Preview only show first 10 pages with watermark. For full document please download

Tm-10-3530-205-24p

Rating
Date

October 2018
Size

645.9KB
Views

6,835
Categories

Home Domestic appliances Sewing & ironing Sewing machines

Transcript

TM 10-3530-205-24P TECHNICAL MANUAL ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR CLOTHING REPAIR SHOP, TRAILER MOUNTED MODEL: CRS NSN: 3530-01-133-3494 This copy is a reprint which includes current pages from Changes 1 through 3. HEADQUARTERS, DEPARTMENT OF THE ARMY 30 JANUARY 1986 TM 10-3530-205-24P C3 CHANGE HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D.C., 9 JULY 1992 NO. 3 Organizational, Direct Support and General Support Maintenance Repair Parts and Special Tools List for CLOTHING REPAIR SHOP, TRAILER MOUNTED MODEL: CRS NSN: 3530-01-133-3494 Approved for public release; distribution is unlimited TM 10-3530-205-24P, 30 January 1986, is changed as follows: 1. Remove and insert pages as indicated below. New or changed text material is indicated by a vertical bar in the margin. An illustration change is indicated by a miniature pointing hand. Remove pages 14-1 and Figure 15 15-1 and 15-2 I-1 and I-2 I-7 and I-8 1-17/(1-18 blank) Insert pages 14-1 and Figure 15 15-1 and 15-2 I-1 and I-2 I-7 and I-8 1-17/(1-18 blank) 2. Retain this sheet in front of manual for reference purposes. By Order of the Secretary of the Army: GORDON R. SULLIVAN General, United States Army Chief of Staff Official: MILTON H. HAMILTON Administrative Assistant to the Secretary of the Army 02004 DISTRIBUTION: To be distributed in accordance with DA Form 12-25E, qty rqr block no. 0320. TM 10-3530-205-24P C2 CHANGE HEADQUARTERS, DEPARTMENT OF THE ARMY WASHINGTON, D.C., 9 October 1990 NO.2 Organizational, Direct Support and General Support Maintenance Repair Parts and Special Tools List for CLOTHING REPAIR SHOP, TRAILER MOUNTED MODEL: CRS NSN: 3530-01-133-3494 Approved for public release; distribution Is unlimited TM 10-3530-205-24P, 30 January 1986, is changed as follows: 1. Remove and insert pages as indicated below. The asterisk (*) to the left of the ITEM NO. Column adjacent to the line item indicates the current change. An illustration change is indicated by a miniature pointing hand. Remove pages Insert pages 15-1 and 15-2 15-1 and 15-2 2. Retain this sheet in front of manual for reference purposes. By Order of the Secretary of the Army CARL E. VUONO General, United States Army Chief of Staff Official: THOMAS F. SIKORA Brigadier General, United States Army The Adjutant General DISTRIBUTION; To be distributed in accordance with DA Form 12-25E, (Qty rqr bl no. 0320). TM 10-3530-205-24P C1 CHANGE NO. 1 } HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D.C., 22 June 1988 Organizational, Direct Support and General Support Maintenance Repair Parts and Special Tools List for CLOTHING REPAIR SHOP, TRAILER MOUNTED MODEL: CRS NSN: 3530-01-133-3494 TM 10-3530-205-24P, 30 January 1986, is changed as follows: 1. Remove and insert pages as indicated below. The asterisk (*) to the left of the ITEM NO. Column adjacent to the line item indicates the current change. An illustration change is indicated by a miniature pointing hand. Remove pages Insert pages 3-1 and Figure 4 I-17/I-18 3-1 and Figure 4 I-17/I-18 2. Retain this sheet in front of manual for reference purposes. By Order of the Secretary of the Army: CARL E. VUONO General, United States Army Chief of Staff Official: R. L. DILWORTH Brigadier General, United States Army The Adjutant General DISTRIBUTION: To be distributed in accordance with DA Form 12-25A, Unit, Direct Support and General Support Maintenance requirements for Clothing Repair Shop, Trailer Mounted, Model CRS. TM 10-3530-205-24P TECHNICAL MANUAL HEADQUARTERS DEPARTMENT OF THE ARMY Washington, D.C. 30 January 1986 NO. 10-3530-205-24P Organizational, Direct Support and General Support Maintenance Repair Parts and Special Tools List For CLOTHING REPAIR SHOP, TRAILER MOUNTED MODEL: CRS NSN 3530-01-133-3494 Current as of 29 September 1985 REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS. You can help improve this manual. If you find any mistakes or if you know of a way to improve the procedures, please let us know. Mail your letter, DA Form 2028 (Recommended Changes to Publications and Blank Forms) or DA Form 2028-2 located in the back of this manual direct to: Commander, U.S. Army Troop Support Command, ATTN: AMSTR-MCTS, 4300 Goodfellow Blvd., St. Louis, MO 631201798. A reply will be furnished to you. TABLE OF CONTENTS Section I Section II Group 00 Group 01 Group 02 Group 03 Group 04 Group 05 Group 06 Group 07 Group 08 Group 09 Page INTRODUCTION ..................................................................................................... 1 REPAIR PARTS LIST .............................................................................................. 1-1 Clothing Repair Shop, Trailer Mounted..................................................................... 1-1 Cabinet Assembly .................................................................................................... 1-1 Lifting Eye Assembly................................................................................................ 2-1 Rear Door Assembly ................................................................................................ 3-1 Side Door Assembly................................................................................................. 4-1 Storage Box Assembly ............................................................................................. 5-1 Needles, Bobbin and Belting .................................................................................... 6-1 Winder, Unwinder, Oil Can and Shears .................................................................... 7-1 Presses, Chucks, Dies and Lights............................................................................. 8-1 Power Cable ............................................................................................................ 9-1 Table Top, Darning Machine .................................................................................... 10-1 Table Top, Button Sewing Machine .......................................................................... 11-1 Table Top, Clothing Machine.................................................................................... 12-1 Folding Table Assembly ........................................................................................... 13-1 Tray Assembly, Clothing, Darning and Button .......................................................... 14-1 Clothing Machine External Parts .............................................................................. 15-1 Lubrication System................................................................................................... 16-1 Tension and Feed Mechanism ................................................................................. 17-1 Pulley, Shaft, and Needle Bar .................................................................................. 18-1 Presser Foot and Bobbin Mechanism ....................................................................... 19-1 Darning Machine Top Arm ....................................................................................... 20-1 Darning Machine Head Top Arm Shaft and Housing................................................. 21-1 Darning Machine Middle and Bottom Base............................................................... 22-1 Darning Machine Hook Assembly............................................................................. 23-1 i Illus. Figure 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 TM 10-3530-205-24P TABLE OF CONTENTS (Cont) Page Group 10 Group 11 Group 12 Group 13 Group 14 Group 15 Section III Section IV Button Machine Head Assembly............................................................................... 24-1 Needle Bar Drive Assembly ..................................................................................... 25-1 Clamp Lift and Thread Slack Mechanism ................................................................. 26-1 Stopping Mechanism Assembly................................................................................ 27-1 Stand Assembly ....................................................................................................... 28-1 Pulley Assembly, Manual ......................................................................................... 29-1 Stand and Chair Holddown Assembly....................................................................... 30-1 Track Assembly, Generator...................................................................................... 31-1 Fire Extinguisher ...................................................................................................... 32-1 Holddown Clamp Assembly...................................................................................... 33-1 SPECIAL TOOLS LIST (Not applicable) NATIONAL STOCK NUMBER, PART NUMBER INDEX........................................... I-1 ii Illus. Figure 24 25 26 27 28 29 30 31 32 33 TM 10-3530-205-24P ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST Section I. INTRODUCTION 1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special test, measurement, and diagnostic equipment CMDE); and other special support equipment required for performance of organizational, direct support, and general support maintenance of the Clothing Repair Shop. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR) codes. 2. GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided into the following sections: a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence. Repair parts kits are listed separately in their own functional group within Section II. Repair parts for repairable special tools are also listed in this section. Items listed are shown on the associated illustration(s)/figure(s). b. Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE column) for the performance of maintenance. c. Section IV. National Stock Number and Part Number Index. A list, in National item identification number (NIIN) sequence, of all National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration figure and item number appearance. 3. EXPLANATION OF COLUMNS (SECTIONS II AND III). a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration. b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5position code containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as shown in the following breakout: 1 TM 10-3530-205-24P Source Code XX Maintenance Code Recoverability Code XX X 1st two positions How you get an item 3d position 4th position Who can install replace or use the item Who can do complete repair* on the item 5th pos. Who determines disposition action on an unserviceable item *Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the "Repair" function in a use/user environment in order to restore serviceability to a failed item. (1) Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul of an end item/equipment. Explanations of source codes follows: Code Explanation PA PB PC** PD PE PF PG Stocked items; use the applicable NSN to request/requisition items with these source codes. They are authorized to the category indicated by the code entered in the 3d position of the SMR code. > KD KF KB > **NOTE: Items coded PC are subject to deterioration. MO-(Made at org/ AVUM Level) MF-(Made at DS/ AVIM Level) MH-(Made at GS > Level) ML-(Made at Specialized Repair Activity (SRA)) MD-(Made at Depot) AO-(Assembled by org/AVUM Level) AF-(Assembled by DS/AVIM Level) AH-(Assembled by GS Level) > AL-(Assembled by SRA) AD-(Assembled by Depot) Items with these codes are not to requested/requisitioned individually. They are part of a kit which is authorized to the maintenance category indicated in the 3d position of the SMR code. The complete kit must be requisitioned and applied. Explanation Items with these codes are not to be requested/requisitioned individually. They must be made from bulk material which is identified by the part number in the DESCRIPTION and USABLE ON CODE (UOC) column and listed in the Bulk Material group of the repair parts list in the RPSTL. If the item is authorized to you by the 3d position code of the SMR code, but the source code indicates it is made at a higher level, order the item from the higher level of maintenance. Explanation Items with these codes are not to be requested/requisitioned individually. The parts that make up the assembled item must be requisitioned or fabricated and assembled at the level of maintenance indicated by the source code. If the 3d position code of the SMR code authorizes you to replace the item, but the source code indicates the items are assembled at a higher level, order the item from the higher level of maintenance. 2 TM 10-3530-205-24P Code Explanation XA- Do not requisition an "XA" -coded item. Order its-next higher assembly. (Also, refer to the NOTE below.) XB- If an "XB" item is not available from salvage, order it using the FSCM and part number given. XC- Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturer's part number. XD- Item is not stocked. Order an "XD" -coded item through normal supply channels using the FSCM and part number given, if no NSN is available. NOTE Cannibalization or controlled exchange, when authorized, may be used as a source of supply for items with the above source codes, except for those source coded "XA" or those aircraft support items restricted by requirements of AR 700-42. (2) Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the SMR Code as follows: (a) The maintenance code entered in the third position tells you the lowest maintenance level authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to one of the following levels of maintenance. Code Application/Explanation C -Crew or operator maintenance done within organizational or aviation unit maintenance. 