Transcript
www.transatmarine.com
LIGHTING
1
ELECTRICAL / ELECTRONICS
21
APPLIANCES / SANITATION
107
MAINTENANCE
137
BOATING PARTS & ACCESSORIES
153
ROPE / MOORING / ANCHORING
193
BOATS / MOTORS
223
GIFTWARE
229
RIGGING HARDWARE
247
SAILING
281
2015
Lighting
1
AQUA SIGNAL
2
LUNASEA
6
NAVISAFE
14
PLUG LIGHT
20
RIGID INDUSTRIES
18
Lighting
2
Aqua Signal
Aqua Signal 20 Series Navigation Lights
Aqua Signal 20 Series Bi-Colour Navigation Light
▪▪Polycarbonate black body/lens ▪▪Screw-in pedestal base ▪▪For vessels under 12 m (39.4 ft) ▪▪2 mile visibility ▪▪White 12V-5W ▪▪Diameter: 2.4"
▪▪Polycarbonate black body/lens ▪▪Screw-in base ▪▪For vessels under 12 m (39.4 ft) ▪▪2 mile visibility ▪▪Horizontal mount ▪▪H: 2" x W: 1.9" x D: 2.5"
Fixed
AQS 20100-7
AQS 20040-7
Parts:
Height: 4"
AQS 90496-7
Bulb 12V
Folding AQS 20180-7
Height: 18"
Bulbs: AQS 90496-7
12V/5W, inc.(pr) (BA9s)
N
Aqua Signal 27 Series Portable Navigation Lights
W E
▪▪Waterproof, floating design ▪▪Tough double O-ring seal and shock resistant rubber housing with rubber booted on-off switch ▪▪Requires 4 "AA" batteries, not included ▪▪Vessels under 7 meters ▪▪Length: 5.44" Part
Function
Mount
AQS 27400-7
Bi-Colour - Red/Green
Suction cup, C-clamp with Inflatable adapter
AQS 27440-7
All-Round - White
24” pole with clamp/ u-bracket, suction cup and inflatable adapter
Aqua Signal 25 Series Navigation Lights
25100-7
25404-7
▪▪Rigid, non-magnetic polycarbonate black body/lens and stainless steel side skirts ▪▪For vessels under 12 m (39.4 ft) ▪▪2 mile visibility Function
Light
Mount
HxWxD
AQS 25100-7
Part
Bi-Colour
Red/Green
AQS 90200-7, 10W
Bulb (12V)
AQS 90201-7, 10W
Bulb (24V)
Vertical
2.9" x 2.5" x 2.28"
AQS 25200-7
Side Light - Starboard
Green
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.9" x 2.5" x 2.28"
AQS 25300-7
Side Light - Port
Red
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.9" x 2.5" x 2.28"
AQS 25400-7
Masthead
White
AQS 90200-7, 10W
AQS 90201-7, 10W
Mast
2.9" x 2.5" x 2.28"
AQS 25500-7
Stern
White
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.9" x 2.5" x 2.28"
AQS 25000-7
All-Round
White
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.95" x 2.4"
AQS 25404-7
Masthead/Deck
White
AQS 90203-7 †, 10W AQS 90470-7, 10W
Mast
5.45" x 7" x 2.4"
N/A
† Bulb for newer (post 2011) 25 series lights. A visual identification of the fixture bulb is neccessary for proper replacement.(See spare bulbs below) Parts: AQS 25410-1 AQS 25902-1 AQS 25903-1 AQS 90470-7
Masthead lens, black S-25 deck bracket Mast bracket 12V/20W, ser-25 bay halogen (BA9s) 90200-7
90203-7
3
Aqua Signal Aqua Signal 32 Series Navigation Lights ▪▪Quicfit lights allow easy dismantling for transport or storage ▪▪Polycarbonate, seawater resistant, UV protected, non-corrosive, non-magnetic, shock resistant ▪▪For vessels under 20 m (65') ▪▪2 mile visibility 32410-7
Style
Description
Lighting
Part #
32706-7
Size
AQS 32410-7**
Masthead/Anchor
White, 4 W mast, 1.5 W anchor
4" x 3.8"
AQS 32706-7**
Tri-Colour/Anchor
Red/Green/White, 4 W mast, 1.5 W anchor
6.1" x 3.8"
** Limited Quantities
W
E N
Aqua Signal 33 Series Navigation Lights ▪▪Completely sealed and waterproof with IP66, IP67, IP68 testing and certification ▪▪Absolutely maintenance free ▪▪Long lifetime and low power consumption (0.18A) ▪▪Nearly identical footprint to series 31 & 32 generation LED's ▪▪12 volt DC applications ▪▪For vessels under 20 meters (65.6') ▪▪2 mile visibility ▪▪Horizontal mount ▪▪H: 2" x W: 2.68" x D: 1.7" ▪▪Bi-colour H: 1.18" x W: 3.1" AQS 33202-7 Starboard AQS 33302-7 Port AQS 33502-7 Stern AQS 33100-7 Bi-colour
Aqua Signal 34 Series Navigation - Quicfit Light ▪▪Red/Green/White 1.9W, mast/anchor 1W ▪▪For vessels under 20 m (65.6 ft.) ▪▪Visibility: 2 nautical miles, masthead 3 miles ▪▪Volts: 12 or 24V Draw: 0.18-0.54A @ 12V ▪▪Completely sealed and waterproof ▪▪Tested and certified for electromagnetic interference ▪▪Vertical mount ▪▪Case Material: Polycarbonate ▪▪Fits 40 series mounts ▪▪H: 5.5" x Dia: 3.5" ▪▪Warranty: 3 years
33202-7
33302-7
33502-7
AQS 34706-7
33100-7
Aqua Signal 40 Series Navigation Lights ▪▪Rigid, nonmagnetic polycarbonate body/lens and stainless steel side skirts ▪▪For vessels under 20 m (65.6 ft.) ▪▪2 mile visibility 40100-7
Part
40700-7
40000-7
40400-7
Function
Description
12V Bulb
24V Bulbs
AQS 40100-7
Bi-Colour
Red/Green 25W
ANC 529340, 25W
ANC 529341, 25W
AQS 40000-7
All-Round
White, 10W
ANC 529343, 10W
ANC 529341, 25W
33600-7
Mount
Housing
HxWxD
Vertical
Black
5.1” x 3.5” x 3.1”
Horizontal
Black
4.98" x 3.5"
AQS 40400-7
Masthead
White, 10W
ANC 529343, 10W
ANC 529344, 10W
Vertical
Black
5.1” x 3.5” x 3.1”
AQS 40600-7
Tri-Colour
Red/Green/White, 25W
ANC 529340, 25W
ANC 529341, 25W
Deck/Mast
Black
4.98" x 3.5"
AQS 40700-7
Tri-Colour/ Anchor
Red/Green/White, 25-10W
ANC 529340, 25W ANC 529343, 10W
ANC 529341, 25W ANC 529344, 10W
Deck/Mast
Black
8.7" x 3.5"
AQS 42411-1**
Masthead/ Anchor
White, 25W & 10W
ANC 529340, 25W ANC 529343, 10W
ANC 529341, 25W ANC 529344, 10W
Deck
White
9.1” x 3.5”
** Limited Quantities Parts: AQS 40710-1 AQS 40030-1
Tri anchor lens All-Round clear lens only
4
Aqua Signal
Aqua Signal 40 Sailboat Navigation Lights - Quicfits
40706-7 40806-7
Lighting
▪▪Equipped with Aqua Signal Quicfits system for easy dismantling for the purpose of transport and winter storage ▪▪Rigid, nonmagnetic polycarbonate body/lens and stainless steel side skirts ▪▪For vessels under 20 m (65.6 ft.) ▪▪2 mile visibility
Part
Function
Description
12V Bulb
40606-7
24V Bulb
Mount
Housing
HxWxD
ANC 529341, 25W
Deck/Mast
Black
6.5" x 3.5"
AQS 40606-7
Tri-Colour/ Anchor
Red/Green/White, 25W
ANC 529340, 25W ANC 529343, 10W AQS 90005-7, 10W
AQS 40706-7
Tri-Colour/ Anchor
Red/Green/White, 25-10W
ANC 529340, 25W ANC 529343, 10W AQS 90005-7, 10W
ANC 529341, 25W ANC 529344, 10W
Deck/Mast
Black
10.35" x 3.5"
AQS 40806-7
Tri-Colour/ Anchor/Strobe
Red/Green/White, 25-10-8W
ANC 529340, 25W ANC 529343, 10W AQS 90005-7, 10W
ANC 529341, 25W ANC 529344, 10W
Deck/Mast
Black
10.35" x 3.5"
Parts: AQS 40710-1
Tri-Colour lens
Aqua Signal 41 Series Navigation Lights ▪▪Powerboat/Sailboat 12V, 25W/10W ▪▪Rigid polycarbonate black body/lens ▪▪Comes with self adhesive gasket used as a drilling template ▪▪Screws included ▪▪For vessels under 20 m (65.6 ft.) ▪▪Visibility: 2 nautical miles, masthead 3 miles Part
41100-7
Function
Light
AQS 41100-7
Bi-Colour
Red/Green
ANC 529340, 25W
AQS 41200-7
Side Light - Starboard
Green
AQS 41300-7
Side Light - Port
AQS 41400-7
41300-7
41400-7 41500-7
Size HxWxD
ANC 529341, 25W AQS 90003-7, 25W
Vertical
4.1" x 3.6" x 3.2"
ANC 529340, 25W
ANC 529341, 25W AQS 90003-7, 25W
Horizontal
4.1" x 3.6" x 3.2"
Red
ANC 529340, 25W
ANC 529341, 25W AQS 90003-7, 25W
Horizontal
4.1" x 3.6" x 3.2"
Masthead
White
ANC 529343, 10W AQS 90005-7, 10W
ANC 529344, 10W
Vertical
4.1" x 3.6" x 3.2"
AQS 41404-1
Masthead/Foredeck
White
ANC 529343, 10W AQS 90005-7, 10W
ANC 529344, 10W
Vertical
8.3" x 5.3"
AQS 41500-7
Stern
White
ANC 529343, 10W AQS 90005-7, 10W
ANC 529344, 10W
Vertical
4.1" x 3.6" x 3.2"
Spare Bulbs: AQS 90002-7 AQS 90005-7 AQS 90177-7 AQS 90234-7 AQS 90282-7
12V/25W, double contact index base 12V/10W, series 40 halogen 12V/10W series 15 festoon 12V/20W series 25 halogen 12V/5W series 15 halogen
Spare Parts: AQS 41410-1
Masthead/stern replacement lens
24V Bulb
41404-1
Mount
Aqua Signal Bulbs and Spare Parts
12V Bulb
41200-7
Aqua Signal Watertight Docking Lights Stainless steel, watertight (IP67), shock-resistant, non-corrosive and non-magnetic halogen lights (bulbs included). ▪▪2-wire mount ▪▪Watertight gaskets ▪▪50W, 12V ▪▪Fastners included ▪▪4.25" x 7.75" AQS 85104-7 Pair
Parts: Use any MR16 style replacement bulb
Aqua Signal
5
Aqua Signal Gaborone Interior Light
W E
▪▪Flexible arm allows for wide range of motion throughout chart table spaces. Equipped with both white and red LED light to maintain night vision. ▪▪Housing material: 12” flexible steel tubing with black plastic mounting bracket ▪▪Voltage: 12V ▪▪Wattage: 9W (white), 4W (red) ▪▪Length: 39.7 cm ▪▪Fasteners included AQS 16500-7
AQS 16541-7
Aqua Signal Bamako Overhead Light
Aqua Signal Exterior Floodlght
▪▪Round headliner light ▪▪Can be surface mounted or recessed into headliner for flexibility ▪▪Housing is ABS plastic, with chrome plastic finish ▪▪Utilizes 12 LED warm white diodes ▪▪12 volt, 12 watt, 0.20 amp ▪▪3.25” diameter ▪▪Fasteners included
▪▪6" oval 60 LED deck light ▪▪Low amp draw: 12V, 0.4 amps ▪▪Swivel mount ▪▪High strength plastic chrome housing ▪▪Powder coated aluminum bracket ▪▪6-3/8" x 2-1/4" AQS 86500-7**
**Limited Quantities
AQS 16520-7
Aqua Signal Maputo Cabin Lights ▪▪Multipurpose light ▪▪White plastic construction with a clear lens ▪▪Has 3-position rocker switch to control both red and/or white LED lights ▪▪16” x 4.45” x 1” ▪▪Surface mounted ▪▪12 volt, 0.50 amps AQS 16530-7 Red/white AQS 16531-7 White/white
Aqua Signal Colombo Dome Light ▪▪Three position rocker switch (On/Off/Red) ▪▪21 "Warm" white & 9 red LED's ▪▪Low amp draw: 0.14 amp White; 0.08 Red ▪▪12VDC ▪▪5-1/2" x 1-1/16" AQS 16601-7
Aqua Signal Vertical Watertight Plug Connect Can also be used for accessories on the mast, for easy connection of conductors when mast is stepped or removed. ▪▪5-pin horizontal plug connector ▪▪Polycarbonate, shock resistant, non-corrosive, nonmagnetic, seawater resistant ▪▪4.06” x 1.73” AQS 392800-2
Aqua Signal Horizontal Watertight Plug Connect Can also be used for accessories on the mast, for easy connection of conductors when mast is stepped or removed. ▪▪5-pin horizontal plug connector ▪▪Polycarbonate, shock resistant, non-corrosive, nonmagnetic, seawater resistant ▪▪4.09” x 2.24” AQS 80100-7
Stainless steel
Aqua Signal Wireless Remote System Aqua Signal Vienna Multi-Purpose Light ▪▪White plastic construction ▪▪Push lens, on/off switch ▪▪Surface or flush mount ▪▪Amp draw: 6 watt ▪▪12VDC ▪▪W: 5” x H: 3” x D: 1” ▪▪Fasteners included AQS 16610-7
A low cost assurance for late night boarding. With an operating range of 50’ you can control a light for entrance/exit safety. ▪▪Weatherproof receiver ▪▪Floatable transmitter fob ▪▪Works on 12V applications ▪▪Switches a max. of 10 amps AQS 17100-7
Lighting
▪▪Warm white light for living and work spaces ▪▪Includes illuminated switch for easy switching in dark areas ▪▪Dimensions L: 15.25" x W: 2.75" x D: 0.875" ▪▪Housing made from aluminum and white plastic ▪▪12/24V ▪▪Low amp draw 0.36 amp @12V
N
Aqua Signal Malabo Surface Mount Light
The World’s Most Advanced Lighting Functional & Eco-Friendly Lunasea Lighting's technology uses revolutionary microprocessor controlled circuitry that is based on 25 years of research and development. These systems provide energy-efficient, dimmable lighting for the marine industry.
LED Fixtures
LLB-28
Colregs Certified
LED Lighting and Accessories:
• Natural Illumination • More Light with Less Power • Direct Replacements for Halogen Fixtures • Multi-Function Switches • 100% Dimming Capability
LED Navigation Lights Colregs Certified
Engine Room Light - Ignition Proof:
• 1400 Lumens of soft flood light ths is only .75 inches thick. • Available in White or White/Red, White/Blue.
“NEW” 1400 Lumen Ignition Proof
Lunasea Lighting's state of the art design systems are easy to install and easy to upgrade. Best of all, they offer top-value lighting solutions that will meet or exceed your expectations.
Slim Line Bar Light
www.LunaseaLighting.com LED Floodlights and Spreader Lights
Courtesy Light
Lunasea N
Lunasea G4 Bulb
7
W E
Lunasea G4 Bulbs
▪▪Water tight Silicone Encapsulated G4 LED ▪▪Large on light but soft on the eyes ▪▪Takes up only 15 x 43mm of space ▪▪Equal to a 20W incandescent ▪▪12VDC ONLY ▪▪3 watt
LUN LLB-21TC-21-00 Side pin, Cool White, 190 lumen, each LUN LLW-21TC-21-00 Side pin, Cool White, 190 lumen, 10 bulk
LUN LLB-21HC-61-00 LUN LLB-21HW-61-00
LUN LLB-21TW-21-00 Side pin, Warm White, 170 lumen, each LUN LLW-21TW-21-00 Side pin, Warm White, 170 lumen, 10 bulk
Lunasea G4 Bulbs
LUN LLB-21UC-21-00 Back pin, Cool White, 190 lumen, each LUN LLB-21UW-21-00 Back pin, Warm White, 170 lumen, each LUN LLW-21UW-21-00 Back pin, Warm White, 170 lumen, 10 bulk
▪▪15 LED ▪▪Bottom pin ▪▪1.3 watt ▪▪10-30VDC LUN LLB-21FW-61-00 LUN LLW-21FW-61-00
Lunasea G4 Bulb Warm White, 89 lumen, each Warm White, 89 lumen, 10 bulk
▪▪Side pin ▪▪Switch between 12 warm white & 3 red ▪▪10-30VDC
Lunasea G4 Bulb
LUN LLB-21V3-81-AS
▪▪18 LED ▪▪Bottom pin ▪▪3.5 watt ▪▪10-30VDC
LunaSea Adaptor Bases
LUN LLB-21EW-21-00
▪▪1/pkg Warm White, 255 lumen
Lunasea G4 Bulb
▪▪21 LED ▪▪High output with a buck regulator circuit ▪▪Excellent viewing angles ▪▪3.2 watt ▪▪10-30VDC Warm White, 92 lumen
Lunasea G4 Bulbs
LUN LLB-26EC-21-00
Cool White, 288 lumen
LUN LLB-26EW-21-00
Warm White, 252 lumen
Lunasea Mini BA9S Bulbs
▪▪9 LED ▪▪G4 side pin ▪▪120° viewing angle ▪▪1.2 watt ▪▪10-30VDC LUN LLB-216C-21-00 LUN LLB-216W-21-00
BA15S Single Contact Base to G4 BA15D Double Contact Base to G4 BAY15D Indexing Dual Contact Base to G4 E26 Base to G4 or MR16
Lunasea Bayonet BA15D Bulbs
▪▪3 LED ▪▪G4 back pin ▪▪OD: of 24mm (.95 inch) ▪▪40,000 hour life ▪▪1.8W ▪▪10-30VDC LUN LLB-214W-21-00
LUN LLB-44AG-01-00 LUN LLB-44BG-01-00 LUN LLB-44DG-01-00 LUN LLB-44EE-01-00
▪▪6 LED ▪▪360° LUN LLB-246C-61-00 LUN LLB-246W-61-00
Cool White, 60 lumen Warm White, 55 lumen
Cool White, 130 lumen Warm White, 120 lumen
Lunasea Mini T10 Wedge Bulb ▪▪15 LED ▪▪360° ▪▪10-16VDC, 1.3 watt ▪▪High output with a buck regulator circuit LUN LLB-23FC-61-00 LUN LLB-23FW-61-00
Cool White, 93 lumen Warm White, 89 lumen
Lighting
Cool White, 200 lumen Warm White, 200 lumen
▪▪10 LED ▪▪G4 side or back pin ▪▪2.0 watt ▪▪10-30VDC
Lighting
8
Lunasea
Lunasea Bayonet BA15S / BA15D Bulbs
Lunasea Festoon Bulbs
▪▪9 LED ▪▪10-30VDC, 2 watt ▪▪Can be double-sided taped into place
▪▪12 LED ▪▪360° viewing angle ▪▪40,000 hour life ▪▪1 watt ▪▪10-30VDC
LUN LLB-229R-21-00 LUN LLB-229W-21-00
Red, BA15S Warm White, BA15S, 149 lumen
LUN LLB-269R-21-00 LUN LLB-269W-21-00
Red, BA15D Warm White, BA15D, 149 lumen
Lunasea Bayonet BA15D Bulbs ▪▪18 LED bulb with cover is for general purpose use ▪▪Low energy consumption compared with incandescent bulbs ▪▪Wide 360 degree viewing angle ▪▪10-30VDC, 1 watt
LUN LLB-18LC-21-00 LUN LLB-18LW-21-00 LUN LLB-18LR-21-00 LUN LLB-19LW-21-00
Lunasea Festoon Bulbs
LUN LLB-26FC-21-00
Cool White, 105 lumens, each
▪▪9 LED ▪▪Wide 270° viewing angle ▪▪50,000 hour life ▪▪10-30VDC, 2 watt ▪▪42mm
LUN LLB-26FW-21-00 LUN LLW-26FW-21-00
Warm White, 75 lumens, each Warm White, 75 lumens, 10 bulk
LUN LLB-189C-21-00 LUN LLB-189W-21-00
Lunasea Bayonet BA15S Bulbs
Lunasea Barrel Bulb
▪▪18 LED bulb with cover is for general purpose use ▪▪Low energy consumption compared with incandescent bulbs ▪▪Wide 360 degree viewing angle ▪▪10-30VDC, 1 watt
▪▪30 LED ▪▪Festoon dimpled ▪▪360° viewing ▪▪10-30VDC, 3.25 watt
LUN LLB-22FC-21-00 LUN LLB-22FW-21-00
Cool White, 105 lumen Warm White, 75 lumen
Lunasea Festoon Bulbs
LUN LLB-31HC-71-00
Cool White, 160 lumens Warm White, 141 lumens
Cool White, 210 lumen
Lunasea MR11 Bulb ▪▪10 LED ▪▪120° viewing angle ▪▪50,000 hour ▪▪10-30VDC, 2.2 watt
▪▪4 LED ▪▪Wide 120° viewing angle ▪▪10-30VDC, .07 watt ▪▪Length: 31mm LUN LLB-202C-21-00 LUN LLB-202W-21-00
Cool White, 42 mm, 84 lumens Warm White, 42 mm, 60 lumens Red, 42 mm Warm White, 37 mm, 60 lumens
LUN LLB-11TW-61-00 Cool White, 72 lumen Warm White, 60 lumen
Lunasea Festoon Bulbs ▪▪6 LED ▪▪Wide 120° viewing angle ▪▪40,000 hour life ▪▪10-30VDC, 1.5 watt LUN LLB-186C-21-00 Cool White, 107 lumen, 42mm, each LUN LLB-186W-21-00 Warm White, 97 lumen, 42mm, each LUN LLW-186W-21-00 Warm White, 97 lumen, 42mm, 10 bulk LUN LLB-196W-21-00 Warm White, 97 lumen, 37mm, each
Warm White, 140 lumen
Lunasea MR16 Bulb ▪▪3 LED ▪▪External aluminum housing with internal copper heat conductor ▪▪12VDC, 5 watt LUN LLB-16NW-61-00
Warm White, 290 lumen
9
Lunasea
Natural White, 850 lumen
N W E
▪▪Remote phosphor technology ▪▪7W, IP20 E26/27 screw base ▪▪Single high power LED, warm white bulb ▪▪All glass cover ▪▪360 degree viewing angle ▪▪50,000 Hour Life ▪▪12VDC ONLY LUN LLB-48EP-21-00
Warm White, 540 lumen
Lunasea E26 Screw Bulb ▪▪5W, IP20 E26/27 screw base 6 LED warm white bulb ▪▪Replaces 40W incandescent, saving 80% energy ▪▪360 degree viewing angle ▪▪380 Lumens ▪▪50,000 Hour Life ▪▪12VDC ONLY ▪▪Aluminum base and plastic covering LUN LLB-48EW-01-00
Warm White, 420 lumen
NEW Improved Design Now Smaller with Excellent Viewing Angles More Intensity with Superior Lumens
▪▪Rated at 2 nautical miles ▪▪Encapsulated to completely protect from the elements ▪▪High output with a precision buck regulator circuit ▪▪Keeps working if one of the LED's should fail ▪▪Aqua Signal 40 or 41 series replacements ▪▪Excellent viewing angles ▪▪10-30VDC, 2 watt ▪▪Lifetime Warranty
Shown Installed
Lunasea E26 Screw Bulb
Lunasea Navigation Single Colour Bulbs
LUN LLB-28NG-24-SD LUN LLB-28NR-24-SD LUN LLB-28NW-24-SD**
Green, BA15D Red, BA15D White, BA15D
LUN LLB-28NG-24-SY LUN LLB-28NR-24-SY LUN LLB-28NW-24-SY**
Green, BAY15D Red, BAY15D White, BAY15D
**Certified USCG COLREG 72 & ABYC-A16
Lunasea Navigation Tri-Colour Bulb Three individual precision buck regulator circuits. If by a rare chance one of the LEDs fails, it will continue to drive the remaining LEDs with flawless control. This is especially important in fixtures that are hard to access. ▪▪Rated at 2 nautical miles ▪▪Encapsulated to completely protect from the elements ▪▪High intensity, superior lumen maintenance ▪▪Aqua Signal 40 or 41 series replacements ▪▪Excellent viewing angles ▪▪10-30VDC, 2 watt ▪▪Lifetime Warranty LUN LLB-28NT-24-00
BAY15D
Lunasea Navigation Bi-Colour Bulbs Two individual precision buck regulator circuits. If by a rare chance one of the LEDs fails, it will continue to drive the remaining LEDs with flawless control. This is especially important in fixtures that are hard to access. ▪▪Rated at 2 nautical miles ▪▪Encapsulated to completely protect from the elements ▪▪High intensity, superior lumen maintenance ▪▪Excellent viewing angles ▪▪Aqua Signal 40 or 41 series replacements ▪▪10-30VDC, 2.5 watts ▪▪Lifetime Warranty ▪▪*Note: LLB-28NB24-10 is for inverted fixtures (flipped 180°) LUN LLB-28NB-24-00 LUN LLB-28NB-24-10
BAY15D, series 40 BAY15D, series 41
Lighting
LUN LLB-55NN-81-00
W E
Spreader/Foredeck LED offers superior light output, long life and requires only 13W of power. It's 38 degree beam places the light where you want it. Replaces 50W sealed beam with extra light to spare having the equivalent light output of 75W. ▪▪12 / 24VDC, 13 watt ▪▪IP67 waterproof
N
Lunasea Par 36 Replacement Bulb
Lighting
10
Lunasea
Lunasea Navigation Festoon Bulbs
Lunasea LED Recessed Lights
▪▪Rated at 2 nautical miles ▪▪Encapsulated to completely protect from the elements ▪▪High output with a precision buck regulator circuit ▪▪Keeps working if one of the LED's should fail ▪▪Excellent viewing angles ▪▪10-30VDC ▪▪Lifetime Warranty on 0Z series
▪▪Drop in replacement for 35-40W halogen lights ▪▪Stainless 3.45", removable bezel ▪▪Dimmable ▪▪2.5” cut out, Depth: .55" ▪▪12, 24 and 32VDC LUN LLB-46WR-21-SS LUN LLB-46WW-21-SS
LLB-189W-21-0Z
LUN LLB-189G-21-0Z LUN LLB-189R-21-0Z LUN LLB-189W-21-0Z
Green, 42mm Red, 42mm White, 42mm
LUN LLB-189B-21-00
Red/Green, 42mm
LUN LLB-319G-71-0Z LUN LLB-319R-71-0Z LUN LLB-319W-71-0Z LUN LLB-319B-71-00
Green, 43mm, 2-dimple Red, 43mm, 2-dimple LLB-319G-71-0Z White, 43mm, 2-dimple Red/Green, 43mm, 2-dimple
Lunasea Dome Lights
W
E
N
Lunasea Anchor Navigation Lights
▪▪5.5" or 6-3/4" diameters ▪▪Brushed nickel or chrome finish ▪▪High/low or white/red light switch ▪▪High intensity ▪▪120 degree viewing angle ▪▪10-30VDC ▪▪White (3 watt)/Red (1 watt) switched LUN LLB-10WR-21-BN LUN LLB-10WR-21-CR
5.5" Nickel, Warm White/Red 5.5" Chrome, Warm White/Red
LUN LLB-07WR-21-CR
6-3/4" Chrome, Warm White/Red
▪▪High (6 watt)/low (3 watt) switched LUN LLB-10WW-21-BN LUN LLB-10WW-21-CR
5.5" Nickel, Warm White, high/low 5.5" Chrome, Warm White, high/low
LUN LLB-07WW-21-BN LUN LLB-07WW-21-CR
6-3/4" Nickel, Warm White, high/low 6-3/4" Chrome, Warm White, high/low
Lunasea Cabin Wall Light
E
N W
▪▪Tri-colour/Anchor/Strobe and Anchor/Strobe ▪▪For vessels under 20 meters (65.6') ▪▪2 mile visibility ▪▪COLREG Certified ▪▪Features emergency strobe and auto daylight turnoff for anchor ▪▪Made of machined aluminum, 140 grams (4.9 ounces) ▪▪Waterproof connector is just 0.38" wide for easy cable routing ▪▪State-of-the-art EMI circuitry this light will not affect your VHF equipment ▪▪Glass lens assures excellent light transmission ▪▪Unit is hard anodized to withstand saltwater environments ▪▪Removable bird spike to accept a windex ▪▪Easy two or three wire installation ▪▪Voltage range: 10-30VDC ▪▪Power consumption: 4 watt ▪▪Height: 3.1" (4.6" with spike) x Dia: 2.5" LUN LLB-53BK-81-00 Tri-light/anchor/strobe LUN LLB-53BA-81-00 Anchor/strobe light only
3 / 1 watt, Warm White / Red light 3 / 6 watt, Warm White light
Built-in touch dimming switch also produces a soothing blue glow, simply touch the switch and hold until you reach the desired lighting. ▪▪Crystal clear acrylic face ▪▪Polished aluminum ▪▪4.5W, 4" x 3.5" ▪▪12 VDC, 3 watt LUN LLB-33BW-81-OT
Warm White
E N
Lunasea Cabin Wall Light
W
Built-in touch dimming switch also produces a soothing blue glow, simply touch the switch and hold until you reach the desired lighting. ▪▪4.5 watt wall fixtures put out the light ▪▪Crystal clear acrylic face ▪▪Polished aluminum ▪▪3" diameter ▪▪12 VDC, 4.5 watt LUN LLB-33AW-81-OT
Warm White
Lunasea
11
N W E
Lunasea Wall Mount Touch Dimming Lights
LLB-33EW-81-OT
3 watt wall fixtures put out the light! Built-in touch dimming switch also produces a soothing blue glow. The main LED produces a warming light that will really light your cabin or dim to read by. Simply touch the switch and hold until you reach desired lighting. ▪▪Brushed nickel finish ▪▪Warm white ▪▪12VDC, 3 watt LUN LLB-33JW-81-OT LUN LLB-33LW-81-OT LUN LLB-33RW-81-OT LUN LLB-33EW-81-OT
Lunasea Indoor/Outdoor Wall Lamp ▪▪Spot light output of 25 degrees ▪▪Uses only 3 watts ▪▪Aluminum finish ▪▪6/24VDC ▪▪3-1/2” from mount: Head: 2-1/2” long x dia: 2" ▪▪Base diameter: 1-3/16"
LUN LLB-57WW-81-00 Warm White LUN LLB-571B-81-00 Blue
Lunasea Multi-Purpose Light Bars ▪▪Stylish modern design with aluminum construction ▪▪Super bright, up to 50,000 hour life ▪▪12” uses only 5W; 24” uses 10W ▪▪Includes in-line switch ▪▪12" dimensions: 12" x .75" x .5" ▪▪24" dimensions: 24" x .75" x .5" ▪▪10-30VDC LUN LLB-32CC-71-00 LUN LLB-32CW-71-00
12", Cool White, 408 lumen 12", Warm White, 360 lumen
LUN LLB-32YW-71-00
24" Warm White, 816 lumen
6" Daisy Cable ▪▪Allows light bars to run in series (max 3 lights) LUN LLB-32AH-01-00
Cool light
E
N
LUN LLB-35KC-81-00**
A courtesy light that is stylish, compact and easy to install. The 316 stainless steel IP67 design lets you mount either inside or out. Included inline driver provides continuous light from 10-40VDC. ▪▪60 degree spread ▪▪Flush mount, 28mm diameter ▪▪1M (3 Ft) cable ▪▪Dimmable
W
** Limited Quantities
Lunasea Chart Light ▪▪Red (1W) and warm white 3 (W) light in one ▪▪Built in switch ▪▪Stalk length: 18" x base dia: 2.8" x head dia: 2.2" ▪▪12, 24 and 32VDC LUN LLB-49WR-21-CR
Lighting
LLB-33LW-81-OT
W E
LLB-33RW-81-OT
LLB-33JW-81-OT
N
Lunasea Courtesy Lights
Lunasea Light Bars ▪▪Only 8mm thick ▪▪Can be flush or adjustable mounted ▪▪120°, IP20 ▪▪12VDC, 4 watt ▪▪300mm /11.8" ▪▪Includes: Light Bar, Touch Dimmer and Power Cable LUN LLB-32DW-01-00
3000K Warm White, 280lumen
Extender Light Bar ▪▪Double the length with the LLB-32DW-01-AX ▪▪Includes: Light Bar, Power Cable and End-to-End Extension LUN LLB-32DW-01-AX
Lunasea
Lunasea IP68 Strips
Lunasea Utility Light
▪▪Flexible & waterproof (IP68) ▪▪Viewing angle: 120° ▪▪Cut to length ▪▪12VDC ▪▪7.2 watt/meter
▪▪Lightweight ▪▪Natural white light ▪▪432 lumens ▪▪12 & 24 volt ▪▪4 watt ▪▪Flush mount, W: 4.8 cm x L: 16.5 cm x H: 2.4 cm ▪▪On/Off switch with memory
R/G/B, 2 meter Red, 2 meter Red, 5 meter White, 2 meter White, 5 meter
W E
LUN LLB-453M-01-02 LUN LLB-453R-01-02 LUN LLB-453R-01-05 LUN LLB-453W-01-02 LUN LLB-453W-01-05
N
Lighting
12
LUN LLB-01WD-81-00
Lunasea Titan Cold Cathode Fluorescent Light
Lunasea Indoor Remote Controller
▪▪Built-in dimmer with memory ▪▪Environmental friendly ▪▪Energy efficient ▪▪Nightlight feature uses virtually no power ▪▪Long life: 30,000 hours, replaceable tubes ▪▪Easy Snaplok installation ▪▪Size: 4.5" L x 7" W x .88" H ▪▪10-30VDC @ 295 MA (4 Watts), 4100K Natural White
▪▪CT312-IR Multifunction RGB LED controller with IR remote ▪▪11 mode/32 level brightness control ▪▪Remote functional to 10 meters ▪▪12/24VDC ▪▪Output power: 4 amps per channel ▪▪90 mm x 70 mm x 28mm
LUN LLB-04W0-01-00**
** Limited Quantities
LUN LLB-45-AR-08-01
Lunasea Outdoor Remote Controller
Lunasea Titan Narrow Mount Cold Cathode Fluorescent Light
▪▪RGB IP65 Outdoor multifunction controller w/ Touch remote ▪▪Input 12/24VDC ▪▪Output Power: 6 amp each channel ▪▪On/Off, 16 colour patterns, 50 level brightness control ▪▪Size: L: 191 x W: 55.5 x H: 46.5 mm
▪▪Longitudinal Diffuser prizm for clean, even lighting ▪▪Built-in dimmer with memory ▪▪Replaceable Duotube fluorescent bulb features two tubes enclosed in one cylinder ▪▪Nightlight feature uses virtually no power ▪▪Environmental friendly ▪▪Energy efficient ▪▪Long life: 30,000 hours ▪▪Easy Snaplok installation ▪▪Size: 13.25" L x 1.5" W x .92" H ▪▪12VDC @ 810 MA (10 Watts), 4100K Natural White
LUN LLB-45AR-08-OD
** Limited Quantities
Lunasea Calypso Cold Cathode Fluorescent Lights
Use as the main lighting source in the galley, salon or where you want serious light output. Very thin design at only 24 mm thick, surface mountable and easy-to-install. ▪▪Built-in dimmer with memory ▪▪Ultra high light output ▪▪Four white replaceable tubes ▪▪Environmental friendly ▪▪Energy efficient ▪▪Long life: 30,000 hours vs. 6,000 hours standard CFL ▪▪Size: 14" L x 5.41" W x .93" H ▪▪12-24VDC (16 watts) LUN LLB-02W0-01-00 LUN LLB-02W0-01-30
Natural White, 4200K Warm White, 3000K
▪▪Nightlight built in switch lets you know what color is set and allows changing red and white before turning on ▪▪Nightlight feature uses virtually no power LUN LLB-02WR-01-00
Natural White/Red light
W
LUN LLB-17PA-11-00
LUN LLB-05W0-01-00**
E N
This low voltage, fully potted, waterproof converter protects your LED lights from overloading, over-current and over-heating. ▪▪Output current: 3 amp ▪▪Output power: 36 watts ▪▪Conversion efficiency: 96% ▪▪Output ripple: 50mV (MAX) 20M-bandwidth ▪▪Full load temperature rise: 50C ▪▪Load regulation: +/- 1% ▪▪Voltage regulation: +/- 2% ▪▪Operating temp: -40C to +85C ▪▪Size: 58 x 40.5 x 22mm ▪▪Weight: 93g
W
E
N
Lunasea 24/12 VDC Converter
Lunasea N W E
Lunasea Ignition Proof Engine Room/Utility Light
Lunasea Exterior Floodlight ▪▪Hard anodized & white varnished ▪▪900 lumens ▪▪6' power cable ▪▪H: 3.38" x W: 4.5" x D: 3.5" LUN LLB-355C-01-10
12VDC, 10W
Lunasea Exterior Floodlights
Lunasea Hi-Intensity Spotlights
LUN LLB-35MC-01-10 LUN LLB-35MC-51-10
N
LUN LLB-51WO-91-00
▪▪Hard anodized & white varnished ▪▪4,500 lumens ▪▪6' power cable ▪▪H: 7.875" x W: 9" x D: 5.875" W E
Lunasea Spreader Light ▪▪11 watt high output spreader light ▪▪Aluminum construction with a Alodine and white baked Urethane finish ▪▪12, 24, 32 VDC, 11 watt ▪▪Daylight white LEDs (1160/550 Lumen) ▪▪IP65 compliant protection ▪▪Built-in light sensor (Auto-off during daylight) ▪▪Fully dimmable ▪▪L: 7-1/4" x H: 2-1/4" x D: 1-1/8" ▪▪Fasteners: #6 LUN LLB-472W-21-10
4500K, Natural White
W
20 degree beam 40 degree beam
E
LUN LLB-503N-91-00 LUN LLB-503W-91-00
12/24VDC, 50W 85-265VAC, 50W
N
The Extreme Beam spot light produces immense intensity within a compact stylish package. ▪▪Thermally protected & dimmable (digital dimmer not included) ▪▪High intensity output ▪▪Input Voltage: 12-32 VDC ▪▪2100 lumens @ 23 watts ▪▪IP67 rated ▪▪Colour: Cool white ▪▪Available in 20 and 40 degree beam ▪▪W: 4" x L: 5.75" xD: 2" ▪▪Versatile mounting with stainless steel bracket and hardware
Lighting
▪▪15 watt output ▪▪Can be controlled using a digital dimming switch ▪▪Aluminum anodized & white urethane finished ▪▪1400 lumens ▪▪Colour temp: White 4500K ▪▪10-40 VDC ▪▪120° beam angle ▪▪IP67 rating ▪▪H: 4.6" x W: 6.75" x D: .68"
13
Lunasea Extreme Intensity Exterior Floodlights ▪▪As close as you get to HID intensity ▪▪10,000 point source lumens ▪▪80 watts, 85-265 VAC ▪▪Advanced active cooling ▪▪Marine grade machined enclosure, IP67 ▪▪Stainless steel brackets ▪▪6 foot cord included ▪▪H: 10" x W: 10" x D: 6.45" LUN LLB-541A-31-00* LUN LLB-541B-31-00* LUN LLB-541C-31-00* * Request Items
10 degree 20 degree 40 degree
LIGHTING A SAFE PASSAGE W E
Navi light 360° 360º Superbright light
Navi light Dual Kit S
N
Super Bright LEDs Waterproof Magnetic Attachment Compact & Portable
All of the features of the Navi light 360° with a suction cup attachment system
Waterproof Double Magnetic System
Functions 1. All on - Tri- Color Navigation light 2. Only White - Stern Navigation light / Flash light 3. Red and Green - Bi-Color Navigation light 4. Only Red - Red Navigation light 5. Only Green - Green Navigation light 6. All off
Features ▪ Ultra bright CREE LED headlamp ▪ 5 lighting modes incl. red light ▪ Small and light - only 48 g (without battery) ▪ Multi-position tilt function ▪ IPX6 waterproof
Sport
W
All of the features of the Navi light 360° in Navigation Tri-Colour
Designed by experienced Sailors and includes all functions needed to make it the Sailor’s first choice: a red light to preserve night vision, a white floodlight to light the whole sail, and an ultra-powerful distance light shining up to 70 m, an emergency flash light to increase the visibility and a multi-position tilt function for exact and comfortable beam positioning.
E
Navi light RedGreen
Headlamp
N
▪ Exceptionally Cost effective ▪ Sealed unit, air-tight and waterproof ▪ Superbright 360° Light Visible up to 2 km in darkness ▪ High Burn time: ▪ Light Weight: only 130g (155g with magnet bracket) ▪ Simple push button on/off ▪ Attach to almost anything with its double magnetic system ▪ Floats in water with light facing up ▪ Ultra compact; small enough to fit inside a pocket. ▪ Easy fastening to caps, hats, hoods and all types of clothing ▪ Runs on standard 3 x AAA batteries ▪ Dual Mode – Steady-on or Flashing ▪ Rugged, durable and impact resistant
NaviSafe
Ready to go navigation light solution that securely mounts on any smooth, flat surface. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat. The suction cup can also be used to hold a GoPro camera (Hero / 2 / 3) when no light is needed - the mount is fully compatible. Kit contains the white all-round (041) and tri-colour (341) navigation lights with a quick mounting suction cup design. ▪▪USCG Approval, 2 Nautical Miles
001
010
NaviSafe Magnetic Mount ▪▪Compatible with Navisafe double magnetic system
NAS 771
NAS 001 Black NAS 010 Green fluorescent
Parts: NAS 110
Spare magnetic bracket 055
W
E
N
Railblaza Starport Mount NAS 055 Black
W
E
N
Scotty Mount NAS 061 Black
Suction Cup Mount
NaviSafe Light Pack - For Inflatables
061
Consisting of lights and mountings needed to fit out most inflatable boats up to 12 m with Navigation lights in compliance with COLREG 72 (International Regulations for Preventing Collision at Sea). ▪▪Navi light 360° (#001) ▪▪Navi light Red/Green (#305) ▪▪Telescopic Pole V-Mount (#901) ▪▪Navisafe converter RAILBLAZA (#930) ▪▪RIBPort (#525)
NAS 041 Black 041
NaviSafe Tri-Colour ▪▪USCG Approval, 2 Nautical Miles ▪▪5 Modes: 1. All on Tri-Color 2. Red and Green Bi-Color 3. Only Red Red side 4. Only Green Green side 5. Only White White stern ▪▪Floating, waterproof and air-tight ▪▪Powered by three AAA batteries (not included)
NaviSafe/Railblaza Ribport Adapter ▪▪Use Navisafe with your inflatable without having holes cut into the tubing ▪▪150 mm x 114 mm x 21 mm
355
NAS 525 W
E
N
NaviSafe Magnetic Mount ▪▪Compatible with Navisafe magnetic system
NAS 765
305
NAS 305 Black
Parts: NAS 110
Spare magnetic bracket
Railblaza Starport Mount ▪▪Compatible with RAILBLAZA StarPorts mounting system
361
N E
NAS 355 Black
W
Scotty Mount NAS 361 Black
Suction Cup Mount NAS 341 Black
341
Lighting
▪▪USCG Approval, 2 Nautical Miles ▪▪5 Modes: 1. 360° All-round 16 LED 2. 225° Masthead 10 LED 3. 135° Stern 6 LED 4. 360° Flashing 16 LED 5. 360° Dim function 4 LED ▪▪Floating, waterproof and air-tight ▪▪Powered by three AAA batteries (not included)
W
NaviSafe Navi Light Dual Kit S
E N
NaviSafe All-Round White
15
16
NaviSafe
Lighting
NaviSafe Mounting Pole Kits With Magnetic Heads ▪▪901/902 poles have Railblaza Starport mounts while the 900 is a fixed mount base adjustable through 180° ▪▪The 901/902 series will fit many anchor winches and winches ▪▪Secure 19-30" telescopic adjustment ▪▪Can be used with the 001, 010 and 305 Navi Lights (magnetic mount) ▪▪Top has the standard magnetic attachment for Navi Light * Light not included NAS 900
Horizontal fixed mount
NAS 901 NAS 902 NAS 903
Vertical mount with sideport Horizontal mount with starport Horizontal Scotty mount
900
900
901
902
901 mounted
NaviSafe Mounting Poles With Bendable Suction Mount & Magnetic Head ▪▪Secure, Quick release suction cup base with NAVISAFE magnet system head ▪▪Bendable through 180° ▪▪Includes mountable base plate NAS 910
NaviSafe Mounting Poles With Clamp-on Rail Mount & Magnetic Head ▪▪Secure adjustable clamp base with NAVISAFE magnet system head ▪▪Rotates through 180° NAS 920
NaviSafe/Railblaza Converter With StarPort Mount & Magnetic Head This converter is a cross over product to make the best use of the RAILBLAZA StarPort Mounting system. The product’s top with the NAVISAFE magnet system will securely hold your Navi light 001/300 and the base fits to all RAILBLAZA Mounts. We highly recommend this product to assure a horizontal fixing regardless of the mount used. NAS 930 NAS 901 mount with a NAS 001 Navi Light
903
NaviSafe
17
NaviSafe Headlamp
▪▪Functions as a head light, 360° light and emergency flash ▪▪The complete unit and components float in water ▪▪The LED is tilted to light forwards ▪▪Full range of attachments can be worn anywhere ▪▪Includes wrist strap & armband Weight: ............. 85g Size:................... H: 35mm x W: 50mm x L:62mm Water proof:...... 6 m Batteries:........... 3 x AAA (not included) Modes: 1 Red LED........ Forward 2 White LED..... Forward 4 White LED..... Forward 11White LED.... 360° flashing light
This headlamp contains three main function: a red light to preserve night vision, a white floodlight, and an ultra-powerful distance light shining up to 70 m, plus tilt function for exact and comfortable beam positioning. ▪▪Ultra bright CREE LED headlamp ▪▪Weighs 68 g with a single AA battery (not included) ▪▪IPX6 classified and withstands heavy splashing and rain Navisafe Smart Mode Switch: Press and hold for 0.5 sec to activate the red light. If the red light is ON for more than 3 PRESS the switch again and the light turns OFF To activate the white light PRESS and HOLD for 0.5 sec and activate the red light, PRESS again quickly and enter into white light mode PRESS again quickly to get to the next mode In ANY mode: PRESS and HOLD for 1.5 sec to turn light OFF
W
NAS 220
NaviSafe 360° LED Stealth (Hunter) ▪▪All the modes and features of the original Navi Light but without reflective material ▪▪A removable black cap eliminates excess relflection while focusing the directional beam
NaviSafe Mini Five different lighting modes including red LED for night vision. ▪▪Waterproof ▪▪Compact & robust ▪▪Powerful 1 watt red & white LEDs ▪▪Batteries: 2 x AAA (not included) ▪▪H: 59mm x W: 39mm x D: 18mm
NAS 820**
NaviSafe Sport Attachments Standard Arm Band Sport Attachment ▪▪This much shorter version of the Navi light standard armband is great for ladies and children, and for anyone wearing the Navi Light Sport with bare arms ▪▪The Navi Light Sport quickly and easily secures to the Small Armband using a simple hook-and-loop system ▪▪Reflective material enhances visibility NAS 850**
850
NAS 400 Black NAS 401 White NAS 403 Pink NAS 404 Yellow
860
Double Magnetic Holder ▪▪Powerful magnets secure the Navi Light Sport to a huge variety of surfaces and materials ▪▪Operates as a single magnetic system, or as a two-part system with separable magnetic surfaces ▪▪Powerful magnets clamp two halves together through even thick material 870
NaviSafe PFD Attachment For #001 & #010 Lights
NAS 860**
The Personal Floating Device (PFD) attachment is the must have for canoe or kayak users who do not want to carry the Navi light 360° attached to their hat. It fits perfectly into the Lash Tab or Wedding tube of most of the life vests available in the market. Use the lanyard of the light and secure the light to the PFD attachment once it has been fixed.
Clip Holder
NAS 120
▪▪A simple hook-and-loop system secures the Navisafe clip holder to your Navi Light Sport ▪▪42 small teeth keep the sturdy spring-loaded clip in place NAS 870**
Velcro Straps
880
▪▪Three different sizes of Velcro straps provide the ultimate in flexible attachment systems for the Navilight Sport. ▪▪16cm (small), 25cm (medium) and 48cm (large) NAS 880**
** Limited Quantities
Lighting
NAS 800**
E N
NaviSafe 360° Sport
Rigid Industries
18
Lighting
Rigid Industries Marine Lights ▪▪Available in Hybrid or Specter optics ▪▪GORE pressure equalization vent ▪▪Unbreakable polycarbonate lens ▪▪A360 aluminum cast housing ▪▪UV 3800 polyester powdercoat ▪▪9-36VDC ▪▪50,000+ hour life span ▪▪Diffuse version also available ▪▪IP68 certified ▪▪MIL810-STDG vibration certified & ROHS compliant ▪▪Patented optic system ▪▪Integrated thermal management system ▪▪Stainless steel mounting bracket and hardware
Marine Series Lights Feature a
Durable UV 3800 Marine Grade Polyester Powdercoat
M-SERIES 3" Dually Hybrid Part #
Colour
Type
A-B-C
RIG 60121 RIG C60121
White Black
Spot
646 - 254 - 508
RIG 60111 RIG C60111
White Black
Flood
55 - 74 - 148
RIG 60151 RIG C60151
White Black
Diffusion
11 - 33 - 66
Spot
Flood
▪▪LED's: 4 ▪▪Total Watts: 20 ▪▪Amp Draw: 1.45 ▪▪Raw Lumens: 1568
Diffused
M-SERIES 3" D2 Specter Part #
Colour
Type
A-B-C
RIG 70131 RIG C70131
White Black
Driving
203 - 142 - 285
RIG 70111 RIG C70111
White Black
Wide
173 - 132 - 263
RIG 70151 RIG C70151
White Black
Diffusion
20 - 45 - 89
Driving
▪▪LED's: 6 ▪▪Total Watts: 34.5 ▪▪Amp Draw: 2.5 ▪▪Raw Lumens: 3090
Wide
Diffused
LUX GRAPHS
The custom designed Lux graphs will help to paint the picture of brightness at certain distances.
A
The measurement of light emitted at 10 meters (32.8 feet) from the lens
B
Distance at 1 Lux (defined as enough usable light to read a newspaper)
C
Distance with .25 Lux = peak beam distance (lighting that resembles moonlight)
19
Rigid Industries
W E
Part #
N
M-SERIES 6" Hybrid
Combo
Type
A-B-C
White Black
Spot
1750 - 418 - 837
RIG C80631
Black
Combo
690 - 263 - 525
RIG C80611
Black
Flood
170 - 130 - 261
RIG 806512
White
Diffused
50 - 71 - 141
▪▪LED's: 12 ▪▪Total Watts: 45 ▪▪Amp Draw: 3.26 ▪▪Raw Lumens: 4500
Lighting
Colour
RIG 806212 RIG C80621
N W E
M-SERIES 10" Hybrid Part #
Colour
Type
A-B-C
RIG 810212
White
Spot
2530 - 503 - 1006
RIG C81011
Black
Flood
260 - 161 - 322
RIG C81031
Black
Combo
1500 - 387 - 775
▪▪LED's: 20 ▪▪Total Watts: 65 ▪▪Amp Draw: 4.71 ▪▪Raw Lumens: 5740
E
N
Part #
W
M-SERIES 40" Hybrid Colour
Type
A-B-C
RIG C84031
Black
Combo
4890 - 699 - 1399
RIG 840312
White
Combo
4890 - 699 - 1399
▪▪LED's: 80 ▪▪Total Watts: 220 ▪▪Amp Draw: 15.94 ▪▪Raw Lumens: 18400
W
E
N
M-SERIES 50" Hybrid Part #
RIG 850312
Colour
Type
A-B-C
White
Combo
6040 - 777 - 1554
▪▪LED's: 100 ▪▪Total Watts: 275 ▪▪Amp Draw: 19.93 ▪▪Raw Lumens: 23000
M-SERIES Q
24511
N
Colour
Type
A-B-C
RIG 24511
White
Flood
169 - 130 - 260
RIG 24521
White
Spot
1840 - 429 - 858
Dimensions HxWxD
6.79" x 6.75" x 3.42"
W
Part #
E
▪▪A combination of four D2 specter optics into one large sturdy housing with a vibration isolator and 304 stainless bracket included ▪▪LED's: 16 ▪▪Total Watts: 80 ▪▪Amp Draw: 5.8 ▪▪Raw Lumens: 7040 24521 Driving Pattern - The Driving version of the Specter optics system projects light not only far, but also wide. This light utilizes a narrow, oval-shaped reflector that projects both spot and flood beam patterns. Rather than a conical beam, this technology creates an oblong beam that maintains a bright center hot spot, as well as incredible horizontal dispersion. Diffusion Lens - Perfect for scene or area lighting, the diffusion lens was specifically engineered to project light at a 60º flood pattern. Combine that with our patented optics and you have the best LED flood light in the industry. Like our standard lens, the diffusion lens is made from optically clear, unbreakable polycarbonate plastic.
Rigid Industries / Plug Light
20
N W E
Rigid Industries Adjustable Bar Mount Kit
Lighting
▪▪Includes two (2) mounts; one for each end of a light bar ▪▪Mounts allow for 1" of position adjustment for extreme versatility ▪▪Made in the USA from light-weight, black anodized billet aluminum RIG 48720 RIG 42020 RIG 42320 RIG 45220
Fits 1.875" Fits 2" Fits 2.375" Fits 2.5"
Rigid Industries Halo 800 Lumens Flashlight This flashlight has 5 modes: 1. Medium - Approx. 500 lumens 2. Low - 200 lumens 3. High - 800 lumens 4. Strobe 5. SOS strobe in morse code ▪▪VERY bright light on high setting ▪▪Full charge run time (medium) - 2 hours 45 minutes ▪▪Includes AC wall and DC adapter chargers ▪▪Head diameter: 1-3/4" ▪▪Length: 5-7/8" ▪▪Weight: 4.5oz without batteries RIG 30120
Parts: RIG 30111
Replacement Li-on battery
Rigid Industries Deluxe Docking Lights
PLG BLUE PLG GREEN PLG RED PLG WHITE
Multi Light Multi-colour light provides red, blue, green, yellow, white, teal and purple options. Pick one colour or have the Plug Light cycle through them all. ▪▪Complete with controller switch PLG MULTI COLOUR
W E
RIG 40035 Pair
▪▪Stainless steel underwater LED light threads into a boat’s garboard drain plug; 1/2” NPT ▪▪Does not require drilling ▪▪Easy, user-friendly two wire installation ▪▪Underwater light for fishing, diving, cruising and dock parties ▪▪Ultra-waterproof light with 316L stainless steel housing ▪▪Shatterproof crystal lens ▪▪6 LED; 720 lumen ▪▪12V; 1 amp ▪▪1 year warranty
N
Features Rigid’s marine-grade SR-M2 (Wide optics) LED light. By incorporating a reflector with no facets or orange peel, its Specter optics system produces an intense, smooth beam with minimal wasted light. The SR-M2 LED light projects up to 263 meters with an output of 1,125 lumens per side. Drawing only 0.82 amps, the SR-M2 will operate at 100% with minimal power consumption. A high-power A-Series light has been precisely placed on the side to project light that gives you additional coverage for docking and securing your vessel. The small but powerful A-series LED light projects an amazing 400 lumens per side, drawing a minimal 0.3 amps. ▪▪Stainless steel construction ▪▪10-28V DC ▪▪Reverse polarity protection ▪▪10-28 VDC ▪▪IP68, IP69K certified, ROHS compliant ▪▪L: 8.45" x H: 4.59" x Overall depth: 2.14"
Plug Light Underwater Lights
Electrical / Electronics
21
ALMO
22
BLUE SEA SYSTEMS
25
EFOY
50
ENERGY 1
52
FTZ
53
FURUNO
58
FUSION
67
HATTELAND DISPLAYS
71
JENSEN
73
MAGNUM
75
MARETRON
80
MASTERVOLT
86
PROFESSIONAL MARINER
90
SAMLEX
91
SHAKESPEARE
93
SMART PLUG
99
TECHFLEX
100
UNIDEN
102
22
Almo Almo Boat Cable (Black/Green/White)
Electrical / Electronics
Almo Safety Boat Cable (Red/Yellow) Colour coded insulated tinned copper wire with a high quality flame resistant white PVC cover for long life under all normal conditions. ▪▪Rated 600 volt, 105°C Dry, 75° C Wet Part #
AWG
Colour coded insulated tinned copper wire with a high quality flame resistant white PVC cover for long life under all normal conditions. ▪▪Rated 600 volt, 105°C Dry, 75° C Wet Part #
AWG
Length
ALM 10/3W-BGW-C
10/3
100’
ALM 10/3W-BGWFT
10/3
Foot
Length
ALM 10/3W-BGWR
10/3
500’
12/3
100’
ALM 10/2W-RY-C
10/2
100’
ALM 12/3W-BGW-C
ALM 10/2W-RYFT
10/2
Foot
ALM 12/3W-BGWFT
12/3
Foot
12/3
500’
ALM 10/2W-RYRL
10/2
500’
ALM 12/3W-BGWR
ALM 12/2W-RY-C
12/2
100’
ALM 14/3W-BGW-C
14/3
100’
14/3
Foot
ALM 12/2W-RYFT
12/2
Foot
ALM 14/3W-BGWFT
ALM 12/2W-RYRL
12/2
500’
ALM 14/3W-BGWR
14/3
500’ 100’
ALM 14/2W-RY-C
14/2
100’
ALM 16/3W-BGW-C
16/3
ALM 14/2W-RYFT
14/2
Foot
ALM 16/3W-BGWFT
16/3
Foot
ALM 14/2W-RYRL
14/2
500’
ALM 16/3W-BGWR
16/3
500’
ALM 16/2W-RY-C
16/2
100’
ALM 16/2W-RYFT
16/2
Foot
ALM 16/2W-RYRL
16/2
500
ALM 18/2W-RY-C
18/2
100’
ALM 18/2W-RYFT
18/2
Foot
ALM 18/2W-RYRL
18/2
500’
Black/green/white insulated tinned copper wire with a high quality flame resistant white PVC cover for long life under all normal conditions. ▪▪Rated 600 Volt, 105°C Dry, 75° C Wet Part #
ALM 14/3RW-BGW-FT
Almo Boat Cable (Red/Black) Colour coded insulated tinned copper wire with a high quality flame resistant white PVC cover for long life under all normal conditions. ▪▪Rated 600 volt, 105°C Dry, 75° C Wet Part #
Almo Round Jacket Tinned Boat Cable
AWG
Length
ALM 10/2W-RB-C
10/2
100’
ALM 12/2W-RB-C
12/2
100’
ALM 14/2W-RB-C
14/2
100’
ALM 14/2W-RBFT
14/2
Cut
ALM 16/2W-RB-C
16/2
100’
ALM 16/2W-RBRL
16/2
500’
ALM 18/2W-RB-C
18/2
100’
AWG
Length
14/3
Cut
Almo 10/3 Yellow Service Cord Premium quality cable with rugged high performance, bright yellow, PVC insulation. Excellent flexibility even at very low temperatures. Insulation is highly resistant to tears, oils, solvents, ozone, heat and cold. ▪▪UL listed Type STOW and CSA certified STOW, 600 volts, 60°C. ▪▪Black/green/white ▪▪250' spools, sold by the foot ALM 10/3STOWFT
23
Almo Almo Tinned Primary Wire
Almo Tinned Primary Wire - Continued
▪▪UL Listed tinned battery cable ▪▪Rated 600 Volt*105°C Dry, 75°C Wet ▪▪Recognized by ABYC for AC and DC circuits ▪▪Insulated tinned copper wire Part #
Color
Length
ALM 10BLKAWGC
10
Black
100
ALM 10BLKAWGM
10
Black
1000
ALM 10GRNAWGC
10
Green
100
ALM 10REDAWGC
10
Red
100
ALM 10REDAWGM
10
Red
1000
ALM 10WHTAWGC
10
White
100
ALM 10YELAWGC
10
Yellow
100
ALM 10YELAWGM
10
Yellow
1000
ALM 12BLKAWGC
12
Black
100
ALM 12BLKAWG250
12
Black
250
ALM 12BLKAWG500
12
Black
500
ALM 12GRNAWGC
12
Green
100
ALM 12REDAWGC
12
Red
100
ALM 12REDAWG500
12
Red
500
ALM 12WHTAWGC
12
White
100
ALM 12YELAWGC
12
Yellow
100
ALM 12YELAWG250
12
Yellow
250
ALM 14BLKAWGC
14
Black
100
ALM 14BLKAWG250
14
Black
250
ALM 14BLKAWGM
14
Black
1000
ALM 14BLUAWGC
14
Blue
100
ALM 14BLUAWGM
14
Blue
1000
ALM 14BRNAWGM
14
Brown
1000
ALM 14BRNAWGC*
14
Brown
100
ALM 14GRNAWGC
14
Green
100
ALM 14GRNAWGM
14
Green
1000
ALM 14GRYAWGM
14
* Request item
Grey
1000
Part #
Color
Length
14
Orange
100
ALM 14REDAWGC
14
Red
100
ALM 14REDAWGM
14
Red
1000
ALM 14WHTAWGC
14
White
100
ALM 14WHTAWGM
14
White
1000
ALM 14YELAWGC
14
Yellow
100
ALM 14YELAWGM
14
Yellow
1000
ALM 16BLKAWGC
16
Black
100
ALM 16BLKAWGM
16
Black
1000
ALM 16BLUAWGC
16
Blue
100
ALM 16BRNAWGC
16
Brown
100
ALM 16GRNAWGC
16
Green
100
ALM 16GRYAWGM
16
Grey
1000
ALM 16ORGAWGC
16
Orange
100
ALM 16PINKAWGM
16
Pink
1000
ALM 16REDAWGC
16
Red
100
ALM 16REDAWGM
16
Red
1000
ALM 16PURAWGC
16
Purple
100
ALM 16WHTAWGC
16
White
100
ALM 16WHTAWGM
16
White
1000
ALM 16YELAWGC
16
Yellow
100
ALM 16YELAWGM
16
Yellow
1000
ALM 18BLKAWGC
18
Black
100
ALM 18BLKAWG500
18
Black
500
ALM 18BRNAWG500
18
Brown
500
ALM 18GRNAWGC
18
Green
100
ALM 18REDAWGC
18
Red
100
ALM 18REDAWG500
18
Red
500
ALM 18WHTAWGC
18
White
100
ALM 18YELAWGC
18
Yellow
100
Electrical / Electronics
AWG
AWG
ALM 14ORGAWGC
24
Almo
Almo Battery Cable
Almo Battery Cable - Continued
Electrical / Electronics
Colour coded insulated tinned copper wire with a high quality flame resistant SGT thermoplastic cover for long life under all normal conditions. ▪▪Rated 600 volt, 105°C Dry, 75° C Wet
Part #.
Part #.
AWG
Colour
Length
ALM 4/0REDAWGC
4/0
Red
100'
ALM 4/0REDAWG3
4/0
Red
300'
ALM 4/0REDAWGFT
4/0
Red
Cut
ALM 4/0BLKAWGC
4/0
Black
100'
ALM 4/0BLKAWG3
4/0
Black
300'
ALM 4/0BLKAWGFT
4/0
Black
Cut
ALM 4/0YELAWGC
4/0
Yellow
100’
ALM 2/0REDAWGC
2/0
Red
100'
ALM 2/0REDAWGR3
2/0
Red
300'
ALM 2/0REDAWGFT
2/0
Red
Cut
ALM 2/0BLKAWGC
2/0
Black
100'
ALM 2/0BLKAWGR3
2/0
Black
300'
ALM 2/0BLKAWGFT
2/0
Black
Cut
ALM 2/0YELAWGC
2/0
Yellow
100’
ALM 2/0YELAWGFT
2/0
Yellow
Cut
ALM 1/0REDAWGC
1/0
Red
100'
ALM 1/0REDAWGFT
1/0
Red
Cut
ALM 1/0BLKAWGC
1/0
Black
100'
ALM 1/0BLKAWGFT
1/0
Black
Cut
ALM 1/0YELAWGC
1/0
Yellow
100’
ALM 1/0YELAWGFT
1/0
Yellow
Cut
ALM 1BLKAWGC
1
Black
100'
ALM 1BLKAWGR
1
Black
250'
ALM 1BLKAWGFT
1
Black
Cut
ALM 1REDAWGC
1
Red
100'
ALM 1REDAWGR
1
Red
250'
ALM 1REDAWGFT
1
Red
Cut
ALM 1YELAWGC
1
Yellow
100’
ALM 2REDAWGC
2
Red
100'
ALM 2REDAWGR
2
Red
500'
ALM 2REDAWGFT
2
Red
Cut
ALM 2BLKAWGC
2
Black
100'
ALM 2BLKAWGR
2
Black
500'
ALM 2BLKAWGFT
2
Black
Cut
ALM 2YELAWGC
2
Yellow
100’
ALM 2YELAWG250
2
Yellow
250’
ALM 2YELAWGFT
2
Yellow
Cut
AWG
Colour
Length
ALM 4REDAWGC
4
Red
100'
ALM 4REDAWG250
4
Red
250'
ALM 4REDAWGR
4
Red
500'
ALM 4REDAWGFT
4
Red
Cut
ALM 4BLKAWGC
4
Black
100'
ALM 4BLKAWGFT
4
Black
Cut
ALM 4YELAWGC
4
Yellow
100’
ALM 4YELAWG250
4
Yellow
250’
ALM 4YELAWGFT
4
Yellow
Cut
ALM 6REDAWGC
6
Red
100'
ALM 6REDAWG250
6
Red
250'
ALM 6REDAWGR
6
Red
500'
ALM 6REDAWGFT
6
Red
Cut
ALM 6BLKAWGC
6
Black
100'
ALM 6BLKAWGR
6
Black
100'
ALM 6BLKAWGFT
6
Black
Cut
ALM 6GRNAWGC
6
Green
500'
ALM 6GRNAWGR
6
Green
100'
ALM 6GRNAWGFT
6
Green
Cut
ALM 6YELAWGC
6
Yellow
100’
ALM 6YELAWG250
6
Yellow
250’
ALM 6YELAWGFT
6
Yellow
Cut’
ALM 8REDAWGC
8
Red
100'
ALM 8REDAWGR
8
Red
500'
ALM 8REDAWGFT
8
Red
Cut
ALM 8BLKAWGC
8
Black
100'
ALM 8BLKAWGR
8
Black
500'
ALM 8BLKAWGFT
8
Black
Cut
ALM 8GRNAWGC
8
Green
100'
ALM 8GRNAWGR
8
Green
500'
ALM 8GRNAWGFT
8
Green
Cut
ALM 8YELAWGC
8
Yellow
100’
ALM 8YELAWGFT
8
Yellow
Cut
Blue Sea Systems
AC SOURCES
AC LOADS
Outlets Shore Power
Microwave
Genset Refrigerator
Inverter
DC LOADS Horn
DC SOURCES Running Lights
Cabin Lights Engine 1 GPS
Engine Battery
VHF
Stereo House Battery
Windlass Auxiliary Battery Bow Thruster
Scan for additional product information
www.bluesea.com
26
Electrical / Electronics
Blue Sea Systems Pacific Series Battery Chargers Reliability ▪▪Rugged, finned aluminum case and large internal heat sinking dissipates heat for less fan run time and longer component life ▪▪Universal Line Voltage 90-265V AC 50/60 Hz for use anywhere in the world and compatible with low voltage power sources ▪▪Field serviceable AC Input power protection to quickly get the vessel back up and running in the event of an AC power surge ▪▪Selective Float® moves each battery individually to float voltage ending absorption period to prevent overcharging
Ease of use ▪▪Large, bright display communicates with plain language words ▪▪Multi-Language: English, Spanish, Italian, French language selection ▪▪Charge Coordination® works with Blue Sea Systems ACRs to properly charge batteries with shore power at the dock or alternator power underway
Four Control Buttons ▪▪Fan- User adjustable settings ▪▪Dim/ Alarm - Provides adjustment to brightness of LEDs on display as well as Silence function for alarms. ▪▪Output - User adjustable charger output when AC source limitations exist that require lowering the AC current draw. ▪▪Power - Places P12 Battery Charger into standby mode BSS 7520
Blue Sea Systems M2 DC SoC Monitor
W
E
▪▪Three outputs provide charging for up to three battery banks ▪▪User selectable charge profiles for lead acid, gel, AGM or new Thin Plate Pure Lead and Lithium Ion batteries ▪▪ACR Charge Coordination controls ACR state ensuring proper float stage for each battery ▪▪Battery temperature compensation internal or with remote sensor ▪▪Battery Health Mode repeats the charge cycle weekly during storage or over extended periods ▪▪User selected battery equalizing function to revitalize wet acid batteries Built In Safety Features ▪▪Ignition protected for mounting in a gasoline powered boat's engine compartment or near batteries ▪▪Over and under temperature protection for batteries ▪▪Overheating protection for battery charger ▪▪DC over voltage protection ▪▪AC reverse polarity protection ▪▪Surge and short circuit protection
The M2 OLED Digital Monitors measure essential electrical system parameters with adjustable alarms and an auto-dimming display in a compact enclosure. The M2 Monitors include a MOSFET External Circuit Relay (ECR) which can be used to control external circuits based on any value measured by the M2. The M2 External Circuit Relay is separate from and independent of the Internal Alarm function. diagnostics ▪▪Accurately measures and monitors State-of-Charge of 1 bank ▪▪Measures 3 voltages and 1 current ▪▪Supports programmable shunt ratios ▪▪External relay activation ▪▪High current, high/low voltage, low battery alarms BSS 1830
▪▪Blue Sea Systems onboard support and 5 year warranty ▪▪Extensive suite of diagnostic screens ▪▪User manual and information updates accessible via QR tag below display ▪▪H: 13” x W: 8.46” x D: 3.66” Volts
Amps
Banks
BSS 7521
12
20
3
BSS 7522
12
40
3
BSS 1015 BSS 1010 BSS 1011
12V plug & dash socket kit 12V plug only (max. amps 15 DC) 12V dash socket only (max. amps 10 DC)
Blue Sea Systems Dual USB Port Charger ▪▪Dual USB 2.0 charger socket with watertight cap ▪▪12 VDC ▪▪Output Voltage: 5V DC +/- 5% ▪▪Max. Output Current: 2.1A DC ▪▪Cut Out Dimensions: 1-3/16” Dia BSS 1016
W
Support
E
▪▪Power factor corrected for efficient charging ▪▪MOSFET output eliminates unintentional voltage differences between batteries providing a faster charge for batteries with the greatest amp-hour deficit
▪▪Plug has a moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet ▪▪Plug features an”ON” indicating LED, moisture proof sealing ring, strain relief, and a built-in 10 Amp fuse ▪▪Watertight cap and interlocks with the plug ▪▪Twist lock system -plug locks securely ▪▪Nickel plated copper alloy used for all current carrying components ▪▪Front panel, rear panel, or surface mount ▪▪Max. 15 VDC
N
Blue Sea Systems 12V Plug and Socket Sets
Electrical Performance
Part #
▪▪Charging LED - Quick check for green light confirms charging ▪▪Charge Stage - Displays charging stage ▪▪Equalize LED - Indicates the charger is currently in equalization ▪▪Fan Mode - Indicates charger's internal fan mode ▪▪Charge Output - Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations. ▪▪Alert - Icon LEDs provide warning and alert status
N
Advanced Multi Stage Charging
W E
LED Indicators
N
Blue Sea Systems Battery Charger LED Remote
27 Blue Sea Systems
Electrical / Electronics ELECTRICAL
28
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems Heavy Duty Battery Switches ▪▪Accepts two 4/0 battery cables per terminal ▪▪Luminous label for low light reading ▪▪Ignition protected - Safe for installation aboard gasoline powered boats ▪▪.870” stud length to accept multiple cable terminals ▪▪1/2” tin-plated copper studs for maximum conductivity and corrosion resistance ▪▪Tactile textures indicate knob position by feel only ▪▪Case design allows surface or flush mounting ▪▪Fits all Perko low amperage battery switch hole patterns Specifications
3000
3002
Cranking Rating: 10 sec
2,750 amperes DC
1,750 amperes DC
Cranking Rating: 60 sec
1,325 amperes DC
1,150 amperes DC
Intermittent Rating: 5 min
900 amperes DC
900 amperes DC
Continuous Rating:
600 amperes DC
500 amperes DC
Voltage Rating:
3000
3002
48 volts DC Maximum
BSS 3000 Single circuit On/Off BSS 3002 Selector battery bank 1, battery bank 2 or both
Blue Sea Systems Standard Battery Switches ▪▪Ignition protected - Safe for installation aboard gasoline powered boats ▪▪Tactile textures indicate knob position by feel only ▪▪Case design allows surface or rear panel mounting ▪▪Accepts up to 4/0 battery cables ▪▪Fits all Perko and Guest low amperage battery switch hole patterns ▪▪Luminous label for low light reading ▪▪7/8” stud length to accept multiple cable terminals ▪▪3/8” M10 tin-plated copper studs for maximum conductivity and corrosion resistance ▪▪Make-before-break contact design allows switching between battery banks without power interruption Specifications
9003
9001-9002
5510-5111
Cranking Rating: 10 sec
2,000 amperes DC
2,000 amperes DC
1,000 amperes DC
Cranking Rating: 60 sec
1,000 amperes DC
1,000 amperes DC
750 amperes DC
Intermittent Rating: 5 min
600 amperes DC
600 amperes DC
525 amperes DC
Continuous Rating:
350 amperes DC
350 amperes DC
350 amperes DC
Voltage Rating:
48VDC Maximum
32VDC Maximum
32VDC Maximum
BSS 9001E BSS 9002E BSS 9003E
4, Off-1-2-Both 4, Off- 1-2-Both AFD* 2, Off-On
Dual Circuit Switches BSS 5510E
2, On-Off double pole
BSS 5511E
3, On-Off-Both
Switches both negative & positive lines simultaneously with one simple On/Off switch. Switches two battery banks simultaneously with one simple ON/OFF switch while maintaining battery bank isolation.
9001E-9002E
5510E
9003E
5511E
29
Blue Sea Systems Blue Sea Systems M-Series Battery Switches
6005
Specifications
6005-6006
6007
6011
Cranking Rating: 10 sec
1,500 Amps DC
1,500 Amps DC
1,000 Amps DC
Cranking Rating: 60 sec
775 Amps DC
775 Amps DC
650 Amps DC
Intermittent Rating: 5 min
500 Amps DC
500 Amps DC
450 Amps DC
Continuous Rating:
300 Amps DC
300 Amps DC
300 Amps DC
Voltage Rating:
48 VDC Max
32 VDC Max
32 VDC Max
Case Material:
BSS 6005 BSS 6006 BSS 6007
6006
6007
Reinforced Polycarbonate
Single circuit On/Off, w/key Single circuit On/Off, w/knob Selector, 4 position
Dual Circuit Switches BSS 6011
Dual Circuit Plus**
**The combined batteries function offers the ability to combine the two battery banks in the event of a low Start Battery. 6 Icon lable Set (Included)
Manual Battery Switch Configurations Single Circuit ON - OFF Switches a single battery to a single lead group
Selector 4 Position
Switches isolated battery banks to all leads or combines battery banks to all leads
Dual Circuit
Simultaneously switches two isolated battery leads
Dual Circuit Plus
Simultaneously switches two isolated battery banks or combines battery banks to all loads
M-Series
6005 6006
M-Series
6007
M-Series
6010
M-Series
6011
e-Series
9003e
e-Series
9001e 9002e
e-Series
5510e
e-Series
5511e
HD-Series
3000
HD-Series
3002
Switch set to ON
Switch set to 1
Switch set to 2
Switch set to 1+2
Switch set to ON
Switch set to ON
Switch set to Combine Batteries
6011
Electrical / Electronics
▪▪Ignition protected - Safe for installation aboard gasoline powered boats ▪▪Tactile textures indicate knob position by feel only ▪▪Case design allows surface, front panel, or rear panel mounting ▪▪Accepts up to 4/0 battery cables ▪▪Molded in durable reinforced polycarbonate ▪▪Label set included for circuit identification ▪▪Removable key remains positively retained (6005} ▪▪3/8” M10 Tin-plated copper studs ▪▪7/8” Long stud length to accept multiple cable terminals ▪▪Isolator cover protects rear contacts
30
Blue Sea Systems W E
Electrical / Electronics
N
Blue Sea Systems m-LVD Low Voltage Disconnect
▪▪Senses low battery voltage and automatically disconnects devices to save power for starting or to preserve battery life ▪▪Status light in both m-LVD and Remote Control Switch provides visual warning of low voltage state prior to disconnect ▪▪Alarm output available for audible warning of low voltage state prior to disconnect (optional alarm required) Remote Control Switch functions: ◦Disconnect Voltage Adjustment - Sets desired disconnect voltage ◦Override - Temporarily delays circuit disconnect for 10 minutes ◦OFF- Temporarily disconnects circuits until voltage rises ◦Override or OFF - Silences alarm (optional alarm required) BSS 7635
Blue Sea Systems Mini ACR Charging Relay ▪▪65 amp continuous rating current from alternators up to 65 amps found on most outboards and many inboard engines ▪▪Senses charging on two battery banks ▪▪Snap-on cover insulates terminal connections ▪▪LED indicates ACR status ▪▪1/4” x .032” male quick connect terminal for ground ▪▪5/8” (16 mm) stud length to accept multiple cable terminals ▪▪12 VDC voltage input BSS 7601
Blue Sea Systems Battery Relay Auto Relay ▪▪120 amp continuous rating ▪▪12/24 VDC auto ranging voltage input ▪▪Senses charging on two battery banks ▪▪Side and bottom knockouts for cable connections ▪▪Clip-on cover insulates terminal connections ▪▪7/8” (22 mm) stud length to accept multiple cable terminals ▪▪Integrated LED indicates ACR status ▪▪1/4” x .032” male quick connect terminals for ground and optional features BSS 7611
Blue Sea Systems Add-A-Battery Kit The ‘ADD A BATTERY’ dual circuit system consists of the 5511e, E-series dual circuit plus battery switch and the 7610, 120 amp SI* automatic charging relay (in one package). *Starting isolation ▪▪The 5511e, dual circuit plus battery switch isolates engine and house circuits, and combines batteries for emergency starting ▪▪The 7610, 120 amp SI automatic charging relay combines batteries for charging BSS 7650
Blue Sea Systems Add-A-Battery Kit - Mini A compact, simple way to control the switching with the m-Series Dual Circuit Plus Battery Switch (6011) and automatically share a single source of charging between two batteries with the Mini ACR Automatic Charging Relay (7601). BSS 7649
31
Blue Sea Systems Blue Sea Systems Solenoid
BSS 9012
Blue Sea Systems ML-Series Automatic Charging Relays ▪▪Manual control switch provides an added level of safety allowing control with or without power, and offering lock-off capability for servicing ▪▪Includes ML-Series remote control contura switch PN 2146 ▪▪Automatically manages the charging of two large battery banks ▪▪Allows paralleling of battery banks for emergency starting ▪▪500 Ampere continuous rating to support high-output alternators ▪▪Magnetic latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state ▪▪Dual sensing—senses charge on both battery banks ▪▪Start isolation (SI)—can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics ▪▪Engine isolation (EI)—can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output ▪▪Senses charging on two battery banks ▪▪LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in start or engine isolation ▪▪3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance ▪▪7/8" (22mm) stud length accepts multiple cable terminals ▪▪Silver alloy contacts provide high reliability for switching live loads ▪▪Label recesses for circuit identification ▪▪Meets ISO 8846 Marine and SAE J1171 Marine external ignition protection requirements ▪▪Waterproof rated IP66—protected against powerful water jets ▪▪5.47” x 3.75” BSS 7622 BSS 7623
12 volt 24 volt
▪▪500 ampere continuous rating for use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs ▪▪Magnetic latch only draws current when changing state of switch, drawing no current in "ON" or "OFF" state ▪▪Silver alloy contacts provide high reliability for switching live loads ▪▪Includes ML-Series remote control contura switch 2145 ▪▪Optional manual control switch provides an added level of safety allowing control with or without power, and offering lockout capability for servicing ▪▪3/8" copper studs, using Blue Sea Systems’ superior one piece technology, suitable for 500 amperes continuous rating and large cable connections ▪▪Cranking rating 10 Sec (10 repeats): 2200 amperes DC ▪▪Intermittent rating 1 min (ul 1107): 750 amperes DC ▪▪Intermittent rating 5 min (ul 1107): 400 amperes DC ▪▪Continuous rating (ul 1107): 300 amperes DC ▪▪Maximum voltage rating: 32 volts DC ▪▪Terminal stud size: 3/8”-16 (m10) ▪▪Terminal stud torque: 140 in-lb ▪▪Cable size to meet ratings: 4/0 awg ▪▪Cable clearance for 4/0 awg cables: 1.12” ▪▪5.47” x 3.75” BSS 7700
12 volt
Blue Sea Systems SI-ACR Automatic Charging Relay
With Cover
▪▪Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics ▪▪Automatically combines battery banks during the charging cycle and isolates under discharge ▪▪12/24V auto ranging voltage input ▪▪Hermetically sealed contacts/vapour proof ▪▪Waterproof rated IP67 ▪▪Ignition protected ▪▪Remote LED output indicates relay state away from ACR ▪▪LED light indicates when batteries are combined ▪▪Supports high-output alternators up to 120 amperes ▪▪Side and bottom knockouts for power cable connections ▪▪Clip on cover protects and insulates terminal connections ▪▪Tin-plated copper studs for maximum corrosion resistance ▪▪7/8” (22.22mm) stud length to accept multiple cable terminals ▪▪1/4” x .031” male quick connect terminals for ground and remote LED and starting interrupt ▪▪L: 3.886” x W: 3.5” x D: 1.98” BSS 7610 Specifications
12 volt
24 volt
Continuous Rating
120 amperes DC
120 amperes DC
Intermittent Rating
210 amperes DC
210 amperes DC
Inrush Rating
280 amperes DC
280 amperes DC
Opening Delay
0.34 sec.
0.34 sec.
Maximum Cable Size
1/0 AWG
1/0 AWG
Terminal Stud Size
3/8”-16 (M10)
3/8”-16 (M10)
Maximum Torque
140 in-lbs
140 in-lbs
Electrical / Electronics
L-Series Solenoid Switch with Coil Economizer ▪▪Pulse circuit requires very low current draw when contact is closed ▪▪UL recognized - UL 508 ▪▪Functions as a remote battery switch ▪▪Activated by an ON-OFF switch mounted anywhere ▪▪Used as a manual battery paralleling switch ▪▪Integrated coil control minimizes heating and amperage drop ▪▪Mechanical life 1 million cycles ▪▪Input voltage: 9-36 volts Maximum ▪▪Power Consumption: ▪▪Inrush max: 12-36 volts/3.80 amps ▪▪Holding: 12 volts/0.13 amps ▪▪Holding: 24 volts/0.07 amps ▪▪W: 3.17” x H: 2.86”
Blue Sea Systems ML-Series Remote Battery Switch with Manual Control
32
Blue Sea Systems
Choose the right ACR for your application Step
1 Select an ACR that has a CONTINUOUS rating
Electrical / Electronics
Step Step
BATTERY MANAGEMENT
above the maximum alternator output rating and an INTERMITTENT rating that is above the largest load on the auxiliary battery. See page 24 for an explanation.
2 Review the PRESET ACR SETTINGS 3 Select the ACR with the desired PRODUCT FEATURES
Part Number
CONTINUOUS INTERMITTENT
7601
7611
7610
7620
7622
65A 115A
120A 210A
120A 210A
500A 700A
500A 700A
PRESET ACR SETTINGS Combine Voltage -
Charge present Voltage in either battery is ≥13.6V for 30 sec. Relay will close combining batteries Combined batteries share charge
≥13.6V
ACR
≥13.6V
for 30 sec.
for 30 sec.
Start
Auxiliary
Open Voltage -
No charge present or loads exceed charge input Voltage in either battery is ≤12.75V for 30 sec. Relay will open isolating batteries Isolated batteries do not share charge
≤12.75V
ACR
for 30 sec.
≤12.75V
for 30 sec.
Start
Auxiliary
Under Voltage Lockout - Charge may or may not be present - Voltage in either battery is ≤9.6V for 30 sec. - Relay will open isolating batteries protecting the ACR from high current surge - Isolated batteries do not share charge
13.6V
ACR
≤9.6V
for 30 sec.
for 30 sec.
Start
Auxiliary
PRODUCT FEATURES Auxiliary Battery Priority Condition: Engine running - Open voltage is lowered to 12.25V from 12.75V - Relay remains closed longer, combining batteries, to allow use of auxiliary loads for a longer period of time
>12.25V
ACR
for 30 sec.
>12.25V for 30 sec.
Start
Auxiliary
Start Isolation Condition: Engine starting - Relay is open isolating batteries - Batteries are isolated to protect sensitive electronics from voltage sags and spikes
ACR Start
Auxiliary
Start Assist Condition: Engine starting – (Press Contura Switch) - Relay is closed combining batteries - Batteries are combined to share power in the event of a low start battery
ACR Start
Auxiliary
Engine Isolation Condition: Two engines are running - One relay is open and one relay is closed - Engine 1 Start and Engine 2 Start batteries are isolated to protect engine electronics - If requested by engine manufacturer
ACR
ACR Eng. 1 Start
Auxiliary
Eng. 2 Start
Manual Override
Manual override knob provides an added level of safely allowing manual control of functions
Specifications subject to change. See bluesea.com for current information.
29
33
Blue Sea Systems
Battery Management Wiring Schematics for Typical Applications
2 Battery - 1 Engine
2 Battery - 2 Engine
Traditional Configuration
Simple System
1 Selector Battery Switch 1 Automatic Charging Relay
House battery is shared with one engine. One engine battery is in reserve. 1 Dual Circuit Plus™ Battery Switch 1 ON-OFF Battery Switch 1 Automatic Charging Relay
system found on any boat or vehicle. Proper battery management, including switching and
House Engine
charging, is essential for safe and reliable operation. The following basic wiring diagrams
House Engine 2
Engine
show how batteries, battery switches, and Automatic Charging Relays are wired together from a simple single battery / single engine configuration to a two engine, one generator, and four battery bank system. For more detailed
ACR Battery 2
Battery 1
wiring guidelines please consult a qualified
ACR
marine electrician or one of the many books
Note: Uses same style batteries
available on the subject. Note: The ACRs pictured are representative of any ACR. The battery switches are representative of any Battery Switch of the same model.
Simple to use
Start House/Start
Simple System
1 Dual Circuit Plus™ Battery Switch 1 Automatic Charging Relay
Engines share one battery. House battery is in reserve. 1 Dual Circuit Plus™ Battery Switch 1 ON-OFF Battery Switch 1 Automatic Charging Relay
1 Battery - 1 Engine ON-OFF Battery Switch House House
Engine Engine 2
Engine
House
ACR
Engine
ACR
House
Start
Start
Most Flexible
House
Easily isolates a failed battery
Flexible
3 ON-OFF Battery Switches 1 Automatic Charging Relay
Can isolate a failed battery.
Start
3 ON-OFF Battery Switches 1 Automatic Charging Relay
Engine
For m-Series Battery Switches the Paralleling Link Bus 9159 can be used.
House
Engine
For m-Series Battery Switches the Paralleling Link Bus 9159 can be used.
House
ACR Start
House
ACR Start
House
Electrical / Electronics
Batteries are at the heart of the electrical
34
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems ANL Fuse Blocks ▪▪Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction ▪▪For use on systems up to 32 Volts DC ▪▪Large 5/16”-18 studs accept 5/16” (M8) ring terminals ▪▪Swing out design allows replacement of the fuse without removing fasteners ▪▪Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact ▪▪UL 94-V0 reinforced polycarbonate base resists high heat ▪▪Insert molded studs ensure secure fuse mounting ▪▪Cover breakouts allow wire access in any direction ▪▪Fuse mounting blocks tin-plated copper ▪▪Fuses sold separately (see below) BSS 5005 BSS 5503
300 amp 750 amp
Blue Sea Systems Class T Fuse Block These fuse blocks are specifically for marine fusing. They come with a clear polycarbonate cover. The class T fuse is not an ignition protected device so it should not be used inside gas engine rooms or other environments requiring ignition protected devices. 3/8" stud. Takes up to a 4/0 wire. ▪▪W: 2” x L: 7” x H: 2.3” ▪▪Fuses sold separately (see below) BSS 5502
Class T Fuse Block, 225-400 amps
Blue Sea Systems Class T Fuses Provides the most complete protection possible for high amperage circuits. BSS 5117 BSS 5118 BSS 5119 BSS 5120 BSS 5121
5005
5503
Max Amps
300A
750A
Max torque
110 in-lb
107 in-lb
Mounting
#10
1/4”
Cable size
2/0
4/0
ANL fuses
35-300 amps
35-750 amp
Dimensions
L: 4.5” x W: 1.5” x H: 1.65”
L: 7” x W: 2” x H: 2.3”
Blue Sea Systems ANL Fuses ANL fuses for the 5503 & 5005 series fuse blocks. BSS 5165* BSS 5122* BSS 5123 BSS 5124 BSS 5125* BSS 5126* BSS 5127 BSS 5128 BSS 5129 BSS 5130* BSS 5131 BSS 5132* BSS 5133 BSS 5134* BSS 5135* BSS 5136 BSS 5137* BSS 5161* BSS 5163*
40 amp (IP) 50 amp (IP) 60 amp (IP) 80 amp (IP) 100 amp (IP) 130 amp (IP) 150 amp (IP) 175 amp (IP) 200 amp (IP) 225 amp (IP) 250 amp (IP) 275 amp (IP) 300 amp (IP) 325 amp (IP) 350 amp (IP) 400 amp (IP) 500 amp (IP) 600 amp 750 amp
(IP) Ignition protected, SAE J1171 *Request Items
225 amp 250 amp 300 amp 350 amp 400 amp
Blue Sea Systems MEGA or AMG Safety Fuse Block ▪▪Ignition protected for installation aboard gasoline or diesel powered boats ▪▪Sealed cover protects fusest ▪▪Insulating cover satisfies ABYC/USCG requirements ▪▪Cover breakouts allow wire access in any direction ▪▪300A maximum with 2/0 cable ▪▪Fuses sold separately (see below) ▪▪L: 4.92” x W: 1.51” BSS 7721
Blue Sea Systems MEGA or AMG Fuses An economical, 100 to 300 amperage fuse specifically designed for low voltage applications. 32V DC max. ▪▪Sold by the each BSS 5101 BSS 5102 BSS 5103 BSS 5104* BSS 5105 BSS 5106* BSS 5107
100 amp 125 amp 150 amp 175 amp 200 amp 225 amp 250 amp
* Request Items
35
Blue Sea Systems Blue Sea Systems Split Bus Fuse Block
▪▪Accepts 5/16” (M8) ring terminals ▪▪Insulating cover satisfies ABYC/USCG insulation requirements ▪▪Insulating cover breakouts allow wire access in three directions ▪▪Insert molded studs ensure secure fuse mounting ▪▪Stainless steel studs provide resistance to corrosion and high torque for excellent electrical contact ▪▪UL 94-V0 base resists high heat ▪▪L: 4.07” x W: 1.5” ▪▪Fuse sold seperately
▪▪Provides two isolated groups of six ATO/ATC circuits ▪▪For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits ▪▪Screw terminals for securing wires accept ring terminals ▪▪One-piece stainless flange nuts ensure safe and secure connections ▪▪Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements ▪▪Easy to open, push button latch for easy access to fuses ▪▪Tin-plated copper buses and fuse clips ▪▪Max Amps: Block 100A, Circuit 30A ▪▪H: 7.35” x W: 3.32” x D: 1.51” ▪▪ST blade fuses sold separately
▪▪Ignition protected for installation aboard gasoline or diesel powered boats ▪▪Sealed cover protects fuses from the harsh marine environment ▪▪Insulating cover satisfies ABYC/USCG insulation requirements ▪▪Cover breakouts allow wire access in any direction ▪▪200A maximum with 2/0 cable ▪▪Fuses sold separately (see below) ▪▪L: 4.92” x W: 1.51” BSS 7720
Blue Sea Systems MIDI or AMI Fuses
BSS 5032
Blue Sea Systems ATO/ATC Fuse Blocks ▪▪Clear insulating cover with label recesses for standard Blue Sea Systems’ labels ▪▪Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses ▪▪Tin-plated copper buses and beryllium copper fuse clips give full 30 Ampere rating per circuit. ▪▪Stud: #10-32 ▪▪Uses ATO fuses ▪▪Includes ‘Blank’ lables ▪▪Insulated cover protects connections
▪▪Clear cover offers visible indication of blown fuses ▪▪Color-coded for easy amperage identification ▪▪Ignition protected to SAE J1171 when used with Blue Sea Systems SafetyHub family of products ▪▪Sold in packages of 2 BSS 5250* BSS 5251 BSS 5252 BSS 5253* BSS 5254* BSS 5255 BSS 5256 BSS 5257 BSS 5258 BSS 5259* BSS 5260
30 amp 40 amp 50 amp 60 amp 70 amp 80 amp 100 amp 125 amp 150 amp 175 amp 200 amp
*Request Items
Electrical / Electronics
Blue Sea Systems MIDI or AMI Safety Fuse Block
W E
BSS 5001
N
Blue Sea Systems MEGA or AMG Safety Fuse Block
5025
5033
Part #
Description
A
B
C
BSS 5025
6 Circuit w/ground
3.315"
4.894"
3.881”
BSS 5026
12 Circuit w/ground
3.315"
6.472"
5.459"
BSS 5033
6 Circuit (no cover)
3.315"
3.652"
2.639"
Blue Sea Systems
Blue Sea Systems ST CLB 12 Volt Breaker Blocks
Blue Sea Systems SafetyHub 100 Fuse Block
▪▪Quick connect clips allow circuit breakers to snap easily into place ▪▪Tin-plated copper busses and screw terminals ▪▪Clear insulating cover satisfies ABYC/USCG insulation requirements ▪▪Breakouts allow wire access in two directions ▪▪Accepts ring terminals ▪▪Optional push button waterproof boots or dress nuts can be installed over cover ▪▪CLB circuit breakers sold separately (see page 38)
Combines an ignition protected fuse block and integrated connecting plugs. It consolidates seven circuits from 1A-200A, eliminates loose wires, and protects fuses from explosive fumes. ▪▪Three 30A-200A MIDI fuses for high-amp circuits including panel feeds, windlasses, and stereo amplifiers ▪▪Four 1A-20A ATO/ATC fuses ideal for circuits including bilge pumps, alarms, and clock memory ▪▪Sealed cover protects fuses from the harsh marine environment: IP66 rating-protected against powerful water jets ▪▪Integrated connector plugs eliminate loose wires and provide a secure, waterproof connection ▪▪Fuses sold seperately ▪▪4” x 5-3/4”
Positions
Neg. Bus
Source
Height
BSS 5050
6
-
Independent
6.69”
BSS 5051
12
-
Independent
11.19”
BSS 5052
6
Yes
Common
6.69”
BSS 5054
12
Yes
Common
11.19”
Certifications & Agency Standards
▪▪Ignition protected fusing meets Coast Guard and ABYC requirements for installation on gasoline or diesel powered boats ▪▪Meets ISO 8846 ignition protection, and SAE J1171 external ignition protection requirements
BSS 7725
Blue Sea Systems Terminal Fuse Block
Blue Sea Systems Fuse Blocks ▪▪Clear insulating cover with label recesses for labels ▪▪Cover insulates conductive parts ▪▪Nickel plated metal components ▪▪Copper contacts give a 30 amp rating ▪▪Can use AGC, MDL and all other 3AG glass fuses ▪▪Max voltage: 32 BSS 5015 BSS 5018*
*Request Item
5015
AGC 6 circuit with ground bus AGC 6 circuit without ground bus
Consolidates up to six independently-sourced branch circuits in one compact fuse block. These blocks can be modified to combine circuits together. PN 9217 Terminal block jumpers (2 included) can be used on the source side of the fuse block. This allows one wire coming in to the fuse block to supply two or more loads, while maintaining separate fuse protection for each circuit. ▪▪Fuse blocks w/covers include 20 write-on circuit labels ▪▪Tin-plated copper buses and fuse clips ▪▪Accepts ring or spade type terminals ▪▪Accepts ATO and ATC fast acting blade fuses ▪▪H: 5.23” x W: 2.1” BSS 5035
▪▪Satisfies ABYC 7” circuit protection rule ▪▪Mounts on 3/8” battery post, battery switch, and bussbar terminals ▪▪Compact, high amp fuse - appropriate for DC main, inverter, windlass, and bow thruster circuit protection ▪▪Provides high current protection in tight spaces ▪▪Weatherproof - suitable for open cockpit areas ▪▪Insulating nut and cap prevents accidental shorts ▪▪Maximum volts: 58 VDC ▪▪Terminal stud: 1/4”-20 ▪▪L: 2.4” x W: .79” x H: 1.75” ▪▪Fuses sold separately (see below) BSS 5191
Fuse block
BSS 5175* BSS 5177
30 amp fuse 50 amp fuse
Accessories:
Blue Sea Systems Independent Sourced Circuit ST Blade Fuse Blocks
With cover
W E
Part #
N
Electrical / Electronics
36
*Request Item
37
Blue Sea Systems
Blue Sea Systems Maxi Fuses
BSS 5023
▪▪Tin-plated connector blades for corrosion resistance ▪▪Visible indication of blown condition
W
Amps
Colour
Pkg
BSS 5235100
1
Black
25
BSS 5236100
2
Clear
25
BSS 5237100
3
Pink
25
BSS 5239100
5
Tan
25
BSS 5240100
7.5
Brown
25
BSS 5240
7.5
Brown
2
BSS 5241100
10
Red
25
BSS 5241
10
Red
2
BSS 5242100
15
Blue
25
BSS 5242
15
Blue
2
BSS 5243100
20
Yelliow
25
BSS 5243
20
Yellow
2
BSS 5244100
25
Clear
25
BSS 5244
25
Clear
2
BSS 5245100
30
Green
25
BSS 5245
30
Green
2
BSS 5291 BSS 5292 BSS 5293 BSS 5294 BSS 5295 BSS 5296 BSS 5297 BSS 5298 BSS 5299
3 amp 5 amp 7.5 amp 10 amp 15 amp 20 amp 25 amp 30 amp 40 amp
Blue Sea Systems Weatherproof AGC Fuse Holder ▪▪Rated to 20 amps.@ 12 volts ▪▪Fuse not included BSS 5021
Blue Sea Systems AGC Fuses ▪▪Visible indication of blown condition ▪▪Fast acting ▪▪25/pkg BSS 5204100 BSS 5206100 BSS 5208100 BSS 5210100 BSS 5213100 BSS 5215100 BSS 5217100 BSS 5218100 BSS 5219100 BSS 5220100
1 amp 2 amp 3 amp 5 amp 7.5 amp 10 amp 15 amp 20 amp 25 amp 30 amp
W E
E
▪▪Tin-plated connector blades ▪▪Fast acting blade fuse ▪▪Max. voltage: 32VDC
ATC Fuses
EasyID illuminated ATC blade fuses use LED technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. ▪▪Replaces non illuminating ATO or ATC fuses ▪▪Tin-plated connector blades ▪▪Max. voltage: 32VDC ▪▪2/pkg N
Blue Sea Systems ATO/ATC Fuses
Part #
Blue Sea Systems Easy ID
30 amp 40 amp 50 amp 60 amp 70 amp 80 amp
N
5138 5139 5140 5141 5142 5143
Electrical / Electronics
▪▪Easy to install 4 ATO/ATC fused circuits ▪▪Mounts on the battery terminal stud ▪▪Screw terminals for securing wires ▪▪Four nylon insulated ring terminals included ▪▪Insulating cover included ▪▪Accepts Small Format circuit labels ▪▪Includes 1 fuse ▪▪Maximum amperage: 100A per block, 30A per circuit ▪▪Mounting: clearance for 3/8” [M10] stud ▪▪Screw terminal type: #8-32 Screws with captive star lock washer
BSS 5006
BSS BSS BSS BSS BSS BSS
W E
▪▪For 30 - 80 amp fusing ▪▪Terminal cover insulates all conductive parts ▪▪Accepts wire sizes up to 4 ga. ▪▪For use on systems up to 32 V DC ▪▪Max. 80 amps ▪▪10/32” screw terminals ▪▪W: 2.015” x H: 2.89” ▪▪Fuses sold separately (see below)
N
Blue Sea Systems Battery Mount Fuse Block
Blue Sea Systems Maxi Fuse Block
38
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems Push Button Reset Only CLB Breakers Low cost circuit breaker in a compact design enables high density protection configurations. “Trip free” cannot be held closed after trip. Max. voltage: 28 DC
Blue Sea Systems AC Flat Rocker Circuit Breaker
BSS 7054 BSS 7056 BSS 7057 BSS 7058 BSS 7059 BSS 7061
10 amp 15 amp 20 amp 25 amp 30 amp 40 amp
▪▪30A double pole residual current circuit breaker (ELCI) ▪▪Provides over current and leakage protection per ABYC E-11 for whole boat shore power protection ▪▪Meets UL 1500 external ignition protection requirements ▪▪Trips on short circuit, overload, or leakage to ground ▪▪Front panel mount-installed in a power distribution panel
BSS 4135
Clear boot cover
Parts:
BSS 3102100
Blue Sea Systems Bussmann Series Circuit Breakers Blue Sea Systems A-Series Flat Rocker AC/DC Circuit Breakers ▪▪Rocker actuator is flush in the ‘ON’ position ▪▪Colour actuator indicates ‘OFF’ position ▪▪‘Trip Free’ design cannot be held ‘ON’ ▪▪Prevents accidental switching of 24 hour circuits ▪▪ON/OFF symbols support vertical or horizontal mounting ▪▪W 2.31" x H .75"
BSS 7406
30 amp
Interrupt Rating............................. 5,000 amp Maximum Voltage......................... 32 VDC Circuit Breaker Type..................... Magnetic Hydraulic—Trip free Operating Temperature Range..... -40°C to +85°C Terminal Screw............................. 30° Angled #10-32 Stainless Steel Recommended torque 14-15 in-lb Rated Switch Cycles.................... 10,000 @ rated amperage/voltage Mounting Screw............................ #6-32 Stainless Steel Recommended torque 6-8 in-lb
▪▪Combines switching & circuit protection ▪▪All components meet SAE J1171 requirements ▪▪Clear, single lever operation ▪▪“Trip Free” design ▪▪Vapor-proof/waterproof ▪▪Recessed mounting holes for clean appearance ▪▪Self-trimming case ▪▪Large clearance around terminal studs ▪▪Robust 5/16” terminals ▪▪70XX Series - H: 3.386” x W: 2.26” x D: 2.45” ▪▪Cutout: 2.125” ▪▪71XX Series - H: 3.439” x W: 2.323” x 1.797” Surface Mount
Panel Mount BSS 7036 BSS 7038 BSS 7039 BSS 7041 BSS 7042 BSS 7044 BSS 7048
30 amp 40 amp 50 amp 70 amp 80 amp 100 amp 150 amp
Blue Sea Systems Single Pole AC/DC Magnetic Breakers Combines switching & circuit protection into a single device A Series breakers. White. BSS 7202 BSS 7204 BSS 7206 BSS 7208 BSS 7210 BSS 7214 BSS 7218 BSS 7222 BSS 7238 BSS 7230
5, White 10, Black 10, White 15, Black 15, White 20, White 25, White 30, White 30, White 50, White
Operating Temp Range:........-40 degrees C to +85 degrees C Rated Switch Cycles:............10,000 @ rated amperage and voltage Maximum Voltage Rating:.....277 Volts AC, 65 VDC Mounting Screw:....................#8-32 - Recommended torque 6-8 lbs Circuit Breaker Type:.............Magnetic Hydraulic - trip free Terminal Screw:.....................#10-32 S/S with tooth lock washer Recommended torque 14-15 in-lb
BSS 7136 BSS 7138 BSS 7139 BSS 7140 BSS 7141 BSS 7142 BSS 7144 BSS 7146 BSS 7148
30 amp 40 amp 50 amp 60 amp 70 amp 80 amp 100 amp 120 amp 150 amp
Case Material ...............Thermoset Polyester Amperage.....................25-150 amperes Voltage Rating .............48 volts DC Maximum Interrupt Rating.............5,000 amperes@12 VDC 3,000 amperes@24 VDC 1,500 amperes@42 VDC
Blue Sea Systems Panel Accessories Black breaker screws fit all single and double pole A, B and C circuit breakers. BSS 8035 6/pkg
7039
7139
Blue Sea Systems Blue Sea Systems Vessel Systems Monitor VSM 422
▪▪Visible reset lever shows open condition ▪▪Ignition protected - Safe for installation aboard gasoline powered boats ▪▪Meets SAE J1171 external ignition protection requirements ▪▪Weather Resistant ▪▪Combines switching and circuit breaker function into one unit ▪▪”Trip Free” - cannot be held closed after trip
▪▪Three intuitive display modes ▪▪Flexible case design offers three mounting options ▪▪Fully programmable legends and adjustable alarm functions can be customized to fit every boat
Panel Mount
Surface Mount
Amps
-
BSS 7182
40
-
BSS 7183
50
-
BSS 7184
60
-
BSS 7185
70
-
BSS 7186
80
BSS 7087
BSS 7187
100
-
BSS 7188
120
BSS 7089
BSS 7189
150
▪▪Monitors DC systems —voltage, amperage, battery state
of charge - amp hours remaining, time remaining, % charge, battery temperature (alarms for all values) ▪▪Monitors AC systems —voltage, amperage, watts, frequency (alarms for voltage, amperage, and frequency) Panel Mount
Surface Mount
▪▪Included in retail packaging—head unit, surface mount bezel, surface mount gasket, DC current shunt 8255, AC current transformer 8256, battery temperature sensor 1820, connectors, and mounting screws ▪▪Monitors tank levels —fuel, water, waste, (alarms for high level waste, low level fuel, and water) *Senders are optional* ▪▪Monitors bilge —active, cycle count, volume, duration (alarms for cycles, volume, duration) ▪▪W: 4.5” x H: 3” x D: 1” BSS 1800
Blue Sea Systems Ultrasonic Tank Senders ▪▪Accurate - used with the Vessel Systems Monitor 1810 VSM 422 PN 1800 above—can be precisely calibrated for each tank ▪▪Reliable - SSI Technologies, Inc. Fluid-Trac is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss ▪▪Digital filtering - eliminates errors due to liquids sloshing in mobile tanks BSS 1810 BSS 1811*
*Request Items
Diesel, water or waste, max tank depth 32" Gasoline only, max tank depth 24”
Electrical / Electronics
Blue Sea Systems Bussmann 285 Series Circuit Breakers
39
40
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems Water Resistant DC Circuit Breaker Panels ▪▪Designed for fly bridge and open cockpit applications ▪▪Rated IP66 - “Use on ship decks” ▪▪Ignition protected - safe for installation aboard gasoline powered boats ▪▪Installed switch is ON-OFF ▪▪Push button circuit breaker with waterproof boot ▪▪Heavy 1/8” aluminium material ▪▪Two-part polyurethane white finish ▪▪Water resistant Contura switches ▪▪“ON” indicating LEDs embedded in switch ▪▪Watertight mounting gasket ▪▪Mil-spec chemical treatment to protect from corrosion ▪▪Includes set of 60 common DC labels ▪▪4.25” x 5.25” BSS 8272* Arctic White BSS 8372 Black
* Request Item
Blue Sea Systems Vertical Water Resistant DC Fuse Panels ▪▪Specifications match the vertical panels ▪▪Includes set of 60 common DC labels ▪▪Designed for height restricted installations ▪▪Rated IP66 - “Use on ship decks” NOTE: Water resistant panel labels are not back-lightable BSS 8262 BSS 8261*
4 position, 3.75" x 5.25" 8 position, 3.75" x 9.385"
* Request Item
Blue Sea Systems Water ResistantBilge Pump Control Panel Specifications match the above
NOTE: Water resistant panel labels are not back-lightable Voltage:........................................ 12 or 24 volts DC Switch Rating:.............................. 20 amperes @ 12 volts DC 15 amperes @ 24 volts DC Switch LED amperage Draw:....... 18 Milliamperes Circuit Breaker Rating:................. 15 amperes Panel Cumulative Rating:............. 45 amperes
BSS 8263
(ON)-OFF-AUTO, 3.75" x 2.25"
Blue Sea Systems Waterproof Contura Switches ▪▪Vibration, shock, thermo-shock, moisture and salt spray resistant ▪▪Specially manufactured for mounting in Blue Sea Systems’ water resistant panels ▪▪Ignition protected - safe aboard gasoline powered boats ▪▪Meets UL1500 and ISO8846 ignition protection requirements Part# Grey
Part# Black
Action
LED's
BSS 8230
BSS 8282
SPST, OFF ♦ ON
1
OFF ♦ (ON)
0
BSS 8283
SPDT, ON ♦ OFF ♦ ON
2
SPDT, (ON) ♦ OFF ♦ ON
1
BSS 8231
Blue Sea Systems Horizontal Water Resistant DC Fuse Panels Designed for fly bridge and open cockpit applications: ▪▪Water resistant fuse holders accept commonly available AGC (fast acting) and MDL (slow blow) glass fuses ▪▪Rated IP66 - “Use on ship decks” ▪▪Installed switch is ON-OFF ▪▪Heavy 1/8” aluminium material ▪▪Two-part polyurethane slate gray finish ▪▪Water resistant Contura switches ▪▪“ON” indicating LEDs embedded in switch ▪▪Includes set of 30 common DC labels ▪▪Watertight mounting gasket ▪▪Mil-spec chemical treatment to protect from corrosion NOTE: Water resistant panel labels are not back-lightable BSS 8054 BSS 8053
3 position, 3.75" x 5.25" 6 position, 7.50" x 5.25"
Voltage:..............................12 or 24 volts DC Switch Rating:....................20 amperes @ 12 volts DC 15 amperes @ 24 volts DC Switch LED amp. Draw:.....18 Milliamperes Fuse Holder Rating:...........20 amperes max.
BSS 8233 BSS 8234
(ON) ♦ OFF ♦ (ON)
0
BSS 8220
DPDT, (ON) ♦ OFF ♦ ON
1
Blue Sea Systems WeatherDeck Water Resistant DC Panels ▪▪Designed for fly bridges and open cockpits ▪▪Made from corrosion resistant materials ▪▪Independent label back-lighting circuit for remote switching and dimming ▪▪UV stabilized and weather resistant face plate ▪▪Rated IP67 - “temporary immersion” ▪▪Rugged UV stabilized waterproof boots Each panel can be mounted in four different orientations ATO/ATC blade fuse protects each circuit BSS 4304 BSS 4306 BSS 4308
4 fuse, Grey 6 fuse, Grey 8 fuse, Grey
3.88" x 4.30" 3.88" x 6.00" 3.88” x 7.70”
Thermal Reset Only Circuit Breaker protects each circuit BSS 4376*
*Request Item
6 breaker, Grey
4.5" x 6.00"
4306
Blue Sea Systems
Blue Sea Systems AC Circuit Breaker Panels
▪▪All positive, negative and grounding buses installed, fully pre-wired ▪▪Includes set of 30 common DC labels ▪▪Label back-lighting pre-installed ▪▪All LEDs installed ▪▪Slate grey aluminium panel ▪▪Voltage: 12/24V DC Part#
Description
WxH
Installed 15A Breakers
BSS 8023
8 Position
5.25” x 7.50”
5
BSS 8025
3 Position
5.25” x 3.75”
3
These panels are designed as branch circuit breaker panels to work in conjunction with AC main panels. ▪▪All hot, neutral and safety ground buses installed, fully pre-wired ▪▪Label back-lighting pre-installed ▪▪Detailed installation instructions and cutout template ▪▪All LEDs installed ▪▪Maximum panel amperage - 100 amps Part #
Circuits
Breakers Installed
Dimensions
BSS 8059
8
5
7.5” H x 5.25” W
BSS 8058
3
3
3.75” H x 5.25” W
Blue Sea Systems AC Rotary Switch
8027
8029
▪▪Red reverse polarity indicating LED’s ▪▪Green power available indicating LED’s ▪▪Accepts standard BSS backlight labels ▪▪Max. Amperage 30 ▪▪Max. Voltage 600VAC ▪▪H: 3.75" x W: 5.25"
8043
Blue Sea Systems AC Main Circuit Breaker Panels
BSS 8367
▪▪Slate grey aluminium panel ▪▪Red reverse polarity indicating LED ▪▪Hot, neutral and safety ground buses installed, fully pre-wired ▪▪All LEDs installed ▪▪Maximum panel amperage - 50 amps ▪▪120 volt Part #
Description
WxH
15A Sgl Pole
30A Dble Pole
BSS 8027
Main & 6 Pos
5.25” x 7.50”
3
1
BSS 8029
Main & 1 Pos
5.25” x 3.75”
-
1
BSS 8043
Main & 3 Pos
5.25” x 7.50”
3
1
BSS 8077
Main Only
2.63” x 3.75”
-
1
Blue Sea Systems AC Source Selector Panel ▪▪Slate grey aluminum panel ▪▪Two double pole 30 amp breakers ▪▪Lockout slide permits connection of only one power source to the system ▪▪Dimensions: 3.75” H x 5.25” W BSS 8032
Blue Sea Systems Panel ▪▪3 position, vertical circuit breaker panel ▪▪Designed for flybridge and open cockpit applications ▪▪Panel front is rated IP66-Protected against powerful water jets ▪▪Ignition protected-safe for installation in gasoline powered boats ▪▪ON-OFF Contura Switches ▪▪ON indicating LEDs embedded in switch ▪▪Watertight mounting gasket ▪▪Push Button Reset-Only circuit breakers with waterproof boots ▪▪W: 4.5” x H: 3.75” BSS 8374
Electrical / Electronics
Blue Sea Systems DC Toggle Circuit Breaker Panels
41
Electrical / Electronics
42
Blue Sea Systems
Blue Sea Systems Panel Mounted Toggle Switches
Blue Sea Systems Circuit Breaker Mounting Panel
▪▪For applications such as starters, bilge pumps, wipers, lights, etc. ▪▪Easily mounts into standard 5/8" circuit breaker mounting hole ▪▪Nickel plated brass and phenolic noncorrosive construction
▪▪Mounts A-Series double pole toggle circuit breakers ▪▪1/8” aluminum 5052 alloy ▪▪Accepts Blue Sea Systems’ large format panel label ▪▪2-5/8" x 3-3/4"
BSS 8204 SPST/OFF-ON BSS 8207 SPDT/(ON)-OFF-ON
BSS 8173
Blue Sea Systems Lexan Label Sets
Blue Sea Systems WeatherDeck Toggle Switches ▪▪Specially manufactured by Carling for use in Blue Sea Systems’ WeatherDeck Panels ▪▪Nickel-plated brass and phenolic non-corrosive construction ▪▪Rated 15 amp @ 12VDC ▪▪1/2” dia cutout
4150
4155
Part
Action
Pole/Throw
BSS 4150
OFF ♦ ON
SPST
BSS 4151
OFF ♦ (ON)
SPST
BSS 4152
ON ♦ OFF ♦ ON
SPDT
BSS 4153
(ON) ♦ OFF ♦ ON
SPDT
BSS 4154
(ON) ♦ OFF ♦ (ON)
SPDT
BSS 4155
ON ♦ OFF ♦ ON
DPDT
( ) = Momentary
Parts:
BSS 4138
Waterproof boot
Rating
10A @ 250VAC 15A @ 125VAC 15A @ 12VDC
5A @ 30VDC
BSS 8030*
DC basic label set comes with:
Accessory Bilge Pump Depth Sounder Fan GPS Lights Radar Sailing Instruments Steaming Light Tri Colour Light
Anchor Light Blower Electronics Foredeck Lights Horn Macerator Pump Refrigerator Spare Stereo VHF
BSS 8031*
AC basic label set comes with:
Blank Entertainment Centre Accessory FWD Cabin Lights AFT Cabin Lights FWD Cabin Outlets AFT Cabin Outlets Galley Air Conditioner Galley Outlets Air Conditioner 2 Heater Appliances Inverter Battery Charger Lights Cabin Outlets Macerator Pump Computer Main Cabin Lights
* Request Items
Autopilot Compass Light Engine Instruments FWD Cabin Lights Knot meter Main Cabin Lights Running Lights Spreader Lights Strobe Light Water Pressure
Main Cabin Outlets Microwave Outlets Refrigerator Spare Stove TV/Stereo VCR Washer/Dryer Water Heater
Blue Sea Systems Blue Sea Systems Panel Backlight Back light system is easily installed in any Blue Sea Systems circuit breaker panel. The 8065 module is adaptable to a 8, 5 or 3 position panel. ▪▪6" 18 AWG wire leads ▪▪5 milliwatt draw 12 VDC, 8/5/3 position
Blue Sea Systems Panel Backs Panel backs insulate the backside of electrical panels that protrude into lockers, machinery spaces and living areas. They are made from black ABS thermoplastic and can be easily drilled to provide wire exits. 3" deep. BSS 4026 BSS 4027
5.25” x 3.75” 5.25” x 7.50”
Blue Sea Systems LED Indicator Lights ▪▪Easily installed in any Blue Seas panel ▪▪Simple push-in installation mounts in any thickness material BSS 8033 BSS 8171 BSS 8172
Amber Red Green
12/24 volt 12/24 volt 12/24 volt
BSS 8034 BSS 8066
Green Red
120 volt 120 volt
Blue Sea Systems Toggle Guard Protect your circuit breakers against being accidentally switched ON or OFF. Can be used on any brand of circuit breaker panel using standard A or B-Series circuit breakers. Made from glassfilled nylon. Mounting hole accepts #6 flat head screws (included). BSS 4100
Blue Sea Systems AC Lockout Slide Allows only 1 of a pair of double-pole AC circuit breakers to be activated at a time, guaranteeing that AC power from 2 sources will not be mixed. Fits all double pole A and B series circuit breakers. BSS 4125
Blue Sea Systems DC Analog Ammeters These analog meters can be surface or flush mounted in a Blue Sea panel. ▪▪Simple 2-wire connection from shunt, no other power required ▪▪Meter senses and powers from shunt connection ▪▪Packaged with shunt (except 8005 with internal shunt) ▪▪H: 2.375 x W: 2.625 BSS 8005 BSS 8022
0-25 amp DC 0-50 amp DC
Blue Sea Systems Analog DC Voltmeter ▪▪Displays to .2 volt ▪▪Draws only 1 milliamperes ▪▪Accurate to 3% of scale range ▪▪H: 2.375 x W: 2.625 BSS 8003
8-16 VDC
Electrical / Electronics
BSS 8065
43
44
Blue Sea Systems Blue Sea Systems Terminal Blocks
Electrical / Electronics
Blue Sea Systems Power Bars Fabricated from a solid block of CDA110 copper. 8-32 terminals on the bus ends provide attachment points for smaller circuits. All metal components are tin plated for corrosion resistance and superior conductivity. ▪▪Rated at 600 amps continuous duty, max. 48 volts DC ▪▪Polycarbonate base BSS 2104 BSS 2107
4 x 3/8” -16 stud terminal, Length: 7” 8 x 3/8” -16 stud terminal, Length: 11.375
Blue Sea Systems Maxi Bus Bars ▪▪Rated 250 amps continuous ▪▪Max. 48 VDC ▪▪Tinned plated copper ▪▪Mounting holes: #10 screws Part #
2126
Screws
Studs
Dimensions
2 x 5/16”-18
7.75" x 1.5"
BSS 2126
-
6 x 5/16”-18
7.75” x 1.5”
The 4.2" long mini bus was designed for mounting in tight spaces. All conductive components are tin plated copper. ▪▪Mounts with 2 #10 screws ▪▪100 amps continuous ▪▪Max. 48 VDC ▪▪Dimensions: 7/8" x 4-3/16"
BSS 2305
Terminal
BSS 2300
10 x 8-32
1.25” x 6.1”
Screw
BSS 2301
10 x 8-32
1.25" x 6.1"
Screw
BSS 2302
20 x 8-32
1.25" x 9.25"
Screw
BSS 2303
4 x 1/4”
1.25" x 6.1"
Stud
Recommend for all positive connectors on board. Heavy gauge red ABS. BSS 2715
Fits 2301/2303 bus bar
The Dual Bus provides two isolated busses to provide both positive and negative circuits on the same block. ▪▪Tin plated copper ▪▪Current rating: 100 amps, max. 48 volts DC ▪▪#10 mounting holes, #8/32 mounting screws
2314
BSS 2701 BSS 2702
Size/Type
Terminal
Dimensions
8/32" Screw
5
.875" x 4.2"
Same as above, complete with cover 10/24" Stud
4
▪▪Continuous amperage: 250 AC/DC ▪▪Voltage rating: 300 VAC Max / 48 VDC Max ▪▪Bus material: tin-plated copper ▪▪Base material: reinforced polycarbonate ▪▪Cover material: ABS ▪▪4 x 5/16” -18
5+/5-, 3.01” x 1.85” 10+/10-, 5.06” x 1.85”
Covers:
2305
Blue Sea Systems Stud Terminal
BSS 2127
Dimensions
Blue Sea Systems Dual Bus Bar
Blue Sea Systems Mini Bus
BSS 2314
Circuits
Blue Sea Systems Insulating Cover
12 x #10-24
BSS 2304
Part #
2105
BSS 2105
Part #
Bus bars are used to consolidate multiple negative wires or to create a positive bus for feeding multiple circuits. The copper bus is tin plated for corrosion resistance and superior conductivity. Two brass 1/4-20 stud connectors with oversize brass hex nuts provide attachment for the main feed or ground cables. ▪▪130 amps continuous ▪▪Max. 48 VDC
.875" x 4.2"
BSS 2709
Cover for 2701
45
Blue Sea Systems Blue Sea Systems Independent Terminal Blocks
2408
Part #
Circuits
amps
Screw
Dimensions
BSS 2402*
2
20
#6
11/16" x 1-7/16"
BSS 2404
4
20
#6
11/16" x 2-1/8"
BSS 2406
6
20
#6
11/16" x 2-7/8"
BSS 2408
8
20
#6
11/16" x 3-3/4"
BSS 2410
10
20
#6
11/16" x 4-1/2"
BSS 2502
2
30
#8
1-5/16" x 2-1/16"
BSS 2504
4
30
#8
1-5/16" x 3-3/16"
BSS 2506
6
30
#8
1-5/16" x 4-5/16"
BSS 2508
8
30
#8
1-5/16" x 5-1/2"
BSS 2510
10
30
#8
1-5/16" x 6-5/8"
8
3/8”
#10
BSS 1991
12
3/8”
#10
BSS 1992
8
5/16”
#10
BSS 1993
12
5/16”
#10
Provides a waterproof side entry for antenna cables without requiring removal of the factory installed connector. ▪▪Simple one-piece design for easy side mount installations ▪▪Low profile, contoured edge reduces the risk of tangling lines ▪▪#1007100 includes a polished stainless steel dress cap, which conceals mounting hardware, matches other deck hardware and offers protection from UV ▪▪Includes all fasteners ▪▪Max. cable diameter: .28” BSS 1007 BSS 1007100
W
BSS 1990
1/4" stud, 5 x 10/32 screw terminal
E
Mount
▪▪Combines negative and positive buses on one block ▪▪Clear lexan lid meets ABYC insulation requirements
N
Stud Size
Dual Bus Plus
Blue Sea Systems Side Entry Cable Clams
W
Studs
Blue Sea Systems Dual Bus Plus
BSS 2722
E
Part #
2500 Series, 5/pkg 2400 Series, 5/pkg
▪▪Continuous amperage 150 amperes DC/130 amperes AC ▪▪Voltage rating 48 volts DC maximum ▪▪300 volts AC maximum ▪▪Bus material tin-plated copper ▪▪Base material ABS ▪▪Cover material clear polycarbonate ▪▪4.875” x 2.58”
N
Complex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks. ▪▪Tin plated pure electrical copper for maximum conductivity ▪▪Stepped bus design offers two elevations for 1990 conductors which doubles the density of the wire loom compared to traditional bus bars ▪▪Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need 1991 for connecting cables ▪▪One-piece serrated flange nuts ensure correct and secure connections ▪▪Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires ▪▪Busbar may be cut to a shorter length to 1992 accommodate constricted spaces ▪▪Bi-directional busbar end caps allow the ganging of additional busbars ▪▪Snap on insulating cover meets ABYC and USCG requirements and includes label 1993 recess ▪▪Continuous Rating: 1000A ▪▪Bus Material: Tin-Plated Copper C11000
BSS 9217 BSS 9218
Specification:
*Request Item
Blue Sea Systems Powerbars
These handy tinned brass circuit jumpers can be used to common one or more circuits on Series #2400 & #2500 independent connector blocks.
Electrical / Electronics
Our independent connectors are the highest quality terminal blocks. They are closed back, which unlike the cheaper open back styles, provide 2508 complete electrical and moisture insulation from the mounting surface. Metal components are nickel plated brass. Screws are combination head phillips/slot type. 2400 series have high temperature nylon bases, rated to 300V. The 2500 Series have phenolic bases, rated to 600V.
Blue Sea Systems Independent Connector Jumpers
With stainless cap
Blue Sea Systems Cable Clams Cable Clams allow a waterproof through deck installation of LORAN, GPS and other cables. Cable Clams fit any size cable and are easily installed through the use of a seal that can be easily drilled, slit, slipped over the cable and then compressed inside the Cable Clam. The cable can be quickly removed and the deck ring sealed with the waterproof screw plug. ▪▪Available with a polished stainless steel dress cap, which conceals mounting hardware, matches other deck hardware Standard and offers protection from UV Standard Part #
Stainless Part #
Stainless
Max. Cable
Outside Diameter
Height
1-3/4"
7/8"
BSS 1001
BSS 1001100
.31"
BSS 1002
BSS 1002100
.44"
2"
7/8"
BSS 1003
BSS 1003100
.56"
2-1/2"
1-3/16"
46
Blue Sea Systems N
Blue Sea Systems Battery Mount Busbars
W E
Electrical / Electronics
▪▪Maximum voltage: 32 VDC ▪▪Continuous rating: 100 ADC ▪▪Bus material: Tin-plated copper C11000 ▪▪Mounting hole: Clearance for 3/8 [M10] stud ▪▪Screw terminal : #8-32 screws with captive star lock washer BSS 2340
Power Posts can be used on either the positive cables to branch out to the increasing number of high amperage appliances on modern boats or on negative cables as a convenient ground cable collection point. ▪▪Insulator cap protects against accidental grounding ▪▪Base is glass filled black nylon ▪▪Not rated ▪▪Max. 48 VDC Size
Description
BSS 2011
Small
1/4” x 3/4” Stud
BSS 2002
Large
5/16” x 7/8” Stud
BSS 2003
Large
3/8” x 7/8" Stud
1/4” x 1” Stud
BSS 2102
5/16” x 3/4” Stud
BSS 2103
3/8” x 3/4” Stud
Blue Sea Systems Dual Power Post Connectors ▪▪Max Voltage Rating: 48 Volts DC ▪▪Mounting holes #10 screws ▪▪Designed for high amp conductors ▪▪Includes one black and one red insulator ▪▪For outboard engine installation when factory cables need to be extended ▪▪L: 2.75” x W: 1.875” x H: 1.75” BSS 2017 BSS 2018
2 x 3/8” terminal studs 1 x 5/16” & 1 x 3/8” terminal studs
Colour
3
Red
BSS 4010
8-4
2
Red
BSS 4011
8-4
2
Black
BSS 4012
2-2/0
1
Red
BSS 4013
2-2/0
1
Black
BSS 4014
3/0-4/0
1
Red
BSS 4015
3/0-4/0
1
Black
Blue Sea Systems Cable Caps ▪▪For batteries with integral marine terminals ▪▪For single cable only ▪▪Rotating tops allow cable leads at any angle Part #
BSS 4001
Gauge
Opening
Colour
4, 2, 1
1/2"
Red/Black
W
BSS 2101
Pkg. Qty.
18-10
E
Description
Cable Size
BSS 4008
N
Power Post + has eight 8-32 brass screws which provide a common distribution bus for branch circuits. Power Post + is useful as a general purpose common distribution bus and battery cable connector, especially for connecting sensitive electronics near batteries. ▪▪150 amps continuous ▪▪Max. 48 VDC Part #
Cable cap stud insulators are made in four sizes to fit any cable and have large terminal openings to fit over marine ring terminals. The molded PVC is recognized under the UL Components program and is elastic enough to enable standard cable caps to be installed after terminals have been crimped on the cables. Part #
Blue Sea Systems Power Posts
Part #
Blue Sea Systems Cable Cap Insulators
Standard for use with automotive batteries with add on marine terminals. Part #
Gauge
Opening
Colour
BSS 4005
4, 2, 1
1/2"
Red/Black
Blue Sea Systems Automotive Cable Cap The molded PVC is recognized under the UL Components program and is elastic enough to enable standard cable caps to be installed after terminals have been crimped on the cables. ▪▪Sold in pairs Part #
BSS 4016
Cable Size
Colour
4, 2, 1
Red/Black
Blue Sea Systems Battery Box These heavy wall polyethylene battery boxes. They feature straight cable entry path, embedded hold down nuts and stainless steel hold down bolts for the lid. ▪▪Fits golf cart batteries ▪▪Inside dim: L: 14.75” x W: 10.75” x H: 11.5” ▪▪Outside dim: L: 18.25” x W: 14.25” x H: 13.5” BSS 4021
47
Blue Sea Systems
Protect Your Boat
Scan to use the online Circuit Wizard
With the Correct Size Wire and Fuse
STEP 1 Choose the Correct Wire
D
Select the CIRCUIT TYPE. • Non-critical circuits with 10% allowable voltage drop include: general lighting, windlasses, bait pumps, general appliances • Critical circuits with 3% allowable voltage drop include: panel main feeders, bilge blowers, electronics, navigation lights Find the CIRCUIT LENGTH along the left side of the WIRE SELECTION CHART. • The circuit length is the length of the negative wire added to the length of the positive wire. • Calculations are based on 105°C wire. For wire rated at 90°C or lower, or for wire that passes through an engine room, the first row of the chart, in gray, does not apply. Intersect the CURRENT FLOW IN AMPS with CIRCUIT LENGTH to identify the correct wire size. Example: A windlass rated 80A is 25 ft. from the battery. The circuit length is the total length of the positive and negative wire added together, which in this example is 50 ft. The circuit type is ‘non-critical’, and the correct wire size is 4 AWG.
WIRE SELECTION CHART
Calculations are based on 105°C wire. For more detailed calculations, consult the Circuit Wizard at www.circuitwizard.bluesea.com
CIRCUIT TYPE Non-Critical Critical
CIRCUIT LENGTH
DROP 10% VOLTAGE
CURRENT FLOW IN AMPS
DROP 3% VOLTAGE
0 to 20 ft
0 to 6 ft
30 ft
10 ft
50 ft
15 ft
65 ft
20 ft
80 ft
25 ft
100 ft
30 ft
130 ft
40 ft
165 ft
50 ft
200 ft
60 ft
16 AWG
14 AWG
14 AWG
12 AWG
14 AWG
12 AWG
12 AWG
10 AWG
12 AWG 14 AWG 12 AWG
10 AWG
10 AWG
8 AWG
10 AWG
6 AWG
6 AWG
8 AWG
8 8 AWG
4 AWG
6 AWG
6 AWG
6 AWG 4 AWG
4 AWG
4 AWG
2 AWG
1 AWG
2 AWG
1 8 AWG
0 AWG
8
1 8 AWG
1 8 AWG
0 AWG
1 8 AWG
1 8 AWG
0 AWG
0 AWG
1 8 AWG
0 AWG
0 AWG
2|0 AWG
2|0 AWG
2|0 AWG 3|0 AWG
2|0 AWG 3|0 AWG
1 8 AWG
0 AWG
2|0 AWG
3|0 AWG
3|0 AWG
1 8 AWG
0 AWG
2|0 AWG
0 AWG
2|0 AWG
3|0 AWG
2 AWG
4 AWG 2 AWG
4 AWG
2 AWG 2 AWG
1 AWG
4 AWG
2 AWG
6 AWG
2 AWG 2 AWG
6 AWG
8
4 AWG 4 AWG
6 AWG
2 AWG
3|0 AWG
3|0 AWG
4|0 AWG
4|0 AWG
2|0 AWG
3|0 AWG 4|0 AWG
4|0 AWG
4|0 AWG
4|0 AWG
4|0 AWG
2 AWG
4 AWG
0 AWG
2|0 AWG
3|0 AWG
3|0 AWG
4|0 AWG
4|0 AWG
2 AWG 1 AWG
0 AWG
2 AWG
130 ft
10 AWG
4 AWG
1 AWG
100 ft
120 ft
6 AWG
4 AWG
8 AWG
8 8 AWG
8 8 AWG
6 AWG
90 ft
110 ft
10 AWG
8 AWG
70 ft 80 ft
16 AWG
2|0 AWG
WIRE SIZE CHART Black circles indicate actual diameter of wire (not including insulation) 16 AWG
14 AWG
12 AWG
10 AWG
8 AWG
6 AWG
4 AWG
2 AWG
1 AWG
0 AWG
2|0 AWG
3|0 AWG
U.S. Coast Guard and other regulatory agencies require all circuits, except the starting circuit, to be protected with a circuit breaker or a fuse. For additional informaiton consult the Circuit Wizard at www.circuitwizard.bluesea.com © Copyright 2012 Blue Sea systems Inc. All rights reserved. Unauthorized copying or reproduction is a violation of applicable laws.
4|0 AWG
Electrical / Electronics
A B C
Locate the CURRENT FLOW IN AMPS of your circuit along the top of the WIRE SELECTION CHART.
48
Blue Sea Systems
STEP 2 Choose the Correct Fuse and Fuse Amperage
Example: For a 4 AWG single 105°C rated wire outside an engine room, the fuse amperage is 150A Note: Possible fuse amperages for a circuit can fall between a range of maximum and minimum fuse amperages. The procedure above calculates the maximum fuse amperage which reduces nuisance blows but may offer less protection than a lower amperage fuse. The minimum fuse amperage is calculated by multiplying the current flow in amps by 125%. If the product instructions specify a fuse amperage, use that value if it is under the maximum amperage found in the above procedure. If the specified fuse amperage is over the maximum suggested, move down the column and choose the wire size that intersects with the specified fuse amperage.
FUSE SELECTION CHART
Calculations are based on 105°C wire. For lower temperature rated wire, consult the Circuit Wizard at www.circuitwizard.bluesea.com
L E G E ND Outside Engine Room Inside Engine Room
.25A to 30A SINGLE WIRE
16 AWG
AW G W I R E S I Z E
Electrical / Electronics
A B
Choose a fuse from the list on the top of the FUSE SELECTION CHART by following along the line of the AWG WIRE SIZE determined from Step 1. Appropriate fuses will have a gray bar that intersects the line. The appropriate fuse amperage will be found in one of the four gray bars below the selected fuse type. Single Wire, Outside Engine Room = First column dark gray bar Single Wire, Inside Engine Room = First column light gray bar Bundled Wire, Outside Engine Room = Second column dark gray bar Bundled Wire, Inside Engine Room = Second column light gray bar Calculations are based on 105°C wire. For wire rated at 80°C or lower, use the fuse amperage for the next smaller wire size.
