Transcript
TMAS G 120 / G100-RF / G80 Multifunctional Access and Security Terminal Electronic identification unit for:
Attendance control Production control Access control Canteen management Car park management Self-service counter
The identification of an employee or of a process can be done using:
A magnetic badge An RFID card read from a distance A bar code Manually keying a code into the keyboard Biometric identification
G120
G80
The data of each and every transaction is controlled, saved and protected. They can be transferred to a computer via ON-LINE or OFF-LINE, direct, telematic or Ethernet connection.
Tmas comes with a keyboard which allows to link a function to every identification (ex. Canteen meal selection, connecting to a computer to query the database, production advancement notification), and to confirm the transaction either by printout or output on the display.
Tmas can furthermore pilot systems that operate in basis of a schedule or of an identification (ex. bell, turnstiles, bars).
An innovative function in respect to previous generations of clock terminals is the possibility to include biometric fingerprint identification. Fingerprints are unambiguous, irreplaceable and difficult to reproduce or to forget. Therefore they allow a much more secure control as the system is not based on something “one knows” (pin number, code, password) or something “one has” (keys, badge, smart card), but on “who one is”.
The Tmas terminal fully respects the legislative decree n°196/03 which regulates the use of biometric identification in respect of privacy laws.
G100
G 100RF
General Characteristics Graphic display 320x240 dots with automatic lighting exclusion in case of power shortage (in the presence of the battery powered backup accessory) Bidirectional magnetic swipe card reader 2° traccia (ABA) ISO standard (mod. G120 e G100) Messaging to individual or group of employees Authentec Biometric Sensor of capacitive type 9.75mm x 9.75mm (mod. G120 e G80) Number of fingerprints it can manage: o Unlimited, in the presence of the reader/writer RFID MIFARE® ISO/IEC 14443A (mod. G80) module o 5000, if the above RFID module is not present Security index: FAR (False Acceptance Rate, fingerprint not registered on terminal but recognized in error) 1/20000; FRR (False Rejection Rate, fingerprint registered on terminal but not recognized) 1/100 Password to access Parameter Settings and Biometric Terminal Management Dual colour signal (red green) of transaction Acoustic beep of attendance record acquisition Visualization of Badge Code and Service Messages Service programming via Computer On-line point-TO-point or multidrop connection Waterproof alphanumeric keyboard with 20 keys 512 Kb RAM Buffer (can store up to 8000 transactions) Backup battery to safeguard RAM data Visualization of User Logo on display (in Bitmap 320x80 pixel format) Guided visualization and selection of Entry and Exit codes Visualization of latest attendance records Clock chip with automatic leap year, firmware to manage changes from solar time to daylight savings time with possibility to program days and times in which the time changes will take place. Format day and time: ddmmyy hhmm 220 V ca 450mA power supply Management of 50 attendance codes Possibility to retransmit attendance records already downloaded Reset hardware and software of the terminal Terminal Interface RS422 or RS232 Internal bay to house “Ethernet Traccia” network interface controller Internal bay to house the modem “TMASWIN” Terminal Management Software in Windows environment Possibility to customize terminal by applying Logo sticker on the front Set up for possible parallel Interface standard Centronics Set up with 2° Serial ports RS232 to manage bar code scanner Set up for 2 external and 2 internal Outputs Set up for 2 external and 2 internal Inputs
Options
Parallel Centronics Port for external printer 2° Serial RS232 ports to manage bar code scanner Low power relay output device Optoisolated input device RFID 125KHz reader at a distance (mod. G80) Reader/Writing Module RFID MIFARE® ISO/IEC 14443A (mod. G80) Dial-up internal Modem Battery powered backup Module with Ni-Cd batteries Internal “Ethernet Traccia” network interface controller Memory expansion (512 KB module)
Tmas E100
Tmas E100 is the new interactive multifunction terminal of the TMAS product line. It has been designed to be a valuable tool in applications where the interaction between employees and the company’s information system takes place without a personal computer. The Tmas E100 terminal has an electronic unit with a large touch screen display with colour graphics, specifically designed to assist the user in autonomous and intuitive interaction with the system, providing a wide range of information. Numerous sophisticated applications can be managed with the new terminal, such as personnel access control and presence surveyor, or any other application that requires a high level of interaction. The Personnel Dept. can receive queries and provide information through the Tmas E100 terminal, such as e-mail messages and monthly attendance reports. Tmas E100 has been programmed in C/C++ to maximize customization possibilities. Additional services and applications not otherwise available in the standard version can be developed and integrated into the Tmas E100.
Technical characteristics Hardware Processor RAM Memory Flash Memory Display Audio Badge Reader Communication Connections Power Supply Dimension and Weight Environmental Values
Intel Atom N270 1.6 GHz 1 GB SDRAM 4 GB CompactFlash Type II TFT 7 ‘’ 16:9 – 800x480 pixel – 65.000 colours – Resistive Touch screen High speaker 2W Mono Magnetic bidirectional swipe reader standard ISO Traccia 2 RFID Proximity reader/writer ISO14443A MIFARE Ethernet 10/100/1000 Mbit 1 Host USB 2.0 door to connect printer, USB pen drive, etc. 1 configurable serial port RS-232/422/485 Power Supply 220 Vca Absorbed Power 1,5 A max H 270 D 125 L 245 mm Weight 2.1 Kg Functioning Temperature: 0 – 40 °C Storage Temperature: -10 – 60 °C Relative Humidity: up to 99% without condensation
Software Operating System
Optimized distribution Linux – kernel 2.6.21.7
Libraries Services
wxWidgets 2.8 FTP Server File Server Web Browser (optional) Web Server (optional)
Operating functionalities TmaxE100
Simple and intuitive user interface. Text To Speech of all the functional statuses of the terminal. Tmas E100 can be programmed so that all system messages, functional statuses, codes and badge user name and surname be given in TTS. This function allows visually handicapped employees to utilize the terminal. Internal database to record all transactions and all settings of Tmas E100. The database can be easily retrieved from the terminal in order to carry out recovery or data update operations from an offline
PC, such as export of clock-in / clock-out data, import of new personal name, update of authorization lists, etc. Tmas E100 is equipped with an internal database, able to store a vast amount of attendance records. Data acquisition can be performed selecting the badge number and/or time interval. Possibility to re-acquire the records that have been downloaded from the terminal, but that are still stored in the terminal’s internal database. Can access the monthly attendance report in PDF format through an FTP connection, where made possible by the attendance control software. Monthly attendance report can be saved onto a USB pen drive. Transactions can be saved onto a USB pen drive. Selection and user guide for up to 100 operating Codes. View latest attendance records. View personal and/or group service messages. The Personnel Dept. can send messages to the Tmas E100 terminal which will in turn be forwarded to all relevant employees following the acquisition of the next attendance record. A maximum of two messages are allowed per individual or of two for a complete employee mailing list. These messages are stored in easily accesses personal mail-boxes. A digital photo of the employee will appear on the display at every badge swipe with a TTS audio message of the employee’s name. Management of “Black/White List” authorization lists. Display can be customized with the company’s logo, using a jpeg file. Badges can be programmed with an RFID ISO14443A MIFARE proximity reader in the management section of the Tmas E100 terminal. Connection of a serial printer (optional). Software update via FTP.
