Transcript
TM 10-4320-315-24P TECHNICAL MANUAL
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
FOR
PUMPING ASSEMBLY, WATER 600 GPM, TRAILER MOUNTED NSN 4320-01-314-8844 MODEL 6X6 SP6
Distribution Statement A: Approved for public release; distribution is unlimited.
HEADQUARTERS, DEPARTMENT OF THE ARMY 29 APRIL 1994
TM 10-4320-315-24P C1 CHANGE
HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D.C., 30 September 1996
NO. 1
Unit, Direct Support and General Support Maintenance Repair Parts and Special Tools List
PUMPING ASSEMBLY, WATER 600 GPM, TRAILER MOUNTED NSN 4320-01-314-8844 MODEL 6X6 SP6
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. TM 10-4320-315-24P, 29 April 1994, is changed as follows: 1.
Remove and insert pages as indicated below. New or changed text material is indicated by a vertical bar in the margin. An illustration change is indicated by a miniature pointing hand. Remove pages i and ii 13-1 and Figure 14 14-1 and Figure 15 I-17 and I-18 I-27 and I-28
2.
Retain this sheet in front of manual for reference purposes.
Insert pages i and ii 13-1 and Figure 14 14-1 and Figure 15 I-17 and I-18 I-27 and I-28
TM 10-4320-315-24P C1 By Order of the Secretary of the Army:
Official:
DENNIS J. REIMER General, United States Army Chief of Staff
JOEL B. HUDSON Administrative Assistant to the Secretary of the Army 02619
DISTRIBUTION: To be distributed in accordance with DA Form 12-25-E, block no. 5288, requirements for TM 10-4320-315-24P.
TM 10-4320-315-24P C1 TECHNICAL MANUAL
HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D.C., 29 April 1994
NO. 10-4320-315-24P TECHNICAL MANUAL
Unit, Direct Support and General Support Maintenance Repair Parts and Special Tools List PUMPING ASSEMBLY, WATER 600 GPM, TRAILER MOUNTED NSN 4320-01-314-8844 MODEL 6X6 SP6 Current as of 15 April 1994
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this manual. If you find any mistakes, or if you know of a way to improve these procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to Publications and Blank Forms), or DA Form 2028-2 located in the back of this manual directly to: Commander, US Army Aviation and Troop Command, ATTN: AMSAT-I-MP, 4300 Goodfellow Blvd., St. Louis, MO 63120-1798. You may also submit your recommended changes by E-mail directly to
. A reply will be furnished directly to you. Instructions for sending an electronic 2028 may be found at the back of this manual immediately preceding the hard copy 2028.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. TABLE OF CONTENTS PAGE Section I
Introduction ..........................................................................................
Section II Group 00 Group 01
Repair Parts List ................................................................................... Pumping Assembly 6X6 SP6 ................................................................. Noise Enclosure, Roof & Back Cover ..................................................... Noise Enclosure Front Cover ................................................................. Noise Enclosure Left Side Panel ............................................................ Noise Enclosure Right Side Panel .......................................................... Noise Enclosure Frame ......................................................................... Battery Assembly.................................................................................. Control Panel Assembly ........................................................................ Engine Accessories .............................................................................. Fuel Fill and Air Cleaner ........................................................................ Engine Assembly .................................................................................. Oil Line and Cartridge ........................................................................... Oil Breather Assembly........................................................................... Fuel Injection Lines ............................................................................... Fuel Injector and Pump ......................................................................... Alternator ............................................................................................. Starter Assembly .................................................................................. Turbocharger Assembly and Air Discharge Assembly .............................. Intake and Exhaust Manifold.................................................................. i
Group 02 Group 03 Group 04
1
1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 9-1 10-1 11-1 12-1 13-1 14-1 15-1 16-1 17-1 18-1
ILLUS/ FIGURE
TM 10-4320-315-24P
TABLE OF CONTENTS - CONTINUED PAGE Group 04 Cont.
Group 05 Group 06
Group 07
Air Cowling Base Assembly .................................................................. Flywheel Assembly .............................................................................. Cylinder Head Assembly ...................................................................... Cylinder and Piston .............................................................................. Oil Pan Assembly and Suction Tube Assembly ...................................... Connecting Rod Assembly ................................................................... Front Cover Assembly .......................................................................... Oil Pump Assembly and Oil Pump Discharge Pipe ................................. Crankcase Assembly and Crankshaft Assembly .................................... Pump Assembly ................................................................................... Trailer Assembly .................................................................................. Tail Light, Wiring Harness, and Jack Assembly ...................................... Reflector Axle Assembly and Spring and Suspension Kit ........................ Battery Box and Chassis ...................................................................... Bulk Materials List ................................................................................
Section III.
Special Tools List (Not Applicable)
Section IV.
Cross Reference Index National Stock Number Index ............................................................... Part Number Index ............................................................................... Figure and Item Number Index ..............................................................
ii
19-1 20-1 21-1 22-1 23-1 24-1 25-1 26-1 27-1 28-1 29-1 30-1 31-1 32-1 BULK-1
I-1 I-3 I-20
ILLUS/ FIGURE
TM 10-4320-315-24P UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST SECTION I. INTRODUCTION 1. Scope. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of unit, direct support, and general support maintenance of the pumping assembly. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as indicated by the source, maintenance, and recoverability (SMR) codes. 2. General. In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections: a. Section II - Repair Parts List A list of spares and repair parts authorized by this RPSTL for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence. Repair parts kits or sets are listed separately in their own functional group within Section II. b. Section lIl. Special Tools List - Not Applicable. c. Section IV. Cross-reference Indexes. A list, in National Item Identification Number (NIIN) sequence, of all National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration figure and item number appearance. The figure and item number index lists figure and item numbers in alphanumeric sequence and cross-references NSN, CAGEC and part numbers. 3. Explanation of Columns (Section II). a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration. b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as shown in the following breakout Source Code XX
Maintenance Code st
1 two positions
How you get an item.
Recoverability Code
XX 3d position Who can install, replace or use the item.
XX 4th position Who can do complete repair (see note) on the item.
Who determines disposition action on an unserviceable item.
* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the a Repair" function in a use/user environment in order to restore serviceability to a failed item.
1
TM 10-4320-315-24P (1) Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul of an end item/equipment. Explanations of source codes follows: Code PA PB PC** PD PE PG
KD KF KB
Explanation
}
Stocked items; use the applicable NSN to request/ requisition items with these source codes. They are authorized to the category indicated by the code entered in the 3d position of the SMR code. **NOTE: Items coded PC are subject to deterioration.
}
MO-(Made at unit AVUM Level) MF-(Made at DS AVUM Level) MH-(Made at GS Level) ML-(Made at Specialized Repair Activity (SRA)) MD-(Made at Depot)
AO-(Assembled by unit/AVUM Level) AF-(Assembled by DS/AVIM Level) AH-(Assembled by GS Category) AL-(Assembled by SRA) AD-(Assembled by Depot)
Items with these codes are not to be requested/ requisitioned individually. They are part of a kit which is authorized to the maintenance category indicated in the 3d position of the SMR code. The complete kit must be requisitioned and applied,
} }
Explanation Items with these codes are not to be requested/ requisitioned individually. They must be made from bulk material which is identified by the part number in the DESCRIPTION and USABLE ON CODE (UOC) column and listed in the Bulk Material group of the repair parts list in the RPSTL. If the item is authorized to you by the 3d position code of the SMR code, but the source code indicates it is made at a higher level, order the item from the higher level of maintenance.
Explanation Items with these codes are not to be requested/ requisitioned individually. The parts that make up the assembled item must be requisitioned or fabricated and assembled at the level of maintenance indicated by the source code. If the 3d position code of the SMR code authorizes you to replace the item, but the source code indicates the items are assembled at a higher level, order the item from the higher level of maintenance.
2
TM 10-4320-315-24P Code
Explanation
XA--Do not requisition an "XA" -coded item. Order its next higher assembly. (Also, refer to the NOTE below.) XB--If an "XB" item is not available from salvage, order it using the CAGE and part number given. XC--Installation drawing, diagram, instruction sheet field service drawing, that is identified by manufacturer's part number. XD--Item is not stocked. Order an 'XD' -coded item through normal supply channels using the CAGE and part number given, if no NSN is available.
NOTE Cannibalization or controlled exchange, when authorized, may be used as a source of supply for items with the above source codes, except for those source coded "XAU or those aircraft support items restricted by requirements of AR 70042.
(2) Maintenance Code. Maintenance codes tells you the level(s) of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the SMR Code as follows: (a) The maintenance code entered in the third position tells you the lowest maintenance level authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to one of the following levels of maintenance. Code
Application/Explanation
C
--Crew or operator maintenance done within unit or aviation unit maintenance.
O
--Unit or aviation unit category can remove, replace, and use the item.
F
--Direct support or aviation intermediate level can remove, replace, and use the item.
H
--General support level can remove, replace, and use the item.
L
--Specialized repair activity can remove, replace, and use the item.
D
--Depot level can remove, replace, and use the item.
(b) The maintenance code entered in the fourth position tells whether or not the item is to be repaired and identifies the lowest maintenance level with the capability to do complete repair (i.e., perform all authorized repair functions.) NOTE: Some limited repair may be done on the item at a lower level of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes. This position will contain one of the following maintenance codes:
3
TM 10-4320-315-24P Code
Application/Explanation
O
--Unit or (aviation unit) is the lowest level that can do complete repair of the item.
F
--Direct support or aviation intermediate is the lowest level that can do complete repair of the item.
H
--General support is the lowest level that can do complete repair of the item.
L
--Specialized repair activity (designate the specialized repair activity) is the lowest level that can do complete repair of the item.
Z
--Nonreparable. No repair is authorized.
B
--No repair is authorized. (No parts or special tools are authorized for the maintenance of a "B" coded item). However, the item may be reconditioned by adjusting, lubricating, etc., at the user level.
(3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows:
Recoverability Codes
Application/Explanation
Z
--Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in 3d position of SMR Code.
O
--Reparable item. When uneconomically reparable, condemn and dispose of the item at unit or aviation unit level.
F
--Reparable item. When uneconomically reparable, condemn and dispose of the item at the direct support or aviation intermediate level.
H
--Reparable item. When uneconomically reparable, condemn and dispose of the item at the general support level.
D
--Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item not authorized below depot level.
L
--Reparable item. Condemnation and disposal not authorized below specialized repair activity (SRA).
A
--Item requires special handling or condemnation procedures because of specific reasons (e.g., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions.
c. CAGEC (Column (3)). The Manufacturer Commercial and Government Entity (CAGE) is a 5-digit numeric code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by 4
TM 10-4320-315-24P means of its engineering drawings, specification standards, and inspection requirements to identify an item or range of items. NOTE When you use a NSN to requisition an item, the item you receive may have a different part number from the part ordered.
e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following information: (1) The Federal item name and, when required, a minimum description to identify the item. (2) Items that are included in kits and sets are listed below the name of the kit or set. (3) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry. (4) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be manufactured/fabricated. (5) When the item is not used with all serial numbers of the same model, the effective serial numbers are shown in the last line(s) of the description. (6) The usable on code, when applicable. (Refer to paragraph 5, Special Information.) (7) The statement "END OF FIGURE" appears just below the last item description in Column 5 for a given figure in Section II. f. QTY (Column (6)). The QTY (quantity per figure) column indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a quantity indicates that the quantity is variable and the quantity may vary from application to application. 4. Explanation of Columns (Section IV). a. NATIONAL STOCK NUMBER (NSN) INDEX. (1) STOCK NUMBER column. This column lists the NSN by National item identification number (NIIN) sequence. The NIIN consists of the last nine digits NSN of the NSN, (i.e., 5305-01-5741467). When using this column to locate an NIIN item, ignore the first 4 digits of the NSN. However, the complete NSN should be used when ordering items by stock number. (2) FIG. column. This column lists the number of the figure where the item is identified/located. The figures are in numerical order in Section II. (3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG. column. This item is also identified by the NSN listed on the same line. 5
TM 10-4320-315-24P b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order). (1) CAGEC column. The Manufacturer Commercial and Government Entity (CAGE) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. (3) STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer identified in the PART NUMBER and CAGE columns to the left. (4) FIG. column. This column lists the number of the figure where the item is identified/located in Section Il. (5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in adjacent figure number column. c. FIGURE AND ITEM NUMBER INDEX. (1) FIG. column. This column lists the number of the figure where the item is identified/located in Section II. (2) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. (3) STOCK NUMBER column. This column lists the NSN for the item. (4) CAGEC column. The Manufacturer Commercial and Government Entity (CAGE) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. 5. SPECIAL INFORMATION. a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description Column heading. Usable on codes are shown as "UOC:.." in the Description Column (justified left) on the last line of the applicable item description/nomenclature. Uncoded items are applicable to all models. b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the line entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be manufactured or fabricated are found in TM 10-4320-315-24, Pumping Assembly, Water, 600 GPM, Trailer Mounted. c. INDEX NUMBERS. Items which have the word BULK in the figure column will have an index number shown in the item number column. This index number is a cross-reference between the National Stock Number/Part Number Index and the bulk material list in Section II.
6
TM 10-4320-315-24P d. ASSOCIATED PUBLICATIONS. The publication listed below pertains to the Pumping Assembly and its components. TM 10-4320-315-10 Pumping Assembly, Water, 600 GPM, Trailer Mounted Operator's Manual TM 10-4320-315-24
Pumping Assembly, Water, 600 GPM, Trailer Mounted Unit, Direct Support and General Support Maintenance Manual
6. HOW TO LOCATE REPAIR PARTS. a. When National Stock Number or Part Number is NOT Known. (1) First. Using the table of contents, determine the assembly group or subassembly group to which the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are divided into the same groups. (2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs. (3) Third. Identify the item on the figure and note the item number. (4) Fourth. Refer to the Repair Parts List for the figure to find the part number for the item number noted on the figure. (5) Fifth. Refer to the Part Number Index to find the NSN, if assigned. b. When National Stock Number or Part Number is Known: (1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinent National Stock Number or Part Number. The NSN index is in National Item Identification Number (NIIN) sequence (see 4a(1)). The part numbers in the Part Number index are listed in ascending alphanumeric sequence (see paragraph 4b). Both indexes cross-reference you to the illustration figure and item number of the item you are looking for. (2) Second. Turn to the figure and item number, verify that the item is the one you are looking for, then locate the item number in the repair parts list for the figure. 7. ABBREVIATIONS. Abbreviations used in this manual are listed in MIL-STD-12. 8. WARRANTY OF DATA. a. Technical data means recorded information, regardless of form or characteristic, of a scientific or technical nature. It may, for example, document research, experimental, development or engineering work; or be usable or used to define a design or process or to procure, product support, maintain, or operate materiel. The data may be graphic or pictorial delineation’s in media such as drawings or photographs; text in specifica- tion or related performance or design typed documents; or computer printouts. Examples of technical data include research and engineering data, engineering drawings and associated lists, specifications, standards, process sheets, manuals, technical reports, catalog item identifications, and related information, and documen- tation related to computer software. Technical data does not include computer software or financial, ad- ministrative, cost and pricing, and management data, or other information incidental to contract administration. b. Notwithstanding inspection and acceptance by the Government of technical data furnished under this contract and notwithstanding any provision of this contract concerning the conclusiveness thereof, the Contractor warrants that all technical data delivered under this contract will at the time of delivery conform with the specifications and all other requirements of this contract. The warranty period shall extent for three (3)
7
TM 10-4320-315-24P years after completion of the delivery of the line item of data (as identified in DD Form 1423) of which the data forms a part; or any longer period specified in the contract. c. The Contractor agrees to notify the Contracting Officer in writing immediately of any breach of the above warranty which the Contractor discovers within the warranty period. d. The following remedies shall apply to ail breaches of the above warranty provided that the Government notifies the Contractor of the breach in writing within the warranty period. (1) Within a reasonable time after the Contracting Officer notifies the Contractor of a breach of warranty, he may: (i) by written notice, direct the Contractor to correct or replace at his expense the nonconforming technical data promptly; or (ii) if he determines that the Government no longer has a requirement for correction or replacement of the data, or that the data can be more reasonably corrected by the Government, inform the Contractor by written notice that the Government elects a price or fee adjustment in lieu of correction or replacement. (2) If the Contractor refuses or fails to comply with a direction under (1)(i) above, the Contracting Officer may, within a reasonable time of such refusal or failure: (i) by contract or otherwise, correct or replace the nonconforming technical data and charge the Contractor the cost occasioned to the Government thereby; or (ii) elect a price or fee adjustment in lieu of correction or replacement. (3) The remedies set forth in this clause represent the exclusive means by which the rights conferred on the Government by this clause may be enforced. f. The provisions of this clause apply anew to that portion of any technical data which is corrected or furnished in replacement under (d)(1)(i) above.
