Preview only show first 10 pages with watermark. For full document please download

Tier 2 Using The Dvd Player With The Projector And Speaker System

   EMBED

Share

Transcript

Tier 2 Using the DVD Player with the Projector and Speaker System 1) Push the power button on the control panel “On” and select “DVD” from the input buttons. If the room has a motorized projections screen, this should turn on the projector and lower the projection screen. If the screen does not lower, find the switch on the wall that controls the screen or pull the screen down manually. Input buttons Volume Control Power *Note: Some control panels may appear slightly different. 2) Turn on the DVD player by pressing the “Power” button. Power If you are experiencing issues using this technology during a class, please call the IT Services STAT phone at 610-921-7828. 3) If you do not see the DVD on the projection screen right away, press the “Video” or “Input” button on the projector remote. This will force the projector to search for the DVD signal. 4) Audio for the DVD player should automatically go to the speaker system. To adjust the volume, use the volume controls on the control panel. 5) Use the “Open/Close” or “Eject” button on the DVD Player remote or on the player itself to open the tray and insert your DVD into the player. 6) Navigate the DVD’s menu using the DVD remote and use the “Enter” or “Play” button to select the feature you want to access. If you are experiencing issues using this technology during a class, please call the IT Services STAT phone at 610-921-7828. Video Power