Preview only show first 10 pages with watermark. For full document please download

Tlsp-pb-12vtlsp-pb-12v - Surveillance

   EMBED


Share

Transcript

REMOTE CALL STATIONS LOUROE TLSP-PB-12V E TLSP-PB-12V REMOTE CALL STATION LECTRONIC S DESCRIPTION Model TLMC-PB-12V is a vandal resistant call station with a built-in microphone, speaker and call button, all mounted to an 11 gauge stainless steel faceplate. Pressing the call button activates the LOUROE Alarming Base Station (Models AP-4CS, AP-8CS, AP-12CS) and identifies the zone location. Once activated, the alarming base station can activate a camera, etc., plus provide bi-directional communications with the TLSP-PB-12V. The unit is designed for use in correctional facilities or in areas of high vandalism. The call button is flush with the faceplate to prevent damage. A special built-in tone path protects both the speaker and microphone from abuse. A 6" x 6" x 4" backbox is included. TLSP-PB-12V is compatible only with LOUROE Alarming Base Station AP-4CS, AP-8CS and AP-12CS. FEATURES + + + + APPLICATION Stairwells Elevator Cabs & Lobbies Building Peripherals MODEL TLSP-PB-12V + Parking Structures Gate Entrances Warehouses IMPORTANT NOTICE When this equipment is used as part of an audio monitoring system, the law requires that the public be given notice of AUDIO MONITORING ON THE PREMISES. A decal notice is included with each microphone shipped. AUDIO MONITORING On These Premises LOUROE E LECTRONIC S Federal Law References: Federal Regulations, US Code, Title 18. Crime and Criminal Procedure, Sec 2510. + Damage-resistant 11 gauge stainless steel faceplace. 3" speaker and microphone, internally mounted to a tone path for total protection. Special tamper-proof mounting hardware included. Vandal resistant pushbutton May be mounted up to 1,000 feet from base station. 6" x 6" x 4" backbox included. IMPORTANT: Specify if TLMC-12V is to be FLUSH or SURFACE mounted. SPECIFICATIONS (Microphone) Output impedance (mic only) Frequency response Current drain Line level output 600 unbalanced line 40 Hz to 15 kHz 4 mA 0 dB @ 1000 SPECIFICATIONS (Speaker) WIRING REQUIREMENTS 6 Conductor consisting of: + 3 Conductor shielded, 22 gauge + 3 Conductor unshielded, 18 gauge West Penn 2018 or equivalent 2W 70V constant 88 dB (from 4'@1W input) 8 300 Hz to 4 kHz 3 inches Faceplate dimensions for flush mount: (TLSP-PB-12V) Faceplate dimensions for surface mount: (TLSP-PB-12V) Backbox, both models (included) THE LEA 7" x 7" 6 ¼" x 6 ¼" 6" x 6" x 4" R E AUDIO IN M O 25 ORING IT SPECIFICATIONS (Mechanical) N D NOTE: Unshielded cable is not recommended for microphone connections. Speaker rating Input Acoustical output Voice coil impedance Frequency response Speaker size YEARS 197 9 200 4 LOUROE ELECTRONICS 7828 BURNET AVENUE, VAN NUYS, CA 91405 TEL (818) 994-6498 FAX (818) 994-6458 Website: www.louroe.com Email: [email protected] TLSP-PB-12V CS(pdf) 6/27/02