8
TM 10-4320-315-24P
Figure 1. Noise Enclosure, Roof & Back Cover (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 1. Noise Enclosure, Roof &Back Cover (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) GROUP 00 NOISE ENCLOSURE FIG. 1 NOISE ENCLOSURE, ROOF, AND BACK COVER
1 2 3 4 5 6 7 8
XBFFF PAFZZ PAFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ
04042 96906 96906 04042 96906 04042 2S956 81518
9 10 11 12 13 14 15 16 17 18
PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBFZZ XBFZZ XBFZZ XBFZZ
96906 62503 62503 62503 62503 62503 04042 04042 04042 04042
9016-235-3-1 MS35297-6 MS35338-44 9016-235-14-1 MS24243/10604 9016-235-18-1 68104 CWGS-4.5 ID X 14 4 IN LG MS24662-21 D-9021-2 D-9021-11 D-9021-14 D-9021-16 D-9021-15 9016-235-20-1 9016-235-20-2 9016-235-10-1 9016-235-10-2
NOISE ENCLOSURE . ......................................... 1 .SCREW, CAP, HEXAGON H .............................. 61 .WASHER,LOCK ................................................. 41 .ROOF.................................................................. 1 .RIVET ................................................................. 13 .DUCT ................................................................. 1 .CLAMP,WORM DRIVE ....................................... 2 .HOSE,FLEXIBLE DUCT ...................................... 1 .RIVET.................................................................. 20 .IDENT PLATE,SPEC .......................................... 1 .IDENT PLATE,DATA .......................................... 1 .WARNING PLATE,TRANS ................................. 1 .IDENT PLATE,DISCH ........................................ 1 .IDENT PLATE,SUCTION .................................... 1 .PLATE,LEFT ...................................................... 1 .PLATE,RIGHT .................................................... 1 .PANEL,REAR,LEFT ........................................... 1 .PANEL,REAR,RIGHT ......................................... 1 END OF FIGURE
1-1
(6) QTY
TM 10-4320-315-24P
Figure 2. Noise Enclosure Front Cover
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) GROUP 01 NOISE ENCLOSURE FIG. 2 NOISE ENCLOSURE FRONT COVER
1 2 3 4 5 6. 7 8 9 10 11 12 13 14
PAFZZ PAFZZ XBFZZ PAFZZ XBFZZ XAFZZ XBFZZ XBFZZ PAOZZ PAOZZ PAOZZ XBOZZ PAOZZ PAOZZ
96906 96906 04042 96906 04042 04042 98003 98003 96906 96906 96906 39428 96906 96906
MS35297-6 MS35338-44 9016-235-13-1 MS24243/10604 9016-235-24-1 9016-235-28-6 HA946LS-1-RG HC209ZE MS24662-21 MS51971-1 MS27183-48 3594T24 MS35338-6 MS35307-307
.SCREW,CAP,HEXAGON H................................. 13 .WASHER,LOCK.................................................. 13 .COVER,FRONT .................................................. 1 .RIVET.................................................................. 19 ..DOOR ASSY ...................................................... 1 ... HINGE.............................................................. 1 ... HANDLE........................................................... 1 ... CATCH............................................................. 2 ... RIVET .............................................................. 1 ..NUT,PLAIN,HEXAGON . .................................... 1 ..WASHER,FLAT.................................................. 1 ..CHAIN . .............................................................. 2 ..WASHER,LOCK ................................................ 1 ..SCREW,CAP,HEXAGON H ............................... 1 END OF FIGURE
2-1
(6) QTY
TM 10-4320-315-24P
Figure 3. Noise Enclosure Left Side Panel (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 3. Noise Enclosure Left Side Panel (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) GROUP 01 NOISE ENCLOSURE FIG. 3 NOISE ENCLOSURE LEFT SIDE PANEL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
PAFZZ XBFZZ XBFZZ PAFZZ PAFZZ PAFZZ PAOZZ XBOZZ XBFZZ XBFZZ XBFZZ PAOZZ XBOZZ XBFZZ XBFZZ XBFZZ XBFZZ XBDZZ XBFZZ XBFZZ XBFZZ PAOZZ
96906 04042 04042 96906 96906 96906 96906 62503 04042 04042 19220 96906 62503 04042 04042 04042 98003 81348 04042 04042 04042 96906
MS24243/10604 9016-235-41-4 9016-235-27-7 MS35297-6 MS35338-44 MS35649-2252 MS24662-21 D-9021-13 9016-235-8-1 9016-235-21-1 5601U MS24662-21 D-9021-13 9016-235-22-2 9016-235-26-1 9016-235-28-3 HC209ZE MIL-P-5304A 9016-235-9-1 9016-235-22-3 9016-235-28-4 MS27183-10
.RIVET ................................................................. 66 .ANGLE ............................................................... 1 .ANGLE ............................................................... 1 .SCREW,CAP,HEXAGON H................................. 16 .WASHER,LOCK.................................................. 20 .NUT,PLAIN,HEXAGON ....................................... 8 .RIVET ................................................................. 8 .IDENT PLATE,CABLE ........................................ 1 .PANEL,LEFT....................................................... 1 ..DOOR ASSEMBLY............................................. 1 ..HOLDER,DOOR ................................................ 2 ..RIVET ................................................................ 4 ..IDENT PLATE,CABLE........................................ 1 ..DOOR ASSY ..................................................... 1 ..GUIDE................................................................ 2 ..HINGE................................................................ 1 ..CATCH .............................................................. 4 .CAUTION PLATE ............................................... 1 .PANEL,LEFT,REAR ........................................... 1 ..DOOR ASSY ...................................................... 1 ... HINGE.............................................................. 1 .WASHER,FLAT................................................... 3 END OF FIGURE
3-1
(6) QTY
TM-10-4320-315-24P
Figure 4. Noise Enclosure Right Side Panel (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 4. Noise Enclosure Right Side Panel (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) GROUP 01 NOISE ENCLOSURE FIG. 4 NOISE ENCLOSURE RIGHT SIDE PANEL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
PAFZZ PAFZZ PAFZZ PAFZZ PAFZZ PAFZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBOZZ
96906 96906 80204 96906 96906 96906 62503 62503 62503 62503 81348 62503 04042 04042 04042 98003 19220 04042 04042 04042 04042 62503
MS35297-6 MS35338-44 B1821BHO25C250N MS27183-10 MS35649-2252 MS24243/10604 D-9021-1 1437-1 1437-3 1437-6 MIL-P-53054A D-9021-8 9016-235-11-1 9016-235-22-4 9016-235-28-5 HC209ZE 5601U 9016-235-22-1 9016-235-28-2 9016-235-12-1 9016-235-44-1 D-9021-3
.SCREW,CAP,HEXAGON H................................. 8 .WASHER,LOCK.................................................. 24 .SCREW,CAP,HEXAGON H................................. 8 .WASHER,FLAT .................................................. 8 .NUT,PLAIN,HEXAGON ...................................... 8 .RIVET ................................................................. 55 .CAUTION PLATE,RPM . ..................................... 1 .IDENT PLATE,OCP ............................................ 1 .PLATE,CONTROL IDENT ................................... 1 .IDENT PLATE,AIR RES ...................................... 1 .PLATE,CAUTION,EAR ....................................... 2 .CAUTION PLATE,FUEL ..................................... 1 .PANEL,RIGHT .................................................... 1 ..DOOR ASSY ..................................................... 1 ... HINGE ............................................................. 1 ...CATCH.............................................................. 6 ..HOLDER,DOOR................................................. 4 ..DOOR ASSY ...................................................... 1 .HINGE................................................................. 1 .PANEL ASSY, CONTROL ................................... 1 ..COVER,HINGED ............................................... 1 .IDENT PLATE,CONTROL ................................... 1 END OF FIGURE
4-1
(6) QTY
TM 10-4320-315-24P
Figure 5. Noise Enclosure Frame (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 5. Noise Enclosure Frame (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 01 NOISE ENCLOSURE FIG. 5 NOISE ENCLOSURE FRAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBOZZ XBOZZ PAFZZ PAFZZ PAFZZ PAFZZ XBFZZ PAFZZ PAFZZ PAFZZ XBFZZ XBFZZ
96906 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 62503 62503 96906 96906 96906 96906 04042 96906 96906 96906 04042 04042
MS24243/10604 9016-235-27-3 9016-235-27-4 9016-235-39-1 9016-235-15-2 9016-235-27-2 9016-235-27-5 9016-235-27-6 9016-235-17-1 9016-235-15-1 9016-235-51-1 9016-235-27-7 9016-235-49-1 0223-4923 D-9021-12 MS27183-14 MS35297-64 MS35338-46 MS35649-2352 9016-235-25-1 MS35297-12 MS35338-44 MS35649-2252 9016-235-16-1 9016-235-16-2
.RIVET.................................................................. .ANGLE ................................................................ .ANGLE ................................................................ .CHANNEL ........................................................... .DIVIDER.............................................................. .ANGLE ................................................................ .ANGLE ................................................................ .ANGLE ................................................................ .ENCLOSURE ...................................................... .DIVIDER ............................................................. ..BUMPER ............................................................ ..ANGLE ............................................................... DIVIDER............................................................... GASKE................................................................. .PLATE,DATA,OIL FILL........................................ WASHER,FLAT.................................................... SCREW,CAP,HEXAGON.. ................................... WASHER,LOCK................................................... NUT...................................................................... .FRAME................................................................ SCREW,CAP,HEXAGON. .................................... WASHER,LOCK................................................... .NUT,PLAIN,HEXAGON. ...................................... CHANNEL ............................................................ CHANNEL. ........................................................... END OF FIGURE
5-1
36 1 1 1 1 1 1 1 1 1 1 2 1 1 1 4 4 4 4 1 27 27 27 2 2
TM 10-4320-315-234P
Figure 6. Battery Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 02 ELECTRICAL SYSTEM FIG. 6 BATTERY ASSEMBLY
1 2 3 4 5 6 7 8 9 10 11 12
PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ XBOZZ PAOZZ
96906 96906 62503 62503 62503 62503 62503 96906 96906 96906 62503 96906
HS35310-357 MS35338-122 D-9020-25 D-9020-26 D-9020-22 D-9020-23 D-9020-24 MS90725-6 MS35338-44 MS51967-2 D-9020-27 MS52149-2
SCREW,CAP,HEX HEAD..................................... WASHER,LOCK................................................... CABLE,BATTERY ................................................ CABLE,BATTERY ................................................ CABLE,BATTERY ................................................ CABLE,BATTERY ................................................ CABLE,BATTERY ................................................ SCREW,CAP,HEXAGON H.................................. WASHER,LOCK................................................... NUT,PLAIN,HEXAGON ........................................ BATTERY BRACKET ........................................... BATTERY,STORAGE .......................................... END OF FIGURE
6-1
2 2 1 1 1 1 1 2 2 2 1 2
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 1 of 8)
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 2 of 8)
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 3 of 8)
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 4 of 8)
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 5 of 8)
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 6 of 8)
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 7 of 8)
TM 10-4320-315-24P
Figure 7. Control Panel Assembly (Sheet 8 of 8)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 02 ELECTRICAL SYSTEM FIG. 7 CONTROL PANEL ASSEMBLY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
PAOZZ PAOZZ PAOZZ XBFZZ PAOZZ PAOZZ PADZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ XBOZZ PAOZZ XBOZZ PAOZZ XBOZZ PAOZZ PAOZZ XBOZZ XBOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ PAOZZ PAOZZ XBOZZ XBOZZ PAOZZ PAOZZ PAOZZ XBOZZ PAOZZ XBOZZ XBOZZ PAOZZ XBODD
80204 96906 96906 5Z683 96906 96906 96906 62503 62503 62503 62503 62503 62503 57684 57684 57684 57684 96906 57684 52159 52159 02570 02570 96906 11649 11649 02570 02570 02570 11649 12623 02570 62503 96906 96906 96906 4P812 95146 96906 96906 96906 22973 08108 05824 95146 96906 05624
B1821BH038C113N NS35338-46 MS51967-8 000-01125 MS25041-2 MS25237-327 MS24243-10604 D-9021-10 1437-2 1437-4 1437-5 1437-3 1437-12 R9054 R7934 R9021 R9090 MS24532-2 REV G R85305 25504-25B21GAD 25104-25B21GAD B-400-1-4 B-400-8-4 MS21333-101 SS-4BRT-12 SS-4BHT-24 B-400-3 B-401-PC B-400-3-4TMT SS-4BHT-36 B-L62TF4 B-400-11-4 70-6 MS27407-2 HS24523-23 MS24659-23D E-1000-F2-352 57F2356 MS90725-8 MS35338-44 MS51971-1 930-720-28 ML313 E19-283 57F2350 MS35191-276 DYN240027-000-0-24
SCREW, CAP, HEXAGON H................................ 4 WASHER, LOCK.................................................. 4 NUT, PLAIN, HEXAGON ...................................... 4 CONTROL PANEL ASSY ..................................... 1 LIGHT, INDICATOR ............................................. 3 LAMP, INCANDESCENT...................................... 3 PIVET................................................................... 40 PLATE, LOCK-UNLOCK....................................... 2 PLATE, CONTROL IND........................................ 1 IDENT PLATE, SUCTION..................................... 1 IDENT PLATE, DISCH ......................................... 1 PLATE, CONTROL IDENT ................................... 1 PLATE, DRINKING WATE ................................... 1 GAUGE, ENG TEMP............................................ 1 RESISTOR, VOLT DR.......................................... 3 GAUGE, OIL PRESS............................................ 1 GAUGE, FUEL LEVEL ......................................... 1 METER, SPECIAL SCALE ................................... 1 METER, TACH/RUN TIME ................................... 1 GAUGE, PRES SUCTION .................................... 1 GAUGE, PRESS DISCH....................................... 1 ADAPTER, STRAIGHT, PI ................................... 4 ELBOW, PIPE TO TUBE...................................... 2 CLAMP, LOOP ..................................................... 2 HOSE ASSEMBLY, NONME ................................ 3 HOSE ASSEMBLY ............................................... 1 TEE, TUBE........................................................... 2 COUPLING BODY, TUBE .................................... 2 TEE, PIPE TO TUBE............................................ 2 HOSE ASSEMBLY, NONME ................................ 2 VALVE, BALL ....................................................... 2 ADAPTER, STRAIGHT, PI ................................... 2 NIPPLE, CHASE .................................................. 1 SWITCH, TOGGLE .............................................. 1 SWITCH, TOGGLE .............................................. 1 SWITCH, TOGGLE .............................................. 1 RHEOSTAT.......................................................... 1 KNOB ................................................................... 1 SCREW, CAP, SLOTTED ................................... 4 WASHER, LOCK.................................................. 4 NUT, PLAIN, HEXAGON ...................................... 4 PANEL LIGHT ...................................................... 2 LAMP, INCANDESCENT...................................... 2 POTENTIOMETER, THROT................................. 1 KNOB ................................................................... 1 SCREW, MACHINE.............................................. 10 PRESSURE CONTROL........................................ 1
7-1
SECTION II (1) (2) ITEM SMR NO CODE 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82
PAOZZ PAOZZ PAOZZ XBOZZ PAOZZ PAFFF XBODD PAFFF PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ XBOZZ PAOZZ PAOZZ PAOZZ PAOZZ XBOZZ XBOZZ PAOZZ XBOZZ XBOZZ PADZZ PAOZZ PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ
(3) CAGEC 96906 96906 96906 05624 96906 05624 78388 05624 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 05624 77342 96906 19207 96906 96906 96906 96906 96906 62503 62503 60642 06970 62503 62503 62503
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY MS3112E16-8P MS3112E18-11P MS51971-2 DYN110807-000-0-24 MS3470W20-16P DYNK-207 EPS-1-04 DYNK-208 MS90725-20 MS35338-27 MS51922-17 MS35307-360 MS35338-141 MS51971-3 D-9010-3 MS51922-18 MS27183-56 MS51922-21 MS35309-368 DYNC11220-300-0-24 KUHP-5DT1-24 MS18212-17 11674728 11675004-1 MS35307-314 MS35340-44 MS51922-1 MS24661-25 D-9021-4 D-9020-102 000-03528-0084 29V00-95 1437-17 1437-16 1437-15
CONNECTOR, RECEPTACL ............................... CONNECTOR, RECEPTACL ............................... NUT, PLAIN, HEXAGON ...................................... GOVERNOR, ELECTRONIC ................................ CONNECTOR, RECEPTACL .............................. WIRING HARNESS.............................................. MODULE, ENG PROT.......................................... WIRING HARNESS.............................................. SCREW, CAP, HEXAGON H................................ WASHER ............................................................. NUT, SELF-LOCKING, HE ................................... SCREW, CAP, HEXAGON H................................ WASHER, LOCK.................................................. NUT, PLAIN, HEXAGON ...................................... BRACKET ............................................................ NUT, SELF-LOCKING, HE ................................... WASHER, FLAT................................................... NUT, SELF-LOCKING, HE ................................... SCREW, CAP, HEXAGON H................................ ACTUATOR.......................................................... RELAY ................................................................. SCREW, MACHINE............................................ CONNECTOR, RECEPTACL ............................... CAP...................................................................... SCREW, CAP, HEXAGON H................................ WASHER, LOCK.................................................. NUT, SELF-LOCKING HE .................................... RIVET................................................................... PLATE, IDENT, RCPT.......................................... HARNESS, WIRING............................................. CABLE ASSY, AUTO DSB ................................... CABLE ASSY, MNL THRO................................... PLATE, IDENT ..................................................... PLATE, IDENT ..................................................... PLATE, IDENT ..................................................... END OF FIGURE
7-2
1 1 2 1 1 1 1 1 4 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 4 4 4 2 1 1 1 1 1 1 1
TM 10-4320-315-24P
Figure 8. Engine Accessories (Sheet 1 of 4)
TM 10-4320-315-24P
Figure 8. Engine Accessories (Sheet 2 of 4)
TM 10-4320-315-24P
Figure 8. Engine Accessories (Sheet 3 of 4)
TM 10-4320-315-24P
Figure 8. Engine Accessories (Sheet 4 of 4)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 03 ENGINE ACCESSORIES FIG. 8 ENGINE ACCESSORIES
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
PAOZZ XBOZZ XBOZZ PAOZZ PAOZZ PAOZZ PAOZZ XBOZZ XBOZZ PAOZZ PAOZZ PAOZZ XBOOF PAOZZ XBFFF XBOZZ XBOZZ XBOZZ PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ
26 XBOZZ 27 XBOZZ 28 XBOZZ 29 XBOZZ 30 XBOZZ 31 XBOZZ 32 XBOZZ
80204 62503 62503 96906 96906 96906 96906 76700 62503 96906 96906 96906 78280 78280 05624 05624 57684 57684 96906 96906 62445 3T557 3T557 79470 3T557
B1821BHO38ClOON D-9015-4 D-9020-20 MS14304-2J04 MS35307-315 MS35338-44 MS51971-1 43230P D-9015-3 MS35307-350 MS35338-46 MS51971-3 QS-1003 LP535 DYNK-209 10100 R8956 R8917 MS35307-308 MS35338-118 R8925 103BLK06-32-H3F 103BLK06-32-6MS- H3F 1468X4X4 04TT-16-50-4M-4M90
SCREW, CAP, HEXAGON H................................ FLEX CONNECTOR............................................. ELBOW WITH DRAIN .......................................... PLUG, PIPE ......................................................... SCREW, CAP, HEXAGON H................................ WASHER, LOCK.................................................. NUT, PLAIN, HEXAGON ...................................... MUFFLER ............................................................ .BRACKET ........................................................... SCREW, CAP, HEX HEAD................................... WASHER, LOCK.................................................. NUT, PLAIN, HEXAGON ...................................... CYLINDER, ENGINE STA .................................... .CARTRIDGE, ENGINE ST .................................. WIRING HARNESS.............................................. MAGNETIC PICKUP ............................................ SENDER, TEMPERATURE .................................. TRANSMITTER, PRESSUR ................................. SCREW, CAP, HEXAGON H................................ WASHER, LOCK.................................................. SENDER, FUEL LEVEL........................................ UNION ASSY ....................................................... UNION ASSY ....................................................... ADAPTER, STRAIGHT, PI ................................... HOSE ASSY, EXCESS FU BULKHEAD TO ........ SELECTOR 3T557 04TT48-4M-4M90 HOSE ASSY, EXCESS FU BULKHEAD TO ........ SELECTOR 3T557 6RC45-65-4M90 HOSE ASSY, FUEL SPLY TANK TO................... SELECTOR 3T557 6RC36-4M45-4M90 HOSE ASSY, FUEL SPLY ENGINE TO .............. SELECTOR. 3T557 04TT76-108JCC-4MP90 HOSE ASSY, EXCESS FU ENGINE TO.............. SELECTOR 3T557 6RC15-50-4MP90-6 HOSE ASSY, FUEL SPLY BULKHEAD TO ......... SELECTOR. 88763 11455D-4W/C VALVE, FUEL WHEN REPL VALVE, RE-USE .... PIPE PLUG BOT PORT. 62503 D-9020-106 HARNESS, WIRING ............................................ END OF FIGURE
8-1
3 1 1 1 4 4 4 1 2 4 4 4 1 1 1 1 1 1 5 1 1 1 1 2 1 1 1 1 1 1 2 1
TM 10-4320-315-24P
Figure 9. Fuel Fill and Air Cleaner (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 9. Fuel Fill and Air Cleaner (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 03 ENGINE ACCESSORIES FIG. 9 FUEL FILL AND AIR CLEANER
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ
96906 96906 96906 96906 96906 96906 96906 1DG36 62503 88044 88044 1DG36 18265 18265 18265 60342 60342 62503 62503
20 21 22 23 24 25 26 27
XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ XBOZZ
79470 79470 79470 22031 88763 59150 96906 62503
MS35644-1 MS35645-1 MS35643-1 MS24629-2 MS90725-60 MS35338-46 MS51967-8 P10-5533 65-0-9020-55 AN735-64 AN735-48 P11-4319 FHGO9-0022 XLP18-2063 P11-9778 P11-2667 P10-1870 66-0-9020-56 12RC48-DWG-12FP W109 3750X2 1484X4 NT10004 5405-2-2 103CC 76248-2 MS24662-21 D-9021-5
FILLER NECK ...................................................... CAP, FILLER OPENING INCLUDES CHAIN ....... GASKET............................................................... SCREW, TAPPING .............................................. SCREW, CAP, HEXAGON H................................ WASHER, LOCK.................................................. NUT, PLAIN, HEXAGON ...................................... ELBOW ................................................................ INTAKE LINE ....................................................... CLAMP, WORM DRIVE........................................ BRACKET, CLAMPING ........................................ BOOT, RUBBER .................................................. AIR CLEANER...................................................... ELEMENT ASSEMBLY......................................... ELEMENT ASSEMBLY......................................... CUP, RUBBER ..................................................... NUT, WING, PLASTIC ......................................... INTAKE LINE ....................................................... OIL DRAIN LINES ................................................
