Transcript
http://www.gl1800-farkles.com
How to use the Furkot Mapping and Route generation website to create compatible GPS files that can be read by the Honda Goldwing GL1800 2015 Navigation System.
Thomas King www.gl1800-farkles.com (c) 2016
Tho mas King
Digitally signed by Thomas King DN: cn=Thomas King, o=TAK, ou=Owner, email=gl1800.20
[email protected], c=US Date: 2016.07.03 19:36:53 -04'00'
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com FORWARD Welcome! This is a brief manual on how to use Furkot (www.furkot.com) and get your GL1800 to use the gpx files it produces. Furkot is an online digital mapping and routing program that allows you to plan your motorcycle trips online and generate compatible files that your Honda Goldwing – GL1800 can use. CAVEATS Honda has produced several versions of their onboard navigation system for the GL1800 line. This has only been shown to work on 2012 or newer versions of the Honda navigation system. For those readers with older navigation systems please use this as a guide and experiment! EQUIPMENT REQUIRED Below is a brief list of the equipment you will need to get started: • Windows based computer with high speed internet access. (I don’t do MAC sorry) • 2 GB SD card (You may be able to use larger cards) • SD card reader so you can write the GPX files to the SD Card • SD card format program available from the SD https://www.sdcard.org/downloads/formatter_4/eula_windows/index.html • 2012 or newer Honda Goldwing GL1800
consortium
METHODOLOGY As part of my testing methodology I originally created trips in Microsoft Streets and Trips 2013 and used them as a guide when creating the routes in Furkot. Unfortunately Streets and Trips is no longer supported or produced so thus the need for something like Furkot. Once the routes were created in Furkot the routing information was then exported to a compatible GPX file. (gpx files are what the GPS reads to generate the route you wish to travel). Once the gpx files have been saved to the hard drive they are then copied over to the SD card. The GL1800 ignition is then turn to accessory and the MAP button is pushed and then the ENTER button is pushed. The Honda navigation will see that new routes have been added and will ask you to import them. I also generated a second set of GPX files and uploaded them to my Garmin ZUMO 390LM GPS. The routes after the GPS files were uploaded were then compared for similarity and accuracy. Both the GPS and the Honda Navigation System have been updated to the very latest maps available from Garmin for each GPS system.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com HARDWARE-SOFTWARE INSTALL Boot up your windows machine onto the desktop. Currently I am using Windows 7 so all graphics will reflect this. (as a side note if you are using Windows 10 you have my sympathy) Once you are on the desktop plug your USB reader into the USB slot. I bought mine from Amazon for about $10
You should see a small box pop up in the right hand window the first time you do this telling you the O/S is installing the drivers. Now open up Windows file explorer and in the LEFT hand window of file explorer you will see something SIMILAR to below.
Notice there are two removable drives in the list. Your drive letters MAY be different! If you click on them you may get a message as below
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Insert your sd card into it and see if it reads it, if not click on the other drive letter and see if the card is found. (Remember there is more than one slot on this particular card reader. (if you want the very exact same one do a search for Saicoo USB3.0 4 Slots 11 in 1 Card Reader, with dual SD and Micro SD slots on the web) Now we need to download the format program and install it. Currently I will be using the current version of Chrome for my browsing and access to Furkot. Open your browser and go to the following link: https://www.sdcard.org/downloads/formatter_4/eula_windows/index.html and you will see the EULA you have to agree to
Scroll to the bottom of the page and click the Accept button
You will see in the bottom right corner of the Chrome window the download proceeding
Now in the Windows File Manager on the left hand screen near the top you should see under Favorites the Downloads Folder
Hover your mouse over the word Downloads and DOUBLE LEFT CLICK
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com In the left hand window of file explorer you will see the contents of your download folder
Unfortunately the format program is in a compressed format so we have to extract it. All versions of windows have this ability built in so navigate your mouse cursor until the tip of the pointer hovers over the SDFormatterv4.zip and SINGLE RIGHT CLICK ONLY. A pop up context menu will appear; move your mouse cursor over the Extract Here choice (notice it is highlighted in blue) The SINGLE LEFT CLICK ONLY.
A new program will appear in the list (NOTE the MISC folder will NOT be on your machine!). The new program is setup.exe
Navigate the mouse pointer over the setup.exe choice and then SINGLE LEFT CLICK ONLY. Once you do this the choice should be highlighted in blue then, without moving the mouse cursor, DOUBLE LEFT CLICK ONLY to run the program.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com You will see the following screens in order 1.
2.
3.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com 4.
5.
