Tm-1325 Cl / Tmc-1325 Cl

Transcript

1392 x 1040 TM-1325 CL / TMC-1325 CL Progressive Scan CCD ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ 2/3” high resolution progressive scan IT CCD imager (ICX285AL/ICX285AQ) 1392(H) x 1040(V) @ 30/15 fps 6.45 μm square pixels Compact 44 x 44 x 63 mm housing LVDS versions: order TM-1325 and TMC-1325 Digital output and analog output Maximum dynamic range control with built-in look-up table (LUT) Full frame integration for long exposures Image center partial scan (500, 250 lines) Full-frame shutter to 1/16,000 sec. Asynchronous reset, no-delay shutter with pulse-width exposure control Read-out-inhibit control for multiple-camera applications RS-232 external control Near IR sensitivity and high gain CCD output Monochrome or color www.jai.com 30/15 FPS CL Specifications for TM-1325CL/TMC-1325CL 1392 (H) x 1040 (V) Cell size 6.45 μm x 6.45 μm Readout modes 1392 (H) x 1040 (V) @ 30/15 Hz (full image) 1392 (H) x 500 (V) @ 58 Hz (partial scan) 1392 (H) x 250 (V) @ 100 Hz (partial scan) Internal/External auto switch HD/VD, 4.0 Vp-p impedance 4.7K Ω VD = 15/30 Hz ± 2%, non-interlace HD = 15.99 /31.98 kHz ± 2% < 32.0 [1.26] 0.7 0.6 1” – 32 0.5 0.4 0.3 0.2 0.1 0 400 500 800 900 1000 TM-1325CL with adj backfocus IXC285AL < 32.0 [1.26] Raw Bayer output for host-based interpolation Programmable LUT (1.0 std) Shutter speed 1/30 t0 1/16,000 in 10 steps Lens mount C-mount (use >2/3” format lenses) Power 12V DC ± 10%, 360 mA (typical at 25° C) Operating temperature -10° C to 50° C Vibration 7 Grms (10 Hz to 2000 Hz) Random Shock 70 G, 11 ms, half-sine Dimensions (H x W x L) 44.5 mm x 44.5 mm x 63 mm Weight 140 g (without tripod) 1” – 32 44.5 [1.75] TM-1325CL with adj backfocus Connector Pin-out 1 9 44.5 [1.75] 2 10 7 12-Pin Connector 44.5 7 8 9 10 11 12 [1.75] VD in GND HD in NC 22.2 [0.88] INTEG/ROI NC 16.8 R5.8[0.66] [R0.23] 16.8 [0.66] < • Gain control Offset control Save settings L oad settings Report settings LUT setting and graphic display R5.8 [R0.23] (For 15 fps mode, the shutter speed doubles) canning mode selection and Option S selections Channel auto balancing Async no shutter (1/30) 16.8 [0.66] 1/16,000 1/8,000 1/4,000 1/2,000 1/1,000 1/500 1/250 8X M3 1/125 i 6.5 [0.26] pulse width control < • • • • • • • hutter control for manual async. and S pulse-width control 63.0 [2.48] 72.6 [2.86] Rear view Manual no shutter (1/30) 1/60 1/125 1/250 1/500 1/1,000 1/2,000 1/4,000 1/8,000 1/16,000 4X 18.0 [0.71] • A* *A = 17.9 ± 1.0 mm absolute8X distance M3 measured to front ofi 6.5 lens[0.26] mount (Effective flange back distance = 17.53 ± 0.5 mm) 8X M3 i 6.5 [0.26] Shutter Speed 0 1 2 3 4 5 6 7 8 9 Ordering Information Camera Lead Processing TM-1325CL (mono), TMC-1325CL (color) RoHS Compliant RM-1325CL (mono), RMC-1325CL (color) Camera parameters can be uploaded from the PC to the camera. Once these parameters are stored in EEPROMs, an instantaneous change from one setting to another can be done with a delay of few frames in between. Optional Functions Software available for download at www.jai.com Internal IR Filter Added OP3-1 Optical Filter Removal OP3-2 Strobe Output OP80 10-Bit Output OP93-1 Optional Accessories (must be ordered separately) Europe, Middle East & Africa Phone +45 4457 8888 Fax +45 4491 3252 Asia Pacific Phone +81 45 440 0154 Fax +81 45 440 0166 Visit our web site on www.jai.com Americas Phone (Toll-Free) 1 800 445 5444 Phone +1 408 383 0300 R5.8 [R0.23 < GND +12V DC GND Video out GND 44.5 [1.75] NC GUI Interface A user-friendly GUI (graphical user interface) is provided. This interface allows users to control the following functions of the TM-1325CL camera: 63.0 [2.48] 72.6 [2.86] 8X M3 i 6.5 [0.26] Bottom view 4X 18.0 [0.71] 2 3 4 5 6 A* *A = 17.9 ± 1.0 mm absolute dis *A = 17.9 ± 1.0 mm absolute distance measured to front of lens measured to front of lens mount (Effective flange back dista (Effective flange back distance = 17.53 ± 0.5 mm) 6 1” – 32 37.4 1 [1.47] 16.8 [0.66] A* 22.2 [0.88] 44.5 [1.75] 63.0 [2.48] 72.6 [2.86] 22.2 [0.88] 8 3 11 12 – 6.0 [0.23] 4X M3 X ┬ 4 5 32.0 [1.26] 44.5 [1.75] 37.4 [1.47] 22.2 [0.88] 37.4 [1.47] 4X 18.0 [0.71] Color (RMC/TMC-1325 only) Gamma 32.0 [1.26] 1” – 32 22.2 [0.88] 714 mV, 75 Ω (900 mV white clip) Camera Link (Base configuration) *A = 17.9 mea (Effe Side view – 6.0 [0.23] 4X M3 X ┬ – 6.0 [0.23] 4X M3 X ┬ 0.5 lux f=1.4 (no shutter) @ 30 fps, 4.0 lux f=1.4 (no shutter) @ 30 fps 22.2 [0.88] 44.5 [1.75] < Analog Digital 700 TMC-1325CL TM-1325 2/3" (color) 1392 (H) x 1040 (V) 4X 18.0 [0.71] Mono Color 600 TM-1325CL with adj backfocus Wave Length [nm] >50 dB Sensitivity 44.5 [1.75] 37.4 [1.47] 55.00/27.50 MHz S/N ratio Video output 0.8 < Pixel clock – 6.0 [0.23] 4X M3 X ┬ 0.9 22.2 [0.88] Synchronization Front view 1.0 I/O 26CL-02-26 digital output cable Power Cable 12P-02S Power Supply PD-12UUP (includes power connector) Company and product names mentioned in this datasheet are trademarks or registered trademarks of their respective owners. JAI A·S cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification. Active pixels TM-1325CL (monochrome) 10428 Rev D.11.20.2009 8.98mm x 6.71mm 22.2 [0.88] 2/3” progressive scan interline transfer CCD Active area < Sensor Dimensions Spectral Response TM-1325CL/TMC-1325CL Relative Response Specifications TM-1325CL with adj backfocus