BUNDLED WIRES
1A to 30A SINGLE WIRE
BUNDLED WIRES
30A to 80A SINGLE WIRE
BUNDLED WIRES
30A to 200A
30A to 300A
100A to 300A
225A to 400A
35A to 400A
SINGLE WIRE
SINGLE WIRE
SINGLE WIRE
SINGLE WIRE
SINGLE WIRE
BUNDLED WIRES
BUNDLED WIRES
BUNDLED WIRES
BUNDLED WIRES
BUNDLED WIRES
25A 20A 20A 15A 25A 20A 20A 15A
14 AWG
30A 25A 20A
12 AWG
30A 25A
30A 25A 20A 30A 30A 30A 25A 50A 40A 30A
30A 30A
30A 30A
50A 40A 30A
50A 40A 30A
35A
10 AWG
60A 50A 40A 40A 60A 50A 40A 40A 60A 50A 40A 40A
50A 40A 40A 35A
8 AWG
80A 70A 60A 50A 80A 70A 60A 50A 80A 70A 60A 50A
80A 60A 50A 40A
6 AWG
130A 100A 70A 60A
80A 70A 125A 100A 80A 70A 125A 100A 80A 70A 125A 100A
4 AWG
150A 125A 125A 100A 150A 125A 125A 100A 150A 125A 125A 100A
2 AWG
200A 175A 150A 125A 200A 175A 150A 125A 200A 175A 150A 125A
1 AWG
200A 175A 150A 250A 200A 175A 150A 250A 200A 175A 150A 250A
0 AWG
200A 175A 300A 250A 200A 175A 300A 250A 200A 175A 300A 250A
150A 130A 100A 80A 200A 175A 150A 130A 250A 200A 175A 150A 300A 250A 200A 175A
2|0 AWG
300A 225A 200A
3|0 AWG
250A 225A
250A 225A 400A 350A 250A 225A 400A 350A 250A 225A
4|0 AWG
300A 250A
300A 250A 400A 400A 300A 250A 400A 400A 300A 250A
300A 225A 200A 350A 300A 225A
350A 300A 225A 200A
Full scale fuse comparison:
AGA®
GMA®
ATO®/ATC®
AGC®/MDL®
MAXI
ATM®
AMI®/MIDI®
MEGA®/AMG®
MRBF® Terminal
Class-T
ANL®
49
Blue Sea Systems
STEP 3 Choose the Fuse Holder Using the same colored headings as in the FUSE SELECTION CHART (step 2), follow the columns down to find fuse holders or fuse blocks that meet your specific requirements. Consider environmental factors: • Ignition protection is required where flammable vapors may accumulate.
Electrical / Electronics
A B
Example: Engine room and propane locker Consult American Boat and Yacht Council (ABYC) E-11.5.3 for Ignition Protection
Ignition protection • Ingress protection protects fuses from spray, washdown, and humidity. IP66-protected against powerful water jets Ingress protection
C
Decide between an in-line fuse holder or a fuse block: • In-line fuse holders are compact and hold a single low-amperage fuse. • Fuse blocks mount to a solid surface and may hold a single fuse or multiple fuses.
FUSE HOLDER SELECTION CHART Crimpable In-Line Fuse Holder
5060
Waterproof In-Line Fuse Holders
ATO® or ATC® In-Line Fuse Holders
MAXI™ Fuse Block
AMI® or MIDI® Safety Fuse Block
5006
7720
5062
MEGA® or AMG® Fuse Block
CLASS T Fuse Block
ANL® Fuse Blocks
5502
5005
5064 064
5191
5001
065 5065
ST Blade Fuse Blocks 5061
Terminal MRBF Fuse Blocks
SafetyHub Fuse Blocks
5025 5035 5026 5028 5029
SafetyHub Fuse Blocks
MEGA® or AMG® Safety Fuse Block
2151 7721
5503
7725
Heavy Duty In-Line Fuse Holder
Although this process uses information from ABYC E-11 7725
to recommend wire size and circuit protection, it may not cover all of the unique characteristics that may exist on a boat. If you have specific questions about your installation please consult an ABYC certified installer.
7748
5063
ST Glass Fuse Blocks
7748 7727 5015 5018
7727
LEGEND Ingress protection Ignition protection
© Copyright 2012 Blue Sea systems Inc. All rights reserved. Unauthorized copying or reproduction is a violation of applicable laws.
20008 You Can Do it, Protect Your Boat with the Correct Size Wire, Fuse, and Fuse Holder · 20 guides per pack
20010 20" x 17" Deskmat
See page 128 for other You Can Do It Guides and marketing materials.
We can keep you here longer......very quietly.
Charge Your Batteries Silently While Anchored - Even on Cloudy Days!
♦ Methanol fuel cell battery charger ♦ Fully automatic & maintenance-free ♦ Programmable for different batteries sizes & chemistry ♦ Three models: 80, 140, and 210 amps per day ♦ 10 litre container of fuel equals 925 amps (About 30 days of typical use)
Remote Panel
www.efoy-comfort.com
51
EFOY
E N W
Can be used all year round With the EFOY COMFORT, you have a reliable electricity supply when you are on the road or at sea. Whether you are under a shady tree or in a lonely cove. Irrespective of the weather and all year round - even at sub-zero temperatures!
When the EFOY COMFORT is installed as recommended, you will not hear it at all. SFC’s newly developed insulation and the sound damping system ensure quiet operation. Enjoy the peace and silence!
The EFOY COMFORT charges the on-board battery automatically. The integrated charge controller permanently monitors the charge level of the 12V battery. If necessary, the EFOY COMFORT starts automatically and switches off again once the battery is charged. The EFOY COMFORT produces electricity using the fuel in the fuel cartridge, adding oxygen from the air. In addition to the electricity, it only produces waste heat and water vapour containing an insignificant amount of carbon dioxide.
Fully automatic and maintenance-free Your EFOY COMFORT supplies electricity as soon as all connections are properly made. All you have to do is to make sure that fuel is always supplied. You do not even need to clean or maintain the EFOY COMFORT. It does not get any more convenient than this!
Eco-friendly The EFOY COMFORT is economical in use and does not produce emissions that harm the environment. It is extremely eco-friendly!
EFOY Comfort Fuel Cell Battery Chargers EFY 151 000 210 EFY 151 000 211 EFY 151 000 212
Provides more power than a solar solution
80i kit 140i kit 210i kit
Over the period of one year, EFOY COMFORT provides 3 to 10 times as much electricity as a solar system with the same power rating. To produce the same amount of electricity as an EFOY COMFORT 80 (40 W) with solar power, depending on the country and time of year, you would need a solar system with an output of between 120 and 400 Wp.
Fuel Cartridges M10 Volume: 2.64 US gallons / 10 litres Weight: 18.5 lbs / 8.4 kg Nominal capacity: 11.1 kWh Dimensions: L: 9.1" x W: 7.6" x D: 12.5" ▪▪Lasts about 30 days of "average" boating EFY 150 905 099
Very simple to operate remote panel
Parts:
EFY 151 906 005 EFY 151 906 006 EFY 151 075 037 EFY 151 905 021 EFY 150 903 001 EFY 151 077 045 EFY 151 077 051 EFY 151 077 054 EFY 151 077 055 EFY 151 908 020 EFY 151 908 022
Senseline extension cable 8M/26’ Powerline extension cable 8M/26’ Mastervolt-Efoy cable Extra fuel cartridge holder Service fluid replacement bottle Remote panel bezel, flush mount, white Remote panel bezel, flush mount, black Remote panel bezel, surface mount, white Remote panel bezel, surface mount, black Mounting plate Efoy comfort Mounting belt Efoy comfort
Standard Accessory Set - Operating panel (white) with cable - Mounting plate with belt - Charge line for battery connection - Fuel cartridge holder with belt - Off heat duct Set EFOY COMFORT - Isolated exhaust hose - User manual - Service fluid
The high-quality and user-friendly operating panel gives you all the key information, clearly arranged, even the fuel cartridge’s fill level. It is simplicity at its best. Fuel Cells
COMFORT 80
COMFORT 140
COMFORT 210
Max. charging power per day
960 Wh/day 80 Ah/day
1728 Wh/day 144 Ah/day
2520 Wh/day 210 Ah/day
Max. nominal power1
40 W
72 W
105 W
Nominal voltage
12 V
12 V
12 V
Max. nominal charging current @ 12V
3.3 A
6.0 A
8.75 A
Recommended battery capacity @ 12V
40-160 Ah
60-250 Ah
80-350 Ah
16.5 lbs (7.5 kg)
18 lbs (8.2 kg)
Weight Nominal consumption / kWh Noise level @ 7m distance Operating temperature Dimensions
15.4 lbs (7 kg)
0.24 US gal (0.9 litre) 25 dB(A) -4°F to +104°F (-20 to + 40 °C) L: 17.44 x W: 7.95 x H: 11.34 in (44.3 x 20.2 x 28.8 cm)
Electrical / Electronics
Extremely quiet
How it works
52
Energy 1
NSB210FTB
N
G31M
Electrical / Electronics
W E
Advantages of BLUE PLUS
Blue+ batteries are specifically designed for applications where a full recharge is not always available. The new PSOC (partial state of charge) technology will provide the maximum amount of power without a complete recharge after each use. The latest Enhanced Chemistry allows for faster charging at lower voltages while providing backward compatibility with existing models. The Enhanced Chemical design also retards sulfation crystallisation with a focus on long life and consistent performance
Energy 1 Batteries ▪▪Advanced AGM construction-no water levels to fill or corrosion to clean ▪▪Long life, over 800 cycles at 50% discharge, over 500 cycles at 80% discharge ▪▪35% more compact ▪▪Low internal resistance - provides for very high discharge and recharge rates ▪▪Proprietary plate construction delivers maximum cranking amps ▪▪Fast recharge capability ▪▪Remote venting for enclosed cabinet applications ▪▪Flexible design-can be installed in any orientation except inverted ▪▪Flame retardant (UL 94 VO) PC-ABS plastic case and cover ▪▪3 step terminal seal design to ensure leak-free operation ▪▪Approved as nonhazardous cargo for ground, sea and air transportation ▪▪Remote venting for enclosed cabinet applications ▪▪Integral handles ensure ease of handling
ENERGY 1 Batteries, based on Northstar AGM Technology, is the obvious choice for Yachts! .............. No Maintanence .............. Up to 40% in space savings .............. Up to 25% in weight savings .............. Remote Venting
Type
Amp Hour Rate @20 (Ah)
CCA @ 0°F
MCA @ 32°F
Reserve Capacity @ 25 amps
Dimensions H x W x L(in)
Weight (lbs)
ENE G31M*
Standard
102.7
1150
1370
220
9.25” x 6.77” x 12.91”
76.2
ENE NSB210FTB
Blue Plus
181
1250
1600
390
12.6” x 4.92” x 22.5”
132
Part #
*Request Item
Charge voltage compensation for NSB batteries The low internal resistance of the NSB battery allows for very high charge acceptance. These batteries also do not require the charge current to be artificially limited, as long as constant voltage (CV) charging is used. This characteristic helps the battery reach a very high (>85%) state of charge (SOC) in less than one hour. Modern, three step battery chargers accomplish this during the absorption phase of the charging process and downshift to a lower float voltage when the charging current decreases to 2 to 3 % of the battery’s capacity.
► Note
A rudimentary shop type charger does not generally have these features and is not recommended for charging any AGM batteries.
What is the optimum charge voltage? In a perfect world the charge rate of AGM batteries would be the same in all conditions. However, ambient temperature and battery temperature both play a major part in determining the optimum charge rate. It is best to use charging equipment that has adjustable voltage set points or pre sets for different battery types. For systems using adjustable charge rates it is best to pick the average ambient temp from the charging table below and find the closest setting. Modern three step battery chargers usually have a temperature compensating probe that is generally placed on the negative post of the battery that is expected to be the warmest battery. Temp/°C
Minimum Float Voltage /VPC
Nominal Float Voltage /VPC
Maximum Float Voltage /VPC
Minimum Cyclic Voltage /VPC
Nominal Cyclic Voltage /VPC
Maximum Cyclic Voltage /VPC
0
2.35
2.37
2.39
2.52
2.55
2.58
5
2.33
2.35
2.37
2.50
2.53
2.56
10
2.31
2.33
2.35
2.49
2.51
2.54
15
2.29
2.31
2.33
2.47
2.49
2.51
20
2.27
2.29
2.31
2.45
2.47
2.49
25
2.25
2.27
2.29
2.43
2.45
2.47
30
2.23
2.25
2.27
2.41
2.43
2.45
35
2.21
2.23
2.25
2.39
2.41
2.43
40
2.19
2.21
2.23
2.37
2.39
2.41
42
2.18
2.20
2.22
2.36
2.38
2.41
45
2.17
2.19
2.21
2.35
2.37
2.39
50
2.17
2.17
2.19
2.33
2.35
2.37
53
FTZ Adhesive Lined Tubing Specifications (3:1 ratio)
FTZ Eco-Max Battery Terminals
Shrinks to
Wire Range (AWG)
1/8” (3.2mm)
1/32" (0.8 mm)
<18 (< 0.8 mm2)
3/16” (4.8mm)
1/16" (1.6 mm)
20 - 12 (0.5-3 mm2)
1/4” (6.4mm)
5/64" (2 mm)
16 - 10 (1-5 mm2)
3/8” (9.5mm)
1/8" (3.2 mm)
12 - 8 (3-8 mm2)
1/2” (12.7mm)
5/32" (4 mm)
8 - 4 (8-19 mm2)
Size
Polarity
Tool Die
3/4” (19mm)
1/4" (6.4 mm)
8 - 2/0 (13-62 mm2)
FTZ 18128
4
Universal
Gray J-H
1” (25.4mm)
5/16" (7.9 mm)
2 - 4/0 (32-103 mm2)
FTZ 18143
1-2
Negative
Pink H-H
FTZ 18144
1-2
Positive
Pink H-H
FTZ Crimp ‘N Seal Quick Disconnects
FTZ 18163
1/0
Negative
Black E-A
FTZ 18164
1/0
Positive
Black E-A
FTZ 18173
2/0
Negative
Orange A-C
▪▪Fully insulated, waterproof, single hump ▪▪Polyolefin heat shrink tubing 3:1 ▪▪50 per package
FTZ 18174
2/0
Positive
Orange A-C
FTZ 18183
3/0
Negative
Purple A-B
FTZ 18184
3/0
Positive
Purple A-B
FTZ 18193
4/0
Negative
Yellow A-A
FTZ 18194
4/0
Positive
Yellow A-A
Part #
FTZ Lead Plated Yellow Brass Battery Terminals FTZ 17128 FTZ 17129
Negative, 5/16” Positive, 3/8”
FTZ Cast Lead Battery Terminals ▪▪Converts standard battery post terminals to a marine stud connector ▪▪Allows for easy removal of connector from battery FTZ 17138 FTZ 17139
FTZ 30188P50 FTZ 30196P50 FTZ 30198P50 FTZ 30388P50 FTZ 30398P50 FTZ 30488P25 FTZ 30498P25
22-18 Male, .250” tab 22-18 Female, .187” tab 22-18 Female, .250” tab 16-14 Male, .250” tab 16-14 Female, .250” tab 12-10 Male, .250” tab 12-10 Female, .250” tab
FTZ Crimp ‘N Seal Quick Disconnects ▪▪Waterproof ▪▪Polyolefin heat shrink tubing 3:1 ▪▪50 per package FTZ 31183P50 FTZ 31184P50 FTZ 31193P50 FTZ 31194P50 FTZ 31383P50 FTZ 31393P50
22-18, Male, .250” tab 22-18, Male, .187” tab 22-18, Female, .250” tab 22-18, Female, .187” tab 16-14, Male, .250” tab 16-14, Female, .187” tab
Negative, 5/16” Positive, 3/8”
FTZ Dual Wall Heat Shrink Tubing w/Sealant ▪▪Flexible tubing for light duty applications ▪▪Provides environmental and flame retardant protection for electrical and electronic connections ▪▪Polyolefin construction
FTZ Crimp ‘N Seal Brazed Rings
FTZ 29004-48 FTZ 29004R48 FTZ 29005-48 FTZ 29005R48 FTZ 29006-48 FTZ 29006R48 FTZ 29006Y48 FTZ 29008-48 FTZ 29008R48 FTZ 29008Y48 FTZ 29009-48 FTZ 29009R48 FTZ 29009Y48 FTZ 29010-48 FTZ 29010R48 FTZ 29010Y48 FTZ 29011-48 FTZ 29011R48
FTZ 31113P50 FTZ 31114P50 FTZ 31115P50 FTZ 31116P50 FTZ 31117P50
22-18 ring, #8 stud, 50/pkg 22-18 ring, #10 stud, 50/pkg 22-18 ring, 1/4" stud, 50/pkg 22-18 ring, 5/16" stud, 50/pkg 22-18 ring, 3/8" stud, 50/pkg
FTZ 31313P50 FTZ 31314P50 FTZ 31314P500 FTZ 31315P50 FTZ 31316P50 FTZ 31317P50
16-14 ring, #8 stud, 50/pkg 16-14 ring, #10 stud, 50/pkg 16-14 ring, #10 stud, 500/pkg 16-14 ring, 1/4” stud, 50/pkg 16-14 ring, 5/16” stud, 50/pkg 16-14 ring, 3/8” stud, 50/pkg
FTZ 31413P25 FTZ 31414P25 FTZ 31415P25 FTZ 31416P25 FTZ 31417P25
12-10 ring, #8 stud, 25/pkg 12-10 ring, #10 stud, 25/pkg 12-10 ring, 1/4”stud, 25/pkg 12-10 ring, 5/16” stud, 25/pkg 12-10 ring, 3/8” stud, 25/pkg
1/8" x 4' Black 1/8" x 4' Red 3/16" x 4' Black 3/16" x 4' Red 1/4" x 4' Black 1/4" x 4' Red 1/4” x 4’ Yellow 3/8" x 4' Black 3/8" x 4' Red 3/8” x 4’ Yellow 1/2" x 4' Black 1/2" x 4' Red 1/2” x 4’ Yellow 3/4" x 4' Black 3/4" x 4' Red 3/4” x 4’ Yellow 1" x 4' Black 1" x 4' Red
▪▪Fully insulated-waterproof ▪▪Polyolefin heat shrink tubing 3:1
Electrical / Electronics
▪▪Patent pending bimetal design ▪▪Exceeds SAE conductivity standards ▪▪Pure tubular copper barrel permits easier crimping and provides a copper to copper connection with the cable ▪▪10 per package
Size
Electrical / Electronics
54
FTZ
FTZ Bullets/Recepticals
FTZ Insulated Butt Splices
▪▪Waterproof ▪▪Polyolefin heat shrink tubing 3:1 ▪▪50 per package
▪▪Standard solderless terminals ▪▪Nylon covers
FTZ 31169P50 FTZ 31368P50 FTZ 31369P50
22-18, Male .156” 16-14, Male .180” 16-14, Male .156”
FTZ 30179P50 FTZ 30378P50 FTZ 30379P50
22-18, Female .156” 16-14, Female .180” 16-14, Female .156”
FTZ 45133N-P100 FTZ 45333N-P100 FTZ 45433N-P50
22-18, 100/pkg 16-14, 100/pkg 12-10, 50/pkg
FTZ Bullets ▪▪Standard solderless terminals ▪▪Nylon covers
FTZ Butt Splices
FTZ 45168N-P100 FTZ 45368N-P100
22-18, .176”, 100/pkg 16-14, .176”, 100/pkg
▪▪Waterproof ▪▪Polyolefin heat shrink tubing 3:1
FTZ 45178N-P100 FTZ 45378N-P100
22-18, .180”, 100/pkg 16-14, .180”, 100/pkg
FTZ 31130P50 FTZ 31330P50 FTZ 31430P25 FTZ 31530
22-18, 50/pkg 16-14, 50/pkg 12-10 25/pkg 8, 10/pkg
FTZ Step Down Butt Splices ▪▪Waterproof ▪▪Polyolefin heat shrink tubing 3:1 FTZ 35330P50 FTZ 35430P25 FTZ 35530P25
22-18/16-14, 50/pkg 16-14/12-10, 25/pkg 12-10/8, 25/pkg
FTZ Fully Insulated Double Humps ▪▪Standard solderless terminals ▪▪Nylon covers ▪▪.250 tabs FTZ 45187N-P100 FTZ 45197N-P100
22-18, Male, 100/pkg 22-18, Female, 100/pkg
FTZ 45387N-P100 FTZ 45397N-P100
16-14, Male, 100/pkg 16-14, Female, 100/pkg
FTZ 45487N-P50 FTZ 45497N-P50
12-10, Male, 50/pkg 12-10, Female, 50/pkg
FTZ Quick Disconnects
FTZ Nylon Rings ▪▪Standard solderless terminals ▪▪Nylon covers
▪▪Standard solderless terminals ▪▪Nylon covers ▪▪.250 tabs
FTZ 45113N-P100 FTZ 45114N-P100
22-18 ring, #8 stud, 100/pkg 22-18 ring, #10 stud, 100/pkg
FTZ 45183N-P100 FTZ 45193N-P100
22-18, Male, 100/pkg 22-18, Female, 100/pkg
FTZ 45313N-P100 FTZ 45314N-P100 FTZ 45315N-P100 FTZ 45316N-P100
16-14 ring, #8 stud, 100/pkg 16-14 ring, #10 stud, 100/pkg 16-14 ring, 1/4” stud, 100/pkg 16-14 ring, 5/16” stud, 100/pkg
FTZ 45383N-P100 FTZ 45393N-P100
16-14, Male, 100/pkg 16-14, Female, 100/pkg 12-10, Male, 50/pkg 12-10, Female, 50/pkg
FTZ 45413N-P50 FTZ 45414N-P50 FTZ 45415N-P50 FTZ 45416N-P50 FTZ 45417N-P50
FTZ 45483N-P50 FTZ 45493N-P50
12-10 ring, #8 stud, 50/pkg 12-10 ring, #10 stud, 50/pkg 12-10 ring, 1/4” stud, 50/pkg 12-10 ring, 5/16” stud, 50/pkg 12-10 ring, 3/8” stud, 50/pkg
FTZ 45514N-P50 FTZ 45517N-P50
8 ring, #10 stud, 50/pkg 8 ring, 3/8”stud, 50/pkg
FTZ Butt Splices ▪▪Standard solderless terminals ▪▪Nylon or vinyl covers FTZ 45130N-P100 FTZ 45330N-P100 FTZ 45430N-P50 FTZ 45530-P50
22-18 Nylon, 100/pkg 16-14 Nylon, 100/pkg 12-10 Nylon, 50/pkg 8 Vinyl, 50/pkg
FTZ Wire Taps FTZ 45908-P25
18-14, Dark Blue, 25/pkg
FTZ FTZ Coolseal Butt Connectors
FTZ Spiral Wrap
A heat-less, solderless terminal, it utilizes revolutionary anaerobic sealant technology that installs in a fraction of the time of comparable heat seal connectors. Simply strip the wire and crimp, activating the sealant, to create an environmentally sealed connection. The sealant prevents the ingress of moisture and air, the nylon insulation provides maximum abrasion and puncture resistance. ▪▪Seals out moisture causing corrosion ▪▪Improved productivity ▪▪No heat tools required ▪▪Nylon insulation ▪▪99.9% Etp copper terminal
▪▪Natural nylon wrap ▪▪100’ lengths
22-18, 100/pkg 22-18, 50/pkg 22-18, 25/pkg 16-14, 100/pkg 16-14, 50/pkg 16-14, 25/pkg 12-10, 100/pkg 12-10, 25/pkg
FTZ Standard Nylon Cable Clamps ▪▪Sold in packs of 100 FTZ 60301 FTZ 60301BK FTZ 60302 FTZ 60302BK FTZ 60304 FTZ 60304BK FTZ 60306 FTZ 60306BK
Natural, 3/16" Black, 3/16" Natural, 1/4" Black, 1/4" Natural, 3/8" Black, 3/8" Natural, 1/2" Black, 1/2"
FTZ Heavy Duty Nylon Cable Clamps ▪▪Sold in packs of 100 FTZ 60402 FTZ 60402BK FTZ 60404 FTZ 60404BK FTZ 60406 FTZ 60406BK FTZ 60408 FTZ 60408BK FTZ 60410 FTZ 60410BK
Natural, 1/4" Black, 1/4" Natural, 3/8" Black, 3/8" Natural, 1/2" Black, 1/2" Natural, 3/4" Black, 3/4" Natural, 1" Black, 1"
FTZ Polyethlene Split Loom ▪▪Thick wall offers superior crush-resistance and a tight seam enclosure ▪▪Temperature rating: -15 degrees F to 195 degrees F (-26 C to 90 C) ▪▪Flexible cable routing and easy break-out ▪▪Rounded edges prevent cutting cable FTZ 80004-25 FTZ 80006-25
3/8" x 25' Black 1/2” x 25’ Black
1/4” OD. 3/8” OD. 1/2” OD.
FTZ Starter Lugs ▪▪Seamless copper pad ▪▪Tin plated ▪▪10 per package FTZ 91004 FTZ 91005 FTZ 91006 FTZ 91007 FTZ 91014 FTZ 91015 FTZ 91016 FTZ 91017 FTZ 91024 FTZ 91025 FTZ 91026 FTZ 91027 FTZ 91029 FTZ 91035 FTZ 91036 FTZ 91037 FTZ 91039 FTZ 91046 FTZ 91047 FTZ 91056 FTZ 91057 FTZ 91059 FTZ 91066 FTZ 91067 FTZ 91069 FTZ 91086 FTZ 91087 FTZ 91089
8 ga lug, #10 stud 8 ga lug, 1/4" stud 8 ga lug, 5/16" stud 8 ga lug, 3/8" stud 6 ga lug, #10 stud 6 ga lug, 1/4" stud 6 ga lug, 5/16" stud 6 ga lug, 3/8" stud 4 ga lug, #10 stud 4 ga lug, 1/4" stud 4 ga lug, 5/16" stud 4 ga lug, 3/8" stud 4 ga lug, 1/2" stud 2 ga lug, 1/4" stud 2 ga lug, 5/16" stud 2 ga lug, 3/8" stud 2 ga lug, 1/2" stud 1 ga lug, 5/16" stud 1 ga lug, 3/8" stud 1/0 lug, 5/16” stud 1/0 lug, 3/8" stud 1/0 lug, 1/2" stud 2/0 lug, 5/16" stud 2/0 lug, 3/8" stud 2/0 lug, 1/2" stud 4/0 lug, 5/16" stud 4/0 lug, 3/8" stud 4/0 lug, 1/2" stud
FTZ Adhesive Back Mounting Plates ▪▪100 per package FTZ 93513 FTZ 93511 FTZ 93510 FTZ 93512
.75” x .75”, #6, UV Black .75” x .75”, #6, Natural 1” x 1”, #8, Natural 1” x 1”, #8, UV Black
Electrical / Electronics
FTZ 33130P100 FTZ 33130P50 FTZ 33130P25 FTZ 33330P100 FTZ 33330P50 FTZ 33330P25 FTZ 33430P100 FTZ 33430P25
FTZ 81002-100 FTZ 81004-100 FTZ 81006-100
55
Electrical / Electronics
56
FTZ
FTZ Heavy Duty Starter Lugs
FTZ Wrap ‘N Seal Tape
▪▪Colour coded ▪▪Seamless copper pad ▪▪Tin plated ▪▪10 per package
▪▪Wrap ‘N Seal silicone tape self fuses and cures in 24 hours to form a permanent moisture tight seal ▪▪Has no adhesive lining leaving the application clean with no sticky residue ▪▪Centre ridge acts as a guide when wrapping for a uniform and straight application ▪▪Ideal for high temperature applications ▪▪1” x 20’
FTZ 91705 FTZ 91706 FTZ 91707 FTZ 91709 FTZ 91715 FTZ 91716 FTZ 91717 FTZ 91719 FTZ 91725 FTZ 91726 FTZ 91727 FTZ 91729 FTZ 91745 FTZ 91746 FTZ 91747 FTZ 91749 FTZ 91756 FTZ 91757 FTZ 91759 FTZ 91766 FTZ 91767 FTZ 91769 FTZ 91776 FTZ 91777 FTZ 91779 FTZ 91786 FTZ 91787 FTZ 91789
8 ga lug, 1/4” stud 8 ga lug, 5/16” stud 8 ga lug, 3/8” stud 8 ga lug, 1/2” stud 6 ga lug, 1/4” stud 6 ga lug, 5/16” stud 6 ga lug, 3/8” stud 6 ga lug, 1/2” stud 4 ga lug, 1/4” stud 4 ga lug, 5/16” stud 4 ga lug, 3/8” stud 4 ga lug, 1/2” stud 1-2 ga lug, 1/4” stud 1-2 ga lug, 5/16” stud 1-2 ga lug, 3/8” stud 1-2 ga lug, 1/2” stud 1/0 lug, 5/16” stud 1/0 lug, 3/8” stud 1/0 lug, 1/2” stud 2/0 lug, 5/16” stud 2/0 lug, 3/8” stud 2/0 lug, 1/2” stud 3/0 lug, 5/16” stud 3/0 lug, 3/8” stud 3/0 lug, 1/2” stud 4/0 lug, 5/16” stud 4/0 lug, 3/8” stud 4/0 lug, 1/2” stud
▪▪100 per package Standard Ties 4" 5.7" 8" 11.8" 14.6" 14.5" 4" 5.7" 8" 11.8" 14.6"
Natural Natural Natural Natural Natural Natural UV Black UV Black UV Black UV Black UV Black
18lb 40lb 50lb 50lb 50lb 120lb 18lb 40lb 50lb 50lb 50lb
Mounting Nylon Head Ties FTZ 93310 FTZ 93320 FTZ 93340 FTZ 93350 FTZ 93410 FTZ 93420 FTZ 93440 FTZ 93450
4.5" 5.9" 8" 12.6" 4.5" 5.9" 8" 12.6"
Natural Natural Natural Natural UV Black UV Black UV Black UV Black
FTZ Electrical Tape ▪▪1700 Temflex vinyl tape ▪▪3/4” x 60’ FTZ 99204 Black
FTZ Shrink Jet Heat Tool Provides up to a 1300°F flameless heat source that is safe to use in environments where vapours may be present or flames are prohibited. ▪▪Automatic piezo ignition system ▪▪Water & wind resistant ▪▪Refillable fuel cell ▪▪L: 1” x W: 3.2” x H: 4.5” ▪▪Operating time (one tank) approx. 20 min. FTZ 94700
FTZ Turbo Lite II Heat Tool
FTZ Nylon Cable Ties
FTZ 93110 FTZ 93120 FTZ 93130 FTZ 93150 FTZ 93160 FTZ 93170 FTZ 93210 FTZ 93220 FTZ 93230 FTZ 93250 FTZ 93260
FTZ 99200 White FTZ 99201 Red FTZ 99202 Black FTZ 99207 Yellow
18lb 40lb 50lb 50lb 18lb 40lb 50lb 50lb
This small but versatile heat tool provides a 2400°F pinpoint blue flame that can easily handle applications such as heat shrink terminals and heat shrink tubing. ▪▪Piezo waterproof /windproof ignition ▪▪Convenient twist flame adjustment ▪▪Refillable translucent fuel tank ▪▪L: 1.4” x W: 0.8” x H: 2.8” ▪▪Operating time (one fill) approx. 25 min. FTZ 94900
FTZ FTZ Multi Purpose Crimp Tool
FTZ Compact Cable Cutter
Multiple Crimp Dies
▪▪7.5” Overall length ▪▪Heat treated blades maintain sharpness longer ▪▪Narrow head design for working in tight spaces ▪▪Cuts up to 2/0 copper or aluminum cable
▪▪26-10 AWG insulated terminals ▪▪22-10 AWG non-insulated terminals ▪▪7-8mm ignition terminals ▪▪‘F’ type auto terminals
57
FTZ 94012
Precision Ground Wire Cutters
Precision Ground Wire Stripper
▪▪26-10 AWG stranded wire ▪▪18-8 AWG solid wire
Bolt Cutters
▪▪Cuts five common sizes 4-40, 6-32, 8-32, 10-24, 10-32. ▪▪Threaded slots firmly grips bolts and can be used to re-thread bolts ▪▪Dual wire looping slots ▪▪Made of heat treated steel ▪▪Cushion grip handles ▪▪Weight: 7 oz
FTZ 94145
FTZ Controlled Cycle Crimp Tool FTZ’s controlled cycle ratchet crimp tool is specifically designed and manufactured for Crimp ‘N Seal heat shrink terminals and splices. The 94130 is UL listed and CSA Certified with CNS terminals and splices to provide the correct crimp every time. ▪▪Heat shrink terminals 22-10 awg ▪▪Precision dies colour-coded to industry standards ▪▪Ratchet mechanism ensures a proper crimp each time by not releasing until cycle is complete ▪▪Compound action delivers maximum crimp force ▪▪Cushion grip handles FTZ 94130
FTZ ‘CORRECT’ Crimp HD Crimp Tool The professional heavy duty crimp tool is engineered to provide the most complete crimp on all major brands of connectors. ▪▪6 Ga – 250 MCM range ▪▪Diamond-shaped crimp completely compresses cable to form solid mass assuring low resistance connection ▪▪Compound action exerts five tons of force ▪▪Built-in dies: no detached dies to purchase or lose ▪▪Rotating dies quickly adjust setting to accommodate various terminals and lugs ▪▪Length 25” ▪▪Weight 5.9 lbs FTZ 94284
FTZ Cable Cutter ▪▪16” handles provides leverage and control ▪▪Heat treated blades maintain sharpness ▪▪Cuts up to 350mcm copper or aluminum cable FTZ 94014
FTZ Rotary Cable Stripper ▪▪8 Awg-4/0 wire range ▪▪Adjustable blade height adjust depth to match insulation thickness of cable ▪▪Replacement blades included extends life of tool FTZ 94040
Electrical / Electronics
▪▪Up front anvil type: ideal for work in confined spaces ▪▪Scissor type: conveniently located next to wire stripper for fast installation
14.1" Multi-Function WXGA Multi-Touch Display
9" Multi-Function WVGA Multi-Touch Display
Wireless NavNet Data Viewer
Wireless NavNet Remote Control
Using FREE SmartPhone App
Using FREE Tablet App
www.FurunoUSA.com View The Guided Video Tour Want to know more about the new NavNet TZtouch? Visit NavNet.com or scan this code with your SmartPhone.
Furuno Furuno NavNet3D Multi-Function Displays
G e t C o n n e c t e d Wi t h O u r Wi r e l e s s I n t e r f a c e Engineered to utilize the latest technology, NavNet TZtouch opens the door to cutting edge wireless LAN features, such as tablet and smartphone apps, real time weather data, software updates and more. Download these FREE apps to view and control NavNet TZtouch.
NavNet Remote App Take full control of your NavNet in a whole new way. The TZtouch Remote app allows you to operate your system remotely with a tablet over wireless LAN, when connected to the network.
Marine Weather Forecast The weather tool is completely free and easy to use, giving you unlimited access to weather forecasts worldwide 24 hours a day provided by NavCenter. Select geographic coverage, data type, period of time, and then choose how to receive the le. NavNet TZtouch provides up to 16 days of weather forecasting.
Furuno TZTouch Displays Today's NavNet has come a long way from the first multi function display. Take one look and you will see just how far. A generous 9" or 14.1" display with edge-to-edge glass makes for a clean and stylish installation. The LED backlighting pushes light through every pixel on the screen for remarkable brightness. Anti-reflective glass coating is visible under any lighting condition. Configure the displays with a wide variety of sensors to build a navigation suite that meets your individual requirements. Bonded LCD-Clear Readability
Our bonded LCDs offer a fog-free structural design that has been applied to both the TZT9 and TZT14. This ensures that the display will never be affected by water condensation, caused by an air gap between the LCD and the front cover plate. Polarized Friendly-Clearly Remarkable
NavNet TZtouch has an LCD screen that does not “black out” when wearing polarized sunglasses, providing clear visibility from virtually any angle ▪▪Multi Touch Control (pinch to zoom) ▪▪Wireless Hotspot Connectivity ▪▪Tablet & Smartphone Apps ▪▪TimeZero FUR TZT9* FUR TZT14*
9”, WVGA 800 x 480 14”, WXGA 1280 x 800
FUR TZTBB*
Black Box
Accessories:
*Request Items
Network Sensor connection from Radar Easiest user interface on the market Fully digitized environment with add-on components Chart scaling without limitation
▪▪Pre-loaded with NOAA raster chart library for entire U.S. coastline including Alaska and Hawaii ▪▪TimeZero technology facilitates instant chart redraw, allowing zooming in and out, chart panning, changing chart display modes and other chart handling functions seamlessly and with no lag time ▪▪Full Time 3D chart rendering. Choose a 2D top-down view of the navigation chart for a traditional chart plotting presentation, or choose to pan and zoom the chart to any angle at any range scale you choose ▪▪Pan the chart using the scroll pad, and then instantly return to own ship at the touch of a single dedicated key ▪▪Zoom seamlessly and continuously to whatever chart scale you desire - TimeZero architecture allows you to seamlessly zoom in or out to the exact magnification level you like without steps or limitations ▪▪No “3D mode” to change into and no waiting - NavNet 3D operates in a 3D environment full-time ▪▪Fuse satellite photography with raster or vector chart information. Land areas (zero depth) are completely opaque, so that these areas are displayed as high-resolution satellite photos on the chart. As the depth increases, the satellite photography becomes more transparent so that you will know where the shallows end and the deeper water starts, while allowing the raster or vector chart to be visible ▪▪More than 12,000 ship’s track points and over 2,000 waypoints ▪▪200 planned routes, with up to 100 waypoints/route ▪▪Preloaded tides & currents ▪▪Built-in ARPA processor can simultaneously acquire and track up to 30 targets (with appropriate sensor) ▪▪AIS tracking when connected to AIS receiver ▪▪True colour depth shading utilizing bathymetric data ▪▪Standard video input and outputs
▪▪8.4” VGA (640 x 480) colour display FUR MFD 8
▪▪12.1” SVGA (800 x 600) colour display
FUR MFD 12
Furuno NavNet3D Black Box Extended Mode feature of Navnet 3D Black Box allows you to connect two monitors and synch the video, or ‘split’ the two screens into eight different quarters to display the information you want to see most. ▪▪Includes 1 controller FUR MFD BB*
* Request Item ► Also See
Radomes pg 62
Electrical / Electronics
R emo t e l y V i ew A n d C o n t r o l T Z t o u c h Wi t h A p p s D e s i g n e d F o r Y o u r Sma r t phoneAndTablet
NavNet Viewer App Conveniently view information shared wirelessly by the NavNet TZtouch network on your Apple and Android mobile products. As one of the features, you can click through instrument pages to view key navigational information, such as Depth, Temp, Wind, COG, Fish Finder display and much more.
59
Electrical / Electronics
60
Furuno
Furuno C-Map Fish Finder/Chartplotters
Furuno Colour LCD Fish Finders
Display Size: Power Use:
Display Size: Frequency: Range: Power Use:
6”/7” 12 VDC or 24 VDC
▪▪The LCD and AR glass are bonded together to ensure no fogging issues ▪▪Clear visibility even when wearing polarized sunglasses ▪▪Internal GPS antenna for simple and easy installation ▪▪Standard C-Map 4D chart available on SD card ▪▪RotoKeyTM revolving menu and familiar point-and-click operation ▪▪Internal memory: Waypoint/Track 30,000 points, Route 1,000 routes ▪▪Equipped with FURUNO’s latest digital fish finder technology - Bottom Discrimination Function (Compatable transducer required, sold separatley) - ACCU-FISHTM - A unique fish size analyze ▪▪Post-processing Gain Control applied to all echoes displayed on the screen ▪▪White Line function - Discriminates fish lying near the bottom ▪▪AIS data input compatable (up to 3 tanks) *These units are NMEA2000 compatable only FUR GP1670F FUR GP1870F
6”, 800 cd/m2 LCD, 640 x 480 pixels (VGA) 7”, 900 cd/m2 LCD, 800 x 480 pixels (WVGA)
Accessories:
FUR GPA-017
External GPS antenna w/ 10m cable
Furuno Fish Finders Display Size: Display Type: Range: Frequency: Power Output: Power Use:
5” / 6" Mono LCD 1500’ 50 & 200 kHz 300 W 12 VDC
▪▪Waterproof, Silver Bright display ▪▪Targets presented in up to 4 gray tones ▪▪Picture resolution of 240(H) x 320(V) pixels ▪▪Seven depth scales, from 0-10 to 0-640 feet ▪▪Automatic or manual depth range and gain adjustment ▪▪A-Scope for rapid fish detection and species identification ▪▪White Line mode for enhanced bottom fish detection ▪▪Audible and visual, temp, speed, fish or bottom alarm ▪▪TLL output sends position, temp and depth to Furuno TLL capable plotters ▪▪Speed and Temperature input via optional sensor or NMEA data ▪▪Mini Navigator allows storage of up to 12 waypoints, with capability to navigate back to these points using the LS4100’s XTE/Range and bearing calculation and steering screens ▪▪Two NMEA0183 ports - one bidirectional and one “listen-only” ▪▪Transducer sold separately FUR LS4100* 5" FUR LS6100* 6"
*Request Items
5.7”/8.4” 50 & 200 kHz 2-1200m 12 VDC or 24 VDC
▪▪Equipped with Furuno’s latest technology: the Bottom Discrimination Function - Analyze bottom structure** - Provides an at-a-glance recognition of bottom form with four types of graphical displays (Rocks/Gravel/Sand/ Mud) when connected to required thru-hull or transom mount transducer* - **Compatable transducer required ▪▪ACCU-FISH - A unique fish size analyzer based on the latest digital technology ▪▪White Line feature - Discriminate fish lying near the bottom - The top edge of the sea floor is displayed in white to clearly show structures - This feature helps to discriminate weeds and bottom fish distinctly ▪▪Configurable Alarm function (depth, fish echoes, etc.) ▪▪Post-processing Gain Control applied to all echoes displayed on the screen ▪▪Share and display information on a chart plotter* - Furuno’s TLL (Target Lat/Lon) output allows you to interface the FCV-627 with your chart plotter so that you can mark fishing spots with various information (L/L, Depth, Water Temp, Fish size, Bottom). - * Required connection to chart plotter ▪▪Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5m depth range) ▪▪Bright 800 cd/m2 LCD gives excellent readability, even in bright sunlight - The LCD and the AR glass are bonded together to ensure no fogging issues - Clear visibility even when wearing polarized sunglasses ▪▪Transducer sold separately Swivel mounting bracket to adjust the angle of the display
FUR FCV-627* FUR FCV-587*
*Request Items
► Also See
5.7” LCD, 640 x 480 pixels (VGA) 8.4” LCD, 640 x 480 pixels (VGA)
Transducers
pg 65
Furuno Furuno 7” LCD Radar (Stand Alone)
Display Size: Display Type: Antenna Size: Antenna Type: Range: Power Output:
Display Size: Display Type: Antenna Size: Antenna Type: Range: Power Output:
6” Mono LCD 15” Radome 16 n.m. 2.2 kW
▪▪2.2kW 16NM, 15” radome included ▪▪Waterproof, Silver Bright LCD ▪▪Display resolution of 240(H) X 320(V) Dots ▪▪Targets displayed in up to 4 levels of gray tones ▪▪New Tri-speed 15” radome antenna, increases RPM at short ranges for better target accuracy ▪▪3 Transmitter pulse lengths and repetition rates ▪▪Linear receiver with 10 dB noise figure ▪▪Automatic receiver tuning ▪▪Automatic or manual sea-clutter (STC) adjustment ▪▪Automatic or manual receiver gain adjustment ▪▪Sector blanking ▪▪Rain clutter (FTC) control ▪▪Echo stretch and interference rejection modes ▪▪Watchman mode to control the radar system for vessel safety ▪▪Reverse video display (white targets and marks on a black background) ▪▪Full screen navigation data display in the standby mode ▪▪Omni pad control for rapid cursor and menu operation ▪▪Electronic bearing line and variable range marker ▪▪Target or echo trails with selectable time intervals ▪▪Waypoint lollipop on-screen to aid in vessel navigation ▪▪Adjustable duplex (in or out) radar guard zone alarm ▪▪TLL (Target Lat/Lon) output for use with plotter ▪▪Ability to connect BBWGPS GPS/WAAS receiver ▪▪Wind indication with appropriate sensor input ▪▪10 Meter signal cable assembly FUR 1623
7” Mono LCD 18” Radome 24 n.m. 2.2 kW
▪▪2.2kW 24NM, 18.1” radome included ▪▪High contrast Silver Bright LCD ▪▪Low power consumption in watchman mode - only 8 W ▪▪Dual bandwidth IF amplifier: broad band for high fidelity in short ranges, narrow band for enhanced detection in long ranges ▪▪Variable antenna speeds with range scales for optimum performance on all ranges ▪▪Cursor position can be read in L/L (GPS Navigator is required) ▪▪Waypoint Lollipop on-screen to aid in vessel navigation (GPS navigator is required) ▪▪Programmable navigation data repeater feature ▪▪Zoom in to a specific area ▪▪Reverse video feature for effective use at night ▪▪Guard Zone alarm (US Patent No.5032842) ▪▪10 meter signal cable assembly FUR 1715
Electrical / Electronics
Furuno 6” LCD Radar (Stand Alone)
61
62
Furuno
Radar that you can access directly from your iOS devices. You can bring the Radar display whenever you go, even put it on the iPhone in your pocket. Since the display is untethered, you are free to roam the vessel while maintaining full situational awareness of your surroundings. Plug in the Radar, set up the free app from App Store and you’re good to go. With familiar gestures it’s a breeze to use; you can even use two iOS devices simultaneously. ▪▪4kW Radar antenna, powerful yet compact in size ▪▪Extremely economical power consumption (24W) ▪▪Wireless LAN, first Radar in the world accessible from your iOS devices ▪▪Exceptionally simple setup and intuitive operation with user-friendly & free iOS app ▪▪Fast and easy installation process w/only a single power cable ▪▪Simple touch interface with familiar gestures ▪▪Vivid, multi-color Radar target presentation ▪▪User selectable range scale from 0.125 to 24 nm ▪▪Two iOS devices – simultaneous operation FUR DRS4W
W E
Electrical / Electronics
N
Furuno 1st Watch Wireless Radar
ANTENNA ▪▪Peak Output Power: 4 kW ▪▪Type: ø488 mm Radome (19 inch) RF TRANSCEIVER ▪▪Frequency: 9410 ± 30 MHz ▪▪Range Scales: 0.125 to 24 nm ▪▪Antenna Rotation Speed: 24 rpm ▪▪Wind Load: Relative wind 70 kn
Furuno Radomes For NavNet 3D & TZT
Furuno Open Array Antennas For NavNet 3D & TZT
▪▪Ultra High Definition (UHD) digital radar offers crystal clear, noise-free target presentation with automatic real-time digital signal processing ▪▪Real-time digital auto gain/sea/rain controls to deliver noise-free radar presentation ▪▪Radar antenna rotation speed (24/36/48 rpm) is automatically shifted to the appropriate pulse length ▪▪Simultaneous scanning technology, providing unsurpassed target detection. With each sweep of antenna, dual progressive scan transmissions are sent, received and processed to display two separate radar ranges on your NavNet 3D display simultaneously. Each radar presentation acts autonomously, allowing for manipulation of individual gain and clutter controls ▪▪Radome incorporates a NMEA 2000 port to which certain NMEA 2000 sensors can be directly connected. Power for these networked sensors is supplied directly from the radome itself, allowing for flexible installation of multiple NMEA 2000 sensors without the need to run cables all the way to the main processor unit ▪▪15 meter radar sensor cable assembly for NavNet 3D ▪▪*Requires power unit for operation w/TZT units only
▪▪Enhanced detection both in long and short range by digital radar sensor ▪▪Enhanced auto tuning, auto gain and anti-clutter controls ▪▪48 rpm antenna rotation speed for HSC and river applications ▪▪Adaptive antenna rotation speed according to pulse length ▪▪Accurate radar overlay on both 2D/3D chart presentation with aid from heading sensors ▪▪True echo trail shows afterglow of moving radar targets ▪▪True colour radar shows density of targets in 16 colour levels ▪▪Radar guard zone and watchman features alert you to potential danger ▪▪Dual VRM (variable range marker) and dual EBL (electric bearing line) ▪▪Automatic IP address assignment for true plug and play installation ▪▪15 meter radar sensor cable assembly for NavNet 3D ▪▪*Requires power unit for operation w/TZT units only
FUR DRS2D* FUR DRS4D*
Accessories:
FUR PSU017*
* Request Items
2.2kW 24NM, 18” dome 4kW 36NM, 24” dome Power supply unit
FUR DRS4A* FUR DRS6A*
4kW 48NM, 3.5’ open array
FUR PSU012*
Power supply unit
Accessories:
* Request Items
6kW 64NM, 4’ open array
Furuno Radar Accessories FUR 000-144-564* 15m cable assembly FUR 000-144-565* 20m cable assembly
* Request Item
Furuno Furuno GPS Receiver Display Size: Display Type: Power Use: Receiver Type:
63
Furuno GPS/WAAS Receiver 4.5” Mono LCD 12 VDC or 24 VDC WAAS or GPS
FUR GP32*
*Request Item
FUR BBWGPS
10m cable
Furuno GPS/WAAS Sensor NMEA2000 The GP-330B is a high performance GPS Receiver designed for any type of vessel. This compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters with the WAAS mode activated. The GP330B is capable of data output in NMEA2000 format, making it an ideal GPS sensor for use with NavNet 3D systems. The sensor comes with all of the hardware required for deck- or mast-mounting solutions. A 6-meter cable with NMEA2000 connector is supplied as standard FUR GP330B*
*Request Item
Furuno GPS/WAAS Navigator ▪▪4.3” “Sunlight Viewable” color LCD (Brightness: 700 cd) ▪▪Enhanced data legibility thanks to large characters and high resolution visual aid ▪▪Stores up to 10,000 marks/waypoints, 100 routes and 3,000 track points ▪▪7 display modes available, including 2 user-customized modes ▪▪Supports both NMEA0183 and NMEA 2000 compatible CAN bus interface ▪▪Contact closure capability available on the 10P connector ▪▪SBAS capable for better measurement FUR GP33*
*Request Item Screenshots of Various Display
Furuno Remote Digital Display ▪▪4.3” “Sunlight Viewable” color LCD (Brightness: 700 cd) ▪▪Enhanced data legibility thanks to large characters and high resolution display ▪▪Customizable display format from full-screen to a 6-way split screen presentation ▪▪Supports CAN bus, NMEA2000 and NMEA0183 interfaces ▪▪Two independent CAN bus input and output ports incorporated for daisy chain networking ▪▪Internal NMEA0183/CAN bus conversion capability available ▪▪Simultaneous alarm monitoring capabilities for Water Temp, Depth, Speed, Arrival, Anchor, XTE, Trip, Odometer, Timer and Countdown Timer, Roll & Pitch, Wind Speed, Wind Direction, and Battery FUR RD33*
*Request Item Screenshots of Available Presentaion Styles
Electrical / Electronics
▪▪12 channel, parallel tracking GPS receiver with WAAS technology, DGPS ready ▪▪Up to 900 knot tracking velocity ▪▪20 second warm start acquisition ▪▪1-3M Accuracy (95% of the time with WAAS on and SA off) ▪▪High contrast silver bright LCD screen ▪▪Waypoint and route data transfer via PC to another GP32 ▪▪5 display modes available ▪▪Man overboard key ▪▪Waypoint entry by Loran-C TD’s (highway mode) ▪▪Alarms for arrival, XTE, anchor watch and high/low speed points ▪▪Memory Capacity: 1000 points of vessel track, 999 points for waypoints and marks, and 50 routes comprised of up to 30 waypoints ▪▪Waypoint comments of up to 16 characters ▪▪Event marks entered using one of nine symbols ▪▪2 Data ports for both RS422 and RS232 ▪▪Feed nav data to radar, chart plotter, autopilot or sounder through NMEA0183 port ▪▪Upload/download waypoints and routes directly from NavNet display
GPS/WAAS receiver antenna makes any NavNet product capable of receiving WAAS and GPS information. ▪▪WAAS (Wide Area Augmentation System) receiver ▪▪12 channel, all-in-view parallel tracking GPS receiver ▪▪Up to 900 knot tracking velocity ▪▪90 Second cold start acquisition, 20 second warm state acquisition ▪▪3m accuracy or higher (95% of the time, SA off) ▪▪WAAS on/off selectable
64
Furuno
Electrical / Electronics
Furuno NavNet 3D & TZT Network Hub NavNet 3D is built on an Ethernet network, allowing you to add as few or as many components as you desire along with up to ten displays to create your perfect navigational suite. The HUB101 is the centre of your navigational network, connecting all of your displays and components together. Power on/off synchronization amongst all of the NavNet 3D display units can be achieved with the use of the dedicated Ethernet HUB101. FUR HUB101
Furuno NavNet 3D & TZT Network Sounder ▪▪Enhanced detection of fish targets by Furuno digital Filter (FDF) fish finder technology ▪▪Selectable display modes include high or low frequency, dual frequency, zoom, nav data, a-scope, marker zoom, bottom zoom or bottom-lock ▪▪Audio and visual alarms alert you whenever preset limits are met for water depth, water temperature and fish echoes ▪▪2 selectable automatic gain control modes: cruising and fishing modes to match your boating purposes ▪▪IP address is automatically assigned to deliver plug and play installation ▪▪Requires transducer FUR DFF1
600w/1kW Dual
Furuno Heading Sensor ▪▪Required for radar overlay on any Navnet system ▪▪Automatic correction for local magnetic variation with an appropriate GPS navigator or manual correction with an optional remote display RD-30 ▪▪High stability by a solid-state rate gyroscope ▪▪Two IEC/NMEA ports, one AD-10 port ▪▪High speed heading data output in IEC 61162-2 format FUR PG500R*
* Request Item
Furuno Satellite Marine Weather ▪▪Weather information is delivered via digital receiver through Sirius’ marine weather services ▪▪You have the ability to receive weather information and forecasting that you can overlay onto your C-Map MAX charts NOAA raster and vector charts (NavNet 3D) ▪▪Current weather reports, NOWrad nationwide high resolution weather radar imagery and high-resolution Sea surface temperature images 7", 10.4" and Black Box units, as well as all NavNet 3D models. Requires Sirius weather service subscription & antenna, sold separately. FUR BBWX1*
* Request Item
Furuno Heading Sensor NMEA 2000 ▪▪Angular velocity sensor and magnetic bearing sensor incorporated ▪▪Automatic determination of installation site suitability ▪▪L-shaped mounting base for mounting on bulkhead ▪▪Output of magnetic bearing data to FURUNO CAN bus device ▪▪Includes 6' NMEA2000 cable FUR PG700*
*Request Item
Furuno NMEA2000 Backbone Box The FI5002 is an NMEA2000 Junction Box for use with NavNet 3D, TZT and the FI50 series of intrument displays, as well as the FI5001 Wind Sensor. The FI5002 features 2 NMEA2000 backbone ports, as well as 6 NMEA2000 ports. Its power requirements are less than 2A on a 12VDC system. FUR FI-5002*
* Request Item
Furuno Black Box AIS Receiver ▪▪Enhances safe navigation by receiving critical navigation information from local AIS-equipped vessels ▪▪Vastly improves situational awareness in any weather conditions including dense fog, darkness, and congested waterways ▪▪Dual parallel channel, "full duplex" receiver design receives AIS contact messages up to 100% more often than dual channel "multiplexing" receivers ▪▪High sensitivity, synthesized receiver automatically switches between international and local AIS channels ▪▪Optional amplified VHF splitter allows the use of a single antenna for VHF radio and AIS receiver ▪▪Network output to NavNet 3D and PCs for added redundancy and installation flexibility ▪▪Serial output for integration with various radar and chart plotter systems ▪▪AIS viewer software included for on-board PC or land based installations ▪▪Bulkhead mounting and low power, flexible DC input voltage design for simplified installations FUR FA30*
* Request Item
Furuno Parts & Accessories FUR IFNMEA2K2* FUR PSU012* FUR 000-010-511* FUR 000-144-565* FUR 000-154-054 FUR 000-154-028 FUR 000-156-405* FUR 000-167-962*
* Request Items
IF converter, NMEA200 - NMEA0183 Power supply unit DRS4A/6A w/MFD8 30m cable for FI 5001 sensor 20m signal cable assembly 5m NMEA 6 pin cable 5m NMEA 7 pin cable Power cable assembly (NMEA0183) 1m NMEA2000 cable assembly 2 ended
Furuno Furuno NMEA2000 Smart Sensors
FUR DST-800PSF* Depth/speed/temp FUR DT-800PSF* Depth/temp sensor
* Request Items
Furuno Transducers Bronze Thru-Hull Multi-Sensor ▪▪200W; 235 kHz ▪▪Depth, speed and temperature ▪▪10 meter cable with 7-pin connector ▪▪Can be flush mounted with up to a 22 degree dead rise FUR 235DST-MSE*
Bronze Thru-Hull Multi-Sensor ▪▪600W; 50/200 kHz ▪▪40/10 degree beam angles ▪▪Depth, speed and temperature ▪▪30' cable with 10-pin connector ▪▪High-speed fairing block included ▪▪Bottom discrimination functionality FUR 525STID-MSD*
Plastic Thru-Hull Multi-Sensor ▪▪200W; 235 kHz ▪▪Depth, speed and temperature ▪▪10 meter cable with 7-pin connector FUR 235DST-PSE
Plastic Transom Mount Multi-Sensor ▪▪600W; 50/200 kHz ▪▪45/11 degree beam angles ▪▪Temperature and removable speed assembly ▪▪30' cable with 10-pin connector ▪▪Bottom discrimination functionality FUR 525STID-PWD*
* Request Item
Furuno Transducers Bronze Thru-Hull ▪▪600W; 50/200 kHz ▪▪46/10 degree beam angles ▪▪8 meter cable with 10-pin connector ▪▪Bottom discrimination functionality FUR 520-5MSD
Plastic Shoot-Through-Hull ▪▪600W; 50/200 kHz ▪▪45/15 degree beam angles ▪▪30' cable with 10-pin connector FUR 520-IHD*
* Request Item
Plastic Thru-Hull Low Profile ▪▪600W; 50/200 kHz ▪▪45/15 degree beam angles ▪▪30' cable with 10-pin connector ▪▪Bottom discrimination functionality FUR 520-PLD
Plastic Thru-Hull ▪▪600W; 50/200 kHz ▪▪46/10 degree beam angles ▪▪8 meter cable with 10-pin connector ▪▪Bottom discrimination functionality FUR 520-5PSD
Plastic Transom Mount ▪▪600W; 50/200 kHz ▪▪46/10 degree beam angles ▪▪8 meter cable with 10-pin connector ▪▪Bottom discrimination functionality FUR 525-5PWD
Furuno Transducer Accessories ▪▪Transducer extension cable, 10-Pin(M) to 10-Pin(F), 4m
FUR AIR-033-203*
▪▪Transducer Y cable’ 10-Pin (F) to 10-Pin (M) and 6-Pin (M) 2m
FUR AIR-033-270*
▪▪Transducer pigtail, 10-Pin(F), 2m
FUR AIR-033-333*
* Request Items
Electrical / Electronics
The DST-800PSF is a NMEA2000 device. The wide fore-aft, fan shaped beam is able to find bottom even when installed on high dead rise hulls or on sailboats. ▪▪235 kHz ▪▪Depth, speed and temperature (+/ - 1 degree ) ▪▪2-Meter cable with 5-Pin NMEA2K Connector ▪▪Airmar's patent pending speed signal processing for stable and high accuracy speed readings from 160 MPH near-flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull ▪▪Depth, speed, and temperature insert is easily removed for quick service or storage ▪▪Self-jacking cap makes it easier to remove insert
65
66
Furuno
Electrical / Electronics
Furuno NavPilot A revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile. Self-Learning and Adaptive Software From the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate. FishHunter Mode FishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB). FUR NAVPILOT700*
4.6" Display (160 x 160 dot)
The new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down. FUR NAVPILOT711C*
3.6" Colour display (320 x 240 dot)
Accessories:
FUR PUMPHRP11-12* FUR PUMPHRP17-12*
* Request Items
Hydraulic pump 1.1 CI/SEC 12V Hydraulic pump 1.7 CI/SEC 24V
Furuno 2nd Station Handheld The FAP5021 is a handheld control unit for the NavPilot series of autopilots. It features a 3.6" Silver Bright LCD with a variety of user-customizeable display. The FAP5021 allows for full control of your NavPilot system including one-touch STBY, AUTO, NAV and DODGE selection. FUR FAP5021*
* Request Item
160 x 80 dot
Furuno FI-150 Series Instruments ▪▪Bright backlit displays with wide viewing angles ▪▪Auto-backlighting feature minimizes power consumption ▪▪NMEA2000 interface offers "plug and play" networking ▪▪Easy installation with hole-saw flush-mount design ▪▪Ideal for mast or bulkhead mounting configurations ▪▪White face "F1 Style" gauges provide maximum contrast and visibility ▪▪New use organic light emitting diode (OLED) backlighting technology reduces power consumption Wind Angle Display FI-501 Apparent and true wind angle is displayed in both analog and digital format when connected to the FI-5001 or other NMEA2000 wind measurement system. FUR FI-501*
Wind Bearing Display FI-502 Provides detailed and precise wind bearing measurements from 60 port to 60 starboard, an important range for close hauled (CH) points of sail. FUR FI-502*
Digital Depth/Speed Display FI-503 Displays critical digital data for navigation, such as depth, speed, temp, and atmospheric weather data in a 3-way split screen. FUR FI-503*
Multi Function Display FI-504 Features a large digital display. The combination of alpha and numeric characters present all of the data and functionality available in the FI-50 Network. Alternating data displays are possible and selected information can be switched at 3 second intervals. FUR FI-504*
Furuno 2nd Station Display The FAP5011A is a single-din sized display designed for use in a NavPilot 500 or NavPilot 511 system where multiple stations are desired. Multi-station capability, maximum of six stations, is available through the utilization of a high speed network. The FAP5011A is supplied with all of the hardware required to connect to the NavPilot system. FUR FAP5011A*
* Request Item
3.6” Display
Analog Wind Transducer FI-5001 Capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The FI-5001 has a power requirements of less than 40 mA on a 12VDC system. ▪▪Note: The FI-5001 Sensor does not come with a cable FUR FI-5001*
*Request Items
Fusion
N
Sailing on the cutting edge of innovation and True-Marine™ product design, FUSION is a pioneer in the industry, creating built - for - purpose marine entertainment solutions that integrate your favourite media devices for superior on - water listening and unbeatable environmental protection. Introducing the flagship 750 Marine Entertainment Series, the pinnacle of FUSION ingenuity and craftsmanship, which is setting the standard for the entire marine industry. Available with an internal UNI-Dock MS-UD750 or marine DVD/CD player MS-AV750 and supporting the latest Apple iOS, MTP Windows/Android and USB media devices. Featuring Bluetooth AVRCP/A2DP audio streaming capabilities, support for Pandora and advanced FUSION -Link NMEA 2000/Ethernet/Wi- Fi/Bluetooth connectivity, the FUSION 750 Marine Entertainment System is the next generation in the FUSION dynasty.
MULTI-ZONE TECHNOLOGY- 4 ZONES FUSION-Link WIRED CONTROL- VIA NMEA 2000 & ETHERNET FUSION-Link WIRELESS CONTROL- VIA WI-FI & BLUETOOTH A2DP BLUETOOTH AUDIO STREAMING WITH AVRCP PANDORA RADIO INTERNAL UNI-DOCK MS-UD750 ONLY HDMI CONNECTOR WITH ARC AUDIO RETURN CHANNEL MS-AV750 ONLY 360° 1P x5 WATER RESISTANT BUILT-IN CLASS-D AMPLIFIER WITH SIDE FIN COOLING- 280 WATTS INTUITIVE APPLE & MTP AUDIO CONTROL OPTICALLY BONDED COLOR LCD
Fusion 750 Series UNI-DOCK Stereo AM/FM/Bluetooth/USBx2/AUXx2/iPod/iPhone/MTP/SiriusXM Ready (Requires optional Sirius XM connect tuner) Designed to offer water resistant protection of any compatible smartphone or media player from the harsh marine environment. Engineered to securely house the world’s most popular smart devices, while keeping them charged and ready. Included are 3 connector cables (Apple 30-Pin, Apple Lightning™ and Micro USB) for unrivaled connectivity and unmatched playback possibilities. ▪▪3 Year Warranty FUE MS-UD750
Fusion 750 Series DVD Player AM/FM/CD/DVD/ACR/Bluetooth/USB/AUXx2/iPod/iPhone/MTP/ SiriusXM Ready (Requires optional Sirius XM connect tuner) Fully intigrated DVD playback solution. The MS-AV750 intoduces a standard definition HDMI connection for quick plug and play copatability with any supported TV or monitor. Includes ARC functionallity, allowing a single HDMI cable to stream audio to the Fusion stereo, eliminating the need for any additional cabling. ▪▪3 Year Warranty FUE MS-AV750
Electrical / Electronics
W
E
FUSION 750 SERIES MARINE ENTERTAINMENT SYSTEM
67
68
Fusion
N
Electrical / Electronics
W
E
FUSION 650 SERIES MARINE ENTERTAINMENT SYSTEM
In the ever-evolving electronics industry, FUSION positions itself firmly at the forefront. At FUSION we approach audio engineering from the perspective of the boat enthusiast, incorporating the smartest marine technologies and environmental protection to produce an unrivaled fusion of form and function. Introducing the exciting new FUSION 650 Entertainment Series, available in two models: MS-UD650 Internal UNI -Dock and MS -AV650 DVD/CD System. Offering superior playback of your favorite USB, Apple iDS and MTP Android/Windows media devices, the 650 features FUSION-Link NMEA 2000 control, Bluetooth A2DP audio streaming capabilities and Pandora radio support, for a true symphony of audio technologies.
MULTI-ZONE TECHNOLOGY- 3 ZONES FUSION-Link WIRED CONTROL - VIA NMEA 2000 FUSION-Link WIRELESS CONTROL - BLUETOOTH A2DP BLUETOOTH AUDIO STREAMING WITH AVRCP PANDORA RADIO INTERNAL UNI-DOCK MS -UD650 ONLY COMPONENT AND COMPOSITE VIDEO CONNECTIONS MS-AV650 ONLY 360° IP xS WATER RESISTANT BUILT-IN CLASS-D AMPLIFIER WITH SIDE FIN COOLING- 280 WATTS INTUITIVE APPLE & MTP AUDIO CONTROL OPTICALLY BONDED LCD
Fusion 650 Series UNI-DOCK Stereo
Fusion 650 Series DVD Player
AM/FM/B lu etooth/USBx2/ AUXx2/i Pod/ iPhone/MTP/Sirius-XM Ready (Requires optional SiriusXM connect vehicle tuner) Designed to offer water resistant protection of any compatible smartphone or media device from the harsh marine environment . Engineered to securely house the world’s most popular smart devices, while keeping them charged and ready. Included are 3 connector cables (Apple 30-Pin, Apple Lightning and Micro USB) for unrivaled connectivity. The MS-UD650 will house products which are equal to or less than the following dimensions 137mm x 71mm x 13mm (5.39 x 2.80 x 0.51 inches). ▪▪3 Year Warranty
AM/FM/CD/DVD/ Bluetooth/USB/ AUXx2/ iPod/iPhone/MTP/ Sirius-XM Ready (Requires optional SiriusXM connect vehicle tuner) Relax after a day of boating fun with FUSION‘s fully integrated DVD playback solution. The MS-AV650 introduces both composite and component video connections for complete convenience. All DVD functions are accessible from either the front panel controls, included IR remote or Bluetooth remote app. ▪▪3 Year Warranty
FUE MS-UD650
FUE MS-UV650
69
Fusion
N W
E
FUSION BLACK BOX MARINE ENTERTAINMENT SYSTEM Fusion Black Box Marine Entertainment System
FUE MS-BB300R
Complete system
When space is premium at the helm, a compact entertainment solution is needed to blend performance and subtlety; Introducing the full featured Black Box Entertainment System MS-BB300R from FUSION Entertainment. Featuring FUSION- Link Wired NMEA 2000 control, A2DP Bluetooth audio streaming with AVRCP, advanced Multi -Zone technology in three zones and support for the latest Apple and MTP Android/Windows devices. The MS-BB300R is a true ‘plug and play’ compact entertainment powerhouse. Complete with a MS-NRX200i Wired Remote control, 3.5mm Auxiliary and USB panel mount connector, the MS-BB300R is a complete system for any serious boater. MS-BB300: AM/FM/Bluetooth/USB/AUXx2/iPod/iPhone/MTP/Sirius-XM Ready (Requires optional SiriusXM vehicle connect tuner)
FUSION-Link WIRED CONTROL- VIA NMEA 2000 MULTI-ZONE TECHNOLOGY- 3 ZONES BLUETOOTH STREAMING WITH AVRCP APPLE iOS & MTP ANDROID/ WINDOWS MEDIA PLAYBACK
FUSION Link FUSION - Link Certified Multi - Function Displays provide on-screen control of the audio entertainment onboard your vessel when utilizing an existing Ethernet or NMEA 2000 network. The following marine electronics manufacturers support FUSION - Link: Raymarine, Furuno, Lowrance, Garmin, Simrad , Humminbird, B&G and Murphy, providing quick access to your iPod/iPhone music library via song, artist, album, genre and playlist. Navigate stereo sources including AM, FM, VHF, USB, MTP, CD, DVD, Bluetooth and adjust the volume in each individual audio zone from the touch screen interface of any supported MFD for convenient and smart control.
FUSION - Link is available on the NavNet TZtouch Series
Available on the following models: HDS G2 and HDS G2 Touch
Available on the following models: ASeries , CSeries, ESeries and GS Series
Available on the following models: NSO Evo 2 and NSS Evo 2
Available on the following models: GPSmap 6000, 7000, 527, 741 and 8000 series
Available on the following models: ION and ON IX Series
LEARN MORE AT FUSION-LINK.COM
Available on the following models: Zeus, Zeus Touch and Zeus 2
Available on on select Regal and Mastercraft vessels
(refer to the manufacturer for compatible vessels!)
Electrical / Electronics
SYSTEM INCLUDES MS-BB300 Black box MS-NRX200i Wired remote ACCESSORIES Panel mount USB & 3.5mm auxillary cables
70
Fusion
FUSION 205 SERIES MARINE STEREO
Electrical / Electronics
MULTI-ZONE TECHNOLOGY- 2 ZONES FUSION-Link WIRED CONTROL - VIA NMEA 2000 AMAZINGLY SIMPLE CONTROLS BLUETOOTH AUDIO STREAMING- MS-BT200 & MS-BT100 Ready* VHF RECEIVER APPLE lOS & MTP ANDROID/ WINDOWS MEDIA PLAYBACK * Requires MS-BT200/MS-BT100 Bluelooth module! Software upgrade may be required. Sold separately.
Fusion Marine 205 Stereo ▪▪AM/FM/VHF/AUX/USB/iPod/iPhone/MTP/SiriusXM-Ready (Requires optional SiriusXM Vehicle Connect Tuner) ▪▪Can be expanded with the optional MS-UNIDOCK to house, charge and playback USB/iPod/iPhone and MTP audio devices (sold separately) ▪▪3 Year Warranty FUE MS-RA205
Parts:
FUE MS-RA200MP* DIN mounting plate FUE MS-HUGMS Gimbal mounting kit MS-RA50,200,205
* Request Item
▪▪200 Watts Max (50W x 4) ▪▪NMEA 2000 Certified ▪▪FUSION-Link (NMEA 2000 Only) ▪▪Large 2.6” daylight viewable LCD ▪▪1Px5 water resistant on the front (when bulkhead mounted) ▪▪Multi-Zone Control-2 amplified audio zones. Name each zone for added convenience ▪▪Multi-language user interface-English, French, Italian, German, Spanish and Dutch ▪▪Line out & subwoofer out ▪▪Bluetooth streaming requires optional MS-BT200 or MS- BT100 (sold separately) ▪▪W: 6-3/16” x H: 2-11/16”
FUSION 50 SERIES MARINE STEREO AMAZINGLY SIMPLE CONTROLS ADVANCED iPod USER INTERFACE COMPACT DESIGN 360° IPxS WATER RESISTANT BLUETOOTH READY- MS-BT100 MODULE REQUIRED (SOLD SEPARATELY)
Fusion 50 Stereo FUSION ‘s most compact and cost effective marine stereo ever. The MS-RA50 has a shallow flush mount depth of only 55mm (2-1/8”). perfect for small boats and personal watercraft. Featuring iPod and iPhone music play back and FUSION’s innovative, easy to use user interface. ▪▪3 Year Warranty FUE MS-RA50
▪▪80 Watts Max (40W x 2) ▪▪Very compact marine stereo, W: 130 x H: 50 x D: 55mm ▪▪2 Channel system: capable of powering a pair of speakers ▪▪Large 2.6” daylight viewable LCD screen ▪▪Left & right line out - For connection of an external amplifier ▪▪360° I Px5 water resistant ▪▪Multi - language user interface ▪▪MS-RA50: AM/FM/AUX/iPod/iPhone ▪▪ MS-BT100 (sold separately) will enable bluetooth audio streaming
Parts:
FUE MS-IPDOCK-G2 FUE MS-IP15L2 FUE MS-RA200MP*
* Request Item
iPod external dock Accessory cable DIN mounting plate
► Also See
Bluetooth Modules pg 73
Fusion
71
FUSION REMOTE / MEDIA DOCKING SOLUTIONS Fusion Wired Remote
FUE MS-NRX200i FUNCTIONS AS A NMEA 2000® REPEATER ▪▪Compatible with MS-AV750, MS-UD750, MS-IP700, MS- IP700i, MS-AV700, MS-AV700i, MS-AV650, MS-UD650, MS-88300 & MSRA205 ▪▪NMEA 2000 Certified ▪▪1Px5 Water Resistant ▪▪FUSION-Link NMEA 2000 Ready ▪▪Large 2.6” Monochrome FSTN LCD screen ▪▪Screen is high contrast, viewable in direct sunlight ▪▪Key and LCD adjustable backlighting ▪▪Compact size for ease of installation ▪▪Mounting hardware included
Fusion Universal Media Device Dock Designed to offer water resistant protection of any compatible smartphone or media device from the harsh marine environment. Engineered to securely house the world’s most popular smart devices, while keeping them charged and ready. The MS-UD650 will house products which are equal to or less than the following dimensions 137 x 71 x 13mm (5.39” x 2.80” x 0.51”). ▪▪Compatible with MS-UD750, MS-AV750, MS -UD650, MSAV650, MS-AV700, MS-AV700i, MS-IP700i, MS-BB300 and MS-RA205 ▪▪2 Mtr (6 .5 It) installation cable included ▪▪Easy charge connections ▪▪150mm cables included, Apple 30 Pin, Lightning and Micro-USB ▪▪IPx5 Water Resistant on the front of the dock ▪▪3 Year Warranty FUE MS-UNIDK
W
E
N
FUSION SIGNATURE SERIES SPEAKERS GERMAN CURV CONE TECHNOLOGY SILK DOME TWEETER FULLY SEALED CROSSOVER COMPONENTS DUAL-COLOR DIFFUSED LED LIGHTING* IP65 WATER RESISTANT DESIGN * LED Lightning not available with the Classic White Speakers
6.5” 230 WATT FUE SG -F65W White, Classic FUE SG-FL65SPW White with LEDs FUE SG- FL65SPG Grey with LEDs
7.7” 280 WATT FUE SG-F77W White, Classic FUE SG-FL77SPW White with LEDs FUE SG- FL77SPG Grey with LEDs
Available in a 6.5” or 7.7” speaker format, with DualColor diffused LED lighting options that illuminate Striking Blue or Sparkling White (illumination excludes classic) to set the mood.
CURV is a woven fibre composite. which is heat pressed, to form a lighter and stronger cone that delivers greater sound definition and higher output, with resistance to the marine environment.
Combining ‘CURV’ Cone composite technology with a Silk Dome Tweeter and fully sealed Crossover components has resulted in a speaker that delivers premium sound definition, higher output and excellent integrated acoustic performance.
Electrical / Electronics
▪▪Control the entertainment experience directly from any individual audio zone of your vessel with the addition of a MS-NRX200i ▪▪Most stereo functions and control of the volume, balance and subwoofer level are available ▪▪Simply Plug & Play. Rated True-Marine ▪▪Cutout: 2” diameter ▪▪Faceplate: 4-3/8” x 2-11/16” ▪▪3 Year Warranty
Electrical / Electronics
72
Fusion
Fusion Full Range 2-Way Speakers
Fusion Subwoofer
▪▪Complies with IP65 water resistant standards ▪▪Fully sealed cross-over, magnet and tweeter ▪▪German ‘CURV’ cone material ▪▪Titanium dome tweeter ▪▪Complies with ASTM standards for UV stability (ASTM-D4329) and salt/fog resistance (ASTM-B117)
Designed to produce unparalleled bass in the marine environment. Added to our audio system, marine subwoofers increase the bass level of your music or improve the overall sound quality. To operate your subwoofer correctly you must also install a 2 or 4 channel amplifier. ▪▪Mounting depth: 4-1/2”
▪▪Come with Ice White speaker covers FUE MS-FR4021
4”, 120 watts max
▪▪Includes Ice White & Midnight Black speaker covers FUE MS-FR6021 FUE MS-FR7021
6”, 200 watts max 7”, 260 watts max
Fusion Shallow Mount Speakers Designed with flush profile tweeters and a compact basket depth for simple shallow mount installation. ▪▪Water resistant construction ▪▪Woofer Type: 6" polypropylene cone ▪▪Tweeter Type: PEI cone ▪▪Box Type: Sealed ▪▪Peak Power: 150 watts ▪▪Efficiency: 85dB ▪▪Frequency Response: 60Hz - 22kHz ▪▪Impedance: 4 Ohm ▪▪Mounting depth: 1-5/8" FUE MS-EL602
Fusion 2-Way Box Speakers ▪▪Outdoor box speakers are carefully designed and manufactured specifically for marine/outdoor use ▪▪Adjustable mounting bracket with all mounting hardware supplied ▪▪Tweeter: PEI cone ▪▪Max. power: 100 watts ▪▪Frequency response: 80Hz-20kHz ▪▪Impedance: 7 ohms ▪▪H: 7-7/8” x W: 5-3/8” x D:5-7/16” FUE MS-OS420
Fusion In-Salon Cube Speakers The MS-BX3020 is a compact wide-range speaker enclosure, with a sophisticated internal crossover network for crystal-clear sound. The two-way speaker drivers comprise a high quality 3-inch dampedcone bass to mid-range speaker, paired with a high quality silk dome tweeter, in an optimised acoustic chamber. Both internal speakers are conformal coated. ▪▪Waterproof paper cone ▪▪Fabric Dome Tweeter ▪▪Peak Power: 100 watts ▪▪Frequency response: 200–20kHz ▪▪Sensitivity (1W/1M): 85db ▪▪Impedance: 4 ohms ▪▪L: 6-15/32” x W: 3-17/32” x D: 4-13/32” FUE MS-BX3020
FUE MS-SW10
10”, 400W
Fusion In-Salon Subwoofer Introducing FUSION’s Signature series purpose built “Internal Use” Active Subwoofer with a unique active bass reflex system which combines advanced subwoofer technology and a passive radiator to tune a small volume and driver for better low frequency performance. Featuring a 4 channel Class-D amplifier with 2 channel speaker output. Designed for dry area installation. ▪▪6” down firing subwoofer + 6” passive radiator ▪▪Rated Amplifier Power 43 Watts RMS per channel @ 2 Ohms or 26 Watts RMS per channel @ 4 Ohms ▪▪Built-In Class-D amplifier ▪▪2 Channel speaker output ▪▪Two channels are tuned to provide power to the MS-BX3020 cabin speakers (sold separately) ▪▪Wiring kit included ▪▪19-11/16" x 9-27/32" x 6-27/64" FUE MS-AB206
Fusion Amplifiers Add more power to your marine speakers by connecting a FUSION Marine Amplifier to your audio system, or install with a subwoofer to increase the bass level of your music. Amplifiers feature anti-corrosion treated PCB's and stainless steel end panels to maximize corrosion protection. A 2 channel amplifier is used to power a subwoofer, increasing the level of your audio system ▪▪Dimensions (W) x (H) x (D) 220mm x 260mm x 57.5mm ▪▪65 Watts RMS per channel @ 4 Ohms ▪▪100 Watts RMS per channel @ 2 Ohms ▪▪200 Watts RMS Bridged channel @ 4 Ohms FUE FM-402
A 4 channel amplifier can be used to power two pairs of speakers and a subwoofer. ▪▪Dimensions (W) x (H) x (D) 220mm x 330mm x 57.5mm ▪▪65 Watts RMS per channel @ 4 Ohms ▪▪95 Watts RMS per channel @ 2 Ohms ▪▪200 Watts RMS Bridged channel x 2 @ 4 Ohms ▪▪1 Year Warranty FUE FM-504
Fusion / Jensen
73
Fusion Hi to Low Level Converter
The stainless steel MS-DA51600 will resist corrosion and the incredible 1600 watt output (peak) will power 4 speakers and 1 subwoofer with ease.
Connect from the speaker outputs of a audio system to the line level inputs of an amplifier. Voltage is stepped down to reduce the high output level of the audio to match the more sensitive line input of the amplifier ▪▪Input impedance: 50Ω ▪▪Frequency range: 20Hz - 30 Hz ▪▪Output impedance: 10kΩ ▪▪Dimensions: W: 50 x H: 28 x D: 25mm
FUSION's first 5 Channel Class-D Hi-Fi Marine amplifier; the key benefit of a Class-D amplifier is low battery drain with a high output, making this the perfect amplifier for the marine environment. The MS-DA51600 has conformal coated PCB's for maximum product life and performance plus the amplifier chassis acts as a heat sink; reducing component core temperature and increasing efficiency. ▪▪L: 11-3/16” x W: 8-1/4” x H: 2” ▪▪1 Year Warranty FUE MS-DA51600*
* Request Item
Fusion Zone Amplifier At 70 watts x 2, th is compact marine amplifier is brilliant for adding Multi-Zone audio throughout your vessel. Class-D amplifier technology ensures the product has low current draw and an efficient output, engineered for 2 Ohm stereo stable operation and able to power 4 speakers (2 in parallel per channel). ▪▪Max Power Rating (Watts): D-Class 70 Watts ▪▪Operating Range 10 -16 volts DC ▪▪Ratings per Channel 20 Watts RMS @ 4 ohms per channel: 33 Watts RMS @ 2 ohms per channel ▪▪2 Channel / 2 Ohm Stable ▪▪Water resistant design / Conformal coated PCB ▪▪Small and discrete size: 128 x 78 x 51mm ▪▪3 Year Warranty
FUE HL-02
Fusion iPod Accessory Cable Connects your iPod to your marine stereo, enabling full control and navigation of your iPod through the stereo interface. Compatible with the following iPod models: ▪▪iPod nano ▪▪iPod classic ▪▪iPod touch ▪▪iPhone Connects to MS-CD60, MS-CD500, MS-CD600 and MS-AV600 FUE MS-IP15L2
1.5 meters
Connects to MS-RA50 FUE MS-IP15L3
1.5 meters
FUE MS-CLADAP Clarion adaptor plate FUE MS-HUGMS Gimble mount kit MS-RA50, 200, 205
Jensen
FUE MS-AM702*
* Request Item
Fusion Bluetooth Adapter - BT100 ▪▪Enables Bluetooth audio streaming from a compatible Bluetooth enabled device ▪▪The MS-BT100 supports direct paired unit control ▪▪Play, Stop and skip tracks and with an effective range of 33' ▪▪Compatible with MS-IP600, MS-AV600, MS-CD600, MSRA200, MS-RA50, MS-AV700, MS-IP700 and MS-RA205 ▪▪1 Year Warranty FUE MS-BT100
Fusion Bluetooth Adapter - BT200 Enables Bluetooth audio streaming from a compatible Bluetooth enabled devices. The MS-BT200 supports both direct stereo and paired unit control. Play, Stop and skip tracks with song info displayed on screen. ▪▪Effective range of 33' ▪▪Compatible with MS-AV700, MS-IP700, and MS-RA205* * Software upgrade may be required, visit www.fusionelectronics. com for details. If Sirius connector is currently in use purchase the MS-BT100
▪▪1 Year Warranty
FUE MS-BT200
Jensen Sirius/XM Receiver Kit GEN 3.0 Connect, control and enjoy Satellite Radio, including new SiriusXM Xtra Channels, through your compatible SiriusXM-Ready car stereo. The SXV300 tuner plugs directly into compatible car stereos from top manufacturers, without the need for special adapters or translators. The compact size installs easily and discreetly behind the dash for a fully integrated look. ▪▪Dimensions: W: 3.42" x H: 2" x D: 0.7" ▪▪Weight: 3 oz ▪▪Subscription required (XM compatable only) JEN SXV300V1M
► Also See
Sirius Antennas pg 97
Electrical / Electronics
Fusion 5-Channel Amplifier
74
Hatteland Display N
Electrical / Electronics
W E
▪▪Multitouch ▪▪Type approved ▪▪IP22 rear / IP66 front ▪▪Superior bonding technology ▪▪Module based, tailor-made systems made easy! ▪▪Sunlight readable ▪▪Glass display control™ (GDC), solid state menu system ▪▪Designed to work with Furuno TZT14 and BB systems Series X Displays Panels offer the ultimate in performance, convenience, state of the art design and enduring quality for system integrators and boat builders. The Series X display range is a flexible monitor solution designed and type approved for the professional maritime segment, where reliability and long life time are key pre-requisites for the industry. The product range combines stunning design and technology with innovative features and options, making it all that the integrator needs for top class type-approved marine systems. The multi-input MMD models provide a wide choice of display size and format for a multitude of shipboard applications, where combining data and video inputs to a single unit provides maximum flexibility. Be it for ship navigation, automation or security, this range with all it's possible options provides a robust and multipurpose platform from which to display and manage data and multiple camera or sensor videos. Series X displays feature Glass Display Control™, LED Backlight, TFT Active-matrix Technology, full dimming and multipower as standard, and can also accomodate and combine a number of options such as touch screen, optical bonding, sunlight readability (High Bright) and ECDIS calibration Screen
Aspect Ratio
Size
Weight
HAT HD 17T21-MMD-MA1-FOGP*
Part #
17" 1280 x 1024 SXGA
4:3
W: 15.35'' x H: 13.82'' x D: 2.89''
6.2kg / 13.6lbs
HAT HD 19T21-MMD-MA1-FOGP*
19" 1280 x 1024 SXGA
4:3
W: 16.89'' x H: 15.04'' x D: 2.93'
9.7kg / 21.3lbs
HAT HD 24T21-MMD-MA1-FOGP*
24" 1920 x 1080 FHD
16:9
W: 23.35'' x H: 15.12'' x D: 2.76''
13.9kg / 30.6lbs
* Request Items Supported Video Signals: Interlaced HDTV, NTSC, PAL and SECAM video, Composite Video Multi-power 115/230VAC - 50/60Hz + 24VDC Product Features: Dimmable 0-100%, Multi-power AC & DC, PBP (Picture By Picture), PIP (Picture In Picture)
► Also See
Furuno TZT14 & TZTBB pg 59
Connectors • DVI IN: 2 x DVI-D 24P (female) • RGB IN: 2 x HD D-SUB 15P (female) • Composite Video IN: 3 x BNC (female) • SCOM RS-422/485: 1 x 5-pin Term. Block 3.81, non-isolated+Buzzer • RGB OUT: 1 x HD D-SUB 15P (female) • If Touchscreen: 1 x USB Type A (female) • Ethernet: 1 x RJ45 (female) for Remote Control • SCOM RS-232: 1 x D-SUB 9P (female) non-isolated • Potmeter: 1 x D-SUB 9P (male), - (Potentiometer IN, +5VDC OUT, BRT +/- IN) • AC Power IN: 1 x Std. IEC inlet • DC Power IN: 1 x 2-pin Terminal Block 5.08
Hatteland Standard Display Screens All of the same features as above but without the multitouch features. Part #
Screen
Aspect Ratio
Weight
HAT HD 17T21-MMD-MA1-FOGA*
17" 1280 x 1024 SXGA
5:4
6.2kg / 13.6lbs
HAT HD 19T21-MMD-MA1-FOGA*
19" 1280 x 1024 SXGA
5:4
9.7kg / 21.3lbs
* Request Items
Safe and Reliable
Inverter/chargers are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and/or UL 1741 and CSA for off-grid installations.
Modified Sine Wave or Pure Sine Wave
Magnum Energy is a leading manufacturer of premium inverter/ chargers for Marine applications. With over 150 years of combined inverter design and manufacturing experience, Magnum Energy has incorporated new design and manufacturing techniques to build some of the industry’s most reliable, advanced, and cost effective inverter/chargers and accessories. Designed, built, and assembled in the USA. Look for our state-of-theart battery charger design, using power factor correction techniques, an innovative first in both our sine wave and modified sine wave platforms.
Most Magnum inverters provide pure sine wave power. Run your TVs, stereos, plasma screens, and other sensitive electronics without worry. The cost effective pure sine wave inverter chargers provide clean, reliable power with low total harmonic distortion (THD) of less than 5%. For an even more cost effective choice, Magnum also provides modified sine wave inverters. These units will provide power that will efficiently run 90% of the electronics on the market.
Power Factor Corrected (PFC) Charger
PFC charger is built into all of the inverter/chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers.
Choices
Magnum inverters come in multiple power models and 12, 24, and 48 volt configurations, allowing you to choose the model that is right for you.
Lightweight
20% lighter than comparable models, Magnum inverters use an aluminum base and cover that provide noise reduction and corrosion resistance. These lighter weight models are also designed to be overnight shippable if necessary.
Accessible Design
Extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make inverters more accessible when needed.
Dual Inputs
With 60 Amp transfer service available on most models, our inverters allow you to take advantage of the more balanced power of a 120/240 volt generator.
Buy with Ease
All inverter/chargers are backed by a three-year (36-month) or two-year (24-month) limited warranty.
Accessories to Customize Systems
Available accessories include remote controls, AGS modules, a battery monitor kit, DC fuses, and series stacking cable kits. Their accessories line utilizes a more consistent design from one product to another. Easy-to-use remote for your home, boat, truck, or RV is compatible with all Magnum inverter/charger models.
Field Repairable
You probably won’t have any problems with a Magnum product, but if you do, the units are field repairable, saving you time and money if your unit ever needs service.
Your Source for Mobile and Renewable Energy
76
Magnum
Electrical / Electronics
Magnum MM & MMS Series Inverter/Chargers
Magnum ME Series Inverter/Chargers The power corrected charger efficiently charges your batteries even at low AC voltage, while the modified sine wave inverter keeps the cost down. Additionally, the battery temperature sensor works with the charger for optimum battery charging. Power Factor Corrected (PFC) Charger: It uses less energy from a generator than a standard charger – using only 15 amps per 100 amps versus 23 amps used by standard chargers. ▪▪ETL Listed to the requirements of UL/cUL 458 ▪▪Designed with Flash programming for memory upgrades ▪▪Mount on a shelf, bulkhead, or even upside down ▪▪Aluminum base and cover ▪▪Multiple ports, including an RS485 communication port for network expansion, and a remote port ▪▪Comes with an on/off inverter-mounted switch with an easy-toread LED indicator ▪▪Expanded transfer relay: 50 amp transfer service ▪▪Extra large AC access cover with terminal screw block and 360° DC connection terminals with covers ▪▪All boards can be replaced in the field ▪▪Five stage charging including bulk, absorb, float, equalize, and battery saver ▪▪Inverter Battery Input: 9 - 17 VDC ▪▪13.75" H x 12.65" W x 8" D ▪▪Three year warranty
MM & MMS inverters provide a cost effective solution for those with smaller power needs in mobile applications. Versatile, easyto-use, and lightweight, the MM & MMS series provides a reliable base for your energy system. Units use a PFC (Power Factor Corrected) charger, which is 85% efficient and the same charger topology used in all Magnum models. ETL listed to the stringent requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets the KKK-A-822E standard. AC power to continue to pass-thru to power loads even if the inverter is off. ▪▪Dead battery charging allows charging of batteries that are extremely low ▪▪Automatic, 4-stage battery charger with power factor correction ▪▪Inverter/charger has a 12 amp AC transfer relay ▪▪The AC input and output are provided with pigtail wires to allow hard wiring to a main AC distribution panel or inverter sub-panel ▪▪Neutral-to-ground switching ▪▪Includes 15’ battery temperature sensor ▪▪Dimensions L: 16.6” x W: 8.4” x H: 4.7” ▪▪Two year warranty Relay capability ............20 AAC (input current for charging and pass through) Battery temperature compensation ............Yes, 15 ft Battery Temp Sensor standard Remote available (optional) ............Yes, MM-RC or ME-RC Internal cooling ............0 to 59 cfm variable speed Overcurrent protection ............Yes, with two overlapping circuits Overtemperature protection ............Yes, on transformer and MOSFETS On/Off with status indicator ............Yes, front mounted and easily accessible Low battery cutout ............10 VDC, adjustable with the ME-RC remote
MM Modified Sine Wave Transfer relay capability ......... 2 legs at 30 A for 120 V/30 A or 240 V/60 A service Five stage charging capability ......... Bulk, Absorb, Float, Equalize and Battery Saver™ Battery temperature compensation ......... With optional Temp Sensor Internal cooling ......... 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcurrent protection ......... Yes, with two overlapping circuits Overtemperature protection ......... Yes on transformer, MOSFETS, and battery
Inverter Output
Weight
MAG ME 2012
100 amp
2000 VA
38 lbs
MAG ME 2512
120 amp
2500 VA
42 lbs
MAG ME 3112
160 amp
3100 VA
45 lbs
Accessories:
MAG ME RC-50 Remote
▪▪Input battery voltage: 9-15.5 VDC ▪▪Rated input battery current 160 ADC
Charger
▪▪Continuous output at 25° C 70 ADC Part #
Charger Output
Inverter Output
Weight
MAG MM1212
70 ADC
1200 VA
20 lbs
Accessories:
Charger Output
Part #
Inverter
MAG ME RC-50
6 LED remote
MMS Pure Sine Wave Inverter
▪▪Input battery voltage: 9-17 VDC ▪▪Rated input battery current 133 ADC
Charger
▪▪Continuous output at 25° C 50 ADC Part #
MAG MMS 1012
Accessories:
Charger Output
Inverter Output
Weight
50 amp
1000 VA
23 lbs
MAG ME RC-50 Remote
Magnum
77
Magnum MSH Hybrid Series Pure Sine Inverter/Chargers
The power factor corrected charger efficiently charges your batteries even at low AC voltage. The Pure Sine Wave inverter will power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. ▪▪ETL Listed to the requirements of UL/cUL 458 ▪▪Designed with Flash programming for memory upgrades ▪▪Mount on a shelf, bulkhead, or even upside down ▪▪Aluminum base and cover ▪▪Multiple ports, including an RS485 communication port for network expansion, and a remote port ▪▪Comes with an on/off inverter-mounted switch with an easy-toread LED indicator ▪▪Extra large AC access cover with terminal screw block and 360° DC connection terminals with covers ▪▪All boards can be replaced in the field ▪▪13.75" H x 12.65" W x 8" D ▪▪Three year warranty
Why is the MSH-M Series a "Hybrid"? Most inverters only use one source of energy to power the inverter loads - either from the incoming AC power (i.e., shorepower or generator) or from the batteries. The MSH-M Series combines the energy from both the AC input and the batteries to power the inverter loads. This feature gives the inverter the ability to recharge the battery when there is surplus power, or to deliver more power to the loads if they require more than the AC input can supply by itself. ▪▪120 VAC / 60 Hz output ▪▪60 amp AC input and pass-thru capability ▪▪Load Support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators ▪▪Works with any Magnum accessory, including the AGS, remotes, and the Magnum router ▪▪13.75" H x 12.65" W x 8" D ▪▪Weight: 55 lbs ▪▪Three year warranty
Inverter Battery Input
Inverter Output
Weight
MAG MS 2012
100 amp
9 - 17 VDC
2000 VA
42 lbs
MAG MS 2812
125 amp
9 - 17 VDC
2800 VA
55 lbs
MAG MS 4024
105 amp
18 - 34 VDC
4000 VA
55 lbs
Part #
Magnum ME 300F & ME 400F Fuse Kits The Magnum Energy fuse block is designed to provide code compliant overcurrent protection. It uses a fast acting, current limiting class-T fuse cartridge which provides instantaneous protection in the event of a short circuit but also employs a time delay to allow momentary current surges common in inverter applications. Rugged injection molded polycarbonate base and thermoformed ABS cover. ▪▪Dimensions: 2” x 7” MAG ME 300F MAG ME 400F
300 amp 400 amp
Magnum Battery Temperature Sensor MAG ME-BTS-15 15’
Transfer relay capability ........60 AAC Five stage charging capability .......Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ Battery temperature compensation .......Yes, 15 ft Battery Temp Sensor standard Remote available (optional) .......Yes, ME-ARC-50 or ME-RC (with latest revision) Internal cooling .......0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcurrent protection ........Yes, with two overlapping circuits Overtemperature protection .......Yes on transformer, MOSFETS, and battery
Part #
Charger Output
Inverter Battery Input
Inverter Output
MAG MSH 3012M
125 amps
9 - 17 VDC
3000 VA
MAG MSH 4024M
125 amps
18 - 34 VDC
4000 VA
Electrical / Electronics
Charger Output
W E
Transfer relay capability ..........2 legs at 30 A for 120 V/30 A or 240 V/60 A service Five stage charging capability .........Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ Battery temperature compensation .........Yes, 15 ft Battery Temp Sensor standard Remote available (optional) .........Yes, MM-RC or ME-RC Internal cooling .........0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcurrent protection ..........Yes, with two overlapping circuits Overtemperature protection .........Yes on transformer, MOSFETS, and battery
N
Magnum MS Series Pure Sine Wave Inverter/Chargers
78
Magnum
Electrical / Electronics
Magnum Remote The MM-RC25 remote control is designed to be simple to install and use. It allows easy on/off control and provides a quick indication of the inverter and charger operation. This remote is for the MM and MMS Series that include the battery charger; such as the MM612AE, MM1212, MM1212AE and MMS1012 models. This remote can also be used with the ME, MS, MS-AE, MS-E, RD and RD-E Series inverter/chargers; provided they do not require any inverter or charger programming changes. ▪▪Cut out: 1-1/2” x 2” ▪▪Panel: 2” x 3” Works with MM, MM-E, ▪▪25’ cable included MM-AE, MMS, MMS-E Series MAG MM RC25
Simple to use, yet allows full set-up of all the standard and advanced features available in Magnum inverters. The MEARC also has the option of controlling the advanced features of the ME-AGS-N Automatic Gen Start and the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming. 50' cable. ▪▪Face plate: W: 5-7/8" x 3-7/8" Works with ME, MM612 Inverter, MM, MMS, MMS-E, MM-AE, MS, ▪▪Cutout: W: 4-7/8" x H: 2-7/8" MAG ME ARC-50
MSH-M, MSH-RE, MS-AEJ, MS-E, MS-PAE, MS-PE, RD, RD-E Series
Magnum Remote
Magnum Remote Simple to use, yet allows full set-up features of the ME, MM, MS and RD Series inverters. The ME-RC also has the option of controlling the ME-AGS Automatic Gen Start using a network connection to the inverter. ▪▪Non-volatile memory saves your settings even if the power is disconnected ▪▪The large LCD screen and at-a-glance LEDs display the inverter/charger status ▪▪Soft keys give access to menus and a rotary encoder knob quickly scrolls through menus and selects settings ▪▪Multiple functions in one place, including: inverter on/off, charger on/off, shore power breaker settings, AGS control, meter button, setup, and technical menus ▪▪*Optional ME BMK kit for full battery monitoring ▪▪Cut out: 2-7/8” x 4-7/8” Works with ME, MM612 ▪▪Panel: 3-3/4” x 5-3/4” Inverter, MM, MM-E, MMMAG ME RC-50
Magnum Advanced Remote Control
Panel w/50' cable
AE, MMS, MMS-E, MS, MSH-M, MSH-RE, MS-AEJ, MS-E Series, MS-PAE, MSPE, RD, RD-E Series
The ME-RTR is a combination of the ME-ARC advanced feature remote and a communication hub for MS-PE parallel units all in one easy-to-install and operate unit. The ME-RTR features full inverter/ charger setup and control, four-line LCD display, four parallel stacking ports for the MS-PE Series inverter/ charger, communication ports for ME-AGS-N or ME-BMK accessories, and a two wire voltage controlled auxiliary relay. ▪▪Works with MS-PAE, MS, ME and RD-Series ▪▪Panel: 6-/58” x 8-15/16” ▪▪6’ cable included MAG ME-RTR
Magnum Battery Monitor Module Gives you a “fuel gauge” type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts. The MEBMK includes the sense module, sense and communication cables, and a 500 amp shunt. * The ME-BMK-NS requires a Magnum inverter with a "Network" port and a ME-RC (revision 2.0 or higher) or ME-ARC remote control. MAG ME BMK
Magnum
79
Magnum Automatic Generator Start Module
MAG ME AGS-N
Magnum Smart Battery Combiner ▪▪An easy to use stand alone battery combiner and isolator ▪▪Apply a single charging source to the main battery and the ME-SBC charges a second battery using a portion of the charge ▪▪Adjustable voltage ranges, automatic on-off points ▪▪Transfers up to 25 amps ▪▪Bi-directional charging ▪▪Panel: 4.2” x 5.4” MAG ME-SBC
Electrical / Electronics
The Magnum AGS is compatible with most major generators and is designed to automatically start your generator* based on low battery condition or the inside temperature of the boat. Adjust the AGS to meet your needs: With the AGS, you can set the battery start voltage from 10-12 VDC or 20-22 VDC, the start temperature from 65° - 85°F, the run time from .5 to 6 hours, and the quiet time with an easy-to-set clock. Manual start and stop: Auto Gen Start settings do not interfere with the manual start/stop operation of the generator. Just use any existing start/stop switch in your coach. ▪▪Selectable cabin temperature for genstart 65-85 °F ▪▪Selectable battery voltage for genstart 10-12 VDC or 20-22 VDC ▪▪Selectable generator run time .5 - 6 hours ▪▪Selectable quiet time 5 choices: 9 pm - 7 am, 9 pm - 8 am, 9 pm - 9 am, 10 pm - 8 am, 11 pm - 8 am ▪▪Clock Adjustable 24-hour clock The network version AGS allows operation of the AGS via the ME Series remote panel with Magnum ME & MS series charger/inverters. ▪▪Panel: 5-3/8” x 3-5/8”
Simpler, safer, and more secure boating using Maretron’s vessel monitoring and control system. There are hundreds of things to keep track of on your vessel to assure a safe and secure journey. With the Maretron system, you can relax knowing that the system is keeping you and your crew safe by watching for smoke, carbon monoxide, high bilge water, over heating engines, low batteries, or any other critical system onboard your vessel 24 hours a day. And with Maretron Cloud Services, you can check on your vessel from anywhere in the world. Visit us at www.maretron.com to learn more.
www.maretron.com
Maretron
N W E
Vessel Monitoring And Control Touchscreens
81
▪▪8" TFT LCD panel, LED Backlit ▪▪Widescreen aspect ratio 5:3 ▪▪800 x 480 pixels ▪▪600 nits brightness (Optically bonded) MRE TSM800C-01* 8"
▪▪13.3" TFT LCD Panel, CCFL Backlit ▪▪Widescreen aspect ratio 16:10 ▪▪1280 x 800 pixels ▪▪400 nits brightness (Optically Bonded)
Maretron N2KVIEW Monitoring Software N2KView is a comprehensive vessel monitoring and control software that goes beyond simple monitoring. With N2KView® you get additional functionality including alerts, video, control, and fuel management. The alerts functionality allows you to setup as many warnings and alarms as you need so you can be forewarned of potential problems. With alerts, you can relax knowing that the system is watching for smoke, CO, high bilge water, or anything else you deem important. N2KView video capability allows you to add cameras as part of the monitoring system - for example a camera in the engine room - or the cameras can be used as part of the security system. The control functionality gives you the ability to manage your electrical system; for example, you can turn lights or pumps on or off directly from N2KView and even tell if the lights or pumps are burned out and not working. Lastly, the fuel management function uses information from the fuel flow monitor, tank monitors, and GPS to provide advanced information like distance and time to empty as well as fuel rate and fuel economy.
MRE TSM1330C-01* 13.3"
* Request Item
Maretron USB Gateway A gateway for bridging USB equipment using NMEA 0183 sentences - such as an on-board computer running navigational software - with an NMEA 2000 network. The gateway automatically converts incoming NMEA 2000 messages to NMEA 0183 sentences so you can continue benefiting from navigational and charting software that you already own while enjoying the many benefits of networked NMEA 2000 instruments. MRE USB100-01
Maretron Internet Protocol Gateway
If you want to run N2KView software on your vessel’s computer, you will need either a Maretron USB100 or an IPG100, which are necessary to get sensor information from the NMEA 2000 network to the computer.
The Internet Protocol Gateway (IPG100) lets you connect Maretron black boxes (MBB100’s), Maretron touch screens (DSM800’s), PC’s, Mac’s, tablets, or smartphones to an NMEA 2000 network so you can monitor and control your vessel using Maretron’s N2KView software. The conventional way of viewing NMEA 2000 information is with a display on the vessel that is directly connected to an NMEA 2000 network, but with the IPG100, you are not limited to direct connected displays. With the IPG100, you can use any device running N2KView software to monitor and control your vessel from onboard or ashore. ▪▪Works together with N2KVIEW software
There is also a mobile version of N2KView which runs on iPhone or iPad, or an Android device
Maretron Black Box
Hardware
N2KView software can run on your vessel's computer or on standalone products like one of Maretron's TSM800C, TSM1330C displays or the Maretron Black Box (MBB200C) vessel monitoring computer.
W
E
N
About N2KView
N2KView is completely user-configurable and you are free to design different screens to your exact needs while easily switching from screen to screen for monitoring all your systems. Digital displays, analog gauges, graphic displays, warning lights, bar graphs, all can be configured exactly how you want them to be. You can even set the operating limits and color bands for analog gauges so you know when things are within limits and when they are not. MRE N2KVIEW
MRE IPG100-01
Monitoring software
A dedicated processing unit that includes Maretron’s N2KView vessel monitoring and control software. Unlike a PC that allows any software to be loaded, the MBB200C runs only N2KView software making it extremely stable and dedicated to monitoring and controlling your vessel. The MBB200C connects to a monitor through a VGA connector and associated touch screen through a USB or serial port connection. MRE MBB200C-01* MRE MBB200CBL-1.0*
*Request Items
Black Box Cable for black box
Electrical / Electronics
Dedicated touchscreens that include Maretron’s N2KView vessel monitoring and control software. The N2KView software allows you to configure as many favorite screens as you want with exactly the information you want to see. These touchscreens provide an extremely simple touch interface for monitoring and controlling critical systems from anywhere on the vessel. ▪▪Solid state disk drives ▪▪Fanless cooling system ▪▪Flush mounting hardware included ▪▪2 isolated NMEA 2000 Connectors
82
Maretron
Electrical / Electronics
Maretron NMEA 2000 GPS Antenna/Receiver 32 channel GPS antenna and receiver capable of providing five position fixes per second, accurate boat speed four times per second, and precision time once per second. An additional benefit of the GPS200 is that it broadcasts precision magnetic variation information using the current position and world magnetic model. The GPS200 automatically decodes GPS correction signals from Satellite Based Augmentation Systems including WAAS, EGNOS, or MSAS to provide better than 2.5m accuracy. ▪▪Course over ground ▪▪Latitude ▪▪Speed over ground ▪▪Longitude ▪▪Magnetic variation ▪▪Time ▪▪Satellite status ▪▪Date MRE GPS200-01
Maretron Solid State Compass Solid state, rate gyro electronic compass that provides better than 1° heading accuracy through ±45° of roll and pitch angle, and better than 1° roll and pitch accuracy in static conditions. It delivers precise, reliable heading information ten times per second, plus vessel attitude including pitch and roll readings once per second. ▪▪Compatible with the NMEA 0183 digital interface standard MRE SSC200-01
Maretron Wind & Weather Station Maretron’s outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no moving parts to wear out or to get caught in the rigging. When used with the Maretron DSM200 display and SSC200 compass, the user will be able to view both apparent and true wind speed and direction as well as dew point and wind chill factor. ▪▪3.45” H x 4.25” dia. ▪▪Apparent wind speed ▪▪Apparent wind direction ▪▪Atmospheric pressure ▪▪Air temperature ▪▪Relative humidity MRE WSO100-01
Maretron Transducer
The J2K100 converts the following information: ▪▪AC generator current ▪▪AC generator frequency ▪▪AC generator voltage ▪▪Tachometer ▪▪Engine hours ▪▪Coolant pressure ▪▪Coolant water temperature ▪▪Engine oil pressure ▪▪Engine oil temperature ▪▪Boost pressure ▪▪Fuel rate monitoring ▪▪Charging voltage ▪▪Percent engine load ▪▪Percent engine torque ▪▪Rated engine speed ▪▪Vin ▪▪Software id ▪▪Transmission gear ▪▪Transmission oil pressure ▪▪Transmission oil temperature
Gateway The J2K100 is compatible with any engine, transmission, or genset equipped with a J1939 interface, including products from the following manufacturers: ▪▪Caterpillar ▪▪Cummins ▪▪Detroit Diesel ▪▪John Deere ▪▪Kohler ▪▪Northern Lights ▪▪Onan ▪▪Perkins ▪▪Steyr ▪▪Volvo Penta ▪▪Yanmar
Maretron Alarm Module Maretron’s Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module can be triggered by alarms generated by Maretron’s N2KView Vessel Monitoring System, or by Maretron’s DSM250. ▪▪NMEA 2000 network interface ▪▪Super loud 105db audible alarm ▪▪Bright red led visual alarm ▪▪Green led status indicator ▪▪Multiple selectable alarm patterns ▪▪Waterproof - can be mounted indoors or outdoors MRE ALM100-01
Maretron Smoke/Heat Detector
W
.6 to 100m depth
MRE J2K100-01
E
MRE DST110-01
Maretron’s J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 data to the new marine digital interface (NMEA 2000). Critical engine, transmission, and genset data is then distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000 compatible display. The J2K100 can also be used as part of a complete fuel computer. Simply connect the J2K100 together with Maretron universal displays (DSM200/DSM250/N2KView) and GPS antenna/receiver (GPS100).
N
Maretron’s Smart retractable depth/ speed/ temperature transducers, delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots - all with no programming or calibration necessary. ▪▪NMEA 2000 network connectivity ▪▪At 235kHz it can be used with a fishfinder ▪▪Plastic housing is compatible with any hull material
Maretron Engine Gateway
The SH-449CSTE series of self-diagnostic four-wire smoke detectors continually monitors its own level of sensitivity and its operational status, showing a visual trouble indicator if it encounters conditions out of its sensitivity range or fails internal diagnostics. The heat detector has a fixed temp point of 135°C. These smoke/heat detectors do not receive their power from the NMEA 2000 network. MRE SH-002
Maretron
83
Maretron Run Indicator Monitor
Maretron brings you plug-and-play engine and vessel monitoring electronics for distributing critical data throughout the vessel. Whether you’re down in the engine room or up at the fly bridge, all the information you need is available everywhere you need it. Gone are the days of disparate systems that fail to communicate with each other. With Maretron’s networked electronic components like engine and tank monitors, vessel data is combined for advanced features like fuel economy (MPG or GPM) or distance and time to empty (calculated from engine fuel rate, vessel speed from GPS, and fuel remaining from tank monitor). Finally, true vessel monitoring on a single network combining information for display anywhere and everywhere you need it.
▪▪Monitors and reports the running status of connected devices ▪▪Works with both AC and DC loads ▪▪Works with both automatically and manually switched loads ▪▪Can indicate the status of a wide variety of loads: Bilge pumps, Winches, Running lights, Transfer pumps, Exhaust/intake fans ▪▪Monitors fuel and detects presence of water in fuel MRE RIM100-01
Maretron Switch Indicator Monitor
Alternating Current (AC) Monitor
Monitors switch closure devices.
Maretron’s ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network.
▪▪Heat & Smoke detectors ▪▪Carbon monoxide detectors ▪▪Gas detectors ▪▪Bilge water detectors ▪▪Magnetic switches ▪▪Glass break detectors ▪▪Clogged fuel filter detection (excessive vacuum) ▪▪Door, hatch, and porthole magnetic switches
MRE ACM100-01
Accessories:
MRE M000630* MRE M000612*
* Request items
100 amp transducer w/cable 400 amp transducer w/cable
MRE SIM100-01
Maretron Direct Current Relay Module Contains 6 Direct Current (DC) relays, each capable of switching up to 10amps. The DCR100 connects directly to an NMEA 2000 network, so you can turn on and off the relays from any device onboard or remotely running Maretron’s N2KView software. The DCR100 easily handles resistive DC loads like lights, or inductive DC loads like pumps and motors. The DCR100 can also be used to switch AC circuits using external relays. An added benefit of the DCR100 is that it reports the current through each of the six channels. This allows you to determine if loads are drawing too little electrical current such as burnt out bulbs, or if the loads are starting to draw too much electrical current. ▪▪Six relays for on/off control over NMEA 2000 network ▪▪Each relay capable of carrying up to 10 amps ▪▪Individual relay electrical current monitoring ▪▪Automatic relay over current shutdown (shuts down at ≈ 12 amps) ▪▪Automatic relay thermal shutdown (over temperature protection)
Accessories:
MRE BHW100 MRE SH-002 MRE CO-CO1224T*
Bilge high water detector Smoke/heat detector Carbon monoxide detector
* Request item
Maretron Temperature Monitor ▪▪Measures the temperature for up to 6 temperature probes ▪▪Four channels for thermistor probes and 2 channels for high temperature thermocouple probes ▪▪Wide variety of applications supported with optional temperature probes (see below) MRE TMP100-01
Accessory Probes:
MRE TP-AAP-1 MRE TP-EGT-1 MRE TP-IP-1 MRE TR3K
Ambient air temperature probe Exhaust gas temperature probe Immersion temp probe Ring/under bolt temperature probe
MRE DCR100-01
Maretron Direct Current (DC) Battery Monitor An advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. ▪▪Battery Voltage & Current ▪▪Ripple Voltage ▪▪Battery Case Temperature ▪▪State of Charge ▪▪Time Remaining ▪▪Charge Efficiency Factor MRE DCM100-01
Accessories:
MRE LEMHTA200-S* MRE LEMHTA400-S* MRE LEMHTA600-S* MRE TR3K
* Request items
200 Amp DC transducer with cable 400 amp transducer w/cable 600 amp transducer w/cable Ring/under bolt temp probe
Maretron Fluid Pressure Monitor ▪▪Adapts up to six pressure transducers to the NMEA 2000 network ▪▪Each channel independently programmed to match pressure transducer characteristics ▪▪Each channel independently programmed in pressure/vacuum mode or tank level mode * Pressure transducers up to 5000 PSI available as a special order MRE FPM100-01
Pressure Transducers:
MRE PT-0-3PSI-01 0 TO 3 PSI MRE PT-0-5PSI-01 0 TO 5 PSI
Electrical / Electronics
Maretron Engine / Vessel Monitoring
Electrical / Electronics
84
Maretron
Maretron Fuel Flow Monitor
Maretron Tank Level Monitors
The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. Additional benefits of the positive displacement metering technology are the elimination of flow conditioning components such as straighteners and pulsation dampers. Other flow meter technologies require flow conditioning components that increase system and installation cost. The FFM100 also uses true temperature compensation with embedded temperature sensors within the meters. The returning fuel is generally hotter than the supply fuel and if not properly compensated, inaccuracies as much as 5% can occur in computing the engine’s fuel consumption. The FFM100 also detects momentary reverse flow in the fuel lines due to fluctuating pressure caused by the injection pump. Less accurate systems count the reverse fuel flow as part of the consumed fuel where the FFM100 properly accounts for momentary reverse flow.
Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor.
MRE TLM100-01 MRE TLM150-01
Tank level monitor (40”depth) Gasoline tank level monitor
Lastly, the FFM100 can be used for fluid types other than fuel (e.g., water, oil, etc.) by ordering the appropriate flow sender.
MRE TA-5H-1.5NPT MRE TAL-1.5NPT MRE TAL-5H MRE TFT-5H
Tank adapter Black water airlock 1.5 NPT SAE black water airlock SAE non-disp. hull focus tube
The FPM100 is NMEA 2000 certified so you can view any and all information anywhere on the vessel using a compatible NMEA 2000® display. The FFM100 is a key component of Maretron's N2KView® vessel monitoring and control system. MRE FFM100-01
Fuel Flow Sensors Connect the fuel flow sensor to the NMEA 2000 network via a FFM100 fuel flow monitor. The fuel flow sensors are compatible with fuel, lubricating oil, hydraulic fluid, or other clean petroleum based products and should not be used with any other fluid types. MRE M1AR MRE M2AR MRE M4AR
2-100 LPH 25-500 LPH 180-1500 LPH
Maretron Tank Level Adapter The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel where there are NMEA 2000 compatible ▪▪Adapts American standard (240-30 ohm) resistive senders ▪▪Adapts European standard (10-180 ohm) resistive senders ▪▪Calibrated for any resistance range from 0 to 300 ohms ▪▪Accommodates irregularly shaped tanks ▪▪16 Programmable tank types including fuel, fresh water, waste water, live well ▪▪Programmable tank number (s) up to 16 per tank type ▪▪Programmable tank capacity ▪▪Works alongside of analog gauges MRE TLA100-01
The TLM100 is capable of sensing fluid levels in tanks up to 40” (1.02m) in depth. It can be used for diesel, fresh water, waste water, black water, and oil tanks (use TLM150 for gasoline tanks). Unlike most tank senders that only work with rectangular tanks, the TLM100 can be calibrated for irregular tank shapes so you can know the true fluid level in your tanks. ▪▪Diesel tanks ▪▪Fresh water tanks ▪▪Live well tanks ▪▪Waste water tanks ▪▪Black water tanks
Accessories:
Maretron Diagnostic Tool The N2KMeter is a diagnostic tool for NMEA 2000 networks that allows users to validate NMEA 2000 network compatibility and operations during installation of a device or complete system, and diagnose possible network flaws or failures that occur on an operational network. N2KMeter provides the detailed technical information an NMEA 2000 troubleshooting expert needs, yet it simplifies and summarizes, allowing an NMEA 2000 novice to effectively identify and diagnose network problems. N2KMeter uses a patented integrated intelligence technique to summarize multiple NMEA 2000 network operational variables into a single health index. MRE N2KMETER-01
Maretron Rudder Angle Adapter The RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000 network. Compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. Can be calibrated for any resistance between 0 and 300 ohms. You can also use the RAA100 with existing analog gauges. ▪▪Rudder angle ▪▪Rudder order MRE RAA100-01
Maretron Maretron 3.5” High Bright Colour Display
Maretron Micro Cables & Connectors
Maretron's DSM150 is a high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM150 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad. In addition to the monitoring and display capabilities, the DSM150 features an alert/ alarm package and electrical switching capability.
MRE CM-CG1-CF00.5 0.5m MRE CM-CG1-CF01.0 1m MRE CM-CG1-CF-02 2m MRE CM-CG1-CF-03 3m MRE CM-CG1-CF-04 4m MRE CM-CG1-CF-06 6m MRE CM-CG1-CF-10 10m MRE CG1-100METER Micro bulk cable (gray) MRE CF-SPWRO5-CF Powertap tee 5m MRE CM-CF-4 4 Way multi-port box MRE FA-CF-ST Field att.conn.female MRE FA-CM-ST Field att.connector male MRE IT-CM-CF In-line termination res. MRE CM-CF-CF Micro tee MRE TR-CF Micro termination res.(female) MRE TR-CM Termination res.(male) MRE M000101 Micro cap for female connector MRE M000102 Micro cap for male connector MRE BHF-CM-CF Micro bulkhead feed-thru
The DSM150 will directly connect with any NMEA 2000® network and with the exception of AIS data will display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable. The DSM150 displays a multitude of information including AC power, anchor status, battery, depth, electrical distribution, engine, environment, fuel management, GPS, heading, navigation, pressure/vacuum, rudder, speed, status indicators, tanks, temperature, time, transmission, water makers, weather, wind and more. The DSM150 includes a comprehensive, flexible alert capability. Configure audio and visual alerts on virtually any data that the DSM150 is capable of monitoring. Available alert types include: ▪▪High Alert ▪▪Low Alert ▪▪Inside Radius Alert ▪▪Data Unavailable Alert ▪▪On Alert ▪▪Off Alert MRE DSM150-02
▪▪Tripped Alert ▪▪Course Alert ▪▪GPS Quality Alert ▪▪Outside Radius Alert ▪▪Inside Radius Alert ▪▪Direction Alert ▪▪Timer Alert
Maretron Colour Display A high-resolution sunlight viewable 5.7” colour display that allows easy interpretation of NMEA 2000® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad. Unlike traditional single-display units, DSM250 users can choose numeric, gauge, or graph formats in single or multiple displays, with cycling options possible for a wide range of favourite data. These multiple display options conserve mounting space and reduce overall system cost. The DSM250 will directly connect with any NMEA 2000 network and display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable. Available alert types include: ▪▪High & low alerts ▪▪Inside radius alert ▪▪Data unavailable alert ▪▪On & off alerts ▪▪Tripped alert MRE DSM250-01
▪▪Course alert ▪▪GPS quality alert ▪▪Outside radius alert ▪▪Inside radius alert ▪▪Direction alert ▪▪Timer alert
Micro Dbl-Ended Cordsets
Maretron Mini Cables & Connectors Mini Double Ended Cordsets MRE NM-NB1-NF-00.5 0.5m MRE NM-NB1-NF-01.0 1m MRE NM-NB1-NF-02.0 2m MRE NM-NB1-NF-03.0 3m MRE NM-NB1-NF-04.0 4m MRE NM-NB1-NF-05.0 5m MRE NM-NB1-NF-06.0 6m MRE NM-NB1-NF-08.0 8m MRE NM-NB1-NF-10.0 10m MRE NG1-100 Mini bulk cable (gray) MRE FA-NF-ST Field att. connector female MRE FA-NM-ST Field att. connector male MRE NF-NM4P-NF Powertap MRE NM-CF-NF Mini/micro tee MRE TR-NM Termination res.(male) MRE TR-NF Termination res.(female) MRE BHF-NM-NF Mini bulkhead feed 1.5” NPT MRE NM4P-05 Power cordset 5m
Maretron Mid Single Ended Cordset MRE DF-DB1-25.0 25M Blue
Maretron Mid Cable Dbl-Ended Cordsets MRE DM-DB1-DF-00.5 0.5m MRE DM-DB1-DF-01 1m MRE DM-DB1-DF-02 2m MRE DM-DB1-DF-03 3m MRE DM-DB1-DF-04 4m MRE DM-DB1-DF-06 6m MRE DM-DB1-DF-08 8m MRE DB1-100 Mid bulk cable (blue)
Electrical / Electronics
Unlike traditional single-display units, DSM150 users can choose numeric, gauge, bar or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost.
85
You build the boat. We power it. Mastervolt offers a complete range of power products designed to work independently or easily integrate, forming comprehensive systems that meet the boaters’ needs. From chargers to inverters to batteries to digital switching networked systems, all Mastervolt products offer advanced technology specifically designed and constructed for marine applications that meet rigorous global marine standards. With worldwide support, Mastervolt provides the power to be independent. For more information about the Mastervolt product line, visit mastervolt.us.
mastervolt.us
Mastervolt
87 N
Mastervolt PowerCharge Battery Chargers
W E
Clean output:
Electrical / Electronics
♦ PowerCharger includes a regulated power supply providing a very clean output, no distortion, which provides better power to the batteries extending battery life. The charger is able to power your system without batteries or recover a flat battery.
Powerful:
♦ PowerCharger’s maximum output is rated at peak (14.4V) rather than at rest (12V). Thus, the PowerCharger provides more power for your charging needs. - 20A charger - 288 Watts of power - 40A charger - 576 Watts of power
Robust connections, easy installations
Ability to precisely charge your batteries:
♦ PowerChargers can charge lead acid, gel, AGM, spiral batteries or they can be set to exact voltages during the charging stages. PowerChargers are power factor corrected, providing maximum efficiency from the available source.
Functional design, easy to install
Compact Size and Lightweight:
♦ PowerChargers utilize high frequency switch mode technology which makes them very efficient and compact and eliminates the need for heavy transformers.
Easy-to-Install, Operate, Functional Design:
Clear readout panels
♦ Design includes handles, captive screws and clearly identified connections. The easy to operate front panel displays power on/off, settings and state of charge information. MSV 44-21-0200 12V/20A MSV 44-21-0400 12V/40A GENERAL SPECIFICATIONS
44-21-0200
44-21-0400
Nominal input voltage & frequency
120/240 V AC (90-135 & 180-265 V AC), 50/60 Hz
Nominal output voltage
12 V
Total charge current (up to 104 °F)
20 A @ 14.4 V
40 A @ 14.4 V
Number of battery outlets
3 full outputs
Battery type settings
Lead acid, gel, AGM or spiral
Dimensions & weight
8.3”x 5.1”x 2.4” / 2.2 lbs
11.5”x 8.3”x 5.2” / 8.8 lbs
Recommended battery capacity
40-200 Ah
70-350 Ah
Power factor regulations
>0.98
Voltage compensation
Yes, by means of automatic compensation
Temperature compensation
Battery temperature sensor may be purchased separately, part # 41500500
DC consumption
< 5 mA
Display
Unit has a display for charge current/voltage & charger status indication, monitoring up to 3 battery banks
Temperature range
Minus 13 °F to 149 °F, derating above 104 °F
Cooling
Variable speed fans and natural cooling
Sound level
< 52 dBA @ 1 m
Protection degree
IP23
Approvals
CE certifi ed, meets ABYC & UL 1236 requirements EMC FCC Class B
Safety
Over temp. shutdown, ignition protected, overload protection, surge and short circuit protection
MasterBus connectivity
PowerChargers are NOT compatible with MasterBus. Please use the Mastervolt ChargeMaster series.
88
Mastervolt
Electrical / Electronics
Mastervolt Mass Sine Wave Inverters Mastervolt inverters allow you to easily transform the DC voltage of your 12V or 24V battery to 120V/60Hz AC. ▪▪True sine wave clean output power for sensitive devices such as electronics ▪▪High surge capacity for motor loads such as air conditioning ▪▪Utilizes high-frequency switch mode technology, highly efficient ▪▪Small, lightweight and quiet ▪▪High surge power output when starting ▪▪AC power always available even without shore power or generator power ▪▪Energy efficient ▪▪Electronic components are perfectly shielded ▪▪Easy installation and operation ▪▪CE Certified, meets ABYC requirements ▪▪Two year warranty ▪▪Mastervolt’s Masterbus CANbus compatible (requires the Masterbus inverter interface #77-02-0700) ▪▪Optional remote panel #07-04-04110 available ▪▪H: 16.5” x W: 12.5” x D: 5.1” Part #
MSV 25-01-2000*
MSV 25-02-2500*
DC Input
12V
24V
Continuous Power
2000W
2500W
Surge Capacity
4000W
5000W
Weight
20.7 lbs
21.4 lbs
HxWxD
16.5" x 12.5" x 5.1"
16.5” x 12.5” x 5.1
* Request Items
Mastervolt Mass Combi Sine Wave Inverter/Chargers The Mastervolt Mass Combi includes a professional-grade inverter, automatic transfer switch and advanced three-stage-plus battery charger in a lightweight, compact design. These units are are half the weight, and consume less than half the power of traditional inverter/chargers. ▪▪True sine wave clean output power for sensitive devices such as electronics ▪▪Utilizes high-frequency switch mode technology, highly efficient ▪▪Mastervolt’s three-step plus charging method guarantees fast, easy charging for all battery types (lead-acid, gel, AGM, lithium ion). The built in memory function prevents overcharging. ▪▪Ability to revive a “dead” battery and functions as a clean DC power supply even with no battery attached. ▪▪Charges two battery banks (second outpout 5A) ▪▪User selectable functions: Low battery cutoff, shore power current, charger amps, charging voltage, battery type, power boosting and power sharing functions, charger only function ▪▪CE Certified, E certified according to automotive directive 95/54/EG, meets UL and ABYC requirements ▪▪Includes ICC remote panel (70-40-5050), and battery temperature sensor with 19’ cable ▪▪Two year warranty ▪▪Customizing a system is easily accomplished through MasterBus 70-40-5050
▪▪Mastervolt Masterbus CANbus compatible with the Masterbus Combi interface #77-03-0475) DC Input Voltage
Continuous Power
Surge Capability
Charger Output
Weight lbs
HxWxD
MSV 37-01-2505*
12V
2500W
4000W
100A @14.25V
24.3
19.5” x 12.5” x 6.1”
MSV 37-01-4005*
12V
3750W
4000W
200A @14.25V
46.3
19.5” x 12.5” x 11”
MSV 37-02-2505*
24V
2500W
4000W
60A @28.5V
24.3
19.5” x 12.5” x 6.1”
MSV 37-02-4005*
24V
3750W
4000W
100A @28.5V
46.3
19.5” x 12.5” x 11”
Part #
*Request Items
Mastervolt
89
Mastervolt Combi Interface
Remote panel for reading the charge status of your battery charger, including error notifications ▪▪Display/read-out: 7 LEDs ▪▪Dimensions: 60 x 65 mm ▪▪Weight: 0.07 kg ▪▪MasterBus powering capability: yes
The Mastervolt Mass Combi can be monitored and controlled from a MasterBus network via the MasterBus Combi Interface. This enables you to add control of your Mass Combi to any MasterBus display, for example the MasterView Easy panel. ▪▪66 x 78 x 32 mm
MSV 77-01-0050*
*Request Item
MSV 77-03-0475
Mastervolt Master Shunt
Mastervolt Masterview Easy Touch Remote ▪▪Allows the monitoring and control of multiple MasterBus devices on one panel ▪▪3.5” Touch screen ▪▪Multi language operation ▪▪Compatible with the Mastervolt MasterBus network plug-and-play ▪▪Low power consumption ▪▪Integrated buzzer ▪▪No external power supply needed ▪▪Night view backlight ▪▪Alarm indication via backlight colour ▪▪Key board lock function ▪▪Flush front mounted and adhesive template ▪▪Fits in Raymarine/Simrad size 110 x 110 x 20mm MSV 77-01-0305
MSV 07-04-04110*
▪▪Recreational and semi-professional use ▪▪Easy to install using included mounting bracket ▪▪Excellent price/performance ratio ▪▪More power available for two minute intervals, ideal for active marine telephone use ▪▪50A continuous ▪▪Max. output power: 720 W ▪▪Dimensions: 300 x 76 x 110 mm ▪▪Weight: 1.2 kg MSV 81400350
*Request Item
Mastervolt Battery Mate While battery isolators are conventional diode splitters, the Battery Mate’s technology is electronic and includes mosfets (transistors). for no voltage drop. Its components compensate for variations in voltage and ensure that charging continues at the right voltage level, even with several battery banks, with an alternator maximum of 160Ah at 12V or 24V. The Battery Mate is easy to install on a DIN rail (industry standard). ▪▪Protects batteries & onboard equipment ▪▪Complete charging & simultaneous charging ▪▪Ignition proof ▪▪Adjustable set-points ▪▪Input: battery charger or alternator ▪▪H: 207 x W: 140 x D: 80 mm MSV 8-31-16025
2 batteries
Mastervolt Battery Temperature Sensor MSV 04-15-00800* 49’
*Request Items
W
For use with the Mass Sine Series inverters Model C4-RI, has an inverter on/off switch, an ‘on’ indicator and a 'fault’ indicator. Possible faults include battery voltage too low, overload, or a short circuit in the AC circuitry. ▪▪60 x 65 mm x D: 60 mm
Mastervolt 24/12 DC-DC Converter - 50A
E
Mastervolt Remote Panel
MSV 77-02-0100 N
Accessories:
MSV 65-02-100150 15 meter cable for remotes
MasterShunt integrates the main system fuse with the shunt adding new technology to take analog battery information and turn it into digital information that can be read on the MasterVolt MasterView digital touch screen remote displays. All battery conditions, events and capacity can be displayed. The MasterShunt removes all the complexity of sense wires, small fuses in signal wires and the main system fuse. ▪▪Real time clock for auto functions ▪▪300 Amps continuous ▪▪Monitored, built-in 500 amp fuse ▪▪For loads over 300 amps use two shunts ▪▪Compatible with Mastervolt’s MasterBus CANbus network ▪▪Auto start/stop for the generator ▪▪5.9" x 5.9" x 2.5"
Electrical / Electronics
Mastervolt MasterView Read-Out
90
Professional Mariner E W
Electrical / Electronics
N
Professional Mariner Gen-3 ProSport Series Battery Chargers ▪▪Promar digital technology ▪▪System ok and battery bank trouble status indicators ▪▪Digital multi-stage performance charging ▪▪Energy saver mode ▪▪Storage recondition mode ▪▪Distributed-on-demand technology ▪▪Digital led display and battery type selector ▪▪Built-in quality & safety ▪▪Pre-wired for easy installation ▪▪90-135VAC input ▪▪Two year warranty
Professional Mariner ProNauticP Battery Chargers ▪▪12 selectable charge profiles ▪▪Conservation energy saver mode ▪▪Dual digital displays with power output bar ▪▪On board self test start up diagnostics ▪▪Automatic battery health mode ▪▪LED illuminated service and fault modes ▪▪Automatic fan speed control ▪▪Automatic temperature compensation (probe included) ▪▪Global AC input 100-260 VAC 50/60 hz ▪▪Power factor corrected: fully automatic wide range AC input ▪▪L: 10.25” x W: 8.5” x H: 3.5” ▪▪5 year warranty Part #
Volts
Amps
Banks
Weight
PRO 63120
12
20
3
5 lbs
PRO 63130
12
30
3
5 lbs
PRO 63140
12
40
3
5 lbs
Volts
Amps
Banks
LxWxH
Weight
PRO 43006
12
6
1
7.125” x 7.25” x 2.75”
2 lbs
PRO 43008
12/24
8
2
8.375” x 7.25” x 2.75”
3 lbs
PRO 43012
12/24
12
2
9.875” x 7.25” x 2.75”
4 lbs
Optional Remote Display
PRO 43020
12/24
20
2
12.125” x 7.25” x 2.75”
5 lbs
PRO 43021
12/24/36
20
3
12.125” x 7.25” x 2.75”
6 lbs
When installed, it will display the current status of the charger along with the voltage and amperage. 1. The blue LED is illuminated when the power is ON 2. BACKLIGHT can be set to ON or OFF by toggling the BACKLIGHT button, default is ON 3. ALARM can be silenced or audible by toggling the ALARM button, default is audible ▪▪Includes cable and network plug ▪▪L: 4-1/4" x W: 2-3/4" x D: 7/16"
Amps
Banks
LxWxH
Weight
PRO 31410
12/24
10
2
9" x 5.25" x 2"
8 lbs
PRO 22034
Professional Mariner Hand Held Digital Multimeter ▪▪Large LED display ▪▪Back light feature ▪▪Measurement and hold feature ▪▪Built-in EZ stand ▪▪Continuity tone alert ▪▪Test leads and battery included ▪▪5-3/4” x 2-7/8” x 1-1/2” PRO 87730
W
PRO 10116
Installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. ▪▪Built on a robust FlatPack semiconductor platform (in the event of a failure, the ground continuity on-board is not compromised when connected to AC Shore Power) ▪▪ABYC A-28 July '08 Compliant and Fail Safe Certified ▪▪Certified by Underwriters Laboratories (UL) ▪▪Ignition Protected ▪▪Meets ISO 8846, can be mounted in an engine room ▪▪Shore cord inlet compatibility: Single 15, 16, 20 or 30 ▪▪Gold plated terminations ▪▪Input: 120 VAC, 50/60Hz ▪▪L: 6.75" x W: 7" x H: 2.5" ▪▪3 lbs
E N
▪▪1.5 amp output, designed to maintain batteries up to 250 amp hours ▪▪Precise voltage regulation (13.4 VDC float mode) ▪▪Does not drain battery if AC is off ▪▪LED light signifies proper operation ▪▪Cannot over charge ▪▪Reverse polarity protected ▪▪Current limiting ▪▪Over temperature protection ▪▪Wall or bulkhead mount, AC cord, and 5 foot DC output wires ▪▪2.2” x 3.5” x 3.9”
W
E
N
Professional Mariner ProSport Battery Maintainer
W
Volts
Professional Mariner ProSafeFS Galvanic Isolation
E
Part #
PRO 63100 N
▪▪Fully Automatic Multi-Stage Charging Charge, condition and maintain batteries with a built-in safe maintenance mode ▪▪Single Preset Charging Profile - Use with flooded (Lead-Acid) or GEL batteries ▪▪Expanded LED Status Center - At-aglance AC power, charging and ready / maintain LED indicators ▪▪Distributed-On-Demand Technology - Automatically charges and maintains your engine crank battery while distributing all remaining charging amps to your trolling motor batterie(s) ▪▪Built-in Quality & Safety - 100% epoxy filled - Completely waterproof & shockproof. Dual in-line DC safety fuses (multibank models), reverse polarity, ignition and temperature protection
W E
W
E
N
Professional Mariner Battery Charger
N
Part #
91
Samlex
E N
Samlex PST Pure Sine Inverters
Samlex SSW Pure Sine Inverters
▪▪Silent Operation temperature controlled fan reduces energy consumption ▪▪Extremely low interference with other devices ▪▪GFCI protected outlets ▪▪1500 and 2000W models can be hard-wired ▪▪Input: 12 VDC, Output: 120 VAC ▪▪Low idle power draw ▪▪Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up ▪▪Wide operating DC input range compatible with new high voltage alternators ▪▪Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit ▪▪Optional remote controls available for select models
▪▪High surge, 2x continuous operating power ▪▪Soft start technology - the unit ramps up gradually, putting less strain on the inverter and the load ▪▪Compact and lightweight ▪▪Universal circuit protection: thermal, battery, overload, short circuit, earth fault ▪▪350W and 600W units have a USB charging port ▪▪1000W, 1500W, and 2000W models include an LCD ON/OFF remote control
Part #
Watts
Dimensions
Weight
SMX PST-300-12
300
9.69" x 5.76" x 2.58"
3.46 lbs
SMX PST-600-12
600
10.87" x 9.47" x 3.23"
5.9 lbs
SMX PST-1000-12
1000
15.63" x 9.47" x 3.23"
8.8 lbs
SMX PST-1500-12
1500
18.43" x 10.35" x 4.16"
15.6 lbs
SMX PST-2000-12
2000
18.43" x 10.35" x 4.16"
15.6 lbs
Samlex PST Remote ▪▪For use with PST-600 & PST-1000 ▪▪Remote push button on/off ▪▪LED indicators for overload, over temperature and power 15' of cable ▪▪9 x 6.4 x 2.8 cm SMX RC-15A
Samlex PST Remote ▪▪For use with PST-1500 & PST-2000 ▪▪LCD indicates AC volts, AC amps, frequency, power (watts) and power factor ▪▪15' of cable ▪▪11 x 6.5 x 2.5 cm SMX RC-200
Part #
Electrical / Electronics
Samlex America, Inc. has manufactured and distributed power supply products to more than 90 countries worldwide since 1991. Innovative product designs, strict quality control, and responsible after sales service provide customers with high quality power conversion products at extremely competitive prices.