6.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com FORMATTING THE SD DRIVE You disk formatter is now installed and you will see an icon on your desktop similar to this
Navigate your mouse pointer over top of it and SINGLE LEFT CLICK ONLY and you should see the following:
Notice that the Refresh, Option, and Exit button are the only ones accessible! This is because there is no SD card in the device. Please take your 2gb SD and insert it in the reader. (ignore this if you left the card in the reader from the previous steps as you will have access to more) Once the card is inserted in the card reader navigate your mouse cursor over to the Refresh button and SINGLE LEFT CLICK ONLY. You should see something similar:
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com
Notice it shows that Drive J: is the one that contains my SD card and it is 7.39 GB. (My 2gb card is in the wing at the moment.). If this is a new card fresh out of the box you can leave the options alone. If this card has been used elsewhere then you should change an option. To change the options navigate your mouse cursor over the Option button and SINGLE LEFT CLICK ONLY and a new window will open up.
You will need to change the format type from QUICK to Full (erase). The option Full Overwrite can be used if the card seems to have some problems (flaky). To change the setting navigate your mouse cursor over the down arrow next to the word QUICK and SINGLE LEFT CLICK ONLY. Navigate the mouse cursor down until it is over the FULL (Erase) choice and SINGLE LEFT CLICK ONLY. Now navigate your mouse cursor over the OK button and SINGLE LEFT CLICK ONLY.
Lets Format our SD card! Navigate your mouse cursor over the Format button and SINGLE LEFT CLICK ONLY. And a new window will pop up. Navigate your mouse cursor over the OK button and SINGLE LEFT CLICK ONLY.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com
A window will appear that provides you information about the formatting process.
Once the formatting is complete you will see another window which will provide you with the results of your format.
Whew! Now you are done! But wait why shouldn’t I use the format program built into windows? The reason is it does not do as good a job as the formatter program from the people who make the SD cards. You want your card and software to be reliable…. Right? Navigate your mouse cursor over the Exit button and SINGLE LEFT CLICK ONLY to dismiss the formatting program.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com PREPARING THE FORMATTED SD CARD FOR DATA So now we need to add some folders so the data from Furkot in the form of GPX files can be written into them. Most Garmin type of GPS devices require a particular format of folders where the data is stored. A common mistake is simply copying the GPX files onto the root of the SD card. The HondaGarmin GPS will not see the GPX files (think route files) and leads to a lot of people being frustrated. Open up Windows Explorer and you should see a 2 paned window which is separated into Left and Right panes. In the left hand pane you should see the Computer icon in a list as below.
Navigate your mouse cursor over top of the icon with the word Computer next to it and DOUBLE LEFT CLICK ONLY. And you should see in the right hand pane the list of drives that are available on your computer.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Navigate your mouse cursor over to the right hand pane and hover the mouse cursor over the removable disk drive and DOUBLE LEFT CLICK ONLY. (**NOTE your disk drive will be different! Remember when you formatted the disk it showed you which drive letter to use. In my case it happened to be the J: drive**)
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Notice the words “This folder is empty” at the top of the right hand pane in windows file explorer. This means we have to create a couple of folders. Navigate your mouse cursor onto the right hand pane just under the words “This folder is empty” and SINGLE RIGHT CLICK ONLY. A new context menu will appear.
Navigate your mouse cursor down the menu until you get to New and then once it is highlights a new “flyover” menu will appear next to it. Navigate your mouse cursor until you see the word Folder and then SINGLE LEFT CLICK ONLY
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com A new unnamed folder will be created.
Now type the word garmin in the box and then navigate your mouse onto the white space below it and SINGLE LEFT CLICK ONLY. You will left with a folder named Garmin
Navigate your mouse cursor over top of the word garmin in the right hand pane of Windows Explorer and DOUBLE LEFT CLICK ONLY. And you will see the “This folder is empty” warning again. Navigate your mouse cursor just below the “This folder is empty”message and SINGLE RIGHT CLICK ONLY and a new context menu will appear. Navigate with your mouse cursor to the new choice and then the folder choice (as above) and create your new folder.
Now type the word GPX in the box and then navigate your mouse onto the white space below it and SINGLE LEFT CLICK ONLY. You will left with a folder named GPX (all caps)
THAT IS IT! You have created the correct directory/file structure which the Honda Navigation System can read from and import your gpx files. Good Job!
