The Thermax AF2 is now washing the air of impurities. Run for approximately ten (10) minutes per room, or 1 hour centrally located in your home, preferably by the central A/C intake. Run your AF2 this way about twice a week, depending on the severity of your allergies.
To Use as a Deodorizing & Sanitizing System:
8
7. Set the canister up in the air purification system mode (see above). 8. After filling the recovery tank with water to the proper level, add Aqua Blue Deodorizer Air Freshener or Valley Fresh as indicated on its label to deodorize & sanitize the air, removing any smoke, cooking odors, and pet odors, leaving the air clean, fresh & sanitized. 9. Run the canister until the room has reached the desired level of air freshness or when air wash process is complete.
To Use as an Aromatic/Inhalation System:
11
10. Set the canister up in the air purification system mode (see above). 11. After filling the recovery tank with water to the proper level, add a 10 drops of our eucalyptus w/menthol inhalant for therapeutic inhalation purposes, or a 10 drops of one of our aromatic fragrances, depending on what purpose you wish to accomplish. 12. Run the canister until the room has reached the desired level of inhalant or fragrant scent or when air wash process is complete. The Thermax AF2 virtually creates an invisible rainstorm within the surrounding environment, washing the air and leaving it pure and fresh. Any of the fragrances or Aqua Blue can be added to the filtration water during vacuuming for the desired effect. For more information or to place an order visit www.thermaxaf.com
Vacuuming Instructions
1
1. Fill Water Filtration Recovery Tank to the fill line as noted on the label and make sure the filter tube, filter chamber & baffle shut off assembly are all in place. 2. Add Aqua Blue or fragrance to water as indicated on its label if desired.
3. Replace the recovery tank into the canister, making sure the 2 arrows are pointing towards the front.
3
4. Close and latch the front lid.
5. Connect the vacuum hose: insert hose connector into front lid by aligning the gold stripe on the hose end with the gold arrow on the hose lock (located on the front lid). Hose lock must be on top as shown. After inserting, twist the hose lock 1/4 turn clockwise to secure into place. 6. To connect vacuum hose power cord into canister, plug into receptacle cord outlet as shown. NOTE: This plug is polarized and will only go in one way.
5-6
7
7. To connect the vacuum hose to the sliding wand, insert handle end into the wand and gently twist until the button snaps into place.
8. To connect your motorized dry vacuum head (or the floor tool), insert the sliding wand into the wand connector (located on the motorized power nozzle) and push until button snaps into place.
9. Snap power cord from the motorized power nozzle into the two cord guides located on the wand, leaving excess cord slack looped at the motorized dry vacuum head.
8
9
10
10. Plug in the cord from the motorized dry vacuum head into the vac hose handle as shown. NOTE: This plug is polarized and will only go in one way.
For more information or to place an order call 1-888-764-3700
11
Vacuuming Instructions continued…
11. Pull out the main power cord and plug into electrical outlet. The cord will stop at any location you desire when pulling it out. To retract, depress the cord reel actuator and cord will start to retract. Hold the power cord by the plug when retracting into the canister. DO NOT allow the cord to rapidly whip back into the canister.
on board attachments 12. The upholstery tool with slide on brush, the dusting tool with brush and crevice tool are stored on board on the rear lid and can fit on either the end of the hose handle or the sliding wand. 12
13. The hard floor tool can easily fit on the end of the sliding wand, finally taking the place of traditional brooms, mops and dustpans. 13
