Transcript
Toddler to Twin Carriage Bed BB86983PS Toddler Bed • BB87191PS Twin Bed
WARNING:
THIS ITEM REQUIRES ASSEMBLY BY AN ADULT BECAUSE OF SMALL PARTS. CARE SHOULD BE TAKEN IN UNPACKING AND ASSEMBLY OF THIS PRODUCT.
Toddler Bed Parts: HARDWARE SET FOUND IN TODDLER BED BOX
A
G
C
(2) Side Panel Female
(2) Side Panel Male
S
(2) Side Rail Connector Straps
(1) Fabric Bin
(1) Fabric Bin Base
(1) Left Panel
(2) Headboard/Footboard Panel (headboard side view)
(1) Canopy Pole Base Left
N
(1) Canopy Pole Base Right
K L
G
(2) Side Panel Male
B
(1) Fabric Bin
(2) Headboard/Footboard Panel
F
D (2) Headboard/Footboard Panel Left Extender
(2) Side Rail Connector Straps
M
(2) Headboard/Footboard Panel Right Extender
J H
BENCH PARTS
(1) Left Panel
(1) Right Panel
I
4 x .5” DIA.
TO FULLY ASSEMBLE THE TWIN BED YOU WILL NEED
(2) Canopy Pole Top
8 x 1.5” Length
8 x .5” DIA.
(1) Seat Panel
4 x .5” DIA.
S
N (1) Fabric Bin Base
8 x .5” DIA.
28 x 1” Length
E
(1) Side Panel Extender
8 x 1.5” Length
I
(2) Canopy Pole Top
C
(2) Side Panel Female
(1) Right Panel
(1) Seat Panel
Twin Bed Parts: HARDWARE SET FOUND IN TWIN BED BOX
A
TO FULLY ASSEMBLE THE TODDLER BED YOU WILL NEED
16 x 1” Length
E
M
H
BENCH PARTS
J
(1) Canopy Pole Base Left (1) Canopy Pole Base Right
K L 2
Stickers
• Please apply all stickers on individual parts before assembly. • For best results, place individual parts on a flat surface before applying stickers and acrylic jewels.
A1
B1
B2
C1
A2 C2 (24)
(2)
(2)
(2)
(2)
E3
E2
E1
(1)
(1)
(1)
E4
(1)
E5 E6 E5
A3 C3
D1 E7 F1
(2)
(4 Jewels)
(12)
3
Canopy Drapings P
(1 Toddler Center Draping)
O
R
Q (1 Twin Center Draping)
(1 Left Side Draping)
(1 Right Side Draping)
4
1 Apply all decals A
C A1
A2
A3
E5 x 2
E5
A2 x 6
B1
C1
B2
B E
E6
E1
D
C2 C2 x 6
E5 x 2
F
E5
E
C3
E6
F
D F1
D1 E7
E4
E7
F1
D1
F1
D1
D1
E7
E2
E7
F1
E3 Alternate Headboard Decal
5
2 Assemble Bench
2A
2B
G
I
H • Make sure seat is all the way to the front and screwholes on sides line up
• Align seat with slots in bench sides • Slide into place
2C
• Turn flap down so it sits flat across the back of the seat.
2D
4 x 1”
6
3 Toddler Bed Assembly 3B C
3A
A
4 x 1”
• Insert Panel C into Panel A for both sides
• Insert Panel E latch hooks into both left/right side panel grooves • Slide downward into a fully locked position
3D
E
1
2
E
3C
4 x 1.5”
7
• Align pole top with pole base
3F
3G
J
4 x .5”
4 x 1”
3H
• Align pole base with slots in side panels on back of headboard
3I
4 x .5”
4 x 1.5”
K L
3E
• Slide into place until poles are flush with sides
8
3J
• Align bench to footboard (Panel E)
3K
9
3L
3M
PLEASE NOTE: Straps are only to keep bed sides taut. They are NOT a mattress support.
R S
R
This is NOT a screwhole. Do not use.