W
Power Conversion Products
Best Customer Service in the Industry - Fast delivery backed by extensive inventory in multiple strategically located warehouses - Pre-sales application specific product selection assistance - Post sales installation and troubleshooting guidance - Fully context aware of industry applications in our markets - Technically competent customer service staff - ISO9000 Certified - Minimum 2 Year Warranty
Watts
Dimensions
Weight
SMX SSW-350-12A
350
7.87" x 6.1" x 2.24"
1.5 lbs
SMX SSW-600-12A
600
9.06" x 6.1" x 2.24"
2.0 lbs
SMX SSW-1000-12A
1000
10.43" x 8.74" x 3.46"
5.7 lbs
SMX SSW-1500-12A
1500
12.2" x 8.74" x 3.46"
7.1 lbs
SMX SSW-2000-12A
2000
12.2" x 8.74" x 3.46"
8.4 lbs
92
Samlex Samlex Inverter Installation Kits
Part #
Kit contains a pair of heavy duty gauge cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection. ▪▪High strand count, annealed copper conductors Part #
Watts
Dimensions
Weight
SMX SAM-250-12
250
5.9" x 4.5" x 1.8"
0.9
SMX SAM-450-12
450
5.9" x 6.1" x 2.2"
1.2
SMX SAM-800-12
800
8.6" x 7.1" x 2.3"
2.9
SMX SAM-1000-12
1000
9.8" x 7.1" x 2.3"
3.7
SMX SAM-1500-12
1500
11.1" x 8.0" x 3.3"
7.0
SMX SAM-2000-12
2000
13.6" x 8.0" x 3.30"
8.5
Samlex SAM Remote ▪▪Power ON/OFF ▪▪10' cable with RJ45 Connector ▪▪Bar meter monitor for battery charge level and output power ▪▪LED indicator lights for: Over & under voltage protection, Over temperature protection and Overload protection ▪▪11.5 x 7 cm SMX SAM-RC
Samlex Modified Sine Inverter ▪▪100 watt modified sine wave Inverter ▪▪Low interference, high efficiency modified sine wave DC-AC inverter ▪▪Convert 12 VDC to 115 VAC at an output frequency of 60 Hz ▪▪Connect through any 12V lighter socket in your car, boat, truck or RV ▪▪Protection: low battery, over temperature, over voltage, overload, short circuit, earth fault ▪▪Includes one three prong outlet and a USB Charging Port (5 VDC, 500 mA) ▪▪LED indicator for power status ▪▪ETL Safety Listed SMX SAM-100-12
W
▪▪Models 250W to 800W include a USB charging port (5 VDC, 500 mA) ▪▪Compact design ▪▪Cigar lighter plug and battery clamps included (250W, 450W and 800W only) ▪▪Load controlled cooling fan ▪▪Low battery input alarm ▪▪Universal protection circuit: thermal, battery, overload, short circuit, earth fault ▪▪Soft start technology ▪▪Cool surface technology ▪▪Low interference technology
E N
Electrical / Electronics
Samlex SAM Modified Sine Inverters
Inverter
Cable
Fuse
SMX DC-1000-KIT
12V, 600-1000 W 24V, 600-2000 W
AWG #4
100 amp
SMX DC-2000-KIT
12V, 1000-2000 W 24V, 2000-3000 W
AWG #2
200 amp
Low-loss ethafoam spacer for strong mechanical support Stranded, high-quality tinned copper inner conductor maximizes signal strength Exclusive white fiberglass seals out moisture to prevent corrosion. Rugged, high-gloss, non-yellowing finish assures long-lasting beauty.
High-quality, silver-plated brass outer element for extended life, maximum efficiency and superior mechanical strength
Low-loss polyethylene dielectric Stainless steel ferrule resists corrosion
Ultra efficient, silver-plated brass choking sleeve suppresses cable radiation for maximum on-air signal
Flexible coax that has higher power capabilities, less loss per foot, UV stable jacketing, stranded copper core, and copper shielding to help maximize antenna performance
www.shakespeare-marine.com
94
Shakespeare
Electrical / Electronics
Shakespeare 5' Centre-Fed 1/2 Wave Coaxial Sleeve VHF Antennas Outstanding, basic 3dB antenna designed to reduce signal fading in rough seas. This is probably the most widely used antenna on coast guard vessels. ▪▪Brass and copper elements ▪▪Chrome-plated brass ferrule with 1”-14 thread ▪▪Includes a PL-259 connect & 15' RG58 cable ▪▪One section
Shakespeare 36" Squatty Body End-Fed 1/2 Wave VHF Antennas A favourite with sailboat owners, this light weight, low profile, stainless steel antenna was specially designed for masthead mounting. ▪▪Hermetically sealed, tin-plated copper wire coil ▪▪Stainless steel body and whip ▪▪SO-239 connector ▪▪Mount: Stainless steel “L” bracket (supplied)
SHA 396-1 5MHz
The 396-1-AIS has been specially designed to meet the broader bandwidth requirements of all popular AIS transceivers SHA 396-1AIS 6MHz
SHA 5215
Same features as the 5215 but comes complete with 60' of low-loss RG-8/X cable and a PL259 connector
Shakespeare 8' Collinear Phased 5/8 Wave VHF Antenna
SHA 5215C-X
A favourite of maritime professionals, this rugged antenna boasts an extra heavy-duty radome and powerful internal elements for reliable service day after day under the most demanding conditions. ▪▪Brass and copper elements ▪▪Chrome-plated brass ferrule with 1”-14 thread ▪▪Includes a PL-259 connect & 15' RG58 cable ▪▪One section
Parts:
SHA 5215L/BRKT “L” Bracket for 5215
Shakespeare 36" Low Profile End-Fed 1/2 Wave VHF Antenna The perfect choice for bass boats, centre console fishing boats, or any vessel where compact size is most important. Comes with a standard-duty stainless steel whip. Chrome plated brass canister minimizes de-tuning. ▪▪Sealed, tin-plated copper wire coil ▪▪Requires mount with centre hole for passage of the supplied 15’ RG-58 cable. PL-259 connector included ▪▪Stainless steel whip SHA 5240-R
SHA 5202
Shakespeare 8' End-Fed With Matching Stub VHF Antennas
Standard whip
Shakespeare 5' Centre-Fed 1/2 Wave Coaxial Sleeve VHF Antenna Shakespeare’s most economical 5’ antenna package. A great, basic 3dB antenna for day-to-day cruising in calm to moderate seas. The antenna has an integral polycarbonate Lift-n-Lay mount for deck mounting, and comes with a levelling plate and installation hardware. ▪▪Brass and copper elements ▪▪Includes a PL-259 connect & 15' RG58 cable ▪▪Integral deck mount ▪▪One section
An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. ▪▪Quality copper cable elements ▪▪Chrome-plated brass ferrule with 1”-14 thread ▪▪Includes a PL-259 connect & 15' RG58 cable ▪▪One section SHA 5206-BL-C SHA 5206-C SHA 5206-N
Chrome brass ferrule, black Chrome brass ferrule, white Nylon ferrule
For matching CB antenna order SHA 5205
SHA 420 Part #
Length
Gain
Max. Input Watts
SWR Nominally
Bandwidth within 2.0:1 SWR
Termination
SHA 420
5'
3dB
50
1.5:1 @ 156.8 MHz
5MHz
15' RG-58 cable
SHA 396-1
5'
3dB
50
1.5:1 @ 156.8 MHz
5MHz
15' RG-58 cable
SHA 396-1AIS
5'
3dB
50
1.5:1 @ 156.8 MHz
6MHz
15' RG-58 cable
SHA 5202
8'
6dB
50
1.5:1 @ 156.8 MHz
3MHz
20' RG-58 cable
SHA 5206-C & N
8'
6dB
50
1.3:1 @ 156.8 MHz
3MHz
15' RG-58 cable
SHA 5215
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
SO-239
SHA 5215C-X
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
60' RG-8X cable
SHA 5240-R
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
15' RG-58 cable
Shakespeare
95
Shakespeare 8' Galaxy 'Extra Tough' 6dB VHF Antennas
The Centennial antennas have a high-gloss, polyurethane finish that won't turn yellow in the sun. ▪▪End-fed with matching stub ▪▪Brass and copper elements ▪▪Chrome-plated brass ferrule with 1”-14 thread ▪▪Includes 15’ RG-58 cable and a PL-259 connector ▪▪Gain: 6dB ▪▪Max. watts: 50 ▪▪SWR Nominally: 1.5:1 @ 156.8 MHz ▪▪Bandwidth: 5MHz ▪▪One 8' section
Shakespeare’s best – maximizes range and quality in a great looking antenna. The new 5225-XT is Shakespeare’s classic Style 5225 in a new, stronger, stiffer radome. It’s extra tough for use on hard tops, T-tops, radar arches, or wherever its extra resistance to high winds and high speeds is welcome. ▪▪Brass and copper elements ▪▪Stainless steel ferrule with standard 1”-14 thread ▪▪20’ RG-8/X low-loss cable plus a PL-259 connector ▪▪Twin to: Galaxy Style 5223 CB antenna Max. Power Input:..........100 watts SWR: ..............................nominally 1.5:1 at 156.8 MHz Bandwidth:......................3 MHz within 2.0:1 VSWR
SHA 5101
Shakespeare Sailboat Racers VHF Antenna ▪▪Super light-weight black stainless steel antenna ▪▪Gold-plated connector ▪▪End-fed, center-loaded design ▪▪Black L-bracket included for mast mounting ▪▪One 15" section SHA 5216
The Galaxy-XP Silver Series Galaxy performance starts with innovative and sophisticated electrical engineering. Then, highly skilled craftsmen hand assemble and hand finish each antenna, using only the best materials. Guaranteed Galaxy quality comes with a quality guarantee: five years.
Shakespeare 4' Galaxy 'Little Giant' 3dB VHF Antennas Center-fed 1/2 wave coaxial sleeve. An outstanding, 4’ antenna of heavy-duty construction for general purpose communications. It’s at home on T-tops, hard-tops and other positions aloft, where its small size can deliver maximum range. ▪▪Brass and copper elements to maximum range ▪▪Stainless steel ferrule w/ standard 1”-14 thread ▪▪Includes 20’ RG-8/X cable and a PL-259 connector Max. Power Input:......... 50 watts SWR:.............................. Less than 1.5:1 at 156.8 MHz Bandwidth:..................... 5 MHz within 2.0:1 VSWR SHA 5400-XT White SHA 5401-XT Black
SHA 5225-XT White SHA 5226-XT Black
Shakespeare 4' Galaxy AIS 'Little Giant' 3dB VHF Antenna Specially designed to meet the broader bandwidth requirements of all popular AIS transceivers. Commercial-grade fibreglass construction. ▪▪Center-fed 1/2 wave coaxial sleeve ▪▪Brass and copper elements to maximize range ▪▪Stainless steel ferrule w/standard 1”-14 thread ▪▪Includes 20’ RG-8/X cable and a PL-259 connector ▪▪One Section Max. Power Input:..........50 watts SWR: ..............................nominally 1.5:1 at 158 MHz Bandwidth:......................5 MHz within 2.0:1 VSWR SHA 5396-AIS
Shakespeare 2' Galaxy 8dB Wi-Fi Antenna This Shakespeare Galaxy antenna brings Wi-Fi to the marine environment. It features an N-type connector and a special sleeve-collar ferrule design that accommodates larger diameter coax. Should the antenna ever need to be replaced, it can be done without rerunning the coax. ▪▪2.4 GHz band ▪▪Hi-tech PCB copper elements ▪▪Stainless steel 1"- 14 thread ferrule with special sleevecollar design ▪▪One section SHA 5248
Electrical / Electronics
Shakespeare Centennial Series VHF Antenna
96
Shakespeare N
Shakespeare 3' AM/FM Antenna
W E
Electrical / Electronics
This combination antenna features a distributive load for super signal pulling power. The coil is permanently sealed in Shakespeare’s white fibreglass. ▪▪Includes 10’ RG-62 coax with Motorola plug ▪▪1”-14 thread for standard mount. ▪▪One section, 39” overall length
Shakespeare SeaWatch Marine TV Antennas The SeaWatch series of TV antennas are omni-directional over-theair digital HDTV solutions that bring sleek lines and 360 degrees high-performance coverage to your watercraft. Designed to accept common 1”-14 threaded mounts, the antennas are well suited to fit virtually any application. Everything needed to connect the antenna to your converter or television is in the box. When paired with an optional 2-way band separator between the antenna and the amplifier, these antennas can also receive AM/FM radio signals. ▪▪Frequency Range: VHF:47-230MHz;UHF: 470-862MHz ▪▪Receiving Range: FM/VHF/UHF ▪▪Gain: 30dB ▪▪Noise Figure: 3db ▪▪Max. output lever: 110dBuV ▪▪Impedance: 75ohms ▪▪Connector: F-connectors ▪▪Power Supply: DC 12V, AC 110V ▪▪Dimensions: 19” x 3”
SHA 4351
Shakespeare AM/FM Antenna This innovative design lets you put an AM/FM antenna on your boat where it won’t get in the way. It is a clear tape with embedded antenna elements. Its permanent adhesive strip lets you attach it quickly and easily onto your boat’s windshield or any smooth, nonmetallic surface. It comes with a 6’ cable and attached “Motorola type” plug.
Package Includes: ▪▪Panel TV antenna ▪▪20’ RG-59 coax cable/F-connectors ▪▪USB/AC/DC power cords
SHA 4353
Shakespeare AM/FM Marine Band Separator
15” Antenna ▪▪For up to 65 km (40 miles) from broadcast towers
Eliminate the need for separate AM/FM and VHF antennas. As well operate your AM/FM and VHF radio at the same time. Includes 10' of RG-62 coaxial cable and 3' of RG-58 VHF cable. SHA 4357-S
SHA 3015
19” Antenna ▪▪For up to 120 km (75 miles) from broadcast towers SHA 3019
For base loaded antennas such as the 5215, 5240-R, 5241-R.
W
E
N
Shakespeare Flat HDTV/FM Antenna This razor-thin, multi-directional amplified antenna is the most advanced dual band (VHF/UHF) antenna on the market. Designed with Clear Circuit Technology, the embedded amplifier is able to amplify 100% of the signal at the element to maximize channel reception and minimize pixelation and dropouts for the best viewing experience possible ▪▪Low noise amplifier ▪▪Multi-directional ▪▪Recieves ALL local HD broadcast signals ▪▪AC, DC and USB power adapter ▪▪Best suited for areas up to 15 miles from broadcast towers ▪▪Frequency range: 47-230MHz, 470-862MHz ▪▪Receiving Range: FM/VHF/UHF ▪▪Gain: 28dB ▪▪Noise figure: ≤3dB ▪▪Max output level: 100dBuV ▪▪Impedance: 75ohms ▪▪Power supply: AC/DC adapter (DC 12V/50mA) ▪▪Power supply: DTV set-top box (DC 5V/40mA) ▪▪Dimensions: 12” x 13 SHA 2061
Shakespeare 21" Diameter Omnidirectional Marine TV Antenna Designed specifically for maximum omnidirectional performance in the marine environment. TV Antenna system includes the antenna with built-in 1"-14 thread nylon ferrule, AC/DC switchable power supply, 30' of ultra low loss RG-59 coax cable, and gold plated screw-on "F" type connectors. ▪▪Omnidirectional antennas capture VHF, UHF, and FM point of the compass without aiming the antenna. ▪▪21-inch diameter ▪▪110VAC or 12/24 DC power ▪▪Digital HDTV-ready SHA 2030G
Shakespeare Shakespeare Galaxy SRA-40 Satellite Radio Antenna
SHA SRA-40
Includes SM31 mounting kit
Shakespeare Galaxy SRA-25 Satellite Radio Antenna Specially designed for smaller boats. Accommodates a variety of mounting methods, with or without running its cable through the mounting surface. Comes with a 25-foot RG-174 cable. Attach to surfaces up to 1” thick via 9/16” diameter threaded shaft, or use the included SM-32 surface mounting kit to secure the antenna to flat surfaces where access to the area underneath is difficult or impossible. ▪▪H: 3/4" x W: 2-3/8" x L: 2" ▪▪No separate power cable required ▪▪Single cable design for newer receivers ▪▪Shakespeare Limited Warranty: 1 year SHA SRA-25
Shakespeare Gold Plated Brass Connector ▪▪For RG-8/AU & RG213 coax ▪▪Standard solder type SHA PL259-G
Shakespeare Gold Plated Brass Connector ▪▪PL-259 connector with UG176 adapter & DooDad® for RG-8X cable ▪▪Standard solder type SHA PL259-8XG
Shakespeare Cable Outlet Chromed brass cable outlet with internal rubber grommet grips cable for tight bulkhead seals. For RG-8/AU, 8X, 58, 59, 213 cables. SHA 4184
Shakespeare Nylon Ratchet Mount ▪▪Solid nylon ▪▪Four-way ratchet design with handle ▪▪For deck or bulkhead mounting ▪▪Standard 1"-14 thread male threads ▪▪For use with small antennas The Style 4186 is not for use with antennas longer than 8' in self-supporting mode.
Shakespeare Sirius Antenna Cable Kits
SHA 4186U
For longer cables runs, pick the appropriate length Shakespeare SRC Series cable kit for your installation. Connectors come pre-installed on all cables. These cable kits must be run as a single piece and cannot be joined together. ▪▪50 feet of marine grade RG-58
Shakespeare Stainless Ratchet Mount
SHA SRC-25 25' SHA SRC-50 50'
Shakespeare Automatic Switch This switch allows you to have two radios on one antenna. It mounts out of the way. When keying the microphone on one radio the AS-2 switches the antenna to it automatically. SHA AS-2
Shakespeare Gold Plated Centre Pin Connectors The perfect solution to troublesome task of installing a PL-259 connector or splicing a RG-58 A/U or RG-8/X coax. cable. These revolutionary, award winning design, connectors are solderless, fretless, gold plated and botchless. No measuring, no critical stripping, no fussing with coax. braid and no tinning. SHA PL258CP-G SHA PL259CP-G
For splicing RG-58 A/U and RG-8/X For RG-58 A/U and RG-8/X
Shakespeare Gold Plated Brass Adapter ▪▪Barrel connector for PL-259 ended cables SHA PL258-G
Stainless steel antenna base uses a four way ratchet design with locking handle for deck or side mount. Standard 1’’-#14 thread, 9/32’’ hole for cable feed. SHA 4187
Shakespeare Stainless Ratchet Mount ▪▪New designer look, four-way ratchet mount ▪▪Its simple lines come from a nutless design ▪▪Standard 1”-14 threads and a special cable slot that eliminates removal of most factory installed connectors ▪▪Bolt holes: 5/16” dia,, 3” x 1-1/2" on centre SHA 5187
Shakespeare Mounting Shims Shim kit for ratchet mounts consists of 4 shims, two each with front/back and side/side slope. Each shim adds a half-notch (5°) tilt. Stack them for extra height or for compound angles. SHA 414
Electrical / Electronics
At a 3.5” diameter, it’s ideal for smaller vessels. The low profile, white plastic housing mounts in a variety of ways with or without the included pedestal mount (pictured). When mounted directly to the surface, the antenna accommodates surfaces up to 1” thick. ▪▪1.36” high (4" with pedestal) ▪▪25-foot low-loss cable and connectors included ▪▪White UV-stabilized ASA plastic housing ▪▪1 year limited warranty
97
98
Shakespeare
Shakespeare Stainless Rail Mount
Shakespeare Extensions
▪▪Ratchet action for quick and easy installation onto 7/8''-1'' railing ▪▪For antennas up to 8' in length ▪▪Standard 1''-14 thread. 9/32'' hole for cable feed
1 foot, 1" thick white polycarbonate mast extension for light to moderate duty applications.
Electrical / Electronics
SHA 4190
Shakespeare Stainless Rail Mount ▪▪Ratchet action for quick and easy installation on to 1" to 1-1/2" railing ▪▪For antennas up to 8' in length ▪▪Standard 1''-14 thread. 9/32"' hole for cable feed SHA 4188SL
Shakespeare Economy Nylon Rail Mount Ratchet action for quick and easy installation on to 7/8''-1'' railing. Standard 1''-14 thread. SHA 4721
SHA 4364
4364
▪▪Heavy duty stainless steel extension masts ▪▪1"-14 thread male and female fittings SHA 4700 SHA 4700-1 SHA 4700-2
6" Extension 1' Extension 2' Extension 4700-1
4 foot moderate duty mast extension. Made from white polycarbonate fittings. Standard 1"-14 thread, upper male, lower female. ▪▪Actual length 50" SHA 498
▪▪4-1/2" stainless steel mast extension ▪▪Standard 1"-14 thread SHA 4006 498
Shakespeare Antenna Rail Mount Economy stainless steel rail mount. Comes with adaptors to fit 7/8", 1 & 1-1/4" vertical or horizontal rails. For use with standard 1"-14 thread antennas. Can also be mounted on flat surfaces. SHA 4720
Shakespeare Stand-Off Bracket Insulated standoff bracket made of white moulded plastic. Use on antennas of 1", 1-1/8" and 1-1/2" dia. Includes mounting hardware. SHA 408-R
Shakespeare Stainless Straight Mount 4" high, standard 1''-14 thread. Perfect for radar arches and can be used with a 4364 extension mast. Uses 1/4" fasteners. SHA 4365
Shakespeare Flange Mount Low profile, 1" high mount with standard 1"-14 threads. Great for GPS, marine TV and shorter antennas. SHA 4710 Stainless steel SHA 4711 Nylon
Shakespeare Tube Mount Slip on to a 1" diameter pipe for a 1"-14 thread male fitting. Can be used with any 1" O.D. stainless tubing. Attaches easily with set screws. SHA 4705
Shakespeare 2-1/4" External Speaker ▪▪Mylar cone in a compact white housing ▪▪4 ohm. speaker for input power of up to 5 watts (RMS) ▪▪Comes with a ratchet action mounting bracket, hardware mounting kit and six feet of cable with "mini phone" plug installed SHA ES-2
Shakespeare Deluxe 4” External Speaker ▪▪4 ohm, speaker with Mylar cone and white plastic cabinet ▪▪Maximum input power is 8 watts (RMS) ▪▪Comes with a swivel mounting bracket, hardware mounting kit and six feet of cable with “mini-phone” plug installed SHA ES-4
Shakespeare Hailer Speaker ▪▪5" external hailer speaker ▪▪White plastic horn speaker rated at 4 ohms ▪▪15 watts (RMS) input SHA HS-5
4006
99
SmartPlug
SmartPlug Boatside Retrofit Plug & Inlet Kits - 50A
SmartPlug Boatside Retrofit Plug & Inlet Kits - 30A
SMP B50ASSY*
BF50 & BM50S
SMP B30ASSY
BM30S
SmartPlug Connectors - 50A SmartPlug Systems simplified installation by using the existing 50 Amp inlet footprint on your boat. Adapters are available to make the connection between the SmartPlug and the old style plug trouble-free.
BF30
SmartPlug Connectors - 30A SmartPlug Systems simplified installation by using the existing 30 Amp inlet footprint on your boat. Adapters are available to make the connection between the SmartPlug and the old style plug trouble-free. SMP BF30 SMP BM30S
Boat side plug Boat inlet with S/S cover,
SMP A1001
Boat side plug cover
Accessories:
The SmartPlug 30 amp inlet and connector have passed all required testing for product safety certification by Intertek testing services and are now listed as ETL certified products. The ETL listed mark is proof of compliance with US & Canadian safety standards
SMP BF50* SMP BM50S*
Boat side plug Boat inlet with S/S cover
SMP A1001
Boat side plug cover
Accessories:
*Request Items
A10001
A10001
Electrical / Electronics
A safe alternative that is affordable to upgrade and easy to install. The development of the boat inlet and cordset for 30 Amp shore power makes connection between boat and shore power easy and intuitive. SmartPlug’s design protects against the common causes of marine fires and electrocution: loose connections and corrosion. The smart, innovative shape and function of the new shore power cordsets and inlets provide: ▪▪Overheat protection ▪▪Triple waterproof seal ▪▪No-twist connection ▪▪Double lock system ▪▪Straight pin configuration ▪▪Easy to change over
A safe alternative that is affordable to upgrade and easy to install. The development of the boat inlet and cordset for 50 amp shore power makes connection between boat and shore power easy and intuitive. SmartPlug’s design protects against the common causes of marine fires and electrocution: loose connections and corrosion. The smart, innovative shape and function of the new shore power cordsets and inlets provide: ▪▪Overheat protection ▪▪Triple waterproof seal ▪▪No-twist connection ▪▪Double lock system ▪▪Straight pin configuration ▪▪Easy to change over
100
Techflex
Electrical / Electronics
Techflex FLEXO PET (PT)
Techflex is a globally recognized specialist in the engineering and manufacture of the most advanced sleeving solutions and related products for the management and protection of wires, cables and hoses. ▪▪Fast installation ▪▪Long length capability ▪▪Extreme flexibility ▪▪Reduced volume ▪▪Light weight ▪▪Quick dissipation of moisture ▪▪Unbeatable great looks
Techflex F6 ▪▪A unique split, 10 mil PET semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance ▪▪ The lateral split (25% edge overlap) allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.) ▪▪ F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses ▪▪Allows for the addition or removal of wires without disassembly TFX F6N0.25BK TFX F6N0.50BK TFX F6N0.75BK TFX F6N1.00BK TFX F6N1.50BK TFX F6N2.00BK
1/4” x 100’ 1/2” x 75’ 3/4” x 50’ 1” x 50’ 1-1/2” x 25’ 2” x 25’
Techflex Installation Tools This simple tool makes installing long lengths of F6 sleeving a breeze. Just insert your bundle of wires into the shank of the tool and slide it along the split in the sleeving. TFX INN0.50OR TFX INN0.75OR TFX INN1.00OR TFX INN1.50OR
1/2” sleeve 3/4” sleeve 1” sleeve 1-1/2” sleeve
Techflex Heavy Wall (HW) ▪▪ HW is commonly used in industrial and marine applications where extreme abrasion protection is critical ▪▪The durability of HW makes it ideal for protecting hoses and cables that have constant contact with rough and abrasive surfaces ▪▪ HW is the perfect solution for use on chains and cables to protect painted or laminated surfaces from scuffing and wear TFX HWN0.38BK TFX HWN0.63BK TFX HWN1.00BK TFX HWN1.50BK TFX HWN2.00BK25 TFX HWN2.00BK
3/16” - 3/4” x 50’ 5/16” - 7/8” x 50’ 1/2” - 1-1/2” x 50’ 3/4” - 2” x 25’ 1-1/2 - 3” x 25’ 1-1/2 - 3” x 50’
▪▪ The unique braided construction and wide expandability allows quick and easy installation over large connectors and long runs ▪▪ PT is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns ▪▪The material has a wide operating temperature range, is resistant to chemical degradation, UV radiation, and abrasion ▪▪The sleeving cuts easily and cleanly with a hot knife TFX PTN0.25BK TFX PTN0.50BK TFX PTN0.75BK TFX PTN1.25BK TFX PTN1.50BK TFX PTN2.00BK
1/8” - 7/16” x 100’ 1/4” - 3/4” x 100’ 1/2” - 1-1/4” x 100’ 3/4” - 1-3/4” x 50’ 1” - 2-1/8” x 50’ 1-1/2 - 3-1/2” x 50’
Techflex Clean Cut ▪▪Same specifications as the PET sleeving with the advantage of being able to cut the material with ordinary scissors and still maintain an extraordinarily fray-resistant end without the addition of chemical binders or adhesives ▪▪Clean Cut's fray resistant properties allows frequent expansion of the cut end without unraveling ▪▪When cut with a hot knife, Clean Cut produces a clean, smooth and virtually frayless end ▪▪Clean Cut is braided for maximum coverage while still allowing enough expansion for easy installation TFX CCP0.50BK TFX CCP0.75BK TFX CCP1.00BK TFX CCP1.25BK TFX CCP1.50BK
Techflex Display Rack
1/4”-3/4” x 100’ 5/8”-1” x 75’ 3/4”-1-3/16” x 50’ 1”-1-1/2” x 50’ 1-1/4”-2” x 50’ Shown with product (not included)
This display/dispenser rack allows easy control of sleeving inventories and provides a controlled system of neatly dispensing directly from the spools. The rack is constructed from tough ABS plastic, with plenty of room for a wide range of products. Full visibility and access ensures easy management of inventory. Simple drop-in replacement for standard spools. ▪▪Wall or counter mountable ▪▪L: 23-1/2” x H: 6” x D: 10” TFX DSN0.00BK
Techflex
101
Cutting to Prevent Fraying
1
2
Measure the sleeving to length. Keep the sleeving relaxed and don’t pull it as you measure. The most accurate method is to measure the sleeving on the actual application. There will be some foreshortening of the sleeving as it expands over large bundles or connectors. Mark the cut line with a pen or marker.
When the knife is hot, slide the sleeving over the cutting blade. Practice on a piece of scrap to get a feel for the procedure. Always cut in a well ventilated area and avoid inhaling the fumes. Both the blade and the cut ends will be HOT. Be careful.
3
4
While the ends are still hot, use an inverted funnel (needle nose pliers or scissors also work well) to form the end into a soft flare. This will allow the sleeving to easily slide over your application and accommodate plugs or connectors without binding.
To install the sleeving over your application, just push the flared end over the ends of the wires and “walk” the sleeve down the length of the bundle from behind. Once the sleeving is in place, just run your hand over the applied sleeving to smooth it out.
The F6 Sleeving Tool If you have ever run wiring through split tubing you know that it can be frustrating. Without this tool, the more wires you have, the harder it is. When you have to add a wire, it can really slow you down.With this premium wire loom tool, you can add and remove wires quickly and easily. Simply gather the wires you want into the installation tool and then insert the tool and wires into any split tubing or semi-rigid sleeving like Flexo F6. Run the tool through the tubing, smooth it out with your hand and you are finished.
► Also See
Panther Hot Knife pg 213
Electrical / Electronics
Products displaying this icon should be cut with a hot knife, rope cutter or some other method for cutting and sealing the ends to prevent fraying during the installation and assembly process. We offer an assort-ment of tools to accomplish this, ranging from heavy duty, high volume devices to portable gas powered units.
Choose your lifeline carefully... All Models Feature: All US, Canadian and International Marine Channels,One-Touch Emergency Channels, Dual Watch and Triple Watch Memory Channel Scan
FLOATS!
Atlantis 290
Includes: AC & DC Adapters Charging Cradle AAA Battery Holder External SpeakerMicrophone Jack Belt Clip UPC: 050633501702
RATED
Atlantis 295
Dual Band VHF and GMRS JIS7/IPX7 Submersible Waterproof Level 10 Hour Battery Life, 7 Hour Charge Time 1/2.5/6W (VHF) Large Easy-to-Read Back-lit LCD Power Boost Key Glow Seals Vibration - GMRS only Designed to Float
FLOATS!
RATED
Dual Band VHF and GMRS JIS7/IPX7 Submersible Waterproof Level 10 Hour Battery Life, 7 Hour Charge Time 1/2.5/6W (VHF) Large Easy-to-Read Back-lit LCD Power Boost Key Glow Seals Vibration - GMRS only Designed to Float Includes: AC & DC Adapters Charging Cradle AAA Battery Holder External Speaker-Microphone Jack Belt Clip UPC: 050633501719
Atlantis 250 - Black Atlantis 250 - White Atlantis 270 NEW Floating Design 10 Hour Battery Life 1 / 2.5 / 6 watt Display Size: 18mm x 37mm Power Boost Key Glow Seals Designed to Float
FLOATS!
Includes: Belt Clip AC & DC Adapters Charging Cradle RATED
FLOATS!
Waterproof Large Back-lit Display Powerful 1350 mA NiMH Battery Alkaline Battery Capable 1W or 5W Transmit Power Includes: Car Charger Charging Cradle Alkaline Battery Tray Lanyard Swivel Belt Clip Antenna
UPC: 050633501634
UPC: 05063350095 8 (white) 05063350052 1 (black)
MHS126
MHS75
JIS8/IPX8 Submersible Floats Power Boost PTT Key Emergency Strobe Light Glow in the Dark Seals 1160mAh Li-Ion Battery Pack 11 Hours Battery Life 1W, 2.5W, or 6W Transmit Power WX/Emergency Alert Includes: AC Charge Cord, DC Charge Cord, Charging Cradle, Alkaline Battery Tray Swivel Belt Clip, Antenna and Lanyard UPC: 050633501573
Large Display JIS8 Submersible Up to 11 Hours Battery Life 1W, 2.5W, or 5W Transmit Power Includes: Clip-on DC Charger Swivel Belt Clip Lanyard Antenna UPC: 05063350125 2
Handheld Marine VHF Radios
MHS235 – Class D/DSC Radio FLOATS!
Advanced integrated GPS receiver JIS8/IPX8 Submersible Floats 1W, 2.5W, or 6W Transmit Power WX/Emergency Alert AUTO Plot to DSC Calls Received Add Favorite Locations, find that good fishing spot again
GPS Compass Power Boost PTT Key Emergency Strobe Light Glow in the Dark Power /PTT Keys/Seals 10 Hours Battery Life
Includes: AC Charge Cord DC Charge Cord Charging Cradle 1140mAh Li-Ion Battery Pack Accessory Battery Tray Speaker Microphone Swivel Belt Clip Antenna Lanyard UPC: 05063350153 5
Fixed Mount Marine VHF Radios All Models Feature:
UM380 - White UM380BK - Black
UM415 - White UM415BK - Black
Includes: Under Dash Mounting Hardware Microphone Bracket with Screws
Includes: Under Dash Mounting Hardware Microphone Bracket with Screws
UPC Numbers: 05063350141 2 (white) 05063350142 9 (black)
UPC Numbers: 05063350129 0 (white) 05063350130 6 (black)
Waterproof Large 0.9” x 1.8” Display Rubber Grip Microphone Shorter Chassis Design for Versatile Installation Rejection: 70 dB
JIS8 Submersible Large 1.2” x 2.2” Display Channel and Scan Controls on Microphone Channel Tags Rejection: 75 dB
©2015 Uniden America Corporation.
Class D Radio with Dedicated 2nd Receiver for Emergency Channels DSC Calling with Position Send, Request and Reply One Touch Emergency Channels on Radio and Microphone Automatic Distress Call NMEA Input and Output Automatic Channel Mode (US/International Canada) Display Based on GPS Coordinates All NOAA Weather Channels with Weather Alert Watch and S.A.M.E. 1W or 25W Transmit Power Receiver Performance Sensitivity: 0.27 µV Memory Channel Scan Dual and Triple Watch Dot Matrix Display Back-lit Display and Keypad Display Brightness and Contrast Control GPS Accessory Compatible
104
Uniden
Electrical / Electronics
▪▪Class D 2nd reciever dedicated to emergency channel ▪▪Add up to 100 FAVOURITE locations ▪▪GPS with compass ▪▪Auto pilot to DCS distress call ▪▪Emergency STROBE light/flashlight ▪▪Waterproof JIS8 / Floating ▪▪Power Boost key to 6 watts ▪▪Water temperature meter ▪▪Speaker mic included ▪▪AC and DC chargers ▪▪3 year warranty UNI MHS-235
Uniden MHS-126 VHF Radio ▪▪JIS8/IPX8 submersible ▪▪Power boost PTT key ▪▪Emergency strobe light ▪▪Glow in the dark Power/PTT keys ▪▪1160mAh Li-lon battery pack ▪▪1W, 2.5W, or 8W transmit power ▪▪WX/Emergency alert ▪▪Includes alkaline battery tray ▪▪Slim comfortable grip ▪▪3 year warranty UNI MHS-126
Uniden MHS-75 VHF Radio ▪▪Compact design ▪▪JIS8 submersible ▪▪Dual/triple/quad watch ▪▪Memory channel scan ▪▪Weather alert ▪▪Variable power (1, 2.5, 3 watt) ▪▪DC clip-on charger ▪▪Runs 11 hours on rechargeable lithium ion battery (included) ▪▪W: 2.5" x H: 9.25" x D: 1.75" ▪▪3 year warranty UNI MHS-75
Accessories:
UNI MHS75DC UNI BADG1100-001*
* Request Item
DC adaptor AC Adapter
UNI ATLANTIS-290 Black UNI ATLANTIS-295 Camouflage
Uniden Atlantis-270 VHF Radio The Atlantis 270 features all NOAA emergency weather channels, as well as all USA, International, and Canadian marine channels. Meets IPX7 submersible waterproof standards. Brilliant backlit LCD display makes it easy to use day or night for the power to go anywhere. ▪▪Floating design ▪▪10-Hour battery life ▪▪1/2.5/6 watt transmit power ▪▪Display size: 18mm x 37mm ▪▪Power boost key ▪▪AC & DC adapters ▪▪Included charging cradle ▪▪Glow seals ▪▪Memory scan ▪▪One touch channel 16/9 key ▪▪Power key ▪▪Size (no antenna): H: 5.35" x W: 2.44" x D:1.53" ▪▪Weight (with battery): 8.46 oz ▪▪3 year warranty UNI ATLANTIS-270 Black
W E
Uniden MHS-235 VHF Radio
▪▪Dual Band VHF and GMRS ▪▪JIS7/IPX7 Submersible waterproof level ▪▪10 hour battery life, 7 hour charge time ▪▪1/2.5/6W (VHF) ▪▪Large Easy-to-Read back-lit LCD ▪▪Power boost key ▪▪Glow seals ▪▪Vibration - GMRS only ▪▪Designed to float Includes: ▪▪AC & DC adapters ▪▪Charging cradle ▪▪AAA battery holder ▪▪External speaker-microphone jack ▪▪Belt clip
N
Uniden Atlantis-290 VHF Radios
Uniden
105
Uniden Atlantis-250 VHF Radios
UNI ATLANTIS-250G Grey UNI ATLANTIS250BK Black
Accessories:
UNI SM81* UNI BATY0467-001* UNI BADG1056-001
* Request Items
Speaker microphone Antenna, Black AC adapter, Black
Uniden Atlantis-200 VHF Radio ▪▪Rugged polycarbonate case ▪▪6 AAA 1350 mAh NiMh battery ▪▪Alkaline battery capable ▪▪10 hours battery life ▪▪Waterproof JIS4 ▪▪1 /5 watt TX ▪▪NOAA weather alert ▪▪Headset jack ▪▪AC & DC chargers ▪▪3 year warranty UNI ATLANTIS-200
Uniden Solara D UM-380 VHF Radios ▪▪Class-D DSC ▪▪All USA, Canadian and international marine channels ▪▪N.O.A.A. weather channels ▪▪Orange backlit displayand keys for enhanced night vision ▪▪Submersible - meets the JIS7 standards (1 meter for 30 minutes) ▪▪Memory channel scan ▪▪NMEA input/output ▪▪1/25 watt output ▪▪H: 2.95" x W: 6.57" x D: 5.08" ▪▪3 year warranty UNI UM-380 White UNI UM-380BK Black
Accessories:
UNI FMB-321 UNI FMB-322B UNI FMB-322W
Flush mount kit, stainless hardware Flush mount kit, faceplate, Black Flush mount kit, faceplate, White
Uniden Oceanus D UM-415 VHF Radios ▪▪Class-D DSC ▪▪Rugged speaker microphone with channel, up/down, scan and 16/9 keys ▪▪All USA, Canadian and international marine channels ▪▪S.A.M.E. emergency/weather alert ▪▪1/25 watt transmit power ▪▪Easy-to-use intuitive menus in full dot matrix display ▪▪Large backlit display for enhanced night vision ▪▪Programmable channel scan means you never miss a call ▪▪10 weather channels ▪▪NMEA input/output ▪▪External speaker capable (4 ohm) ▪▪W: 6.25" x H: 2.5" x D: 6.0" ▪▪3 year warranty UNI UM-415 White UNI UM-415-BK Black
Accessories:
UNI FMB-321 UNI FMB-322B UNI FMB-322W
Flush mount kit, stainless hardware Flush mount kit, faceplate, Black Flush mount kit, faceplate, White
Uniden PRO 510-XL CB Radio ▪▪Compact professional CB radio ▪▪LED channel display ▪▪Automatic noise limiter ▪▪4 Segment LED S/RF meter ▪▪Adjustable squelch & volume ▪▪W: 12” x H: 6” x D: 4” UNI PRO 510-XL
► Also See
Antennas pg 94
Electrical / Electronics
▪▪USA/International & Canadian marine channels ▪▪JIS4/CFR46 waterproof level ▪▪1/5 watt switchable ▪▪Ni-MH and alkaline battery capability ▪▪Instant channel 16/9/Triple watch ▪▪Back lit L.C.D. display & key pad ▪▪N.O.A.A. weather channels with weather alert ▪▪Memory channel scan ▪▪Comes complete with AC/DC charger ▪▪W: 2.75" x H: 11" x D: 1.875" ▪▪3 year warranty
Cruise longer, pump out less with VacuFlush® toilet systems.
RTE ER AR AT SM S W AT ES BO SH L U FL
Attention Captains & Owners
Powerful vacuum flushing uses a fraction of the water required by other electric marine toilets. All-ceramic electronic-flush VacuFlush toilets n 0.3 liter per flush at “low” setting; just under 1 liter per flush at “normal” setting n Elegant styling complements wide range of interiors n Ergonomic design for home-like comfort
VF 4800 Series
VF 4700 Series
VF 4600 Series
© 2015 Dometic Corporation
Foot-pedal VacuFlush toilets n 0.4 liter per flush during normal operation n Range of styles and colors to fit many head layouts and interiors n Larger seats, deeper bowls deliver better comfort than most marine toilets
Remotely tucked away in the bilge is the quiet vacuum generator of a VacuFlush system. After each flush, it creates a vacuum reserve so powerful that, when the toilet is later flushed, the bowl instantly clears of all effluent. JW Vacuum Generator
Complete Toilet System Accessories and Convenience Products from Dometic - the Leader in Marine Toilets n Holding tanks n Sanitation hoses n Vent filters
n Tank monitors n Tank treatments n Discharge pumps n Toilet bowl cleaner n Marine toilet paper
Get the details – including videos www.dometicsanitation.com
VF 140 Series VF 5000 Series
VF 500 Series
Appliances / Sanitation
107
DICKINSON
108
DOMETIC
109
EVA-DRY
111
MAGMA
112
NOVA KOOL
120
SEAWARD
124
SEALAND / VACUFLUSH
126
VIKING PROPANE TANKS
135
WEBASTO
136
108
Dickinson Dickinson Accessories
Dickinson Sea-B-Que Grills
Appliances / Sanitation
S/S propane marine barbecue/oven. Nonstick, no-flare cooking surface, removable drip tray and deck legs. Roll away hood.
* Request Item
DIC 00-SBQL
DIC 00-SBQS
Dickinson Spitfire Grill ▪▪20 ga. S/S mirror finished top with a grain finished bottom ▪▪Front and side cool touch handles ▪▪Electronic ignition ▪▪Thermometer ▪▪Top rack for grilling perfection ▪▪1/4” rod grills ▪▪Removable drip tray ▪▪Includes black vinyl cover ▪▪Three year warranty on burners ▪▪11,000 BTU of wind proof grilling ▪▪24” W (Overall) x 13” H x 14.75” D DIC 00-SPT-180
DIC 15-187 DIC 15-150A DIC 15-150F DIC 15-150P
SBQ Small SBQ Large SBQ Round Aussie grill, S/S for SPT 180-G
DIC 15-080 DIC 15-184 DIC 15-182P DIC 15-182S DIC 15-183P DIC 15-183S DIC 15-061 DIC 15-060 DIC 15-110 DIC 15-120 DIC 15-130 DIC 15-189
Drip tray for small/large SEA-B-QUE Large SEA-B-QUE cover *Small porcelain grill section *Small S/S grill section *Large porcelain grill section *Large S/S grill section Replacement burner – small Replacement burner – large Regulator w/knob Universal BBQ thermometer Hood knob, black plastic 8ft propane hose
*Small & large BBQ's require 4 sections for a complete grill
Dickinson Radex Heater Utilizes waste water heat produced by a water cooled engine or any circulating hot water source to generate forced air heat. Stainless steel construction. Self contained unit includes a single high efficiency 12V fan and rocker switch. Flush mount frame or side mount brackets sold separately. Rear exit fitting: 3/4” O.D. copper tubing. ▪▪12,000 BTU ▪▪W: 10-3/8” x H: 7” x D: 5” DIC 00-RAD-1*
15-150A
* Request Item
15-150P
Taft mount for wooden railings Horizontal/vertical rail mount 7/8”-1” Rod holder mount adapter ‘Scotty’ rod holder mount adapter
Dickinson Pedestal Mount The perfect way for you to mount your Sea-B-Que or Spitfire grill in locations such as a deck, or patio, boat, swim platform or pontoon boat. Features the quick release latch for easy removal and storage. ▪▪Screw threaded 5” base plate ▪▪Height: 28” ▪▪Grill height: 30” DIC 15-150B
15-184
Dickinson Accessories
Small ▪▪10,000 BTU ▪▪Cooking surface: 16” x 9-1/4” (148 sq. in.) ▪▪Overall: W: 24-1/4” x D: 10” x H: 12-3/8” ▪▪Weight: 18 lbs
Dickinson Mounts
Large Sea-B-Que cover Small Sea-B-Que cover Small food/drink tray Large food/drink tray
“Aussie Style” Griddle Pans DIC 15-200 DIC 15-201 DIC 15-202* DIC 15-203
Large ▪▪11,000 BTU ▪▪Cooking surface: 19-3/4” x 11-1/5” (227 sq. in.) ▪▪Overall: W: 28" x D: 12-1/4" x H: 14-1/2" ▪▪Weight: 30 lbs
15-187
DIC 15-184 DIC 15-185 DIC 15-180 DIC 15-181
15-150F
Dickinson Newport Propane Fireplace Ideal for boats up to 30/32 ft. The combustion process is completely isolated from the inside of the boat by the unique, direct vent design. A built-in blower provides good heat circulation. Heater is sold with all accessories including a stainless steel backing plate and 28” of flexible, double stainless chimney. ▪▪Safe direct venting ▪▪Safe manual ignition ▪▪Blower fan included DIC 00-NEW-P9000 Width.................8-1/2” / 21.6 cm Depth.................5-1/2” / 13.75 cm Height................14” / 35 cm Weight...............15 lbs / 6.82 kg Flue Size...........3” / 7.6 cm Material..............Stainless steel body Voltage..............12 (0.17 amps) Fuel...................Propane Heat Output.......Low 5,500 BTU (fan on) ..........................High 7,500 BTU (fan on)
Dometic
109
W E
N
DuraSea Rooftop Air-Cooled Air Conditioner Drop-In Cooling Unit That Requires No Plumbing or Ducting
The DuraSea Rooftop is a 15,000 BTU/hr air conditioner built to endure harsh marine environments. Ideal for patrol boats, house boats, and other vessels, it is designed to be installed on a flat deck or rooftop and cool the area directly below. It is air cooled and requires no plumbing or ducting. The air-distribution box (ADB), sold separately, attaches to the underside of the unit. Accessible from the interior cabin, the ADB contains the thermostat, fan controls, return-air vent and two supply-air vents that blow in opposite directions for increased cooling capability. The three-speed blower works in cooling and ventilation-only modes. Both the condenser and evaporator coils are coated using the ElectroFin E-coat process which provides superior resistance to salt-air corrosion and UV damage when compared to spray coating. E-coat employs electrically charged molecules to coat the components for complete and uniform coverage with no material bridging between the fins. The E-coat material was salt-spray tested for 5,000 hours, not 1,000 like competing units. In addition, the condenser and evaporator fans are also corrosion resistant and will not rust. Unlike the competition, we use oversize coils for improved performance and dehumidification. Rugged and strong, the DuraSea Rooftop weighs only 103 lbs. (46.7 kg). The heavy-duty reinforcement plate ties the evaporator and condenser together to minimize vibration and movement. A vibration-isolating L-bracket on the compressor and fan motor is incorporated for additional stabilization. Rubber clamps and bushings further control noise and vibration. The powder-coated base pan is 15% thicker than other models. DOE 489516AXX1C0* Rooftop unit, Polar white
Parts:
DOE 3107206.017*
Air distribution kit (ADB), Polar white
Accessories:
DOE 3101121.03*
* Request Items
Heater kit The air distribution box (3107206.017) (sold separately) mounts on the ceiling to provide A/C controls.
Compressor is bracketed at top as well as bottom to minimize vibration and movement while under way.
Weather-tight fan motor and bearings with a stainless steel shaft.
■ Air-cooled unit designed for rooftop or deckmount installation ■ No plumbing or ducting required ■ Provides 15,000 BTU/hr of cooling ■ Rugged and strong, yet lightweight ■ High efficiency, low power consumption ■ ElectroFin® E-coat process for superior resistance to corrosion and UV damage ■ Vibration-free operation ■ Compressor stabilization to endure extreme motion ■ Three-speed high-performance fan for cooling and ventilation ■ Sealed motor and bearings ■ Stainless-steel fan-motor shaft ■ Oversize coils for better performance and dehumidification ■ Environmentally safe R-410A refrigerant ■ Air distribution box (sold separately) includes mechanical control and interior panel ■ Optional electric heat Capacity (BTU/hr) Voltage/Cycle
15,000 115V/60Hz
Run Amps
15.3
Locked Rotor Amps (LRA)
66.0
Refrigerant Type
R-410A
Net Weight (lbs/kg)
103/46.7
Appliances / Sanitation
Key Feaatures
110
Dometic
W E
N
ENVIROCOMFORT R-410A AIR CONDITIONING KITS
Appliances / Sanitation
Climate Control at the Touch of a Button Enjoy ideal temperatures on your boat year-round with EnviroComfort (ECD) self-contained air conditioning kits - now available with R-410A refrigerant, an environmentally safe gas. ECD kits are available in 6,000, 10,000, and 16,000 BTU/ hr cooling and reverse-cycle heating capacities, so you can size the system to suit your boat for ultimate comfort in a range of climates. All units have high-velocity blowers with internal motors for a more compact installation footprint. The blower can be rotated to a horizontal or vertical position for greater installation flexibility. Units are built on an easy-to-plumb stainlesssteel drain pan, and the pre-installed return-air filter is removable for cleaning. ECD units are operated by a compact digital display/control that features a bright green LED display and large buttons. For added installation convenience, the plastic electrical box can be mounted remotely. ECD kits are ideal for replacing an air conditioning system or for a completely new air conditioning installation. The Retrofit Kit (shown above), which includes the ECD unit and digital control, is designed to replace an old self-contained unit and control. The ECD 6,000 BTU/hr unit will replace a 5,000 to 7,000 BTU/hr unit; the 10,000 BTU/hr unit will replace an 8,000 to 11,000 BTU/hr unit; and the 16,000 BTU/hr unit will replace a 12,000 to 16,000 BTU/hr unit. The Installation Kit includes all air distribution and plumbing components that, when combined with the Retrofit Kit, comprise a completely new air conditioning system installation for treating one interior space. If treating a second space is desired, add the Dual Duct Kit, which includes a “Y” connector, 12.5 ft. (3.8 m) of 4 in. (102 mm) of flexible insulated duct, and a circular supply air grille.
Air Conditioners Voltage/Cycle (Hz)/Phase
EDC6 6000BTU
EDC10 10000BTU
EDC16 16000BTU
DOE 207500306
DOE 207500310
DOE 207500316
115/60/1
115/60/1
115/60/1
Full Load Amps (FLA) Coo
4.6
6.7
10.4
Full Load Amps (FLA) Heat
5.9
8.8
13.6
Locked Rotor Amps (LRA)
36.0
42.0
62.0
R-410A
R-410A
R-410A
Compact Digital
Compact Digital
Compact Digital
Height (in/mm)(1)
11.25/286
13.25/337
13.50/343
Width (in/mm)
16.0/406
20.0/508
20.0/508
Min. Depth (in/mm)
8.00/203
8.75/222
10.25/260
Max. Depth (in/mm)
9.00/229
9.63/245
11.25/286
Min. Supply Duct Size (in/mm)
4.00/102
6.00/155
6.00/155
Seawater Connection Size (in/mm)
0.63/16
0.63/16
0.63/16
Net Weight (lbs/kg)(2)
39.0/17.7
58.0/26.3
64.0/29.0
Gross Weight (lbs/kg)
49.0/22.2
68.0/30.8
74.0/33.6
Elec. Box Height (in/mm)
8.75/222
8.75/222
8.75/222
Elec. Box Width (in/mm)
6.50/165
6.50/165
6.50/165
Elec. Box Depth (in/mm)
2.77/70
2.77/70
2.77/70
Refrigerant Type Control Type
Instalation kit #
DOE 218000106
DOE 218000110
DOE 218000116
Dual duct kit#
DOE 226600094
DOE 226600092
DOE 226600092
Key Benefits ■ High velocity, rotatable blower for horizontal or vertical installation ■ Environmentally safe R-410A refrigerant ■ Compact Dometic digital display/ control ■ Plastic remote electrical box for convenience in mounting ■ Stainless-steel drain pan ■ Pre-installed return-air filter, easily removable and cleanable ■ Small, compact, space-saving design ■ Retrofit Kit includes digital control and replaces an existing self-contained air conditioning unit ■ Optional Dual Duct Kit for air conditioning an additional interior space
Installation Kit
Dual Duct Kit
Dometic / Eva-Dry Dometic
111
Eva-Dry
W E
N
Dometic Portable Air Purifiers
Eva-Dry Renewable Dehumidifier
Reduce the odors of tobacco smoke, mildew, mustiness, chemical vapors and toilets, and inhale fresher, cleaner, healthier air.
DOE 4210805 Unit
* Request Item
500 cubic feet
Eva-Dry Electric (AC) Dehumidifiers ▪▪Powerful, quiet and efficient ▪▪High capacity dehumidifiers uses thermal electric Peltier technology; no compressor ▪▪Removable water tank ▪▪Auto cut-off with LED indicator ▪▪110V ▪▪1 year limited warranty ▪▪Water Tank Capacity: 16 oz ▪▪6” L x 4 1/2” W x 8 /12” H ▪▪Weight: 3.5 lbs
Parts:
DOE 4210804*
EVA E-500
Replacement lamp
EVA EDV-1100
1100 cubic feet
▪▪Water Tank Capacity: 2 liters ▪▪6 3/4” L x 8 1/2” W x 14” H ▪▪Weight: 7.6 lbs EVA EDV-2200
Dometic Portable Ice Makers The ice maker has an energy saving clear window in the lid which lets you check the ice level without losing cold. A simple ice cube size selection makes you chose from small, large cubes. ▪▪Stainless steel finish with black lid ▪▪Makes ice in under 15 minutes ▪▪Easy to use front LED display ▪▪UL approved ▪▪Strong recessed handles ▪▪1-year Protection Plus Warranty ▪▪6 foot power cord DOE HZB 12SA DOE HZB 15S
HZB 12SA
HZB 15S
Capacity
26 lbs/hour
33 lbs/hour
Dimensions
W:9.5” x D:13” x H:14”
W:15 x D:17” x H:17”
Voltage/Frequency
120V/60HZ/2.4A /(Hz)60
2200 cubic feet
Appliances / Sanitation
Breathe Easy Air Purifiers use innovative Photocatalytic Nano-Mesh technology with ultraviolet (UV) light to improve air quality. The UV bulb inside uses a specific frequency of light that produces no harmful ozone. ▪▪Built-in fan moves air through unit ▪▪Cleaner air may lessen allergy and asthma symptoms ▪▪Up to 96% reduction in volatile organic compounds (VOCs) ▪▪Up to 99.9% reduction in bacteria, fungi, mold, and pollen grains ▪▪Photocatalytic Nano-Mesh structure is safe, powerful and does not degrade under intense UV light ▪▪UV bulb is easy to replace ▪▪Effective in areas up to 500 sq. ft. (46 sq. m) ▪▪Worldwide AC power adapter with plugs and 12V DC power plug included ▪▪W: 6.25" x D: 4.5" x H: 1.75"
▪▪No more disposable crystals ▪▪Safe, non-toxic, natural defense against moisture and mildew ▪▪Requires no batteries or cords for use ▪▪Lasts 30-60 days before renewing (12-16 hrs with an AC outlet) ▪▪100% renewable, works up to ten years ▪▪Spill and mess-free; non-toxic ▪▪Child and pet safe ▪▪L: 8” x W: 2-1/2” x H: 5-1/2”
The World’s Most Popular Marine Grills
N EW
Gourmet SerieS 2 GrillS Grills Designed, Built, And Tested By Boaters For Boaters
marine Kettle-2® Combination Stove & Gas Grill
NESTING COOKWARE
SERVING SHELVES
WIDE SELECTION OF MOUNTS
www.magmaproducts.com
CARRY CASES
Magma
Gourmet Series 2 Grills
113
COMPLETELY REDESIGNED
CLASSIC Appliances / Sanitation
OR
NEW Gourmet Series 2 Features:
INFRARED
▪▪Rolled edge construction is safer and elegant ▪▪Glass viewing port on the infrared models ▪▪Dynamic combustion system stays lit in breezy conditions ▪▪Electronic ignition, lights first time every time ▪▪ Full size inner safety shell ▪▪ Reliable piezo crystal ignition ▪▪ Easy-to-read all S/S hermetically sealed thermometer ▪▪ 100% 18-9 mirror polished stainless steel ▪▪ Convenient snap-out dual radiant plate ▪▪ Large cooking grill ▪▪ Oversized perfectly balanced lockable lid ▪▪ Full-length handle ▪▪ Front access, lock-in place grease tray ▪▪ Swivelling valve regulator ▪▪ Fold-Away legs
Shown with optional mount & serving shelf (sold separately)
GOURMET SERIES
▪▪9” x 18” cooking grill ▪▪Grilling area: 162 sq. in. MGP A10-918-2-CSA MGP A10-918-2GS-CSA Infrared
W
Magma Newport Series 2
E
GOURMET SERIES
N
Shown with optional mount & serving shelf (sold separately)
Magma Catalina Series 2 ▪▪12" x 18" cooking grill ▪▪Large upper grill, for slow grilling or for warming food such as vegetables or bread ▪▪Easy-to-read all stainless steel hermetically sealed thermometer ▪▪Grilling area: 315 sq. in. Primary: 12” x 18” Secondary: 5-1/2” x 18” MGP A10-1218-2-CSA MGP A10-1218-2GS-CSA Infrared
Parts:
MGP 10-1056C MGP 10-1056L MGP 10-1056R
Centre, infrared anti-flare screen Left, infrared anti-flare screen Right, infrared anti-flare screen
W
E
N
Magma offers the largest selection of mounting options and accessories to customize your grill to your boat.
114
Magma Magma Rectangular Grill Mounts Connoisseur Series Features:
Magma Round Rail Mount
▪▪ Inner Safety Shell ▪▪ 100% 18-9 mirror polished stainless steel ▪▪ Convenient snap-out radiant plate ▪▪ Oversized perfectly balanced lockable lid ▪▪ Full-length handle ▪▪ Front access, lock-in-place grease tray ▪▪ Swivelling valve/regulator ▪▪ Fold-away legs
▪▪Extremely strong and features 2-way adjustment for horizontal levelling ▪▪Quickly detaches without tools ▪▪Leaves no hardware on the rail MGP T10-380
Magma Dual Rail Mounts
Appliances / Sanitation
Magma offers the largest selection of mounting options and accessories to customize your grill to your boat.
▪▪Incredibly strong and rigid, will not slip on the rail ▪▪A unique pivoting design which allows them to attach to curved rails or across the corner of a stern rail
CONNOISSEUR SERIES
Magma TrailMate
MGP T10-580 MGP T10-585
▪▪Small compact and powerful ▪▪Fold-away legs ▪▪Front access, lock-in-place grease tray ▪▪Grilling area: 108 sq. in. Primary: 9” x 12”
▪▪Allows mounting of Gourmet Series Grills out over the water ▪▪The quick-disconnect system allows quick disassembly leaving no hardware on the rail
CONNOISSEUR SERIES
Magma ChefsMate
MGP T10-680 1" round rail MGP T10-685 1-1/4" round rail
▪▪Wind tested for even heat distribution ▪▪Fold-away legs for that quick picnic on shore ▪▪Front access, lock-in-place grease tray ▪▪Grilling area: 162 sq. in. Primary: 9" x 18"
* Request Item
Magma Dual Bulkhead or Rail Mount
MGP A10-803-CSA
▪▪Attaches to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides ▪▪Horizontal rails up to 2-1/4” high by any depth ▪▪Vertical rails up to 1- 5/8” wide by any depth ▪▪Some fasteners required for installation
Adventure Series Features: ▪▪ Fold-Away legs ▪▪ 100% mirror polished stainless steel ▪▪ Heat resistant all weather plastic handle ▪▪ Snap-out radiant plate ▪▪ Oversized, balanced, lockable lid ▪▪ Swiveling control valve/ regulator ▪▪ Locking grease tray accessible from either side
MGP T10-540
Bulkhead, square or flat rail
Magma Dual Extended Square Rail Mount
Magma offers the largest selection of mounting options and accessories to customize your grill to your boat.
E
N W
Magma CABO
7/8” or 1” round rail 1-1/8" or 1-1/4" round rail
Magma Dual Extended Rail Mounts
MGP A10-801-CSA
ADVENTURE SERIES
7/8" or 1" round rail
▪▪Attaches to square or flat rails ▪▪Can also attach to any flat vertical surface such as bulkheads, gunnels, transoms, or cabin sides ▪▪Some fasteners required for complete installation MGP T10-640
Rails up to 2-1/4" high
▪▪Stainless steel construction for lasting beauty and superior corrosion resistance ▪▪Durable heat resistant all weather plastic handle with air cooled supports ▪▪Snap-out radiant plate, allows quick, easy clean-up and perfect even heat distribution ▪▪Lid won’t slam shut and features a draw tight latch which secures all inner components for transport ▪▪Grilling area: 162 sq. in.
Magma Dual Extended Square Rail Mount
MGP A10-703-CSA
MGP T10-641
▪▪Attaches to square or flat rails ▪▪Can also attach to any flat vertical surface such as bulkheads, gunnels, transoms, or cabin sides ▪▪Some fasteners required for complete installation Rails up to 4-1/8" high
Magma
115
Magma Marine Kettle 2 Combination Stove & Gas Grill
▪▪Highly adjustable mount ▪▪Strong, corrosion resistant, and versatile NOTE: The "New Style" LeveLock, T10355 is compatible with both the Bait/Filet Mate Tables and the new Tournament Series Cleaning Stations
▪▪Burner & hi-tech radiant plate & dome heat distribution design: Allows use as a grill, stove or oven ▪▪Swivelling, windproof turbo venturi & control valve design: Virtually eliminates blow-outs. Places the fuel & valve where it is convenient to you. ▪▪Hinged lid: Balanced lid will not slam shut ▪▪Reliable Piezo Igniter: Dependable push button lighting ▪▪“Stay Cool” handle with air cooled supports: Cast 18-9 Stainless ▪▪Cast 18-9 stainless L-bracket mount clamp: Indexed for positive non-slip level mounting ▪▪Fully double lined stainless inner safety shell: Cooler for safety. ▪▪Magma’s patented design utilizes convection cooking: Gives the hottest temperature with the least amount of fuel. ▪▪9.5 lbs ▪▪Grilling Area: 15” diameter
MGP T10-355
Magma Pow'rGrip/LeveLock Rod Holder Mount Mount adjusts and locks in place at both ends by joining the "LeveLock" adjustable fish rod holder mount, with the "Pow'rGrip" adjustable fish rod holder mount. This allows the "Pow'rGrip" portion of the mount to adjust to any size rod holder and lock in place, while the "LeveLock" portion of the mount, adjusts and locks your Magma rectangular grill. MGP T10-375
MGP A10-207-CSA Original size
▪▪11.8 lbs ▪▪Grilling Area: 17” diameter MGP A10-217-CSA Party size
Magma Flush Deck Socket Mount ▪▪Push button lock pin and includes a flange gasket with integral flip-up water seal cap ▪▪Some fasteners required for complete installation MGP T10-326
Magma Dual Flush Deck Socket Mount ▪▪Push button lock pin to allow use while underway ▪▪Includes a flange gasket with integral flip-up water seal cap ▪▪Some fasteners required for complete installation MGP T10-526 All Magma Gas Grills use standard disposable 1-lb. propane canisters or adapt to on-board LPG (propane) or CNG (natural gas) systems
Magma Kettle Mounts Magma Round Rail Mount ▪▪Quick-disconnect, all angle mounting ▪▪Fits any angle railing and detaches quickly for storage without tools leaving no hardware on the rail MGP A10-080
7/8” or 1” round rail
Magma Scotty Rod Holder Mount ▪▪Fit the popular Scotty mounts ▪▪Allows the “Marine Kettle” to be locked in 12 different positions ▪▪Quickly disconnects for easy storage without tools ▪▪Rod holder socket not included MGP A10-165
Scotty mount
Magma Pow'r Grip Rod Holder Mount ▪▪Fits most cylindrical type rod holders ▪▪Allows grills to mount in any direction from the rod holder ▪▪Rod holder socket not included MGP A10-175
Magma Flush Deck Socket Mount ▪▪Stainless detent pin lets the grill rotate and lock in 8 different positions allowing it to be moved inboard and outboard ▪▪Mount includes a raincap ▪▪Rod portion of mount quickly disconnects for compact storage ▪▪Some fasteners required for installation MGP A10-126
Appliances / Sanitation
Magma LeveLock Rod Holder Mount
Appliances / Sanitation
116
Magma
Magma Pedestal Mount
Magma Grill Covers
▪▪There is no need to cut a hole in your deck ▪▪Durable anodized aluminum with a brushed satin finish ▪▪Pedestal locks into the mounting base and the grill or table locks to the pedestal ▪▪Grill or table is instantly removable from the pedestal with a simple push-button release ▪▪Pedestal also is instantly removable from the mounting base with a push-bottom release that allows the pedestal to be unthreaded and removed for storage ▪▪The low-profile, threaded twist-lock surface mount base measure just 5/8” tall and 7’ in diameter with a 5-3/4” bolt pattern ▪▪Made of durable anodized aluminum with a brushed satin finish ▪▪Height: 28”
▪▪Water and fade resistant Sunbrella boat cover material resists damage from sunlight and mildew ▪▪5 year warranty covers the fabric becoming unserviceable because of loss of colour or strength from normal exposure conditions, including sunlight, mildew, rot and atmospheric chemicals ▪▪1 year warranty on all other components
MGP T10-185
Magma Pedestal Adapter
Gourmet & Connoisseur Series MGP A10-890JB MGP A10-990CN MGP A10-990RB MGP A10-990JB MGP A10-990PB MGP A10-1290JB MGP A10-1290RB MGP A10-1291JB MGP A10-1291RB
Trailmate, Jet Black Newport/Chefmate, Captain’s Navy Newport/Chefmate, Royal Blue Newport/Chefmate, Jet Black Newport/Chefmate, Pacific Blue Catalina, Jet Black Catalina, Royal Blue Monterey, Jet Black Monterey, Royal Blue
Required when mounting Magma rectangular grills to non Magma pedestal mounts (Todd, Garelick, Springfield) MGP T10-180
Magma Serving Shelves with Removable Cutting Board ▪▪18-8 stainless steel detachable serving shelf with UV stabilized high-density, FDA approved polyethylene ▪▪Attaches and detaches instantly for quick and easy clean-up or storage ▪▪Stores inside of grill when not in use MGP A10-901 MGP A10-902
12” (for Trailmate) 17-1/4” (All rectangular grills except Trailmate)
Magma Storage Bag ▪▪Safe, convenient and essential for boats without approved propane or butane gas storage lockers ▪▪Stows 3 disposable butane or propane canisters safely out-over-the-water ▪▪Made of water and fade resistant heavy duty nautical blue polyester boat cover material ▪▪Has heavy nylon adjustable straps with snap connectors for attaching to a horizontal rail or lifeline MGP A10-210PB
Marine Kettle Series MGP A10-191JB MGP A10-191RB MGP A10-492JB MGP A10-492RB
Original size, Jet Black Original size, Royal Blue Party size, Jet Black Party size, Royal Blue
Magma Padded Grill & Accessory Carry Cases ▪▪Outfitted with a large storage compartment for a grill, pockets for storing a serving shelf, griddle, fish/ veggie tray ▪▪Includes an additional side pocket for storing up to (2) 1lb. propane canisters and (2) control valve/ regulators ▪▪Thick padding and heavy duty carrying handles and strap MGP A10-992 MGP A10-1292 MGP A10-1293
For grills maximum 9” x 18” For grills maximum 12” x 18” For grills maximum 12” x 24”
Magma Padded Kettle & Accessory Carry Case ▪▪Fits most portable kettle grills 17” and under ▪▪100% polyester fabric with thick padding for maximum protection ▪▪Heavy-duty zippers ▪▪Transports and stores grill, mounts, and grilling accessories ▪▪Large main compartment for grill ▪▪Additional storage pockets for griddle, fish and veggie grill tray, grill tools, control valve/regulators, and disposable 1 lb.fuel canisters MGP A10-991
Magma "Nesting" Cookware Sets:
▪▪ 100% 18-9 mirror polished marine grade stainless steel ▪▪ Store in less than 1/2 cubic foot of cabinet space ▪▪ Locking removable handle for sauté and sauce pans ▪▪ Sealed triple clad bottoms, for even heat distribution ▪▪ Secures for storage with a provided “bungee” cord ▪▪ Oven friendly and dishwasher safe
117
Magma Nesting Stainless Steel Colander ▪▪100% 18-10 stainless steel ▪▪Use with any Magma 5qt stock pot for preparing pastas or steaming vegetables ▪▪Nests in all Magma cookware sets for convenient storage ▪▪Collapsible easy-use stainless steel handle MGP A10-367
Magma 10 Piece Stainless Steel Appliances / Sanitation
▪▪5Qt. stock pot, 10-1/4” x 4-3/8” ▪▪10” saute/ fry pan ▪▪3Qt. sauce pan ▪▪2Qt. sauce pan ▪▪1-1/2Qt. sauce pan ▪▪Lid for stock pot and saute/ fry pan ▪▪Universal lid for sauce pans ▪▪2 removable handles ▪▪Bungee storage cord
Magma Non-Stick Griddles ▪▪Constructed entirely of cast 400 Series aluminum ▪▪Heavy Duty “Non-Stick” coating ▪▪Reversible; griddle side or grill side ▪▪Grill: deep channels keep grease away from cooking area ▪▪Griddle: high tapered rim keeps food in place ▪▪Removable, rubber coated, stainless steel handle ▪▪Dishwater and oven safe
MGP A10-360L Stainless MGP A10-360LCB Stainless / Cobalt Blue
Induction Cookware All the same pieces as the standard sets in the Induction construction.
MGP A10-195 MGP A10-197
8” x 17” 11” x 17”
MGP A10-196
11-1/2” dia.
MGP A10-360LIND Stainless N W
E
Magma 7 Piece Stainless Steel
Magma Grill Tray
▪▪5 quart stock pot, 10-1/4” x 4-3/8” ▪▪9-1/2” sauté pan, 9-7/8” x 3” ▪▪Stock pot/sauté pan lid ▪▪2 quart sauce pan, 7-5/8” x 3-3/4” ▪▪Sauce pan lid ▪▪1 removable handle ▪▪“Bungee” storage cord
▪▪Use this grill tray and never again worry about the flaky fish, vegetables, or smaller items falling through the grilling surface ▪▪Can be used as an oven pizza tray or cooking sheet ▪▪304 stainless steel ▪▪Comes with a rubber coated, removable handle ▪▪Oven safe and dishwasher friendly MGP A10-297
MGP A10-362 Stainless
Induction Cookware MGP A10-362IND Stainless
N W
E
Magma 10 Piece Pro Stainless Steel w/Ceramica Non-Stick Same feature set as the stainless steel but coated with heavy duty non-toxic Light Grey or White Ceramica non-stick. MGP A10-366 MGP A10-366CB
Light Grey Ceramica / Stainless White Ceramica / Cobalt Blue
Induction Cookware All the same pieces as the standard sets in the Induction construction.
MGP A10-366-IND* Light Grey Ceramica / Stainless MGP A10-366CB-IND* White Ceramica / Cobalt Blue
* Request Items
8” x 17”
118
Magma
▪▪Telescoping professional quality-grilling tools ▪▪Manufactured with 18-9 marine grade mirror polished stainless steel with rubberized soft touch handles ▪▪Choose from (3) usable telescoping lengths for grilling then collapse to shortest length for space saving storage ▪▪Set includes: Spatula, tongs, fork, grill brush and carrying case. MGP A10-132T*
* Request Item
Magma Gourmet Steak-O-Meter
Magma LED Grill Lights ▪▪6 Individual high-intensity LED light bulbs ▪▪Easy use push button on-off switch ▪▪High temperature silicone cover protect against smoke, heat and water ▪▪Uses 9 volt battery (included) ▪▪Attaches to any Magma hinged lid grill Lid light
▪▪Attaches to any Magma telescoping grill tool Tool light
Jet Black
W
* Request Item
MGP A10-287JB
E
MGP A10-276* 4/pkg
▪▪100% quilted heat resistant cotton ▪▪Silicone palm/thumb with magma “M” logo for added heat protection ▪▪Embroidered Magma logo ▪▪Design allows for use with either hand ▪▪Convenient hanging loop ▪▪Sold by the each
N
▪▪4 individual steak thermometers are constructed of 100% 304 marine grade stainless steel ▪▪Exterior silicone coating keeps them cooler to the touch ▪▪Each individual thermometer has an easy to read dial to indicate the exact level of doneness
Magma Grilling Mitt
W
MGP A10-275
* Request Items
MGP A10-280JB* Jet Black MGP A10-280MR* Magma Red
E
▪▪100% 304 Marine grade stainless steel ▪▪Large easy to view 2” face with °F and °C Scales and red temperature indicator ▪▪Set the indicator to a desired temperature and when the needle reaches this point, cooking is complete
MGP A10-144*
▪▪Two convenient deep pockets ▪▪Towel loop for keeping towel handy ▪▪Fully adjustable neck and waist bands ▪▪Washer and dryer safe ▪▪Protects clothing from spills and splatters
* Request Items
Magma Gourmet Meat Thermometer
MGP A10-141*
Magma Embroidered Gourmet Grilling Apron
N
Appliances / Sanitation
Magma 5 Piece Telescoping Grill Tools & Storage Case Set
Magma Cockpit Umbrellas ▪▪New larger, stronger square design ▪▪Fade resistant UV protected acrylic nylon ▪▪Entire canopy reinforced to each corner ▪▪Tie-down point with polyester webbing ▪▪Venting mesh windproof design ▪▪Four corner tie-down attachment points ▪▪2-Piece fiberglass shaft with chrome brass joint ▪▪Quick release all-angle round rail mount, ▪▪Easily adjusts to any position ▪▪Matching storage case included MGP B10-404 MGP B10-405
Jet Black
MGP 10-481
Clamp assembly
Parts:
Pacific Blue
Reflective Silver Umbrella ▪▪All the features of the above but with a 100% UV block protective silver coating on the acrylic nylon canopy. MGP B10-403 Silver
119
Magma Magma LPG Low Pressure Gas Grill Connection Kit Used in conjunction with the correct Type 3 control valve (see below), this kit allows you to connect your Magma gas grill into your on-board, preregulated, low pressure LPG (propane) system. Includes all necessary brass fittings, safety shutoff valve and 10 feet (3 m) of preassembled, leak tested hose.
Type 3
Magma LPG Control Valves For preregulated, low pressure, on-board LPG (propane) systems. These stainless steel and brass control valves are designed to connect to the low pressure side of the regulator. Hose and fittings not included.
MGP A10-225
NOTE:
Magma Gourmet & Connoisseur Parts TrailMate A10-801
Replacement Parts
Valve/Regulator for Canisters Type 1 Grill
ChefsMate A10-803
Newport A10-918L / LS
Catalina A10-1218L
Monterey A10-1225L
MGP 10-262
MGP 10-263
MGP 10-263
MGP 10-264
MGP 10-265*
MGP 10-955 x 2
MGP 10-955 x 3
MGP 10-954 x 3
MGP 10-1254 x 3
MGP 10-1254 x 4
-
-
MGP 10-960
MGP 10-960
MGP 10-960
Grease Pan
MGP 10-924
MGP 10-961
MGP 10-961
MGP 10-961
MGP 10-961
Radiant Plate
MGP 10-923
MGP 10-964*
MGP 10-965
MGP 10-965
MGP 10-1065
Pizo Igniter
MGP 10-956C MGP 10-956L MGP 10-956R
Anti-Flare Plate (Centre, Left & Right)
MGP 10-927
MGP 10-957
MGP 10-957
MGP 10-957
MGP 10-1057
Thermometer
-
-
MGP 10-1270
MGP 10-1270
MGP 10-1270
Warming Rack
-
-
-
MGP 10-1271*
MGP 10-1071*
Low Pressure Valve for LPG Bottles Type 3
MGP A10-220
MGP A10-220
MGP A10-223
MGP A10-224
LPG 10' Hose Conversion Kit for above item. Type 3
MGP A10-225
MGP A10-225
MGP A10-225
MGP A10-225
Burner
Accessories
* Request Items
Magma Kettle Parts Replacement Parts
Marine Kettle (Original) A10-207
Marine Kettle (Party) A10-217
Valve/Regulator for Canisters Type 1
MGP 10-263
MGP 10-263
Grill
MGP 10-253
MGP 10-453*
Pizo Igniter
MGP 10-960
MGP 10-960
Grease Pan
MGP 10-161
MGP 10-161
Radiant Plate & Dome
MGP 10-765
MGP 10-665
Venturi Tube
MGP 10-160
MGP 10-160
Burner
MGP 10-657
MGP 10-657
Low Pressure Valve for LPG Bottles Type 3
MGP A10-220
MGP A10-220
LPG 10' Hose Conversion Kit for above item. Type 3
MGP A10-225
MGP A10-225
Accessories
Parts: MGP 10-466
Radiant plate assembly for A10-105/205
Type 1
Appliances / Sanitation
Magma discourages the use of high pressure propane lines on board boats. They recommend only pre-regulated, low-pressure, propane lines properly installed to American Boat and Yacht Council (ABYC) safety standards. High pressure propane hoses should be limited to "on-shore" applications.
120
Nova Kool
Top of the line, Canadian made refrigerators that are powered by DC or AC/DC. They utilize a DC compressor that is constructed with a traditional crankshaft, connecting rod, and piston driven by a brushless DC electric motor. The compressor automatically shuts down in low voltage conditions. If using an AC/DC unit, it automatically switches to AC when AC power is available. The interior lining is made of impact resistant polystyrene plastic with solid fill urethane insulation. Designed for marine use, they can operate at a constant angle of up to 30 degrees. The quiet DC compressor will not interfere with other equipment, when operated solely on DC voltage. *See crossover information on page 123 if you are replacing a fridge or freezer*
Appliances / Sanitation
Nova Kool Single Door Refrigerators
These units have a large interior volume with a small cut out dimension. Large reversible doors, with magnetic gaskets for a positive seal. All stainless steel hinges. Construction is rugged 18 gauge epoxy coated satin coat steel frame with a galvanized steel outer cabinet shell. Thermostat controlled for a wide range of settings. The removable door panel can be replaced to match differing interiors. Standard freezer compartments with doors and ice tray, except the R2600. Amp draw is 2.4 amp 12VDC. Volume (cu.ft.)
Cut-Out (H x W x D)
Flange
Panel max.
Weight
12/24 VDC 12/24 & 100/240 50/60 Hz
1.9
20-5/8” x 15-5/8” x 17-3/4”
21-3/8” x 16-3/8”
19-3/4" x 14-7/8”
40 lbs
12/24 VDC
2.1
28-3/8” x 16-3/4” x 14”
29-1/4” x 17-3/4”
28" x 16-9/16"
45 lbs
12/24 VDC 12/24 & 100/240 50/60 Hz
2.4
20-1/4" x 18" x 19-1/2"
21" x 18-3/4”
20-3/16” x 17-5/16”
39 lbs
12/24 VDC
2.5
24-5/8" x 19-1/4" x 15-1/2"
25-1/2" x 20-3/16"
24" x 19"
45 lbs
NOV R3800DC NOV R3800ACDC
12/24 VDC 12/24 & 100/240 50/60 Hz
3.5
28-3/8” x 20-1/4” x 18”
29-1/4” x 21”
28” x 19-5/8”
54 lbs
NOV R4500DC NOV R4500ACDC
12/24 VDC 12/24 & 100/240 50/60 Hz
4.3
28-3/8” x 20-1/4” x 21”
29-1/4” x 21”
28” x 19-5/8”
59 lbs
NOV R5810DC NOV R5810ACDC
12/24 VDC 12/24 & 100/240 50/60 Hz
5.8
31-7/8" x 23-1/8" x 23-3/4"
33-1/8" x 24-1/2"
29-5/8" x 21-3/8"
69 lbs
Part #
Volts
NOV R1900DC NOV R1900ACDC NOV R-2300DC NOV R2600DC NOV R2600ACDC NOV R-3000DC
† All regularly stocked fridges & freezers have hinges on the RIGHT side
R1900 R2300
R2600 R3800/R4500 R5810
Nova Kool Parts: NOV LATCH75 NOV THERMOSTAT NOV 101N0500 NOV 101N0210 NOV 101N0500 NOV FAN
Nova Kool Flange Kits Moulded plastic latch & strike Thermostat no box Electronic control module AC/DC Electronic 2000 Module DC only Electronic 2000 Module AC/DC 12V fan
Flange kit for the R3800 and R4500 provides a way of converting these units to fit directly into the existing cabinets of an older cut out of 32-7/8" H x 22" W without expensive and time consuming modifications. NOV FRAMEKIT-704
121
Nova Kool Nova Kool Two Door Refrigerators All the same features as the single door units. Low draw fan and interior light come standard with these units. The RFU8220 and RFU9000 are front venting and require no additional ventilation. *See crossover information on page 123 if you are replacing a fridge or freezer* Part #
Volts
Amps
Interior/Freezer (cu.ft.)
Cut-Out (H x W x D)
Flange
Panel 1 Panel 2
Wt**
Under Counter Refrigerators
NOV RFS7501DC* NOV RFS7501ACDC*
12/24 VDC 12/24DC/110AC
4.4
7.5 / 2.0
34” x 28” x 22”
35” x 29”
33-3/4” x 17-7/8” 33-3/4” x 9-5/16”
86 lbs
NOV RFU8220DC* NOV RFU8220ACDC
12/24 VDC 12/24DC/110AC
5.2
7.3 / 1.6
52-7/8” x 23-1/4” x 19-1/2”
53-3/8” x 24-5/16”
29-5/8” x 21-3/8” 13-1/4” x 21-3/8”
95 lbs
NOV RFU9000DC NOV RFU9000ACDC
12/24 VDC 12/24DC/110AC
5.2
9.1 / 2.5
52-7/8” x 23-1/4” x 22-3/4”
53-3/8” x 24-5/16”
13-1/4" x 21-3/8" 29-5/8" x 21-3/8"
100 lbs
*Request Items
RFS7501 RFU8220/RFU9000
W
Nova Kool Top Load Refrigerator/Freezers
D
▪▪Positive latch system L ▪▪Reversible door swing ▪▪Replaceable door panels for a custom finish to your interior ▪▪Environmentally sound 134a refrigerant ▪▪CFC free urethane foam in cabinet and doors ▪▪Magnetic door gaskets for positive seal ▪▪Stainless fasteners & hinges used throughout ▪▪Low battery protection to help prevent full discharge of batteries ▪▪Low amperage fan ▪▪Volume: 2.5 cu. ft. ▪▪Flange: 21” x 18-3/4” ▪▪Panel max: 20-3/16” x 17-5/16” ▪▪Weight: 58 lbs ▪▪AC/DC or 12/24 VDC & 100-240 VAC 50/60HZ NOV TL2500 DC* NOV TL2500 ACDC*
* Request Item
Cutout: D: 27” x L: 20-1/4” x W: 18” Cutout: D: 19” x L: 20-1/4” x W: 18”
Nova Kool Refrigerator (Replaces Common Ice Maker Cut-outs) The R1200 unit will hold wine bottles as well as cans of beverage. The 1200 does not have a freezer compartment; this allows more room for beverages. ▪▪Capacity: 1.3 cu ft. ▪▪Cut out: H: 24.75” x W: 14” x D: 14.5” to 16” ▪▪Frame: H: 25.5” x W: 15.125” ▪▪Weight: 37 lbs ▪▪Optional dual 110/220 AC
Note: The mounting flange can be moved to allow for shallow cut outs or left as a flush door. NOV R-1200DC* 12-24 DC NOV R-1200ACDC 12-24 AC/DC
* Request Item
Appliances / Sanitation
Upright Refrigerators
122
Nova Kool
Appliances / Sanitation
Nova Kool Refrigeration Systems
LT-201-F1
The simple, reliable and efficient means to convert an icebox into a refrigerator or even a freezer. It's a system engineered of components designed specifically for marine application. Three parts make up the system, a compressor assembly, a freezer unit, and a thermostat. The 12 volt compressor draws a very low amperage. The average draw is only 1.5 to 2.5 amps per hour in an adequately insulated box. The freezer unit is exactly like the freezer compartment in your household fridge, except smaller. The unit cools the entire box as well as provides a freezer. Anywhere from a 1 - 8 cubic foot icebox can be accommodated, equipping it to be a refrigerator, a full freezer or a combination refrigerator/freezer. Model #
Description
LT-201-FL
LT-201-F
LT-201-RT6
LT-201
Plates (L x W x D)
Capacity (Fridge / Freezer)
Weight (lbs)
NOV LT-201-F1
1 plate / compressor
16" x 10"
4 / 2.5 (cu. ft.)
24
NOV LT-201-F
3 plate / compressor
16" x 10" x (2" to 18")
12 / 8 (cu. ft.)
26
NOV LT-201-FL
1 plate / compressor
36" x 15" (can be bent for install)
14 / 8 (cu. ft.)
26
NOV LT-201-RT4
Compressor, ‘Freezer Box’
10.5” x 12.5” x 6.5”
12 / .5 (cu.ft.)
28
NOV LT-201-RT6
Compressor, 'Freezer Box'
14" x 6-3/4" x 11"
12 / .54 (cu. ft.)
28
LT-201 Specifications 12-24 VDC Variable speed compressor Low battery protection Compressor runs on a 30° angle Over sized air cooled condenser for easy installation in all high ambient temperatures L: 11" x W: 9" x D: 7-1/2"
Refrigeration Is About Balance The LT201 unit comes with the ability to change the speed of the compressor and increase or decrease the capacity to match the size of your cooler or freezer. By adding or removing one of the two resistors (red high speed black medium speed, no resistor slow speed) you can change the speed of the compressor from 2000 rpm to 3800 rpm. When running on slow speed (2000 rpm) you will draw approximately 2.4 amps @ 12 VDC, and 1.2 amps @ 24 VDC. Medium speed will draw approximately 4.4 amps and High speed approximately 6.0 amps. We recommend you try your unit on low speed (no resistor) and if it cycles on and off at the temperature you are looking for leave it set at low. refrigeration is more efficient if you run longer at a low amperage setting, than if you run shorter at a high amperage setting.
30-7/8
30-3/8
20-1/2
30-7/8
20-1/2
52-7/8
30-7/8
30-7/8
30-7/8
52-1/2
52-7/8
32-7/8
51-7/8
51-7/8
2.8
2.8
1.6
3.1
1.9
6.3
2.8
3.1
3.1
6.3
6.3
3.2
6.2
6.2
DE400
DE440
DE441
DE451
DE461
DE490
DE540
DE541
DE560
DE561
DE704
DE728
DE828
21
25-1/2
29
29
29
20-1/2
16
26
25-1/2
9 3/4
2.3
2.8
3.8
3.9
3.9
1.6
1.3
1.4
3.5
1
CR-1065
CR-1080
CR-1110
RSD-0115E
RSF-0115E
RPF-50SS
CB-036
CB-040
CB-110
CD-30
W
17
19
13-1/4
16
17-1/2
20-1/2
20-1/2
20-1/2
19
18
15
23-15/16
23-15/16
22-21
23-1/4
23-1/8
23-7/8
23-1/8
20-1/2
23-1/4
18-1/2
23-1/4
15-1/4
20-1/2
20-1/2
18-1/2
17-3/4
23-1/4
18-1/2
23-1/4
15-1/4
15-1/4
17-3/4
15
18-1/2
D
28-3/4
31-3/4
19-3/4
23
21
22
22
21-1/2
19
19-1/2
17-3/4
23
23
7/8
23-3/4
23-1/4
23-1/4
23-1/4
20-1/8
23 3/4
21
23-1/2
17-3/4
20-3/4
20-1/8
21
20-3/8
24-3/4
21
23-1/2
17-3/4
17-3/4
20-3/8
18
21
MODEL
N/A
TL2500*
N/A
N/A
F1900*
F3800*
R4500*
R4500*
R3100
R2600*
R1900*
NOVAKOOL
RFU9000*
RFU9000*
R4500 & FRAME704
RFU9000*
RFU9000*
R5810*
R5810*
R4500 *
RFU9000 *
R2600*
R5810*
R1900*
R4500*
R4500*
R2600*
R2600*
RFU9000*
R2600*
R5810*
R1900*
R1900*
R2600*
R1900*
R2600*
H
2.5
1.9
3.5
4.3
4.3
3
2.4
1.9
9.1
20-1/4
20-5/8
28-3/8
28-3/8
28-3/8
28-3/8
20-1/4
20-1/2
52-7/8
52-7/8
28-3/8
4.3 9.1
52-7/8
52-7/8
31-3/4
31-3/4
28-3/8
52-7/8
20-1/4
31-3/4
20-5/8
28-3/8
28-3/8
20-1/4
20-1/4
52-7/8
20-1/4
31-3/4
20-5/8
20-5/8
20-1/4
20-5/8
20-1/4
9.1
9.1
5.8
5.8
4.3
9.1
2.4
5.8
1.9
4.3
4.3
2.4
2.4
9.1
2.4
5.8
1.9
1.9
2.4
1.9
2.4
VOL
W
18
15-5/8
20-1/4
20-1/4
20-1/4
16-3/4
18
15-5/8
23-1/4
23-1/4
20-1/4
23-1/4
23-1/4
23-1/8
23-1/8
20-1/4
23-1/4
18
23-1/8
15-5/8
20-1/4
20-1/4
18
18
23-1/4
18
23-1/8
15-5/8
15-5/8
18
15-5/8
18
D
18-3/4
17-3/4
18
21
21
18-1/2
19-1/2
17-3/4
22-3/4
22-3/4
21
22-3/4
22-3/4
23-3/4
23-3/4
21
22-3/4
19-1/2
23-3/4
17-3/4
21
21
19-1/2
19-1/2
22-3/4
19-1/2
23-3/4
17-3/4
17-3/4
19-1/2
17-3/4
19-1/2
* CHOOSE VOLTAGE OPTION DC ONLY OR AC/DC RFU8220 AND RFU9000 BOTH HAVE EASILY REMOVED MOUNTING FLANGES THAT REDUCE DEPTH BY 3/4" TO GET THRU TIGHT SPOTS RFU8220 IS IDEAL FOR APPLICATIONS WHERE CLEARANCE THRU DO0RWAYS ETC IS LIMITED TO GET UNIT INTO BOAT RFU8320 IS IDEAL FOR APPLICATIONS WHERE CUT OUT HEIGHT CANNOT BE INCREASED TO 52 7/8" FROM ORIGINAL 51 7/8 (DE828/728) FRAME704 WHEN USED IN CONJUNCTION WITH R4500 OR R3800 TO REPLACE THE DE704
21
1.7
CR-1050
WAECO/DOMETIC
20-1/2
1.9
DE390
2.7
DE0051
DE351
20-1/2
3.6
DE0041
20-1/4
30-7/8
1.7
DE0040
52-7/8
20-1/2
1.7
DC340
7
20-1/2
1.9
DC254
1.9
20-1/4
1.7
DC230
DE251
20
2.7
DE0061
H
20-1/2
VOL
MODEL
DC0051
NOVAKOOL
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
NK55
R3800*
R3800*
R1600*
RFU8220*
RFU8220*
R5810*
RFU8220*
RFU8220*
R4500*
R4500*
R3800*
RFU8220*
R4500*
R1600
R3800*
R3800*
RFU8220*
R4500*
R1600
R1600
R1600
MODEL
1.94
3.5
3.5
1.4
7.3
7.3
5.8
7.3
7.3
4.3
4.3
3.5
7.3
4.3
1.3
3.5
3.5
7.3
4.3
1.3
1.3
1.3
VOL
Fridge
24
28-3/8
28-3/8
20-1/2
52-7/8
52-7/8
31-3/4
52-7/8
52-7/8
28-3/8
28-3/8
28-3/8
52-7/8
28-3/8
20-5/8
28-3/8
28-3/8
52-7/8
28-3/8
20-5/8
20-5/8
20-5/8
H
26
20-1/4
20-1/4
15-5/8
23-1/4
23-1/4
23-1/8
23-1/4
23-1/4
20-1/4
20-1/4
20-1/4
23-1/4
20-1/4
15-5/8
20-1/4
20-1/4
23-1/4
20-1/4
15-5/8
15-5/8
15-5/8
W
Freezer
19
18
18
13-3/4
19-1/2
19-1/2
23-3/4
19-1/2
19-1/2
21
21
18
19-1/2
21
13-3/4
18
18
19-1/2
21
13-3/4
13-3/4
13-3/4
D
VOL
7.3
7.3
Fridge/Freezer
RFU8320
RFU8320*
MODEL#
23-1/4 23-1/4
45-1/2 45-1/2
Top Loading
W
H
Appliances / Sanitation
NORCOLD
Drawer
21-3/4
21-3/4
D
Nova Kool
123
Norcold/Waeco/Dometic Crossover Chart
124
Seaward Seaward Single Burner Electric Gourmet Stove
Appliances / Sanitation
Seaward Drop-In Propane Stove Low profile counter top two burner stove is designed for maximum cook top area in minimal galley space. 100% safety controls automatic shut-off thermal couple valves shut off fuel in case flame blows out. Burners controlled by infinite adjustable valves. Automatic ignition. Porcelain enamel burner grates and burner caps. ▪▪Black glass top ▪▪Overall W: 21” x D: 12” x H: 2-7/8” ▪▪Cut-Out W: 20-3/8” x D: 11-3/8” x H: 2-7/8” SWD 2276-1000
Seaward Pot Holders
93527
Set of two stainless steel pot holders for ranges. SWD 93527 Standard SWD 93277 Euro style
Seaward Three Burner Electric Stove ▪▪Bevelled edge ▪▪Drop-in, frameless, flush mount Ceran glass with black graphics ▪▪120V, three 1,200 watt radiant elements ▪▪Limiters in burners prevent overheating ▪▪UL 858 or CE Certified ▪▪Overall: 22" W x 20" D x 2-7/8" H ▪▪Cutout: 21-3/8" W x 19-3/8" D x 2-7/8" H SWD 3247-5100
Seaward Two Burner Electric Stove ▪▪Drop-in, flush mount Ceran glass. Two 1000 watt radiant elements ▪▪Limiters in burners to prevent overheating ▪▪UL 858 or CE Certified ▪▪Overall size: 22W x 13D x 3" ▪▪Cut-out: 21-3/8 x 12-3/8D x 3" SWD 2247-5100 SWD 2247-5200*
* Request Item
120 Volt 240 Volt
Seaward Two Burner Electric Gourmet Stove ▪▪Drop-in, flush mount unit with a Ceran glass top and graphics ▪▪120V, two 1,200 watt radiant elements ▪▪Built in limiters to prevent overheating ▪▪Overall: 22" W x 13" D x 3" H ▪▪Cutout: 21-3/8" W x 12-3/8" D x 3" H SWD G2247-5100
▪▪Drop-in, flush mount unit with a Ceran glass top and graphics ▪▪120V, 1,200 watt radiant element ▪▪Built in limiters to prevent overheating ▪▪Overall: 13" W x 13" D x 3" H ▪▪Cutout: 12-3/8" W x 12-3/8" D x 3" H SWD 1247-5100*
* Request Item
Seaward Welded Aluminum Propane Tanks All tanks DOT approved. ▪▪Brass valve ▪▪Will never rust out
93131-M
*Re-certification dates for all aluminum tanks is 12 years*
Part #
lbs
Volume
Dimensions
10
2.5 gal
Dia: 11" x H: 17"
Horizontal
10
2.5 gal
Dia: 11" x H: 17"
SWD 93136-M*
Vertical
20
5 gal
Dia: 13" x H: 21"
SWD 93138-M*
Horizontal
20
5 gal
Dia: 13" x L: 21"
SWD 93131-M
Vertical
SWD 93137-M*
* Request Items
Seaward Compact Propane Locker A completely self contained propane system. Rotational molded polyethylene construction. Sealed lid with molded inserts holds tank secure even in the roughest sea conditions. Vent port allows overboard venting. Hold down brackets for easy installation. Quick release lid top facilitates access to tank, regulator, and leak test gauge. System includes: one gallon tank, regulator, leak test gauge, vent kit and solenoid. ▪▪10 lb locker kit with aluminium tank & solenoid ▪▪W: 16-1/2” x D: 13-1/2” x H: 18-1/2” SWD 93271
Seaward LPG Propane Panel LPG on/off panel for solenoid control of LP tanks ▪▪5 amp reset fuse ▪▪On indicator light ▪▪Width: 4-1/2”, Height: 3-1/4” SWD 93156
Seaward Regulator Kit Regulator kit contains: -1 x LPG spud (75373) -1 x Tee (70190) -1 x Pressure guage (70191) -1 x 3/8” pipe to 3/8” flare fitting (70192) -1 x LPG regulator (73509) SWD 93141
Seaward
125
Seaward 12 Volt Water Heater
An economical, combination electric/engine heat exchanger, water heater. Heats water quickly from the 120 volt-1500 watt, 13” electric element while on A.C. power or from the heat exchanger from the engine’s cooling system while under way. Hold down brackets are welded directly to the aluminum tanks. Comes complete with a temperature pressure relief valve, temperature & pressure drain tube and are ignition protected. Seaward tanks carry an extended 1 year limited warranty on all parts and on tanks against leaks due to rust and corrosion. ▪▪Domestic water ports: 1/2” IPT ▪▪Heat exchanger: 5/8” hose barbs ▪▪Re-settable 190° high limit switch ▪▪Exterior choices are marine galvanized steel, white powder coated aluminum or stainless steel ▪▪UL & CE approved ▪▪Rear exchangers have the 5/8” engine fittings on the back side
An electric only 12 V water heater is ideal for outboards. The neat design of the water heater means it can fit in compact spaces and electric only means installation is no longer tied to the engine room. The water heater has a rapid heat up time with hot water in less than an hour and is highly efficient with heat retention of up to 10 hours. ▪▪12V power supply - No generator / inverter/ shore power required ▪▪Ideal for use with deck showers ▪▪Low current switching ▪▪Integrated temperature and pressure valve ▪▪Thermal cut-out ▪▪Heating Indication output ▪▪Ignition protected (ABYC E-11) ▪▪Compact design - Fits in small places ▪▪H: 35 x W: 33 x D: 26.6 cm ▪▪Weight: 6.8 kg
Gal
WxDxH
Material
SWD S300W
Side
3
13” x 9” x 13”
Powder coated White
SWD S600
Rear
6
13” x 19” x 13”
Galvanized steel
SWD S600W
Rear
6
13” x 19” x 13”
Powder coated white
SWD F600
Front
6
13” x 19” x 13”
Galvanized steel
SWD F600W
Front
6
13” x 19” x 13”
Powder coated White
SWD F700
Front
6
13” x 19” x 13”
Stainless steel
SWD S700
Rear
6
13" x 19" x 13"
Stainless steel
SWD S1100
Rear
11
16" x 22" x 16"
Galvanized steel
SWD F1100
Front
11
16” x 22” x 16”
Galvanized steel
SWD F1200
Front
11
16” x 22” x 16”
Stainless steel
SWD S1200*
Rear
11
16” x 22” x 16”
Stainless steel
SWD S1900
Rear
18
20-1/4” x 20-1/4”
Stainless steel
* Request Item Spare Parts:
SWD 73127 SWD 73129 SWD 74032 SWD 74031 SWD 74563
Water tank pressure relief valve Water heater thermostat 240V-1500W heating element Heating element 120 volts High limit switch 120 volts
* Request Item
Appliances / Sanitation
Heat Exchanger
W E
SWD S360EW*
Part #
N
Seaward Water Heaters
126
VacuFlush VacuFlush 4800 Designer Series
Appliances / Sanitation
VacuFlush 5000 Series - Full Size Comfort Large household size bowl with shallow front-to-back footprint delivers installation ease and user comfort for all boat sizes. ▪▪1 pint per flush ▪▪Foot-pedal flush ▪▪Standard, medium and low-profile heights ▪▪Above & below floor discharge options *The outlet direction is taken when facing the toilet*
Luxurious comfort in a compact fixture - featuring electronic remote switching, elongated seat and “plug-in base”. ▪▪All-ceramic construction ▪▪Automatic flushing cycle ▪▪Very low water consumption (1.5 pints/.7 litre per flush) ▪▪Optional wall mounted push-button operation ▪▪Full-size seat with elongated opening ▪▪New flush mechanism reduces noise ▪▪Through or above the floor discharge 148481 / 148091
5006 Models
VAC 148481*
▪▪Low Profile design ▪▪Discharge through floor, hose or pipe ▪▪Seat height: 12-3/8" x W: 17-1/4" x D: 18-3/8"
VAC 148061*
VAC 148091*
VAC 500601 White VAC 500603* Bone
5009, 5047, 5048 Models ▪▪Standard height ▪▪Discharge through floor, hose or pipe ▪▪Seat height: 16-1/2" x W: 14-7/8" x D: 18-3/8" VAC 500901 White VAC 500903* Bone
5047 Models ▪▪Standard height ▪▪Discharge above the floor at right of base ▪▪Seat height: 16-1/2" x W: 14-7/8" x D: 18-3/8" VAC 504701 White VAC 504703* Bone
5147, 5148
Options:
Model 4848, White, standard height, above or through the floor discharge, D: 18-5/8" x W: 14-3/4" Model 4806, White, low profile, through the floor discharge, D: x 16-1/4" x W: 14-3/4" Model 4809, White, standard height, through the floor discharge, D: 18-5/8" x 14-3/4"
VAC 408010* Electronic backlit flush panel w/service mode
* Request Items
VacuFlush 4700 Designer Series Same features as the 4800 Series above with deluxe styling and flat back design. ▪▪Elongated opening wooden seat ▪▪Service switch is easy to access ▪▪Through the floor discharge outlet is 1.5" ▪▪Excellent fixture for larger yachts & houseboats VAC 472251* VAC 472281*
* Request Items
12 volt 24 volt
5048 Model
VacuFlush 140 Series For Smaller Boats
▪▪Standard height ▪▪Discharge above the floor at rear of base ▪▪Seat height: 16-1/2" x W: 14-7/8" x D: 18-3/8"
▪▪1 pint flush ▪▪Above-the-floor discharge ▪▪Foot pedal flush ▪▪Pedal lock for tank pump out ▪▪White
VAC 504801 White
5147 Models
Right side discharge
▪▪Medium height ▪▪Discharge above the floor at right of base ▪▪Seat height: 15" x W: 14-7/8" x D: 18-3/8"
VAC 014701
VAC 514701 White VAC 514703* Bone
Rear discharge VAC 014801
Left side discharge VAC 014901
5148 Model ▪▪Medium height ▪▪Discharge above the floor at rear of base ▪▪Seat height: 15" x W: 14-7/8" x D: 18-3/8" VAC 514801 White
* Request Items VacuFlush is only sold by Factory Authorized Installing Dealers
VacuFlush VacuFlush J-Series Vacuum Generators
SeaLand/VacuFlush Parts
Installation Flexibility - Pump body and plumbing fittings easily rotate to accommodate diverse plumbing layouts. Inlet and outlet fittings are interchangeable.
SLD 230980 SLD 236096 SLD 230335 SLD 238685 SLD 310048 SLD 310076 SLD 310151 SLD 310228
▪▪Pump Flow - Large 2" (51mm) ID duckbill valves improve flow through pump ▪▪Dimensions: 20-1/8" x 9-1/8" x 14" VAC 780012 12V VAC 780024* 24V
SLD 311208 VAC 311216
Duck bills 2/pkg Vacuum switch
VacuFlush Low Profile Vacuum Generator Only 8" inches high allows this vacuum generator to be installed in shallow spaces. Vacuum tank and pump can be mounted separately. ▪▪Clears bowl instantly ▪▪4-6 amp. draw per flush VAC 770012 12V
Parts:
VAC 311436
Vacuum switch
VacuFlush Vacuum Tank SeaLand's vacuum tank is the nerve centre of the system. Made of heavy duty PVC, it can be mounted up to 20 feet from the toilet on the deck or bulkhead. It stores the vacuum required to flush the toilet and work the system. A differential switch is located in the tank that monitors the vacuum. When a drop in vacuum is sensed, it signals the pump to activate. If more than one toilet is installed in a system, each of the toilets must have a tank. Inlet and outlet connectors: 1-1/2" hose barb. ▪▪H: 11-1/2” x L: 24-1/2” x W:9-1/2” VAC 729100
Complete tank
VAC 318032
Vacuum switch for vacuum tank
Parts:
VacuFlush S-Series Vacuum Pumps The S-Series vacuum pump is an electric, straight through, bellows type pump. It is manufactured of long lasting polypropylene, draws 2 to 6 amps at 12V. It can be mounted up to 20' away from the vacuum tank but must be mounted right side up. The bellows style allows it to be run dry without damage. ▪▪Weight: 8 lbs. ▪▪Inlet and outlet connections: 1-1/2" hose barb Part #
VAC 201200 VAC 202400
Breaker/Fuse 12V, 12-14 ga - 10A 24V, 14-16 ga - 5A
SLD 310902 SLD 310076
Pump repair kit, “O”-ring, bushing & shaft Duck bill kit for “S & T” pumps 2/pkg
Parts:
Volts
SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD SLD
Bellows kit for "S & T" pumps Spring cartridge for toilets w/metal bracket Vacuum breaker assembly Holding tank cleanout kit Ring & Half clamp kit Duck bill kit for "S & T" pumps 2/pkg "O" ring replacement for "S and T" pump 2/pkg Water valve, seal kit, 4 duckbill valves, tester & manual 311580 24V relay 311641 Water valve kit 310 model 310683 Spring cartridge-Ecovac 311462 Teflon & rubber vacuflush seal kit 314349 Water valve kit 316906 Vacuum breaker for "800" series 318065 Vacuum breaker for "500" series 319039 'O' ring-old style S/T pump 318162 Ball shaft and cartridge kit 319054 Vacuum breaker w/ hand spray 300011 Inline check valve 310063 Floor flange seal kit 310064 Mounting kit (315057) 310682 Ecovac flush pedal/cart.White 310954 Halfball/shaft/cartridg-ecovac 311384 In-line check valve kit 311581 2” Duckbill valve (4/pkg 311822 “M’ pump diaphram 343829 Seat & cover white 344436 Seat & cover white
VAC 310540 Switch kit VG3 VAC 311423 Whisper motor kit 12V
VacuFlush Status Panel Providing protection for the vacuum pump, this attractively styled panel allows the owner to shut the system down during the night. It continuously monitors the status of the vacuum to ensure trouble free operation, and indicates loss of electrical power or system power off. 10 amp. circuit breaker. ▪▪3.25" x 3.25" VAC 530012 12V VacuFlush is only sold by Factory Authorized Installing Dealers.
Appliances / Sanitation
Parts:
127
128
VacuFlush
VacuFlush SailVac 5200 Vacuum Holding Tank
VacuFlush Vacuum Holding Tank Systems 140 & 5100 Series Only Includes Pedal Lock that holds flush valve open during pump-out to completely discharge holding tank. Small footprint fits anywhere.
Appliances / Sanitation
This totally integrated VacuFlush toilet/ vacuum holding tank system is the perfect answer - holding as many flushes as a standard 30-gallon tank when used with a typical marine toilet. ▪▪“3/4 Full” & “Full” tank probes & indicator panel ▪▪Automatic “Full” shutdown prevents tank overfill Requirements:
▪▪Toilets with pedal lock ▪▪Water Supply: Line/Fitting: .5" MPT ▪▪Flow: 2 gpm at toilet ▪▪Discharge: 1.5" ID hose connected to VHT 4500 model
Specifications:
▪▪Waste Capacity: 9.0 gallons (34 l) ▪▪Weight of basic VHT4500: 30 lbs ▪▪W: 12-1/4" x L: 28" x H: 22-1/4"
VAC 704511*
*Request Item
Key Benefits ■ ■ ■ ■ ■ ■ ■ ■ ■
Compact unit incorporates vacuum pump, vacuum resevoir and holding tank Vertical curved profile for hull installation When used with VacuFlush toilet, provides tank capacity for two people for four days Roto-molded 8mm polyethylene Interior baffle system protects vacuum components at high angles of heel Reinforcing ribs prevent tank distortion Corrosion, leak and odour-proof “3/4 Full” & “Full” tank probes & indicator panel Automatic “Full” shutdown prevents tank overfill
Specifications:
▪▪Waste Capacity: 14.0 gallons (53 l) ▪▪5/8" vent hose ▪▪Power draw: 3 amps @12VDC
VAC 705200
HTS system & panel
HTS system w/discharge pump & panel
There are many VacuFlush Holding Tank Systems available. Please ask for the complete catalogue.
VacuFlush VacuFlush Holding Tank Systems with Built-in Vacuum Generators
VacuFlush RushFlush 9300 Toilet System
Virtually any boat from 19 feet in length and longer can feature a complete VacuFlush toilet system. Many HTS-VG models include level indicators, vacuum relief valve, vent filter and discharge pump for added convenience and reliability. ▪▪Tankwatch, TankSaver, 1 outlet
VAC 711012*
10 US gallons
▪▪Tankwatch, TankSaver, 2 outlets, discharge pump & vent filter 28 US gallons
▪▪Tankwatch, TankSaver, 2 outlets, discharge pump & vent filter
VAC 713512*
* Request Items
35 US gallons
Dual High-Velocity Water Jets With Plug & Play Installation For offshore vessels that accommodate high-flow toilet systems, RushFlush™ marine toilet technology delivers unmatched power, resource efficiency, and ease of installation when compared to similar toilet systems. The energetic RushFlush power begins with two hyper-pressurized water lines that converge at the bowl – through the high-capacity upper rim for a thorough bowl-clearing rinse every time, and a simultaneously charged water jet at the bottom of the bowl that macerates effluent and drives it to the discharge plumbing. This patent-pending design offers adjustable flush duration programming to meet individual water efficiency requirements. RushFlush toilets feature the popular SeaLand all-ceramic fixture used in thousands of specialty bathroom applications – a full-size, residential-style toilet with a large, deep bowl and elongated seat for premium comfort. ▪▪Standard height, thru-floor, White, 12V VAC 931131*
711012 10-Gallon
*Request Item
712812 28-Gallon
Key Benefits
713512 35-Gallon
There are many VacuFlush Holding Tank Systems available. Please ask for the complete catalogue.
■ ■ ■ ■ ■ ■ ■ ■ ■
Dual high-velocity water jets clear the bowl, macerate waste, and propel effluent to the holding tank Easy, fast, plug & play toilet installation Elongated, comfortable seat and deepbowl Uses electric flush handle or wall switch Freshwater, odor-free flushing No mechanical waste-macerating system needed 3/4 full-tank warning indicator option Full-tank shutdown option prevents overflow Automatic “Full” shutdown prevents tank overfill
Appliances / Sanitation
VAC 712812*
129
SeaLand
SeaLand MasterFlush 8100 Series Macerator Toilets
SeaLand MasterFlush 7100 Series Orbit Toilets
Macerator toilets powered with MasterFlush technology. The contemporary shape features a compact footprint to fit in most any head compartment. ▪▪Powerful macerator flush ▪▪Small footprint - fits in most any head compartment ▪▪Standard and low-profile heights ▪▪Through-the-floor or through-the-wall discharge options ▪▪“Normal” or “Rough Sea” flush options ▪▪Comes with switch ▪▪Low profile H: 13-3/4” x W: 14-3/4” x D: 18-3/8” ▪▪Standard H: 17” x W: 14-3/4” x D: 18-3/8” ▪▪Colour: White
▪▪Home-like comfort and size in a basic marine head ▪▪Full 360-degree bowl-to-base rotation allows virtually limitless positioning to accommodate small spaces and diverse plumbing layouts ▪▪Large residential-style seat and deep bowl for premium comfort ▪▪Small footprint to fit in tight spaces ▪▪Fresh water flush models have an integrated water valve ▪▪Raw water flush models have an integrated water pump ▪▪Flushes on as little as 1/3-gallon (1.2 l) of fresh water ▪▪Dual-stage impeller/macerator cutting wheel pulverizes waste for optimum discharge flow and most thorough waste tank pump-out Maximum installation flexibility ▪▪Draws only 20 amps at 12 VDC ▪▪Standard dual-function "add water/flush" switch ▪▪H: 14-3/4" x W: 15" x D: 19"
SLD 811201 12V, Low profile SLD 811601* 24V Low profile SLD 815201* 12V, Standard profile SLD 815601* 24V, Standard profile
311702
*Request Items
SeaLand MasterFlush 8700 Series Macerator Toilets ▪▪Powerful macerator flush ▪▪Integral water trap provides quiet yet effective flushing action ▪▪Wall mounted Touchpad flush panel (optional) or toilet mounted flush lever ▪▪Through-the-floor or through-the-wall discharge options ▪▪Wood seat with elongated opening ▪▪Discharge outlet is both 1-1/2” (38mm) straight and 90° elbow outlets (through floor or above the floor) ▪▪“Normal” or “Dry Bowl” flush options ▪▪12V or 24V operation ▪▪H: 19” x W: 16-1/2” x D: 22-1/2” 874009 ▪▪Colour: White NOTE The lever flush series does not require a separate switch to operate and the panel flush series comes with a remote panel. SLD 874002* SLD 874009*
12V, lever flush 24V, lever flush
SLD 874301* SLD 874302*
12V, panel flush 24V, panel flush
*Request Items
SLD 712001 SLD 716001 SLD 726001*
*Request Items
W E N
Appliances / Sanitation
130
Fresh water flush, standard bowl Raw water flush, standard bowl Raw water flush, compact bowl
▪▪ "Normal flush" ▪▪ Pressure activated toilet flushes as long as switch is pressed
SeaLand
131
SeaLand SaniPottie Portable Toilets
SLD 096202 SLD 096602 SLD 196406 SLD 196506
2.5 gal, Tan, H: 12" x W: 14-1/2" x D: 16-1/2" 5.0 gal, Tan, H: 15-1/2" x W: 14-1/2" x D: 16-1/2" 2.5 gal, Grey MSD direct discharge 5.0 gal, Grey MSD direct discharge
SLD 310018 SLD 310239 SLD 310572 SLD 310573 SLD 239064 SLD 310031 SLD 310050 SLD 310066 SLD 310067 SLD 310102 SLD 310103 SLD 310104
S/S hold down brackets for 2.8 gal S/S hold down brackets for 5 gal Parchment parts kit Platinum parts kit Slide valve assembly - white Cap & seal - White Cap & seal kit Latch assembly - white Latch assembly - tan Cap kit - tan Cap kit - platinum Bellows kit - tan
Parts:
SeaLand SaniPottie 970 Series Portable Toilets ▪▪Pressure flushing action provides powerful bowl rinsing ▪▪Push-button operation is as convenient as a household toilet (no pumping after every flush) ▪▪Material is high-impact ABS with a durable shiny surface ▪▪Level indicator continuously shows tank level through last half of the total volume ▪▪Swing-out discharge spout is extra long ▪▪Two automatic lower tank vents greatly reduce possibility of splashing while emptying ▪▪Manual lower tank vent is easier to use because it does not have to be continuously held open ▪▪Self-contained freshwater 2.3 gallon tank ▪▪2-tone grey ▪▪MSD models can be installed for direct overboard, dockside pump-out, or remote tank discharge SLD 097406 SLD 097506 SLD 197406 SLD 197502 SLD 197506
Parts:
SLD 320005
2.6 gal, H: 12-1/2" x W: 13-1/8" x D: 15-1/4" 5.0 gal, H: 15-1/4" x W: 13-1/8" x D: 15-1/4" 2.6 gal, MSD w/ fittings for direct discharge 5.0 gal, MSD w/ fittings for direct discharge, Tan 5.0 gal, MSD w/ fittings for direct discharge, Gray Hold down bracket
SeaLand Gravity Discharge Toilets The gravity discharge toilet is designed to mount over a 3” closet flange in the top of a holding tank. Household size, china bowl is rinsed from onboard demand water system coupled to the 1/2” MPT fitting on the toilet. It has an integral anti-syphon vacuum breaker and a single pedal for water level and flushing control. ▪▪White SLD 510221 Wooden seat, H: 17-1/8" x D: 20-1/2" x W: 15-1/4"
Parts:
SLD 345889 3" threaded floor flange SLD 345892 3" socket floor flange
SeaLand Traveler Marine Sanitation System A complete freshwater system in one self contained package. Ideal replacement for re-circulating toilets. China bowl is rinsed with fresh water from onboard demand system. No electrical connections. Integral anti-syphon vacuum breaker protects potable water supply. Water level and flushing action controlled by single pedal control. ▪▪Holding tank is molded fibreglass with 9 gallon capacity ▪▪Discharge connection is 1-1/2" hose insert ▪▪Vent connection is for 5/8" hose ▪▪Water connection is 1/2" MPT ▪▪Includes stainless steel mounting bracket and hardware ▪▪Colour: Bone ▪▪H: 19-3/4" x D: 18-3/4" x W: 18-7/8" SLD 371103
Appliances / Sanitation
Completely self-contained, they operate on their own 2.6 gallon clean water supply with no hook up to water or power. Easy access top mounted water port provides convenient in-vessel refill. ▪▪High density polyethylene construction, matte finish ▪▪2.5 or 5.0 gallon freshwater tanks; enough for about 30 to 60 uses. ▪▪MSD models can be installed for direct overboard, dockside pump-out, or remote tank discharge
132
SeaLand
SeaLand Holding Tanks ▪▪Leak-proof Design - Top-mounted hose connections eliminate standing liquid in discharge hose ▪▪Odour-free-100% virgin polyethylene resin with heavy walls prevents odour permeation and resists corrosion ▪▪Implosion Protected - TankSaver vacuum relief valve prevents damage from dockside pumps high levels of vacuum ▪▪ISO/USCG Compliant - SeaLand holding tanks fully comply with the ISO 8099:2000(E) standard SLD 840152 SLD 840201 SLD 840301
15 HTS-Vertical (15 gallon) 20 HTS-Horizontal (18 gallon) 30 HTS-HRZ (28 gallon)
840201
Appliances / Sanitation
840152
SLD 800121* SLD 800251 SLD 800281* SLD 800351* SLD 840121* SLD 840122* SLD 840151* SLD 840202 SLD 840401
12 HTS-HL (11 gallon) 25 HTS-HRZ (25 gallon) 25 HTS-HL (28 gallon) 35 HTS-HL (35 gallon) 12 HTS-HRZ (11 gallon) 12 HTS-VRT (11 gallon) 15 HTS-HRZ (15 gallon) 20 HTS-Vertical (18 gallon) 40 HTS-HRZ (34 gallon)
840301
NOTE Additional sizes are available. Ask for a SeaLand Tank catalogue.
*Request Items 800121
800251
800281
840122
800351 840121
840151
840202
840401
133
SeaLand SeaLand Holding Tank Systems
SeaLand Inlet Elbow With Uniseal
This system combines a level indicator and relief valve with a holding tank. Also has integral mounting feet that eliminate the need for any strapping. Has separate dockside and overboard connections. The TankSaver relief valve protects the holding tank from excessive suction by strong dockside pumps and satisfies pending ISO regulations for 1-1/2" venting. This system exceeds proposed ISO standards because of it's 95% tank contents removal performance. Has unmatched durability because of its 3/8" wall thickness.
▪▪Inlet Elbow with uniseal ▪▪Can also be used as a discharge dip tube by gluing 1-1/2” PVC pipe into the bottom ▪▪Requires a 3” hole
28 gallon 40 gallon
* Request Items
10 gallon 28 gallon 40 gallon
012812
Pipe Size
Cut Out
SLD 311110
2"
3”
SLD 311111
1-1/2"
2-1/2"
SLD 311164
1/2"
1-1/8"
SeaLand Noz-All Pump Out Adapters
721012
014012
SeaLand Holding Tank Dip Tube Kit ▪▪Reduces chances of hose failure ▪▪Allows waste to be removed from the top of the tank ▪▪Eliminates stagnant sewage from sitting in discharge lines ▪▪Fits tanks up to 30" deep with a 3" hole required SLD 310660
SeaLand Tank Saver Relief Valve ▪▪Protects holding tanks from excessive dockside pump suction ▪▪Easy to install ▪▪Provides excellent odour seal ▪▪Reduces pump out time ▪▪Meets ISO standards for 1-1/2" venting ▪▪Requires 3" opening to install SLD 255247
This rubber seal allows for an easy installation of a PVC pump out or inlet pipe into the top of a holding tank. Part #
All the features as the systems above but also includes a T-series discharge pump SLD 721012* SLD 012812 SLD 014012
SeaLand Uni-Seals
▪▪Makes for easy, clean dockside pump outs ▪▪Made of durable heavy duty nylon ▪▪Provides airtight seal between deck fitting & dockside pump ▪▪Allows pump to prime without waste ▪▪Works with both rubber nozzles and cam operated type suction hose fitting Part #
Size
Thread Pitch
Deck Fitting
SLD 343502 SLD 343503
1-1/2"
11.5 TPI
1-7/8"
1-1/4"
16.0 TPI
1-5/8"
SLD 343504
1-1/4"
16.0 TPI
1-5/8"
SeaLand T-Series Discharge Pumps ▪▪Discharge pump designed to pump out holding tanks ▪▪Self-priming to 10 feet ▪▪Handles solids to 1/2" dia. and can be run dry ▪▪Included are 1-1/2" & 1" adapters to permit direct replacement of other macerator pumps ▪▪Weight: 10 lbs Part #
VDC
GPH
Amps
Fuse
SLD 301200
12
300
6
10
SLD 302400
24
300
3
5
Parts:
SLD 310902 SLD 310076
Pump repair kit, “O”-ring, bushing & shaft Duck bill kit for “S & T” pumps 2/pkg
Appliances / Sanitation
SLD 012800 SLD 014000*
SLD 311608
134
SeaLand N E W
SeaLand ECO Holding Tank Vent Filter Kit ▪▪Improved malodorous gas filtration ▪▪Uses 55% less plastic than previous vent filter cartridge ▪▪Earth-friendly, recyclable plastic components ▪▪Fits in the same space and brackets as previous filters ▪▪Fits 5/8”, 3/4” and 1-1/2” hose fittings ▪▪One replacement cartridge fits all SeaLand ECO filter sizes
Appliances / Sanitation
SLD 311001
SeaLand MaxFlex Sanitation Hose
New DTM systems feature an enhanced fourlevel LED indicator for waste, water or gray water tanks as well as a more compact design as compared to previous panels. ▪▪Highly reliable micro-float switches ▪▪Easy-to-read panel (includes International symbology) ▪▪Complete packages include 22" tank probe cap (s), micro-float switches, lighted indicator panel ▪▪12 or 24 VDC operation SLD 604001 SLD 604002 SLD 608002*
Single tank, DTM04, with vent Single tank, DTM04, no vent Two tank, DTM08, no vent
SLD 000350 SLD 000355 SLD 230930* SLD 310684* SLD 230272
22" probe cap, w/vent 22” probe cap, no vent Flex probe kit 22” Flex probe kit 45” 3" universal mounting kit
Accessories
Outstanding flexibility maintains full inside diameter even around tight corners. Clamps easier than other hoses for airtight connections. ▪▪50 feet per box ▪▪Sold by the foot SLD 345650 5/8” SLD 341628 3/4” SLD 341145 1” SLD 341116FT 1-1/2"
* Request Items
SeaLand Flush Warning Panel Simple one light warning panel for flush ready status.
SeaLand Odor-Safe Plus Sani-Hose
SLD 318714*
The best hose on the market. ▪▪50 feet per box ▪▪Sold by the foot
* Request Item
SLD 342871FT 1-1/2"
230310
SeaLand Tank Monitors
Top rated by Practical Sailor
230312
SeaLand Tankwatch No more overfilling your holding tank. Highly reliable micro float switch activates a red warning light when tank is full. No electrical components come in contact with waste - no messy probes to clean. Easy to install on any rigid tank material. ▪▪Operates on 12V ▪▪Includes micro float switch, panel and gasket ▪▪Panel: 2" x 3-1/4"
230311 230313
SLD 002311
Complete kit
SLD 230278
Float switch only
Parts: 238798
231104
238802
231425
231161
341513
SeaLand PVC Hose Fittings These 1-1/2" hose barbs are smooth on the outside which makes for a better seal between the hose and the fitting, and allow removal of the hose for servicing the plumbing system. All fittings require priming and gluing. SLD 341513 1-1/2" Custom hose adaptor SLD 231104 45º Street elbow SLD 231425 Use with hose adaptor or PVC pipe SLD 231161 PVC 90° street elbow SLD 230312 Hose adaptor includes 341513 SLD 230311 90° sweep elbow includes adaptors SLD 230310 Hose mender kit SLD 238802 Tee kit includes adaptors SLD 230313 Double bend kit includes adaptors SLD 238798 “Y” kit includes adaptors
135
SeaLand / Viking
▪▪Visible gas level ▪▪Non-corrosive 3 layer composite ▪▪Ergonomic easy carry handles ▪▪36% lighter than steel ▪▪DOT approved ▪▪Pre-purged cyclinder
W
▪▪Made of 100% recycled fibre ▪▪Rapidly disintegrates to help keep sanitation systems flowing freely ▪▪For use in all portable and permanent toilet systems ▪▪Four rolls packed in a reusable storage bag
E
Viking Fibreglass Propane Tanks
N
SeaLand Biodegradable Toilet Tissue
SLD 441204 Single ply SLD 441205 2-Ply
▪▪Cleans toilets and controls tank odours ▪▪Rapid dissolving 2 oz packet effervesces in water ▪▪Won't harm plastic bowls or rubber seals ▪▪Nontoxic, nonstaining formula contains 100% biodegradable granules ▪▪Enzymes break down waste and tissue ▪▪1 packet treats a 40 gallon tank SLD 711202
56.7 gr, 12/pkg
SeaLand "MAX Control Advanced" Holding Tank Deodorant After years of research and development of “ecofriendly” alternatives to tank deodorants that use harsh chemicals, Dometic announces a breakthrough with new Max Control Advanced Products. With a powerful non-formaldehyde formula, Max Control Advanced provides the same odour control as the current Max Control (formaldehyde) product SLD 700029 SLD 700028 SLD 700026
8 oz liquid x 4/pkg 1 litre 1 gallon
SeaLand Bowl Cleaner Household toilet bowl cleaners often contain chlorine solvents or caustic chemicals which will deteriorate your toilet’s rubber seals and eventually cause water leaks. Specially formulated for RV and marine toilets ▪▪Cleans in two minutes ▪▪Environmentally safe ▪▪Thick formula uses 20% less SLD 721601
473 ml (16 oz)
Net Propane
Dia
O.L.
PRP 1420-0011
11 lbs
12"
15.24"
PRP 1420-0017
17 lbs
12"
18.1"
Part #
Appliances / Sanitation
SeaLand Clean 'n Green Cleaner & Deodorant
136
Webasto N
Appliances / Sanitation
Webasto Hi Output Diesel Air Heaters ▪▪Quiet operation ▪▪Fresh-air or recirculated air-intake ▪▪Sealed control electronics and connectors ▪▪Precise electronic temperature control system to maintain a constant cabin temperature through stepless modulation ▪▪Continuous heat output provides the exact temperature desired ▪▪High air flow output due to powerful radial blower ▪▪Very low electrical power and fuel consumption ▪▪Robust composite casing, resistant to high temperature or salt WEB 5000699D WEB 5001450A WEB 5001461A*
* Request Item
Air Top 2000 ST Air Top Evo 3900 Air Top Evo 5500
DIY Kit Includes: ■ Heater and Controller ■ Fuel Pump in Enclosure ■ Ducting and Connectors ■ Mounting Bracket and Hardware
Evo M Controller w/Air Top Evo 3900 & 5500
■ Thru-hull exhaust fitting ■ Fuel Line ■ Exhaust Water Trap ■ Documentation
SMAR Temp Controller w/Air Top 2000 ST
Webasto Air Heaters listed below are all-inclusive DIY Air Heater kits. Air Top 2000 ST 5000699D
Air Top Evo 3900 5001450A
Air Top Evo 5500 5001461A
3,000 – 7,000 Btu
5,100 – 12,000 Btu 13,3000 Btu
5,100 – 17,000 Btu 18,700 Btu
0.03 - 0.06 g/h (0.12 – 0.24 l/h)
0.04 – 0.11 g/h (0.17 – 0.42 l/h) 0.12 g/h (0.47 l/h )
0.04 – 0.15 g/h (0.17 – 0.60 l/h ) 0.17 g/h (0.66 l/h)
46 cfm (78 m3/h)
82.4 cfm (140 m3/h) 91 cfm (155 m3/h)
117.7 cfm (200 m3/h) 129.4 cfm (220 m3/h)
14 – 29 W
15 – 40 W
15 – 95 W
5.7 lbs (2.58 kg)
13 lbs (5.9 kg)
13 lbs (5.9 kg)
12.5" x 4.78" x 4.84"
16.65" x 5.83" x 6.38"
16.65" x 5.83" x 6.38"
SMAR Temp
Evo M Controller
Evo M Controller
Sailboat Sizing
22' - 28'
28' - 34'
35' - 38'
Powerboat Sizing
20' - 24'
24' - 30'
30' - 34'
Heater Output PLUS Mode Fuel Consumption PLUS Mode Air Flow (against 0.5 bar) PLUS Mode Rated Power Consumption Net Weight Dimensions (L x W x H) Controller
Parts:
WEB 50487171A
In-line fuel filter
W E
Webasto Marine Air Heaters provide a better solution to boaters who require the ultimate in compartment and cabin heating. Operating up to 20 hours on a single gallon of fuel, Webasto Marine Air Heaters are quiet and a powerful source of heat on any vessel.
Maintenance
137
AWAB
138
BOATLIFE
138
CAPTAIN TOLLEY’S
140
EPIFANES
140
FORESPAR Lanocote & Marelube
141
LIFE SAFE
141
McLUBE
144
RESCUE TAPE
144
SHURHOLD
145
SYSTEM THREE
148
TEAKDECKING SYSTEMS
151
TEAR-AID
151
WESTERN PACIFIC TRADING
151
138
AWAB / BoatLIFE AWAB 12MM Hose Clamps
AWAB Torro 9mm Hose Clamps
Part#
SAE Size
Min.
Max.
AWA 316024
15-24
8
5/8"
15/16"
AWA 316028
19-28
10
3/4"
1-1/8"
AWA 316032
22-32
12
7/8"
1-1/4"
AWA 316038
26-38
16
1-1/16"
1-1/2"
AWA 316044
32-44
20
1-1/4"
1-3/4"
AWA 316050
38-50
24
1-1/4"
2"
AWA 316057
32-57
28
1-1/4"
2-1/4"
Part #
SAE
Range
AWA NT09016-W4
2
5/16" to 5/8"
AWA NT09020-W4
5
1/2" to 13/16"
AWA NT09022-W4
6
1/2" to 7/8"
AWA NT09027-W4
9
5/8" to 1-1/16"
AWA NT09032-W4
12
13/16" to 1-1/4"
AWA NT09035-W4
14
7/8" to 1-3/8"
AWA NT09040-W4
17
1" to 1-9/16"
AWA NT09045-W4
20
1-3/16" to 1-3/4"
AWA NT09050-W4
24
1-1/4" to 2"
AWA NT09060-W4
30
1-9/16" to 2-3/8"
AWA NT09070-W4
36
2" to 2-3/4"
AWA NT09080-W4
42
2-3/8" to 3-1/8"
AWA NT09090-W4
49
2-3/4" to 3-9/16"
AWA NT09100-W4
56
3-1/8" to 4"
AWA NT09110-W4
61
3-9/16" to 4-5/16"
AWA NT09120-W4
68
4" to 4-3/4"
AWA NT09130-W4
74
4-5/16" to 5-1/8"
AWA NT09140-W4
80
4-3/4" to 5-1/2"
AWA NT09150-W4
86
5-1/8" to 5-7/8"
AWA NT09160-W4
93
4-1/2" to 6-5/16"
A heavy-duty, one-step powder cleaner that is ideal for restoring badly stained teak decks without sanding. Teak Brite cleaner should be applied to wet teak, scrubbed with a stiff brush and rinsed thoroughly with fresh or salt water. Will not harm seam compounds, fibreglass, plastic or vinyl.
AWA NT09170-W4
99
5-7/8" to 6-11/16"
BOA 1085
AWA NT09180-W4
105
6-5/16" to 7-1/16"
AWA 125-008 5/16" AWA 125-010 7mm
W
▪▪Flexible drivers for all clamp types
AWAB Narrow Clamps
E
AWAB Clamp Drivers
Dia. Inches
Range MM
N
Maintenance
Torro 304 stainless steel clamps offer several advantages over traditional perforated-band worm-gear style clamps: ▪▪Torro clamps are crafted entirely of AISI 304 Stainless Steel, rather than a composite of lesser alloys ▪▪Torro clamps have rolled-up band edges and solid bands, reducing the possibility of hose damage; the solid band of the Torro clamps eliminates cracks starting at perforations, extending the service life of the clamps when compared to perforated-band clamps ▪▪Can be used in environments with a moderately aggressive atmosphere and some risk of corrosion ▪▪9mm band width
Made from 316 stainless, the Awab series of clamps feature rolled band edges to eliminate the risk of hose damage. Extra wide threads of the band are stamped, leaving the nonperforated band smooth on the inside. Band and screw threads are properly pitched to virtually eliminate the chance of the clamp backing off due to vibration.