14
14. Depress the power switch actuator to turn on the vacuum, and begin vacuuming.
Vacuuming Tips • When vacuuming, periodically check the Water Filtration Recovery Tank to see that the tubes are not blocked with debris. This may happen with the first several vacuumings, with new carpet or if you have a pet that sheds often. If this occurs, stop and empty the Water Filtration Recovery Tank. Refill the tank and continue vacuuming. NOTE: If water stops flowing on side of recovery tank during vacuuming, clean out filtration tubes and empty recovery tank. • Be sure both filtration tubes are in place for proper filtration. • Periodically you will need to check the black urethane foam or electrostatic filter located in the front lid of the machine. If it becomes clogged with debris, it needs to be cleaned with warm soapy water or replaced. How often it needs to be cleaned depends on use and how dirty the areas are that you are cleaning (see page 12 for more details). • It is recommended that you replace both foam filters once a year to maintain its 99.99% filtration efficiency. • Thoroughly clean filter tubes and tank after each use. This will prevent odor and mildew. The recovery tank lid (green) should never be placed in the dishwasher for cleaning. All other clear plastic recovery tank parts are dishwasher safe. • Once you remove the initial build up (6-8 weeks of cleaning), you should be able to clean your entire home with one filling of water.
For more information or to place an order visit www.thermaxaf.com
Steam Cleaning Instructions-Set Up 1. Be sure switch is off and canister is unplugged. 2. Remove the recovery tank from the canister and remove the inner tube. This is accomplished by twisting the tube slightly and lifting. The larger outer tube must remain in the tank. When steam cleaning you DO NOT put water in the recovery tank.
2
3. Replace recovery tank, close and latch front lid. 4. Remove twist cap from the Steam Cleaning Solution Tank. Add two ounces of Thermax Liquid Carpet & Upholstery Cleaner and then fill with hot tap water. Replace the cap and shake the solution tank to thoroughly mix the cleaner.
4
5
5. Open the rear lid of the canister and place the solution tank on the top of the canister.
6
6. Plug the power cord from the solution tank into the cord outlet.
7
7. Connect the vacuum hose end to the hose lock and connect the vacuum hose handle to the sliding wand by inserting the handle end into the wand and gently twist until the button snaps into place.
8
8. Attach the steam head to the end of the telescopic stainless steel wand.
For more information or to place an order call 1-888-764-3700
Steam Cleaning Instructions-Set Up continued
9
9. Snap trigger valve bracket onto handle as shown.
10
10. Connect the hose from the steam head into the spray valve.
11
11. Connect the end of the trigger solution hose into the solution tank fitting.
Steam Cleaning Operational Instructions
7
1. With the power switch on, place the steam head about three feet in front of you. 2. Depress the trigger to spray solution and slowly pull the steam head toward you, while applying slight down pressure. 3. At the end of each backward stroke, release the trigger and push the wand and the recovery head assembly back and forth over the same area several times, using moderate pressure to remove as much solution from the carpet as possible. Use the clear view recovery head as a visual indicator to let you know when the carpet is clean and when as much solution as possible has been removed from the carpet. 4. Overlap ½˝ and move on to the next section of carpet and repeat steps 1-3 until cleaning is complete. 5. When the spray from the solution hose gets weak and/or the pump starts making a loud noise, it is an indication the solution tank is out of solution. Turn off the machine and refill the solution tank as directed. It is also recommended the recovery tank be emptied at the same time. Replace both tanks and continue cleaning. 6. It is recommended that carpet be cleaned at least twice a year and more often in high traffic areas. 7. To use the optional Hand Wand, simply attach it to the end of the vac hose and connect the hose to the trigger valve. Fill tanks as described above and proceed.
For more information or to place an order visit www.thermaxaf.com
Maintenance and Cleanup Instructions
2
1. When the steam cleaning process is complete, disconnect trigger solution hose from solution tank. The solution tank should then be unplugged and emptied of the remaining solution and the exterior wiped off. It can then be stored until the next use. 2. To drain the solution hoses, turn on the power switch, hold the trigger solution hose above your head and press the trigger. All of the remaining solution will drain out and is extracted through the steam cleaning recovery head into the recovery tank. 3
3. Remove the trigger valve and steam head.
4. To flush out wand and vac hose, fill a container with hot water and extract. Send 2 paper towels through to properly clean and dry out wand and hose.
