Preview only show first 10 pages with watermark. For full document please download

Time Synchronization Transmitters

   EMBED


Share

Transcript

PRODUCT DATA SHEET XR SERIES GPS SYNCHRONIZED TIME SYSTEMS TM Time Synchronization Transmitters XR™ Series transmitters from Primex Wireless deliver the latest technology in time synchronization. Leveraging the precision of GPS satellite time, the XR Series transmitters wirelessly synchronize time for analog and digital clocks, timers and other time receivers throughout a facility. By taking advantage of the most effective wireless frequency, XR Series transmitters can efficiently penetrate commercial building materials to ensure all devices receive important time updates, even for Daylight Saving Time and after a power outage. XR Series transmitters can be configured with a variety of power output levels to provide coverage for a single facility or an entire campus. Industry Leading Features • Utilizes highly effective 72 MHz frequency • System diagnostics viewable on transmitter display • Optional Ethernet port for incorporating NTP Time Source • Internal memory backup of 8 hours 1-Watt Transmitter Flexible Configurations XR Series transmitters provide the flexibility to scale signal coverage from a single building to an entire campus and may be equipped for either GPS or NTP time sources. 1-Watt transmitters can be configured with an indoor antenna or an external roof mount antenna expanding coverage. Campus wide deployments are covered via 5 or 30-watt transmitters including an external roof mounted antenna and installation by a Primex Certified Installer. Part Number Power Antenna Type Time Source NTP Input GPS Input XR01IG 1 watt Attached internal XR01IM 1 watt Attached internal x XR01IN 1 watt Attached internal x XR01EG 1 watt External roof XR01EM 1 watt External roof x x x x XR01EN 1watt External roof x XR05EM 5 watt External roof x XR05EN 5 watt External roof x XR30EM 30 watt External roof x XR30EN 30 watt External roof x XR01R 1-watt repeater Attached internal x x x x * An installation add on option for 1-watt transmitters with external antenna. 5 or 30-Watt Transmitter 1-Watt Transmitter Specifications: 5/30-Watt Specifications: • 1-Watt maximum transmission (at transmitter) • Operating Frequency Range: 72 MHz • 72 MHz frequency range • 49 channels available (pre-programmed prior to shipping) • E nclosure Dimensions: 22”W (55.88cm) x 17”H (43.18cm) x 22”D (55.88cm) • Daylight saving time bypass switch • Approx. Weight: • Time zone adjustment switch (pre-programmed on XR01E prior to shipping) – 5W and 30W Model 55 lbs. (24.9kg) • LCD display for time, date, and signal verification – 120 VAC, 50/60 Hz, 6.0A Max • Dimensions: 17.0”L (43.2cm) x 12.0”W (30.5cm) x 1.7”D (4.32cm) • Oversized heat sink provides adequate cooling • Power Supply: • Amplifier Output Bandwidth: >20 MHz maximum – Input: 120 VAC, 50/60 Hz, 0.6 Amp • Connector at Antenna: N-male – Output: 9 VDC, 2.78 Amp (6 ft. cord, 1.83cm) • 100’ of cabling between transmitter and antenna • Power Supply Requirements: • Operating Range: 32°- 122°F (0° - 50°C) Front Transmitter with Outdoor Ground Plane Antenna (XR01E) W • Cabling: 100’ (30.48m) between transmitter H and antenna provided • FCC Part 90 Accepted Back • IC RSS-119 Accepted D • Weight: 8.25 lbs. (3.75kg) Transmitter with Indoor Antenna (refer to Figure 1) • Antenna: 46.0”L (116.8cm) Outdoor Ground Plane Antenna Specifications: Figure 1 W • Weight: 7 lbs. (3.18kg) • Dimensions: 29.4”H (74.7cm) x 41.5”W (105.41cm) D Caution Satellite Repeater L • Lightning Protection: Direct Ground • Requires installation of a GPS Transmitter in order to receive and transmit the GPS or NTP time signal • Transmitting Antenna: 46.0”L (116.8cm) GPS Receiver Specifications: • Weight: 7 lbs. (3.18kg) • Included with EM part-numbered transmitters • 10’ cable (3.05m) (50’-(15.24m), 100’-(30.48m), 150’-(45.72m), and 200’-(60.69m) foot extensions available) Receiver Switch Specifications: • Included with Satellite Repeater System • 5’ RS232 cable connects Receiver Switch to the Satellite Transmitter • Dimensions: 5.75”L (14.6cm) x 4.25”H (10.8cm) x 1.25”D (3.16cm) • Mounting bracket and hardware included for rooftop or window installation • Reciever Antenna: 11.5”L (29cm) • GPS Dimensions: 2.5”W (6.35cm) x .75”H (1.91cm) • Weight: 0.75 lb. (.34kg) • GPS Weight: 0.75 lb. (.34kg) • Operating Range: -32°- 158°F (-36° - 70°C) • Operating Range: -32°- 158°F (-30° - 70°C) L H W 4.5” (11.43cm) D H 3.5” (8.89cm) 1.4” (3.56cm) Primex Wireless US (800) 537-0464 / CAN (800) 330-1459 www.primexwireless.com Note: All specifications are subject to change without prior notice. July 11