▪▪304 stainless steel ▪▪Band width is 3/8" AWA 319014 AWA 319017 AWA 319020
5/16” - 9/16”, each 7/16” - 11/16”, each 1/2” - 13/16”, each
BoatLIFE
BoatLIFE Teak Brite Cleaner
946 ml (26 oz)
Limited Quantity Shipping D.G.
BoatLIFE Teak Brite Brightener A time-saving one-step liquid brightener that is the second step in the Teak Brite care system, formulated to lighten and brighten your teak to a lighter shade. It is also used as an in between maintenance step to spruce up teak and keep it looking like new. Will not attack seam or bedding compounds. BOA 1087
950 ml (32 oz)
Limited Quantity Shipping D.G.
139
BoatLIFE BoatLIFE Teak Brite Teak Oil - Natural
BoatLIFE Life Seal
A deep, penetrating teak preserver that is the final step in complete teak care. It seals wood against grease, oil, and food stains while restoring natural oil and resins that are lost due to cleaning and exposure to the elements. Limited
A fast skinning (10 minutes) and fast curing (24 hours) polyurethane/silicone adhesive sealant. Designed specifically for fibreglass boats. Permanently flexible, non-shrinking. Outstanding adhesion to fibreglass, glass, plastic and wood. Can be used above or below water line.
BOA 1088 BOA 1089
Quantity Shipping
946 ml (26 oz) 3.78 litre (128 oz)
Part #
D.G.
BoatLIFE Life-Calk Polysulfide Sealant A one-part Thiokol polysulfide that cures to a positive waterproof seal. Resists oil, gas, brine, weather and most chemicals to stay seaworthy for years. Bonds to wood, fibreglass, metal, plastic and glass. Part #
Colour
30 ml
White
BOA 1030
83 ml tube
White
BOA 1031
83 ml
Black
BOA 1032
83 ml
Mahogany
BOA 1037
83 ml
Teak Brown
BOA 1033
315 ml cart
White
BOA 1034
315 ml
Black
BOA 1035
315 ml
Mahogany
BOA 1036
315 ml
Teak Brown
BOA 1161
83 ml tube
White
BOA 1162
83 ml tube
Black
BOA 1169
315 ml cart
Clear
BOA 1170
315 ml cart
White
BOA 1171
315 ml cart
Black
315 ml cartridge
Formulated to remove cured or uncured silicone, polyurethane, and adhesives. Good for clean up on hands, tools and equipment. Will not harm metals, fibreglass, gel coat, glass, plexiglas, etc.
E
N
BOA 1291 BOA 1288
29 ml (1 oz) 473 ml (16 oz)
W
General purpose solvent removes uncured polysulfide sealant and grease from tools and equipment. Ideal for the preparation of seams for caulking. Limited Quantity Shipping D.G.
BoatLIFE Empty Caulking Cartridge These 315 ml empty cartridges complete with end plungers provide a mess-free method of applying 2-part caulking compounds. BOA 1120
Clear
BoatLIFE Release Adhesive & Sealant Remover
Limited Quantity Shipping
BoatLIFE Life-Calk Solvent and Cleaner
473 ml (pint)
Clear
83 ml tube
BOA 1252
D.G.
BOA 1056
38 ml tube
BOA 1160
A one part fast curing teak deck seam sealant. It provides outstanding waterproofing and sealing qualities to wood decks made of teak and other woods. Teak Deck Sealant is fast skinning (30 minutes) and fast curing (24 hours). It combines the ease of use of a one part sealant with the outstanding performance of silicone rubber. The product is applied in a normal fashion and sands clean after curing to provide a smooth finish. It is unaffected by BoatLIFE Teak Cleaners and Teak Oils. It is also non-corrosive, so it can be used on any metal fittings on deck. The product remains flexible, and does not shrink, crack, or dry out. Black.
Improves adhesion of both one-part and two-part Life-Calk, especially on oily woods, teak and steel. Life-Calk Primer is a clear, fast-drying liquid and easy to apply. 230 ml (8 oz)
BOA 1109
BoatLIFE Teak Deck Sealant
BoatLIFE Life-Calk Primer
BOA 1059
Colour
Limited Quantity Shipping D.G.
BoatLIFE Fix Repair Putty Unlike similar products on the market, Fix is a non-sagging repair putty that cures like steel. Completely cured after 24 hours and can even be used underwater. Once cured, it can be drilled, tapped, sanded and painted. It bonds to fiberglass, wood, metal, glass and concrete and is impervious to oil, gasoline, alcohol, caustic detergent and salt water oxidation. Easy clean up with soap and water. Heat tolerant to 300° F. BOA 1196
16 oz
Maintenance
Size
BOA 1305
Size
140
BoatLIFE / Captain Tolley's / Epifanes Epifanes Rapidcoat & Rapidclear
The original cure for dry rot. A penetrating adhesive, flexible sealant that restores strength to rotted wood. By penetrating deeply and saturating rotted wood, the progress of dry rot is arrested and the subsequently cured mass is stronger than the original wood. Ideal for wood encapsulated by fibreglass such as transoms and stringers.
Quick and easy alternative to conventional varnish. ▪▪Easy application by brush, roller, or spray ▪▪Rapid drying ▪▪Great bonding to oily woods - like teak ▪▪No sanding between coats ▪▪Excellent water resistance ▪▪Great breathing properties and flexibility ▪▪U.V. Protection ▪▪Suitable for interior and exterior use ▪▪Semi-gloss finish Use Rapidcoat if you want a light tint added to the wood Use Rapidclear if you want zero tint, it is the perfectly clear product
118 ml (4 oz) 473 ml (pint) 946 ml (quart)
W E
Maintenance
N
BoatLIFE Fibreglass Powder Cleaner and Stain Remover ▪▪Use to remove heavy oxidation, stains, dirt, grease, and oil from fibreglass ▪▪No-scratch formula is completely harmless to gel-coat finishes ▪▪Use with fresh or salt water BOA 1190
Rapidclear - 750 ml Rapidcoat - 750 ml
Epifanes Rubbed Effect Varnish ▪▪Interior varnish that provides a rich satin lustre finish ▪▪Based on polyurethane alkyds ▪▪Apply as a final, finish coat over several build-up coats of clear gloss Epifanes varnish ▪▪Coverage: 140 sq. ft. per litre
737 g (26 oz)
EPI RE1000ML Litre W
▪▪Revolutionary high performance cleaner and ▪▪UV protectant; will not deteriorate graphics like other solvent-based waxes
E
N
Graphix Wax
BOA 1121 BOA 1124
EPI RCC-750 EPI RC-750
Epifanes Wood Finish Gloss ▪▪Formulated to give a high gloss finish (with excellent adhesion) to new teak and other (oily) exotic hardwood ▪▪Protection even in tropical climates ▪▪Sanding between coats is not required when the next coat is applied within 30- 72 hours ▪▪Coverage: 130 sq ft per litre
8 oz 16 oz
Captain Tolley's
EPI WFG-1000ML Litre
Epifanes Wood Finish Matte ▪▪Exterior/interior matte finish ▪▪Must be applied over properly prepared wood, using Epifanes Wood Finish Gloss
Captain Tolley’s Creeping Crack Cure ▪▪A water based sealant formulated to penetrate fine cracks ▪▪Uses capillary action to find leaks without dismantling ▪▪Sets to a clear, flexible and waterproof seal ▪▪Compatible with most materials, including glass, wood and metal
EPI WFM-1000ML Litre
CAP CTCC CAP 250-CTCC
EPI TPVB-500ML EPI TPVB-1000ML
Epifanes Thinners & Accessories Brushing thinner for all one-part Epifanes varnishes.
2 oz 250 ml
Epifanes
Thinner, 500 ml Thinner, 1000 ml
Spraying thinner for all Epifanes one-part varnishes. E N
EPI TPVS-1000ML
Spray thinner, Litre
W
Epifanes Clear Gloss Varnish ▪▪A clear, high gloss one-part varnish, based on tung oil, phenol and alkyd resin ▪▪Excellent exterior durability and ultra-violet filter ▪▪World famous for it's high gloss retention ▪▪Coverage: 150 sq. ft. per litre EPI CV-1000ML Litre EPI CV-500ML 500 ml
Accelerator, use to speed-up cure time of one-part Epifanes paints and varnishes. Use no more than 5% to preserve gloss. EPI APV-500ML
Accelerator, 500 ml
For thinning and cleaning all polyurethane Epifanes products. EPI PUTB-500ML EPI PUTB-1000ML
500 ml 1000 ml
W E
BOA 1063 BOA 1064 BOA 1065
N
BoatLIFE "Git" Rot
Forespar / Life Safe
141
Forespar Marelube
Forespar Lanocote Extremely effective in preventing and stopping corrosion on all types of metals Formulated to withstand salt water marine conditions, particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery. Applied during assembly, LanoCote will greatly assist in easy dismantling years later. Combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts, etc. FRS 770001 FRS 770003 FRS 770007
4 oz jar 16 oz jar 8 oz spray
▪▪Excellent dissimilar metals barrier for long term protection on fasteners such as stainless steel screws and bolts used on aluminum spars ▪▪Superior corrosion barrier and anti-seize for screws, bolts and nuts ▪▪Won't wash away! ▪▪High-load lubrication in a fresh or salt water environment ▪▪Use on turnbuckles and other rigging fittings ▪▪Great for rebuilding and maintaining outboard lower units ▪▪Formulated with 45% PTFE for maximum effectiveness ▪▪Nothing outperforms Marelube® Tef 45 ▪▪Many commercial and industrial uses ▪▪Contains no petroleum ▪▪ISO 9001 Certified FRS 770065 FRS 770066 FRS 770067
5 cc syringe 20 cc syringe 4 oz jar
Forespar Lanocote Prop & Bottom ▪▪Recommended for boats operating at speeds up to 15 knots ▪▪Can be applied with boat in the water ▪▪Environmentally safe ▪▪Flow efficient ▪▪Extensively tested coating for boat bottoms, props, struts, shafts and trim tabs ▪▪Depending on local conditions, LanoCote Prop and Bottom can significantly retard marine growth for over six months ▪▪It can be applied over clean, fresh bottom paint or a freshly clean bare bottom for added protection and to make regular cleaning easier and faster; also apply as above to clean metal surfaces. FRS 770035
16 oz
FRS 770050 FRS 770055
4 oz jar, paste 16 oz bottle, liquid
Forespar Marelube Extra All the features of Marelube above formulated to provide superior lubrication in wet conditions and keep moving parts mobile under load. FRS 770056
4 oz jar, paste
Forespar Tea Tree Power This mold mildew & odor eliminator is a natural air cleaner formulated especially for marine use. Blended using 100% Australian tea tree oil, it maintains healthy air quality and leaves a subtle, naturally clean scent throughout the boat. ▪▪Non-toxic and bio-degradable ▪▪Exceptional antiseptic and antimicrobial properties ▪▪Attacks and degrades airborne spores and penetrates porous boat surfaces to eliminate the odor source ▪▪Also an effective mold cleaner and mildew cleaner strong enough to tackle the damp marine environment FRS 770201 FRS 770202 FRS 770203 FRS 770207
2 oz gel 4 oz gel 8 oz gel 8 oz spray bottle
Life Safe
Life Safe Traction Tape Textured vinyl helps reduce the risk of slipping. LIF RE3954 LIF RE3955
2" x 15', Grey 2” x 15’, White
Life Safe Butyl Tape Butyl tapes help prevent and reduce costly water damage. Tough rubber, pressure sensitive mass, offers excellent adhesion to a variety of surfaces (no applicators required). Used to seal out: dirt, dust, moisture and water. •Easy to use in tape form LIF RE20761
3/4” x 1/8” x 20’
Maintenance
Forespar Marelube TEF 45
Specially formulated using advanced lubrication technology made for use in "Marine" grade valves, seacocks and any other marine parts that need periodic lubrication. Made from long-lasting PTFE Teflon-based lubricants. Designed to keep marine valve seals and balls working smoothly. Works on winches, hinges, tracks and other boat parts that need to move smoothly. Clear, non-staining and non-toxic lube that works equally well if fresh as well as salt water.
142
Life Safe
Life Safe Rigging Tape
Life Safe Boat Cover Reinforcement and Repair Tape
Rigging tape protects against chafing and sharp edges while providing extraordinary safety for sails, lines and rope ends.
An ideal way to prolong the life of your boat cover, this tape adds strength and tear-resistance along seams, stress points, creases and corners. This extra strong tape resists stretching, wrinkling and tearing. Use it as extra padding on stress points around windshields or trolling motors. Also great for bimini tops, sails, canvas awning, and pool covers.
LIF RE3866 LIF RE3867
1” x 15’, Black 1” x 15’, White
LIF RE1136
Life Safe Mast Boot Tape
Life Safe Super Seal Tape
Installing MastBoot does not require un-stepping the mast. It bonds itself into a solid piece of rubber offering protection against moisture. It conforms to irregular surfaces and leaves no sticky residue. White.
Works on wet, dry, greasy or dirty surfaces. Works on metal or plastic pipes. Use for plumbing, electrical or emergency repairs.
LIF RE3940 LIF RE3941
Maintenance
8-3/4” x 10’
LIF RE3869
4” x 40”, White 4” x 100”, White
Life Safe Hatch Tape For bedding in windows and deck fittings. Also used as an anti-vibration and water seal for engine hatch covers, etc.
Life Safe Sail Patch Tape Excellent resistance to tearing in any direction, very aggressive adhesive, works on damp sails. Transparent colour suitable on any sail type. Light weight and flexible. LIF RE3843
1" x 15'
LIF RE-3870
3/4" x 7'
3” x 40”
Life Safe Anti-Slip Grit Tape Durable in wet or dry conditions. Self-adhesive rolls are easy to use. Simply cut, peel and stick. Improves footing on frames during cleaning, maintenance and boat launching.
Life Safe Bimini Bandage Tape Excellent resistance to tearing in any direction, very aggressive adhesive, works on damp covers. Transparent colour suitable on any cover. Light weight and flexible. LIF RE3868
LIF RE36028 LIF RE36029
3” x 40”
1" x 15', Black 2" x 15', Black
Life Safe Traction Strips
3” x 40”
W
LIF RE1164
E
Self-adhesive kevlar scrim encapsulated in Mylar film. Ideal for repairs to kevlar and highperformance sails. Excellent resistence to tearing in any direction.
N
Life Safe Sail Kevlar Tape
Textured white vinyl helps reduce the risk of slipping. For safer footing everywhere… steps, ladders, ramps, basement stairs, boats, trucks, trailers, farm equipment, decks, skateboards, pools, docks, diving boards and campers. LIF RE3902WH LIF RE3906WH
1" x 12", 10/pkg 6" x 21", 8/pkg
Life Safe Rip Stop Sail Repair Tape
Life Safe Traction Tape
▪▪Adheres instantly on contact ▪▪Conforms to the shape of the sail ▪▪Prevents against sail chafe ▪▪2” x 15’
Textured vinyl helps reduce the risk of slipping.
LIF RE1140 White LIF RE1141 Black LIF RE1144 Green LIF RE1145 Gray
LIF RE3904BL LIF RE3897WH
6” x 21”, Black 4” x 9”, White
For Everything Under The Waterline
For Everything That Shines
Environmentally Friendly Speed Polish Use on: Any hull surface, outdrive, propeller, or fittings • Helps prevent marine growth and slime from adhering for weeks • Below-the-waterline high-gloss foul release polish • Reduces drag, increases efficiency on powerboats and sailboats • Easy wipe on/wipe off application onto any hull surface, outdrive, propeller, or fittings • Biodegradable, non-toxic, non-metallic, non-leaching, safe to use • Cleans, polishes and protects your hull with one easy application
Use on: Hatches, drawers, sliding doors, sail tracks, mast tracks and slides, engine lower units, propellers and bow thrusters, fishing reel components and fly line, sails, battens and telltales, slider cars and tracks
• Repels water, dirt, salt and contaminants • Reduces drag in air and water • Clean, dry and easy-to-use • Lasts up to 10 times longer than Teflon® additives, oil or wax-based lubricants
ANTIFOUL ALTERNATIVE
SAILKOTE™
High Performance Dry lubricant
ONEDROp™ Use on: Ball bearing traveler cars and battcars • Repels salt, dirt and other deposits • Protects, lubricates and conditions bearing surfaces • Reduces friction so balls to roll freely and evenly, greatly improving performance • Only one drop needed
• Cleans, polishes and protects • Reduces drag and repels water • Environmentally friendly citrus base • Long-lasting, high-gloss finish • Superior UV protection
Ball Bearing Conditioner Use on: Fiberglass, metal, plexiglass and painted surfaces
High Performance Speed Polish
HULLKOTE™
With new products from the team that brought you Sailkote™
For Everything That Slides
For Everything That Rolls
put the smooth back in sailing
Life Safe
144
McLube / Rescue Tape
McLube
Rescue Tape
Rescue Tape McLube SailKote
Maintenance
SailKote is specially formulated with Dupont Krytox, an easily applied environmentally friendly translucent liquid lubricant specifically designed for marine use. It dries quickly to a hard, smooth, ultra-slick, hydrophobic dry coating that bonds tenaciously to almost any surface. And because SailKote is a dry lubricant, it will not attract dirt or contaminants and will not transfer to other surfaces, or you. SailKote is typically five times as effective, and lasts much longer than, wax, oil or Teflon based lubricants. MCL SAILKOTE6OZ MCL SAILKOTE11OZ
113 gram, aerosol 312 gram, aerosol
McLube Onedrop ▪▪Keeps bearings rolling freely ▪▪Keeps bearings dirt-free ▪▪Prevents bearings from skidding ▪▪Only one drop needed MCL ONEDROP.5FLOZ
This environmentally-friendly, citrus-based polish deep cleans and protects your hull so it’s always in racing condition. Its long-lasting, high-gloss finish repels water to reduce drag for ultra-fast results. McLube HullKote applies easily over other waxes and polishes and is safe to use on fibreglass, metal, Plexiglas and painted surfaces. HullKote lasts more than a season when applied above the waterline, and more than 20 hard days of sailing when applied below. 16 oz
McLube Speed Polish Antifoul alternative combines McLube's same very fast, world-renowned proprietary formulation of our bonded PTFE suspension system with an entirely revolutionary citrus-based, long-lasting and high-gloss polish. ▪▪High-gloss, citrus-based foul-release polish for everything below the waterline ▪▪Prevents marine growth and slime from adhering for weeks ▪▪Reduces drag and increases efficiency on both power and sail boats ▪▪Easy to apply to any hull surface ▪▪Non-toxic, non-metallic, non-leaching ▪▪Biodegradable ▪▪Environmentally friendly MCL 7881
16 oz
RTP RT201201 RTP RT201202 RTP RT201203 RTP RT201204 RTP RT201205 RTP RT201206 RTP RT201207 RTP RT201208 RTP RT303601 RTP RT303603 RTP RT303604
1” x 12’ Black 1” x 12’ Red 1” x 12’ White 1” x 12’ Clear 1” x 12’ Yellow 1” x 12’ Blue 1” x 12’ Green 1” x 12’ Orange 2” x 36’ Black 2” x 36’ White 2” x 36’ Clear
RTP 24DISPLAY
24 Roll, assorted counter display
.5 oz
McLube HullKote
MCL HULLKOTE16OZ
▪▪Self-fusing ▪▪700 PSI tensile strength ▪▪Insulates 8,000 volts per layer ▪▪Withstands 500° F of heat ▪▪Remains flexible to -85° F ▪▪Creates a permanent air-tight, water-tight seal in seconds ▪▪Never gets gummy or sticky like electrical or duct tape ▪▪Has a long shelf life ▪▪Resists fuels, oils, acids, solvents, salt water, road salt, UV rays
Shurhold
145
Shurhold Broom Angled broom mop that attaches to handles. SHU 120
Shurhold Handles Handles are made from triple anodized, heat treated aluminum and quickly locks with all Shurhold accessories.
Shurhold Boat Hook Feature SHUR-LOK quick release adapter. Exclusive 3 in 1 boat hook that features a line carrying feature, centre push off, and a basic boat hook.
SHU 730 SHU 740 SHU 760
30" fixed length 40" fixed length 60" fixed length
SHU 833 SHU 855
72" telescoping, locks at 4 lengths from 43"-72" 108" telescoping, locks at 5 lengths from 63"-108"
SHU 130
Shurhold Mop
Shurhold Brushes 900 series brushes feature a hard wood base, premium bristles, wrap around safety bumper, flared bristles, and angled heads.
SHU 113
Shurhold Adapter SHU 950 SHU 955 SHU 960 SHU 970
Threaded adapter that is compatible with most internally threaded products.
6" stiff, white polypropylene bristles 6" medium, yellow polystyrene bristles 6" soft, yellow polystyrene bristles 6” extra soft, blue nylon bristles
SHU 101
E
N W
965
SHU 965
6" Combo soft/medium, red polystyrene bristles
Shurhold Swivel Pads and Scrubbers Swivel pad combo that includes swivel pad base with the SHUR-LOK adapter and synthetic lambs wool cover. SHU 1710C
Swivel pad base and SHUR-LOK adapter. SHU 1700
SHU 980 SHU 985 SHU 990
10" soft, yellow polystyrene bristles 10" medium, yellow polystyrene bristles 10" stiff, white polypropylene bristles
Application Brushes Great for windows, hulls, wheels, and other hard to reach areas.
SHU 310 8" nylon soft, blue nylon bristles SHU 308 8" soft, yellow polystyrene bristles
SHU 1703
Coarse scrubber pad (2 Pk)
Maintenance
All mops are oversized and feature the exclusive SHUR-LOK quick release adapter. Synthetic chamois mop, super absorbent.
146
Shurhold
Shurhold Marine Mate Brush & Handles
Shurhold PVA Sponge & Towel
For the budget minded customer who wants quality without the SHUR-LOK system.
PVA sponges absorb more than any other sponge, making for faster and more effective drying. The sponges prevent water spots on all surfaces, and resist mold and mildew.
7" Hardwood brush with safety bumper, and stiff polypropylene bristles mounted on a 48" threaded wood handle.
SHU 210
SHU 1950 Stiff
▪▪Absorbs 50% more than natural chamois ▪▪Extra large size: 17" x 27"
7" Hardwood brush with safety bumper, and soft flagged polystyrene bristles mounted on a 48" threaded wood handle.
SHU 220
SHU 1960 Soft
Shurhold Microfibre Towels
Shurhold Hand Held Brushes
3-Pack of towels includes: (1) Polish & Shine - Super soft (1) Wash & Wax, extra strong (1) Glass & Mirror - Lint free
Maintenance
Includes unique spot scrubber on handle. ▪▪L: 6" x W: 2-1/2" x H: 2" SHU 270
SHU 293
Utility brush
Shurhold Snap Stick
Soft comfortable handle and safety bumper. ▪▪L: 7-1/4" x 3-3/4" x H: 4.1/2" SHU 272
For snaps and zippers on awnings, straps and other items that suffer the corroding effects of rain, dirt and grime. One application from the Snap-Stick tube can last up to three months. Its special ingredients are non-toxic, biodegradable, and won’t harm fabrics, plastics or metals.
Scrub brush
Stiff chemical resistant bristles. ▪▪Head: 3-1/2" x 3-1/2
SHU 251
SHU 274 Short SHU 276 20" Dip & scrub brush
W
E
▪▪Cleans 1/2" - 1" rope ▪▪Ideal for boat line ▪▪Simple to use and store ▪▪Works on twisted & braided line ▪▪4" x 3"
Shurhold Hose Nozzle N
Shurhold Flexible Rope & Cord Brush
W
E
SHU 281 3/pkg
N
▪▪Blended pad is made from a high grade bronze metallic wool ▪▪Similar to a steel wool but ultra fine and rust resistant
The ergonomically-shaped, die-cast zinc hose nozzle body has a soft, black, vinyl grip for a comfortable hold. It includes a hold-open clip for a constant water flow and has a stainless steel spring SHU 288
SHU 273
Shurhold Bronze Wool
.45 oz
148
System Three System Three Resins T-88 Structural Epoxy Adhesive
System Three Cold Cure Epoxy
Maintenance
Bonds virtually everything, including wood, metals, concrete, and non-waxy plastics in cold, wet, hot and dry weather. Cold Cure Epoxy exhibits superior strength and bonding capabilities down to 2oC (35o F) even in moist and humid conditions. Cold Cure is ideal for gluing together unlike materials such as wood to metal or to plastics. Cold Cure is an excellent gap-filler and requires no clamping. gap-filler, putty, fairing compound. Cold Cure epoxy can be mixed with a variety of manufactured fillers to increase its viscosity for filling gaps and fairing surfaces. For grouting applications, Cold Cure can be mixed with sand or cement. SYS F1000K38 355 ml (12 ounce) kit SYS F1000K40 710 ml (1.5 pt) kit SYS F1000K42 1.42 litre (1.5 qt) kit
Limited Quantity Shipping D.G.
Temp °F/°C
Pot Life
Working Time
Cure Time (80-90%)
85 / 30
20 min
30 min
18 hrs
70 / 20
30 min
45 min
24 hrs
50 / 10
40 min
60 min
36 hrs
40 / 5
40 min
60 min
48 hrs
N.B. Cold Cure is hard at 80 - 90% cure time and 100% cure occurs in 5- 7 days.
T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials. Recommended Uses: Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures as low as 35°F. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided it is worked well into the surface. Mix Ratio by Volume.....................100:100 Mix Ratio by Weight......................100:83 Tensile Strength, psi......................7000 Flexural Strength, psi....................11,500 Coverage.......................................80 Ft 2/Gal Gel Time @ 77°F (25°C)..............60 Minutes (100g mixture) Full Cure @ 77°F (25°C).............4 - 6 Hours (100g mixture) SYS 1100K10
236 ml (8 oz) kit
SYS 1100K91
Universal cartridge, 250 ml (8.4 oz)**
**Mixing tips sold separately
*Note 2* Requires a high ratio gun, 12:1 or higher
Parts:
SYS S3660S99
► Larger sizes available on request
System Three G-2 Epoxy A solution to difficult gluing problems, G-2 Epoxy is specially formulated for the best possible bonding to resinous and acidic woods such as oak, teak, rosewood, and other tropical and exotic wood types where other glues fail. G-2 is an excellent all-around adhesive and provides a permanent, waterproof bond for all types of woods, metals, rocks and gems, concrete and non-waxy plastics. SYS F1110K38 SYS F1110K40 SYS F1110K42
355 ml (12 ounce) kit 710 ml (1.5 pt) kit 1.42 litre (1.5 qt) kit
Temp °F/°C
Pot Life
Working Time
Cure Time (80-90%)
85 / 30
20 min
30 min
18 hrs
70 / 20
30 min
45 min
24 hrs
50 / 10
40 min
60 min
48 hrs
N.B. G-2 is hard at 80-90% cure time and 100% cure occurs in 5 - 7 days.
► Larger sizes available on request
Mixing tips 6/pkg
System Three Resins Quick Cure Epoxy The standard quick setting “five minute epoxy” system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requiring a strong bond and rapid cure. Quick Cure is highly water resistant but not waterproof. Quick Cure is quite thick, but is easily measured by squeezing equal sized lumps from the convenient application bottles or from the UNI cartridge. Mix Ratio by Volume................100:100 Mix Ratio by Weight.................100:97 Gel Time @ 77°F (25°C).........2 - 3 Minutes (30g mix) Tack Free @ 77°F (25°C)........5 Minutes (30g mix) SYS 1000K10 SYS 1000K90
273 ml 50 ml syringe with 2 mixing tips (*Note 1)
*Note 1* Requires a dual cartridge gun (See below)
SYS 1000K91
Universal cartridge 250 ml (8.4 oz)**
**Mixing tips sold separately
*Note 2* Requires a high ratio gun, 12:1 or higher
Parts:
SYS S3660S99 Mixing tips 6/pkg (for universal cartridge) SYS 3610S90 Mixing tips, each (for 50 ml syringe)
► Larger sizes available on request
System Three System Three Silverthane Adhesive/Sealant ▪▪A two-part polyurethane sealant-adhesive ▪▪It cures overnight in any thickness to a very tough flexible rubber ▪▪Bright white and is unaffected by weathering and UV degradation ▪▪A tenacious bonder to many substrates including difficult to bond plastics ▪▪It is flexible at temperatures well below zero ▪▪Can be painted with most paints without surface preparation SYS 2100K06
120 ml (4 oz) tubes
SYS 2100K90
50 ml syringe with 2 mixing tips (*Note 1)
SYS 2100K91
252 ml (8.4 oz) cartrige with one mixing tip (*Note 2)
Parts:
SYS S3660S99 Mixing tips 6/pkg (for universal cartidges) SYS 3610S90 Mixing tips each (for 50 ml syringe) SYS 3600S90 Mixing gun (for 50 ml syringe)
System Three Resins SilverTip GelMagic A toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It is unique in that it starts as two self-leveling liquids, which form a soft, thixotropic, sag-resistant paste when mixed. Measuring is easily accomplished by either volume or weight. GelMagic requires no additional modification with fillers and can be applied to vertical and overhead surfaces without running. GelMagic exhibits exceptionally high peel strength and employs a state of the art, two-phase epoxy morphology, which creates an adhesive bond that is tougher, more resistant to embrittlement and has better elevated temperature properties than other room temperature cured epoxy adhesives. GelMagic can be post-cured up to 140°F for even greater performance. Coverage @ 250 microns (10 mils)........ 150 ft2/gal Gel Time @ 77°F (25°C)........................ 15 Minutes (100g mix) Tack Free Time @ 77°F (25°C).............. 3 Hours (100g mix) SYS 1230K40 SYS 1230K91
710 ml (1.5 pt) kit Gelmagic kit 190ml (6.4 oz) cartridge**
**Mixing tips sold separately
*Note 2* Requires a high ratio gun, 12:1 or higher
Parts:
SYS S3660S99
Mixing tips 6/pkg
► Larger sizes available on request
System Three Adhesive Dispensing Gun ▪▪Use with 50ml 2-part cartridges SYS 3600S90
System Three Resins SilverTip Epoxy A medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in woodcomposite boat building. Designed for use with fibreglass, Kevlar, Dynel, and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air. Both the resin and hardener are nearly colourless and are used in an easy 2:1 volumetric ratio. Fillers, wood flour, and bulking agents can be combined with SilverTip epoxy. Gel Time @ 77°F (25°C) Fast Hardener...............................26 Minutes (100g mixture) Slow Hardener..............................60 Minutes (100g mixture) Tack Free Time @ 77°F (25°C) Fast Hardener...............................3 Hours (100g mixture) Slow Hardener..............................6 Hours (100g mixture) SYS 0900A16 SYS 0900A24
946 ml (1 qt) Resin 3.78 litre(1 gal) Resin
SYS 0900B14 SYS 0901B14
473 ml (1 pt) 473 ml (1 pt)
Hardener fast Hardener slow
SYS 0900B20 SYS 0901B20
1.89 litre (.5 gal) 1.89 litre (.5 gal)
Hardener fast Hardener slow
► Larger sizes available on request
System Three Resins MirrorCoat MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some plastics. MirrorCoat cures to a glossy, smooth finish that is scratch and stain resistant. Cured MirrorCoat is waterproof and unaffected by alcohol. Mix Ratio by Volume...................100:50 Mix Ratio by Weight....................100:54 Coverage @1.5 mm (60 mils).....25 ft2/Gal (0.6 m2/L) Gel Time @ 77°F (25°C)............90 Minutes (100g mixture) Full Cure @ 77°F (25°C)...........48 Hours (100g mixture) SYS 0500K40 SYS 0500K42
710 ml (1.5 pt) kit 1.42 litre (1.5 qt) kit
► Larger sizes available on request
Maintenance
*Note 1* Requires a dual cartridge gun (See below) *Note 2* Requires a high ratio gun, 12:1 or higher
149
150
System Three
W E
SculpWood paste is a 2-component, spreadable, waterproof paste for filling cracks and defects in rot-damaged wood. It spreads easily; won't sag, drag or pull. An excellent companion for Sculpwood Putty where filling cracks is needed. SYS 1610K16
Small, 4" x 2-3/4" Large, 5-3/4" x 3-1/2"
System Three S-1 Epoxy Sealer
N
Maintenance
SYS 3540S99 SYS 3541S99
237 ml (8 oz)
System Three Sculpwood Epoxy Paste Kit
W E
W E
Epoxy will not stick to these re-usable polyethylene squeegees. These can be cut and trimmed to make filleting tools and even notched with pinking shears for spreading epoxy glue over large areas.
SculpWood putty is a 2-component, solvent free, kneadable epoxy resin putty. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails. It is most commonly used in conjunction with System Three RotFix, a low viscosity wood sealer and consolidant. SYS 1600K10
System Three Squeegees
N
N
System Three Sculpwood Epoxy Putty Kit
946 ml (1 qt)
S-1 Epoxy is a 50% solids epoxy/ polyamide system. S-1 contains a special blend of solvents which provide the lowest possible viscosity along with the longest allowable pot life. S-1 Epoxy is designed specifically as a waterproof primer for all types of substrates. S-1 Epoxy is excellent for preserving and prolonging the life of woods, concrete, metals and fibre-reinforced polyester. SYS F1400K20 SYS F1400K50
1.89 litre (1/2 gal) kit 7.6 litre (2 gal) kit
► Larger sizes available on request
System Three Accessories System Three Resins Rot Fix An ultra-low viscosity, penetrating sealer for hardening and solidifying rot damaged wood. ▪▪100% solids formulation is low odour and solvent free ▪▪Flows like water for superior penetration into wood and most porous materials ▪▪Two part system features an easy 2:1 mixing ratio ▪▪Apply by pouring or brush ▪▪Reliably cures at temperatures as low as 35°F ▪▪Can be used on damp wood ▪▪Use to harden soft, “punky”, wood as a base for further repair ▪▪Seals wood permanently to prevent future moisture penetration SYS 1500K40 SYS 1500K42
710 ml (24 ounce kit) 1.42 litre (1.5 quart) kit
System Three Resins QuikFair QuikFair is a lightweight, micro-balloon-filled, fast-curing twopart epoxy fairing putty with excellent moisture resistance. The two colour coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third colour. At 70°F, QuikFair is sufficiently cured to be hand-sanded in 3 hours or machine sanded in 4 hours. Recommended on both fibreglass and wood-epoxy boats above or below the water line. Mix Ratio by Weight......................100:50 Mixed Colour................................Tan Gel Time @ 77°F (25°C)..............10 Minutes (100g mix) Tack Free Time @ 77°F (25°C)....3 Hours (100g mix) SYS 1400K06 SYS 1400K40 SYS 1400K42 SYS 1400K46
133 ml (4.5oz) kit 710 ml (1.5 pt) kit 1.42 litre (1.5 qt) kit 1.5 Gallon kit
► Larger sizes available on request
SYS 3003S99 SYS 3010S99 SYS SYRINGE SYS STIR STICK SYS 3001S99
Disposable mixing cups 1 quart mixing tub 60 C.C. syringe Wooden stir/mixing stick 3 oz mixing cups, 100/pkg
Teakdecking Systems / Tear-Aid / Western Pacific Trading Teakdecking Systems
151
Tear-Aid N W E
Teakdecking Systems Teak Caulking A one-part, Silane Polymer system which when exposed to moisture in the air reacts to form a tough, flexible solid rubber compound. TDS Teak Caulking is a thixotropic material that does not sag during cure, and, when cured, has excellent temperature stability and chemical resistance. Because the sealant is neutral cure, it is noncorrosive to all substrates. ▪▪Tack free time: 20-40 minutes ▪▪Tensile strength: 300psi ▪▪Elongation: 350% ▪▪Shelf life: 18 months Size
Colour
305 ml cartridge
Black
TDS SIS440-W
305 ml cartridge
White
TDS SIS440
600 ml sausage
Black
Teakdecking Systems Fitting Epoxy A custom blend of high quality epoxy resins, activators and additives formulated for outstanding adhesion to common marine substrates such as fibreglass, wood, aluminum and steel. Developed as a ‘tough’ adhesive capable of enduring the flexing yachts undergo at sea, FE180A has special additives that enhance internal strength, bond strength and viscosity control under a variety of adverse environmental conditions. TDS Fitting Epoxy is also DOT (US Dept. Of Transportation) certified to be non-corrosive and is designed not to harm the environment. ▪▪Approximate coverage: 30 ft2 TDS FE180A
1:1 ratio, 7.56 litre (2 gallon) kit
▪▪Air & watertight - under pressure even when stretched ▪▪Instant adhesion - with no sewing ▪▪Elastic - conforms to irregular surfaces ▪▪Peel & stick ▪▪UV resistant ▪▪Type A: sticks to canvas, most fabrics, rubber, neoprene, most plastics, nylon, fiberglass, stainless steel, aluminum, polyethylene, polypropylene and non-oiled leather ▪▪Type B: Sticks to vinyl and vinyl-coated materials. Has unique adhesive that resists the oils in vinyl ▪▪Kit contains: (1) 3"x12" TEAR-AID patch, (1) 7/8" square patch, (1) 1 3/8" square patch, (1) 12" Reinforcement filament for repairing tears at edges. (2) alcohol prep pads, (1) illustrated instructions and product repair list TEA D-KIT-A01-100
Fabric, type A
TEA D-KIT-B03-100
Vinyl. type B
Repair Tape Counter Display ▪▪15 Vinyl repair kits ▪▪5 Fabric repair kits TEA D-CASE-V10-005
Video Counter Display with Product ▪▪15 Vinyl repair kits ▪▪5 Fabric repair kit TEA CASE-V21
▪▪ Sound ON/OFF switch ▪▪ Wireless remote ▪▪ Sales and application clips ▪▪ 16 Minute run loop with 11 different industry clips
Western Pacific Trading
Teakdecking Systems Teak Cleaner Even though ECO-100 teak cleaner powder contains no acid, caustic sodas and phosphates, it is a very powerful and effective cleaner that cleans and brightens without removing the soft fibers of your teak. It mixes easily in water and is designed to not harm your teak, caulking, hardware or paint. ▪▪100% Environmentally safe: Non-toxic (The ONLY U.S. EPA recognized teak cleaner) ▪▪Concentrated - Dilute with water ▪▪No acid, caustic sodas or phosphates ▪▪Removes mold & mildew stains ▪▪Tough on dirt, gentle on teak ▪▪Economical cleaning solution ▪▪Cleans & brightens TDS ECO-100-2
2 lb
Western Pacific Trading S/S Locking Wire Clam packed in 10’ coiled lengths or in a 1 lb. feeder box. WPT 30085 WPT 30086 WPT 30087 WPT 30088
.032 x 10’ coil .041 x 10’ coil .032 x 1 lb box .041 x 1 lb box
Western Pacific Trading Bronze Wool ▪▪Quality bronze wool in 3 grades ▪▪3/pkg WPT 35000 Fine WPT 35005 Medium WPT 35010 Coarse
Maintenance
Part #
TDS SIS440-B
Tear-Aid Repair Tape
Paddle Boats
Inflatable Boats
Power Boats
Sail Boats
Versatile, Easy-to-Use Mounting System and Accessories for Leisure and Adventure Sports on and off the Water
Boating Parts & Accessories
153
BECKSON
154
BOATMATES
158
CAMCO
160
DECK-GUARD
161
GARELICK Deck Chairs
161
GREEN MARINE
161
INTELLISTEER
163
LELAND
165
LENCO
164
MARELON
166
MATWORKS
169
MOBRI
169
RAILBLAZA
170
SSI SAILING SPECIALTIES
177
SOUNDOWN
177
STAINLESS OUTFITTERS
177
SWIVL-EZE
177
TRANSAT STAINLESS
178
TURNING POINT
184
VAAVUD
190
WATERLINE DESIGN
192
WEATHERFLOW
190
WEATHERHAWK
191
154
Beckson Beckson Screw-Out Deck Plates
Beckson Holding Clips These clips are nonconducting, nonmagnetic and noncorrosive making them perfect for indoor or outdoor use. This safety design reduces the potential hazard for injury present with pointed or sharp edged metal clips. 1/8” holes are used on 3/4” centres for all sizes. ▪▪Uses #6 flat head fasteners ▪▪2/pkg
Boating Parts & Accessories
Part #
Colour
Range
BEC CLP-1/4”
Black
1/4” - 5/16”
BEC CLP-1/4”W
White
1/4” - 5/16”
BEC CLP-1/2”
Black
3/8” - 1/2”
BEC CLP-1/2”W
White
3/8” - 1/2”
BEC CLP-3/4”
Black
5/8” - 7/8”
BEC CLP-3/4”W
White
5/8” - 7/8”
BEC CLP-1”
Black
7/8” - 1-1/8”
BEC CLP-1”W
White
7/8” - 1-1/8”
BEC CLP-1-1/4”
Black
1-1/8” - 1-3/8”
BEC CLP-1-1/4”W
White
1-1/8” - 1-3/8”
BEC CLP-1-1/2”
Black
1-3/8” - 1-5/8”
BEC CLP-1-1/2”W
White
1-3/8” - 1-5/8”
BEC CLP-1-3/4”
Black
1-5/8” - 1-7/8”
BEC CLP-1-3/4”W
White
1-5/8” - 1-7/8”
BEC CLP-2”
Black
1-7/8” - 2-1/8”
BEC CLP-2”W
White
1-7/8” - 2-1/8”
Beckson Clipmate Holders This unique design and tempered B-Flex plastic material make Beckson’s clips the perfect way to hold brooms, racks, pumps, flashlights, tools, blueprint tubes and other round objects neatly in place. The patented leg design provides permanent holding spring action unlike metal or other plastic clips, which ultimately become fatigued. Corrosion is nonexistent. ▪▪Sold in pairs ▪▪White ▪▪Use #6 pan head fasteners BEC CM-3/4 BEC CM-1 BEC CM-1-1/2 BEC CM-2
11/16” - 7/8” 7/8” - 1-1/8” 1-3/16” - 1-1/2” 1-1/2” - 2”
Designed to provide access without the use of tools with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a selfaligning centre and an innovative gasket to assure a watertight seal. A patented back-up sealing wall leaves the plate waterproof, even if the gasket is removed. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Deck plates also are used for access, inspection, and clean out for tanks and compartments. Part #
Size
Outside Dia.
Colour
Inside Dia.
Cutout
BEC DP40-B
4”
Black
6-1/8”
4”
4-1/2”
BEC DP40-W
4”
White
6-1/8”
4”
4-1/2”
BEC DP40-WC
4”
Clear
6-1/8”
4”
4-1/2”
BEC DP60-N
6”
Beige
8-1/8”
6”
6-1/2”
BEC DP60-W
6”
White
8-1/8”
6”
6-1/2”
BEC DP60WC
6”
Wht/Clear
8-1/8”
6”
6-1/2”
BEC DP80-N
8”
Beige
10”
7-5/8”
8-1/2”
BEC DP80-W
8”
White
10”
7-5/8”
8-1/2”
Parts: BEC D4S-G* BEC D6S-G
* Request Item
4” Gasket only 6” Gasket only
Beckson Pry-Out Deck Plate These pry-out plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid diamond pattern. The nonskid pattern extends across the centre, eliminating the edge ring that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. Part #
BEC DP65-W
Size
Colour
Outside Dia.
Inside Dia.
Cutout
6”
White
8-1/8”
6”
6-1/2”
Beckson Twist-Out Deck Plate Designed to conceal mounting fasteners under the quick twist cover. The low profile cover is self-centering, features uniquely styled finger grips and quickly locks in place with a 1/8 twist. Three separate sealing rings assure a watertight closure. Plates are molded of highimpact, marine quality plastic, with ultraviolet inhibitors for prolonged service. ▪▪Use #8 FH fasteners Part #
BEC DP50-W
Size
Colour
Outside Dia.
Inside Dia.
Cutout
5”
White
7”
5”
5-1/2”
155
Beckson Beckson Vent-O-Mate
Beckson Air Scoop Vent
Powered by just a slight breeze, the Vent-O-Mate ventilator automatically exhausts stale, hot and moisture-laden damp air from inside a closed boat to help eliminate mildew and keep odours from accumulating. No need to wonder why your solar powered vent is not working. Wind moving over the open grill on top creates a partial vacuum that literally sucks air out of the boat - removes 350 cu. ft. of air per hour with a breeze of only 6 mph. That’s enough to completely change the air in a 30’ sailboat in about an hour. Vent-O-Mate is also ideal for adding ventilation to heads, galleys, and forepeaks to help prevent mildew damage to interior wood and cabinet work. Install over anchor locker to dry wet line and prevent musty odours below. A clear shield on top permits light to enter and the vent can be closed from the inside during chilly weather to retain cabin heat. Water tight. ▪▪Overall dim: 7-3/4” ▪▪Dia: x 2-1/4” ▪▪Hole cut: 4”
Injection molded white ABS air scoops with white KORAD® cap to prevent cracking or discolouring. Molding snaps on and off the included deck mounted adapter. W: 5-1/2” x D: 6-1/4” x H: 2-1/2” BEC C-7
Beckson Rain Shields The external rain shield may be fastened by screws or by bonding to the exterior trim ring of opening ports. This will keep out rain, spray and provide shade. Projection from mounting surface is 2-1/2” (6.3 cm). ▪▪White For Port Sizes
Overall Dim
Hood Dim
BEC RS-12
Part #
5” x 12”
14-5/8”
12-3/4”
BEC RS-14
4” x 14” , 7” x 14”
6-3/4”
14-1/2”
Beckson Snap On Clam Vent
BEC RS-18
8” x 18”
20-1/8”
18.0”
▪▪Width: 5-1/2" (14.0cm) ▪▪Depth: 6-1/4' (15.9cm) ▪▪Height: 2-1/2" (6.4cm) ▪▪Adapters: Includes 4" hose adapter for use with VT-4 BEC C-8
Beckson Custom Ports Standard Sizes
Determining The Best Size: It is generally best to mount the largest port for the available mounting location for new installations. A larger port provides more light and better ventilation. Determining Style: The slope of the mounting location will indicate the type of port required, NEWPORT SELF DRAIN or NEWPORT RAIN DRAIN. Determining Required Spigot Length: Estimate the hull or cabin wall thickness at each mounting location as accurately as possible. Cabin wall thickness determines required port spigot length. Both styles come in standard 1” or 2” spigot lengths. ▪▪Opening ports are CE approved ▪▪Opening ports include screens & exterior trim rings ▪▪Fixed ports include exterior trim rings
Part #
Cutout
Outside
3 x 10
3-1/2” x 10-3/8”
5-1/2” x 12-3/8”
4 x 10
4-1/2” x 10-1/2”
6-3/4” x 12-3/4”
4 x 14
4-1/2” x 14-1/2”
6-3/4” x 16-3/4”
5 x 12
5-1/2” x 12-1/2”
7-3/4” x 14-5/8”
7 x 14
7-1/2” x 14-3/8”
9-3/4” x 16-3/4”
8 RD
8-1/2” Dia.
10-3/4” Dia.
Order Coding for Opening & Fixed Ports: Port
Type
Size
Style
Body Colour
P
O (Opening) F (Fixed)
Lens
Spigot Lengths
3” x 10”
- (Self Drain)
4” x 10”
D (Rain Drain)
W (White)
C (Clear)
Standard Lengths
B (Black)
S (Smoked)
10 = 1” (25mm)
B (Bronze)
4” x 14”
N (Beige)
5” x 12”
S (Silver)
Except 3 x 10 = 1.25” (32mm)
7”x 14”
G (Gold)
Note - Longer or shorter spigot lengths also available
8” RD
(Opening Only)
20 = 2” (51mm)
Examples: PO410DBS-10 = Opening port - 4” x 10” - Rain Drain - Black - Smoked Lens - 1” Spigot PF714-WC-20 = Fixed Port - 7” x 14” - Self Drain - White - Clear Lens - 2” Spigot
Boating Parts & Accessories
BEC C-6 White BEC C-6SS Stainless steel
156
Beckson
Beckson HT Series Access Hatches
Beckson Barrel Nuts
▪▪1/2” closed height ▪▪Weather-tight seal ▪▪Opens full 180° ▪▪Nothing to snag lines ▪▪One hand operation ▪▪Mounts vertical or horizontal ▪▪UV stabilized material ▪▪Invisible fasteners ▪▪Textured non-skid surface ▪▪Use #10 FH fasteners ▪▪Latches: 2 ▪▪I.D: 11-1/8” x 11-1/4 ▪▪O.D: 14-5/8” x 14-3/4” ▪▪Cut-Out: 11-3/4” x 11-3/4”
These nickel plated brass barrel nuts provide a low profile and secure installation. ▪▪Standard or flush mount ▪▪Shank diameter: .25” ▪▪Fastener size: 10-24 Overall Length
Finish
Mount
.375”
Chrome
Standard
BEC BB187-02-CHR
.50”
Chrome
Standard
BEC BB187-11-BLK
.375”
Black
Standard
BEC BB187-31F
.375”
Black
Flush
Part #
BEC BB187-01-CHR
Boating Parts & Accessories
BEC HT-1515-W
Beckson Winch Handle Holders
Beckson Round Fixed Port
For medium winch handles, top action. ▪▪8-1/2” x 3” x 2”
▪▪Identical in size, shape, style, mounting, and strength as the opening ports ▪▪White body, cleat lense ▪▪OD: 8-1/8” x Cutout: 6-1/2”
BEC HH-2 White
For large winch handles. ▪▪11” x 3.5” x 2.125”
BEC PF6RD-WC
Beckson Portlight Parts BEC PRK-AW BEC PRK-B BEC PRK-W BEC PRT-AB BEC PRT-B BEC PRT-W
Cam latch assembly - White Cam latch - Black Cam latch - White Black knob assembly 1/4”-20 Black twist knob 1/4” White twist knob 1/4”
BEC GK-310 BEC GK-410 BEC GK-414 BEC GK-512 BEC GK-714
Portlight gasket 3” x 10” Portlight gasket 4” x 10” Portlight gasket 4” x 14” Portlight gasket 5” x 12” Portlight gasket 7” x 14”
Beckson Portlight Screens BEC SCR310 BEC SCR410 BEC SCR414 BEC SCR512 BEC SCR714
3” x 10” Screen 4” x 10” Screen 4” x 14” Screen 5” x 12” Screen 7” x 14” Screen
Beckson Eye Strap ▪▪Black plastic eye strap ▪▪5/16 eye x L: 1.9” x H: 0.675” ▪▪Flat fastening surface is designed for a pop rivets or other flat fasteners BEC BKT-04S-BULK
Beckson Drain Plug ▪▪Self-cleaning thread design, O-ring, and center retaining legs to secure the center ▪▪Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. ▪▪Hole Cut 1” (2.54cm) BEC DP10-B
PRK-AW
HH-3
BEC HH-3 White
Beckson Can/Horn Holder PRT-W
PRT-AB
Safety-soft flexible PVC prevents injuries. Designed to hold beverage cans, bottles, air horns, etc. Uses screws to mount. ▪▪4.5” x 3” x 2.75” BEC HH-6 White
Beckson VHF Radio Holder ▪▪Ideal size for the large hand held radios ▪▪6” x 3” x 2” BEC HH-8 White
Beckson Cup Holders There is a generous cavity under the flange for caulking, allowing installation without fasteners. There are molded in standoffs on the bottom of the GH33 & GH43 holders to help prevent condensation build-up and keep containers from sticking to the bottom. GH43 will hold 1 litre bottles, and cans with foam insulating rings, as well as soda and beverage cans or glasses alone. BEC GH33W1 BEC GH43W1
3” x 3”, White 4” x 3”, White
Beckson Beckson “Handy Mate” Pumps
Beckson “Siphon Mate” Pump
Handy-Mate pumps can pump water out of bilges, sump tanks and from one tank to another, or pump oil from inboard or stern drive or engine crankcases when it needs changing. A tube is provided to insert into the dipstick hole and the oil is quickly pumped out. The especially versatile 216PC pump come with a kit of tubes, hoses, reducing foot and adapter. The Handy Mate will not rust or corrode, is non-sparking for safety, and requires no priming to start pumping action. The pump body has a diameter of 1-1/2” and it is fitted with a comfortable molded handle for easy, no-strain operation.
Use for diesel, oil or water, this unit lifts 4 oz (.12 L) per stroke. Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120°F (49°C) nor solvents that will attack PVC. ▪▪Length: 11-1/2” x diameter: 1-1/4”
Part #
BEC 212PGA
Tubes
12-3/4”
Intake: 1/4” x 30” Intake: 1/2” x 20” Discharge: 1” x 10” (oil)
16”
Intake: 1/2” x 36” Intake: 1/4” x 36” Flex discharge: 1-1/4” x 24” (water) Discharge: 1” x 10” (oil)
A Thirsty-Mate with extra reach. This pump can be permanently installed and will operate in any position. It comes complete with mounting brackets, intake hose and clamp, strainer, check valve and discharge hose. Ideal for small boats, engine compartments and much more. ▪▪Diameter: 1-3/4” (44 mm) ▪▪Length: 14” (35.6 cm) ▪▪Stroke: 12” (30.5 cm) ▪▪Gal/Min: 7.5 (28 L) ▪▪Outlet hose: 2’ (61 cm) ▪▪Intake hose: 6’ (1.8 m)
BEC 118PF
18”
1-1/4”
BEC 124PF
24”
1-3/4”
BEC 136PF6
36”
BEC 224PF
24”
BEC 230PF
30”
12”, Black 12”, White
Beckson Ship’s Logs
BEC MM503
All polyvinyl plastic, self priming, self lubricating, easy cleaning and will not corrode. Manufactured in the U.S.A. of the finest materials available. If your hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Strokes Per Gal
BEC SM-1B BEC SM-1W
Proven information packed format, just like our full-size log books, in a more convenient size for smaller boats. ▪▪Navy ▪▪5-1/2” x 8-1/2”
Beckson “Thirsty Mate” Pumps
Dia.
▪▪Heavy duty 3” wide tread for stepping surfaces ▪▪Self-adhesive backing ▪▪Will not crack or discolour ▪▪Sold in pairs
BEC MM403
BEC 315FP6
Length
Beckson Non-Slip Tread
A complete format for recording all information concerning your voyage and boat's operation. Pages for trip log, radio use, maintenance and guest register. ▪▪9” x 11-1/2”
Beckson Flex-A-Pump
Part #
BEC 109PC
Capacity
Hose
10
6 GPM
20”
6
10 GPM
24”
1-3/4”
4
13 GPM
72”
1-1/2”
7
8 GPM
24”
1-1/2”
6
10 GPM
32”
Boating Parts & Accessories
BEC 212PC
Length
157
158
BoatMates BoatMates Stainless Folding Beverage Holder
BoatMates GPS/Cell Caddy Holds most hand held GPS, cell phones and other small electronic devices. Mount with supplied suction cups or permanently mount with screws. ▪▪6" x 4.5" x 3.5" BOT 2134-1 White BOT 2134-8 Graphite
Boating Parts & Accessories
BoatMates Communications Caddy Holds most hand-held VHF radios and FRS's. ▪▪4.5" x 3.5" x 2.5" BOT 2135-1 White
BoatMates Stainless Cockpit Organizer Keep all those small personal items convenient and safe with the Tournament series cockpit organizer, fabricated from polished 304 grade stainless steel. This upscale organizer is great for fishing gear, binoculars and other personal items. Stainless mounting hardware included. ▪▪12.5” L x 4.5” W x 4.5” D BOT 2213-0
BoatMates Cockpit Organizer
The Tournament Series folding drink holder is fabricated from 304 polished stainless steel. The space saving folding design is also equipped with molded silicone fingers to adjust to the varying diameters of cans, cups, cozies and mugs. It also has a molded silicone “coaster” on the inside of the cover to reduce noise and to keep containers from sliding. Stainless steel mounting hardware is included, along with nylon sound dampening washers for positioning between the unit and the hull. ▪▪4.5” L x 5” W x 1” D (folded) BOT 2211-0
BoatMates Folding Drink Holder The new Folding Drink Holder features double-ring collar assembly capable of holding both cans and cans with cozies. With a new all-resin design, the drink holder won’t rust or corrode. Its injection molded, commercial grade resin provides superior durability, an attractive appearance and a longer, more reliable product life. The holder can be mounted with Tempress’ Super-Suction cups or screw mounted. BOT 2170-2 2/pkg
BoatMates Drink Holder Plus ▪▪Single drink holder ▪▪Suction cup fastening ▪▪6" x 4" x 4" BOT 2136-1 White *Sleeve not included
Holds fishing gear, binoculars, personal items such as bait, tools, knives, etc. ▪▪12" x 6" x 4" ▪▪Two suction cup mounting
BoatMates Drink Holder w/Sleeve
BOT 2133-1 White BOT 2133-8 Graphite
Holds a single drink with insulation sleeve. ▪▪3.6" x 3.5" dia
BoatMates Cruisin' Caddy Organizer that holds your beverage, personal items, lures, etc. Mounts vertically or on flat surfaces. Great for small boats with limited cockpit storage. ▪▪12" x 4.5" x 3.5" ▪▪Two suction cup mounting BOT 2131-1 White
BOT 2150-1 White
BoatMates
159
BoatMates Stainless Rod Holders
BoatMates Underseat Gear Bag
This high-styled organizer has a place for your fillet knife, pliers, baits and a convenient shelf for extra line or scents. Stores two rods upright. The Tournament Series™ Rod Holders are an upscale alternative to teak or poly-board organizers. Fabricated from polished 304 stainless steel, with injection molded ABS inserts to protect valuable rods and tools. Stainless steel mounting hardware included. Packed in clear clamshell with mounting instructions. ▪▪11” L x 9.5” W x 3” D
Holds all mandatory safety gear, personal items and handheld electronics. This bag secures over the bench seat by a hook and loop strap fastener strip. Large main storage, two zippered mesh storage pockets in the front plus a covered pocket in the centre. Constructed of 600 denier polyester with UV resistant PVC lining.
BOT 2220-0 Double
▪▪13.5” L x 9.5” W x 3” D BOT 2221-0 Triple
3 Suction cups. 12" x 1.5" BOT 2110-1
35” L x 10” W x 9” D
BoatMates Seat Organizer Heavy mesh pocket organizer can be mounted on a back-to-back seat base or on the rear of flip-flop style seat. Made of commercial grade coated mesh and polyester materials. Snap fasteners for back-to-back seats and quick release straps for flip-flops. BOT 3129-4
29” L x 9.5” W x 3” D
BoatMates Utility Pouch
BoatMates Safety Gear Bag
Made from marine grade fabric. Store your hand held radio, G.P.S., cell phone, winch handle, etc. ▪▪Two suction cup mounting
Keep all your mandatory safety and emergency gear organized in this commercial weight ventilated bag. Holds 4 adult, and 2 childs' PFD's in main body, plus separate storage area in lid holds firstaid supplies, safety flares, distress flag, air horn, etc. Large mesh pocket in front for additional storage. Bag has heavy web carrying handles, nonskid feet on bottom, and grommet openings for drainage. Nylon, self-repairing zippers on bag and lid. D-rings on each end allow bag to be secured to deck on boat or dinghy. Safety equipment not included. Orange. ▪▪H: 12” x W: 21” x D: 15”
BOT 3105-4
10" x 11" x 2"
BoatMates Fender Cleats Quickly secure fenders with a lift and turn of the S/S cleat. Accommodates up to 3/8" line. ▪▪Length: 3-3/4" BOT 2201-2
BOT 3118-6
BoatMates Mesh Utility Bag Mesh bag holds a weekends worth of dirty laundry. Drawstring top keeps everything inside. Comes with a utility hook for hanging, either using the large suction cup, provided, or mount with screws. ▪▪14” x 20” BOT 3108-4
BoatMates Trash Bagger Easy to mount resin frame has a hinged cover to keep the contents from spilling. Mounts on any smooth surface with three super suction cups or can be permanently mounted. Uses the typical supermarket “tee-shirt” bags or kitchen trash bags. Bags included. BOT 2132-1 White
BoatMates Seat Pack This commercial grade organizer has a variety of places to store your gear. Large central pocket can hold foul weather gear, extra clothes or safty gear. Each smaller exterior pockets are sized to hold three 9” x 14” tackle trays (not included). Easily mounts over the top of most popular pedestal seats with heavy weight web straps and quick release nylon hardware. Large padded shoulder strap makes carrying to and from the boat effortless. ▪▪H: 19” x W: 13.5” x D: 6.5” BOT 3135-4
Boating Parts & Accessories
BoatMates Hook Rack
BOT 3128-8
160
Camco Camco Adjustable Broom ▪▪Telescopes from a full 52" down to 24" for storage ▪▪9-1/2" soft bristled head folded in for storage ▪▪Head adjusts to different angles for hard to reach areas ▪▪Dustpan clips onto broom handle for storage CAM 43623
No more broken glassware! Revolutionary polycarbonate glasses have the look and feel of real glass, and the advantage of being unbreakable. ▪▪Sold in boxed pairs ▪▪Dishwasher safe
Camco Collapsible Bucket ▪▪Opens easily to 9.25" tall & folds to less than 2" ▪▪Zippered storage bag included ▪▪3 gallon capacity
CAM 43945
Camco TastePURE Water Freshener ▪▪Eliminate algae and slime build-up from drinking water tanks ▪▪Keeps stored water fresh & odour free ▪▪1 oz for each 20 gallons of water CAM 40206
CAM 42993
Camco Collapsible Bag ▪▪Over 18” wide for ease of use with large wash brushes ▪▪Collapses to 2-3/4” tall to fit in its own easy to carry storage bag (included) ▪▪Extra-large 18-1/4” x 9-1/2” x 10-1/2” bucket has a 5-gallon capacity. CAM 42973
Camco Mini Dish Rack ▪▪Fits smaller sinks ▪▪Sloped drainer tray keeps counters dry ▪▪Drain tray snaps on top of rack for storage ▪▪9.25" x 11.5" CAM 43511
Camco Stack-A-Plate ▪▪Non-slip backing ▪▪Use in your cabinet to keep your plates organized, and to stop them from sliding and rattling ▪▪Set of two - one fits plates to 7-1/4"; the other to 10-1/4" ▪▪Dishwasher safe CAM 43603**
** Limited Quantity
W
9 oz Wine glass, 2/pkg 7 oz Tumbler, 2/pkg 7 oz Juice glass, 2/pkg 22 oz Beer glass, 2/pkg 10 oz Martini glass, 2/pkg
▪▪Small size makes it easy to keep this handy duo close at hand ▪▪Whiskbroom snaps into dustpan when not in use ▪▪Hanger-hole for convenient storage
E
CAM 43861 CAM 43871 CAM 43881 CAM 43891 CAM 43901
Camco Wisk & Dustpan
N
Boating Parts & Accessories
Camco Polycarbonate Glass Sets
Deck Guard / Garelick / Green Marine Deck-Guard
161
Garelick N E W
Garelick Mariner Folding Chair
GAR 48106-61
Garelick Designer Series Padded Deck Chair
Deck-Guard Ultrasonic Bird Repellers Deck-Guard is a simple, effective, environmentally-friendly solution to bird-related problems such as excrement and noise. Deck-Guard is solar powered, motion activated and maintenance free! Deck-Guard gets rid of birds while maintaining a clean, comfortable, enjoyable, bird-free environment. ▪▪Weatherproof: Sleek, weatherproof casing is designed to withstand years of outdoor use ▪▪Solar Panel: 2.5” x 2.5” ▪▪Motion Sensor: Built-in PIR activates when intruder moves into its coverage area ▪▪Motion Sensor Range: 30 ft ▪▪Power Supply: Solar with Nickel Metal Hydride Rechargeable Back-Up Batteries (5 year lifespan): 3 (AA) ▪▪Compliance: UL and CE listed ▪▪Dimensions: 4.5/8”H x 4”W x 3.1/4”D Predatory Bird Repeller Utilizes 8 different types of auditory distress calls to scare away a wide variety of birds. For bird-related problems resulting from large flock of birds roosting on docks, roof tops and other larger commercial properties. ▪▪8 different auditory distress calls which repeat when motion is detected ▪▪Protects up to 70 ft DGD DGP012169
Ultrasonic Bird Repeller Deck-Guard utilizes ultrasonic sound waves to frighten, annoy, and intimidate seagulls and other birds. ▪▪Ultrasound: Broadcasts at a frequency range of 10-20 Khz ▪▪Protects up to 30 ft DGD DG10081968
▪▪Lightweight, sturdy and very comfortable ▪▪One piece canvas back with 24” (61cm) high frame ▪▪1” thick foam padded back and thigh support for added lumbar comfort ▪▪Seat Height: 16" (41cm) ▪▪Double leg and front cross bar frame for stability, easy to stow ▪▪Beautifully sewn olefin woven fabric, tastefully appointed with embroidered code flag design and contrasting accent trim. ▪▪1” (3cm) diameter, corrosive resistant folding anodized aluminum tube frame, poly tips ▪▪Varnished hardwood arms ▪▪Navy blue with red trim GAR 35029-62
Green Marine
Green Marine Fuel Whistle The “Fuel Whistle” is a simple solution to prevent spills while fuelling. Provides an audible signal during fuel filling which stops when an overflow situation arises. Fits 5/8” fuel lines. ▪▪Fits all boats ▪▪Protects the environment ▪▪Easy one-time installation WES 204
Boating Parts & Accessories
▪▪Anodized frame resists the elements ▪▪Sewn cushions and arm rests ▪▪HDPE seat and back substrates resist rot and warpage ▪▪Eight legged frame provides extra stability ▪▪Firm resilient 3.5” (9cm) thick foam seat ▪▪Marine grade vinyl ▪▪Durable 1” (3cm) aluminum double leg frame ▪▪Chair folds for stowage, dual locks prevent folding during use ▪▪Seat size: W: 19" x D: 15-1/2" x W: 26"
Harken Hoisters
...steering has never been this easy
Intellisteer / L’il Sucker
163
E N W
Intellisteer Type A Existing Drive or Autopilot Kit Includes: ▪▪Wireless remote pendant & control module
Key Features:
Key Features: ▪▪Can be integrated with an existing autopilot system or standalone drive unit ▪▪When the Intellisteer Wireless Controller is steering it will disconnect the autopilot and provide wireless control from anywhere on the boat ▪▪When the Intellisteer Wireless Controller is not steering, the Autopilot will function as before IRS OCTAFINTWCFC
Intellisteer Type R For Outboards & Kicker (Trolling) Motors Kit Includes: ▪▪Includes wireless remote pendant & control module, remote drive, 6' steering cable, installation kit ▪▪Requires cable steering outboard connection kit Key Features: ▪▪Fits below decks ▪▪Electronic clutch disengages for manual steering ▪▪Rotary drive system ▪▪Safety override technology ▪▪Current 1.25A typical while steering, 5A max IRS OCTAFINTRFC
Intellisteer Type H For Hydraulic Steering Kit Includes: ▪▪Includes wireless remote pendant & control module, hydraulic pump, hydraulic hoses and fittings, installation kit Key Features: ▪▪Connects to all common hydraulic steering systems ▪▪Rugged Octopus hydraulic pump ▪▪Adds wireless pushbutton control of your hydraulic steering ▪▪Current 4-6A typical, 19A Max while steering ▪▪Suitable for cylinders up to 10ci (166cc) IRS OCTAFINTHFC
Intellisteer Wireless Remote Pendant ▪▪Extra pendant to use as a spare, as a second remote or to replace lost remotes ▪▪Water resistant ▪▪Supplied with 2 x 23A batteries ▪▪Includes neck lanyard ▪▪Handheld and receiver can be paired in field IRS OCTAFINTHHFC
Parts:
IRS OC15SUK31A
9.9 Mercury 4-stroke linkage arm STRB
Boating Parts & Accessories
Three different models add wireless steering to boats with: ▪▪Autopilots ▪▪Tiller steered outboards ▪▪Cable steering ▪▪Hydraulic steering ▪▪Wireless receiver module plus wireless handheld pendant steering in the palm of your hand ▪▪Up to two pendants can be used ▪▪Steer and fish from anywhere on the boat ▪▪Designed for push button control ▪▪Easy DIY installation - no need for professional installer ▪▪1 year limited warranty on electronics, 2 year limited warranty on drive units
164
Lenco Lenco Elastomeric Tactile Trim Tab Switch Kits Totally waterproof, maintenance-free, easy-to install tactile switches with an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where your trim tabs are at all times. ▪▪For single actuator systems only Kits include: • Self-contained sealed keypad • Control box • 36" Pigtail
Lenco Electric Trim Tabs
Boating Parts & Accessories
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Part #
Boat Length
Tab L x W
LEN 15000-101
14'-18'
9" x 9"
LEN 15001-101
16'-25'
9" x 12"
LEN 15007-101
17'-30'
12" x 12"
LEN 15008-101
26’ - 36’
12” x 18”
Standard Switch 124SSR ▪▪Self-contained, sealed keypad ▪▪Self-contained, sealed control box ▪▪Fade/smudge-proof, laser engraved graphics ▪▪Plug & play switch wiring harness connectors ▪▪Built-in Retract feature returns tabs to a fully retracted position when power or tachsignal is removed LEN 15069-001
12 VDC only
LEN 30134-001 LEN 30006-001D
Control box for 124SSR Replacement key pad
Parts:
Kit Contents ▪▪2 each of 12-gauge stainless steel trim tab blades ▪▪2 each of #15054-001 actuator with 6' leads and Deutsch plugs ▪▪2 each of #30133-103 20' actuator extension wiring harnesses ▪▪2 each of #15085-001 (116) upper mounting brackets with gland seal ▪▪2 each of #50014-001 (119) lower mounting brackets ▪▪1 each of the Lenco owner’s / installation manual ▪▪All necessary stainless steel mounting hardware ▪▪Switch kits sold separately
LED Indicator Switch 123SC All the features of the standard switch above PLUS:
▪▪2 high-intensity L.E.D. indicator displays show the exact position of your trim tabs at all times ▪▪Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in all light conditions ▪▪Backlit keypad graphics for optimum night viewing ▪▪24-volt compatibility LEN 15070-001
12 or 24 VDC
LEN 30072-001 LEN 30007-001D
Control box for 123SC Replacement key pad
Parts:
Switch kits sold separately
Edge Mount Trim Tab 12V Kits - No Switch Edge Mount actuators mount at the trailing edge of the plane, requiring 4” (10.16 cm) less transom height than Lenco standard mount trim tabs. ▪▪2 of 12-gauge stainless steel trim tab blades ▪▪2 of #15054-001 actuator with 6’ leads and Deutsch plugs ▪▪2 of #30133-103 20’ actuator extension wiring harnesses ▪▪2 of #15085-001 (116) upper mounting brackets with gland seal ▪▪2 of #50014-001 (119) lower mounting brackets ▪▪1 of the Lenco owner’s / installation manual ▪▪All necessary stainless steel mounting hardware Part#
LEN 15015-101
Tabs
Boat Length
Min. Transom Height
12” x 9”
14’ - 18’
11”
Lenco Double Rocker Switch 122 For Single Actuator Systems ▪▪Double Rocker Switch available for Standard Trim Tabs, Standard & HD Performance Tabs (single actuator sersions) ▪▪12 & 24 volt Kit Contents: ▪▪#122 Carling Double Rocker Switch ▪▪Deutsch Conntectors ▪▪36" Power Pigtail ▪▪Installation hardware included LEN 10222-211D
12 VDC only
Lenco / Leland Lenco RetroFit Kit
Leland
Lenco Marine’s RetroFit kit is designed as a direct replacement for the Bennett hydraulic pump. ▪▪Use existing Bennett trim planes, bracket and switch ▪▪Use all existing mounting holes Kit Includes: ▪▪2 electric actuators ▪▪2 upper mounting brackets ▪▪Switch jump wire kit ▪▪All mounting hardware
Note: Bennett Joystick control can not be retrofitted to the Lenco Actuators.
LEN 15064-001
LOA Retracted
LEN 20766-001 LEN 20770-001 LEN 20768-001
Leland Manual Re-Arm Kits ▪▪33GR CO2
LND 840AMU-85202Z MA7174/RKM6F LND V86160-85202Z MA7203/NRK1000
Stroke
LOA Extended
25"
8"
33"
29"
12"
41"
Leland Pins & Bobbins
25"
12"
37"
LND V85006-00006 LND V80040-00003
Accessories:
Single rocker switch for single HL Single rocker switch for dual HL
Parts:
LEN 50015-001D LEN 50014-001D
LND V85000-85202Z MA7270 LND V86000-85202Z MA7202 LND V90000-85202Z RKA6F LND V85000-86121Z 38ARP LND V85000-86202Z 38ARK
Stud upper bracket Stud lower bracket
Green Indicator Pins (6/pk) Yellow Auto Bobbins (3/pk)
Leland Xenon Strobe USCG approved, requires 1x 'D' cell alkaline battery to be replaced annually. Stainless locking pin attachment fits most foam filled and inflatable PFD’s. Three to four mile visibility at sea level operates at 50-60 flashes per min for 8-12 hours and then switches to 20-30 fpm for another 8-12 hours. ▪▪Omni-directional 360° view pattern ▪▪More powerful than LED bulbs ▪▪Waterproof and rugged ▪▪D-cell battery (not included) for up to 24 hours LND 60646M
Leland Rust Prevention Bags Reusable poly bags with an interior lined with corrosion inhibitors which prevent rust on steel tools and parts without using damaging oils. Protected parts are easily removed from the bag and are ready for immediate use with no smell or residue. ▪▪3 Bags: 6” x 8”, 8” x 10” & 12” x 18” LND 90100
Boating Parts & Accessories
Lenco hatch lifts are made entirely of non-corrosive materials and are completely submersible. Inline motor design makes mounting easier and delivers over 750 lbs. of lift. Clutchless ball screw design always runs in sync on dual lift applications and never binds. Stainless steel ram locks in any position. Ballscrew spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors. Motor draws 5 amps @ 12 volts. Lifts install with a single power cable. Part #
Leland Auto Re-Arm Kits ▪▪Leland is a leader for high pressure disposable gas filled cylinders and related gas handling equipment in safety, food, medical and recreational products ▪▪They make over 250 variations of CO2 cylinders for inflatable vests ▪▪Approved re-arm kits and components for Mustang, Helly Hansen, Stearns & Nautilus
Lenco Electric Hatch Lifts
LEN 15096-001 LEN 15098-001
165
166
Marelon Forespar Thru-Hull Connectors Precision molded in high-strength noncorrosive Marelon®. Their great strength, light weight and complete freedom from corrosion and electrolysis make them ideal Thru-Hull Connectors and are available with or without strainers. ▪▪Threads: NPT
Marelon Ball Valves Component style ball valves are precision molded in high-strength noncorrosive Marelon. Their great strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline. Teflon seals are standard on all valves. ▪▪Threads: NPT Thread
Diameter
Length
Length w/ Handle
3/4"
1-7/8"
3"
4”
MPS 905102
1"
2-3/4"
4-3/4"
5-1/2”
MPS 905103
1-1/4”
2-3/4”
4-7/8”
5-3/4
MPS 905104
1-1/2"
3-1/2"
5"
7-1/2”
MPS 905105
2"
4-1/4"
5-7/8"
8”
Part #
Boating Parts & Accessories
MPS 905101
*NOTE The “S” notation in the model description denotes ThruHull Connectors that have been fitted with a strainer.
Flush Head Threaded Thru-Hull 250 MPS 906000 1/2" MPS 906001 S-1/2" MPS 906002 3/4" MPS 906003 S-3/4" MPS 906004 1" MPS 906005 S-1" MPS 906006 1-1/4" MPS 906007 S-1-1/4" MPS 906008 1-1/2" MPS 906009 S-1-1/2" *S Denotes Screened
Mushroom Head Threaded Thru-Hull 251
Marelon Seacocks Component style seacocks are precision molded in high-strength noncorrosive Marelon. Their great strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline. Teflon seals are standard on all valves. ▪▪Threads: NPT Thread
Height
w/handle
Base
MPS 904009
1/2”
3”
4”
3”
MPS 904010
3/4”
3”
4”
3”
MPS 904011
1-1/2”
5”
8”
6”
Marelon Thru-Hull Scoop Strainers These high speed, strainers are made of high-strength noncorrosive Marelon (available in white only). Forespar’s two-piece construction allows for greater ease in installation. ▪▪Threads: NPT Part #
MPS 906010 1/2" MPS 906011 S-1/2" MPS 906012 3/4" MPS 906013 S-3/4" MPS 906014 1” MPS 906015 S-1" MPS 906016 1-1/4" MPS 906017 S-1-1/4" MPS 906018 1-1/2" MPS 906020 2" MPS 906021 S-2" *S Denotes Screened
Mushroom Head Hose Barb Thru-Hull 253 MPS 906022 1/2" MPS 906023 S-1/2" MPS 906024 3/4" MPS 906025 S-3/4” MPS 906027 S-1" MPS 906070 1-1/8" MPS 906071 S-1-1/8" MPS 906028 1-1/4" MPS 906029 S-1-1/4" MPS 906030 1-1/2" MPS 906032 2" MPS 906033 S-2" *S Denotes Screened
Thread
A
B
C
D
MPS 906059
3/4"
1-1/32”
2-1/4”
1”
3-1/8”
Flush Head Threaded Drain 254
MPS 906060
1-1/4"
1-5/8”
2-15/16”
1”
3-3/8”
MPS 906034 2" MPS 906035 S-2" MPS 906036 1-1/2" MPS 906037 S-1-1/2" MPS 906038 1-1/4" MPS 906039 S-1-5/8" *S Denotes Screened
Parts:
MPS 906061 MPS 906062
3/4” Screen only 1-1/4” Screen only
167
Marelon Marelon Tapered Pipe to Hose Adaptors ▪▪Threads: NPT
Marelon 90° Male Pipe to Hose Adaptors Precision molded and then machined from high-strength noncorrosive Marelon making them light in weight as well as completely free from corrosion and electrolysis. They are ideal as replacement parts for conventional plumbing components and are your best choice for new installations. ▪▪Threads: NPT A
B
C
D
E
1/2"
5/8"
7/16”
2”
1-1/2”
MPS 901001
3/4”
3/4”
1/2”
2-1/8”
1-5/8”
MPS 901003
1-1/4”
1-1/4”
7/8”
2-3/4”
2-5/16”
MPS 901004
1-1/2”
1-1/2”
1-1/16”
3-1/4”
2-3/4”
MPS 901005
2"
2"
1-1/2”
3-5/8”
3-1/4”
1/4” x 1/4” 1/4” x 5/16” 1/4” x 3/8” 1/4” x 1/2” 3/8” x 3/8” 3/8” x 1/2” 1/2" x 1/2" 1/2" x 3/4" 3/4" x 1/2" 3/4” x 3/4” 3/4” x 1” 1-1/4" x 1-1/2"
Marelon Female Threaded Barbed Hose Fittings MPS 901014 MPS 901015 MPS 905014
Boating Parts & Accessories
Part #
MPS 901000
MPS 910146 MPS 910147 MPS 910148 MPS 910149 MPS 910150 MPS 910154 MPS 910156 MPS 910157 MPS 910158 MPS 910159 MPS 910160 MPS 910168
1/2” FPT to 1/2” hose barb 3/4” FPT x 3/4” hose barb 1-1/2” FPT to 1-1/2” hose barb
Marelon Reducer/Adaptors
RB Series
Marelon 90° Female Pipe to Hose Adaptors ▪▪Threads: NPT Part #
A
B
C
D
E
MPS 901006
1/2”
5/8”
7/16”
2”
1-5/8”
MPS 901007
3/4"
3/4"
9/16”
2-3/16”
1-3/4”
MPS 901008
1"
1"
5/8”
2-1/2”
1-7/8”
MPS 901010
1-1/2"
1-1/2"
1-1/8”
3-1/8”
2-3/4”
MPS 901011
2"
2"
1-9/16”
3-5/8”
3-1/4”
Marelon Pipe to Hose Adaptors ▪▪Threads: NPT Part #
Thread
Tailpipe
A
B
C
MPS 905006
1/2"
5/8"
1”
1”
2-1/4”
MPS 905007
3/4"
3/4"
1”
1”
2-3/8”
MPS 905008
1"
1"
1-1/2”
1-1/16”
2-7/8”
MPS 905009
1-1/4"
1-1/4"
1-5/8”
1-1/4”
3-1/4”
MPS 905010
1-1/2"
1-7/16"
1-7/16”
1-1/8”
2-5/8”
MPS 905011
2"
2"
1-11/16”
1-1/4”
3-1/4”
FTC Series
MPS 901045 MPS 901046 MPS 901042 MPS 901044 MPS 901043
FTC 1/2" female FTC 3/4" female FTC 1” female FTC 1-1/4” female FTC 1-1/2” female
MPS 901040 MPS 901050 MPS 901051 MPS 901047 MPS 901048 MPS 901049
MTC 3/4”-1/2” male MTC 3/4”- 3/4” male MTC 1” - 3/4” male MTC 1-1/2" - 1" male MTC 1-1/2" - 1-1/4" male MTC 1-1/2" - 1-1/2" male
MPS 910063 MPS 910062
RB 1-1/2” male - 3/4” female RB 1-1/2" male - 1" female
MTC Series
168
Marelon Marelon 'Y' Valves Forespar ‘Y’ Valves are molded from highstrength noncorrosive Marelon and available in 1” and 1-1/2” barb sizes. The valves are operated by a simple 120° movement. Positive stops are provided between positions. ▪▪Flange: 3-1/2” dia. MPS 902001 1” MPS 902000 1-1/2”
Marelon Vented Loops
Spare parts:
Precision molded in high-strength noncorrosive Marelon, neither vent nor loop will corrode. The duckbill one-way valve is designed to seal properly if particulate matter is present in fluids.
Boating Parts & Accessories
Part #
Barb
Height
Width
MPS 903008
1/2"
5-1/4”
4-1/4”
MPS 903003
5/8"
4-1/2”
4”
MPS 903001
3/4"
4-1/2”
3-3/4”
MPS 903007
1”
7”
9”
MPS 903000
1-1/2"
5-1/4”
7-3/4”
MPS 903002
MPS 902006
Repair kit
Marelon Threaded Valve These valves are designed to meet the needs of builders who require the benefits of the Marelon® integrated plumbing system, with female threads. This valve works great with A.N.P. Thru-hulls. MPS 933342 1/2”
Replacement vent cap
Marelon Valve w/Flush Thru Hull These valves are designed to meet the needs of builders who require the benefits of the Marelon® integrated plumbing system, with female threads. ▪▪Straight hose barb MPS 932143 3/4” MPS 932144 1” MPS 932146 1-1/2”
907013 907028
907000
Marelon Sink Fittings
907014
Marelon® Sink Drains are designed for 1” and 3/4” I.D. hoses and are available in Straight and 90° configurations. Noncorrosive. Model
Tail
Flange
Cut-Out
MPS 907000
Part #
SW-1
Straight 1" hose
1-3/4"
1-5/16"
MPS 907014
SW-2
90° 1" hose
1-3/4"
1-5/16"
MPS 907013
SW-5
Straight 3/4" hose
1-3/4"
1-5/16"
MPS 907028
D-1
Straight 1" screw
-
-
Marelon 'Y' Connectors End plates may be removed for blockage relief. O-ring seal ensures leak free performance and is safe under working pressures up to 80 P.S.I. Available with or without mounting flange. ▪▪Flange: 3-1/2” dia. MPS 902002 MPS 902003 MPS 902004 MPS 902005
1” With flange 1” No flange 1-1/2” With flange 1-1/2” No flange
Marelon Valve w/Flush Thru-Hull These valves are designed to meet the needs of builders who require the benefits of the Marelon® integrated plumbing system, with female threads. ▪▪90° hose barb MPS 932153 3/4”
Marelon Tank Vent For hulls with solid cores only. Unit press-fits into 3/4” dia. hole without the need of a nut. Stainless steel screen will not corrode and has no plating to chip. These vents are precision molded in high-strength noncorrosive Marelon making them completely free from corrosion and electrolysis. ▪▪Height: 7cm ▪▪For 5/8” hose MPS 907029
Marelon / Matworks / Mobri Marelon Garboard Drain
169
Matworks
For newer, thicker transoms, this drain and plug assembly fits up to 1-3/4" thick applications. Made of precision molded Marelon. MPS 906081
3/4" thread
Matworks Entrance Mats
Marelon Drain Plug
Welcome Aboard in navy 18" x 30"
Typically used for transom drains, these high quality plugs are precision molded in high-strength noncorrosive Marelon and fitted with a neoprene seal and stainless steel retainer. ▪▪Fits 1” drainage hose
MFM M10050
MPS 907001
Welcome Aboard in blue half moon shape, 18" x 36."
Molded in high-strength noncorrosive Marelon® for lifetime durability. Clearly marked for use with water. Easy-open cap is fitted with nylon retaining cord and rubber O-ring to ensure a safe and efficient seal. Hose: 1-1/2”, Flange: 4”, Cutout: 2-1/8”, Length: 3” MPS 907003 Water MPS 907004 Waste
Marelon Well Drain Precision molded from acetyl resin (Delrin®) these are corrosion proof, and easy-to-install. They can also be used for other applications such as a chafe guard to lead hose, wiring, steering cables, etc. through bulkheads, floor timbers and fibreglass panels. Barbs on O.D. ensure positive locking action. Fits 1” hole, flange is 1-1/4” dia. MPS 907006 2-1/2”
Welcome Aboard in navy 10” x 22” MFM 10080
Boat Shoes Only in navy 18" x 24" MFM 10090
Mobri
Mobri Radar Reflectors Offers a compact lightweight design by using 40 pieces of aluminium arranged at 90 degrees and staggered at 45 degrees. It provides a radar cross section of 2 square meters. Noiseless, light weight, low windage with less chance of chafe to the sails and rigging. MOB S-2-B MOB S-2-W MOB S-4-B
2” x 23”, Black 2” x 23”, White 4” x 23”, Black
The Mobri M-2 radar reflector comes with a tilting bracket which makes this model especially appropriate for powerboats. It has the same construction as the S-2, offering the same radar cross section of 2 sqm. It can be laid down, is easy to remove, noiseless, light weight and is low windage. MOB M-2-B
2” x 23”, Black
The Mobri M-3 and M-4 are designed with a mounting bracket and are best suited for use with power boats. The best performance is achieved when the Mobri radar reflector is mounted in a vertical position as high as possible over the deck, away from the “shadow” of other equipment such as antennas. ▪▪For power boats and inflatable’s ▪▪Easy to remove, just twist out and stow ▪▪Very low noise ▪▪Light weight ▪▪Low windage MOB M-3-B MOB M-3-W MOB M-4-B MOB M-4-W
4” x 15”, Black 4” x 15”, White 4” x 20”, Black 4” x 20”, White
Boating Parts & Accessories
Marelon Deck Fills
W E
MFM 10010
N
High end, highly fade resistant, rubber backed, jet printed entrance mats.
170
Railblaza
Boating Parts & Accessories
CHOOSE A MOUNT Railblaza StarPort Mounts
The RAILBLAZA StarPort is a unique and versatile mount used in a huge number of applications. The StarPort allows users to fit and swap out our full range of RAILBLAZA accessories. Made from high grade engineering plastics, the StarPort is easy to fit and stylish. It can be surface or recess mounted on power boats, inflatables, sail boats, kayaks, ATVs, garages and many other applications...
RBZ 03-4001-11 RBZ 03-4001-21
Black, 2/pkg White, 2/pkg
RBZ 03-4015-11 RBZ 03-4015-21
Black, each White, each
▪▪StarPorts can be horizontally or vertically mounted in minutes ▪▪Low profile surface mount & minimal depth when recess mounting ▪▪Includes a stylish locking slide for securing accessories firmly in place ▪▪Gasket and bung reduces water ingress
Railblaza SidePort Mounts
Railblaza StarPort Rail Mounts
If you need to mount on a vertical surface, but require a horizontal socket (or vice versa), the SidePort is the mount for you. It's ideally suited for gunwales of smaller aluminium boats or vertical cockpit wells on kayaks.
The RailMount series from RAILBLAZA will now fit anything from a 19mm light rail on a sailboat, to a heavy 41mm aka rail on a Hobie outrigger. ▪▪Fits sizes (19, 20, 25, 32 and 41mm round, and 32mm square) ▪▪No clearance required underneath ▪▪Greater gripping power with the addition of grip tape.
RBZ 03-4014-11 Black RBZ 03-4014-21 White
Rail Mount 19-25 Adapters W
▪▪Stylish, low profile, four screw base mount ▪▪Same footprint as the Scotty, RAM, Cannon and Fish-On ▪▪Allows attachment of any RAILBLAZA accessory ▪▪Locking slide locks accessories in place ▪▪Fasteners not included ▪▪Made in New Zealand
E
N
Railblaza StarPort Rail HD
▪▪Fits 3/4”-1’’ (19 mm - 25 mm) round rail RBZ 03-4003-11 RBZ 03-4003-21
Railmount only, Black, 2/pkg Railmount only, White, 2/pkg
RBZ 03-4011-11 RBZ 03-4011-21
Railmount & Starport, Black, each Railmount & Starport, White, each
RBZ 03-4046-11
HD TracMounting Kit The StarPort HD can also be centrally mounted on many popular track systems, with the added versatility of tool-free adjustment. Just open up the central screw-hole bosses with a drill. RBZ 03-4109-11
Rail Mount 32-41 Adapters ▪▪Fits round 1-1/4" (32 mm) & 1-5/8" (41 mm) rails and square 1-1/4" (32 mm) rails Railmount only, Black, each Railmount only, White, each
Railblaza RIBPort Mounts
RBZ 03-4013-11 RBZ 03-4013-21
Railmount & Starport, Black, each Railmount & Starport, White, each
Add useful StarPort attachments to your inflatable without having holes cut into the tubing. Comes complete with StarPort, and suitable for both PVC and Hypalon tubes. Completely compatible with all StarPort accessories. ▪▪6" x 4.5"
Railblaza TracPort Kayak Pack
RBZ 03-4004-11 RBZ 03-4004-21 RBZ 03-4004-51
RBZ 03-4104-11
W
E
Black, each White, each Grey, each
N
RBZ 03-4012-11 RBZ 03-4012-21
▪▪The TracMount kit allows you to attach StarPorts to leading brand Kayak tracks. StarPort not included
171
Railblaza
ADD AN ACCESSORY
Railblaza Screengrabba II iPad/Tablet Holder 04-4020-11
▪▪Wider adjustment to hold a greater variety of tablet sizes ▪▪Allows portrait & landscape viewing (landscape only for tablets over 10") ▪▪Will hold more dry cases, both hard & soft designs
The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position. ▪▪Rotating collar helps reduce 'strike-theft' ▪▪Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through ▪▪Fully adjustable 360° around, 90° vertical ▪▪Easy access to reel when in position ▪▪Square-tooth tilt stops rotational slipping
Screengrabba II only Screengrabba II w/starport mount
RBZ 02-4020-11 RBZ 02-4020-21
Black rod holder only White rod holder only
Railblaza Rod Holder II Kit Railblaza Mobi Holders
RBZ 04-4055-11
Black rod holder with HD StarPort mount
W
E
Railblaza Drink Holders Can be mounted in either horizontally or vertically-mounted StarPorts, to hold mugs, stubbies, wine glasses, even cell phones. The extendable fingers hold the taller items in place, yet everything collapses into a convenient flat pack for storage.
RBZ 02-4033-11 Adjustable RBZ 02-4034-11 Fixed
RBZ 02-4013-11 RBZ 02-4013-21
Railblaza Mobi Holder Kits
Black drinkholder only White drinkholder only
Drink Holder Kits
▪▪Includes StarPort RBZ 04-4033-11 Adjustable RBZ 04-4034-11 Fixed
Black rod holder with StarPort mount White rod holder with StarPort mount
N
▪▪Mobile Device Holder, or “Mobi” for short, is ready to look after your phone, GPS, VHF, EPIRB or other mobile device ▪▪The spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power ▪▪A UV stabilised, eurethane rubber retaining strap ensures your device goes nowhere ▪▪Available in 2 models, the adjustable Mobi tilts and can be mounted any way you like
RBZ 04-4020-11 RBZ 04-4020-21
Fixed
RBZ 04-4008-11 RBZ 04-4008-21
Black drinkholder with StarPort mount White drinkholder with StarPort mount
N W E
Railblaza Mobi Adjustable Mounts ▪▪Allows tilt angles for optimum viewing RBZ 02-4018-11** Black mount only
Railblaza Mobi Fixed Mounts ▪▪Perfect for low-profile wall or dash mounting RBZ 02-4019-11** Black mount only
** Limited Quatities
Railblaza Drink Holders DrinkHolds can be easily mounted into a vertical or horizontal StarPort and will hold anything from drink bottles to coffee mugs along with the ability to hang fishing lures or store pliers. ▪▪Available with or without Starport RBZ 02-4048-11 RBZ 02-4048-21
Black, each White, each
Drink Holder Kits RBZ 04-4048-11 RBZ 04-4048-21
Black, with StarPort mount White, with StarPort mount
Boating Parts & Accessories
RBZ 02-4045-11 RBZ 04-4045-11
04-4055-11
Railblaza Rod Holder II
172
Railblaza E N W
Railblaza Rotating Platforms The ideal mount if you need the ability to easily remove your sounder or navigational aid. Once locked into a StarPort the platform can be turned a full 360°. RBZ 02-4021-11 RBZ 02-4022-11
Railblaza ROKK Multi Purpose Mount ▪▪The Rokk is a robust ball joint system ▪▪The bottom plugs into any port, and the top will receive any RAILBLAZA accessory ▪▪Add a platform and it will hold heavier sounders and GPS plotters ▪▪The metal on metal ball and socket system gives ultra high clamping force with zero loss of clamping force over time ▪▪Engineered to withstand high shock loading, tilt 270°, 360° rotation
4" x 4", each 6" x 3", each
▪▪Can be used for attaching depth sounders, small tackle boxes, small bait boards and many other kayak accessories ▪▪Easily removed for stowing when not required ▪▪L: 3.9" x W: 2.56" x H: 3.27" Black platform only, each White platform only, each
W
E
RBZ 02-4002-11 RBZ 02-4002-21
RBZ 03-4051-11 N
Boating Parts & Accessories
Railblaza Platform Mounts
Railblaza Platform Mount Kits RBZ 04-4002-11 RBZ 04-4002-21
Railblaza Camera Mount Adapter
Black platform with StarPort mount, each White platform with StarPort mount, each
▪▪This adaptor will fit all cameras with a 1/4-20 thread insert allowing them to become StarPort compatible ▪▪Then to mount it on almost any surface just add the correct RAILBLAZA mount ▪▪Also includes GoPro Tripod adaptor to suit most action cameras on the market RBZ 02-4053-11
Railblaza Three Axis Platform N W
E
With two swivel points and a tilt adjustment you can rotate, tilt and change the view from landscape to profile. Can be mounted on vertical or horizontal surfaces, but really comes into it's own if you have a sloping surface and need your display on a different angle. Made from high density polyethylene, fixing items to it can be as simple as screwing a self tapping screw directly into it. ▪▪102mm x 102mm RBZ 02-4025-11
Length
Device Limit
Weight
RBZ 02-4036-11
700 mm
0.8 kg
390 gr
RBZ 02-4037-11
340 mm
2.5 kg
320 gr
W
Part #
E
▪▪5 adjustment axes, the 5th axis is for "horizon correction", so if the Boom is mounted on a sloping surface you can still get the horizon level with a quick tweak of this 5th joint ▪▪All friction joints are factory set, no need to tighten any joints ▪▪The top platform is fully removable ▪▪Satin black anodised finish ▪▪Camera Screw Thread: 1/4" BSW ▪▪Platform Size: 100mm x 100mm (4" x 4")
N
Railblaza Pro Series Platform Booms
Railblaza Camera Mount Kit ▪▪Includes 3 axis knuckle joint, camera mount adapter (see below) and GoPro tripod adaptor ▪▪Kit allows you to adjust your camera to every angle ▪▪Factory set friction joints keep your camera steady RBZ 02-4054-11
Railblaza
173
Railblaza Telepole ▪▪Compresses to 22" and expands to 41" ▪▪A male StarPort adaptor at one end and a female StarPort at the top end ▪▪Attach a NAVISAFE 360 LED Navi Light (#055 or #355) ▪▪Fits into any StarPort, SidePort, RailMount or RIBPort (#525) ▪▪The telescopic pole also fits many anchor winches and winches
Railblaza Fillet Table II
RBZ 02-4035-11
Improved design includes: ▪▪Knife storage - at the back for safety ▪▪An all-round drain that stops spill from the front ▪▪No front lip to get in the way while filleting ▪▪Easy-fit overboard drain ▪▪525 mm x 350 mm
RBZ 02-4024-11
Railblaza Extenders
Railblaza Fillet Table II Kit
▪▪StarPort extenders plug into any StarPort, and have the same star shape on top giving you 12.5 cm of clearance from the StarPort ▪▪Adjustable extender has one pivot that allows full-circle free rotation (under resistance) along the central axis. It also has a central knob to adjust for up to 180° tilt in 15° increments
Full Kit Includes: ▪▪1 x fillet table/bait board ▪▪2 x adjustable platforms ▪▪2 x StarPorts ▪▪2 x surface mount adapter rings ▪▪2 x weather-tight gasket/covers ▪▪8 x 10g x 20 stainless steel screws ▪▪4 x 12-gauge 32 mm self-tapping screws ▪▪4 x (M6 x 32 mm) bolts, washers & nuts
RBZ 03-4016-11 Fixed RBZ 03-4017-11 Adjustable
E
N
Railblaza Swivel Port
W
▪▪The SwivelPort is designed to allow accessories to be easily rotated 360 degrees ▪▪Factory set friction joint ▪▪Can be attached to any StarPort, SidePort, RIBPort or RailMount and will receive any RAILBLAZA accessory
RBZ 04-4024-11
W
E
N
RBZ 03-4042-11
E N W
Railblaza Attachment Adapters RAILBLAZA attachment adapators are designed to make many items StarPort compatible. You can also bolt the 2 adaptors together to make a male to male fitting. The male to male fitting has been used to create a detachable system for tubes on kayak sailor kits & outriggers & has many other applications. RBZ 02-4043-11
Black, pair
Railblaza Adapters Attach it to any item you want, to make it StarPort-compatible. RBZ 02-4017-11 RBZ 02-4017-21
Black, 2/pkg White, 2/pkg
Boating Parts & Accessories
Basic Kit Includes: ▪▪1 x fillet table/bait board ▪▪2 x Adjustable platforms ▪▪8 x 10g x 20 stainless steel screws
Railblaza Stowpod Holders ▪▪Holds pliers, keys, lures, phones, VHF's, binoculars, drink bottles, sunblock, mugs & much more. ▪▪Movable drink holder partition ▪▪Mounts into any vertical or horizontal StarPort or can be permanently fastened in place ▪▪Mounts on rails or inflatables by adding other applicable RAILBLAZA mounts ▪▪Easily removed and stowed when not in use or transferred to another position RBZ 02-4040-11 Black RBZ 02-4040-21 White
174
Railblaza E N W
Railblaza Bimini Supports This support is designed to secure biminis, canopies and covers to your boat, with the advantage of being easily removed using the StarPort system.
The CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Also included is a backing plate designed to keep stainless fastenings isolated from aluminium decks to avoid corrosion. Comes with all stainless fasteners. RBZ 03-4044-11 Black RBZ 03-4044-21 White
W
E
N
Boating Parts & Accessories
Railblaza Cleatport
RBZ 02-4032-11
Railblaza G-Holds ▪▪Holds various sizes of poles, oars and paddles ▪▪The flexible quick-release strap has two securing points for minimum and maximum diameters, providing strong retention RBZ 02-4006-11** RBZ 02-4006-21** RBZ 02-4007-11** RBZ 02-4007-21** RBZ 02-4008-11** RBZ 02-4008-21**
** Limited Quatities
Railblaza Cleatport/Ribmount
Black, 2/pkg
1-1/4" dia (35mm), Black, 2/pkg 1-1/4" dia (35mm), White, 2/pkg 2" dia (50mm), Black, 2/pkg 2" dia (50mm), White, 2/pkg 3" dia (75mm), Black, 2/pkg 3" dia (75mm), White, 2/pkg
The CleatPort RIB Mount gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Comes with a PVC RIB Port and all stainless fasteners. RBZ 03-4049-11 Black RBZ 03-4049-21 White
W
E
N
Railblaza Hook 25 ▪▪1" diameter eye RBZ 02-4004-11 RBZ 02-4004-21
Black, 2/pkg White, 2/pkg
Railblaza Eye 25 Railblaza Rowlocks Rowlock Pairs attach to the oar itself, and clip in and out of a RIBPort. By positioning a pair of RIBPorts in place of the usual rowlocks on your small inflatable or RIB, it becomes a matter of simply clipping out your oar to clear the tube, and then you can clip in any RAILBLAZA accessory. StarPort-compatible. RBZ 02-4047-11 RBZ 02-4047-21
Black, 2/pkg White, 2/pkg
▪▪1" diameter eye RBZ 02-4003-11 RBZ 02-4003-21
Black, 2/pkg White, 2/pkg
Railblaza Web Eye 30 ▪▪1-1/4" oval eye ▪▪Crafted for webbing straps to reduce fold over RBZ 02-4005-11 RBZ 02-4005-21
Black, 2/pkg White, 2/pkg
Railblaza
W E
W
Shown with mount kit 03-4110-11 (see below)
N
E
The new NaviLux 360° light offers Cree Technology. The single Cree LED gives off 110 lumens of light ▪▪Powered by 3 x AA batteries (not included) ▪▪Operating time of 20 hours at full brightness ▪▪Designed to meet US Coastguard 2nm standard (approval pending) ▪▪Removable light shield included
N
Railblaza NaviLux 360 Light
175
Railblaza Propane/Dive Bottle Holder Kit
RBZ 02-5003-11
N E W
Can be mounted at different spacing’s to hold Dive bottles , Gas bottles or even Jerry cans. Supplied with 38mm strap and detachable buckle for secure retention. Also supplied with Star adaptors to enable the brackets to be installed into any Starport to allow easy removal for stowage or transfer to other Starports. RBZ 02-4056-11
W E
Everything in one kit to give day and night visibility when on the water in your kayak or canoe. The TelePole can also be retasked to carry a GoPro camera or similar on top during daylight hours. Kit includes: ▪▪TelePole extendable from 550mm (21.65") to 1050mm (41.3") ▪▪Orange visibility flag ▪▪NaviLux 360 kayak light ▪▪Directional light shield ▪▪StarPort and stainless steel mounting fasteners
Railblaza TracPort 500 Gas/Dive Bottle Mount
RBZ 04-4041-11
RBZ 03-4110-11
Supplied as a 500mm length of track with track nuts fitted ready to receive the Dive/Gasbottle brackets. This track allows easy positioning of the brackets to allow for adjustment for different size Dive and Gas bottles. Fastenings included.
Railblaza Flag Whip & Pennant ▪▪Light, mobile & flexible ▪▪Ideal for kayaks ▪▪Increase visual presence on the water ▪▪Comes with 300 x 150 mm pennant ▪▪Easily removed for transporting ▪▪Can be re-tasked to fly a dive flag, by rolling up the existing pennant and sliding the sock the dive flag over the top ▪▪Overall length: 46" RBZ 02-4010-11
Flag whip and pennant only
Flag Whip & Pennant Kit RBZ 04-4009-11
Railblaza Dive Bottle Holder Kit ▪▪Take care of your air and add functionality to your boat. ▪▪Comes with the Railblaza Dive Bottle pad, (2) StarPort WebEye30s - use them to mount the Dive Bottle pad and strap dive bottles in, or when the pad isn’t needed, re-task the StarPorts with any other Railblaza StarPort attachments ▪▪H: 150 mm x W: 200 mm RBZ 04-4004-11
Includes (2) StarPort mounts
Includes StarPort mount
W
E
N
Railblaza Aluminum Flag Pole Light and strong, whether you need to mount a diving flag or just proudly display your allegiance to your club, sport, country or hoist the Jolly Roger. ▪▪Easily removed for stowing ▪▪Fits into StarPort-enabled rails or surfaces ▪▪Also mounts into common top-handle sailboat winches ▪▪Overall length: 32" RBZ 02-4009-11
Flag pole only
Railblaza Wall Sling ▪▪Storage of a wide range of watercraft including SUPs, canoes, windsurfers and kayaks ▪▪The StarPort Wall Sling will free up space in your garage, shed or yard ▪▪Installed in minutes and supplied with StarPorts, slings, adjustment buckles and screws RBZ 04-4050-11
Boating Parts & Accessories
N
Railblaza Kayak Visibility Kit
176
Railblaza
Railblaza TracPort Dash Series The TracPort Dash 350 turns one StarPort into three. TracPort Dash 500 turns two StarPorts in to four. Extra StarPort TracMounts can be purchased separately (see TracMount kit below) TracPort Dash 500 ▪▪Includes 500mm Trac with 4 StarPortsinstalled and 2 attachment adaptors RBZ 03-4102-11
TracPort Dash 350 ▪▪Includes 350mm Trac with 3 StarPorts installed and 1 attachment adaptor RBZ 03-4103-11
Boating Parts & Accessories
Railblaza TracMount Kit ▪▪Includes a StarPort mount & TracNut RBZ 03-4101-11 each
Railblaza TracPort Starter Pack ▪▪Backbone of your engine room or storage area ▪▪Provides a strong, versatile framework to hold battery switches, pumps, fuel filters, black boxes, and a lot more ▪▪TracPort is 100% StarPort compatible, add, move and remove items on TracPort ▪▪Add G-Holds hooks eyes or webeyes ▪▪TracPort are joinable (see Joiner Kit below) ▪▪Comes with mounting feet, bolts, infill and endcaps RBZ 01-1105-61 RBZ 01-1110-61
500 mm 1000 mm
Railblaza TracMount Kit Can be positioned at any point within your TracPort system allowing the full range of StarPort accessories to be used. ▪▪Includes a StarPort mount & TracNut RBZ 03-4101-11 each
Railblaza TracPort Mount Pads ▪▪May be positioned at any point on the TracPort extrusion at 90° orientations ▪▪Equipment may be screwed or bolted into the pad. For larger equipment, two or more pads may be used to bridge the equipment along the extrusion, or for heavier equipment, across pads on neighbouring extrusions. ▪▪Includes mount pad & TracNut RBZ 01-2001-11 RBZ 01-2002-11
102 mm x 102 mm 150 mm x 70 mm
TracPort TracNuts Connects the TracPort with a mounting accessory, like a mount pad or StarPort RBZ 01-2003-11 2/pkg
TracPort Mount Pads RBZ 03-4009-11** 102 mm x 102 mm, each RBZ 03-4010-11** 150 mm x 70 mm, each
**Limited Quatities
Railblaza Endcap Joiner Kit ▪▪Allows you to add another extrusion inline with an existing TracPort ▪▪Includes foot, joiner and endcap RBZ 01-2004-11
Soundown / SSI / Stainless Outfitters / Swivl-Eze Soundown
177
Stainless Outfitters
Soundown Noise Reduction 10-35 dBA noise reduction. 1" and 1-1/4" thick barrier consisting of a layer of fire retardant foam with a 1 mil reflective, easy to clean, chrome polyester facing and a layer of 1 lb./sq.ft. lead substitute. Use for larger gasoline and all diesel engines for maximum quieting. Use a double layer for severe applications (up to 50 Db noise reduction). Do not use in areas where temperature exceeds 250°F. No.
Thickness
SOU 54X32X1
32" x 54"
1"
SOU 54X72X11/4F
54" x 72"
1-1/4" w/facing
Parts: SOU HPA25K
Aluminum insulation pin & keeper, 2-1/2"
Universal fit outboard motor hoist capable of lifting up to 150 lbs. All stainless steel construction with a 3:1 block lifting ratio. Order with or without rope. STA HANDI STA HANDI-RP
With rope package
Swivl-Eze
2” x 108’ mylar 2” x 216’ mylar 2” x 125’ SCRIM mylar
SSI
W
SOU HTA20S SOU HTA20L SOU HTA20SC
E
Mylar tape is a 2” wide self adhering product for finishing sound barrier installations. The SCRIM version has the same texture as the faced sound barrier for a professional looking finish.
N
Soundown Mylar Tape
Swivl-Eze Deck Master Ski Pylon ▪▪Constructed with 1" stainless steel tubing ▪▪Quick disconnect hitch pin system for easy assembly and removal ▪▪33" to 51" telescoping brace arms allow for fitting to most boats SWI 96009
SSI Universal Mast Boots ▪▪Made of extremely flexible UV resistant vinyl ▪▪Fit many sizes of masts with deck collars of the same basic shape ▪▪Molded in steps so top and bottom can be cut at the level that provides a snug fit to the mast and deck collar ▪▪Boot may be installed on stepped masts ▪▪Secure top and bottom of boot with stainless steel hose clamps (Sold separately) SSI 91000000 SSI 91200000 SSI 91400000 SSI 900-088 SSI 900-096 SSI 900-104 SSI 900-128 SSI 900-152 SSI 900-188
Masts to 17-1/2”, collar to 31” Masts to 23”, collar to 37” Masts to 30”, collar to 44” Clamp, 13.15” to 18.8” Clamp, 14.1” to 20.4” Clamp, 15.6” to 22” Clamp, 20” to 26.6” Clamp, 25.5” to 31.4” Clamp, 32.7” to 38.4”
SSI Instrument Cover Weather resistant capped ABS plastic cover fits Datamarine instruments. SSI 55008009
5” diameter
Boating Parts & Accessories
Size
Stainless Outfitters Handi-Lift
178
Transat Stainless Transat Stainless Spring Hook
Transat Stainless Carbine Hook With Grommet
▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P)
▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P) Part #
Gauge
Eye
Gate
Part #
Length
Gate
Eye
Break Load
TMS S-8150-050
2”
7/16”
1/4”
400 lbs
2”
7/16”
1/4”
400 lbs
TMS S-2451-050
2”
3/16”
9/32”
1/4”
600
TMS S-8150-050-P
TMS S-2451-050-P
2”
3/16”
9/32”
1/4”
600
TMS S-8150-070
2-3/4”
15/32”
15/32”
1700 lbs
2-3/4”
15/32”
15/32”
1700 lbs
TMS S-2451-060
2-3/8”
1/4”
9/32”
5/16”
800
TMS S-8150-070-P
TMS S-2451-060-P
2-3/8”
1/4”
9/32”
5/16”
800
TMS S-8150-100
4”
3/4”
19/32”
3000 lbs
TMS S-8150-100-P
4”
3/4”
19/32”
3000 lbs
TMS S-2451-080
3-1/8”
5/16”
13/32”
TMS S-2451-080-P
3-1/8”
5/16”
4”
3/8”
TMS S-2451-100 TMS S-2451-100-P
Boating Parts & Accessories
Size
Break Load
7/16”
1,000
13/32”
7/16”
1,000
1/2”
17/32”
1,500
4”
3/8”
1/2”
17/32”
1,500
TMS S-2451-120
4-11/16”
7/16”
11/16”
23/32”
2,000
TMS S-2451-120-P
4-11/16”
7/16”
11/16”
23/32”
2,000
Transat Stainless Spring Hook ▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P) Part #
Size
Gauge
Eye
Gate
TMS S-2453-06
2-3/8”
1/4”
11/32”
19/32”
TMS S-2453-06-P
2-3/8”
1/4”
11/32”
19/32”
TMS S-2453-08
3-7/32”
5/16”
7/16”
11/16”
TMS S-2453-08-P
3-7/32”
5/16”
7/16”
11/16”
TMS S-2453-10
4”
3/8”
19/32”
13/16”
TMS S-2453-10-P
4”
3/8”
19/32”
13/16”
TMS S-2453-12
4-3/4”
1/2”
11/16”
7/8”
TMS S-2453-12-P
4-3/4”
1/2”
11/16”
7/8”
Transat Stainless Open Hook ▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P) Length
Gate
Eye
Break Load
TMS S-8151-050
Part #
2”
7/16”
1/4”
400 lbs
TMS S-8151-050-P
2”
7/16”
1/4”
400 lbs
Transat Stainless Swivel Snap Shackles ▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P) Size
Length
Break Load
TMS S-8291-12
Part #
1/2”
2-3/4”
3,000 lbs
TMS S-8291-12-P
1/2”
2-3/4”
3,000 lbs
TMS S-8291-16
5/8”
3-1/2”
6,000 lbs
TMS S-8291-16-P
5/8”
3-1/2”
6,000 lbs
TMS S-8291-22
7/8”
5”
8,300 lbs
TMS S-8291-22-P
7/8”
5”
8,300 lbs
Size
Length
Break Load
TMS S-8294-12
1/2”
2-3/4”
3,000 lbs
TMS S-8294-12-P
1/2”
2-3/4”
3,000 lbs
TMS S-8294-16
5/8”
3-1/2”
6,000 lbs
TMS S-8294-16-P
5/8”
3-1/2”
6,000 lbs
TMS S-8294-22
7/8”
5”
8,300 lbs
TMS S-8294-22-P
7/8”
5”
8,300 lbs
Transat Stainless Swivel Snap Shackles w/Pin ▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P) Part #
179
Transat Stainless Transat Stainless Fixed Snap Shackles
Transat Stainless Swivel Jaw & Jaw
▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P) Part #
Size
Length
Break Load
TMS S-8292-12
1/2”
2-1/8”
3,000 lbs
TMS S-8292-12-P
1/2”
2-1/8”
3,000 lbs
TMS S-8292-16
5/8”
2-3/4”
6,000 lbs
TMS S-8292-16-P
5/8”
2-3/4”
6,000 lbs
TMS S-8292-22
7/8”
4”
8,300 lbs
TMS S-8292-22-P
7/8”
4”
8,300 lbs
Transat Stainless Fast Eye Fixed Boat Snaps
Size
Length
Eye
Gate
TMS S-249-0
Part #
0
2-1/8”
18/32”
15/32”
TMS S-249-0-P
0
2-1/8”
18/32”
15/32”
TMS S-249-1**
1
2-13/16”
5/8”
21/32”
TMS S-249-2
2
2-3/16”
23/32”
7/8”
TMS S-249-2-P
2
2-3/16”
23/32”
7/8”
TMS S-249-3
3
3-3/4”
3/4”
31/32”
TMS S-249-3-P
3
3-3/4”
3/4”
31/32”
** Limited Quantities
Transat Stainless Fast Eye Swivel Boat Snaps ▪▪Stainless steel ▪▪Bulk or display packaged (P) Part #
Size
Length
Eye
Gate
TMS S-251-1
1
3-11/32”
21/32”
5/8”
TMS S-251-1-P
1
3-11/32”
21/32”
5/8”
TMS S-251-2
2
2-23/32”
3/4”
13/16”
TMS S-251-2-P
2
2-23/32”
3/4”
13/16”
TMS S-251-3
3
4-9/16”
3/4”
29/32”
TMS S-251-3-P
3
29/32”
4-9/16”
3/4”
Length
Pin Dia.
Jaw Open
Break Load
TMS S-8281-06
2-1/2”
1/4”
1/2”
2,200 lbs
TMS S-8281-06-P
2-1/2”
1/4”
1/2”
2,200 lbs
TMS S-8281-08
3-1/2”
5/16”
5/8”
4,000 lbs
TMS S-8281-08-P
3-1/2”
5/16”
5/8”
4,000 lbs
TMS S-8281-10
4-1/2”
3/8”
3/4”
4,600 lbs
TMS S-8281-10-P
4-1/2”
3/8”
3/4”
4,600 lbs
TMS S-8281-13
5-3/4”
1/2”
7/8”
9,200 lbs
TMS S-8281-13-P
5-3/4”
1/2”
7/8”
9,200 lbs
Part #
Transat Stainless Swivel Eye & Eye ▪▪316 stainless steel ▪▪Bulk or display packaged (P) Part #
TMS S-8280-05 TMS S-8280-05-P
Size
Gate
Break Load
2”
3/16”
1,760 lbs
2”
3/16”
1,760 lbs
TMS S-8280-06
2-1/2”
1/4”
3,080 lbs
TMS S-8280-06-P
2-1/2”
1/4”
3,080 lbs
TMS S-8280-08
3-1/2”
5/16”
5,500 lbs
TMS S-8280-08-P
3-1/2”
5/16”
5,500 lbs
TMS S-8280-09
4-1/2”
3/8”
6,300 lbs
TMS S-8280-09-P
4-1/2”
3/8”
6,300 lbs
Transat Stainless Quick Links ▪▪316 stainless steel ▪▪Bulk or display packaged (P) Part #
Length
Gauge
Open
Break
TMS S-7350-04
1-9/16”
5/32”
3/16”
2,000 lbs
TMS S-7350-04-P
1-9/16”
5/32”
3/16”
2,000 lbs
TMS S-7350-05
1-15/16”
3/16”
7/32”
2,600 lbs
TMS S-7350-05-P
1-15/16”
3/16”
7/32”
2,600 lbs
TMS S-7350-06
2-1/4”
1/4”
5/16”
3,500 lbs
TMS S-7350-06-P
2-1/4”
1/4”
5/16”
3,500 lbs
TMS S-7350-08
2-7/8”
5/16”
3/8”
6,100 lbs
TMS S-7350-08-P
2-7/8”
5/16”
3/8”
6,100 lbs
TMS S-7350-10
3-5/8”
3/8”
1/2”
9,200 lbs
TMS S-7350-10-P
3-5/8”
3/8”
1/2”
9,200 lbs
Boating Parts & Accessories
▪▪Stainless steel ▪▪Bulk or display packaged (P)
▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P)
180
Transat Stainless
Transat Stainless Wire Rope Clips
Transat Stainless Welded Rings ▪▪316 stainless steel ▪▪Bulk or display packaged (P)
▪▪316 stainless steel ▪▪Bulk or display packaged (P)
Boating Parts & Accessories
Part #
Loop Gauge
Wire Dia.
TMS S-8800-03
1/8”
3/32”
TMS S-8800-03-P
1/8”
3/32”
TMS S-8800-04
5/32”
1/8”
TMS S-8800-04-P
5/32”
1/8”
TMS S-8800-05
3/16”
3/16”
TMS S-8800-05-P
3/16”
3/16”
TMS S-8800-06
1/4”
7/32”
TMS S-8800-06-P
1/4”
7/32”
TMS S-8800-08
5/16”
9/32”
TMS S-8800-08-P
5/16”
9/32”
TMS S-8800-10
3/8”
3/8”
TMS S-8800-10-P
3/8”
3/8”
TMS S-8800-12
1/2”
7/16”
TMS S-8800-12-P
1/2”
7/16”
TMS S-470-0325 1/8” x 1” TMS S-470-0325-P 1/8” x 1” TMS S-470-0425 5/32” x 1” TMS S-470-0425-P 5/32” x 1” TMS S-470-0525 3/16” x 1” TMS S-470-0525-P 3/16” x 1” TMS S-470-0530 3/16” x 1-1/4” TMS S-470-0530-P 3/16” x 1-1/4” TMS S-470-0540 3/16” x 1-1/2” TMS S-470-0540-P 3/16” x 1-1/2” TMS S-470-0550 3/16” x 2” TMS S-470-0550-P 3/16” x 2” TMS S-470-0630 1/4” x 1-1/4” TMS S-470-0630-P 1/4” x 1-1/4” TMS S-470-0640 1/4” x 1-1/2” TMS S-470-0640-P 1/4” x 1-1/2” TMS S-470-0650 1/4” x 2” TMS S-470-0650-P 1/4” x 2”
Transat Stainless ‘S’ Hooks
TMS S-470-0840 5/16” x 1-1/2” TMS S-470-0840-P 5/16” x 1-1/2”
▪▪Forged 316 stainless steel ▪▪Bulk or display packaged (P) Part #
TMS S-470-0320 1/8” x 3/4” TMS S-470-0320-P 1/8” x 3/4”
Gauge
Opening
TMS S-8070-05
3/16”
11/32”
TMS S-8070-05-P
3/16”
11/32”
TMS S-8070-06
1/4”
13/32
TMS S-8070-06-P
1/4”
13/32
TMS S-8070-08
5/16”
15/32”
TMS S-8070-08-P
5/16”
15/32”
TMS S-470-0845 5/16” x 1-3/4” TMS S-470-0845-P 5/16” x 1-3/4” TMS S-470-0850 5/16” x 2” TMS S-470-0850-P 5/16” x 2” TMS S-470-0865 5/16” x 2-1/2” TMS S-470-0865-P 5/16” x 2-1/2” TMS S-470-0950 3/8” x 2” TMS S-470-0950-P 3/8” x 2” TMS S-470-0980 3/8” x 3-1/2” TMS S-470-0980-P 3/8” x 3-1/2”
Transat Stainless
1/4” x 2” 1/4” x2
W
TMS S-6325-2650 TMS S-6325-2650-P
E
▪▪316 stainless steel ▪▪Bulk or display packaged (P)
N
Transat Stainless Welded Triangle Rings
181
Transat Stainless Thimbles ▪▪304 stainless steel TMS S-2344 3MM TMS S-2344 4MM
Transat Stainless Open Base Stainless Cleats Transat Stainless Welded ‘D’ Rings ▪▪316 stainless steel ▪▪Bulk or display packaged (P) TMS S-469-0315 1/8” x 5/8” TMS S-469-0315-P 1/8” x 5/8 TMS S-469-0420 5/32” x 3/4” TMS S-469-0420-P 5/32” x 3/4”
TMS S-469-0525 3/16” x 1” TMS S-469-0525-P 3/16” x 1” TMS S-469-0532 3/16” x 1-1/4” TMS S-469-0532-P 3/16” x 1-1/4” TMS S-469-0538 3/16” x 1-1/2” TMS S-469-0538-P 3/16” x 1-1/2” TMS S-469-0632 1/4” x 1-1/4” TMS S-469-0632-P 1/4” x 1-1/4” TMS S-469-0850 5/16” x 2” TMS S-469-0850-P 5/16” x 2” TMS S-469-0862 5/16” x 2-7/16” TMS S-469-0862-P 5/16” x 2-7/16” TMS S-469-0875 5/16” x 3” TMS S-469-0875-P 5/16” x 3”
TMS Q30002 4” TMS Q30002-P 4” TMS Q30003 5” TMS Q30003-P 5” TMS Q30004 6” TMS Q30004-P 6” TMS Q30005 8” TMS Q30005-P 8” TMS Q30006 10” TMS Q30006-P 10” TMS Q30007 12” TMS Q30007-P 12”
Transat Stainless Low Silhouette Cleats ▪▪316 stainless steel TMS Q31004 6” TMS Q31005 8” TMS Q31006 10”
Transat Stainless Straight Chocks ▪▪316 stainless steel TMS Q30010 5” TMS Q30011 6”
Transat Stainless Skene Bow Chocks ▪▪316 stainless steel TMS Q30014A TMS Q30014B TMS Q30015A TMS Q30015B
4-1/2” - RH 4-1/2” - LH 6” - RH 6” - LH
Boating Parts & Accessories
TMS S-469-0425 5/32” x 1” TMS S-469-0425-P 5/32” x 1”
▪▪316 stainless steel ▪▪Bulk or display packaged (P)
182
Transat Stainless
Transat Stainless Pad Eye Oblong Base
Transat Stainless Eye Strap
▪▪304 stainless steel
▪▪316 stainless steel
TMS Q32101 9.5mm
TMS Q69211 3” TMS Q69212 3-1/2” TMS Q69213 4”
Transat Stainless Stamped Eye Strap
Transat Stainless Pad Eye Diamond Base ▪▪304 stainless steel
Boating Parts & Accessories
TMS Q69214 3-1/8” TMS Q69215 3-1/2” TMS Q69216 4”
▪▪316 stainless steel
TMS Q32105 5mm
Transat Stainless Wire Stamped Eye Straps ▪▪316 stainless steel
Transat Stainless 4-Hole Pad Eyes
TMS Q32205 5mm TMS Q32206 6mm TMS Q32208 8mm
▪▪304 stainless steel ▪▪Bulk or display packaged (P)
Transat Stainless HD Deck Hinge
Loop Gauge
Base
TMS S-8020-05
Part #
3/16”
1-11/32” x 1-3/16”
TMS S-8020-05-P
3/16”
1-11/32” x 1-3/16”
TMS S-8020-06
1/4”
1-19/32” x 1-11/32”
TMS S-8020-06-P
1/4”
1-19/32” x 1-11/32”
TMS S-8020-08
5/16”
1-31/32” x 1-17/32”
TMS S-8020-08-P
5/16”
1-31/32” x 1-17/32”
Transat Stainless 2-Hole Pad Eyes
TMS Q30093
Loop Gauge
Base
TMS S-8030-05
3/16”
1-25/32” x 14/32”
TMS S-8030-05-P
3/16”
1-25/32” x 14/32”
TMS S-8030-06
1/4”
2-11/32” x 25/32”
TMS S-8030-06-P
1/4”
2-11/32” x 25/32”
TMS S-8030-08
5/16”
3-1/8” x 1”
TMS S-8030-08-P
5/16”
3-1/8” x 1”
Side mounted
Transat Stainless Deck Hinge ▪▪316 stainless steel ▪▪Dimensions: 7/8” x 2” ▪▪Fastener: #10 ▪▪Pin: 1/4” TMS Q30098
▪▪304 stainless steel ▪▪Bulk or display packaged (P) Part #
▪▪316 stainless steel ▪▪Dimensions: 1” x 2-3/4” ▪▪Fastener: #10 ▪▪Pin: 5/16”
Side mounted
Transat Stainless Deck Hinges ▪▪316 stainless steel ▪▪Base Diameter: 3/4” x 2-1/4” ▪▪Fastener: #10 ▪▪Pin: 1/4” TMS Q30086 Straight TMS Q30088 Angled
Transat Stainless Concave Deck Hinge ▪▪316 stainless steel ▪▪Base Dimensions: 3/4” x 2-1/4” ▪▪Fastener: #10 ▪▪Pin: 1/4” TMS Q30090
Transat Stainless Transat Stainless Rail Fitting Rectangle Base
Transat Stainless 90° Elbows
▪▪316 stainless steel
TMS Q30063 7/8” TMS Q30064 1”
TMS Q30035 TMS Q30036 TMS Q30053 TMS Q30054
90° 7/8” 90° 1” 60° 7/8” 60° 1”
183
▪▪316 stainless steel
Transat Stainless Top Cap Fittings ▪▪316 stainless steel
Transat Stainless Rail Fitting Round Base
TMS Q30017 TMS Q30018
7/8” w/eye 1” w/eye
Left hand Left hand, carded Right hand Right hand, carded
Transat Stainless Jaw Slide ▪▪316 stainless steel TMS Q30081 7/8” TMS Q30082 1”
Transat Stainless 3-Way Corner Fitting ▪▪316 stainless steel
Transat Stainless Centre 60° Stanchion
TMS Q30020 7/8” TMS Q30021 1”
▪▪316 stainless steel TMS Q30025 7/8” TMS Q30026 1”
Transat Stainless Stanchion Cap
Transat Stainless After 60° Stanchion
▪▪316 stainless steel
▪▪316 stainless steel
TMS Q30022 7/8” TMS Q30023 1”
TMS Q30027 7/8” TMS Q30028 1”
Transat Stainless 60° Rail Tees
Transat Stainless 2-Part Jaw Slide
▪▪316 stainless steel TMS Q30057 TMS Q30058
▪▪316 stainless steel 60° 7/8” 60° 1”
Transat Stainless 90° Rail Tees ▪▪316 stainless steel TMS Q30059 7/8” TMS Q30060 1”
TMS Q35081 7/8” TMS Q35082 1”
Boating Parts & Accessories
▪▪316 stainless steel
W
Transat Stainless Stanchion Eye
▪▪316 stainless steel
TMS Q16002L TMS Q16002L-P TMS Q16002R TMS Q16002R-P
E
90° 7/8” 90° 1” 60° 7/8” 60° 1”
N
Transat Stainless Adjustable Top Caps
▪▪316 stainless steel TMS Q30038 TMS Q30039 TMS Q30047 TMS Q30048
TMS Q30074 7/8” TMS Q30075 1” TMS Q30076 1-1/4”
184
® Stainless Steel Performance at Aluminum Prices New unique blade geometry results in the highest performance aluminum propellers on the block. Turning Point offers boaters 4 blade performance without the common top end loss of competitors designs. Unmatched in cornering, acceleration, boat handling, and top speed, these Hustler props outperformed most stainless steel props in recent tests.
Tuned Vents for Fast Hole Shot Turning Point is the only propeller manufacturer to use this race boat proven technology in aluminum propellers to increase low speed acceleration and hole shot. Common on stainless props, we use it to get you on plane faster than any other prop in the market. (selected models only 13” & 14” diameter 17+ Pitch).
Performance Tuned Rake Angles Higher rake angles tighten the vortex produced by the propellers, adding to boat lift and overall performance.
Improve Handling and Boat Lift Through aggressive rake and cupping.
High Flow-Through Barrel Exhaust System Maximizing exhaust flow increases horsepower and top end speed.
Tuned Progressive Pitch Angles Accelerating and channeling water to minimize slip increases performance and fuel economy.
Long Lasting Powder Coated Finish The best looking aluminum props made! Turning Point’s five step process produces a uniform and glossy finish that is durable and resists corrosion better than paint.
Compatible with Competitors’ Hub Kit Systems Works with Mercury® Flo-Torq II®, Michigan Wheel® XHS®, and Solas® Rubex™ hub kit systems. NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
Lifetime Warranty Hub Kits Turning Point offers its unique hub and housing system from 8hp to 300+hp, a range of engines unmatched in the industry. Propeller and Hub Kit systems covered by USA and worldwide patents Utilizing high tech shock absorbing polymers and a solid brass spindle, the Turning Point hubs will not corrode or break like competing hubs, and are covered by an industry leading Lifetime Warranty. Each hub’s one piece design ensures simple housing replacement, making a prop change quick and easy. (All trademarks are the property of their respective owners).
Aluminum Propeller Groups 8-20hp 9”, 10”
9.9-35hp 11”, 13”
25-75hp 8”, 10.5”, 11”, 12”, 13”, 14”, 15”,17”
40-150hp 11”, 13”, 15”, 17”, 19”, 21”, 23” 15”, 17”, 19”
90-300+hp 15”, 17”, 19”, 21”, 23” 15”, 17”, 19”, 21”
HUB kit SYSTEMS
185
MASTERGUARD ® HUB KIT SYSTEMS
Featuring Turning Point Propellers Exclusive lifetime warranty hubs “The Last hub you will have to buy engineered to not let you down”
Turning Point is the only company to offer inventory reducing hub kit and prop housing systems for 8-300hp+ engines with a Lifetime Warranty Hub. Boaters save up to 38% when buying a replacement propeller housing.
500 Series Hub System Works with diamond and square labeled propeller groups 4-3/4” and 4-1/4” gearcases 40 - 300+hp
Turning Point’s Hub Kit Systems are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point’s unique patented one piece hub with glass filled nylon over brass splines eliminates failures commonly seen in multipart “sleeve and spline” designs, and pressed-in rubber hub systems. Turning Point’s 500 series hub Kits (for 4.25 & 4.75 inch gearcases) interchanges with other manufacturers’ propellers. Upgrades and replaces Mercury® Flo-Torq II®, Michigan Wheel XHS®, and Solas® Rubex™ hub kit systems.
10 Series Hub System Works with circle labeled propeller groups 3-1/2” gearcase 25 - 75hp
Eliminate Hub System Vibration and Chatter Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials Premium corrosion resistant brass splines.
20 Series Hub System Works with triangle labeled propeller groups 3” gearcase 9.9 - 35hp
Reduce Gear Shock and Engine/Drive Damage Shock absorbing high-tech polymer cushion.
Reduces Inventory Cost Turning Point is the only manufacturer to offer the hub and housing system in full line of propeller applications.
Easy to Install – Consumer Friendly Clear and easy step-by-step directions coupled with minimal parts makes installation easy.
Increases Performance and Horsepower High-flow through barrel exhaust system maximizes exhaust flow increasing horsepower and top end speed.
200 Series Hub System Works with star labeled propeller groups 2-1/2” gearcase 8 - 20hp Covered by US Patent #6,471,481, #6,685,432, #7,717,678 and worldwide patents with additional patents pending.
186
PICK P O T 2013 for
how to fiNd your boat propeller “15 years and running • Turning Point Propellers is still designing the world’s best performing and highest quality 3 & 4 blade Aluminum and Stainless Steel boat propellers“
1. find your Engine
8 - 20 hp Aluminum Propellers ENGINE BRAND
EVINRUDE® / JOHNSON®: (13 spline) 2 stroke (‘74-’95): 9.9, 15 4 stroke: 8hp (‘96 and newer) / 9.9 & 15hp (‘95-’01) EVINRUDE® / JOHNSON®: (10 spline) 4 stroke: 9.9 & 15 (‘02+) HONDA®: (8 spline) 8hp (‘01 & newer) / 9.9, 15, 20hp. Note: Does not fit 8 Classic, pin drive. MERCURY® & MARINER®: (8 spline, lock nut) 2 stroke: 6hp, 8hp, 9.9hp, 15hp / Sea Pro/Marathon 10, 15hp 4 stroke: 8, 9.9hp (‘95-’04), 15 hp (‘89-’06) MERCURY® & MARINER®: (14 spline shaft by Nissan, cotter pin) 4 stroke Bigfoot (‘05+): 8hp, 9.9hp / 4 stroke (‘07+): 15hp, 20hp NISSAN® & TOHATSU®: (14 spline) 2 stroke: 9.9hp (‘84-’05), 12hp (‘85-’88) / 15 & 18hp (‘85-’05) / 4 stroke: 9.9hp, 15hp, 18hp, 20hp SUZUKI®: (10 spline TYPE M) DT 2 stroke: 9.9 (‘83-’87), 15hp, 15C/ DF 4 stroke: 9.9hp, 15hp Note: Does not fit DT 8C & 9.9C (‘88-’97) YAMAHA®: (8 spline) 2 stroke: 9.9, 15 / 4 stroke: 9.9, 15, 15C, 20hp NISSAN® & TOHATSU®: (12 spline) 2 & 4 stroke: 8hp, 9.8hp MERCURY® & MARINER®: (12 spline, cotter pin) 4 stroke ('05 & newer): 8, 9.9hp
2. buy this hub HUB
PART #
TUR 202
1110 0201
TUR 206
1110 0601
TUR 205
1110 0501
TUR 201
1110 0101
TUR 207
1110 0701
TUR 207
1110 0701
TUR 206
1110 0601
TUR 205
1110 0501
TUR 208
1110 0801
TUR 208
1110 0801
TUR 22
1120 0200
TUR 21
1120 0100
TUR 21
1120 0100
TUR 28
1120 0800
TUR 28
1120 0800
TUR 28
1120 0800
TUR 25
1120 0500
TUR 26
1120 0600
TUR 26
1120 0600
TUR 11 TUR 11
1130 0100 1130 0100
TUR 12
1130 0200
TUR 11
1130 0100
TUR 13
1130 0300
TUR 11
1130 0100
TUR 12
1130 0200
9.9 - 35 hp Aluminum Propellers
EVINRUDE® / JOHNSON®: (14 spline) 2 stroke: 20hp, 25hp ('84 and newer), 25hp commercial ('93-'05), 30hp ('84 and newer), 35hp ('76-'05) / E-Tec: 25, 30hp FORCE®: (10 spline) 25hp ('95-'98) MERCURY® & MARINER®: (10 spline) 2 stroke: 18hp ('80-'85), 20hp ('86 and newer), 25hp ('85 and newer) 4 stroke Bigfoot: 9.9hp, 15hp HONDA®: BF25, BF30 MERCURY® & MARINER®: 4 stroke ('06 & newer, cotter pin shaft): 25hp , 30hp NISSAN® & TOHATSU®: 2 and 4 stroke: 25hp, 30hp YAMAHA®: 2 stroke: 20hp, 25hp, 30hp / 4 stroke: 25hp EVINRUDE® / JOHNSON®: 4 stroke: 25hp, 30hp SUZUKI®: DT 2 stroke ('87 and newer): 20, 25, 25C, 30, 30C DF 4 stroke: 25hp, 30hp
25 - 75 hp Aluminum Propellers
EVINRUDE® / JOHNSON®: 4 stroke: 40 / 50hp FORCE®: 40hp ('95-'98), 50hp ('95-'98), 70hp ('91-'95), 75hp ('96-'98) HONDA®: BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60) MERCURY® & MARINER®: 2 stroke: 30hp ('94+) / 35, 45, 55 / 40, 50, 60 ('77+) / 70hp (up to '83) 4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp NISSAN® & TOHATSU®: 40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B SUZUKI®: DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp DF 4 stroke: 40hp, 50hp YAMAHA®: 2 stroke: 40hp to 55hp / 4 stroke: FT25hp High Thrust, 30hp to 60hp
3. pick your housing pitch DIA X PITCH
9X9 9 X 10
MODEL #
R4-0909 R4-0910
PART #
TUR 2110 0910 TUR 2110 1010
3 Blade 4 Blade Left Rotation Right Rotation (standard)
DIA X PITCH
MODEL #
PART #
9X9 9 X 10
R5-0909 R5-0910
TUR 2111 0910 TUR 2111 1010
DIA X PITCH
MODEL #
PART #
10-1/2 X 11 10-1/8 X 13
R1-1011 R1-1013
TUR 2120 1110 TUR 2120 1310
DIA X PITCH
MODEL #
PART #
10-3/8 X 11 10-3/8 X 13
R2-1011 R2-1013
TUR 2121 1110 TUR 2121 1310
DIA X PITCH
MODEL #
PART #
10-1/2 X 11 10-1/8 X 13
R3-1011 R3-1013
TUR 2122 1110 TUR 2122 1310
DIA X PITCH
MODEL #
PART #
12-1/2 X 8 12 X 10-1/2 10-7/8 X 11 10-3/4 X 12 10-1/2 X 13 10-3/8 X 14 10-1/8 X 15
H1-1208 H1-1210 H1-1011 H1-1012 H1-1013 H1-1014 H1-1015
† TUR 2130 0810 TUR 2130 1010 TUR 2130 1110 TUR 2130 1210 TUR 2130 1310 TUR 2130 1410 TUR 2130 1510
† Does not fit Honda Mercury/Mariner (1977 and older) not available. Yamaha: if propeller strikes trim tab, replace with Yamaha part # 6E5-45371-10. MerCruiser: If propeller strikes trim tab, replace with Mercury part #822777A1.