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com CREATING YOUR FIRST ROUTE You are now ready to create your first route in Furkot. Open your browser to www.furkot.com and you should see the following screen
While this site recognizes me as I already have an account you will have to navigate your mouse cursor to the SIGN UP button and SINGLE LEFT CLICK ONLY. You should see a screen similar to the one below
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Choose your social media platform or choose to use email and password. Follow the setup and verification procedure and eventually you will be taken back to the main logon screen which you have seen above. Please log in with your method of choice and you will see the main screen where you can begin designing your route. NOTE Furkot has a very short time out period, thus if you go away from your computer for a while and come back it may appear all is well but you will not be able to do much! Please remember to log out each time you have to leave your computer. A number of users have made the statement “It does not work and I cannot export the GPX files” turns out Furkot had logged them out and in order to continue they had to log back in. This is one reason I decided to write this document! If this is your first time on Furkot and you have not trips planned the first thing you will see if the PLAN A NEW TRIP window.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Simpley choose a start point by typing the name in I chose Miami. You will notice as you type suggestions come up to help you complete this box
Next give your trip a name. I called mine test1, now navigate your mouse cursor over the NEXT button and single left click only.
I generally leave the end point empty for now.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Now you will be shown trip options. You can enter the Begin and End date. I recommend you set the how long do you want your days to be times to start and end at 9AM. This will mean Furkot will not automatically insert overnight stops. Most motorcycle types prefer to set this themselves. Lastly choose the Motorcycle and the Camp icons (if you are camping). Then navigate your mouse cursor over the DONE button and SINGLE LEFT CLICK ONLY. On my setup I have chosen to Start on Sept 1 and Finish on September 4. My days start and stop at 0900 which allows me to schedule my own times. I have chosen to avoid highways, ride a motorcycle, and camp.
You will be show the map page with a guided tour window sub window. I recommend you run through the guided tour and then when finished resume this tutorial.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com CONTROL OVERVIEW There is a lot to the interface! Rather than give a painfully detailed description of each function I will instead only deal with the controls most ofter used. There is much more that Furkot can do for you and I leave that up to you to explore. Below is a typical screen you will see when you create a new trip. You will notice as you navigate your mouse cursor over top of the controls that a tiny pop up description will appear. On the Left and right sides of the screen you will see orange buttons which you will interface most frequently with.
The MY TRIPS button will take you back to your saved trips (once you have created the first one). On the right side of the screen is the TRIP, PLAN, SLEEP, EAT, FIND buttons. I will concentrate on the TRIP and PLAN buttons for this manual. I encourage you to explore ALL the settings (I am still exploring) and become your own expert. NOTE * I am illustrating ONE particular way of generating and exporting a trip. There are many paths on the road to enlightenment so me know if you discover a new way!
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Map editable or not? I was just working on the map and it timed out so I had to refresh the window and sign in again. After this onerous chore all is well. Pay attention to this symbol on the top of the screen
Notice the orange bar underneath the “pencil” this indicates that you are in editing mode and the map is live. If you do not see the orange bar navigate your mouse cursor over top of it and SINGLE LEFT CLICK ONLY. It may re-enable it or you might have to logon again. The “TRIP” Button Navigate your mouse cursor on the orange TRIP button on the right hand of the screen and SINGLE LEFT CLICK ONLY.
A new window will open up and should look similar to below
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com On this screen you can set setting such as stopover time, fuel range, etc, I RECOMMEND you set the stopover length to 0. To accomplish this navigate your mouse cursor over the word stopover and SINGLE LEFT CLICK ONLY. Your screen should change as below
Navigate your mouse cursor over the time next to the word Stopover and SINGLE LEFT CLICK ONLY. The screen will show a pop up as below.
Click on the zero (already done in this snapshot… the default is 1 hour). Then navigate your mouse cursor over the word SAVE and SINGLE LEFT CLICK ONLY and the Cancel / Save choices will disappear. One particular icon on the TRIP window to pay attention to is the second one from the left as below
This is the “magic” button that allows you to export your route information to the SD card so your Goldwing can understand it. More on this later…..
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com You should also rename the trip to make it more meaningful! Navigate your mouse cursor so it is over the words “Miami Beach” and erase it and rename to Leg1toKy then navigate the mouse cursor over the Save button and SINGLE LEFT CLICK ONLY.
Now navigate your mouse cursor over the work TRIP and SINGLE LEFT CLICK ONLY which will cause the TRIP screen to roll off screen to the right. Having fun so far?
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com The “PLAN” button Now the fun begins! Please navigate your mouse cursor so it is on top of the PLAN button and SINGLE LEFT CLICK ONLY. A window will appear and this is your trip planning window.
