Transcript
TokiLux Wall Grazer TM
New from Tokistar
TOKISTAR® LIGHTING INC.
TokiLux WG TM
T
0°
30°
okiLux has now been fitted with an optics package making the system ideal for use as a wall-grazing luminaire. Our 18˚ x 48˚ spread lens delivers an evenly distributed wash of light to surfaces over greater distances.
30°
60°
60°
90°
90° 120°
150°180° 150° 120°
TokiLux WG offers optional channels to enhance performance. Optional channels may be specified with fixed or adjustable mounting brackets to target and precisely focus light where needed. A linear glare guard prevents LEDs from being seen from below.
Parallel louvers prevent glare from side-viewing perspectives.
How To Specify TokiLux WG comes with 8" light bars inserted into a track. Each light bar consumes 4.0 watts, and up to 24 may be connected to a single power supply/dimmer.
TLXWG - 2700
TLXWG - CH - 2700 - AB Extrusion Style
Code
Color
2700 3000
285 Lm 300 Lm
2700K 3000K
LED
Mounting
Code
Style
Code
Lumens Per Foot
Color
Code
Style
CH CHV
Channel Channel with Parallel Louvers
2700 3000
285 Lm 300 Lm
2700K 3000K
FB AB
Fixed Adjustable
LED Lumens Per Foot
Fixed
Adjustable
1.68" (42.7 mm)
1.50" (38.1 mm) 0.67" (17 mm)
0.73" (18.5 mm)
1.56" (39.6 mm)
1.00" (25.4 mm)
TLXWG SERIES
TLXWG-CH SERIES
TLXWG-CHV SERIES
(Shown with Mounting Clamp)
(Shown with Fixed Bracket)
(Shown with Adjustable Bracket)
Accessories Feed Connector
End Cap
Flex Connector
Mounting Clamp
Part#: TLXWG-FLC
Part#: TLXWG-CP
One Feed Connector can power up to 24 Light Bars.
An End Cap is required at the end of a fixture run.
Flex Connectors interconnect fixtures up to 24 Light Bars,
TokiLux Basic WG is installed with Mounting Clamps.
Part#: TLXWG-CON
Part#: TLXWG-ED
turn corners and enable smaller sections to conform to curves.
Power Supply LDR24-4A LED Driver
Tokistar’s LDR24-4A is a 96 Watt Class 2 LED Driver used to convert an AC input into a 24VDC output. It may be operated from a wide range of input voltages.
2.46" (63 mm)
7.68" (195 mm)
1.60" (41 mm)
Dimming Systems Optimum dimming results are achieved by using our PWM systems shown below. This ensures full-range dimming with flicker-free operation at all dim levels. Magnetic transformers are also dimmable with the appropriate style of dimmer, but not all will show favorable results at lower dim levels.
LC-1CH-MULTI Dimming System /24VDC Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible with industry-standard dimmers working on DMX, 0/1-10VDC or PWM protocol. In the manual mode, a preset light level can be set without the use of an external dimmer. Part #: LC-1CH-MULTI Technical Specifications: Max. Load: 96 Watts @ 24VDC Environmental Rating: Dry Location/IP20 Dimensions: 3/4" x 1-3/4" x 3-1/2" Weight: 50g / 0.11 lbs Listing: ETL Listed/CE Certified Operating Temperature: 0~+50ºC
DMX Wiring Diagram
DMX Console
Fixture
Fixture
0-24 VDC
0-24 VDC
Dimmer Pack
Dimmer Pack
24 VDC
LED Driver DMX Out
DMX In
LED Driver
24 VDC
DMX Out
LC Dimming System This proprietary dimming system provides full-range dimming of LEDs from our LDR24-4A LED Driver. Up to 25 dimmer packs may be connected in series with CAT5 Cable. The LC-DMR has a rotary dial and on/off switch.
LC-DMR Fixture
Fixture
0-24VDC
0-24VDC
Signal Out
Dimmer Pack
24VDC
Part #: LC-DMR
LED Driver
Signal Out
Dimmer Pack
24VDC
LED Driver
Part #: LC-1CH-DP
TOKISTAR® LIGHTING INC. 1015 E. Discovery Lane • Anaheim, CA 92801 Tel: 714.772.7005 • Fax: 714.772.7014 • Toll free in USA: 877.340.7633 Email:
[email protected] • Website: w w w.tokistar.com