Exclusive lifetime warranty hubs
“the Last hub you will have to buy engineered to not let you down”
187
No faster prop oN the water
Aluminum designs that out perform Stainless Steel props through squeeze casting and unique blade geometry DIE - CAST
SQUEEZE CAST Turning Point Exclusive Process Applied to all Aluminum Designs Tight Grain · Strong and Stiff · Reduces Flex for Maximum Thrust
25 - 75 hp Aluminum Propellers ENGINE BRAND
EVINRUDE® / JOHNSON®: 2 cyl.: 40hp, 48hp / 50hp ('75-'5) / 55hp ('76-'79) / 60hp, 65hp ('80-'85) 3 cyl. (with small gearcase): 75hp ('75-'85) Sprint and Formula E ('86-'92)
Competitors’ Process · Pockets, Voids, Air Bubbles · Weak and Flexible · Inefficient Transfer of Power · Poor Repairability
HUB
TUR 12
PART #
1130 0200
40-150 hp Aluminum Propellers
EVINRUDE® / JOHNSON®: (13 spline shaft) 2 cyl: 50hp ('71-'74) / 45 to 55hp commercial 3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial 4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O.: 115hp E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10) EVINRUDE® / JOHNSON®: (13 spline shaft) 4 stroke: 60hp, 70hp FORCE® (15 spline shaft): 75hp ('99) / 90hp to 150hp ('95 and newer) HONDA® (15 spline shaft) ('95-'98): 75, 90hp HONDA® (15 spline shaft): P60 / 75, 90 ('99+) / 115, 130hp. (not 115D) MERCURY® & MARINER® (15 spline shaft): (2 and 4 stroke) 40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp 150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.) NISSAN® & TOHATSU® (15 spline shaft): 60C, 70C / 90 to 140hp OMC® (13 spline shaft): Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L SUZUKI®: (13 spline shaft) DT 2 Stroke ('89+): 75 to 140hp / DF 4 Stroke ('98-'09): 60, 70hp YAMAHA® (15 spline shaft): High Thrust: T50, FT60 / 2 stroke: 60 to 100hp / 4stroke: 70 to 100hp YAMAHA® (15 spline shaft): 2 stroke: 115 to 130hp / 4stroke: 115hp
V6 135 to 300hp / Verado 135 to 275hp. Note: Does not fit Pro XS.
MERCRUISER®*:
Alpha One and Bravo One ('83 and newer)
OMC®:
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L
SUZUKI®: DT 2 stroke: 150hp to 225hp VOLVO® PENTA SX & OMC SX COBRA: (19 spline)
('94 and newer): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives.
YAMAHA®:
2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L
MODEL #
PART #
12-1/2 X 8 12 X 10-1/2 12-1/2 X 13 12-1/4 X 15 11-3/4 X 17
H2-1208 H2-1210 H2-1213 H2-1215 H2-1117
TUR 2131 0810* TUR 2131 1010* TUR 2131 1310 TUR 2131 1510 TUR 2131 1710
DIA X PITCH
MODEL #
PART #
14 X 11 14 X 13 13-3/4 X 15 13-1/4 X 17 13-1/4 X 19 13-1/4 X 21 13-1/4 X 23
LE1/LE2-1411 LE1/LE2-1413 LE1/LE2-1315 LE1/LE2-1317 LE1/LE2-1319 LE1/LE2-1321 LE1/LE2-1323
TUR 2143 1111 TUR 2143 1311 TUR 2143 1511 TUR 2143 1711 TUR 2143 1911 TUR 2143 2111 TUR 2143 2311
TUR 503
1150 0300
TUR 506
1150 0600
TUR 501 TUR 501
1150 0100 1150 0100
TUR 507
1150 0700
DIA X PITCH
MODEL #
PART #
TUR 501
1150 0100
13-1/4 X 17 13 X 19
LE1/LE2-1317-4 LE1/LE2-1319-4
TUR 2143 1730 TUR 2143 1930
TUR 505
1150 0500
TUR 503
1150 0300
TUR 506
1150 0600
TUR 500
1150 0000
TUR 505
1150 0500
90-300+ hp Aluminum Propellers
EVINRUDE® / JOHNSON®: V4 with V6 large gearcase: 100hp commercial, 120hp ('85), 130hp ('95-'96), 140hp ('85), Pleasure ('95 and newer): 115hp, 130hp / H.O.: 150, 200, 225, 250hp E-TEC: (25" shaft) 90hp, 115hp, 130hp ('09-'10) / 135hp to 300hp V6: 135hp to 250hp / V8: 250hp to 300hp HONDA®: BF115D, BF135, BF150, BF200, BF225 HONDA®: BF200(13&Newer), BF225 (13&Newer), BF250 (12&Newer) MERCURY® & MARINER®*:
DIA X PITCH
TUR 502
1150 0200
TUR 507 TUR 508
1150 0700 1150 0800
TUR 501
1150 0100
TUR 501
1150 0100
TUR 502
1150 0200
TUR 507
1150 0700
TUR 504
1150 0400
TUR 505
1150 0500
2143 and 2150 housings compatible with Mercury® Flo-Torq II®, Michigan Wheel® XHS®, Solas® Rubex™ RBX™ Hub systems
DIA X PITCH
MODEL #
PART #
15-1/4 X 15 14-1/4 X 17 14-1/4 X 19 14-1/4 X 21 14-1/4 X 23
LE-1515 LE-1417 LE-1419 LE-1421 LE-1423
TUR 2150 1511 TUR 2150 1711 TUR 2150 1911 TUR 2150 2111 TUR 2150 2311
DIA X PITCH
MODEL #
PART #
15 X 15 14-1/2 X 17 14 X 19
LE-1515-4 LE-1417-4 LE-1419-4
TUR 2150 1530 TUR 2150 1730 TUR 2150 1930
DIA X PITCH
MODEL #
PART #
15 X 15 14-1/2 X 17 14 X 19 14 X 21
LE-1515-4L LE-1417-4L LE-1419-4L LE-1421-4L
TUR 2150 1540 TUR 2150 1740 TUR 2150 1940 TUR 2150 2140
TURNING-POINT ®
188
PROPELLERS
Propeller & Hub List Part #
Item #
HUBS
TUR 201 TUR 202 TUR 205 TUR 206 TUR 207 TUR 208
1110 0100 1110 0200 1110 0500 1110 0600 1110 0700 1110 0800
Mercury Hub Evinrude/Johnson Hub Yamaha Hub Suzuki Hub Nissan Tohatsu Hub Nissan Tohatsu Hub
TUR 21 TUR 22 TUR 25 TUR 26 TUR 28
1120 0100 1120 0200 1120 0500 1120 0600 1120 0800
Mercury Hub Evinrude/Johnson Hub Yamaha Hub Honda Hub Suzuki Hub
TUR 11 TUR 12 TUR 13
1130 0100 1130 0200 1130 0300
Mercury, Suzuki Hub Yamaha, Honda Hub Nissan, Tohatsu Hub
TUR 500 TUR 501 TUR 502 TUR 503 TUR 504 TUR 505 TUR 506 TUR 507 TUR 508 TUR 509
1150 0000 1150 0100 1150 0200 1150 0300 1150 0400 1150 0500 1150 0600 1150 0700 1150 0800 1150 0900
Yamaha Hub Honda, Mercury Hub Evinrude, Johnson Hub Evinrude, Johnson Hub Volvo Penta Hub Nissan, Tohatsu, Yamaha Hub Suzuki Hub Honda, Suzuki Hub Honda Suzuki 4 stroke DF90/115 Hub
200 SERIES HUB KITS
20 SERIES HUB KITS
10 SERIES HUB KITS
500 SERIES HUB KITS
Part # TUR 2110 0910 TUR 2110 1010 TUR 2111 0910 TUR 2111 1010
Item # R4-0909 R4-0910 R5-0909 R5-0910
HUSTLER® - Use 200 Series Hub 3BL 9X9 RH Prop Housing 3BL 9X10 RH Prop Housing 3BL 9X9 RH Prop Housing 3BL 9X10 RH Prop Housing
Part # TUR 2120 1110 TUR 2120 1310 TUR 2121 1110 TUR 2121 1310 TUR 2122 1110 TUR 2122 1310
Item # R1-1011 R1-1013 R2-1011 R2-1013 R3-1011 R3-1013
HUSTLER® - Use 20 Series Hub 3BL 10-1/2 X 11 RH Prop Housing 3BL 10-1/8 X 13 RH Prop Housing 3BL 10-3/8 X 11 RH Prop Housing 3BL 10-3/8 X 13 RH Prop Housing 3BL 10-1/2 X 11 RH Prop Housing 3BL 10-1/8 X 13 RH Prop Housing
Part # TUR 2130 1110 TUR 2130 1210 TUR 2130 1310 TUR 2130 1410 TUR 2130 1510 TUR 2130 0810 TUR 2130 1010 TUR 2131 1710 TUR 2131 0810* TUR 2131 1010* TUR 2131 1310 TUR 2131 1510
Item # H1-1011 H1-1012 H1-1013 H1-1014 H1-1015 H1-1208 H1-1210 H2-1117 H2-1208 H2-1210 H2-1213 H2-1215
HUSTLER® - Use 10 Series Hub 3BL 10-7/8 X 11 RH Prop Housing 3BL 10-3/4 X 12 RH Prop Housing 3BL 10-1/2 X 13 RH Prop Housing 3BL 10-3/8 X 14 RH Prop Housing 3BL 10-1/8 X 15 RH Prop Housing 3BL 12-1/2 X 8 RH Prop Housing 3BL 12 X 10-1/2 RH Prop Housing 3BL 11-3/4 X 17 RH Prop Housing 3BL 12-1/2 X 8 RH Prop Housing 3BL 12 X 10-1/2 RH Prop Housing 3BL 12-1/2 X 13 RH Prop Housing 3BL 12-1/4 X 15 RH Prop Housing
Part # TUR 2143 1111 TUR 2143 1311 TUR 2143 1511 TUR 2143 1711 TUR 2143 1911 TUR 2143 2111 TUR 2143 2311 TUR 2143 1111 TUR 2143 1311 TUR 2143 1511 TUR 2143 1530 TUR 2143 1711 TUR 2143 1911 TUR 2143 2111 TUR 2143 2311 TUR 2150 1511 TUR 2150 1711 TUR 2150 1911 TUR 2150 2111 TUR 2150 2311 TUR 2150 1730 TUR 2150 1930
Item # LE1-1411 LE1-1413 LE1-1315 LE1-1317 LE1-1319 LE1-1321 LE2-1411 LE2-1413 LE2-1315 LE1-1315-4 LE2-1317 LE2-1319 LE2-1321 LE-1515 LE-1417 LE-1419 LE-1421 LE-1423 -
HUSTLER® - Use 500 Series Hub 3BL 14 X 11 RH Prop Housing 3BL 14X13 RH Prop Housing 3BL 13-3/4 X 15 RH Prop Housing 3BL 13-1/4 X 17 RH Prop Housing 3BL 13-1/4 X 19 RH Prop Housing 3BL 13-1/4 X 21 RH Prop Housing 3BL 13-1/4 X 23 RH Prop Housing 3BL 14X11 RH Prop Housing 3BL 14X13 RH Prop Housing 3BL 13-3/4 X 15 RH Prop Housing 3BL 13-1/2 X 15 RH Prop Housing 3BL 13-1/4 X 17 RH Prop Housing 3BL 13-1/4 X 19 RH Prop Housing 3BL 13-1/4 X 21 RH Prop Housing 3BL 13-1/4 X 23 RH Prop Housing 3BL 15-1/4 X 15 RH Prop Housing 3BL 14-1/4 X 17 RH Prop Housing 3BL 14-1/4 X 19 RH Prop Housing 3BL 14-1/4 X 21 RH Prop Housing 3BL 14-1/4 X 23 RH Prop Housing 4BL 14X17 RH Prop Housing 4BL 14X19 RH Prop Housing
* Request Items
Lifetime Warranty Hubs SQUEEZE CAST DIE - CAST
Stainless Designs in Aluminum - Squeeze Cast Turning Point Exclusive Process applied to all aluminum props - Squeeze Cast process generates the highest mechanical properties attainable in a cast product, resulting in tighter grain structures. Competitors use old Die Cast processes that results in high blade flex and poor performance.
Stainless Steel Performance at Aluminum Prices!
Aluminum Squeeze Cast for Added Strength
Best “in-class” reversibility
A Turning Point Exclusive process is used to manufacture all aluminum propellers. Squeeze Casting generates the highest mechanical properties attainable in a cast aluminum prop resulting from a tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors still use old Die-Casting processes that produce blades that flex, resulting in overall poor performance.
Recent tests reveal that new Hustler Aluminum Propellers have up to 46% more reverse thrust over competitive propeller designs.
SQUEEZE CAST Turning Point Exclusive Process Applied to all Aluminum Designs Tight Grain • Strong and Stiff • Reduces Flex for Maximum Thrust
DIE - CAST Competitors’ Process • Pockets, Voids, Air Bubbles • Weak and Flexible • Inefficient Transfer of Power • Poor Repairability
New dual geometry 15x15 Left & Right
New 4 Blades for 40-140HP Outboards
DIA X PITCH (rotation)
Part #
Model #
UPC
DIA X PITCH (rotation)
Part #
Model #
UPC
15 X 15 (RH) 15 X 15 (LH)
21501530 21501540
LE-1515-4 LE-1515-4L
652480-102530 652480-102547
13.5 X 15 (RH) 13.25 X 17 (RH) 13 X 19 (RH)
21431530 21431730 21431930
LE1/LE2-1315-4 LE1/LE2-1317-4 LE1/LE2-1319-4
652480-200670 652480-102516 652480-102523
Designed for engines with 4-3/4” Gearcases
See TP catalog page #16 for exact engine applications
Evinrude® 100 - 300HP Honda® 115 - 225HP Johnson® 100 - 300HP Mercury®: 135 - 275HP MerCruiser®: 135 - 300HP+ OMC® 3.0 - 7.5L Suzuki® 115 - 225HP Volvo® 3.0 - 8.2L Yamaha® 150 - 250HP
Designed for engines with 4-1/4” Gearcases
See TP catalog page #14 for exact engine applications
Evinrude®/Johnson® 50 - 140HP Force® 40 - 140HP Honda® 40 - 140HP Mercury® 40 - 140HP Nissan®/Tohatsu® 60 - 115HP Suzuki® 50 - 140HP Yamaha® 50 - 100HP
190
Vaavud / WeatherFlow N
N
W E
W E
Boating Parts & Accessories
WeatherFlow Smartphone Windmeter
VAAVUD Smartphone Windmeters Vaavud Mjolnir The design is inspired by professional cup anemometers, but with two cups instead of three, to make the device pocket friendly and super rugged ▪▪Made of a one-piece durable plastic rotor and low-friction Teflon bearing, the wind meter communicates directly to the magnetic field sensor in your smartphone ▪▪Download the free app on the Apple Store or on Google Play ▪▪Vaavud app gives you a clear overview of average, actual, and maximum wind speed, as well as a real time graph; live map gives you access to measurements made by other Vaavud users globally ▪▪Measures wind speed from 4 to 48 knots (2-25 m/s) ▪▪Works with iPhone 4, 4S, 5, 5C, 5S and all iPads from 2 onwards running iOS 6 or 7 and Samsung Galaxy S3, S4 and HTC One ▪▪Includes neoprene storage pouch VAA VAV-1R Red VAA VAV-1W White
Vaavud Sleipnir The design of the Vaavud Sleipnir wind meter is inspired partly by professional cup anemometers, and partly by a Danish developed wind turbine with vertical blades. The carefully designed, asymmetrical rotor accelerates slightly when the largest surface is hit by the wind. All the features of the Mjolnir above plus: ▪▪Take accurate wind readings from 1-40 m/s, AND measure the wind direction VAA VAV-2G Grey VAA VAV-2R Red
The WeatherFlow Wind Meter is an anemometer that fits in your pocket. It works with Android & iOS devices like iPhone, iPod Touch, and iPads. Download one of the free apps for iOS or Android and plug in your wind meter – it’s really that easy. ▪▪Just plug it in and measure wind speed (from 2 - 125 mph), direction, average & gusts ▪▪Reads in meters/second, miles/hour, knots, kilometers/hour, & beaufort scale ▪▪Accurate to the larger of +/- 0.5% of the reading or 0.2 mph at up to 15° off-axis ▪▪Share your readings with friends, instantly WEA WFANO-01
Weatherhawk
191
WeatherHawk WindMates Swiss-made impeller components, is water resistant, shockproof and floats. Common Features:
WeatherHawk Skymaster Wind/Weather Meter
SPT SM-28 Accuracy:
Wind:............................. Temp/Windchill:........... Relative Humidity:........ Dewpoint/Heat Index:... Barometer:..................... Range:
Wind:............................. Temp:............................ Relative Humidity:........ Dew Point:.................... Heat Index:.................... Barometer:..................... Altitude:........................
+/-3% when aligned with winds axis +/- 2° F +/- 3% +/- 3° F +/- 3 hPa .4-89 MPH +5° - +122° F 0-99% 31.2° to +155° F +69° to 155° F 400 to 1100 hPa -900 to 9000
Response Times:
Current wind:................ 2 second avgerage Avg wind:...................... 5 second Max wind:..................... 2-second gust Power: CR2032 Lithium battery (included) Measures: 5.9 x 2.1 x .85 in Weighs: 3.9 oz
Specifications:
Accuracy: Wind +/- 3% when aligned with winds axis Range: Wind .8-89 MPH Response Times: Current & maximum wind 1-sec Optional Units: Knots, MPH, KPH, Ft/Min, M/Sec, Beaufort Power: CR2032 Lithium battery (included) Measures: 5.5 x 1.75 x .75 (closed) Weighs: 3.4 oz WM-100 WindMate Includes a wind vane to ensure accurate measurements on the winds axis. Unlike other wind meters, the jackknife case allows more precise wind speed readings because the users hand is distant from the wind impeller, which then measures undisturbed air flow. SPT WM-100
WM-200 WindMate All of the WM-100 features above plus:
▪▪Windmeter with wind vane ▪▪Fluxgate compass for digital wind direction ▪▪Reads when held vertically ▪▪Wind direction in degrees & compass points ▪▪Calculates cross wind, head/tail wind ▪▪Use as a bearing compass ▪▪Temp & wind chill ▪▪Backlight
SPT WM-200
WM-350 WindMate All of the WM-200 features above plus:
Includes the Accuweather.com patented Comfort Index, which is the effect of temp, wind speed, relative humidity & sun intensity on the human body and is superior to Heat Index. ▪▪Swiss humidity sensor, lifetime calibrated ▪▪Temp/windchill/relative humidity/ wet bulb/dew point/Delta T SPT WM-350
Boating Parts & Accessories
Unlike other units, the jackknife case gives you the most accurate measurements--your hand’s heat/moisture won’t influence the environmental sensors. The Honeywell humidity sensor and the Swiss-made barometer can be easily re-calibrated, and the unit has a weather alert if the barometric pressure rises or falls 6 millibars over 3-hrs. ▪▪Windspeed (Current, Avg, & Max) ▪▪Temp w/Windchill & Heat Index ▪▪Relative Humidity w/Dewpoint ▪▪Barometric Pressure & 16-Hr History Bar Graph ▪▪Storm Audio Alarm ▪▪Altitude ▪▪Pocket-knife design ▪▪Replaceable 400 hr battery ▪▪Replaceable impeller ▪▪Threaded for tripod mounting ▪▪Floats ▪▪Water resistant to 4” ▪▪1 year warranty
▪▪Current, maximum wind speed ▪▪Average wind speed over 5,10,13 seconds ▪▪Choose any measurement unit ▪▪Reads in tenths ▪▪Replaceable 400-hr Lithium battery ▪▪Easy to read LCD ▪▪Threaded for tripod mounting ▪▪Unique pocket-knife design to protect unit when not in use ▪▪Comes with adjustable lanyard ▪▪2 year warranty
192
Waterline Design N W E
1220 1226
Boating Parts & Accessories
Waterline Mosquito Nets Since the mosquito nets is supposed to be bigger than the hatch (with a small overlap). The size is universal and fits most shapes of hatches: square, round, rectangular and small hatches. Fits all brands of hatches. On smaller hatches the overlap will be a little bigger. Every mosquito net comes with a storage bag. ▪▪Ventilates the boat ▪▪Works on flushed hatches ▪▪Keeps out mosquitos, gnats, sand flies, No-See-Ums, wasp etc. WAT 1220 WAT 1221 WAT 1222 WAT 1223 WAT 1226
Foredeck hatch, 23” x 23” Large hatch, 31” x 31” Small portlight, 12” x 16” Large portlight, 12” x 27” Medium portlight, 10” x 19”
1221
1222 Drawing
1223 Drawing
Features
▪▪Pop up = 5 seconds mounting ▪▪Ventilates the boat (nets) ▪▪Fast mounting with suction cup ▪▪Easy to store, folds to 1/3 ▪▪Works on flushed hatches ▪▪Fits all brands of hatches ▪▪Mounts from the inside
1510
1510 Storage Pouch
Waterline Blackout Curtains Fits both fixed and open able hatches. Since the curtain is supposed to be bigger than the hatch (with a small overlap) the size is universal and fit most shapes of hatches, square, round, rectangular and small. On smaller hatches the overlap will be a little bigger. On deep hatches you need to prolong the suction cup with a small string (incl. in the package). Every curtain comes with storage bag. ▪▪Silver outside keeps heat/cold out ▪▪Works also on deep hatches ▪▪No peering in ▪▪Dark when you sleep WAT 1510 WAT 1515 WAT 1530 WAT 1535
Foredeck hatch, 24” x 24” Large foredeck hatch, 28” x 28” Portlight window, 12” x 16” Large portlight window, 10” x 27”
1515
1530
1535
Rope / Mooring / Anchoring
193
ANCHOR MARINE
194
CHAIN
194
ENGLISH BRAID
195
GLOMA
195
GREENFIELD
195
MAFFIOLI
197
MAX POWER
198
MAXWELL
205
NOVABRAID
210
OSBORNE
213
PANTHER Rope Cutting Gun
213
ROCNA ANCHORS
215
SAMSON
217
SAIL TWINE
219
TITAN SHACKLES
220
TRANSAT ANCHORS
221
TRANSAT FENDER HANGERS
221
194
Anchor Marine / CMP Global
Anchor Marine
CMP Global
CMP Global Grade 30 Galvanized Chain Anchor Marine Step Fenders ▪▪Can be used either as a fender or as a handy step to assist boarding ▪▪3 reinforced eyes for fastening which contributes to stability ▪▪Heavy duty marine vinyl ▪▪Height: 21" Width: 17"
Size
Length
Working Load
Weight per 100’
CHN CMG31/4"X141'
1/4"
141'
1,300 lbs
71 lbs
CHN CMG35/16"X92'
5/16"
92'
1,900 lbs
100 lbs
Anchor Marine Stern Fenders
CHN CMG33/8"X63'
3/8"
63'
2,650 lbs
152 lbs
▪▪1/2" centre rope hole ▪▪4 reinforced eyes for fastening which contributes to stability ▪▪Heavy duty marine vinyl ▪▪L: 21-1/2" x W: 8-1/2" x H: 8-1/2"
CHN CMG31/2"X36'
1/2"
36'
4,500 lbs
265 lbs
CMP Global Grade 43 Galvanized Chain
AMP 0043 White AMP 0043RB Royal Blue
Rope / Mooring / Anchoring
▪▪ISO hot dip galvanized ▪▪Sold by the foot or barrel ▪▪Comes in a re-usable plastic pail
AMP 0203 White AMP 0204 Blue
Part #
▪▪ISO high test, hot galvanized ▪▪Calibrated for windlasses ▪▪High carbon steel ▪▪Sold by the foot or barrel Part #
Size
Length
CHN CMG41/4
1/4”
Cut
CHN CMG41/4”X800'
1/4”
800’
CHN CMG45/16
5/16”
Cut
CHN CMG45/16X300'
5/16”
300'
CHN CMG45/16”X550'
5/16”
550’
CHN CMG43/8
3/8”
Cut
CHN CMG43/8”X400'
3/8”
400’
CHN CMG41/2
1/2”
Cut
CHN CMG41/2”X200'
1/2”
200’
Working Load
Weight per 100’
2,600 lbs
75 lbs
3,900 lbs
107 lbs
5,400 lbs
152 lbs
9,200 lbs
256 lbs
English Braid / Gloma / Greenfield English Braid
195
Gloma
English Braid Whipping Twine Waxed polyester whipping twines in two weights (#4 & #8) of white or solid colours. ▪▪Length: 50 & 25m.
Gloma Anchor Swivels
W E
Standard #4 50m Black #4 50m Blue #4 50m Red #4 50m Yellow HP 50m White Heavy #8 25m
N
ENG 36019010000 ENG 36019010900 ENG 36019010910 ENG 36019010960 ENG 36019010980 ENG 36029010000
▪▪316 stainless steel anchor swivel fitted with double threaded flush fitting pins ▪▪Smooth profile avoids snagging GLO 801 GLO 802 GLO 803
1/4" - 5/16" 5/16" - 3/8" 3/8" - 1/2"
► Also See
Gloma Shackles pg 296
Greenfield
Assorted lengths & colours. ENG 20280022000 ENG 20350015000 ENG 22250030900 ENG 22250030910 ENG 22250030912 ENG 22250030928 ENG 22250030960 ENG 22250030980
K28 White, 2.8mm, 22 meters K35 White, 3.5mm, 15 meters R25 Black, 2.5mm, 30 meters R25 Blue, 2.5mm, 30 meters R25 Navy, 2.5mm, 30 meters R25 Green, 2.5mm, 30 meters R25 Red, 2.5mm, 30 meters R25 Yellow, 2.5mm, 30 meters
Greenfield Anchor Buddy The anchor rope that stretches from 14 feet to 50 feet. Works with ski boats, fishing boats, sail boats, patio boats, rafts, and jet skis up to 4,000 lbs. Works in lakes, rivers, and the ocean. Enables you to anchor straight down. The shock is taken out of your anchor line and the anchor isn't pulled loose in waves and swells as with a straight line.
English Braid 3-Strand Polyester
GRN AB4000-RB
This popular rope is constructed from a special polyester fibre laid into a 3 strand configuration with the appearance of a quality hemp or Jute rope, yet without the disadvantage of instability of a natural fibre rope. The natural appearance of the rope is attractive to individuals looking for a traditional rope, while the spun fibre offers a cover that is softer on the hands and provides additional grip. ▪▪Specific gravity: 1.38 Part #
Size
Breaking Strength (kg)
Length
ENG 47060300000
6MM (1/4")
580
984'
ENG 47080300000*
8MM (5/16")
1,320
984'
ENG 47100220000*
10MM (3/8")
1,500
720'
ENG 47120165000*
12MM (1/2")
2,550
495'
ENG 47140110000*
14MM (9/16")
3,100
360'
ENG 47160085000*
16MM (5/8")
3,800
280'
ENG 47180110000*
18MM (3/4")
4,100
360'
ENG 47200110000*
20MM (7/8")
4,600
360'
ENG 47240110000*
24MM (1")
5,500
360'
* Request Items
Greenfield Grapple Buddy ▪▪Galvanized steel ▪▪Complete with 50' nylon line ▪▪Height: 8-3/4" x Width: 8" GRN GB-G
Rope / Mooring / Anchoring
English Braid Polyester Line
197
Maffioli N E W
Yachting Line RACING
Excellence in rope manufacturing since 1926 New ideas, solid tradition, great experience, advanced technology and materials, strict quality controls: these have been the corner stones for our activity from 1926. Gottifredi Maffioli manufactures a wide range of high quality ropes, braids, twins and twisted yarns made of high tenacity synthetic fibres. Thanks to our extensive experience, our comprehensive range of machinery and our constant activity of testing of new materials and development of innovative techniques, we are capable of producing nearly any type of rope, from tiny sewing threads to large diameter mooring lines.
Our extremely innovative One Design lines are imitated all over the world. We are talking about the famous Swift “concept”, available in the single braid version (Swiftcord) One design line includes also a full range of products specifically designed for these type of boats.
Lightweight, strength, durability and comfort: these are the keywords for Swiftcord. ▪▪Construction: Single braid ▪▪Core: Dyreema® + non slip fibre ▪▪Characteristics: Extremly lightweight, good durability and great comfort Reel ▪▪Sold by the foot 200 m (656') Size
Colour
daN
g/m
MAF TRSWIF050-AZ
5mm
Light Blue
0.835
13.7
MAF TRSWIF050-BK
5mm
Black
0.835
13.7
MAF TRSWIF050-RD
5mm
Red
0.835
13.7
MAF TRSWIF060-AZ
6mm
Light Blue
1.250
19.0
MAF TRSWIF060-BK
6mm
Black
1.250
19.0
MAF TRSWIF080-AZ
8mm
Light Blue
2.300
31.2
MAF TRSWIF080-BK
8mm
Black
2.300
31.2
MAF TRSWIF080-RD
8mm
Red
2.300
31.2
MAF TRSWIF100-AZ
10mm
Light Blue
3.600
46.9
MAF TRSWIF100-BK
10mm
Black
3.600
46.9
Maffioli Whipping Twine ▪▪1.4 mm polyester braid in 20 meter lengths ▪▪Convenient storage/dispensing case MAF TRSCFC0014KTBK Black MAF TRSCFC0014KTWH White
Powergrip 78 is a perfect Solution for high loads halyard: thanks to the excellent characteristics of the Dyneema® SK78 core in addition to the special cover in blend HT Polyester/Cordura® branded fibers. ▪▪Construction: Double braid ▪▪Core: Polyurethane coating Dyneema® SK78 ▪▪Cover: H.T. Polyester + Cordura® branded fibers ▪▪Characteristics: Good abrasion resistance, very good grip for a comfort handling Reel ▪▪Sold by the foot 200 m (656') Part #
Maffioli Swiftcord
Part #
Maffioli Powergrip 78
Size
Colour
daN
g/m
MAF TRPWGR080-AZ
8mm
Light Blue
3.380
45.4
MAF TRPWGR080-GA
8mm
Dark Grey
3.380
45.4
MAF TRPWGR080-RD
8mm
Red
3.380
45.4
MAF TRPWGR100-AZ
10mm
Light Blue
5.150
64.7
MAF TRPWGR100-GA
10mm
Dark Grey
5.150
64.7
MAF TRPWGR100-RD
10mm
Red
5.150
64.7
MAF TRPWGR120-AZ
12mm
Light Blue
6.950
92.1
MAF TRPWGR120-RD
12mm
Red
6.950
92.1
Maffioli Powertech 78 The new Powertech 78 has been designed to offer a perfect solution for both high loads sheets and halyards. The key feature of this versatile rope is heat resistant Technora®/Polyester cover in addition to the high-tech Dyneema® SK78 core. ▪▪Construction: Double braid ▪▪Core: Polyurethane coating Dyneema® SK78 ▪▪Cover: Technora® + H.T. Polyester ▪▪Characteristics: Excellent abrasion and heat resistance, good grip on winches Reel 200 m (656') ▪▪Sold by the foot Part #
MAF TRPWTH080-AZ
Size
Colour
daN
g/m
8mm
Light Blue
3.380
49.7
MAF TRPWTH080-RD
8mm
Red
3.380
49.7
MAF TRPWTH100-AZ
10mm
Light Blue
5.150
70.6
MAF TRPWTH100-RD
10mm
Red
5.150
70.6
daN = deka-Newtons to lbs force (breaking strength) (conversion factor = 2.24) g/m = grams per metre (conversion factor to lbs/100' = 0.0672)
Rope / Mooring / Anchoring
Yachting Line ONE DESIGN
Our Racing line is dedicated to all those sailors who are looking for top performance on board. These products are designed to provide maximum performance on small monotypes and modern cruiser racer. Racing line products offer excellent performance, ensuring extremely low elongation in both racing and cruising.
THRUST IT TO THE MAX
Electric Tunnel Thrusters • Custom designed motor • Maintenance free drive leg • Case-hardened spiro-conical gears • Low noise emission • Lightweight composite construction • No anode, no oil reservoir • Full range for all boat sizes Stern Pod
Control Panels
Tunnel Thruster
• Wireless options • Water resistant • Childproof activation • Auto shutdown • Motor overheat warning
Accessories • Fuses • Tunnel adapters Compact Retractable
VIP Retractable
w w w. m a x - p o w e r. c o m
• Tunnels
MAX Power Thrusters
199
Select the Right Thruster
Rope / Mooring / Anchoring
200
MAX Power
MAX Power Composite Tunnel Thrusters
Electric bow and stern thrusters are the most prevalent thrusters on the market; Max Power’s ultimate advantage is its maintenance free composite drive leg and custom manufactured high efficiency DC motors. Coupled with the Max Power control panel, this new control mechanism extends the thrusters life; programmed logic allows you to sit in your cockpit with confidence while your thruster does the work. ▪▪Custom designed motor ▪▪Maintenance free drive leg ▪▪Case-hardened spiro-conical gears, low noise emission ▪▪Lightweight composite construction ▪▪No anode or oil reservoir CT45
CT 60
CT 35
Rope / Mooring / Anchoring
Part #
MXP 42529
MXP 317603
MXP 42530
MXP 42532
MXP 42533*
Manufacture #
CT 35
CT45
CT 60-12
CT 80-12
CT 80-24
Thrust to (kg/lbs)
35/77
40/88
58/128
69/152
75/165
Propellers
mono
duo
mono
duo
duo
Power (kw/hp)
2.69/3.6
3.23/4.3
4.35/5.8
4.79/6.4
5.28/7.1
Voltage
12
12
12
12
24
Boat Lengths
32’
19'-36'
23’ - 33’
26’ - 40’
26’ - 43’
A/B/C/D (mm)
190/140/210/125
190/140/210/125
210/140/275/185
210/140/275/185
210/140/275/185
E (Thickness)
4-5
4-5
6-7
6-7
6-7
CT 80
Part #
CT 100
CT 225
CT 165
CT 325
MXP 42534
MXP 42535
MXP 317557*
MXP 317558
MXP 42542*
Manufacturer #
CT 100
CT 125
CT 165
CT 225
CT 325*
Thrust to (kg/lbs)
96/212
115/254
160/353
195/430
255/562
Propellers
duo
duo
duo
duo
duo
Power (kw/hp)
7.1/9.5
8.56/11.5
11.88/15.9
14.96/20
17.6/23.9
Voltage
12
24
24
24
24
Boat Lengths
40’ - 50’
40’ - 59’
43’ - 63’
50’ - 68’
65’ - 85’
A/B/C/D (mm)
250/200/365/185
250/200/365/185
250/200/430/250
270/200/405/250
250/250/480/315
E (Thickness)
6-7
6-7
7-8
7-8
9 - 10
* Request Item -Tubes, controls & connection cables are ordered separately for all thrusters-
MAX Power
201
MAX Power Retractable ‘Compact Retract’ Thruster The first electric retractable thruster designed for yachts 37’- 45’, will allow all yachtsmen to benefit from both a thruster and a preserved hull line. ▪▪Compact ▪▪Maximum thrust due to ideal immersion depth ▪▪Lightweight composite materials used ▪▪High resistance spiro-conical gears ▪▪Invisible and simple installation, hull form preserved in original state ▪▪Electronic control box centralizing all functions and security features ▪▪Comes complete with multi-function remote control **Connection cables are ordered separately Part #
MXP 317821*
Power rating (hp/kW)
4.3/5.8
Thrust up to (kg/lbs)
70/154
Propellers
duo
Voltage
12
* Request Item
Max Power´s Stern Pod units have been designed with the aim of simplifying installation. The Stern Pod is a single pre-assembled unit which can be directly fitted from the outside of the transom thus requiring little access to the inside of the boat. Moreover, the Stern Pod has been assembled with its drive leg coupling and motor at the factory, thereby ensuring a guaranteed assembly process. Waterproof to IP65, the thrusters motor is protected from water and the corrosive atmosphere in the bilge. Part #
MXP 317625*
MXP 317626*
MXP 317628*
MXP 317630*
MXP 317631*
MXP 317632*
Manufacturer #
Pod 45
Pod 60
Pod 80
Pod 100
Powd 125
Pod 165
Typical Boat Size
20' - 34’
25' - 39’
28' - 46’
32' - 51’
34' - 59’
40' - 66'
Tunnel Diameter
125 mm
185 mm
185 mm
185 mm
185 mm
250 mm
Thrust up to (kg/lbs)
40 / 88
58 / 128
75 / 165
96 / 211
115 / 253
160 / 352
Hp
4.3
5.8
7.1
9.5
11.5
15.9
Voltage
12
12
24
12
24
24
Weight
21 kg
31 kg
31 kg
41 kg
41 kg
61 kg
* Request Items
Rope / Mooring / Anchoring
MAX Power Composite Stern Pod Tunnel Thrusters
202
MAX Power
MAX Power Control Panels The bow & stern thruster control panel has been designed to extend the life of your thruster through built in safety mechanisms. The weatherproof panels clip on faces are designed to aesthetically integrate into the dashboard of your boat. ▪▪Childproof activation ▪▪Automatic shutdown after 30 minutes of activity ▪▪Remote battery isolator control ▪▪Visual & audio motor overheat alarm ▪▪Plug-n-play connectors and colour coded wiring ▪▪Intelligent time delay between port and starboard thrust MXP 318200 MXP 318201 MXP 318202 MXP 318203 MXP 318204* MXP 318205 MXP 318234
Push button panel, Black Push button panel, Grey Single joystick, Black Single joystick, Grey Double joystick, Black Double joystick, Grey Toggle panel, Black
MXP 312929 MXP 312930
Joystick boot w/o stop, grey Joystick boot w/o stop, black
Parts:
Rope / Mooring / Anchoring
* Request Item
318204
318200
Max Power’s radio remote control is designed to work with the entire range of Max Power tunnel and retractable thrusters. The remote control can also be used to operate other onboard equipment such as: windlasses, passerelles, cranes, etc. ▪▪Supports up to 8 independently controlled channels ▪▪Each receiver can switch four channels (12/24V 5A) ▪▪Each transmitter can handle two receivers (8 channels) ▪▪Digital recognition avoids accidental activation of other systems ▪▪Transmitter power supply: 2 lithium batteries 3V (CR2430) included ▪▪Receiver power supply: 12/24V DC ▪▪Zero power consumption when in standby mode (transmitter) ▪▪Splash proof Complete kit (receiver & transmitter) Spare remote (receiver)
MAX Power Composite Tunnel Thruster Tubes Model Type
CT 35 / CT45
CT 60 / CT 80 / CT 100 / CT 125
CT 165 / CT 225
Diameter
125mm
185mm
250mm
-
-
Tunnels lengths 500mm
MXP 42546
750mm
MXP 42547
MXP 42549
-
1000mm
-
MXP 42550
MXP 42553
1500mm
-
MXP 42551
MXP 42554*
* Request Item
318234
318202
Safety All models incorporate the total logic safety device, enabling communication between thruster and helm. Visual and audio alarms provide a 10-second warning before the overheat shutdown facility is activated.
MAX Power Multifunction 915Mhz Radio Remote Control
MXP 312974 MXP 312970
318205
203
MAX Power
MAX Power Fuses Model Type
CT 35/45
CT 60
CT 80
CT60/80
CT 100
CT 125
CT 165/225
CT 325
Voltage
12V
12V
12V
24V
12V
24V
24V
24V
Fuse Amps
125
160
200
125
315
200
250
400
Fuses
MXP 35021
MXP 35019
MXP 35020
MXP 35021
MXP 35022
MXP 35020
MXP 35027
MXP 35028
Holder Type
T1
T2
T1
T2
Fuse Holder #
MXP 35017
MXP 35018
MXP 35017
MXP 35018
Accessories:
MXP 312882
Fuse extraction handle
Blue Sea Systems ANL Fuses CT 35/45
CT 60
CT 80
CT60/80
CT 100
CT 125
CT 165/225
CT 325
Voltage
12V
12V
12V
24V
12V
24V
24V
24V
250
Fuse Amps Fuses
BSS 5131
300
BSS 5133
300
BSS 5133
200
500
BSS 5129
BSS 5137*
300
BSS 5133
500
BSS 5137*
Rope / Mooring / Anchoring
Model Type
-
-
BSS 5503
Fuse Holder #
* Request Items
MAX Power Accessories
MAX Power Stern Adapters
MXP 312882 Fuse extraction handle MXP 312781 6 wire control loom cable, per foot MXP 317602 Y-Connectors, each MXP MPOP3218** Cable connectors, each MXP 42545 Auto battery coupler 12/24V MXP 315300 Anode for all models MXP 311363 Motor thermo switch MXP 315308 Th ruster controller compl, 2004 Fuse holder shown
MXP 315389* MXP 315392* MXP 35016
MXP 310255 MXP 310254 MXP 310253
Gasket leg/tunnel D125 Gasket leg/tunnel D185 Gasket leg/tunnel D325
MXP 315318 MXP 310376 MXP 35034 MXP 35035 MXP 315321
Leg for CT35 Leg for CT45 Leg for CT60 Leg for CT80/100 Leg for CT165/225
MXP 312053 MXP 35031 MXP 35033 MXP 35030 MXP 312058
Propeller D185 pin 5x40 Propeller D185 with screw Propeller D315 Propeller D125 Propeller pin 4x28 series 35
** Limited Quantities
▪▪ Heavy duty electric switching and battery isloation MXP 318400* MXP 318401*
* Request Items
12V 24V
W
Complete relay CT35/CT45 Complete relay CT60/80 12V Complete relay CT80 24V Complete relay CT100/VIP 12V Complete relay CT125/VIP 24V Complete relay SP225 24V
E
MXP 315325 MXP 315326 MXP 315327 MXP 315328 MXP 315329 MXP 315331
MAX Power Solenoid Switches
N
with extractor
* Request Items
125mm stern adapter 185mm stern adapter Install kit
MAXWELL RC SERIES ROPE/CHAIN WINDLASSES
RC6 SPECIFICATIONS
RC8 SPECIFICATIONS
RC10 SPECIFICATIONS
Model
RC6
Model
RC8 8mm - 5/16”
Model
RC10-8 8mm - 5/16”
RC10-10 10mm - 3/8”
Maximum Pull
300kg - 770lbs
Maximum Pull
600kg - 1320lbs
Maximum Pull
700kg - 1540lbs
850kg - 1870lbs
Static Hold
700kg - 1540lbs
Static Hold
1200kg - 2640lbs
Static Hold
1500kg - 3300lbs
1500kg - 3300lbs
Chain Short Link
6mm/7mm - 1/4”
Chain Short Link
8mm - 5/16”
Chain Short Link
8mm - 5/16”
10mm - 3/8”
12mm - 1/2”
Rope Size (Nylon)
14mm - 9/16”
Rope Size
14mm - 9/16”
16mm - 5/8”
Rope Size (Nylon)
(3 strand or 8 plait recommended)
(3 strand or 8 plait recommended)
Chain Speed (Anchor Retrieval)
24m/min - 79ft/min
Chain Speed (Anchor Retrieval)
32m/min - 105ft/min
Chain Speed (Anchor Retrieval)
24m/min - 79ft/min
24m/min - 79ft/min
Rope Speed (Anchor Retrieval)
21m/min - 69ft/min
Rope Speed (Anchor Retrieval)
28m/min - 92ft/min
Rope Speed (Anchor Retrieval)
20m/min - 65ft/min
20m/min - 65ft/min
Power Supply (DC)
12V or 24V
Power Supply (DC)
12V or 24V
Power Supply (DC)
12 or 24V
12 or 24V
Motor Power
500W
Motor Power
1000W
Motor (Watts)
1000W
1200W
Net Weight
8.5kg - 18.7lbs
Net Weight
16.5kg - 36.3lbs
Net Weight
19kg - 42lbs
20kg - 44lbs
No need to worry about what chain your customer is using, with our revoutionary new rope/chainwheel your customer can use any short link marine chain - G4, Metric, BBB or proof coil. That’s right... no more phone calls “will my 1/4” chain fit this windlass?”
www.maxwellmarine.com
MAXWELL’S REVOLUTIONARY NEW CHAIN WHEEL Maxwell Wave Design™ chainwheel. This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. Visit our website to find out exactly how our chainwheel works
205
Maxwell
Maxwell RC6 Rope/Chain Windlass ▪▪Features Maxwell’s revolutionary, and patented, new Wave Design chainwheel ▪▪Designed with the smaller, trailer boat market in mind ▪▪The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer ▪▪The RC6 is a Low Profile unit (no optional capstan drum) ▪▪Comes with top works, motor/gear box and dual direction solenoid (Switches and circuit breaker are ordered separately) ▪▪Exclusive Maxwell 3 Year warranty ▪▪For complete specifications see previous page MAX RC6-12V
RC10 Series
Maxwell RC8 & RC10 Series Rope/Chain Windlasses
▪▪The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters ▪▪Sleek, Low Profile and MAX-Grip capstan drum versions are available to suit individual user preference. ▪▪Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. ▪▪Dual direction, power up and down operation via helm station controls or foredeck foot switches (available option). ▪▪Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. ▪▪Cone type clutch/brake mechanism permits manual, ‘free fall’ Sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel. ▪▪Exclusive Maxwell 3 YEAR Limited Warranty ▪▪For complete specifications see previous page MAX RC8-6-12V 1/2" rope x 1/4" chain MAX RC8-8-12V 5/8" rope x 5/16" chain MAX RC10-8-12V 5/8” rope x 5/16” chain MAX RC10-8-12VCAP W/Capstan MAX RC10-10-12V* 5/8” rope x 3/8” chain MAX RC10-10-12VCAP* W/capstan
Standard Equipment: Dual direction solenoid pack Circuit breaker/isolator panel Up/down remote control panel Emergency crank/clutch release handle
* Request Items
Dimensions Model
RC6-12V
RC8-8-12V
RC10/8-12V RC10/10-12V
A
7-3/4" (196mm)
8-5/16" (210mm)
9-1/8” (230mm) 3-1/2” (89mm)
B
3-3/16" (80mm)
3-5/16" (83mm)
B (with capstan)
N/A
5-3/4" (146mm)
7” (178mm)
C
5-3/4" (145mm)
6-3/16" (156mm)
6-3/4” (170mm)
D
8-1/8" (205mm)
8-1/4" (208mm)
7-7/8” (201mm)
E
2-1/2" (65mm)
2-1/2" (65mm)
10-3/4” (272mm)
F
1-9/16" (39mm)
1-5/8" (40mm)
16-3/4” (424mm)
Motor offset
N/A
10-3/4" (272mm)
2-1/2” (65mm)
Rope / Mooring / Anchoring
RC8 Series
206
Maxwell
Maxwell Horizontal Rope/Chain Windlasses
HRC 10
Standard Equipment ▪▪Up/down remote control panel ▪▪Dual direction control system ▪▪Circuit breaker/isolator panel ▪▪Exclusive Maxwell 3 Year warranty
MAX HRCFF612V* HRC-6 MAX HRCFF812V HRC-8
N
Specifications
W
HRC10 Series Windlass
E
Rope / Mooring / Anchoring
▪▪Now incorporating Maxwell's automatic free-fall technology (HRC 6/8 only). Simply activate the windlass 'free fall' lever, operate your down control (helm station or foot- switch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor ▪▪Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection. Simple 'bolt down' installation ensures effortless and rapid on-deck HRC 6/8 installation and set up ▪▪Guarranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design ▪▪Integrated composite nylon (HRC 6/8 only), through deck hawse pipe for ease of installation and smooth, snag-free operation ▪▪High efficiency spur gearbox incorporating a robust non-backwind mechanism. High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch ▪▪Emergency 'free fall' function in the event of on board power failure ▪▪Revolutionary new chainwheel ▪▪Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance
All new HRC10 Horizontal Series fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 metres (52 feet), which require a completely above deck installation system. The HRC10’s flawlessly handle rope up to 16mm (5/8") and chain up to 10mm (3/8") in size, including the thick rope to chain splice. ▪▪The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) MAX HRC10812V* HRC10, w/rope drum
* Request Items
Model
HRC-6
Maximum Pull
HRC-8
410kg (900lbs)
Chain
6mm (1/4")
8mm (5/16”)
Rope Size
12mm (1/2”)
14mm (9/16”)
Line Speed Power
33m/min (108ft/min) 12
12/24V
Motor Watts Breaker Weight
600W 50 Amp
HRC-10
700kg (1870lbs) 8mm (5/16") 14mm (9/16") 20m/min (65ft/min) 12/24V 1000W
70 Amp
11.5kg (25lbs)
19kg (42lbs)
Maxwell Capstan Anchormax Winch An extremely versatile vertical or horizontal (clockwise-non-reversing) capstan or general purpose electric winch for use as an anchor winch, pot hauler or davit winch. Utilizes a fully sealed gearbox driven by a vertically mounted, high efficiency permanent magnet motor that generates up to 386 kg (850 lbs) of line pull. Manufactured in durable anodized marine aluminium with chrome manganese bronze top parts. Comes complete with foot switch & circuit breaker/isolator panel ▪▪Exclusive Maxwell 2 Year warranty MAX ANCHORMAX Maximum line pull..........386kg (850lb) Speed............................@ nominal working load 76’/min Voltage..........................12V Power............................600W Weight...........................8kg (17.6lb) Maximum boat LOA.......10m (33ft) Max. boat weight...........4 tonnes
Maxwell
207
Maxwell Auto Anchor 560
Maxwell Standard On/Off Breaker Panels
Panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/ chain rode. ▪▪Preset stopping point and docking alarm on retrieval ▪▪One-touch function to deploy and retrieve a preset length of rode ▪▪Adjustable back lit display in feet, metres or fathoms ▪▪Graphic LCD screen featuring intuitive user interface for simple operation ▪▪Displays windlass speed and direction ▪▪Safety lock to help protect against accidental windlass deployment ▪▪Logs windlass operation hours to help ensure regular windlass maintenance ▪▪Weather cover and choice of black or gray console. ▪▪Kit includes console, sensor and magnet
A thermally operated (manual reset) 12 volt breaker provides reliable, automatic over current protection. This black panel comes complete with a power-on indicator light and is included with all windlasses except the 500 series. ▪▪Panel size: 4" H x 4" W
MAX P102944
500 series: 12 volt include:
*Note A sensor extension cable (ordered separately) must be used to connect the sensor to the console unit (see parts below) 12V or 24VDC
Maxwell Waterproof Foot Switches
Switch with Trim Ring ▪▪Trim ring diameter: 4", depth: 2-1/4" ▪▪S/S wood screws included MAX P19001
Stainless steel trim ring
Switches with Covers
80 amp breaker 135 amp breaker
Maxwell Reversing Solenoids Use these parts on all Maxwell winches if dual direction is required. All models except 500 series: 12 volt include: MAX P19045 12 Volt S.W. reversing solenoid MAX P19001 Foot switch
MAX P100711 P.M. reversing solenoid MAX P19001 Foot switch
Maxwell Nylon Brait Rope and Chain MAX BRC-1/2”X175’ MAX BRC-1/2”X200’ MAX BRC-1/2”X250’ MAX BRC-5/8”X250’
1/2” x 150’ Brait & 1/4” x 25’ chain 1/2” x 150’ Brait & 1/4” x 50’ chain 1/2” x 200’ Brait & 1/4” x 50’ chain 5/8” x 200’ Brait & 5/16” x 50’ chain
▪▪Hinged, protective cover that guards against accidental use of the windlass ▪▪Cover diameter: 4-1/4” with a 3/4" hinge pocket
Maxwell Proset 3-Strand Nylon Brait Rope and Chain
MAX P19006 MAX P100735
Black cover Stainless steel cover
MAX PRC-5/8"X250' MAX PRC-5/8"X350'
MAX 2343 MAX SP1387
Replacement diaphragm Hinged cover, White
Maxwell Pressure Arm Replacement Kit
Parts:
Maxwell Toggle Style Up/Down Remote Panel Designed for use with all models of Maxwell windlasses using a dual direction control kit. Can be wired together for multiple station application. Red light indicates power on. ▪▪Panel size: 3-5/16” H x 2-3/8” W MAX P19220
12 volt
Maxwell Up/Down Control Easy to use, panel-mounted Up/Down switches for remote windlass operation from the helm, fly bridge or cockpit. ▪▪Suitable for use with dual-directional solenoids ▪▪Manufactured from marine-grade materials ▪▪Splash proof ▪▪Suitable for 12 and 24 VDC MAX P102938*
* Request Item
5/8" x 200' Proset & 5/16" x 50' chain 5/8" x 300' Proset & 5/16" x 50' chain
For the RC500/RC800 Freedom series winches. Contains 1 ea. pressure arm, pressure arm clip and clip insulator. MAX P100019
Rope / Mooring / Anchoring
Foot operated, waterproof deck switches for all anchor windlasses. These heavy duty (150 amps continuous) switches do not require additional solenoids. Mounts into a 2" diameter hole. 3/8" stud terminals. 12 to 24 volts.
MAX P100790 MAX P100791
e
H only
HRC10-10
H only
HRC10-8
H only
HRCFF8
H only
HRCFF7
H only
HRCFF6
V only
V only
RC12-12
V only
RC12-10
V only
RC10-10
V only
RC10-8
V only
RC8-8
V only
RC8-6
RC6
V only
♦
♦
♦
♦
■
3500 V and H
■
♦
2500 V and H
■
♦
♦
♦
1500 V only
♦
■
♦
♦
♦
♦
H - Horizontal Configuration
♦
10/11mm 13mm 3/8” 1/2”
♦
■
♦
♦
♦
♦
8mm 5/16”
V - Vertical Configuration
♦
♦
♦
♦
♦
6/7mm 1/4”
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
METERS 4.5 FEET 15 7.6 25
9.2 30
10.7 35
12.2 40
13.7 45
15.3 50
16.8 55
HEAVY DISPLACEMENT - Refers to a vessel which is relatively heavy in weight compared to its overall length
= May be used on larger light displacement vessels providing rode is mainly rope
LIGHT DISPLACEMENT - Refers to a vessel which is relatively light in weight compared to its overall length
6.1 20
18.5 60
20 65
21.5 70
All Maxwell windlasses are RODE counter ready with sensor hole drilled and magnet fitted
22.8 75
and/or high windage will require larger windlasses. All systems assume the use of a chain stopper, chain snubber or mooring cleat to remove the load from the winch when setting or breaking the anchor loose. The maximum pulling capacity of the windlass should not be less than three times the total weight of the ground tackle. Should you require any assistance or information, please do not hesitate to contact Maxwell Marine or any one of our distributors or service centres world-wide.
BOAT LENGTH
Please note: Size, displacement and type of vessel, as well as anchoring conditions, must be taken into consideration when selecting an anchor winch. Vessels of heavy displacement
This chart serves as a basic guide to assist in selecting the appropriate anchor winch system for your boat.
WINDLASS AND CAPSTAN SELECTION CHART
Use of short link chain is essential
CHAIN SIZE
1000 V only
■
Chain
This chart refers to anchor windlass selection only. When selecting a stern capstan for the same boat, Maxwell uses one size smaller drive, or down to a minimum of 50% of the pull rating of the windlass (unless specified otherwise).
■
■
■
■
■
VW10 V only
■
VC
■
500 V only
VW
■
All Rop
Chain
Automatic Rope & Chain
HRC10
Automatic Rope & Chain
HRCFF 6-7-8
AnchorMax
RC12
Automatic Rope & Chain
RC10
Automatic Rope & Chain
RC8
Automatic
Only
VWC
Rope &
Chain
RC6
Series, type & size
WINCH
HWC
Rope &
PERFORMANCE LINES FROM Canada’s Premier roPe manufaCturer
MADE IN
www.novabraid.com
C A N A DA
Manufactured by Novatec Braids Ltd. 234 Water Street, Yarmouth, Nova Scotia, Canada B5A 4P8
210
Novabraid
Novabraid XLE Performer XLE Performer Series is an extra low elongation, 100% polyester double braid. This high tenacity polyester fibre rope is easy to handle and splice while offering maximum abrasion resistance. Colours are made of solution dyed polyester and are available in red, green, blue and black. This super strong, low stretch double braid is ideal for all running rigging applications on performance cruisers and racing boats. Reels are 600'. Order by the reel or by the foot. Size
Colour
Tensile Strength
NBR XLE316BKW
3/16”
Black/White
830 lbs
NBR XLE316BW
3/16”
Blue/White
830 lbs
NBR XLE316GW
3/16”
Green/White
830 lbs
NBR XLE316RW
3/16”
Red/White
830 lbs
NBR XLE316SB
3/16”
Grey/Blue
830 lbs
NBR XLE316WSB
3/16”
White/Grey/Blue
830 lbs
NBR XLE316W
3/16”
White
830 lbs
NBR XLE316WB
3/16”
White/Blue
830 lbs
NBR XLE316WBK
3/16”
White/Black
830 lbs
NBR XLE316WG
3/16”
White/Green
830 lbs
NBR XLE316WR
3/16”
White/Red
830 lbs
NBR XLE014BKR
1/4”
Black/Red
1,950 lbs
NBR XLE014SBK
1/4”
Black
1,950 lbs
NBR XLE014BKW
1/4”
Black/White
1,950 lbs
NBR XLE014BW
1/4”
Blue/White
1,950 lbs
NBR XLE014GW
1/4”
Green/White
1,950 lbs
NBR XLE014SB
1/4”
Grey/Blue
1,950 lbs
NBR XLE014SG
1/4”
Grey/Green
1,950 lbs
NBR XLE014SR
1/4”
Grey/Red
1,950 lbs
NBR XLE014RW
1/4
Red/White
1,950 lbs
NBR XLE014W
1/4”
White
1,950 lbs
NBR XLE014WBK
1/4”
White/Black
1,950 lbs
NBR XLE014WB
1/4”
White/Blue
1,950 lbs
NBR XLE014WG
1/4”
White/Green
1,950 lbs
NBR XLE014WSB
1/4”
White/Grey/Blue
1,950 lbs
NBR XLE014WR
1/4”
White/Red
1,950 lbs
NBR XLE516BKW
5/16”
Black/White
3,465 lbs
NBR XLE516BKR
5/16”
Black/Red
3,465 lbs
NBR XLE516BW
5/16”
Blue/White
3,465 lbs
NBR XLE516GW
5/16”
Green/White
3,465 lbs
NBR XLE516RW
5/16”
Red/White
3,465 lbs
NBR XLE516SB
5/16”
Grey/Blue
3,465 lbs
NBR XLE516SG
5/16”
Grey/Green
3,465 lbs
NBR XLE516SR
5/16”
Grey/Red
3,465 lbs
NBR XLE516W
5/16”
White
3,465 lbs
NBR XLE516WBK
5/16”
White/Black
3,465 lbs
NBR XLE516WB
5/16”
White/Blue
3,465 lbs
NBR XLE516WG
5/16”
White/Green
3,465 lbs
NBR XLE516WR
5/16”
White/Red
3,465 lbs
NBR XLE516WSB
5/16”
White/Grey/Blue
3,465 lbs
Rope / Mooring / Anchoring
Part #
Size
Colour
Tensile Strength
NBR XLE038BKW
3/8”
Black/White
4,680 lbs
NBR XLE038BW
3/8”
Blue/White
4,680 lbs
NBR XLE038GW
3/8”
Green/White
4,680 lbs
NBR XLE038RW
3/8”
Red/White
4,680 lbs
NBR XLE038SB
3/8”
Grey/Blue
4,680 lbs
NBR XLE038SG
3/8”
Grey/Green
4,680 lbs
NBR XLE038SR
3/8”
Grey/Red
4,680 lbs
NBR XLE038W
3/8”
Solid White
4,680 lbs
NBR XLE038WB
3/8”
White/Blue
4,680 lbs
NBR XLE038WBK
3/8”
White/Black
4,680 lbs
NBR XLE038WG
3/8”
White/Green
4,680 lbs
NBR XLE038WR
3/8”
White/Red
4,680 lbs
NBR XLE038WSB
3/8”
White/Grey/Blue
4,680 lbs
NBR XLE038WY
3/8”
White/Yellow
4,680 lbs
NBR XLE716BKW
7/16”
Black/White
6,525 lbs
NBR XLE716BW
7/16”
Blue/White
6,525 lbs
NBR XLE716GW
7/16”
Green/White
6,525 lbs
NBR XLE716RW
7/16”
Red/White
6,525 lbs
NBR XLE716SB
7/16”
Grey/Blue
6,525 lbs
NBR XLE716SR
7/16”
Grey/Red
6,525 lbs
NBR XLE716WSB
7/16”
White/Grey/Blue
6,525 lbs
NBR XLE716W
7/16”
White
6,525 lbs
NBR XLE716WB
7/16”
White/Blue
6,525 lbs
NBR XLE716WBK
7/16”
White/Black
6,525 lbs
NBR XLE716WG
7/16”
White/Green
6,525 lbs
NBR XLE716WR
7/16”
White/Red
6,525 lbs
NBR XLE012BKW
1/2”
Black/White
9,000 lbs
NBR XLE012BW
1/2”
Blue/White
9,000 lbs
NBR XLE012GW
1/2”
Green/White
9,000 lbs
NBR XLE012RW
1/2”
Red/White
9,000 lbs
NBR XLE012SB
1/2”
Grey/Blue
9,000 lbs
NBR XLE012WB
1/2”
White/Blue
9,000 lbs
NBR XLE012WBK
1/2”
White/Black
9,000 lbs
NBR XLE012W
1/2”
White
9,000 lbs
NBR XLE012WG
1/2”
White/Green
9,000 lbs
NBR XLE012WSB
1/2”
White/Grey/Blue
9,000 lbs
NBR XLE012WR
1/2”
White/Red
9,000 lbs
NBR XLE916BKW
9/16”
Black/White
11,250 lbs
NBR XLE916WB
9/16”
White/Blue
11,250 lbs
NBR XLE916WG
9/16”
White/Green
11,250 lbs
NBR XLE916WR
9/16”
White/Red
11,250 lbs
NBR XLE058WB
5/8”
White/Blue
14,400 lbs
Part #
211
Novabraid Novabraid Polyspec
Novabraid Nova Lite HP
Novabraid
A double braided rope constructed with a 100% polyester cover and a 100% Spectra® 900 core. It is designed for general marine, industrial, and commercial applications where extra low elongation and extremely high strength to weight ratios are required. This product often replaces wire of the same diameter. ▪▪Order by the 600' reel or by the foot ▪▪Specific gravity of 1.20 ▪▪High strength to weight ratio ▪▪Extra Low elongation
Colour
Tensile Strength
NBR PS316BGY
3/16”
Blue/Green/Yellow
1,950 lbs
NBR PS316BRY
3/16”
Blue/Red/Yellow
1,950 lbs
NBR PS316WBY
3/16”
White/Blue/Yellow
1,950 lbs
NBR PS316WRY
3/16”
White/Red/Yellow
1,950 lbs
NBR PS014BGY
1/4”
Blue/Green/Yellow
4,500 lbs
NBR PS014GBY
1/4”
Green/Blue/Yellow
4,500 lbs
NBR PS014RGY
1/4”
Red/Green/Yellow
4,500 lbs
NBR PS014WBY
1/4”
White/Blue/Yellow
4,500 lbs
NBR PS014WRY
1/4”
White/Red/Yellow
4,500 lbs
NBR PS516BGY
5/16”
Blue/Green/Yellow
7,500 lbs
NBR PS516GBY
5/16”
Green/Blue/Yellow
7,500 lbs
NBR PS516RGY
5/16”
Red/Green/Yellow
7,500 lbs
NBR PS516W
5/16"
White
7,500 lbs
NBR PS516WBY
5/16”
White/Blue/Yellow
7,500 lbs
NBR PS516WRY
5/16”
White/Red/Yellow
7,500 lbs
NBR PS038BGY
3/8”
Blue/Green/Yellow
9,800 lbs
NBR PS038GBY
3/8”
Green/Blue/Yellow
9,800 lbs
NBR PS038GRY
3/8”
Green/Red/Yellow
9,800 lbs
NBR PS038RGY
3/8”
Red/Green/Yellow
9,800 lbs
NBR PS038WBY
3/8”
White/Blue/Yellow
9,800 lbs
NBR PS038WGY
3/8”
White/Green/Yellow
9,800 lbs
NBR PS038WRY
3/8”
White/Red/Yellow
9,800 lbs
NBR PS716BGY
7/16”
Blue/Green/Yellow
11,700 lbs
NBR PS716RGY
7/16”
Red/Green/Yellow
11,700 lbs
NBR PS716WBY
7/16"
White/Blue/Yellow
11,700 lbs
Part #
Size
Colour
Tensile Strength
NBR LTHP014GBK
1/4”
Green/Black
2,845 lbs
NBR LTHP014GY
1/4”
Green/Yellow
2,845 lbs
NBR LTHP014RBK
1/4”
Red/Black
2,845 lbs
NBR LTHP014RY
1/4”
Red/Yellow
2,845 lbs
NBR LTHP516GBK
5/16”
Green/Black
3,663 lbs
NBR LTHP516GY
5/16”
Green/Yellow
3,663 lbs
NBR LTHP516RG
5/16”
Red/Green
3,663 lbs
NBR LTHP516RY
5/16”
Red/Yellow
3,663 lbs
NBR LTHP516TP
5/16”
Teal/Purple
3,663 lbs
NBR LTHP038GBK
3/8”
Green/Black
5,000 lbs
NBR LTHP038GY
3/8”
Green/Yellow
5,000 lbs
NBR LTHP038RG
3/8”
Red/Green
5,000 lbs
NBR LTHP038RY
3/8”
Red/Yellow
5,000 lbs
Novabraid Sprint Cord Constructed from a combination of Spectra 900 and solution dyed polyester, Sprint Cord is light weight, low stretch, floating, smooth handling, strong and durable. Recommended for use on spinnaker sheet, jib sheet, cunningham, vang and control lines. ▪▪Order by the 600' reel or by the foot Elongation at break 3mm = 13% 5mm = 13% 6mm = 15% 8mm = 17% Size
Colour
Tensile Strength
NBR SPR03B
3mm
Blue
885 lbs
NBR SPR05R
5mm
Red
2,375 lbs
NBR SPR06BK
6mm
Black
2,546 lbs
NBR SPR08B
8mm
Blue
3,407 lbs
Part #
Rope / Mooring / Anchoring
Size
Part #
Nova Lite High Performance is a double braided rope constructed with a multi- filament polypropylene (MFP) cover and a blend of Spectra®and MFP in the core. Designed for applications where a UV resistant, light weight, low stretch and easily handled line is essential. A urethane coating covers the core for protection when the cover braid is stripped. Reels are 600'. ▪▪Order by the 600' reel or by the foot ▪▪Light weight ▪▪Coated core ▪▪High strength ▪▪Low elongation ▪▪No water absorption
212
Novabraid
Novabraid Spectec 12
Novabraid XLE-Z Feel
A hollow braided 12-strand rope using 100% Spectra® 900 fibre with a single ply construction. Spectec-12 yields one of the highest strength to weight ratios available in a synthetic rope. It comes standard with a urethane coating that provides additional abrasion resistance while remaining easy to handle and splice. ▪▪Order by the 600' reel or by the foot
XLE-Z Feel Performer Series is an extra low elongation, 100% polyester double braid. A DuPont Type 77 Dacron yarn is used on its cover and SeaGard polyester in its core. XLE-Z Feel boasts a higher strength than similar spun polyester braids while still providing an excellent feel, wet or dry. Recommended for running rigging applications that are frequently handled such as main sheets, jib sheets and control lines. Order by the 600' reel or by the foot ▪▪High strength ▪▪Low elongation ▪▪Excellent grip
▪▪Specific gravity of 0.98 ▪▪Very high strength ▪▪Extra Low elongation ▪▪Easy handling ▪▪Fully spliceable
Rope / Mooring / Anchoring
Part#
Size
Colour
Tensile Strength
NBR SPEC018B
1/8”
Blue
1,600 lbs
NBR SPEC018BK
1/8”
Black
1,600 lbs
NBR SPEC316BK
3/16”
Black
3,200 lbs
NBR SPEC014BK
1/4"
Black
6,500 lbs
Novabraid Nova Lite Nova Lite is a double braid rope constructed of plaited multi filament polypropylene cover and core. Novabraid’s unique construction process provides for a stronger, lightweight line that is easy to handle. With no water absorption, Nova Lite floats, making it ideal for sheets on dinghies and small keel boats as well as man overboard life saving and heaving lines. Order by the 600' reel or by the foot ▪▪Light weight ▪▪Low stretch ▪▪UV resistant ▪▪Easy running
Size
Colour
Tensile Strength
NBR LT316WB
3/16”
White/Blue
1,514 lbs
NBR LT316WG
3/16”
White/Green
1,514 lbs
NBR LT316WR
3/16”
White/Red
1,514 lbs
NBR LT316YR
3/16”
Yellow/Red
1,514 lbs
NBR LT014OT
1/4”
Orange/Teal
1,510 lbs
NBR LT014PT
1/4”
Purple/Teal
1,510 lbs
NBR LT014YR
1/4”
Yellow/Red
1,510 lbs
NBR LT516OT
5/16”
Orange/Teal
1,730 lbs
NBR LT516PT
5/16”
Purple/Teal
1,730 lbs
NBR LT516RT
5/16”
Red/Teal
1,730 lbs
NBR LT516TP
5/16”
Teal/Purple
1,730 lbs
NBR LT516WT
5/16”
White/Teal
1,730 lbs
NBR LT516YR
5/16”
Yellow/Red
1,730 lbs
NBR LT038OT
3/8”
Orange/Teal
3,220 lbs
NBR LT038TP
3/8”
Teal/Purple
3,220 lbs
NBR LT038W
3/8”
White
3,220 lbs
NBR LT038WB
3/8”
White/Blue
3,220 lbs
NBR LT038WR
3/8”
White/Red
3,220 lbs
NBR LT038YR
3/8”
Yellow/Red
3,220 lbs
NBR LT012YR
1/2”
Yellow/Red
4,100 lbs
Part #
Part#
Size
Colour
Tensile Strength
NBR XLEZ038WBG
3/8"
White/Blue/Green
4,180 lbs
NBR XLEZ716WBG
7/16"
White/Blue/Green
6,025 lbs
NBR XLEZ012W
1/2"
White
8,500 lbs
Novabraid Dinghy Braid Dinghy Braid is carefully constructed with a high tenacity polyester parallel core with an 8 plait polyester cover. Both core and cover are pre-stretched and heat set resulting in a strong, low stretch and easy to handle line. Ideal for control lines on dinghies and small keel boats. Colours are made of polyester and are available in red, green, blue and white. A single green tracer distinguishes Novabraid Dinghy Braid from the rest. ▪▪Order by the 600' reel or by the foot ▪▪Light weight ▪▪Low stretch ▪▪Easy handling
Size
Colour
Tensile Strength
NBR DB532BK
5/32”
Black
850 lbs
NBR DB532R
5/32”
Red
850 lbs
NBR DB316BK
3/16”
Black
1,340 lbs
NBR DB316R
3/16”
Red
1,340 lbs
NBR DB014B
1/4”
Blue
1,800 lbs
NBR DB014R
1/4"
Red
1,800 lbs
Part#
Novabraid / Osborne / Panther Novabraid Nova Gold
Osborne
NBR NG516
5/16”
3,400 lbs
NBR NG038
3/8”
5,000 lbs
NBR NG012
1/2”
8,000 lbs
NBR NG058
5/8”
14,800 lbs
Part No.
(Gauge X Length) Straight:
OSE 509-9G-4"
9 x 4"
OSE 509-10G-33/4"
10 x 3-3/4"
OSE 509-11G-31/2"
11 x 3-1/2"
OSE 509-12G-31/4"
12 x 3-1/4"
OSE 509-13G-3"
Novabraid Shock Cord
Blue
110 lbs
250’
NBR S018BK-250’
1/8”
Black
110 lbs
250’
NBR S018G-250’
1/8”
Green
110 lbs
250’
NBR S018R-250’
1/8”
Red
110 lbs
250’
NBR S018W-250’
1/8”
White
110 lbs
250’
NBR S316B-250’
3/16”
Blue
134 lbs
250’
NBR S316BK-250’
3/16”
Black
134 lbs
250’
NBR S316G-250’
3/16”
Green
134 lbs
250’
NBR S316R-250’
3/16”
Red
134 lbs
250’
NBR S316W-250’
3/16”
White
134 lbs
250’
NBR S014B-250’
1/4”
Blue
226 lbs
250’
NBR S014BK-250’
1/4”
Black
226 lbs
250’
NBR S014G-250’
1/4”
Green
226 lbs
250’
NBR S014R-250’
1/4”
Red
226 lbs
250’
NBR S014W-250’
1/4”
White
226 lbs
250’
NBR S516B-250’
5/16”
Blue
287 lbs
250’
NBR S516BK-250’
5/16”
Black
287 lbs
250’
NBR S516W-250’
5/16”
White
287 lbs
250’
NBR S038BK
3/8”
Black
Length
250'
15 x 2-1/2"
OSE 509-16G-23/8"
16 x 2-3/8"
OSE 509-17G-21/4"
17 x 2-1/4"
Bent:
OSE 508-9G-6"
9 x 6"
OSE 508-10G-5"
10 x 5"
Osborne Sail Palms Fine quality rawhide palms of English manufacture. The iron thimble is hide bound, as are both joints, riveted. OSE 265-L OSE 265-R
Left hand Right hand
Panther
Panther Rope Cutting Gun ▪▪120V, 150W, 1.5 amp ▪▪Makes quick clean cuts in synthetic ropes, lines, and strapping PAN 75-7060B Unit PAN 75-7061 Replacement blade
Rope / Mooring / Anchoring
1/8”
OSE 509-15G-21/2"
W
Colour
NBR S018B-250’
14 x 2-3/4"
E
Size
Tensile Strength
13 x 13"
OSE 509-14G-23/4"
N
Unlike hardware variety shock cord, Nova Shock is braided with colour fast solution dyed polyester cover yarns for superior protection against abrasion and ultra-violet light. The core is comprised of parallel strands of round latex rubber, yielding 85% to 100% elongation and recovery even after exposure to freezing conditions. ▪▪Abrasion resistant ▪▪UV stabilized cover ▪▪Continuous length reels
Part #
Manufactured in England to Osbornes' exacting standards. Nickel-plated fine steel with triangular point.
W
Size
Tensile Strength
Osborne Sailmaker's Needles
E N
A premium double braided nylon rope designed for general marine use where controlled elongation, high strength and abrasion resistance are required. Highly resistant to mildew, rot and most chemicals. Easy to splice. ▪▪Order by the 600' reel or by the foot Part #
213
ROCK SOLID.
215
Rocna
N
NEW for 2015 From ROCNA
E W
The Vulcan Anchor
The best multi-purpose anchor that sets in all ocean floors for vessels of all sizes, from small runabouts to superyachts ▪▪Instant Set: The roll-bar ensures that it always lands on the ideal angle for penetration, plus reinforces the blade for massive strength ▪▪Setting skids elevate the heel and correctly direct the tip, for reliable setting in soft seabeds ▪▪Self-launching: The shank is high tensile steel, and designed so the anchor self-launches ▪▪Rock solid holding power: Of all anchor types, a concave blade gives the greatest resistance, and through clever design Rocna provides the largest blade area possible; the result - massive holding power ▪▪Resistant to wind and tide shifts: The sharp chisel tip combines with a very high weight on tip (average of 33%), which ensures an instant reliable set with every use. ▪▪No lead in the tip and no dragging is also environmentally friendly Dedicated attachment points for: - Buoyed retrieval line - Tandem anchor - Securing to the bow RCA 4KG GALV RCA 6KG GALV RCA 10KG GALV RCA 15KG GALV RCA 20KG GALV RCA 25KG GALV RCA 33KG GALV RCA 40KG GALV
VCA VLC4GS VCA VLC6GS VCA VLC9GS VCA VLC12GS VCA VLC15GS VCA VLC20GS VCA VLC25GS VCA VLC33GS
Also available in stainless steel
SIZING GUIDELINE
Also available in stainless steel
To choose the correctly sized Rocna, match your vessel’s length with the most appropriate displacement range, also bearing in mind conditions of intended use (if in doubt, give preference to the larger anchor model). For multi-hulls: use the chart as instructed, then select the model one size larger. Vulcan or Rocna Models
Unlike other manufacturers, our sizing recommendations are intended to provide an anchor adequate for use in most all conditions. We base our calculations on 50 knots wind, associated surge, and poor holding bottoms. This chart is a guidline only, so if you require further information, please contact your local distributor or visit www.rocna.com.
Vessel Length
Our sizing is conservative.
6
9 Vulcan Only
10 Rocna Only
12 Vulcan Only
≤19,800lb
15
20
25
33
40
ROCNA Model
4
4m - 13’
≤4,400 lb
5m - 16’
≤2,200lb
≤11,000lb
6m - 20’
≤1,100lb
≤8,8000lb
≤15,400lb
7m - 23’
≤4,400lb
≤13,200lb
≤15,400lb
8m - 26’
≤2,200lb
≤11,000lb
≤13,200lb
≤17,600lb
≤22,000lb
9m - 30’
≤8,800lb
≤11,000lb
≤15,400lb
≤10,800lb
≤35,200lb
10m - 33’
≤7,200lb
≤8,800lb
≤13,200lb
≤17,200lb
≤30,800lb
≤55,000lb
≤7,200lb
≤11,000lb
≤15,400lb
≤26,400lb
≤44,000lb
≤56,000lb
≤11,000lb
≤13,200lb
≤22,000lb
≤33,000lb
≤55,000lb
≤15,400lb
≤26,400lb
≤44,000lb
≤88,000lb
≤19,800lb
≤33,000lb
≤72,000lb
18m - 59’
≤26,400lb
≤55,000lb
20m - 66’
≤22,000lb
≤39,600lb
11m - 36’ 12m - 39’ 14m - 46’ 16m - 52’
22m - 72’
≤26,400lb
Anchor Weight
9lb/4kg
13lb/6kg
22lb/10kg
33lb/15kg
44lb/20kg
55lb/25kg
73lb/33kg
88lb/40kg
Recommended Chain
1/4”-6mm
1/4”-6mm
1/4”-7mm
5/16”-8mm
5/16”-9mm
3/8”-10mm
3/8”-10mm
7/16”-11mm
Blade Surface Area*
71in2
91in2
123in2
160in2
177in2
219in2
263in2
301in2
* Weights and areas may vary slightly Vessel displacement units: 1 t (metric tonne) = 1,000 kg = 2,205 lb
Rope / Mooring / Anchoring
The Vulcan is carefully designed to offer the greatest possible compatibility across a wide range of vessel bow configurations, particularly powerboats with a bow pulpit. The Vulcan capitalizes on finely tuned design elements and proven performance advantages for an extremely quick and reliable set across a range of seabeds combined with rock solid holding power. ▪▪Features a unique combination of shank and fluke geometry including an innovative roll-palm at the rear of the fluke - which self-rights the anchor on the seabed without the use of a rollbar. This is assisted by the V-bulb which extends fluke ballast downward to gain maximum leverage and efficiency ▪▪The omission of a roll-bar along with a carefully designed shank profile ensures a snug fit on the bows of a widely expanded range of vessels. Platforms, bowsprits, prods, stays, and other protrusions are easily cleared with no hassle or inconvenience ▪▪The Vulcan’s shank shape encourages self-launching and selfstowing upon retrieval on the majority of bow rollers, with a liquid smooth action, ensuring ease of use for all operators ▪▪In addition to the use of high tensile steel, shank strength is optimized by a unique I+V profile shank design, granting improved resistance to bending courtesy of a computer optimized I-beam geometry. This visually elegant innovation also improves setting performance, with the lower V edge cutting into the seabed and minimizing resistance to a deep and secure burial
The Ronca Original Anchor
Samson
NEW!
WarpSpeed II If you liked it before, YOU’LL LOVE IT NOW ®
Introducing the newest generation of our most popular high-performance running rigging. You’re in for a treat when you experience the difference WarpSpeed® II can make on the course or on a cruise.
FEATURES & BENEFITS:
> High strength and extremely low stretch > Very low creep—provides better stability under static load > Lightweight > Excellent abrasion resistance > Strippable cover with color-coded cores
SamsonRope.com
GET YOURS TODAY AT Distributor Company Name 12345 Main Street #A, Cityname, ST 98999 Dyneema® is a registered trademark of Royal DSM N.V. Dyneema® is DSM’s high-performance polyethylene product.
www.DistributorWebAddress.com 1.800.555.1212
[email protected]
Samson
217
24 Strand Cover A distinct design feature to the Colour Match 24 program is the creation of the 24 strand
braided covers with tension set plying of each 3-ends per strand. This design combination out-performs traditional 16, 20 or 32 strand covers for overall durability, flexibility and grip on winches and stoppers.
Colour Match 24 Samson's exclusive Colour-Match 24 is a clever system for maintaining the colour coding of a line even when the cover has been stripped off. Now you can finally strip the covers off your halyards and still easily distinguish one line from the other without any special gadgets or hardware because the core is urethane coated the same as the tracer colour in the cover. Colour Code BL = Blue GR = Green BK = Black RD = Red BE = Beige WH = White
Samson Ultra-Lite A lightweight, floating double braid with a modest strength/weight and price profile. 24 strand MFP cover and blended core of MFP and SK-60 Dyneema. Ultra-Lite is great for light wind sheets. Black, red & green cover with yellow tracer. Tracer Part #
BK
RD
Strength
Weight/100'
•
•
•
2,200 lbs
1.9 lbs
SAM 441 (COLOUR) 5/16"
•
•
•
2,900 lbs
2.5 lbs
SAM 441 (COLOUR) 3/8"
•
•
•
4,400 lbs
3.2 lbs
Ordering example: If you want to order 50' of 1/4" Black, you would order 50 x SAM 441BK14
Elongation @10%B.S.=0.65% @20%B.S.=1.00% @30%B.S.=1.29%
Samson Warp Speed II
Part #
GR
BK
RD
Strength
Weight/100'
•
•
•
•
5,100 lbs
1.6 lbs
SAM 440 (COLOUR) 5/16"
•
•
•
•
6,200 lbs
3 lbs
SAM 440 (COLOUR) 3/8"
•
•
•
•
9,800 lbs
3.8 lbs
SAM 440 (COLOUR) 7/16"
•
14,000 lbs
5.8 lbs
SAM 440 (COLOUR) 1/2"
•
21,000 lbs
8.2 lbs
Elongation @10%B.S.=0.44% @20%B.S.=0.62% @30%B.S.=0.79% Elastic elongation for rope stabilized from 200D2
Ordering example: If you want to order 50' of 1/4" Blue, you would order 50 x SAM 440BL14
Samson AmSteel Blue - SK-75 AmSteel-Blue is a 12-Strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema SK-75 fibre. This rope yields the maximum in strength-toweight ratio and is stronger than wire rope constructions - yet it floats. Superior flex, fatigue and wear resistance. Colour
Strength
Weight/100'
SAM 872-BL-1/8"
Part #
Blue
2,500 lbs
.5 lbs
SAM 872-BL-3/16" SAM 872-BK-3/16"
Blue Black
5,400 lbs
1.0 lbs
SAM 872-BL-1/4"
Blue
6,800 lbs
1.6 lbs
SAM 872-BL-5/16"
Blue
13,700 lbs
2.7 lbs
SAM 872-BL-3/8"
Blue
19,600 lbs
3.6 lbs
Ordering example: If you want to order 50' of 1/4" Blue, you would order 50 x SAM 872BL14
Elongation @10%B.S.=0.46% @20%B.S.=0.70% @30%B.S.=0.96% Elastic elongation for rope stabilized from 200D2
W
BL
SAM 440 (COLOUR) 1/4"
E
Tracer & Core Colours
N
WarpSpeed® II is a high strength, low stretch, and extremely lightweight double braid that resists abrasion and is very easy to handle. It has a strength member made with Dyneema® SK78 fiber for enhanced creep performance. The upgraded cover design is a colorcoded, flexible, 24-strand polyester that provides good handling, excellent performance in stoppers and clutches, and enhanced abrasion resistance. The Samthane-coated, color-matched core accomodates cover stripping when needed for greater weight savings.
Rope / Mooring / Anchoring
GR
SAM 441 (COLOUR) 1/4"
218
Samson
Samson MLX Designed for the club racer, but also suitable for the performance-oriented cruiser, MLX is a new double braid construction that incorporates a first-of-its-kind core with a polyester cover. The core is a blend of a new and exclusive fiber, Innegra-S, a high modulus polypropylene (HMPP), and Dyneema, a high modulus polyethylene (HMPE). Innegra-S is available to the rope industry only through Samson, and provides a bridge between the performance characteristics and price tags of traditional synthetic fibers, such as nylon and polyester, and highperformance synthetic fibers such as Technora, Dyneema, and Vectran. MLX is a lightweight core-dependent line that has excellent strength and low stretch. The core is Samthane coated to match the color of the cover, making the line strippable for greater weight savings. Cover w/Tracer Colours Part #
BK
SAM 434 (COLOUR) 3/16"
•
SAM 434 (COLOUR) 1/4"
•
SAM 434 (COLOUR) 5/16"
BL
GR
RD
Strength
Weight/100'
•
•
WH
1,800 lbs
1.3 lbs
•
•
3,800 lbs
1.6 lbs
•
•
•
•
4,500 lbs
3.0 lbs
SAM 434 (COLOUR) 3/8"
•
•
•
•
7,200 lbs
3.8 lbs
SAM 434 (COLOUR) 7/16"
•
•
9,500 lbs
5.8 lbs
Elongation @10%B.S.=0.7% @20%B.S.=1.1% @30%B.S.=1.4% Elastic elongation for rope stabilized from 200D2
Ordering example: If you want to order 50' of 5/16" Blue. You would order 50 x SAM 434BL5/16
Rope / Mooring / Anchoring
Samson XLS Extra Created for performance-oriented cruisers and casual racers wanting higher strength and lighter weight than that achieved with a polyester double braid. Like our competition grade running rigging, XLS Extra offers the smooth flexibility of a 24 strand braided polyester cover with a braided core made from a blend of MFP and SK-60 Dyneema. The blended core offers the strength and light weight of Dyneema fibre for performance without the high price of a 100% Dyneema core. Dark Blue Cover W/Tracer Colours BL
BE
RD
Strength
Weight/100'
SAM 442 (COLOUR) 5/16"
Part #
•
•
•
3,500 lbs
3.2 lbs
SAM 442 (COLOUR) 3/8"
•
•
•
4,600 lbs
4.0 lbs
6,100 lbs
5.7 lbs
8,700 lbs
7.7 lbs
SAM 442 (COLOUR) 7/16"
•
SAM 442 (COLOUR) 1/2"
•
•
•
Ordering example: If you want to order 50' of 5/16" Blue. You would order 50 x SAM 442BL516
Elongation @10%B.S.=0.65% @20%B.S.=1.00% @30%B.S.=1.29% Elastic elongation for rope stabilized from 200D2
Samson Pro-Set 3-Strand Nylon
Samson Lash-It
Pro-Set Nylon is a premium 3-strand rope. It is manufactured to minimize shrinkage snagging and hockling and to maximize strength, durability and flexibility. This rope is an excellent choice for chain/rope windlasses. ▪▪Sold by the foot
Made from Dyneema fibre, this twine yields the highest strength, lightest weight, lowest stretch and longest wear life available. The proprietary urethane coating Samthane adds to the twine’s wear life, ensures the knot-holding capability of the twine, and gives the twine its distinctive gray colour. ▪▪Diameter: 1.75 mm ▪▪Average strength: 400 lbs ▪▪Comes in 180' tubes
Dia
Strength
SAM 170-1/2"
Part #
1/2"
6,300 lbs
SAM 170-5/8"
5/8"
10,000 lbs
Samson Nylon Starter Cord A 100% nylon cord with a white braided cover over a twisted core to provide abrasion resistance, body and flexibility. Part #
Dia.
Strength
SAM 580-#3X1000'
3/32"
500 lbs
SAM 580-#4X1000'
1/8"
650 lbs
SAM 580-#5X1000'
5/32"
975 lbs
SAM 811-1.75MM 180'
Samson / Sail Twine Sail Twine
The Samson splicing kit contains five tubular fids for splicing lines of 1/4" (6mm), 5/16" (8mm), 3/8" (9mm), 7/16" (11mm), 1/2" (12mm), along with a pusher and complete instructions for Samson standard eye splice in a convenient plastic tube.
▪▪Pre-waxed, polyester sail twine for whipping, stitching and repairing ▪▪100% continuous filament ▪▪Comes with 15 gauge x 2-1/2" sailmaker's needle ▪▪Put up in 4 oz roll SAI 3MBB-4 SAI 7PB-4
W E
SAM 999-007
N
Samson Splicing Kit
219
40 lb test - 170 yd 100 lb test -110 yd
Samson Splicing Manual Samson ropes are classified as either Class I or Class II ropes, depending on the fibers used. Splicing procedures are different for each class. Always make certain you use the correct splice for the rope you’re working with. A complete guide for correct splicing. ▪▪169 Pages ▪▪Colour rope identification chart ▪▪Colour rope retirement guide SAM 996-006
Rope / Mooring / Anchoring
Titan
Exceeds Industry specifications Engineered in Canada Exceeds Industry Specifications Proof Tested W
E
N
Engineered in Canada Titan Galvanized Shackles Proof Tested ▪▪Hot dip galvanized coating on both the shackle & pin ▪▪Proof tested & load rated ▪▪Working load limit, size and Titan logo stamped on every shackle
Working load limit
Breaking load limit
Description Size
Bail
Pin
Lb - Kg
Lb - Kg
TIT 10319050
1/4” Screw pin HDG
1/4” (6mm)
5/16" (8mm)
1,100-500
6,600-3,000
TIT 10319051
5/16” Screw pin HDG
5/16" (8mm)
3/8” (10mm)
1,650-750
9,900-4,500
TIT 10319052
3/8” Screw pin HDG
3/8” (10mm)
7/16" (11mm)
2,200-1,000
13,200-6,000
7/16" (11mm)
1/2" (13mm)
3,300-1,500
19,800-9,000
Anchor
Part #
TITANMARINEPRODUCTS.COM 7/16” Screw pin HDG TIT 10319053
CANADA METAL (PACIFIC) LTD
Chain
Rope / Mooring / Anchoring
220
Size
TIT 10319054
1/2” Screw pin HDG
1/2" (13mm)
5/16" (8mm)
4,400-2,000
26,400-12,000
TIT 10319062
1/4” Screw pin HDG
1/4" (6mm)
5/16" (8mm)
1,100-500
6,600-3,000
TIT 10319063
5/16” Screw pin HDG
5/16" (8mm)
3/8” (10mm)
1,650-750
9,900-4,500
TIT 10319064
3/8” Screw pin HDG
3/8” (10mm)
7/16" (11mm)
2,200-1,000
13,200-6,000
TIT 10319065
7/16” Screw pin HDG
7/16" (11mm)
1/2" (13mm)
3,300-1,500
19,800-9,000
TIT 10319066
1/2”Screw pin HDG
1/2" (13mm)
5/8" (16mm)
4,400-2,000
26,400-12,000
221
Transat
Transat ‘Bruce’ Style Anchors An excellent quality, highly polished stainless steel or galvanized steel ‘Bruce’ style anchor. Stainless
TMS Q91002S
Galvanized
Weight Kg
A
B
C
D
-
2
13.5
5.5
7.5
8.25
TMS Q91005S
TMS Q91105G
5
18.5
9
12.5
11
TMS Q91007S
TMS Q91107G
7.5
20
10
14.5
11.5
TMS Q91010S
TMS Q91110G
10
23
11.5
15.5
12.5
TMS Q91113G
13
22.5
11
15.5
12.5
TMS Q91015S
TMS Q91115G
15
26
14.5
17
14.5
TMS Q91020S
TMS Q91120G
20
28
15.5
19
16
TMS Q91030S
TMS Q91130G
30
30
16
22
17
-
'Bruce' Style Anchor Selection Guide Anchor (Working)
Boat length
Beam Sail
Beam Power
Rode Dia.
Chain Dia.
kg~lb
kg~lb
m~ft
m~ft
m~ft
mm~ins
m~ft
Chain Length m~ft
2~4.4
2~4.4
5~16
2.0~6.6
2.2~7.2
9~0.31
5~0.20
2.0~6.6
5~11
2~4.4
7~23
2.7~8.9
2.9~9.5
10~0.39
6~0.24
2.6~8.5
7.5~16.5
5~11
9~29
3.1~10.2
3.4~11.2
12~0.47
7~0.28
3.0~9.8
10~22
5~11
10~33
3.4~11.2
3.7~12.1
14~0.55
8~0.31
3.2~10.5
15~33
7.5~16.5
12~39
3.8~12.5
4.2~13.8
16~0.63
9~0.35
3.7~12.1
20~44
10~22
14~46
4.2~13.8
4.6~15.1
18~0.71
10~0.39
4.0~13.1
30~66
15~33
18~59
4.9~16.1
5.4~17.7
22~0.87
12~0.47
4.5~14.8
50~110
20~44
25~82
5.8~19.0
6.7~22.0
26~1.02
16~0.63
5.0~16.4
The anchor size given above assumes winds up to 60 mph, some protection from seas, fair holding ground, and operation at scope adequate to develop full holding power. Where a vessel has unusually large superstructure or heavy displacement, use a size heavier. Vessels built to classification society requirements have anchor weights stipulated by the societies. For optimum performance a close fitting shackle should be used, otherwise the shackle should be centralised by means of galvanized washers. The mooring lines should have sufficient elasticity to minimise shock loading on the anchor and on the boat fittings due to wind and wave surges. Chain of sufficient length to provide an adequate catenary, or nylon rope of sufficient length to provide an equivalent effect under load is recommended. Where nylon rope is used, a short length of chain should be included at anchor end to resist chafing of the sea bed as recommended in table above.
Transat Fender Hanger Solid one piece plastic construction. For rope sizes to up to 1/2” and rails up to 1”. ▪▪Finger tip adjusting ▪▪No moving parts - nothing to break ▪▪Durable - high impact UV protected ▪▪Secure - will not slide or scratch ▪▪Flexible - 1/4” to 1/2” rope of any material ▪▪Value - no more lost fenders ▪▪Versatile - Use as a tarp/load tiedown TSM FH01
Rope / Mooring / Anchoring
Anchor (Storm)
www.railblaza.com
PO Box 434, Silverdale 0950, Auckland, NZ 6 Tavern Rd, Silverdale 0932, Auckland, NZ
[email protected] +64 9 426 1475 Fax: +64 9 426 1477
www.facebook.com/RAILBLAZA For competitions, tutorials, pictures and event news!
Installation & Demo Videos! www.youtube.com/railblaza
DIGITERATI
www.railblaza.co
Some StarPort accessories come in both black and white. For up-to-date option dimensions and specifics, check out our website!
C-Tug Trolley
The New Zealand made C-TUG is the best, most versatile and durable kayak trolley on the market. It carries up to 120kg (300lbs), dismantles in under 20 seconds to fit into a kayak hatch and won’t corrode. Part no: 50-0001-71 Packaged box size: 580mm x 270mm x 200mm (23” x 10.5” x 8”) 4.3kg (10lbs)
RAILBLAZA C-TUG landscape A4.indd 1
4/02/15 12:10
RAILBLAZA reserve the right to change specifications, product descriptions and model applications at any time without notice and without further obligation. We assume no liability for any errors in listings, specifications, part numbers or model application
Postal: Factory: Email: Ph: Web:
® RAILBLAZA LTD
Kiwi Wheels
Puncture free with hi-grip rubber tread. If you have an old C-TUG with pneumatic wheels and want to upgrade, all you do is clip off your old wheels, and clip on the new ones, easy as!! Part no: 50-0002-71 (Supplied as a pair) Dimensions: Dia. 260mm (10”), Width. 90mm (3.5”)
WWW.C-TUG.COM
Made in New Zealand
• Reinforced composite material • Tool-free assembly • Dismantles in under 20 seconds • Fits inside kayak hatch • Thermo-bonded elastomeric hull pads • Stainless steel reinforced axles • Puncture-free wheels with hi-grip rubber tread • 2.4m (7.5’) strap with cam-lock buckle • Adjustable kick-stand • Light weight 4.3 kg (10lbs) and easy to handle • 120kg (300lbs) static loading
The C-TUG kayak trolley is designed and manufactured in Napier, New Zealand. Unlike any other trolley in the paddle sport arena today, C-TUG continues to amaze sport enthusiasts with its rugged appeal, incredible strength and satisfying good looks.
The Ultimate Kayak & Canoe Trolley
Boats / Motors
223
C-TUG
227
FORESPAR Davits
227
LEHR Propane Outboards
225
ODYSSEY Inflatables
228
THE
WORLDS FIRST PROPANE POWERED OUTBOARD ENGINES
Boats / Motors
224
LP2.5
LP5.0
LP9.9
Twist N’ Go 1lb disposable fuel bottle
LP15
www.golehr.com Remote auxiliary tank for longer range
225
LEHR
LEHR Propane Powered Outboard Motors ▪▪World’s first propane powered outboard marine engine ▪▪Great for sailboats, dinghies, tenders, fishing boats and other small watercraft ▪▪Powerful 4-stroke engine uses 110 octane fuel but is eco-friendly and produces zero evaporative emissions ▪▪Runs on either a 16.4 oz. portable camping bottle or refillable standard tanks ▪▪Easy, no choke start with no priming and no carburetor gum up ▪▪No winterizing ▪▪3-year limited manufacturer’s warranty Specs
LP5.0
LP9.9
LP15
4-stroke OHV
4-stroke OHV
4-stroke SOHV
4-stroke SOHV
2.5
5
9.9
15
Displacement
4.39 cu in
6.83 cu in
12.94 cu in
19.7 cu in
Bore x Stroke
2.12" x 1.37"
2.32" x 1.61"
2.32" x 1.61"
2.32" x 2.32"
1
1
2
2
4000 - 4500
4000 - 4500
4000 - 5500
4500 - 5500
Manual
Manual
Manual or Electric
Manual or Electric
Wet Sump
Wet Sump
Wet Sump/ Pressure Lubricated
Wet Sump/ Pressure Lubricated
Controls
Tiller Handle
Tiller Handle
Tiller Handle or Remote
Tiller Handle or Remote
Exhaust
Above Propeller
Above Propeller
Through Propeller
Through Propeller
F-N
F-N-R
F-N-R
F-N-R
37.4 lbs
48.4 lbs
88 lbs
110 lbs
Engine Type Horsepower Rating
Cylinders RPM Range Starting Lubrication
Gear Shift Weight
LEH LP2.5S
2.5 & 5 hp only
LEH LP5.0S
LEH LP9.9S
LEH LP15S
Short Shaft (15")
LEH LP5.0L
LEH LP9.9L
LEH LP15L
Long Shaft (20")
Electric Start
LEH LP9.9ES
LEH LP15ES
Short Shaft (15")
Electric Start
LEH LP9.9EL
LEH LP15EL
Long Shaft (20")
Remote Electric Start
LEH LP9.9ERS
LEH LP15ERS
Short Shaft (15")
Remote Electric Start
LEH LP9.9ERL
LEH LP15ERL
Long Shaft (20")
Remote Electric Start Internal Battery
LEH LP9.9ES-IB
LEH LP15ES-IB
Short Shaft (15")
Remote Electric Start Internal Battery
LEH LP9.9EL-IB
LEH LP15EL-IB
Long Shaft (20")
Manual Start Manual Start
25 hp Available Spring 2015
LEHR Propane Outboards are sold through a network of Stocking Dealers Ask about becoming a Dealer
Boats / Motors
LP2.5
226
LEHR
Boats / Motors
LEHR Accessories LEH LPH4 LEH LPH10 LEH LPHLD10 LEH LPCP10-1 LEH LPTP10
Propane connect hose 4' Propane connect hose 10' Liquid propane connect hose 10' Remote propane connector plug Rubber propane tank plug
LEH LPK10 LEH LPCP10 LEH LPTP10 LEH OB 072.3-051 LEH OB212.3-069 LEH LPW2.5 LEH LPW5.0 LEH LPW9.9
Safety stop tether Brass plug propane connector Rubber propane tank plug Zinc anode, 2.5/5.0 Zinc anode, 9.9 Water pump impeller kit 2.5HP Water pump impeller kit 5.0HP Water pump impeller kit 9.9HP
LEH LPPH5.0 LEH LPPH9.9
LP2.5-LP5.0 propeller hardware kit LP9.9 propeller hardware kit
LEH LPP2.5 LEH LPP2.5A5
LP2.5 prop 7.25 x 6, 3 blade, w/cotter pin LP2.5-LP5.0 prop 7.25 x 5, 3 blade
LEH LPP5.0 LEH LPP5.0A7
LP5 prop 7.5 x 7, 3 blade, w/cotter pin LP5 prop, 7.25 x 7, 3 blade
LEH LPP9.9B7 LEH LPP9.9B8 LEH LPP9.9B9
LP9.9 prop, 8.5 x 7, 3 blade LP9.9 prop, 8.5 x 8, 3 blade LP9.9 prop, 8.5 x 9, 3 blade
LEH LPP15C10 LEH LPP15C11 LEH LPP15C410 LEH LPP15C411 LEH LPP15C47 LEH LPP15C48 LEH LPP15C49 LEH LPP15C7 LEH LPP15C8 LEH LPP15C9
LP15 prop, 9.25 x 10, 3 blade LP15 prop, 9.25 x 11, 3 blade LP15 prop, 9.25 x 10, 4 blade LP15 prop, 9.25 x 11, 4 blade LP15 prop, 9.25 x 7, 4 blade LP15 prop, 9.25 x 8, 4 blade LP15 prop, 9.25 x 9, 4 blade LP15 prop, 9.25 x 7, 3 blade LP15 prop, 9.25 x 8, 3 blade LP15 prop, 9.25 x 9, 3 blade
LEH LPP15HT45 LEH LPP15HT47
LP15 high thrust prop, 10 x 5, 4 blade LP15 high thrust prop, 10 x 7, 4 blade
LEH COWLING CLIP RETRO 5 cowl clip replacement kit LEH DEALER MKTG.KITS Dealer marketing kits LEH SAWHORSE ENGINE STAND 3-engine stand
LEHR Side Mount Remote Shifter ▪▪Remote control with 16' harness ▪▪Required for 9.9ERS, LP9.9ERL, LP15ERS and LP15ERL
LEH LPRC16
LEHR Fibreglass Propane Tanks ▪▪Visible gas level ▪▪Non-corrosive 3 layer composite ▪▪Ergonomic easy carry handles ▪▪36% lighter than steel ▪▪DOT approved ▪▪Pre-purged cyclinder
Net Propane
Dia
O.L.
Draw Type
LEH LPT11
11 lbs
12"
15"
Vapour
LEH LPT17
17 lbs
12"
18.1"
Vapour
LEH LPT31LD
31 lbs
12"
28.3"
Liquid
Part #
► Note
Liquid draw propane tanks use a liquid draw valve and are designed to be mounted horizontally.
► Also See
Aluminum Propane Tanks pg 124
► Also See
Propane Tank Holders pg 175
C-Tug / Forespar
W E
▪▪Most versatile and durable kayak trolley on the market ▪▪Lightweight and easy-to-handle ▪▪Reinforced composite material ▪▪Thermo-bonded elastomeric hull pads ▪▪Puncture-free wheels with hi-grip rubber tread ▪▪Stainless steel reinforced axles ▪▪7-1/2’ strap with cam-lock buckle ▪▪Adjustable kick-stand ▪▪Tool-free assembly ▪▪Dismantles in under 20 seconds; fits inside kayak hatch ▪▪Carries up to 300 lbs ▪▪Weight: 9 lbs ▪▪Made in New Zealand ▪▪5 year warranty
N
C-Tug Kayak Trolley
227
CTG 50-0001-71 Kayak/trolley
Parts:
CTG 50-0002-71 CTG CT-1002 CTG CT-1003 CTG CT-1004 CTG CT-1018
Puncture free wheels (pr) Cross beam Kick stand Hull pad Strap kit
Forespar W
E
N
Fits most popular inflatable dinghies, both hard and soft bottomed. Mount it directly to your swim platform, where it holds the dinghy securely and tightly against the swim step, making it easy to get in and out, or to transfer equipment. The dinghy then rotates out of the water for easy storage and no towing. ▪▪Easy grip design for simple one-hand operation. ▪▪Convenient integrated handles in the mounting pads help entering, exiting, and maneuvering. ▪▪Provides safer entry to and exit from your inflatable dinghy. ▪▪Fully compatible with other snap davit systems. ▪▪Solid stainless and UV resistant composite construction ▪▪No loose parts to drop in the water ▪▪Includes two glue-on dinghy pads with SS yokes, two snap davit heads for yacht, and all hardware, fasteners and instructions. Adhesive kit included ▪▪For inflatable dinghies up to 175 lbs total weight (79 kg) and up to 11 feet (3.3 m) in length FRS 153470
Forespar QUIK Davit Fast Kit With the Fast Kit installed, this low profile stainless steel bracket/adapter system makes it easy to move around your swim platform and allows quick, easy removal and storage of the davit heads. ▪▪Fast kit shoes (2) ▪▪Fast pins w/ wire lanyards (2) ▪▪Fasteners (8 sets) ▪▪Fast pin water barriers (2) FRS 153477
Boats / Motors
Forespar QUIK Davit Kit for Inflatable Dinghies
228
Odyssey
Walker Bay Odyssey AIR FLOOR Series The new Odyssey line is perfect for those looking for simplicity and performance in a stowable tender. Light and compact, the Odyssey series is the ultimate “boat in a bag”. All Odyssey models roll up quickly and easily into a storage/carry bag (included), making it easy to get on the water faster or store it when not in use.
Inflatable Floor High Pressure 11psi Inflatable Floor: Constructed from two layers of durable copolymer polyester fabric, joined by thousands of dropstitch fibres and inflated to form a lightweight rigid deck, the Air Floor Series offers performance, combined with effortless setup and takedown.
Features Overview
Boats / Motors
▪▪Collapsible and light RTM molded fibreglass transom ▪▪Modern tapered tube design leaves more room in the bow and space for a fuel tank ▪▪Larger diameter tubes for more buoyancy and carrying capacity ▪▪“Easy Lift” transom lip carrying point and bow lifting handle ▪▪Built in transom Trim Tabs for more lift and earlier planing ▪▪German made Heytex PVC ▪▪Light weight rub rail ▪▪Two piece light weight oars ▪▪RTM molded fiberglass seat ▪▪One-way drain plug ▪▪2 rear carrying handles, 4 webbing handles & 1 bow handle ▪▪4 davit lifting points, 2 towing D-rings ▪▪High pressure hand pump ▪▪Repair kit ▪▪Easy to stow storage/ carrying bag ▪▪Fuel tank tie-down straps in bow ▪▪Short shaft recommended
ODY 5001080001 ODY 5001080002 ODY 5001080003
7'11" 240AF 8'10" 270AF 10'2" 310AF
ODYSSEY/AIRIS Hand Pump ODY 1000330001
Superior Fabric Heytex PVC – Walker Bay uses the best name brand PVC in the industry, German made Heytex PVC.
LOA
310 AF PVC
270 AF PVC
240 AF PVC
10’2” / 310 cm
8’10” / 270 cm
7’11” / 240 cm
Beam
61” / 154 cm
61” / 154 cm
60” / 153 cm
Tube Diameter
16.5” / 42 cm
16.5” / 42 cm
16.5” / 42 cm
Air Chambers
2+2
2+2
2+1
Weight
67 lbs / 30 kg
63 lbs / 29 kg
57 lbs / 26 kg
Max Passengers
4
3
3
Max Payload
1430 lbs / 650 kg
1188 lbs / 540 kg
924 lbs / 420 kg
Recommended HP
8
6
5
Max HP
10
8
6
Sausage Keel
Yes
Yes
No
Giftware
229
NAUTICALIA
230
L’il SUCKER
245
230
Nauticalia Nauticalia Yachting Cap
Nauticalia Yachting Caps These caps are made from strong, 100% cotton twill material, with a sweat-resistant hem and reinforcing sewn around the inside. The brims are plastic (not cardboard), and covered in soft fawncoloured suedette on top with navy covered twill beneath (to reduce glare on the eyes). The size-adjusting strap has a metal buckle, and metal sleeve for tucking away the end neatly. Each is heavily embroidered with a crew position in cotton thread.
Giftware
NAT 6203 Captain NAT 6204 Skipper NAT 6205 Crew NAT 6206 First Mate NAT 6208 Cabin Boy NAT 6225 Ancient Mariner NAT 6226 Dangerous Cargo NAT 6227 This Way Up NAT 6228 Wreck NAT 6229 Skull & Cross Bones NAT 6223 Knackered Sailor NAT 6235 Nobody’s Perfect NAT 6236 Old Sea Dog NAT 6238 Captains Word NAT 6239 Thinking Cap NAT 6270 Drunken Sailor NAT 6271 Buoy Racer NAT 6272 Old Salt NAT 6273 Bottoms Up NAT 6274 Galley Slave NAT 6275 I’d Rather Be
Nauticalia Woolen Breton Style Caps This is the peaked boatman’s cap that everyone copies, but only the French get right. The original Breton 70% navy wool and unmatched anywhere. Blue or Black. Sizes (measure around your head just above the eyebrows and ears). NAT 6254/56 NAT 6254/57 NAT 6254/58 NAT 6254/59 NAT 6254/60 NAT 6255/56 NAT 6255/57 NAT 6255/58 NAT 6255/59 NAT 6255/60
Navy Size 56 Navy Size 57 Navy Size 58 Navy Size 59 Navy Size 60 Black Size 56 Black Size 57 Black Size 58 Black Size 59 Black Size 60
Nauticalia Captains Hats For the fair-weather boating man, there is a crisp white cotton cap with a shiny peak, yellow braiding, embroidered badge and goldcoloured anchor. NAT 6252/56 NAT 6252/57 NAT 6252/58 NAT 6252/59 NAT 6252/60
Size 56 Size 57 Size 58 Size 59 Size 60
The bulk of the cap is made from strong, 100% cotton twill material, with a sweatresistant hem and reinforcing sewn around the inside. The brims are plastic (not cardboard), navy-coloured and embroidered with gold oak leaves and acorns. This is a symbol of high rank in the American navy, probably derived from the fact that the best ships were traditionally made from oak. The size-adjusting strap has a metal buckle, and metal sleeve for tucking away the end neatly. One size fits all. NAT 6266
Nauticalia Embroidered Knitted Beanie Hats Made from a double layer of knitted acrylic, our beanie hats are very warm and durable. Available plain, or with our most popular ranks and phrases embroidered (not printed) in contrasting white thread. ▪▪Navy blue (except Skull & Crossbones (6320), which is black) ▪▪100% acrylic ▪▪One size fits all (adult) NAT 6310 Captain NAT 6311 Skipper NAT 6312 Firstmate NAT 6313 Crew NAT 6314 Cabin Boy NAT 6315 Wreck NAT 6316 Ancient Mariner NAT 6318 Old Seadog NAT 6319 Captain’s Word NAT 6320 Skull & Crossbone
Nauticalia Captain’s Socks For the directionally challenged! Colour coded socks to identify Port (red) and Starboard (green). At sea, an emergency can happen at any time, and it is vital that everything aboard can be clearly identified and described. Where ‘left’ and ‘right’ could lead to confusion, ‘port’ and ‘starboard’ are perfectly clear and unambiguous to a seafarer. Fits sizes 6-11. Made from 60% cotton 40% nylon. NAT 6505
Nauticalia Crew Socks A subtle way to denote rank, and make pairing up easy! ▪▪70% cotton, 29% polyamide, 1% elastane ▪▪To fit shoe sizes 6-11 NAT 6330 Captain NAT 6332 First mate NAT 6333 Skipper NAT 6335 Ancient Mariner NAT 6336 Port & Starboard NAT 6337 Code Flag L & R
Nauticalia N E W
Nauticalia SafaSail Caps - Head Protection Designed for Sailors There are numerous safety hazards on board – being hit by the boom for example – yet sailors are often reluctant to wear safety helmets as they can be heavy, uncomfortable and unattractive.
A large peak protects against bright sunshine, or a narrow peak version to enable the helm to look up and see the wind indicator at the top of the mast. NAT 5165 NAT 5166 NAT 5167
Navy/Blue, large peak Navy/Red, large peak Navy/Red, narrow peak
Rear
Keep clothes off the deck and receive fair warning of 'I haven't a thing to wear' status! This laundry bag in sailbag style also has a drawstring to keep odours in, and is made from very strong 200 denier nylon. ▪▪22x35"
Black, x 1 Black, x 1.5 Black, x 2 Black, x 2.5 Black, x 3 Black, x 3.5 Tortoiseshell, x 1 Tortoiseshell, x 1.5 Tortoiseshell, x 2 Tortoiseshell, x 2.5 Tortoiseshell, x 3 Tortoiseshell, x 3.5
We don’t need to tell you how useful a bucket can be and you’ll also know what a nuisance they are to store, especially on board a boat or caravan - where they tend to get filled up with other stuff...well not this one! In use, it has a capacity of 11 litres, but folded up in its bag, measures just 1½” thick. The outward pressure of the contents keeps the sides stable. ▪▪Each with their own storage bag ▪▪Measures 12” tall, 11” diameter when in use NAT 3185B Blue NAT 3185G Green NAT 3185R Red NAT 3185Y Yellow
Nauticalia Sea-Searcher Magnet The side plates channel the power so that in perfect contact it has a capacity of up to 140-lb, yet is compass safe at six feet. ▪▪Measures: 4” x 3.25” x 1.25” ▪▪Weight: 2-1/2 lbs NAT 3101
NAT 90121
Please ask for a Nauticalia Catalogue for a full listing of products
Giftware
Nauticalia Laundry Bag
W
NAT 6224
Bottom
E
An excellent quality cap made from 100% cotton twill with a suedette brim. Nelson's immortal signal from the Battle of Trafalgar, "England Expects...", is embroidered in colour across the front - perfect for cricket, rugby and football internationals! ▪▪One size fits all
▪▪LED technology ▪▪Use in low light to enhance reading ▪▪Reduces eye strain ▪▪Comfortable and lightweight ▪▪Long battery life ▪▪Variety of strengths available ▪▪Case and spare batteries included
Nauticalia The Stowaway Folding Buckets
N
Nauticalia Yachting Cap - England Expects
Nauticalia LED Illuminated Reading Glasses
NAT 5520 NAT 5521 NAT 5522 NAT 5523 NAT 5524 NAT 5525 NAT 5530 NAT 5531 NAT 5532 NAT 5533 NAT 5534 NAT 5535
These yachting caps incorporate a hard injectionmoulded shell for protection and foam padding for comfort and they meet the requirements of EU Standard Specifications EN812 (similar to building site bump caps).
231
232
Nauticalia Nauticalia Galileo Series Instruments ▪▪Distinctive ornamental (but functional) thermometers utilise 17th century astronomer Galileo Galilei's discovery that the density of liquids varies with temperature ▪▪Carefully weighted glass globes are suspended in a liquid-filled tube, where they sedately sink or float as the surrounding air gets hotter or colder
Nauticalia Stainless Steel Instruments This stainless steel case is completely corrosion resistant - suitable for in or outdoor use and excellent value. ▪▪Diameter 9", depth 1.5" ▪▪Keyhole mounting NAT 5172 Thermometer
Thermometer with Mirror
The clock incorporates smaller dials for humidity and temperature.
▪▪Temperature is indicated by the engraved brass tag on the lowest floating globe
NAT 5170 Clock NAT 5171 Barometer
NAT 6545 10" NAT 6544 14-1/2"
Galileo Thermometer with Clock
Nauticalia Inclinometer This brass-cased bubble inclinometer has three mounting holes for fixing to a bulkhead. ▪▪Diameter 4.5”
▪▪Temperature is indicated by the engraved brass tag on the lowest floating globe ▪▪This model is mounted in a wooden frame and includes a quartz clock (battery supplied)
NAT 5062
NAT 6547 18"
Giftware
W
E
N
Nauticalia Storm Bottle on Wooden Base
Aboard the HMS Beagle during the Darwin Expeditions of 1831-36, Captain Robert Fitzroy developed and refined the 18th century storm bottle. This involved much testing and observation and resulted in him being able to make a number of weather predictions with a fair(ish) degree of accuracy. The point is that then as now, no one is quite sure how the storm bottle works. Is it atmospheric pressure? Temperature? Electrical disturbances? And it’s this element of uncertainty, of almost magical alchemy, that makes these storm bottles so fascinating. Stands 16cm high on a traditional wooden base and comes with Fitzroy’s observations. Will you agree with them or find new interpretations? The mystery’s been going on for nearly 180 years. And looks set to continue. NAT 7031
NAT 7032
W
An essential instrument for any Captain, the Mutinometer reveals which of the crew may harbour mutinous tendencies! Gently hold the Mutinometer in the fist of your hand and watch the reaction of the liquid inside. ▪▪Size 15cm
E N
Nauticalia Mutinometer
Galileo Thermometer in Wall Frame ▪▪Temperature is indicated by the engraved brass tag on the lowest floating globe NAT 6548 11"
Galileo Thermometer Desk Stand ▪▪Temperature is indicated by the engraved brass tag on the lowest floating globe NAT 6549 8"
Galileo Barometer ▪▪This model includes a 'storm bottle' type indicator of changes in barometric pressure useful for forecasting the weather NAT 6546 13"
Nauticalia
233
Nauticalia Galileo Thermometers
Nauticalia Captain Campbell’s Vernier Sextant
Distinctive ornamental (but functional) thermometers utilise 17th century astronomer Galileo Galilei’s discovery that the density of liquids varies with temperature. Carefully weighted glass globes are suspended in a liquid-filled tube, where they sedately sink or float as the surrounding air gets hotter or colder. Temperature is indicated by the engraved brass tag on the lowest floating globe. ▪▪Temperature is shown in Celsius
A replica dedicated to Royal Navy Captain John Campbell, who developed the instrument in 1757. Crucially his invention appeared at about the same time as the first accurate, portable chronometers - and the combination of the two transformed navigation from guesswork to science, saving countless lives at sea. This importance gave rise to the air of mystique which surrounds the instrument and its use, even in today’s age of electronic wizardry. Detailing is impressive, with hardwood handle and protective box, six shades of varying intensity, and a powerful telescope. ▪▪Instrument measure 8” x 6.5”, box 10” square
NAT 7096 NAT 7094 NAT 7084 NAT 7085
13” Piccolo multi-coloured 24” Piccolo multi-coloured 13” Multi-coloured 17” Multi-coloured
Nauticalia Fob Compass Dry needle compass in a pocket watchstyle brass case, supplied in a polished hardwood box. ▪▪Compass dia 1.75", length of chain 18" ▪▪Box measures 3” x 3” x 1.5" NAT 4531
7084
7096
NAT 4562
Nauticalia Captain Campbell’s 1/4 Size Vernier Sextant This quarter-size version is an irresistible “musthave” for the desks of instrument collectors and nautical enthusiasts. ▪▪Sextant measures 4” x 4.5”, box 5” square NAT 4563
Nauticalia Desk-Top Box & Compass E
N
Made of chunky brass with a simple working dry compass encased in the centre. Can be engraved. ▪▪Diameter: 2”
W
NAT 7154
Polished mahogany-stained wooden box for housing the 7154 compass. Included is a goldplated brass plaque which can be engraved and attached to the hinged lid. NAT 7152
Nauticalia Chrome Pocket Compass
NAT 4547
W
NAT 4646
Nauticalia Gecko Dashboard Pads
E
▪▪Calling cards kept clean and crisp in these slim brass cases with distinctive features on the lids. ▪▪Each measure 2-1/4" x 3-1/2"
NAT 3151
N
Nauticalia Business Card Holders
These great-value digital weather stations make super impulse-buy lines, so are supplied as a mixed pack of 12 in a counter-top merchandiser. Packed with almost as many features as instruments several times the price, including: Time and Date, Weather Forecast, Indoor Temperature and Humidity, Alarm Clock. ▪▪Uses 2xAAA batteries (not included) ▪▪Display packs of 12
Inspired by the seemingly-miraculous way Geckos climb effortlessly on even smooth surfaces, these little patches of silicone adhere to dashboards and worktops etc to hold phones, satnavs, sunglasses and other small items in place. We don’t know how it works, but it does so amazingly well. It’s not sticky to the touch, doesn’t leave a residue, and is endlessly-repositionable. NAT 5580 Black NAT 5581 Grey NAT 5582 Red NAT 5583 Blue
Giftware
Lidded pocket compass with fluorescent markings. ▪▪1-3/4” diameter x 1/2” deep
Nauticalia Mini Weather Stations
234
Nauticalia
Believed by some to have been designed in 1804 by the legendary British inventor and polymath Joseph Crabtree, the functional simplicity of his brass-and-glass domed “Observatory” magnifier has never been surpassed or needed modification. Magnifies about 3x. Diameter: 2” Height: 1”
▪▪This dice shaker has brass inlaid dice and anchors and the dice spots are all individual brass dots ▪▪Measures 3"
This traditional chart weight has a swing-out magnifying glass and is as useful today as it was in the days of the great maritime explorers. 2.5” diameter. This product can be engraved. NAT 7175
▪▪The oversized wooden dice hinges open to reveal five regular size dice inside ▪▪Dice spots are brass inlaid ▪▪Height 3” NAT 4201
NAT 7160
W E
For quick viewing of distant objects which need more magnification than provided by standard binoculars, this low priced telescope is excellent value as well as having classic style. The four sections extend to 13" with 25 times magnification and 30mm diameter object lens. Tooled in spun brass, lacquered for lasting protection and bound in hand-stitched leatherette, with a zipped leatherette carrying case.
N
Nauticalia Wooden Dominos Set
Nauticalia Brass Pocket Telescope
▪▪A full set of dominoes in a smart wooden box with brass inlaid corners. The box has a glass panel set in the top ▪▪Length 8” NAT 4202
Nauticalia Cribbage Set The hinged lid and base fold out to create the scoring board, which is beautifully made from contrasting strips of light and dark wood. ▪▪Folded size 5x 3.5 x 2", opened 10"
Nauticalia Harbour Master Telescope ▪▪This is a small version telescope, to put on a desk or table ▪▪It has 12x magnification with a 33mm object lens, and the barrel is approximately 18" long fully extended. ▪▪Tripod adjusts from 15-24"
NAT 7203
W
E
N
Giftware
Nauticalia Wooden Dice Box with Dice
W E
Nauticalia Navigator’s Magnifying Glass
NAT 4200 N
NAT 7176
W E
Nauticalia Wooden Dice Shaker
N
Nauticalia Dr. Crabtree’s Patent Observatory Magnifier
NAT 7165
Nauticalia 8-Piece Boule Set Nauticalia Pencil Sharpeners NAT 7006* Skull NAT 7008* Aircraft Carrier NAT 7009* Battleship NAT 7040* Galleon
* Request Items
7006
7008
Jeu de Boules is the beloved national beach sport of the French, played for centuries by fishermen using suitably weighted and shaped rocks. The aim is to cast one's boules towards the wooden jack, knocking opponents' out of the way, with the winner being the person who ends up with the one closest. Our set consists of four full-size pairs, each with a distinct pattern (beware undersized, overpriced imitations). They are made in the classic way from chromeplated steel, weighing 22.5-oz (650g) each. Supplied in a tough nylon carrying bag. NAT 5694
Nauticalia Nauticalia Souvenir Bosun’s Call
Nauticalia Shipping Range Ship’s Bell
Less expensive version of the standard Navy issue. Cannot be tuned or piped clearly but looks authentic and whistles well. ▪▪Brass and cooper construction ▪▪43" chain
This larger 12” diameter bell is designed for oceangoing commercial ships and is certificated to meet international standards for sound-signalling at sea (in this case between 20 and 100 metres). It is supplied without brackets, because most vessels of this size have alternative arrangements.
NAT 2090
NAT 5106
Nauticalia Boxed Bosun’s Call
NAT 8149 Bracket
Parts:
In the days of sail, orders aboard ship were piped on the Bosun's Call, whose highpitched whistle could be heard against the strongest wind. 4" long, with matching 50" neck chain fitted with a swivel snaphook. They are supplied in a presentation box, with instruction leaflet and history. NAT 2111 NAT 2101
235
Brass & Copper Nickel plated
Nauticalia Coastal Range Ship’s Bells Ships' bells are manufactured in the finest tradition - sand-cast solid brass turned and polished to an immaculate sheen. NAT 5081 4" NAT 5082 5" NAT 5083 6"
Nauticalia Storm Lighter Originally made by soldiers in the trenches in World War I from spent bullet cases, seafarers adopted this practical brass petrol lighter. The sliding storm-guard shields the flame, even in a strong wind. When lowered it operates a snuffer extinguishing the flame and protecting the wick from spray. With positive flint control. ▪▪Overall length 3” NAT 4600
Nauticalia Lanyards Bell ropes are hand-tied in natural colour cotton with traditional knots, and make the essential finishing touch to a ships bell. NAT 5095 NAT 5096 NAT 5097
Small for 3-6” bells, 4-1/2” Medium for 5-7” bells, 8-1/2” Large for 7-12” bells, 11-1/2”
Nauticalia Wood Photo Frames ▪▪Natural wood photo frames in a string of three ▪▪Overall measurement 22" x 6" NAT 78435**
**Limited Quantities
Giftware
Nauticalia Pebble Paperweights NAT 74355** Crab NAT 74356** Starfish
** Limited Quatities
Please ask for a Nauticalia Catalogue for a full listing of products
236
Nauticalia N W E 6088
6089
Nauticalia Mugs Made from high quality porcelain NAT 6088 Compass, Blue NAT 6089 Compass, White NAT 6096 Captain NAT 6098 First Mate
Nauticalia Canvas Prints
Nauticalia Code Flag Mugs
Scenes printed on canvas and gallery wrapped onto a 3/4" frame. NAT 36138 NAT 36139 NAT 36141 NAT 36160
Coast Lighthouse, 40 x 50 cm Beach, 40 x 50 cm Boat on Beach, 40 x 50 cm Beach, 50 x 20 cm
Cream coloured on the inside and navy out, with the chosen design printed twice on the outside NAT 6471** Spliced NAT 6472** Wreck
Nauticalia Campfire-Style Mugs
**Limited Quantities
Giftware
W
E
N
Our new exclusive mugs are designed to look like the enamelled tin types you used to take camping, but are actually made from high quality porcelain - so they won't cool down so quickly, burn your hands, or leave that infamous taste! They are bright white with a contrasting dark blue rim and choice of nautical phrases/decoration. Dishwasher and microwave safe. ▪▪Height 3-1/2", diameter 3-1/2" ▪▪Individually boxed
Nauticalia Galleon Mugs
NAT 6066 Grumpy Old Man NAT 6067 I Am The Captain NAT 6068 Daily Flogging NAT 6069 Captains Word Is NAT 6070 Skipper NAT 6071 Captain NAT 6072 First Mate NAT 6073 Crew NAT 6075 Ancient Mariner NAT 6076 Reef Knot
▪▪270 ml ▪▪Good quality bone china mugs with strong designs of historic ships ▪▪Fully painted inside NAT 55607 Endeavour NAT 55608 Mayflower NAT 55609 Valiant NAT 55610 SS President NAT 55611 East Indiaman
E
N
W
E
W
N
Nauticalia Vintage Boathouse Mugs ▪▪270 ml ▪▪Bone china construction ▪▪Strong designs and fully painted inside NAT 55546 Anchor NAT 55547 Wheel NAT 55548 Propeller NAT 55549 Ship
Nauticalia Sailor Enamel Ware ▪▪Ceramic materials with a enamel-ware style NAT 55164 NAT 55165 NAT 55166 NAT 55167
Pot w/lid, 12 cm Pot w/lid, 16 cm Mug, 9 cm Tall Jug
Nauticalia
NAT 6102 NAT 6103
Red (4) Blue (4)
W E
Labelled according to rank, these sturdy plastic mugs come in sets of four, one each for the Captain, First Mate, Cabin Boy and Crew - and feature the Nauticalia ship-in-a-bottle logo. Can be used for hot and cold drinks and are dishwasher safe.
Nauticalia Porthole Flask
N
Nauticalia Coffee Mugs
237
The glass porthole let into this Sheffield pewter hip flask serves two purposes: so that the etching of HMS Victory inside the flask can be viewed; and (perhaps more important!) to check how much of the favoured tipple remains. ▪▪Fits easily in a jacket pocket ▪▪Diameter 3-3/4", height 4" ▪▪Capacity 140ml NAT 2196
NAT 78067 Red NAT 78068 Blue
Nauticalia Royal Navy Glasses Keep track of who’s who, and whose drink is whose, with these smart engraved glass tumblers – helps avoid confusion between daughter’s lemonade and Dad’s gin and tonic! The additional decoration is derived from the emblems used on the sleeves of Royal Naval uniforms. ▪▪Dishwasher safe, capacity 260ml each NAT 2185 Captain NAT 2186 Firstmate NAT 2187 Skipper NAT 2188 Crew
W E
▪▪Polyresin construction ▪▪450 ml
N
Nauticalia Lighthouse Mugs Nauticalia S/S Tankards Stainless steel tankards come labelled with crew positions so everyone knows whose drink is whose. ▪▪Capacity 500ml NAT 2202 Skipper NAT 2203 Captain NAT 2204 Ancient Mariner NAT 2205 Crew
Nauticalia Ship’s Wheel Coaster Set Six solid hardwood coasters (diameter 3.5”) supplied in a storage unit made by linking together two very smart looking miniature ship’s wheels. ▪▪Wheel diameter 5.5” NAT 4608
Samuel Plimsoll, MP, is remembered for his safe load waterline mark, introduced to prevent unscrupulous shipping owners from overloading their ships and so taking excessive risks with the lives of their crews. It is now found on all commercial ships worldwide. An attractive whisky glass, handsomely etched with his image and the Plimsoll line, in this case used to mark the “safe load” for a generous helping of spirit. Capacity to line is 160ml.
Nauticalia Blue and White Striped Round Coaster Sets ▪▪Sets of 4 coasters
NAT 74357**
** Limited Quatity
Large, 6"
NAT 2184
Nauticalia Naval Rum Measure
Nauticalia Mylne Yacht Design Tableware
The Royal Naval rum was measured in half-gill tots and variously diluted, often into a two-gill (half-pint) measure. These measures are made in the time-honoured way - from skillfully hand-beaten brass, copper-plated, polished, then lined with silver to neutralize taste. The bases are stamped with the prestigious HMS logo. Height: 2”
Alfred Mylne was one of the four great yacht designers of the early 20th Century, alongside G.L. Watson, William Fife III & Charles Nicholson. Mylne opened his own design office in Glasgow in 1896. His early racing successes secured his reputation, and he went on to design over 400 yachts until his retirement in 1945. Each of our tablemats and coasters feature one of six designs, showing hull profile, sail plans and rigging. ▪▪Felt-backed and heat-resistant to 100 degrees
NAT 4700 Each
NAT 4339 NAT 4340
Table mats, 30 x 22 cm, 6/pkg Coasters, 11 x 9 cm, 6/pkg
Giftware
Nauticalia Whisky Glass
238
Nauticalia
Nauticalia Non-Slip HD Roll Extra thick durable non-slip fabric, providing added protection against chipping or scratching. Ideal for the bottom of boat lockers and under gas bottles. NAT 3250
18" x 6' black
Nauticalia Apron - Boat Navy Stripes ▪▪Measures: 70 x 110 cm NAT 78414*
*Request Item
Nauticalia Non-Slip Place Mats ▪▪Set of six rectangular placemats ▪▪12” x 18” NAT 3240 White NAT 3241 Indigo NAT 3242 Electric blue NAT 3243 Almond NAT 3244 Forest green NAT 3245 Taupe NAT 3246 Black
Nauticalia Non-Slip Place Mats and Coasters Set
Giftware
Made from non-slip foam, which is melded onto a polyester mesh. The unique manufacturing process produces a hard wearing fabric which is not sticky or stretchy, but grips on both sides. It is durable, with an attractive open-weave structure that allows air to circulate. ▪▪Washable ▪▪Set of six rectangular placemats (12” x 18”), with six round coasters (4” diameter) NAT 3230 White NAT 3231 Indigo NAT 3232 Almond NAT 3233 Forest green NAT 3234 Electric blue NAT 3235 Taupe
Nauticalia Multi-Purpose Non-Slip Fabric Rolls These rolls of matting are simple to cut and sew. The fabric is made from non-slip foam, which is melded onto a polyester mesh. The unique manufacturing process produces a hard wearing fabric which is not sticky or stretchy, but grips on both sides. It is durable, with an attractive open-weave structure that allows air to circulate perfect for marine environments. ▪▪Washable NAT 3200 NAT 3201 NAT 3202 NAT 3203 NAT 3204 NAT 3205 NAT 3206 NAT 3210 NAT 3211 NAT 3212 NAT 3213 NAT 3214 NAT 3215 NAT 3216
12" x 6' Indigo 12" x 6' Taupe 12" x 6' Almond 12" x 6' Forest green 12" x 6' Black 12" x 6' Blue 12" x 6' White 20" x 6' White 20" x 6' Taupe 20" x 6' Almond 20" x 6' Forest green 20" x 6' Black 20" x 6' Elect blue 20" x 6' Indigo
NAT 3223
12" x 180' Almond
Nauticalia Galley Cloths Made exclusively for Nauticalia, our galley cloths feature a wide range of subjects. Some consider them too good for mundane chores and prefer to hang them on the wall in the galley or kitchen to bring some nautical cheer. The cloths are made of 100% cotton. ▪▪Each measures: W: 18” x H: 29" NAT 6127 Shipping Areas NAT 6131 Knots NAT 6132 Code Flags NAT 6138 Why Is A Ship... NAT 6140 Sailing NAT 6144 Shipping Areas 2 NAT 6146 Beware Pirates NAT 6145 World Map
Nauticalia
239
N E W
Nauticalia Sailboat Salt/Pepper & Tray Set ▪▪Polyresin construction ▪▪Navy/White ▪▪Height: 9 cm NAT 78022*
*Request Item
Nauticalia Square Coaster Sets ▪▪A fun range of nautical coasters with a choice of 12 designs each measuring 4" square ▪▪Wipe clean top with cork base NAT 3386 NAT 3387 NAT 3388 NAT 3389
NAT 3390 NAT 3391
NAT 3392 NAT 3393 NAT 3394 NAT 3395 NAT 3396 NAT 3397
Nauticalia Lighthouse Pepper Mills
Any Port in a Storm Good Yachtsmen Never Grow Old - They Just Keel Over Gusting Force 1 - No Ripples on the G&T The Devil May Wear Prada - but the Crew Will Wear Deck Shoes Nothing Works on a Old Boat - Except the Skipper Cheers - Somewhere in the World the Sun is Over the Yardarm Sailing - Galley Sailing - Navigation Sailing - Hull Speed Sailing - Pilotage Sailing - Ocean Racing Sailing - Bar
W
NAT 3267 Yellow NAT 3268 Green NAT 3269 Purple
E
▪▪For all your hot pans and pots ▪▪Naturally non-slip ▪▪22 cm folded ▪▪Sold by the each
N
Nauticalia Silicone Folding Trivet
▪▪Wood construction ▪▪15 cm ▪▪Two unique designs (subject to availability) ▪▪Sold by the each NAT 78385
Nauticalia Lighthouse Magnet Bottle Opener ▪▪Magnet bottle opener in the style of a lighthouse ▪▪Assorted styles ▪▪Sold by the each NAT 55741
Nauticalia Bottle Opener Solid brass bottle opener with raised anchor design and two mounting holes for secure attachment to a wall or bulkhead. An accessory that can be appreciated (and is useful) in a multitude of locations, and won’t get lost! NAT 4387
Nauticalia Anchor Bottle Opener with Corkscrew
A dish rack would be so handy on board, but where to stow it? Easy with this one because it folds up into itself, measuring just 12” x 8” x 2”. Room for 13 plates or bowls, with side areas for cutlery and glasses. An integral drip tray keeps worktops dry.
