Transcript
TimeZone™ Ultrasonic Alarm Clock Misting Diffuser
INSTRUCTIONS PARTS
FEATURES
CARE & MAINTENANCE
This Alarm Clock Diffuser uses ultrasonic technology to scent any room. 1. Display: Digital Clock with clear LED time display, timer options and a sounding alarm system
Be sure the unit is OFF and disconnected from the electrical outlet before filling with water or when cleaning.
2.
Water Capacity: 220 mL (7.4 fl oz)
3.
Suggested Area: 300-400 sq ft
4.
Continuous Operation: Up to 6 hours Intermittent Operation: Up to 12 hours
Do not put water into the diffuser through the Mist Outlet. When not in use, drain and rinse the Water Tank thoroughly. Dry with a soft cloth to avoid mineral buildup. To remove possible buildup, gently use a cotton swab dipped in white vinegar to wipe out the inside. * SpaRoom® KLENZOR™ tablets may be used to renew diffuser to like-new condition.
5.
Light Mode: Rotating, solid color, OFF
6.
Automatic Shutoff Timer: 30/60/120/180 minute options for misting function
7.
Alarm will sound for 5 minutes unless manually turned off
8.
Automatic safety shut-off
9.
Power: AC Adapter included, c UL us approved
Note: The vibration plate should not come in contact with any hard or sharp objects. Do not use strong cleaning agents. Essential oil should not come in contact with the exterior surface of the unit. Keep out of reach of children and pets.
INSTRUCTIONS FOR USE NOTE: Before first use, pull out the plastic tab on the back side of the unit from the Battery Compartment. 1.
Place the diffuser on a flat, level surface, and remove Top Cover.
2.
Fill the Water Tank with cool tap water up to the Max Fill Line.
3.
Add 10-15 drops of essential oil (not included) directly into the water in the tank. Use only 100% pure essential oil.
4.
Replace the Top Cover.
5.
Connect the AC Adapter to the DC Socket on the back of the diffuser. Then plug the Adapter into the wall outlet.
CONTROL PANEL SETTINGS st
nd
POWER : 1 Push = continuous mist, LED indicator light is green; 2 Push = intermittent mist, LED indicator light is amber; rd 3 Push = turns mist off completely, LED indicator light is off. LED TIME DISPLAY: Press and hold the Timer button
for 4 seconds to enter the setting mode (LED Time Display will flicker).
Touch the Alarm button to set the Hours. Touch the Light button to set the Minutes. Note: Press repeatedly to scroll through the Hours/Minutes when setting time. Touch the Timer button once to confirm the setting or the unit will set automatically in approximately 6 seconds. Alarm Clock: Press and hold the Alarm button
for 3 seconds to enter the setting mode (LED display will flicker).
Touch the Alarm button to set the Hours. Touch the Light button to set the Minutes. Note: Press repeatedly to scroll through the Hours/Minutes when setting alarm. Touch the Timer button once to confirm the setting or the unit will set automatically in approximately 6 seconds. Touch the Alarm button again to turn on the Alarm, LED indicator is green. Touch the Alarm button once again to turn off the Alarm, LED indicator is off. When the time you set for the alarm arrives, the device will sound for 5 minutes. The device and light will also turn on unless the Water Tank is empty. Touch any button to stop alarm sound, turning off the device and light. Light: Touch the Light button rd 3 Push = turns lights off. Timer: Touch the Timer button options and OFF.
st
nd
to select lighting mode. 1 Push = rotating color; 2 Push = maintains solid color; to set the duration of the mist. Touch button repeatedly to select 30/60/120/180 minute misting