Currently we only have one waypoint in the list so lets add a few more! in order to zoom out you can use the + or – buttons located on the top control bar order you use the mouse scroll wheel if you mouse has this feature. Scroll out until you can see the United States. You can readjust the map by LEFT CLICK AND HOLD the mouse key and drag the map to the desired position. Simply let go of the LEFT MOUSE BUTTON and the map will stay in place
For our purposes we will be traveling to Lousiville KY.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Generating the route There are a few way to get the route. You can let Furkot route you and then change the route after to suite your tastes or you can set way points along the way if you know which roads you want to travel. For this manual we will let Furkot find the route for us and then we will modify it to suit our tastes. Find the flag icon as shown below in the PLAN window and SINGLE LEFT CLICK ONLY on it.
A new window will open which should look like below
Notice the cursor is to the LEFT of the work Place. Start typing the name of your destination here and Furkot will suggest names for you OR you can type a specific address and it will find it. Here I started typing Louis and it came up with Louisville, KY.
I selected it and then clicked the save button and the route automagically appeared.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Below is the initial route that Furkot created for me.
Let’s examine the route in more detail so zoom into the map moving it as needed so you get the to start of it in Miami. Wow it has avoided most of the stupid busy roads and it taking me a way I have never been before! This is very good especially because I am missing Atlanta with all that traffic!
However say on the way I want to visit Birmingham.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Find the flag icon at the top of the PLAN screen and navigate the mouse cursor over it and SINGLE LEFT CLICK ONLY. Begin typing Birmingham and accept the suggestion. Now navigate your mouse cursor over the SAVE icon and SINGLE LEFT CLICK ONLY. Notice the route was automagically changed as seen below.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Route Options On this trip let’s say you want to go through Nashville on the way. Navigate you mouse cursor over the blue route line to the east of Nashville on the map and LEFT CLICK AND HOLD the mouse button. Now drag the blue line to the west until it goes though Nashville and release the LEFT BUTTON on the mouse. The route automatically updates as seen below to include Nashville!
Those are the basics! Save your work by SINGLE LEFT CLICKING on the pen with the orange bar at the top of the screen. The SINGLE LEFT CLICKING on it again to turn on editing mode.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com EXPORTING THE GPX FILE Now the exciting part exporting the GPX file to the SD card which will be installed in the wing! Just a little excursion on philosophy first as I tend to try to “Keep It Simple Silly” or KISS. When I am going long distance or a rather complex route I tend to break my routes down into “LEGS”. For example this would be LEG1 and the return trip would be LEG2. This allows me to have the ability to go to my destination via a particular route and then travel back by a different one. Another aspect of the Garmin built Honda Navigation System is that it sometimes has problems with long and intricate files names. In some cases when you create a file name, of the GPX file, greater than 8 character or containing special characters like “*&$%” it will not read it! My standard for GPX files that are going to be used by the Honda navigation system is the old DOS standard of 8.3. In other words your GPX file name should be no longer than 8 characters and only contain alpha numeric strings and nothing else. Of course the .3 in the old file naming standard is already used by GPX. So make sure the SD card you previously formatted is in the card reader and lets begin. Close the PLAN window by navigating your mouse cursor to the orange PLAN area and SINGLE LEFT CLICK ONLY. The window should slide to the right and disappear. Next navigate your mouse cursor up to the orange TRIP area and SINGLE LEFT CLICK ONLY and the TRIP window should open. First check to make sure that the orange bar appears under the pencil icon. If not click the pencil and log in again if required.
Next navigate your mouse cursor to the flag near the top of the window and SINGLE LEFT CLICK ONLY.
The export window will open up and should appear similar to the one below
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Navigate your mouse cursor over the circle next to the text Garmin route GPX (.gpx) and SINGLE LEFT CLICK ONLY. Then navigate your mouse cursor over the orange EXPORT button and SINGLE LEFT CLICK ONLY. If at this stage a blank window opens up you have been logged out and need to log in again! If you are using Chrome as your browser you may have it set up to auto download to the “Downloads” folder and we need to change this behavior. In Chrome navigate your mouse cursor to the upper right corner of the browser window and SINGLE LEFT CLICK ONLY over the three horizontal bars icon.
A drop down menu will appear and navigate your mouse cursor until is it over the word Settings and SINGLE LEFT CLICK ONLY. A new “settings” tab will open up. At the bottom of the list you will see the words “Show advanced settings...” navigate your mouse over these words and SINGLE LEFT CLICK ONLY. Scroll down until you see the Downloads section and ensure that the Ask where to save each file before downloading is ticked. Once this has been completed navigate your mouse cursor up near the top of the settings tab and SINGLE LEFT CLICK ONLY on the “x” to close this tab. You should now be back in Furkot. Try clicking the export button and you should see the file save as dialog box as below
First you should rename the file to something like Leg1ky. Navigate your mouse cursor and SINGLE LEFT CLICK ONLY in the white in the filename area and delete the Miami_Beach.gpx name. Type in you simple name such as Leg1ky also no need to add the .gpx extension as it is added automatically!