Bottle cap remover and corkscrew in one. The flukes of the anchor give a good purchase on stubborn corks. Chunky polished brass castings with stainless steel "worm" (corkscrew thread). ▪▪Length 5"
NAT 3440
Nauticalia Lighthouse Shakers Turned from solid brass, these lighthouse salt and pepper shakers are chrome-plated top and bottom for contrast, and on the inside for taste neutrality. ▪▪Height: 4” NAT 4341
NAT 4392
Nauticalia Bottle Openers Solid brass bottle openers. ▪▪Wheel opener, length 5.5”. ▪▪Anchor opener, length overall 5.5” NAT 4382 Wheel NAT 4386 Anchor
Giftware
Nauticalia Folding Dish Rack
240
Nauticalia
▪▪Coastal theme ▪▪Set of 12 wooden clips ▪▪5 cm
▪▪Metal sails ▪▪Assorted colours ▪▪12cm
NAT 78457
NAT 55442
N W E
Nauticalia Wood Model Yachts
W E
W E
Nauticalia Wood Model Yachts
N
N
Nauticalia Paper Clip Set
N W E
▪▪Metal sails ▪▪Assorted colours ▪▪21cm NAT 55443
4820 Nauticalia Wooden Peg Clip Sets
4821
▪▪Multi-use ▪▪Wood construction ▪▪Sets of six NAT 4820 Sailing, red/blue NAT 4821 Sealife NAT 4822 Sailing/globe, blue
Nauticalia Ornamental Aluminium Yachts Boldly sculptured in polished aluminium, these countersterned, sloop-rigged yachts make stunning ornaments. The subtle curves of their sails pick up light and reflections from surrounding objects to make constantly changing patterns.
4822
7405
Small, L: 8" x 10-1/2" Large, L: 13" x H: 15-1/2"
7401
7403
Nauticalia Miniature Wooden Boats Miniature wooden boats are delightfully intricate, (Not a bath toy). NAT 7401 NAT 7402 NAT 7403 NAT 7404 NAT 7405
Sailing Barge Fishing Boat, 3-1/2” long Fish Trawler, 6” Bermudian Ketch, 6” Sloop, 5” long
W
7401
Chunky all-wood model yachts in the style of the great J-class racing yachts 1930s, with cotton sails. ▪▪Requires little self-assembly ▪▪Measures: length 10", height 14"
E
Nauticalia America's Cup Models
N
Giftware
7404
NAT 5290 NAT 5293
of the
NAT 6900 Blue NAT 6901 Cream
Nauticalia Pirate Flags Made from lightweight 100% polyester and printed right through. The edge is protected by a stiff white braid, with two brass eyelets for halyard attachments. NAT 6218 NAT 6215
Medium, 39” x 22” Small, 18” x 9”
Nauticalia
241
Nauticalia Repeating Parrot LONG JOHN SILVER'S REPEATING, REPEATING PARROT - straight out of Treasure Island, but this one says whatever you just said twice. Whatever you just said twice. Whatever you just said twice. And flaps its wings while doing so. Immensely enjoyable irritating fun. ▪▪Takes four AA batteries (not included)
Nauticalia Glass Fishing Net Floats
NAT 92091
Encased in netted rope, these hollow floating coloured glass spheres were used to support fishermen's nets and to mark lobster pots for retrieval from the seabed. Today they are commonly used as interesting decor. ▪▪Each is hand-blown to create an authentic bullseye at the cut-off point - no two are identical (hence measurements are approximate). NAT 2221 NAT 2223 NAT 2225
W
E
W
NAT 55274 NAT 55277
Nauticalia Glass Bottles with String
N
E
N
Nauticalia Cushions
Triple float, 30cm Green float, 10cm Double, 36cm
Encased in netted string, these coloured glass bottles are commonly used as an interesting decor. ▪▪10 cm ▪▪Assorted colours ▪▪Sold by the each
Lifering Welcome Aboard, 30 cm Sailboat, 40 cm
NAT 6585
Nauticalia Hurricane Lamp E
N
NAT 55467 NAT 55468
W
Nauticalia Cushions with Handles Beach, 57 cm Coast, 57 cm
▪▪33 x 60 cm NAT 78421*
NAT 4119
*Request Item
Blue Enamel Tin Plate Hurricane Lamp
E
N W
Nauticalia Antique Life Rings ▪▪30 cm NAT 55513 Blue NAT 55514 Red
▪▪All the features as above but manufactured for shore use with a enamel coated tin NAT 4118
Giftware
Nauticalia Lighthouse Cushion
The hurricane lamp has long been popular with seafarers, for its robust construction, steady flame and excellent safety features. They make excellent camping lights, providing welcome security and comfort on the darkest of nights. Until recently however, there was a problem - the tin plate construction was prone to rapid corrosion in the salty marine environment. To counteract this, we have produced a solid brass version, making it suitable for use above and below decks. ▪▪Height including handle 10”
242
Nauticalia N
Nauticalia Key Ring
W E
▪▪Polyresin construction ▪▪Puffins in variable designs ▪▪Sold by the each NAT 45206
Nauticalia Enameled Key Rings ▪▪Chromed steel & polyresin construction NAT 4612 Nautical Charms NAT 4613 Parrot Charms NAT 4614 Fish Charms NAT 4615 Dolphins NAT 4656 Yacht -Red,White & Blue NAT 4657 Blue Wheel NAT 4658 Purple Anchor NAT 55182 Captain Cap
Nauticalia Key Rings ▪▪Chromed steel & polyresin construction ▪▪Variable colours ▪▪Sold by the each
N
NAT 58537 Starfish, 5 cm NAT 55562 Seahorse NAT 58559** Dolphin, 7 cm
W
E
**Limited Quantity
Nauticalia Chrome Key Rings
Nauticalia Key Rings
NAT 4659 Anchor with Gemstone NAT 4665 Wheel NAT 4668 Bottle opener - Fish Bone NAT 4669 Bottle opener - Lobster
▪▪Wood construction ▪▪Variable colours ▪▪Sold by the each
W
E
Nauticalia Wooden Key Rings
W
E
NAT 4616 Dolphin NAT 4619 Fish NAT 4634 Seahorse NAT 4805 Orca NAT 4806 Penguin NAT 4807 Lifering NAT 4808 Sailboat NAT 4812 Lighthse NAT 4814 Motorboat
N
Giftware
Beach hut, 4.5 cm Lighthouse, 6 cm
N
NAT 13638 NAT 13639
Nauticalia Chrome Key Rings with Lanyard 4619
4634
NAT 4650 Bell NAT 4651 Propeller NAT 4653 Dolphin NAT 4654 Anchor NAT 4655 Wheel
Nauticalia Floating Cork Key Rings ▪▪Cork Floating key ring supports 3 keys ▪▪Champagne Cork supports 6 keys NAT 4453 Round NAT 4477 Champagne
Nauticalia Nauticalia Brass Key Rings
Nauticalia Brass Key Rack
NAT 4444 Wheel/Compass NAT 4448 Ship’s Wheel NAT 4450 Ship’s Bell (rings) NAT 4451 Stockless Anchor NAT 4454 Whistle (shrill) NAT 4456 Telegraph NAT 4457 50yr Calendar NAT 4459 Mini Bosun’s Call NAT 4473 Propeller NAT 4475 Working Compass (liquid filled) NAT 4521 Sea Horse NAT 4523 50-year Calender NAT 4524 Anchor NAT 4525 Police Whistle NAT 4526 Monkey Fist Knot NAT 4529 Compass NAT 4530 Shark Bottle Opener NAT 4535 Lifebelt NAT 4539 World Globe NAT 4555 Anchor Lamp NAT 4556 Diving Helmet NAT 4584 Telescope (magnifies 3x) NAT 4832 Miners Lamp LED (lights up) NAT 5354 Cannon NAT 7307 Monkey Fist Knot
▪▪Ship’s Wheel - six hooks, 7” diameter ▪▪Single screw-hole for wall mounting.
Nauticalia Swivelling Coat Hook Hooks that fold away are invaluable where space is precious. These all-brass hooks are sturdy with independently swivelling arms. NAT 4287
3-Way, 3” x 4”
Nauticalia Single Anchor Coat Hooks ▪▪Polished, lacquered solid brass ▪▪H: 3-3/4" x L: 21/4" NAT 4285 NAT 4286
Single, W: 2.25" x H: 3.75 Triple, W: 8.25" x H: 4.75"
E W
▪▪Hidden safe
NAT 4283
N
Nauticalia Cork Key Ring
243
NAT 4819
▪▪Polyresin construction ▪▪6 cm NAT 58536 4/pkg
Nauticalia Lighthouse Magnets Two half magnets back-to-back make a free-standing whole. Alternatively, each lighthouse makes two fridge magnets. ▪▪3" high NAT 7478
Giftware
Nauticalia Starfish Magnets
W
NAT 58159 4/pkg
E
▪▪Polyresin construction ▪▪10 cm
N
Nauticalia Mermaid Magnets
244
Nauticalia
Nautical Greeting Cards ▪▪All cards are blank inside ▪▪Envelope included
Dressed All Over Greeting Cards
Pirate Talk Greeting Cards NAT 3360** Pirate party planner NAT 3361** If ye thinks ye be ready to Sail a beauty ye better be
NAT 3366 NAT 3367 NAT 3368 NAT 3369 NAT 3370 NAT 3371
Birthday Ahoy Birthday Buoy Old Buoys Fair Winds Jumble Sails Vintage Sails
willin' to sink with'er!
NAT 3362** Birthday buoy! Its a pirates life for yer!
** Limited Quantities
Fishy Tales Greeting Cards NAT 3350 A great fisherman lives here..with the catch of his life NAT 3351 A reel expert can tackle anything NAT 3352** To fish, fine and far off, is the first and principle rule
Sailing Greeting Cards
Giftware
▪▪15 x 15 cm greeting cards ▪▪Sold by the each
NAT 3330 Galley NAT 3331 Navigation NAT 3332 Spinnaker NAT 3333 Flotsam NAT 3334 Hull Speed NAT 3335 Pilotage NAT 3336 Ocean Racing NAT 3337 Bar NAT 3338 Regatta NAT 3339 Current NAT 3399 Happy Birthday - That's My Bouy NAT 3400 Size Matters - Coleg: No.1 NAT 3401 Sailing is just like sex, when it's good it's really good...
for trout angling Give a man a fish and he has food for a day. Teach a man to fish and has to buy... NAT 3356** Out now...Anglers Almanac..the beat times to go fishing NAT 3357 Fishing rules NAT 3358 Good fishermen never grow old..They just smell that way NAT 3359 A woman who has never seen her husband fishing doesn't know how patient a man she has married
NAT 3353
** Limited Quantities
when it's bad, it's still kind of good
NAT 3405 Happiness...Destination NAT 3406 Don't Follow your dreams...Chase Them NAT 3407 Explore, Dream, Discover NAT 3408 Paradise is not a Place - it's a State of Mind
Nautical Greeting Cards NAT 3378 NAT 3380
NAT 3381
Green light to starboard - Cold beers aboard Fish Come In Three Sizes - Large, Huge and the One That Got Away Good fishermen never grow old - the just forget how to use their Tackle
Please ask for a Nauticalia Catalogue for a full listing of products
Nauticalia / L’il Sucker
245
SandScript Greeting Cards ▪▪15 x 15 cm greeting cards ▪▪Sold by the each
Salty Saying Greeting Cards
NAT 2632 Happy Birthday (Present) NAT 2633 With Love (Heart) NAT 2634 Happy Birthday (Pebble) NAT 2635 Pebble Heart NAT 2636 Happy Birthday NAT 2637 Just To Say NAT 2638 With Love NAT 2639 Thank You NAT 2640 Happy Annivrsary NAT 2641 Just To Say NAT 2642 Now Home NAT 2643 Life's A Beach NAT 2644 Congratulations NAT 2645 You're A Star NAT 2646 Good Luck NAT 2647 Love U NAT 2648 Thank You NAT 2649 Your Retirement NAT 2650 Get Well NAT 2655 Happy Birthday Seashore
NAT 3340 NAT 3341 NAT 3342 NAT 3343 NAT 3344 NAT 3345
NAT 3346 NAT 3347 NAT 3348 NAT 3349
NAT 3374 NAT 3375 NAT 3376 NAT 3379 NAT 3402
Any port in a storm Good sailors never grow old..They just get a little dinghy Good yachtsmen never grow old..They just keel over Gusting force 1..No ripples on the G&T The devil may wear Prada..But the crew wear deck shoes Give a man a fish & he will eat for a day..Teach a man to fish & he will sit in a boat all day & drink BEER There are the haves..& the have yachts Home is where the boat is Nothing work on an old boat except the skipper Cheers! Somewhere in the world the sun is over the yardarm Fair Winds & Following Seas Happy Birthday - Ancient Mariner Happy Birthday - Armchair Sailor Allways Remenber - Leave Your Red Wine to Port Shi****P Happens
SandScript Audio Greeting Cards ▪▪Cards play sounds of the sea when opened ▪▪15 x 15 cm greeting cards ▪▪Sold by the each NAT 2651 NAT 2652 NAT 2653 NAT 2654
Happy Birthday (Present) Happy Birthday Seashore With Love (Heart) Just To Say
W
E
N
L’il Sucker Snap Capp ▪▪Snap-on, pop-off drink protection that is reusable & dishwasher safe ▪▪Fewer spills and no more flat drinks ▪▪Fits most drink cans ▪▪Counter display pack of 24 LIS SNAP CAP
Giftware
L’il Sucker
Rigging Hardware
247
AEROFAST
248
ARCO
249
BLUE WAVE
251
COTTER PINS
248
JOHNSON
267
LOOS
275
STA-LOK
276
RIGGING WIRE
278
248
Aerofast / Cotter Pins
Aerofast Fast Pins
Aerofast Fast Pins Cont.
Standard detent pin manufactured in a centerless ground 303 stainless steel. ▪▪Sold by the each, bulk or packaged (P)
AER C6-10R-303 AER C6-10R-303-P
1” 1”
AER C6-15R-303
1”
1”
AER C6-15R-303-P
3/8” x 1-1/2”
1”
1”
AER C6-20R-303
3/8” x 2”
1”
3/16” x 3/4”
1”
AER C6-20R-303-P
3/8” x 2”
1”
3/16” x 3/4”
1”
AER C6-25R-303
3/8” x 2-1/2”
1”
3/16” x 1”
1”
AER C6-25R-303-P
3/8” x 2-1/2”
1”
AER C3-05R-303
3/16” x 1/2”
AER C3-05R-303-P
3/16” x 1/2”
AER C3-08R-303 AER C3-08R-303-P AER C3-10R-303-P
Ring
3/8” x 1” 3/8” x 1”
Ring
AER C3-10R-303
Dimensions AxB
3/8” x 1-1/2”
Dimensions AxB
Part #
3/16” x 1”
1”
AER C6-30R-303
3/8” x 3”
1”
AER C3-13R-303
3/16” x 1-1/4”
1”
AER C6-30R-303-P
3/8” x 3”
1”
AER C3-13R-303-P
3/16” x 1-1/4”
1”
AER C6-50R-303
3/8” x 5”
1”
AER C3-15R-303
3/16” x 1-1/2”
1”
AER C6-50R-303-P
3/8” x 5”
1”
AER C3-15R-303-P
3/16” x 1-1/2”
1”
AER C8-13R-303
1/2” x 1-1/4”
1-1/4”
3/16” x 2”
1”
AER C8-13R-303-P
1/2” x 1-1/4”
1-1/4”
AER C3-20R-303 AER C3-20R-303-P
Rigging Hardware
Part #
3/16” x 2”
1”
AER C8-15R-303
1/2” x 1-1/2”
1-1/4”
AER C3-25R-303
3/16” x 2-1/2”
1”
AER C8-15R-303-P
1/2” x 1-1/2”
1-1/4”
AER C3-25R-303-P
3/16” x 2-1/2”
1”
AER C8-20R-303
1/2” x 2”
1-1/4”
AER C3-30R-303
3/16” x 3”
1”
AER C8-20R-303-P
1/2” x 2”
1-1/4”
AER C3-30R-303-P
3/16” x 3”
1”
AER C8-30R-303
1/2” x 3”
1-1/4”
AER C4-05R-303
1/4” x 1/2”
1”
AER C8-30R-303-P
1/2” x 3”
1-1/4”
AER C4-05R-303-P
1/4” x 1/2”
1”
AER C8-40R-303
1/2” x 4”
1-1/4”
AER C4-08R-303
1/4” x 3/4”
1”
AER C8-40R-303-P
1/2” x 4”
1-1/4”
AER C4-08R-303-P
1/4” x 3/4”
1”
AER C4-10R-303
1/4” x 1”
1”
AER C4-10R-303-P
Aerofast Hitch Pins
1/4” x 1”
1”
AER C4-13R-303
1/4” x 1-1/4”
1”
▪▪316 stainless steel construction ▪▪Sold by the each, bulk or packaged (P)
AER C4-13R-303-P
1/4” x 1-1/4”
1”
AER C4-15R-303
1/4” x 1-1/2”
1”
AER HC-2SS
AER C4-15R-303-P
1/4” x 1-1/2”
1”
AER HC-2SS-P
3/8”
AER C4-18R-303
1/4” x 1-3/4”
1”
AER HC-3SS
1/2”
AER C4-18R-303-P
1/4” x 1-3/4”
1”
AER HC-3SS-P
1/2”
1/4” x 2”
1”
AER HC-4SS
3/4” 3/4”
AER C4-20R-303 AER C4-20R-303-P
Part #
Jaw Size
3/8”
1/4” x 2”
1”
AER HC-4SS-P
AER C4-25R-303
1/4” x 2-1/2”
1”
AER HC-5SS
1”
AER C4-25R-303-P
1/4” x 2-1/2”
1”
AER HC-5SS-P
1”
1/4” x 3”
1”
AER C4-30R-303 AER C4-30R-303-P
1/4” x 3”
1”
AER C5-10R-303
5/16” x 1”
1”
AER C5-10R-303-P
5/16” x 1”
1”
AER C5-15R-303
5/16” x 1-1/2”
1”
AER C5-15R-303-P
5/16” x 1-1/2”
1”
AER C5-20R-303
5/16” x 2”
1”
AER C5-20R-303-P
5/16” x 2”
1”
AER C5-25R-303
5/16” x 2-1/2”
1”
AER C5-25R-303-P
5/16” x 2-1/2”
1”
AER C5-30R-303
5/16” x 3”
1”
AER C5-30R-303-P
5/16” x 3”
1”
Cotter Pins 316 stainless steel cotter pins. FIP SP-116-12 FIP SP-332-58 FIP SP-332-34 FIP SP-332-1 FIP SP-332-114 FIP SP-332-112 FIP SP-18-34 FIP SP-18-1 FIP SP-18-114 FIP SP-18-112 FIP SP-18-2
1/16” x 1/2” 3/32” x 5/8” 3/32” x 3/4” 3/32” x 1” 3/32” x 1-1/4” 3/32” x 1-1/2” 1/8” x 3/4” 1/8” x 1” 1/8” x 1-1/4” 1/8” x 1-1/2” 1/8” x 2”
FIP SP-532-1 FIP SP-532-114 FIP SP-532-112 FIP SP-316-34 FIP SP-316-1 FIP SP-316-114 FIP SP-316-112 FIP SP-316-2 FIP SP-316-214
5/32” x 1” 5/32” x 1-1/4” 5/32” x 1-1/2” 3/16” x 3/4” 3/16” x 1” 3/16” x 1-1/4” 3/16” x 1-1/2” 3/16” x 2” 3/16” x 2-1/4”
249
ARCO ARCO Aircraft Forks
ARCO Aircraft Eyes
316 stainless steel construction.
316 stainless steel construction.
Part #
Wire
Hole
ALE AE-3
3/32”
3/16”
1/8”
ALE AE-4
1/8”
3/16”
3/16”
7/32”
ALE AE-5
5/32”
1/4”
3/16”
3/16”
5/16”
1/4”
Wire
Hole
ALE AF-3
3/32”
3/16”
1/8”
ALE AF-4
1/8”
3/16”
3/16”
ALE AF-5
5/32”
1/4”
Part #
Fork
Head Width
ALE AF-6
3/16”
5/16”
1/4”
ALE AE-6
ALE AF-7
7/32”
5/16”
5/16”
ALE AE-7
7/32”
5/16”
9/32”
1/4”
3/8”
5/16”
ALE AF-8
1/4”
3/8”
5/16”
ALE AE-8
ALE AF-9
9/32”
7/16”
11/32”
ALE AE-9
9/32”
7/16”
11/32”
5/16”
7/16”
11/32”
3/8”
1/2”
3/8”
ALE AF-10
5/16”
7/16”
11/32”
ALE AE-10
ALE AF-12
3/8”
1/2”
3/8”
ALE AE-12
ARCO Clevis Pins
ARCO Marine Eyes
316 stainless steel construction.
316 stainless steel construction.
Diameter
Working Length
For Series
ALE CPAF-3
3/16”
9/32”
AF-3
ALE CPAF-4
3/16”
13/32”
AF-4
ALE CPAF-5
1/4”
7/16”
AF-5
ALE CPAF-6
5/16”
9/16”
AF-6
ALE CPAF-7
5/16”
21/32”
AF-7
ALE CPAF-8
3/8”
23/32”
AF-8
ALE CPAF-9
7/16”
3/4”
AF-9
ALE CPAF-10
7/16”
25/32”
AF-10
ALE CPAF-12
1/2”
27/32”
AF-12
ALE CPAF-16
5/8”
1-1/16”
AF-16
ALE CPFT-24
3/4”
1-9/16”
-
Part # Part #
Wire
Head Width
Hole
ALE ME-3
3/32”
1/8”
1/4”
ALE ME-4
1/8”
3/16”
1/4”
ALE ME-5
5/32”
15/65”
5/16”
ALE ME-6
3/16”
5/16”
3/8”
ALE ME-7
7/32”
3/8”
7/16”
ALE ME-7-3/8
7/32”
3/8”
3/8”
ALE ME-8
1/4”
3/8”
1/2”
ALE ME-8-7/16
1/4”
3/8”
7/16”
ALE ME-9
9/32”
1/2”
1/2”
ALE ME-10
5/16“
1/2”
1/2”
ALE ME-10S
5/16”
9/16”
5/8”
ALE ME-12
3/8”
5/8”
5/8”
ARCO T-Terminal with Eyes ALE TRB-4 1/8” ALE TRB-6 3/16” ALE TRB-8 1/4” ALE TRB-10 5/16”
ARCO Threaded Eyes 316 stainless steel construction.
Thread Size
Hole
ALE TE10LH
5/16” LH
ALE TE12LH
3/8” LH
ALE TE16LH
1/2” LH
Part #
Thread Length
TPI
ARCO Swage Studs
5/16”
2-1/4”
24
316 stainless steel construction.
3/8”
2-19/32”
24
1/2”
2-31/32”
20
ALE SS7-3/8 ALE SS7-7/16 ALE SS8-7/16
7/32” wire x 3/8”-24 RH threaded 7/32” wire x 7/16”-20 RH threaded 1/4” wire x 7/16”-20 RH threaded
ARCO Sailmaker Eyes 316 stainless steel construction. ALE SE-6-E ALE SE-8-E
3/16" Wire, 1/4” Pin 1/4” Wire 1/2” Pin
Rigging Hardware
316 stainless steel construction.
251
Blue Wave - Rigging
Blue Wave Quick Rig Tune Turnbuckles - QRT The QRT is Blue Waves top racing rigging screw. Developed specifically for the hardcore racing crew. ▪▪For racing dinghies and small keelboats ▪▪Laser engraved calibration scale for precise adjustment ▪▪Handle for one end quick adjustment and easy locking ▪▪AISI 316 stainless steel body and terminal with chromed bronze nut ▪▪Toggle fork for 1/8” - 9/32” wire Part # Right
Wire
Teminal
G
Pin
A
B
Min-Max
L1
L2
Break Load
Eye
1/4”
6.35
8
16
139 - 179
56
169
1,300 kg
BLU QRT19014 BLU QRT32014
3.0
Wire
1/4”
6.35
8
16
172 - 212
52
169
1,300 kg
BLU QRT04516
Ø4-5/32”
Wire
5/16”
8
10
20
201 - 251
60
201
2,350 kg
BLU QRT05516
Ø5-3/16”
Wire
5/16”
8
10
20
208 - 258
60
201
2,350 kg
Blue Wave Smart Pins The smart pins are a fast and revolutionary new way of securing open body rigging screws. Simply put the pin attached to the Velcro strap into the split pin hole and secure the Velcro strap around the rigging screw. ▪▪316 S/S construction ▪▪4/pkg For Turnbuckles
L(mm)
B(mm)
H(mm)
Pin(mm)
1/4”
150
16
8
2.0
BLU VP1225P4
5/16” & 3/8”
190
16
10
2.5
BLU VP1632P4
7/16” & 1/2”
260
20
13
3.2
BLU VP2340P4
5/8” & 3/4”
370
25
20
4.0
BLU BWLUB1
50 gram tube
W
▪▪Blue Wave lubricant contains PTFE micro powder, dispersed in a synthetic base oil with anti-oxidation additives ▪▪A highly effective lubricant, with long life properties, for use in metal to metal applications ▪▪Water repellent, will not soil and performs in temperatures between - 40°C and +100°C ▪▪Non ageing and has exrtemely low friction
E N
Blue Wave Lubricant
Rigging Hardware
Part #
BLU VP1020P4
252
Blue Wave - Rigging
Blue Wave Turnbuckles - Fork/Fork Highly polished AISI 316 stainless steel construction. Part #
M
L1
L2
L4
L5
A
Break Load
BLU 120005
M5
180
126
9.4
80
7.8
800 kg
BLU 120006
M6
200
138
9.4
92
7.5
1,250 kg
BLU 120008
M8
234
158
10.4
112
6.0
1,300 kg
Part #
G UNF
L1
L2
L4
L5
A
Break Load
BLU 120006A
1/4”
9-1/8”
5-1/2”
33/64”
3-5/8”
3/8”
2,850 lbs
BLU 120008A
5/16”
9-1/2”
5-5/8”
19/32”
4-13/32”
7/16”
5,150 lbs
BLU 120010A
3/8”
11”
7-11/16”
3/4”
4-23/64”
15/32”
7,700 lbs
BLU 120011A
7/16”
12-7/32”
8-5/8”
7/8”
5-63/64”
15/32”
10,300 lbs
BLU 120012A
1/2”
13-25/32”
9-19/32”
63/64”
5-63/64”
9/16”
11,850 lbs
Blue Wave Turnbuckles - Fork/Terminal Highly polished AISI 316 stainless steel construction. Part #
G UNF
Wire
L1
L2
L4
L5
A
Pin Size
Break Load 2,850 lbs
BLU 120306A
1/4”
1/8”
9-5/32”
6-11/16”
33/64”
3-5/8”
3/8”
1/4”
BLU 120408A
5/16”
5/32”
10-13/16”
7-27/32”
19/64”
4-13/32”
7/16”
5/16”
5,150 lbs
BLU 120508A
5/16”
3/16”
11-1/4”
8-1/4”
19/64”
4-13/32”
7/16”
5/16”
5,150 lbs
BLU 120510A
3/8”
3/16”
12-1/4”
8-15/16”
3/4”
4-33/32”
15/32”
3/8”
7,700 lbs
BLU 126310A
3/8”
1/4”
12-1/4”
8-15/16”
3/4”
5-63/64”
15/32”
3/8”
7,700 lbs
Blue Wave Turnbuckles - Toggle/Terminal
Rigging Hardware
Highly polished AISI 316 stainless steel construction. Part #
G UNF
Wire
L1
L2
L4
L5
A
Pin
Break Load
BLU 320306A
1/4”
1/8”
9-31/32”
7-17/32”
43/64”
3-5/8”
5/16”
1/4”
2,850 lbs
BLU 320406A
1/4”
5/32”
10-3/8”
7-29/32”
43/64”
3-5/8”
5/16”
1/4”
2,850 lbs
BLU 320408A
5/16”
5/32”
11-31/32”
8-31/32”
25/32”
4-13/32”
25/64”
5/16”
5,150 lbs
BLU 320508A
5/16”
3/16”
12-7/32”
9-7/32”
25/32”
4-13/32”
25/64”
5/16”
5,150 lbs
BLU 320510A
3/8”
3/16”
13-24/32”
10-11/32”
1-1/32”
4-23/32”
15/32”
3/8”
7,700 lbs
Blue Wave Turnbuckles - Toggle/Terminal Highly polished AISI 316 stainless steel construction with a chromed bronze body. Part #
G UNF
Wire
L1
L2
L4
L5
A
Pin
Break Load
BLU 330306A
1/4”
1/8”
10-1/32”
7-19/32”
43/64”
3-15/16”
5/16”
1/4”
2,850 lbs
BLU 330408A
5/16”
5/32”
11-31/32”
8-31/32”
25/32”
4-27/32”
25/64”
5/16”
5,150 lbs
BLU 330510A
3/8”
3/16”
13-47/64”
10-7/16”
1-1/32”
5-5/16”
15/32”
3/8”
7,700 lbs
BLU 335510A
3/8”
7/32”
14-1/16”
10-3/4”
1-1/32”
5-5/16”
15/32”
3/8”
7,700 lbs
BLU 336310A
1/2”
1/4”
16”
12”
1-3/8”
6-11/16”
1-12”
1/2”
7,700 lbs
BLU 336312AX
1/2”
1/4”
16-47/64”
12-9/16”
1-3/8”
6-11/32”
23/32”
1/2”
11,850 lbs
BLU 330812AX
1/2”
5/16”
17-41/64”
13-15/32”
1-3/8”
6-11/16”
23/32”
1/2”
11,850 lbs
BLU 339520AX
3/4”
3/8”
24-5/8”
18-5/16”
1-21/32”
9-27/32”
15/16”
3/4”
28,600 lbs
Blue Wave - Rigging
253
Blue Wave Open Body Toggle/Blank Turnbuckles Highly polished AISI 316 stainless steel construction with a chromed bronze body. G UNF
L1
L2
A
G
BLU 330006AS
Part #
1/4”
6-13/16”
5-9/16”
5/16”
1/4”
Break Load 2,850 lbs
BLU 330008AS
5/16”
8-5/32”
6-39/64”
25/64”
5/16”
5,150 lbs
BLU 330010AS
3/8”
9-13/32”
7-13/16”
15/32”
3/8”
7,700 lbs
BLU 330011AXS
7/16”
10-9/16”
8-13/16”
19/32”
7/16”
10,300 lbs
BLU 330012AXS
1/2”
11-11/16”
9-17/32”
23/32”
1/2”
11,850 lbs
BLU 330016AXS
5/8”
14-7/8”
12-5/32”
25/32”
5/8”
17,600 lbs
BLU 330020AXS
3/4”
19”
14-1/2”
15/16”
3/4”
28,600 lbs
See page xxx for matching Swage Studs
Blue Wave Turnbuckles - Toggle/Fork Highly polished AISI 316 stainless steel construction.
Part #
G UNF
L1
L2
B1
B2
A1
A2
Pin
Break Load
BLU 320006A
1/4”
8-23/32”
6-3/16”
33/64”
43/64”
5/16”
3/8”
1/4”
2,850 lbs
BLU 320008A
5/16”
10-9/16”
7-9/16”
19/32”
25/32”
25/64”
7/16”
5/16”
5,150 lbs
BLU 320010A
3/8”
12-1/4”
8-15/16”
3/4”
1-1/32”
15/32”
15/32”
3/8”
7,700 lbs
Blue Wave Swage Toggles Highly polished AISI 316 stainless steel construction. Part #
D Pin
L1
L2
L4
A
B
Break Load
1/8”
1/4”
3-5/64”
1-1/2”
1/2”
43/64”
5/8”
2,850 lbs
BLU 500804
5/32”
5/16”
3-45/64”
1-49/64”
5/8”
25/32”
3/4”
2,850 lbs
BLU 509505
3/16”
3/8”
4-7/16”
2”
3/4”
1-1/32”
63/64”
7,700 lbs
BLU 509555
7/32”
3/8”
4-7/8”
2-5/16”
3/4”
1-1/32”
15/16”
7,700 lbs
BLU 501163X
1/4”
7/16”
5-45/64”
2-17/32”
57/64”
1-9/64”
63/64”
10,300 lbs
BLU 501263X
1/4”
1/2”
5-15/16”
2-17/32”
31/32”
1-3/8”
1-7/32”
13,600 lbs
BLU 501207X
9/32”
1/2”
6-3/16”
2-3/4”
31/32”
1-3/8”
1-7/32”
13,600 lbs
BLU 501608X
5/16”
5/8”
7-13/16”
3-17/64”
1-9/64”
1-21/32”
1-7/16”
21,500 lbs
BLU 501695
3/8”
5/8”
8-31/32”
3-15/16”
1-9/64”
1-21/32”
3/4”
28,600 lbs
BLU 501995X
3/8”
3/4”
8-31/32”
3-15/16”
1-13/64”
1-11/16”
1-21/32”
28,600 lbs
Rigging Hardware
Wire
BLU 500603
254
Blue Wave - Rigging
Blue Wave Fixed Fork Terminals - Welded Highly polished AISI 316 stainless steel construction. Part #
Wire
D1
L1
L3
L4
A
Break Load
BLU 100525
3/32”
7/32”
2-9/32”
1-17/64”
15/32”
19/64”
1,760 lbs
BLU 100503
1/8”
13/64”
2-9/16”
1-1/2”
15/32”
19/64”
1,760 lbs
BLU 100603
1/8”
15/64”
2-19/32”
1-1/2”
33/64”
3/8”
2,750 lbs
BLU 100504
5/32”
13/64”
2-13/16”
1-25/32”
15/32”
19/64”
1,760 lbs
BLU 100604
5/32”
15/64”
2-7/8”
1-25/32”
33/64”
3/8”
2,750 lbs
BLU 100804
5/32”
5/16”
3-1/32”
1-25/32”
19/32”
7/16”
5,150 lbs
BLU 100605
3/16”
1/4”
3-1/8”
1-25/32”
33/64”
3/8”
2,860 lbs
BLU 100805
3/16”
5/16”
3-5/16”
2”
19/32”
7/16”
5,150 lbs
BLU 109505
3/16”
3/8”
3-15/32”
2”
3/4”
15/32”
7,700 lbs
BLU 109506
M6
12.58mm
104mm
64mm
3/4”
12mm
3,500 kg
BLU 109555
7/32”
3/8”
3-3/4”
2-3/8”
3/4”
1/2”
7,700 lbs
BLU 101163
1/4”
7/16”
4-3/16”
2-17/16”
29/32”
15/32”
9,030 lbs
BLU 101207
9/32”
15/32”
4-39/64”
2-3/4”
63/64”
9/16”
11,240 lbs
BLU 101208
5/16”
15/32”
5-1/8”
3-17/64”
63/64”
9/16”
11,240 lbs
BLU 101495
3/8”
9/16”
5-15/16”
3-1/2”
1-3/16”
23/32”
16,700 lbs
BLU 101913
1/2”
27/32”
8-1/16”
4-3/4”
1-57/64”
61/64”
28,600 lbs
Blue Wave Left Threaded Swage Studs - Imperial Highly polished AISI 316 stainless steel construction. ▪▪Drilled for split pin Part # Left
Rigging Hardware
BLU 940306A
G UNF
Wire
D1
L1
L2
L3
Break Load
1/4”
1/8”
1/4”
3-15/16”
1-57/64”
1-1/2”
2,850 lbs
BLU 940406A
1/4”
5/32”
19/64”
4-21/64”
1-57/64”
1-13/16”
2,850 lbs
BLU 940408A
5/16”
5/32”
19/64”
4-39/64”
2-5/16”
1-13/16”
5,150 lbs
BLU 940508A
5/16”
3/16”
23/64”
4-27/32”
2-5/16”
2-1/64”
5,150 lbs
BLU 940510A
3/8”
3/16”
23/64”
5-1/8”
2-31/64”
2-1/64”
7,700 lbs
BLU 945510A
3/8”
7/32”
27/64”
5-11/32”
2-31/64”
2-1/64”
7,700 lbs
BLU 946310A
3/8”
1/4”
1/2”
5-45/64”
2-31/64”
2-1/64”
7,700 lbs
BLU 946312A
1/2”
1/4”
1/2”
6-3/8”
3-5/32”
2-3/4”
11,850 lbs
Blue Wave Threaded Swage Studs - Metric Highly polished AISI 316 stainless steel construction.
Part # Right
Part # Left
BLU 900408
BLU 910408
G Metre
Wire
D1
L1
L2
L3
Break Load
M8
5/32”
3/8”
4-39/64”
1-49/64”
2-1/4”
5,150 lbs
BLU 900508 BLU 900510
BLU 910508
M8
3/16”
25/64”
4-27/32”
2”
2-1/4”
5,150 lbs
BLU 910510
M10
3/16”
25/64”
5-1/8”
2”
2-15/32”
7,700 lbs
Blue Wave - Rigging
255
Blue Wave Right Threaded Swage Studs - Imperial Highly polished AISI 316 stainless steel construction. ▪▪Drilled for split pin Part # Right
G UNF
Wire
D1
L1
L2
L3
Break Load
BLU 930306A
1/4”
1/8”
1/4”
3-15/16”
1-57/64”
1-1/2”
2,850 lbs
BLU 930406A
1/4”
5/32”
19/64”
4-21/64”
1-57/64”
1-13/16”
2,850 lbs
BLU 930408A
5/16”
5/32”
19/64”
4-39/64”
2-5/16”
1-13/16”
5,150 lbs
BLU 930508A
5/16”
3/16”
23/64”
4-27/32”
2-5/16”
2-1/64”
5,150 lbs
BLU 930510A
3/8”
3/16”
23/64”
5-1/8”
2-31/64”
2-1/64”
7,700 lbs
BLU 935510A
3/8”
7/32”
27/64”
5-11/32”
2-31/64”
2-1/64”
7,700 lbs
BLU 936310A
3/8”
1/4”
1/2”
5-45/64”
2-31/64”
2-1/64”
7,700 lbs
BLU 936311A
7/16”
1/4”
1/2”
6-1/4”
2-45/64”
2-1/64”
10,300 lbs
BLU 930711A
7/16”
9/32”
9/16”
6-3/8”
2-45/64”
2-3/4”
10,300 lbs
BLU 930712A
1/2”
9/32”
9/16”
6-11/16”
2-45/64”
2-3/4”
11,850 lbs
BLU 930812A
1/2”
5/16”
5/8”
7-9/32”
2-45/64”
3-5/32”
11,850 lbs
BLU 936312A
1/2”
1/4”
1/2”
6-3/8”
2-45/64”
2-3/4”
11,850 lbs
BLU 930816A
5/8”
5/16”
5/8”
8-21/32”
3-5/32”
3-17/64”
17,600 lbs
BLU 939516A
5/8”
3/8”
45/64”
8-21/32”
3-15/16”
3-1/2”
17,600 lbs
BLU 939520A
3/4”
3/8”
45/64”
9-1/16”
4-23/32”
3-1/2”
28,600 lbs
Blue Wave Swageless Eye Terminals Highly polished AISI 316 stainless steel construction. Part #
Wire
L1
L2
L3
T
D
KW1
KW2
BL (lbs)
BLU 821907*
9/32”
4-1/8”
3-1/2”
2”
23/64”
33/64”
45/64”
53/64”
10,340
BLU 821908*
5/16
4-49/64”
4-3/64”
2-1/16”
3/8”
9/16”
3/4”
15/16”
12,320
*Request Items
Blue Wave Swage Eyes Highly polished AISI 316 stainless steel construction. Part #
D1
D3
L1
L2
T
Break Load
BLU 190025
3/32”
3/16”
7/32”
1-15/16”
BLU 190003
1/8”
1/4”
1/4”
2-5/32”
1-1/4”
1/8”
1,750 lbs
1-1/2”
5/32”
2,850 lbs
BLU 190004
5/32”
5/16”
21/64”
2-5/8”
1-49/64”
3/16”
5,150 lbs
BLU 190005
3/16”
3/8”
27/64”
3”
2”
15/64”
7,700 lbs
BLU 190055
7/32”
3/8”
27/64”
3-11/32”
2-5/16”
15/64”
7,700 lbs
BLU 190063X
1/4”
1/2”
1/2”
4-1/8”
2-17/32”
25/64”
13,600 lbs
BLU 190007X
9/32”
1/2”
1/2”
4-21/64”
2-3/4”
25/64”
13,600 lbs
BLU 190008
5/16”
9/16”
37/64”
4-21/32”
3-17/64”
25/64”
16,700 lbs
BLU 190008X
5/16”
5/8”
37/64”
5-9/16”
3-17/64”
15/32”
21,500 lbs
BLU 190095
3/8”
5/8”
41/64”
5-1/2”
3-1/2”
7/16”
21,500 lbs
BLU 190095X
3/8”
3/4”
41/64”
6-1/2”
3-15/16”
5/8”
28,600 lbs
BLU 190013
1/2”
1/2”
49/64”
7-1/32”
4-23/32”
19/32”
28,600 lbs
Rigging Hardware
Wire
E
N
Blue Wave T-Rope Eyes - Forged Part #
BLU 616508F
W
Highly polished AISI 316 stainless steel construction. Rope
A1
A2
D1
D2
D3
R
5/32”
5/16”
11/32”
3/8”
23/32”
11/32”
5/32”
BLU 616512F
1/4”
1/2”
9/16”
17/32”
1-9/16”
35/64”
3/16”
BLU 616516F
5/16”
5/8”
45/64”
11/16”
1-25/64”
45/64”
1/4”
256
Blue Wave - Rigging
Blue Wave T-Rope Eyes Highly polished AISI 316 stainless steel construction. Part #
Rope
B
B1
B2
L1
L2
D
T
BLU 616506
1/8”
19/64”
1-3/32”
19/32”
3-3/32”
1-1/64”
1/4”
1/4”
BLU 616507
5/32”
21/32”
1-3/32”
19/32”
3-5/16”
1-1/64”
19/64”
19/64”
BLU 616509
3/16”
23/32”
1-19/32”
7/8”
3-59/64”
1-3/8”
11/32”
23/64”
BLU 616512
1/4”
1-5/64”
1-17/32”
7/8”
4-7/16”
1-3/8”
1/2”
1/2”
Blue Wave Stemball Eyes
Rigging Hardware
Highly polished AISI 316 stainless steel construction. Part #
L1
L2
L3
BLU 19620926
3-1/4”
5/8”
7/16”
BLU 19621226
3-7/8”
39/64”
7/16”
BLU 19621426
4-1/8”
23/32”
3/8”
BLU 19621634
5”
13/16”
1/2”
L4
L5
D1
D2
R
13/16”
1/4”
13/32”
1”
3/8”
31/32”
5/16”
1/2”
1”
3/8”
1-1/16”
7/32”
1/2”
1”
3/8”
1-9/64”
3/8”
5/8”
1-11/32”
9/16”
Blue Wave Stemball Terminals
Blue Wave “T” Terminals
Highly polished AISI 316 stainless steel construction.
Highly polished AISI 316 stainless steel construction with swage depth marking.
Part #
Wire
L1
L2
L3
D1
D3
BLU 620003
1/8”
2-15/16”
2-1/8”
1-1/2”
1/4”
33/64”
BLU 620004
5/32”
2-23/32”
2-15/32”
1-49/64”
5/16”
5/8”
BLU 620005
3/16”
3-7/64”
2-27/32”
2”
3/8”
3/4”
BLU 620055
7/32”
3-11/32”
3-7/64”
2-5/16”
7/16”
25/32”
BLU 620063
1/4”
3-1/2”
3-17/64”
2-17/32”
1/2”
BLU 620007
9/32”
3-45/64”
3-27/64”
2-3/4”
9/16”
Part #
Wire
L1
L2
B
D1
T
BLU 610025
3/32”
3-17/64”
1-1/4”
19/32”
3/16”
1/4”
BLU 610003
1/8”
3-17/64”
1-1/2”
19/32”
1/4”
1/4”
BLU 610004
5/32”
3-31/32”
1-25/32”
21/32”
5/16”
19/64”
BLU 610005
3/16”
4-13/32”
2”
23/32”
3/8”
23/64”
BLU 610055
7/32”
5-1/2”
2-17/32”
1-1/64”
7/16”
7/16”
BLU 610063
1/4”
5-7/16”
2-33/64”
1-5/64”
1/2”
1/2”
25/32”
BLU 610007
9/32”
5-11/16”
2-25/32”
1-9/64”
9/16”
9/16”
27/32”
BLU 610008
5/16”
7-1/4”
3-17/64”
1-11/32”
5/8”
5/8”
BLU 610095
3/8”
8-3/16”
3-1/2”
1-25/64”
3/4”
45/64”
BLU 620008
5/16”
4-9/16”
4-1/4”
3-17/64”
5/8”
1-3/64”
BLU 620095
3/8”
5-5/64”
4-11/16”
3-1/2”
3/4”
1-5/64”
Blue Wave “T” Terminal Back Plates 616103 616105 616107
Highly polished AISI 316 stainless steel construction.
Blue Wave Terminal Cups Highly polished AISI 316 stainless steel construction.
616110 Part #
Wire
L3
D1
D2
BLU 626204
1/8”-5/32”
7/16”
1-1/64”
11/32”
BLU 626205
3/16”
7/16”
1-1/64”
7/16”
Part #
BLU 626207
7/32”-9/32”
25/64”
1-1/64”
5/8”
BLU 616103
BLU 626212
5/16”-3/8”
15/32”
1-11/32”
25/32”
BLU 616105 BLU 616107 BLU 616110
Wire
L1
L2
B
D
3/32”-1/8”
1-31/32”
1/2”
19/32”
9/32”
5/32”-3/16”
3-15/32”
1”
1”
3/8”
1/4”-9/32”
4-27/32”
1-23/64”
1-1/2”
19/32”
5/16”-3/8”
5-15/16”
1-39/64”
1-1/2”
3/4”
257
Blue Wave - Rigging Blue Wave Turnbuckle Bodies
Blue Wave Chromed Bronze Bodies
Highly polished AISI 316 stainless steel construction.
Chromed bronze open body prevents the threads from seizing.
Part #
G UNF
L1
D
Break Load
BLU 011206A
1/4”
3-5/8”
25/64”
2,850 lbs
BLU 011208A
5/16”
4-13/32”
17/32”
5,150 lbs
BLU 011210A
3/8”
4-29/32”
11/16”
7,700 lbs
BLU 011211A
7/16”
4-29/32”
11/16”
7,700 lbs
BLU 011212A
1/2”
5-29/32”
27/32”
11,850 lbs
BLU 011216A
5/8”
7-1/2”
1-1/16”
17,600 lbs
BLU 011220A
3/4”
8-21/32”
1-5/16”
28,600 lbs
Part #
M
L1 mm
D mm
BLU 011205
M5
80
8
800 Kg
BLU 011206
M6
92
10
1,300 Kg
Part #
G UNF
L1
D
Break Load
BLU 011306A
1/4”
3-15/16”
11/32”
2,850 lbs
BLU 011308A
5/16”
4-23/32”
7/16”
5,150 lbs
BLU 011310A
3/8”
5-5/16”
1/2”
7,700 lbs
BLU 011311A
7/16”
5-29/32”
19/32”
10,300 lbs
BLU 011312A
1/2”
6-11/16”
11/16”
11,850 lbs
BLU 011316A
5/8”
8-1/4”
13/16”
17,600 lbs
BLU 011320A
3/4”
9-27/32”
1”
28,600 lbs
Break Load
BLU 011208
M8
112
13.5
2,350 Kg
BLU 011210
M10
120
17.2
3,500 Kg
Blue Wave Threaded Fork Toggle Ends Highly polished AISI 316 stainless steel construction. ▪▪Drilled for split pin Part # Right
Part# Left
G UNF
A
Pin
B
L1
L2
L4
Break Load
5/16”
1/4”
35/64”
3-17/64”
1-27/32”
4-3/64”
2,865 lbs
BLU 033306AB
BLU 023308AB
BLU 033308AB
5/16”
25/64”
5/16”
1/2”
4-1/8”
2-1/4”
13/16”
5,180 lbs
BLU 023310AB
BLU 033310AB
3/8”
15/32”
3/8”
43/64”
4-61/64”
2-31/64”
1-1/64”
7,715 lbs
BLU 023311AXB
BLU 033311AXB
7/16”
25/64”
15/64”
1-3/64”
5-37/64”
2-3/4”
1-3/32”
10,360 lbs
BLU 023312AXB
BLU 033312AXB
1/2”
33/64”
33/64”
1-3/64”
5-25/32”
3-5/32”
1-3/8”
11,900 lbs
BLU 023316AXB
BLU 033316AXB
5/8”
19/32”
25/32”
1-11/64”
7-53/64”
3-15/16”
1-5/8”
17,630 lbs
BLU 033320AXB
3/4”
15/16”
3/8”
1-9/16”
8-27/32”
4-23/32”
1-25/32”
28,600 lbs
-
Blue Wave Threaded Fork Toggle Ends - Metric Highly polished AISI 316 stainless steel construction.
G
A mm
Pin mm
B mm
L1 mm
L2 mm
L4 mm
Break Load
BLU 033206M
M6
8.0
6.35
14
88
47
12.8
1,300 Kg
BLU 033208M
M8
10.0
8
18
105
57
16
2,350 Kg
BLU 033212XM
M12
18.0
12.7
30
147
80
24.7
5,400 Kg
Part # Left
Rigging Hardware
BLU 023306AB
1/4”
258
Blue Wave - Rigging
Blue Wave Welded Thread Forks Highly polished AISI 316 stainless steel construction.
G UNF
A
Pin
L1
L2
L4
Break Load
BLU 021206AB
Part # Right
BLU 031206AB
1/4”
3/8”
1/4”
2-11/16”
1/2”
33/64”
2,850 lbs
BLU 021208AB
BLU 031208AB
5/16”
7/16”
5/16”
3-1/16”
19/32”
19/32”
5,150 lbs
BLU 021210AB
BLU 031210AB
3/8”
15/32”
3/8”
3-11/16”
3/4”
3/4”
7,700 lbs
BLU 021211AB
BLU 031211AB
7/16”
15/32”
7/16”
4-3/32”
29/32”
29/32”
10,300 lbs
BLU 021212AB
BLU 031212AB
1/2”
9/16”
1/2”
4-11/16”
31/32”
63/64”
11,850 lbs
BLU 021216AB
BLU 031216AXB
5/8”
23/32”
35/64”
5-5/16”
1-1/4”
1-19/64”
16,720 lbs
BLU 031220AB
3/4”
15/16”
3/4”
7-1/2”
1-1/2”
1-57/64”
28,600 lbs
-
Part # Left
Part # Right
Part # Left
M
A mm
D mm
L1 mm
L2 mm
L4 mm
Break Load
BLU 021206B
BLU 031206B
M6
7.5
5
67
12
10
1,000 Kg
BLU 021208B
BLU 031208B
M8
10
6
79
13
10
1,300 Kg
BLU 021208XB
BLU 031208XB
M8
11
8.1
82
15
11
2,350 Kg
BLU 021210XB
BLU 031210XB
M10
12
9.5
94
19
14.2
5,100 Kg
M14
14
14
137
33
26
5,900 Kg
M16
18
16
151
33
25
8,000 Kg
D2
L1
B
Break Load
BLU 021214XB -
BLU 031216XB
Blue Wave Threaded Eye Ends Highly polished AISI 316 stainless steel construction. ▪▪Left hand is drilled for split pin
Rigging Hardware
Part # Right
Left w/Cross Hole
M
BLU 021906A
BLU 033906A
-
1/4”
1/4”
9/16”
2-9/16”
5/32”
2,850 lbs
BLU 021908A
BLU 033908A
-
5/16”
5/16”
21/32”
3-1/16”
3/16”
5,150 lbs
BLU 021910A
BLU 033910A
-
3/8”
3/8”
7/8”
3-1/2”
15/64”
7,700 lbs
BLU 021911AX
BLU 033911AX
-
7/16”
7/16”
15/16”
3-27/32”
5/16”
10,300 lbs
BLU 021912AX
BLU 033912AX
-
1/2”
1/2”
1-7/64”
4-1/8”
25/64”
11,850 lbs
M14
-
13mm
28mm
124mm
9mm
5,900 kg
BLU 021914
-
G UNF
D1
-
BLU 033916AX
-
5/8”
5/8”
1-13/32”
5-9/13”
15/32”
17,600 lbs
-
BLU 033920AX
-
3/4”
3/4”
1-9/16”
6-1/2”
5/8”
28,600 lbs
Blue Wave Toggles Highly polished AISI 316 stainless steel construction. A
B
D1
D2
L
Break Load
BLU 140506
Part #
17/64”
15/32”
3/16”
3/16”
63/64”
2,860 lbs
BLU 140608
5/16”
33/64”
1/4”
1/4”
1-1/16”
3,960 lbs
BLU 140810
3/8”
19/32”
5/16”
5/16”
1-1/4”
5,720 lbs
BLU 141011
1/2”
3/4”
3/8”
3/8”
1-15/32”
7,700 lbs
BLU 141111
17/32”
29/32”
15/32”
15/32”
1-3/4”
10,560 lbs
BLU 141214
33/64”
63/64”
1/2”
1/2”
1-7/8”
12,760 lbs
BLU 141616
13/16”
1-3/16”
33/64”
33/64”
2-15/16”
16,500 lbs
259
Blue Wave - Rigging Blue Wave Strap Toggles Highly polished AISI 316 stainless steel construction. Part #
BLU 140006
L
A
B
D
Break Load
1-3/32”
19/64”
17/64”
15/64”
3,900 lbs
BLU 140008
11/32”
11/32”
19/64”
5/16”
7,900 lbs
BLU 140010
49/64”
27/64”
3/8”
3/8”
8,800 lbs
BLU 140011
31/32”
29/64”
27/64”
7/16”
10,500 lbs
BLU 140012
1-31/32”
17/32”
15/32”
15/32”
12,700 lbs
BLU 140016
2-5/32”
11/16”
19/32”
5/8”
17,600 lbs
Blue Wave Double Jaw Toggles Highly polished AISI 316 stainless steel construction. Part #
L1
L2
L3
L4
D1
D2
BLU 250008
25/64”
45/64”
13/64”
1-3/16”
5/16”
5/16”
BLU 250010
15/32”
15/16”
1/4”
1-1/2”
3/8”
3/8”
BLU 250011
19/32”
1-3/16”
23/64”
1-21/32”
7/16”
7/16”
BLU 250012
45/64”
1-3/16”
7/16”
1-7/8”
1/2”
1/2”
BLU 250016
25/32”
1-3/8”
17/32”
2-1/4”
5/8”
5/8”
BLU 250019
15/16”
1-9/16”
11/16”
2-15/32”
3/4”
3/4”
Blue Wave Split Rings
Blue Wave Turnbuckle Lock Nuts
Highly polished AISI 316 stainless steel construction.
Highly polished AISI 316 stainless steel construction.
Dim
D
BLU 070601
Part #
1/32”
7/16”
Part # Right
BLU 070602
3/64”
19/32”
BLU 043004
BLU 070603
1/16”
3/4”
BLU 041205
BLU 070604
5/64”
29/32”
BLU 043006
Highly polished AISI 316 stainless steel construction. Part #
L
D
BLU 061605
5/8”
13/64”
BLU 061863
23/32”
1/4”
BLU 061806
17mm
6mm
BLU 062008
25/32”
5/16”
BLU 062395
29/32”
3/8”
BLU 062611
1”
7/16”
BLU 062812
25mm
12mm
BLU 051206
BLU 041206A
BLU 051206A -
BLU 041208
BLU 051208
BLU 041208A
BLU 051208A
BLU 043010
-
-
M4
-
M5
BLU 051205
BLU 041206 BLU 043008
Standard Nut
UNF
-
-
-
M6
-
M6
-
1/4”
-
-
-
-
M8
-
M8
-
5/16”
-
-
-
-
M10
BLU 041210
BLU 051210
-
M10
-
BLU 041210A
BLU 051210A
3/8”
-
-
BLU 041211A
BLU 051211A
7/16”
-
-
-
-
M12
BLU 043012
-
BLU 041212
-
BLU 041212A -
BLU 051212A BLU 051214 BLU 051216
-
M12
-
1/2”
-
-
-
M14
-
-
M16
-
BLU 041216A
BLU 051216A
5/8”
-
-
BLU 041220A
BLU 051220A
3/4
-
-
Rigging Hardware
Blue Wave Clevis Pins
Metric
Part # Left
260
Blue Wave - Rigging
Blue Wave Thimbles
Blue Wave Sailmaker “D” Shackles
High polished AISI 316 stainless steel construction.
High polished AISI 316 stainless steel construction. Screw pin style.
D
A
L
Break Load
Wire Size
A2
L1
L2
BLU 160041
Part #
5/32”
3/8”
19/32”
1,100 lbs
BLU 110002
3/32”
3/8”
29/32”
21/32”
BLU 160051
3/16”
7/16”
11/16”
2,200 lbs
BLU 110003
1/8”
3/8”
1”
11/16”
BLU 160052
3/16”
5/8”
15/16”
2,200 lbs
BLU 110004
5/32”
7/16”
1-3/32”
25/32”
BLU 160053
3/16”
5/8”
1-13/32”
2,400 lbs
BLU 110005
3/16”
1/2”
1-1/4”
13/16”
BLU 165206
1/4”
5/8”
29/32”
3,000 lbs
BLU 110006
1/4”
19/32”
1-19/32”
1-1/16”
BLU 110007
9/32”
3/4”
1-25/32”
1-9/32”
BLU 110008
5/16”
7/8”
2”
1-1/2”
BLU 110009
3/8”
15/16”
2-9/32”
1-19/32”
BLU 110010
7/16”
1-11/16”
2-9/16”
1-7/8”
BLU 110012
1/2”
1-1/8”
2-3/4”
2-1/8”
BLU 110014
9/16”
1-1/4”
3-7/64”
2-1/4”
BLU 110016
5/8”
1-9/16”
3-17/32”
2-5/8”
BLU 110018
11/16”
1-3/4”
4”
2-31/32”
BLU 110020
3/4”
2”
4-17/32”
3-5/16” 5-5/16”
Part #
BLU 110026
1”
3”
6-7/8”
Blue Wave “D” Shackles High polished AISI 316 stainless steel construction.
Blue Wave Key Pin Shackles High polished AISI 316 stainless steel construction.
Part #
D
A
L
Break Load
BLU 180005
3/16”
9/32”
1-13/32”
2,200 lbs
BLU 185205
3/16”
1/2”
1”
2,200 lbs
BLU 180006
1/4”
9/32”
1-9/16”
3,650 lbs
BLU 180008
5/16”
25/32”
1-19/32”
6,000 lbs
Blue Wave Halyard Shackles
Rigging Hardware
High polished AISI 316 stainless steel construction. ▪▪Keyed pin Part #
D
A
L
Break Load 1,100 lbs
BLU 150041
5/32”
3/8”
19/32”
BLU 150051
3/16”
7/16”
11/16”
2,200 lbs
BLU 150052
3/16”
5/8”
15/16”
2,200 lbs
Part #
D1
A
L1
L2
Break Load
3/16”
7/16”
9/16”
11/32”
1,500 lbs
BLU 150053
3/16”
5/8”
1-13/32”
2,400 lbs
BLU 180352
BLU 155251
3/16”
17/32”
1”
2,400 lbs
BLU 180305
3/16”
19/32”
13/16”
7/16”
1,500 lbs
1/4”
9/16”
1”
7/16”
3,300 lbs
5/16”
3/4”
1”
7/16”
4,350 lbs
BLU 155206
1/4”
5/8”
29/32”
3,000 lbs
BLU 180306
BLU 150062
1/4”
9/16”
1-9/16”
4,350 lbs
BLU 180308
BLU 150082
5/16”
11/16”
1-21/32”
6,600 lbs
Blue Wave Bow Shackles High polished AISI 316 stainless steel construction.
Part #
D
A
L
Break Load
BLU 150061
1/4”
9/16”
29/32”
4,350 lbs
BLU 150081
5/16”
11/16”
1-7/32”
6,600 lbs
BLU 150012
3/8”
1”
2”
15,400 lbs
261
Blue Wave - Rigging Blue Wave Twisted Shackles
Blue Wave Eye Straps
High polished AISI 316 stainless steel construction.
High polished AISI 316 stainless steel construction.
Part #
BLU 170005
Part #
D
D
A
L
Break Load
3/16”
7/16”
7/8”
2,600 lbs
BLU 150401
5/32” 13/64”
A1
A2
L
1-5/16”
7/16”
15/32”
1-11/32”
19/32”
9/16”
BLU 170053
3/16”
7/16”
1-9/32”
2,600 lbs
BLU 155102
BLU 170006
1/4”
9/16”
1-13/32”
4,350 lbs
BLU 155203
7/32”
1-23/32”
13/16”
3/4”
BLU 155304
7/32”
2-15/32”
1-3/32”
1-3/32”
BLU 156205
1/4”
2-21/32”
1-1/4”
1-9/32”
Blue Wave Forged Eye Bolts Highly polished AISI 316 stainless steel construction. G
L1
L2
B1
D
Break
BLU 310630
Part #
M6
2-3/32”
1-3/16”
1”
1/4”
2,800 lbs
BLU 310660
M6
3-9/32”
2-3/8”
1”
1/4”
2,800 lbs
BLU 310835
M8
2-9/16”
1-3/8”
1”
5/16”
5,250 lbs
BLU 310880
M8
4-11/32”
3-5/32”
1”
5/16”
5,250 lbs
BLU 311050
M10
3-7/16”
1-31/32”
1-3/16”
3/8”
7,700 lbs
BLU 311000
M10
5-3/8”
3-15/16”
1-3/16”
3/8”
7,700 lbs
Blue Wave Welded Eye Bolts Highly polished AISI 316 stainless steel construction. G
L1
L2
B
D
Break
BLU 370630
M6
2-1/4”
1-3/16”
1”
1/2”
2,800 lbs
BLU 370650
M6
3”
1-31/32”
1”
1/2”
2,800 lbs
BLU 370660
M6
3-7/16”
2-3/8”
1”
1/2”
2,800 lbs
BLU 370600
M6
4-31/32”
3-15/16”
1”
1/2”
2,800 lbs
BLU 370835
M8
2-19/32”
1-3/8”
1”
19/32”
5,250 lbs
BLU 370850
M8
3-5/32”
1-31/32”
1”
19/32”
5,250 lbs
BLU 370880
M8
4-11/32”
3-5/32”
1”
19/32”
5,250 lbs
BLU 371050
M10
3-11/32”
1-31/32”
1-3/16”
5/8”
7,700 lbs
BLU 371000
M10
5-5/16”
3-15/16”
1-3/16”
5/8”
7,700 lbs
BLU 371210
M12
5-1/2”
1-15/16”
1-3/16”
45/64”
9,900 lbs
BLU 371216
M12
7-7/8”
6-5/16”
1-3/16”
45/64”
9,900 lbs
Rigging Hardware
Part #
262
Blue Wave - Rigging
Blue Wave Eye Bolts w/Ring Highly polished AISI 316 stainless steel construction.
G
L1 mm
L2 mm
L3 mm
B1 mm
B2 mm
D1 mm
D2 mm
Break Load
BLU 380630
M6
47
46
30
25
5
13
30
950 kg
BLU 380660
M6
87
76
60
25
5
13
30
950 Kg
BLU 380835
M6
66
53
35
25
6
15
40
1,500 Kg
BLU 380880
M8
111
98
80
25
6
15
40
1,500 Kg
BLU 381050
M10
85
70
50
30
7
16
45
2,200 Kg
BLU 381000
M10
135
120
100
30
7
16
45
2,200 Kg
BLU 381210
M12
140
124
100
30
10
18
50
3,300 Kg
BLU 381216
M12
200
184
160
30
10
18
50
3,300 kg
Part #
Blue Wave “U” Bolts Highly polished AISI 316 stainless steel construction. Part #
Rigging Hardware
G
L1
L2
L3
L4
B
D
Break
BLU 340435
M4
2-19/32”
1-3/8”
1”
1-3/16”
1”
5/32”
1,600 lbs
BLU 340515
M5
1-47/64”
11/16”
1”
1/2”
1”
11/64”
1,950 lbs
BLU 340535
M5
2-21/32”
1-3/8”
1”
1-3/16”
1”
11/64”
1,950 lbs
BLU 340635
M6
2-21/32”
1-3/8”
1”
1-3/16”
1-1/16”
13/64”
2,700 lbs
BLU 340650
M6
3-5/16”
1-31/32”
1”
1-3/16”
1-1/16”
13/64”
2,700 lbs
BLU 340835
M8
2-13/16”
1-3/8”
1”
1-3/16”
1”
9/32”
3,800 lbs
BLU 348850
M8
3-17/32”
1-3/32”
1-3/16”
1-1/4”
1-21/32”
5/16”
3,800 lbs
BLU 340850
M8
3-3/8”
1-31/32”
1”
1-3/16”
1”
9/32”
3,800 lbs
BLU 340880
M8
4-9/16”
3-5/32”
1”
1-25/32”
1”
9/32”
3,800 lbs
BLU 341045
M10
2-23/32”
1-25/32”
1-9/16”
1-9/16”
1-3/16”
25/64”
7,700 lbs
BLU 341010
M10
5-29/32”
3-15/16”
1-9/16”
3-11/32”
1-3/16”
25/64”
7,700 lbs
BLU 341060
M10
4-11/32”
2-3/8”
1-9/16”
1-3/8”
1-3/16”
25/64”
7,700 lbs
BLU 341280
M12
4-15/16”
3-5/32”
1-3/16”
3-11/32”
1-3/8”
27/64”
11,200 lbs
Blue Wave “V” Bolts Highly polished AISI 316 stainless steel construction. G
L1 mm
L2 mm
L3 mm
L4 mm
A mm
B mm
D mm
Break Load
BLU 408500
M8
100
50
40
45
0
33
8
3,500 Kg
BLU 408508
M8
100
50
40
45
8
33
8
3,500 Kg
BLU 408518
M8
100
50
40
45
18
33
8
3,500 Kg
BLU 410600
M10
120
60
48
55
0
40
10
5,100 Kg
BLU 410608
M10
120
60
48
55
8
40
10
5,100 Kg
BLU 410618
M10
120
60
48
55
18
40
10
5,100 Kg
Part #
263
Blue Wave - Architectural
Blue Wave Stoppers Highly polished AISI 316 stainless steel construction. Wire mm
G
L mm
L1 mm
L2 mm
B mm
Slip load
BLU A650004
4 / 5/32”
M3
15
4
3
10
100 kg
BLU A650005
5 / 3/16”
M3
20
5
4
10
100 kg
BLU A650006
6 / 1/4”
M3
20
6
5
10
100 kg
BLU A650008
8 / 5/16”
M4
23
8
7
12
150 kg
Part #
Blue Wave Net Clips
Blue Wave WDS Stop Ball
Highly polished AISI 316 stainless steel construction. Used when crossed wires need connection.
Highly polished AISI 303 stainless steel construction.
Part #
Wire
G
L
L1
L2
L3
D1
BLU A600003O
3 / 1/8”
M10
19
5
8
3.2
17
BLU A600005O
5 / 3/16”
M12
23
5
10
5.2
20
BLU A600006O
6 / 1/4”
M12
36
6
14
8.3
24
Part #
BLU A240503
Wire
D
L
G
3 / 1/8”
15
12
M5
Blue Wave WDS Through Going Ball Highly polished AISI 303 stainless steel construction. Part #
BLU A250503
Highly polished AISI 303 stainless steel construction. Stopper slides over wire and attaches with an Allen key. Part #
Wire
G
D
D1
3 / 1/8”
M4
15
3.5
Wire
D
G
BLU A260003
3 / 1/8”
15
M5
BLU A260004
4 / 5/32”
M5
20
4.5
BLU A260005
5 / 3/16”
M5
20
5.5
Rigging Hardware
Blue Wave Ball Stoppers
264
Blue Wave - Architectural
Blue Wave Domehead Terminals Highly polished AISI 316 stainless steel construction. Part #
Wire Dia.
L1
L2
L3
A
A1
A2
BLU A100003
1/8”
35
25
32
3.5
5.5
8
BLU A100005
3/16”
41
30
37
5.3
7.5
12
Blue Wave Stop End Nuts Highly polished AISI 316 stainless steel construction. Part #
D1
D2
L1
L2
G
BLU A160503
8
12
33
30
M5
BLU A160604
8
12
39
35
M6
BLU A160806
10
14
45
40
M8
Blue Wave Thread Terminals - Small Highly polished AISI 316 stainless steel construction. Part # Right
Part # Left
G Metre
Wire
L1
L2
L3
D
A
BLU A180503
-
M5
3 / 1/8”
60
25
30
5.5
3.5
BLU A180604
BLU A190604
M6
4 / 5/32”
65
25
35
6.35
4.4
BLU A180605
BLU A190605
M6
5 / 3/16”
73
30
35
7.5
5.3
BLU A181008
-
M10
8 / 5/16”
103
50
45
12.58
8.4
Blue Wave Thread Pins AISI 316 stainless steel construction.
Rigging Hardware
Part #
Length
G
BLU A400503
38
M5
BLU A400604
45
M6
Blue Wave Dual Thread Screws AISI 304 stainless steel construction. ▪▪Right handed L
L1
L2
Ø
G
BLU A410503
Part #
70
30
24
5
M5
BLU A410806
90
40
40
8
M8
265
Blue Wave - Architectural
When planning a wire construction the ultimate break load, as well as the work load, must be calculated, as it will determine the minimum wire size and maybe the wire construction needed. Blue Wave’s fitting’, unless otherwise stated, are constructed after termination to meet 90% of the break load on the wire ropes that are standard in the market. PLEASE NOTE: In order to guarantee safety in a wire construction you should calculate a safety factor of 2-3 on static constructions and a minimum of 4 on dynamic constructions. As a general rule working loads should never exceed 25% of the break loads stated.
Blue Wave Swage Fork - Welded Highly polished AISI 316 stainless steel construction. Part #
BLU A360503
Wire
L1
L2
L3
D1
D2
D3
A
1/8”
50
25
12
5
5.5
3.5
7.5
Blue Wave Bodies Highly polished AISI 316 stainless steel construction.
Part #
G
L1
D1
BLU A011205
M5
60
8
BLU A011206
M6
65
10
BLU A011208
M8
80
14
WDS Break Loads Wire mm
Thread Metric
Break load kg
2,0
M4
500
2,0
M5
800
2,5
M5
800
3,0
M6
1250
4,0
M8
1300
5,0
M10
2600
6,0
M12
5100
7,0
M14
5900
8,0
M16
8000
10,0
M20
13000
12,0
M20
13000
14,0
M22
17000
16,0
M24
20000
19,0
M27
25500
22,0
M30
31000
26,0
M36
43000
A Full Range Of
BLUE WAVE
Blue Wave Threaded Fork - Welded
Part #
BLU A330503
Wire
G
L1
L2
L3
D1
A
1/8”
M5
49
30
12
5
7.5
Available On Request
Rigging Hardware
Architectural Products Are
Highly polished AISI 316 stainless steel construction. Welded forks with thread and pin for rigging screws. ▪▪Left handed
DIY Lifeline Fittings
Full Line of Hand Crimp, Machine Swage and DIY Cordage Fittings
Unique Accessories
WE KEEP YOU CONNECTED! Rigging Hardware
Calibrated Turnbuckle
Grab ‘n Go™ Hook Inner Forestay Lever
Folding Pad Eyes
Wrap Pins “Captain Hook” Chain Snubber (chain not included)
Splice Line Fittings
C. SHERMAN JOHNSON CO., INC. • East Haddam, CT 06423 USA Te l 8 6 0 . 8 7 3 . 8 6 9 7 • F a x : 8 6 0 . 8 7 3 . 8 5 8 9 • E m a i l : i n f o @ c s j o h n s o n . c o m w w w. c s j o h n s o n . c o m
267
Johnson - Lifeline Hardware
Johnson Mini Snap Gate Hook - “Over Center”
Not for lifting, hanging or other high load applications
Johnson Life Line Fittings
Mini Snap Gate Hook features the same “Over-Center” design as larger snap gate hoods. This feature allows easy opening and closing with no load on the swinging hook when closed. Ideal for lower lifelines and powerboats. ▪▪2-3/4” grip length, 3” overall ▪▪Investment cast T-316 stainless Part #
Wire
Description
Adjustment
Machine Swage
Hand Crimp These fittings were designed for easy installation by the boat owner or professional. A properly installed hand crimp fitting will hold 65-70% of the breaking strength of 7x7 cable. The proper crimping tool and instructions must be used to assure a safe installation. Machine Swage The ultimate in strength, durability, and aesthetics, giving you complete peace of mind. Lifelines are generally swaged by way of a rotating set of cold forming dies or a hydraulic press with a minimum 40 tons of pressure. Standard duty lifeline fittings match the strength of 7x7 coated or uncoated cable. 1x19 uncoated cable may also be used to meet the latest offshore rules.
JDH 21-784
1/8” wire
1/4-28 L.H.
1” adj.
JDH 21-786
3/16” wire
1/4-28 L.H.
1” adj.
Hand Crimp
JDH 26-784
1/8” wire
1/4-28 L.H.
1” adj.
JDH 27-786
3/16” wire
1/4-28 L.H.
1” adj.
Johnson Tubular Gate Hooks Inexpensive, slender tubular design with a stamped hook. Part #
Wire
Description
Adjustment
Machine Swage
JHD 21-304
1/8”
JHD 21-306
3/16”
1/4-28 L.H.
1-1/2”
1/4-28 L.H.
1-1/2”
Hand Crimp
Johnson Snap Gate Hooks Snap Gate Hook - “Over Centre” features the “over centre” design with no load on the swinging hook when closed. This allows easy opening yet stays secure with a heavy welded split ring on the plunger latching device. ▪▪T-316 stainless steel Part #
Wire
Description
Adjustment
Machine Swage
1/8”
JHD 21-886
3/16”
1/4-28 L.H.
1-1/4”
5/16-24 L.H.
1-1/4”
Hand Swage
JHD 26-884
1/8”
1/4-28 L.H.
1-1/4”
JHD 27-886
3/16”
5/16-24 L.H.
1-1/4”
Snap Gate Hook - Body Only Part#
1/4-28 L.H.
1-1/2”
JHD 27-403
3/16”
1/4-28 L.H.
1-1/2”
Johnson Wrap Pins Wrap Pins are neat Velcro locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the cotter attached to the Velcro through the hole and wrap the Velcro strip around the turnbuckle body. Works on open body turnbuckles and Johnson’s positive locking, slotted tubular turnbuckles. Three sizes work on 1/4”-1/2” threaded turnbuckles. Order by thread diameter. JHD WRAPC2 JHD WRAPC3 JHD WRAPC4
1/4", 2/pkg 5/16" & 3/8", 2/pkg 7/16" & 1/2", 2/pkg
Description
JHD 21-80
5/16”-24 L.H.
JHD 21-80-1
5/16”-24 R.H.
JHD 21-81
1/8”
1/4”-28 L.H.
Johnson Open Body Turnbuckles - Jaw to Swage Classic, traditional design. Chromed, forged silicon bronze body with T-316 stainless ends.
Johnson Snap Gate Repair Kit Repair kit for lost or worn latching mechanisms. JHD 21-850
Part #
Wire
Description
Adjustment
Machine Swage
JHD 42-314
1/8”
1/4” Pin
3”
JHD 42-316
3/16”
1/4” Pin
3”
Rigging Hardware
JHD 21-884
JHD 26-403
268
Johnson - Lifeline Hardware
Johnson Tubular Turnbuckles - Jaw to Swage
Johnson Interlocking Gate Eyes - Swivel
Check nut locking, T-316 stainless.
An interlocking gate eye is used at the opposite end of the gate as a “hinge” for the gate. ▪▪T-316 stainless steel Machine Swage
Part #
Wire
Description
Adjustment
JHD 22-312 JHD 22-314
Hand Crimp
Machine Swage
JHD 19-314
1/8”
1/4” Pin
3”
JHD 19-316
3/16”
1/4” Pin
3”
Hand Crimp
JHD 26-412
1/8”
1/4” Pin
3”
JHD 27-412
3/16”
1/4” Pin
3”
1/8” Wire 3/16” Wire
JHD 26-410 JHD 27-410
1/8” Wire 3/16” Wire
Johnson Interlocking Gate Eyes - Threaded Same as above only the terminal is threaded into the eye nut.
Johnson Tubular Turnbuckles - Hand Crimp
▪▪T-316 stainless steel
Machine Swage Eye to hand crimp with check nut locking. Used where an eye is required for attachment instead of a jaw. ▪▪T-316 stainless steel Part #
Wire
Adjustable
JHD 26-401
1/8”
3”
JHD 27-401
3/16”
3”
Johnson Single Gate Eyes - Swivel A single eye is used on one end of the gate area to attach the gate. ▪▪T-316 stainless steel Machine Swage JHD 22-311 JHD 22-313
1/8” Wire 3/16” Wire
Rigging Hardware
1/8” Wire 3/16” Wire
Johnson Single Gate Eyes - Threaded Same as above only the terminal is threaded into the eye nut. ▪▪T-316 stainless steel Machine Swage JHD 22-301 JHD 22-303
Hand Crimp JHD 26-407 JHD 27-407
1/8” Wire 3/16” Wire
Hand Crimp JHD 26-408 JHD 27-408
1/8” Wire 3/16” Wire
Johnson Toggle Jaws - “T” Style Generally used at the stern rail when no gate is required with a turnbuckle forward. ▪▪T-316 stainless steel Part #
Wire
Description
Machine Swage
JHD 25-314
1/8”
1/4” Pin
JHD 25-316
3/16”
1/4” Pin
Hand Crimp
Hand Crimp JHD 26-409 JHD 27-409
JHD 22-302 JHD 22-304
1/8” Wire 3/16” Wire
JHD 27-415
Techno Tip One of the most neglected parts on a sailboat are the Life Line and Rigging Turnbuckles. Turnbuckles need to be kept free of dirt and salt by rinsing with fresh water periodically. A good marine lubricant like Johnson Sealube or equivalent should be applied to the threads. The lubricant will provide corrosion protection and keep the turnbuckles turning freely. Never straighten a bent threaded stud, always replace it. A bent stud is considerably weakened.
1/4” Pin
Johnson Toggle Jaws - Old Style Generally used at the stern rail when no gate is required with a turnbuckle forward. Uses a toggle nut instead of a “T” bolt. ▪▪T-316 stainless steel Part #
Wire
Description
Machine Swage
JHD 25-304 1/8” Wire 3/16” Wire
3/16”
JHD 25-306
1/8”
1/4” Pin
3/16”
1/4” Pin
Hand Crimp
JHD 26-405
1/8”
1/4” Pin
JHD 27-405
1/8”
1/4” Pin
269
Johnson - Lifeline Hardware Johnson Stanchion Terminals
Johnson Turnbuckle Bodies
Used to terminate cable at stanchion. ▪▪T-316 stainless steel
▪▪Use for lifeline or rigging applications ▪▪Chromed silicon bronze
JHD 25-306-5F JHD 100-110-1
3/16” Wire (a) 1/8” Wire (b)
Part #
Johnson Adjusters - Short Generally used at the stern rail in conjuncture with a single gate eye to tension that section of the gate. ▪▪T-316 stainless steel Part #
Wire
Description
Thread Size
Style
JHD 34-601
10-32
Tubular
JHD 34-602
1/4-28
Tubular
JHD 34-602S
1/4-28
Shortie
JHD 34-603
5/16-24
Tubular
JHD 34-610
1/4-24
Open Body
JHD 34-611
5/16-24
Open Body
JHD 34-612
3/8-24
Open Body
Adjustment
Machine Swage
JHD 24-303
3/16”
JHD 26-406
1/8”
1/4” Pin
1”
JHD 27-406
3/16”
1/4” Pin
1”
1/4” Pin
1”
Hand Crimp
Johnson Studs for Hand Crimping Life line replacement parts. ▪▪T-316 stainless steel Part #
Thread Size
Wire Size
Hand Crimp
Johnson Adjuster Turnbuckle - Jaw to Swage
JHD 31-601
1/4-28 L.H. x 3/8”
1/8”
Stamped, strap design turnbuckle with knurled nut for adjustment. T-316 stainless/bronze construction.
JHD 31-602
1/4-28 L.H. x 1-1/2”
1/8”
JHD 31-603
1/4-28 L.H. x 2-1/2”
1/8”
JHD 31-603-1
1/4-28 R.H. x 2-1/2”
1/8”
JHD 31-605
5/16-24 L.H. x 3/8”
3/16”
JHD 31-606
5/16-24 L.H. x 2”
3/16”
Part #
JHD 24-302
Wire
Description
Adjustment
3/16”
1/4” Pin
2-3/4”
Johnson Pulpit Anchor
JHD 29-501
1/2” hole
Johnson Stanchion Eye
5/16-24 R.H. x 2”
3/16”
JHD 31-607
1/4-28 L.H. x 2-1/2”
3/16”
JHD 31-607-1
1/4-28 R.H. x 2-1/2”
3/16”
JHD 31-608
1/4-28 L.H. x 2-1/2”
3/16”
Johnson Studs for Machine Swaging Life line replacement parts. ▪▪T-316 stainless steel Part #
JHD 30-601
Thread Size
Wire Size
1/4-28 L.H. x 3/8”
1/8”
This fitting is used on a stanchion for adding lower lifelines without the need to drill holes for the cable to pass through. ▪▪T-316 stainless steel
JHD 30-602-1
1/4-28 R.H. x 1-1/2”
1/8”
JHD 30-603
1/4-28 L.H. x 2-1/2”
1/8”
JHD 30-603-1
1/4-28 R.H. x 2-1/2”
1/8”
JHD 29-502
JHD 30-604
10-32 R.H. x 3”
1/8”
JHD 30-604-1
10-32 L.H. x 1-7/8”
1/8”
JHD 30-605
1/4-28 L.H. x 2-1/2”
1/8”
JHD 30-621
1/4-28 L.H. x 2-1/2”
5/32”
JHD 30-621-1
1/4-28 R.H. x 2-1/2”
5/32”
JHD 30-606
5/16-24 L.H. x 3/8”
3/16”
5/16” hole
JHD 30-607
5/16-24 L.H. x 2”
3/16”
JHD 30-607-1
5/16-24 R.H. x 2”
3/16”
JHD 30-608
1/4-28 L.H. x 2-1/2”
3/16”
JHD 30-608-1
1/4-28 R.H. x 2-1/2”
3/16”
JHD 30-610
1/4-28 L.H. x 2-1/2”
3/16”
Rigging Hardware
Can be used on the stern rail and bow pulpit to terminated jaw fittings for lower (or upper) lines. ▪▪T-316 stainless steel
JHD 31-606-1
270
Johnson - Lifeline Hardware
Johnson Conversion Sleeves
Johnson Clevis Pins
Allows the use of 3/16” lifeline fittings to be used with 1/8” cable. Slide over cable first then into fitting. ▪▪T-316 stainless steel
▪▪ T-316 stainless steel Dia.
Grip
JHD CP-3-13
3/16”
13/32”
JHD CP-3-17
3/16”
17/32”
JHD CP-3-32
3/16”
1”
JHD CP-3-9
3/16”
9/32”
JHD CP-4-13
1/4”
13/32”
These collars can be used at the gate instead of interlocking eyes. They maintain tension while gate is open. A set-screw holds them in place. ▪▪T-316 stainless steel
JHD CP-4-16
1/4”
1/2”
JHD CP-4-20
1/4”
5/8”
JHD CP-4-24
1/4”
3/4”
JHD 29-504 JHD 29-505 JHD 29-506
JHD CP-4-40
1/4”
1-1/4”
JHD CP-5-18
5/16”
9/16”
JHD CP-5-22
5/16”
11/16”
JHD CP-5-44
5/16”
1-3/8”
JHD CP-6-20
3/8”
5/8”
▪▪T-316 stainless steel ▪▪3/16” & 1/4”
JHD CP-6-26
3/8”
13/16”
JHD SP-1 Each JHD SP-1-P 10/pkg
JHD CP-6-52
3/8”
1-5/8”
JHD CP-7-28
7/16”
7/8”
JHD CP-7-40
7/16”
1-1/4”
JHD CP-7-52
7/16”
1-5/8”
JHD CP-8-24
1/2”
3/4”
JHD CP-8-32
1/2”
1”
JHD CP-8-40
1/2”
1-3/8”
JHD CP-10-34
5/8”
1-1/16”
JHD CP-10-40
5/8”
1-1/4”
JHD CP-10-48
5/8”
1-1/2”
JHD CP12-48-1
3/4”
1-7/8”
JHD 36-610 JHD 36-611
1/8-3/16” Machine swage 1/8-3/16” Hand crimp
Johnson Gate Stops
1/4” maximum outside dia. 5/16” maximum outside dia. 3/8” maximum outside dia.
Johnson Safety Pins
Johnson Sealube - Turnbuckle Lubricant Especially formulated for turnbuckles or any high bearing load, low speed application. Will carry higher bearing loads than any other lubricant. Provides powerful resistance to corrosion of the host metal. JHD 48-540
1 oz
Johnson Circular Pins
Rigging Hardware
▪▪Stainless steel JHD R-1-P JHD R-1-100 JHD R-2-P JHD R-2-1-P JHD R-2-1-100 JHD R-2-100 JHD R-3-P JHD R-3-100 JHD R-5-100 JHD R-5-P
For 3/16” pins For 3/16” pins For 3/16” & 1/4” pins For 3/16” & 1/4” pins For 3/16” & 1/4” pins For 3/16” & 1/4” pins For 1/4” & 3/8” pins For 1/4” & 3/8” pins For 1/2” & 5/8” pins For 1/2” & 5/8” pins
(20 pkg) (100 pkg) (Pig tail, 20 pkg) (20 pkg) (100 pkg) (Pig tail, 100 pkg) (20 pkg) (100 pkg) (100 pkg) (8 pkg)
Part #
271
Johnson - Marine Hardware Johnson Open Body Turnbuckles - Jaw and Machine Swage Jaws have a “T” construction. Forged & chromed silicon bronze & T-316 stainless steel. Type
Wire Size
Break Strength
Thread Size
Adjustment
Pin Dia.
Safe Working Load
JHD 42-114
“T” toggle
1/8”
2,500 lbs
1/4-28
3”
1/4”
1,000 lbs
JHD 42-115
“T” toggle
5/32”
2,500 lbs
1/4-28
3”
1/4”
1,000 lbs
Part #
Johnson Wire End Terminals For Machine Swaging
Johnson Tubular Turnbuckles - Classic Jaw and Machine Swage
▪▪T-316 stainless steel Part #
Jaws have a nut toggle construction. ▪▪T-316 stainless steel
Part #
Upper Terminal
Wire Size
Thread Size
Adjust
Pin Dia.
SWL lbs
JHD 04-105
LH
5/32”
1/4-28
3”
1/4”
1,000
JHD 05-105
RH
5/32”
1/4-28
3”
1/4”
1,000
Thread x Length
Wire Size
JHD 32-607
1/4-28 L.H. x 2-1/2”
3/32”
JHD 32-608
1/4-28 L.H. x 2-1/2”
1/8”
JHD 32-611
1/4-28 R.H. x 2-1/2”
1/8”
JHD 32-614
10-32 R.H. x 3”
3/32”
Johnson Open Body Turnbuckles - Jaw and Jaw ▪▪Jaws have “T” toggle construction ▪▪Forged & chromed silicon bronze & T-316 stainless steel Part #
JHD 42-110
Type
Wire Size
Break Strength
Thread Size
Adjustment
Pin Dia.
Safe Working Load
Jaw/Jaw
to 5/32”
2,500 lbs
1/4-28
3”
1/4”
1,000 lbs
Johnson Stainless Steel Tubular Turnbuckles - Jaw and Jaw
Type
Wire Size
Break Strength
JHD 03-110
Jaw/Jaw
to 3/32”
JHD 04-110
Jaw/Jaw
to 5/32”
Part #
Length
Thread Size
Closed
Open
Pin Dia.
Safe Working Load
1,000 lbs
10-32
6-3/8”
8-7/8”
13/16”
400 lbs
2,500 lbs
1/4-28
8”
11”
1/4”
1,000 lbs
Johnson Stay Adjuster - Calibrated Stainless steel fitting. Adjustment is made by turning the knurled nut. The terminal rod is made captive, therefore it cannot turn and cannot come apart even when fully extended. It produces a “fool proof” adjuster which cannot come apart either by an inexperienced crew or during the vibration of trailering on the road. Part #
JHD 11-103
Type
Wire Size
Break Strength
Thread Size
Length
Pin Dia.
Safe Working Load
Jaw/Swage
3/32”
1,000 lbs
10-32
2” Adj.
3/16”
400 lbs
Rigging Hardware
▪▪Jaws have “T” toggle construction ▪▪Check nut locking ▪▪T-316 stainless steel
272
Johnson - Marine Hardware
Johnson Toggle Jaw for Machine Swage This fitting’s universal toggle action prevents any adverse bending of wire. Toggle nut construction. Pins included. ▪▪T-316 stainless steel Part #
JHD 17-206
Wire Size
A
B
C
D
E
Before Swage Dia.
After Swage Dia.
Safe Working Load
3/16”
4-1/4”
2-1/4”
7/8”
3/8”
3/8”
.359”
.313”
2,800 lbs
Johnson Rigging Toggles These stainless steel rigging toggles are essential to prevent misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. A
B
C
D
E
F
G
Safe Working Load
JHD 12-120
Part #
1/4”
1/4”
.094”
5/16”
1”
5/16”
5/8”
1,000 lbs
JHD 12-121
5/16”
5/16”
.094”
19/64”
1-1/4”
11/32”
5/8”
1,600 lbs
JHD 12-122
3/8”
3/8”
.141”
23/64”
1-5/8”
13/32”
3/4”
2,800 lbs
JHD 12-123
1/2”
1/2”
.187”
31/64”
1-7/8”
17/32”
1”
4,200 lbs
JHD 12-124
5/8”
5/8”
1/4”
39/64”
2-1/4”
11/16”
1-1/4”
5,900 lbs
Johnson Turnbuckle / Deck Toggle Jaws
Johnson Adapter Link Plates
Use for lifeline or rigging applications, with machine or hand swage parts. ▪▪T-316 stainless steel
These very useful links come in pairs and will allow you to convert an eye to a jaw or a jaw to an eye. Must be used in pairs. Pins not included. ▪▪T-316 stainless steel
Part #
Rigging Hardware
Thread Size
Style
JHD 33-601
10-32 R.H.
‘T’ Toggle
JHD 33-602
10-32 L.H.
‘T’ Toggle
JHD 33-604
1/4-28 L.H.
Backstay Adj.
JHD 33-605
1/4-28 R.H.
Toggle Nut
JHD 33-606
1/4-28 L.H.
Toggle Nut
JHD 33-615
1/4-28 R.H.
‘T’ Toggle
JHD 33-616
1/4-28 L.H.
‘T’ Toggle
JHD 33-607
5/16-24 R.H.
Toggle Nut
JHD 33-608
5/16-24 L.H.
Toggle Nut
JHD 33-618
5/16-24 L.H.
‘T’ Toggle
JHD 33-610
3/8-24 L.H.
Toggle Nut
Pin Dia.
L
T
Safe Working Load
JHD 52-124
Part #
5/16”
1-5/16”
.185
1,600 lbs
JHD 52-125
3/8”
1-1/8”
.250
2,800 lbs
JHD 52-126
1/2”
1-5/16”
.280
4,200 lbs
JHD 52-127
5/8”
1-5/8”
.370
5,900 lbs
All Toggle Jaws can be used for life line and rigging applications except for Deck Toggles, which are used for Life Line applications only
273
Johnson - Marine Hardware Johnson Diamond Plate Backstay
Johnson Split Backstay Car
An integral part of the Split Backstay Adjuster System. Part No. 38-211 & 212 are double plates and may also be used with eye terminals. Pins not included. ▪▪T-316 stainless steel
This adjusting car replaces separate blocks and a connecting member. Tandem sheaves eliminate severe flexing of the backstay, providing a neat, thoroughly functional fitting. The 38 Series with Delrin sheaves is intended for boats under 30ft. Max wire: 3/16” ▪▪ T-316 stainless steel w/delrin sheaves
For Pin Dia.
Safe Working Load
JHD 38-210
Part #
1/4”
1,000 lbs
JHD 38-211
5/16”
1,600 lbs
JHD 38-212
3/8”
2,800 lbs
JHD 38-203 JHD 39-201
Sheave & becket, 3/16” wire (FIG 2) Sheave, 1/4” wire (FIG 3)
JHD 38-213
Delrin sheaves (each) Fig 2
Johnson Stay Extenders These stainless steel plates are designed for extending short stays, or to replace a turnbuckle. ▪▪All sizes include pins ▪▪T-316 stainless steel Part #
Fig 3
Pin Dia.
Max. Pin to Pin
Safe Working Load
JHD 16-204
1/4”
3-3/4”
1,000 lbs
JHD 16-205
5/16”
4-3/8”
1,600 lbs
JHD 16-206
3/8”
5”
2,800 lbs
JHD 16-208
1/2”
5-5/8”
4,200 lbs
JHD 16-210
5/8”
6-7/8”
5,900 lbs
Note: For maximum car release, use a 1.5 to 1 ratio between backstay base width and car height. Example: If a backstay is 5’ the car height should not exceed 7 1/2’ to 8’ in height off deck. Higher ratios may require manual release with aid of boat hook, etc.
Johnson Flag Mount Johnson Locking Nuts ▪▪T-316 stainless steel 10-32 10-32 1/4-28 1/4-28 5/16-24 5/16-24 3/8-24 3/8-24 1/2-20
R.H. L.H. R.H. L.H. R.H. L.H. R.H. L.H. R.H.
JHD 40-533
Johnson Add-A-Cleat Versatile cleat mounts directly to a stanchion or rail of 7/8” or 1”. Stainless steel bracket and clamp with a 4-1/2” nylon coated aluminum cleat. JHD 40-506
Johnson Shroud Cleat ▪▪Attaches to 5/32” thru 3/8” diameter wire or rod ▪▪T-316 stainless steel JHD 40-518
Rigging Hardware
JHD 35-601 JHD 35-602 JHD 35-603 JHD 35-604 JHD 35-605 JHD 35-606 JHD 35-607 JHD 35-608 JHD 35-609
Easily attaches to 7/8” and 1” diameter horizontal rail. Will accommodate 1” wooden staff with shoulder. ▪▪T-316 stainless steel
274
Johnson - Marine Hardware N
Johnson Toe Rail Folding Cleat
W E
Makes a perfect movable, mid-ship cleat for spring lines, etc. This cleat is mountable on all aluminum toe rails. The rail is protected by a silicon rubber pad for rattle free installation. The cleat folds out of the way when not in use, the husky 3/8” dia. cleat assures strength. The complete unit is T-316 stainless. Fits most symmetric and asymmetric aluminum toe rails. ▪▪SWL: 2000 lbs JHD 48-510
Johnson Track Mounted Folding Cleat 3/8" dia. folding cleat is mounted on a sliding stainless steel car for 1-1/4" track. The folding cleat is 8" long and features a knurled screw pin for adjustment along the track. The track surface is protected with a Teflon/fibre strip. The entire unit is made from T-316 stainless steel. ▪▪SWL: 2000 lbs ▪▪Track mounted folding cleat JHD 48-511
Johnson Mini Hinged Pad Eye ▪▪Suitable for awning and many other tie down applications ▪▪Working load should not exceed 400 lbs ▪▪Material is all T-316 stainless ▪▪Fastens with (2) 1/4" bolts (not supplied)
Rigging Hardware
JHD 48-570
Line sold seperately
Johnson Spliced Line Fittings Johnson now offers its popular life line fittings with eye ends for today’s high-tech, low stretch line. Johnson recommends 8mm Dyneema line in grey and blue. This line is a 12 strand single braid, 1/7th the weight of 1/4” 1x19 cable, offering the same strength at about the same cost. Johnson recommends changing out the line at 3 year intervals. Professional splicing recommended. JHD LS-2100 JHD LS-2200 JHD LS-2500 JHD LS-4200
Over centre gate hook with eye* Eye to eye fitting Toggle Jaw with eye Open body turnbuckle with eye
* Body Investment Cast in China ► Not for lifting, hanging or other high load applications. NOTE: Before and After swage dimensions are mil spec and conform to both our life line and rigging fittings with regard to all aspects except cable depth in fittings. (See chart below.) The primary difference between life line and rigging fittings is the cable depth, although other factors exist. Always use rigging fittings when in doubt or wherever high load applications exist. Never exceed the safe working load.
Terminal Wire Size
Thread Diameter
Before Swage Dimension
After Swage Dimension
1/8”
10-32, 1/4”
.250
.219
5/32”
1/4”, 5/16”
.297
.250
3/16”
1/4”, 5/16”, 3/8”
.359
.313
7/32”
3/8”
.427
.375
1/4”
5/16”
.427
.375
1/4”
3/8”
.494
438
5/16”
1/2”, 5/8”
.635
.563
3/8”
5/8”
.703
.625
Loos
275
Loos Tension Gauges
Loos Single & Double Shank Ball Stops Corrosion resistant steel. Part #
Wire Size
Double shank
LOO MS20663-C2
1/16”
LOO MS20663-C3
3/32”
LOO MS20663-C4
1/8”
LOO MS20663-C6
3/16”
Single shank
LOO MS20664-C3
3/32"
LOO MS20664-C4
1/8"
LOO MS20664-C5
5/32"
LOO MS20664-C6
3/16"
Loos Locoloc - Oval Sleeves Zinc plated copper sleeves for splicing wire rope. Part #
Wire Size
LOO SL-2-1.5P
3/64”
LOO SL-2-2P
1/16"
LOO SL-2-3P
3/32"
LOO SL-2-4P
1/8"
LOO SL-2-5P
5/32"
LOO SL-2-6P
3/16"
LOO SL-2-7P
7/32”
LOO SL-2-8P
1/4"
LOO SL-2-10P
5/16”
Copper round end stops for wire rope. Part #
Wire Size
LOO ST-2-1
1/32”
LOO ST-2-1.5
3/64”
LOO ST-2-2
1/16"
LOO ST-2-3
3/32"
LOO ST-2-4
1/8"
LOO ST-2-5
5/32"
LOO ST-2-6
3/16"
LOO ST-2-8
1/4"
LOO B-#90 LOO A-#91
Cable sizes 3/16”, 7/32, 1/4” & 9/32” Cable sizes 3/32”, 1/8” & 5/32”
Loos Professional Tension Gauges Especially designed for accurate, repeatable tuning of a sailboat’s standing rigging. Manufactured of rugged anodized aluminum, this gauge is corrosive resistant. Detailed operating instructions are included with each tension gauge. Higher accuracy and easier to use than standard models. The cable can be adjusted while the gauge remains on the cable. LOO PT-1 LOO PT-2 LOO PT-3
Cable sizes: 3/32”, 1/8” & 5/32” Cable sizes: 3/16”, 7/32” & 1/4” Cable sizes: 9/32”, 5/16” & 3/8”
Loos Rod Tension Gauges Series of gauges to measure the tension in rods from .172 to .375 inch in diameter over a range of approximately 5 to 25% of the breaking strength of the rod and provide an accuracy of + or - 5%. The RT series provides an increasing durability, accuracy and convenience of use. Manufactured of rugged anodized aluminum. Detailed operating instructions are included with each tension gauge. LOO RT-10 LOO RT-11
For rod sizes .172”, .198”, .225” & .250” For rod sizes .281”, .330” & .375”
Loos Cable Diameter Gauge Makes identification of cable diameter quick and easy. Shows metric and imperial scales. LOO GA 4
Rigging Hardware
Loos Locoloc - End Stops
An inexpensive yet accurate method of checking cable tension. Manufactured of rugged anodized aluminum, the gauge is corrosion resistant and will provide years of service. Detailed operation instructions accompany the gauges to ensure complete accuracy.
276
Sta-Lok
Invented by Ivor Barfield the STA-LOK selffit terminal was first introduced at the London International Boat Show in 1973. Today STA-LOK Terminals Ltd has become one of the world’s leading designers, manufacturers and suppliers of high quality stainless steel rigging hardware.
Sta-Lok Forks ▪▪Provides standard end fittings for 1 x 19 wire rope ▪▪For chain plates & fixing points ▪▪316 stainless steel Part #
Wire
A
B
C
D
P
STL 134-03
1/8”
39/64”
25/64”
5/16”
7/32”
13/64”
STL 134-04
5/32”
27/32”
37/64”
23/64”
1/4”
1/4”
STL 134-05
3/16”
31/32”
23/32”
29/64”
5/16”
5/16”
STL 134-55
7/32”
1-7/32”
7/8”
15/32”
3/8”
29/64”
STL 134-06
1/4”
1-3/16”
7/8”
5/8”
7/16”
27/64”
STL 134-07
9/32”
1-21/64”
1”
5/8”
7/16”
27/64”
STL 134-08
5/16”
1-29/64”
1-5/64”
3/4”
35/64”
1/2”
STL 134-10
3/8”
1-5/8”
1-5/32”
57/64”
35/74”
5/8”
Sta-Lok Eyes
Rigging Hardware
▪▪Provides standard end fittings for 1 x 19 wire rope ▪▪For chain plates & turnbuckles ▪▪316 stainless steel Part #
Wire
A
B
C
D
H
STL 133-03
1/8”
45/64”
25/64”
1/4”
13/64”
1/4”
STL 133-04
5/32”
51/64”
37/64”
5/16”
15/64”
5/16”
STL 133-05
3/16”
1-1/64”
45/64”
13/64”
19-64”
25/64”
STL 133-55
7/32”
1-7/32”
29/32”
15/32”
3/8”
29/64”
STL 133-06
1/4”
1-7/32”
29/32”
1/2”
3/8”
33/64”
STL 133-06-3/8”
1/4”
1-7/32”
29/32”
1/2”
3/8”
25/64”
STL 133-07
9/32”
1-9/32”
31/32”
17/32”
27/64”
33/64”
STL 133-08-1/2
5/16”
1-13/32”
1-1/16”
9/16”
15/32”
33/64”
STL 133-08-5/8
5/16”
1-13/32”
1-1/16”
5/8”
17/32”
5/8”
STL 133-10
3/8”
1-9/16”
1-5/32”
45/64”
17/32”
5/8”
Sta-Lok
277
Sta-Lok Cone Wedges 1 x 19 ▪▪Recommended where Sta-Lok terminals are being re-used ▪▪For wire sizes 1/8” - 1” ▪▪316 stainless steel
Sta-Lok Studs - UNF Thread
The 1 x 19 wedge must NOT be used for Dyform or compacted strand wire ropes.
Designed to suit most turnbuckles & fixing points. ▪▪RH Thread. ▪▪For 1 x 19 wire ▪▪316 stainless steel
STL 138-03 1/8” STL 138-04 5/32” STL 138-05 3/16” STL 138-55 7/32” STL 138-06 1/4” STL 138-07 9/32” STL 138-08 5/16” STL 138-10 3/8” STL 138-11 7/16” STL 138-12 1/2”
Part #
Wire
A
B
C
STL 136-03
1/8”
2-13/32”
2-1/32”
1/4”
STL 136-04
5/32”
2-17/32”
2-1/8”
5/16”
STL 136-05
3/16”
3-1/16”
2-5/8”
3/8”
STL 136-05-5/16
3/16”
2-9/16”
2-5/16”
5/16”
STL 136-05-7/16
3/16”
3-21/32”
2-15/16”
7/16”
STL 136-55
7/32”
3-5/16”
2-5/8”
3/8”
STL 136-55-7/16
7/32”
3-21/32”
2-15/16”
7/16”
Sta-Lok Wedges 7 Strand, Metric
STL 136-06
1/4”
3-11/16”
3-3/16”
1/2”
Suitable for use with 7 x 7 & 7 x 19 wire.
STL 136-06-3/8
1/4”
3-5/16”
2-5/8”
3/8”
STL 136-06-7/16
1/4”
3-21/32”
2-15/16”
7/16”
STL 136-07
9/32”
3-13/16”
3-3/16”
1/2”
STL 136-08
5/16”
3-7/8”
3-3/16”
1/2”
STL 127-04 4mm STL 127-05 5mm STL 127-06 6mm STL 127-07 7mm
STL 136-08-5/8
5/16”
4-11/32”
3-3/4”
5/8”
Sta-Lok Wedges 7 Strand, UNF
STL 136-10
3/8”
4-11/32”
3-3/4”
5/8”
STL 136-11
Suitable for use with 7 x 7 & 7 x 19 wire.
7/16”
5-15/32”
4-7/8”
3/4”
STL 136-12
1/2”
5-15/32”
4-7/8”
3/4”
STL 139-03 1/8” STL 139-04 5/32” STL 139-05 3/16” STL 139-06 1/4” STL 139-08 5/16” STL 139-55 7/32”
Sta-Lok Formers ▪▪316 stainless steel 1/8”
(3mm)
5/32” 3/16” 7/32” 1/4” 9/32” 5/16” 3/8” 1/2”
(4mm) (5mm) (5mm) (6mm) (7mm) (8mm) (10mm) (12mm)
Rigging Hardware
STL 115-03 STL 115-04 STL 115-05 STL 115-55 STL 115-06 STL 115-07 STL 115-08 STL 115-10 STL 115-12
Sta-Lok wedges for Dyform wire are available by request.
278
Wire / Transat Transat Coated Stainless Wire
DyForm Wire Unidirectional lay wire is used in rigging applications where designers desire a lower-stretch solution than standard 1x19 wire rigging. Dyform wire is twisted in only the left hand direction. This construction improves the strength and stiffness of the wire when compared to 1/19 wire of a similar diameter. Dyform is generally recommended for use with the appropriate swaged and swageless fittings without hydraulic cylinders. For use on keelboats as high performance standing rigging. Smoother finish gives lower aerodynamic drag, and breaking strength is increased over conventional wire by more than 30 percent. Manufactured from type 316 extra corrosion resistant stainless steel. ▪▪Sold by the foot Dia.
Break Load
ORM DY2.5
2.5mm (3/32”)
1518 lb
ORM DY3
3.0mm (1/8”)
2200 lb
ORM DY4
4.0mm (5/32”)
3915 lb
Part #
1 x 19
DyForm
▪▪PVC coated 7 x 7, 316 stainless steel wire ▪▪Lifelines, guard rails, suspension & tensioning ▪▪Characteristics: Very flexible ▪▪Sold by the foot or 500’ reels
Part #
Break Load
TMW CB119118/532-500
1 x 19
1/8” - 5/32”
1,587 lb
TMW CB7X718/316
7x7
1/8” - 3/16”
1200 lb
TMW CB7X718/316-500
7x7
1/8” - 3/16”
1200 lb
TMW CB7X7316/516
7x7
3/16” - 5/16”
3168 lb
TMW CW7X7316/516-500
7x7
3/16” - 5/16”
3168 lb
TMW CW7X718/316
7x7
1/8” - 3/16”
1200 lb
TMW CW7X718/316-500
7x7
1/8” - 3/16”
1200 lb
TMW CW7X718/14
7x7
1/8” - 1/4”
1200 lb
TMW CW7X718/14-500
7x7
1/8” - 1/4”
1200 lb
TMW CW7X7316/14
7x7
3/16” - 1/4”
3168 lb
TMW CW7X7316/14-500
7x7
3/16” - 1/4”
3168 lb
TMW CW7X7316/516
7x7
3/16” - 5/16”
3168 lb
TMW CW707014
7x7
1/4” - 3/8”
6100 lb
TMW CW707014-500
7x7
1/4” - 3/8”
6100 lb
CW = White
Rigging Hardware
Dia.
CB = Black
Wire Rigging
279
Transat 316 Stainless Steel Wire
Transat 316 Stainless Steel Wire
The finest combination of corrosion and fatigue-resistance with high strength. Available in either a 1 x 19, 7 x 7 or a 7 x 19 construction. The 7 x 7 (7 strands each made up of 7 wires) construction offers the better abrasion resistance while the 7 x 19 (7 strands each consisting of 19 wires) provides the better flexibility.
The finest combination of corrosion and fatigue-resistance with high strength. Available in either a 1 x 19, 7 x 7 or a 7 x 19 construction. The 7 x 7 (7 strands each made up of 7 wires) construction offers the better abrasion resistance while the 7 x 19 (7 strands each consisting of 19 wires) provides the better flexibility.
1 x 19 Wire Rope (AISI 316 Stainless Steel)
7 x 19 Wire Rope (AISI 316 Stainless Steel)
▪▪Applications: Suspension & control cables, standing rigging ▪▪Characteristics: Very stiff ▪▪Sold by the foot or in 500’ or 1000’ reels
▪▪Applications: Blind systems, halyards, steering cables ▪▪Characteristics: Very flexible ▪▪Sold by the foot or in 500’ reels Dia.
Break Load
TMW U719116
1/16”
480 lb
1102 lb
TMW U719116-500
1/16”
480 lb
3/32”
1102 lb
TMW U719332
3/32”
860 lb
TMW U119332-1000
3/32”
1102 lb
TMW U719332-500
3/32”
860 lb
TMW U119018
1/8”
1587 lb
TMW U719018
1/8”
1124 lb
TMW U119018-500
1/8”
1587 lb
TMW U719018-500
1/8”
1124 lb
TMW U119018-1000
1/8”
1587 lb
TMW U719532
5/32”
2000 lb
TMW U119532
5/32”
2833 lb
TMW U719532-500
5/32”
2000 lb
TMW U119532-500
5/32”
2833 lb
TMW U719316
3/16”
2822 lb
TMW U119532-1000
5/32”
2833 lb
TMW U719316-500
3/16”
2822 lb
TMW U119316
3/16”
4255 lb
TMW U719014
1/4”
5027 lb
TMW U119316-500
3/16”
4255 lb
TMW U719014-500
1/4”
5027 lb
TMW U119316-1000
3/16”
4255 lb
TMW U719516
5/16”
8500 lb
TMW U119732
7/32”
5445 lb
TMW U719516-500
5/16”
8500 lb
TMW U119732-500
7/32”
5445 lb
TMW U119732-1000
7/32”
5445 lb
TMW U119014
1/4”
7584 lb
TMW U119014-500
1/4”
7584 lb
TMW U119014-1000
1/4”
7584 lb
TMW U119932
9/32”
7824 lb
TMW U119932-500
9/32”
7824 lb
TMW U119932-1000
9/32”
7824 lb
TMW U119516
5/16”
10229 lb
TMW U119516-500
5/16”
10229 lb
TMW U119516-1000
5/16”
10229 lb
TMW U119038
3/8”
14506 lb
TMW U119038-500
3/8”
14506 lb
TMW U119038-1000
3/8”
14506 lb
TMW U119716
7/16”
19335 lb
TMW U119716-500
7/16”
19335 lb
TMW U119012
1/2”
26678 lb
TMW U119012-500
1/2”
26678 lb
Part #
Dia.
Break Load
TMW U707116-500
1/16”
445 lb
TMW U119332
3/32”
TMW U119332-500
Part #
7 x 7 Wire Rope (AISI 316 Stainless Steel)
TMW U707532
7x7
5/32”
Rigging Hardware
▪▪Applications: Suspension & positioning systems control cables, average duty movements ▪▪Characteristics: Flexible ▪▪500’ lengths
280
Rigging Loads
W ir e R i g g i n g Fa c ts a nd I nfor m atio n Break Loads
Facts and information - working with wire fittings.. When planning a wire construction the ultimate break load, as well as the work load, must be calculated, as it will determine the minimum wire size and maybe the wire construction needed. Blue Wave’s fittings, unless otherwise stated, are constructed after termination to meet 90% of the break load on the wire ropes that are standard in the market. PLEASE NOTE : in order to guarantee safety in a wire construction you should calculate a safety factor of 2-3 on static constructions and a minimum of 5 on dynamic constructions. As a general rule working loads should never exceed 20% of the break loads.
Wire Ø Inch
Wire Ø Metre
UNF Thread Size
Break Load
1/8”
3
1/4”
1300 kg
5/32” 5/32”
4 4
1/4” 5/16”
1300 kg 2350 kg
3/16” 3/16” N/A
5 5 6
5/16” 3/8” 3/8”
2350 kg 3500 kg 3500 kg
1/4” 1/4”
N/A N/A
3/8” 1/2”
3500 kg 5400 kg
N/A 9/32” 9/32”
6 7 7
1/2” 1/2” 7/16”
5400 kg 5400 kg 4700 kg
5/16” 5/16”
8 8
1/2” 5/8”
5400 kg 8000 kg
3/8” N/A 3/8” N/A
N/A 10 N/A 10
5/8” 5/8” 3/4” 3/4”
8000 kg 8000 kg 13000 kg 13000 kg
N/A 1/2” N/A
12 N/A 14
3/4” 3/4” 7/8”
13000 kg 13000 kg 17000 kg
5/8”
16
1”
24000 kg
3/4”
19
1-1/8”
25500 kg
7/8”
22
1-1/4”
31000 kg
1”
26
1-3/8”
43000 kg
Rigging Hardware
Swage Dimensions Wire Ø mm
Wire Ø Inch
Inside diameter (+/-0.2) mm
Outside diameter (+/-0.10) mm
Depth (+/-1.5) mm
After Swaging mm
2.0
1/16”
2.2
5.50
32
4.7 - 4.82
2.5
3/32”
2.8
5.50
32
4.7 - 4.82
3.0
1/8”
3.5
6.35
38
5.44 - 5.56
4.0
5/32”
4.4
7.50
45
6.23 - 5.35
5.0
3/16”
5.3
9.00
51
7.83 - 7.95
5.5
7/32”
5.8
10.80
59
9.35 - 9.50
6.0
N/A
6.5
12.58
64
10.95 - 11.12
6.3
1/4”
6.8
12.58
64
10.95 - 11.12
7.0
9/32”
7.5
14.20
70
12.5 - 12.7
8.0
5/16”
8.4
16.00
83
14.07 - 14.3
9.5
3/8”
10.0
17.80
89
15.7 - 15.9
10.0
N/A
10.5
17.80
89
15.7 - 15.9
N/A
7/16”
N/A
19.83
N/A
N/A / .468”
12.0
N/A
12.5
20.00
105
17.6 - 17.8
13.0
1/2”
13.5
21.40
120
18.82 - 19.05
14.0
N/A
14.8
25.00
140
22.0 - 22.23
16.0
N/A
17.0
28.00
160
25.15 - 25.40
19.0
N/A
20.0
34.50
200
31.44 - 31.75
22.0
N/A
23.5
40.50
230
36.2 - 36.50
26.0
N/A
27.5
46.00
280
40.97 - 41-28
Sailing
281
CLAMCLEAT
283
FORESPAR
290
GLOMA
296
HARKEN
336
HARKEN HOISTERS
336
HARKEN SPORT
336
IYE
337
LEV-O-GAGE
337
PLASTREAM
337
RWO
338
SELDEN SPARS
354
SEOLADAIR - BOOMKICKER
354
SPARTITE
354
SPINLOCK DECKWARE
355
SPINLOCK HARDWARE
362
TRANSAT
368
TYLASKA
369
WICHARD
370
Micros cleat range Nylon and Aluminium Small, neat and lightweight for 1- 4mm 3/64” - 5/32” rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular or flat surfaces. Some Applications - Window blinds (cord control). Canoes (seat & rudder lines). Control lines on dinghies (Optimist booms & carbon tillers). Kitesurfing (5th line adjustment). Open Cleat
Aluminium or Nylon Fairlead Cleat
Aluminium or Nylon
Aluminium or Nylon. Compact to fit into small locations. Ideal when a rope is not always cleated. Fairlead strengthens cleat and allows quick fine adjustments of the rope. Helps hold rope into teeth when a line is flogging.
Fairlead Cleat with Becket
Large Becket makes it easy for frequent de-rigging. Aluminium only
Side entry Cleat with Becket
Aluminium only
Side entry cleats gives the benefit of a fairlead but use of temporary cleating. Tapered Pad allows correct rope/cleating alignment. Cleats can be mounted either way round. Pads can be stacked to increase angle or create a riser block. Backplate provides support on Allows tensioning thin deck sections. without rubbing rope over teeth.
Clamcleats Limited Watchmead Welwyn Garden City Hertfordshire AL7 1AP England Telephone 01707 330101 Fax 01707 321269 e-mail
[email protected] www.clamcleat.com
Clamcleat
283
A deceptively simple ridged ‘V’ groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Marine grade nylon cleats offer very good value for money, for both production builder and sailor alike. They are ideal for most applications where high loads or rope surges are not likely to be encountered. Nylon cleats are corrosion resistant and will last for many years outdoors. Aluminum cleats are highly successful in providing a complete answer to rope burn. They are unaffected by the heat generated by a rope surging back through a cleat as well as being suitable for sub-zero temperatures. All products listed are retail packaged OEM’s Contact us for BULK Packs
Clamcleat Cleats for Ropes to 5/32" Part #
CLM CL263/R
Description
Construction
Rope Size
Dimensions
Fastener
Micro
Nylon
3/64”-5/32”
1-3/4” x 15/16” x 1/2”
#4
Rope Size
Dimensions
Fastener
Clamcleat Cleats for Ropes to 5/32"
Part #
CLM CL268/R CLM CL268AN/R
CL270
CL268 / CL268AN
Description
Construction
Micro Cleat
Aluminum
3/64”- 5/32”
1-3/4” x 1/2” x 5/8”
#4
Racing Micro Cleat
Hard Anodized
3/64” - 5/32”
1-3/4” x 1/2” x 5/8”
#4
CLM CL270/R
Racing Micro w/Becket
Aluminum
3/64” - 5/32”
1-3/4” x 1/2” x 3/4”
#4
CLM CL270AN/R
Racing Micro w/Becket
Hard Anodized
3/64” - 5/32”
1-3/4” x 1/2” x 3/4”
#4
Clamcleat Cleats for Ropes to 1/4" CL204
Part #
CL802
CL222
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL204/R
Mini
Nylon
1/8" - 1/4"
2-1/16" x 1-7/16" x 5/8"
#4
CLM CL222/R
Racing Mini
Aluminum
1/8" - 1/4"
1-7/8" x 1-7/16" x 5/8"
#4
CLM CL222AN/R
Racing Mini
Hard Anodized
1/8" - 1/4"
1-7/8" x 1-7/16" x 5/8"
#4
Tapered Pad (204 & 222)
Polypropylene
-
2-1/4" x 13/16"
#4
CLM CL802/R
Sailing
Clamcleat Cleats for Ropes to 1/4"
Part #
CLM CL232/R
Description
Construction
Rope Size
Dimensions
Fastener
Cub
Nylon
1/8”-1/4”
1-3/8” x 1-3/8” x 1-7/16”
#4
284
Clamcleat
Clamcleat Cleats for Ropes to 1/4" CL203
CL211MK1
Part #
CL211MK2
Description
CLM CL203/R
CL702
Construction
Rope Size
Dimensions
Fastener
Junior
Nylon
1/8" - 1/4"
3-1/4" x 5/8" x 11/16"
#4
CLM CL211MK1/R
Racing Junior MK1
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL211MK1AN/R
Racing Junior MK1
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL211MK2/R
Racing Junior MK2
Aluminum
1/8” - "1/4"
2-1/8" x 1-1/16" x 5/8"
#4
CLM CL211MK2AN/R
Racing Junior MK2
Hard Anodized
1/8” - "1/4"
2-1/8" x 1-1/16" x 5/8"
#4
Boom Cleat
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL702/R CLM CL704/R CLM CL704AN/R
Boom Cleat
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
Racing Junior MK1 with Becket
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
Clamcleat Accessories
CL814/R
CL819/R
CL817/R CL815/R
CL816/R CL818/R
Part #
Description
CLM CL814/R
Keeper for CL203, CL211MK1, CL217MK1, CL218MK1 & CL236
CLM CL815/R
Keeper (Acetal) for CL211MK2 & MK2AN
CLM CL816/R
Cage for CL203, CL211MK1 &CL236
CLM CL817/R
Cage (Nylon & S/S) for CL211 MK2 & MK2AN
CLM CL818/R
Tapered Pad for CL203, CL211MK1, CL217MK1, CL218MK1, CL236 & CL704
CLM CL819/R
Tapered Pad (Polypropylene) for CL211MK2, CL217MK2 & CL218MK2
CLM PT230SSE*
Sailing
PT230SSE
Stainless steel eye for CL230 (6mm eye)
* Request Item
Clamcleat Omega Cleat
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL255/R
Part #
Omega
Aluminum
1/8” - 1/4”
1-13/16” x 1-1/16” x 1-11/16”
#4
CLM CL255AN/R
Omega
Hard Anodized
1/8” - 1/4”
1-13/16” x 1-1/16” x 1-11/16”
#4
285
Clamcleat Clamcleat Side Entry Cleats for Ropes to 1/4” CL217MK1
CL217MK2
Part #
CL218MK2
CL218MK1
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL217MK1/R
Side Entry (STB)
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL217MK1AN/R
Side Entry (STB)
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL217MK2/R
Side Entry (STB)
Aluminum
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
CLM CL217MK2AN/R
Side Entry (STB)
Hard Anodized
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
CLM CL218MK1/R
Side Entry (Port)
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL218MK1AN/R
Side Entry (Port)
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL218MK2/R
Side Entry (Port)
Aluminum
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
CLM CL218MK2AN/R
Side Entry (Port)
Hard Anodized
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
Clamcleat Sail Cleats CL212A CL214
CL258
CL241
CL212 Plate & Rivets
Part #
CLM CL212
Description
Construction
Rope Size
Dimensions
Fastener
Leech Line Cleat
Nylon
1/16” - 3/16”
2-3/4” x 1-15/16” x 13/16”
#4
Fine Line (STB) & B/Plate
Nylon
1/16” - 3/16”
2-3/4” x 1-15/16” x 13/16”
#4
Fine Line (STB) & B/Plate & Rivets
Nylon
1/16” - 3/16”
2-3/4” x 1-15/16” x 13/16”
#4
Shield
Nylon
-
-
-
CLM CL212BP
Backplate (CL212 & CL241)
Nylon
-
-
-
CLM CL213/R
Fine Line (Starboard)
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL214/R
Fine Line (Port) Black
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL214W
Fine Line (Port) White
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL212+PR CLM CL212+PR/R CLM CL212A
CLM CL214W+P
Fine Line (Port) & B/Plate
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL221
Dinghy Leech Line - Complete
Nylon
1/16” - 3/16”
1-3/4” x 1-3/16” x 11/16”
#3
CLM CL233*
Sail Line Cleat
Nylon
1/16” - 1/4”
2-1/4” x 1-3/8”
-
CLM CL241/R
Racing Sail Line Cleat
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL241+P
Racing Sail Line Cleat & B/Plate
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
Racing Fine Line (STB)
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL258+P
Racing Fine Line (STB) & B/Plate
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL259/R
Racing Fine Line (Port)
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL267
Racing Sail Edge Cleat
Nylon
1/16” - 3/16”
2” x 1-3/16” x 1-7/16”
#4
* Request Item
Sailing
CLM CL258/R
286
Clamcleat
Clamcleat Roller Cleats for Ropes to 5/16" CL236
CL230
Part #
CL253
Description
Construction
Rope Size
Dimensions
Fast
CLM CL230/R
Racing Junior Mk1 w/Roller
Aluminum
1/8" - 1/4"
3/14" x 2-5/8" x 11/16"
#5
CLM CL230AN/R
Racing Junior Mk1 w/Roller
Hard Anodized
1/8" - 1/4"
3/14" x 2-5/8" x 11/16"
#5
CLM CL236/R
Roller Fairlead Mk1 Racing Junior
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL236AN/R
Roller Fairlead Mk1 Racing Junior
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL253/R
Trapeze & Vang Cleat
Aluminum
3/16" - 5/16"
3-1/2" x 2-3/4" x 11/16"
-
CLM CL253AN/R
Trapeze & Vang Cleat
Hard Anodized
3/16" - 5/16"
3-1/2" x 2-3/4" x 11/16"
-
CLM CL834/R
Handle for Trapeze cleat
Clamcleat Auto Release Cleat
Part #
CLM CL257/R
Description
Construction
Rope Size
Dimensions
Fastener
Auto Release Racing Mini
Aluminum/Acetal
3/16" - 1/4"
2-5/8" x 1-13/16" x 7/8"
#4
Clamcleat Cleats for Ropes to 5/16" CL209
Part #
CL254
Description
Rope Size
Dimensions
Fastener
CLM CL209/R
Midi
Nylon
3/16" - 5/16"
2-7/8" x 2-1/8" x 3/4"
#5
CLM CL254/R
Racing Midi
Aluminum
3/16" - 5/16"
2-3/4" x 2-1/8" x 3/4"
#5
Racing Midi
Hard Anodized
3/16" - 5/16"
2-3/4" x 2-1/8" x 3/4"
#5
Tapered Pad (209 & 254)
Polypropylene
-
3-1/8" x 15/16"
#5
CLM CL254AN/R CLM CL803/R
Clamcleat Cleats for Ropes to 3/8” Sailing
Construction
CL803
Part #
Description
CL202
CL207
Construction
Rope Size
Dimensions
Fastener
CLM CL202/R
Horizontal
Nylon
1/4" - 3/8"
2-5/16” x 3-1/8”
#6
CLM CL206/R
Lateral (Starboard)
Nylon
1/4" - 3/8"
3" x 1-15/16"
#6
CLM CL207/R
Lateral (Port)
Nylon
1/4" - 3/8"
3" x 1-15/16"
#6
287
Clamcleat Clamcleat Cleats for Ropes to 1/2"
Part #
CL201
CL804
CL219
Description
Construction
CLM CL201-O
Old Style Vertical
Nylon
1/4” - 1/2”
4-1/4” x 1-1/2” x 1”
#6
CLM CL201/R
Vertical
Nylon
1/4" - 1/2"
3-3/4" x 13/16" x 1-1/8"
#6
CLM CL219/R
Racing Vertical
Aluminum
1/4" - 1/2"
3-9/16" x 2-13/16" x 1-1/16"
#6
CLM CL219AN/R
Rope Size
Dimensions
Fastener
Racing Vertical
Hard Anodized
1/4" - 1/2"
3-9/16" x 2-13/16" x 1-1/16"
#6
CLM CL228/R
Vertical w/Fairlead
Nylon
1/4" - 1/2"
4-1/2" x 2-13/16" x 1-3/16"
#6
CLM CL804/R
Tapered Pad (201 & 219)
Polypropylene
-
4-1/16" x 1-3/8"
#6
Clamcleat Cleats for Ropes to 5/8" CL205
Part #
CLM CL205/R
CL220
CL805
Description
Construction
Rope Size
Dimensions
Fastener
Major
Nylon
3/8" - 5/8"
4-13/16" x 3-3/4" x 1-7/16"
#8
CLM CL220/R
Racing Major
Aluminum
1/2" - 5/8"
4-5/8" x 3-3/4" x 1-7/16"
#8
CLM CL805/R
Tapered Pad (205 & 220)
Polypropylene
-
5-1/8" x 1-3/4"
#8
Clamcleat Cleats for Ropes to 5/16"
Part #
CL215
CL231
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL215/R
Side Fixing Midi
Nylon
5/32” - 5/16"
1-1/2” x 1-1/8” x 1-11/16”
#5
CLM CL231/R
Midi w/Integral Fairlead
Nylon
5/32” - 5/16"
3-7/16” x 2-1/8” x 7/8”
#5
Clamcleat Bollards
Part #
CLM CL208/R
Description
Construction
Rope Size
Dimensions
Fastener
Clam Bollard
Nylon
1/4" - 3/8”
3-3/8” x 2-1/2”
#6
Clamcleat Spring-Gate Cleats CL237/R & 239/R
Sailing
Part #
CL238/R
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL237/R
Vertical w/Spring Gate
Nylon
1/4" - 1/2"
3-3/4" x 13/16" x 1-5/8"
#6
CLM CL238/R
Racing Vertical w/Spring Gate
Aluminum
1/4” - 1/2”
3-9/16” x 13/16” x 1-5/8”
#6
CLM CL239/R
Major w/Spring Gate
Nylon
3/8” - 5/8”
4-5/8” x 3/4” x 1-5/8”
#8
288
Clamcleat
Clamcleat Mini Line-Lok Cleats
Part #
CLM CL266/R CLM CL260G/R
Description
Construction
Rope Size
Dimensions
Qty
Mini Line Lok
Nylon
to 1/8"
55/64” x 17/64
12/pkg
Mini Line Lok (Glow-In-Dark)
Nylon
5/64” - 3/16”
1-1/4” x 3/8”
8/pkg
Mini Line Lok
Nylon
5/64” - 3/16”
1-1/4” x 3/8”
8/pkg
CLM CL260/R
Clamcleat Cleats for Rigging on a Rope Ideal for hanging and adjusting fenders. CL223W
Part #
CLM CL223/R
Description
Construction
Rope Size
Dimensions
Loop Cleat (Black)
Nylon
1/8” - 1/4”
2-1/16” x 11/16”
CLM CL234/R
Fender/Large Loop Cleat (Black)
Nylon
1/4" - 1/2"
3-1/16" x 15/16"
CLM CL234W/R
Fender/Large Loop Cleat (White)
Nylon
1/4" - 1/2"
3-1/16" x 15/16"
Clamcleat Power Grip Cleats CL261/R
CL262/R
Description
Construction
Rope Size
Dimensions
CLM CL261/R
Part #
Power Grip 1
Aluminum
1/8" - 1/4"
3-3/4" x 11/16"
CLM CL262/R
Power Grip 2
Aluminum
1/8" - 1/4"
7-7/16" x 11/16"
Sailing
Clamcleat Tube Cleat
Part #
CLM CL244/R
Description
Construction
Rope Size
Dimensions
Fastener
Boom Cleat & Clamp
Aluminum/Nylon
1/8" - 1/4"
2-1/4"
#8
289
Clamcleat Clamcleat Windsurfing Cleats
Part #
CL248/R
CL252/R
CL250/R
Description
Construction
Rope Size
Dimensions
Fastener
Downhaul W/Hook & 3 Sheaves
Aluminum
1/8" - 3/16"
2-3/4" x 1-9/16”
-
CLM CL250/R
Gap Closer
Aluminum
1/8” - 3/16”
3-1/4” x 1-1/2”
#10
CLM CL252/R
Outhaul w/Fairlead
Aluminum
1/8” - 1/4”
2-1/4” x 1-3/4”
#10
CLM CL248/R
Clamcleat Kitesurfing Cleats CL265
CL264
Part #
Description
Construction
Rope Size
Dimensions
CLM CL264/R
Cobra Cleat
Aluminum
3/16” - 1/4”
4-23/32” x 29/32”
CLM CL265/R
Bar Cleat
Aluminum & S/S
5/32” - 5/16”
2-1/2” x 11/16”
Clamcleat Aero Cleats
CL826-11
CL827-11
▪▪Allows cleats to be rigged on a rope
Part #
Description
Construction
Rope Size
Dimensions
CLM CL826-11AN/R*
Base & CL211 MkAN (fits the Mk2 junior cleats)
Aluminum
1/16” - 1/4”
2-3/4” x 5/8”
CLM CL827-11AN/R*
Base & CL211 Mk1 Racing Junior (fits the Mk1 junior cleats)
Aluminum / Nylon
1/16” - 1/4”
4-3/8” x 3/4”
*Request Items
Sailing
290
Forespar
Forespar “Patented” Line Control Whisker Poles Line Control is a proven concept in telescoping whisker pole design and available only on Forespar Whisker Poles. Line Control poles are heavy duty two section aluminum spars which can be extended up to 27’ by simply un-cleating the line at the inboard end, extending or retracting the pole to the desired length and re-cleating the line. This adjustment process is quick and easy, even with the largest pole, and is executed with the operator positioned safely at the mast. End Fittings Part #
Other Sizes & Lengths Available on Request Please call
Recommended Mast Fittings
Collapsed Length/ Weight
Max. Working Length
Tubing Diameters
UXP
PE-3SC, RC-125, FC-125
10’ 1-3/4” / 17 lbs
18’- 2”
2” & 2-1/2”
EL
UTR
PE-3SC, RC-125, FC-125
10’ 1-3/4” / 17 lbs
18’ -2”
2” & 2-1/2”
UXP
UTR
RC-125, FC-125
12’ 4-1/2” / 27 lbs
22’ -1/4”
2-1/2” & 3”
Model #
Inboard
Outboard
FRS 401106
LC-18 EL-UXP
EL
FRS 401107
LC 10-18 EL-UTR
FRS 402200
LC 12-22 UXP-UTR
FRS 402201
LC 12-22 UTS-UTR
UTS
UTR
T-125, AT-125
12’ 4-1/2” / 28 lbs
22’ -1/4”
2-1/2” & 3”
FRS 403200
LC 13-24 UXP-UXP
UXP
UXP
RC-125, FC-125
13’ 6” / 38 lbs
22’- 8”
3” & 3-1/2”
FRS 403202
LC 13-24 UTS-UTR
UTS
UTR
T-125-S
13’ 6” / 39 lbs
22’ -8”
3” & 3-1/2”
Forespar Small Telescoping Whisker Poles
406100
Designed for boats up to 16 feet in length operating under most sail and wind conditions or boats up to 22 feet only under light wind conditions with a working jib. These telescoping models can be adjusted to any desired length within their range and securely locked in position with an effortless twist of the inner tube. There are two choices of outboard fittings; the original spike style (SE1 on the 4-8 pole and SE-2 on the 6-12 pole) which is inserted thru the bowline knot at the jib clew or the latch style (EF-1 on the 4-8 pole and EF-2 on the 6-12 pole) which attaches over the jib sheet outboard of the knot so that the sheet can run free if necessary. All small poles include strong corrosion-free Lexan end fittings and a Mast Pad Eye with stainless steel screws. Model
Ends
Telescopes
Diameter
Weight
FRS 404000
Part #
ADJ 4-8
Spike & Latch
53” to 93”
1”
3 lbs
FRS 404100
ADJ 4-8 DL
Latch & Latch
53” to 93”
1”
3 lbs
FRS 406000
ADJ 6-12
Spike & Latch
72” to 134”
1-1/4”
3 lbs
FRS 406100
ADJ 6-12-DL
Latch & Latch
72” to 134”
1-1/4”
3 lbs
Other Sizes & Lengths Available on Request Please call
Parts:
FRS 404011
PE-1 Pad eye
Sailing
Forespar Heavy Duty Telescoping Whisker Poles (Twist Lock) These telescoping whisker poles are heavy duty two section aluminum spars which can be extended to lengths up to 15’ and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series fittings on the inboard and outboard ends. Self-latching fittings on both ends. Part #
Model
Telescopes
Diameter
Weight
FRS 406300
HD 6-12-DL
79” to 138”
1-7/8”
8 lbs
FRS 407101
ADJ 7-15-DL
83” to 169”
2”
8 lbs
Parts: FRS 304015
Special inboard (big) end only (HD 6-12 DL)
Other Sizes & Lengths Available on Request Please call
291
Forespar Forespar Tri-Reacher Whisker Pole The new Forespar Tri-Reacher Whisker Pole has been developed specifically for use with asymmetrical nylon sails. Use of a whisker pole with these sails will allow deeper sailing angles and eliminate the need for constant jibing downwind. On long downwind legs, the additional rigging of fore and after-guys (attached to the outboard end) will further stabilize the pole. This will also allow emergency furling of the headsail without the need to go forward and deal with the pole first. This helps greatly when sailing at night or short-handed. The inboard ends are Forespar’s time proven “UTS” style socket end or “UXP” piston style. The outboard end is our “UXP” style. The “UTS” end will only fit the Forespar toggle/knuckle pin assemblies (#333010) as used on our fixed mast TS mounts (#333025) and our T-125-S mast cars (#333004). The “UXP” style fits #331000 RC-125 Ring Car or FC-125 (#332002) mast cars and #332025 fixed mast mounts. The toggle/knuckle pin assemblies can be used on other brands of mast cars such as Harken, Selden, Isomat and others. They require a1/2” hinge pin or bolt and 1” space between flanges/tabs. FRS 408200 FRS 408201
Tri reacher whisker pole UTS, 8’ to 20’ 10” Tri reacher whisker pole UXP, 8’ to 20’ 10”
Forespar Spinnaker Pole End Fittings Represents the cutting edge in spinnaker pole end fitting technology. Designed for high strength, very light weight and resistance to wear and corrosion, the Ultra Series composite end fitting is perfect for aluminum or carbon fibre spinnaker poles and whisker poles. The Ultra Series is the sailor’s choice for inshore and offshore racing and cruising. Available with or without triggers. Maximum LOA Boat Outboard End - 43’. Maximum LOA Boat Inboard End - 36’. All larger boats use GP Series. ▪▪Trip line is Spectra with terminal eye strap included. Length is sufficient for standard pole lengths based on diameter For Pole Model No.