1 1 1 6 4 4 4 2 1 6 2 1 1 1 1 1 2 1 1
TEE, PIPE ............................................................ INSERT, TUBE FITTING ...................................... TUBING, NONMETALLIC..................................... ADAPTER, STEEL ............................................... VALVE, NEEDLE.................................................. INDICATOR ASSY, AIR ....................................... RIVET................................................................... IDENT PLATE, OIL SPL .......................................
1 1 6 1 1 1 2 1
END OF FIGURE
9-1
TM 10-4320-315-24P
Figure 10. Engine Assembly (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 10. Engine Assembly (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 04 ENGINE ASSEMBLY FIG. 10 ENGINE ASSEMBLY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
PAOZZ PAOZZ XBOZZ PAOZZ XBOFD PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOOO XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZA PAOZZ XBOZZ PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ
96906 96906 2X949 96906 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 96906 96906 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
MS35307-468 MS35338-50 5032 MSS1971-7 BF6L912B 223-5816 223-5181 111-1218 110-7101 110-3735 111-2824 223-5461 111-2858 223-3443 111-1602 223-5474 110-7844 112-3665 213-4799 223-5467 110-9048 223-5466 111-9246 111-8693 117-4016 117-3697 111-0577 224-8154 111-2232 111-8642 224-8132 117-4483 117-4482 132-0402 MS35307-358 MS27183-13 213-6434 113-2314 223-7847 213-6434 111-1153 213-1153 112-2477 111-5470 415-2528 213-4884 223-8196 415-2509
SCREW, CAP, HEXAGON H................................ WASHER, LOCK.................................................. ISOLATOR, T-MOUNT ......................................... NUT, PLAIN, HEXAGON ...................................... ENGINE ASSY ..................................................... BELT, V................................................................ V-BELT, ALTERNATOR ....................................... BOLT, HEXAGON ................................................ WASHER, FLAT................................................... SCREW, CAP, HEXAGON H................................ NUT, PLAIN, HEXAGON ...................................... BLOWER, COOLING ........................................... NUT, HEX............................................................. IMPELLER............................................................ SCREW, CAP, HEXAGON H................................ PULLEY, V-GROOVED ........................................ RING, RETAINING ............................................... BEARING, BALL, ANNULA................................... SPACER, SLEEVE ............................................... BUSHING. ............................................................ BEARING, BALL, ANNULA................................... BLOWER JACKET ............................................... BOLT, FLUID PASSAGE...................................... WASHER, FLAT................................................... HOSE ASSY, FUEL.............................................. HOSE ASSY, NONMETAL ................................... SCREW................................................................ FILTER ASSEMBLY, FLU .................................... BOLT, MACHINE.................................................. RING, SEAL ......................................................... HEAD, FLUID FILTER .......................................... FILTER ELEMENT, FLUI...................................... FILTER, FLUID..................................................... PLUG, DRAIN....................................................... SCREW, CAP, HEXAGON H................................ WASHER, FLAT................................................... GASKET............................................................... SCREW, CAP, CSK ............................................. COVER ................................................................ GASKET............................................................... SCREW, CAP, HEXAGON H................................ PULLEY, V-GROOVED ........................................ NUT, PLAIN, HEXAGON ...................................... PIN, STRAIGHT ................................................... LEVER, PULLEY .................................................. WASHER, FLAT................................................... WASHER, FLAT................................................... WASHER, THRUST .............................................
10-1
4 4 4 4 1 1 1 3 5 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 1 1 2 1 1 1 1 1 1 2 5 5 1 1 1 1 1 1 1 1 1 1 3 1
SECTION II (1) (2) ITEM SMR NO CODE 49 50 51 52 53 54 55 56 57 58
XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ
(3) CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY 415-2517 121-6108 117-4194 415-3128 116-6111 117-4191 117-4192 223-8083 223-8081 223-8021
WASHER, THRUST ............................................. WASHER, FLAT................................................... SCREW, CAP, HEXAGON H................................ COVER, IDLER PULLEY...................................... PACKING, PREFORMED..................................... STUD ................................................................... STUD ................................................................... WASHER, PLAIN ................................................. SHAFT ................................................................. SPRING, YOKE.................................................... END OF FIGURE
10-2
1 3 1 1 1 1 1 1 1 1
TM 10-4320-315-24P
Figure 11. Oil Line and Cartridge
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 04 ENGINE ASSEMBLY FIG. 11 OIL LINE AND CARTRIDGE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
XBOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ XBOZZ PAOZZ XBOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
223-5715 111-8707 111-2333 110-7101 112-6918 110-7548 121-6143 121-6697 223-9471 223-4903 213-4266 . 111-1382 117-4421 110-7105 415-4482 223-4896 111-8960 111-8688 223-4457 111-1193 121-6127 112-6976 . 110-7095 415-7445 121-6511 415-7694 210-1047
.
BOLT, FLUID PASSAGE...................................... PACKING, PREFORMED..................................... SCREW, CAP, HEXAGON ................................... WASHER, FLAT................................................... SCREW, CAP, SOCKET HE ................................ WASHER, FLAT................................................... RING .................................................................... STRAP, RETAINING ............................................ END PLATE ......................................................... OIL LINE .............................................................. GASKET............................................................... BOLT.................................................................... FILTER, FLUID..................................................... WASHER, FLAT................................................... GASKET............................................................... ADAPTER ............................................................ PLUG, MACHINE THREAD .................................. WASHER, FLAT................................................... SUPPORT ............................................................ BOLT, MACHINE.................................................. WASHER, FLAT................................................... BOLT, HEXAGON ................................................ WASHER, LOCK.................................................. NUT, UNION ........................................................ SLEEVE, COMPRESSION ................................... OIL COOLER ....................................................... GASKET............................................................... END OF FIGURE
11-1
1 2 2 2 3 3 3 3 3 1 1 2 1 2 2 1 1 1 1 2 4 3 3 2 2 1 1
TM 10-4320-315-24P
Figure 12. Oil Breather Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 04 ENGINE ASSEMBLY FIG. 12 OIL BREATHER ASSEMBLY
1 2 3 4 5 6 7 8
XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ
62445 62445 62445 62445 62445 62445 62445 62445
111-0573 121-6151 110-7548 223-8156 116-6343 116-6345 140-0708 213-8266
SCREW................................................................ BUSHING ............................................................. WASHER, FLAT................................................... BREATHER.......................................................... CLAMP, HOSE ..................................................... STRAPPING......................................................... HOSE, NONMETALLIC ........................................ PLATE, RETAINING............................................. END OF FIGURE
12-1
1 1 1 1 1 1 1 1
TM 10-4320-315-24P
Figure 13. Fuel Injection Lines
SECTION II (1) ITEM NO
(2) SMR CODE
TM 10-4320-315-24P (3) CAGEC
(4) PART NUMBER
(5) DESCRIPTION AND USABLE ON CODES (UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 13 FUEL INJECTION LINES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
PAOHZ PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
223-3085 415-6099 213-7568 223-3086 111-2240 111-2813 110-2797 117-0289 337-2269 117-0293 116-1469 117-0642 415-4336 415-4337 415-4338 415-4339 415-4340 415-4341
.NOZZLE, FUEL INJECTI....................................................... .RING, RETAINING................................................................ .BUSHING, SLEEVE.............................................................. .NOZZLE, FUEL INJECTI....................................................... .BOLT, MACHINE .................................................................. .NUT, HEX............................................................................. .WASHER, LOCK .................................................................. .CLAMP, PIPE....................................................................... .BUSHING, NONMETALLIC ................................................... .END PLATE ......................................................................... .BRACKET, DOUBLE ANGL................................................... .PLATE, CLIP RETAINER ...................................................... .PIPE, HIGH PRESSURE ....................................................... .PIPE, HIGH PRESSURE ....................................................... .PIPE, HIGH PRESSURE ....................................................... .PIPE, HIGH PRESSURE ....................................................... .PIPE, HIGH PRESSURE ....................................................... .PIPE, HIGH PRESSURE ....................................................... END OF FIGURE
13-1
6 6 6 6 2 2 2 1 7 1 1 1 1 1 1 1 1 1
TM 10-4320-315-24P C01
Figure 14. Fuel Injector and Pump
SECTION II
(1) ITEM NO
(2) SMR CODE
TM 10-4320-315-24P C01 (3) CAGEC
(4) PART NUMBER
(5) DESCRIPTION AND USABLE ON CODES (UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 14 FUEL INJECTOR AND PUMP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
XBOZZ XBOZZ XBOOO PAOZZ PAOZZ XBFOD XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ XBOZZ XBOZZ XBOZZ PBOZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111-2813 110-2797 223-9550 0126 0049 117-4706 415-1806 112-8196 110-7283 213-2685 213-9287 110-0169 223-5118 223-5117 116-6103 117-4190 110-7105 110-2659 419-1148
.NUT, HEX............................................................................. .WASHER, LOCK .................................................................. .PUMP, FUEL, CAM ACTUA .................................................. .REPAIR ASSEMBLY............................................................. .SEAL, PLAIN........................................................................ .FUEL INJECTOR PUMP ....................................................... .BOLT, MACHINE .................................................................. .WASHER, SPRING TENSI.................................................... .WASHER, PLAIN.................................................................. .GEAR .................................................................................. .NUT, PLAIN, HEXAGON ....................................................... .WASHER............................................................................. .HUB ..................................................................................... .PACKING, PREFORMED...................................................... .STUD................................................................................... .WASHER, FLAT ................................................................... .NUT, PLAIN, CONE SEAT .................................................... .FUEL SOLENOID ................................................................. END OF FIGURE
14-1
3 3 1 1 1 1 3 3 3 1 1 1 1 1 4 4 4 1
TM 10-4320-315-24P
Figure 15. Alternator
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 04 ENGINE ASSEMBLY FIG. 15 ALTERNATOR
1 2 3 4 5 6 7 8 9 10 11 12
XBOZZ XBOZZ XBOFF XBFZZ PAFZZ XBFZZ XBFZZ PAFZZ PAFZZ PAFZZ XBFZZ PAFZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
113-1115 110-3952 117-8136 132-1478 117-8336. 132-1477 130-7178 132-1483 132-1475 130-8454 132-1484 130-8397
NUT, HEXAGON .................................................. WASHER, SPRING .............................................. ALTERNATOR ..................................................... SCREW................................................................ REGULATOR, VOLTAGE..................................... SCREW................................................................ SCREW................................................................ BEARING, BALL................................................... BEARING, BALL................................................... SET OF PARTS ................................................... SCREW................................................................ CAPACITOR ........................................................ END OF FIGURE
15-1
1 1 1 1 1 1 3 1 1 1 1 1
TM 10-4320-315-24P
Figure 16. Starter Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 04 ENGINE ASSEMBLY FIG. 16 STARTER ASSEMBLY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
XBFZZ XBFZZ PAOFF XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAOZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111-2418 110-2800 117-3241 110-7602 110-2800 110-5501 132-0794 132-0251 298-5006 128-9961 130-8152 130-8147 130-8848 130-8846 130-8752 130-8811
SCREW, CAP, HEXAGON H................................ WASHER ............................................................. STARTER............................................................. NUT, HEX............................................................. WASHER ............................................................. SCREW................................................................ CLAMP................................................................. SCREW................................................................ RELAY ................................................................. BUSHING ............................................................. WASHER ASSORTMENT .................................... BUSH, BEARING ................................................. SPRING, HELICAL, COMP .................................. BRUSH, ELECTRICAL CO SET OF 4 ................. GEAR ................................................................... BUSHING ............................................................. END OF FIGURE
16-1
3 3 1 2 2 1 1 3 1 1 .1 1 1 1 1 2
TM 10-4320-315-24P
Figure 17. Turbocharger Assembly and Air Discharge Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 04 ENGINE ASSEMBLY FIG. 17 TURBOCHARGER ASSEMBLY AND AIR DISCHARGE ASSEMBLY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
XBFZZ XBFZZ XBFZZ PAFZZ XBFOD PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFHH XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
347-0246 110-7550 117-3971 117-5634 223-5352 213-7909 110-3316 110-2797 111-2813 223-2033 110-7095 415-1774 111-7869 415-8040 223-1127 111-2322 117-4764 121-6108 213-5736 213-8442 111-2232 213-5748 110-2797 213-5737 213-8417 111-2240 213-8415 223-9458 110-7095
BOLT.................................................................... 4 WASHER ............................................................. 4 CLAMP................................................................. 1 HOSE, PREFORMED........................................... 1 TURBOCHARGER ............................................... 1 GASKET............................................................... 1 BOLT, MACHINE.................................................. 4 WASHER, LOCK.................................................. 4 NUT, HEX............................................................. 4 BRACKET ............................................................ 2 WASHER, LOCK ................................................. 4 BAFFLE, AIR........................................................ 1 WASHER, LOCK.................................................. 4 ELBOW, EXHAUST.............................................. 1 GASKET............................................................... 1 SCREW, CAP, HEXAGON H................................ 6 WASHER, FLAT................................................... 6 WASHER, FLAT................................................... 12 SPACER............................................................... 6 FRAME ASSY, AIR OUTL .................................... 1 BOLT, MACHINE.................................................. 7 PLATE, COVER ................................................... 1 WASHER, LOCK.................................................. 13 COVER, TOP ....................................................... 1 PLATE, END ........................................................ 1 BOLT, MACHINE.................................................. 6 PLATE, COVER ................................................... 1 CASE BOTTOM ................................................... 1 WASHER, LOCK.................................................. 4 END OF FIGURE
17-1
TM 10-4320-315-24P
Figure 18. Intake and Exhaust Manifold
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 04 ENGINE ASSEMBLY FIG. 18 INTAKE AND EXHAUST MANIFOLD
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
241-1054 110-1492 113-6481 223-0704 117-3627 213-4064 620-8701 117-3631 110-7101 213-4712 117-7087 337-1689 213-4045 116-2449 223-8548 112-5788
NUT, PLAIN, HEXAGON ...................................... 12 WASHER, LOCK.................................................. 6 STUD ................................................................... 12 GASKET............................................................... 6 CLAMP................................................................. 2 TUBE.................................................................... 1 SCREW, PLUG .................................................... 2 SLEEVE ............................................................... 1 WASHER, FLAT................................................... 6 MANIFOLD, INTAKE ............................................ 1 STUD ................................................................... 12 GASKET............................................................... 6 PIPE, EXHAUST .................................................. 1 RING, COMPRESSION........................................ 2 MANIFOLD, EXHAUST ........................................ 1 PIPE, PLUG ......................................................... 1 END OF FIGURE
18-1
TM 10-4320-315-24P
Figure 19. Air Cowling Base Assembly (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 19. Air Cowling Base Assembly (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111 2299 110-2799 110-7101 111-0548 210-1802 213-6517 111-2240 110-7095 110-2797 111-2813 121-5850 111-2307 116-7425 415-7269 213-6438 110-3316 116-0592 336-1809 223-5846 210-1785 111-2232 223-1944 116-8140 111-2264 223-4922 223-4943 140-1420
AIR COWLING BASE ASSEMBLY
.BOLT, MACHINE........................................................... .WASHER, LOCK........................................................... .WASHER, FLAT............................................................ .SCREW, CAP, SOCKET HD ......................................... .RUBBER ....................................................................... .AIR COWLING BASE.................................................... .BOLT, MACHINE........................................................... .WASHER, LOCK........................................................... .WASHER, LOCK........................................................... .NUT, HEX...................................................................... .WASHER, FLAT............................................................ .BOLT, MACHINE........................................................... .GROMMET ................................................................... .AIR DUCT, REAR WALL ............................................... .WALL, AIR DUCT.......................................................... .BOLT, MACHINE........................................................... .GROMMET ................................................................... .GROMMET ................................................................... .STRIP ........................................................................... .DUCT, AIR COOL FEED ............................................... .BOLT, MACHINE........................................................... .BAFFLE, COOLING AIR................................................ .CLAMP.......................................................................... .BOLT, MACHINE........................................................... .AIR FEED...................................................................... .BUSHING, SEAL ........................................................... .SECTION, SEALING ..................................................... END OF FIGURE