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Now we need to choose where the file will go to. When we originally formatted our SD card it was located on the J: drive. (remember this is only on my computer and your drive letters will be different!) In the right hand pane of the File save as dialog box DOUBLE LEFT CLICK ONLY on the word Computer. You will see a dialog similar to the one below.
NOTE I HAVE MANY DRIVES ATTACHED TO MY COMPUTER YOU WILL NOT SEE THE EXACT SAME THING ON YOUR COMPUTER! On my computer I am looking for the J: drive. In the right hand pane navigate your mouse cursor to the correct drive, ON YOUR SYSTEM, and DOUBLE LEFT CLICK ONLY that drive. You should see a window with a single folder in it called garmin (which we created earlier).
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com In the right hand pane navigate your mouse cursor over the word garmin and DOUBLE LEFT CLICK ONLY. You will now see a single entry called gpx that we created earlier.
In the right hand pane navigate your mouse cursor over the word gpx and DOUBLE LEFT CLICK ONLY. You should see no files in this folder.
Now navigate the mouse cursor over the Save button and SINGLE LEFT CLICK ONLY. The dialog box will disappear and your will be back at the Furkot main screen. YOU ARE DONE! You have created a simple route in Furkot and saved it in the appropriate area for the Honda navigation system to read it. NOTE Remember these instructions have ONLY been tested on a 2015 Level 3 GL1800 thus your mileage may vary!
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com In the main screen of Furkot navigate your mouse cursor so it is over the orange colored MY TRIPS on the left hand side of the screen and SINGLE LEFT CLICK ONLY. You should see your saved route!
Good job. Now we need to eject the SD card so we can place it into your Honda Goldwing. Close all of your open windows on your desktop and then open up Windows File Explorer. In the left hand pane of Windows File Explorer navigate your mouse cursor until it is over your removable drive. While hovering over the drive in the left hand pane SINGLE RIGHT CLICK ONLY and a context menu will appear.
Navigate the mouse until the word Eject is highlighted and SINGLE LEFT CLICK ONLY. You may see a message saying it is safe to remove the removable drive. DO NOT SKIP THIS STEP! Next the install in your Goldwing!
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com INSTALLING THE SD CARD AND ROUTE ONTO YOUR GOLDWING The exciting part seeing if these painstakingly detailed instructions will pay off! Go out to your goldwing and ensure the ignition is TURNED OFF. Then open the trunk. You will see the navigation unit taking up the right side of the back of the trunk. Locate the cover over the SD cards on the left hand side of the navigation unit and open it.
The SD card where the route information is stored is the UPPER one on 2015 GL1800’s. Gently press the card towards the right and then let go. The card can then be removed. Here is the one that comes with the bike.
Note I decided to use an 8gb card that I had in my office. The honda card is only 2gb however you can use up to 8gb cards as long as they are formatted with the program as mentioned earlier. Using windows built in program can lead to problems. Also not all SD cards are created equal as the cheap ones that are available in the internet can break after a few read/write cycles. In this instance always buy name brand cards.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Once the new card is inserted back into the navigation unit by gently pushing it in towards the right hand side of the navigation housing (you will fell a click) Close the cover and then the trunk!
Turn your key to the accessory position and wait for the main screen to be displayed.
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Go to your right hand control panel and press the MAP key and then the ENT key
Eventually you should see the following screen
Using the right hand control panel change the focus to Yes and then tap the ENT key
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com You will be asked whether you want to import routes and tracks or favorites. Please choose routes and tracks to continue
The next screen you see will show you which routes are available and you must select the one(s) you wish to import using the right hand control panel
Once you have check marked the route you wish to import navigate up the to word Import and then press the ENT key on the right hand control panel
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com You should see the route being imported
If you selected more than one it may take a while. Once completed you should see
Press the ENT key on the right hand control panel. Then press the MENU key on the right hand control panel and you will see
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com Navigate with the right hand control panel until you have selected Routes and then press the ENT key on the right hand control panel. You should see the following screen
Choose the Leg1toKy choice and press the ENT key on the right hand control panel. You will then see the following screen
Select the Start choice and press the ENT key on the right hand control panel
Using the Furkot mapping system with a 2015 Honda Goldwing. www.gl1800-farkles.com You should see a screen similar to the following
SUMMARY This just scratches the surface of what can be done with Furkot and the Honda Navigation System. There are hundreds of options in Furkot which could be a manual all on it’s own. Please experiment and share any tips you have in our forums. Be Safe! Tom King 2016