4
5. The recovery tank should be emptied and cleaned with water. Replace the inner tube.
Steam Cleaning Tips • When operating canister as a hot-water extraction system, be sure filtration tube is removed from dome. • In this function, always use the urethane foam filter in the secondary filter holder. • Generally, a back and forth scrubbing action, cleaning small sections of carpet at a time, is the best method of hot water extraction. The proper amount of solution to spray into the carpet depends upon the degree to which the carpet is soiled. The more soiled the carpet, the more solution and scrubbing action is required, even to the point of going over the area being cleaned several times. Always clean your carpet before it becomes noticeably soiled. See Carpet Maintenance Program on page 11. • IMPORTANT: It is important to empty the filtration recovery tank each time before re-filling the solution tank. To prevent overflow, your AF2 employs an automatic flotation ball shut-off system. Always be sure that the flotation ball is in its holder when operating your AF2. For more information or to place an order call 1-888-764-3700
2
5
Picking Up Liquids/Wet Pick-up 1. Be sure switch is off and canister is unplugged. 2. Before inserting the recovery tank, remove the filtration tube from the filtration chamber inlet. (Filtration tube must be removed during wet pick-up or steam cleaning function.) 3. Be sure that the secondary urethane foam filter (black) is in place in the front lid. 4. Attach electrified vac hose (EVH) into hose lock (page 5 #5). NOTE: Do Not insert the male plug end of the EVH cord into the auxiliary outlet when operating your AF2 as a wet pickup vacuum. 5. If attached, remove motorized vacuum head and power cord from sliding wand and replace with the spray and recovery head, hard floor tool, any on board tool, or optional squeegee. 6. Plug canister into proper wall outlet, turn power switch on and commence operation.
Tips for Picking Up Liquids, and Wet Pick-up: • Never use the motorized dry vacuum head for wet pick-up. • When using the canister to pick up water or other liquids, be sure the filtration tube is removed from the filtration chamber. • After vacuuming up a sticky or messy substance, flush clean the EVH and wand by vacuuming clean, warm solution through the wand end as described on page 9. • Your AF2 system employs an automatic flotation ball shut-off system to prevent overflow. When recovering solution during the wet pick-up or hot water extraction functions, be sure that the flotation ball is in its holder.
10
For more information or to place an order visit www.thermaxaf.com
Carpet Maintenance Program With the extremely high cost of carpet today, it is important to develop and implement a planned carpet maintenance program. This is the best way to prolong carpet life, as well as protect your investment. For everyday maintenance of your carpets, vacuuming with the Thermax AF2 is important. However, keep in mind, vacuuming alone will not totally remove all soils and oily substances from the carpet fibers no matter how powerful the vacuum may be. Periodically, depending on the degree of traffic over the carpet, a deep cleaning of the carpet fibers is imperative. This is where the hot water extraction (steam cleaning) function of the Thermax AF2 is needed. The AF2 has this capability. (If yours is not so equipped, contact your local distributor for information.) Hot water extraction is a flushing action of hot water and cleaning solutions sprayed into the carpet fibers or upholstery. This process releases the soils and grease and the now dirty solution is extracted. This process can be compared to washing your carpet or upholstery the same as you would your clothes. Listed below are a few tips for proper carpet maintenance: • Vacuum carpets on a regular basis depending on traffic frequency. • Use area mats where traffic enters a carpeted area from a hard surface. • Schedule hot water extraction of your carpets at least twice a year, and more frequently in high-traffic areas. • Don’t wait until carpets are noticeably dirty before hot water extracting. It may be too late to get out all dirt and stains.
Service of DoubleInsulated Appliances In a double-insulated appliance, such as your Thermax AF2, two (2) systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for double-insulated appliances must be identical to the parts they replace. This double-insulated appliance is marked with the words “DOUBLE INSULATED” on the inside top case assembly.