19-1
6 29 5 2 1 1 2 1 2 1 1 1 1 1 1 12 3 2 1 1 4 1 3 4 1 1 1
TM 10-4320-315-24P
Figure 20. Flywheel Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
110-4935 224-0193 213-1081 111-0664 110-2800 111-2429 111-2295 110-2799 210-2313 116-6951 121-6128 223-8623 111-2232 110-2797 336-4077 110-1428 111-2858 110-3790 224-6170 216-3210
FLYWHEEL ASSEMBLY
.BOLT, HEX.................................................................... .FLYWHEEL................................................................... .RING, GEAR ................................................................. .SCREW, CAP, SOCKET HD ......................................... .WASHER ...................................................................... .SCREW, CAP, HEXAGON H......................................... .SCREW, CAP, HEXAGON H......................................... .WASHER, LOCK........................................................... .COVER ......................................................................... .BOLT, HEX.................................................................... .WASHER, FLAT............................................................ .PULLEY, GROOVED..................................................... .BOLT, MACHINE........................................................... .WASHER, LOCK........................................................... .PLATE, COVER ............................................................ .SCREW......................................................................... .NUT, HEX...................................................................... .SCREW......................................................................... .MOUNTING, FOOT....................................................... .BEAM, CROSS ............................................................. END OF FIGURE
20-1
10 1 1 1 10 9 4 4 1 1 1 1 3 3 1 6 4 2 4 1
TM 10-4320-315-24P
Figure 21. Cylinder Head Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
XBOZZ PAOZZ XBOZZ XBOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBFFF XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ PAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBFZZ XBFZZ XBFHH XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111-2341 121-6307 110-7101 223-4784 337-1692 112-4753 111-2824 415-2750 110-7731 121-6105 415-2795 111-3148 111-2813 337-1845 223-6578 336-5861 223-2840 415-2877 337-1887 337-1876 337-1885 337-1888 210-1681 337-1666 415-2627 110-2659 213-7591 111-0259 213-7580 116-8817 337-1748 336-9305 213-1029 121-5500 213-7096 223-2528 213-7306 213-7302 415-3697 415-3631 213-6596 111-8760 223-0216
CYLINDER HEAD ASSEMBLY
.SCREW, CAP, SOCKET HE ......................................... .WASHER, SPRING TENSI............................................ .WASHER, FLAT............................................................ .COVER, VALVE ............................................................ .GASKET........................................................................ .STUD, PLAIN ................................................................ .NUT, PLAIN, HEXAGON ............................................... .BRACKET ..................................................................... .CLIP .............................................................................. .WASHER, FLAT............................................................ .ROCKER ARM ASSY.................................................... ..NUT, HEX..................................................................... ..NUT, HEX..................................................................... ..NOZZLE ....................................................................... ..PAD, THRUST ............................................................. ..SCREW, ADJUSTING.................................................. .WASHER, FLAT............................................................ .PUSH ROD ................................................................... .CAP............................................................................... .SPRING, HELICAL, COMP ........................................... .VALVE TAPPET............................................................ .TUBE ............................................................................ .BOLT, HEX.................................................................... .WASHER ...................................................................... .CYLINDER HEAD ASSY ............................................... ..NUT, PLAIN, CONE SEAT ........................................... ..ROCKER ARM, ENGINE P .......................................... ..STUD, PLAIN ............................................................... ..PIN, STRAIGHT, HEADED........................................... ..LOCK, VALVE SPRING R ............................................ ..SEAT, VALVE .............................................................. ..SPRING ....................................................................... ..RETAINER, HELICAL CO ............................................ ..RING, RETAINING ....................................................... ..SPRING CAP ............................................................... ..GUIDE, VALVE STEM.................................................. ..INSERT, ENGINE VALVE ............................................ ..INSERT, ENGINE VALVE ............................................ ..VALVE, EXHAUST ....................................................... ..VALVE, INLET.............................................................. ..PLUG, SCREW ............................................................ ..RING, SEAL ................................................................. ..SPACER RING............................................................. END OF FIGURE
21-1
6 6 1 6 6 18 18 6 12 12 2 2 2 1 1 1 4 2 2 2 2 2 4 4 1 1 1 1 1 4 2 2 11 2 1 2 1 1 1 1 2 2 1
TM 10-4320-315-24P
Figure 22. Cylinder and Piston
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 22 1 2 2 2 2 3 4 5 6
XBHHZ XBHZZ XBHZZ XBHZZ XBHZZ XBHHH XBHZZ XBHZZ XBHZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445
415-7756 415-4891 223-2963 415-0264 223-9331 150-07-504-2761 110-7821 337-1660 415-4893
CYLINDER AND PISTON
.CYLINDER HEAD, DIESE ............................................. ..SHIM ............................................................................ ..SHIM ........................................................................... ..SHIM ............................................................................ ..SHIM ............................................................................ .PISTON ASSY .............................................................. ..RING, RETAINING ....................................................... ..PIN, PISTON................................................................ ..RING SET, PISTON ..................................................... END OF FIGURE
22-1
6 1 3 1 1 1 2 1 11
TM 10-4320-315-24P
Figure 23. Oil Pan Assembly and Suction Tube Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ PAHZZ XBHZZ XBHZZ XBOZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111-0573 110-7548 121-6151 110-2193 336-2601 336-2581 223-0761 415-7240 117-8319 111 2299 213-9771 110-3316 111-2813 111-7861 213-4631 121-0230 121-0231
OIL PAN ASSEMBLY AND SUCTION TUBE ASSEMBLY
.SCREW......................................................................... .WASHER, FLAT............................................................ .BUSHING...................................................................... .SCREW......................................................................... .OIL PAN ........................................................................ .GASKET........................................................................ .BAFFLE, INTERMEDIATE ............................................ .GASKET........................................................................ .DIPSTICK, OIL .............................................................. .BOLT, MACHINE........................................................... .PIPE, SUCTION ............................................................ .BOLT, MACHINE........................................................... .NUT, HEX...................................................................... .WASHER, TOOTH ........................................................ .CLAMP.......................................................................... .UNION........................................................................... .RING, DUPLEX ............................................................. END OF FIGURE
23-1
1 1 1 26 1 1 1 1 1 2 1 2 2 2 2 1 1
TM 10-4320-315-24P
Figure 24. Connecting Rod Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 24 1 2 3 4 5
XBHZH XBHZZ XBHZZ XBHZZ XBHZZ
62445 62445 62445 62445 62445
415-0450 213-7750 337-1587 337-1612 223-5520
CONNECTING ROD ASSEMBLY
.CONNECTING ROD, PIST............................................ .BEARING, END............................................................. ..PIN ............................................................................... ..BUSHING, SLEEVE ..................................................... ..BOLT, HEX................................................................... END OF FIGURE
24-1
1 1 1 1 2
TM 10-4320-315-24P
Figure 25. Front Cover Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBOZZ XBOZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111-1336 110-2800 112-2399 110-2799 110-2298 112-7679 110-7556 111-1168 110-7101 111-1179 111-2295 116-6110 223-4133 415-8421 123-6291 123-6290
FRONT COVER ASSEMBLY
.BOLT, HEX.................................................................... .WASHER ...................................................................... .BOLT, HEX.................................................................... .WASHER, LOCK........................................................... .SCREW......................................................................... .WASHER, LOCK........................................................... .WASHER, FLAT............................................................ .BOLT, HEX.................................................................... .WASHER, FLAT............................................................ .BOLT, HEX.................................................................... .SCREW, CAP, HEXAGON H......................................... .PACKING, PREFORMED.............................................. .SEAL, PLAIN ENCASED ............................................... .COVER, FRONT ........................................................... .COVER ......................................................................... .SPACER, RING............................................................. END OF FIGURE
25-1
1 1 1 1 4 4 4 1 3 1 1 1 1 1 1 1
TM 10-4320-315-24P
Figure 26. Oil Pump Assembly and Oil Pump Discharge Pipe
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 26
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBOZZ XBOZZ XBOZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111-0606 111-9610 117-2303 223-8751 415-8341 223-7494 117-4605 223-9984 111-0577 110-7548 415-3159 117-3962 415-3069 117-5630 223-3056 111-0664 110-2800 0418-2520
OIL PUMP ASSEMBLY AND OIL PUMP DISCHARGE PIPE
.SCREW, CAP, SOCKET HD ......................................... .WASHER, LOCK........................................................... .WASHER, FLAT............................................................ .BAFFLE, AIR................................................................. .PUMP, LUBE OIL .......................................................... .SPRING, YOKE............................................................. .SEAL............................................................................. .OIL PIPE ....................................................................... .SCREW......................................................................... .WASHER, FLAT............................................................ .GASKET........................................................................ .CLAMP, HOSE.............................................................. .RETURN PIPE, OIL....................................................... .SLEEVE, RUBBER........................................................ .COVER ......................................................................... .SCREW, CAP, SOCKET HD ......................................... .WASHER ...................................................................... .GASKET........................................................................ END OF FIGURE
26-1
2 1 2 1 1 1 2 1 2 2 1 2 1 1 1 3 3 1
TM 10-4320-315-24P
Figure 27. Crankcase Assembly and Crankshaft Assembly
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 04 ENGINE ASSEMBLY FIG. 27 CRANKCASE ASSEMBLY AND CRANKSHAFT ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ XBHZZ
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62443 62445 62445 62445 62445
111-2322 110-7101 223-4870 336-2337 415-2349 415-6058 121-6107 416-0764 336-2379 111-0422 111-8673 121-5235 213-9737 116-7266 121-4987 111-8727 121-6240 111-8998 111-8659 223-0181 223-0170 415-6225 113-7280 121-6119 223-1747 113-7239 415-6890 117-0580 116-7010 111-5464 415-1011 210-1224 336--7789
.SCREW, CAP, HEXAGON H......................................... .WASHER, FLAT............................................................ .COVER, REAR.............................................................. .GASKET........................................................................ .SEAL............................................................................. .SCREW, HEX................................................................ .WASHER ...................................................................... .BUSHING...................................................................... .BEARING, SLEEVE ...................................................... .PLUG, MACHINE THREAD........................................... .GASKET........................................................................ .PLUG ............................................................................ .BUSHING...................................................................... .BUSHING...................................................................... .PLUG, SCREW ............................................................. .RING, SEALING............................................................ .PLUG ............................................................................ .PLUG, MACHINE THREAD........................................... .RING, SEAL .................................................................. .RING, STOP ................................................................. .RING, STOP ................................................................. .CRANKCASE ................................................................ ..SCREW ....................................................................... ..WASHER, FLAT........................................................... ..WEIGHT, BALANCE .................................................... ..PIN .............................................................................. ..GEAR........................................................................... ..PLUG, EXPANSION ..................................................... ..WASHER ..................................................................... ..PIN ............................................................................... .CRANKSHAFT ASSY.................................................... ..CAMSHAFT.................................................................. ..BEARING, WASHER, THRU........................................ END OF FIGURE
27-1
8 8 1 1 1 14 14 14 7 6 6 7 1 2 2 2 1 5 5 1 1 1 12 12 6 1 1 1 1 1 1 1 1
TM 10-4320-315-24P
Figure 28. Pump Assembly (Sheet 1 of 2)
TM 4320-315-24P
Figure 28. Pump Assembly (Sheet 2 of 2)
SECTION II (1) (2) ITEM SMR NO CODE
(3) CAGEC
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC)
(6) QTY
GROUP 05 PUMP ASSEMBLY FIG. 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
PAHZZ PAHZZ XBOZZ PAOZZ PAHZZ PAOZZ PAOZZ XBOZZ XBFZZ PAFZZ PAFZZ PAFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAOZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ PAFZZ PAFZZ PAFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ
96906 96906 2X949 96906 96906 96906 96906 88044 62503 96906 96906 80204 62503 62503 96906 62503 96046 96046 96046 96046 96046 96906 96046 96046 96046 62503 62503 62503 96906 62503 62503 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046
MS90725-168 MS35338-50 5032 NS27183-17 MS51967-20 NS35934-2 MS14304-lC04 AN911-2 D-9016 MS51967-23 MS35338-51 B1821BH07SC300N D-9016-3 D-9016-4 MS51864-109-30 D-9016-2 85365CA 85386 03222 02466 77461 MS27022-9 77222 77686 77244 38-1-1/2-2.5 LTH 39-1-1/2-EL 37-1-1/2-20 LTH MS51953-171 NPSM-200 MI/D 34-2-12 LTH 78994 21076 21077 75514 75399 75532 76161 76188 13301 75506 76189 75501 76190 05254 60646 29863
PUMP ASSEMBLY
SCREW, CAP, HEXAGON H.......................................... WASHER, LOCK............................................................ ISOLATOR, T-MOUNT................................................... WASHER, FLAT............................................................. NUT, PLAIN, HEXAGON ................................................ COCK, SHUTOFF, SCREW ........................................... COUPLING, PIPE........................................................... NIPPLE, PIPE ................................................................ PUMP ASSEMBLY......................................................... .NUT, PLAIN, HEXAGON ............................................... .WASHER, LOCK........................................................... .SCREW, CAP, HEXAGON H......................................... NIPPLE, SUCTION......................................................... ELBOW, FLANGED ....................................................... STUD ............................................................................. .ELBOW ......................................................................... .PUMP............................................................................ ..PUMP BODY................................................................ ..PLUG, PIPE ................................................................. ..STUD, PLAIN ............................................................... ..DUST CAP CHAIN INCLUDED..................................... ..COUPLING HALF, QUICK............................................ ..BODY, VALVE.............................................................. ..PIN, SPRING................................................................ ..BALL, BEARING........................................................... ..PRIMING LINE, SHORT............................................... ..ELBOW ........................................................................ ..PRIMING LINE, LONG ................................................. ..NIPPLE, PIPE .............................................................. ..CAP INCLUDES CHAIN .............................................. ..DRAIN PIPE ................................................................. ..PIN ............................................................................... ..NUT, PLAIN, HEXAGON .............................................. ..WASHER, LOCK.......................................................... ..BEARING HOUSING.................................................... ..GASKET....................................................................... ..RING, WEARING ......................................................... ..IMPELLER, PUMP, CENTR ......................................... ..RING, RETAINING ....................................................... ..SEAL ASSEMBLY ........................................................ ..SEAL, PLAIN................................................................ ..PACKING, PREFORMED............................................. ..SLEEVE, SHAFT, PUMP.............................................. ..PACKING, PREFORMED............................................. ..DEFLECTOR, DIRT AND ............................................. ..KEY, WOODRUFF ....................................................... ..RING, RETAINING .......................................................
