Tm-1325 Cl / Tmc

Transcript

1392 x 1040 TM-1325 CL / TMC-1325 CL Progressive Scan CCD                2/3” high resolution progressive scan IT CCD imager (ICX285AL/ICX285AQ) 1392(H) x 1040(V) @ 30/15 fps 6.45 μm square pixels Compact 44 x 44 x 63 mm housing LVDS versions: order TM-1325 and TMC-1325 Digital output and analog output Maximum dynamic range control with built-in look-up table (LUT) Full frame integration for long exposures Image center partial scan (500, 250 lines) Full-frame shutter to 1/16,000 sec. Asynchronous reset, no-delay shutter with pulse-width exposure control Read-out-inhibit control for multiple-camera applications RS-232 external control Near IR sensitivity and high gain CCD output Monochrome or color www.jai.com 30/15 FPS CL Specifications for TM-1325CL/TMC-1325CL Sensor 2/3” progressive scan interline transfer CCD Active area 8.7mm x 6.9mm Active pixels 1392 (H) x 1040 (V) Cell size 6.45 μm x 6.45 μm Readout modes 1392 (H) x 1040 (V) @ 30/15 Hz (full image) 1392 (H) x 500 (V) @ 58 Hz (partial scan) 1392 (H) x 250 (V) @ 100 Hz (partial scan) < 1” – 32 0.4 0.3 0.1 0 400 500 600 700 800 TMC-1325CL TM-1325 2/3" (color) 1392 (H) x 1040 (V) 4X M3 X – 6.0 [0.23] < Vibration 7 Grms (10 Hz to 2000 Hz) Random Shock 70 G, 11 ms, half-sine Dimensions (H x W x L) 44.5 mm x 44.5 mm x 63 mm Weight 140 g (without tripod) 2 10 44.5 [1.75] 3 11 12 4X M3 X – 6.0 [0.23] 4 5 32.0 [1.26] 7 GND 16.8 [0.66] +12V DC 8X M3 GND i 6.5 [0.26] Video out GND NC 44.5 [1.75] 2 3 4 5 6 EFFECTIVE IMAGE AREA 63.0 [2.48] 72.6 [2. Bottom view 22.0 [0.87] 11.0 [0.43] [1.75] 7 VD in 8 GND 9 HD in 107.0 [0.28] NC 11 22.2 INTEG/ROI [0.88] 12 NC 1/4–20 2X M6 20.8 [0.82] 11.0 [0.43] R5.8 [R0.23] 22.0 [0.87] 16.8 [0.66] 17.9 [0.71] EFFECTIVE IMAGE AREA 63.0 [2.48] 72.6 [2.86] Shutter Speed 0 1 2 3 4 5 6 7 8 9 20.8 [0.82] Async Rear view 22.0 [0.87] [0.43] no shutter (1/30) no shutter11.0 (1/30) 16.8 [0.66] 1/60 1/16,0001/4–202X M6 8X M31/125 1/8,000 i 6.5 [0.26] 1/250 1/4,000 1/500 1/2,000 1/1,000 1/1,000 1/2,000 1/500 1/4,000 1/250 1/8,000 1/125 1/16,000 pulse width control R5.8 [R0.23] (For 15 fps mode, the shutter speed doubles) Ordering Information Camera parameters can be uploaded from the PC to the camera. Once these parameters are stored in EEPROMs, an instantaneous change from one setting to another can be done with a delay of few frames in between. Software available for download at www.jai.com Camera Lead Processing TM-1325CL (mono), TMC-1325CL (color) RoHS Compliant RM-1325CL (mono), RMC-1325CL (color) Optional Functions Internal IR Filter Added OP3-1 Optical Filter Removal OP3-2 Strobe Output OP80 10-Bit Output OP93-1 Optional Accessories (must be ordered separately) Europe, Middle East & Africa Phone +45 4457 8888 Fax +45 4491 8880 Asia Pacific Phone +81 45 440 0154 Fax +81 45 440 0166 Visit our web site on www.jai.com R5.8 [R0 1/4–20 2X M6 8X M3 i 6.5 [0.26] 4X 18.0 [0.71] Channel auto balancing canning mode selection and S Option selections 17.9 [0.71] 22.2 63.0 [2.48] [0.88] 72.6 [2.86] < • LUT setting and graphic display 44.5 [1.75] 6 Manual Report settings 17.9 [0.71] 7.0 [0.28] EFFECTIVE IMAGE AREA 1” – 32 GUI Interface Load settings 8X M3 i 6.5 [0.26] 22.2 [0.88] 8 20.8 [0.82] 12-Pin Connector 44.5 37.4 1 [1.47] A user-friendly GUI (graphical user interface) is provided. This interface allows users to control the following functions of the TM-1325CL camera: 7.0 [0.28] 9 I/O 26CL-02-26 digital output cable Power Cable 12P-02S Power Supply PD-12UUP (includes power connector) Americas Phone (Toll-Free) 1 800 445 5444 Phone +1 408 383 0300 Company and product names mentioned in this datasheet are trademarks or registered trademarks of their respective owners. JAI A·S cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification. -10° C to 50° C 1 10428 Rev B.05.11.2007 Operating temperature 37.4 [1.47] 1/4–20 2X M6 44.5 [1.75] 4X 18.0 [0.71] 12V DC ± 10%, 430 mA (typical at 25° C) 11.0 1” –[0.43] 32 < C-mount (use >2/3” format lenses) Power Connector Pin-out 22.0 [0.87] 20.8 [0.82] 16.8 [0.66] 22.2 [0.88] 37.4 [1.47] 4X 18.0 [0.71] Lens mount 32.0 [1.26] 44.5 [1.75] TM-1325CL with adj backfocus Programmable LUT (1.0 std) Save settings EFFECT IMAGE A Side view 1” – 32 Gamma Offset control 22.2 [0.88] 32.0 [1.26] Raw Bayer output for host-based interpolation Gain control 7.0 [0.28] TM-1325CL with adj backfocus 44.5 [1.75] Color (RMC/TMC-1325 only) • • • • • • • 1000 IXC285AL 4X M3 X – 6.0 [0.23] 714 mV, 75 Ω (900 mV white clip) Camera Link (Base configuration) hutter control for manual async. S and pulse-width control 900 TM-1325CL with adj backfocus Wave Length [nm] 0.5 lux f=1.4 (no shutter) @ 30 fps, 4.0 lux f=1.4 (no shutter) @ 30 fps • 44.5 [1.75] 37.4 [1.47] 0.2 22.2 [0.88] Relative Response 0.5 < Analog Digital 0.6 < Video output Mono Color 32.0 [1.26] 0.7 4X 18.0 [0.71] Sensitivity 0.8 22.2 [0.88] >50 dB 4X M3 X – 6.0 [0.23] 0.9 < 55.00/27.50 MHz S/N ratio Front view 1.0 Internal/External auto switch HD/VD, 4.0 Vp-p impedance 4.7K Ω VD = 15/30 Hz ± 2%, non-interlace HD = 15.99 /31.98 kHz ± 2% Pixel clock TM-1325CL (monochrome) < Synchronization Dimensions Spectral Response TM-1325CL/TMC-1325CL 22.2 [0.88] Specifications TM-1325CL with adj backfocus