Fits Diameter
FRS 304054
UXP-150-EF
1-1/2”
1.370”
2-3/4”
6.97 oz
FRS 304050
UXP-200-EF
2”
1.870”
2-3/4”
6.97 oz
FRS 304051
UXP-250-EF
2”-1/2”
2.334”
3-1/4”
9.25 oz
FRS 304052
UXP-300-EF
3”
2.835”
3”
11.92 oz
FRS 304053
UXP-350-EF
3.5”
3.26”
3.625”
15.72 oz
FRS 304060
UTR-200-EF
2”
1.87”
2.75”
9.97 oz
FRS 304061
UTR-250-EF
2-1/2”
2.334”
3-1/4”
9.25 oz
FRS 304062
UTR-300-EF
3”
2.835”
3”
11.92 oz
Part #
Tube Inside Dimension
End Fitting Length
End Fitting Weight
304054
304060
Parts:
FRS 309049 FRS 309080
TR-200 thru TR-450 repair kit XP-200 thru XP-450 repair kit
The UGPS end fitting comes with a stainless steel lined throat. As always, this deluxe ocean racing end fitting features a wide flared throat. UGPS ends also feature our proven spring loaded piston system with roller for positive lock and release. All UGPS ends for outboard pole end use only. Will not work with mast cars. All outboard ends are internal trip only. Pole end model number: UGPS-300-EF-ULTRA Part #
FRS 304021
► Also See
Tube Dia.
Tube ID
Weight
Fitting Length
3”
2.835”
2 lb 6 oz
5”
Transat Spinnaker Poles pg 368
Sailing
Forespar Offshore Series Grand Prix End GP & Ultra Series-GPS
292
Forespar Forespar Ring Style Mast Car
Forespar Mast Pad Eyes To complement most medium sized whisker poles. Two stainless steel styles available, for a flat or curved surface mount. ▪▪Measurements: 2-3/4" x 2", inside dia. 1-5/8" FRS 400001 FRS 400002 FRS 400012
FRS 339008 Track 1-1/4" clear 10' section FRS 339009 Track end stop MS-125
Forespar Heavy Duty Car This heavy duty, versatile mast car was developed to eliminate the possibility of binding as well as allowing poles up to 4-1/2" in diameter to hang vertically up the mast for storage. It incorporates an articulating flange that acts like a goose neck and reduces the chance of end fitting binding. This fitting can handle rough offshore work as well as spinnaker pole jibes under racing conditions. The FC-125 accepts all end fittings: Easy Latch (EL), Piston (XP), Trigger (TR), and the Ultra External Trip Piston (UXP) except the socket style fittings (TS & UTS). The FC-125 car fits the standard 1-1/4" T-track and requires a “heel lift” or uphaul/downhaul tackle system for vertical adjustment on the mast track. Shackles are provided on the top and bottom of the hinge pin for attaching blocks or dead-ending of control lines. Replaceable UHMW (ultra high molecular weight) inserts keep the car from galling on the track. FRS 332002
Forespar Stainless Steel Toggle Car
Sailing
FRS 331000 RC-125
PE-3SF Flat base PE-3SF Curved base PE-3SSF w/Struts, flat base
Forespar T-Track & Stops
The Toggle style sliding car, T-125-S is designed for large poles and offshore sailing conditions on boats 35 feet and over. This ultimate in sliding car design allows the pole to twist without binding as well as providing for the necessary vertical and horizontal movement. Allowing a whisker pole to twist helps eliminate much of the chafing which can occur on long downwind legs during trade-wind sailing. This style of mast car also allows for vertical pole storage (up to 4-1/2" dia.). Made to fit the standard 1-1/4" “T” track. FRS 333004 T-125-S
Parts:
FRS 331013
The ring and body of this unusually strong car is investment cast 17-4 heat treated stainless steel to provide great strength. Compatible with UXP and UTR pole end fittings. Ring I.D. is 1-5/8"
Replacement runners
Forespar Fixed Mast & FC Toggle Mounts ▪▪Add a spinnaker or wisker pole with out using a full track system on your mast ▪▪For boats 30 to 50’ ▪▪Fits mast thicknesses from 2-1/2” to 5-1/2” wide ▪▪7” length with 10 x 1/4” staggered mounting holes FRS 332025 FRS 333025
TS toggle (UTS & TS) FC toggle (Piston & Trigger style)
Forespar Deck Chock These are used to stow spinnaker poles or whisker poles on the deck. They have been designed to withstand rugged use, while also offering an almost “snag-proof” profile on the deck. The model DC-2 deck chock is the standard which accommodates all end fittings except the socket style inboard end fitting. FRS 300002
DC-2 (UXP & URT end)
Forespar Stanchion Mount Chocks Stanchion mounted pole chocks to help you clear the decks. These chocks are molded from durable, weather-resistant urethane and mount easily onto 1" stanchions. No drilling is necessary. Stanchion chocks are designed to accommodate poles from 2" to 3-1/2" in diameter. Stanchion chocks are sold individually. Two chocks are needed for each pole. Note the position of the stanchions relative to the desired pole location and select the chocks that match the pole O.D. at those two positions on the pole. FRS 300050 FRS 300042 FRS 300043 FSR 300044
SC-200 SC-250 SC-300 SC-350
2" dia. poles 2-1/2" dia. poles 3" dia. poles 3-1/2” dia. poles
293
Forespar Forespar Mast Pole Chocks
Forespar Vertical Pole Storage Car
Molded from durable high tech urethane, these chocks allow for storing the pole vertically against the face of the mast. Two MPC chocks mounted 2'-3' apart will help stop the pole from rattling. Caution: The outboard end of the pole should be protected or contained to prevent the jib sheets or other lines from catching on and pulling the pole out of its storage chocks.
This mast fitting can be rigged with the T-125 mast car. This mast fitting is a simple solution to vertical pole storage problems. The VPC-125 retains the upper end of the stowed pole on the mast centre line. The chock slides on the track and eliminates rattle, vibration and binding of the pole end. ▪▪Fits 1-1/4" T-Track
FRS 300072 FRS 300073 FRS 300074
MPC 300 3" MPC 350 3-1/2" MPC 400 4”
FRS 335102
Forespar Yacht Rod & Fittings Excellent vang/boom support for performance cruising and racing. Hard anodized aluminum & polished stainless steel. Supplied with wire cable ready to add your tackle system. Your 4:1 equals 8:1 when installed on Yacht Rod. Can be led to small winch for additional power. Spring return holds boom. Brackets for mast and boom sold separately. ▪▪Eliminates need for boom topping lift ▪▪Supports boom in light air and when reefing and lowering the mainsail ▪▪Faster than hydraulics - No messy hydraulics to leak ▪▪More efficient than conventional tackles ▪▪Tubing is white coated anodized 6061-T6 aluminum and electropolished 316 stainless steel ▪▪Precision machined 6061-T6 aluminum clevis ends, sheaves and Nylatron® bearings ▪▪Precipitation hardened stainless steel spring with fast-pin adjustment ▪▪No gas spring to lose its charge Description
Stroke
Adjustable Length
Adjustable Distance
Pin Size
Jaw Width
Weight
Max. Return Force
Medium Yacht Rod YR-Medium
7”
58-1/2” to 70-1/2”
12”
1/2”
3/8”
9.8 lbs
600 lbs
Part #
FRS 352000 FRS 352003
Medium boom lug YR-M
FRS 352005
Medium mast bracket YR-M
FRS 352103*
Boom Lug YR-L & XL
FRS 352104*
Mast Bracket YR-L & XL
* Request Items
352003
352103
352005
352104
Forespar Sail Saver Jib Rollers
Forespar Jib Roller
Sold in pairs, these light weight, easily installed rollers can be used on the spreader tips or life lines to help skirt the foot of the jib. Sail Savers can also be used on backstays of catamarans or other boats with large roached mainsails. Centre hole is 3/16” and can be drilled out to 3/8” maximum. No tools required for installation or removal. The two halves “mate” (slide them together and they lock) and two clips are snapped on for added safety.
Jib rollers for wire sizes 3/16” to 3/8”. Extend the life of your Genoa by reducing chafe on the spread tips. Jib rollers can also be used on lifelines to help skirt the foot of the jib over stanchions. Sold in pairs.
FRS 210020 SR-3
Made of high-strength polyethylene, these tough polymer guards are UV inhibited for long life. Shackle guards can also be used on lifelines to skirt genoas.
FRS 210003
Forespar Lanocote pg 141
SG-1 SG-2 SG-3 SG-4
2-1/4" dia. x 3/8" ID 2-1/4" dia. x 1/2" ID 3" dia. x 1/2" ID 3" dia. x 5/8" ID
Sailing
Forespar Shackle Guards
FRS 300006 FRS 300007 FRS 300008 FRS 300009
► Also See
SR-2 Jib Roller Wire 3/16”-3/8”
294
Forespar
Forespar Exit Box For use with the new high-tech fibres. Use this new exit on all trip lines and topping lifts. It is suitable for aluminum and ideal for carbon fibre poles as there is no metal to metal contact to promote corrosion. The axles are stainless steel molded into a strong Marelon® cheek with no moving parts. ▪▪Flange size: 3-1/4” L x 7/8” W ▪▪Cut-out size: 2” x 11/16” ▪▪Maximum line size: 1/4” ▪▪Uses two 3/16” flat head fasteners FRS 030016
Forespar Tiller Extensions An economical fixed length tiller extension features the removable Speed Lock (SL) fully universal composite end fitting mounted on rugged 5/8” diameter black anodized aluminum tubing with a rubber Ball End handle. It is designed for smaller boats (up to 22’ maximum) and is available in three lengths. The Speed Lock (SL) ends are fully universal and have been proven very strong and reliable. The composite universal swivel slides into a base that is permanently mounted to the tiller. To remove, simply push down on the “Speed-Lock” button and slide the extension off the base. The Speed Lock universal is threaded into the end of the tiller extension handle allowing for easy replacement should it be necessary. FRS 102002
30” ball grip
► Larger sizes available on request
Forespar “Big Sticks” Carbon Fiber Tiller Extensions ▪▪Light, stiff, rugged ▪▪Precise helm control ▪▪7/8” diameter shaft for a solid grip for either men or women All straight tubes so that they can be modified by each sailor to tailor fit his/her boat. Simply cut the tube to length on the outboard end. All come with the proven “speed lock” design for quick mount/dismount and easy replacement if necessary. The extensions are shipped loose for custom lengths to suit your class requirements.
Sailing
FRS 102214 30” FRS 102217 48”
Forespar “Giant Sticks” Carbon Fiber Tiller Extensions ▪▪Speed-lock end ▪▪Texture finished for positive grip The Big Stick’s big brother, the Giant Stick offers all the features of the Big Stick with a larger diameter tube for a more comfortable and positive feel. 1-1/4” diameter shaft for a solid grip for either men or women. FRS 102222 48”
► Also See
Tiller Extensions pg 340 & 368
Forespar Twist Lock Tiller Extensions The “TFP” style tiller extension is constructed of white powder coated anodized aluminum with a rubber ball style comfortable grip and stainless steel end fittings. Forespar “twist-lock” style tiller extensions are designed to work in either direction, this design has the advantage that if you forget which way you “locked” the unit, you can “unlock” it without forcing it to jam. Racers and cruisers use this rugged twist-lock telescoping detachable extension on boats in the mid to high 30’s. Because they are detachable, they need not be stored on the tiller. The all stainless steel “TFP” quick release end allows for full horizontal and vertical movement of the tiller extension and it can be removed with the simple push of a button located on the top of the fitting. FRS 104016 FRS 104017
TFP-S 19” to 32” TFP-M 27” to 48”
FRS 104004
TFP assembly c/w socket
Parts:
Forespar Fixed Twist Lock Tiller Extension The “Sta-Fast” style patented end fitting has the unique ability to hold the tiller extension up-just where you left it- without falling down below the level of the tiller. No more falling down out of reach! This “holding” feature is adjustable on the permanently mounted “Sta-Fast” end. The “Sta-Fast” style end is very strong and also features a double plate mount that keeps the thru-bolt from turning inside your tiller. The plates mount top and bottom on the tiller and also serve as a chafe-guard for the top of the tiller. Permanent mount only. Incorporates a 5/16" thru bolt which will accommodate tiller thickness up to 1-1/2". FRS 108100
SF-S 19" to 32"
Forespar Marelon Cleats Molded from high-strength Marelon for strength, light weight and low cost. The use of Marelon allows these cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion - will not soften on hot days or freeze in winter. Part #
Length
Hole Dia
FRS 941018
3"
5/32"
FRS 941016
4"
3/16"
FRS 941013
5"
3/16"
FRS 941014
6-1/2"
1/4"
FRS 941015
8"
1/4"
Forespar
295
Forespar Nash Labels
Forespar Spreader/Decklight
These popular label sets are great for any racer or cruiser. Add safety and organization to your above and below deck systems. Remember, not everyone on board knows your boat as well as you do. These high quality labels are self-adhesive, vinyl plastic, waterproof and won’t fade. Perfect for flat, round or irregular surfaces of metal, fibreglass or paint.
The ML-1 deck light is designed primarily for installation on the mast just below the spreaders. Made from a noncorrosive, durable molded polymer that saves weight and limits corrosion on the mast. The light incorporates a readily adaptable wraparound mounting apron to accommodate virtually any mast surface curvature. All light bodies are molded in black and are for 12 volt systems. ▪▪20W, 1.4 amps, replaceable halogen bulb ▪▪3-5/8” Vertical height
FRS 100013 FRS 100014 FRS 100016 FRS 100010 FRS 100011 FRS 100017 FRS 100015 FRS 100022 FRS 100023 FRS 100024
206 Spar 201 Cleat & winch 202 Control lines 203 Track numbers 204 Nash scale 0”-10” 207 Racing flags 208 Nash tank labels 212 Electrical wire 213 Instruments 214 Nash stopper labels
Forespar Railfast Antenna Mount Nylon mounts attach quickly to 1” or 7/8” railings, horizontally, vertically, or at any angle, providing a professional and secure mounting for standard VHF, CB, and Loran antennas up to 8’ in length. A special internal feed-through channel accommodates Loran cable that is routed directly out the bottom of the coupler. Secured to the rail using an allen key which is provided. FRS 156009 311NLH
Forespar Marelon Winch With exceptional strength, this lightweight winch will easily handle up to 200 square feet of sail. This winch is ideal for use on the modern trailer-sailor or the small racer. On larger boats, it is great for out-hauls and other control lines with relatively low loads. Uses four 1/4” fasteners (not included). ▪▪Accepts standard star drive winch handle ▪▪8:1 power ratio when used with a 10” handle ▪▪6:1 power ratio when used with an 8” handle ▪▪All Marelon construction ▪▪Height: 3-3/8” ▪▪Base: 3-5/8” x Top: 3-1/4” x drum diameter: 2-7/16” ▪▪Four fastener holes in 1-7/8” square pattern ▪▪Only weighs 0.86 lbs FRS 960003
Forespar Deck/Bow Light
FRS 132000 ML-2
Optional stainless steel chafe guard. ▪▪Height: 5-5/8” FRS 132200
S/S Guard
FRS 132025
Replacement upper bulb (ML-2)
Parts:
Parts:
FRS 132035
Replacement lower bulb (ML-1 & 2)
Forespar Lightning Master Static dissipaters lower the exposure to a direct lightning strike by controlling the conditions which trigger direct strikes (i.e. they reduce the build-up of static ground charge and retard the formation of the ion “streamers” which complete the path for a lightning strike). The dissipater employs the point-discharge principal to continually leak off the lightning causing ground potential in low amperage dissipation over a long period of time instead of the short duration. Length: 21” FRS 151100
Forespar Sta-Plug Emergency Plug ▪▪Soft foam fits irregular shaped leaks and holes ▪▪Can easily be cut with a knife to fit smaller holes ▪▪Ridged edges help hold plug in place ▪▪Form-fitting foam fills gaps ▪▪Fits into hard to reach areas ▪▪4-3/4" x 8-3/4" FRS 150110 Each
Forespar Water Light Built to meet US Code of Federal Regulations sub part 161.010; this rugged water light produces brilliant strobe flashes automatically when thrown overboard and is visible for miles at sea. When used with a 6 volt alkaline lantern battery (not included) it will flash at the U.S.C.G. required rate for over 52 hours and will still flash at least every 2 seconds after 7 days of continuous operation. ▪▪Meets U.S.C.G. requirements – 46 CFR-161-010 ▪▪Stainless steel molding bracket included ▪▪Dimensions: 11-1/2” long, and 4” maximum diameter FRS 205102
Sailing
For use on power or sail driven vessels under 20 meters (65.6 ft.). 3 mile visibility - complete with 10 watt/12 volt bulb. Features separate switching, 6” triple lead wire and is made from a noncorrosive, durable molded polymer that saves weight and limits corrosion on the mast. Also incorporated is a readily adaptable wraparound mounting apron to accommodate virtually any mast surface curvature. 6” triple lead wire.
FRS 131000
296
Gloma
Gloma Captive Pin, ‘D’ Shackles ▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Part #
Inside Width
Inside Length
Break Load
Gloma ‘D’ Shackles
GLO 101-I
5/32”
5/16”
11/16”
2,310 lbs
GLO 101-I-P
5/32”
5/16”
11/16”
2,310 lbs
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P)
GLO 102-I
3/16”
3/8”
3/4”
3,300 lbs
GLO 102-I-P
3/16”
3/8”
3/4”
3,300 lbs
GLO 103-I
1/4”
7/16”
13/16”
3,960 lbs
GLO 103-I-P
1/4”
7/16”
13/16”
3,960 lbs
GLO 104-I
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 104-I-P
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 105-I
3/8”
13/16”
1-3/8”
12,540 lbs
GLO 105-I-P
3/8”
13/16”
1-3/8”
12,540 lbs
Pin Dia.
Inside Width
Inside Length
Break Load
GLO 101
5/32”
5/16”
11/16”
2,310 lbs
GLO 101-P
5/32”
5/16”
11/16”
2,310 lbs
GLO 102
3/16”
3/8”
3/4”
3,300 lbs
GLO 102-P
3/16”
3/8”
3/4”
3,300 lbs
GLO 103
1/4”
7/16”
13/16”
3,960 lbs
GLO 103-P
1/4”
7/16”
13/16”
3,960 lbs
GLO 104
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 104-P
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 105
3/8”
13/16”
1-3/8”
12,540 lbs
GLO 105-P
3/8”
13/16”
1-3/8”
12,540 lbs
GLO 106
1/2”
1”
1-9/16”
17,600 lbs
GLO 106-P
1/2”
1”
1-9/16”
17,600 lbs
Part #
Gloma Flush Pin ‘D’ Shackles ▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Pin Dia.
Inside Width
Inside Length
Break Load
GLO 603
1/4”
7/16”
13/16”
5,060 lbs
GLO 603-P
1/4”
7/16”
13/16”
5,060 lbs
Gloma High Resistance ‘D’ Shackles
GLO 604
5/16”
5/8”
1-1/4”
9,020 lbs
GLO 604-P
5/16”
5/8”
1-1/4”
9,020 lbs
▪▪Specially treated to obtain a higher work load. Made in 17-4 Ph ▪▪Sold by the each, bulk or packaged (P)
GLO 605
3/8”
3/4”
1-7/16”
14,520 lbs
GLO 605-P
3/8”
3/4”
1-7/16”
14,520 lbs
GLO 606
1/2”
1”
1-5/8”
20,020 lbs
GLO 606-P
1/2”
1”
1-5/8”
20,020 lbs
Part #
Part #
GLO 103-HR
Sailing
Pin Dia.
Pin Dia.
Inside Width
Inside Length
Break Load
1/4”
7/16”
13/16”
5,720 lbs
GLO 103-HR-P
1/4”
7/16”
13/16”
5,720 lbs
GLO 104-HR
5/16”
11/16”
1-1/4”
10,340 lbs
GLO 104-HR-P
5/16”
11/16”
1-1/4”
10,340 lbs
GLO 105-HR
3/8”
13/16”
1-3/8”
16,500 lbs
GLO 105-HR-P
3/8”
13/16”
1-3/8”
16,500 lbs
Gloma Extra Wide ‘D’ Shackles ▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Pin Dia.
Inside Width
Inside Length
Break Load
GLO 502
3/16”
13/16”
1-7/16”
2,200 lbs
GLO 502-P
3/16”
13/16”
1-7/16”
2,200 lbs
GLO 503
1/4”
1”
1-11/16”
3,080 lbs
GLO 503-P
1/4”
1”
1-11/16”
3,080 lbs
GLO 504
5/16”
1-1/4”
2-1/4”
7,700 lbs
GLO 504-P
5/16”
1-1/4”
2-1/4”
7,700 lbs
GLO 505
3/8”
1-11/16”
2-3/4”
11,440 lbs
GLO 505-P
3/8”
1-11/16”
2-3/4”
11,440 lbs
Part #
297
Gloma
Gloma Captive Pin, Twisted Shackles
Gloma Long ‘D’ Shackles
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P)
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Pin Dia.
Inside Width
Inside Length
Break Load
GLO 201
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 201-P
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 202
3/16”
7/16”
1-5/8”
2,860 lbs
GLO 202-P
3/16”
7/16”
1-5/8”
2,860 lbs
GLO 203
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 203-P
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 204
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 204-P
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 205
3/8”
7/8”
2-7/8”
14,740 lbs
GLO 205-P
3/8”
7/8”
2-7/8”
14,740 lbs
Part #
Inside Width
Inside Length
Break Load
GLO 401-I
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 401-I-P
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 402-I
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 402-I-P
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 403-I
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 403-I-P
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 404-I
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 404-I-P
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 405-I
3/8”
13/16”
2-3/4”
10,340 lbs
GLO 405-I-P
3/8”
13/16”
2-3/4”
10,340 lbs
Gloma Twisted Shackles
Gloma Captive Pin, Long ‘D’ Shackles
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P)
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Pin Dia.
Inside Width
Inside Length
Break Load
GLO 201-I
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 201-I-P
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 202-I
3/16”
3/8”
1-5/8”
2,860 lbs
GLO 202-I-P
3/16”
3/8”
1-5/8”
2,860 lbs
GLO 203-I
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 203-I-P
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 204-I
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 204-I-P
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 205-I
3/8”
7/8”
2-7/8”
14,740 lbs
GLO 205-I-P
3/8”
7/8”
2-7/8”
14,740 lbs
Part #
Pin Dia.
Part #
Pin Dia.
Inside Width
Inside Length
Break Load
GLO 401
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 401-P
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 402
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 402-P
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 403
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 403-P
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 404
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 404-P
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 405
3/8”
13/16”
2-3/4”
10,340 lbs
GLO 405-P
3/8”
13/16”
2-3/4”
10,340 lbs
Part #
Sailing
298
Gloma
Gloma Bow Shackles
Gloma Captive Pin, Bow Shackles
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P)
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P)
Part #
Pin Dia.
Inside W
Inside Bow
Inside Length
Break Load
GLO 301
5/32”
5/16”
5/8”
7/8”
1,980 lbs
Inside Width
Inside Bow
Inside Length
Break Load
GLO 301-I
5/32”
5/16”
5/8”
7/8”
1,980 lbs
5/16”
5/8”
7/8”
1,980 lbs
11/16”
1”
2,640 lbs
GLO 301-P
5/32”
5/16”
5/8”
7/8”
1,980 lbs
GLO 301-I-P
5/32”
GLO 302
3/16”
3/8”
11/16”
1”
2,640 lbs
GLO 302-I
3/16”
3/8”
GLO 302-P
3/16”
3/8”
11/16”
1”
2,640 lbs
GLO 302-I-P
3/16”
3/8”
11/16”
1”
2,640 lbs
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
GLO 303
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
GLO 303-I
GLO 303-P
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
GLO 303-I-P
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
5/16”
5/8”
1”
1-5/8”
9,460 lbs
GLO 304
5/16”
5/8”
1”
1-5/8”
9,460 lbs
GLO 304-I
GLO 304-P
5/16”
5/8”
1”
1-5/8”
9,460 lbs
GLO 304-I-P
5/16”
5/8”
1”
1-5/8”
9,460 lbs
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
GLO 305
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
GLO 305-I
GLO 305-P
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
GLO 305-I-P
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
GLO 306
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
GLO 306-I
GLO 306-P
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
GLO 306-I-P
Gloma Halyard Key Pin Shackles with Fixed Pin
Gloma High Resistance Bow Shackles ▪▪Specially treated to obtain a higher work load. Made in 17-4 Ph ▪▪Sold by the each, bulk or packaged (P) Pin Dia.
Inside Width
Inside Bow
Inside Length
Break Load
GLO 304-HR
5/16”
5/8”
1”
1-5/8”
10,340 lbs
GLO 304-HR-P
5/16”
5/8”
1”
1-5/8”
10,340 lbs
GLO 305-HR
3/8”
13/16”
1-3/16”
1-15/16”
16,500 lbs
GLO 305-HR-P
3/8”
13/16”
1-3/16”
1-15/16”
16,500 lbs
Part #
Sailing
Pin Dia.
Part #
▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Pin Dia.
Inside Width
Pin to Pin
Eye
Break Load
GLO 823-B1
3/16”
1/2”
13/16”
5/8”
1,980 lbs
GLO 823-B1-P
3/16”
1/2”
13/16”
5/8”
1,980 lbs
GLO 823-B2
1/4”
9/16”
7/8”
1-1/16”
2,860 lbs
GLO 823-B2-P
1/4”
9/16”
7/8”
1-1/16”
2,860 lbs
GLO 823-B3
5/16”
3/4”
1-3/16”
1”
5,500 lbs
GLO 823-B3-P
5/16”
3/4”
1-3/16”
1”
5,500 lbs
Part #
Gloma Key Pin Shackles ▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Pin Dia.
Inside Width
Inside Length
Break Load
GLO 823-1
3/16”
1/2”
1-1/2”
2,420 lbs
GLO 823-1-P
3/16”
1/2”
1-1/2”
2,420 lbs
GLO 823-2
1/4”
9/16”
1-9/16”
3,080 lbs
GLO 823-2-P
1/4”
9/16”
1-9/16”
3,080 lbs
GLO 823-3
5/16”
13/16”
2-3/8”
5,720 lbs
GLO 823-3-P
5/16”
13/16”
2-3/8”
5,720 lbs
Part #
Gloma
299
Gloma Snap Shackles with Ring ▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Length
Eye Dia.
Break Load
GLO 1101
Part #
2-5/8”
7/16”
2,200 lbs
GLO 1101-P
2-5/8”
7/16”
2,200 lbs
GLO 1102
3-5/8”
9/16”
3,300 lbs
GLO 1102-P
3-5/8”
9/16”
3,300 lbs
Gloma Eye Straps ▪▪Forged 316 stainless steel ▪▪Sold by the each, bulk or packaged (P) Part #
Inside Width
Inside Height
Hole Size
GLO 702
3/8”
1/2”
3/16”
GLO 702-P
3/8”
1/2”
3/16”
GLO 703
1/2”
9/16”
1/4”
GLO 703-P
1/2”
9/16”
1/4”
GLO 704
5/8”
3/4”
5/16”
GLO 704-P
5/8”
3/4”
5/16”
Gloma Webbing Eye Straps ▪▪Forged 316 stainless steel ▪▪Sold by the each, packaged Part #
Inside Width
Hole Size
GLO 901-P
30 mm
5,6
GLO 902-P
40 mm
5,6
► Also See
Gloma Anchor Swivel pg 195
Sailing
300
Harken
Harken forged stainless shackles. Now the high quality shackles which have been used on Harken blocks are available separately, in a large range of configurations and sizes. These shackles are electric forged out of 316 stainless steel and polished to a high lustre. Safe working loads are no more than half the minimum breaking strength.
Harken D Shackles (316 Stainless) Part #
Size
Shackle Pin
A
B
SWL
Breaking Strength
HAR 2108
6mm
1/4”
3/4”
9/16”
1,650 lbs
3,300 lbs
HAR 2115
8mm
5/16”
1”
11/16”
3,040 lbs
6,080 lbs
HAR 2122
10mm
13/32”
1-1/4”
13/16”
4,870 lbs
9,740 lbs
HAR 2123
10mm
13/32”
1-1/4”
13/16”
8,210 lbs
16,420 lbs
HAR 2126
12mm
1/2”
1-1/2”
15/16”
7,120 lbs
14,240 lbs
Harken Bow Shackles (316 Stainless) Part #
Size
Shackle Pin
HAR 2103
5mm
3/16”
HAR 2110
6mm
1/4”
A
B
C
SWL
Breaking Strength
1”
3/8”
11/16”
1,190 lbs
2,380 lbs
1-1/16”
9/16”
3/4”
1,650 lbs
3,300 lbs
HAR 2117
8mm
5/16”
1-1/2”
11/16”
1-1/8”
3,040 lbs
6,080 lbs
HAR 2124
10mm
13/32”
1-7/8”
7/8”
1-1/4”
4,870 lbs
9,740 lbs
Harken Shallow Bow Shackles (316 Stainless) Size
Shackle Pin
A
B
C
SWL
Breaking Strength
HAR 2131
Part #
4mm
5/32”
5/8”
5/16”
7/16”
810 lbs
1,620 lbs
HAR 2132
5mm
3/16”
11/16”
7/16”
9/16”
1,190 lbs
2,380 lbs
Harken Long Shackles (316 Stainless) Part #
Size
Shackle Pin
A
B
SWL
Breaking Strength
HAR 2104
5mm
3/16"
1-1/2"
3/8"
1,190 lbs
2,380 lbs
HAR 2111
6mm
1/4”
1-3/4”
1/2”
1,650 lbs
3,300 lbs
HAR 2118
8mm
5/16”
2-1/4”
5/8”
3,040 lbs
6,080 lbs
Harken Large Opening Shackles (316 Stainless) Part #
Sailing
HAR 2106
Size
Shackle Pin
A
B
SWL
Breaking Strength
5mm
3/16”
1-5/16”
13/16”
770 lbs
2,200 lbs
Harken Folding Pad Eyes For applications serving as temporary or permanent attachment points for blocks, lashings, and tie downs. These hinged fittings are ready when you need to attach a snatch block or fender, but fold flat onto the deck, keeping it clear and protecting your toes when you don’t. A vulcanized thermoplastic pad prevents rattling and vibration. ▪▪ Investment-cast bolt-down bases and forged D-rings are 316 stainless steel Part #
A
B
HAR 3206
1”
1-5/8"
HAR 3207
1-7/8"
1-5/8"
C
D
E
F
Max WL
Max Breaking
7/8"
-
19/32"
1-1/8"
1,760 lbs
3,250 lbs
1-1/8"
15/16"
19/32"
1-1/8"
3,080 lbs
2,800 lbs 3206
3207
301
Harken Harken Twist Shackles (316 Stainless) Part #
Size
Shackle Pin
A
B
SWL
Breaking Strength
HAR 2105
5mm
3/16”
1-7/16”
3/8”
1,190 lbs
2,380 lbs
HAR 2112
6mm
1/4”
1-1/8”
1/2”
1,650 lbs
3,300 lbs
HAR 2119
8mm
5/16”
1-5/8”
11/16”
3,040 lbs
6,080 lbs
HAR 2125
10mm
13/32”
1-7/8”
3/4”
4,870 lbs
9,740 lbs
Harken Captive Halyard Shackles (316 Stainless) Part #
HAR 2107
Size
Shackle Pin
A
B
SWL
Breaking Strength
5mm
3/16"
1-3/8"
9/16"
1190 lbs
2,380 lbs
Harken Stainless Steel Shackles (316 Stainless) Part #
Shackle Pin
A
B
SWL
Breaking Strength
HAR 072
3/16"
1/2"
7/16"
1,250 lbs
2,500 lbs
HAR 138
1/4"
11/16"
5/8"
1,500 lbs
3,000 lbs
HAR 246
5/32"
7/16"
3/8"
600 lbs
1,200 lbs
HAR 1584
5/16"
3-1/16"
1,800 lbs
3,600 lbs
HAR 093
3/16"
1/2"
1,250 lbs
2,500 lbs
Stamped Shackles
072/138/246
Snap Shackles
-
1584
U-Adapters
7/16"
093
Harken Eye Straps (316 Stainless) Part #
HAR 2133
A
B
C
D
E
1-3/16”
3/4”
1-1/2”
3/8”
F
9/16”
Fastener
Breaking Strength
#10
2,500 lbs
3/8”
Harken Eye Straps (316 Stainless)
073/201/445
Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points and can be used for fairleads. Part #
A
B
C
D
E
F
074
Fastener
Breaking Strength
1-11/16”
1/2”
1-1/4”
7/16”
3/8”
7/16”
#10
1,600 lbs
HAR 074
3-1/4”
3/4”
1-1/2”
5/8”
5/8”
9/16”
1/4”
4,000 lbs
HAR 201
1-7/8"
3/8"
1-1/2"
9/16"
1/4"
7/16"
#10
1,600 lbs
HAR 445
1-1/2"
3/8"
1-1/16"
7/16"
3/8"
7/16"
#8
1,000 lbs
Sailing
HAR 073
Harken Pad Eyes (316 Stainless) Pad eyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks, and hundreds of other items. The diamond shaped padeyes are 316 stainless and are often used at mast bases where the diamond shape allows them to be mounted very close together. Part #
A
B
C
D
E
F
G
Max SWL
Max Breaking
HAR 688
3-1/8"
2"
2-3/8"
1-1/4"
1-3/16"
9/16"
7/8"
5,000 lbs
10,000 lbs
HAR 689
3-7/8"
2-5/16"
2-7/8"
1-3/8"
1-9/16"
7/8"
1-1/16"
8,000 lbs
17,200 lbs
302
Harken
Lead Rings
LEAD RINGS
Q&A
Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061T6 aluminum for a smooth, slippery surface. With no moving parts, wear is minimal.
I’M THINKING OF USING HARKEN LEAD RINGS TO ADJUST MY VANG. WHAT ARE YOUR THOUGHTS?
Lead Rings come in five sizes with 8, 10, 14, 20, and 28 mm holes.
Part No. 3269 3270 3271 3272 3273
Center hole Ø in mm 5 /16 8 7/16 10 9/16 14 7/8 20 11/8 28
Description Lead ring Lead ring Lead ring Lead ring Lead ring
3270
3271
Sailing
3269
Outer groove width in mm 3 /16 5 1/4 6 7/16 10 9/16 14 7/8 20
Bleizig 2, Pogo 30, Pogo Structures, Finot-Conq design, 9.14 m (30') — Pogo Structures photo
106
Weight oz .093 .155 .414 1.34 3.70
g 2.65 4.40 11.75 37.85 105
3272
Harken Lead Rings should only be used for applications with high static loads, where trimming angles aren’t acute, or where only minor adjustments are needed. They will definitely save you weight in your vang system, but you’ll be adding friction to the line compared to freerunning ball bearing blocks.
3273
303
Harken NEW
Jib Leads & Fairleads Bolt-Down Fairleads
Harken Bolt-Down Fairleads are used as shallow-angle line deflectors on boats 6 to 15 m (20 to 50 ft). These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.
A
Bolt-Down Fairleads are available in single, double, and triple configurations with 12 or 16 mm hole sizes.
Grand Prix Jib Leads
TECH TIP
Fastener spacing
Hex-head bolts are ideal for oneperson through-deck fastening as the hexagonal head is held securely by the sides of the inset when being tightened.
Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop can be spliced to attach the hobble. This temporarily secures the jib/genoa clew to free-up a winch for mark roundings.
3275
3274
3276
3277
3278
3279
Part No.
Description
Length in mm
Width in mm
Height in mm
Max line Ø in mm
/ / 11/16 7/8 7 /8 7/8
11/8 11/8 11/8 11/4 11/4 11/4
/ / 3/8 9/16 9 /16 9/16
Weight oz g
Fasteners* in mm
A mm
Maximum working load lb kg
Breaking load lb kg
/ / 1/4 5/16 5 /16 5/16
32.0 57.4 82.8 37.0 67.5 98.0
2000 2000 2000 4000 4000 4000
4000 4000 4000 8000 8000 8000
Bolt-Down Fairlead 3274 3275 3276 3277 3278 3279
Single/12 mm hole Double/12 mm hole Triple/12 mm hole Single/16 mm hole Double/16 mm hole Triple/16 mm hole
17/8 27/8 37/8 23/8 39/16 43/4
48 74 99 60 91 121
11 16 11 16
18 18 18 22 22 22
28.2 28.2 28.2 31.8 31.8 31.8
3 8 3 8
10 10 10 14 14 14
.99 1.73 2.43 1.66 2.82 3.95
28 49 69 47 80 112
1 4 1 4
6 6 6 8 8 8
908 908 908 1816 1816 1816
1816 1816 1816 3632 3632 3632
Jib lead 7/8 3280 Midrange 215/16 75 125 11/8 3281 Big Boat 415/16 *HH, SH, CH in 6 mm, 5/16" and 8 mm. Size 1/4" in SH only.
1/2 1/4 22 17/16 37 12 2.97 84 6 55.0 1500 680 3000 1360 7/8 7/16** 29 25/16 58 22 9.72 276 10*** 96.0 4250 1930 8500 3860 **7/16" in HH and SH. ***10 mm in HH, SH and CH. DO NOT use Harken equipment for human suspension.
107
Sailing
3280 3281
J/70 — J/Boats Inc. photo
304
Harken
Loading Formulas Block Loading vs Angle of Deflection
Load on a block is a combination of the load on the line passing through the block, plus a block-loading factor, which is determined by the angle by which the block turns the sheet. For example, a footblock that turns a sheet 180-degrees will see a load equal to twice the load on the sheet. A deck organizer, which turns a halyard only 30-degrees, will see just 52 percent of the load on the halyard.
Boat Type
Most load formulas assume a medium displacement monohull, but you can easily correct for other boat types. Multihulls and boats with canting keels or water ballast have great form stability and speed and will often carry sails very high in the apparent wind speed, so calculations must be done with this wind speed in mind. ULDBs are typically tender and often change sails or reef quite early, so loading may be done at relatively low wind speeds. For example, a modern trimaran may carry its blade jib in 25 knots of wind at speeds over 15 knots for an apparent wind of nearly 40 knots, whereas a ULDB will probably remove its #1 genoa at about 15 knots of apparent wind.
Angle of deflection 30° 45° 60° 75°
Load factor 52% 76% 100% 122%
Angle of deflection 90° 105° 120° 135°
Load factor 141% 159% 173% 185%
Angle of deflection 150° 160° 180°
Load factor 193% 197% 200%
Genoa System Loading
Because wind speed is squared, it is the most important variable and can greatly influence loading. Wind speed (the apparent wind) should be calculated for the specific sail being analyzed. For example, the #1 genoa on a 25 ft (7 m) boat might only be carried in 15 knots of wind while the #3 blade on a Maxi-boat could well be carried in 40 knots. To calculate loading on a genoa lead car, multiply sheet load by the load factor of the sheet. Most #1 genoas will deflect about 45-degrees, while a #3 genoa may deflect 75-degrees or more.
Genoa Sheet Load English Metric SL = SA x V2 x 0.00431 SL = SA x V2 x 0.02104 SL Sheet load in pounds SL Sheet load in kilograms SA Sail area in square feet SA Sail area in square meters V Wind speed in knots V Wind speed in knots
Lead car adjuster tackle load is dependent on the angle of deflection of the sheet in the lead car, but is generally assumed to be .3 of lead car load when deflection is 45-degrees and .5 of lead car load when deflection is 60-degrees.
Mainsheet System Loading
The formula for mainsheet loading is not as widely accepted as that for genoa sheet loads and should only be used as a rough guide for offshore boats from 30 ft to 60 ft (9 m to 18 m). Traveler car adjuster load is generally considered to be .2 times car load.
.2 x Car Load
.5 x Car Load
.3 x Car Load
Mainsheet Load English Metric ML = E2 x P2 x 0.02104 x V2 ML = E2 x P2 x 0.00431 x V2 ( P2 + E2) x (E - X) ( P2 + E2) x (E - X) ML Mainsheet load in pounds ML Mainsheet load in kilograms E Foot length of main in feet E Foot length of main in meters P Luff length of main in feet P Luff length of main in meters V Wind speed in knots V Wind speed in knots Distance from aft end of boom to Distance from aft end of boom to X X mainsheet attachment point in feet mainsheet attachment point in meters
Sailing
Rig Dimensions
The following abbreviations are often used to describe various measurements on a sailboat. Precise technical definitions exist for each abbreviation, but the following is a list of simple descriptions: LOA Length Overall - overall tip-to-tip length of the boat
I2
LWL Length Waterline - length of waterline of the boat
J
Design Waterline - theoretical waterline length of boat as opposed to LWL, which is actual waterline length BMX Beam Maximum - width of the boat at the widest point BWL Beam Waterline - widest beam of boat at the waterline I Height of the foretriangle measured from the top of the highest sheave to the sheerline
DWL
28
Height of staysail halyard above deck Base of the foretriangle measured from the front of the mast to the intersection of the forestay and deck
J2
Base of staysail triangle
P E
Luff length of the mainsail Foot length of the mainsail
LP
Shortest distance from headstay to the clew of the jib
P I
E
J
2
J
I 2
Harken
U
Photo ©
m Sperr
g Tea S Sailin
ide
y Top-S
k
ingpix.d
on / sail
Anders r / Mick
www.harken.com/T2-Ratchamatic MADE IN USA
306
Harken
NEW
2161
T2 Soft-Attach Blocks
Harken offers these patent-pending, high-strength, soft-attach blocks in 18 to 57 mm sizes. The 18 mm block features stainless steel ball bearings and an integrated stainless inner race and rivet for optimal strength-to-weight. The 29, 40, and 57 mm blocks feature composite sheaves that spin freely on Delrin® ball bearings with curved bearing races. They have no metal shackles or rivets, making them the lightest soft-attach blocks Harken has ever designed.
2161
All T2 blocks are lashed or spliced through the loadbearing center of the block, decreasing the loads on the sideplates and acting as a safety backup for the system. Use for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small lightweight blocks are called for.
2698
T2 block with open center Line ties, splices, or lashes to almost anything: cascades, bridles, traveler controls.
2146 2149 2152 T2 Loop block with anchor post Loops deadend on anchor post for easy installation. No knots or splices needed.
2158
T2 Loop Blocks
The T2 Loop block's on/off loop system slides through the block head and over the anchor post for a secure connection. A SK75 Dyneema® loop is included. Replacement loops available.
T2 Blocks
T2 blocks come in single and double configurations and can be tied, spliced, or lashed to almost anything. T2 doubles feature composite line guides that are integrated into the block head. They keep the block aligned correctly by pushing the lashing line to the outer edges of the block's head.
2148 2151 2147 2150 2153
A length of Spectra® line with a polyester cover is included.
Slide the loop through the head and over the anchor post for a secure connection.
Use the 2161 “tight cinching” 18 mm in applications where the block needs to be secured extremely close to the deck.
Sailing
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Dyneema is a registered trademark of DSM Dyneema. Spectra is a registered trademark of Honeywell International, Inc. Sheave Ø
Part No.
Description
2698 2146 2149 2152 2161 2158 2147 2150 2153
Length
Weight
Max line Ø in mm
Maximum working load lb kg
in
mm
in
mm
oz
g
Single Single
23/32 11/8
18 29
11/8 111/16
28
.25 0.4
7.2 12
3 16
/ 5/16
5 8
275 330
Single Single Single Double Double Double Double
19/16 21/4 23/32 23/32 11/8 19/16 21/4
40 57 18 18 29 40 57
21/4 31/16 11/8 11/8 111/16 21/4 31/16
57 79
0.9 2 .25 0.6 .83 1.7 3.8
25 57 7.2 17 23.5 48 107.5
/ / 3/16 3/16 5/16 3/8 7/16
10 11 5 5 8 10 11
26 59
7 16
/8 /
10 11
Breaking load lb
kg
125 150
992 1000
450 454
485 792 275 450 600 700 1080
220 359 125 204 272 317 490
1200 2380 992 1500 1900 2100 3200
544 1080 450 680 861 952 1451
485 792
220 359
1200 2380
544 1080
T2 43
28 28 43 57 79
3 8
7 16
T2 Loop 2148 Single* 2151 Single** *Includes 2154 loop.
40
19/16 40 21/4 57 0.9 57 31/16 79 2 21/4 **Includes 2155 loop. Replacement loops see page 105.
3
307
Harken NEW
Carbo T2 Soft-Attach Ratchamatic
The patent-pending T2 Ratchamatic is Harken’s newest block to feature the T2 line’s styling and soft-attachment system. The weight of this high-strength block is only a few ounces. This is thanks to composite fiber-reinforced sideplates, hardcoat-anodized aluminum sheave, a lightweight soft-attach, and a minimum of moving parts in the ratcheting mechanism. All T2 blocks are lashed or spliced through the load-bearing center of the block, decreasing the loads on the sideplates and acting as a safety backup for the system. Lashing allows ratchet adjustment close to the deck. Splicing with a large diameter line uses the tail to fasten the block at the height needed for a fair lead. Pressure on the line engages the ratchet mechanism, which switches seamlessly from free-running to ratchet mode. Unloaded main and jib sheets run out freely during mark roundings, and asymmetrical spinnaker sheets free instantly during jibes. T2 Ratchamatic blocks are clearly labeled with high-contrast directional markers for correct reeving and trimming direction.
Pressure on the line reeved through the center engages the ratchet mechanism.
Use for mainsheet and spinnaker systems on beachcats, dinghies, and sportboats. A length of Spectra® line with a polyester cover is included. Spectra is a registered trademark of Honeywell International, Inc.
2160
2159
Sailing
Lashing secures the block close to the deck and keeps the block from capsizing.
Finn © US Sailing Team Sperry Top-Sider/Mick Anderson photo
Part No. Description
Sheave Ø in mm
Length in mm
Weight oz
g
Max line Ø in mm
Maximum working load lb kg
Breaking load lb
kg
Holding power w/180° wrap 50 lb (23 kg)
40 mm 2159 Single
19/16
40
21/4
57
.90
25
3 8
/
10
300
136
1000
454
10:1
21/4
57
31/16
79
2.5
71
3 8
/
10
500
227
2000
907
10:1
57 mm 2160 Single
41
308
Harken
29 mm Blocks
342
341
340
The compact 29 mm Carbo block is extremely strong. Use as a mainsheet block on small dinghies such as the Optimist, or for low-friction control blocks on any size boat. Doubles and triples feature U-Locks to hold the swivel in front/side position, or to let it spin freely. The triple’s compact cam arm supports high-load purchases of 5:1 or 6:1. The line-shedding cheek block features a small mounting footprint and drain holes. 343
High-strength pivoting lead blocks with cams are used for halyard controls on larger keelboats and as “headknockers” on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as Classic models, making upgrades easy. Cam reverses for either up or down cleating. Use for: Outhauls Cunninghams Vangs Traveler controls Barberhaulers Flag halyards
345
344
347
346
353 349
30 mm 13/16"
352
350
The double and triple swivel blocks can lock in two directions or swivel.
Use as becket block without the additional height of a becket.
348
32 mm 11/4"
371
381
395
396
Sailing
Cam cleats reverse for up or down engagement/disengagement.
42
Sheave Weight Shackle pin Ø Length w/shackle Ø Part No. Description in mm in mm oz g in mm 5 29 25/8 66 0.9 26 /32 4 340 Single/swivel 11/8 5/32 29 31/16 78 1.0 28 4 341 Single/swivel/becket 11/8 3/16 29 27/8 73 1.8 51 5 342 Double/swivel 11/8 3/16 29 33/8 85 1.9 54 5 343 Double/swivel/becket 11/8 3/16 344 Triple/swivel 11/8 29 27/8 73 2.6 74 5 3/16 29 33/8 85 2.7 77 5 345 Triple/swivel/becket 11/8 3/16 29 27/8 73 4.6 130 5 346 Triple/471 Carbo-Cam** 11/8 3/16 347 Triple/471 Carbo-Cam/becket** 11/8 29 33/8 85 4.7 133 5 29 115/16 49 0.8 23 — — 348 Single/fixed* 11/8 29 23/16 56 1.1 31 — — 349 Stand-up/fixed* 11/8 350 Cheek 11/8 29 21/8 53 0.6 17 — — 29 21/16 52 0.9 26 — — 352 90° fixed head* 11/8 29 35/8 92 1.2 34 — — 353 Traveler 11/8 29 47/8 124 1.8 51 — — 371 Clew block assembly 11/8 29 21/8 54 1.2 34 — — 381 Double/fixed 11/8 29 315/16 100 3.2 90.7 — — 395 Pivoting lead block/468 Cam-Matic** 11/8 29 315/16 100 2.96 83.7 — — 396 Pivoting lead block/471 Carbo-Cam** 11/8 *Can be used as becket block. **Maximum working loads and breaking loads for blocks based on cam strengths.
Max line Ø in mm 5 /16 8 5/16 8 5/16 8 5/16 8 5/16 8 5/16 8 1/4 6 1/4 6 5/16 8 5/16 8 5/16 8 5/16 8 5/16 8 5/16 8 5/16 8 1/4 6 1/4 6
Maximum working load lb kg 330 150 330 150 660 299 660 299 990 449 990 449 750 340 900 408 330 150 330 150 330 150 330 150 330 150 330 150 660 299 200 91 150 68
Breaking load lb kg 1000 454 1000 454 1625 737 1625 737 2000 907 2000 907 1500 680 1800 816 1000 454 1000 454 1000 454 1000 454 1000 454 1000 454 1625 737 650 295 650 295
309
Harken
40 mm Carbo®
Carbo® AirBlocks® are 60% stronger and 30% lighter than our Classic blocks. Use the 40 mm Carbo for jib and mainsheet systems on high-performance dinghies and for loaded control lines on small keelboats. The nylon-resin sideplates are densely packed with long-glass fibers for a compact block with a high strength-to-weight ratio. Sheaves spin on high-load ball bearings with fitted races for low-friction operation. Ball bearings, sheave, and sideplates are UV-stabilized for maximum protection.
Reversible cam arms
High-strength pivoting lead blocks with cams are used for halyard controls on larger keelboats and as “head knockers” on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as Classic models, making upgrades easy. Cam reverses for either up or down cleating. Use for: Main/jib sheets Mainsheet fine-tune Control lines Vangs Cunninghams Outhauls
11/2" 38 mm
2636
2637 Use as becket block without the additional height of a becket.
2644
2649
2645
2646
2652
2650
2659
Part No. 2636 2637 2644 2645 2646 2649 2650 2652 2659
Description Single/swivel Single/swivel/becket Cheek Single/swivel/471 Carbo®-Cam®** Single/swivel/471 Carbo®-Cam®/becket** Traveler Single/fixed* Stand-up/fixed* 90° Fixed head*
*Can be used as becket block
Sheave Ø in mm 40 19/16 40 19/16 19/16 40 19/16 40 19/16 40 40 19/16 40 19/16 40 19/16 40 19/16
Length in mm 33/8 86 4 102 23/4 70 33/8 86 4 102 41/4 108 21/2 64 23/4 70 215/16 75
Weight w/shackle oz g 1.6 44 1.7 48 1.2 34 4.2 119 4.3 122 1.8 52 1.4 40 1.7 48 1.6 44
Shackle pin Ø in mm 5/32 4 5/32 4 — — 5/32 4 5 /32 4 — — — — — — — —
**Maximum working loads and breaking loads for blocks based on cam strengths
Max line Ø in mm 3/8 10 3/8 10 3 /8 10 1/4 6 1 /4 6 5/16 8 3/8 10 3/8 10 3/8 10
Maximum working load lb kg 485 220 485 220 485 220 150 68 300 136 330 150 485 220 485 220 485 220
Sailing
Actual Size
11/4" 32 mm
Breaking load lb kg 1620 735 1620 735 1620 735 300 136 600 272 1000 454 1620 735 1620 735 1620 735
41
310
Harken
40 mm Blocks 2156
2640
2638
2157
2641
2642
2639
2643
2647
2648
2654
Sailing
Optimistic, X.O., 7.5 m, Chantier des Ileaux — Jérémie Govin photo
44
Sheave Weight Shackle pin Ø Length w/shackle Ø Part No. Description in mm in mm oz g in mm 40 41/2 112 6.6 186 — — 2156 Pivoting lead block/150 Cam-Matic* ** 19/16 40 41/2 112 5.5 157 — — 2157 Pivoting lead block/365 Carbo-Cam* ** 19/16 3 2638 Double/swivel 19/16 40 311/16 94 3.2 86 /16 5 3/16 2639 Double/swivel/becket 19/16 40 45/16 110 3.4 90 5 3/16 40 311/16 94 4.6 118 5 2640 Triple/swivel 19/16 3/16 40 45/16 110 4.7 122 5 2641 Triple/swivel/becket 19/16 3/16 40 31/2 89 2.8 80 5 2642 Double/fixed 19/16 3/16 40 43/16 106 2.9 84 5 2643 Double/fixed/becket 19/16 3/16 40 311/16 94 8.2 232 5 2647 Triple/swivel/471 Carbo-Cam** 19/16 3 40 45/16 110 8.3 235 /16 5 2648 Triple/swivel/471 Carbo-Cam/becket** 19/16 3/16 40 311/16 94 6 170 5 2654 Quad/swivel 19/16 *Can be used as becket block. **Maximum working loads and breaking loads for blocks based on cam strengths.
Max line Ø in mm 3/8 10 3/8 10 3 /8 10 3/8 10 3/8 10 3/8 10 3/8 10 3/8 10 1/4 6 1 /4 6 3/8 10
Maximum working load lb kg 300 136 200 91 970 440 970 440 1455 660 1455 660 970 440 970 440 750 340 900 408 1455 660
Breaking load lb kg 950 430 950 430 2380 1080 2380 1080 3050 1383 3050 1383 2380 1080 2380 1080 1500 680 1800 816 3050 1383
311
Harken Harken 57 mm & 75 mm Carbo Blocks The nylon resin side plates are densely packed with long-glass fibres for a compact block with a high strength-to-weight ratio. Ball bearings, sheave and side plates UV stabilized with black additive for maximum protection. Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to keep line from twisting. The high-load 57mm Carbo has a broad working range. Use for main and jib sheets on centreboard and keelboats like Lightnings, Dragons, Solings, J/24s and for mainsheet systems on catamarans.
▪▪Use for: ▪▪Main/jib sheets ▪▪Mainsheet fine-tune ▪▪Control lines ▪▪Vangs ▪▪Cunninghams ▪▪Outhauls
2617
2616 2600
2602
2604
2606
2621
2601
Part #
2603
Description
2618
2615
2605
Length
2622
Max. Line
Max Working Load lbs
Breaking Load lbs
HAR 2600
57mm/Single/Swivel
4-5/16”
7/16”
792
2380
HAR 2601
57mm/Single/Swivel/Becket
5-3/16”
7/16”
792
2380
HAR 2606
57mm/Cheek
3-5/8”
7/16”
792
2380
HAR 2615
57mm/Single/Swivel/150 Carbo-Cam**
4-5/16”
7/16”
136
750
HAR 2616
57mm/Single/Swivel/Becket/150 Carbo-Cam**
5-3/16”
7/16”
600
1500
HAR 2602
57mm/Double/Swivel
4-3/4”
7/16”
1584
3300
HAR 2603
57mm/Double/Swivel/Becket
5-5/8”
7/16”
1584
3300
HAR 2604
57mm/Triple/Swivel
4-3/4”
7/16”
2380
5000
HAR 2605
57mm/Triple/Swivel/Becket
5-5/8”
7/16”
2380
5000
HAR 2617
57mm/Triple/Swivel/150 Carbo-Cam**
4-3/4”
7/16”
1500
3750
HAR 2618
57mm/Triple/Swivel/Becket/150 Carbo-Cam**
5-5/8”
7/16”
1800
4500
HAR 2621
57mm/Carbo Fiddle Block
6”
7/16”
792
2380
HAR 2622
57mm/Carbo Fiddle Block w/Becket
6-7/8”
7/16”
792
2380
57mm/Carbo Fiddle Block w/Cam
6”
7/16”
792
2380
HAR 2624
57mm/Carbo Fiddle Block w/Cam, Becket
6-7/8”
7/16”
792
2380
HAR 2673
75mm/Ratchet
4-5/8"
3/16"
793
2380
HAR 2674
75mm/Ratchet/Becket
5-5/8"
3/16"
793
2380
HAR 2675
75mm/Ratchet/150 Cam-Matic
4-5/8"
3/16"
793
2380
HAR 2676
75mm/Ratchet/150 Cam-Matic/Becket
5-5/8"
3/16"
793
2380
HAR 2690
75mm
6-3/16"
1/4"
550
3637
HAR 2691
75mm/Becket
7-7/16"
1/4"
550
3637
HAR 2692
75mm/150 Cam-Matic**
6-3/16"
1/4"
550
3637
HAR 2693
75mm/150 Cam-Matic/Becket**
7-7/16"
1/4"
550
3637
HAR 2697
75mm/Ratchet/150 Cam-Matic/Becket**
7-7/16"
1/4"
550
3637
2673
2624
2674
2675 2676/2697
Sailing
HAR 2623
2623
2690 2691
**Safe working loads and breaking strengths are based on cam strengths 2692
2693
312
Harken
Harken 75 mm Carbo Blocks The nylon resin side plates are densely packed with long-glass fibres for a compact block with a high strength-to-weight ratio. Ball bearings, sheave and side plates UV stabilized with black additive for maximum protection. Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to keep line from twisting.
Curved bearing race fit ball for more ball-to-race contact. Disperses load for higher strength, smaller block Designed with high-tech, long glass fibres and nylon material for higher strength to weight ratio. Eliminates heavy stainless sideplates
The 75 mm Carbo has a safe working load of 1200 lbs (500 kg). It releases easily under load and is perfect for mainsheet systems on sport boats like the Melges 24, J/105 and Henderson 30. ▪▪Use for: ▪▪Main/jib sheets ▪▪Mainsheet fine-tune ▪▪Control lines ▪▪Vangs ▪▪Cunninghams ▪▪Outhauls
2661
2662
2663
Description
Length
Max. Line
SWL lbs
Breaking Strength lbs
HAR 2660
Carbo Single
5-3/8”
9/16”
1213
3638
HAR 2661
Carbo Single w/Becket
6-1/2”
9/16”
1213
3638
Part #
HAR 2662
Carbo Double
6”
9/16”
2426
6000
HAR 2663
Carbo Double w/Becket
7”
9/16”
2426
6000
HAR 2664
Carbo Triple
6”
9/16”
3639
10000
HAR 2665
Carbo Triple/Becket
7”
9/16”
3639
10000
HAR 2668
Carbo Triple w/Cam**
6”
1/2”
1500
3750
HAR 2669
Carbo Triple w/Cam & Becket**
7”
1/2”
1800
4500
**Safe working loads and breaking strengths are based on cam strengths
Sailing
2660
2664
2665
2668
2669
313
Harken Harken 40 mm Carbo Ratchets
▪▪Jib/spinnaker sheets Mainsheet 2:1 foreguy Mainsheet fine-tune Traveler control Genoa lead
These small ratchets are ideal for jib sheets and spinnakers on small dinghies where size and weight are critical. Eightfaceted machined aluminum sheave holds line securely. Hardkote anodizing provides durability. 2608, 2609 and 2614 have on/off switch; others are in constant ratchet mode. 2608
2609
Description
Length
Max. Line
SWL lbs
Breaking Strength lbs
HAR 2608
Ratchet Block
3-3/8”
3/8””
300
1000
HAR 2609
Ratchet Block w/Becket
4”
3/8”
300
1000
HAR 2610
Ratchet Block w/Cam**
3-3/8”
1/4”
150
300
HAR 2611
Ratchet w/Cam & Becket**
4”
1/4”
300
600
HAR 2612
Triple Ratchet w/Cam**
3-11/16”
3/16”
750
1500
HAR 2614
Ratchet Cheek Block
2-3/4”
3/8”
300
1000
Part #
2610 2611
2612
2614
**Safe working loads and breaking strengths are based on cam strengths
Harken 57 mm & 75 mm Carbo Ratchets
▪▪Main/jib sheets Spinnaker sheets Traveler controls Foreguys
Hand hold loaded lines and control release using 57 and 75 mm Carbo Ratchets. Machined aluminum sheaves have eight facets to hold line securely. The 75 mm provides up to 15:1 holding power and the 57 mm 10:1.
2135
Choose switchable ratchets for on/off control. For the ultimate system mount a switchable ratchet in the cockpit and a boommounted Ratchamatic directly above to allow double holding power in heavy air and to ensure the mainsheet runs freely in light air.
2136
Description
Length
Max. Line
SWL lbs
Breaking Strength lbs
HAR 2135
57mm Carbo Ratchet
4-1/16”
3/16”
500
2000
HAR 2136
57mm Carbo Ratchet w/Becket
4-15/16”
3/16”
500
2000
HAR 2140
57mm Carbo Triple Ratchet w/Cam
4-1/16”
3/8”
1500**
3750
HAR 2670
75mm Carbo Ratchet
5-3/8”
1/4”
750
3000
HAR 2671
75mm Carbo Ratchet
6-1/2”
1/4”
750
3000
HAR 2672
75mm Cheek
4-1/16”
-
750
3000
Part #
2140
2670
2671
2672
**Safe working loads and breaking strengths are based on cam strengths
Sailing
Ask for a Harken Catalogue
314
Harken
Harken Carbo Ratchamatic The Carbo Ratchamatic is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded main and jib sheets run out freely during mark rounding’s and asymmetrical spinnakers free instantly during jibes.
▪▪Main/Jib Sheets ▪▪Asymmetric spinnakers
Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style. The Ratchamatic cheek block mounts on either port or starboard. Holding power of 57 mm is as high as 10:1. The 75 mm up to 15:1. Part #
Description
2625/2680
2626
Length
Max. Line
SWL lbs
Breaking strength lbs
3/8”
500
2000
2627
57mm Blocks
HAR 2625
Ratchamatic
4-1/16”
HAR 2626
Ratchamatic w/Becket
4-15/16”
3/8”
500
2000
HAR 2627
Ratchamatic w/Cam**
4-1/16”
3/8”
300
750
HAR 2629
Triple Ratchamatic w/Cam**
4-1/16”
3/8”
1500
3750
HAR 2630
Triple Ratchamatic w/Cam, Becket**
4-15/16”
3/8”
1800
4500
HAR 2633
Ratchamatic Cheek
3-1/4”
3/8”
500
2000
HAR 2634
Double Ratchamatic Block
4-9/16”
3/8”
750
1875
5-3/8”
7/16”
750
3000
2633
2629
75mm Blocks
HAR 2680
Ratchamatic
2630
**Safe working loads and breaking strengths are based on cam strengths
2634
Harken Cruising ESP Blocks Cruising ESP blocks complement our existing blocks in looks and function, but are simpler in design and construction. Sheaves feature sleeve bearings to handle high static loads and are ideal for halyards or limited purchase systems on cruising boats. Swivels and Fiddles Use cruising ESP swivel and fiddle blocks in winch driven purchases of 4:1 or less. Perfect for vangs or mainsheet systems on cruising boats from 35 ft to 45 ft (10 m to 14 m). Part #
Description
Sheave
Single/swivel
2-1/4”
Length
Shackle Pin
Max. Line
SWL lbs
Breaking strength lbs
5/16”
5/8”
2,500
5,000
6058/6059
57mm Blocks
HAR 6059
5-1/2”
Sailing
75mm Blocks
HAR 6058
Single/swivel
3”
6-1/4”
5/16”
3/4”
3,500
7,000
HAR 6085
Fiddle
3/1-13/16
8-3/8”
5/16”
3/4”
3,500
7,000
6085
315
Harken Harken Cruising ESP Deck Organizers Deck organizers lead halyards and control lines aft, allowing crew to sail from the security of the cockpit. They lead a large number of lines through a small space. Harken deck organizers feature ball bearing sheaves and are available in double, triple, and stacked double and triple configurations. The ESP Deck Organizer features aluminum Hardkote anodized side plates for strength and corrosion resistance. Mount organizers with large fasteners directly through the sheaves. If you need an additional sheave, use the same holes and simply drill another hole to mount the longer organizer. Match Cruising ESP mastbase blocks with organizers for a complete system. 6102 is pre-assembled as a double and shares a common center plate. Part #
HAR 6052
Sheave
Length
Max. Line
MWL lbs
Breaking Load lbs
2-1/4"
6-3/4"
5/8"
4,000
8,000
HAR 6053
2-1/4"
9-15/16"
5/8"
6,000
12,000
HAR 6054
1-9/16"
4-13/16"
1/2"
2,000
4,000
HAR 6055
1-9/16"
7-11/16"
1/2"
3,000
6,000
HAR 6066
1-9/16"
9-5/16"
1/2"
4,000
6,000
6052
6053
6054
6055
6066
Harken Stand Up Bases Ball and Socket Swivel Bases: The ball and socket design allows blocks to swivel freely and pivot to a 45 degree
angle. Bases may be fitted with springs but block won’t hit the deck without them. Select blocks carefully as the maximum working load of either base is often less than corresponding blocks.
Stanchion Mount Base: The 061 stanchion mount base attaches blocks to 7/8 in or 1 in (22 or 25 mm) stanchions or pulpits and is often used to lead furling lines to the cockpit. Allows blocks to swivel and pivot for fairleads. Springs: Springs are used to support blocks on padeyes, eyestraps, bases and traveler cars. Keeps blocks from hitting
the deck.
Stand-up Boots: Made of durable flexible PVC, stand-up boots hold blocks up without snagging lines. The 369 fits 40 mm and 57 mm Carbo and Black Magic blocks. The 370 fits 75 mm Carbo blocks. Description
Height
Base
SWL
Breaking Strength
HAR 010
2.00 Base For 3/8 Swivel
1-3/4”
2-1/8”
400
1300
HAR 061
Stanchion Mount Lead Base
1-1/4”
-
350
-
Part #
010
Description
Height
Dia
HAR 071
Part #
Block Stand Up Spring
2”
7/8”
HAR 097
Stand Up Spring For Bullet
1”
3/4”
HAR 369
Small Stand Up Boot
2”
1-9/16”
HAR 370
Large Stand Up Boot
2-5/8”
2-3/16” 071/097
061
369/370
Sailing
Ask for a Harken Catalogue
316
Harken
Cam Cleat Accessories Micro
297
Standard
Offshore
424 425
145 283 Wedge kits and risers are available to improve cam angles. Underdeck shims are included with angled risers and wedges for easy mounting.
294
293
Lightweight, fiber-reinforced Flairleads feature stainless wearguards for long life and are available in various colors for color-coding cams.
296
295
438 475
Sailing
476
The 438 adapter plate is perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control.
298
375
495
494
424
425
137 281
201
282
Harken Cam Cleat Accessories
88
HAR 137 Large S/S eye strap HAR 145 Cam-matic wedge kit HAR 150KIT 150 rebuild kit HAR 281 Eyestrap for micro cam HAR 282 Eyestrap for 280 offshore cam HAR 283 Offshore cam wedge kit HAR 293 Flat micro cam riser HAR 294 Angled micro cam riser
HAR 295 HAR 296 HAR 297 HAR 298 HAR 375 HAR 424B HAR 424BL HAR 424G
Flat cam matic riser Angled cam matic riser Micro cam wedge kit Cam matic wire fairlead kit Xtreme angle fairlead F/150 cam Micro fairlead - Black Micro fairlead - Blue Micro fairlead - Green
HAR 424R HAR 424Y HAR 425B HAR 425BL HAR 425G HAR 425R HAR 425Y HAR 438
Micro fairlead - Red Micro fairlead - Yellow Fairlead - Black Fairlead - Blue Fairlead - Green Fairlead - Red Fairlead - Yellow Cam cleat adapter plate
317
Harken Harken Ball Bearing Cam-Matic Cleats Easy-Open Ball Bearing Cams Multiple rows of high-load ball bearings reduce friction so cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide line for easy entry. This allows precise sail control without having to readjust the cleated line. The Teflon surface of the aluminum Cam-Matic improves the cleat’s fast line engagement. The Cam-Matic is the only cleat that will engage under maximum line tension.
150
412
365
Protective Tooth Design Rounded teeth hold securely by squeezing rather than cutting into line to reduce wear. High-Wear or Lightweight Models Aluminum Cam-Matics are Hardkoteanodized for high-load, high-wear, continuous adjustment applications. Available in Micro, standard and Offshore sizes. Lightweight fibre-reinforced Carbo-Cams for racing where weight is critical, or where adjustments are less frequent. Available in Micro and standard sizes.
471
468
418
Long-Lasting Protection Ball Bearings and Carbo-Cams UV stabilized with carbon-black additive for maximum protection.
Cam Kit 470
Part #
Description
Max. Min. Line dia
Max Working Load lbs
Breaking Load lbs
Pawls
HAR 150
Cam-Matic
1/2” 1/8”
300
750
Aluminum
HAR 280
Offshore Cam-Matic
5/8” 1/4”
500
1000
Aluminum
HAR 365
Carbo-Cam
3/8” 1/8”
200
500
Plastic carbon matrix
HAR 412
Double Cam-Matic
3/8” 5/16”
500
750
Aluminum
HAR 418
Trigger Cleat
3/16” 1/2”
500
1000
Stainless Steel
HAR 468
Micro Cam-Matic
3/32" 1/4"
200
400
Aluminum
HAR 471
Micro Carbo-Cam
1/8" 1/4"
150
300
Plastic/Carbon
Cam Kits
HAR 470
Cam-matic with X-Treme angle fairlead
468 cam, 476 fairlead
Harken Cam Bases
▪▪Mainsheets ▪▪Jib sheets ▪▪Control lines
Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm. It is ideal for mounting in the cockpit or for use on larger keel boats and small offshore boats that use 3.00 in (76 mm) plastic blocks. The low-profile 205 is used when installation is at deck level and when smaller blocks are used.
144/205
The 216 features a second cleat for lines led vertically through the base of the swivel. It is frequently used to combine vang or backstay controls in the same swivel base that handles the mainsheet. The 240 is a simple swivel base for main and jib sheets on very small boats or for control lines on boats of all sizes.
216 402/403
Description
SWL lbs
Use with
Swivel Base
-
57mm / 75mm / 2.25” / 3.00” / ratchets
HAR 205
Little Swivel Base
-
57mm / big bullet / dinghy / 2.25” / little ratchets
HAR 216
Duo Cam Swivel Base
-
57mm / 2.25” / 3.00” / ratchets
HAR 238
Cam Base w/150 Cam-Matic
-
-
HAR 239
Cam Base w/365 Cam-Cleat
-
-
HAR 240
Bullseye Swivel Base/150 Cam
300
-
HAR 241
Bullseye Swivel Base/365 Cam Cleat
150
-
HAR 402
Small Swivel Base/412 Cam-Matic
-
57mm / 2.25" double ratchets
HAR 403
Small Swivel Base/412 Cam-Matic
-
57mm / 2.25"/3.00" double ratchets
Sailing
Part #
HAR 144
238
240/241
318
Harken
Ordering Traveler Systems 1. Determine System Size
Determine size of traveler system (13, 22, 27, 32, 42, or 64 mm) based on mainsail area, placement on the boom, and mono- or multihull. See Mainsail Traveler System Size Selection chart. Typical boat lengths are listed as a guideline only.
Typical Boat Lengths: 22 mm Small Boat: 6.7–8.5 m (20'–28') 27 mm Midrange: 7.9–10.7 m (26'–35') 32 mm Big Boat: 10.4–12.8 m (34'–46')
Mainsail Traveler System Size Selection Maximum mainsail area Monohulls Multihulls End-boom sheeting Mid-boom sheeting End-boom sheeting Mid-boom sheeting ft2 m2 ft2 m2 ft2 m2 ft2 m2
Cars
Dinghies/Light Daysailers 13 mm Micro CB 22 mm Small Boat CB: low-load 22 mm Small Boat CB: standard 22 mm Small Boat CB: high-load:1250 series 27 mm Midrange CB: standard
110 125 160 200 350
10.2 11.6 14.9 18.6 32.5
85 100 135 160 285
8 9.3 12.5 14.9 26.5
85 100 135 160 275
8 9.3 12.5 14.9 25.5
70 80 110 135 215
6.5 7.5 10.2 12.5 20
150 190 260 300
14 17.5 24 28
125 150 215 240
11.5 14 20 22
135 160 215 240
12.5 14.9 20 22
110 125 160 190
10.2 11.5 14.9 17.5
425 550 575 700 1100 1100 1400
39.5 51 53.4 65 102 102 130
350 450 500 525 900 900 1100
32.5 42 46.5 49 83.6 83.6 102
350 450 500 525 900 900 1100
32.5 42 46.5 49 83.6 83.6 102
300 350 425 450 750 750 900
28 32.5 39.5 42 69.7 69.7 83.6
Small Offshore Boats/Heavy Daysailers 22 mm Small Boat CB: standard 22 mm Small Boat CB: high-load:1250 series 27 mm Midrange CB: standard 27 mm Midrange CB: high-load
Large Offshore Boats 32 mm Big Boat CB: standard 32 mm Big Boat CB: high-load 32 mm Big Boat CB: 2 stand-up toggles/32 mm CRX Roller: 3074 32 mm Big Boat CB: 2 T3201Bs joined by 580 32 mm Big Boat CB: 2 high-load cars coupled 42 mm Mini-Maxi: 3068/32 mm CRX Roller: 3075 64 mm Maxi: 3070
2. Select Track
Select size and length of track (sizes listed by width measurement of top of track in millimeters). Choose low-beam track if it will be supported the entire length. Choose high-beam track for spanning companionways, cockpits, etc.
13 MM MICRO
22 MM SMALL BOAT
/2" 13 mm 3 /8" 9 mm
27 MM MIDRANGE
/" 22 mm 1/2" 12 mm
9/16" 14 mm
/16" (17 mm)
11
2707 /2" 13 mm 1
Sailing
13 /16" 20 mm
2709
R27 1602
373 2720/2751
1" 25 mm
/" 22 mm
11/16" 27 mm
7 8
1" 25 mm
15/8" 42 mm
3/4" 19 mm
R32 3159 13/16" 30 mm
HIGH-BEAM
11/4" 32 mm
R27HB 21/4" 57 mm
R32HB
7/8" 22 mm
108
11/4" 32 mm
2721
11 /16" 17 mm
1" 25 mm
32 MM BIG BOAT
11/16" 27 mm
7 8
1
LOW-BEAM
374 2725
OR 17/32" 31 mm
15/8" 42 mm
319
Harken
Ordering Traveler Systems 3. Select Car & Purchase Requirements
+
Based on system size and purchase requirements, select a car and accessories that match track and load requirements. Select control blocks for the car.
+
A kit contains car-mounted components to make a 2:1, 3:1, or 4:1 system. 27 and 32 mm systems only.
OR
Cars come standard with shackles for attaching the mainsheet to the car. Upgrade to a stand-up toggle with control tangs to attach high-performance ball bearing control blocks. See Purchase Selection Guides for examples and sizing.
+
4. Choose End Controls
Choose end controls that mate with the control blocks on the traveler car for the correct purchase system, including a deadend, allowing clean-running lines. Use Carbo® ball bearing end controls with toggle-mounted, ball bearing control blocks, or use ESP sleeve bearing end controls with ESP car-mounted, sleeve bearing control blocks.
Kit
Options include end controls with attached cams, or purchase cams separately and mount remotely. See pages 16–17 for common systems.
5. Choose Endstops
Endstops are designed to absorb shock loads and should be installed when end controls are not used. Trim caps finish off track ends cleanly. Select high- or low-beam endstops/trim caps to match track. Low-beam, line-shedding endstops prevent snags. Sold in pairs.
CARBO® BALL BEARING END CONTROLS
6. More Information
Previous steps show the most common configurations. Other options include windward sheeting cars, soft attachments, coupled cars, track risers, and track splice links. If you have questions, contact a professional rigger or Harken Technical Service at
[email protected]. ESP SLEEVE BEARING END CONTROLS
WINDWARD SHEETING
SOFT-ATTACH
COUPLED CARS
TRACK RISERS
Sailing
Ordering Genoa Lead Systems
The chart below sizes lead cars for the #1, #2, and #3 genoas based on typical loads for these sails. See Block Loading vs Angle of Deflection and Genoa System Loading on page 35 to size for different deflection angles and wind speeds. Visit www.harken.com or see page 21 for common configurations.
Adjustable Genoa Lead Cars #1 & #2 Genoa #3 Genoa
22 mm Small Boat m2 ft2 450 41 175 16
Maximum sail area 32 mm Big Boat Standard High-load ft2 m2 ft2 m2 1500 139 2700 251 435 40 650 60
27 mm Midrange ft2 m2 750 70 330 31
MiniMaxi ft2 m2 4400 409 1300 121
Assumes 155% Genoa/25 knots apparent wind/45° sheet lead angle Assumes 100% Genoa/40 knots apparent wind/60° sheet lead angle
109
320
Harken
Harken 13 mm Micro CB Traveller Cars Micro Captive Ball Traveler Cars are used on small dinghies and catamarans. The one-piece solid aluminum construction is lightweight and strong. Machined aluminum Hardkoteanodized races permit Torlon balls to transition smoothly from the active-to-return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle cars have low pivot points to handle non-vertical loads. Description
SWL lbs
Breaking Strength lbs
HAR 2700
Micro Traveler CB Car w/Pivot Shackle
310
1500
HAR 2701
Micro CB Traveler Car w/Control Block
310
1500
HAR 2703
Micro Traveler CB Car for Ti-Lite
310
1500
Part #
▪▪Mainsheet cars ▪▪Jib sheet cars ▪▪Vangs on small dinghies ▪▪Control on small keelboats
2700 2701
2703
Harken 13 mm Micro CB Track & Accessories HAR 2704 HAR 2705 HAR 2706 HAR 2707.1M HAR 2707.2M HAR 2707.600MM
Control block (pair) Control tang (pair) Micro endstop (pair) Low-beam track 1-meter Low-beam track 2-meter Low-beam track .6-meter
2704
2705 2706 2707
Harken 22 mm Small Boat Traveller CB Cars Used on large dinghies, keelboats, beach cats and offshore boats to 27 ft (8 m). One-piece solid aluminum construction. Ball bearings run on machined aluminum Hardkoteanodized races for smooth trimming and easing. Stainless steel wire guides keep the balls captive when the car is off the track. Cars with a 500 lb (227 kg) safe working load use Delrin balls. Cars with higher safe working load use high-strength Torlon balls. Ti-lite cars matched with Ti-lite blocks provide the ultimate, lightweight, low-profile system. High-tech line replaces shackles and spring. Description
SWL lbs
Breaking Strength lbs
HAR 2726
Small Boat CD Car w/Shackle
500
2500
HAR 2727
HL Small Boat CB Car w/Shackle
850
2500
HAR 2730
Small Boat CB Car w/Toggle
500
2500
HAR 2731
HL Small Boat CB Car w/Toggle
850
2500
HAR 2732
Small Boat CB Car for T-Lite Block
500
2500
HAR 2734
HL Small Boat CB Car w/Fixed Sheaves & Cam
850
2500
HAR 2735
1250 Small Boat Car w/Toggle
1250
2500
HAR 2736
1250 Small Boat CB Car w/Fixed Sheaves
1250
2500
Sailing
Part #
Ask for a Harken Catalogue
▪▪Mainsheet Systems ▪▪Genoa Leads
2726/2727
2730/2731
2734 2732
2736 2735
321
Harken Harken 22 mm Small Boat Accessories HAR 173 HAR 174 HAR 264 HAR 2723 HAR 2749
End stop small boat low profile track End stop small boat hi-beam track HD end stop for 143/155 track Pair trim caps (2721 only) Swivel Ear Set
Harken 22 mm Small Boat Track HAR 2720-1.2M HAR 2720-1.8M HAR 2720-1M HAR 2721-1.2M HAR 2721-1.5M HAR 2725-1.5M
1.2m Low profile track 1.8m Low profile track 1.0m Low profile track 1.2m Hi-beam track 1.5m Hi-beam track High beam track
2749
Harken 27 mm Endstops & Trim Caps When end controls are not used, add 1522 or 1523 endstops to absorb shock loads. Sold in pairs. HAR 1621 HAR 1622
Mid range track tim cap Mid range track trim cap 1622
1621
Harken CB Traveler Cars 27 mm Midrange & 32 mm Big Boat Midrange CB traveler cars are built to handle high loads on boats from 27ft to 34ft. Big Boat CB traveler cars handle high loads on boats from 32 to 50ft and up to 70ft with coupled cars. The one-piece solid aluminum construction is lightweight and strong. Ball bearings run on machined aluminum Hardkoteanodized races for smooth trimming and easing. Stainless steel wire guides keep balls captive when the car is off the track. Shackle/ toggle cars have low pivot points to handle nonvertical loads. Control blocks attach to toggle ears, reducing load on the car. Lightweight soft attachment cars provide a variety of rigging solutions - athwartship jib or mainsheet systems, for example. Lash Carbo Loop blocks to the car for traveler control. Car-mounted control blocks come preassembled with all components. When ordering please specify control block purchase from 1:1 to 4:1. Part#
Description
L
W
H
Max Work Load
Breaking Load
T2701B
27 mm Midrange
HAR T2701B HAR T2701B.HL HAR T2702B HAR T2702B.HL HAR T2703B
Car/shackle
4-1/4"
2-3/4"
2"
1800
5000
High-load car/shackle
5-3/16"
2-3/4"
2"
2300
5000
Car/stand-up toggle
4-1/4"
2-3/4"
3-1/8"
1800
5000
High-load car/stand-up toggle
5-3/16"
2-3/4"
3-1/8"
2300
5000
4-1/4"
2-3/4"
3-1/8"
1800
5000
High-load car/stand-up toggle/ears
5-3/16"
2-3/4"
3-1/8"
2300
5000
HAR T2731B.HL
High-load car/shackle/3:1 controls
5-3/16"
3-7/32"
2"
2300
5000
5-3/8"
3-11/32"
2-5/8"
3000
3175
32 mm Big Boat
HAR T3201B HAR T3203B
Car/shackle
T2703B
Car/stand-up toggle/ears
5-3/8"
3-11/32"
3-1/2"
3000
7000
High-load car/stand-up toggle/ears
7-7/16"
3-11/32"
3-1/2"
4500
9000
HAR T3231B*
Car/shackle/3:1 controls
5-3/8"
4"
2-5/8"
3000
3175
HAR T3232B
Car/stand-up toggle/3:1 controls
5-3/8"
4"
3-1/2"
3000
3175
HAR T3242B
Car/stand-up toggle/4:1 controls
5-3/8"
4-3/8"
3-1/2"
3000
3175
HAR T3203B.HL
T3231B
Sailing
Car/stand-up toggle/ears
HAR T2703B.HL
T2702B
322
Harken
Harken End Controls 22 mm, 27 mm, & 32 mm 22 mm Small Boat end controls provide 2:1 to 4:1 purchases. Carbo AirBlock components combined with Micro Carbo-Cam cleats keep traveler weight minimal. 27 mm Midrange and 32 mm Big Boat end controls allow the installation of 2:1 to 5:1 purchases. 40 mm Carbo AirBlock sheaves with free-running Torlon® ball bearings let cars instantly adjust and release under load. Cam-Matic cleats provide precise cleating. Use E2750.HB Midrange and E3250.HB Big Boat double-sheave end controls for cabintop travelers with cars using 3:1 or 4:1 purchases. Contact Harken to order special-length track with mounting holes for E2750.HB and E3250.HB end controls.
2740
Part #
2741
2742
2743
Description
Sheave
2755
L
E2750
W
Max Line
MaxWork Load lb
Breaking Load lb
Purchase
5/16"
300
600
2:1
22 mm Small Boat
HAR 2740
Single sheave (pair)
1-1/8"
3-7/16"
1-3/8"
HAR 2741
Single sheave/423 Carbo-Cam (pair)
1-1/8"
3-7/16"
3-1/8"
1/4"
300
600
2:1
HAR 2742
Double sheave (pair)
1-1/8"
3-7/16"
1-3/8"
5/16"
600
1200
3:1/4:1
HAR 2743
Double sheave/423 Carbo-Cam (pair)
1-1/8"
3-7/16"
3-1/8"
1/4"
600
1200
3:1/4:1
HAR 2755
Pinstop (Use with 2751 track)
-
1-5/8"
1-3/8"
-
-
-
-
27 mm Midrange
HAR E2750
Double sheave/deadend (pair)
1-3/8"
3-3/4"
1-13/16"
2-5/8"
1800
3600
4:1
HAR E2756
Double sheave/deadend/Carbo-Cam cleat (pair)
1-3/8"
3-3/4"
3-15/16"
3/8"
600
500
4:1
HAR E3250
Double sheave/deadend (pair)
1-3/8"
3-3/4"
1-13/16"
3/8"
1800
3600
4:1
HAR E3256
Double sheave/deadend/Cam-Matic cleat (pair)
1-3/8"
3-3/4"
4-1/8"
3/8"
900
2300
4:1
32 mm Big Boat
Sailing
Harken Genoa Lead Cars 22 mm Small Boat & 27 mm Midrange
G226S
CB adjustable genoa lead cars feature recirculating Torlon ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Cars feature car-mounted, axle-bearing control blocks for strength and durability. All CB genoa lead cars are compatible with Harken end controls. Performance CB Adjustable Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads for easy trimming and fore and aft adjustment. ESP CB Adjustable & Pinstop Sheave carriers feature ESP axle-bearing sheaves. Use pinstop cars in applications where lead positions change infrequently. Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you to upgrade your system without changing track. Part #
Description
Sheave
Max. Line
G272B
G276S
SWL lbs
Breaking Strength lbs
Track
2,300 lbs
5,000 lbs
R27
ESP CB Adjustable
HAR G272B
Midrange/Sheave
HAR G226S
Small Boat/Pinstop
1-1/2”
1/2”
1,250 lbs
2,500 lbs
2751
HAR G276S
Midrange Boat/Pinstop
2”
1/2”
3,000 lbs
6,000 lbs
R27
2-1/4”
-
ESP Pinstop
ol. contr . o t n leg dow omes conds on a ke. c l l a a e It your w ean s NG. n m i I n n N a io W I N fect trim c e competit r h t e p e leav The s that d n o c Se Harken
Achieve optimal sail shape and boat speed in a heartbeat with Harken’s new highperformance genoa lead cars, designed with roller bearing sheaves for lightningquick, smooth-rolling control. High-performance genoa lead cars are part of our new modular system with customizable purchase for easy system configuration. Upgrade today!
Captive ball bearings
Built-in bungee tang
TIP... When coming out of a tack, pull the genoa lead car forward to power up the boat, then gradually ease it aft to the correct adjustment for optimal sail shape and speed.
INNOVATIVE SAILING SOLUTIONS Made in USA
Get your lead today at www.harken.com
NEW!
Carbo® OneTouch® LOCKING WINCH HANDLE
LIGHTER, QUICKER, STRONGER • Full-length grab bar simplifies crew work • Carbo® technology: lighter weight and just as strong • SpeedGrip technology: single-handed speed, double-handed power
Learn more: www.harken.com/Carbo-OneTouch MADE IN USA
325
Harken
N
Harken Carbo® OneTouch Winch Handle SpeedGrip technology: The only handle with independent swivel between ball bearing knob and hand grip for faster trimming and powerful grinding.
Carbo technology: Lightweight, strong, reliable fiber‐reinforced composite construction.
Manufactured & assembled in Harken USA
Easy one‐hand operation: Grab anywhere— full length grab bar locks/unlocks handle. Ergonomic shape is easy to activate with either palm or thumb.
9-1/2“ (241 mm) 7-1/8” (181 mm) Rise 1-5/16” (33 mm) Weight 20.8 oz (590 g)
HAR B10HOT
W E
Lightweight and fast-acting, the Carbo OneTouch locking winch handle makes grinding winches easy. Racers will maneuver faster and cruisers will have confidence in a reliable and easy to use winch handle. ▪▪Easy one-hand operation: Ergonomically-designed, full-length grab bar locks/unlocks patented locking mechanism to remove the handle from the winch ▪▪Carbo technology: Lightweight, strong and reliable fiber-reinforced composite construction; UV-stabilized protection; marine-grade stainless steel locking mechanism; hardcoat-anodized aluminum drive socket ▪▪SpeedGrip technology: Independent swivel between knob and hand grip keeps wrists and arms in best power position for fast trimming with palm at low loads and powerful two-handed grinding when Length loads are high Height
Locking Pins are 316 marine grade stainless steel.
Stardrive is 6061 T6 highstrength black anodized aluminum.
Harken Ball Bearing Handles These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing grip that efficiently transmit power into the winch. All handles fit international standard winch sockets. Locking vs Plain: Lock-in handles are easy to engage and release with a thumb switch. Racers prefer plain handles because they are faster to insert. Handle Length: 10” (254 mm) is the most comfortable handle length for most sailors. Published power ratios are based on this length. 8 in (203 mm) handles grind faster because they swing through a smaller circle, but power is reduced by 20%. 8 in (203 mm) handles are ideal for smaller boats and light air where speed is more important than power. SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip permits low-load fast cranking using the palm, and powerful two-handed grinding when loads are high. The low profile B8ASGLP is made for fast, one-handed cranking where speed is the concern, not power. Part #
Length
Description
Height
B8AL
B8AP
Standard
HAR B10ADL
10”
Locking Aluminum Double
11-1/2”
HAR B10AL
10”
Locking Aluminum
7”
HAR B10AP
10”
Plain Aluminum
7”
HAR B8AL
8”
Locking Aluminum
6-5/8”
HAR B8AP
8”
Plain Aluminum
6-5/8”
B10ADL
B8ASGLP
SpeedGrip
HAR B10ASG
10”
HAR B8ASG
8”
SpeedGrip Aluminum
7-3/16”
HAR B8ASGLP
8”
SpeedGrip Low Profile Aluminum
4-13/16”
HAR BK4512 HAR BK4513
SpeedGrip Aluminum
7-7/16” B8ASG
Winch service kit (10 pawls/10 springs) Tube winch grease, 100ml
Harken Aluminum Tiller Extensions
L
Tube
Weight oz
Fastener
HAR 7100.24
Part #
24
5/8"
4.1
3/16"
HAR 7100.30
30
5/8"
4.9
3/16"
HAR 7100.33
33
5/8"
5.2
3/16"
HAR 7100.36
36
5/8"
5.6
3/16"
HAR 7100.42
42
5/8"
6.3
3/16"
48
5/8"
7.1
3/16"
HAR 7100.48 HAR 7101
Tiller extension base
HAR 7102
Replacement universal joint
7101
7102
Sailing
The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The simple and lightweight design has no unnecessary frills—every aspect contributes to its strength, stiffness, or comfort. The universal joint and nonslip foam grip are UV-protected and perfect for full dagger-grip and fingertip steering.
326
Harken
Harken Aluminum Winches Designed for sailors who want lightweight, extremely strong winches with plenty of power. The drum’s gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. When easing, the angle of the ribs stops line from rising, preventing overrides and providing a smooth controlled release as the line exits the winch. Aluminum drums and high-strength composite self-tailing jaws and skirt save weight. Composite roller bearings reduce friction under load and don’t require lubrication. Loadcarrying gears and pins are 17-4PH stainless steel for strength and durability. Small boat winches are available in single speed. Self-tailing models sizes 60 and up come in two or three speeds. Part #
Drum (D)
Base (B)
Height (H)
HAR B6A
2-3/8"
3-9/16"
3-1/4"
HAR B8A
2-11/16"
4-1/2"
3-9/16"
Line Entry Height (LE)
B6A
Line Max
Gear Ratio 1 2 3
Power Ratio 1 2
1-5/16"
-
1 - -
8.4 -
1-1/2"
-
1 - -
7.5 -
1/4" - 3/8"
2.43 - -
16.9 -
Classic Plain-Top
Radial Self-Tailing
HAR 15STA
2-7/8"
4-3/4"
5-1/2"
2-1/8"
HAR 20STA
2-7/8"
5-3/8"
5-13/16"
2-3/8"
1/4" - 1/2"
2.76 - -
19.20 -
HAR 35.2STA
3-1/8"
5-7/8"
6-11/16"
3-1/8"
5/16" - 1/2"
2.13 5.65 -
13.50 35.90
HAR 40.2STA
3-1/8"
6-3/16"
6-7/8"
3-1/4"
5/16" - 1/2"
2.13 6.28 -
13.50 39.90
35.2STA
Harken Chrome Radial Winches Designed for sailors that want the elegance of mirror-polished chrome to enhance their yacht’s lines. They feature chrome drums, black composite bases and tops, and come in 1-, 2-, or 3-speed self-tailing styles. The drum’s gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. When easing, the angle of the ribs stops line from rising, preventing overrides and providing a smooth controlled release as the line exits the winch. High strength composite self-tailing jaws and skirt save weight. Composite roller bearings reduce friction under load and don’t require lubrication. Load-carrying gears and pins are 17-4PH stainless steel for strength and durability. Small Boat winches are available in single speed. Self-tailing models sizes 60 and up come in two or three speeds. Drum (D)
Base (B)
Height (H)
Line Entry Height (LE)
HAR 20STC
2-7/8"
5-3/8"
5-13/16"
2-3/8"
1/4" - 1/2"
2.76 - -
19.20 -
HAR 35.2STC
3-1/8"
5-7/8"
6-11/16"
3-1/8"
5/16" - 1/2"
2.13 5.65 -
13.50 35.90
HAR 40.2STC
3-1/8"
6-3/16"
6-7/8"
3-1/4"
5/16" - 1/2"
2.13 6.28 -
13.50 39.90
Part #
Line Max
Gear Ratio 1 2 3
Power Ratio 1 2
Sailing
Harken Performa Winches Optimized For High-Tech Line Harken Performa™ winches are for racers and racer/cruisers using high-tech line who don't wish to invest in a carbon winch, or who need winches in smaller sizes. The Performa design combines the efficiency of Harken Radial® winches with the sandblasted grip of its Carbon Fiber racing line for a powerful hybrid that lets crew trim and ease sails quickly and repeatedly as wind strength and directions change. Part #
Drum
Base
Height
HAR 20.2PTP
2-7/8”
5-3/8”
5-1/16”
Line Entry Height (LE)
Line Max
Gear Ratio 1 2
Power Ratio 1 2
-
1 2.76
6.95 19.20
Plain-Top
2-3/8”
HAR 35.2PTP
3-1/8”
5-7/8”
5-13/16”
3-1/8”
-
2.13 5.65
13.50 35.90
HAR 40.2PTP
3-1/8"
6-3/16"
6"
3-1/4"
-
2.3 6.28
13.50 39.90
Self-Tailing
HAR 20STP
2-7/8”
5-3/8”
5-13/16”
2-3/8”
1/4”-3/8”
-
19.20
HAR 35.2STP
3-1/8”
5-7/8”
6-11/16”
3-1/8”
5/16”-1/2”
5.65
13.50 35.90
HAR 40.2STP
3-1/8"
6-3/16"
6-7/8"
3-1/4"
1/2"
2.13 6.28
13.50 39.90
HAR 46.2STP
3-15/16"
7-1/4"
7-15/16"
3-9/16"
9/16"
2.30 9.17
11.70 46.50
Sandblasted grip Composite Bearing Multiple styles
327
Harken
Mkiv Jib reefing & furling
1
for racing anD PerforMance cruising sailors MKIV furling systems are strong, lightweight and aerodynamic, with the performance and features Harken® is known for. Longevity, ease of use and simplicity of installation are crucial components of the design. These free-rolling furlers make all the difference in headsail control by allowing racers and cruisers to quickly furl and reef from the safety of the cockpit, while maintaining great sail shape and optimal speed.
2
3
Details Make the Difference easy reefing anD furling
Multiple rows of large-diameter Torlon® ball bearings used in high-load areas to minimize friction for easy reefing and furling; require no lubrication or isolating seals.
More furling Power
Large inner spool diameter increases mechanical advantage for powerful reefing and furling. Smaller outside dimension allows unit to fit narrow bows or below deck. Unit rotates around rod or wire headstay so furling bearings do not carry the headstay load for easy furling.
long-lasting Protective finish
Specially formulated low-stretch black line is abrasion and UV resistant; standard on units 0, 1 and 2.
Strong, lightweight halyard swivel reduces windage and weight aloft to minimize pitching and heeling. Stacked bearing races evenly distribute radial and thrust loads to ball bearings; foils turn freely under halyard loads. Independent halyard and tack swivels furl sail center before head and tack for improved sail shape and upwind pointing.
4
2. strong foil Joints
Tough triple-interlock foil joints withstand years of torque loading. Connector’s geometric shape interlocks to foil and secures with a syringe-injected adhesive into an engineered channel. Screws provide final lock.
5
3. easy to assemble foils
C-shaped open connectors with low-friction plastic isolators slip onto the headstay wire and into foil for easy installation.
4. Drum installs over existing turnbuckle
Units are adaptable to a variety of rigging options for easy installation. Harken toggle assembly accepts standard turnbuckle using swage, rod, Norseman® or Sta-Lok® terminals. Toggle flips for fork or tang chainplate installation. A single stainless steel clevis pin provides access to the turnbuckle for adjustment.
6
Sailing
Aluminum line guard, torque tube and swivels are deepsaturation Hardkote-anodized for no-fade UV-stabilization, strength and durability. The Hardkote-anodized line guard is urethane coated for additional corrosion protection.
1. halyard swivel turns freely
5. stainless steel feeder
Stainless steel feeder allows fast singlehanded hoist and quick sail changes.
6. removable split Drum
Line guard and spool come off easily for racing.
7. Double foil grooves for racing
Aerodynamic aluminum Air Foils® handle extreme reefing loads. Double foil grooves allow fast hoists, douses and sail changes.
7
DO NOT use Harken equipment for human suspension.
157
328
Harken
Ordering Furling 1. Choose furler type
The table below is based on sailing style and approximate boat size. This table is only a guideline. Do not use it to determine unit size. Size is based on the headstay and clevis pin diameters listed on unit pages.
Comparison Chart MKIV
ESP
Racers/Performance Cruisers
Cruisers
Note: Typical boat lengths are listed as a guideline but are not the determining factor. Check with Harken® if your length varies. Typical Boat Lengths
Unit 0: 22–30 ft (6.5–9.1 m) Unit 1: 28–36 ft (8.5–11 m) Unit 2: 35–46 ft (10–14.2 m) Unit 3: 45–60 ft (13.7–18.3 m) Unit 4: 65–80 ft (19.8–24.4 m)
Unit 0: 20–28 ft (6–8.5 m) Unit 1: 26–35 ft (8–10.7 m) Unit 2: 34–46 ft (10.4–14 m) Unit 3: 45–61 ft (13.7–18.6 m)
Foils
Double groove Air® Foil Stainless steel feeder
Single Groove Round Foil Stainless steel feeder
Halyard and Tack Swivel
Independent swivels for improved sail shape
Fixed
Drum
Removable split drum for racing
Fixed
Line
Included on Units 0, 1, 2
Not Included
2.2.Determine unitsize size Determine unit
SizeSize is based on on thethe headstay diameterslisted listedononunit unitpages. pages. is based headstayand andclevis clevis pin pin diameters Choose between unit sizes when diameters are shared by considering stay length 3. Determine if additional foils needed, topany foil and typical boat size recommendations. Contact ESP Harken-®Order if you have questions. Use the I and J measurements to determine the length of the headstay. If the 3. Determine if additional foils needed existing headstay is longer than the standard length listed under Headstay Use the I and J measurements to determine the length of the headstay. If the existing Length on unit pages, order additional foilslisted and under connectors. AllLength ESP furlers headstay is longer than the standard length Headstay on unit require that you order a precut top foil. See unit pages pages, order additional foils and connectors. In some cases one or two extra foils and connectors may be necessary.
Forestay
Measure wire or rod diameter
Measure clevis pin diameter
Bow
4. Determine Toggle, Link Plate or Leg Kit 4. Determine Link Plate, or Leg Kit in the 2013 Harken catalogue to See the MKIV &Toggle, ESP Toggle & Rigging Options Use short toggle (MKIV) or short leg kits (ESP) for maximum luff length. For ESP, determine toggle and rigging requirements. use long or medium leg kits to accommodate a turnbuckle or to clear an anchor.
Choose lead and accessories, ESP -ESP Order- Order line line 5.5.Choose leadblock blockkitkit and accessories,
® Harken recommends equippingevery every furling furling system ratchet leadlead block kit. kit. Harken recommends equipping systemwith witha a ratchet block Other on the Furling Accessories page (186) include equipment for halyard Order lineparts for ESP furlers. management and racing hardware for faster sail changes. Order line for ESP furlers.
I
Sailing
6.6.Prepare andheadstay headstay Prepare sail sail and
HaveHave a luff tape added Matchthe the luff to length of the stay length a luff tape addedtotoyour your genoa. genoa. Match sailsail length the stay length minus minus height ofhalyard the halyard andunit. lower sizing information thethe height of the swivelswivel and lower Seeunit. sizingSee information on page 169.in the 2013 Harken catalogue All MKIV and those ESP furlers with long or medium leg kits install over the existing All MKIV and those ESP furlers with longforleg kits install the turnbuckle. The turnbuckle is accessible adjustment by over raising theexisting drum. See the turnbuckle. MKIV & ESP Toggle & Rigging Options on page 180 to determine toggle and rigging The requirements. turnbuckle isSome accessible for will adjustment by raising the drum. headstays require cutting and shortening to Some fit Harken headstays will requireonly cutting and shortening to fit Harken toggles. Sometimes toggle. Sometimes the lower threaded turnbuckle fitting needs changing. only Check the lower turnbuckle needs changing. Check with athreaded professional rigger onfitting stay condition before reusing stay.with a professsional rigger on stay condition before reusing. For all units, rod rigging requires a Harken rod adapter stud and it must be cut For all rod rigging requires arod Harken adapter stud and it must be cut andunits, coldheaded by an authorized servicerod center. and coldheaded by an authorized rod service center.
7. Contact If you have any questions, please contact your dealer or Harken Technical Service. 7. Contact
J Headstay Length =
MKIV Jaw/Jaw toggle
ESP Short Leg Kit
If you have any questions, please contact your dealer or Harken Technical Service
MKIV Long Link Plate
168
I2 + J2
ESP Long Leg Kit
329
Harken Harken MKIV Unit 0 Boat Length 22' - 30' (6.5 - 9.1 m) ▪▪Wire Ø: 5/32”, 3/16", 7/32" ▪▪Rod Ø: -4, -6 ▪▪Clevis Pin Ø: 5/16”, 3/8", 7/16" ▪▪Headstay: Standard 38'7" (11.77 m); max 45'7" (13.9 m) Part No.
Bearing shields protect Air Swivel® and tack bearings from UV and dirt Small Air Swivels® turn freely on computer-designed bearing races to reduce windage and weight aloft
Description
HAR 7410.10
Large-diameter ball bearings minimize friction, require no lubrication or isolating seals
Furling system
Toggle Assembly Required - sold separately
HAR 7410.20 3/8
Eye/Jaw reversible toggle assembly with 3/8" (9.5 mm) clevis pin
HAR 7410.20 7/16
Eye/Jaw reversible toggle assembly with 7/16" (11.1 mm) clevis pin Optional Parts
HAR 7410.30
Extra 7' (2.13 m) luff foil extrusion
HAR 7410.31
Extra 61/2" (165 mm) connector with bushings
HAR 7420-4*
-4 rod adapter stud (thread Ø UNF 7/16")
Pressure-cast sculpted aluminum line guard is open for easy line access Large inner spool diameter increases mechanical advantage for more powerful reefing and furling
Harken MKIV Unit 2 Boat Length 35' - 46' (10.6 - 14.2 m)
▪▪Wire Ø: 5/16", 3/8" ▪▪Rod Ø: -12, -17, -22 ▪▪Clevis Pin Ø: 5/8", 3/4" ▪▪Headstay: Standard 60'4" (18.38 m); max 67'4" (20.51 m) Part No.
Description
Harken MKIV Unit 1 Boat Length 28' - 36' (8.3 - 11 m)
HAR 7412.10
▪▪Wire Ø: 1/4", 9/32", 5/16" ▪▪Rod Ø: -8, -10, -12 ▪▪Clevis Pin Ø: 1/2", 5/8" ▪▪Headstay: Standard 45'11" (13.99 m); max 52'11" (16.12 m)
HAR 7412.20 5/8
Eye/Jaw reversible toggle assembly with 5/8" (15.9 mm) clevis pin
HAR 7312.20 5/8
Jaw/Jaw toggle assembly with 5/8" (15.9 mm) clevis pin
HAR 7312.20 3/4
Stud/Jaw toggle assembly with 3/4" (19.1 mm) clevis pin (thread Ø UNF 3/4" LH)
HAR 7312.21 5/8
Long link plate with toggle 5/8" (15.9 mm) clevis pin
HAR 7312.21 3/4
Long link plate with toggle 3/4" (19.1 mm) clevis pin
Part No.
Description
HAR 7411.10
Furling system
Toggle Assembly Required - sold separately
HAR 7411.20 1/2
Eye/Jaw reversible toggle assembly with 1/2" (12.7 mm) clevis pin
HAR 7311.20 1/2
Jaw/Jaw toggle assembly with 1/2" (12.7 mm) clevis pin
HAR 7311.20 5/8
Stud/Jaw toggle assembly with 5/8" (15.9 mm) clevis pin (thread Ø UNF 5/8" LH)
HAR 7311.21 1/2
Long link plate with toggle assembly with 1/2" (12.7 mm) clevis pin
HAR 7311.21 5/8
Long link plate with toggle assembly with 5/8" (15.9 mm) clevis pin
Furling system
Toggle Assembly Required - sold separately
Optional Parts
HAR 7412.30
Extra 7' (2.13 m) luff foil extrusion
HAR 7412.31
Extra 9" (229 mm) connector with bushings
HAR 7425-17
-17 Rod adaptor stud (thread Ø UNF 5/8")*
HAR 7426-22
-22 Rod adaptor stud (thread Ø UNF 3/4")*
Optional Parts
Extra 7' (2.13 m) luff foil extrusion
HAR 7411.31
Extra 7" (178 mm) connector with bushings
HAR 7422-8
-8 Rod adaptor stud (thread Ø UNF 1/2")†
HAR 7423-10
-10 Rod adaptor stud (thread Ø UNF 1/2")†
884
061
†Use with conventional turnbuckle
Sailing
HAR 7411.30
909
944
7404
Harken Jib Reefing & Furling Parts Part No.
Description
HAR 061
Stanchion mount base
HAR 884
Snap shackle for tack/head (each shackle)
HAR 909
Extra 6" (152 mm) connector
HAR 944 HAR 7404
Halyard restrainer (use only when required) Lead block kit: 3 x 7403/1 x 7402/1 x 7401/1 cleat
330
Harken
ESP Jib Reefing & Furling 1 FOR CRUISING SAILORS The ESP Furler is designed for the cruiser looking for an easy-to-assemble furler with an elegant design. Install a Harken® ESP Furler and trim safely from the cockpit when it blows; unfurl instead of motoring when it’s light, for a great day of sailing.
DETAILS MAKE THE DIFFERENCE
2
3
EASY ASSEMBLY AND INSTALLATION
Foils slip over the standard marine eye and headstay wire for easy installation. The adjustable bottom foil fine-tunes the system length. Shackle at the tack and head attach the sail to the furler, with sail shape controlled by halyard tension. There is no need to cut the wire during installation.
STANDS UP TO ELEMENTS
Spool is made from Hard Lube-anodized aluminum. Cover, flange, and guard are molded from glass reinforced polymers for high strength. Foils are clear-anodized for durability. The stainless steel sail feeder is strong and durable.
Sailing
LONG, MEDIUM, OR SHORT LEG KITS TO ADJUST DRUM HEIGHT
Medium and long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase visibility. Removable clamp screws allow legs to pivot out of the way for easy access to the turnbuckle. Choose the long leg kit when using a turnbuckle with swage, Norseman or StaLok® terminals. Medium leg kits work with a variety of turnbuckles; refer to height chart on unit pages. Choose the short leg kit when the furler attaches directly to a marine eye at the bottom of the stay. Short legs allow the sail to be closer to the deck.
OPTIONS
An optional halyard deflector, installed above the foil, prevents the jib halyard and other halyards (such as a spinnaker or additional jib halyards) from wrapping around the foil when furling. Strong, lightweight stanchion-mounted blocks are offered to lead line aft for safe furling from the cockpit.
1. Single-Groove Round Foil
Round foil profile withstands extreme reefing loads for secure furling. Rolls more easily than flat foil shapes.
2. Strong Foil Joints
Tough foil joints withstand years of torque loading. Connector interlocks with foil and secures with screws. No extra adhesive needed for a secure lock.
3. Long, Medium, or Short Leg Kits
Choose long or medium leg kits for furlers with turnbuckles. Check turnbuckle length to determine which leg kit length is required. Choose short leg kits when furler attaches directly to a marine eye fitted to the end of the stay.
Line not included DO NOT use Harken equipment for human suspension.
Sta-Lok® is a registered trademark of Sta-Lok Terminals, Ltd.
175
331
Harken
7420 -4 7421 -8 7422 -8 7423 -10 OPTIONAL PARTS HFG594 HFG233 Optional
7320.30 7321.30
7320.31 7321.31
ESP Unit 0 Typical Boat Length 6 - 8.5 m (20' - 28') Wire Ø Rod Ø Clevis pin Ø 4, 5 mm (5/32", 3/16") -4 (4.37 mm) 8 mm, 9.5 mm (5/16", 3/8") Standard 10.92 m (35'10"); max 12.92 m (42'5") Headstay Length* Part No. Description 7320.10 Furling system Leg Kit Required - order separately See toggle and rigging options page 182 7320.20 5/16** Short leg kit with toggle with 8 mm (5/16") clevis pin. Not for turnbuckle 7320.20 3/8** Short leg kit with toggle with 9.5 mm (3/8") clevis pin. Not for turnbuckle 7320.21 5/16‡ Long leg kit with toggle with 8 mm (5/16") clevis pin 7320.21 3/8‡ Long leg kit with toggle with 9.5 mm (3/8") clevis pin
Optional Parts
7320.20 5/16 7320.20 3/8 7321.20 7/16 7321.20 1/2
Pin-to-pin measurement points
7320.30 Extra 2 m (6.5') luff foil extrusion 7320.31 Extra 216 mm (8.5") standard connector with bushings 7420 -4 -4 rod adaptor stud (thread Ø UNF 7/16") HFG594‡‡ 7 mm x 16.8 m (55') polyester double braid line. Line not included *When using long leg kits add .13 m (5"). **Use without turnbuckle. ‡Use with conventional turnbuckle. ‡‡To use own line, figure 2 X boat length.
7321.22 7/16 7321.22 1/2
7320.21 5/16 7320.21 3/8 7321.21 7/16 7321.21 1/2
ESP Unit 1 Typical Boat Length 7.9 - 10.6 m (26' - 35')
Optional Parts
271 mm 105/8"
Medium Leg Kit Max turnbuckle length
Long leg kit
Sailing
Wire Ø Rod Ø Clevis pin Ø 6, 7, 8 mm ( 7/32", 1/4", 9/32", 5/16") -6, -8, -10 (5.03, 5.72, 6.35 mm) 11, 12.7 mm (7/16", 1/2") Standard 13 m (42'7"); max 17 m (55'8") Headstay Length* Part No. Description 7321.10 Furling system Leg Kit Required - order separately See toggle and rigging options page 182 7321.20 7/16** Short leg kit with toggle with 11 mm (7/16") clevis pin. Not for turnbuckle 7321.20 1/2** Short leg kit with toggle with 12.7 mm (1/2") clevis pin. Not for turnbuckle 7321.22 7/16‡ Medium leg kit with toggle with 11 mm (7/16") clevis pin 7321.22 1/2‡ Medium leg kit with toggle with 12.7 mm (1/2") clevis pin 7321.21 7/16‡ Long leg kit with toggle with 11 mm (7/16") clevis pin 7321.21 1/2‡ Long leg kit with toggle with 12.7 mm ( 1/2") clevis pin 7321.30
Extra 2 m (6.5') luff foil extrusion. Order 1 for stay lengths to 15.22 m (49'11")* Order 2 for stay lengths to 17.22 m (56'6")* 7321.31 Extra 229 m (9") standard connector with bushings. Order 1 for stay lengths to 15.22 m (49'11")* Order 2 for stay lengths to 17.22 m (56'6")* 7421 -6 -6 rod adaptor stud (thread Ø UNF 7/16") 7422 -8 -8 rod adaptor stud (thread Ø UNF 1/2") 7423 -10 -10 rod adaptor stud (thread Ø UNF 1/2") HFG233‡‡ 7 mm x 21.3 m (70') polyester double braid line. Line not included *Add for longer leg kits. Medium leg .095 m (33/4") Long leg .22 m (81/2"). **Use without turnbuckle. ‡Use with conventional turnbuckle. Check maximum turnbuckle length for medium leg kit. ‡‡To use own line, figure 2 X boat length.
178
Medium leg kit
Short leg kit
332
Harken
Optional HFG235
7424 -12 7425 -17 7426 -22 7427 -30 7428 -40
OPTIONAL PARTS
7322.30 7323.30
7322.31 7323.31
ESP Unit 2 Typical Boat Length 10.4 - 14 m (34' - 46') Wire Ø Rod Ø Clevis pin Ø -12 -17, -22 (7.14, 8.38, 9.53 mm) 15.9, 19.1 mm (5/8", 3/4") 8, 10, 12 mm (5/16", 3/8", 7/16") Standard 17.05 m (55'11"); max 21.05 m (69') Headstay Length* Part No. Description 7322.10 Furling system Leg Kit Required - order separately See toggle and rigging options page 182 7322.20 5/8** Short leg kit with toggle with 15.9 mm (5/8") clevis pin. Not for turnbuckle 7322.20 3/4** Short leg kit with toggle with 19.1 mm (3/4") clevis pin. Not for turnbuckle 7322.22 5/8‡ Medium leg kit with toggle with 15.9 mm (5/8") clevis pin. 7322.22 3/4‡ Medium leg kit with toggle with 19.1 mm (3/4") clevis pin. 7322.21 5/8‡ Long leg kit with toggle with 15.9 mm (5/8") clevis pin 7322.21 3/4‡ Long leg kit with toggle with 19.1 mm (3/4") clevis pin
Optional Parts 7322.30
Extra 2 m (6.5') luff foil extrusion. Order 1 for stay lengths to 19.33 m (63'5")* Order 2 for stay lengths to 21.33 m (70')* 7322.31 Extra 24 cm (9.5") standard connector with bushings. Order 1 for stay lengths to 19.33 m (63'5")* Order 2 for stay lengths to 21.33 m (70')* 7424 -12 -12 rod adaptor stud (thread Ø UNF 5/8") 7425 -17 -17 rod adaptor stud (thread Ø UNF 5/8") 7426 -22 -22 rod adaptor stud (thread Ø UNF 3/4") HFG235‡‡ 8 mm x 30.5 m (100') polyester double braid line. Line not included *Add to length for longer leg kits. Medium Leg .175 m (7") Long Leg .305 m (12"). **Use without turnbuckle. ‡Use with conventional turnbuckle. Check maximum turnbuckle length for medium leg kit. ‡‡To use own line figure 2 X boat length.
7322.20 5/8 7322.20 3/4 7323.20 7/8 7323.20 1
Pin-to-pin measurement points
7322.22 5/8 7322.22 3/4 7323.22 7/8 7323.22 1
Sailing
ESP Unit 3 Typical Boat Length 13.7 - 18.6 m (45' - 61') Wire Ø Rod Ø Clevis pin Ø 12.7, 14, 16 mm (1/2", 9/16", 5/8") -22, -30, -40 (9.53, 11.10, 12.7 mm) 22.2, 25.4 mm (7/8", 1") Standard 21.15 m (69'5"); max 25.15 m (82'7") Headstay Length* Part No. Description 7323.10 Furling system Leg Kit Required - order separately See toggle and rigging options page 182 7323.20 7/8** Short leg kit with toggle with 22.2 mm (7/8") clevis pin. Not for turnbuckle 7323.20 1** Short leg kit with toggle with 25.4 mm (1") clevis pin. Not for turnbuckle 7323.22 7/8‡ Medium leg kit with toggle with 22.2 mm ( 7/8") clevis pin. 7323.22 1‡ Medium leg kit with toggle with 25.4 mm (1") clevis pin. 7323.21 7/8‡ Long leg kit with toggle with 22.2 mm (7/8") clevis pin 7323.21 1‡ Long leg kit with toggle with 25.4 mm (1") clevis pin
7322.21 5/8 7322.21 3/4 7323.21 7/8 7323.21 1
Unit 2 411 mm 161/8" Unit 3 489 mm 191/4"
Medium Leg Kit Max turnbuckle length
Long leg kit
Optional Parts 7323.30
Extra 2 m (6.5') luff foil extrusion. Order 1 for stay lengths to 23.5 m (77'1")* Order 2 for stay lengths to 25.5 m (83'8")* 7323.31 Extra 26.7 cm (10.5") standard connector. Order 1 for stay lengths to 23.5 m (77'1")* Order 2 for stay lengths to 25.5 m (83'8")* 7426 -22 -22 rod adaptor stud (thread Ø UNF 3/4") 7427 -30 -30 rod adaptor stud (thread Ø UNF 7/8") 7428 -40 -40 rod adaptor stud (thread Ø UNF 1") *Use 7/16" (10, 12 mm) polyester double braid line not supplied by Harken. To figure line length use 2 X boat length *Add to length for longer leg kits. Medium leg .215 m (81/2") Long leg .37 m (141/2"). **Use without turnbuckle. ‡Use with conventional turnbuckle. Check maximum turnbuckle length for medium leg kit.
Medium leg kit
Short leg kit 179
333
Harken
Integral Hydraulic Backstay Adjusters
Harken’s integral hydraulic backstay adjuster provides the power to optimize sail shape quickly. The cylinder features a built-in, double-acting pump that delivers oil when the handle is both pushed and pulled. This moves oil through the system twice as fast as single-acting pumps on other integrals. Assemblies include a hardcoat-anodized aluminum cylinder and pump, valve, gauge, and stainless pump handle with three attachment options: pin installs handle permanently; O-ring secures handle in socket, but is not permanent; nonlocking handle installs without O-ring and roll pin. All pins and plugs are stainless steel. Cylinders include a clevis on both ends. Standard eye-jaw toggles fit all Harken cylinders.
Easy-to-read, analog gauge located at top of cylinder adjusts to four positions for easy viewing; pressure increments read 0-5 (0-5000 psi).
The pressure-release knob turns clockwise to close and pump, counterclockwise to release. When closing the pump, the knob cannot be over-tightened by hand, preventing damage to the valve. Release speed depends on how far open the knob is turned. Pressure relief is factory set to prevent crew from over-tensioning the backstay. An analog gauge with pressure increments reading 0-5 (0-5000 psi) is prominently mounted at the top of the cylinder. The gauge adjusts to four positions for easy viewing from the cockpit. Harken integral backstay adjusters come in four sizes to fit boats with 5 to 10 mm (7/32 to 3/8") wire—approximately 9 to 18 m (30 to 60 ft).
Harken recommends attaching a toggle to the cylinder’s bottom clevis to accommodate stay movement. Standard eye-jaw toggles fit all Harken cylinders.
Sailing
Blue Jacket 40, Tim Jackett, Bob Johnson, Island Packet Yachts — Blue Jacket Yachts photo
Max wire Ø in mm
Stroke in mm
Pin center length (closed)* in mm
Weight** lb kg
Gap/pin Ø in mm
@ 1000 psi 69 bar lb kg
Pull force*** @ 2000 psi @ 3000 psi 138 bar 207 bar lb kg lb kg
@ 4000 psi 276 bar lb kg
Breaking load lb kg
Part No.
- Size
HCI025110345BCC
-6
7 32
/
5.5
13.5
343
30
762
7.4
3.37
7 16
/
11.1
1243
564
2487 1128 3490 1692
HCI035130345BCC
-10
9 32
/
7
13.5
343
30
762
7.4
3.37
1 2
/
12.7
1243
564
2487 1128 3490 1692 4960 2250 12364 5608
HCI040160385BCC
-12
5 16
/
8
15.2
385
32.8
832
10.8
4.92
5 8
/
15.9
2098
952
4197 1904 6295 2855 8394 3807 20984 9518
5/8 10.8 4.92 15.9 2098 952 **Rod ends (forks) included in weights.
4197 1904 6295 2855 8394 3807 20984 9518 *** Max relief setting is 4500 psi/310 bar.
HCI045160385BCC -17 / 9.5 15.2 385 32.8 832 *For pin center length open add stroke length to pin center length closed. 3 8
--
--
7000 3175
227
334
Harken
Carbo Racing Foil
The engineering resins in these strong, lightweight head foils offer significant advancements over the weaker PVC materials used by other manufacturers. The low-friction twin headsail grooves are ultra-smooth, allowing hoists, douses, and headsail changes to be easily and efficiently executed. Impact resistance is unmatched, with far less foil damage from loaded spinnaker poles, especially in cold weather. Heat has little effect on stiffness.
Trim cap
Foils are UV protected and easy for the trimmer to see. For mast-up installation, simply uncoil the foil and snap onto the stay.
Aluminum Chafe Guard
An aluminum chafe guard keeps spinnaker sheets from damaging the foil during high-speed jibes. Testing shows this guard weighs the same as aramid fiber or composite, and is impervious to wear, unlike UHMW plastic tape which wears away quickly. A Harken chafe guard is included free with the purchase of a 7000, 7001, or 7002 kit.
Feeder for smooth hoists: Funnel-shaped stainless feeder smoothly guides boltrope into head foil for fast hoists.
Prefeeder: Hardcoat-anodized, PTFE-coated aluminum rollers spin freely on low-friction bushings. Kit includes prefeeder. Actual size Unit 3 Unit 2
7006
7000 7001 7002
Unit 1 Unit 0
7000.30 7001.30 7002.30
7003
Sailing
Jeanneau Sun Fast 3600, 11.25 m (36'10") — Jeanneau photo
Max wire Max rod Extrusion Max headstay Ø Ø length length Part No. Description in mm dash mm ft/in m ft/in m 1/4 7000.9m Unit 0 6 -10 6.35 29'6" 9 33'6" 10.2 1/4 7000.12m Unit 0 6 -10 6.35 39'4" 12 43'4" 13.2 1/4 6 -10 6.35 49'2" 15 53'2" 16.2 7000.15m Unit 0 5/16 7001.12m Unit 1 8 -17 8.38 39'4" 12 43'4" 13.2 5/16 8 -17 8.38 52'6" 16 56'5" 17.2 7001.16m Unit 1 5/16 8 -17 8.38 65'7" 20 69'6" 21.2 7001.20m Unit 1 3/8 10 -25 10.31 52'6" 16 56'6" 17.2 7002.16m Unit 2 3/8 10 -25 10.31 65'7" 20 69'7" 21.2 7002.20m Unit 2 3 /8 10 -25 10.31 78'9" 24 82'9" 25.2 7002.24m Unit 2 7/16 11 -30 11.1 78'8.5" 24 82'9" 25.2 7003.24m Unit 3 7/16 11 -30 11.1 91'10" 28 95'9" 29.2 7003.28m Unit 3 7006 Replacement prefeeder — — — — — — — — 7000.30 Unit 0 chafe guard — — — — 3'3" 1 — — 7001.30 Unit 1 chafe guard — — — — 3'3" 1 — — 7002.30 Unit 2 chafe guard — — — — 3'3" 1 — — *Weight without chafe guard. **Nominal dimensions only, actual luff tape dimensions are larger.
166
Spacer tube length ft/in m 3'3" 1 3'3" 1 3'3" 1 3'3" 1 3'3" 1 3'3" 1 3'3" 1 3'3" 1 3'3" 1 3'3" 1 3'3" 1 — — — — — — — —
Extrusion weight lb/ft kg/m .102 .152 .102 .152 .102 .152 .162 .241 .162 .241 .162 .241 .185 .275 .185 .275 .185 .275 .245 .365 .245 .365 — — 2.5 oz 70 g 2.9 oz 82 g 3 oz 85 g
Full system Luff tape weight* size** lb kg in mm 3.29 1.50 #5 (5/32) 4 4.29 1.95 #5 (5/32) 4 5.30 2.41 #5 (5/32) 4 6.99 3.18 #6 (6/32) 5 9.13 4.14 #6 (6/32) 5 11.25 5.10 #6 (6/32) 5 10.43 4.73 #6 (6/32) 5 12.90 5.83 #6 (6/32) 5 15.29 6.93 #6 (6/32) 5 20.08 9.10 #6 (6/32)/#7 (7/32) 5/6 23.31 10.57 #6 (6/32)/#7 (7/32) 5/6 3 oz 85 g — — — — — — — — — — — — — —
335
Harken
Ordering Battcar Systems P
1. Determine system size
Components
The four sizes, Systems AA, A, B, and C, are based on sail area (pages 136–143). If you need to reduce car stack height on mast, see Switch T-Track Battcar Systems (pages 144-146).
Endstop, fixed Track and Mounting Kit
System size AA A B C
Maximum sail area Monohull Multihull 2 ft m2 ft2 m2 350 32 275 25 600 56 500 46 900 83 700 65 1940 180 1510 140
E
Mainsail Area P x E x .5
Typical boat length Monohull Multihull ft m ft m to 37 to 11.3 to 30 to 9.1 37 - 50 11.3 - 15.2 30 - 40 9.1 - 12.2 50 - 60 15.2 - 18.3 40 - 50 12.2 - 15.2 60 - 90 18.3 - 27 50 - 70 15.2 - 21
2. Determine track quantity and type
Use Mainsail Luff Length chart on each system page to determine number of track sections.
Headboard Car Assembly
Slug-mount: Most common. Requires 1 slug-mount kit per track section. Select slug that matches the mast’s bolt rope groove shape. Drill-tap: For masts without a bolt rope groove. Requires 1 splice link at each track joint.
Intermediate Car
3. Choose endstop kit
Quick-release: Includes screwpin or pinstop endstop for bottom of mast and fixed endstop for the top. Fixed: Includes two fixed endstops.
4. Choose cars
Batten Car Options
(Mainsail Batten)
OR
Order 1 headboard, 1 Battcar for every full batten, and use the Intermediate Car Chart to determine number of intermediate cars.
Battcar/receptacle
Battcar/stud
Intermediate Car
CB system: All captive ball bearing components. Lowest friction system for fast sail hoists, douses, and reefs. Combination system: CB headboard and Battcars, Slider intermediate cars. Reduces cost but uses CB in the most critical load areas. Slider system: All Slider components. Raise and lower sails without battling a sail that gets jammed in the groove. Intermediate Cars Distance between battens* m
Intermediate cars between battens
8 or less
2.4 or less
1
9 - 13 14 - 16
2.7 - 4 4.3 - 4.9
2 3
*Boats without full battens should use 1 intermediate CB or Slider car per 1.2 m (4 ft) and no Battcars.
5. Contact
If you have any questions, please contact your dealer or Harken Technical Service.
134
Ask for a Harken Catalogue
Sailing
Endstop, fixed, pinstop, or screwpin
ft
336
Harken Sport / Harken Hoisters
Harken Reflex Performance Sailing Gloves A responsive performance sailing glove designed for active line handling in all conditions. Black Magic palm material superior grip, lasting protection. Durable Black Magic finger wraps - reduced seam bulk, increased dexterity. ▪▪Protective palm pad ▪▪Low-profile watch cut-out ▪▪Molded-rubber wrist closure ▪▪Pull-on tab for easy on/off ▪▪Mesh vents at base of fingers - a cool, custom fit ▪▪Reinforced fingertips ▪▪Molded-rubber guard strips on back
Harken Junior Spectrum 3/4 Finger Gloves For active-line handling on dinghies where its low-profile, lightweight and nimble design reduces bulk and fatigue on smaller hands. ▪▪Palm material and finger wraps provide the highest level of abrasion resistance, protection, and durability ▪▪Finger wraps reduce seam bulk and increase dexterity ▪▪Mesh vents at base of fingers provide a cool, custom fit ▪▪Low-profile watch cutout ▪▪Pull-on tab for easy on and off ▪▪Reinforced fingertips
3/4 Finger HGL 2083XS Extra Small HGL 2083S Small HGL 2083M Medium HGL 2083L Large HGL 2083XL Extra Large HGL 2083XXL Extra Extra Large
Junior 3/4
HGL 2086JM BLUE HGL 2086JM PINK
Blue, Medium Pink, Medium
HGL 2086JL BLUE HGL 2086JL PINK
Blue, Large Pink, Large
Adult 3/4
Harken Black Magic Sailing Gloves Designed as an all-purpose, warm-weather sailing glove. ▪▪Durable double-thick Black Magic® palm material for superior grip ▪▪Nylon Spandex mesh for super fit ▪▪Minimal stretch when wet ▪▪Dries soft 3/4 Finger
HGL 2086S BLUE HGL 2086S PINK
Blue, Small Pink, Small
HGL 2086M BLUE HGL 2086M PINK
Blue, Medium Pink, Medium
HGL 2517-C HGL HAR 2339C HGL HAR 2397C
HGL 2563JM Junior Medium HGL 2563XS Extra Small HGL 2563S Small HGL 2563M Medium HGL 2563L Large HGL 2563XL Extra Large HGL 2563XXL Extra Extra Large
Harken Hoisters
Sailing
Hoisters lift evenly from one, two or four points. Choose your system based on the shape and weight of the items you want to store. All standard Harken Hoisters are fully rigged and set up for maximum vertical lift (ceiling height) of 8’ 6”. Here are a few storage ideas for different Hoister systems: 1-Point Bike/Utility Lift: bikes, garden equipment 2-Point Storage System: kayaks, ladders, tandem/recumbent bikes, removable seats 4-Point Storage Systems: canoes, dinghies, car top sports equipment carriers, Jeep tops, truck caps, storage shelves When selecting your Hoister consider the following: 1. The weight of the item to be stored 2. The desired vertical lift distance Standard Hoister system specifications: Lifting Points
Working Load Limit
Min. Lifting Load
Max. Vertical Lift
Mechanical Advantage
HOI 7800
1
45 lbs
10 lbs
8 ft
2:1
HOI 7808B
2
45 lbs
10 lbs
10 ft
2:1
HOI 7807
2
60 lbs
15 lbs
8.5 ft
3:1
HOI 7801
4
60 lbs
15 lbs
8.5 ft
3:1
HOI 7802
4
90 lbs
25 lbs
8.5 ft
4:1
HOI 7803
4
145 lbs
45 lbs
8.5 ft
6:1
HOI 7806
4
200 lbs
75 lbs
8.5 ft
8:1
Part #
Kevlar wallet, carbon black Croakies eyeglass straps Cap holder
337
Harken Sport / IYE / Lev-O-Gage / Plastream Harken Roll-Top Wet/Dry Bag
Harken Deluxe Bosun's Chair
▪▪Roll-top closure at top for a watertight seal ▪▪Two roll-top fastening points to accommodate large or small loads ▪▪Exterior mesh compartment with bonded zipper opening at bottomseparates/dries wet gear ▪▪Reinforced bottom panel ▪▪Welded seams and components ▪▪Air-purge valve ▪▪Adjustable/removable carry straps also function as backpack straps ▪▪Lightweight material and compressible design ▪▪YKK zippers ▪▪31” x 15” x 7”
Ensures comfortable sitting and lets you work aloft with confidence. The chair is made of heavy-duty polyester canvas with a ply seat padded with 1” thick foam. Includes an adjustable safety belt and two roomy pockets for tools. A carrying case is included. ▪▪Maximum load: 220 lbs HGL 2234
Lev-O-Gage
HGL 2019
IYE Bailer
IYE Bailer Chute design which forms a sump for the collection of water. The aft facing and the non-return flap control temporary back flow. External flange mounting. Plastic construction. All boxed bailers are supplied with stainless fixing nuts and bolts, hole templates, backing washers, where applicable and instructions. IYE 202901 IYE 253001
Super shute 90: 5-3/8” x 3” Super shute 60: 4-3/8” x 2-1/2”
IYE 2519 IYE 2521 IYE 2524 IYE 2525 IYE 2891 IYE 2905 IYE 2934
60 Grill 60 Wedge 60 Latch 60 Non-return flap 90 Chute assembly 90 Locking lever 90 Handle pin
Parts:
307-M
Lev-O-Gage Sailing Clinometers ▪▪Flex-tube, engraved white numerals 3.5" 45° Clinometer 3.5" 10° Levo-Gage II 6.5" 50° Senior
Plastream
Plastream Sail Battens Made of tough composite plastic, these battens are unbreakable.
Made entirely in stainless steel. Design to mount from inside the boat. Supplied complete with template, packing seals where applicable, fixing bolts and nuts.
Type
Size mm
Cutout mm
Mounting
BAI 158401
Super Mini
105 x 60
85 x 40
Internal
BAI 158301
Super Medium
142 x 80
105 x 40
Internal
BAI 158201
Super Max
135 x 79
110 x 54
Internal
Flexible reading light with a 360° swivel head, using a 5 watt 12 volt halogen bulb. Permanent mount.
PSB 102 PSB 106 PSB 108 PSB 109 PSB 116 PSB 118 PSB 119 PSB 120 PSB 126 PSB 128 PSB 129 PSB 130
5/8" x 12" 5/8" x 24" 5/8" x 30" 5/8" x 36" 1" x 24" 1" x 30" 1" x 36" 1" x 40" 1-3/8" x 24" 1-3/8" x 30" 1-3/8" x 36" 1-3/8" x 40"
PSB 135
Batten display
Batten Size 5/8” x 12” 5/8” x 24” 5/8” x 30” 5/8” x 36” 1” x 24” 1” x 30” 1” x 36” 1” x 40” 1-3/8” x 24” 1-3/8” x 30” 1-3/8” x 36” 1-3/8” x 40”
Pieces 6 4 2 2 4 4 4 2 2 4 4 3
Display contains a wall mountable rack and the battens listed below.
135
Sailing
IYE Co Pilot Light
IYE 305300
7301-C
LEV 7301-C LEV 307-M LEV 303-M
IYE Bailers
Part #
303-M
338
RWO RWO Sheaves
R1537 R1550
R1530
R1560
RWO plain bearing sheaves all have molded acetal resin central bearings. Acetal is a particularly good material for wear resistance and high strength and low friction as a bearing. The aluminum sheaves are machined from solid and anodized to protect from corrosion and abrasion resistance. Part #
Dia mm (ins)
Width mm (ins)
Bore mm (ins)
Rope mm (ins)
5 (3/16”)
Acetal
RWO Stainless Blocks Micro 17
RWO R0900
17 (11/16”)
6 (1/4”)
6 (1”)
For general purpose use. They are economical, reliable and extremely versatile with a variety of head fixings and mounts, making them ideal for small rope applications. All models have stainless steel bodies and hollow axles, and are maintenance free. Standard sheave is ‘Acetal’ high load self lubricating for conventional ropes up to 6mm.