R
4 x .5”
• Use these screw tabs for toddler bed setup
• Align screwtab openings on straps to screwholes in sides • Use screws and washers to securely attach straps to both sides
4 x 1”
10
3N
3O Skip to Section 5 to attach canopy draping
11
4 Twin Bed Assembly • 1) Insert Panel B into Panel A for both sides
4B
• 2) Insert Panel C into Panel B for both sides
C B A
2
8 x 1”
4A
1
4D
D
4C
F E
• Insert Panel D into Panel E • Insert Panel F into Panel E
8 x 1”
12
4E
4F
1
2
• Insert Panel F latch hooks into side Panel C grooves for both sides • Insert Panel D latch hooks into side Panel A grooves for both sides
4 x 1.5”
13
• Align pole top with pole base
4H
4I
4 x .5”
4 x 1” • Align pole base with slots in side panels
4J
4K
4 x .5”
4G
• Slide into place until poles are flush with sides
4 x 1.5”
14
4L
4M
• Align bench to footboard (Panel E)
15
4N
4O
PLEASE NOTE: Straps are only to keep bed sides taut. They are NOT a mattress support.
R
S
This is NOT a screwhole. Do not use.
R R
4 x .5”
• Use these screw tabs for twin bed setup
• Align screwtab openings on straps to screwholes in sides • Use screws and washers to securely attach straps to both sides
8 x 1”
16
4P
4R
4Q
Go to Section 5 to attach canopy draping
17
5 Canopy Draping 5A
5B
J
5C
P
Q
O R
• Attach top of Drape O to top of (1st) Pole J with velcro close
• Attach middle of Drape O to top of (1st) Pole J with velcro close
• Repeat both steps to attach Drape R to (2nd) Pole J.
• Choose correct size of Center Drape P (Toddler) or Drape Q (Twin) for bed. • Attach to Drape O with velcro close. • Then attach to Drape R with velcro close. • Fluff fabric on Drapes O and R to adjust fall of fabric to finish.
18
6 Fabric Storage Bin 6A
6B N
M M
• Fully expand Fabric Bin
• Insert Bin Base (N) to stabilize.
19
20
TODDLER BED WARNING WARNING
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. The maximum user weight is 50lbs (22.7kg)
WARNING
STRANGULATION HAZARD NEVER place bed near windows where cords from blinds or drapes may strangle a child. NEVER suspend strings over a bed. NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords, around a child's neck. These items may catch on bed parts.
CAUTION
ENTRAPMENT HAZARD To avoid dangerous gaps, any mattress used in this bed shall be a full-size crib mattress at least 51 5/8 in. (1310mm) in length, 27 1/4 in. (690mm) in width, and a max thickness of 6 in. (152mm). DO NOT use this bed without a mattress.
• Failure to follow these warnings and the assembly instructions could result in serious injury or death. • The user's maximum weight shall not be greater than 50 LB (22.7 kg). • DO NOT use for infants. This toddler bed is intended for a child between 15 months and 5 years of age. • DO NOT use a water mattress with this toddler bed. • Toddler bed must have more than 12 inches of space between the toddler bed and solid objects such as a wall or dresser. Child could slide into small spaces and suffocate. ASSEMBLY • IMPORTANT! Before assembly, inspect toddler bed for damaged hardware,loose joints, missing pieces or sharp edges. • DO NOT use bed if any parts are missing or damaged. • DO NOT substitute parts. • If you are without an instruction sheet, DO NOT use this product. Call (212) 645-9033 or fax (212) 645-9032.
TWIN BED WARNING WARNING
Never use in the twin bed configuration with children younger than 2 years old. Infants who cannot get in and out of a twin bed without help can be trapped in gaps formed between the mattress and the wall or parts of the bed and suffocate. ASSEMBLY • IMPORTANT! Before assembly, inspect twin bed for damaged hardware,loose joints, missing pieces or sharp edges. • DO NOT use bed if any parts are missing or damaged. • DO NOT substitute parts. • If you are without an instruction sheet, DO NOT use this product. Call (212) 645-9033 or fax (212) 645-9032.
Care And Maintenance To clean bed frame, use only household soap or detergent and warm water. NO BLEACH.
© Disney Visit www.disneyprincess.com
21