0 -Organizational or aviation unit category can remove, replace, and use the item. F -Direct support or aviation intermediate level can remove, replace, and use the item. H -General support level can remove, replace, and use the item. L -Specialized repair activity can remove, replace, and use the item. D -Depot level can remove, replace, and use the item. (b) The maintenance code entered in the fourth position tells whether or not the item is to be repaired and identifies the lowest maintenance level with the capability to do complete repair (i.e., perform all authorized repair functions.) NOTE: Some limited repair may be done on the item at a lower level of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes. This position will contain one of the following maintenance codes. Code Application/Explanation 0 -Organizational or (aviation unit) is the lowest level that can do complete repair of the item. F -Direct support or aviation intermediate is the lowest level that can do complete repair of the item. 3 TM 10-3530-205-24P Code Application/Explanation H D -General support is the lowest level that can do complete repair of the item. -Specialized repair activity (designate the specialized repair activity) is the lowest level that can do complete repair of the item. -Depot is the lowest level that can do complete repair of the item. Z -Nonreparable. No repair is authorized. B -No repair is authorized. (No parts or special tools are authorized for the maintenance of a "B" coded item). However, the item may be reconditioned by adjusting, lubricating, etc., at the user level. L (3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows: Recoverability Code Z 0 F H D L A Application/Explanation -Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in 3d position of SMR Code. -Reparable item. When uneconomically reparable, condemn and dispose of the item at organizational or aviation unit level. -Reparable item. When uneconomically reparable, condemn and dispose of the item at the direct support or aviation intermediate level. -Reparable item. When uneconomically reparable, condemn and dispose of the item at the general support level. -Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item not authorized below depot level. -Reparable item. Condemnation and disposal not authorized below specialized repair activity (SRA). -Item requires special handling or condemnation procedures because of specific reasons (e.g., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. c. FSCM (Column (3)). The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. d. PARTNUMBER (Column (4)). Indicates the primary number used by the manufacturer, (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. 4 TM 10-3530-205-24P NOTE When you use a NSN to requisition an item, the item you receive may have a different part number from the part ordered. e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following information: (1) The Federal item name and, when required, a minimum description to identify the item. (2) The physical security classification of the item is indicated by the parenthetical entry, e.g., Phy Sec C1 - Confidential, Phy Sec C1 (S)-Secret, Phy Sec C1 (T)- Top Secret. (3) Items that are included in kits and sets are listed below the name of the kit or set. (4) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry. (5) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be manufactured/fabricated. (6) When the item is not used with all serial numbers of the same model, the effective serial numbers are shown on the last line(s) of the description (before UOC). (7) The usable on code, when applicable (see paragraph 5, Special Information). (8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each special tool, special TMDE, and other special support equipment. When density of equipment supported exceeds density spread indicated in the basis of issue, the total authorization is increased proportionately. (9) The statement "END OF FIGURE" appears below the last item description in Column 5 for a given figure in both Section II and Section III. f. QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a quantity indicates that the quantity is variable and may vary from application to application. 4. EXPLANATION OF COLUMNS (SECTION IV). a. NATIONAL STOCK NUMBER (NSN) INDEX. (1) STOCK NUMBER column. This column lists the NSN by National item identification number NSN (NIIN) sequence. The NIIN consists of the last nine digits of the NSN, i.e. (5305-01-574-1467). NIIN When using this column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSN should be used when ordering items by stock number. (2) FIG. column. This column lists the number of the figure where the item is identified/located. The figures are in numerical order in Section II and Section III. (3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG. column. This item is also identified by the NSN listed on the same line. 5 TM 10-3530-205-24P b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group. in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order). (1) FSCM column. The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. (3) STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer identified in the PART NUMBER and FSCM columns to the left. (4) FIG. column. This column lists the number of the figure where the item is identified/located in Sections II and III. (5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in adjacent figure number column. 5. SPECLAL INFORMATION. a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column heading. Usable on codes are shown as "UOC: ....." in the Description Column justified left) on the first line applicable item description/nomenclature. Uncoded items are applicable to all models. b. ASSOCIATED PUBLICATIONS. The publication listed below pertains to the Clothing Repair Shop and its components. Publication Short Title LO 10-3530-205-12-1 LO 10-3530-205-12-2 LO 10-3530-205-12-3 LO 10-3530-205124 TM 10-3530-205-12 Lubrication Order: Clothing Machine Lubrication Order: Darning Machine Lubrication Order: Button Machine Lubrication Order: Bobbin Winder Clothing Repair Shop, Trailer Mounted 6. HOW TO LOCATE REPAIR PARTS. a. When National Stock Number or Part Number is NOT Known. (1) First. Using the table of contents, determine the assembly group to which the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are divided into the same groups. (2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs. (3) Third. Identify the item on the figure and note the item number. (4) Fourth. Refer to the Repair Parts List for the figure to find the part number for the item number noted on the figure. (5) Fifth. Refer to the Part Number Index to find the NSN, if assigned. 6 TM 10-3530-205-24P b. When National Stock Number or Part Number is Known: (1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinent National Stock Number or Part Number. The NSN index is in National Item Identification Number (NIIN) sequence (see 4a(1)). The part numbers in the Part Number index are listed in ascending alphanumeric sequence (see paragraph 4b). Both indexes cross-reference you to the illustration figure and item number of the item you are looking for. (2) Second. After finding the figure and item number, verify that the item is the one you are looking for, then locate the item number in the repair parts list for the figure. 7. ABBREVIATIONS. Abbreviations used in this manual are listed in MIL-STD-12. 7/(8 blank) TM 10-3530-205-24P Figure 1. Cabinet Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 00 CLOTHING REPAIR SHOP TRAILER MOUNTED GROUP 01 CABINET ASSEMBLY FIG. 1 CABINET ASSEMBLY 1 2 3 4 5 6 XAFHH XAHHH XAFHH PAFZZ PAFZZ PAOZZ 81337 81337 81337 81337 96906 96906 6-1-1100 6-1-1101 6-1-1103 6-1-1103-2-68 MS20470A4-7 MS21313-162 7 PAOZZ 81337 6-1-1103-2-78 8 9 10 PAOZZ PAOZZ PAOZZ 96906 96906 96906 MS15795-710 MS35338-44 MS35649-2255 CABINET ASSY COMPLETE ................................ .FRAMEWORK ASSEMBLY.................................. .PANEL-AND DOOR ASSY ................................... ..LATCH,RIM......................................................... ..RIVET,SOLID...................................................... PADLOCK SET 4 PADLOCKS,KEYED ALIKE, 2 KEYS PER SET,W/CLEVIS & CHAIN................. SCREW,MACHINE SLTD,1/4-20 UNC X 3/4 L BRASS............................................................... WASHER,FLAT..................................................... WASHER,LOCK.................................................... NUT,PLAIN,HEXAGON ......................................... END OF FIGURE 1-1 1 1 1 2 4 1 4 4 4 4 TM 10-3530-205-24P Figure 2. Lifting Eye Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 01 CABINET ASSEMBLY FIG. 2 LIFTING EYE ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 XDOFF XAOFF XAOZZ XAOZZ XAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ 81337 81337 81337 81337 81337 96906 96906 96906 96906 96906 96906 96906 96906 81337 81337 81337 6-1-1108-6 6-1-1108-6-1 6-1-1108-6-2 6-1-1108-6-3 6-1-1108-6-4 MS90728-115 MS51967-14 MS35338-48 MS90728-164 MS51967-20 MS35338-50 MS35206-243 MS35338-42 6-1-1108-6-15 6-1-1108-6-5 6-1-1108-6-12 .LIFTING EYE ASSY ............................................. ..LOOP,LIFTING EYE ........................................... ..PLATE,LIFTING EYE .......................................... ..BACKING PLATE,SMALL.................................... ..BACKING PLATE,LARGE ................................... ..SCREW,CAP,HEX HD ........................................ ..NUT,PLAIN,HEXAGON 1/2-13 UNC- 2B ............. ..WASHER,LOCK SPLIT HELICAL,1/2: ................. ..SCREW,CAP,HEX HD 5/8-11 UNC 2A,2 IN LG ... ..NUT,PLAIN,HEXAGON 5/8-11 UNC 2B............... ..WASHER,LOCK SPLIT HELICAL 518 ................. ..SCREW,MACHINE #8-32 UNC-2A,3/8 IN LONG. ..WASHER,LOCK.................................................. ..RETAINER,SPRING............................................ ..CLIP,SPRING TENSION ..................................... ..SHIM................................................................... END OF FIGURE 2-1 1 1 1 1 1 3 3 3 1 1 1 2 2 1 1 1 TM 10-3530-205-24P Figure 3. Rear Door Assembly. TM 10-3530-205-24P, C01 SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 01 CABINET ASSEMBLY FIG. 3 REAR DOOR ASSEMBLY 1 2 3 4 5 6 7 8 9 10 PAFHH PAFZZ PAFZZ PAFZZ PAFZZ PAFHH PAOZZ PAOZZ PAOZZ MFFZZ 81337 81337 96906 96906 96906 81337 96906 96906 96906 81337 6-1-1103-2-25 6-1-9744 MS35206-244 MS35649-282 MS35338-42 6-1-1103-2-36 MS90725-62 MS15795-814 MS51922-17 6-1-1103-2-27 11 12 PAFZZ PAFZZ 81337 96906 6-1-1103-2-67 MS20470A4-9 ..DOOR, REAR ..................................................... ...LOCK, SLAM TYPE FOLDING HANDLE ............ ...SCREW, MACHINE #8-32 UNC-2A X 7/16 LG ... ...NUT, PLAIN, HEXAGON #8-32 UNC-2B ............ ...WASHER, LOCK................................................ ...STAY, REAR DOOR .......................................... ...SCREW, CAP, HEX HD ..................................... ...WASHER, FLAT................................................. ...NUT, SELF-LOCKING, HEX............................... ...GASKET MAKE FROM NSN 5330-00-961-4239, REQUIRES 15 FT CUT FROM BULK .................... ..LATCH, LOCKING DOOR ................................... ..RIVET, SOLID..................................................... END OF FIGURE 3-1 1 2 6 6 6 2 6 12 6 15 2 4 TM 10-3530-205-24P Figure 4. Side door Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 01 CABINET ASSEMBLY FIG. 4 SIDE-DOOR ASSEMBLY 1 2 3 4 5 6 PAFHH PAOZZ PAOZZ PAOZZ PAOZZ MFFZZ 81337 81337 96906 96906 96906 81337 6-1-1103-2-23 6-1-1103-2-34 MS90725-62 MS15795-814 MS51922-17 6-1-1103-2-27 7 8 9 10 11 12 13 PAFZZ PAFZZ PAFZZ PAFZZ PAFZZ PAFZZ PAFHH 81337 96906 81337 96906 96906 96906 81337 6-1-1103-2-62 MS20470-A4-7 6-1-1103-2-32 MS35338-42 MS35206-244 MS35649-282 6-1-1103-2-24 ..DOOR,SIDE,FRONT ........................................... ...STAY,DOOR,SIDE,FRT ..................................... ...SCREW,CAP,HEX HD ....................................... ...WASHER,FLAT.................................................. ...NUT,SELF-LOCKING, HEX................................ ...GASKET MAKE FROM NSN 5330-00-961-4239, LENGTH AS REQUIRED ................................... ...LATCH,LOCKING DOOR ................................... ...RIVET,SOLID 1/8 DIA X 7/16 LG ....................... ...LOCK,SLAM TYPE FOLDING HANDLE ............. ...WASHER,LOCK................................................. ...SCREW,MACHINE #8-32 UNC-2A X 7/16 LG .... ...NUT,PLAIN,HEXAGON ...................................... ...DOOR,SIDE,REAR ............................................ END OF FIGURE 4-1 1 1 1 2 1 12 2 4 2 6 6 6 1 TM 10-3530-205-24P Figure 5. Storage Box Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 02 STORAGE BOX ASSEMBLIES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 XDFFZ XDFZZ PAFZZ XDFZZ PAFZZ XDFZZ PAFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ 81337 81337 96906 81337 96906 96906 96906 81337 81337 81337 81337 81337 81337 81337 81337 6-1-1116-31 6-1-1116-31-6 MS20470A4-6 6-1-1116-31-5 MS20470 A4-6 MS35791-22 MS20426B7-7 6-1-6399-4 6-1-6399-5 6-1-6399-6 6-1-6399-7 6-1-6399-8 6-1-6399-9 6-1-6399-10 6-1-6399-11 FIG. 5 STORAGE BOX ASSEMBLY BOX ASSY............................................................ .LATCH................................................................. .RIVET,SOLID 1/8 DIA X 3/8 LG ........................... .HOOK .................................................................. .RIVET,SOLID 1/8 DIA X 3/8 LG ........................... .HANDLE,BAIL CHEST ......................................... .RIVET,CSK HD .................................................... .PLATE,ID............................................................. .PLATE,ID............................................................. .PLATE,ID............................................................. .PLATE,ID............................................................. .PLATE,INSTRUCTION......................................... .PLATE,INSTRUCTION......................................... .PLATE,INSTRUCTION......................................... .PLATE,INSTRUCTION......................................... END OF FIGURE 5-1 1 2 8 2 4 2 10 1 1 1 1 1 1 1 1 TM 10-3530-205-24P Figure 6. Needles, Bobbin, and Belting. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 02 STORAGE BOX ASSEMBLIES FIG. 6 NEEDLES, BOBBIN AND BELTING 1 PAOZZ 77948 16X175-18 2 PAOZZ 11598 135X1X20 3 PAOZZ 77948 16X257-16 4 PAOZZ 77948 16X257-18 5 6 PAOZZ PAOZZ 77948 77948 135X1-18 135X1-20 7 8 9 10 11 12 13 PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PDOZZ PDOZZ 77948 11598 98255 77948 11598 11598 81349 14 PAOZZ 81348 40264 2DL2-77 2DL8-5 52237 543-133 543-226 PARA 3.4.6 OF ML C-40153J KRB211,TYPE I NEEDLE,SEWING MACHINE BUTTON, 175 X 3, SIZE 18........................................................ NEEDLE,SEWING MACHINE BUTTON, 175X3, SIZE 20................................................ NEEDLE,SEWING MACHINE CLOTHING, 16 X 257, SIZE 16.................................................... NEEDLE,SEWING MACHINE CLOTHING 16X 257, SIZE 18.................................................... NEEDLE,SEWING MACHINE................................ NEEDLE,SEWING MACHINE DARNING, 135 X 1, SIZE 20........................................................ BOBBIN,HOOK ..................................................... HOOK,SEWING.................................................... HOOK,BOBBIN ..................................................... CASE,BOBBIN SEWING MACHINE ...................... LOOPER............................................................... LIFTER,CHAIN ASSY............................................ .BOARD,SLEEVE WITH COVER .......................... .BELTING,ROUND,LEATHER CUT TO LENGTH .. END OF FIGURE 6-1 1 1 1 1 1 1 1 1 1 1 1 2 1 32 TM 10-3530-205-24P Figure 7. Winder, Unwinder, Oil Can and Shears TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 02 STORAGE BOX ASSEMBLIES FIG. 7 WINDER, UNWINDER, OIL CAN AND SHEARS 1 2 3 4 5 6 PBOZZ PBOZZ PDOZZ PBOZZ PDOZZ XDOBO 21305 11598 77948 81348 11598 81348 505656 2-543-08-03 225381 GGG0591 2-552-08-01 CGG-S-00278 TYPE I,STYLE A,CLASS2 THREAD UNWINDER ........................................... THREAD UNWINDER SGL ................................... WINDER,BOBBIN ................................................. OILER,HAND,4" SPOUT 1/2 PT ............................ TRAY ASSY,BUTTON........................................... 1 1 1 1 1 SHEARS,BENT TRIMMER .................................... 1 END OF FIGURE 7-1 TM 10-3530-205-24P Figure 8. Presses, Chucks, Dies and Lights. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 02 STORAGE BOX ASSEMBLIES FIG. 8 PRESSES, CHUCKS, DIES AND LIGHTS 1 MFFFZ 81337 2 3 4 PAOZZ PAOZZ PAOZZ 81337 81337 81337 6-1-1111-16 THRU 21 6-1-1111-27-16 6-1-1111-27-20 6-1-1111-27-18 5 PAOZZ 81337 6-1-1111-27-21 6 PAOZZ 81349 7 PAOZZ 58536 MIL-W-5086/1B M5 086/1-10-9 A-A-632 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 XDOZZ PAOZZ PAOZZ PAOZZ PAOZZ XDOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ 65051 19207 81902 81902 81902 83058 81902 61864 83058 61864 61864 61864 83058 61864 61864 AE24578D-17 51201000141 A4701178 A4701179 A4701177 M369 A471195 9470 9323 9471 1486 1587 9219R 1580 9447 CORD,LIGHT,ASSY MAKE FROM,6-1-1111-27-16,61-1111-27-18,6-1-1111-27-20,6-1-1111-27-21....... .CONNECTOR,PLUG,ELECTRIC.......................... .LIGHT,EXTENSION ............................................. .CABLE,#16 STRANDED 3 CONDUCTOR 50 FT 600V.............................................................. .LAMP,INCANDESCENT,ROUGH SERVICE, 100 W,100V........................................................ WIRE,GROUND,#10 STRANDED,SINGLE CONDUCTOR....................................................... FLATIRON,ELECTRIC STEAM & DRY, 120V 11000W ..................................................... MACHINE,TACK-BUTTON ATTACHING ............... .DIE,UPPER.......................................................... .DIE,LOWER......................................................... .DIE,LOWER......................................................... .DIE,UPPER OPEN ............................................... .PRESS,GROMMET,EYELET................................ .DIE,WASHER,FASTENER ................................... .CHUCK ................................................................ .CHUCK ................................................................ .DIE,CLINCH PLATE............................................. .PUNCH,STUD FASTENER................................... .DIE,EYELET ........................................................ .CHUCK,STUD...................................................... .CHUCK,SOCKET................................................. .CHUCK,STUD...................................................... .. END OF FIGURE 8-1 1 1 1 50 1 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10-3530-205-24P Figure 9. Power Cable. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 02 STORAGE BOX ASSEMBLIES FIG. 9 POWER CABLE 1 MOOOF 81337 6-1-1111-27 2 PAOZZ 81337 6-1-1111-27-9 3 4 5 PAOZZ PAOZZ PBOZZ 81337 81337 81337 6-1-1111-27-10 6-1-1111-27-5 6-1-1111-27-2 6 7 8 PAOZZ PAOZZ MOOOF 81337 81348 81337 6-1-1111-27-6 WC596/12-4 6-1-1111-27 9 10 11 12 PAOZZ PAOZZ PAOZZ XDOZZ 81337 81337 81337 81337 6-1-1111-27-3 6-1-1111-27-4 6-1-1111-27-11 6-1-1111-27-12 13 PAOZZ 81337 6-1-1111-27-22 CABLE ASSY MAKE FROM 6-1-1111-27-9,6-1-111127-10,6-1-1111-27-5,61 -1111-27-2,6-1-1111-27-6, WC596/12-4.......................................................... .CABLE,ELECTRICAL 3 CONDUCTOR 600V RUBBER COVERED 25 FT LG ........................... .COVER,DUPLEX ALUMINUM, KILLARK #2FA..... .CONNECTOR,PLUG,ELECTRIC 3 WIRE............. .BOX CONNECTOR,ELECTRIC .750 MAX DIA THOMAS & BETTS NO 2535 .............................. .BOX,2 GANG ALUMINUM KILLARK #2FD-2 ........ .CONNECTOR,RECEPTACLE P&S #5262............ .CABLE ASSY MAKE FROM 6-1-1111-27-3,6-1-111127-4,6-1-1111-27-11,6-1-1111-27-12,6-1-1111-27-22 .BOX,3 GANG ALUMINUM,KILLARK #3FD-Q ....... .RECEPTACLE,TWIST LOCK F & S #7310........... .COVER,PLUG ALUMINUM KILLARK #1FR .......... .PLATE,INSTRUCTION AL TYPE H STYLE III ADH BACKED..................................................... .CONNECTOR,RECEPTACLE .900 MAX DIA PYLE-NAT DB-1413............................................ END OF FIGURE 9-1 3 75 3 3 3 3 6 1 1 3 1 1 1 TM 10-3530-205-24P Figure 10. Table top, Darning Machine. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 03 TABLE TOP ASSEMBLY, DARNING MACHINE FIG. 10 TABLE TOP,DARNING MACHINE 1 2 3 4 5 6 7 8 9 10 PDOZZ PAOZZ XDOZZ PAOZZ XDOZZ PBOZZ PAOZZ PAOZZ XDOZZ PAFZZ 81337 96906 81337 19204 81337 81337 96906 96906 81337 77948 6-1-6386 MS35494-85 6-1-6386-9 11020947-14 6-1-6389-4 6-1-6386-8 MS35493-77 MS35493-226 6-1-6399-2 2231602-01 11 12 13 14 15 16 17 PAOZZ PAFZZ PBFZZ PBFZZ PAOZZ PBOZZ XDOZZ 81337 96906 81337 81337 08807 81337 81337 6-1-6386-4 MS35495-124 6-1-6389-8 81337 17R20 6-1-6387-1 6-1-6394-7 TABLE TOP ASSY, DARNING .............................. .SCREW,WOOD SLOTTED,NO 10X1.00L ............ .BASE,THREAD UNWINDER ................................ .STRAP,BUCKLE AND TIP.................................... .INSERT,KNIFE THREAD 1 IN L, BRASS.............. .BOBBIN WINDER ................................................ .SCREW,WOOD NO 12 X .88 L............................ .SCREW,WOOD SLOTTED NO 6 X .75L .............. .PLATE,ID............................................................. .MOTOR,ALTERNATING C 1/3 HP,115V 60HZ MODEL CAP-DSM....................................... .PULLEY,GROOVE............................................... .SCREW,WOOD NO 14X.75L............................... .BOX,SWITCH ...................................................... .LAMP ASSEMBLY ............................................... .LAMP,INCANDESCENT ....................................... .TABLE TOP,DARNING ........................................ .KNEE,LEVER ASSY............................................. END OF FIGURE 10-1 1 3 1 1 4 1 2 2 1 1 1 1 1 1 1 1 1 TM 10-3530-205-24P Figure 11. Table Top, Button Sewing Machine. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 04 TABLE TOP ASSEMBLY,BUTTON SEWING MACHINE FIG. 11 TABLE TOP, BUTTON SEWING MACHINE 1 2 3 4 5 6 7 8 9 10 11 12 PDOZZ PAOZZ XDOZZ PBFZZ PBFZZ PAOZZ PAOZZ PBOZZ PAOZZ PAOZZ PAOZZ PAOZZ 81337 96906 81337 81337 81337 08807 19204 81337 96906 96906 96906 77948 6-1-6389 MS35493-226 6-1-6399-3 6-1-6389-8 6-1-6389-23 17R20 11020947-14 6-1-6389-1 MS90725-34 MS35338-46 MS27183-13 4031602-04 13 14 15 16 17 XDOZZ XDOZZ PAOZZ PAFZZ XDOZZ 77948 77948 96906 96906 81337 6-1-6389-10 6-1-6389-4 MS35494-100 MS35495-124 6-1-6389-9 TABLE TOP ASSY ................................................ .SCREW,WOOD................................................... .PLATE,ID............................................................. .BOX,SWITCH ...................................................... .LAMP ASSEMBLY ............................................... ..LAMP,INCANDESCENT ...................................... .STRAP,BUCKLE AND TIP.................................... .TABLE TOP ......................................................... .BOLT,MACHINE 312-18 UNC-2A X 1.00 L ........... .WASHER,LOCK................................................... .WASHER,FLAT.................................................... .MOTOR,ALTERNATING C 1/3 HP,115 VOLT 60 HZ.......................................................... .PULLEY ............................................................... .INSERT................................................................ .SCREW,WOOD................................................... .SCREW,WOOD NO 14X.75 L.............................. .BASE,THREAD UNWINDER ................................ END OF FIGURE 11-1 1 2 1 1 1 1 1 1 4 4 4 1 1 8 3 2 1 TM 10-3530-205-24P Figure 12. Table Top, Clothing Machine. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 05 TABLE TOP ASSEMBLY, CLOTHING SEWING MACHINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PDOZZ PAOZZ XDOZZ XDOZZ XBOZZ PAOZZ PAOZZ PAOZZ XDOZZ PAOZZ PDOZZ PAOZZ XDOZZ PAFZZ 81337 96906 81337 81337 81337 81337 08807 96906 81337 96906 77948 96906 81337 77948 6-1-6383 MS35494-100 6-1-6383-6 6-1-6383-7 6-1-6383-9 6-1-6389-23 17R20 MS35494-85 6-1-6383-11 MS34494-95 225453-30 MS35493-226 6-1-6383-20 2231602-01 15 16 17 18 19 20 21 22 PAOZZ PAOZZ PBFZZ XDOZZ PAOZZ PBOZZ XDOZZ XDOZZ 81337 96906 81337 81337 19204 81337 81337 81337 6-1-6386-4 MS35495-124 6-1-6389-8 6-1-6389-4 11020947-14 6-1-6383-1 6-1-6394-7 6-1-6383-8 FIG. 12 TABLE TOP, CLOTHING MACHINE TABLE TOP ASSY, CLOTHING SEWING MACHINE .SCREW,WOOD NO 12 X 1.00 L .......................... .PLATE MACHINE HINGE..................................... .PAN,DRIP,OIL ..................................................... .PAD,RUBBER,MACHINE MT ............................... .LAMP ASSEMBLY ............................................... .LAMP,INCANDESCENT ....................................... .SCREW,WOOD................................................... .BASE THREAD UNWINDER ................................ .SCREW,WOOD NO 12 X.88 L............................. .BOBBIN WINDER ................................................ .SCREW,WOOD NO 6 X .75 L.............................. .PLATE ID............................................................. .MOTOR,ALTERNATING C 1/3 HP 115V 60HZ MODEL CAP -DSM...................................... .PULLEY,GROOVE............................................... .SCREW,WOOD NO 14 X .75 L............................ .BOX,SWITCH ...................................................... .INSERT KNIFE THREAD ..................................... .STRAP,BUCKLE AND TIP.................................... .TOP TABLE ......................................................... .KNEE LEVER ASSY............................................. .PIN,MACHINE REST............................................ END OF FIGURE 12-1 1 2 2 1 4 1 1 3 1 2 1 2 1 1 1 2 1 4 1 1 1 1 TM 10-3530-205-24P Figure 13. Folding Table Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 06 TABLE ASSEMBLY FOLDING FIG. 13 FOLDING TABLE ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PAOOO PAOZO XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ XAOZZ MOOZZ 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81377 81337 81337 81337 81337 6-1-1117 6-1-1117-23 6-1-1117-23-1 6-1-1117-23-2 6-1-1117-23-3 6-1-1117-23-4 6-1-1117-23-5 6-1-1117-23-6 6-1-1117-23-7 6-1-1117-23-29 6-1-1117-23-8 6-1-1117-23-9 6-1-1117-23-10 6-1-1117-23-11 6-1-1117-23-12 6-1-1117-23-13 17 PAOZZ 96906 MS35190-293 18 19 20 21 22 23 24 25 26 27 28 29 PAOZZ PAOZZ PAOZZ PAOZZ XDOZZ PAOZZ PAOZZ PAOZZ XAOZZ PAOZZ PAOZZ PAOZZ 96906 96906 96906 96906 81337 96906 96906 96906 81337 96906 96906 96906 MS35338-44 MS51967-2 MS35495-79 MS20613-8C8 6-1-1117-23-21 MS27183-10 MS35206-269 MS35649-202 6-1-1117-23-25 MS35425-41 MS35190-306 MS27183-13 TABLE,FOLDING .................................................. .LEG,FOLDING..................................................... .STIFFNER,TOP ................................................... ..LEG,RIGHT HAND.............................................. ..LEG,LEFT HAND ................................................ ..STAY,LEG,LONG R.H......................................... ..STAY,LONG,L.H ................................................. ..SPREADER,LEG ................................................ ..ANCHOR,LEG,L.H .............................................. ..ANCHOR,LEG,R.H ............................................. ..STAY,LEG,SHORT,L.H ....................................... ..STAY,LEG,SHORT,R.H . .................................... ..BRACE,KNEE,LEG ............................................. ..LATCH,LEG ........................................................ ..SLIDE,STAY ....................................................... .TOP,PLYWOOD, MAKE FROM 4FTX8FT 3/4 IN EXTERIOR GRADE PLYWOOD.......................... .SCREW,MACHINE FL CSK HD,SL,1/420 UNC-2AX1 1/2................................................ .WASHER,LOCK................................................... .NUT,PLAIN,HEXAGON 1/4X20UNC-2B ............... .SCREW,WOOD RD HD NO 8X3/4 LG ................. .RIVET,SOLID 1/4X11/2 LG .................................. .RIVET,SOLID CSK HD 1/4DIA X1/21N LG ........... .WASHER,FLAT.................................................... .SCREW,MACHINE HD NO 10-24UNC ................. .NUT,PLAIN,HEXAGON NO 10-24NC-2B.............. .LATCH,BASE....................................................... .NUT,PLAIN,WING 5/16-18 UNC-2B ..................... .SCREW,MACHINE 5/16-18UNC-3AX1IN LG........ .WASHER,FLAT.................................................... END OF FIGURE 13-1 1 1 2 2 2 2 2 2 2 2 2 2 4 2 4 1 4 4 4 26 4 12 6 6 6 1 2 2 2 TM 10-3530-205-24P Figure 14. Tray Assembly, Clothing, Darning and Button. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 07 TRAY ASSEMBLIES MACHINE HEAD FIG. 14 TRAY ASSEMBLY,CLOTHING, DARNING AND BUTTON 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 XDOFF XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOFF XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ 81337 81337 96906 96906 96906 81337 81337 81337 96906 81337 81337 96906 81337 81337 96906 81337 96906 81337 6-1-1695-28 61-1695-28-23 MS35190-292 MS35335-33 MS35690-401 6-1-1695-28-28 6-1-1695-28-29 6-1-1695-28-9 MS35495-94 6-1-1695-28-6 6-1-1695-28-11 MS35495-69 61-1695-30 6-1-1695-30-25 MS35495-115 61-1695-30-14 MS35494-84 6-1-1695-30-8 19 XDOZZ 81337 6-1-1695-30-9 20 21 22 23 24 25 26 27 28 29 30 31 32 XDOZZ XDOZZ XDOZZ XDOZF XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ 81337 81337 81337 81337 81337 81337 81337 96906 81337 81337 96906 96906 96906 6-1-1695-30-7 6-1-1695-30-6 6-1-1695-30-5 6-1-1110-29 6-1-1110-29-11 6-1-1110-29-10 6-1-1110-29-9 MS35494-34 6-1-1110-29-8 6-1-1110-29-23 MS35690-401 MS35190-292 MS35335-33 TRAY ASSY,CLOTHING SEWING MACHINE ....... .STOP................................................................... .SCREW,MACHINE .............................................. .WASHER,LOCK................................................... .NUT,PLAIN HEX .................................................. .WING NUT .......................................................... .STRAP,HOLD DOWN .......................................... .BUMPER,RECESS............................................... .SCREW,WOOD................................................... .ABSORBER,SHOCK,FELT................................... .HANDLE .............................................................. .SCREW,WOOD................................................... TRAY ASSY,DARNING SEWING MACHINE ......... .STOP................................................................... .SCREW,WOOD................................................... .SCREW,THUMB .................................................. .SCREW,WOOD .................................................. .STRAP ASSY,R.H. THIS BAR IS WELDED TO 6-1-1695-30-11 TO FORM ASSY .......................... .STRAP ASSY,L.H. THIS BAR IS WELDED TO 6-1-1695-30-11 TO FORM ASSY .......................... .ABSORBER,SHOCK,FELT................................... .ABSORBER,SHOCK,FELT................................... .SHOCK ABSORBER............................................ TRAY ASSY,BUTTON SEWING MACHINE ........... .SCREW,THUMB SHLDR...................................... .STRAP,R.H.......................................................... .STRAP,L.H. ......................................................... .SCREW,WOOD................................................... .SHOCK ABSORBER,FELT................................... .STOP................................................................... .NUT,PLAIN HEX .................................................. .SCREW,MACHINE .............................................. .WASHER,LOCK................................................... END OF FIGURE 14-1 1 1 2 2 2 2 1 4 4 1 1 2 1 1 2 1 8 1 1 1 1 1 1 1 1 1 6 3 1 2 2 2 TM 10-3530-205-24P Figure 15. Clothing Machine External Parts. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 08 LOCKSTITCH SEWING MACHINE HEAD FIG. 15 CLOTHING MACHINE EXTERNAL PARTS 1 PFFFF 11598 MODEL C765 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 XDFZZ XDFZZ XDFZZ XDFZZ PAFZZ XBFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ PAFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 C765-2 C765-1 C765-3 C765-4 C765-5 C765-6 C765-7 C765-8 C765-9 C765-10 C765-11 C765-12 C765-13 C765-14 C765-15 C765-14 C765-17 C765-18 C765-19 C765-20 C765-21 C765-22 C765-23 C765-24 C765-25 C765-26 C765-27 C765-28 C765-29 C765-30 C765-31 C765-32 C765-33 C765-34 C765-35 C765-38 C765-39 C765-40 C765-41 C76542 C765-43 C76544 C76545 SEWING,MACHINE,INDUSTRIAL SINGLE NEEDLE, LOCK STITCH INDUSTRIAL ................................. .SETSCREW......................................................... .PLATE,FACE ....................................................... .PLUG,RUBBER.................................................... .PLATE,SLIDE ...................................................... .PLATE,NEEDLE................................................... .SETSCREW,SIDE PLATE.................................... .SPRING,SIDE PLATE .......................................... .SCREW,NEEDLE PLATE..................................... .CAP,OIL .............................................................. .BED,MACHINE .................................................... .SETSCREW......................................................... .GUIDE,THREAD .................................................. .PLUG,RUBBER.................................................... .SETSCREW......................................................... .SETSCREW......................................................... .SETSCREW......................................................... .SETSCREW......................................................... .PLUG,RUBBER.................................................... .TOP COVER........................................................ .SCREW,SIDE PLATE .......................................... .PLATE,SIDE ........................................................ .NUT,GUIDE PIN .................................................. .PIN,GUIDE .......................................................... .DISC,TENSION.................................................... .SPRING,TENSION DISC ..................................... .SCREW,STUD..................................................... .CAP ..................................................................... .CAP,OIL .............................................................. .CAP,OIL .............................................................. .CAP,OIL .............................................................. .CAP,OIL .............................................................. .SETSCREW......................................................... .COVER,TAKE UP LEVER .................................... .NUT,THREAD EYELET ........................................ .EYELET,THREAD ................................................ .SETSCREW......................................................... .PLATE,ID............................................................. .SCREW,CLAMP .................................................. .FRAME,THREAD GUIDE ..................................... .SETSCREW,FRAME............................................ .SCREW,TENSION POST..................................... .SOCKET THREAD TENSION............................... .SPRING,TAKE UP ............................................... 15-1 Change 2 6 3 1 2 1 1 2 1 2 1 1 1 1 1 1 1 1 2 1 1 5 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 TM 10-3530-205-24P C03 SECTION II (1) ITEM NO 45 46 47 48 49 50 51 52 53 54 55 56 57 (2) SMR CODE XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PBFZZ PBOZZ (3) FSCM (4) PART NUMBER 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 81337 96906 C765-46 C765-47 C765-48 C765-49 C765-50 C765-51 C765-52 C765-53 C765-54 C765-55 C765-56 6-1-9494 MS35207-259 (5) DESCRIPTION AND USABLE ON CODES (UOC) .POST,THREAD TENSION ................................... .PIN,THREAD RELEASE- ..................................... .DISC, THREAD TENSION.................................... .PRESSER,TENSION............................................ .SPRING ............................................................... .NUT,TENSION..................................................... .SPRING ............................................................... .PIN,FEED REGULATOR ...................................... .ARM..................................................................... .GASKET,FACE PLATE ........................................ .GASKET,SIDE PLATE ......................................... .PLATE, PROTECTIVE ......................................... .SCREW (#10-32 UNF) ......................................... 15-2 (6) QTY 1 1 2 1 1 1 1 1 1 1 1 1 3 TM 10-3530-205-24P Figure 16. Lubrication System. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 08 LOCKSTITCH SEWING MACHINE HEAD 1 2 3 4 5 6 7 8 9 10 11 12 13 XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 C765-252 C765-253 C765-254 C765-262 C765-263 C765-264 C765-265 C765-266 C765-267 C765-268 C765-270 C765-271 C765-273 FIG. 16 LUBRICATION SYSTEM .COVER,OIL CAN ................................................. .GASKET .............................................................. .GAGE,OIL LEVEL................................................ .COVER ................................................................ .GASKET . ............................................................ .CONNECTOR ...................................................... .GAGE,OIL LEVEL................................................ .WICK,OIL ............................................................ .NIPPLE ................................................................ .TUBE,OIL ............................................................ .WICK ................................................................... .SETSCREW,COVER ........................................... .SETSCREW......................................................... END OF FIGURE 16-1 1 1 1 1 1 1 1 3 8 5 2 2 8 TM 10-3530-205-24P Figure 17. Tension and Feed Mechanism. TM 10-3530-205-24P Figure 18. Pulley, Shaft, and Needle Bar. TM 10-3530-205-24P SECTION II (1) ITEM NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 (2) SMR CODE XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ (3) FSCM 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 (4) PART NUMBER C765-170 C765-171 C765-172 C765-173 C765-174 C765-175 C765-176 C765-177 C765-178 C765-179 C765-180 C765-181 C765-182 C765-183 C765-184 C765-185 C765-186 C765-187 C765-188 C765-189 C765-190 C765-191 C765-192 C765-193 C765-194 C765-195 C765-196 C765-197 C765-198 C765-199 C765-200 C765-201 C765-202 C765-203 C765-204 C765-205 C765-206 C765-207 C765-208 C765-209 C765-210 C765-212 C765-213 C765-214 C765-215 C765-216 C765-217 C765-218 (5) DESCRIPTION AND USABLE ON CODES (UOC) GROUP 08 LOCKSTITCH SEWING MACHINE HEAD FIG. 17 TENSION AND FEED MECHANISM .SETESCREW,FEED DOG ................................... .DOG,FEED .......................................................... .BAR,FEED ........................................................... .NUT ..................................................................... .SCREW ............................................................... .NUT ..................................................................... .SCREW ............................................................... .SHAFT,FEED ROCK............................................ .CRANK ................................................................ .SCREW ............................................................... .BRACKET,TENSION SPRING.............................. .SETSCREW......................................................... .SPRING,TENSION............................................... .SETSCREW......................................................... .REGULATOR,FEED............................................. .SCREW,FEED REGULATE.................................. .BUSHING ............................................................ .RING,RUBBER .................................................... .FORK,CONNECTING .......................................... .SCREW,REGULATOR......................................... .DIAL,FEED REGULATOR .................................... .SCREW,DIAL....................................................... .PIN,HINGE .......................................................... .SCREW,TAPER HINGE ....................................... .LINK,FEEDER...................................................... .NUT ..................................................................... .SCREW,TAPER................................................... .NUT ..................................................................... .ROLLER .............................................................. .CRANK,REVERSE FEED..................................... .SCREW ............................................................... .STUD,HINGE ....................................................... .SCREW ............................................................... .CRANK,CONTROL LEVER .................................. .SHAFT................................................................. .WASHER............................................................. .SETSCREW......................................................... .LEVER................................................................. .RETAINER........................................................... .FELT,OIL . ........................................................... .SETSCREW......................................................... .ROD,CONNECTING ............................................ .SCREW,TAPER................................................... .NUT ..................................................................... .CRANK ................................................................ .BLOCK,SLIDE...................................................... .SCREW,CLAMP .................................................. .SHAFT................................................................. END OF FIGURE 17-1 (6) QTY 2 1 1 2 2 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 08 LOCKSTITCH SEWING MACHINE HEAD FIG. 18 PULLEY, SHAFT AND NEEDLE BAR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ PAFZZ XBFZZ PAOZZ PAOZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XDFZZ XBFZZ XDFZZ XDFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 C765-60 C765-61 C765-62 C765-63 C765-64 C765-65 C765-66 C765-67 C765-68 C765-69 C765-70 C765-71 C765-72 C765-73 C765-74 C765-75 C765-76 C765-77 C765-78 C765-79 C765-80 C765-81 C765-82 C765-83 C765-84 C765-85 C765-86 C765-87 C765-89 C765-90 C765-91 C765-92 C765-93 C765-94 C765-95 C765-96 C765-97 C765-98 C765-99 C765-100 C765-101 C765-102 C765-103 C765-104 C765-105 C765-106 .FELT,OIL ............................................................. .SETSCREW......................................................... .BUSHING,UPPER BAR........................................ .RETAINER,OIL WICK .......................................... .WICK,OIL ............................................................ .STUD,CONNECTING........................................... .SCREW,CLAMP .................................................. .SETSCREW......................................................... .BUSHING,LOWER............................................... .GUIDE,THREAD .................................................. .SETSCREW......................................................... .BAR,NEEDLE ...................................................... .CLAMP,NEEDLE.................................................. .NEEDLE,SEWING MACHINE............................... .SCREW,NEEDLE CLAMP.................................... .STUD,THREAD TAKE UP .................................... .LINK,THREAD TAKEUP....................................... .LEVER,THREAD TAKEUP ................................... .PIN,HINGE .......................................................... .SCREW,CAP ....................................................... .CRANK,NEEDLE BAR.......................................... .ROD,NEEDLE BAR.............................................. .BLOCK,BAR GUIDE............................................. .SETSCREW......................................................... .GUIDE,NEEDLE................................................... .SETSCREW......................................................... .COUNTERWEIGHT ............................................. .BUSHING UPPER SHAFT.................................... .SETSCREW......................................................... .SETSCREW......................................................... .BUSHING ............................................................ .COLLAR,THRUST................................................ .SLEEVE,FEED ECCENTRIC................................ .FELT,OIL ............................................................. .RETAINER,OIL FELT........................................... .SETSCREW......................................................... .ECCENTRIC FEED .............................................. .SETSCREW......................................................... .SETSCREW......................................................... .BUSHING,REAR UPPER ..................................... .PULLEY ............................................................... .SCREW,CAP ....................................................... .SETSCREW......................................................... .GEAR,UPPER SHAFT ......................................... .GEAR,VERT SHAFT UPPER ............................... .SETSCREW......................................................... 18-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 1 2 2 1 1 1 2 1 1 2 TM 10-3530-205-24P SECTION II (1) ITEM NO 47 48 49 50 51 52 53 54 55 56 57 (2) SMR CODE XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ (3) FSCM 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 (4) PART NUMBER C765-107 C765-109 C765-110 C765-111 C765-112 C765-113 C765-114 C765-115 C765-116 C765-117 C765-119 (5) DESCRIPTION AND USABLE ON CODES (UOC) .SHAFT,VERT....................................................... .BUSHING,VERT SHAFT ...................................... .BUSHING,VERT SHAFT ...................................... .COLLAR,THRUST................................................ .SETSCREW......................................................... .SETSCREW......................................................... .GEAR,LOWER VERT SHAFT .............................. .SETSCREW......................................................... .GEAR .................................................................. .SETSCREW......................................................... .SHAFT,UPPER .................................................... END OF FIGURE 18-2 (6) QTY 1 1 1 1 1 1 1 2 1 2 1 TM 10-3530-205-24P Figure 19. Presser Foot and Bobbin Mechanism. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 08 LOCKSTITCH SEWING MACHINE HEAD FIG. 19 PRESSER FOOT AND BOBBIN MECHANISM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 XBFZZ PAOZZ PAFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAOZZ PAOZZ XBFZZ PAOZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 C765-130 C765-131 C765-132 C765-133 C765-134 C765-135 C765-136 C765-137 C765-138 C765-139 C765-140 C765-141 C765-142 C765-143 C765-144 C765-145 C765-146 C765-147 C765-148 C765-149 C765-150 C765-151 C765-152 C765-153 C765-154 C765-155 C765-156 C765-157 C765-158 C765-159 C765-160 C765-161 C765-162 C765-164 C765-163 C765-165 C765-166 C765-167 .REGULATOR,THREAD........................................ .SCREW ............................................................... .REGULATOR,SPRING......................................... .SPRING ............................................................... .BAR,PRESSER.................................................... .BRACKET,PRESSER GUIDE............................... .SCREW ............................................................... .SCREW ............................................................... .BRACKET,LIFTING.............................................. .BUSHING,PRESS BAR........................................ .CUTTER,THREAD ............................................... .FOOT,PRESSER ................................................. .SETSCREW......................................................... .ROD,CONNECT,LIFT .......................................... .SCREW ............................................................... .JOINT,LIFTING LEVER........................................ .SWIVEL ............................................................... .SCREW,SWIVEL ................................................. .ROD,CONNECTING ............................................ .CRANK,KNEE LIFT.............................................. .SETSCREW......................................................... .BRACKET,BOBBIN CASE.................................... .SCREW ............................................................... .NUT ..................................................................... .LIFTER,PRESSER BAR ....................................... .PIN,PRESS BAR LIFT.......................................... .CASE,BOBBIN..................................................... .BOBBIN ............................................................... .HOOK ASSY,ROTARY......................................... .SETSCREW......................................................... .SETSCREW......................................................... .BUSHING,LOWER............................................... .SHAFT,LOWER ................................................... .SETSCREW......................................................... .COLLAR,THRUST................................................ .BUSHING,LWR SHAFT RR.................................. .SETSCREW......................................................... .CONNECTOR,PRESS BAR ................................. END OF FIGURE 19-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 TM 10-3530-205-24P Figure 20. Darning Machine Top Arm. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 09 DARNING SEWING MACHINE HEAD FIG. 20 DARNING MACHINE TOP ARM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 XDFFF XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ PAFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 678HD 543-1023 2DL1-4 2DL7-31 2DL4-25 2DL6-56 2DL2-33 543-1018 2DL6-49 2DL4-104 2DL4-101 2DL6-36 2DL5-28 2DL3-23 2DL5-111 2CT6-1035 2DL7-24 2DL6-121 2DL7-25 2DL2-176 2DL4-9 2DL6-26 2DL4-113 2DL5-171 2DL5-30 2BS6-169 2DL6-57 2DL5-29 2DL6-34 2DL6-49 2DL4-103 2DL6-35 2DL6-92 543-1006 2DL3-16 2DL6-58 543-1002 2DL1-5 MACHINE,DARNING............................................. .SCREW ............................................................... .PLATE,FACE ....................................................... .SPRING ............................................................... .ROD,SPRING ...................................................... .STUD,CRANK...................................................... .ROLL,PRESSER LIFTER ..................................... .SCREW ............................................................... .STUD,HAND LIFT ................................................ .LIFT,HAND .......................................................... .LIFTER,PRESSER ............................................... .STUD,PRESSER LIFTER..................................... .BUSHING,PRESSER BAR ................................... .BAR,PRESSER.................................................... .GUIDE,FACE PLATE ........................................... .SCREW,CLAMP .................................................. .FOOT,PRESSER ................................................. .SCREW ............................................................... .FOOT,PRESSER ................................................. .BAR,NEEDLE ...................................................... .LINK,NEEDLE BAR.............................................. .SCREW,SPRING ................................................. .LEVER,TAKEUP .................................................. .BUSHING,NEEDLE BAR...................................... .GUIDE,THREAD,NEEDLE.................................... .SCREW ............................................................... .SCREW ............................................................... .BUSHING ............................................................ .STUD,NEEDLE BAR ............................................ .STUD................................................................... .LEVER,TENSION................................................. .SCREW ............................................................... .SETSCREW......................................................... .SETSCREW......................................................... .FLYWHEEL ......................................................... .PIN,SPOOL ......................................................... .SCREW ............................................................... .COVER,SIDE ....................................................... END OF FIGURE 20-1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 TM 10-3530-205-24P Figure 21. Darning Machine Head Top Arm Shaft and Housing. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 09 DARNING SEWING MACHINE HEAD FIG. 21 DARNING MACHINE HEAD TOP ARM SHAFT AND HOUSING 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 543-1016 2DL6-186 2DL3-7 2DL6-55 2DL5-72 2DL5-11 543-1006 2DL5-192 543-1013 2DL3-52 2DL3-5 2DL6-93 2DL6-92 2DL3-51 2DL5-172 2DL5-61 2DL3-53 2DL5-62 2DL3-15 2DL6-20 2DL6-94 2DL6-92 2DL1-1 2DL8-6 2DL5-8 2DL4-10 543-1007 2DL4-32 2DL8-3 .SCREW ............................................................... .SCREW ............................................................... .CRANK ................................................................ .STUD,FULCRUM ................................................. .GUIDE,THREAD .................................................. .BEARING,HAND WHEEL..................................... .SETSCREW......................................................... .BUSHING,SHAFT ................................................ .SETSCREW......................................................... .GEAR,SHAFT TOP .............................................. .SHAFT,TOP......................................................... .SETSCREW......................................................... .SCREW ............................................................... .GEAR,SHAFT VERT ............................................ .COLLAR,HOOK SHAFT ....................................... .BUSHING ............................................................ .GEAR,SHAFT ...................................................... .BUSHING,SHAFT ................................................ .SHAFT................................................................. .PIN,RELEASE...................................................... .SCREW ............................................................... .SCREW ............................................................... .HOUSING,UPPER ............................................... .TAKE UP ASSY ................................................... ..YOKE,TAKE UP .................................................. ..FULCRUM,TAKE UP........................................... ..SETSCREW........................................................ ..ROD,TAKE UP.................................................... .TENSION ASSY................................................... END OF FIGURE 21-1 1 1 1 1 1 1 1 2 1 1 1 1 3 1 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 TM 10-3530-205-24P Figure 22. Darning Machine Middle and Bottom Base. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 09 DARNING SEWING MACHINE HEAD FIG. 22 DARNING MACHINE MIDDLE AND BOTTOM BASE 1 2 3 4 5 6 7 8 9 10 11 12 13 XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2DL6-87 2DL7-1 2DL6-91 543-1234 2BS6-4008 2DL1-2 543-1003 2DL6-62 2DL7-71 2DL6-71 2DL1-3 2DL8-7 2DL8-8 .SCREW ............................................................... .PLUG,OIL ............................................................ .SCREW ............................................................... .SCREW ............................................................... .PIN,DOWEL......................................................... .HOUSING,MIDDLE .............................................. .SCREW ............................................................... .PIN,HINGE .......................................................... .KNOB,BASE ........................................................ .SCREW,BASE ..................................................... .BASE ................................................................... .BLOCK ASSY,PRESSER ..................................... .GUIDE ASSY ....................................................... END OF FIGURE 22-1 1 1 1 3 1 1 2 1 1 1 1 1 1 TM 10-3530-205-24P Figure 23. Darning Machine Hook Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 09 DARNING SEWING MACHINE HEAD FIG. 23 DARNING MACHINE HOOK ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 XBFZZ XBFZZ XBFZZ PAOZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2DL5-195 2DL7-380 677-369 61056 677-780 2DL5-60 2DL5-700 2DL3-540 2DL-1720 2DL5-710 2DL3-6000 2DL6-92 .FINGER,POSITION.............................................. .SLEEVE............................................................... .CASE,BOBBIN..................................................... .BOBBIN ............................................................... .HOOK .................................................................. .YOKE,BUSHING .................................................. .BUSHING ............................................................ .GEAR .................................................................. .COLLAR .............................................................. .BUSHING ............................................................ .SHAFT,HEAD ...................................................... .SETSCREW......................................................... END OF FIGURE 23-1 1 1 1 1 1 1 1 1 2 1 1 2 TM 10-3530-205-24P Figure 24.. Button Machine Head Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 10 BUTTON SEWING MACHINE HEAD FIG. 24 BUTTON MACHINE HEAD ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 PAFFF XBFZZ XBFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZ XAFZ XAFZ XAFZZ XAFZZ XBFZZ XAFZZ XAFZZ. XAFZZ XAFZZ XAFZZ XBFZZ XAFZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XAFZZ XBFZZ XAFZZ XAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 600 543-1023 2-543-08-003 543-29 543-26 543-25 543-27 543-28 543-31 543-30H 543-32 543-34 543-33 543-40A 543-37 543-39 543-38 543-278 543-279 543-277 543-40 543-24 543-22 2-543-08-021 2BS6-144 2BS7-95 2BS7-96 2BS7-97 2BS6-95 2-543-08-020 2BS6-145 543-1008 2BS7-94 2BS7-93 2BS7-96 2BS7-97 2BS6-93 543-44 543-1002B 543-46 543-45 543-54 2BS6-97 543-57 543-58 2BS7-6000 HEAD ASSY,BUTTON .......................................... .SCREW ............................................................... .FACEPLATE ASSY .............................................. ..BUTTON,HAND RELEASE.................................. ..SCREW .............................................................. ..PLATE,STOP...................................................... ..STUD,THREAD CLAMP ...................................... ..BUSHING,THREAD CLAMP................................ ..PLUNGER........................................................... ..SPRING .............................................................. ..SPRING .............................................................. ..SCREW .............................................................. ..COLLAR ............................................................. ..PIN ..................................................................... ..GUIDE ................................................................ ..STUD,THREAD GUIDE ....................................... ..ROLLER ............................................................. ..HOLDER,TENSION DISC ................................... ..SPRING,TENSION DISC .................................... ..DISC,THREAD TENSION.................................... ..PIN,GUIDE ......................................................... ..EYE,P,ATE ......................................................... ..PLATE,FACE ...................................................... .TENSION ASSY,FRONT ...................................... ..NUT .................................................................... ..SPRING .............................................................. ..PLATE ................................................................ ..PLATE ................................................................ ..STUD.................................................................. .TENSION ASSY,REAR ........................................ ..NUT .................................................................... .SCREW ............................................................... ..SPRING .............................................................. ..WASHER............................................................ ..PLATE ................................................................ ..PLATE ................................................................ ..STUD.................................................................. ..PLUNGER........................................................... ..SCREW .............................................................. ..WASHER,RETAINER.......................................... ..CAP,PLUNGER................................................... .PIN ...................................................................... .PIN. ..................................................................... .SPRING ............................................................... .HOOK .................................................................. .PLATE ................................................................. 24-1 1 2 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 TM 10-3530-205-24P SECTION II (1) ITEM NO 47 48 49 50 (2) SMR CODE XBFZZ XBFZZ XBFZZ XBFZZ (3) FSCM 11598 11598 11598 11598 (4) PART NUMBER 543-55 543-56 543-41 543-60 (5) DESCRIPTION AND USABLE ON CODES (UOC) .LEVER................................................................. .STUD,PIVOT ....................................................... .PIN ...................................................................... .SHAFT................................................................. END OF FIGURE 24-2 (6) QTY 1 1 1 1 TM 10-3530-205-24P Figure 25. Needle Bar Drive Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 10 BUTTON SEWING MACHINE HEAD FIG. 25. NEEDLE BAR DRIVE ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2-543-08-001 543-64 543-68 543-66 543-2000 2BS6-85 543-10 543-76 543-1006 543-69 543-71 543-72 543-227 543-1007 543-70 543-138 2DL6-90 543-17 543-1010 2-543-08-002 2-543-08-007 543-128 543-1006 543-130 543-4001 543-21 543-124A 543-127A 543-4000 543-13A 543-12A 543-125A .ROCKER ARM ASSY........................................... ..CLAMP ............................................................... ..LINK ................................................................... ..SCREW .............................................................. ..NUT .................................................................... ..SCREW .............................................................. ..ARM,ROCKER .................................................... ..COLLAR,STUD ................................................... ..SETSCREW........................................................ ..STUD.................................................................. ..STUD,PIVOT ...................................................... ..NUT,CHECK ....................................................... ..SCREW .............................................................. ..SETSCREW........................................................ ..PLUNGER,PUSH ................................................ .BUSHING,NEEDLE BAR...................................... .SETSCREW......................................................... .BUSHING ............................................................ .SCREW ............................................................... .ROD ASSEMBLY ................................................. .SHAFT ASSY,MAIN ............................................. .JOURNAL ............................................................ .SETSCREW......................................................... .COLLAR .............................................................. .SETSCREW......................................................... .BEARING............................................................. ..SHAFT,MAIN ...................................................... ..COLLAR ............................................................. ..PIN ..................................................................... ..PULLEY HALF,SMALL ........................................ ..PULLEY HALF,LARGE........................................ ..HANDWHEEL ..................................................... END OF FIGURE 25-1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 TM 10-3530-205-24P Figure 26. Clamp Lift and Thread Slack Mechanism. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 10 BUTTON SEWING MACHINE HEAD FIG. 26 CLAMP LIFT AND THREAD SLACK MECHANISM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 XBFZZ XBFZZ XBFZZ XBFZZ XAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2-543-08-023 543-1007 543-195 543-194 543-18 2-543-08-005 543-2000 543-90 543-90A 543-82 543-86 543-85 543-88 543-87 543-1239 2-543-08-038 543-1000 543-196 2BS6-71 543-89A 2BS7-160 543-2000 543-224 543-86 543-75 543-220 543-2 STAND ASSY ....................................................... ..SETSCREW........................................................ ..HOOK,THREAD STAND ..................................... ..PIN,SPOOL ........................................................ ..STAND,THREAD................................................. .STRAP ASSY....................................................... ..NUT .................................................................... ..STUD.................................................................. ..STUD.................................................................. ..STRAP................................................................ ..STUD,PIVOT ...................................................... ..BRACKET,LIFT CLAMP ...................................... ..STUD,LEVER PIVOT .......................................... ..LEVER................................................................ .SCREW ............................................................... .KICKPIN .............................................................. .SCREW ............................................................... .COVER ................................................................ .SCREW ............................................................... .STRAP................................................................. .SPRING ............................................................... .NUT ..................................................................... .STUD................................................................... .STUD,PIVOT ....................................................... .STUD,PIVOT LEVER ........................................... .LEVER,PIVOT...................................................... .BASE ................................................................... END OF FIGURE 26-1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 TM 10-3530-205-24P Figure 27. Stopping Mechanism Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 10 BUTTON SEWING MACHINE HEAD FIG. 27 STOPPING MECHANISM ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2-543-08-017 552-312XA 600-332 600-332A 600-323 2-543-08-036 552-155 600-335 552-3002 600-309 600-308 2-543-08-026 .MECHANISM ASSY,STOP................................... ..NUT,LOCK.......................................................... ..BUMPER,RUBBER ............................................. ..WASHER,RUBBER............................................. ..ADAPTER,RUBBER............................................ ..FINGER ASSY .................................................... ..SPRING,FINGER ................................................ ..CAPSCREW ....................................................... ..WASHER,LOCK.................................................. ..STOP,GUIDE...................................................... ..HOLDER,SPRING............................................... .CLAMP ASSY FLANGE BUTTON ........................ END OF FIGURE 27-1 1 2 1 2 1 1 1 2 2 1 1 1 TM 10-3530-205-24P Figure 28. Stand Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 11 STAND ASSEMBLY, SEWING MACHINE FIG. 28 STAND ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 XDOZO XDOZZ XDOZZ XDOZZ PAOZZ PAOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ MFFZZ XDOZZ XDOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ XDOZZ 81337 81337 81337 81337 96906 96906 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 96906 96906 96906 96906 96906 96906 96906 96906 96906 81337 81337 6-1-6362 6-1-6362-5 6-1-6367 6-1-6391-2 MS35338-45 MS17828-5C 6-1-6362-1 6-1-6362-2 6-1-6362-3 6-1-6362-4 6-1-6362-6 6-6-6362-7 6-1-6362-8 6-1-6362-9 6-1-6362-10 6-1-6362-19 MS35751-43 MS27040-11 MS27183-11 MS35354-65 MS27153-13 MS35338-44 MS35425-72 MS35355-63 MS27040-12 6-1-362-33 6-1-6362-34 28 XDOZZ 81337 6-1-6362-35 STAND.................................................................. .RAIL -ASSY TOP ................................................. ..RAIL TOP ........................................................... ..STUD ASSY,5/16 ................................................ ..WASHER,LOCK.................................................. ..NUT,SELF-LOCKING,HEX SELF ........................ .LEG,LOWER LEFT .............................................. .LEG,LOWER RIGHT............................................ .LEG,INTERMEDIATE, LEFT ................................ .LEG,INTERMEDIATE, RIGHT .............................. .TREADLE,SUPPORT........................................... .LEG,CROSS BRACE ........................................... .BASE,WOOD MAKE FROM 1X3X19 WOOD,PIECE .CLIP,FOLDING .................................................... .RETAINER,BOLT................................................. .ROD,EXTENSION................................................ .BOLT,SQUARE NECK .312-18 UNC-2A X 11/2 L. .NUT,PLAIN,SQUARE .312-18 UNC-2B ................ .WASHER,FLAT.................................................... .BOLT,MACHINE,SQUARE, .375-16 UNC-2A X 11/4 .WASHER,FLAT.................................................... .WASHER,LOCK................................................... .NUT,PLAIN,WING................................................ .BOLT,MACHINE .375-16 UNC-2A X 3/4............... .NUT,PLAIN,SQUARE .312-18 UNC-2B ................ .ROD,PITMAN....................................................... .TREADLE USED WITH CLOTHING&DARNING SEWING MACHINE ASSY'S 6-1-6384, 6-1-6385... .TREADLE USED WITH BUTTON SEWING MACHINE ASSY 6-1-6388 .................................... END OF FIGURE 28-1 1 2 1 2 2 2 1 1 1 1 1 1 2 4 4 1 4 4 4 6 6 6 6 6 4 1 1 1 TM 10-3530-205-24P Figure 29. Pulley Assembly, Manual. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 11 STAND ASSEMBLY,SEWING MACHINE FIG. 29 PULLEY ASSEMBLY, MANUAL 1 2 3 4 5 6 7 8 XBOZZ XDOZZ XDOZZ XDOZZ XDOZZ XBOZZ XBOZZ XDOZZ 81337 81337 81337 81337 81337 96906 96906 96906 6-1-6362-36 6-1-6461-1 6-1-6463-1 6-1-6463-2 6-1-6463-3 MS15795-720 MS51975-44 MS51975-32 PULLEY ASSY...................................................... .PULLEY,BELT ..................................................... .BUSHING ............................................................ .SEGMENT ........................................................... .BUSHING ............................................................ .WASHER,FLAT.................................................... .SCREW,SHOULDER ........................................... .SCREW,SHOULDER ........................................... END OF FIGURE 29-1 1 1 1 1 1 1 1 1 TM 10-3530-205-24P Figure 30. Stand and Chair Holddown Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 12 HOLDDOWN ASSEMBLY, CHAIR AND STAND FIG. 30 STAND AND CHAIR HOLDDOWN ASSEMBLY 1 2 3 4 5 6 7 8 9 10 XBOZZ XBOZZ XBOZZ PAOZZ PAOZZ PAOZZ PAOZZ XBOFF XBOZZ XBOFF 81337 81337 81337 96906 96906 96906 96906 81337 81337 81337 6-1-1696-A 6-1-1696-10-2 6-1-1696-10-10 MS51939-3 MS35190-272 MS35649-202 MS35338-43 6-1-1106-4 6-1-1106-4-2 6-1-1106-4-5 STRAP ASSY........................................................ .CHAPE,BUCKLE HALF ........................................ .BILLET HALF ....................................................... .LOOP,STRAP FASTENER................................... .SCREW, MACHINE ............................................. .NUT,PLAIN,HEXAGON ........................................ .WASHER,LOCK................................................... .CHAIR HLD DWN ASSY ...................................... .STRAP,BUCKLE AND LOOP ............................... .STRAP,TIP AND LOOP........................................ END OF FIGURE 30-1 2 2 2 2 2 2 2 2 2 2 TM 10-3530-205-24P Figure 31. Track Assembly, Generator. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 13 TRACK ASSEMBLY, GENERATOR FIG. 31 TRACK ASSEMBLY, GENERATOR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 XBOZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBOZZ XBFZZ XDFZZ XDOZZ XBOZZ XBOZZ XBOZZ XBOZZ 81337 81337 81337 81337 81337 81337 96906 81337 81337 81337 96906 96906 96906 96906 6-1-1105-7 6-1-1105-7-1 6-1-1105-7-2 6-1-1105-7-3 6-1-1105-7-4 6-1-1105-7-5 MS3542-41 61-1105-7-7 6-1-1105-7-8 6-1-1105-7-9 MS35218-71 MS35333-40 MS16203-49 MS35218-59 15 16 17 18 19 20 21 XBOZZ XBOZZ XBFZZ XDFZZ XBOZZ XBOZZ XBOZZ 96906 96906 81337 96906 96906 96906 96906 MS35338-43 MS35649-202 6-1-1105-7-16 MS35914-115 MS35218-44 MS35338-42 MS35649-282 TRACK ASSY,GEN ............................................... .H BEAM 2X2X1/8,EXTRUDED ............................. .BAR,SQUARE,1/2................................................ .CHANNEL 2X2X1/4.............................................. .CLIP .................................................................... .KEEPER,BOLT .................................................... .NUT,WING,5/16-18 UNC-2B ................................ .RING .0915 DIA WIRE X 5/8 ID ........................... .CHAIN,MACHINE, STR LINK NO 5 X 6 IN LG ...... .ABSORBER,SHOCK 4X11/4X1/8 THK,FELT........ .SCREW,MACHINE SL 1/4-20 UNC-2A X 3/4 LG .. .WASHER,LOCK HELICAL,1/4 ............................. .NUT,PLAIN,HEXAGON 1/4-20 UNC 2B................ .SCREW,MACHINE,PAN HD SL 10-24 UNC2A X1IN .............................................................. .WASHER,LOCK HELICAL NO 10 ........................ .NUT,PLAIN,HEXAGON ........................................ .PAD 4X1X1/2 THK ............................................... .INSERT,SELF-TAPPING 7/16-1 IN UNC-3B......... .SCREW,MACHINE SL 8-32 UNC 2A X 3/4........... .WASHER,LOCK HELICAL NO 8 .......................... .NUT,PLAIN,HEXAGON ........................................ END OF FIGURE 31-1 1 2 2 2 2 4 4 4 6 2 36 36 36 12 12 12 3 4 4 4 4 TM 10-3530-205-24P Figure 32. Fire Extinguisher. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 14 FIRE EXTINGUISHER FIG. 32 FIRE EXTINGUISHER 1 PBOFF 81337 6-1-1109-3 EXTINGUISHER,FIRE,COMPLETE WITH BRACKET, OEE-910,TYPE I SIZE 5 ....................................... END OF FIGURE 32-1 1 TM 10-3530-205-24P Figure 33. Holddown Clamp Assembly. TM 10-3530-205-24P SECTION II (1) ITEM NO (2) SMR CODE (3) FSCM (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 15 CLAMP ASSEMBLY, HOLDDOWN FIG. 33 HOLDDOWN CLAMP ASSEMBLY 1 2 3 4 5 6 7 8 9 10 XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ XDOZZ 81337 96906 96906 96906 81337 96906 96906 96906 81337 81337 6-1-1108-3 MS35307-471 MS171530 MS35335-67 6-1-1108-3-2 MS35690-610 MS35333-76 MS51959-113 6-1-1108-3-3 6-1-1108-3-1 CLAMP ASSY,HOLD DOWN................................. .SCREW,CAP,HEX HD ......................................... .PIN,SPRING ........................................................ .WASHER,LOCK EXTERNAL TOOTH 5/8............. .CLAMP,ARM........................................................ .NUT,HEX,3/8 UNC-2B.......................................... .WASHER,LOCK INT TOOTH 3/8 ......................... .SCREW,MACHINE HD 3/8-16 UNC-2A ................ .PAD,CLAMP ........................................................ .PLATE,CLAMP..................................................... END OF FIGURE 33-1 6 1 1 1 1 4 4 4 1 1 TM 10-3530-205-24P Section III. SPECIAL TOOLS LIST (Not Applicable) TM 10-3530-205-24P C03 SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX STOCK NUMBER 5310-00-045-3296 5310-00-045-3299 5305-00-071-2071 3530-00-079-9914 3530-00-079-9915 5310-00-087-4652 5310-00-087-7493 5305-00-088-8332 5305-00-102-2966 4930-00-141-8703 5120-00-144-2100 5306-00-225-8499 5340-00-229-0340 3530-00-245-7957 6240-00-246-5052 5320-00-264-3183 5305-00-269-3213 5120-00-322-6188 5120-00-322-6189 5120-00-322-6190 5120-00-329-3297 5120-00-357-5594 5120-00-357-5596 5120-00-357-5597 5120-00-357-5752 3530-00-389-7393 3530-00-390-4540 5310-00-407-9566 5310-00-409-3701 5120-00-449-3745 3530-00-467-7002 7195-00-474-5859 5935-00-503-6688 5310-00-543-2009 5310-00-582-5965 5310-00-584-5272 4210-00-595-1777 3530-00-61 6-1612 7290-00-634-2010 5320-00-721-5211 5305-00-724-7222 FIG. 30 2 3 4 2 6 6 3 4 13 30 10 12 7 8 11 30 6 8 13 3 4 8 8 8 8 8 8 8 8 6 6 28 28 8 7 13 13 9 1 1 13 28 2 32 7 8 5 5 2 NATIONAL STOCK NUMBER INDEX ITEM 7 13 5 10 6 3. 4 9 5 29 5 2 8 4 19 9 4 5 5 21 7 3 11 10 9 18 15 20 22 17 10 7 5 6 14 3 1 2 4 8 9 18 22 8 1 1 7 3 5 9 5340-00-726-0615 5306-00-753-6996 5320-00-754-0962 5310-00-761-6882 5310-00-763-8920 5310-00-773-7618 5320-00-803-7118 5310-00-809-3078 5310-00-809-4058 5310-00-820-6653 5975-00-825-4462 5310-00-828-8189 5310-00-855-1102 5306-00-884-8786 5120-00-900-8324 5305-00-901-2103 6230-00-901-9755 5305-00-903-5535 5340-00-906-0639 5340-00-912-4088 5310-00-934-9757 5310-00-934-9758 5305-00-958-5248 5305-00-958-5253 5310-00-982-4947 5310-00-982-4949 5305-00-984-6191 5305-00-984-6192 5305-00-984-6216 5935-00-988-7828 5305-00-993-1849 5935-01-012-3080 3530-01-018-6386 5310-01-070-2105 3530-01-071-5396 5310-01-077-6817 6240-01-090-7262 6105-01-099-6821 6105-01-141-7726 I-1 FIG. 2 28 1 4 13 2 3 4 3 28 13 2 9 13 1 28 8 10 11 12 8 10 3 4 1 3 4 13 30 13 13 28 28 2 3 4 13 8 15 9 6 2 6 28 10 11 12 10 12 11 11 ITEM 15 17 5 8 19 10 8 4 12 19 23 11 5 27 10 24 12 8 2 12 3 7 2 9 6 4 12 25 6 17 28 25 18 12 3 11 24 2 57 7 2 7 8 23 15 6 7 10 14 1 12 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX STOCK NUMBER 5305-01-167-7730 3530-01-193-4754 3530-01-195-0679 3530-01-211-6853 3530-01-211-6854 3530-01-211-6855 3530-01-211-6856 3530-01-211-6857 5930-01-211-6858 6230-01-211-6859 3530-01-211-6860 5340-01-211-6912 5340-01-211-6913 5305-01-211-6915 3020-01-211-6918 5340-01-211-7136 3530-01-212-1224 3530-01-212-1225 3530-01-212-1226 3530-01-212-5588 3530-01-212-9539 3530-01-212-9540 3530-01-212-9609 3530-01-212-9610 3530-01-214-0143 3530-01-214-0144 3530-01-214-0145 3530-01-214-0146 5340-01-214-0147 5340-01-214-0148 3530-01-214-0149 3530-01-214-0150 3530-01-214-0151 3530-01-214-0152 3530-01-214-0153 3530-01-214-0154 3530-01-214-0155 3530-01-214-0156 3530-01-214-0157 3530-01-214-0158 3530-01-214-0160 3530-01-214-0161 FIG. 10 11 12 9 9 10 12 3 3 4 4 4 10 11 12 11 12 11 3 4 1 10 12 2 10 10 12 20 6 6 6 6 24 20 7 7 28 28 15 18 18 18 19 19 19 19 19 17 20 21 NATIONAL STOCK NUMBER INDEX ITEM 12 16 16 2 3 6 11 1 6 1 2 13 13 4 17 5 6 8 11 7 7 11 15 14 1 16 1 25 11 12 1 6 1 17 2 5 16 26 44 10 12 15 3 5 12 27 28 29 19 5 3530-01-214-0162 3530-01-214-0163 3530-01-214-0216 5340-01-214-0243 3530-01-214-0247 3530-01-214-8394 3530-01-215-4764 3530-01-216-2572 I-2 FIG. 21 23 20 1 18 15 10 11 12 8 ITEM 29 4 14 4 14 1 4 7 19 4 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM 58536 65051 81902 81902 81902 81902 81348 PART NUMBER 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 A-A-632 AE24578D-17 A4701177 A4701178 A4701179 A471195 CGG-S-00278 TYPE I,STYLE A,CLASS 2 C765-1 C765-10 C765-100 C765-101 C765-102 C765-103 C765-104 C765-1 05 C765-106 C765-107 C765-109 C765-11 C765-110 C765-111 C765-112 C765-113 C765-114 C765-115 C765-116 C765-117 C765-119 C765-12 C765-13 C765-130 C765-131 C765-132 C765-133 C765-134 C765-135 C765-136 C765-137 C765-138 C765-139 C765-14 11598 11598 11598 11598 11598 11598 11598 11598 C765-140 C765-141 C765-142 C765-143 C765-144 C765-145 C765-146 C765-147 PART NUMBER INDEX STOCK NUMBER 7290-00-634-2010 5120-00-900-8324 5120-00-322-6189 5120-00-322-6188 5120-00-449-3745 3530-01-214-0153 3530-01-214-0154 3530-01-214-0155 I-3 FIG. ITEM 8 8 8 8 8 8 7 7 8 12 10 11 14 6 15 15 18 18 18 18 18 18 18 18 18 15 18 18 18 18 18 18 18 18 18 15 15 19 19 19 19 19 19 19 19 19 19 15 15 19 19 19 19 19 19 19 19 3 11 40 41 42 43 44 45 46 47 48 12 49 50 51 52 53 54 55 56 57 13 14 1 2 3 4 5 6 7 8 9 10 15 17 11 12 13 14 15 16 17 18 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 PART NUMBER C765-148 C765-149 C765-15 C765-150 C765-151 C765-152 C765-153 C765-154 C765-155 C765-156 C765-157 C765-158 C765-159 C765-160 C765-161 C765-162 C765-163 C765-164 C765-165 C765-166 C765-167 C765-17 C765-170 C765-171 C765-172 C765-173 C765-174 C765-175 C765-176 C765-177 C765-178 C765-179 C765-18 C765-180 C765-181 C765-182 C765-183 C765-184 C765-185 C765-186 C765-187 C765-188 C765-189 C765-19 C765-190 C765-191 C765-192 C765-193 C765-194 C765-195 C765-196 PART NUMBER INDEX STOCK NUMBER 3530-01-214-0156 3530-01-214-0157 I-4 FIG. 19 19 15 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 15 17 17 17 17 17 17 17 17 17 17 15 17 17 17 17 17 17 17 17 17 17 15 17 17 17 17 17 17 17 ITEM 19 20 16 21 22 23 24 25 26 27 28 29 30 31 32 33 35 34 36 37 38 18 1 2 3 4 5 6 7 8' 9 10 19 11 12 13 14 15 16 17 18 19 20 20 21 22 23 24 25 26 27 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 PART NUMBER C765-197 C765-198 C765-199 C765-2 C765-20 C765-200 C765-201 C765-202 C765-203 C765-204 C765-205 C765-206 C765-207 C765-208 C765-209 C765-21 C765-210 C765-212 C765-213 C765-214 C765-215 C765-216 C765-217 C765-218 C765-22 C765-23 C765-24 C765-25 C765-252 C765-253 C765-254 C765-26 C765-262 C765-263 C765-264 C765-265 C765-266 C765-267 C765-268 C765-27 C765-270 C765-271 C765-273 C765-28 C765-29 C765-3 C765-30 C765-31 C765-32 C765-33 C765-34 PART NUMBER INDEX STOCK NUMBER 3530-01-214-0158 I-5 FIG. 17 17 17 15 15 17 17 17 17 17 17 17 17 17 17 15 17 17 17 17 17 17 17 17 15 15 15 15 16 16 16 15 16 16 16 16 16 16 16 15 16 16 16 15 15 15 15 15 15 15 15 ITEM 28 29 30 2 21 31 32 33 34 _35 36 37 38 39 40 22 41 42 43 44 45 46 47 48 23 24 25 26 1 2 3 27 4 5 6 7 8 9 10 28 11 12 13 29 30 4 31 32 33 34 35 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 PART NUMBER C765-35 C765-38 C765-39 C765-4 C765-40 C765-41 C765-42 C765-43 C765-44 C765-45 C765-46 C765-47 C765-48 C765-49 C765-5 C765-50 C765-51 C765-52 C765-53 C765-54 C765-55 C765-56 C765-6 C765-60 C765-61 C765-62 C765-63 C765-64 C765-65 C765-66 C765-67 C765-68 C765-69 C765-7 C765-70 C765-71 C765-72 C765-73 C765-74 C765-75 C765-76 C765-77 C765-78 C765-79 C765-8 C765-80 C765-81 C765-82 C765-83 C765-84 C765-85 PART NUMBER INDEX STOCK NUMBER 3530-01-214-0149 3530-01-214-0150 3530-01-214-0151 3530-01-214-0247 3530-01-214-0152 I-6 FIG. 