28-1
2 2 2 2 2 1 1 2 1 32 32 16 1 2 16 1 1 1 2 12 1 1 1 1 1 1 2 1 1 1 1 2 12 12 1 1 1 1 1 1 1 1 1 1 1 1 1
SECTION II (1) (2) ITEM SMR NO CODE 48 49 50 51 52
XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ
(3) CAGEC 96046 96046 96046 96046 75665
TM10-4320-315-24P (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) 23810 75392 76187 76186 CF50-01S CPLG
..RING, RETAINING ....................................................... ..SHAFT, SHOULDERED ............................................... ..SEAL, PLAIN................................................................ ..BEARING, BALL, ANNULA .......................................... COUPLING,ELASTOMERI INCL 4 TRQ CONV BOLTS, SKT HD CAP SCREW ........................... END OF FIGURE
28-2
(6) QTY 2 1 1 2
TM 10-4320-315-24P
Figure 29. Trailer Assembly (Sheet 1 of 3)
TM 10-4320-315-24P
Figure 29. Trailer Assembly (Sheet 2 of 3)
TM 10-4320-315-24P
Figure 29. Trailer Assembly (Sheet 3 of 3)
SECTION II (1) (2) (3) ITEM SMR NO CODE CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY GROUP 06 TRAILER ASSEMBLY FIG. 29 TRAILER ASSEMBLY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
XBOFF XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XAFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ XBFZZ PAOZZ XBOZZ PAOZZ PAOZZ PAOZZ XBFZZ PAFZZ PAOZZ PAOZZ XBFZZ XBFZZ XBFZZ XBFZZ XBOZZ XBOZZ PAFZZ PAFZZ PAFZZ
62503 D-9022-A 94189 40932 94189 8152 94189 17773 94189 8291 94189 7997 94189 17772 94189 12426 94189 24801 94189 17815 94189 12098 94189 17556 94189 10271 94189 18066 94189 7976 94189 7820 94189 10274 94189 10273 94189 43905 94189 17762 94189 18619 94189 17763 94189 18316 94189 17766 94189 17767 94189 10555 94189 17803 94189 43593 94189 0209 OG2R6 03ST135-3MIXEE 96906 MS24662-21 62503 D-9021-7 96906 MS51971-4 96906 MS35340-47 96906 MS35307-387 79470 HK0709 96906 MS90725-8 96906 MS35340-44 96906 MS51971-1 62503 D13WMO3 62503 02B114-3F13MIX 62503 03ST72-3MIXEE 62503 02B114-3FIEEMC 39428 9600K21 62503 D-9021-6 96906 MS90725-60 96906 MS35338-46 96906 MS51967-8
TRAILER ASSEMBLY .......................................... .COUPLER ........................................................... ..PIN,COTTER...................................................... ..PIN,TRANSPORTER.......................................... ..ROLLER,LINEAR-ROTAR .................................. ..PIN,COTTER...................................................... ..PIN,DAMPER TRANSP ...................................... ..DAMPER,INERTIA ............................................. ..CASE ASSEMBLY.............................................. ..BOLT,MACHINE................................................. ..CONNECTOR .................................................... ..CAP,MASTER CYLINDER.................................. ..CYLINDER ASSEMBLY ..................................... ..COVER .............................................................. ..NUT.................................................................... ..WASHER,TRANSPORTER ................................ ..SPRING,TRANSPORTER .................................. ..BOLT,MACHINE................................................. ..ROD ASSEMBLY ............................................... ..PLATE,MOUNTING............................................ ..WASHER,FLAT.................................................. ..ROLLER ASSEMBLY. ........................................ ..WASHER ........................................................... ..PIN,FRONT ROLLER ......................................... ..COVER,FRONT ROLLER .................................. ..HOOK,CHAIN,S ................................................. ..SPRING,BREAKAWAY ...................................... ..BREAKAWAY LVR WIPIN ................................. ..BEARING,ACTUATOR....................................... .TUBE ASSEMBLY,BRAKE.................................. .RIVET.................................................................. .IDENT PLATE,FLUID .......................................... .NUT,PLAIN,HEXAGON ....................................... .WASHER,LOCK.................................................. .SCREW,CAP,HEXAGON H................................. .CLAMP................................................................ .SCREW,CAP,SLOTTED ..................................... .WASHER.LOCK.................................................. .NUT,PLAIN,HEXAGON ....................................... .TEE,BRAKE ........................................................ .HOSE ASSEMBLY .............................................. .TUBE ASSEMBLY,BRAKE.................................. .HOSE ASSEMBLY .............................................. .GROMMET.......................................................... .PLACARD,PRKG BRAKE.................................... .SCREW,CAP,HEXAGON H................................. .WASHER,LOCK.................................................. .NUT,PLAIN,HEXAGON .......................................
29-1
1 1 1 1 2 2 1 1 1 4 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 2 1 4 1 5 5 5 5 1 1 1 1 2 1 1 1 1 3 3 3
SECTION II (1) (2) (3) ITEM SMR NO CODE CAGEC
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
XBFZZ XBOZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ
62503 94189 94189 94189 94189 94189 94189 94189 94189 96906 96906 96906 96906 96906 39428
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY
D-9015-1 23852 7769 8540 7820 7770 9536 9537 23855 MS35307-332 MS27183-54 MS35307-334 MS35340-45 MS51971-2 3254T4
.BRAKE,PARKING ............................................... ..CABLE HANDLE,BRAKE.................................... ..CABLE,FRONT .................................................. ..NUT.................................................................... ..WASHER,TRANSPORTER ................................ ..SPRING ............................................................. ..CLAMP............................................................... ..LINK ................................................................... ..CABLE,REAR..................................................... .BOLT,MACHINE.................................................. .WASHER,FLAT................................................... .BOLT,MACHINE.................................................. .WASHER,LOCK.................................................. .NUT,PLAIN,HEXAGON ....................................... .CLIP .................................................................... END OF FIGURE
29-2
1 1 1 2 2 1 2 2 1 4 4 2 2 2 2
TM 10-4320-315-24P
Figure 30. Tail Light, Wiring Harness, and Jack Assembly
SECTION II (1) (2) (3) ITEM SMR NO CODE CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY GROUP 06 TRAILER ASSEMBLY FIG. 30 TAIL LIGHT, WIRING HARNESS, AND JACK ASSEMBLY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
PAFZZ PAFZZ XBFZZ PAFZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ PAOZZ XBOZZ PAFZA XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ PAFZZ PAFZZ XBFZZ XBFZZ PAOZZ XBFZZ XBFZZ PAOZZ XBOZZ
96906 96906 62503 96906 08108 08108 08108 96906 96906 96906 39428 96906 62503 62503 62503 62503 62503 62503 62503 62503 96906 96906 96906 62503 62503 96906 62503 62503 96906 62503
MS90725-69 MS35338-45 D-9010-2 MS52125-1 AML-623 M-1683 ML-1251 MS51971-2 MS35338-26 MS35307-336 9434T19 MS75020-1 D-9007 D-9007-2 37-02106 P9814 P9812-01 D-9008 37-02110-1 37-02116-2 MS90725-58 MS35338-46 MS51967-8 37-02114-9 D-9008-2 MS35307-334 D-9008-4 D-9008-3 MS24662-21 D-9021-7
.SCREW,CAP,HEXAGON H................................. .WASHER,LOCK.................................................. .BRACKET,TAIL LIGHT........................................ .STOP LIGHT-TAIL LT ......................................... ..BULB.................................................................. ..BULB.................................................................. ..BULB.................................................................. .NUT,PLAIN,HEXAGON ....................................... .WASHER,LOCK.................................................. .BOLT,MACHINE.................................................. .CLIP .................................................................... ..CONNECTOR,PLUG,ELEC................................ .JACK ASSEMBLY ............................................... ..FOOT,JACK ....................................................... ..JACK,REAR ....................................................... ... BRACKET,MOUNTING .................................... ... PIN AND CHAIN............................................... .JACK ASSY,FRONT............................................ ..FRONT JACK..................................................... ..PLATE,SWIVEL ................................................. ..BOLT.................................................................. ..WASHER,LOCK................................................. ..NUT,PLAIN,HEXAGON ...................................... ..RING,RETAINING .............................................. ..FOOT,SUPPORT ............................................... ..BOLT,MACHINE................................................. ..BRACKET .......................................................... ..BRACKET .......................................................... ..RIVET................................................................. ..IDENT PLATE,FLUID ......................................... END OF FIGURE
30-1
4 4 2 2 1 1 2 2 2 2 2 2 2 2 2 2 2 1 1 1 5 9 9 1 1 4 1 2 4 1
TM 10-4320-315-24P
Figure 31. Reflector Axle Assembly and Spring and Suspension Kit (Sheet 1 of 2)
TM 10-4320-315-24P
Figure 31. Reflector Axle Assembly and Spring and Suspension Kit (Sheet 2 of 2)
SECTION II (1) (2) (3) ITEM SMR NO CODE CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY GROUP 06 TRAILER ASSEMBLY FIG. 31 REFLECTOR AXLE ASSEMBLY AND SPRING AND SUSPENSION KIT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
PAOZZ XBOZZ XBOFF XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XAOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ
96906 39428 62503 15460 15460 3D536 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460
MS24662-21 5827T15 D-9020-10 21-42-1 85-1 8516 6-1 5-23 31-32-2 31-32-1 174-5 46-101 46-107-1 46-77 6-11-1 7-210 40-218-1 40-218-2 40-243-2 49-2 49-12 46-102 43-4 47-109 37-69-01 40-244-01 5-64 46-108-1 54-65 54-64 54-60 87-1 5-112 47-111-1
35 XBOZZ
15460 47-110-1
36 37 38 39 40 41 42 43 44 45
15460 15460 15460 15460 15460 15460 15460 15460 15460 96906
XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XBOZZ XAOZZ PAOZZ XBOZZ PAOZZ
69-55 6-10 5-4 46-7 36-93-3 31-30-2 31-30-1 10-10 017-048-00 MS51473-02
.RIVET.................................................................. .REFLECTOR,YELLOW ....................................... .AXLE ASSEMBLY ............................................... ..CAP,GREASE .................................................... ..PIUGPRUBBER ................................................. ..PIN,COTTER...................................................... ..NUT.................................................................... ..WASHER,SPINDLE ........................................... ..CONE,OUTER BEARING................................... ..CUP,OUTER BEARING...................................... ..WHEEL HUB AND DRUM .................................. ..SPRING,RETRACTOR....................................... SPRING,SHOE LVR RTN..................................... ..SPRING,SHOE HLDN ........................................ ..LOCKNUT .......................................................... ..SCREW.............................................................. ..RH SECONDARY S&L ...................................... ..LH SECONDARY S&L........................................ ..PRIMARY S&L .................................................. ..PIN,SHOE HOLD DOWN .................................. ..PIN,SHOE HOLDDOWN .................................... ..SPRING,ADJ SCREW........................................ ..ADJUSTER ASSEMBLY..................................... ..PARKING STRUT .............................................. ..TRAVEL LINK..................................................... ..SHOE LEVER..................................................... ..WASHER ........................................................... ..SPRING,PRI SHOE RTN.................................... ..UNI-SERVO,BRAKE RH..................................... ..UNI-SERVO,BRAKE LH ..................................... ..PUSH ROD ........................................................ ..SEMS ................................................................. ..WASHER,SPRING TNSN .................................. ..PARKING LEVER & PIN RIGHT HAND............. SIDE..................................................................... .. PARKING LEVER & PIN LEFT HAND .............. SIDE..................................................................... ..RETAINER ......................................................... ..NUT,BRAKE MOUNTING................................... ..SCREW,CAP,HEX HEAD................................... ..PLU .................................................................... ..BACKING PLATE ASSY..................................... ..CONE,INNER BEARING .................................... ..CUP,INNER BEARING ....................................... ..SEAL,GREASE .................................................. ..RIM,WHEEL 14.5 X 7 ........................................ ..NUT....................................................................
31-1
2 4 1 1 1 2 1 1 1 1 1 2 2 4 2 2 2 2 2 2 2 1 1 1 2 2 2 2 1 1 1 2 1 1 1 1 5 5 1 1 1 1 1 2 5
SECTION II (1) (2) (3) ITEM SMR NO CODE CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY
46 XBOZZ 15460 15-12 47 PAOZZ 62503 D-9020-12 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
PAOZZ XBFFF XBFZZ XBFZZ XBFZZ XBFZZ XBFZZ PAFZZ XBFZZ XBFZZ PAFZZ PAFZZ PAFZZ XBFZZ PAOZZ
62503 62503 62503 62503 62503 62503 62503 96906 62503 OR9V4 96906 96906 96906 76445 96906
D-9020-100 D-9020-11 4123 14065 14422 14160 9138 MS51971-8 14595 UNA-111 MS51095-420 MS35338-48 MS51967-14 32233 MS15003-3
..CLAMP............................................................... ..TIRE 9-14.5LT LOAD RANGE F........................ BLACKWALL NYLON CORD. TUBE.................................................................... .SUSPENSION SPRG AY .................................... ..NUT.................................................................... ..BOLT.................................................................. ..LINK ................................................................... ..HANGER,REAR ................................................. ..U-BOLT .............................................................. ..NUT,PLAIN,HEXAGON ...................................... ..PLATE................................................................ ..SPRING,DOUBLE EYE ...................................... .SCREW,CAP,HEXAGON H................................. WASHER,LOCK................................................... NUT...................................................................... .SHOCK ABSORBER ........................................... .FITTING,LUBRICATION...................................... END OF FIGURE
31-2
5 2 2 2 6 6 4 2 2 4 1 2 4 4 4 2 2
TM 10-4320-315-24P
Figure 32. Battery Box and Chassis
SECTION II (1) (2) (3) ITEM SMR NO CODE CAGEC
TM10-4320-315-24P (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY GROUP 06 TRAILER ASSEMBLY FIG. 32 BATTERY BOX AND CHASSIS
1 2 3 4 5 6
PAOZZ PAOZZ PAOZZ XBOZZ XBOZZ XBOZZ
96906 96906 96906 62503 80535 80535
MS90725-60 MS35338-46 MS51967-8 D-9015-2 450-0505 072-6227
..SCREW,CAP,HEXAGON H................................ ..WASHER,LOCK................................................. ..NUT,PLAIN,HEXAGON ...................................... ..BATTERY BOX .................................................. .HOOK,CLEVIS GRAB ......................................... .CHAIN,HIGH TEST ............................................. END OF FIGURE
32-1
2 2 2 1 2 2
TM 10-4320-315-24P
SECTION III. SPECIAL TOOLS LIST Not Applicable
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES
STOCK NUMBER 5305-00-021-3620 5935-00-059-2841 5305-00-068-0502 5305-00-068-0510 5305-00-071-2513 5310-00-080-6004 5310-00-087-4652 5310-00-088-1251 5340-00-088-6655 2910-00-141-9758 6240-00-155-7836 5305-00-165-8074 4730-00-172-0025 5310-00-187-2427 4730-00-187-7568 4730-00-196-1509 5305-00-207-8253 5305-00-225-3839 5305-00-263-7536 5305-00-269-3211
5305-00-269-3219 4730-00-360-0589 5310-00-407-9566 2910-00-470-1241 6210-00-542-6393 5305-00-543-2419 5306-00-543-4405 5310-00-543-5101 5305-00-576-5417 5310-00-582-5965
5310-00-584-7888 5305-00-632-2777 5310-00-637-9541
FIG.
ITEM
2 30 6 8 4 5 7 7 7 9 7 31 31 6 28 28 8 7 29 7 9 29 32 30 28 30 10 7 7 29 30 7 7 1 2 3 4 5 6 7 8 28 10 5 7 8 9 29 30 32
14 12 8 1 3 16 58 74 24 2 6 58 62 2 7 29 19 39 37 66 5 46 1 1 22 2 32 5 1 60 26 57 59 3 2 5 2 22 9 40 6 11 35 18 2 11 6 47 22 2
NATIONAL STOCK NUMBER INDEX STOCK NUMBER 5306-00-637-9674 5306-00-637-9675 2910-00-646-9727 5305-00-655-6974 5310-00-655-9370 5310-00-682-5930 5930-00-683-1629 5330-00-684-7851 5305-00-721-8010 5305-00-724-5914 5310-00-732-0558
5310-00-761-6882 5310-00-763-8920 5310-00-763-8921 5310-00-764-6609 5310-00-767-0445
5310-00-809-4058 5310-00-809-5997 5310-00-820-6653 5930-00-852-2407 4820-00-865-6946 5305-00-889-2910 2910-00-893-2592 5310-00-903-5966
5930-00-906-3477 5310-00-913-8881 5310-00-914-6028 5310-00-924-5897 5305-00-943-2092 5305-00-947-4354 5310-00-959-1488 5310-00-959-4679 5310-00-965-1800 5310-00-984-7042 5305-00-984-7343 5310-00-997-1888
I-1
FIG.
ITEM
30 29 8 8 29 7 29 7 9 7 28 7 9 29 30 32 6 28 28 10 7 29 30 3 4 28 10 28 7 28 29 9 2 7 8 29 7 7 8 7 31 10 28 7 29 29 7 7 3 4
10 58 14 5 34 73 38 35 3 72 1 3 7 48 23 3 10 5 10 4 50 62 8 22 4 4 2 2 36 6 35 1 10 41 7 39 34 61 12 63 55 1 12 65 61 33 60 46 6 5
SECTION IV
TM10-4320-315-24P CROSS-REFERENCE INDEXES
STOCK NUMBER 5310-00-997-1888 5330-01-005-6638 5330-01-012-8860 5330-01-014-0198 6625-01-086-9580 5330-01-109-9915 5310-01-149-3703 5310-01-166-5857 2910-01-174-1334 5977-01-184-9153 5945-01-187-2074 5330-01-188-0852 5310-01-190-7468 4330-01-204-3285 5330-01-209-7032 2920-01-211-6691 2940-01-217-4967 3120-01-239-2562 5910-01-250-7745 5330-01-273-7451 5330-01-273-7454 4720-01-273-7544 5330-01-275-7940 5330-01-275-7941 5330-01-275-7942 5330-01-275-7943 5330-01-278-6914 3030-01-281-8802 5310-01-308-8205 5330-01-343-2648 5330-01-343-2670 5365-01-367-6648
FIG.