For more information or to place an order call 1-888-764-3700
11
Triple Filtration The Thermax AF2 has a unique triple filtration system. The water in your Water Filtration Recovery Tank is the primary filter. It strips away the dirt and all particles that the water can saturate. As the air leaves the tank, it travels through a second filter in the tank lid. This filter captures larger stray particles. Immediately following this high density foam filter, the air moves to the final filter. Either the black urethane foam filter or the white electrostatic allergy filter traps the smallest of particles, which include allergens and any other particulates not captured in the two previous filter systems. This leaves the air that is re-entering the room the cleanest possible. All three filters are washable or replaceable: • The water is simply poured out after each use and refilled when you’re ready to clean again. • The secondary foam filter in the tank lid and the urethane foam filter in the front lid are washable in warm soapy water, rinse, dry and replace. • The white electrostatic filter in the front lid must be replaced when it becomes completely covered with dust, or when dirt appears on the back side. Snap it out of its the filter holder and install a new one.
3
Thermax AF2 Secondary Filtration System Instructions 1. Place either the reusable urethane foam filter or the disposable Electrostatic Allergy Filter in the filter holder base. 2. Place the filter retainer over the filter holder base with filter in place. Press down on all 4 sides until the filter retainer snaps firmly in place. 3. Place the assembled filter base side down into the Front lid. Your secondary filtration system is now in place. NOTE: The foam core filter should always be in place during any operation.
When to Use the Black Urethane Filter • The black urethane foam filter is for general overall use and can be used during all phases of operation. It is a washable and reusable filter. • Always during the hot water extraction function. • During normal vacuuming. NOTE: It is highly recommended to replace your two foam filters a minimum of once per year.
12
For more information or to place an order visit www.thermaxaf.com
When to Replace the White AF2 Filter • Replace only when filter is visually covered and overloaded with dust particles. • Every 4 to 6 weeks depending on local soil conditions and frequency of vacuuming or about a dozen vacuumings. • Since soil type varies from state to state, city to city, and even home to home, the type of soil contained in your carpets will have an effect on filter replacement frequency. • The AF2 Electrostatic filter can appear to be completely soiled and still remain 100% effective in filter and airflow efficiency. Therefore, as a general rule, we recommend usage for at least 4 weeks between replacement. • The “dirt” you see on the surface of the AF2 filter represents millions of non water soluable and microscopic sized particulates that would normally escape undetected into the surrounding environment with any other standard type vacuum. • During hot water extraction if urethane foam filter is not available.
A
Motorized Power Head Service Quarterly Cleaning • To keep your power head operating at its peak, we recommend the following: A) Remove the case top from your power head by first removing the single screw from the underside of the unit. It is clearly marked with engraving. B) At the rear of the unit are two tabs. Press tabs in and lift. Case will now lift off. C) Remove the brush roll by simply lifting it out of its cradle. The ends of the brush roll where the locating tabs are should be cleaned throughly. Any carpet strings, hair or other debris around the brush roll should be removed. D) Any dust build up around the motor or air vents should be removed. Any dust build up around the air passage should also be cleared. • To reinstall the belt and brush roll put belt around the brush roll and slip the belt over the motor shaft. Then insert the end of the brush roll furthest from the motor. (Note: the orientation tab is in the shape of a half circle). Once this end is in place, roll the opposite end in place until it pushes all the way in. It also has an orientation tab in the shape of a rectangle. Spin brush roll until belt is on track. • Replace the case top by inserting the front of the case nearest the brush roll and then snap the back in place over the tabs. Replace the screw in the underside of the unit. • Periodically remove debris that may wrap around brush roll. Annually • Over a period of time the belt will stretch out and the brush roll will wear. It is recommended that on an annual basis the belt and brush roll be replaced. This will ensure the power head is operating at its peak performance.