RWO R0901
19 (3/4”)
9 (5/16”)
6 (1/4”)
6 (1/4”)
RWO R0921
25 (1”)
10 (3/8”)
6 (1/4”)
8 (5/16”)
RWO R0922
25 (1”)
10 (3/8”)
8 (5/16”)
8 (5/16”)
RWO R0923
25 (1”)
12 (1/2”)
6 (1/4”)
10 (3/8”)
RWO R0925
25 (1”)
13 (1/2”)
9 (5/16”)
10 (3/8”)
RWO R0924
28 (1-1/16”)
10 (3/8”)
7 (9/32”)
8 (5/16”)
RWO R0930
32 (1-1/4”)
8 (5/16”)
6 (1/4”)
4 (5/32”)
RWO R0940
38 (1-1/2”)
14 (9/16”)
9 (5/16”)
10 (3/8”)
RWO R0943
38 (1-1/2”)
15 (5/8”)
13 (1/2”)
10 (3/8”)
RWO R0960
44 (1-3/4”)
15 (5/8”)
10 (3/8”)
12 (7/16”)
RWO R0970
57 (2-1/4”)
16 (5/8”)
14 (9/16”)
12 (1/2”)
RWO R0990
88 (3-1/2”)
15 (5/8”)
10 (3/8”)
12 (1/2”)
R4959
Sheave Size �������������������������������������17mm Max. line size �������������������������������������6mm Shackle pin dia ����������������������������������5mm Breakload �����������������������������������������225kg
R4969
RWO R1530 Single RWO R1550 Single & clevis pin RWO R1537 Micro single + brass RWO R1560 Single micro RWO R4959 “V” Jammer single & becket RWO R4969 Double & becket V jammer R1000
R1080
Aluminum
RWO R0927
25 (1”)
8 (5/16”)
9.5 (3/8”)
3 (1/8”)
RWO R0911
28 (1-1/16”)
12 (1/2”)
10 (3/8”)
3 (1/8”)
R1410/1420
RWO Stainless Aeroblocks 25 mm
R1610
Lightweight ‘Space frame’ electropolished stainless steel body, a large pivoting hollow axle and light grey acetal sheave. R1620
Sheave Size..............................................25mm Max. line size...........................................8 /10mm Breakload..................................................600kg
R1690
RWO Stainless Blocks 25
RWO R1123 RWO R1132 RWO R1133 R4961
Sailing
Same features as the Micro 17 above for ropes up to 10mm.
Sheave Size ��������������������������������� 25mm Max. line size ��������������������������������� 8mm Shackle pin dia ������������������������������ 5mm Breakload...................................... 650kg
RWO R1000 RWO R1080 RWO R1410 RWO R1420 RWO R1430 RWO R1610 RWO R1620 RWO R4960 RWO R4961 RWO R4970
25mm single 25mm double & shackle 25mm bullet budget 25mm bullet (8mm) 25mm bullet (10mm) 25mm mini Micro single Vang single 25mm Vang fiddle 25mm Vang double 25mm
R4960
R4970
Single open swivel, 8mm Single & becket, 10mm Single open swivel, 10mm
339
RWO R3670
RWO Grippit Popular economically priced camcleats. Cams in anodized aluminum alloy with Hi-tech ‘acetal’ axial bearing surfaces to ensure minimum weight and good operational resilience to corrosion and extreme usage. Part #
RWO R3640
R3650
Line
Height
Hole Centres/Fix
Hold
5-12mm
21mm
38/5mm
160kg
RWO Jam Cleats
R3631
Self jamming cleats. Useful for control lines, downhauls and halyards. Part #
RWO R3631
R3591
RWO Lance Cleats
R3632
Construction
Rope
Length
Pack
Black Plastic
5mm
70mm
2
RWO R3632
Black Plastic
8mm
90mm
2
RWO R3650
Stainless Steel
6mm
64mm
1
RWO R3670
Blk Plastic Tubular
6mm
54mm
1
R3595
A unique design utilizing the cam cleat principle. Uses a single rugged aluminum cam mounted vertically in a black moulded reinforced stainless steel frame. Just slide the rope sideways and it runs freely in the fairlead. Available in two sizes with three different colour rollers to simplify line identification, or metal for heavier loads, and available for either port or starboard applications. Metal
Cam
Rope mm
R3593
R3597
Port
3-6
R3595
R3596
R3598
Starboard
3-6
R3602
R3603
R3607
Port
5-10
R3605
-
-
Starboard
5-10
Part # Blue
Green
RWO R3591
R3592
RWO R3594 RWO R3601 RWO R3604
Red
R3952
R3940
R3920
R3932
R3912
RWO Horn Cleats RWO Budget Cleat
In five sizes, suitable for halyard control lines or mooring cleats for the range of ropes. Generous base area allows the cleat to be secured firmly.
Direct replacement for original equipment Laser cleats. Part #
RWO R3570
Line
Height
Hole Centres/Fix
Hold
6-12mm
22mm
42/5mm
85kg
Part # Black
# White
Rope
Length
Pack
RWO R3912
RWO R3910
3mm
65mm
2
RWO R3922
RWO R3920
5mm
100mm
2
RWO R3932
RWO R3930
6mm
140mm
2
RWO R3942
RWO R3940
8mm
180mm
1
RWO R3952
RWO R3950
10mm
215mm
1
Sailing
340
RWO
RWO Telescopic eXtensions
Transat Marine Tiller Extensions
Hiking sticks will help to increase your sailing performance by enabling you to change the extension length ‘at will’, giving more comfort control and freedom of movement. To get the optimum performance from your boat, its balance on all points of sailing is paramount. Adjustable extensions allow the helm to move further forward or out to windward to achieve this. Lightweight anodized aluminum tube with a clearly indicated one way lock-unlock twist mechanism allowing infinite adjustment over length range. The nonslip foam supagrip and the contoured fluted end, give the helm a positive response in the wettest conditions.
Please call Transat Marine for details.
RWO R0512 RWO R0513
Omni 16 70-120mm Omni 16 90-150mm
RWO Fixed Length eXtensions These Fastac tiller eXtensions have been designed to increase sailing performance and comfort, by providing the skipper of any boat with a strong, reliable and easy-to-use piece of quality equipment. Manufactured from hard drawn aluminum (tube) and fitted with a foam handle. 20 mm tube RWO R0614 36” RWO R0615 42” RWO R0616 48”
16 mm tube RWO R0831 24” RWO R0833 30” RWO R0834 36” RWO R0835 42” RWO R0836 48”
Sailing
► Also See
Tiller Extensions pg 294 & 368
TSM HBO24 TSM HBO27 TSM HBO30 TSM HBO36 TSM HBO42
Button/Omni, 24” Button/Omni, 27” Button/Omni, 30” Button/Omni, 36” Button/Omni, 42”
TSM HBS24 TSM HBS27 TSM HBS30 TSM HBS36
Button/Swivel, 24” Button/Swivel, 27” Button/Swivel, 30” Button/Swivel, 36”
TSM HGO24 TSM HGO27 TSM HGO30 TSM HGO36 TSM HGO42 TSM HGO48
Golf/Omni, 24” Golf/Omni, 27” Golf/Omni, 30” Golf/Omni, 36” Golf/Omni, 42” Golf/Omni, 48”
TSM HGS24 TSM HGS27 TSM HGS30 TSM HGS36 TSM HGS42
Golf/Swivel, 24” Golf/Swivel, 27” Golf/Swivel, 30” Golf/Swivel, 36” Golf/Swivel, 42”
341
RWO RWO Tiller Hardware Three main types of swivels are offered including a stainless steel swivel with a plastic connector to fit inside the tube (as R0855). An all stainless steel version to fit the outside of the tube (as R0851) for extra strength. An all-plastic polymer Omniflex connector. ▪▪Elastomeric polymer of the highest quality, as used on sailboard mast knuckles and industrial hinges ▪▪Completely omni-directional in operation and capable of many millions of flexures without failure ▪▪Screw holes pitch is identical to our existing stainless steel base so is interchangeable ▪▪For 16mm tubes
R0851
R0854
R0500
Swivel - Stainless Steel RWO R0500 RWO R0851 RWO R0854 RWO R0855
Screw down 20mm Screw down 16mm Screw down square Screw down 16mm
R0842
R0840 R0855
Swivel - Omniflex RWO R0840 RWO R0842 RWO R0844 RWO R0858
Swivel 16mm Core 16mm Supple 16mm Core 20mm
R0844
R0858
Tiller Tube Accessories 16mm
20mm
-
-
-
-
-
-
R0770 -
R0771
25mm
R0712 -
R0684
R0691
R0692
-
Pack
2
-
2
-
-
2
R0757
R0758
-
-
2
-
-
2
-
1
-
1
R0685 -
R0686** -
R0719
50mm
R0715
R0716
-
-
38mm
R0711
R0756
R0683
32mm
R0713
R0687 -
** Limited Quantity
R0712
R0719
R0711 R0683
RWO Webbing Loops M25 webbing, white plastic, (2/pkg) M25 bridge, black plastic, (2/pkg) M40 bridge, black plastic, (2/pkg) M50 bridge, black plastic, (2/pkg)
RWO Oarlocks Rowlocks for use in production boats to 3.5 meters. RWO R5030 RWO R5032 RWO R5022
Body 50mm (each), White Body 50mm (each), Black Body & 5052 top mount (pair)
Please ask for a RWO Catalogue for a full listing of products
Sailing
RWO R3262 RWO R3263 RWO R3267 RWO R3269
342
RWO
RWO Rudder Hardware Range of anodized aluminum fittings & reinforced nylon transom mounts offer excellent strength, great rigidity, exceptional choice and are lightweight. Transom Mounts have 2 pintle diameters and two or four hole fixing. The transom/pivot distance is 15mm (9/16”) which can be increased by the use of packing pieces. ▪▪Sold by the each.
R3763
Rudder Strap Fittings Pintle Strap
Gudgeon Strap
Stock Width
Short N
30mm
R3702
-
-
R3722
-
-
38mm
-
-
R3713
R3723
-
R3733*
30mm
R3752
-
-
R3712
-
-
38mm
-
R3753
-
-
R3773
R3783
3mm
R3743
R3793
R3793
R3743
R3793
R3793
4mm
R3744
R3794
-
R3744
-
-
6mm
R3746
-
-
R3746
-
-
Strap Packers**
Short W
Long W
Short N
Short W
R3773
Long W
* Request Item ** All strap packers sold in packs of two
Rudderheads w/Hoods W mm
A mm
B mm
C mm
D mm
X mm
Y
P mm
RWO R0781
Part #
21
100
197
266
166
203
0°
8
R0735
Gudgeon
R0745
Pintle
RWO R0783
21
100
213
330
129
223
4°
8
R0736
R0746
Transom Fittings ▪▪Aluminum and reinforced nylon construction
R0736
Pintle Aluminum 2 Hole 4 Hole
8mm Pin
R0745
9.5mm Pin
-
5mm Packer**
-
Gudgeon
Nylon 2 Hole 4 Hole
Aluminum 2 Hole 4 Hole
Nylon 2 Hole 4 Hole
R0746
R3822
R3823
R0735
R0736
R3820
R3821
R0747
R3827
R3828
-
R0737
R3825
R3826
R0739*
R3828
-
Sailing
* Request Items ** All packers sold in packs of two RF5 Pintle Sets 9.5 mm ▪▪Stainless steel construction Part #
Description
P mm
W mm
L mm
F mm
RWO R0794
Gudgeon Rudder
9.5
37
115
6
RWO R0733
Gudgeon Transom
9.5
-
100
6
RF4 Pintle Sets 9.5 mm
R0732
R0794
▪▪Stainless steel construction Part #
Description
P mm
L mm
F mm
RWO R0732
Gudgeon Transom
9.5
80
5
R0733
343
RWO RWO Stainless Steel Rudder Hardware Constructed to the highest standard and electro polished. As a guide for usage 6mm. (1/4”) pins are suitable for boats up to 3m (10ft), 8mm pins (5/16) for up to 3.5m (12ft) dinghies and 9.5mm 3/8 up to 6.6m (22ft) dayboats. Also to be taken into consideration are many other factors such as the boat’s displacement, rudder size and transom, depth etc. Retaining clips spring rests on rudder or transom gudgeon to prevent release of rudderhead. ▪▪Sold by the each R0767
R0602
R0791
R0620 R0601
R0604
R0621
Part #
Description
Pin mm
W mm
L mm
F mm
Boat Max.
R0630
R0747
RF1 Pintle Sets 6mm
RWO R0621
Pintle Rudder
6
12
75
4
3m
RWO R0620
Gudgeon Transom
6
-
50
4
Pram
RF2 Pintle Sets 8mm
RWO R0601
Pintle Rudder
8
13
60
5
3.5m
RWO R0604
Pintle Rudder
8
19
60
5
12’
RWO R0602
Pintle Rudder
8
25
70
5
Light
RWO R0630
Gudgeon Transom
8
-
50
5
Dinghy
RWO R0765
Retaining Clip
-
-
75
5
n/a
RWO R0760
Retaining Clip
-
-
38
5
n/a
RWO R0767
Retaining Clip
-
-
80
5
n/a
80
5
5.8m
RF4 Pintle Sets 9.5mm
R0792
R3828
R03826
RWO R0791
Pintle Rudder
9.5
28
RWO R0792
Gudgeon Transom
9.5
28
80
5
19’
RWO R0742
Pintle Transom
9.5
-
80
5
Large
RWO R0747
Ali Transom Pintle
9.5
-
75
5
Dinghy
RWO R0737
Ali Gudgeon
9.5
-
36
5
Dayboat
RWO R0767
Retaining Clip
-
-
80
5
n/a
RWO R3828
Pintle Transom
9.5
-
75
5
n/a
RWO R3826
Gudgeon Transom
9.5
-
75
5
n/a
Sailing
344
RWO
RWO Bushes Use bushes to protect lines from chafe and ensure easy running through decks and spars. Available in pushfit and screw down they are well-flared at both top and bottom and manufactured from acetal resin. Also available with stainless steel ferrules for leading wire or “Hi tech” lines. Bushes without fixing holes can be pressed or glued into place.
R2060 R3034
R2220
RWO Bungs All the choice you need for transom or buoyancy tank drains. Three types available, push-fit rubber bung version, a half turn bayonet and a screw thread + ‘O’ seal all with matching sockets. Both bayonet and screw bungs are fitted with a retainer to prevent loss. Sold two per pack.
R2066
R3110 R2221
R3030
R3134
R2210
R2067
Black #
White #
R3032
R2062
Type
D mm
R2217
C mm
F mm
X mm
H mm
Spare Bungs
Drain Bung
-
RWO R2060
Bayonet
17
22
4
36
-
RWO R2064 + Seals RWO R2062
17
22
4
36
-
+ Seals RWO R2067
RWO R2066
-
Screw
RWO R2067
-
Screw
RWO R2210
-
Push
9
16
3
28
-
RWO R2217
RWO R2220
-
Push
16
22
4
35
-
-
RWO R2221
-
Push
19
25
4
42
-
-
Bushes Screw Down
RWO R3112
RWO R3110
Plain
9
16
3
28
9
RWO R3122
-
Plain
12
19
4
31
9
RWO R3132
-
Plain
16
22
4
35
9
Plain
19
25
4
42
12
RWO R3152 RWO R3114
-
Ferruled
8
16
3
28
9
RWO R3124
-
Ferruled
11
19
4
31
9
RWO R3134
-
Ferruled
14
22
4
35
9
RWO R3154
-
Ferruled
17
25
4
42
12
Sailing
Bushes Push Fit
RWO R3032
RWO R3030
Plain
6
9
-
-
9
RWO R3042
RWO R3040
Plain
9
13
-
-
13
RWO R3052
-
Plain
13
14
-
-
16
RWO R3034
-
Ferruled
5
9
-
-
9
RWO R3044
-
Ferruled
8
13
-
-
13
RWO R3054
-
Ferruled
11
14
-
-
16
Please ask for a RWO Catalogue for a full listing of products
345
RWO RWO Bullseyes and Fairleads Moulded from high load bearing acetal resin to provide maximum resistance to wear. Bullseyes are available with stainless steel ferrules for leading wire or Hi-tech ropes. Sold two per pack. R3222
R2980
R2600
R2984
R2942
R2602
Black #
White #
Liner
D mm
F mm
X mm
L mm
H mm
W mm
Bullseyes
RWO R2932
RWO R2930
Plain
6
3
15
30
14
9
RWO R2942
RWO R2940
Plain
12
5
24
44
23
14
RWO R2982
RWO R2980
Plain
19
5
33
57
30
19
RWO R2934
-
S/S Ferrule
5
3
15
30
14
9
RWO R2944
-
S/S Ferrule
14
5
24
44
23
14
RWO R2984
-
S/S Ferrule
18
5
33
57
30
19
Bridges
RWO R3212 RWO R3222
RWO R3220
Plain
6
3
15
25
11
9
Plain
8
4
20
31
16
12
RWO R3232
-
Plain
10
5
23
36
18
14
RWO R3252
-
Plain
12
5
25
40
22
14
RWO R2600
-
Plain
12
5
-
70
-
-
RWO R2602
-
Plain
12
5
-
80
-
-
Fairleads
RWO Inspection Covers Allow access to remote areas behind bulkheads inside water tanks or under decks. Two models are available. The screw thread closure with an ‘O’ ring seal in four sizes ensures watertight security. ▪▪Available in black, white or clear
Part # White
Black
Clear
Nominal Dia
Cutout
Fasteners
RWO R4040
RWO R4042
RWO R4043
100mm
108mm
3mm x 6
RWO R4050
RWO R4052
RWO R4053
125mm
140mm
3mm x 6
RWO R4060
RWO R4062
RWO R4063
150mm
157mm
3mm x 8
RWO R4080
RWO R4082
RWO R4083
200mm
220mm
4mm x 8
RWO Cover Accessories
RWO R4045 RWO R4055 RWO R4065 RWO R4085 RWO R4047 RWO R4057 RWO R4067
‘O’ Ring seal 100mm (2 pack) ‘O’ Ring seal 125mm (2 pack) ‘O’ Ring seal 150mm (2 pack) ‘O’ Ring seal 200mm (2 pack) Barnie bag 100mm (misc. colours) each Barnie bag 125mm (misc. colours) each Barnie bag 150mm (misc colours) each
R4047
Sailing
Made from random bright colours with top gusset and draw string available for three smaller sizes of screw inspection covers, to provide good dry secure storage for drinks, food, tools, valuables or any other necessity! Light and flexible making them ideal for shallow sided tanks - easily removable to carry away from the boat.
346
RWO
RWO Slides & Fairleads S/Steel track features an underside curvature to allow for stable fixing to curved surfaces, measures 16mm.(5/8”) internal width, counter punched 76mm (3”) pitch for 5mm (3/16”). Holes are also punched at 19mm (3/4”) pitch to allow for location of plunger, end stops and fairlead sliders. Sold by the each. Part #
Description
Aperture
Length
Fastener
R2760
ID
RWO R2741
Take Off Loop
37
-
11mm
RWO R2751
ASR2741 & Eye Loop
65
-
11mm
RWO R2760
Thumbscrew Adjust Trackstop
26
-
-
RWO R2761
Trackstop Plunge Adjust
25
-
-
RWO R2770
End Stop, Plastic
15
5
RWO R2701
S/S Track
330
5
-
RWO R2702
S/S Track
610
5
-
R2751
R2741
R2770
R2761
RWO Deck Fittings ▪▪Strip anchorages in polished stainless steel to suit most types of hull or gunwhale ▪▪Mast step in stainless steel to suit 20mm inch tenons ▪▪Stainless steel and plastic anchorage plates Part #
Length mm
Description
Width mm
Thick mm
Pin mm
Fixings
R2010
Pack
Deck Fittings & Stem Heads
RWO R2010
Mast Step
138
-
-
5
3 x 5mm
1
RWO R2350
Channel Adjustor
100
-
-
5
3 x 5mm
1
Stem Head
84
-
-
5
6 x 5mm
1
RWO R2150
S/S Strip
25
12
1.6
-
2 x 5mm
2
RWO R2160
S/S Strip
40
12
1.6
-
2 x 5mm
2
RWO R2120
S/S Strip
54
16
1.6
-
2 x 5mm
2
RWO R2130
S/S Strip
76
16
1.6
-
2 x 5mm
2
RWO R2240
S/S Strip
100
19
1.6
-
3 x 5mm
1
RWO R2250
S/S Strip
127
19
1.6
-
4 x 5mm
1
RWO R2260
S/S Strip
150
19
1.6
-
4 x 5mm
1
RWO R2280
S/S Strip
203
19
1.6
-
5 x 5mm
1
RWO R2390
Shroud Plate
165
25
3.0
-
4 x 8mm
1
Sailing
RWO R2410**
RWO R2870 RWO R2880 RWO R2891 RWO R3284
** Limited Quantities
40mm anchorage plate, S/S 50mm anchorage plate, S/S 50mm anchorage plate, black plastic 50mm webbing buckle, S/S & plastic
RWO Stainless Steel Strip RWO R2140
100mm x 19mm, 3 fittings
R2350
R2150
R2410
R2891 R2880
R3284
347
RWO RWO Roller Traveller Systems The XT1 Roller Traveller System suitable for dinghies and dayboats up to 6 metres (20ft). Operates on a specially designed track section that allows the angled rollers to operate freely under all conditions even when angular loads are applied. The cars have rugged take off points, open-linked to reduce height and allow immediate attachment of mainsheet systems and pivot to permit take-off angles of up to 40 . Add-ons include control line blocks and beckets with or without cleat.
R3331
The car body is made from light weight stainless steel pressing and heavily ribbed for strength.
R3367
The track is made from black anodised high grade corrosion resistant alloy, it is extremely light, yet rigid enough to span limited distances unsupported. XT1 - Cars & Accessories
Length
Break Load
R3290
Weight
Notes
RWO R3331
Car 4 Wheel
60
225
75 gms
RWO R3340
Car 4 Wheel & Control Sheaves
60
225
109 gms
RWO R3290
Track stop sliding
20
-
19 gms
Screw down type
RWO R3367
Replacement Wheels (4)
-
-
7 gms
Takes 8mm rope
RWO R3370
Trackend Stop
-
-
8 gms
5mm fixings x 4
RWO R3380
Trackend Stop + Sheave
-
-
40 gms
Takes 8mm rope
RWO R3303
XT1 track
910
-
380 gms
RWO R3305
XT1 track
1220
-
530 gms
#8 fasteners on 4” centres
R3370
XT1 Tracks
RWO Roller Traveller Systems The XT2 Roller Traveller system suitable for sailboats up to 9 metres (30ft) using six wheel cars and 7 metres (24ft) using the four wheel version. The traveller car is made from heavy gauge stainless fitted with wide replaceable acetal rollers designed to run freely under load. The strong closed link take off point allows immediate attachment of mainsheet systems and permits take-off angles of up to 40°. Also suitable for boom vangs and outhauls on larger craft. R3430
Add-ons include track mounting brackets, the cars can be converted to have up to 3:1 control line purchase or a central line cleating cat adapter unit. XT2 Track can span a limited distance unsupported. XT2 - Cars & Accessories
Length
Break Load
Weight
RWO R3430
Traveller car 4 wheel
77
900
175 gms
RWO R3431
Traveller car 6 wheel
90
1200
200 gms
RWO R3467
Replacement wheels (4pk)
-
-
9 gms
R3431
RWO Genoa Cars
Description
Length mm
Width mm
Fast mm
Hole Ctr mm
RWO R2640
Fairlead Slide & Loop Plunger
85
35
-
-
RWO R2660
Genoa Sheet Block Car Plunger
120
35
-
-
RWO R2635
25mm Track
1220
25
6
100
RWO R2691
Trackend Stop (4 pack)
-
-
6
-
RWO R2750
Slotted 5mm Take Off & Loops
65
-
-
-
Part #
R2660 R2640
R2691
R2750
Sailing
Low profile sheet blocks have small diameter wide rollers keeping the sheeting position close to the deck and coping with changes of direction. The robust spring plungers locate positively in the track holes whilst the knob pull is profiled to minimize rope snarl ups.
348
RWO
RWO Trapeze Gear Hoist rings with a block and used in conjunction with a trapeze jammer give full height adjustment.
Part #
R4000
R4120
R4110
R4094
Description
Width mm
Height mm
RWO R4094
Nova Plain Bearing Block & S/S Loop
50
130
RWO R4000
S/S Hook for eyelets & 50mm webbing
90
95
RWO R4100
S/S Ring & Loop
52
190
RWO R4110
S/S Frame & Plastic Handle
115
130
RWO R4120
Plastic Handle
115
50
R4100
RWO QRH Quick Release Hooks ▪▪Stainless steel and glass filled nylon construction ▪▪Suitable for any trapezing boat ▪▪Push button release ▪▪Fits existing harnesses ▪▪Choice of frame mounts and hook attachments ▪▪Works facing up or down ▪▪Use 40mm webbing
R4028
R4020-29
RWO R4020 RWO R4029 RWO R4028
Spreader bar (std), W: 230 x H: 90mm Spreader bar (small), W: 170 x H: 90mm Small plate, W: 90 x H: 95mm
RWO R4023
Hook & retainer (spare)
R4023
RWO Spinnaker Handling The pole end design is critical for function strength and weight, with a fast positive easy catch operation. Fixed mast eyes, crane, guy catcher, uphaul eye and shroud rollers are all manufactured in electropolished stainless steel.
Sailing
Part #
Description
Dia. mm
Length mm
RWO R4220
Pole End for Dinghies
25
35
RWO R4230
Pole End Dinghies/Dayboat
32
37
RWO R4240
Pole End for Dayboat/Small Yacht
38
45
RWO R4250
Mast Eye 5mm Ring
17
-
RWO R4252
Mast Eye 6mm Ring
32
-
RWO R4260
Spinnaker uphaul eye
-
-
R4250
R4230
R4252
RWO
349
RWO FG1 System Furling Gear For dinghies and day boats up to Flying Dutchman size 6 metres. Utilizing either the single or endless line principle (10% reductions for multi-hulls). The FG1 gear has stainless steel spindles and ball bearings to enhance working loads. The drum on the bottom swivels is of moulded acetal, secured to a high grade anodized aluminum body. Both top and bottom swivels have a plastic insert to prevent sail chafe. They have a break strength of 900kgs, (2000lb) and a fork spindle on the drum to fit most stemhead fittings. Endless line furling gear operates by pulling the line to furl. To unfurl uncleat and pull sheet. Part #
R2081 R2070
R2080 R2090
R2082
Description
Length mm
Dia. mm
Pin mm
Break Load Kg
Forestay Guide
-
-
-
-
RWO R2080
Top Swivel
28
10
5
900
RWO R2081
Top Swivel & Guide
28
10
5
900
RWO R2082
Top Swivel
26
5
5
450
RWO R2090
Drum & Fork Endless Line
45
10
5
900
RWO R2200
Drum & Fork Single Line
45
10
5
900
RWO R2070
R4395 R4390
R2200
R4440 R4410 R4415
RWO Rigging Adjusters
Stay adjusters allow wire rigging systems to be altered by means of a clevis pin. All models constructed from stainless steel strip with different sizes and spacings. Pin mm
Length mm
Range mm
# of Adj x Increments
RWO R4390
5
100
48
7 x 8mm
RWO R4395
5
750
806
16 x 5mm
RWO R4410
5
150
76
7 x 13mm
RWO R4415
6
100
80
16 x 5mm
RWO R4440
5
95
57
8 x 8mm
Part #
Sailing
350
RWO
RWO Spar Tangs Stainless steel tangs for permanent anchorage of stays, shrouds, trapeze wire attachments etc. All models are double straps welded together and formed to enclose wire end.
RWO Spar Straps Manufactured in polished stainless steel. The first 4 straps are universal and have a multitude of uses. The legs can be reformed to fit most shapes of spars, whether if be round or square. The R4750 is made of thicker and wider material.
R4620 R4650
RWO Spar Hardware R4870 Vang fitting is robust, trouble free, and will take most standard keys. R4863 Boom slide with generous, strong eye stainless steel to fit underside of most popular booms for block or wire strap attachments. Complete with position fixing screw.
RWO Goosenecks
R4653 R4340
For use on sailboats up to 6 metres (20ft). The compact, robust aluminum 12mm pin and swivel are designed to keep the mast/boom distance to a minimum whilst allowing 200 degree rotation. The various strong stainless steel mounting brackets fit directly to popular (50mm) mast sections but can be reformed to match others. Part #
Description
Length
Aperture
Pin
Fastener
Spar Tangs
RWO R4620
For 5mm wire
25mm
7mm
5mm
6mm
RWO R4621
For 4mm wire
22mm
6mm
5mm
5mm
R4750
Spar Straps
RWO R4650
Boom Bail
75mm
75mm
-
5mm
RWO R4653
Mast/Boom
65mm
60mm
-
5mm
RWO R4654
Maststrap 45°
65mm
60mm
-
5mm
RWO R4750
H/D Boom Bail
78mm
40mm
-
5mm
RWO R4340
Mast Strap Tang
70mm
60mm
5mm
5mm
R4861 R4890
Hardware
RWO R4861
Vang Key Angled Pin
6mm
5mm
RWO R4890
Vang Key Angled Fabricated
5mm
-
RWO R4863
Slide For Boom Groove
5mm
-
RWO R5032
Gooseneck Body 57mm MAX (white)
-
-
Sailing
Boom End Gear
R4863
351
RWO RWO Eyestraps Electropolished pressed stainless steel for all standard eyestraps and forged rod for heavy duty. NOTE: *Also available bulk, just add a T to the part # ie. R2820T. Part #
Description
L mm
W mm
X mm
H (dia.) mm
D mm
Pack
RWO R2820
Deckclip
7
7
19
4
4
4
RWO R2830
Deckclip
10
11
25
5
8
4
RWO R2835
Deckclip
9
10
29
5
6
4
RWO R2841
Deckclip
19
16
38
5
11
2
RWO R2836
H.D. Deckclip
15
11
24
5
8
2
RWO R2828
Spar Clip
6
6
19
4
4
4
RWO R2838
Spar Clip
6
10
25-32
5
8
4
RWO R2848
Spar Clip
14
18
50-57
5
11
2
RWO R2811
Corner Clip
6
6
5
4
-
4
RWO R2812
Corner Clip
10
10
8
5
-
4
RWO R2813
Corner Clip
16
11
16
5
-
2
RWO R2851
Eyemount
9
-
19
4
5
4
RWO R2849
Eyemount
6
-
18
5
8
4
RWO R2850
Eyemount
11
-
28
5
8
4
RWO R2852
H.D. Eyemount
12
-
26
5
9
2
RWO R2861
Offset Clip
11
5
10
4
-
4
RWO R2862
Offset Clip
16
6
13
5
-
4
RWO R2863
Offset Clip
25
10
16
5
-
2
RWO Hooks
R2836
R2828
R2811
R2851
R2861
RWO Clip
Highly polished, stainless steel. RWO R8430 RWO R8440
R2820
Electropolished stainless steel.
5mm opening 6mm opening
R2900
Part #
RWO R2452
Dia. mm
Length mm
Break Load Kg
5
33
350
R2907
R2903
RWO Hooks Polished stainless steel or plastic construction. S/S, 6mm opening (10 pkg) Black nylon, 4 mm opening (4 pkg)
Unique nylon holders for stowing halyards & lines RWO R2907 Rope Tidi, Black (2 pkg) RWO R2908 Rope Tidi, White (2 pkg)
Sailing
RWO R2900 RWO R2903
352
RWO
RWO Rigging Links
RWO Clevis Pins
Electropolished stainless steel. Comes complete with clevis pin & safety ring.
An economical solution for joining plates and assemblies together. The length is from the underside of head to nearside of hole. All manufactured from stainless steel. Sold in packs of 10. *Also available bulk, just add a T to the part # ie. R6631T.
Pack
Pin mm
Width mm
Length mm
Break Load Kg
RWO R6230
4
5
10
13
770
RWO R6240
4
5
13
11
770
RWO R6330
2
5
10
25
907
RWO R6340
2
5
13
24
907
RWO R6350
2
5
16
22
907
RWO R6353
2
5
25
22
600
RWO R6380
Each
5
16
38
725
RWO R6390
Each
5
25
38
725
Part #
RWO Swivels These plain bearing swivels are ideal for lighter application and all are supplied complete with clevis pin, rings and split pins. Dia. mm
Width mm
Length mm
Break Load Kg
RWO R6363
5
10
32
545
RWO R6364
5
6
28
800
Part #
RWO Safety Rings Use when clevis pins are being constantly repositioned, whereas a split pin should be used on more permanent applications. Manufactured from stainless steel. Also available bulk, just add a T to the part # ie. R6590T Part #
Pack
Dia. mm
Clevis Dia.
RWO R6590
10
11
4+5
RWO R6600
10
14
5+6
RWO R6604
10
19
6+8
RWO R6607
10
23
8 + 12
Manufactured from stainless steel. *Also available bulk, just add a T to the part # ie. R1811T
Sailing
Part #
Length
5
10
RWO R6631
5
13
RWO R6641
5
16
RWO R6651
5
19
RWO R6661
5
22
RWO R6731
5
30
RWO R6741
5
45
RWO R6671
6
12
RWO R6673
6
19
RWO R6681
6
27
RWO R6683
6
32
RWO R6709
8
32
RWO Rope Stoppers A convenient way of tidying knots (which can be hidden within the recess of the molding), also assist in pulling the line, and the bright colours act as identification. They can also be used as parrel beads on standing wire rigging as sail protectors and port and starboard identification. *Two per package. NOTE: Also available bulk, just add a T to the part # ie. R1901T. Small 4mm
RWO Standup Springs
Part #
Dia. mm
RWO R6621
Pack
Description
Height
Dia.
RWO R1811
2
Blocks to 19mm
3/4”
23/32”
RWO R1812
2
Blocks to 25mm
1”
3/4”
RWO R1813
2
Blocks to 57mm
1-3/4”
1”
Medium 6mm
Large 8mm
Colour
RWO R1901
RWO R1991
RWO R1911
Black
RWO R1902
RWO R1992
RWO R1912
White
RWO R1903
RWO R1993
RWO R1913
Red
RWO R1904
RWO R1994
RWO R1914
Green
RWO R1905
RWO R1995
RWO R1915
Blue
RWO R1906
RWO R1996
RWO R1916
Orange
RWO R1907
RWO R1997
RWO R1917
Fl. Pink
RWO R1908
RWO R1998
RWO R1918
Yellow
RWO Nylon Hooks Sold by the each. RWO R8400T RWO R8401T
4mm, White open 6mm, White open
RWO R8404T RWO R8405T RWO R8406T RWO R8407
4mm, Black spring 6mm, Black spring 8mm, Black spring 10mm, Black spring, 2/pkg
RWO
353
RWO Burgees & Pennants Lightweight burgees with nylon bearing frame mounted on a fine stainless pivot staff. Light, well balanced and extremely sensitive with pennants made in variety of bright random colours from Rip-stop spinnaker nylon. Height mm
Arm mm
Staff mm
Mount
RWO R7494T
90
125
407
R7651
RWO R7495T
125
190
407
R7651
RWO R7496T
125
180
445
R7651
RWO R7630
165
210
-
-
RWO R7640
30
340
-
-
RWO R7641
5
125
-
-
Part #
Shape
Parts:
RWO R7651 RWO R7640
RWO R7641
RWO R7630
Pennant Mastclip Shroud Tell-Tales Supplied in pairs red and green with velcro shroud fixing. Sail-Tell-Tales Secured to the sail by self- adhesive discs. These tell tales accurately indicate airflow over the sails and improves trim, pack of 6. Protest Flag Code Flag B in bright red nylon with convenient velcro fastening.
RWO TYGA Ties Versatile general purpose cleats designed specifically for use with shockcord, giving single handed adjustment. Manufactured from lightweight red plastic, these fittings have unlimited uses. RWO R8030
10mm, 2/pkg
RWO Sail Stickers Self adhesive and colourful PVC sticker cards with waterproof self adhesive back. International codes 170 x 100mm with I.D. & meaning RWO R7340
Adjuster strip, Small 130 x 8mm (10mm calibrated scale) RWO R7350
RWO R7351
Please ask for a RWO Catalogue for a full listing of products
Sailing
Adjuster strip, Large 270 x 20mm (25mm calibrated scale)
354
Selden / Boomkicker / Spartite
Selden
Seldén carbon spars are manufactured on a state-of-the-art CNC filament winding machine offering the best low weight, engineered carbon spars.
The Seldén spar range is internationally known as the leading dinghy performance spar product, winning more World titles than any other manufacturer over the last 30 years. Working hand-in-hand with the worlds top sailors, carefully analysing their input and feedback, enables Seldén to produce the ultimate dinghy rig for every boat. Innovative design, attention to detail, advanced testing and manufacturing, combined with an open ear towards the dinghy sailing community, have won Seldén the trust of all dinghy sailors the world over
Tapered spinnaker poles are offered in both 38mm and 42mm centre diameter, tapering down to 25mm at each end. This gives maximum stiffness in the area of maximum load, yet keeps the pole down to minimum weight.
Custom Poles & Masts Available by Special Order
Boomkicker
Boomkicker Boom Supports by Seoladair
Boomkickers are the simple, affordable solution to supporting the boom and eliminating the chafe, hang-ups and adjustments of a topping lift. Boat performance is improved with less weight and windage aloft. In light air, lifting the boom opens the leech for a faster sail shape and more speed. Reefing is safer and easier with better boom control. The simple design eliminates friction and sliding parts. Flexing spring provides fast response and a near constant force for higher vang efficiency. Mast fitting slides in the luff groove to eliminate drilling in the mast. Easy installation independent of the vang with no need to replace existing hardware. Fittings, fasteners, drill and tap included for a complete package. Suggested Boat Size
Initial Pin to Pin
Minimum Pin to Pin
Maximum Force 1
SEO K0750
19 - 25’
36”
26”
250 lbs
11” - 6”
SEO K0800
25 - 27’
45”
35”
300 lbs
15” - 6”
SEO K1000
25 - 30’
45”
35”
400 lbs
15” - 6”
SOE K1250
30 - 34’
53”
43”
500 lbs
16” - 9”
SEO K1500
30 - 38’
53”
43”
600 lbs
16” - 9”
Part #
Stroke Initial 2 Min. 3
1. At Maximum pin to pin length 2. Maximum stroke at initial pin to pin 3. Maximum stroke at min. pin to pin. Stroke is travel when flexed. 1” of stroke equates to approximately 7” at the aft end of the boom. Spartite
Sailing
Kit Includes: The solution to securing & sealing masts at deck level
Spartite Mast Wedge Replacement System
Pre-measured Spartite cans Modelling clay Foam support strips Pouring cup Stirring sticks Plastic gloves Petroleum Jelly
The Spartite ring shrinks less than one thousandths of an inch, and when installed properly will radically reduce or eliminate leaking at the partners. Spartite ensures secure and correct mast position in the partners all season and makes correct placement of the mast in the partners automatic whenever the mast is re-stepped. This is an exceptional feature for racers who trailer to regattas, sailors who remove their spars annually, and boats with unique rig placements. Spartite is a pre-measured two part polymer poured into the cavity between the mast and the partners while the mast is in the boat. Each kit comes with complete instructions and materials for the yard or yacht owner to build a simple mold out of even the most complex partners or mast collar. Spartite makes a one piece perfect fitting mast chock that replaces archaic wedges. SPA 2000-KIT1 SPA 2000-KIT2
51 cu. in.(836 cu cm) 102 cu. in (1672 cu cm)
Safety Lines
Knee Pads Foil & Wing PFDs
Deckvest Lite
Deckvest 5D
Spinlock
it’s your life on the line
356
Spinlock Deckware
▪▪Designed to be fully integrated into the lifejacket system ▪▪The most compact AIS Unit on the market – upto 30% smaller ▪▪AIS unit deploys automatically on lifejacket inflation ▪▪Transmit an alert to all AIS receivers and AIS enabled plotters in the vicinity. ▪▪An additional feature of the MOB1, is its ability to activate the DSC alarm on your vessels VHF ▪▪Integrated strobe light for maximum visibility ▪▪7 year battery life ▪▪24+ hours operational life ▪▪134 x 38 mm ▪▪92 grams ▪▪5 year warranty
W E
Spinlock RescueME MOB1 Features:
N
Communication and Safety at Sea AIS Integrated DSC transmitter 30% smaller (typically) Automatic activation Simple lifejacket integration 7 year battery life 24+ hours operational life 5 year warranty 66 channel GPS
Integrated strobe light
Life jacket mount
Once activated the MOB1 will transmit an alert to all AIS receivers and AIS enabled plotters in the vicinity. The integrated GPS ensures precise location is sent to the vessel and any others that may be assisting.
AIS transmission Transmit Power (EIRP): 1Watt Frequency: 161.975/162.025MHz DSC Transmission Transmit Power (EIRP): 1Watt Frequency: 156.025MHz
E
N
Spinlock Deckvest Lite
Sailing
Now Available
▪▪170N Buoyancy ▪▪Ultra light weight, low profile design ▪▪Straps with soft rear moulding reduce twisting and aid adjustment ▪▪Single crotch strap with recessed clip reduces risk of snagging ▪▪Clipping area for PLB/VHF ▪▪Attachment for kill cord or VHF leash ▪▪Recessed belt clip and webbing end tidy ▪▪One size fits all ▪▪Attachment for Pylon Lite ▪▪Water sensitive activation system ▪▪Uses a compressed paper capsule ▪▪5 year warranty including Through Life Support (TLS) SPI DW-LTE/A SPI DW-LTE/AGP SPI DW-LTE/APB SPI DW-LTE/ASY SPI DW-LTE/ATW
Gun Metal Grenadine Pink Pacific Blue Sumba Yellow Tropic Water
SPI DW-LTE/A-PM SPI DW-LTE/AGP-PM SPI DW-LTE/APB-PM SPI DW-LTE/ASY-PM SPI DW-LTE/ATW-PM
RescueME, Gun Metal RescueME, Grenadine Pink RescueME, Pacific Blue RescueME, Sumba Yellow RescueME, Tropic Water
Parts:
SPI DW-RAK SPI DW-CYD33
Re-arming kit Cylinder only, 33g
with
RescueME MOB1
Pacific Blue Sumba Yellow
Tropic Water Grenadine Pink
Approvals: ISO 12402-3 CE approved USCG approved
Gun Metal
W
Ultra lightweight, low profile lifejacket for sail and power
357
Spinlock Deckware
N W E
5D 170N Series Inflatable/Harness Deckvests
Now Available
Common Features:
▪▪Unique ‘Shoulder Fit System’ flexes & locates ensuring correct fit on shoulders every time ▪▪New back adjustment - hidden and non snag for easy simple adjustment ▪▪High Spec Auto Inflating 170N Lifejacket, fitted with sprayhood ▪▪Pylon Light - High intensity, water activated flashing LED Light ▪▪23cm flexible antenna wand gives improved visibilty above head & water ▪▪Soft loop safety line attachment ▪▪Mesh pocket for VHF/PLB Locator ▪▪Double Crotch Straps / Thigh straps with recessed clips ▪▪Quick Access Emergency safety line cutter ▪▪‘Manual Only’ firing head available (DW-MAK) ▪▪Warranty: 5 years from date of first registration
with
RescueME MOB1
Black
Spinlock Deckvest 5D 170N Pro Sensor ▪▪Water sensitive activation system ▪▪Uses a compressed paper capsule that dissolves and releases a spring to puncture the gas cylinder. (Pro Sensor has indictators to show status of cap and cylinder) ▪▪The cap is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down jacket will not cause activation SPI DW-LJH5D/A1 SPI DW-LJH5D/A2 SPI DW-LJH5D/A3
Chest: 23 - 35.5", Black Chest: 29 - 48", Black Chest: 38 - 59", Black
SPI DW-LJH5D/A1-PM SPI DW-LJH5D/A2-PM SPI DW-LJH5D/A3-PM
RescueME, Chest: 23 - 35.5”, Black RescueME, Chest: 29 - 48”, Black RescueME, Chest: 38 - 59”, Black
SPI DW-LJH5D/A1PB SPI DW-LJH5D/A2PB SPI DW-LJH5D/A3PB
Chest: 23 - 35.5", Pacific Blue Chest: 29 - 48", Pacific Blue Chest: 38 - 59", Pacific Blue
SPI DW-LJH5D/A1TW SPI DW-LJH5D/A2TW SPI DW-LJH5D/A3TW
Chest: 23 - 35.5", Tropic White Chest: 29 - 48", Tropic White Chest: 38 - 59", Tropic White
SPI DW-MAK SPI DW-RAK SPI DW-CYD33
Manual conversion kit Re-arming kit Cylinder only, 33g
Parts:
Pacific Blue
Tropic White Crotch and thigh straps included.
Spinlock Deckvest 5D 170N Hammar
SPI DW-LJH5D/H1 SPI DW-LJH5D/H2 SPI DW-LJH5D/H3
Sailing
▪▪Designed for the Performance/Pro sailor for use in very adverse and extreme conditions; will not accidentally inflate ▪▪The Hammar system is activated by water pressure and will not inflate until the cap is approximately 10cm underwater ▪▪Water, spray and rain running down the vest will not cause activation ▪▪Visible indicators to show the armed status of the cylinder and the firing cap ▪▪Single indicator clearly shows if unit is armed Chest: 23 - 35.5", Black Chest: 29 - 48", Black Chest: 38 - 59”, Black
SPI DW-LJH5D/H1-PM RescueME, Chest: 23 - 35.5”, Black SPI DW-LJH5D/H2-PM RescueME, Chest: 29 - 48”, Black SPI DW-LJH5D/H3-PM RescueME, Chest: 38 - 59”, Black
Parts:
SPI DW-MAK SPI DW-CYD33 SPI DW-RAH/150
Manual conversion kit Cylinder only, 33g Re-arming kit
CE Approved ISO12402-3 Lifejacket ISO12401 Deck Harness
358
Spinlock Deckware N
Spinlock Cento
E W
▪▪Junior 150N catagory Lifejacket Harness (100N actual) ▪▪Compact and lightweight, with body form fitting ▪▪20-50 kgs person weight (Recommended for juniors from 8 to 16 years old) ▪▪Soft loop harness attachment point ▪▪Lightweight, easy adjust belt ▪▪Single crotch straps ▪▪Automatic inflation ▪▪Attachment for Pylon light and sprayhood ▪▪5 year warranty
Spinlock ZERO High Agility Flotation Vests ▪▪Designed for the performance boater ▪▪Low bulk, supple construction ▪▪High stretch two-part dynamic construction for fast, unrestricted movement ▪▪Integrated venting assists the technical breathable clothing systems ▪▪Fast body-fit waist adjusters ▪▪Slimmed foam panel profiling ▪▪Quick draining to reduce wet loading ▪▪Hand warmer pockets ▪▪Easy-access essentials pocket
SPI DW-CEN/APB Pacific Blue SPI DW-CEN/AGP Grenadine Pink
SPI DW-BAM/F1 SPI DW-BAM/F2 SPI DW-BAM/F3 SPI DW-BAM/F4
Accessories:
SPI DW-RAK/100 Cylinder-auto head jr SPI DW-SHD/100 Sprayhood
Front
Chest: 30 - 35” (size 1) Chest: 35 - 40” (size 2) Chest: 40 - 44” (size 3) Chest: 44 - 53” (size 4)
Back
Approvals: ISO 12402-3 ISO 12401 harness CE approved
Spinlock Foil / Wing
Sailing
SPI DW-BA/S1CB SPI DW-BA/S2CB SPI DW-BA/S3CB SPI DW-BA/S4CB
Size 1, Blue Size 2, Blue Size 3, Blue Size 4, Blue
Spinlock Wing SPI DW-BA/S1MR SPI DW-BA/S2MR SPI DW-BA/S3MR SPI DW-BA/S4MR
Size 1, Red Size 2, Red Size 3, Red Size 4, Red ISO 12402-5 CE approved
Buoyancy Aid
W
Spinlock Wing
Pocket
E
Size 1, Black Graphite Size 2, Black Graphite Size 3, Black Graphite Size 4, Black Graphite
Internal Belt
Zero Size Guide
APPROVALS CE approved ISO 12402-5
1 2 3 4 80 cm 31.5”
Spinlock Foil SPI DW-BA/F1BG SPI DW-BA/F2BG SPI DW-BA/F3BG SPI DW-BA/F4BG
N
▪▪Ideal for dinghies, keelboards, RIB’s and watersports ▪▪Foil is a front zip and the wing a side zip style ▪▪Low profile with low snag body fit system ▪▪Tapered high cut for action and mobility ▪▪Internal “GRIP” print ▪▪Stretch outer pocket with internal security pocket ▪▪Dry coated elastic side panels ▪▪Pen pocket ▪▪Articulated back panelling (FOIL) ▪▪5 year warranty
Hand warmer Pocket
90 cm 35.5”
100 cm 39.4”
110 cm 43.5”
120 cm 47.3”
130 cm 51.2”
Chest Measurement
Spinlock LED Pylon Light Fits most brands of inflatable vests. Emergency beacon for improved visability in the water ▪▪23 cm flexible antenna raises LED light above head and water ▪▪Removes 57° head shadow giving a 14% increase in visible light ▪▪Fully sealed LED with a minimum 0.75 Candela for 8+ hours ▪▪Water activation, plus on/off switch ▪▪Can be retro fitted to any inflatable lifejacket with adjusting strap ▪▪Battery life indicator confirms 8 hours or more duration ▪▪Compact low profile sealed lithium battery ▪▪Fitted as standard on Deckvest 5D lifejackets ▪▪5 year self life SPI DW-PY/L1 Approvals: SOLAS, USCG, MED, CDN COASTGUARD AUTHORITY
140 cm 55.2”
359
Spinlock Deckware
Lifejacket Comparison Chart
FOIL & WING
ZERO
DECKVEST LITE
DECKVEST 5D
DECKVEST 5D
DECKVEST 5D
PRO SENSOR 170N
HAMMAR 170N
PRO SENSOR 275N
CENTO
SOLAS
Junior Sailors 20-50 kgs
Superyachts, commercial marine & working near water
Dinghies, keelboats, rib’s & watersports
Performance keelboat, sports boat & class racing sailors
Designed for fastcraft, all sail & power boats. Ideal for inshore & coastal waters
For all sailors who require a lifejacket with deck harness
Sailors or those working in very wet conditions & extended offshore sailing
Commercial & marine professionals
50N Buoyancy
-
-
-
-
-
-
100N Buoyancy
-
-
-
-
-
-
-
170N Buoyancy
-
-
-
-
-
275N Buoyancy
-
-
-
-
-
-
( Twin)
UML Pro Sensor Inflator
-
-
-
-
-
-
Hammar Hydrostatic Inflator
-
-
-
-
-
-
-
UML Mk5 Inflator
-
-
-
-
-
-
Shoulder Fit System™
-
-
-
-
-
Back Adjustment
-
-
-
Simple Chest Adjustment
-
-
Recommended For:
-
-
-
-
-
-
S - XL
1-4
One size
1-3
1-3
1-3
One size
One size
Harness
-
-
-
Sprayhood
-
-
Optional accessory
Optional accessory
Optional accessory
Pylon™ Light
-
-
Optional accessory
Optional accessory
Optional accessory
Mesh Pocket for PRB/VHF
-
-
-
-
-
Clipping Area for Kill Cord/VHF
-
-
-
-
-
-
Crotch/ Thigh Straps
-
-
Safety Line Cutter
-
-
-
-
-
5 Year Warranty
2 year
Through Life Support
-
Body Fit System Sizes
Deckvest Size Guide Cento
Wing & Foil Size Guide
Lite
XS S
1
L
2 3
XL 70 cm 27.5”
80 cm 31.5”
90 cm 35.5”
100 cm 39.4”
110 cm 43.5”
120 cm 47.3”
Chest Measurement
130 cm 51.2”
140 cm 55.2”
50 cm 20”
70 cm 27.5”
90 cm 35.5”
110 cm 43.5”
Chest Measurement
130 cm 51”
150 cm 59”
Sailing
Deckvest 5D
M
360
Spinlock Deckware
Spinlock Deck Pro Harness
Spinlock Performance Safety Lines
▪▪Super light, comfortable and easy to fit ▪▪Wearable with Mast Pro harness ▪▪Instantly fitted unique front opening belt system fits fast and securely first time, using ‘2T’ fastener ▪▪Quick adjust ‘Doubleback’ buckles in stainless steel ▪▪Shoulder straps are shaped towards the centre of the chest, for exceptional comfort and freedom of movement ▪▪Lightweight tether attachment loop ▪▪Knife pouch accessory
▪▪Lighter more compact safety lines for performance sailing ▪▪Ultra compact line version ▪▪Unique FEA-lightened clip; easy action, full strength ▪▪Lightweight looped cow hitch attachment with clip(s) or clip/clip(s) options ▪▪Full strength compact 16mm line 28% lighter than the 25mm standard ▪▪Dry-Coated to prevent water absorption and weight gain ▪▪Overload indicator displays when the load has exceeded 500kgs to show the line needs replacing
SPI DW-DPH Chest: 37.5" - 46.5"
Spinlock Mast Pro Harness ▪▪Secure alternative to a bosun’s chair ▪▪Quick adjust ‘doubleback’ buckles in marine grade stainless steel ▪▪Extra tough IBQ Cordura leg strap covers ▪▪Ergonomic sculptured waist belt and wide leg straps for added comfort & lumbar support ▪▪Neoprene buckle covers to prevent snagging ▪▪Replaceable elastic components ▪▪Tripping spike pocket ▪▪Tool attachment points SPI DW-MPH
Waist: 24" - 40", Leg: 18" - 25"
Spinlock Wrist Support A high strength elastic wrist wrap designed to provide custom support and aid central and lateral wrist stabilization for long periods of time helming and grinding. SPI DW-WSP
Universal, pair
Spinlock Knee Pads ▪▪High density moulded foam provides patella support and protection ▪▪Extra tough IBQ Cordura fabric protection ▪▪Breathable stretch panelling for added comfort ▪▪Ergonomically shaped to maintain position and prevent slipping ▪▪Low volume back panelling prevents bulking
Sailing
SPI DW-KPD SPI DW-KPD/L
Small/Medium, pair Medium/Large, pair
▪▪Single clip, 2m, 208gr SPI DW-STR/2L
▪▪Single clip, elasticated 2m, 210gr SPI DW-STR/2LE
▪▪Double clip, 1 x elasticated 2m, 1 x non-stretch 1m, 370gr SPI DW-STR/3L
▪▪Double clip, 2m SPI DW-STR/02
▪▪Double clip, elasticated 2m SPI DW-STR/02E
▪▪Triple clip, 1 x elasticated 2m, 2 x non-stretch 1m SPI DW-STR/03
By wearing the easily stowed (optional) safety line ‘cutter’, any safety line will satisfy ISAF and ORC recommendations by providing a means of disconnection under load.
Spinlock Cutter & Pouch ▪▪'S-Cutter’ is made for severing safety lines under load by providing a reliable ‘means of disconnection’ ▪▪Anyone wearing the Cutter satisfies ISAF and ORC recommendations, whatever type of safety line and whatever the type of clip used With a guarded razor edge and stowed either in the special pocket on the Deckvest or in a simple pouch worn on the life jacket harness. SPI DW-CTR
Spinlock Deckware
▪▪Smallest pack in the range, suitable for personal essentials ▪▪Lightly padded with structured two way zip for easy access ▪▪Self draining ▪▪Lanyard attachment and key clip for security ▪▪Fits to any belt with secure double fold velcro attachment ▪▪Fits to 2014 Deckvest with toggle attachment point ▪▪H: 160 x D: 60 x W: 160mm
W E
SPI DW-PCS
Spinlock Chest Pack
N
W E
▪▪Lightly padded with structured two way zip for easy access ▪▪Self draining ▪▪Secure water bottle holder and 380ml water bottle included ▪▪Lanyard attachment and key clip for security ▪▪Fits to any belt with secure double fold velcro attachment ▪▪Taped with a reflective strip ▪▪H: 180 x D: 80 x W: 220mm
N
Spinlock Side Pack
361
SPI DW-PCC W E
▪▪Lightly padded with structured two way zip for easy access ▪▪Self draining ▪▪Clear panel window ▪▪Lanyard attachment and key clip for security ▪▪Fits to any belt with secure double fold velcro attachment ▪▪H: 80 x D: 60 x W: 200mm
N
Spinlock Belt Pack
SPI DW-PCB
Sailing
XTR Powerclutch 9
363
Spinlock
Spinlock Powerclutch XCS & XTS Use XTS on yachts that require a higher safe working load and a more advanced release mechanism than the XAS. XCS Aluminum sides for sustained high load operation. Comes in black or white. ▪▪Alloy handle lever with soft end grip ▪▪Secure handle lock in open or close position Part #
Style
Line dia
XTS Series
Max SWL
Fasteners
XCS Series
XTS Series
SPI XTS0610/1
Single
610mm (1/4”-3/8”)
700kg (1,543 lbs)
2 x 5/16” MF
SPI XTS0610/2
Double
610mm (1/4”-3/8”)
700kg (1,543 lbs)
4 x 5/16” MF
SPI XTS0610/3
Triple
610mm (1/4”-3/8”)
700kg (1,543 lbs)
6 x 5/16” MF
SPI XTS0814/1
Single
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
2 x 5/16” MF
SPI XTS0814/2
Double
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
4 x 5/16” MF
SPI XTS0814/3
Triple
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
6 x 5/16” MF
SPI XTS0814/4
Quad
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
8 x 5/16” MF
SPI XTS0814/HP
XTS0814 Horizontal clutch, port
SPI XTS0814/HS
XTS0814 Horizontal clutch, starboard
Part #
Style
Line dia
Max SWL
Fasteners
1200kg (2,640 lbs)
2 x 5/16” MF
XCS Series
SPI XCS0814/1B
Single
8-14mm (5/16”-5/8”)
Parts:
SPI CAM0610 SPI CAM0814 SPI X-HDL
6-10mm Cam module upgrade 8-14mm Cam module upgrade Aluminum handle
Spinlock Powerclutch XX
▪▪Reactor Cam Module - linked base and cam react together in one self contained module ▪▪With ‘reactie clutching’ the holding is consistent across the full diameter range release is smooth and progressive ▪▪Offers signifiant rope holding improvement on the latest small diameter rope types ▪▪Optimised or 10mm line ▪▪Ultra lightweight alloy/composite body ▪▪Handle moves freely to ergonomic position, eady for release ▪▪Reactor cam module is easily removed for on-deck cleaning and servicing ▪▪Fastener locator allows one person installation ▪▪Idential foot print to XTS/XCS up to /3’s ▪▪L: 14.6 x H: 8.4 x W: 3.3 cm
XX holds loads 50% higher than any conventional clutch and yet it is smooth and controlled to release. It is the only secure clutch solution for genoa halyards on inshore racing yachts from 35-50 foot and for secondary applications on larger yachts. XX has been optimized especially for high performance 8-12mm (5/16 - 1/2”) diameters. ▪▪Special 3D wedge action helps contain full load with minimal rope wear ▪▪Peek roller bearings give safe and controlled release ▪▪Monocoque alloy box section for absolute overload security ▪▪Heavy duty low level stainless steel fairleads ▪▪Easy access for removing complete internal assembly, even when banked ▪▪High tensile fasteners supplied ▪▪L: 19.5 x H: 9.6 x W: 4.2 cm ▪▪Max SWL: 1800kg (3,900 lbs)
SPI XTR0812/B Black SPI XTR0812/W White SPI XTR0812/S Silver
SPI XX0812 Single
- Custom Colours Available -
Parts:
SPI XX-JAW SPI XX-KIT
Jaw/roller set for XX0812 Upgrade kit
Spinlock Rope Clutch XA/1 Parts SPI SA16 Handle SPI XA-SIDE Side mount fairing kit
Sailing
Spinlock XTR Reactor Clutch 8-12mm Lines
364
Spinlock
Spinlock Mini Jammer SUA Popular halyard jammer for use with small winches. More power than a cam cleat but much smaller than a powerclutch. ▪▪Polished stainless steel reinforced body ▪▪Low, rounded profile ▪▪No accidental release ▪▪Manual lock down ▪▪Does not replace clutch Part #
Style
Line dia
Max SWL
L x H x W mm
Fasteners
SPI SUA/1
Single
6-10mm (1/4”-3/8”)
400kg (880 lbs)
57 x 46 x 51
4 x #6
SPI SUA/2
Double
6-10mm (1/4”-3/8”)
400kg (880 lbs)
57 x 46 x 69
4 x #6
SPI SUA/3
Triple
6-10mm (1/4”-3/8”)
400kg (880 lbs)
57 x 46 x 86
4 x #6
Spinlock Powerclutch XAS ▪▪Toughened impact resistance ▪▪Modular build: easiest to upgrade & maintain ▪▪Extra clutching and holding power on small diameter lines ▪▪Alloy centre plates share high loads on multiple units Style
Line dia
Max SWL
Fasteners
SPI XAS0408/1
Part #
Single
4-8mm (3/16”-5/16”)
450kg (990 lbs)
2 x #6
SPI XAS0408/2
Double
4-8mm (3/16”-5/16”)
450kg (990 lbs)
4 x #6
SPI XAS0408/3
Triple
4-8mm (3/16”-5/16”)
450kg (990 lbs)
6 x #6
SPI XAS0612/1
Single
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
2 x #6
SPI XAS0612/HP
Single
Pre-assembled with fairing kit for port side
SPI XAS0612/HS
Single
Pre-assembled with fairing kit for starboard side
SPI XAS0612/2
Double
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
4 x #6
SPI XAS0612/3
Triple
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
6 x #6
SPI XAS0612/4
Quad
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
8 x #6
Replacement Parts: SPI CAMXAS Cam SPI SA29 Spring arm SPI XAS-BASE-0408 Base upgrade SPI XAS-BASE-0612 Base upgrade SPI XAS-HDL Handle SPI X-SIDE Side fairings (pair) SPI XAS-SIDE Side fairings (pair) SPI XAS-SMNT Side fairing kit SPI XAS-TAG Coloured handle inserts (4) SPI XLBL Handle label kit
Sailing
Spinlock Winch Release Jammer A radical departure in design from the traditional clutch or jammer aimed squarely at builders of production yachts in the fast growing 38’-50’ sailboat range. The ZR Jammer promotes safer handling of highly loaded lines through a new and simple control mechanism, virtually eliminating the risk of crew injury from accidental release. Instead of a lifting lever its innovative GRIP Switch selects ‘ON’ mode (one-way jamming action) or ‘OFF’ mode (primed for winch release) ▪▪Hold loads up to 1500 kgs (50% more than an XTS) ▪▪Use on the latest high tech lines (10-14mm) ▪▪Weighs 25% less than a typical 800 kg SWL rope clutch ▪▪Controlled release action ▪▪Easy access fastener holes SPI ZR1014
365
Spinlock Spinlock PXR Cam Cleats
Wide operating arc
The three-stage release spring can be pre-set for the prevailing conditions and application. Select lighter settings for continuously trimmed sheets, traveller controls, vangs and similar controls. Harder settings for halyards and occasionally adjusted lines. While sailing, the roller action of the PXR keeps the release effort easy, even as the wind strength increases. The low profile body of the PXR contains hard anodized CAM and base surfaces for maximum grip and durability, whilst stainless steel rope guides provide a wide angle of control, with easy release from any angle.
SPI PXR0206 SPI PXR0810
Roller action maintains easy release as wind load increases
Three stage adjustment
2 - 6 mm 8 - 10 mm PXR0206
T-series versions use the same (27 & 38 mm) hole centres as traditional camcleats, allowing direct retrofit anywhere without drilling. This makes the PXR T-Series ideal for main sheet swivel systems on yachts and keelboats, as well as downhaul, vang and backstay applications. SPI PXR0206/T SPI PXR0810/T
2 - 6 mm 8 - 10 mm
SW-series 2-6 mm size is the preferred swivel mount choice of dinghy manufacturers for single line spinnaker hoists and single cleat control of jib sheets and vangs, whilst the 8-10mm size improves handling on big boat vang and downhaul controls. SPI PXR0206/SW SPI PXR0810/SW
2 - 6 mm 8 - 10 mm
VP-series allows single line control to either side of the boat from its central mast or boom installation. Ideal for mast base mount for catamaran downhauls. SPI PXR0206/VP
T Series
SW Series
2 - 6 mm
0206 Series SWL: 140kg, Break Load: 280kg 0810 Series SWL: 200kg, Break Load: 400kg
Sailing
VP Series
366
Spinlock
Spinlock Spinnaker Blocks This mobile jammer block is for situations where a fixed deck block can’t help: peeling spinnakers, or changing a sheet on a winch. Because it has its own webbing strop, it takes up no deck space and can be repositioned on the toe rail or onto a pad eye. ▪▪Complete with Spectra webbing strop to secure the block to toe-rail or pad-eye ▪▪Strop allows full rotation for spinnaker sheet use or allows it to lie flat on deck ▪▪Integral shock cord holds the block off the deck ▪▪Proven cam profile, holds loads up to 20% of the block’s SWL ▪▪Plain bearing sheave for smooth running at low loads, yet efficient performance at high loads ▪▪No holes in the deck Part #
SWL (Sheave)
Safe Cam Load
50mm
800kg
160kg
63mm
1200kg
240kg
Max. Line
Sheave
SPI BRS/50
6-10mm
SPI BRS/63
8-12mm
The BRS cam action is preset with three useful features: Lock-back, the cam stays clear of the sheet when it is not needed : no accidental jamming. Auto release, the locked cam springs clear of the line for free runout after the sheet is re-tensioned. Friction phase, even if the sheet goes slack or is out of use when the cam is engaged, the cam stays engaged. No more sheets in the water!
Spinlock Sheave Deck Organizers New slimline range for leading lines to the clutch. Good clutches work best with good organizers. The T-Series organizers lead multiple lines back from the mast to XAS or XTS powerclutches. By using efficient bearings and minimizing their overall length, unnecessary friction has been designed out. This all helps reduce winch effort and increase halyard life. All organizer models are designed to be double stacked with other sizes of the same hole centres. Sheave dia.
Max SWL
Total SWL
Line Dia
L x W x H mm
Fasteners
SPI T38/2
Part #
38mm
660kg (1,452 lbs)
600kg (1,320 lbs)
12mm
148 x 38 x 26
#6
SPI T38/3
38mm
660kg (1,452 lbs)
900kg (1,980 lbs)
12mm
191 x 38 x 26
#6
SPI T38/4
38mm
660kg (1,452 lbs)
1200kg (2,640 lbs)
12mm
234 x 38 x 26
#6
SPI T38/5
38mm
660kg (1,452 lbs)
1600kg (3,520 lbs)
12mm
277 x 38 x 26
#6
SPI T50/2
50mm
1000kg (2,200 lbs)
1000kg (2,200 lbs)
14mm
196 x 50 x 29
#8
SPI T50/3
50mm
1000kg (2,200 lbs)
1500kg (3,300 lbs)
14mm
252 x 50 x 29
#8
SPI T50/4
50mm
1000kg (2,200 lbs)
2000kg (4,400 lbs)
14mm
308 x 50 x 29
#8
SPI T50/5
50mm
1000kg (2,200 lbs)
2500kg (5,500 lbs)
14mm
364 x 50 x 29
#8
Replacement Parts: Alloy sheave, 38mm Acetal composite sheave, 38mm Alloy sheave, 50mm Acetal composite sheave, 50mm
Sailing
SPI T38A SPI T38C SPI T50A SPI T50C
Spinlock Micro Organizers Spinlock Bullseyes ▪▪Versatile new solution for low loaded lines, either fitted alone or double stacking onto new T25 organisers ▪▪Successful BE stainless eye construction ▪▪Grouped format minimises the deck space for multiple lines ▪▪Shape deflects easily to fit concave or convex surfaces ▪▪Base detailed for self-sealing gasket or wet silicone deck sealing ▪▪BE10/2’s and 3’s stack anywhere on the T25 organiser providing a very neat new rope management solution SPI BE10/2 Double SPI BE10/3 Triple
▪▪Micro-sized for lightest weight and least deck footprint on small boats up to 28’ using lines up to 10mm ▪▪Composite mouldings - halving the number of diferent parts required to produce all multiple from 2 to 6 x 25mm sheaves ▪▪Stainless steel details add local stiffnes and prevents line abrasion ▪▪Sheave Diameter: 25 mm ▪▪SWL per sheave 400kg SPI T25/2 SPI T25/3 SPI T25/4 SPI T25/5 SPI T25/6
2 Sheave 3 Sheave 4 Sheave 5 Sheave 6 Sheave
Spinlock
367
Spinlock Flush Mount Throttle Control Adapter The ATCU/1 Faceplate is designed to fit with Teleflex model B700, CH2100P and CH2600P. Using ATCU under power is exactly like using a normal throttle lever-except you can remove the handle at any time. Run the engine in neutral simply by pushing the handle inwardswhich disengages the clutch. Return the handle to the minimum throttle position, and it smoothly re-engages. SPI ATCU/1 SPI ATCU/1+ SPI ATCU-LVR
Face plate Face plate & lever Lever only
Spinlock Furling Line Leads Stanchion-mounted furling line fairlead. ▪▪Safe, low-profile design ▪▪Cuts furling line friction ▪▪Fairlead model WL/1 straight line guide for other stanchions ▪▪Sheave model WL/2 for line entry and exit ▪▪Unique tracker-ball angle adjuster for perfect sheave alignment ▪▪Complete with fasteners, easy to fit ▪▪Fits 1” stanchions only SPI WL/1 Bullseye SPI WL/2 Sheave
Parts:
SPI WL-SHEAVE
Replacement for WL/2
Max. Rope
Height
Width
SPI BE06
6mm (1/4”)
22.5
23.6
#8
SPI BE10
10mm (3/8”)
27.5
33.3
#10
SPI BE12** SPI BE16**
Fasteners
Twin fixing 12mm (1/2”)
SPI BE12/TF
33.5
39.5
1 litre 250ml, brush & gloves
Spinlock Winchfeeder
Ideal for keeping long control lines tidy and clear of possible snags. Strongly recommended for coach roof or foredeck applications where line runs between two fixed points with little deflection needed. ▪▪Self aligning until fastened, single or twin screw fixing ▪▪Stainless steel insert
SPI BE10/TF
RP25 is a new brush-on surface coating that protects critical parts of any flexible fibre material from abrasion and UV damage. RP25 impregnates the cover and core to give significant gains in working life and grip, without reducing the flexibility of the rope. Coating a line with RP25 also increases grip and ultimate load holding in any clutch or jammer, for any size of rope, and without increasing its diameter. SPI RP25/L SPI RP25/R
Spinlock Bullseye Guides
Part #
Spinlock Rope Protection
If cross winching is a better option, a line from a clutch on one side can be led quickly and efficiently to a winch on the opposite side via the winchfeeder sheave. Their very low 25mm (1”) profile keeps winchfeeders safely out of the traffic. ▪▪Divert a line to an alternative winch ▪▪Fit retaining clip TWF-RET to keep lines safely in place SPI TWF/50M SPI TWF/63M
50mm, SWL 800 kg 63mm, SWL 1000 kg
1/4”
Twin fixing 16mm (3/4”)
SPI BE16/TF
43.4
50.9
5/16”
Twin fixing
**Limited Quantities
Headsail feeder guides any flaked genoa from the deck cleanly up into the foil. Supplied with a length of line for attachment in a correct, free pivoting position between luff entry and deck. ▪▪Headsail feeder RF/H guides any flaked genoa from the deck cleanly up into the foil ▪▪Both headsail feeders are supplied with a length of line for attachment in their correct free pivoting position between luff entry and deck ▪▪Luff tape protection feature ▪▪Forged 316 stainless steel body ▪▪Graphite loaded, anodised alloy rollers SPI RF/H Headsail SPI RF/MA Mainsail
Sailing
Spinlock Sail Feeder
368
Spinlock / Transat
Spinlock EJB Tiller Extensions Spinlock Tiller Extensions The asymmetric extension improves helming performance, with more feedback for accurate and precise control, maintaining the best helming position for optimum trim and visibility. The two handed helming mode lets the arms relax into a more comfortable, elbows down position, resulting in less fatigue and increased concentration. The Parallel grip EJ has the same features of the Asymmetric, but with a smaller grip. The compact solution for the smaller cockpit and ideal for fast hiking and tacking. ▪▪Push-button adjustment ▪▪Torlon ball locking mechanism ▪▪Stainless steel swivel joint for precise universal movement ▪▪Fast pin for easy stowage ▪▪Integrated shock absorber Asymmetrical ▪▪29-5/8” - 47-1/4”
SPI EA/1200A Amber SPI EA/1200C Citrus SPI EA/1200G Graphite SPI EA/1200S Silver
▪▪23-5/8” - 35-7/16”
SPI EA/900A Amber SPI EA/900C Citrus SPI EA/900G Graphite SPI EA/900S Silver
Parallel ▪▪23-5/8” - 35-7/16”
Sailing
SPI EJ900S Silver SPI EJ900G Graphite
▪▪29-5/8” - 47-1/4”
SPI EJ1200S Silver
Replacement Parts: SPI EJOINT SPI EFASTPIN SPI ECLIP
► Also See
Full swivel joint w/fastpin Full swivel joint release pin Tiller clip
Tiller Extensions pg 294 & 340
▪▪Strong, lightweight anodised aluminium tube ▪▪UV Resistant, extra tough ▪▪Swivels freely through the full 360 degrees ▪▪Spinflex holds tiller in helming position, 30 degrees above horizontal for fast, reactive helming ▪▪Triple-wave handle gives a choice of secure grip positions ▪▪Responsive ‘feel’ and precise helm control ▪▪Less wrist and grip fatigue SPI EJB/600B SPI EJB/900B
600 mm Black 900 mm Black
Replacement Parts: SPI EJB-CLIP SPI EJB-JOINT SPI EJB-KIT
Clip for extension Spinflex joint Extension service kit
Transat
Transat Anodized Aluminum Tubing Sold per foot. (Some minimums apply) TSM HT0010A TSM HT0020A TSM HT0030A TSM HT0040A TSM HT0050A TSM HT0060A TSM HT0070A TSM HT0090A
5/8” x .0509” 1” x .065” 1-1/4” x .065” 1-1/2” x .065” 2” x .065” 2-1/2” x .083” 3” x .083” 4” x .125”
Transat Custom Spinnaker Poles Made to order - Ends not included - comes with trip-line TSM P0030A TSM P0035A TSM P0040A TSM P0050A TSM P0060A TSM P0070A
► Also See
1" x 10’ 1-1/4” x 10’ 1-1/2” x 10’ 2” x 10’ 2-1/2” x 12’ 3” x 14’
Forespar Pole Ends pg 291
369
Tylaska
Tylaska Halyard Shackles Very high strength-to-weight ratio. A captive 17-4PH stainless pin makes for trouble-free operation. The all-metal machined line thimble allows for use as a 2-1 purchase without the wear or melting that occurs with plastic molded thimbles. Lines can also be permanently spliced for a fixed halyard. Tylaska CNC machines the 3D shackles from a solid block of aluminum. Type III hard coat anodizing protects against corrosion. Laser engraving identifies the product without sacrifice to strength or risk of corrosion. A new generation design of the H8 further improves corrosion resistance and provides more thimble bearing area for 2-1 applications. The cross pin is made from 17-4PH to resist wear and bending. The pin is made captive to prevent loss but still allows the full throat width of the clevis. The size was made to fit standard sail headboards without adding any unnecessary weight. Part #
A mm
B mm
C mm
D mm
E mm
F mm
G mm
H mm
I mm
J mm
Working Load kg
Breaking Strength kg
Line Size (mm)
TYL H5
65.3
25.4
4.6
35.6
23.1
16.1
9.5
19.1
19.1
6.6
1,136
2,273
8
TYL H8
80.0
33.4
7.1
38.1
21.6
19.3
14.2
25.4
26.9
8.1
1,818
3,636
12
TYL H12
76.2
38.2
.313
50.8
30.5
22.4
14.3
30.1
28.6
9.5
2,727
5,455
12
Tylaska Trigger Release Shackles T5 Snap Shackles are perfect for small boat applications, J-24s, Mumm 30s and similar boats. T8 Snap Shackles are ideal for the 24 to 36 foot sailboats. T12 Snap Shackles are ideal for 30 to 45 foot boats. Standard Bails provide ample room for attaching a line while keeping weight and overall shackle length to a minimum. Ideal for halyards and sheets. Large Bails provide room for up to three additional shackles or a combination of shackles and lines. Ideal for spinnaker sheets, guys or other multi-line applications A mm
B mm
C mm
D mm
E mm
Thickness mm
Working Load kg
Breaking Strength kg
TYL T5-STD BAIL
14.2
14.2
13.5
14.2
74.6
7.9
1,136
2,273
TYL T8-STD BAIL
17.5
16.7
15.1
16.7
87.3
9.9
4,000
3,636
TYL T8-LRG BAIL
17.5
16.7
24.6
25.4
92.1
9.9
1,818
3,636
TYL T12-STD BAIL
19.1
19.8
19.1
19.1
101.6
11.4
2,727
5,455
TYL T12-LRG BAIL
19.1
19.8
28.6
30.2
114.3
11.4
2,727
5,455
Part #
Tylaska J-Lock Shackle
Hi-tech fid is machined from solid aircraft 6061-T6 aluminum and knurled for a more secure grip. Front taper fits all Tylaska shackles and most other brands. Rear thru hole allows easy attachment of a lanyard. An indispensable tool for fast, safe release of lines under heavy load.
Easily spliced onto Genoa sheets, outhauls and halyards, the new lowprofile Tylaska J-Locks fit through most Genoa blocks for fast sheet changes. Unique patented double-locking plunger locks in two directions for the ultimate in flog-free operation. ▪▪Weight 1.9 Oz (54 gm) ▪▪Work load 4,000 lb (1,818 kg ) ▪▪Breaking strength 8,000 lb (3,636kg) ▪▪Line size 8-10 mm
TYL T5-T12 FID
TYL J8
Sailing
Tylaska Aluminum Fid
370
Wichard
Wichard Twisted Shackles Drop forged 316L stainless steel. Part #
Wichard Self Locking Chain Shackles
WIC 1222
Extra strong, drop forged 316L stainless steel shackles with self-locking feature offering the assurance of no risk of unscrewing. Dia.
I.D.
Breaking Load
WIC 1201
Part #
5/32"
17/32" x 11/32"
1,765 lbs
WIC 1202
3/16"
5/8" x 7/16"
2,645 lbs
WIC 1203
1/4"
25/32" x 1/2"
3,525 lbs
WIC 1204
5/16"
1-1/32" x 23/32"
6,615 lbs
WIC 1205
13/32"
1-5/16" x 7/8"
11,020 lbs
WIC 1206
15/32"
1-17/32" x 1"
13,225 lbs
Long Shackles
WIC 1211
5/32"
7/8" x 11/32"
1,765 lbs
WIC 1212
3/16"
1-5/32" x 7/16"
2,645 lbs
WIC 1213
1/4"
1-5/16" x 1/2"
3,525 lbs
WIC 1214
5/16"
1-25/32" x 23/32"
6,615 lbs
WIC 1215
13/32"
3-1/16" x 25/32"
11,020 lbs
Wichard Wide Shackles
Sailing
Breaking Load
2,645 lbs
WIC 1223
1/4"
1-3/16" x 1/2"
3,530 lbs
WIC 1224
5/16"
1-9/16" x 23/32"
6,615 lbs
Wichard Key Pin Shackles w/ Bar Extra strong, drop forged 316L stainless steel shackles, quick locking with half-turn. Part #
Dia.
I.D.
Breaking Load
WIC 81432
3/16"
1-7/16" x 1/2"
2,645 lbs
WIC 81433
1/4"
1-3/4" x 5/8"
3,745 lbs
WIC 81434
5/16"
2-3/8" x 27/32"
5,510 lbs
Wichard Key Pin Shackles
Part #
Dia.
I.D.
Breaking Load
WIC 1262
3/16"
1-13/32" x 25/32"
1,765 lbs
WIC 1263
1/4"
1-21/32" x 1"
3,300 lbs
WIC 1264
5/16"
2-1/4" x 1-1/4"
5,950 lbs
WIC 1265
13/32"
2-12/16" x 1-9/16"
8,900 lbs
Wichard Bow Shackles Drop forged 316L stainless steel. Part #
I.D.
1-1/32" x 7/16"
Extra strong, drop forged 316L stainless steel shackles, quick locking with half-turn.
Drop forged 316L stainless steel. The only choice for the yachtsman who puts safety first. Features self locking pin which will not loosen, even under the most violent vibrations. Part #
Dia.
3/16"
Dia.
I.D.
Breaking Load
WIC 1241
5/32"
25/32" x 11/32"
1,765 lbs
WIC 1242
3/16"
29/32" x 7/16"
2,645 lbs
WIC 1243
1/4"
1-1/16" x 1/2"
3,530 lbs
WIC 1244
5/16"
1-15/32" x 23/32"
6,615 lbs
WIC 1245
13/32"
1-13/16" x 25/32"
11,020 lbs
WIC 1246
15/32"
2-1/8" x 15/16"
16,535 lbs
Dia.
I.D.
Breaking Load
WIC 1432
3/16"
1-7/16” x 1/2”
2,645 lbs
WIC 1433
1/4"
1-3/4” x 5/8”
3,745 lbs
Stainless Steel
Wichard uses top-quality grades of stainless steel in its products. The first type is a low carbon austenitic steel (316L), which offers good mechanical characteristics. They are nonmagnetic steels and most of Wichard products are manufactured in this grade. The second (17.4PH) is martensitic steel (magnetic), which is referred to as high-resistance steel (HR).
Type
Austenitic
Martensitic
Common name
18.12 Mo
17.4 PH
European standard
X2CrNiMo17-12-2
X5CrNiCuNb 16-4
Us Aisi standard
316 L
630
Composition Carbon
< 0,03 %
< 0,07 %
Chromium
18 %
16,5 %
Nickel
12 %
4%
Molybdenum
3%
-
Copper
-
4%
371
Wichard Wichard Captive Pin Chain Shackles
Wichard Shackler Drop forged 17-4 PH stainless steel with bottle opener.
Extra strong, drop forged 316L stainless steel screw pin shackles with a captive pin that cannot fall out of the body when unscrewed. Self-locking. Part #
WIC 10303
Dia.
I.D.
Breaking Load
WIC 1401
5/32"
1/2" x 5/16"
1,985 lbs
WIC 1402
3/16"
5/8" x 13/32"
3,310 lbs
Wichard Shackler / Spike
WIC 1403
1/4"
25/32" x 15/32"
4,630 lbs
Drop forged 17-4 PH stainless steel.
WIC 1404
5/16"
1-1/32" x 5/8"
8,160 lbs
WIC 10304
WIC 1405
13/32"
1-5/16" x 25/32"
11,465 lbs
Wichard Stainless Steel Eye Straps High strength forged 316L stainless steel.
Wichard Captive Pin Long Shackles Drop forged 316L stainless steel.
Length
Inside
Height
Max. Load
Eye
WIC 9201
1-3/16"
5/16"
7/16"
880
1-3/16"
WIC 9202
1-7/8"
13/32"
1/2"
1,760
1-7/16"
2-1/8"
15/32"
5/8"
2,425
1-23/32"
2-3/8"
5/8"
13/16"
6,170
2-5/16"
Part #
Dia.
I.D.
Breaking Load
WIC 9203
WIC 1411
5/32"
1-7/32" x 5/16"
1,985 lbs
WIC 9204
WIC 1412
3/16"
1-17/32" x 13/32"
3,310 lbs
WIC 1413
1/4"
1-13/16" x 15/32"
4,630 lbs
WIC 1414
5/16"
2-7/16" x 5/8"
8,160 lbs
WIC 1415
13/32"
3-1/16" x 25/32"
11,465 lbs
Part #
Wichard Stainless Steel Eye Bolts Made of drop forged 316Lstainless steel. Metric thread. Shank Dia. x Length
Eye Dia.
Breaking Load
WIC 6490
1/4" x 1-9/16"
15/32"
2,200 lbs
WIC 6491
1/4" x 2-3/8"
15/32"
2,200 lbs
Part #
Wichard Captive Pin Bow Shackles Drop forged 316L stainless steel. Part #
Dia.
I.D.
Breaking Load
WIC 1441
5/32"
11/16" x 5/16"
1,985 lbs
WIC 1442
3/16"
29/32" x 13/32"
3,310 lbs
WIC 1443
1/4"
1-1/16" x 15/32"
4,630 lbs
WIC 1444
5/16"
1-15/32" x 5/8"
8,160 lbs
WIC 1445
13/32"
1-13/16" x 25/32"
11,465 lbs
Extra strong, drop forged 316L stainless steel. Part #
WIC 7304
Wire Dia.
E
P
1/8" - 3/16”
1/2”
1/16”-11/32”
Drop forged 316L stainless steel. Dia.
I.D.
Breaking Load
WIC 1422
3/16"
1-15/32" x 13/32"
3,310 lbs
WIC 1423
1/4"
1-3/4" x 15/32"
4,630 lbs
WIC 1424
5/16"
2-5/16" x 5/8"
8,160 lbs
WIC 1425
13/32"
2-15/16" x 25/32"
11,465 lbs
Hot drop forged, extra strong 17-4 PH stainless steel. Quick release mechanism can be opened manually or using a fid. Part #
WIC 2653
Length
A
B
Break Load
3-3/8"
11/16"
3/8"
2,880 lbs
Sailing
Wichard Trigger Snap Shackles Swivel Eye “HR”
Wichard Captive Pin Twisted Shackles Part #
Wichard Wire Grip
372
Wichard
2474
2476
Wichard Quick Release Snap Shackle “HR”
Wichard Clevis Pin Swivel Snap Shackles “HR”
Use these high quality quick release shackles for any application where releasing under load is required. Ideal for spinnaker handling and towing. Hot drop forged, extra strong 17-4 PH stainless steel.
Hot drop forged, extra strong 17-4 PH stainless steel snap shackles with clevis pin.
Part #
L
A
B
Function
Break Load
WIC 2673
2-3/4"
9/16"
11/32"
2,425 lbs
3,750 lbs
WIC 2674
3-5/32”
5/8”
15/32”
3,525 lbs
5,100 lbs
WIC 2675
3-17/32"
25/32"
1/2"
4,400 lbs
6,600 lbs
Part #
L
Eye Dia.
Breaking Load
WIC 2474
2-3/4”
5/8”
3,750 lbs
WIC 2476
3-7/8”
13/16”
8,550 lbs
Wichard Fixed Eye Snap Shackles Wichard Swivel Eye Snap Shackles “HR”
Hot drop forged, extra strong 316L stainless steel fixed eye snap shackle. Part #
Hot drop forged, extra strong 17-4 PH stainless steel snap shackles with swivel eye. Part #
WIC 2470
L
Eye Dia.
Breaking Load
WIC 2473
2-3/4"
7/16"
4,850 lbs
WIC 2475
3-1/2"
9/16"
8,490 lbs
Length
A
B
Break Load
1-3/8"
1-5/16"
1/4"
880 lbs
Wichard Fixed Eye Snap Shackles A
Hot drop forged, extra strong 316L stainless steel fixed eye snap shackle.
Sailing
Part #
Wichard Carbine Hooks
B
Length
A
B
Break Load
WIC 2471
2"
5/8"
13/32"
4,450 lbs
WIC 2472
2-3/4”
53/64”
33/64”
6,600 lbs
Wichard Large Bail Snap Shackles “HR” Superior steel product, hot forged from high resistance stainless steel. In the event of extreme stress, will deform long before breaking. Will not burst or break suddenly. Hot drop forged, extra strong 17-4 PH stainless steel. Part #
L
A
B
Function
Break Load
WIC 2373
3-1/8"
5/8"
3/4"
2,645 lbs
4,850 lbs
WIC 2375
4-1/8"
13/16"
1-1/32"
3,525 lbs
8,490 lbs
Carbine hooks with torsion spring closures formed 17-4 PH stainless steel. Part #
Stock
Length
Eye Dia.
Break Load
Style
1/4"
2-3/8"
5/16"
1,320 lbs
1
WIC 2315
5/16"
3-5/32"
11/32"
3,550 lbs
1
WIC 2316
13/32"
4"
1/2"
5,500 lbs
1
WIC 2317
15/32”
4-5/8”
11/16”
8,400 lbs
1
WIC 2323
1/4"
2-3/8"
5/16"
1,765 lbs
2
WIC 2325
5/16"
3-5/32"
7/16"
3,750 lbs
2
WIC 2326
13/32"
4"
1/2"
5,730 lbs
2
WIC 2333
1/4"
2-3/8"
13/32"
1,320 lbs
3
WIC 2313
Wichard Opening Pre-Feeder ▪▪316 stainless steel ▪▪One hand open & close ▪▪Eliminates removing headsail from luff groove WIC 7485
373
Wichard
E W
WIC 20705 WIC 21008 WIC 21510 WIC 22014 WIC 22517
N
Wichard Friction Rings 6 ring (7MM ID) 10 ring (9MM ID) 15 ring (15MM ID) 20 ring (20MM ID) 25 ring (25MM ID)
E
N
Wichard Chain Gripper
W
▪▪Forged 316L stainless steel ▪▪Working load: 1590 lbs ▪▪Breaking load: 5290 lbs ▪▪Chain Grip: 5/16" (8mm) ▪▪Length: 103mm
Wichard Toe Rail Pad Eyes Toe rail pad eyes are designed to protect toe rails by spreading the load and reducing nicks and dents. Can be fastened securely to the toe rail. Unscrewing the unit part way allows it to slide, unscrew totally to remove. Designed to fit standard toe rails. Number
Rail Dia. Min-Max
Rail Wall Min-Max
Dia.
Work lbs
Break Load lbs
WIC 16613
3/8" - 1/2"
5/64" - 3/16"
9/16"
2650
6650
WIC 16615
15/16" - 19/32"
5/32" - 1/4"
23/32"
3300
8400
Wichard Folding Pad Eyes
WIC 2985
High strength forged 316L stainless steel. These pad eyes fold down compactly when not in use. Dimensions
Ring Stock Dia.
Eye Dia.
Breaking Load
WIC 6504
1-3/4" x 1-3/4"
1/4"
9/16"
7,715 lbs
WIC 6505
2-5/16" x 2-5/16"
15/16"
3/4"
13,225 lbs
Part #
Wichard Snap Hooks Hot drop forged standard snap hooks with torsion spring closure. 316L stainless steel. Part #
Length
Eye Dia.
Breaking Load
WIC 2480
2"
11/32"
660 lbs
WIC 2481
3"
15/32"
1,765 lbs
WIC 2482
4”
5/8”
3,300 lbs
Wichard Webbing Eye Strap
5/32" diameter 316L stainless steel with a perfect finish for low wear on webs and ropes. Use #8 fasteners. WIC 9211
Wichard Snap Hooks - “HR”
Wichard Water-Tight U-Bolts
Martenistic 17-4 PH steel stainless steel. Part #
Length
Eye Dia.
Breaking Load
WIC 2381
3"
15/32"
1,440 lbs
WIC 2382
4"
11/16"
3,200 lbs
Part #
Wichard Snatch Block
WIC 34500
Length
Break Load
15/32"
1040 kg
Stock
Length
I.D.
Colour
WIC 65331
1/4"
2-3/4"
15/16"
Black
WIC 65431
1/4"
2-3/4"
15/16"
White
Sailing
Single handed operation, snatch blocks are highly useful for taking up a rope that is already reeved. The elastomer moulded cheeks make them shock and scratch-resistant. Each one is fitted with a snap shackle which allows them to move freely in any position. With its forged high-resistance stainless steel arm, the closing system is very strong. It can be opened very easily by pulling on the central plunger pin, as you would do with a normal snap shackle. Part #
High quality stainless steel U-bolt with water-tight rubber collar means no leaks, no noise and no vibration. Eliminates the need for messy silicone sealers in most applications.
Wichard Mooring Hooks This hook and plate can be fitted to any pole. Makes mooring buoy hook-up quick and easy. Stock
Length
B
A
WIC 92327
Part #
15/32"
4-58"
5/8"
1"
WIC 92328
15/32”
6-11/16”
11/16”
1-1/8”
374
Wichard Wichard Jacklines Lyf’Safe by Wichard is a complete jackline kit allowing safer operations and offering added value to the crew. Adaptable and universal
Wichard Boom Brake ▪▪Gybe operations are safer, potential accidents reduced and without jerks with 3 friction positions ▪▪An easy installation on all kinds of boats ▪▪Can be used on main sail areas below 40 sq meters ▪▪Material: anodized aluminium ▪▪Supplied with line WIC 7150
▪▪Lyf’Safe can tailored to the length of the boat (using the adjuster) and can be fitted on to most deck fastenings (padeyes, pulpit/pushpit, cleats)
Ready-to-use
▪▪Easy to install, Lyf’Safe does not require additional fastening components such as shackles
Reflective
▪▪Thanks to its reflective stripe and photoluminescent casing, Lyf’Safe can be easily identified when sailing at night
Wichard Elastic Safety Tethers
Locking system of the webbing
▪▪The adjuster casing prevents any accidental adjustment or release of the webbing
Elastic harness tether, conforms to B.S.1. with 2 stainless steel carbine hooks. Retracts from 2 to 1 meter - break load 4580 lbs.
Resistant and anti-chaffing
▪▪The anti-abrasion edges to the webbing prevent early wear and fraying, the soft elastomer casing isolates the deck, eliminating noise and vibrations
WIC 7001
WIC 7051 WIC 7052 WIC 7053
Retractable tether with 2 double action hooks. Break load 4580 lbs.
Boats to 8.5m, 2/pkg Boats to 11m, 2/pkg Boats to 14m, 2/pkg
WIC 7005
Wichard Colour Glo Rigging Knives
Triple tether has 1- 3ft tether and 1 - 6ft. retractable tether. 3 double action hooks - Break load 4580 lbs.
All these knives have been carefully designed for styling and functionality. For improved usefulness Wichard blades are half serrated. This unique feature permits cutting of heavy material and modern composite rope without dulling the blade. These high-quality stainless steel knives are available in assorted colours. A tremendous value combining strength, corrosion resistance, appealing colour and design. Three styles available.
WIC 7006
▪▪Blade, shackle key w/bottle opener and spike WIC 10062 Fluorescent WIC 10063* Black
▪▪Blade, shackle key w/bottle opener
Wichard Double Action Safety Snaps
WIC 10053* Black
Sailing
The double action feature of this safety snap is easily operated with one hand. Yet absolutely will not open unless this deliberate action is taken. The eye will accommodate either rope or webbing. Part #
L
SWL lbs
Break Load
Colour
WIC 2454
4-17/32"
3300
6,150 lbs
Yellow
WIC 2455
4-17/32"
3300
6,150 lbs
Blue
▪▪Single blade 2-3/4" long WIC 10043* Black WIC 10049* Orange
* Request Items
INDEX: Acc - Blu REFERENCE: Anchor Chart - Rocna............ 215 Anchor Chart - Transat.......... 221 Nova Kool Crossover............ 123 Select the Right Thruster....... 199 Select the Right Windlass..... 208 Wire Rigging Facts................ 280 BLUES SEA SYSTEMS: Automatic Charging Relays..... 32 Battery Management............... 33 Battery Switches...................... 27 Correct Wire Size.................... 47 Fuse and Amperage................ 48 Fuse Holders........................... 49 HARKEN Reference Pages: Block Loading Formulas........ 304 How to Order Battcars........... 335 How to Order Furling............. 328 How to Order Genoa Leads.. 319 How to Order Travelers......... 318
A Access Hatches..................... 156 Adhesive Mounting Plates....... 55 Aerofast................................. 248 Air Conditioning.............. 109-110 Air Heaters............................ 136 Air Purifiers.............................111 Air Scoop Vent Beckson............................. 155 AIS AIS....................................... 64 Antennas.........................94-95 Almo Battery Cable....................... 23 Boat Cable........................... 22 Primary Wire........................ 23 Aluminum Tubing................... 368 AM/FM Antennas..................... 96 Ammeters................................ 43 Anchor Buddy........................ 195 Anchor Marine Step Fenders...................... 194 Stern Fenders.................... 194 Anchor Swivels...................... 195 Anchors Rocna................................. 215 Transat Marine................... 221 Vulcan................................ 215
Antenna Antennas.........................94-97 Connectors........................... 97 Extensions............................ 98 Antenna Mounts Forespar............................. 295 Shakespeare...................97-98 Antifoul Alternative Speed Polish...................... 144 Aqua Signal Docking Lights........................ 4 Interior Lights......................... 5 Navigation Lights.................2-4 Plug Connectors..................... 2 Wireless Remote System....... 5 ARCO Clevis Pins......................... 249 Eyes................................... 249 Forks.................................. 249 Swage Studs...................... 249 T-Terminals......................... 249 Autopilots Furuno.................................. 66 AWAB Hose Clamps............. 138
B Back Plates Blue Wave.......................... 256 Backstay Accessories Johnson.............................. 273 Bags, Harken......................... 337 Bailers................................... 337 Ball Stops, Loos.................... 275 Ball Valves............................. 166 Barometers............................ 232 Barrel Nuts, Beckson............. 156 Battcar Systems.................... 335 Battens, Sail.......................... 337 Batteries, Energy One............. 52 Battery Boxes.......................... 46 Battery Cable........................... 24 Battery Chargers Blue Sea Systems................ 26 EFOY................................... 51 Professional Mariner............ 90 Battery Monitors Magnum..........................78-79 Mastervolt............................. 87 Samllex...........................91-92 Battery Switches.................27-33 Battery Terminals..................... 53 BBQs Dickinson............................ 108 Magma........................ 113-119
375
Beckson Access Hatches................. 156 Barrel Nuts......................... 156 Clips................................... 154 Cup Holders....................... 156 Deck Plates........................ 154 Drain Plugs......................... 156 Drink/Horn Holder.............. 156 Eye Straps.......................... 156 Hand Pumps...................... 157 Log Books.......................... 157 Non-Slip............................. 157 Portlights.....................155-156 Vents.................................. 155 VHF Radio Holders............ 156 Winch Handle Holders....... 156 Beer Glasses......................... 160 Bells, Ship’s........................... 235 Bilge Pump Panel.................... 40 Bimini Supports..................... 174 Bird Repellers........................ 161 Blackout Curtains Waterline Designs.............. 192 Blocks Harken.........................304-315 RWO.................................. 338 Spinlock.............................. 366 Wichard.............................. 373 Blue Sea Systems Add-A-Battery....................... 30 Ammeters............................. 43 Battery Boxes....................... 46 Battery Chargers.................. 26 Battery Switches.............27-33 Bilge Pump Panel................. 40 Breakers..........................38-41 Bus Bars..........................44-45 Cable Caps.......................... 45 Cable Clams......................... 45 Charging Relays..............30-32 Circuit Breakers...............38-41 Fuse Holders...................34-37 Fuses..............................34-37 Indicator Lights..................... 43 Labels................................... 42 Lock Slides........................... 43 Panels.............................40-43 Power Bars & Bars..........44-45 Solenoids............................. 31 Switches..........................38-43 Terminal Blocks...............44-45 Toggle Guards...................... 43 USB Chargers...................... 26 Vessel Systems Monitor....... 39 Voltmeters............................ 43
376
INDEX: Blu - Cus
Blue Wave Architectural................263-265 Back Plates........................ 256 Clevis Pins......................... 259 Eye Bolts............................ 261 Eye Straps.......................... 261 Eyes............................255-258 Forks...................252-259, 265 Lubricant............................ 251 Nuts.................................... 259 Quick Rig Tune (QRT)........ 251 Rigging........................252-262 Shackles......................260-261 Smart Pins.......................... 251 Split Rings.......................... 259 Stemballs........................... 256 Stoppers............................. 263 Swage Eyes & Studs...254-255 Thimbles............................. 260 Toggles........................252-259 T-Rope Eyes...............255-256 T-Terminals......................... 256 Turnbuckles.................252-259 U-Bolts & V-Bolts................ 262 Boat Cable............................... 22 BoatLife Git Rot................................ 140 Graphix Wax....................... 140 Putty................................... 139 Sealants............................. 139 Teak Cleaner & Oil......138-139 BoatMates Cleats................................. 159 Organizers...................158-159 Boats Odyssey............................. 228 Bollards, Clamcleat............... 287 Boom Brakes......................... 374 Boom Vangs, Forespar.......... 293 Boomkickers, Seoladair......... 354 Bosun’s Chair........................ 337 Bottle Openers...................... 239 Bow Thrusters................198-203 Bowl Cleaners, Heads........... 135 Braided Sleeving Techflex.......................100-101 Bronze Wool Shurhold............................. 146 Western Pacific Trading..... 151 Brooms Camco................................ 160 Shurhold............................. 145 Brushes..........................145-146 Buckets, Collapsible Camco................................ 160 Nauticalia........................... 231
Bullseyes RWO.................................. 345 Spinlock.......................336-367 Bungs, RWO......................... 344 Burgees................................. 353 Bus Bars.............................44-45 Bushes, RWO........................ 344 Butyl Tape.............................. 141
C Cable Caps..................................... 46 Clamps................................. 55 Clams................................... 46 Cutters.................................. 57 Diameter Gauge................. 275 Ties....................................... 56 Cam Cleats Harken.........................316-317 RWO.................................. 339 Spinlock.............................. 365 Camco Broom................................. 160 Collapsible Buckets............ 160 Dish Rack........................... 160 Glassware.......................... 160 Plates................................. 160 Camera Mounts..................... 172 Canada Metal Chain.............. 194 Canoe Trolley C-Tug................................. 227 Cap Holder, Harken............... 336 Capstan Maxwell.......................205-208 Captain Tolly’s....................... 140 Captain’s Hats....................... 230 Carabiners Transat Marine................... 178 Wichard.............................. 372 Carbo Racing Foils................ 334 Cards, Greeting..............244-245 Cars Forespar............................. 292 Harken.........................318-322 RWO.................................. 347 Caulking Teakdecking Systems........ 151 CB Radio............................... 105 CD Players.........................67-68 Chafe Protectors Forespar............................. 293 Chain..................................... 194 Chain Gripper........................ 373 Chain/Rope, Maxwell............ 207 Chairs, Garelick..................... 161
Chart Light Aqua Signal............................ 5 IYE..................................... 337 Lunasea............................... 11 Chartplotters.......................59-60 Chocks Forespar......................292-293 Transat Marine................... 181 Circuit Breakers..................38-41 Clamcleats......................283-289 Cleats BoatMates.......................... 159 Clamcleat....................283-289 Folding............................... 274 Forespar............................. 294 Johnson.......................273-274 Marelon.............................. 294 Rail..................................... 273 RWO.................................. 339 Transat Marine................... 181 Clevis Pins ARCO................................. 249 Blue Wave.......................... 259 Johnson.............................. 270 RWO.................................. 352 Clevis Rings Blue Wave.......................... 259 Johnson.............................. 270 RWO.................................. 352 Clinometers Lev-O-Gage....................... 337 Nauticalia........................... 232 Clips Beckson............................. 154 RWO...........................351-352 Wire Rope.................. 180, 371 Clocks.................................... 232 Coat Hooks............................ 243 Cold Cure.............................. 148 Compasses........................... 233 Cone Wedges, Sta-Lok......... 277 Connectors, Electrical........53-56 Cookware....................... 117-118 Cotter Pins............................. 248 Creeping Crack Cure............. 140 Crimpers, FTZ......................... 57 C-Tug..................................... 227 Cup Holders Beckson............................. 156 Boatmates.......................... 158 Railblaza............................ 171 Cushions............................... 241 Custom Spinnaker Poles Transat Marine................... 368
INDEX: Dav - For
D Davit Kits............................... 227 DC Panels..........................40-41 Deck Chairs........................... 161 Deck Fills Marelon.............................. 169 Deck Fittings, RWO............... 346 Deck Labels, RWO................ 353 Deck Lights Forespar............................. 295 Rigid................................18-20 Deck Organizers Harken................................ 315 Spinlock.......................336-367 Deck Plates Beckson............................. 154 RWO.................................. 345 Deck-Guard Bird Repellers... 161 Deckware, Spinlock........356-361 Dehumidifiers Eva-Dry...............................111 Depth Sounders.................59-60 Dickinson BBQs.................................. 108 Heaters............................... 108 Dish Racks Camco................................ 160 Nauticalia........................... 239 Dive Bottle Holders................ 175 Dometic Air Conditioning........... 109-110 Air Purifiers..........................111 Sealand.......................126-134 Ice Makers...........................111 Drain Plugs Beckson............................. 156 Marelon.............................. 169 RWO.................................. 344 Drains, Marelon..............166-169 Drink Holders Beckson............................. 156 BoatMates.......................... 158 Railblaza............................ 171 Drink Protection L’il Sucker Snap Capp........ 245 Dry Bags................................ 337 Duffel Bags............................ 337 Dyform Wire.......................... 278
E EFOY....................................... 51 Electrical AC Panels............................ 41 Battery Switches.............27-33 Bilge Pump Panel................. 40 Blue Sea Systems...........25-49 Breakers..........................38-41 Bus Bars..........................44-45 Circuit Breakers...............38-41 Connectors......................53-56 DC Panels.......................40-41 FTZ..................................53-56 Fuse Holders...................34-37 Fuse Panels....................35-36 Fuses..............................34-37 Panels.............................40-43 Shore Power Connectors..... 99 Solenoids............................. 31 Switches..........................40-43 Tape..................................... 56 Techflex.......................100-101 Wire.................................22-24 Electronics Furuno.............................59-66 Fusion.............................67-73 Hatteland Displays............... 84 Jensen.................................. 73 Maretron..........................81-85 Shakespeare...................94-98 Uniden.........................102-105 Energy One Batteries.............. 52 Engine Room Light.................. 13 Engines, LEHR...............225-226 English Braid Polyester Line.................... 195 Whipping Twine.................. 195 Epifanes................................ 140 Epoxy System Three..............149-151 Teakdecking Systems........ 151 Eva-Dry..................................111 Exit Box, Forespar................. 294 Eye Bolts Blue Wave.......................... 261 Wichard.............................. 371 Eye Straps Beckson............................. 156 Blue Wave.......................... 261 Gloma................................. 299 Harken................................ 301 RWO.................................. 351 Transat............................... 182 Wichard...................... 371, 373 Eyeglass Straps, Harken....... 336
377
Eyes ARCO................................. 249 Blue Wave...................255-258 Sta-Lok............................... 276
F Fairleads Harken.........................302-303 RWO...........................345-346 Spinlock.......................336-367 Fast Pins, Aerofast................ 248 Fender Hangers, Transat...... 221 Fids Samson.............................. 219 Tylaska............................... 369 Fillet Tables........................... 173 Fish Finder Mounts................ 172 Fish Finders........................59-60 Flag Poles, Railblaza............. 175 Flags Burgees & Pennants.......... 353 Pirate.................................. 240 Flashlights Navisafe............................... 17 Rigid..................................... 20 Float Line............................... 212 Floodlights Aqua Signal............................ 5 Lunasea............................... 13 Rigid................................18-19 Flotation Wear................356-361 Flourescent Lights................... 12 Folding Buckets Camco................................ 160 Nauticalia........................... 231 Foot Switches........................ 207 Forespar Antenna Rail Mount............ 294 Boom Vangs....................... 293 Cars.................................... 292 Chafe Protectors................ 293 Chocks........................292-293 Cleats................................. 294 Davit Kit.............................. 227 Deck Lights........................ 295 Exit Box.............................. 294 Jib Roller............................ 293 Lanocote............................ 141 Lightning Master................. 295 Marelon ......................166-169 Marelube............................ 141 Mast Pad Eyes................... 292 Mast Pole Chocks.............. 293 Nash Labels....................... 295
378
INDEX: For - Hul
Forespar cont. Shackle Guards.................. 293 Spinnaker Poles Ends........ 291 Stanchion Mount Chocks... 292 Tea Tree Power.................. 141 Tiller Extensions................. 294 TruPlug............................... 295 Whisker Poles.............290-291 Winch................................. 295 Water Light......................... 295 Forks Blue Wave...........252-259, 265 Sta-Lok............................... 276 Formers, Sta-Lok................... 277 Freezers/Fridges............120-123 Friction Rings........................ 373 FTZ Adhesive Mounting Plates.... 55 Battery Terminals................. 53 Cable Clamps....................... 55 Cable Ties............................ 56 Electrical Connectors......53-56 Heat Shrink.......................... 53 Lugs..................................... 56 Spiral Wrap.......................... 55 Split Loam............................ 55 Tape..................................... 56 Tools................................56-57 Fuel Cell Battery Charger EFOY................................... 51 Fuel Tank Vents..................... 168 Fuel Whistle, Green Marine... 161 Furling Harken.........................327-332 RWO.................................. 349 Furuno AIS....................................... 64 Auto Pilots............................ 66 Chart Plotters..................59-60 Fish Finders....................59-60 GPS.................................59-63 Instruments.....................63-66 Radars.............................59-62 Transducers......................... 65 Fuses Blue Sea Systems...34-37, 203 Holders/Blocks................34-37 Magnum............................... 77 Max Power......................... 203 Panels.............................35-36 Samlex................................. 92 Fusion.................................67-73
G Galileo Thermometers....232-233 Galley Cloths......................... 238 Garelick Deck Chairs............. 161 Gear Bags BoatMates.......................... 159 Harken Sport...................... 337 Giftware, Nauticalia........230-245 Git Rot................................... 140 Glass Bottles & Floats........... 241 Glasses, Drinking Camco................................ 160 Nauticalia....................236-237 Glasses, Reading.................. 231 Gloma Anchor Swivels................... 195 Eye Straps.......................... 299 Shackles......................296-299 Gloves, Sailing...................... 336 GPS Furuno.............................59-63 Maretron............................... 82 GPS Mounts Railblaza............................ 171 Graphix Wax.......................... 140 Grappling Hook..................... 195 Green Marine Fuel Whistle.... 161 Greenfield Anchor Buddy..................... 195 Grappling Hook.................. 195 Greeting Cards...............244-245 Grills Dickinson............................ 108 Magma........................ 113-119 Gudgeons.......................342-343
H Hailers..................................... 98 Halyard Stoppers, RWO........ 352 Handi-Lift............................... 177 Harken Back Stay Adjusters........... 333 Battcar Systems................. 335 Blocks..........................304-315 Cam Cleats.................316-317 Carbo Racing Foils............. 334 Deck Organizers................ 315 Eye Straps.......................... 301 Fairleads.....................302-303 Furling.........................327-332 Hoisters.............................. 336 Pad Eyes.....................300-301
Shackles......................300-301 Stand Up Bases................. 315 Tiller Extensions................. 325 Track.................................. 318 Travelers.....................318-322 Winch Grease.................... 325 Winch Handles................... 325 Winches............................. 326 Harken Sport...................... 336 Harken Sport Bosun’s Chair..................... 337 Cap Holder......................... 336 Eyeglass Straps................. 336 Roll-Top Bag....................... 337 Sailing Gloves.................... 336 Wallet................................. 336 Harnesses, Spinlock.............. 360 Hatch Blackout Curtains............... 192 Lifts..................................... 165 Mosquito Nets.................... 192 Hats & Caps...................230-231 Hatteland Displays.................. 74 Headlamp................................ 17 Heads Bowl Cleaner...................... 135 Sani Pottie.......................... 131 Sealand.......................126-131 Tank Deodorant.................. 135 Toilet Tissue....................... 135 Vacuflush.....................126-129 Heat Shrink.............................. 53 Heat Tools, FTZ....................... 56 Heaters Dickinson............................ 108 Webasto............................. 136 Hoisters................................. 336 Holders Beckson............................. 156 Railblaza.....................170-176 Winch Handle..................... 156 Holding Tanks Indicator............................. 134 Tanks...........................127-133 Treatment........................... 135 Vents.................................. 134 Hooks Mooring.............................. 373 RWO...........................351-352 S-Hooks............................. 180 Snap................................... 178 Hose Adaptors/Fittings Marelon.............................. 167 Sealand.......................133-134 Hose Clamps......................... 138 Hose Nozzle.......................... 146 Hose, Sanitation.................... 134 Hullkote, McLube................... 144
INDEX: Ice - Lun
I Ice Makers..............................111 Inclinometers......................... 232 Inflatable Boats.................................. 228 Navisafe LED Lights........15-16 Railblaza Accessories.171-176 Railblaza Mounts................ 170 Walker Bay......................... 228 Inflatable Vests Re-Arm Kits........................ 165 Spinlock.......................356-360 Inspection Covers, RWO....... 345 Instrument Cover................... 177 Instruments Furuno.............................63-66 Maretron............................... 85 Intellisteer.............................. 163 Inverters Magnum..........................75-79 Mastervolt............................. 88 Samlex............................91-92 iPad Holder............................ 171 iPod Dock Stereos..............67-71 IYE Bailers................................ 337 Mast Rings......................... 337 Reading Lights................... 337
J Jacklines, Wichard................ 374 Jam Cleats, RWO.................. 339 Jensen Sirius Receiver............ 73 Jib Rollers.............................. 293 J-Lock Shackle...................... 369 Johnson Backstay Accessories........ 273 Circular Pins....................... 270 Cleats..........................273-274 Clevis Pins......................... 270 Conversion Sleeves........... 270 Hinged Pad Eye................. 274 Life Line Fittings..........267-272 Link Plates.......................... 272 Safety Pins......................... 270 Sealube.............................. 270 Shroud Cleats ................... 273 Snap Gate Repair Kit......... 267 Spliced Line Fittings........... 274 Stanchion Eye.................... 269 Stay Adjusters.................... 273 Studs.................................. 269 Toggles........................268-272
Turnbuckles.................267-272 Wrap Pins........................... 267
K Kayak Harken Hoisters................. 336 Navisafe LED Lights........15-16 Railblaza Accessories.171-176 Railblaza LED Lights.......... 175 Railblaza Mounts................ 170 Trolley, C-Tug..................... 227 Wall Slings.......................... 175 Key Chains.....................242-243 Knee Pads............................. 360 Knives, Rigging..................... 374
L Labels Blue Sea Systems................ 42 Forespar............................. 295 Lamps.................................... 241 Lanocote................................ 141 Lash-It................................... 218 LED Lights Aqua Signal.........................2-6 Lunasea............................7-13 Navisafe..........................15-17 Plug Light............................. 20 Rigid................................18-20 LEHR Propane Motors...........225-226 Propane Tanks................... 226 Leland Re-Arm Kits........................ 165 Rust Prevention Bags........ 165 Strobe................................. 165 Lenco Hatch Lifts.......................... 165 Trim Tabs.....................164-165 Lev-O-Gage........................... 337 Life Line Fittings.............267-272 Lifesafe Bimini Bandage Tape......... 142 Boat Cover Tape................ 142 Butyl Tape.......................... 141 Hatch Tape......................... 142 Mast Boot Tape.................. 142 Non-Skid Tape.............141-142 Rigging Tape...................... 142 Sail Patch Tape.................. 142
379
Lifevest Pylon Light............... 358 Lightning Master Forespar............................. 295 Lights Aqua Signal.........................2-6 Blue Sea Systems................ 43 Docking............................ 4, 20 Flood.....................5, 13, 18-19 Flourescent.......................... 12 Forespar............................. 295 Forespar Decklight............. 295 Interior Lights..............5, 10-13 IYE..................................... 337 Light Bars............................. 11 Lunasea............................7-13 Navigation.........................2-15 Navisafe..........................15-17 Panel Indicator..................... 43 Plug Light............................. 20 Pylon.................................. 358 Railblaza............................ 175 Reading.......................5, 10-12 Rigid................................18-20 Spreader.............................. 13 Underwater........................... 20 L’il Sucker Snap Capp .......... 245 Link Plates, Johnson............. 272 Locking Wire.......................... 151 Log Books Beckson............................. 156 Loos Ball Stops........................... 275 Cable Diameter Gauge...... 275 Nicropress Sleeves............ 275 Tension Gauges................. 275 Lubricants Blue Wave.......................... 251 Forespar............................. 141 Harken Winch Grease........ 325 Johnson ............................. 270 Lanocote............................ 141 Marelube............................ 141 McLube.............................. 144 Sealube.............................. 270 Shurhold............................. 146 Snap Stick.......................... 146 Lugs, FTZ................................ 56 Lunasea Bulbs.................................7-10 Engine Room Light............... 13 Interior Lights..................10-13 Spot & Flood Lights.............. 13 Spreader Light...................... 13
380
INDEX: Maf - Out
M Maffioli................................... 197 Magma BBQs & Grills.............. 113-119 Cookware.................... 117-118 Umbrellas........................... 118 Magnifying Glasses............... 234 Magnum.............................76-79 Marelon Ball Valves.......................... 166 Cleats................................. 294 Deck Fills............................ 169 Drain Plugs......................... 169 Drains..........................166-169 Hose Adaptors.................... 167 Hose Fittings...................... 167 Seacocks............................ 166 Sink Fittings........................ 168 Strainers............................. 166 Tank Vents.......................... 168 Thru-Hulls....................166-168 Valves......................... 166, 168 Vented Loops..................... 168 Well Drains......................... 169 Y-Connectors...................... 168 Y-Valves............................. 168 Marelube............................... 141 Maretron.............................81-85 Mast Boots, SSI..................... 177 Mast Compound Spartite............................... 354 Mast Hardware IYE..................................... 337 RWO.................................. 350 Mast Pad Eyes, Forespar...... 292 MasterFlush........................... 130 Mastervolt...........................87-89 Mats, Matworks..................... 169 Matworks............................... 169 Max Power Thrusters.....198-203 Maxwell Breaker Panels................... 207 Foot Switches..................... 207 Pressure Arm Kits.............. 207 Remotes............................. 207 Rope/Chain........................ 207 Solenoids........................... 207 Windlasses..................205-208 McLube Hullkote.............................. 144 One Drop............................ 144 Sailkote.............................. 144 Speed Polish...................... 144 Mildew Control....................... 141 Mobri Radar Reflectors......... 169 Mops...................................... 145
Mosquito Nets Waterline Designs.............. 192 Motor Lift............................... 177 Mugs...............................239-237
N Nash Labels.......................... 295 Nauticalia Beanies.............................. 230 Bosun’s Call....................... 235 Bottle Openers................... 239 Canvas Prints..................... 236 Captain’s Hats.................... 230 Chairs................................. 161 Clocks & Barometers......... 232 Coasters..................... 237, 239 Coat Hooks........................ 243 Compasses........................ 233 Cushions............................ 241 Dash Board Pads............... 233 Dish Rack &Trivets............. 239 Drinking Glasses................ 237 Folding Buckets.................. 231 Galley Clothes.................... 238 Games................................ 234 Glass Floats & Bottles........ 241 Greeting Cards............244-245 Hats.............................230-231 Inclinometers...................... 232 Key Rings....................242-243 Lamps................................ 241 Lanyards............................ 235 Laundry Bag....................... 231 Lighter................................ 235 Magnets............................. 243 Magnifying Glasses............ 234 Mugs...........................236-237 Mutinometer....................... 232 Non-Skid............................ 238 Pencil Sharpeners.............. 234 Pirate Flags........................ 240 Place Mats..................237-238 Reading Glasses................ 231 Salt & Pepper Shakers....... 239 Sea-Searcher Magnet........ 231 Sextants............................. 233 Ship’s Bells......................... 235 Socks................................. 230 Telescope........................... 234 Thermometers.............232-233 Towel/Cloths....................... 238 Weather Stations................ 233 Wine Opener...................... 239 Wooden Boats.................... 240
Navigation Lights Aqua Signal.........................2-4 Lunasea............................9-10 Navisafe..........................15-16 Navisafe.............................15-17 Nicropress Sleeves............... 275 Noise Barriers Soundown.......................... 177 Non-Slip Beckson............................. 157 Lifesafe........................141-142 Nauticalia........................... 238 Nova Kool.......................120-123 Novabraid Dinghy Braid....................... 212 Nova Gold.......................... 213 Nova Lite............................ 212 Nova Lite HP...................... 211 Polyspec............................. 211 Shock Cord........................ 213 Spectec 12......................... 212 Sprint Cord......................... 211 XLE Performer................... 210 XLE-Z Feel......................... 212 Nozzles.................................. 146 Nuts Blue Wave.......................... 259 Johnson.............................. 273
O Oarlocks Railblaza............................ 174 RWO.................................. 341 Odour Eliminator Tea Tree Power.................. 141 Odyssey Inflatables Boats................. 228 One Drop, McLube................ 144 Organizers BoatMates...................158-159 Railblaza.....................170-176 Ormiston Dyform Wire....................... 278 Osborn Sail Palms.......................... 213 Sailing Needles.................. 213 Outboard Motors LEHR...........................225-226
INDEX: Pad - Sam
P Pad Eyes Forespar............................. 292 Harken.........................300-301 Johnson.............................. 274 Transat Marine................... 182 Wichard.............................. 373 Panther Rope Cutting Gun.... 213 Pins Circular............... 259, 270, 352 Clevis......... 249, 259, 270, 352 Cotter................................. 248 Fast.................................... 248 Safety................................. 270 Smart.................................. 251 Pintles.............................342-343 Placemats.......................237-238 Plastream Sail Battens.......... 337 Plates, Galley Stack-A-Plate..................... 160 Plug Connectors........................ 5 Plug Light................................ 20 Polycarbonate Glasses......... 160 Portlights........................155-156 Pots & Pans.................... 117-118 Power Bars & Posts...........44-45 Pre-Feeder Spinlock.............................. 367 Wichard.............................. 372 Proctor Spinnaker Poles........ 354 Professional Mariner Battery Chargers.................. 90 Propane Holders............................... 175 Lockers............................... 124 Motors, LEHR..............225-226 Propane Tanks LEHR.................................. 226 Seaward............................. 124 Viking................................. 135 Propellers.......................184-188 Pumps Discharge........................... 133 Hand, Beckson................... 157 Putty...................................... 139 Pylon Light............................. 358
Q Quick Links............................ 179 Quick Pins, Aerofast.............. 248 Quick Release Hooks............ 348 Quick Rig Tune ..................... 251
R Radar Reflectors................... 169 Radars................................59-62 Radex Heater........................ 108 Rail Fittings............................ 183 Railblaza.........................170-176 Reading Glasses................... 231 Re-Arm Kits........................... 165 Refrigerators...................120-123 Remote System, Aqua Signal.... 5 Rescue Tape......................... 144 Resins............................149-151 Rigid LED Lights.................18-20 Rings D-Rings.............................. 181 Round................................. 180 Split.................... 259, 270, 352 Triangle.............................. 181 Rocna Anchors...................... 215 Rod Holders.......................... 171 Rope English Braid...................... 195 Maffioli................................ 197 Nova Braid..................210-213 Sail Twine........................... 219 Samson.......................217-219 Rope & Chain, Spliced.......... 207 Rope Brush........................... 146 Rope Clutches................363-365 Rope Cutting Gun.................. 213 Rope Protection, Spinlock..... 367 Rope Stoppers, RWO............ 352 Rot Fix................................... 150 Rust Prevention Bags............ 165 RWO Blocks................................. 338 Bungs................................. 344 Burgees.............................. 353 Bushes............................... 344 Cam Cleats........................ 339 Cars.................................... 347 Cleats................................. 339 Clevis Pins......................... 352 Clevis Rings....................... 352 Clips............................351-352 Deck Fittings...................... 346 Deck Labels....................... 353 Deck Plates........................ 345 Drain Plugs......................... 344 Eye Straps.......................... 351 Fairleads.....................345-346 Furling................................ 349 Gudgeons....................342-343 Halyard Stoppers............... 352 Hooks..........................351-352 Inspection Covers.............. 345
381
Jam Cleats......................... 339 Mast Hardware................... 350 Oarlocks............................. 341 Pintles.........................342-343 Quick Release Hooks......... 348 Rigging Links...................... 352 Rope Stoppers................... 352 Shackles............................. 352 Sheaves............................. 338 Sister Clips......................... 351 Slides................................. 347 Spinnaker Hardware.......... 348 Standup Springs................. 352 Stay Adjusters.................... 349 Swivels............................... 352 Tiller Hardware............341-343 Trapeze Gear..................... 348 Travelers............................ 347 Webbing Loops.................. 341
S Safety Forespar............................. 295 Mobri.................................. 169 Spinlock.......................356-361 Wichard.......................371-373 Safety Lines Spinlock.............................. 360 Wichard.............................. 374 Sail Feeder Spinlock.............................. 367 Sail Palms............................. 213 Sail Stickers, RWO................ 353 Sail Twine.............................. 219 Sailing Gloves....................... 336 Sailing Needles..................... 213 Sailkote.................................. 144 Salt & Pepper Shakers.......... 239 Samlex Battery Monitors..............91-92 Fuse Kits.........................91-92 Inverters..........................91-92 Remote Panels................91-92 Samson AmSteel Blue..................... 217 Fids.................................... 219 Lash-It................................ 218 MLX.................................... 218 Pro-Set............................... 218 Splicing Manual.................. 219 Starter Cord........................ 218 Ultra-Lite............................. 217 Warp Speed II.................... 217 XLS Extra........................... 218
382
INDEX: San - Sta
SaniPottieToilets.................... 131 Seacocks............................... 166 Sealand Bowl Cleaner...................... 135 Dip Tube Kits...................... 133 Discharge Pumps............... 133 Holding Tanks..............127-133 Hose................................... 134 Hose Fittings...................... 134 MasterFlush....................... 130 Parts................................... 127 Pump Out Adapters............ 133 Relief Valves...................... 133 Sailvac................................ 128 SaniPottie........................... 131 Tank Treatments................. 135 Tank Watch......................... 134 Toilet Tissue....................... 135 Traveler.............................. 131 VacuFlush...................126-129 Vent Filters......................... 134 Sealants BoatLife.............................. 139 Seaward Propane Lockers................ 124 Propane Tanks................... 124 Stoves................................ 124 Water Heaters.................... 125 Selden Spars Spinnaker Poles................. 354 Self-Fusing Tape............. 56, 144 Seoladair Boomkickers.......... 354 Sextants................................ 233 Shackle Guard Forespar............................. 293 Shackle Keys Wichard.............................. 371 Shackles Blue Wave...................260-261 Gloma..........................296-299 Harken.........................300-301 RWO.................................. 352 Titan................................... 220 Tylaska............................... 369 Wichard.......................370-371 Shakespeare AIS..................................94-95 AM/FM.................................. 96 Connectors........................... 97 Extensions............................ 98 Mounts............................97-98 Sirius.................................... 97 Speakers.............................. 98 TV......................................... 96 VHF.................................94-95 Wi-Fi..................................... 95 Sheaves RWO.................................. 338
Sherman Johnson..........267-274 Ship’s Bells............................ 235 Shock Cord............................ 213 Shore Power Smart Plug........................... 99 Shurhold Bronze Wool....................... 146 Brooms & Mops.................. 145 Brushes & Handles.....145-146 Hose Nozzle....................... 146 Rope Brush........................ 146 Snap Stick.......................... 146 Towels................................ 146 Sink Fittings, Marelon............ 168 Sirius Antennas.............................. 97 Receivers............................. 73 Sister Clips............................ 351 Ski Pylon............................... 177 Smart Pins Blue Wave.......................... 251 Johnson ............................. 267 Smart Plug............................... 99 Smartphone Windmeters....... 190 Snap Capp............................ 245 Snap Shackles Transat Marine................... 178 Wichard.......................371-373 Snap Stick............................. 146 Snaps Transat Marine............178-179 Wichard.......................371-373 Snatch Block, Wichard.......... 373 Socks..................................... 230 Solenoids Blue Sea Systems................ 31 Maxwell.............................. 207 Sound Barriers, Soundown... 177 Sounder Mounts, Railblaza... 172 Sounders............................59-60 Soundown Noise Barrier....... 177 Spartite Mast Compound................. 354 Speakers Fusion.............................71-72 Shakespeare........................ 98 Speed Polish, McLube.......... 144 Spinlock Blocks................................. 366 Bullseyes.....................366-367 Cam Cleats........................ 365 Cutter................................. 360 Deck Organizers.........336-367 Deckware....................356-361 Fairleads.....................336-367 Harnesses.......................... 360 Inflatable Vests............356-360 Knee Pads.......................... 360
Pouches............................. 361 Pylon Light......................... 358 Rope Clutch................363-365 Rope Protection................. 367 Safety Lines....................... 360 Sail Feeder......................... 367 Spinnaker Block................. 366 Tiller Extensions................. 368 Winchfeeder....................... 367 Wrist Support..................... 360 Spinlock Deckware.........356-361 Spinnaker Hardware Forespar......................291-293 IYE..................................... 337 RWO.................................. 348 Spinlock.............................. 366 Spinnaker Poles Proctor................................ 354 Selden Spars...................... 354 Tubing................................ 368 Spiral Wrap FTZ....................................... 55 Techflex.............................. 100 Spliced Line Fittings Johnson.............................. 274 Splicing Kit & Manual............ 219 Split Loam FTZ....................................... 55 Techflex.............................. 100 Split Rings Blue Wave.......................... 259 Johnson.............................. 270 RWO.................................. 352 Spreader Light Forespar............................. 295 Lunasea............................... 13 SSI Instrument Cover................ 177 Mast Boots......................... 177 Stainless Outfitters Handi-Lift............................ 177 Sta-Lok Cone Wedges.................... 277 Eyes................................... 276 Forks.................................. 276 Formers.............................. 277 Studs.................................. 277 Stanchion Mount Chocks Forespar............................. 292 Stanchions & Fittings Johnson.............................. 269 Transat............................... 183 Stand Up Bases & Springs Harken................................ 315 RWO.................................. 352 Sta-Plug Forespar............................. 295 Starter Cord........................... 218
INDEX: Sta - Tyl Stay Adjusters Johnson.............................. 273 RWO.................................. 349 Stemballs Blue Wave.......................... 256 Step Fenders......................... 194 Stereos...............................67-73 Stern Fenders........................ 194 Stern Thrusters...............198-203 Stoppers Blue Wave.......................... 263 Johnson.............................. 270 Stoves Seaward............................. 124 Strainers Inlet.................................... 168 Scoop................................. 166 Strobes.................................. 165 Sub Woofers............................ 72 Swage Eyes ARCO................................. 249 Blue Wave.......................... 255 Swage Studs ARCO................................. 249 Blue Wave...................254-255 Johnson.............................. 269 Switches Blue Sea Systems...........40-43 Foot.................................... 207 Toggle................................... 42 Swivels RWO.................................. 352 Transat Marine............178-179 Swivl-Eze Ski Pylon............................ 177 System Three.................149-151
T Tank Deodorant..................... 135 Tape Bimini Bandage.................. 142 Boat Cover......................... 142 Butyl Tape.......................... 141 FTZ....................................... 56 Hatch.................................. 142 Lifesafe........................141-142 Mast Boot........................... 142 Mylar.................................. 177 Non-Skid.............141-142, 157 Rescue Tape...................... 144 Rescue Tape...................... 144 Rigging............................... 142 Sail Patch........................... 142 Self-Fusing................... 56, 144 Tear-Aid.............................. 151
T-Ball Terminals ARCO................................. 249 Tea Tree Power..................... 141 Teak Cleaner BoatLife.............................. 139 Teakdecking Systems........ 151 Teak Oil, BoatLife.................. 139 Teakdecking Systems............ 151 Tear-Aid................................. 151 Techflex..........................100-101 Telescopes............................ 234 Tension Gauges, Loos........... 275 Terminal Blocks..................44-45 Tethers Spinlock.............................. 360 Wichard.............................. 374 Thermometers Magma............................... 118 Nauticalia....................232-233 Thimbles Blue Wave.......................... 260 Transat Marine................... 181 Thru-Hull Plug....................... 295 Thru-Hulls.......................166-168 Thrusters Max Power..................198-203 Tiller Extensions Forespar............................. 294 Harken................................ 325 RWO.................................. 340 Spinlock.............................. 368 Transat Marine................... 340 Tiller Hardware, RWO........... 341 Titan Shackles....................... 220 Toggle Switches...................... 42 Toggles Blue Wave...................252-259 Johnson.......................268-272 Toilets Bowl Cleaner...................... 135 Sani Pottie.......................... 131 Sealand.......................126-131 Tank Deodorant.................. 135 Toilet Tissue....................... 135 VacuFlush...................126-129 Tools FTZ..................................56-57 Techflex.............................. 100 Top Fittings Transat Marine................... 183 Towel/Cloths.......................... 146 Track Harken................................ 318 RWO.................................. 347 Transat Marine Aluminum Tubing............... 368 Anchors.............................. 221 Carabiners.......................... 178
383
Chocks............................... 181 Cleats................................. 181 Custom Spinnaker Poles.... 368 Deck Hinges....................... 182 Fender Hangers................. 221 Motor Lifts.......................... 177 Pad Eyes............................ 182 Quick Links......................... 179 Rail Fittings........................ 183 Rings...........................180-181 Snap Shackles................... 178 Snaps..........................178-179 Stainless Wire.............278-279 Swivels........................178-179 Thimbles............................. 181 Tiller Extensions................. 340 Top Fittings......................... 183 Wire Rope Clips................. 180 Transat Stainless............178-183 Transducers Furuno.................................. 65 Maretron............................... 82 Trapeze Gear, RWO.............. 348 Travelers Harken.........................318-322 RWO.................................. 347 Trim Tabs........................164-165 T-Rope Eyes ARCO................................. 249 Blue Wave...................255-256 T-Terminals ARCO................................. 249 Blue Wave.......................... 256 Tube Clips Beckson............................. 154 RWO.................................. 341 Tubing, Aluminum.................. 368 Turnbuckles Blue Wave...................252-259 Johnson.......................267-272 Turning Point Props........184-188 TV Antennas............................ 96 Tylaska Fids.................................... 369 Halyard Shackles............... 369 J-Lock Shackle................... 369 Release Shackles.............. 369
384
INDEX: Ubl - Yva
U U-Bolts Blue Wave.......................... 262 Wichard.............................. 373 Umbrellas, Magma................ 118 Underwater Lights Plug Light............................. 20 Uniden CB Radios.......................... 105 VHF Radios.................102-105 USB Chargers Blue Sea Systems................ 26
V Vaavud Windmeter................ 190 VacuFlush.......................126-129 Valves Ball Valves.......................... 166 Marelon...................... 166, 168 Varnishes Epifanes............................. 140 V-Bolts................................... 262 Vent Filters, Heads................ 134 Vented Loops........................ 168 Vents Beckson............................. 155 Tank.................................... 168 Vessel Systems Monitor.......... 39 VHF Antennas.........................94-95 Holders....................... 156, 171 Uniden.........................102-105 Viking Propane Tanks............ 135 Voltmeters............................... 43 Vulcan Anchors...................... 215
W Walker Bay............................ 228 Wall Sling............................... 175 Wallet Harken................................ 336 Water Heaters Seaward............................. 125 Water Light Forespar............................. 295 Waterline Designs Blackout Curtains............... 192 Mosquito Nets.................... 192
Weather Station Furuno.................................. 64 Maretron............................... 82 Nauticalia........................... 233 Weatherflow Windmeter........ 190 Webasto Air Heaters......................... 136 Webbing Loops RWO.................................. 341 Wichard.............................. 373 Well Drain.............................. 169 Western Pacific Trading Bronze Wool....................... 151 Locking Wire...................... 151 Whipping Twine............. 195, 219 Whisker Poles................290-291 Whistles, Bosun’s.................. 235 Wichard Boom Brake....................... 374 Carabiners.......................... 372 Chain Gripper..................... 373 Eye Bolts............................ 371 Eye Straps.................. 371, 373 Friction Rings..................... 373 Hooks..........................371-372 Jacklines............................ 374 Knives................................ 374 Mooring Hooks................... 373 Pad Eyes............................ 373 Pre-Feeder......................... 372 Safety Snap........................ 374 Shackle Keys..................... 371 Shackles......................370-371 Snap Hooks.................371-372 Snap Shackles............371-372 Snaps..........................371-373 Snatch Block...................... 373 Tethers............................... 374 U-Bolts............................... 373 Wire Rope Clip................... 371 Wi-Fi Antennas........................ 95 Winch Grease........................ 325 Winch Handles Harken................................ 325 Holders............................... 156 Winches Forespar/Marelon............... 295 Harken................................ 326 Winchfeeder.......................... 367 Wind Instrument Furuno.................................. 66 Maretron............................... 82 Vaavud............................... 190 Weatherflow....................... 190 Weatherhawk..................... 191 Windlasses Maxwell.......................205-208
Wine Glasses.............................. 160 Opener............................... 239 Wire Battery Cable....................... 24 Boat Cable........................... 22 Locking Wire...................... 151 Ormiston Dyform................ 278 Primary Wire........................ 24 Rope Clips.................. 180, 371 Stainless......................278-279 Transat Marine............278-279 Wire Chart.......................... 280 Wire Rope......................278-279 Wire Rope Clips Transat............................... 180 Wichard.............................. 371 Wireless Remote System.......... 5 Wireless Steering Intellisteer........................... 163 Wooden Boats....................... 240 Wrap Pins...................... 251, 267 Wrist Support......................... 360
Y Y-Connectors Marelon.............................. 168 SeaLand............................. 134 Y-Valves................................. 168