ITEM
5 28 18 17 7 21 21 10 13 16 16 14 21 10 23 16 11 13 15 11 17 17 28 28 28 28 11 10 2 14 11 13
23 40 12 6 18 5 2 24 1 14 9 14 17 33 6 3 13 3 12 2 15 4 50 41 42 44 27 6 11 5 15 2
NATIONAL STOCK NUMBER INDEX STOCK NUMBER
I-2
FIG.
ITEM
SECTION IV
TM10-4320-315-24P CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
08108 88044 88044 88044 12623 02570 02570 02570 02570 02570 02570 62445 80204 80204 80204 80204 75665 81518
AML-623 AN735-48 AN735-64 AN911-2 B-L62TF4 B-400-1-4 B-400-11-4 B-400-3 B-400-3-4TMT B-400-8-4 B-401-PC BF6L912B B1821BH025C250N B1821BHO38ClOON B1821BH038C113N B1821BH07SC30ON CF5O-OIS CPLG CWGS-4.5 ID X 14 4 IN LG D-9007 D-9007-2 D-9008 D-9008-2 D-9008-3 D-9008-4 D-9010-2 D-9010-3 D-9015-1 D-9015-2 D-9015-3 D-9015-4 D-9016 D-9016-2 D-9016-3 D-9016-4 D-9020-10 D-9020-100 D-9020-102 D-9020-106 D-9020-11 D-9020-12 D-9020-20 D-9020-200 D-9020-22 D-9020-23 D-9020-24 D-9020-25 D-9020-26 D-9020-27 D-9021-1 D-9021-10
62503 62503 62503 62503 62503 62503 62503 96906 62503 62503 6250S3 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503 62503
PART NUMBER INDEX STOCK NUMBER
5305-00-071-2513 5305-00-068-0510 5305-00-543-2419 5305-00-947-4354
I-3
FIG.
ITEM
30 9 9 28 7 7 7 7 7 7 7 10 4 8 7 28 28 1
5 11 10 8 31 22 32 27 29 23 28 5 3 1 1 12 52 8
30 30 30 30 30 30 30 7 29 32 8 8 28 28 28 28 31 31 7 8 31 31 8 10 6 6 6 6 6 6 4 7
13 14 18 25 28 27 3 62 49 4 9 2 9 16 13 14 3 48 77 32 49 47 3 37 5 6 7 3 4 11 7 8
SECTION IV
TM10-4320-315-24P CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
62503 62503 62503
D-9021-11 D-9021-12 D-9021-13
62503 62503 62503 62503 62503 62503 62503 62503 62503
D-9021-14 D-9021-15 D-9021-16 D-9021-2 D-9021-3 D-9021-4 D-9021-5 D-9021-6 D-9021-7
62503 62503 05624
62503 4P812 78388 05824 18265 98003 98003
D-9021-8 D-9022-A DYNC11220-300-024 DYNK-207 DYNK-208 DYNK-209 DYN110807-000-024 DYN240027-000-024 D13WMO3 E-1000-F2-352 EPS-1-04 E19-283 FHGO9-0022 HA946LS-1-RG HC209ZE
79470 77342 78280 08108 81348 81348 08108 08108 96906 96906 96906 96906 96906 96906 96906
HK0709 KUHP-5DT1-24 LP535 M-1683 MIL-P-5304A MIL-P-53054A ML-1251 ML313 MS14304-lC04 MS14304-2J04 MS15003-3 MS18212-17 MS21333-101 MS24243-10604 MS24243/10604
05624 05624 05624 05624 05624
PART NUMBER INDEX STOCK NUMBER
2910-00-646-9727
4730-00-187-7568 4730-00-172-0025 5340-00-088-6655
I-4
FIG.
ITEM
1 5 3 3 1 1 1 1 4 7 9 29 29 30 4 29 7
11 15 8 13 12 14 13 10 22 76 27 45 32 30 12 1 67
7 7 8 7
53 55 15 51
7
47
29 7 7 7 9 2 2 3 4 29 7 8 30 3 4 30 7 28 8 31 7 7 7 1 2 3
40 37 54 44 13 7 8 17 16 36 68 14 6 18 11 7 43 7 4 62 69 24 7 5 4 1
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
96906
MS24243/10604
96906 96906 96906 96906 96906 96906
MS24523-23 MS24532-2 REV G MS24629-2 MS24659-23D MS24661-25 MS24662-21
96906 96906 96906 96906
MS25041-2 MS25237-327 MS27022-9 MS27183-10
96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906
MS27183-13 MS27183-14 MS27183-17 MS27183-48 MS27183-54 MS27183-56 MS27407-2 MS3112E16-8P MS3112E18-l1P MS3470W20-16P MS35191-276 MS35297-12 MS35297-6
96906 96906 96906 96906 96906 96906 96906
MS35297-64 MS35307-307 MS35307-308 MS35307-314 MS35307-315 MS35307-332 MS35307-334
96906 96906 96906 96906 96906 96906 96906
MS35307-336 MS35307-350 MS35307-358 MS35307-360 MS35307-387 MS35307-468 MS35309-368
STOCK NUMBER
5930-00-683-1629 6625-01-086-9580 5930-00-852-2407
6210-00-542-6393 6240-00-155-7836 4730-00-360-0589 5310-00-809-4058
5310-00-080-6004 5310-00-809-5997 5310-01-308-8205
5930-00-906-3477
5305-00-984-7343
5305-00-021-3620 5305-00-207-8253 5305-00-721-8010 5305-00-655-6974 5306-00-637-9675 5306-00-543-4405 5306-00-637-9674 5305-00-632-2777 5305-00-576-5417 5305-00-889-2910 5305-00-943-2092 5305-00-263-7536 I-5
FIG.
ITEM
4 5 7 7 9 7 7 1 2 3 3 9 29 30 31 7 7 28 3 4 10 5 28 2 29 7 7 7 7 7 7 5 1 2 3 4 5 2 8 7 8 29 29 30 30 8 10 7 29 10 7
6 1 35 18 4 36 75 9 9 7 12 26 31 29 1 5 6 22 22 4 36 16 4 11 59 64 34 48 49 52 46 21 2 1 4 1 17 14 19 72 5 58 60 26 10 10 35 59 35 1 66
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
STOCK NUMBER
96906 96906 96906 96906 96906 96906 96906
MS35310-357 MS35338-118 MS35338-122 MS35338-141 MS35338-26 MS35338-27 MS35338-44
96906 96906
MS35338-45 MS35338-46
5310-00-407-9566 5310-00-637-9541
96906 96906
MS35338-48 MS35338-50
5310-00-820-6653
96906 96906 96906
MS35338-51 MS35338-6 MS35340-44
5310-00-584-7888
96906 96906 96906 96906 96906 96906
MS35340-45 MS35340-47 MS35643-1 MS35644-1 MS35645-1 MS35649-2252
5310-00-959-4679 5310-00-655-9370 5330-00-684-7851 2910-00-893-2592 2910-00-141-9758 5310-00-997-1888
96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906
MS35649-2352 MS35934-2 MS51095-420 MS51473-02 MS51864-109-30 MS51922-1 MS51922-17 MS51922-18 MS51922-21 MS51953-171 MS51967-14 MS51967-2 MS51967-20 MS51967-23
5310-00-187-2427 5310-00-984-7042 5310-00-543-5101 5310-00-582-5965
5310-00-682-5930
4820-00-865-6946 5305-00-165-8074
5310-00-088-1251 5310-00-087-4652 5310-00-914-6028 5310-00-959-1488 4730-00-196-1509 5310-00-761-6882 5310-00-763-8920 5310-00-763-8921 I-6
FIG.
ITEM
6 8 6 7 30 7 1 2 3 4 5 6 7 8 30 5 7 8 9 29 30 32 31 10 28 28 2 7 29 29 29 9 9 9 3 4 5 5 28 31 31 28 7 7 7 7 28 31 6 28 28
1 20 2 60 9 57 3 2 5 2 22 9 40 6 2 18 2 11 6 47 22 2 59 2 2 11 13 73 38 61 34 3 I 2 6 5 23 19 6 58 45 15 74 58 63 65 29 60 10 5 10
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
STOCK NUMBER
FIG.
ITEM
7 9 29 30 32 2 7 8 29 7 29 30 7 8 29 10 31 30 6 30 28 7 30 6 9 29 32 30 7 29 28 9 9 9 9 9 9 30 30 8 7 7 8 8 8 7 7 7 7 7 7
3 7 48 23 3 10 41 7 39 50 62 8 61 12 33 4 55 4 12 12 1 56 21 8 5 46 1 1 39 37 30 22 17 8 16 12 15 17 16 13 15 19 18 21 17 16 14 17 25 26 30
96906
MS51967-8
5310-00-732-0558
96906
MS51971-1
5310-00-903-5966
96906
MS51971-2
5310-00-767-0445
96906
MS51971-3
5310-00-913-8881
96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906
MS51971-4 MS51971-7 MS51971-8 MS52125-1 MS52149-2 MS75020-1 MS90725-168 MS90725-20 MS90725-58 MS90725-6 MS90725-60
5310-00-965-1800 5310-00-764-6609 5310-00-924-5897
96906 96906
MS90725-69 MS90725-8
5305-00-269-3219 5305-00-225-3839
62503 79470 60342 lDG36 60342 1DG36 18265 62503 62503 78280 57684 57684 57684 62445 57684 57684 57684 57684 11649 11649 11649
NPSM-200 MI/D NT10004 P10-1870 P10-5533 P11-2667 P11-4319 P11-9778 P9812-01 P9814 QS-1003 R7934 R85305 R8917 R8925 R8956 R9021 R9054 R9090 SS-4BHT-12 SS-4BHT-24 SS-4BHT-36
5935-00-059-2841 5305-00-724-5914
5305-00-068-0502 5305-00-269-3211
I-7
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
OR9V4 18265 5Z683 60642 62445 15460 62503 62503 62503 96046 OG2R6 62503 96046 3T557
88763 94189 62445 62445 62445 62445 62445 62445
UNA-111 XLP18-2063 000-01125 000-03528-0084 0126 0049 017-048-00 02B114-3FIEEMC 02B114-3F13MIX 0223-4923 02466 03ST135-3MIXEE 03ST72-3MIXEE 03222 04TT-16-50-4M-4M 90 04TT48-4M-4M90 04TT76-108JCC-4M P90 0418-2520 05254 072-6227 10-10 10100 10209 10271 10273 10274 103BLK06-32-H3F 103BLK06-32-6MSH3F 103CC 10555 110-0169 110-1428 110-1492 110-2193 110-2298 110-2659
62445
110-2797
62445
110-2799
62445
110-2800
3T557 3T557 62445 96046 80535 15460 05624 94189 94189 94189 94189 3T557 3T557
STOCK NUMBER
I-8
FIG.
ITEM
31 9 7 7 14 31 29 29 5 28 29 29 28 8
57 14 4 78 4 44 43 41 14 20 30 42 19 25
8 8
26 29
26 28 32 31 8 29 29 29 29 8 8
18 45 6 43 16 29 13 18 17 22 23
9 29 14 20 18 23 25 14 21 13 14 17 17 19 20 19 20 25 16 16 20
24 26 11 16 2 4 5 17 26 7 2 8 23 9 14 2 8 4 2 5 5
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
62445
110-2800
62445
110-3316
62445 62445 62445 62445 62445 62445
110-3735 110-3790 110-3952 110-4935 110-5501 110-7095
62445
110-7101
62445
110-7105
62445 62445
110-7283 110-7548
62445 62445 62445 62445 62445 62445 62445 62445
110-7550 110-7556 110-7602 110-7731 110-7821 110-7844 110-9048 111 2299
62445 62445 62445 62445
111-0259 111-0422 111-0548 111-0573
62445
111-0577
62445 62445
111-0606 111-0664
62445 62445 62445 62445
111-1153 111-1168 111-1179 111-1193
STOCK NUMBER
I-9
FIG.
ITEM
25 26 17 19 23 10 20 15 20 16 11 17 17 19 10 11 18 19 21 25 27 11 14 14 11 12 23 26 17 25 16 21 22 10 10 19 23 21 27 19 12 23 10 26 26 20 26 10 25 25 11
2 17 7 16 12 10 18 2 1 6 23 11 29 8 9 4 9 3 3 9 2 14 16 8 6 3 2 10 2 7 4 9 4 17 21 1 10 28 10 4 1 1 27 9 1 4 16 41 8 10 20
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
62445 62445 62445 62445 624e'5
111-1218 111-1336 111-1382 111-1602 111-2232
62445
111-2240
62445 62445
111-2264 111-2295
62445 62445
111-2307 111-2322
62445 62445 62445 62445 62445
111-2333 111-2341 111-2418 111-2429 111-2813
62445
111-2824
62445
111-2858
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
111-3148 111-5464 111-5470 111-7861 111-7869 111-8642 111-8659 111-8673 111-8688 111-8693 111-8707 111-8727 111-8760 111-8960 111-8998 111-9246 111-9610 112-2399 112-2477 112-3665
STOCK NUMBER
5310-01-166-5857 5330-01-273-7451
I-10
FIG.
ITEM
10 25 11 10 10 17 19 20 13 17 19 19 20 25 19 17 27 11 21 16 20 13 14 17 19 21 23 10 21 10 20 21 27 10 23 17 10 27 27 11 10 11 27 21 11 27 10 26 25 10 10
8 1 12 15 29 21 21 13 5 26 7 24 7 11 12 16 1 3 1 1 6 6 1 9 10 13 13 11 7 13 17 12 30 44 14 13 30 19 11 18 24 2 16 42 17 18 23 2 3 43 18
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 88763 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 19207 9K690 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 112-4753 112-5788 112-6918 112-6976 112-7679 112-8196 113-1115 113-2314 113-6481 113-7239 113-7280 11455D-4W/C 116-0592 116-1469 116-2449 116-6103 116-6110 116-6111 116-6343 116-6345 116-6951 116-7010 116-7266 116-7425 116-8140 116-8817 11674728 11675004-1 117-0289 117-0293 117-0580 117-0642 117-2303 117-3241 117-3627 117-3631 117-3697 117-3962 117-3971 117-4016 117-4190 117-4191 117-4192 117-4194 117-4421 117-4482 117-4483 117-4605 117-4706 117-4764 117-5630
STOCK NUMBER
5330-01-188-0852
2920-01-211-6691
2940-01-217-4967 4330-01-204-3285 2910-00-470-1241 5330-01-343-2648
I-11
FIG.
ITEM
21 18 11 11 25 14 15 10 18 27 27 8 19 13 18 14 25 10 12 12 20 27 27 19 19 21 7 7 13 13 27 13 26 16 18 18 10 26 17 10 14 10 10 10 11 10 10 26 14 17 26
6 16 5 22 6 7 1 38 3 26 23 31 17 11 14 14 12 53 5 6 10 29 14 13 23 30 70 71 8 10 28 12 3 3 5 8 26 12 3 25 15 54 55 51 13 33 32 7 5 17 14
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
STOCK NUMBER
FIG.
ITEM
4720-01-273-7544
17 18 15 23 15 9
4 11 3 9 5 19
94189 62445 62445 62445 62445 62445 62445 62445 62445 62445
117-5634 117-7087 117-8136 117-8319 117-8336 12RC48-DWG-12FP W109 12098 121-0230 121-0231 121-4987 121-5235 121-5500 121-5850 121-6105 121-6107 121-6108
62445 62445 62445 62445 62445
121-6119 121-6127 121-6128 121-6143 121-6151
62445 62445 62445 62445 62445 62445 94189 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 96046 62445
121-6240 121-6307 121-6511 121-6697 123-6290 123-6291 12426 128-9961 130-7178 130-8147 130-8152 130-8397 130-8454 130-8752 130-8811 130-8846 130-8848 132-0251 132-0402 132-0794 132-1475 132-1477 132-1478 132-1483 132-1484 13301 140-0708
29 23 23 27 27 21 19 21 27 10 17 27 11 20 11 12 23 27 21 11 11 25 25 29 16 15 16 16 15 15 16 16 16 16 16 10 16 15 15 15 15 15 28 12
11 16 17 15 12 34 11 10 7 50 18 24 21 11 7 2 3 17 2 25 8 16 15 8 10 7 12 11 12 10 15 16 14 13 8 34 7 9 6 4 8 11 40 7
62445 62445 62445 62445 62445 62503
5310-01-149-3703
5910-01-250-7745
5977-01-184-9153
5330-01-005-6638
I-12
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
62445 62503 62503 62503 62503 62503 62503 62503 62503 62503
140-1420 14065 14160 1437-1 1437-12 1437-15 1437-16 1437-17 1437-2 1437-3
62503 62503 62503 62503 62503 79470 79470 15460 62445 15460 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 15460 62445 62445 62445 62445 62445 62445 96046 96046 62445 62445 62445 62445 62445 62445 62445 62445 62445
1437-4 1437-5 1437-6 14422 14595 1468X4X4 1484X4 15-12 150-07-504-2761 174-5 17556 17762 17763 17766 17767 17772 17773 17803 17815 18066 18316 18619 21-42-1 210-1047 210-1224 210-1681 210-1785 210-1802 210-2313 21076 21077 213-1029 213-1081 213-1153 213-2685 213-4045 213-4064 213-4266 213-4631 213-4712
STOCK NUMBER
5330-01-278-6914
I-13
FIG.