B
C
Parts List: 1. Agitator Brush 05-342-00 2. Drive Belt 05-349-00 For more information or to place an order call 1-888-764-3700
13
Parts Diagrams Canister Only 4
10
7
1
8
2
6
5 3
11
9
12
1. Front Lid Assembly Complete 2. Hose Lock Assembly 3. Rear Lid Assembly 4. Crevice Tool 5. Hinge Kit with Screws 6. Latch Kit with Screws 7. Upholstery Tool with slide on brush 8. Dusting Tool with brush 9. Electrostatic Allergy Filter, 2 pk 10. Primary Filter Base 11. Filter Retainer 12. Primary Foam Filter
24-105-000 37-025-000 24-050-001 01-242-01 32-905-000 32-902-000 35-300-000 35-301-00 05-315-00 01-045-00 04-041-00 05-316-00
Parts Recovery Tank Assembly
1
1. 2. 3. 4. 5. 6. 7. 8.
Recovery Tank Assembly with lid (English) Recovery Tank Recovery Tank Lid Assembly Baffle/Ball/Cage Assembly Foam Core Filter Foam Core Holder Inner Filtration Tube Outer Filtration Tube Chamber
22-050-000 01-280-00 24-260-000 32-910-000 05-329-00 01-224-00 32-913-000 01-220-00
2 3 5 6
8
4
7
14
For more information or to place an order visit www.thermaxaf.com
Hard Floor Tool Maintenance/Cleaning Instructions: Remove Debris in neck of tool and brush as required. 1. Hard Floor Tool 10"
35-310-001
Telescopic Stainless Steel Wand Maintenance/Cleaning Instructions: Periodically flush with hot water to remove dust and debris. 1. Sliding Wand
32-075-000
Electrified Vacuum Hose Assembly (120V)* 1. Hose Connector 01-064-00 2. Complete 120v 10' Assembly 21-120-001 3. Complete 120v 14' Assembly (optional) 21-314-214 4. Complete 120v 20' Assembly (optional) 21-314-220 *Electric version only applies where accepted by electrical approval authorities.
2 10 ft.
3 14 ft.
4
20 ft.
Vacuum Hose Assembly Non-Electric Version (230v)* 1. Hose Connector 2. Complete Assembly 7' 3. Complete Assembly 10'
01-064-00 21-015-000 21-000-001
For more information or to place an order call 1-888-764-3700
3
2 7 ft.
10 ft.
15
4 6
1
8
3
Steam Cleaning Solution Tank with Built-in Pump Parts Diagram 1. 2. 3. 4. 5. 6. 7. 8.
Pump Housing Vented Cap Pump Housing Screw Pump, 55 PSI Pump, 55 PSI Solution Hose Assembly Power Cord Assembly Panel Disconnect
01-500-00 24-302-001 05-054-00 02-180-00 (120v) 02-180-01 (230v) 20-019-012 27-005-000 03-400-00
7 2
Steam Head Assembly Maintenance/Cleaning Instructions: Periodically flush with hot water to remove dirt and debris. 1. Steam Head Assembly (with plastic disconnect)
35-400-000
Trigger Spray Valve Assembly Maintenance/Cleaning Instructions: Flush hose with warm water after each use. Make sure water has completely drained from valve and hose prior to storage.
1
1. 10” Solution Hose & Spray Valve Assembly 29-567-209 2. 14” Solution Hose & Spray Valve Assembly 29-562-214 3. 20” Solution Hose & Spray Valve Assembly 29-562-220 (All include plastic disconnect)
2
16
3
For more information or to place an order visit www.thermaxaf.com
Wet and Dry optional accessories on this page do not come standard with your AF2. Contact your local Distributor or the corporate office to receive details on purchasing or receiving then free through our referral program.
Optional Accessories: Dry 1. Turbine Powered Hand Wand 35-018-00 The mini-turbo brush is driven by non-electric air turbine technology, working off the powerful airflow of the AF2. It’s the perfect complement to the AF2 system for stairs, upholstery and any other small, tight area where a compact, hand-held head is required. 2. Deluxe Hard Floor Tool 35-515-000 The Deluxe Floor Tool is to complement the cleaning ability of the AF2 on bare floors. There is an optional pad which attaches to the bottom of this tool to help safeguard hard wood floors. 3. Surface Sweeper A-2101 Great for quick pick-ups on hard floors, carpets & area rugs 4. Cushion Cleaning Bag 06-630-00 Removes stale air trapped in cushions and pillows.
