Transcript
P P
FRAMING STAPLER MODEL S200-S16 Standard Crown (1/2")
TOOL SCHEMATIC AND PARTS IMPORTANT! DO NOT DESTROY
Always refer to safety and operating manuals, #403606, #405218 and #405222 for detailed information on this tool. It is the customer's responsibility to have all operators and service personnel read and understand this information.
1 2 3 4 5 ➔6 * 7 8 * 9 10 11 * 12 * 13 * 14 * 15 16 17 18 * 19 20 * 21 22 23 24 25 * 26 * 27 * 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 * 43 44
501043 500956 091362 092757 501231 514892 404230 501250 091542 404054 404056 090927 092775 092773 404256 500954 015660 403582 405430 501169 403202 501322 402725 405243 501228 402728 091966 500369 501227 500975 501140 501141 402708 501229 402785 402706 091545 501023 500957 500963 097748 097746 092174 026133
1 1 4 4 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 2
T.H.S.C.S. 1/4-20 x 1/2" Cap Diffuser S.H.C.S. 1/4-20 x 1-1/2" Flat Washer Cap Conical Spring Retaining Ring Upper Valve Piston O-Ring Seal, Main Valve Lower Valve Piston O-Ring, Main Valve O-Ring, Main Valve O-Ring, Main Valve O-Ring Post, Main Valve S.H.C.S. 10-24 x 1/2" Driver Blade Nut O-Ring, Piston Piston Driver Blade Sleeve Retainer Seal Sleeve Flange Sleeve Sleeve O-Ring, Sleeve O-Ring, Sleeve O-Ring, Sleeve Bumper Retainer Gasket Cap Logo Housing Left Logo Housing Right Gasket Nose Flange Bumper Seal Driver Blade Flange S.H.C.S. 1/4-20 x 7/8" Grip Handle Housing End Plug Spring Valve Pin Valve Pin O-Ring, Valve Body Roll Pin 1/8 x 1
* **
Denotes normal wear items. Make sure warning label (500459) is properly affixed. Replace if necessary.
▲
Apply Loctite 242 (Blue)
➔
Denotes new change
S200-S16, 501230 45 46 47 48 49 50 51 52 53 ▲ 54 55 56 57 ▲ 58 59 60 61 62 63 64 65 66 ** 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
401958 402668 501008 501010 501009 402669 092037 004502 402781 004224 402743 091534 091532 091568 402796 402797 402798 402799 402740 402780 501226 403427 500459 404698 402730 405079 403206 092176 403205 404232 403204 402734 402792 402629 403716 501780 402736 402738 501320 501243 071297 501299
.060
1 2 1 1 1 1 4 2 1 3 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 2 1 1 1 2 2 1 1 1 1 1 1 2
Valve Body Retaining Washer Trigger Lever Trigger Roll Pin Trigger Pin Locknut S.H.C.S. 10-32 x 5/8" Rail Bracket S.H.C.S.10-32 x 3/8" Pin Negator Drum Drum, Negator Negator Bd. Head Screw 6-32 x 1/4" Follower Retaining Bushing Latch Follower Button Spring Follower Latch Roll Pin 3/32 x 7/16 Pivot Rail Cover Assembly Nameplate Rail & Rail Cover Assembly Warning Label Roll Pin Assembly Pivot Pin Front Guide Spring Front Guide Latch Latch Front Guide Roll Pin 5/32 x 1-3/8" Back Plate S.H.C.S. 8-32 x 13/16" Front Guide Spring Intermediate W.C.E. Hardened Washer S.H.C.S. 10-32 x 5/16" Lower W.C.E. Flat Washer Spring Guide Block Upper W.C.E. Roll Pin 1/8 x 1-1/8" S.H.C.S. 1/4-20 x 1"
AIR CONSUMPTION CHART
.055
AIR CONSUMPTION - SCF /FASTENER
PARTS LEGEND
.051
.050
.045
Fastener sizes: Length: 3/4" to 2" Gauge & Crown: 16 ga. 1/2" Crown
.040
.035
.030
70
80 90 100 110 AIR PRESSURE - PSIG
120
22 1 26 4
25
27 5
501230
24
3
Cap Assembly #501263
S200-S16
23
2
28 6
86
38
29 30
39
9 Main Valve Assembly #501261
51
7
53
31
43
10 12
46
34
14
Piston Assembly #501266
37
18
20 21
85
82
79 78
48
55 57
56
63 58
63
62
67
83
19
49
64
36
17
47
54 Trigger Assembly #501048
50
35
16
54
44
45
32
33
11
15
51
41 42
8
13
40
15
52
65
68
66
84 76
74
78
75
79 51 81
73
69
70
71 72
77 80 WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool's operation and present a safety hazard.
61
59 46 60
ACCESSORIES
Sequential Operating Kit This special attachment is designed for sequential operation (stops "contact" firing). The operator must depress and hold the work contacting element against the worksurface before pulling the trigger. This sequence must be repeated each time the tool drives a fastener.
Part No. 501039
Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system. Lubricants and Loctite Chemplex 710 Lubricant 1 lb. Part No. 403734 Lubricant 5 gram tubes Part No. 219188 Loctite 242 (Blue) 1 oz. Part No. 093500 Lubricating Oil 16 oz. Part No. 403720 Lubricating Oil 8 oz. with Antifreeze Part No. 219090
SEQUENTIAL OPERATING KIT 1
Part No. 1X0713
Belt Hook Attaches to tool enabling you to carry tool on your belt. Part No. 500955
88
91
21
242
T
AN
IC
BR
LU
&
34
37
40
EX
PL
EM
CH
R
NE
EA
CL
LOCTITE
Safety Glasses Clear
Tool Cleaner Ideal cleaner for all Paslode tools. Part No. 219348 Vinyl Siding Work Contacting Element This attachment allows the WCE to be adjusted to ensure the gap between the staple and siding. This enables positive placement of staple leg in center of siding slot which eliminates cracking.
Part No. 401382
Trigger Valve Repair Kit This kit repairs all trigger valve air leaks. Part No. 219224
Part No. 219051
SAFETY INSTRUCTIONS
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
WEAR EYE AND HEARING PROTECTION
60
0
120
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
120
0
60
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day. Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
60
0
120
Printed in U.S.A. © 2017 Illinois Tool Works, Inc.
120
0
60
P
An Illinois Tool Works Company 155 Harlem Avenue Glenview, IL 60025
501349-10 02/17
