Transcript
139
Microducts
tOOLS
OPTOCODE L1160
TOOL KIT EMT-9087
FEATURES: • includes standard tools and tools dedicated for blown fibre technology • designed to assure ease of use and installer safety • the use of correct tools allows the best possible performance and lowers the installation time • each tool from the tool kit is available separatelly • cutters and strippers for various diameter ranges also available
TECHNICAL SPECIFICATIONS: Tool Kit
Item
symbol
description
lp.
symbol
description
1.
EMT-9087
Tool box
10.
EMT-7299
Microduct Rotational Cutter
2.
EMT-9728
Sheath Stripper (4.5-40) mm
11.
EMT-9346
42 mm Heavy Duty Cutter
3.
EMT-7794
Metal free cutter for 1DB
12
EMT-9345
Screwdriver Pack
4.
EMT-9344
Diagonal Cutters
13.
EMT-7298
Junior Hacksaw
5.
EMT-7301
Pliers Square nose
14.
EMT-7041
Flexible Saw
6.
EMT-7069
Trimming Knife
15.
EMT-7300
Sash Tool Brush
7.
EMT-7001
Longitudinal Sheath Stripper
16.
EMT-7949
Microduct Rounding Tool
8.
EMT-7071
Rotational Sheath Stripper
17.
EMT-7236
Collet Locking Tool
9.
EMT-7093
Scissors
18.
EMT-7014
Primary Tube Cutter 12.7mm
EMT-9728
EMT-7794
Sheath Stripper (4.5-40) mm (EMT-9728) • capable of making circumferential cuts on cable and microducts • plastic bodied with a spring loaded “V” anvil to attach it to the cable • adjustable cutting blade for depth with a capacity of 4.5 to 40 smm
EMT-9344
Metal free cutter for 1DB (EMT-7794) • designed to remove the outer jacket from a 1 way DB 5 mm tube assembly
Diagonal Cutters (EMT-9344) • provides clean cutting of metal products, Direct Bury sheaths and fillers
EMT-7301
Pliers Square Nose (EMT-7301) • Small combination pliers with cutter
Trimming Knife (EMT-7069)
EMT-7069
• an ergonomically designed handle allows safer operation • available without holder
Longitudinal Sheath Stripper (EMT-7001) • allows easy stripping of outer sheaths without damaging the microtubes inside the microduct
Rotational Sheath Stripper (EMT-7071)
EMT-7001
• used for cutting the microduct outer sheath rotationally for gaining access to the primary tubes • suitable for entering the Direct Buried (DB) microducts with outer diameters from 12 mm to 44 mm
Scissors (EMT-7093) • heavy-duty scissors
EMT-7071
• they can cut through foil, sheath, rope, etc.
EMT-7093
140
Microducts
Tools
OPTOCODE L1160
EMT-9087 TOOL KIT
Microduct Rotational Cutter (EMT-7299) • suitable for stripping cable jackets and microduct outer sheaths • allows both longitudinal and circumferential cuts EMT-7299
42 mm Heavy Duty Cutter (EMT-9346) • Heavy Duty Cutter suitable for cutting through the microducts with up to 42 mm outer diameter • allows easy cutting of different kinds of microducts especially Direct Buried • Cutting range is from 10 - 42 mm outer diameter
Screwdriver Pack (EMT-9345) EMT-9346
• a 6 piece set of general purpose screwdrivers • includes: two pozi and four slotted screwdrivers
Junior Hacksaw (EMT-7298) • extremely useful for cutting HDPE sub ducts and tube bundles EMT-9345
Flexible Saw (EMT-7041) • flexible saw for cutting tree roots
Sash Tool Brush (EMT-7300) • suitable for removing dust and dirt from the inside of blowing head or the mating surfaces of a closure
EMT-7298
Microduct rounding tool (x4) (EMT-7949) • used to round microducts with 3 mm, 5 mm and 10 mm outer diameter after cutting and before adding a connector
EMT-7041
Collet Locking Tool (EMT-7236) • this tool ensures that the microduct is correctly locked into the connector
Primary Tube Cutter 12.7 mm (EMT-7014)
EMT-7300
• gives a clean, straight cut to the microduct before inserting into a connector EMT-7949
ORDERING: EMT-7833B - Tool Box Kit
EMT-7236
TELECOM
EMT-7014
ACCESS
CATV
MAN
WAN
ADDITIONAL TOOLS
LAN
FTTx
OPTOCODE L1170
Cable jacket, microduct sheath stripper (EMT-7000) • allows circumferential cuts of a cable jacket or microduct sheath • platic handle with V-shaped cable holder
EMT-7000
• adjustable cutting depths of 4.0 mm to 16 mm • not suitable for Direct Buried microduct outer sheaths EMT-7066
Cable jacket, microduct sheath stripper (EMT-7066) • allows circumferential cuts of a cable jacket or microduct sheath • platic handle with V-shaped cable holder • adjustable cutting depths of 8.0 mm to 28 mm.
PON
Industry