4 1 2
3
Optional Accessories: Wet 1. Steam Cleaning Accessory Kit (A, B, C & D) 32-030-121 Includes everything needed for steam cleaning with your AF2: A) Aqua Spray & Recovery Head, B) Water Valve & Solution Hose, C) Carpet Cleaner Solution Tank (1-Gal.) with built-in pump, and D) 16oz. Therminator 100 Carpet & Upholstery Cleaning Solution. 2. Squeegee Brush Complete with Spray Assembly 35-410-000-P Ideal for cleaning windows & hard floors. 3. Squeegee Brush Assembly 35-268-000 4. Squeegee Spray Assembly 29-580-002 5. Upholstery Hand Wand 35-271-000 For steam cleaning hard to reach areas, carpeted stairs & car interiors. (all include plastic disconnect)
For more information or to place an order call 1-888-764-3700
C B D 5
A 4 3 2
17
Thermax Steam Cleaning Solutions
Thermax Air Purification Solutions
AQUA BLUE (19-310-00-I) / Valley Fresh (940-I): These are a concentrated blend of proprietary elements that therapeutically clean and freshen your indoor environment when used as directed. Just add the required amount into the water of the recovery/filtration tank before and LIQUID CARPET & UPHOLSTERY during vacuuming to achieve the CLEANER (6060-I): (16 or 32oz.) Designed desired result. Your home will permeate with a fresh, clean, to lift oils, stains, and deeply embedded soils healthy aroma! from carpet & upholstery for easy extraction. Professionally formulated to dispense a perfect blend of gentle yet effective cleansing agents for cleaning carpets. Cleans and brightens leaving carpets soft to the touch with no “soapy” residue.
Nearly thirty-five years of extensive field use and refinement have proven our safe and effective cleaning solution formulas. Thermax has a product for just about every carpet cleaning application. Formulated specifically to be used in conjunction with Thermax AF2 carpet cleaning systems the products and their application are further defined below.
CARPET & UPHOLSTERY DEODORIZER (5080-I): (32oz.) While steam cleaning, it neutralizes and removes offensive odors from carpet & upholstery at their source, especially pet urine, smoke and other organic matters. Leaves a fresh, pleasant scent.
BIOZYME STAIN & PET ODOR ELIMINATOR (5150-I): (32oz.) Liquifies and digests organic waste, through beneficial bacterial enzyme action. Eliminates old and new odors at their source. Product is safe to use around pets, humans, and environment. No harsh chemicals. Cleanses and deodorizes.
AROMATIC FRAGRANCES: Visit www.thermaxaf.com or call 1-888-764-3700 to order the fragrance of your choice: Spring Rain, Summer Sorbet , Fresh Apple, Orange, Apple Cinnamon, Eucalyptus & Menthol, Cinnamon & Spice, Lemon, Sea Mist, Plumeria, Eucalyptus, Vanilla, Strawberry, Fresh Linen, or Mulberry. Each bottle is sold separately or by the case (12 per case), and contains 1.6 oz. oil-based solution used for leaving an aromatizing scent behind while vacuuming or purifying the air.
PRE-SPOTTER (6030-I): (32oz.) Great for pre-treating heavily stained carpets & upholstery before steam cleaning. Loosens stubborn stains, oils, and dirt from the fibers for easy removal with any Thermax system. The use of Pre-Spotter is an important step in obtaining the best cleaning results. Defoamer (6070-I): Defoamer is used in the solution recovery tank to control potentially damaging foam build-up within the tank. Every carpet being cleaned contains foreign matter within its fibers. Often times, this foreign matter has a tendency to excessively foam when extracted into the recovery tank of the cleaning system. Using Defoamer while cleaning minimizes the potential for the foam to overflow into the vacuum motor. 18
minimax AIR fresheners: These miniature water based air fresheners work off the same concept as the AF2. The Minimax uses the same deodorizers & aromatizers listed above. The large model is designed to freshen the air in your home, while the smaller model comes equipped with a power cord suited for your vehicle.