ITEM
19 31 31 4 7 7 7 7 7 4 7 7 7 4 31 31 8 9 31 22 31 29 29 29 29 29 29 29 29 29 29 29 29 31 11 27 21 19 19 20 28 28 21 20 10 14 18 18 11 23 18
27 51 53 8 13 82 81 80 9 9 12 10 11 10 52 56 24 21 46 3 11 12 20 22 24 25 7 4 27 10 14 23 21 4 27 32 23 20 5 9 33 34 33 3 42 9 13 6 11 15 10
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 213-4799 213-4884 213-5736 213-5737 213-5748 213-6434 213-6438 213-6517 213-6596 213-7096 213-7302 213-7306 213-7568 213-7580 213-7591 213-7750 213-7909 213-8266 213-8415 213-8417 213-8442 213-9287 213-9737 213-9771 216-3210 223-0170 223-0181 223-0216 223-0704 223-0761 223-1127 223-1747 223-1944 223-2033 223-2528 223-2840 223-2963 223-3056 223-3085 223-3086 223-3443 223-4133 223-4457 223-4784 223-4870 223-4896 223-4903 223-4922 223-4943 223-5117 223-5118
STOCK NUMBER
3120-01-239-2562
5330-01-014-0198
5330-01-273-7454
5310-01-190-7468
2910-01-174-1334
I-14
FIG.
ITEM
10 10 17 17 17 10 19 19 21 21 21 21 13 21 21 24 17 12 17 17 17 14 27 23 20 27 27 21 18 23 17 27 19 17 21 21 22 26 13 13 10 25 11 21 27 11 11 19 19 14 14
19 46 19 24 22 40 15 6 41 35 38 37 3 29 27 2 6 8 27 25 20 10 13 18 20 21 20 43 4 7 15 25 22 10 36 17 2 15 1 4 14 13 19 4 3 16 10 25 26 13 12
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 624-'t5 62445 62445 62445 62445 62445 62445 96046 94189 94189 62445 94189 52159 52159 06970 62445 96046 15460 15460 15460 15460 76445 39428 62445 62445 62445 62445 62445
PART NUMBER 223-5181 223-5352 223-5461 223-5466 223-5467 223-5474 223-5520 223-5715 223-5816 223-5846 223-6578 223-7494 223-7847 223-8021 223-8081 223-8083 223-8156 223-8196 223-8548 223-8623 223-8751 223-9331 223-9458 223-9471 223-9550 223-9984 224-0193 224-6170 224-8132 224-8154 23810 23852 23855 241-1054 24801 25104-25B21GAD 25504-25B21GAD 29V00-95 298-5006 29863 31-30-1 31-30-2 31-32-1 31-32-2 32233 3254T4 336-1809 336-2337 336-2379 336-2581 336-2601
STOCK NUMBER
3030-01-281-8802
5945-01-187-2074
5330-01-209-7032
I-15
FIG.
ITEM
10 17 10 10 10 10 24 11 10 19 21 26 10 10 10 10 12 10 18 20 26 22 17 11 14 26 20 20 10 10 28 29 29 18 29 7 7 7 16 28 31 31 31 31 31 29 19 27 27 23 23
7 5 12 22 20 16 5 1 6 19 15 6 39 58 57 56 4 47 15 12 4 2 28 9 3 8 2 19 31 28 48 5o 57 1 9 21 20 79 9 47 42 41 10 9 61 63 18 4 9 6 5
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 6244i5 62445 62445 62445 62445 62445 62445 62445 62503 62445 39428 15460 62503 62503 62503 62503 62503 15460 79470 62503 62503 15460 15460 15460 15460 94189 62503 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 336-4077 336-5861 336-7789 336-9305 337-1587 337-1612 337-1660 337-1666 337-1689 337-1692 337-1748 337-1845 337-1876 337-1885 337-1887 337-1888 337-2269 34-2-12 LTH 347-0246 3594T24 36-93-3 37-02106 37-02110-1 37-02114-9 37-02116-2 37-1-1/2-20 LTH 37-69-01 3750X2 38-1-1/2-2.5 LTH 39-1-1/2-EL 40-218-1 40-218-2 40-243-2 40-244-01 40932 4123 415-0264 415-0450 415-1011 415-1774 415-1806 415-2349 415-2509 415-2517 415-2528 415-2627 415-2750 415-2795 415-2877 415-3069 415-3128
STOCK NUMBER
5330-01-012-8860 5330-01-109-9915
I-16
FIG.
ITEM
20 21 27 21 24 24 22 21 18 21 21 21 21 21 21 21 13 28 17 2 31 30 30 30 30 28 31 9 28 28 31 31 31 31 29 31 22 24 27 17 14 27 10 10 10 21 21 21 21 26 10
15 16 33 32 3 4 5 24 12 5 31 14 20 21 19 22 9 31 1 12 40 15 19 24 20 28 25 20 26 27 17 18 19 26 2 5o 2 1 31 12 6 5 48 49 45 25 8 11 18 13 52
SECTION IV
TM 10-4320-315-24P C01 CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 15460 76700 94189 94189 80535 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 2X949
415-3159 415-3631 415-3697 415-4336 415-4337 415-4338 415-4339 415-4340 415-4341 415-4482 415-4891 415-4893 415-6058 415-6099 415-6225 415-6890 415-7240 415-7269 415-7445 415-7694 415-7756 415-8040 415-8341 415-8421 416-0764 419-1148 43-4 43230P 43593 43905 450-0505 46-101 46-102 46-107-1 46-108-1 46-7 46-77 47-109 47-110-1 47-111-1 49-12 49-2 5-112 5-23 5-4 5-64 5032
15460 15460 15460 22031
54-60 54-64 54-65 5405-2-2
PART NUMBER INDEX STOCK NUMBER
5330-01-343-2670
5365-01-367-6648
I-17
FIG. 26 21 21 13 13 13 13 13 13 11 22 22 27 13 27 27 23 19 11 11 22 17 26 25 27 14 31 8 29 29 32 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 10 28 31 31 31 9
ITEM 11 40 39 13 14 15 16 17 18 15 2 6 6 2 22 27 8 14 24 26 1 14 5 14 8 18 23 8 28 19 5 12 22 13 28 39 14 24 35 34 21 20 33 8 38 27 3 3 31 30 29 23
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
19220
5601U
95146 95146 39428 15460 15460 15460 3T557 3T557 3T557 96046 62445 62503 62503 2S956 15460 15460 62503 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 59150 96046 96046 96046 96046 94189 94189 94189
57F2350 57F2356 5827T15 6-1 6-10 6-11-1 6RC15-50-4MP90-6 S 6RC36-4M45-4M90 6RC45-65-4M90 60646 620-8701 65-0-9020-55 66-0-9020-56 68104 69-55 7-210 70-6 75392 75399 75501 75506 75514 75532 76161 76186 76187 76188 76189 76190 76248-2 77222 77244 77461 77686 7769 7770 7820
96046 94189 94189 94189 94189 15460 30536 96046 96046 94189
78994 7976 7997 8152 8291 85-1 8516 85365CA 85386 8540
PART NUMBER INDEX STOCK NUMBER
5330-01-275-7941
5330-01-275-7940 5330-01-275-7942 5330-01-275-7943
I-18
FIG.
ITEM
3 4 7 7 31 31 31 31 8
11 17 45 38 2 7 37 15 30
8 8 28 18 9 9 1 31 31 7 28 28 28 28 28 28 28 28 28 28 28 28 9 28 28 28 28 29 29 29 29 28 29 29 29 29 31 31 28 28 29
28 27 46 7 9 18 7 36 16 33 49 36 43 41 35 37 38 51 50 39 42 44 25 23 25 21 24 51 54 16 53 32 15 6 3 5 5 6 17 18 52
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES PART NUMBER INDEX
CAGEC
PART NUMBER
15460 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042
87-1 9016-235-10-1 9016-235-10-2 9016-235-11-1 9016-235-12-1 9016-235-13-71 9016-235-14-1 9016-235-15-1 9016-235-15-2 9016-235-16-1 9016-235-16-2 9016-235-17-1 9016-235-18-1 9016-235-20-1 9016-235-20-2 9016-235-21-1 9016-235-22-1 9016-235-22-2 9016-235-22-3 9016-235-22-4 9016-235-24-1 9016-235-25-1 9016-235-26-1 9016-235-27-2 9016-235-27-3 9016-235-27-5 9016-235-27-6 9016-235-27-7
04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 62503 22973 39428 94189 94189 39428
9016-235-28-2 9016-235-28-3 9016-235-28-4 9016-235-28-5 9016-235-28-6 9016-235-3-1 9016-235-39-1 9016-235-41-4 9016--235-44-1 9016-235-49-1 9016-235-51-1 9016-235-8-1 9016-235-9-1 9138 930-720-28 9434T19 9536 9537 9600K21
STOCK NUMBER
I-19
FIG.
ITEM
31 1 1 4 4 2 1 5 5 5 5 5 1 1 1 3 4 3 3 4 2 5 3 5 5 5 5 3 5 4 3 3 4 2 1 5 3 4 5 5 3 3 31 7 30 29 29 29
32 17 18 13 20 3 4 10 S 24 25 9 6 15 16 10 18 14 20 14 5 20 15 6 3 7 8 3 12 19 16 21 15 6 1 4 2 21 13 11 9 19 54 42 11 55 56 44
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
1 1 1 1 1 1 1 1
1 2 3 4 5 6 7 8
1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
STOCK NUMBER
5310-00-582-5965
5310-00-582-5965
5310-00-903-5966 5310-01-308-8205
5305-00-021-3620
5310-00-582-5965 5310-00-997-1888
I-20
CAGEC 04042 96906 96906 04042 96906 04042 2S956 81518 96906 62503 62503 62503 62503 62503 04042 04042 04042 04042 96906 96906 04042 96906 04042 04042 98003 98003 96906 96906 96906 39428 96906 96906 96906 04042 04042 96906 96906 96906 96906 62503 04042 04042 19220 96906 62503 04042 04042 04042 98003 81348
PART NUMBER 9016-235-3-1 MS35297-6 MS35338-44 9016-235-14-1 MS24243/10604 9016-235-18-1 68104 CWGS-4.5 ID X 14 4 IN LG MS24662-21 D-9021-2 D-9021-11 D-9021-14 D-9021-16 D-9021-15 9016-235-20-1 9016-235-20-2 9016-235-10-1 9016-235-10-2 MS35297-6 MS35338-44 9016-235-13-1 MS24243/10604 9016-235-24-1 9016-235-28-6 HA946LS-1-RG HC209ZE MS24662-21 MS51971-1 MS27183-48 3594T24 MS35338-6 MS35307-307 MS24243/10604 9016-235-41-4 9016-235-27-7 MS35297-6 MS35338-44 MS35649-2252 MS24662-21 D-9021-13 9016-235-8-1 9016-235-21-1 5601U MS24662-21 D-9021-13 9016-235-22-2 9016-235-26-1 9016-235-28-3 HC209ZE MIL-P-5304A
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
ITEM 19 20 21 22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
STOCK NUMBER
5310-00-809-4058 5310-00-582-5965 5305-00-071-2513 5310-00-809-4058 5310-00-997-1888
5310-00-080-6004 5310-00-637-9541
5310-00-582-5965 5310-00-997-1888
I-21
CAGEC 04042 04042 04042 96906 96906 96906 80204 96906 96906 96906 62503 62503 62503 62503 81348 62503 04042 04042 04042 98003 19220 04042 04042 04042 04042 62503 96906 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 04042 62503 62503 96906 96906 96906 96906 04042 96906 96906 96906 04042 04042
PART NUMBER 9016-235-9-1 9016-235-22-3 9016-235-28-4 MS27183-10 MS35297-6 MS35338-44 B1821BH025C250N MS27183-10 MS35649-2252 MS24243/10604 D-9021-1 1437-1 1437-3 1437-6 MIL-P-53054A D-9021-8 9016-235-11-1 9016-235-22-4 9016-235-28-5 HC209ZE 5601U 9016-235-22-1 9016-235-28-2 9016-235-12-1 9016-235-44-1 D-9021-3 MS24243/10604 9016-235-27-3 9016-235-27-4 9016-235-39-1 9016-235-15-2 9016-235-27-2 9016-235-27-5 9016-235-27-6 9016-235-17-1 9016-235-15-1 9016-235-51-1 9016-235-27-7 9016-235-49-1 0223-4923 D-9021-12 MS27183-14 MS35297-64 MS35338-46 MS35649-2352 9016-235-25-1 MS35297-12 MS35338-44 MS35649-2252 9016-235-16-1 9016-235-16-2
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
STOCK NUMBER
5310-00-187-2427
5305-00-068-0502 5310-00-582-5965 5310-00-761-6882
5305-00-543-2419 5310-00-637-9541 5310-00-732-0558 6210-00-542-6393 6240-00-155-7836
6625-01-086-9580
5340-00-088-6655
5930-00-906-3477 5930-00-683-1629 5930-00-852-2407
5305-00-225-3839 I-22
CAGEC 96906 96906 62503 62503 62503 62503 62503 96906 96906 96906 62503 96906 80204 96906 96906 5Z683 96906 96906 96906 62503 62503 62503 62503 62503 62503 57684 57684 57684 57684 96906 57684 52159 52159 02570 02570 96906 11649 11649 02570 02570 02570 11649 12623 02570 62503 96906 96906 96906 4P812 95146 96906
PART NUMBER MS35310-357 MS35338-122 D-9020-25 D-9020-26 D-9020-22 D-9020-23 D-9020-24 MS90725--6 tAS35338-44 MS51967-2 D-9020-27 MS52149-2 B1821BH038C113N MS35338-46 MS51967-8 000-01125 MS25041-2 MS25237-327 MS24243-10604 D-9021-10 1437-2 1437-4 1437-5 1437-3 1437-12 R9054 R7934 R9021 R9090 MS24532-2 REV G R85305 25504-25B21GAD 25104-25B21GAD B-400-1-4 B-400-8-4 MS21333-101 SS-4BHT-12 SS-4BHT-24 B-400-3 B-401-PC B-400-3-4TMT SS-4BHT-36 B-L62TF4 B-400-11-4 70-6 MS27407-2 MS24523-23 MS24659-23D E-1000-F2-352 57F2356 MS90725-8
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
STOCK NUMBER
7 7 7 7 7 7 7 7
40 41 42 43 44 45 46 47
5310-00-582-5965 5310-00-903-5966
7 7 7 7
48 49 50 51
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8
68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 1 2 3 4 5
5305-00-984-7343
5310-00-767-0445
5310-00-543-5101 5310-00-087-4652 5305-00-576-5417 5310-00-984-7042 5310-00-913-8881 5310-00-914-6028 5310-00-959-1488 5305-00-263-7536
5305-00-721-8010 5310-00-682-5930 5310-00-088-1251
5305-00-068-0510
5305-00-655-6974 I-23
CAGEC 96906 96906 22973 08108 05824 95146 96906 05624 96906 96906 96906 05624 96906 05624 78388 05624 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 96906 05624 77342 96906 19207 9K690 96906 96906 96906 96906 62503 62503 60642 06970 62503 62503 62503 80204 62503 62503 96906 96906
PART NUMBER MS35338-44 MS51971-1 930-720-28 ML313 E19-283 57F2350 MS35191-276 DYN240027-000-024 MS3112E16-8P MS3112E18-11P MS51971-2 DYN11O807-000-024 MS3470W20-16P DYNK-207 EPS-1-04 DYNK-208 MS90725-20 MS35338-27 MS51922-17 MS35307-360 MS35338-141 MS51971-3 D-9010-3 MS51922-18 MS27183-56 MS51922-21 MS35309-368 DYNC11220-300-024 KUHP-5DT1-24 MS18212-17 11674728 11675004-1 MS35307-314 MS35340-44 MS51922-1 MS24661-25 D-9021-4 D-9020-102 000-03528-0084 29V00-95 1437-17 1437-16 1437-15 B1821BH038C100N D-9015-4 D-9020-20 MS14304-2J04 MS35307-315
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
STOCK NUMBER
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
5310-00-582-5965 5310-00-903-5966
8 8
24 25
79470 3T557
8 8 8 8
26 27 28 29
3T557 3T557 3T557 3T557
8
30
3T557
8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
31 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
88763 62503 96906 96906 96906 96906 96906 96906 96906 1DG36 62503 88044 88044 1DG36 18265 18265 18265 60342 60342 62503 62503
5310-00-637-9541 5310-00-913-8881 2910-00-646-9727
5305-00-207-8253
2910-00-893-2592 2910-00-141-9758 5330-00-684-7851 5305-00-269-3211 5310-00-637-9541 5310-00-732-0558
I-24
CAGEC 96906 96906 76700 62503 96906 96906 96906 78280 78280 05624 05624 57684 57684 96906 96906 62445 3T557 3T557
PART NUMBER MS35338-44 MS51971-1 43230P D-9015-3 MS35307-350 MS35338-46 MS51971-3 QS-1003 LP535 DYNK-209 10100 R8956 R8917 MS35307-308 MS35338-118 R8925 103BLK06-32-H3F 103BLK06-32-6MSH3F 1468X4X4 04TT-16-50-4M-4M 90 04TT48-4M-4M90 6RC45-65-4M90 6RC36-4M45-4M90 04TT76-108JCC-4M P90 6RC15-50-4MP90-6 S 11455D-4W/C D-9020-106 MS35644-1 MS35645-1 MS35643-1 MS24629--2 MS90725-60 MS35338-46 MS51967-8 P10-5533 65-0-9020-55 AN735-64 AN735-48 P11-4319 FHG09-0022 XLP18-2063 P11-9778 P11-2667 P10-1870 66-0-9020-56 12RC48-DWG-12FP W109
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
20 21 22 23 24 25 26 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
STOCK NUMBER
5305-00-943-2092 5310-00-820-6653 5310-00-764-6609 3030-01-281-8802
5310-01-166-5857
2910-00-470-1241 4330-01-204-3285 5305-00-632-2777
I-25
CAGEC 79470 79470 79470 22031 88763 59150 96906 62503 96906 96906 2X949 96906 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 96906 96906 62503 62445 62445 62445 62445 62445 62445
PART NUMBER 3750X2 1484X4 NT10004 5405-2-2 103CC 76248-2 MS24662-21 D-9021-5 MS35307-468 MS35338-50 5032 MS51971-7 BF6L912B 223-5816 223-5181 111-1218 110-7101 110-3735 111-2824 223-5461 111-2858 223-3443 111-1602 223-5474 110-7844 112-3665 213-4799 223-5467 110-9048 223-5466 111-9246 111-8693 117-4016 117-3697 111-0577 224-8154 111-2232 111-8642 224-8132 117-4483 117-4482 132-0402 MS35307-358 MS27183-13 D-9020-200 113-2314 223-7847 213-6434 111-1153 213-1153 112-2477
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 12 12 12 12 12 12 12 12 13
44 45 46 47 48 49 5o 51 52 53 54 55 56 57 58 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 1 2 3 4 5 6 7 8 1