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18 15 18 18 18 18 18 18 18 18 18 18 15 18 18 18 18 18 18 ITEM 36 37 38 5 39 40 41 42 43 44 45 46 47 48 6 49 50 51 52 53 54 55 7 1 2 3 4 5 6 7' 8 9 10 8 11 12 13 14 15 16 17 18 19 20 9 21 22 23 24 25 26 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 81348 81348 81349 PART NUMBER PART NUMBER INDEX STOCK NUMBER 11598 96906 96906 96906 C765-86 C765-87 C765-89 C765-9 C765-90 C765-91 C765-92 C765-93 C765-94 C765-95 C765-96 C765-97 C765-98 C765-99 GGG0591 KRB211,TYPE I MIL-W-5086/1B M5 086/1-10-9 MODEL C765 MS15795-710 MS15795-720 MS15795-814 96906 96906 96906 96906 96906 MS16203-49 MS171530 MS17828-5C MS20426B7-7 MS20470-A4-6 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 MS20470-A4-7 MS20470-A4-7 MS20470-A4-9 MS20613-8C8 MS21313-162 MS27040-11 MS27040-12 MS27153-13 MS27183-10 MS27183-11 MS27183-13 96906 96906 96906 MS34494-95 MS35190-272 MS35190-292 5305-00-088-8332 96906 96906 96906 96906 MS35190-293 MS35190-306 MS35206-243 MS35206-244 5305-00-958-5248 5305-00-958-5253 5305-00-984-6191 5305-00-984-6192 96906 MS35206-269 5305-00-984-6216 4930-00-141-8703 3530-01-214-8394 5310-00-543-2009 5310-00-773-7618 5310-00-409-3701 5320-00-721-5211 5320-00-754-0962 5320-00-754-0962 5320-00-803-7118 5320-00-264-3183 5340-00-912-4088 5310-00-982-4949 5310-00-982-4947 5310-00-809-4058 5310-00-809-3078 5310-00-087-7493 I-7 FIG. ITEM 18 18 18 15 18 18 18 18 18 18 18 18 18 18 7 6 8 27 28 29 10 30 31 32 33 34 35 36 37 38 39 4 14 6 15 1 29 3 4 31 33 28 5 5 5 4 1 3 13 1 28 28 28 13 28 11 13 12 30 14 14 13 13 2 3 4 13 1 8 6 8 4 13 3 6 7 3 5 8 5 12 21 6 18 25 21 23 19 11 29 10 5 3 31 17 28 12 3 11 24 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER PART NUMBER INDEX STOCK NUMBER 96906 96906 96906 96906 96906 96906 96906 96906 MS35207-259 MS35218-44 MS35218-59 MS35218-71 MS35307-471 MS35333-40 MS35333-76 MS35335-33 5305-00-993-1849 96906 96906 MS35335-67 MS35338-42 5310-00-045-3299 96906 MS35338-43 5310-00-045-3296 96906 MS35338-44 5310-00-582-5965 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 MS35338-45 MS35338-46 MS35338-48 MS35338-50 MS35354-65 MS35355-63 MS35542-41 MS355425-41 MS355425-72 MS355493-226 5310-00-407-9566 96906 96906 MS35493-77 MS35494-100 5305-00-903-5535 96906 96906 96906 MS35494-34 MS35494-84 MS35494-85 5305-00-102-2966 96906 96906 MS35495-115 MS35495-124 5305-01-167-7730 96906 96906 96906 96906 MS35495-69 MS35495-79 MS35495-94 MS35649-282 5310-00-934-9757 96906 MS35649-202 5310-00-934-9758 96906 96906 MS35649-2255 MS35649-282 5310-00-855-1102 5310-00-584-5272 5310-00-820-6653 5306-00-884-8786 5310-00-828-8189 5310-01-077-6817 5305-00-901-2103 I-8 FIG. 15 31 31 31 33 31 33 14 14 33 2 3 4 31 30 31 1 13 28 28 11 2 2 28 28 31 13 28 10 11 12 10 11 12 14 14 10 12 14 10 11 12 14 13 14 3 4 13 30 31 1 31 ITEM 57 19 14 11 2 12 7 4 32 4 13 5 10 20 7 15 9 18 22 5 10 8 11 20 24 7 27 23 8 2 12 7 15 2 27 17 2 8 15 12 16 16 12 20 9 4 12 25 6 16 10 21 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER PART NUMBER INDEX STOCK NUMBER 96906 MS35690-401 96906 96906 96906 96906 96906 MS35690-610 MS35751-43 MS35791-22 MS35914-115 MS51922-17 96906 96906 96906 96906 96906 96906 96906 96906 96906 MS51939-3 MS51959-113 MS51967-14 MS51967-2 MS51967-20 MS51975-32 MS51975-44 MS90725-34 MS90725-62 5340-00-229-0340 96906 96906 83058 81349 81348 19204 MS90728-115 MS90728-164 M369 PARA 3.4.6 OF ML C-40153J WC596/12-4 11020947-14 5305-00-071-2071 5305-00-724-7222 77948 77948 11598 61864 61864 61864 77948 77948 77948 08807 135X1-18 135Xl-20 135X1X20 1486 1580 1587 16X175-18 16X257-16 16X257-18 17R20 3530-00-245-7957 3530-01-212-9610 3530-01-018-6386 5120-00-329-3297 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2-543-08-001 2-543-08-002 2-543-08-003 2-543-08-005 2-543-08-007 2-543-08-017 2-543-08-020 2-543-08-021 2-543-08-023 2-543-08-026 2-543-08-03 2-543-08-036 5306-00-753-6996 5310-00-087-4652 5310-01-070-2105 5310-00-761-6882 5310-00-763-8920 5306-00-225-8499 5305-00-269-3213 5935-01-012-3080 3530-01-215-4764 5120-00-144-2100 3530-01-212-9609 3530-00-079-9914 3530-00-079-9915 6240-01-090-7262 3530-01-214-0145 I-9 FIG. 14 14 33 28 5 31 3 4 30 33 2 13 2 29 29 11 3 4 2 2 8 6 9 10 11 12 6 6 6 8 8 8 6 6 6 10 11 12 25 25 24 26 25 27 24 24 26 27 7 27 ITEM 5 30 6 17 6 18 9 5 4 8 7 19 10 8 7 9 7 3 6 9 13 13 7 4 7 19 5 6 2 18 21 19 1 3 4 15 6 7 1 20 3 6 21 1 30 24 1 12 2 6 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598. 11598 11598 11598 11598 11598 11598 11598 2-543-08-038 2-552-08-01 2BS6-144 2BS6-145 2BS6-169 2BS6-4008 2BS6-71 2BS6-85 2BS6-93 2BS6-95 2BS6-97 2BS7-160 2BS7-6000 2BS7-93 2BS7-94 2BS7-95 2BS7-96 11598 2BS7-97 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2CT6-1035 2DL-1720 2DL1-1 2DL1-2 2DL1-3 2DL1-4 2DL1-5 2DL2-176 2DL2-33 2DL2-77 2DL3-15 2DL3-16 2DL3-23 2DL3-5 2DL3-51 2DL3-52 2DL3-53 2DL3-540 2DL3-6000 2DL3-7 2DL4-10 2DL4-101 2DL4-103 2DL4-104 2DL4-113 2DL4-25 2DL4-32 2DL4-9 2DL5-11 2DL5-111 2DL5-171 PART NUMBER INDEX STOCK NUMBER 3530-01-214-0146 3530-01-071-5396 3530-01-214-0216 I-10 FIG. 26 7 24 24 20 22 26 25 24 24 24 26 24 24 24 24 24 24 24 24 20 23 21 22 22 20 20 20 20 6 21 20 20 21 21 21 21 23 23 21 21 20 20 20 20 20 21 20 21 20 20 ITEM 16 5 25 31 26 5 19 6 37 29 43 21 46 34 33 26 27 35 28 36 16 9 23 6 11 3 38 20 7 8 19 35 14 11 14 10 17 8 11 3 26 11 31 10 23 5 28 21 6 15 24 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2DL5-172 2DL5-192 2DL5-195 2DL5-28 2DL5-29 2DL5-30 2DL5-60 2DL5-61 2DL5-62 2DL5-700 2DL5-710 2DL5-72 2DL5-8 2DL6-121 2DL6-186 2DL6-20 2DL6-26 2DL6-34 2DL6-35 2DL6-36 2DL6-49 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 2DL6-55 2DL6-56 2DL6-57 2DL6-58 2DL6-62 2DL6-71 2DL6-87 2DL6-90 2DL6-91 2DL6-92 11598 11598 11598 11598 11598 11598 11598 11598 11598 98255 11598 11598 11598 77948 2DL6-93 2DL6-94 2DL7-1 2DL7-24 2DL7-25 2DL7-31 2DL7-380 2DL7-71 2DL8-3 2DL8-5 2DL8-6 2DL8-7 2DL8-8 2231602-01 77948 225381 PART NUMBER INDEX STOCK NUMBER 3530-01-212-5588 3530-01-214-0161 3530-01-214-0144 3530-01-214-0160 3530-01-214-0162 6105-01-099-6821 3530-00-467-7002 I-11 FIG. 21 21 23 20 20 20 23 21 21 23 23 21 21 20 21 21 20 20 20 20 20 20 21 20 20 20 22 22 22 25 22 20 21 21 23 21 21 22 20 20 20 23 22 21 6 21 22 22 10 12 7 ITEM 15 8 1 13 28 25 6 16 18 7 10 5 25 18 2 20 22 29 32 12 9 30 4 6 27 36 8 10 1 17 3 33 13 22 12 12 21 2 17 19 4 2 9 29 9 24 12 13 10 14 3 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER 77948 77948 77948 21305 19207 77948 11598 11598 11598 11598 11598 11598 225453-30 40264 4031602-04 505656 51201000141 52237 543-10 543-1000 543-1002 543-1002B 543-1003 543-1006 11598 543-1007 11598 11598 11598 11598 11598 11598 543-1008 543-1010 543-1013 543-1016 543-1018 543-1023 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 543-12A 543-1234 543-1239 543-124A 543-125A 543-127A 543-128 543-13A 543-130 543-133 543-138 543-17 543-18 543-194 543-195 543-196 543-2 543-2000 11598 11598 11598 11598 11598 11598 543-21 543-22 543-220 543-224 543-226 543-227 PART NUMBER INDEX STOCK NUMBER 3530-01-195-0679 3530-00-390-4540 6105-01-141-7726 3530-00-616-1612 5120-00-322-6190 3530-00-389-7393 3530-01-212-9539 3530-01-212-9540 I-12 FIG. 12 6 11 7 8 6 25 26 20 24 22 20 21 25 25 21 25 26 24 25 21 21 20 20 24 25 22 26 25 25 25 25 25 25 6 25 25 26 26 26 26 26 25 26 26 25 24 26 26 6 25 ITEM 11 7 12 1 9 10 7 17 37 39 7 34 7 9 23 27 14 2 32 19 9 1 8 2 2 31 4 15 27 32 28 22 30 24 11 16 18 5 4 3 18 27 5 7 22 26 23 26 23 12 13 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 543-24 543-25 543-26 543-27 543-277 543-278 543-279 543-28 543-29 543-30H 543-31 543-32 543-33 543-34 543-37 543-38 543-39 543-40 543-40A 543-4000 543-4001 543-41 543-44 543-45 543-46 543-54 543-55 543-56 543-57 543-58 543-60 543-64 543-66 543-68 543-69 543-70 543-71 543-72 543-75 543-76 543-82 543-85 543-86 11598 11598 11598 11598 11598 11598 11598 543-87 543-88 543-89A 543-90 543-90A 552-155 552-3002 PART NUMBER INDEX STOCK NUMBER FIG. 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 25 25 24 24 24 24 24 24 24 24 24 24 25 25 25 25 25 25 25 26 25 26 26 26 26 26 26 26 26 26 27 27 I-13 ITEM 22 6 5 7 20 18 19 8 4 10 9 11 13 12 15 17 16 '21 14 29 25 49 38 41 40 42 47 48 44 45 50 2 4 3 10 15 11 12 25 8 10 12 11 24 14 13 20 8 9 7 9 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER PART NUMBER INDEX STOCK NUMBER 11598 81337 81337 81337 81337 81337 81337 81337 552-312XA 6-1-1100 6-1-1101 6-1-1103 6-1-1103-2-23 6-1-1103-2-24 6-1-1103-2-25 6-1-1103-2-27 81337 6-1-1103-2-32 5340-00-906-0639 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 6-1-1103-2-34 6-1-1103-2-36 6-1-1103-2-62 6-1-1103-2-67 6-1-1103-2-68 6-1-1103-2-78 6-1-1105-7 6-1-1105-7-1 6-1-1105-7-16 6-1-1105-7-2 6-1-1105-7-3 6-1-1105-7-4 6-1-1105-7-5 6-1-1105-7-7 6-1-1105-7-8 6-1-1105-7-9 6-1-1106-4 6-1-1106-4-2 6-1-1106-4-5 6-1-1108-3 6-1-1108-3-1 6-1-1108-3-2 6-1-1108-3-3 6-1-1108-6 6-1-1108-6-1 6-1-1108-6-12 6-1-1108-6-15 6-1-1108-6-2 6-1-1108-6-3 6-1-1108-6-4 6-1-1108-6-5 6-1-1109-3 6-1-1110-29 6-1-1110-29-10 6-1-1110-29-11 6-1-1110-29-23 6-1-1110-29-8 6-1-1110-29-9 6-1-1111-16 THRU 21 3530-01-211-6856 3530-01-211-6854 5340-01-211-6913 5340-01-211-6912 5340-01-214-0243 5305-01-211-6915 3530-01-211-6855 3530-01-211-6857 3530-01-211-6853 5340-01-211-7136 5340-00-726-0615 4210-00-595-1777 I-14 FIG. 27 1 1 1 4 4 3 3 4 3 4 4 3 4 3 1 1 31 31 31 31 31 31 31 31 31 31 30 30 30 33 33 33 33 2 2 2 2 2 2 2 2 32 14 14 14 14 14 14 8 ITEM 2 1 2 3 1 13 1 10 6 2 9 2 6 7 11 4 7 1 2 17 3 4 5 6 8 9 10 8 910 1 10 5 9 1 2 16 14 3 4 5 15 1 23 25 24 29 28 26 1 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER 81337 6-1-1111-27 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 6-1-1111-27-10 6-1-1111-27-11 6-1-1111-27-12 6-1-1111-27-16 6-1-1111-27-18 6-1-1111-27-2 6-1-1111-27-20 6-1-1111-27-21 6-1-1111-27-22 6-1-1111-27-3 6-1-1111-27-4 6-1-1111-27-5 6-1-1111-27-6 6-1-1111-27-9 6-1-1116-31 6-1-1116-31-5 6-1-1116-31-6 6-1-1117 6-1-1117-23 6-1-1117-23-1 6-1-1117-23-10 6-1-1117-23-11 6-1-1117-23-12 6-1-1117-23-13 6-1-1117-23-2 6-1-1117-23-21 6-1-1117-23-25 6-1-1117-23-3 6-1-1117-23-4 6-1-1117-23-5 6-1-1117-23-6 6-1-1117-23-7 6-1-1117-23-8 6-1-1117-23-9 6-1-1117-23-29 6-1-1695-28 6-1-1695-28-11 6-1-1695-28-23 6-1-1695-28-28 6-1-1695-28-29 6-1-1695-28-6 6-1-1695-28-9 6-1-1695-30 6-1-1695-30-14 6-1-1695-30-25 6-1-1695-30-5 6-1-1695-30-6 6-1-1695-30-7 6-1-1695-30-8 PART NUMBER INDEX STOCK NUMBER 5935-01-N79-2820 5935-00-988.-7828 3530-01-216-2572 5975-00-825-4462 6230-00-901-9755 6240-00-246-5052 5935-00-503-6668 3530-01-193-4754 7195-00-474-5859 7195-00-474-5859 I-15 FIG. 9 9 9 9 9 8 8 9 8 8 9 9 9 9 9 9 5 5 5 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 14 14 14 14 14 14 ITEM 1 8 3 11 12 2 4 5 3 5 13 9 10 4 6 2 1 4 2 1 2 3 13 14 15 16 4 22 26 5 6 7 8 9 11 12 10 1 11 2 6 7 10 8 13 16 14 22 21 20 18 TM 10-3530-205-24P SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM PART NUMBER 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 6-1-1695-30-9 6-1-1696-A 6-1-1696-10-10 6-1-1696-10-2 6-1-6362 61-6362-1 6-1-6362-10 6-1-6362-19 6-1-6362-2 6-1-6362-3 6-1-6362-33 6-1-6362-34 6-1-6362-35 6-1-6362-36 6-1-6362-4 6-1-6362-5 6-1-6362-6 6-1-6362-8 6-1-6362-9 6-1-6367 6-1-6383 6-1-6383-1 6-1-6383-11 6-1-6383-20 6-1-6383-6 6-1-6383-7 6-1-6383-8 6-1-6383-9 6-1-6386 6-1-6386-4 81337 81337 81337 81337 81337 77948 81337 6-1-6386-8 6-1-6386-9 6-1-6387-1 6-1-6389 6-1-6389-1 6-1-6389-10 6-1-6389-23 81337 6-1-6389-4 81337 6-1-6389-8 81337 81337 81337 6-1-6389-9 6-1-6391-2 6-1-6394-7 81337 81337 6-1-6399-10 6-1-6399-11 PART NUMBER INDEX STOCK NUMBER 5340-01-214-0147 5340-01-214-0148 3530-01-212-1226 3530-01-212-1224 3020-01-211-6918 3530-01-195-0679 3530-01-212-1225 6105-01-141-7726 3530-01-211-6860 6230-01-211-6859 5930-01-211-6858 I-16 FIG. 14 30 30 30 28 28 28 28 28 28 28 28 28 29 28 28 28 28 28 28 12 12 12 12 12 12 12 12 10 10 12 10 10 10 11 11 11 11 12 10 11 12 10 11 12 11 28 10 12 5 5 ITEM 19 1 3 2 1 7 15 16 8 9 26 27 28 1 10 2 11 13 14 3 1 20 9 13 3 4 22 5 1 11 15 6 3 16 1 8 13 5 6 5 14 18 13 4 17 17 4 17 21 14 15 TM 10-3530-205-24P C03 SECTION IV NATIONAL STOCK NUMBER AND PART NUMBER INDEX FSCM 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 81337 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 11598 81337 83058 83058 61864 61864 61864 PART NUMBER 6-1-6399-2 6-1-6399-3 6-1-6399-4 6-1-6399-5 6-1-6399-6 6-1-6399-7 6-1-6399-8 6-1-6399-9 6-1-6461-1 6-1-6463-1 6-1-6463-2. 6-1-6463-3 6-1-9494 6-1-9744 6-6-6362-7 600 600-308 600-309 600-323 600-332 600-332A 600-335 61056 677-369 677-780 678HD 81337 9219R 9323 9447 9470 9471 PART NUMBER INDEX STOCK NUMBER 5340-00-906-0639 3530-01-214-0143 3530-01-214-0163 5120-00-357-5596 5120-00-357-5597 5120-00-357-5594 5120-00-357-5752 I-17/(I-18 blank) FIG. 10 11 5 5 5 5 5 5 29 29 29 29 15 3 28 24 27 27 27 27 27 27 23 23 23 20 10 8 8 8 8 8 ITEM 9 3 8 9 10 11 12 13 2 3 4 5 56 2 12 1 11 10 5 3 4 8 4 3 5 1 14 20 16 22 15 17 TM 10-3530-205-24P By Order of the Secretary of the Army: Official: JOHN A. WICKHAM, JR. General, United States Army Chief of Staff MILDRED E. HEDBERG Brigadier General, United states Army The Adjutant General DISTRIBUTION: To be distributed in accordance with DA Form 12-25A? Organizational, and Direct Support and General Support Maintenance Requirements for Clothing Repair Shop, Trailer Mounted, Model CRS. * U.S. GOVERFMENT PRINTING OFFICE: 1986-652-126/20095 The Metric System and Equivalents Linear Measure Liquid Measure 1 centiliter = 10 milliters = .34 fl. ounce 1 deciliter = 10 centiliters = 3.38 fl. ounces 1 liter = 10 deciliters = 33.81 fl. ounces 1 dekaliter = 10 liters = 2.64 gallons 1 hectoliter = 10 dekaliters = 26.42 gallons 1 kiloliter = 10 hectoliters = 264.18 gallons 1 centimeter = 10 millimeters = .39 inch 1 decimeter = 10 centimeters = 3.94 inches 1 meter = 10 decimeters = 39.37 inches 1 dekameter = 10 meters = 32.8 feet 1 hectometer = 10 dekameters = 328.08 feet 1 kilometer = 10 hectometers = 3,280.8 feet Square Measure Weights 1 sq. centimeter = 100 sq. millimeters = .155 sq. inch 1 sq. decimeter = 100 sq. centimeters = 15.5 sq. inches 1 sq. meter (centare) = 100 sq. decimeters = 10.76 sq. feet 1 sq. dekameter (are) = 100 sq. meters = 1,076.4 sq. feet 1 sq. hectometer (hectare) = 100 sq. dekameters = 2.47 1 centigram = 10 milligrams = .15 grain 1 decigram = 10 centigrams = 1.54 grains 1 gram = 10 decigram = .035 ounce 1 decagram = 10 grams = .35 ounce acres 1 hectogram = 10 decagrams = 3.52 ounces 1 kilogram = 10 hectograms = 2.2 pounds 1 quintal = 100 kilograms = 220.46 pounds 1 metric ton = 10 quintals = 1.1 short tons 1 sq. kilometer = 100 sq. hectometers = .386 sq. mile Cubic Measure 1 cu. centimeter = 1000 cu. millimeters = .06 cu. inch 1 cu. decimeter = 1000 cu. centimeters = 61.02 cu. inches 1 cu. meter = 1000 cu. decimeters = 35.31 cu. feet Approximate Conversion Factors To change inches feet yards miles square inches square feet square yards square miles acres cubic feet cubic yards fluid ounces pints quarts gallons ounces pounds short tons pound-feet pound-inches To Multiply by centimeters 2.540 meters .305 meters .914 kilometers 1.609 square centimeters 6.451 square meters .093 square meters .836 square kilometers 2.590 square hectometers .405 cubic meters .028 cubic meters .765 milliliters 29,573 liters .473 liters .946 liters 3.785 grams 28.349 kilograms .454 metric tons .907 Newton-meters 1.356 Newton-meters .11296 To change ounce-inches centimeters meters meters kilometers square centimeters square meters square meters square kilometers square hectometers cubic meters cubic meters milliliters liters liters liters grams kilograms metric tons To Newton-meters inches feet yards miles square inches square feet square yards square miles acres cubic feet cubic yards fluid ounces pints quarts gallons ounces pounds short tons Temperature (Exact) °F Fahrenheit temperature 5/9 (after subtracting 32) Celsius °C temperature Multiply by .007062 .394 3.280 1.094 .621 .155 10.764 1.196 .386 2.471 35.315 1.308 .034 2.113 1.057 .264 .035 2.205 1.102 PIN: 059492-000 This fine document... Was brought to you by me: Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap “watermarks” and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: Free Military and Government Manuals – Sincerely Igor Chudov http://igor.chudov.com/ – Chicago Machinery Movers

Tm-10-3530-205-24p

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.