For more information or to place an order visit www.thermaxaf.com
Thermax Commercial Product Line Great rental machines for any retail store • Auto detailing • Commercially cleaning carpets in your area.
CP-3 Therminator The Thermax “Therminator” Cleaning System offers features no other cleaning system can. • Thermostatically controlled heating system for thorough and hygienic cleaning. • 3 Gallon hygienic stainless steel solution and recovery tanks. • 60 psi high-efficiency commercial solution pump. • Powerful, commercial 2-stage vacuum motor for rapid recovery and fast drying time (100” water lift). • A choice of a clear view stainless floor wand or a PB309 Power Brush for added scrubbing. • Commercially built, professional quality equipment for the best results possible. • 4-step professional formulated chemistry for the brightest, freshest carpets. • Multi-option wand and hose package for versatility.
Thermax Steam Cleaning Solutions are also available for purchase in commercial sizes of one-gallon or five-gallon
Thermax CP5 The Thermax CP5 is an industry proven performer, built to endure the most demanding carpet and upholstery extraction cleaning applications. Constructed in a portable footprint easily operated by one individual, the CP5 is designed to attain the highest level of professional cleaning results!
Therminator CP12-DV The Therminator CP12-DV is Thermax’s newest industrial steam cleaner, which aggressively removes dirt, grime, odors and other embedded pollutants with unmatched efficiency.
• Powerful dual two-stage vacuum motors (165” water lift) for faster cleaning, increased recovery speed and • Powerful two-stage vacuum motor for quicker drying time. increased recovery speed and quicker • Built-in 1800-watt solution predrying time (112” water lift). heating system for quick, uniform • Built-in 1800/300 watt dual temperature control (up to 175°). solution heating system for uniform • 11-Gallon hygienic stainless steel temperature control (up to 175°). solution tank. • 5-Gallon hygienic stainless steel • 12-Gallon large capacity recovery tank solution and recovery tanks. with automatic overflow protection • High-impact, chemical resistant shut-off and waste gate empty system. housing with conditional lifetime • Single 25' power cord for one circuit warranty - virtually indestructible. operation. • 60 psi high-efficiency demand solution • High-impact, chemical resistant pump. housing with conditional lifetime • Multi-option wand and hose packages warranty - virtually indestructible. for vacuum and extraction versatility. • 100 psi high-efficiency demand solution pump (65-psi pump option available for auto detailing). • Engineered for mobility and stability, tip resistant operation. • Built-in dolly handle for greater control and maneuverability. • Large 8” rear wheels make it easy to go up and down stairs. • Marine sealed switches.
For more information or to place an order call 1-888-764-3700
19
Trouble Shooting Tips Condition and Cause
Correction
Vac Motor Won’t Run 1. 2. 3. 4. 5.
Canister not plugged into outlet.................................................... Plug canister into working outlet Defective vacuum switch............................................................... *Replace vacuum switch Loose terminal connections........................................................... *Check ALL terminal connections Defective vac motor....................................................................... *Replace vac motor Household fuse/breaker tripped..................................................... Replace fuse/reset breaker
Loss of Vacuum 1. Clogged motorized power nozzle neck........................................... Remove wand and clean out neck 2. Clogged foam (black) secondary filter............................................ Rinse and replace secondary foam filter 3. Clogged disposable electrostatic AF filter (white)........................... Replace with new filter
Wand Won’t Release from Handle 1. Dirt and lint stuck in joints........................................................... Spray some lubricant in joints
Motorized Power Nozzle Won’t Pick Up Properly 1. 2. 3. 4.