STOCK NUMBER
5330-01-273-7451
2940-01-217-4967 5330-01-343-2670
5330-01-278-6914
2910-01-174-1334 I-26
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 111-5470 415-2528 213-4884 223-8196 415-2509 415-2517 121-6108 117-4194 415-3128 116-6111 117-4191 117-4192 223-8083 223-8081 223-8021 223-5715 111-8707 111-2333 110-7101 112-6918 110-7548 121-6143 121-6697 223-9471 223-4903 213-4266 111-1382 117-4421 110-7105 415-4482 223-4896 111-8960 111-8688 223-4457 111-1193 121-6127 112-6976 110-7095 415-7445 121-6511 415-7694 210-1047 111-0573 121-6151 110-7548 223-8156 116-6343 116-6345 140-0708 213-8266 223-3085
SECTION IV
TM 10-4320-315-24P C01 CROSS-REFERENCE INDEXES
FIG. 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 15 15 15 15 15 15 15 15 15 15 15 15 16 16 16 16 16
ITEM 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5
FIGURE AND ITEM NUMBER INDEX STOCK NUMBER CAGEC 5365-01-367-6648 3120-01-239-2562
5330-01-343-2648
5330-01-188-0852
5910-01-250-7745
2920-01-211-6691
I-27
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 415-6099 213-7568 223-3086 111-2240 111-2813 110-2797 117-0289 337-2269 117-0293 116-1469 117-0642 415-4336 415-4337 415-4338 415-4339 415-4340 415-4341 111-2813 110-2797 223-9550 0126 0049 117-4706 415-1806 112-8196 110-7283 213-2685 213-9287 110-0169 223-5118 223-5117 116-6103 117-4190 110-7105 110-2659 419-1148 113-1115 110-3952 117-8136 132-1478 117-8336 132-1477 130-7178 132-1483 132-1475 130-8454 132-1484 130-8397 111-2418 110-2800 117-3241 110-7602 110-2800
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES
FIG. 16 16 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 18 18 18
ITEM 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 1 2 3 4 5 6 7 8 9 10 11
FIGURE AND ITEM NUMBER INDEX STOCK NUMBER CAGEC
5945-01-187-2074
5977-01-184-9153
4720-01-273-7544 5330-01-014-0198
5330-01-273-7454
I-28
62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 110-5501 132-0794 132-0251 298-5006 128-9961 130-8152 130-8147 130-8848 130-8846 130-8752 130-8811 347-0246 110-7550 117-3971 117-5634 223-5352 213-7909 110-3316 110-2797 111-2813 223-2033 110-7095 415-1774 111-7869 415-8040 223-1127 111-2322 117-4764 121-6108 213-5736 213-8442 111-2232 213-5748 110-2797 213-5737 213-8417 111-2240 213-8415 223-9458 110-7095 241-1054 110-1492 113-6481 223-0704 117-3627 213-4064 620-8701 117-3631 110-7101 213-4712 117-7087
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
STOCK NUMBER
18 18 18 18 18 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
12 13 14 15 16 1 2 3 4 5 6 7 a 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1s 16 17 18 19
5330-01-012-8860
I-29
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 337-1689 213-4045 116-2449 223-8548 112-5788 111 2299 110-2799 110-7101 111-0548 210-1802 213-6517 111-2240 110-7095 110-2797 111-2813 121-5850 111-2307 116-7425 415-7269 213-6438 110-3316 116-0592 336-1809 223-5846 210-1785 111-2232 223-1944 116-8140 111-2264 223-4922 223-4943 140-1420 110-4935 224-0193 213-1081 111-0664 110-2800 111-2429 111-2295 110-2799 210-2313 116-6951 121-6128 223-8623 111-2232 110-2797 336-4077 110-1428 111-2858 110-3790 224-6170
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
20 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 22 22 22 22 22 22 22
20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 1 2 2 2 2 3 4
STOCK NUMBER
5310-01-149-3703
5330-01-109-9915
5310-01-190-7468
I-30
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 216-3210 111-2341 121-6307 110-7101 223-4784 337-1692 112-4753 111-2824 415-2750 110-7731 121-6105 415-2795 111-3148 111-2813 337-1845 223-6578 336-5861 223-2840 415-2877 337-1887 337-1876 337-1885 337-1888 210-1681 337-1666 415-2627 110-2659 213-7591 111-0259 213-7580 116-8817 337-1748 336-9305 213-1029 121-5500 213-7096 223-2528 213-7306 213-7302 415-3697 415-3631 213-6596 111-8760 223-0216 415-7756 223-2963 223-9331 415-0264 415-4891 150-07-504-2761 110-7821
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
22 22 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 24 24 24 24 24 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 26 26 26 26 26 26 26 26 26 26 26
5 6 1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11
STOCK NUMBER
5330-01-209-7032
I-31
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445
PART NUMBER 337-1660 415-4893 111-0573 110-7548 121-6151 110-2193 336-2601 336-2581 223-0761 415-7240 117-8319 111 2299 110-3316 111-2813 111-7861 213-4631 121-0230 121-0231 213-9771 415-0450 213-7750 3337-1587 337-1612 223-5520 111-1336 110-2800 112-2399 110-2799 110-2298 112-7679 110-7556 111-1168 110-7101 111-1179 111-2295 116-6110 223-4133 415-8421 123-6291 123-6290 111-0606 111-9610 117-2303 223-8751 415-8341 223-7494 117-4605 223-9984 111-0577 110-7548 415-3159
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
26 26 26 26 26 26 26 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 28 28 28 28 28 28 28 28 28 28 28
12 13 14 15 16 17 18 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 1 2 3 4 5 6 7 8 9 10 11
STOCK NUMBER
5305-00-724-5914 5310-00-820-6653 5310-00-809-5997 5310-00-763-8920 4820-00-865-6946 4730-00-187-7568
5310-00-763-8921 5310-00-584-7888 I-32
CAGEC 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 62445 624f45 62445 62445 62445 62445 62445 62445 62445 62445 96906 96906 2X949 96906 96906 96906 96906 88044 62503 96906 96906
PART NUMBER 117-3962 415-3069 117-5630 223-3056 111-0664 110-2800 0418-2520 111-2322 110-7101 223-4870 336-2337 415-2349 415-6058 121-6107 416-0764 336-2379 111-0422 111-8673 121-5235 213-9737 116-7266 121-4987 111-8727 121-6240 111-8998 111-8659 223-0181 223-0170 415-6225 113-7280 121-6119 223-1747 113-7239 415-6890 117-0580 116-7010 111-5464 415-1011 210-1224 336-7789 MS90725-168 MS35338-50 5032 MS27183-17 MS51967-20 MS35934-2 MS14304-1C04 AN911-2 D-9016 MS51967-23 MS35338-51
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
STOCK NUMBER
28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 29 29 29 29 29 29 29 29 29 29
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 1 2 3 4 5 6 7 8 9 10
5305-00-947-4354
4730-00-360-0589
4730-00-196-1509
5330-01-005-6638 5330-01-275-7941 5330-01-275-7942 5330-01-275-7943
5330-01-275-7940
I-33
CAGEC 80204 62503 62503 96906 62503 96046 96046 96046 96046 96046 96906 96046 96046 96046 62503 62503 62503 96906 62503 62503 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 96046 75665 62503 94189 94189 94189 94189 94189 94189 94189 94189 94189
PART NUMBER B1821BH05C300N D-9016-3 D-9016-4 MS51864-109-30 D-9016-2 85365CA 85386 03222 02466 77461 MS27022-9 77222 77686 77244 38-1-1/2-2.5 LTH 39-1-1/2-EL 37-1-1/2-20 LTH MS51953-171 NPSM-200 MI/D 34-2-12 LTH 78994 21076 21077 75514 75399 75532 76161 76188 13301 75506 76189 75501 76190 05254 60646 29863 23810 75392 76187 76186 CF50-01S CPLG D-9022-A 40932 8152 17773 8291 7997 17772 12426 24801 17815
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
STOCK NUMBER
5310-00-965-1800 5310-00-655-9370 5305-00-889-2910 5305-00-225-3839 5310-00-682-5930 5310-00-903-5966
5305-00-269-3211 5310-00-637-9541 5310-00-732-0558
5306-00-637-9675 5306-00-543-4405 5310-00-959-4679 I-34
CAGEC 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 94189 OG2R6 96906 62503 96906 96906 96906 79470 96906 96906 96906 62503 62503 62503 62503 39428 62503 96906 96906 96906 62503 94189 94189 94189 94189 94189 94189 94189 94189 96906 96906 96906 96906
PART NUMBER 12098 17556 10271 18066 7976 7820 10274 10273 43905 17762 18619 17763 18316 17766 17767 10555 17803 43593 10209 03ST135-3MIXEE MS24662-21 D-9021-7 MS51971-4 MS35340-47 MS35307-387 HK0709 MS90725-8 MS35340-44 MS51971-1 D13WMO3 02B114-3F13MIX 03ST72-3MIXEE 02B114-3FIEEMC 9600K21 D-9021-6 MS90725-60 MS35338-46 MS51967-8 D-9015-1 23852 7769 8540 7820 7770 9536 9537 23855 MS35307-332 MS27183-54 MS35307-334 MS35340-45
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
STOCK NUMBER
29 29 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31
62 63 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
5310-00-767-0445 5305-00-269-3219 5310-00-407-9566
5310-00-767-0445 5306-00-637-9674 5935-00-059-2841
5310-00-637-9541 5310-00-732-0558
5306-00-543-4405
I-35
CAGEC 96906 39428 96906 96906 62503 96906 08108 08108 08108 96906 96906 96906 39428 96906 62503 62503 62503 62503 62503 62503 62503 62503 96906 96906 96906 62503 62503 96906 62503 62503 96906 62503 96906 39428 62503 15460 15460 3D536 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460
PART NUMBER MS51971-2 3254T4 MS90725-69 MS35338-45 D-9010-2 MS52125-1 AML-623 M-1683 ML-1251 MS51971-2 MS35338-26 MS35307-336 9434T19 MS75020-1 D-9007 D-9007-2 37-02106 P9814 P9812-01 D-9008 37-02110-1 37-02116-2 MS90725-58 MS35338-46 MS51967-8 37-02114-9 D-9008-2 MS35307-334 D-9008-4 D-9008-3 MS24662-21 D-9021-7 MS24662-21 5827T15 D-9020-10 21-42-1 85-1 8516 6-1 5-23 31-32-2 31-32-1 174-5 46-101 46-107-1 46-77 6-11-1 7-210 40-218-1 40-218-2 40-243-2
SECTION IV
TM 10-4320-315-24P CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX
FIG
ITEM
31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 32 32 32 32 32 32
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 1 2 3 4 5 6
STOCK NUMBER
5310-00-924-5897
5305-00-165-8074
4730-00-172-0025 5305-00-269-3211 5310-00-637-9541 5310-00-732-0558
I-36
CAGEC 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 15460 96906 15460 62503 62503 62503 62503 62503 62503 62503 62503 96906 62503 OR9V4 96906 96906 96906 76445 96906 96906 96906 96906 62503 80535 80535
PART NUMBER 49-2 49-12 46-102 43-4 47-109 37-69-01 40-244-01 5-64 46-108-1 54-65 54-64 54-60 87-1 5-112 47-111-1 47-110-1 69-55 6-10 5-4 46-7 36-93-3 31-30-2 31-30-1 10-10 017-048-00 MS51473-02 15-12 D-9020-12 D-9020-100 D-9020-11 4123 14065 14422 14160 9138 MS51971-8 14595 UNA-111 MS51095-420 MS35338-48 MS51967-14 32233 MS15003-3 MS90725-60 MS35338-46 MS51967-8 D-9015-2 450-0505 072-6227
These are the instructions for sending an electronic 2028 The following format must be used if submitting an electronic 2028. The subject line must be exactly the same and all fields must be included; however only the following fields are mandatory: 1, 3, 4, 5, 6, 7, 8, 9, 10, 13, 15, 16, 17, and 27. From: To:
"Whomever" mpmt%[email protected]. mil
Subject: DA Form 2028 1. From: Joe Smith 2. Unit: home 3. Address: 4300 Park 4. City: Hometown 5. St: MO 6. Zip: 77777 7. Date Sent: 19-OCT-93 8. Pub no: 55-2840-229-23 9. Pub Title: TM 10. Publication Date: 04-JUL-85 11. Change Number: 7 12. Submitter Rank : MSG 13. Submitter FName: Joe 14. Submitter MName: T 15. Submitter LName: Smith 16. Submitter Phone: 123-123-1234 17. Problem : 1 18. Page: 2 19. Paragraph: 3 20. Line: 4 21. NSN: 5 22. Reference: 6 23. Figure: 7 24. Table: 8 25. Item: 9 26. Total: 123 27. Text: This is the text for the problem below line 27.
¶ U.S. GOVERNMENT PRINTING OFFICE: 1996-755-119/40105
The Metric System and Equivalents Linear Measure
Liquid Measure 1 centiliter = 10 milliters = .34 fl. ounce 1 deciliter = 10 centiliters = 3.38 fl. ounces 1 liter = 10 deciliters = 33.81 fl. ounces 1 dekaliter = 10 liters = 2.64 gallons 1 hectoliter = 10 dekaliters = 26.42 gallons 1 kiloliter = 10 hectoliters = 264.18 gallons
1 centimeter = 10 millimeters = .39 inch 1 decimeter = 10 centimeters = 3.94 inches 1 meter = 10 decimeters = 39.37 inches 1 dekameter = 10 meters = 32.8 feet 1 hectometer = 10 dekameters = 328.08 feet 1 kilometer = 10 hectometers = 3,280.8 feet
Square Measure Weights 1 sq. centimeter = 100 sq. millimeters = .155 sq. inch 1 sq. decimeter = 100 sq. centimeters = 15.5 sq. inches 1 sq. meter (centare) = 100 sq. decimeters = 10.76 sq. feet 1 sq. dekameter (are) = 100 sq. meters = 1,076.4 sq. feet 1 sq. hectometer (hectare) = 100 sq. dekameters = 2.47 acres 1 sq. kilometer = 100 sq. hectometers = .386 sq. mile
1 centigram = 10 milligrams = .15 grain 1 decigram = 10 centigrams = 1.54 grains 1 gram = 10 decigram = .035 ounce 1 dekagram = 10 grams = .35 ounce 1 hectogram = 10 dekagrams = 3.52 ounces 1 kilogram = 10 hectograms = 2.2 pounds 1 quintal = 100 kilograms = 220.46 pounds 1 metric ton = 10 quintals = 1.1 short tons
Cubic Measure 1 cu. centimeter = 1000 cu. millimeters = .06 cu. inch 1 cu. decimeter = 1000 cu. centimeters = 61.02 cu. inches 1 cu. meter = 1000 cu. decimeters = 35.31 cu. feet
Approximate Conversion Factors To change
To
inches feet yards miles square inches square feet square yards square miles acres cubic feet cubic yards fluid ounces pints quarts gallons ounces pounds short tons pound-feet pound-inches
centimeters meters meters kilometers square centimeters square meters square meters square kilometers square hectometers cubic meters cubic meters milliliters liters liters liters grams kilograms metric tons newton-meters newton-meters
Multiply by
To change
2.540 .305 .914 1.609 6.451 .093 .836 2.590 .405 .028 .765 29,573 .473 .946 3.785 28.349 .454 .907 1.356 .11296
ounce-inches centimeters meters meters kilometers square centimeters square meters square meters square kilometers square hectometers cubic meters cubic meters milliliters liters liters liters grams kilograms metric tons
To newton-meters inches feet yards miles square inches square feet square yards square miles acres cubic feet cubic yards fluid ounces pints quarts gallons ounces pounds short tons
Temperature (Exact) °F
Fahrenheit temperature
5/9 (after subtracting 32)
Celsius temperature
°C
Multiply by .007062 .394 3.280 1.094 .621 .155 10.764 1.196 .386 2.471 35.315 1.308 .034 2.113 1.057 .264 .035 2.205 1.102
PIN: 072677-001
This fine document... Was brought to you by me:
Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap “watermarks” and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: Free Military and Government Manuals
– Sincerely Igor Chudov http://igor.chudov.com/ – Chicago Machinery Movers