Transcript
Airless Line Striper/Paint Sprayer A I R L E S S C O Handlebar controls for spray gun, engine speed, and swivel front wheel release
3600 50’ of airless hose for spraying stencils or general spray painting. Durotech 4HP gas engine
Swivel front wheel with simple turnbuckle based RADIUS MEMORY™
Contractor Spray Gun with reversible REV-TIP™ eliminate drips and clogs
This Economical Linestriper has an Electronic Pressure Control System and a Durotech Gas Engine! The Spray & Stripe 3600 offers the professional line striping contractor all the key design features needed to be productive on a daily basis–at an unheard of value. It’s a combo of our proven reliable LP airless pistonpowered paint pump, the clutch-based electronic pressure control system used on our bigger stripers, and the Durotech DE400 engine delivering 4 horsepower.
pavement or turfgrass surfaces. The front swivel wheel with our exclusive RADIUS MEMORY™ system delivers consistently smooth circles and curves every time.
Light weight makes the 3600 easy to push on pavement or turf. bukhorn handlebars provide optimal user leverage for precise control keeping lines straight or following curves whether you are striping on a parking lot or bumpy sports field surfaces. Quick release mounts allow the spray gun to be relocated from side to side Dial spray pressure up to 3000 psi with the Electronic in just seconds.
The engine is backed by Airlessco’s industry first, 5-year Limited Engine Replacement Warranty*. The smooth running heavy duty commercial engine has Pressure Control System The 3600 can also be used dual coils, and solid-state as a mobile airless sprayer. transistorized magneto ignition. It even So you can work reliably day has automatic shutdown circuitry should after day whether the job is striping the oil level drop too low. parking lots or ball fields, spraying Large 13” wide-track pneumatic interior or exterior walls, or covering tires offer smooth tracking on rough graffiti. * See Durotech engine limited warranty statement for details.
Spray & Stripe 3600 Model # Engine: Max Pressure Max Output Annual Usage Max Tip Size Weight: Dimensions:
305-385 Durotech 4 HP Engine 0-3000 PSI (210 Bar) .7 GPM (2.65 Litres/min.) Up to 5000 gallons 1 gun @ .025” 123 lbs. (Ship wt. 178 lbs.) 37”H x 24” W x 65” L
Airlessco by Durotech
5397 Commerce Ave. Moorpark, CA USA 93021 PHONE (805) 523-0211 FAX (805) 523-1063
www.airlessco.com 001-780 AUG07
The front swivel wheel with our exclusive turnbuckle based RADIUS MEMORY™ system delivers consistently smooth circles and curves every time. Keep a few preadjusted turnbuckles to match your most common curve arcs. Then simply snap the one you need onto the front wheel carrier and frame mount, for a perfect arc or circle everytime.
3600
The heart of the Spray & Stripe 3600 is our LP airless piston-powered paint pump has been proven reliable in commercial spray equipment used daily by professional painters worldwide. Electronic pressure controls operated a clutch system to activate the pump when additional pressure is needd. This delivers the pressure you need to atomize even very heavy pavement striping coatings at up to 3000 psi.
Our light triggered professional spray gun features built-in filter, finger tight REV-GUARD™, and reversible REV-TIP™ spray tips. Gun mount features easy height adjustment and quick release spring mount. Each 3600 comes with one tip for line striping and another for general spraying. The flexibility to use the 3600 as a line striper or mobile airless spray rig will keep it busy and productive year round.
While some manufacturers cut costs by using low cost components like plastic wheels and solid rubber tires, Airlessco uses only steel wheels on ball bearing hubs, with pneumatic tires rolling on a solid steel axle. So you not only get a more stable and smoother rolling piece of equipment, it will stay that way for many years to come. That’s because Airlessco equipment is always “Built to Last...Built to Perform”