Worn belt...................................................................................... Replace belt and clean brush roll Worn brush roll............................................................................. Replace with new brush roll Brush roll slipping or not turning.................................................. Replace belt and clean lint from brush roll (see page 13) Foreign matter clogged in neck of motorized power nozzle............ Clean foreign matter from neck
Motorized Dry Vacuum Head Motor Not Running 1. Improper cord connections............................................................ Make sure both cord ends are plugged in 2. Defective dry vacuum head motor................................................. *Replace motor 3. Vac hose not properly hooked up................................................... Check cord hookup at powerhead and canister ends
Trouble Shooting Tips for Steam Cleaner Accessory Pump Won’t Run 1. 2. 3. 4.
Solution Tank not plugged into outlet........................................... Plug Solution Tank into working outlet Loose terminal connections........................................................... *Check ALL terminal connections Defective pump motor.................................................................. *Replace pump motor Household fuse/breaker tripped..................................................... Replace fuse/reset breaker
Pump Runs, But Does Not Spray 1. Clogged nozzle.............................................................................. Remove wand and clean nozzle 2. Solution Tank empty..................................................................... Refill Solution Tank
*We recommend that this work be done by a qualified service center, not by consumer. 20
For more information or to place an order visit www.thermaxaf.com
Specifications When calling in for service, ordering accessories or spare parts, it’s important to know the Model Number and Serial Number of your canister. The Model Number and six-digit Serial Number will appear on a white label located under the rear lid. If this is missing or defaced, please call the factory immediately as it may have an impact on your warranty. Please check the Product ID Label for the Model you have. Electircal: 120 Volts AC 230 Volts AC
Frequency: 50-60 Hz 50-60 Hz
Dry Weight: Water Filtration Level: Retractable Cord Length:
Amperage: 8.0 3.9
Wattage: 820 900
18 lbs / 8.2 kg 4 quarts / 3.8 litres 20 ft. / 6.1 metres
Electrical Schematic 120V
Electrical Schematic 230V
For more information or to place an order call 1-888-764-3700
21
10 Year Replacement Part Warranty Manufacturer will replace or repair, at its option, parts for the AF2 system, if found to be defective in material or workmanship, for a period of 10 years from the date of purchase. This Limited Warranty is only extended to the original purchaser, and the system must be used in accordance with the Operations Manual and is non transferable. Belts, seals and filters are NOT covered by this limited warranty. Customer will be responsible for all shipping and handling charges in getting parts and/or machine to a Thermax Authorized Service Center. Thermax will assume responsibility for return postage only if defect was found to be covered by this Limited Warranty. Manufacturer’s liability under this warranty is limited to the repair or replacement of parts provided in this Limited Warranty and is in Lieu of all other remedies, including incidental and consequential damages. THERE ARE NO OTHER WARRANTIES GIVEN BY THE MANUFACTURER, AND THE MANUFACTURER WILL ONLY HONOR THE WARRANTY AS DESCRIBED HEREIN. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. IMPORTANT: This Limited Warranty will be null and void if: 1. 2. 3. 4.
The Thermax was not purchased from and authorized Thermax Distributor. Original factory serial number has been defaced, removed or changed. Cleaning solutions other than Thermax’s are used. Machine is used for other than your personal household use.
__________________________ Name of Distributor __________________________ Distributor Phone Number __________________________ Date of Purchase __________________________ Serial Number
PLEASE NOTE: The Corporate website, www.thermaxaf.com, has this instructional manual along with video footage from the instructional DVD for further assistance on any function & how-to steps for the Thermax AF2.
PLEASE NOTE: Retain this owner’s manual along with your copy of the Warranty Registration Form. Proof of purchase must accompany all warranty claims. To Contact Corporate Office:
Thermax World Headquarters 3315 East Texas St. Bossier City, LA 71111 1-888-764-3700 Website: www.thermaxaf.com Email:
[email protected]
